Commercial Gas Engineer Salary up to £48,000 Trevett Services are working with a regional and reputable Building Services and FM Organisation who are looking to bring on an experienced Commercial Gas Engineer to assist on their new retail contract covering the Manchester area. This is a full time, permanent role and an excellent opportunity to join an established FM provider. Company Benefits: Company van with a fuel card. Laptop/PDA/Mobile Phone, any specialist tools supplied, PPE. Company benefits portal with discounts across various retail, restaurants and shopping Excellent training benefits within the company Additional travel paid Key Responsibilities: Responsible for breakdown, service and maintenance works on a range of commercial and domestic heating systems Responsible for minor installation of HAV systems, fault finding and remedial works Carry out Planned preventative maintenance on a variety of gas appliances, heating systems and hot & cold water systems Diagnose faults on gas boilers, heating systems, hot & cold-water systems and carry out remedial repairs Attend emergency gas leaks and make safe as required Qualifications: Be gas safe registered (Essential) Hold the relevant gas certifications- CODNCO1, ICPN1, CIGA1, CORT1, TPCP1a (Essential) OFTEC accreditation OFT10-101, OFT10-105E, OFT10-600a (Desirable) City & Guilds or NVQ in relevant mechanical discipline (or relevant experience) Experience of working in a commercial environment For this full time, permanent role you will receive a salary ofup to £48,000 per annum with great additional opportunities. JBRP1_UKTJ
May 02, 2024
Full time
Commercial Gas Engineer Salary up to £48,000 Trevett Services are working with a regional and reputable Building Services and FM Organisation who are looking to bring on an experienced Commercial Gas Engineer to assist on their new retail contract covering the Manchester area. This is a full time, permanent role and an excellent opportunity to join an established FM provider. Company Benefits: Company van with a fuel card. Laptop/PDA/Mobile Phone, any specialist tools supplied, PPE. Company benefits portal with discounts across various retail, restaurants and shopping Excellent training benefits within the company Additional travel paid Key Responsibilities: Responsible for breakdown, service and maintenance works on a range of commercial and domestic heating systems Responsible for minor installation of HAV systems, fault finding and remedial works Carry out Planned preventative maintenance on a variety of gas appliances, heating systems and hot & cold water systems Diagnose faults on gas boilers, heating systems, hot & cold-water systems and carry out remedial repairs Attend emergency gas leaks and make safe as required Qualifications: Be gas safe registered (Essential) Hold the relevant gas certifications- CODNCO1, ICPN1, CIGA1, CORT1, TPCP1a (Essential) OFTEC accreditation OFT10-101, OFT10-105E, OFT10-600a (Desirable) City & Guilds or NVQ in relevant mechanical discipline (or relevant experience) Experience of working in a commercial environment For this full time, permanent role you will receive a salary ofup to £48,000 per annum with great additional opportunities. JBRP1_UKTJ
Gas Engineers Checkatrade, the UK's number one website for finding quality trades, are looking for experienced and professional Gas Engineers across various regions to help meet homeowner demand. This opportunity will allow you to choose your own hours and areas you wish to work in. A variety of jobs need undertaking including: Central Heating & Boiler Installations Servicing & Repairs Gas Cooker Installations Landlord Gas Safety Checks Air Source Heat Pumps & more Whether you're looking for larger scale work or a few small jobs to fill the gaps in your diary get in touch to see what we have available in your area. Minimum requirements: Proof of ID (Passport/Drivers License) Proof of address Right to live/work in the UK Public Liability Insurance To undertake certain jobs other necessary qualifications may also be required If you're interested or would like more information, apply using the link below and one of our team will be in touch.
May 02, 2024
Full time
Gas Engineers Checkatrade, the UK's number one website for finding quality trades, are looking for experienced and professional Gas Engineers across various regions to help meet homeowner demand. This opportunity will allow you to choose your own hours and areas you wish to work in. A variety of jobs need undertaking including: Central Heating & Boiler Installations Servicing & Repairs Gas Cooker Installations Landlord Gas Safety Checks Air Source Heat Pumps & more Whether you're looking for larger scale work or a few small jobs to fill the gaps in your diary get in touch to see what we have available in your area. Minimum requirements: Proof of ID (Passport/Drivers License) Proof of address Right to live/work in the UK Public Liability Insurance To undertake certain jobs other necessary qualifications may also be required If you're interested or would like more information, apply using the link below and one of our team will be in touch.
Gas Engineers Checkatrade, the UK's number one website for finding quality trades, are looking for experienced and professional Gas Engineers across various regions to help meet homeowner demand. This opportunity will allow you to choose your own hours and areas you wish to work in. A variety of jobs need undertaking including: Central Heating & Boiler Installations Servicing & Repairs Gas Cooker Installations Landlord Gas Safety Checks Air Source Heat Pumps & more Whether you're looking for larger scale work or a few small jobs to fill the gaps in your diary get in touch to see what we have available in your area. Minimum requirements: Proof of ID (Passport/Drivers License) Proof of address Right to live/work in the UK Public Liability Insurance To undertake certain jobs other necessary qualifications may also be required If you're interested or would like more information, apply using the link below and one of our team will be in touch.
May 02, 2024
Full time
Gas Engineers Checkatrade, the UK's number one website for finding quality trades, are looking for experienced and professional Gas Engineers across various regions to help meet homeowner demand. This opportunity will allow you to choose your own hours and areas you wish to work in. A variety of jobs need undertaking including: Central Heating & Boiler Installations Servicing & Repairs Gas Cooker Installations Landlord Gas Safety Checks Air Source Heat Pumps & more Whether you're looking for larger scale work or a few small jobs to fill the gaps in your diary get in touch to see what we have available in your area. Minimum requirements: Proof of ID (Passport/Drivers License) Proof of address Right to live/work in the UK Public Liability Insurance To undertake certain jobs other necessary qualifications may also be required If you're interested or would like more information, apply using the link below and one of our team will be in touch.
People Source Consulting Ltd
Edinburgh, Midlothian
Title: SC Cleared Support Engineer Duration: 2 Months Classification: Inside IR35 Day Rate: £135-£145 per day Location: Edinburgh, Fully Onsite Key Skills.Active Security Clearance* Job Description: We are currently seeking a SC Clearedc Support Engineer to join our team based in Edinburgh. As a Support Engineer, you will play a crucial role in providing desktop support to on-site users as well as remote support to users located in London, Leeds, and home locations. The role involves supporting mainly HP kit, peripherals such as docking stations, keyboards & mice, iPhones, and Samsung phones in a Windows 10/11 environment. Additional responsibilities include software installation and configuration, cabling and patching, and providing excellent customer service. Knowledge of video conferencing and telephony support is preferred but not essential. Key Responsibilities: Provide desktop support to on-site users Offer remote support to users in London, Leeds, and home locations Support HP kit, peripherals, iPhones, and Samsung phones Install and configure software applications Handle cabling and patching tasks Demonstrate proficiency in iPhone and Samsung phone support Administer video conferencing and telephony support when required Maintain a high level of administration, call management, and accountability Additional Requirements: Candidates must have active SC clearance and have no CCJ's Application Process: If you are interested in this position, please apply with your latest CV detailing your relevant experience and qualifications. Please only apply if you have active security clearance. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
May 01, 2024
Contractor
Title: SC Cleared Support Engineer Duration: 2 Months Classification: Inside IR35 Day Rate: £135-£145 per day Location: Edinburgh, Fully Onsite Key Skills.Active Security Clearance* Job Description: We are currently seeking a SC Clearedc Support Engineer to join our team based in Edinburgh. As a Support Engineer, you will play a crucial role in providing desktop support to on-site users as well as remote support to users located in London, Leeds, and home locations. The role involves supporting mainly HP kit, peripherals such as docking stations, keyboards & mice, iPhones, and Samsung phones in a Windows 10/11 environment. Additional responsibilities include software installation and configuration, cabling and patching, and providing excellent customer service. Knowledge of video conferencing and telephony support is preferred but not essential. Key Responsibilities: Provide desktop support to on-site users Offer remote support to users in London, Leeds, and home locations Support HP kit, peripherals, iPhones, and Samsung phones Install and configure software applications Handle cabling and patching tasks Demonstrate proficiency in iPhone and Samsung phone support Administer video conferencing and telephony support when required Maintain a high level of administration, call management, and accountability Additional Requirements: Candidates must have active SC clearance and have no CCJ's Application Process: If you are interested in this position, please apply with your latest CV detailing your relevant experience and qualifications. Please only apply if you have active security clearance. People Source Consulting Ltd is acting as an Employment Business in relation to this vacancy. People Source specialise in technology recruitment across niche markets including Information Technology, Digital TV, Digital Marketing, Project and Programme Management, SAP, Digital and Consumer Electronics, Air Traffic Management, Management Consultancy, Business Intelligence, Manufacturing, Telecoms, Public Sector, Healthcare, Finance and Oil & Gas.
