About us: Daniel Owen is an established recruitment consultancy specialising in the placement of quality, temporary and permanent workers to all roles in the Built Environment. Working with some of the UK's largest and most respected construction, maintenance and engineering companies. The Company You will be working for a well established company who does work nationwide. However this role will be based in and around Reading. You will be completing work as an Air Conditioning Engineer for schools, care homes, cinemas, police stations- all aspects of commercial FM. This is a mobile role and the company you would be working for has room for growth within the company and career progression. The Role Salary 40k-45k per year with opportunity for bonuses and over time. Weekly pay. Can use the van for personal use . Van and fuel card supplied. Working 40 hours per week. With 23 days PLUS bank holiday. 1 in 7 for a call out. Air Conditioning Engineer Job Role & Responsibilities Responding to service calls on a UK wide basis Test, service and repair a wide variety of equipment Fault Finding Offering advice and technical support to customers Reporting directly to the Technical Service Manager Air Conditioning Engineer Required Skills & Experience NVQ Level's 2 & 3 or equivalent F Gas Cat 1 Electrical experience preferable Must have installation skills Working with a range of systems split type units to VRV/VRF to water chillers Good communication skills Motivated to work on industry leading equipment TAGS:/COMMERICALAIRCONDITIONINGENGINEER/AIRCONENGINEER/AIRCON/ENGINEER/READING/RG2/
May 17, 2024
Full time
About us: Daniel Owen is an established recruitment consultancy specialising in the placement of quality, temporary and permanent workers to all roles in the Built Environment. Working with some of the UK's largest and most respected construction, maintenance and engineering companies. The Company You will be working for a well established company who does work nationwide. However this role will be based in and around Reading. You will be completing work as an Air Conditioning Engineer for schools, care homes, cinemas, police stations- all aspects of commercial FM. This is a mobile role and the company you would be working for has room for growth within the company and career progression. The Role Salary 40k-45k per year with opportunity for bonuses and over time. Weekly pay. Can use the van for personal use . Van and fuel card supplied. Working 40 hours per week. With 23 days PLUS bank holiday. 1 in 7 for a call out. Air Conditioning Engineer Job Role & Responsibilities Responding to service calls on a UK wide basis Test, service and repair a wide variety of equipment Fault Finding Offering advice and technical support to customers Reporting directly to the Technical Service Manager Air Conditioning Engineer Required Skills & Experience NVQ Level's 2 & 3 or equivalent F Gas Cat 1 Electrical experience preferable Must have installation skills Working with a range of systems split type units to VRV/VRF to water chillers Good communication skills Motivated to work on industry leading equipment TAGS:/COMMERICALAIRCONDITIONINGENGINEER/AIRCONENGINEER/AIRCON/ENGINEER/READING/RG2/
White Goods Appliance Engineer Stanford-le-Hope Tilbury Customer Service Centre (LM0038) Permanent Full Time Grade 3 Salary £32,000 - £35,000 per annum Our passion at Currys is helping everyone enjoy the latest tech. We're proud of the service levels we provide for our customers - online, in-store or in their homes. And it's all down to our people, 30,000+ capable and committed colleagues, learning together, growing together, making us amazing and celebrating the wins. Join us as a White Goods Engineer and you'll work your magic to keep customers' appliances in tip-top condition. Whether you're installing, diagnosing faults or making a vital repair, you'll be on hand with the right skills, right knowledge and plenty of smiles to make sure every experience is a positive one. As part of this role, you'll be responsible for: Driving your company van and managing your own day effectively Testing, diagnosing and fixing white goods in our customers' homes Providing and implementing technical knowledge across a range of white goods appliances Building up our reputation as a home services expert A lot of the job comes down to skill and efficiency, but building a rapport with customers is just as important. They will welcome you into their homes, and you'll leave them happy. You will need: Proven experience in White Goods repairs Full UK/EU driving licence with no more than 6 penalty points Ideally (but not essential) ACS Qualifications (or equivalent) in Essential Gas Safety Domestic (CCN1), Gas Cookers and Ranges (CKR1) To love that feeling when you've delivered for a customer We know our people are the magic ingredient in our success. That's why we reward you with benefits that go deeper than just the day-to-day. Benefits that work for you, your lifestyle and your career. They include: Competitive pension scheme Quarterly bonus Product discounts on the latest tech A range of wellbeing initiatives 30 days of annual leave (inclusive of bank holiday entitlement) Beyond that, we'll be with you every step of the way, enabling you to get the most out of your role, grow your skills, your way, and see your career develop in the way you want. Plus, we'll help you develop skills for life, so you can take charge of your future and ours. Be part of our talented White Goods Engineering team and unbox your passion at the UK's best-known retailer in tech.