Air con installation engineer Lincolnshire Basic salary up to 40K/ 40 hour week/ Door to door travel/ 28 days hol/ 3% pension/ van, fuel card - private use/ Local Lincolnshire work/ No call out rota A building services company who have been established for over 20 years that specialise in Mechanical, Electrical, Refrigeration and air conditioning. Working on contracts such as Supermarkets and Banks. IF YOU WOULD LIKE TO DISCUSS IN FURTHER DETAILS PLEASE CALL CHANTAL ON (phone number removed) Key Responsibilities: Service, maintenance and repairs of VRV, VRF, chillers, Split Systems, and AHUs Conducting routine maintenance on air conditioning systems in accordance with the manufacturer's guidelines and industry standards Troubleshooting and diagnosing problems with air conditioning systems, and repairing or replacing components as required Ensuring that all work is carried out in compliance with health and safety regulations Responding promptly to emergency call-outs and carrying out repairs as necessary Field based meeting clients - Customer facing position Essential Qualifications / Experience: FGAS or NVQ level 2 refrigeration / air conditioning Full UK drivers license PACKAGE 38,000 - 40,000 40 hours per week Door to door 20 days + BH - rising with service after 3 years Van and fuel card - reasonable private use 3% pension contribution Working away food allowance/ Hotels paid for if required Most work is Lincolnshire based however on the odd occasion you may have to travel the UK Free eye test Uniform NO CALL OUT
May 01, 2024
Full time
Air con installation engineer Lincolnshire Basic salary up to 40K/ 40 hour week/ Door to door travel/ 28 days hol/ 3% pension/ van, fuel card - private use/ Local Lincolnshire work/ No call out rota A building services company who have been established for over 20 years that specialise in Mechanical, Electrical, Refrigeration and air conditioning. Working on contracts such as Supermarkets and Banks. IF YOU WOULD LIKE TO DISCUSS IN FURTHER DETAILS PLEASE CALL CHANTAL ON (phone number removed) Key Responsibilities: Service, maintenance and repairs of VRV, VRF, chillers, Split Systems, and AHUs Conducting routine maintenance on air conditioning systems in accordance with the manufacturer's guidelines and industry standards Troubleshooting and diagnosing problems with air conditioning systems, and repairing or replacing components as required Ensuring that all work is carried out in compliance with health and safety regulations Responding promptly to emergency call-outs and carrying out repairs as necessary Field based meeting clients - Customer facing position Essential Qualifications / Experience: FGAS or NVQ level 2 refrigeration / air conditioning Full UK drivers license PACKAGE 38,000 - 40,000 40 hours per week Door to door 20 days + BH - rising with service after 3 years Van and fuel card - reasonable private use 3% pension contribution Working away food allowance/ Hotels paid for if required Most work is Lincolnshire based however on the odd occasion you may have to travel the UK Free eye test Uniform NO CALL OUT
Field Service/Commissioning Engineer Location: Midlands Salary: £40k - £45k dep on exp + overtime + company vehicle The Company: Due to continued expansion a vacancy has arisen for a dedicated and conscientious Service & Commissioning Engineer to join their team. The role will involve planned maintenance and service of both fixed and portable gas detection instruments, together with service call outs and commissioning of fixed detection systems. This represents a great opportunity within a successful, growing company for a candidate looking to develop their career within a focused but friendly team. The Role: Installation & Commissioning: Perform installation and commissioning of fixed gas detection systems at client sites according to engineering drawings, specifications, and project requirements. Configure system settings, calibrate sensors, and conduct functional tests to ensure proper operation and compliance with regulatory standards. Service & Maintenance: Conduct routine service visits to inspect, troubleshoot, and maintain fixed gas detection systems. Perform preventive maintenance tasks, such as calibration, and sensor replacement, to ensure optimal system performance and reliability. Calibration: Execute calibration procedures for gas sensors, transmitters, controllers, and alarm devices to maintain accurate and reliable gas detection capabilities. Utilise calibration equipment and software tools to verify sensor accuracy and responsiveness. Troubleshooting: Diagnose and resolve technical issues with fixed gas detection systems, including sensor drift, communication errors, power supply failures, and alarm malfunctions. Utilise troubleshooting techniques and diagnostic tools to identify root causes and implement effective solutions. Repair & Replacement: Coordinate repair or replacement of faulty components, modules, or subsystems within fixed gas detection systems. Work closely with vendors, suppliers, and internal support teams to procure replacement parts and expedite repairs to minimise system downtime. Documentation: Maintain detailed service records, inspection reports, and calibration logs for each fixed gas detection system. Ensure compliance with regulatory requirements and documentation standards, including recordkeeping for calibration certificates and equipment maintenance history. Customer Support: Provide technical support and assistance to clients regarding the operation, troubleshooting, and maintenance of fixed gas detection systems. Address customer inquiries, concerns, and service requests in a timely and professional manner to ensure customer satisfaction. Requirements: HNC or HND in an engineering subject or an equivalent technical certification in engineering, electronics, or a related field. Previous experience in field service, maintenance, or commissioning of industrial instrumentation, preferably fixed gas detection systems. Proficiency in interpreting engineering drawings, schematics, and technical documentation.= Strong knowledge of gas detection principles, sensor technologies, and control systems. Experience with calibration equipment, testing instruments, and diagnostic tools used in gas detection applications. Excellent troubleshooting skills and ability to analyse complex technical problems systematically. Effective communication skills for interacting with clients, colleagues, and stakeholders in field service environments. Commitment to adhering to safety protocols, regulatory standards, and industry best practices in gas detection services.
May 01, 2024
Full time
Field Service/Commissioning Engineer Location: Midlands Salary: £40k - £45k dep on exp + overtime + company vehicle The Company: Due to continued expansion a vacancy has arisen for a dedicated and conscientious Service & Commissioning Engineer to join their team. The role will involve planned maintenance and service of both fixed and portable gas detection instruments, together with service call outs and commissioning of fixed detection systems. This represents a great opportunity within a successful, growing company for a candidate looking to develop their career within a focused but friendly team. The Role: Installation & Commissioning: Perform installation and commissioning of fixed gas detection systems at client sites according to engineering drawings, specifications, and project requirements. Configure system settings, calibrate sensors, and conduct functional tests to ensure proper operation and compliance with regulatory standards. Service & Maintenance: Conduct routine service visits to inspect, troubleshoot, and maintain fixed gas detection systems. Perform preventive maintenance tasks, such as calibration, and sensor replacement, to ensure optimal system performance and reliability. Calibration: Execute calibration procedures for gas sensors, transmitters, controllers, and alarm devices to maintain accurate and reliable gas detection capabilities. Utilise calibration equipment and software tools to verify sensor accuracy and responsiveness. Troubleshooting: Diagnose and resolve technical issues with fixed gas detection systems, including sensor drift, communication errors, power supply failures, and alarm malfunctions. Utilise troubleshooting techniques and diagnostic tools to identify root causes and implement effective solutions. Repair & Replacement: Coordinate repair or replacement of faulty components, modules, or subsystems within fixed gas detection systems. Work closely with vendors, suppliers, and internal support teams to procure replacement parts and expedite repairs to minimise system downtime. Documentation: Maintain detailed service records, inspection reports, and calibration logs for each fixed gas detection system. Ensure compliance with regulatory requirements and documentation standards, including recordkeeping for calibration certificates and equipment maintenance history. Customer Support: Provide technical support and assistance to clients regarding the operation, troubleshooting, and maintenance of fixed gas detection systems. Address customer inquiries, concerns, and service requests in a timely and professional manner to ensure customer satisfaction. Requirements: HNC or HND in an engineering subject or an equivalent technical certification in engineering, electronics, or a related field. Previous experience in field service, maintenance, or commissioning of industrial instrumentation, preferably fixed gas detection systems. Proficiency in interpreting engineering drawings, schematics, and technical documentation.= Strong knowledge of gas detection principles, sensor technologies, and control systems. Experience with calibration equipment, testing instruments, and diagnostic tools used in gas detection applications. Excellent troubleshooting skills and ability to analyse complex technical problems systematically. Effective communication skills for interacting with clients, colleagues, and stakeholders in field service environments. Commitment to adhering to safety protocols, regulatory standards, and industry best practices in gas detection services.
Mydas Recruitment are specialist in sourcing skilled engineers. Our client, a leading organisation in the construction, wind energy & renewables sector have a requirement for a maintenance coordinator/ planner for an upcoming offshore wind energy project. As the project Quality Advisor, you will support the execution and integrity management of the Hornsea 03 Wind Farm project. You will be accountable for all Quality activities within assigned work packages, ensuring compliance with contractual requirements, projectQMS, regulatory and legal requirements. The Quality advisor promotes and provides professional expert knowledge and guidance to managers, supervisors, and employees onquality practices, safety standards, and legal regulations, and supports identification and elimination of potential quality issues and ensures control measures are in place to reduce the cost of poor quality and non-conformances within the project. Role Responsibilities: Supports the development and implementation of project quality assurance, management and control strategy. Provides Quality support and direction to the Project team for assigned work packages. Quality Reviews on sites by validating if Contractors are following the procedures and checklists as referred in the Inspection Test Plan (ITP), if requested by the Project Quality Manager Reporting, monitoring any NCR occurring, and communicating any Lessons Learned to stakeholders e.g., the Design Risk Assessment team or Construction Management. Management of Quality performance data incl. supplier due diligence, audit, non-conformance, root cause analysis, key performance indictors and objectives for assigned work packages. Performing Quality due diligence and readiness checks in relation to onshore and offshore activities Manages quality assurance and control in relation to supplier and subcontractor evaluation, management and product / service delivery across a diverse, multi-tiered supply chain. Collaboration with Package and Engineering technical authorities e.g., Design, Transport & Installation, Construction, Fabrication (including NDT and Coatings) processes to ensure alignment with Quality requirements and deliverables. Proactive engagement with Lessons Learned capture and implementation throughout the project lifecycle. Management and delivery of the project audit programme within the assigned project work package(s) Participate and contribute to all relevant site and project quality meetings Deputises for the Project Quality Manager as required Other tasks as required and agreed in cooperation with Project QHSE Manager Participate in regular quality meetings with contractor and package representatives Perform quality presentations at kick off meetings Quality inspection and site audits Entry of quality incidents and proactive measures in Synergi Monitor for trends in quality KPIs Facilitate Quality investigations in identifying root causes and corrective actions Qualification & Requirements: Minimum 3-5 years work experience with Quality, ideally from relevant fields of industry with relevant academic or technical background Experienced Projects and Operations Quality Professional. Have a relevant technical or academic background, followed by documented experience of managing Quality within offshore projects Lead by example when it comes to Quality and can remain calm even if pressure is getting high and resistance is met by colleagues, contractors, or stakeholders Do not take No for an answer if we can improve Quality and will strive to have high Quality standards. Strong knowledge of Quality Standards: ISO 9001 Series Proven problem-solving skills, analytical and systematic working approach Extensive knowledge and application of the Quality discipline within Projects and Operations; Renewables / Oil and Gas Sector knowledge and experience is desirable. Strong working knowledge of technical codes and standards as relevant to Fabrication, Electrical & Mechanical systems and Construction. Strong working knowledge of contractual mechanisms applied within Renewables / Oil and Gas Projects and associated Product and Service delivery is desirable. Demonstrable experience in dealing with 3rd party contractors in relation to Quality. Excellent interpersonal skills, strong communication and presentation skills with international and culturally diverse teams Qualified and experienced Lead Auditor(desirable) Desirable to have Global Wind Organization Standard Basic Safety Training (BST), and Oil & Gas UK medical certificate (incl. Chester step test) or equivalent, or have the ability to pass. IT literate (Microsoft office package, knowledge of Synergi is an advantage)Quality degree qualification on Diploma or BS level 12 Month contractcompetitive rate JBRP1_UKTJ
May 01, 2024
Full time
Mydas Recruitment are specialist in sourcing skilled engineers. Our client, a leading organisation in the construction, wind energy & renewables sector have a requirement for a maintenance coordinator/ planner for an upcoming offshore wind energy project. As the project Quality Advisor, you will support the execution and integrity management of the Hornsea 03 Wind Farm project. You will be accountable for all Quality activities within assigned work packages, ensuring compliance with contractual requirements, projectQMS, regulatory and legal requirements. The Quality advisor promotes and provides professional expert knowledge and guidance to managers, supervisors, and employees onquality practices, safety standards, and legal regulations, and supports identification and elimination of potential quality issues and ensures control measures are in place to reduce the cost of poor quality and non-conformances within the project. Role Responsibilities: Supports the development and implementation of project quality assurance, management and control strategy. Provides Quality support and direction to the Project team for assigned work packages. Quality Reviews on sites by validating if Contractors are following the procedures and checklists as referred in the Inspection Test Plan (ITP), if requested by the Project Quality Manager Reporting, monitoring any NCR occurring, and communicating any Lessons Learned to stakeholders e.g., the Design Risk Assessment team or Construction Management. Management of Quality performance data incl. supplier due diligence, audit, non-conformance, root cause analysis, key performance indictors and objectives for assigned work packages. Performing Quality due diligence and readiness checks in relation to onshore and offshore activities Manages quality assurance and control in relation to supplier and subcontractor evaluation, management and product / service delivery across a diverse, multi-tiered supply chain. Collaboration with Package and Engineering technical authorities e.g., Design, Transport & Installation, Construction, Fabrication (including NDT and Coatings) processes to ensure alignment with Quality requirements and deliverables. Proactive engagement with Lessons Learned capture and implementation throughout the project lifecycle. Management and delivery of the project audit programme within the assigned project work package(s) Participate and contribute to all relevant site and project quality meetings Deputises for the Project Quality Manager as required Other tasks as required and agreed in cooperation with Project QHSE Manager Participate in regular quality meetings with contractor and package representatives Perform quality presentations at kick off meetings Quality inspection and site audits Entry of quality incidents and proactive measures in Synergi Monitor for trends in quality KPIs Facilitate Quality investigations in identifying root causes and corrective actions Qualification & Requirements: Minimum 3-5 years work experience with Quality, ideally from relevant fields of industry with relevant academic or technical background Experienced Projects and Operations Quality Professional. Have a relevant technical or academic background, followed by documented experience of managing Quality within offshore projects Lead by example when it comes to Quality and can remain calm even if pressure is getting high and resistance is met by colleagues, contractors, or stakeholders Do not take No for an answer if we can improve Quality and will strive to have high Quality standards. Strong knowledge of Quality Standards: ISO 9001 Series Proven problem-solving skills, analytical and systematic working approach Extensive knowledge and application of the Quality discipline within Projects and Operations; Renewables / Oil and Gas Sector knowledge and experience is desirable. Strong working knowledge of technical codes and standards as relevant to Fabrication, Electrical & Mechanical systems and Construction. Strong working knowledge of contractual mechanisms applied within Renewables / Oil and Gas Projects and associated Product and Service delivery is desirable. Demonstrable experience in dealing with 3rd party contractors in relation to Quality. Excellent interpersonal skills, strong communication and presentation skills with international and culturally diverse teams Qualified and experienced Lead Auditor(desirable) Desirable to have Global Wind Organization Standard Basic Safety Training (BST), and Oil & Gas UK medical certificate (incl. Chester step test) or equivalent, or have the ability to pass. IT literate (Microsoft office package, knowledge of Synergi is an advantage)Quality degree qualification on Diploma or BS level 12 Month contractcompetitive rate JBRP1_UKTJ