May 17, 2024
Full time
White Goods Appliance Engineer Stanford-le-Hope Tilbury Customer Service Centre (LM0038) Permanent Full Time Grade 3 Salary £32,000 - £35,000 per annum Our passion at Currys is helping everyone enjoy the latest tech. We're proud of the service levels we provide for our customers - online, in-store or in their homes. And it's all down to our people, 30,000+ capable and committed colleagues, learning together, growing together, making us amazing and celebrating the wins. Join us as a White Goods Engineer and you'll work your magic to keep customers' appliances in tip-top condition. Whether you're installing, diagnosing faults or making a vital repair, you'll be on hand with the right skills, right knowledge and plenty of smiles to make sure every experience is a positive one. As part of this role, you'll be responsible for: Driving your company van and managing your own day effectively Testing, diagnosing and fixing white goods in our customers' homes Providing and implementing technical knowledge across a range of white goods appliances Building up our reputation as a home services expert A lot of the job comes down to skill and efficiency, but building a rapport with customers is just as important. They will welcome you into their homes, and you'll leave them happy. You will need: Proven experience in White Goods repairs Full UK/EU driving licence with no more than 6 penalty points Ideally (but not essential) ACS Qualifications (or equivalent) in Essential Gas Safety Domestic (CCN1), Gas Cookers and Ranges (CKR1) To love that feeling when you've delivered for a customer We know our people are the magic ingredient in our success. That's why we reward you with benefits that go deeper than just the day-to-day. Benefits that work for you, your lifestyle and your career. They include: Competitive pension scheme Quarterly bonus Product discounts on the latest tech A range of wellbeing initiatives 30 days of annual leave (inclusive of bank holiday entitlement) Beyond that, we'll be with you every step of the way, enabling you to get the most out of your role, grow your skills, your way, and see your career develop in the way you want. Plus, we'll help you develop skills for life, so you can take charge of your future and ours. Be part of our talented White Goods Engineering team and unbox your passion at the UK's best-known retailer in tech.
White Goods Appliance Engineer Stanford-le-Hope Tilbury Customer Service Centre (LM0038) Permanent Full Time Grade 3 Salary £35,000 - £39,0000 Our passion at Currys is helping everyone enjoy the latest tech. We're proud of the service levels we provide for our customers - online, in-store or in their homes. And it's all down to our people, 30,000+ capable and committed colleagues, learning together, growing together, making us amazing and celebrating the wins. Join us as a White Goods Engineer and you'll work your magic to keep customers' appliances in tip-top condition. Whether you're installing, diagnosing faults or making a vital repair, you'll be on hand with the right skills, right knowledge and plenty of smiles to make sure every experience is a positive one. As part of this role, you'll be responsible for: Driving your company van and managing your own day effectively Testing, diagnosing and fixing white goods and Gas appliances in our customers' homes Providing and implementing technical knowledge across a range of white goods appliances Building up our reputation as a home services expert A lot of the job comes down to skill and efficiency, but building a rapport with customers is just as important. They will welcome you into their homes, and you'll leave them happy. You will need: Proven experience in White Goods repairs CKR1 qualification CCN1 qualification Full UK/EU driving licence with no more than 6 penalty points Ideally (but not essential) ACS Qualifications (or equivalent) in Essential Gas Safety Domestic (CCN1), Gas Cookers and Ranges (CKR1) To love that feeling when you've delivered for a customer We know our people are the magic ingredient in our success. That's why we reward you with benefits that go deeper than just the day-to-day. Benefits that work for you, your lifestyle and your career. They include: Competitive pension scheme Quarterly bonus Product discounts on the latest tech A range of wellbeing initiatives 30 days of annual leave (inclusive of bank holiday entitlement) Beyond that, we'll be with you every step of the way, enabling you to get the most out of your role, grow your skills, your way, and see your career develop in the way you want. Plus, we'll help you develop skills for life, so you can take charge of your future and ours. Be part of our talented White Goods Engineering team and unbox your passion at the UK's best-known retailer in tech.