This is a great opportunity for an enthusiastic individual to join our Process Safety department. This position will be responsible for providing engineering solutions compliant with Health & Safety regulations, industry codes and standards as well as the assurance of such. This role will support onshore COMAH and offshore OSDR/SCR facilities, providing technical leadership and engineering guidance across all departments including operations and maintenance, wells, projects and decommissioning. For the right candidate there may be the opportunity to lead a team of Safety Engineers. This is a full-time office-based role (Mon-Friday) with infrequent offshore visits. Key Responsibilities Include: Provide technical guidance, coaching and advice to Operations, Engineering and other support teams to ensure compliance with applicable legislation such as COMAH, OSDR/SCR, PFEER, DSEAR, DCR, PSR, PSSR, SOLAS. Develop and lead the programme planning and support for safety studies including but not limited to QRA, FERA, EERA, SGIA, TRIA, RAMS. Responsibility includes budget preparation and control with due considerations for enlisting the support of external consultants to manage peaks in workload. Perform, check and assure consequence modelling including but not limited to gas plume dispersion, flaring and venting, well blowout, thermal radiation, pool and jet fire, blast and overpressure, smoke and gas ingress. Performance standard owner for PFEP, AFP, TR Integrity and Escape and Evacuation, with responsibility for maintaining, updating and assuring these standards. Responsible for the authorisation of Operational Risk Assessments (ORA) for any deviation from these performance standards. Carry out assurance visits on both onshore and offshore operational sites. Support the delivery and maintenance of Safety Cases and COMAH Reports, update and develop underlying safety studies demonstrating how PUK control MAHs to ALARP. Provide technical input and guidance for through reviews, material changes, well notifications, COMOPS and decommissioning. Instrumental role in ensuring all engineering and plant modifications follow a robust Management of Change (MOC) process and are thoroughly assessed for SECE impact. Provide technical guidance on what modification is likely to constitute a material change and ensure the Safety Case and/or COMAH reports are updated to accurately reflect the change. Be able to lead and/or facilitate safety workshops such as HAZID, HAZOP and LOPA for projects and operating facilities ensuring adequate safeguards are identified, be able to recommend additional safeguards as required to meet safety targets. Be able to overcome operational challenges with practical, fit for purpose solutions suitable for ageing installations. Own and update relevant SEMS documentation ensuring all changes to HSE legislations, codes, guidelines and industry standards are interpreted correctly and incorporated. Liaise with regulatory bodies on matters of HSE, understand regulatory drivers and provide guidance to PUK Senior Management on matters of regulatory compliance. Support regulatory inspections inclusive of presentation, reporting and timely delivery on commitments demonstrating compliance with our installation Safety Cases and COMAH reports. Participate and lead incident investigations, complete Root Cause Analysis, delivering reports of a high standard that include SMART corrective and preventative actions. Develop and mentor graduate and more junior engineers. SEC & Personal Safety Tasks: SNS Management of Change - Technical Reviewer SNS Operational Risk Assessment - ORA Engineer Performance Standards - Owner SEMS Documentation - Owner Software Experience: FLARESIM PHAST (Multi-component, 3D) FLACS-CFD, KFX or similar PIPENET Aspen Hysys Bowtie XP or similar PHA Pro Key Requirements Include: Qualifications: BEng/ MEng in either Chemical/ Process or Mechanical engineering, other qualifications may be considered depending on experience Chartered engineer desirable Valid BOSIET/FOET, MIST, CA-EBS desirable however training will be provided Experience: 15+ years' experience with top tier COMAH operators or Offshore UKCS Oil and Gas Operators Thorough understanding of OSRD/SCR2015 and COMAH regulations, including supporting legislation such as PFEER, DSEAR, PSR etc Experience leading a team and developing more junior engineers Experience working with the Competent Authority essential Good knowledge of planning, cost control and document management processes Personal Attributes: Solution based thinker, natural problem solver Adept communicator with the ability to influence decision makers Strong team player Works efficiently to achieve tight deadlines Exceptional organisational skills Meticulous attention to detail Benefits: At Perenco we value and reward our people, offering competitive salaries and a wide range of benefits including: Discretionary Bonus Private Medical Insurance Flexible Benefit Allowance Life Assurance Excellent Pension Provision 25 days holiday + bank holidays Flex Days Profit 'Units' Sharing Scheme
May 01, 2024
Full time
This is a great opportunity for an enthusiastic individual to join our Process Safety department. This position will be responsible for providing engineering solutions compliant with Health & Safety regulations, industry codes and standards as well as the assurance of such. This role will support onshore COMAH and offshore OSDR/SCR facilities, providing technical leadership and engineering guidance across all departments including operations and maintenance, wells, projects and decommissioning. For the right candidate there may be the opportunity to lead a team of Safety Engineers. This is a full-time office-based role (Mon-Friday) with infrequent offshore visits. Key Responsibilities Include: Provide technical guidance, coaching and advice to Operations, Engineering and other support teams to ensure compliance with applicable legislation such as COMAH, OSDR/SCR, PFEER, DSEAR, DCR, PSR, PSSR, SOLAS. Develop and lead the programme planning and support for safety studies including but not limited to QRA, FERA, EERA, SGIA, TRIA, RAMS. Responsibility includes budget preparation and control with due considerations for enlisting the support of external consultants to manage peaks in workload. Perform, check and assure consequence modelling including but not limited to gas plume dispersion, flaring and venting, well blowout, thermal radiation, pool and jet fire, blast and overpressure, smoke and gas ingress. Performance standard owner for PFEP, AFP, TR Integrity and Escape and Evacuation, with responsibility for maintaining, updating and assuring these standards. Responsible for the authorisation of Operational Risk Assessments (ORA) for any deviation from these performance standards. Carry out assurance visits on both onshore and offshore operational sites. Support the delivery and maintenance of Safety Cases and COMAH Reports, update and develop underlying safety studies demonstrating how PUK control MAHs to ALARP. Provide technical input and guidance for through reviews, material changes, well notifications, COMOPS and decommissioning. Instrumental role in ensuring all engineering and plant modifications follow a robust Management of Change (MOC) process and are thoroughly assessed for SECE impact. Provide technical guidance on what modification is likely to constitute a material change and ensure the Safety Case and/or COMAH reports are updated to accurately reflect the change. Be able to lead and/or facilitate safety workshops such as HAZID, HAZOP and LOPA for projects and operating facilities ensuring adequate safeguards are identified, be able to recommend additional safeguards as required to meet safety targets. Be able to overcome operational challenges with practical, fit for purpose solutions suitable for ageing installations. Own and update relevant SEMS documentation ensuring all changes to HSE legislations, codes, guidelines and industry standards are interpreted correctly and incorporated. Liaise with regulatory bodies on matters of HSE, understand regulatory drivers and provide guidance to PUK Senior Management on matters of regulatory compliance. Support regulatory inspections inclusive of presentation, reporting and timely delivery on commitments demonstrating compliance with our installation Safety Cases and COMAH reports. Participate and lead incident investigations, complete Root Cause Analysis, delivering reports of a high standard that include SMART corrective and preventative actions. Develop and mentor graduate and more junior engineers. SEC & Personal Safety Tasks: SNS Management of Change - Technical Reviewer SNS Operational Risk Assessment - ORA Engineer Performance Standards - Owner SEMS Documentation - Owner Software Experience: FLARESIM PHAST (Multi-component, 3D) FLACS-CFD, KFX or similar PIPENET Aspen Hysys Bowtie XP or similar PHA Pro Key Requirements Include: Qualifications: BEng/ MEng in either Chemical/ Process or Mechanical engineering, other qualifications may be considered depending on experience Chartered engineer desirable Valid BOSIET/FOET, MIST, CA-EBS desirable however training will be provided Experience: 15+ years' experience with top tier COMAH operators or Offshore UKCS Oil and Gas Operators Thorough understanding of OSRD/SCR2015 and COMAH regulations, including supporting legislation such as PFEER, DSEAR, PSR etc Experience leading a team and developing more junior engineers Experience working with the Competent Authority essential Good knowledge of planning, cost control and document management processes Personal Attributes: Solution based thinker, natural problem solver Adept communicator with the ability to influence decision makers Strong team player Works efficiently to achieve tight deadlines Exceptional organisational skills Meticulous attention to detail Benefits: At Perenco we value and reward our people, offering competitive salaries and a wide range of benefits including: Discretionary Bonus Private Medical Insurance Flexible Benefit Allowance Life Assurance Excellent Pension Provision 25 days holiday + bank holidays Flex Days Profit 'Units' Sharing Scheme
Gas Engineer Rubix M&E is the leading Mechanical and Electrical recruitment agency in the UK. Our reputation is built on our commitment to excellence and delivering exceptional service to our clients and candidates. We are recruiting for competent Gas Engineers - we have multiple opportunities for Gas Engineers who are experienced either Servicing and Breakdowns or Boiler installation. Permanent package: between 40,000 and 80,000 with top company earners, earning in excess of this. Subcontracting earnings: between 1,000 to 2,000 per week. Required qualifications: - CCN1 Gas Qualification. Job titles that may also be applicable: Service & Repair Gas Engineer, Gas / Boiler Installer, Gas / Boiler Service Engineer. Rubix M&E are trusted partners of leading; Blue-chip organisations, Energy & Heating suppliers, Housing Associations, Contractors and Private customers. Efficiency, customer service and safety are the core focuses. Our clients are currently looking for a dedicated, skilled Gas Engineer to join their growing team. We are also recruiting for; Renewable Electricians, Smart Meter Installs, Dual Fuel Installers, Metering Installer, Smart Meter Experts, First Call Operatives, FCO's, I&C Technician, EV Installers, Smart Meter Auditors, Dual Fuel Auditors, Field Team Leaders (Smart Metering / Dual Fuel) to name a few. Apply now or call a member of our specialised M&E recruiters on (phone number removed). You can also register your CV on our website, (url removed) to stay up to date with our latest M&E vacancies. Rubix M&E - The UK's no.1 Mechanical and Electrical Recruitment Agency.
May 01, 2024
Full time
Gas Engineer Rubix M&E is the leading Mechanical and Electrical recruitment agency in the UK. Our reputation is built on our commitment to excellence and delivering exceptional service to our clients and candidates. We are recruiting for competent Gas Engineers - we have multiple opportunities for Gas Engineers who are experienced either Servicing and Breakdowns or Boiler installation. Permanent package: between 40,000 and 80,000 with top company earners, earning in excess of this. Subcontracting earnings: between 1,000 to 2,000 per week. Required qualifications: - CCN1 Gas Qualification. Job titles that may also be applicable: Service & Repair Gas Engineer, Gas / Boiler Installer, Gas / Boiler Service Engineer. Rubix M&E are trusted partners of leading; Blue-chip organisations, Energy & Heating suppliers, Housing Associations, Contractors and Private customers. Efficiency, customer service and safety are the core focuses. Our clients are currently looking for a dedicated, skilled Gas Engineer to join their growing team. We are also recruiting for; Renewable Electricians, Smart Meter Installs, Dual Fuel Installers, Metering Installer, Smart Meter Experts, First Call Operatives, FCO's, I&C Technician, EV Installers, Smart Meter Auditors, Dual Fuel Auditors, Field Team Leaders (Smart Metering / Dual Fuel) to name a few. Apply now or call a member of our specialised M&E recruiters on (phone number removed). You can also register your CV on our website, (url removed) to stay up to date with our latest M&E vacancies. Rubix M&E - The UK's no.1 Mechanical and Electrical Recruitment Agency.
This is an opportunity to join an organisation offering great benefits and alsocertified as aGreat Place to Work! If you are an experienced gas/heating engineer who wants to join somewhere that provides and maintains safe, secure and warm places that people are proud to call home - you belong at Bromford. As part of our service delivery team, youll be there for our customers whenever they need you. The main aspect of the role will be installing a wide variety of boilers and heating systems from, combination boilers to full heating systems to meet our customers needs and completing all relevant safety checks. You willensure that all our properties and our customers receive the highest levels of service. You will also be working on air sourced heat pumps (training will be provided). You will be replacing Central Heating boilers and Heating Systems.You will complete all relevant safety checks and provide electronic gas certification upon completion of the job. You may work alone, or paired with a second Gas Installer, to complete our Gas Installation Program, within budget and timescales. You will be provided with the associated battery-powered tools to complete your tasks, and be provided with a Calibrated Flue Gas Analyser, to comply with Gas Safe Regulations. This is a mobile role covering Gloucestershire region. the Cotswoldsand other areas as requestedto suit programme of works. Due to the nature of the role, an enhanced DBS check will be completed for the successful applicant. The ideal candidate will hold the following: CCN1: ACS Gas Safe - Core Gas Safety Certificate or Equivalent CENWAT: Domestic Gas Fired Central Heating / Hot Water Boiler & Circulators, 70KW and Instantaneous Water Heating Appliances CKR1: ACS Gas Safe - Cookers and Hobs HTR1: ACS Gas Safe - Gas Fires Unvented Systems, advantageous but not essential OFTEC and Air Source/ Ground Source, would be beneficial. If not held, be prepared to train to obtain qualifications Full, clean driving licence. Your previous experience may be in roles such as heating engineer, gas engineer,gas heating engineer,plumbing and heating engineer. Closing date for applications is Sunday 5 May 2024. JBRP1_UKTJ
May 01, 2024
Full time
This is an opportunity to join an organisation offering great benefits and alsocertified as aGreat Place to Work! If you are an experienced gas/heating engineer who wants to join somewhere that provides and maintains safe, secure and warm places that people are proud to call home - you belong at Bromford. As part of our service delivery team, youll be there for our customers whenever they need you. The main aspect of the role will be installing a wide variety of boilers and heating systems from, combination boilers to full heating systems to meet our customers needs and completing all relevant safety checks. You willensure that all our properties and our customers receive the highest levels of service. You will also be working on air sourced heat pumps (training will be provided). You will be replacing Central Heating boilers and Heating Systems.You will complete all relevant safety checks and provide electronic gas certification upon completion of the job. You may work alone, or paired with a second Gas Installer, to complete our Gas Installation Program, within budget and timescales. You will be provided with the associated battery-powered tools to complete your tasks, and be provided with a Calibrated Flue Gas Analyser, to comply with Gas Safe Regulations. This is a mobile role covering Gloucestershire region. the Cotswoldsand other areas as requestedto suit programme of works. Due to the nature of the role, an enhanced DBS check will be completed for the successful applicant. The ideal candidate will hold the following: CCN1: ACS Gas Safe - Core Gas Safety Certificate or Equivalent CENWAT: Domestic Gas Fired Central Heating / Hot Water Boiler & Circulators, 70KW and Instantaneous Water Heating Appliances CKR1: ACS Gas Safe - Cookers and Hobs HTR1: ACS Gas Safe - Gas Fires Unvented Systems, advantageous but not essential OFTEC and Air Source/ Ground Source, would be beneficial. If not held, be prepared to train to obtain qualifications Full, clean driving licence. Your previous experience may be in roles such as heating engineer, gas engineer,gas heating engineer,plumbing and heating engineer. Closing date for applications is Sunday 5 May 2024. JBRP1_UKTJ
Mechanical Services Manager Milton Keynes £53,679.56 per annum Full Time - 36.5 hours per week Permanent Are you a natural leader with a passion for Mechanical Services? We've got an exciting opportunity just for you! Join us as our Mechanical Services Manager and lead a dynamic team to ensure smooth operations and safety across our organisation. From managing heating contracts to maintaining health and safety standards, you'll play a crucial role in keeping everything running smoothly. What you'll be doing Lead a team of five, setting clear objectives for successful mechanical service delivery. Manage our annual gas installation, inspection, and maintenance program, providing technical advice and authorising follow-up work. Oversee equipment maintenance, inspections, and repairs, including asbestos management activities. Manage budgets efficiently to support service delivery. Ensure compliance with health and safety regulations. Continuously review policies and processes to improve efficiency and effectiveness. Manage compliance with health and safety regulations, including Lifting Operations and Lifting Equipment Regulations (LOLER) and Provision and Use of Work Equipment Regulations (PUWER), Maintain a customer-centric approach, promptly addressing issues and providing technical support. Please read the full job description attached before applying. What we're looking for Experience in team management within construction, driving performance excellence. Strong technical skills in fire, gas, legionella, and asbestos management. Commitment to staying updated on legislation and industry best practices. Proficient in contract management and stakeholder engagement. IT proficiency for enhanced service delivery. Strong problem-solving and communication skills. Attention to detail and strong organisational skills. Adaptable to changing priorities and fast-paced environments. While a recognised professional building-related qualification (HND) and membership in a competency body like Gas Safe or AGSM are preferred, significant knowledge and experience in the field are equally valued Perks of working at Grand Union Annual leave of 25 days, rising to 30 days after 5 years of service Generous pension scheme - employer contribution up to 10%. Extra day's leave for no sickness absence in the financial year. Christmas week off (no need to use your annual leave allowance!) Opportunity to buy/sell annual leave. Enhanced maternity, paternity, and adoption leave. Paid emergency and compassionate leave. Life assurance (2x salary). Generous sick pay. Free annual flu jabs. Paid qualification. Plus more - check out the full list of benefits in the attached document! If you're ready to take on this exciting challenge and make a meaningful impact as our Mechanical Services Manager, we want to hear from you! Apply now and embark on a rewarding career journey with us! Important Information We do not provide visa sponsorship; you must be eligible to work in the UK, reside in the UK for the duration of your employment and provide Right to Work evidence. A full driving license is essential for this role. A DBS in required for this role We reserve the right to close the vacancy early in response to an overwhelming number of applications or a change in business priorities. Closing: 10 May Phone screening: 16 May Interviews: 22 May &Safety
May 01, 2024
Full time
Mechanical Services Manager Milton Keynes £53,679.56 per annum Full Time - 36.5 hours per week Permanent Are you a natural leader with a passion for Mechanical Services? We've got an exciting opportunity just for you! Join us as our Mechanical Services Manager and lead a dynamic team to ensure smooth operations and safety across our organisation. From managing heating contracts to maintaining health and safety standards, you'll play a crucial role in keeping everything running smoothly. What you'll be doing Lead a team of five, setting clear objectives for successful mechanical service delivery. Manage our annual gas installation, inspection, and maintenance program, providing technical advice and authorising follow-up work. Oversee equipment maintenance, inspections, and repairs, including asbestos management activities. Manage budgets efficiently to support service delivery. Ensure compliance with health and safety regulations. Continuously review policies and processes to improve efficiency and effectiveness. Manage compliance with health and safety regulations, including Lifting Operations and Lifting Equipment Regulations (LOLER) and Provision and Use of Work Equipment Regulations (PUWER), Maintain a customer-centric approach, promptly addressing issues and providing technical support. Please read the full job description attached before applying. What we're looking for Experience in team management within construction, driving performance excellence. Strong technical skills in fire, gas, legionella, and asbestos management. Commitment to staying updated on legislation and industry best practices. Proficient in contract management and stakeholder engagement. IT proficiency for enhanced service delivery. Strong problem-solving and communication skills. Attention to detail and strong organisational skills. Adaptable to changing priorities and fast-paced environments. While a recognised professional building-related qualification (HND) and membership in a competency body like Gas Safe or AGSM are preferred, significant knowledge and experience in the field are equally valued Perks of working at Grand Union Annual leave of 25 days, rising to 30 days after 5 years of service Generous pension scheme - employer contribution up to 10%. Extra day's leave for no sickness absence in the financial year. Christmas week off (no need to use your annual leave allowance!) Opportunity to buy/sell annual leave. Enhanced maternity, paternity, and adoption leave. Paid emergency and compassionate leave. Life assurance (2x salary). Generous sick pay. Free annual flu jabs. Paid qualification. Plus more - check out the full list of benefits in the attached document! If you're ready to take on this exciting challenge and make a meaningful impact as our Mechanical Services Manager, we want to hear from you! Apply now and embark on a rewarding career journey with us! Important Information We do not provide visa sponsorship; you must be eligible to work in the UK, reside in the UK for the duration of your employment and provide Right to Work evidence. A full driving license is essential for this role. A DBS in required for this role We reserve the right to close the vacancy early in response to an overwhelming number of applications or a change in business priorities. Closing: 10 May Phone screening: 16 May Interviews: 22 May &Safety
Akton are recruiting on behalf of a client who is looking for a Project Manager to manage the Urban Energy projects in the Midlands, the North of England, and Scotland. The key deliverable for this role is the effective management of the construction projects (CHP, gas boilers, heat pumps, Decarbonisation of BU in the midlands & north, new network connections, chilled water, district heating and cooling pipework). Responsibilities To manage the delivery of Mechanical, Electrical and Civil project activities, and coordinate with the Engineers, Designers, Planners & QS/Legal teams. Produce bill of quantity/materials take off. Ensuring all deliverables are to the required standard and specification. Manage the project to ensure all contractual aspects between clients and contractors, ensuring the compliance of all parties, particularly with respect to completion of the project prior to programmed operational start date. To adhere to project delivery systems and procedures. To manage the timely production of O&M manuals with the Principal designer. Develop and maintain effective working relationships with project sponsors and other key stakeholders. Produce weekly/monthly project progress reports. Where applicable, carry out the Principal Contractor role. To work with the planner in order to track, monitor and report project status to senior management. Effective planning, allocation and management of resources. Comply at all times with policies and procedures. Manage and own the project budgets and produce monthly financial reports with the project QS. Coordinate with the Commissioning Manager. Responsible for the quality of delivery and final installation. Coordination with Operation Team. Attend Client and internal BU meetings. Carry out project reporting in line with required deadlines. Identify, monitor, mitigate and manage project and operational risks. Establish and maintain good supplier relations to ensure effective delivery and quality of Installations. Maintain a solution based approach to problems. To work with SHEQ team and CDM Manager to ensure compliance with all Health and Safety & CDM regulations and obligations. Requirements HNC/Degree level required in either a mechanical or electrical discipline. CSCS Project Manager Card SMSTS Qualified NRSWA card First Aid qualified. Experience of delivering multi-million pound M&E/Civil Projects with a diverse project delivery team Extensive Project Management Experience Mechanical/Electrical Engineering Civil Engineering Commercial /contract experience Client presentation /BD experience
May 01, 2024
Full time
Akton are recruiting on behalf of a client who is looking for a Project Manager to manage the Urban Energy projects in the Midlands, the North of England, and Scotland. The key deliverable for this role is the effective management of the construction projects (CHP, gas boilers, heat pumps, Decarbonisation of BU in the midlands & north, new network connections, chilled water, district heating and cooling pipework). Responsibilities To manage the delivery of Mechanical, Electrical and Civil project activities, and coordinate with the Engineers, Designers, Planners & QS/Legal teams. Produce bill of quantity/materials take off. Ensuring all deliverables are to the required standard and specification. Manage the project to ensure all contractual aspects between clients and contractors, ensuring the compliance of all parties, particularly with respect to completion of the project prior to programmed operational start date. To adhere to project delivery systems and procedures. To manage the timely production of O&M manuals with the Principal designer. Develop and maintain effective working relationships with project sponsors and other key stakeholders. Produce weekly/monthly project progress reports. Where applicable, carry out the Principal Contractor role. To work with the planner in order to track, monitor and report project status to senior management. Effective planning, allocation and management of resources. Comply at all times with policies and procedures. Manage and own the project budgets and produce monthly financial reports with the project QS. Coordinate with the Commissioning Manager. Responsible for the quality of delivery and final installation. Coordination with Operation Team. Attend Client and internal BU meetings. Carry out project reporting in line with required deadlines. Identify, monitor, mitigate and manage project and operational risks. Establish and maintain good supplier relations to ensure effective delivery and quality of Installations. Maintain a solution based approach to problems. To work with SHEQ team and CDM Manager to ensure compliance with all Health and Safety & CDM regulations and obligations. Requirements HNC/Degree level required in either a mechanical or electrical discipline. CSCS Project Manager Card SMSTS Qualified NRSWA card First Aid qualified. Experience of delivering multi-million pound M&E/Civil Projects with a diverse project delivery team Extensive Project Management Experience Mechanical/Electrical Engineering Civil Engineering Commercial /contract experience Client presentation /BD experience
Gas Engineer Rubix M&E is the leading Mechanical and Electrical recruitment agency in the UK. Our reputation is built on our commitment to excellence and delivering exceptional service to our clients and candidates. We are recruiting for competent Gas Engineers - we have multiple opportunities for Gas Engineers who are experienced either Servicing and Breakdowns or Boiler installation. Permanent package: between 40,000 and 80,000 with top company earners, earning in excess of this. Subcontracting earnings: between 1,000 to 2,000 per week. Required qualifications: - CCN1 Gas Qualification. Job titles that may also be applicable: Service & Repair Gas Engineer, Gas / Boiler Installer, Gas / Boiler Service Engineer. Rubix M&E are trusted partners of leading; Blue-chip organisations, Energy & Heating suppliers, Housing Associations, Contractors and Private customers. Efficiency, customer service and safety are the core focuses. Our clients are currently looking for a dedicated, skilled Gas Engineer to join their growing team. We are also recruiting for; Renewable Electricians, Smart Meter Installs, Dual Fuel Installers, Metering Installer, Smart Meter Experts, First Call Operatives, FCO's, I&C Technician, EV Installers, Smart Meter Auditors, Dual Fuel Auditors, Field Team Leaders (Smart Metering / Dual Fuel) to name a few. Apply now or call a member of our specialised M&E recruiters on (phone number removed). You can also register your CV on our website, (url removed) to stay up to date with our latest M&E vacancies. Rubix M&E - The UK's no.1 Mechanical and Electrical Recruitment Agency.
May 01, 2024
Full time
Gas Engineer Rubix M&E is the leading Mechanical and Electrical recruitment agency in the UK. Our reputation is built on our commitment to excellence and delivering exceptional service to our clients and candidates. We are recruiting for competent Gas Engineers - we have multiple opportunities for Gas Engineers who are experienced either Servicing and Breakdowns or Boiler installation. Permanent package: between 40,000 and 80,000 with top company earners, earning in excess of this. Subcontracting earnings: between 1,000 to 2,000 per week. Required qualifications: - CCN1 Gas Qualification. Job titles that may also be applicable: Service & Repair Gas Engineer, Gas / Boiler Installer, Gas / Boiler Service Engineer. Rubix M&E are trusted partners of leading; Blue-chip organisations, Energy & Heating suppliers, Housing Associations, Contractors and Private customers. Efficiency, customer service and safety are the core focuses. Our clients are currently looking for a dedicated, skilled Gas Engineer to join their growing team. We are also recruiting for; Renewable Electricians, Smart Meter Installs, Dual Fuel Installers, Metering Installer, Smart Meter Experts, First Call Operatives, FCO's, I&C Technician, EV Installers, Smart Meter Auditors, Dual Fuel Auditors, Field Team Leaders (Smart Metering / Dual Fuel) to name a few. Apply now or call a member of our specialised M&E recruiters on (phone number removed). You can also register your CV on our website, (url removed) to stay up to date with our latest M&E vacancies. Rubix M&E - The UK's no.1 Mechanical and Electrical Recruitment Agency.
We are currently recruiting for subcontract gas engineers to install gas boilers for a market leading heating company. We are looking for Installers all across Worthing with and agreed radius from home to work in. All works are completed within the private domestic sector, working between 3-5 days a week. Work will be delivered to the engineer via an online portal and based on the successful engin click apply for full job details
May 01, 2024
Contractor
We are currently recruiting for subcontract gas engineers to install gas boilers for a market leading heating company. We are looking for Installers all across Worthing with and agreed radius from home to work in. All works are completed within the private domestic sector, working between 3-5 days a week. Work will be delivered to the engineer via an online portal and based on the successful engin click apply for full job details
Are you a skilled Gas Engineer with a passion for smart thermostat installations? If so, we have an exciting opportunity just for you! We are currently recruiting dedicated individuals to join our team on a flexible work basis as Hive Installation Engineers. Benefits: Flexible Schedule: Enjoy the freedom to choose your working hours and manage your own schedule click apply for full job details
May 01, 2024
Full time
Are you a skilled Gas Engineer with a passion for smart thermostat installations? If so, we have an exciting opportunity just for you! We are currently recruiting dedicated individuals to join our team on a flexible work basis as Hive Installation Engineers. Benefits: Flexible Schedule: Enjoy the freedom to choose your working hours and manage your own schedule click apply for full job details
Our client a Social housing provider are seeking several domestic Gas Engineers across the West Midlands to join their established team on a full time basis. The role is to deliver a high-quality gas servicing and responsive gas repairs in accordance with the current Gas Safety Regulations. Responsibilities will include servicing and repair works on all gas installations within domestic properties including fires, heating, hot water systems and cookers as well some associated plumbing, Ability to work on your own and also as part of the team to ensure targets are met. It is essential / desirable you have the following criteria: Experience in gas servicing and repairs on modern gas condensing boilers, You will ideally hold: ACS accreditation in CCN1, CEN1, WAT1 (CENWAT), CPA1, CKR1, HTR1, UVHW Experience of oil boiler service and repairs both domestic and commercial and/or commercial gas boiler service and repair would be beneficial. Ideally previous work experience on domestic properties within the social housing environment If you would like more information or to apply for this vacancy, please send us your CV in word format to the email address assigned to this advert.
May 01, 2024
Full time
Our client a Social housing provider are seeking several domestic Gas Engineers across the West Midlands to join their established team on a full time basis. The role is to deliver a high-quality gas servicing and responsive gas repairs in accordance with the current Gas Safety Regulations. Responsibilities will include servicing and repair works on all gas installations within domestic properties including fires, heating, hot water systems and cookers as well some associated plumbing, Ability to work on your own and also as part of the team to ensure targets are met. It is essential / desirable you have the following criteria: Experience in gas servicing and repairs on modern gas condensing boilers, You will ideally hold: ACS accreditation in CCN1, CEN1, WAT1 (CENWAT), CPA1, CKR1, HTR1, UVHW Experience of oil boiler service and repairs both domestic and commercial and/or commercial gas boiler service and repair would be beneficial. Ideally previous work experience on domestic properties within the social housing environment If you would like more information or to apply for this vacancy, please send us your CV in word format to the email address assigned to this advert.
Seeking a Project Manager to manage Energy projects in the Midlands and North Region (Birmingham, Coventry, Newcastle and Scotland) The key deliverable for the Project Manager role is the effective management of the construction projects (CHP, gas boilers, heat pumps, Decarbonisation of our BU in the midlands and north region, new network connections, chilled water, district heating and cooling pipework). On offer is 55,000 - 65,000 + car or car allowance + benefits. Responsibilities / Duties of the Project Manager include: To manage the delivery of Mechanical, Electrical and Civil project activities, and coordinate with the Engineers, Designers, Planners & QS/Legal teams. Produce bill of quantity/materials take off. Ensuring all deliverables are to the required standard and specification. Manage the project to ensure all contractual aspects between us, clients and contractors, ensuring the compliance of all parties, particularly with respect to completion of the project prior to programmed operational start date To adhere to project delivery systems and procedures. To manage the timely production of O&M manuals with the lead designer. Develop and maintain effective working relationships with project sponsors and other key stakeholders. Produce weekly/monthly project progress reports. Where applicable, carry out the Principal Contractor role. To work with the planner in order to track, monitor and report project status to senior management. Effective planning, allocation and management of resources. Comply at all times with company policies and procedures. Manage and own the project budgets and produce monthly financial reports with the project QS. Coordinate with the Commissioning Manager. Responsible for the quality of delivery and final installation. Coordination with Operation Team. Attend Client and internal BU meetings To work with our SHEQ team and CDM Manager to ensure compliance with all Health and Safety & CDM regulations and obligations. Qualifications/ Required and Desired experience of the Project Manager: HNC/Degree level required - mechanical field CSCS Project Manager Card SMSTS Qualified First Aid qualified Experience of delivering multi-million pound M&E/Civil Projects with a diverse project delivery team 10 years experience in similar role Management of contractors in multiple disciplines Civil Engineering / utilities installation Commercial / planning understanding This really is a fantastic opportunity for a Project Manager to progress their career. If you are interested, please apply as soon as possible as this position will be filled quickly so don't miss out! Please note that the Project Manager position requires candidates to have full Right to Work in the UK Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
May 01, 2024
Full time
Seeking a Project Manager to manage Energy projects in the Midlands and North Region (Birmingham, Coventry, Newcastle and Scotland) The key deliverable for the Project Manager role is the effective management of the construction projects (CHP, gas boilers, heat pumps, Decarbonisation of our BU in the midlands and north region, new network connections, chilled water, district heating and cooling pipework). On offer is 55,000 - 65,000 + car or car allowance + benefits. Responsibilities / Duties of the Project Manager include: To manage the delivery of Mechanical, Electrical and Civil project activities, and coordinate with the Engineers, Designers, Planners & QS/Legal teams. Produce bill of quantity/materials take off. Ensuring all deliverables are to the required standard and specification. Manage the project to ensure all contractual aspects between us, clients and contractors, ensuring the compliance of all parties, particularly with respect to completion of the project prior to programmed operational start date To adhere to project delivery systems and procedures. To manage the timely production of O&M manuals with the lead designer. Develop and maintain effective working relationships with project sponsors and other key stakeholders. Produce weekly/monthly project progress reports. Where applicable, carry out the Principal Contractor role. To work with the planner in order to track, monitor and report project status to senior management. Effective planning, allocation and management of resources. Comply at all times with company policies and procedures. Manage and own the project budgets and produce monthly financial reports with the project QS. Coordinate with the Commissioning Manager. Responsible for the quality of delivery and final installation. Coordination with Operation Team. Attend Client and internal BU meetings To work with our SHEQ team and CDM Manager to ensure compliance with all Health and Safety & CDM regulations and obligations. Qualifications/ Required and Desired experience of the Project Manager: HNC/Degree level required - mechanical field CSCS Project Manager Card SMSTS Qualified First Aid qualified Experience of delivering multi-million pound M&E/Civil Projects with a diverse project delivery team 10 years experience in similar role Management of contractors in multiple disciplines Civil Engineering / utilities installation Commercial / planning understanding This really is a fantastic opportunity for a Project Manager to progress their career. If you are interested, please apply as soon as possible as this position will be filled quickly so don't miss out! Please note that the Project Manager position requires candidates to have full Right to Work in the UK Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Our client, a Social housing provider are seeking several domestic Gas Engineers across Oxfordshire to join their established team on a full time basis. The role is to deliver a high-quality gas servicing and responsive gas repairs in accordance with the current Gas Safety Regulations. Responsibilities will include servicing and repair works on all gas installations within domestic properties including fires, heating, hot water systems and cookers as well some associated plumbing, Ability to work on your own and also as part of the team to ensure targets are met. It is essential / desirable you have the following criteria: Experience in gas servicing and repairs on modern gas condensing boilers, You will ideally hold: ACS accreditation in CCN1, CEN1, WAT1 (CENWAT), CPA1, CKR1, HTR1, UVHW Experience of oil boiler service and repairs both domestic and commercial and/or commercial gas boiler service and repair would be beneficial. Ideally previous work experience on domestic properties within the social housing environment If you would like more information or to apply for this vacancy, please send us your CV in word format to the email address assigned to this advert.
May 01, 2024
Full time
Our client, a Social housing provider are seeking several domestic Gas Engineers across Oxfordshire to join their established team on a full time basis. The role is to deliver a high-quality gas servicing and responsive gas repairs in accordance with the current Gas Safety Regulations. Responsibilities will include servicing and repair works on all gas installations within domestic properties including fires, heating, hot water systems and cookers as well some associated plumbing, Ability to work on your own and also as part of the team to ensure targets are met. It is essential / desirable you have the following criteria: Experience in gas servicing and repairs on modern gas condensing boilers, You will ideally hold: ACS accreditation in CCN1, CEN1, WAT1 (CENWAT), CPA1, CKR1, HTR1, UVHW Experience of oil boiler service and repairs both domestic and commercial and/or commercial gas boiler service and repair would be beneficial. Ideally previous work experience on domestic properties within the social housing environment If you would like more information or to apply for this vacancy, please send us your CV in word format to the email address assigned to this advert.
Our client, a Social housing provider are seeking several domestic Gas Engineers across Wiltshire to join their established team on a full time basis. The role is to deliver a high-quality gas servicing and responsive gas repairs in accordance with the current Gas Safety Regulations. Responsibilities will include servicing and repair works on all gas installations within domestic properties including fires, heating, hot water systems and cookers as well some associated plumbing, Ability to work on your own and also as part of the team to ensure targets are met. It is essential / desirable you have the following criteria: Experience in gas servicing and repairs on modern gas condensing boilers, You will ideally hold: ACS accreditation in CCN1, CEN1, WAT1 (CENWAT), CPA1, CKR1, HTR1, UVHW Experience of oil boiler service and repairs both domestic and commercial and/or commercial gas boiler service and repair would be beneficial. Ideally previous work experience on domestic properties within the social housing environment If you would like more information or to apply for this vacancy, please send us your CV in word format to the email address assigned to this advert.
May 01, 2024
Full time
Our client, a Social housing provider are seeking several domestic Gas Engineers across Wiltshire to join their established team on a full time basis. The role is to deliver a high-quality gas servicing and responsive gas repairs in accordance with the current Gas Safety Regulations. Responsibilities will include servicing and repair works on all gas installations within domestic properties including fires, heating, hot water systems and cookers as well some associated plumbing, Ability to work on your own and also as part of the team to ensure targets are met. It is essential / desirable you have the following criteria: Experience in gas servicing and repairs on modern gas condensing boilers, You will ideally hold: ACS accreditation in CCN1, CEN1, WAT1 (CENWAT), CPA1, CKR1, HTR1, UVHW Experience of oil boiler service and repairs both domestic and commercial and/or commercial gas boiler service and repair would be beneficial. Ideally previous work experience on domestic properties within the social housing environment If you would like more information or to apply for this vacancy, please send us your CV in word format to the email address assigned to this advert.
About the role If you're experienced in fitting boilers, heating systems, or heat pumps we want to hear from you! You'll be responsible for ensuring that high quality heat pump installations are carried out safely and efficiently, leading your team to deliver outstanding customer service. What you'll be doing as a Heat Pump Engineer. Installing the very latest heat pumps, cylinders, and radiators Following supplied schematic designs to install efficient, reliable heating systems Delivering outstanding customer service Saving homeowners money, and helping them reduce their families CO2 emissions What we would like you to have as a Heat Pump Engineer We will provide all necessary Air Source Heat Pump training at our own Aira Academy's throughout the UK, however we need you to have the following: Any of the following would be good; NVQ level 2 plumbing (or equivalent) Gas qualifications, minimum DOM NG Core Experience installing boilers or air source heat pumps Experience installing hot water cylinders and radiators NVQ Level 3 plumbing (or equivalent) WRAS Qualifications (water regs) Unvented hot water systems (part G) Level 3 heat pump system design What we offer as a Heat Pump Engineer Base Salary of 40,000 to 50,000. Overtime, and a referral scheme Life insurance Level 3 heat pump training being provided to all technicians, as well as world class heat pump installation and product training at the Aira Academy 25 days Annual Leave plus Bank Holidays Branded company van All tools, uniform, and equipment provided Company phone
May 01, 2024
Full time
About the role If you're experienced in fitting boilers, heating systems, or heat pumps we want to hear from you! You'll be responsible for ensuring that high quality heat pump installations are carried out safely and efficiently, leading your team to deliver outstanding customer service. What you'll be doing as a Heat Pump Engineer. Installing the very latest heat pumps, cylinders, and radiators Following supplied schematic designs to install efficient, reliable heating systems Delivering outstanding customer service Saving homeowners money, and helping them reduce their families CO2 emissions What we would like you to have as a Heat Pump Engineer We will provide all necessary Air Source Heat Pump training at our own Aira Academy's throughout the UK, however we need you to have the following: Any of the following would be good; NVQ level 2 plumbing (or equivalent) Gas qualifications, minimum DOM NG Core Experience installing boilers or air source heat pumps Experience installing hot water cylinders and radiators NVQ Level 3 plumbing (or equivalent) WRAS Qualifications (water regs) Unvented hot water systems (part G) Level 3 heat pump system design What we offer as a Heat Pump Engineer Base Salary of 40,000 to 50,000. Overtime, and a referral scheme Life insurance Level 3 heat pump training being provided to all technicians, as well as world class heat pump installation and product training at the Aira Academy 25 days Annual Leave plus Bank Holidays Branded company van All tools, uniform, and equipment provided Company phone