May 17, 2024
Full time
White Goods Appliance Engineer Stanford-le-Hope Tilbury Customer Service Centre (LM0038) Permanent Full Time Grade 3 Salary £35,000 - £39,0000 Our passion at Currys is helping everyone enjoy the latest tech. We're proud of the service levels we provide for our customers - online, in-store or in their homes. And it's all down to our people, 30,000+ capable and committed colleagues, learning together, growing together, making us amazing and celebrating the wins. Join us as a White Goods Engineer and you'll work your magic to keep customers' appliances in tip-top condition. Whether you're installing, diagnosing faults or making a vital repair, you'll be on hand with the right skills, right knowledge and plenty of smiles to make sure every experience is a positive one. As part of this role, you'll be responsible for: Driving your company van and managing your own day effectively Testing, diagnosing and fixing white goods and Gas appliances in our customers' homes Providing and implementing technical knowledge across a range of white goods appliances Building up our reputation as a home services expert A lot of the job comes down to skill and efficiency, but building a rapport with customers is just as important. They will welcome you into their homes, and you'll leave them happy. You will need: Proven experience in White Goods repairs CKR1 qualification CCN1 qualification Full UK/EU driving licence with no more than 6 penalty points Ideally (but not essential) ACS Qualifications (or equivalent) in Essential Gas Safety Domestic (CCN1), Gas Cookers and Ranges (CKR1) To love that feeling when you've delivered for a customer We know our people are the magic ingredient in our success. That's why we reward you with benefits that go deeper than just the day-to-day. Benefits that work for you, your lifestyle and your career. They include: Competitive pension scheme Quarterly bonus Product discounts on the latest tech A range of wellbeing initiatives 30 days of annual leave (inclusive of bank holiday entitlement) Beyond that, we'll be with you every step of the way, enabling you to get the most out of your role, grow your skills, your way, and see your career develop in the way you want. Plus, we'll help you develop skills for life, so you can take charge of your future and ours. Be part of our talented White Goods Engineering team and unbox your passion at the UK's best-known retailer in tech.
About us: Daniel Owen is an established recruitment consultancy specialising in the placement of quality, temporary and permanent workers to all roles in the Built Environment. Working with some of the UK's largest and most respected construction, maintenance and engineering companies. The Company You will be working for a well established company who does work nationwide. However this role will be based in and around Reading. You will be completing gas maintenance for schools, care homes, cinemas, police stations- all aspects of commercial FM. This is a mobile role and the company you would be working for has room for growth within the company and career progression. The Role Salary 40k-45k per year with opportunity for bonuses and over time. Weekly pay. Can use the van for personal use . Van and fuel card supplied. Working 40 hours per week. With 23 days PLUS bank holiday. 1 in 7 for a call out. NVQ level 2 & 3 in service & maintenance (preferable) Commercial N Gas safety - required Commercial Pipework - required Commercial plant - required Electrical experience preferable Must have installation skills Willingness to travel throughout the UK as required Good communication skills Motivated to work on industry leading equipment Responding to service calls Test, service and repair a wide variety of equipment throughout the UK Fault Finding Offering advice and technical support to customers Reporting directly to the Service Manager TAGS:/COMMERICALGASENGINEER/GASENGINEER/COMMERICAL/NVQLEVEL2/NVQLEVEL3/COMMERCIALPLANT/
May 17, 2024
Full time
About us: Daniel Owen is an established recruitment consultancy specialising in the placement of quality, temporary and permanent workers to all roles in the Built Environment. Working with some of the UK's largest and most respected construction, maintenance and engineering companies. The Company You will be working for a well established company who does work nationwide. However this role will be based in and around Reading. You will be completing gas maintenance for schools, care homes, cinemas, police stations- all aspects of commercial FM. This is a mobile role and the company you would be working for has room for growth within the company and career progression. The Role Salary 40k-45k per year with opportunity for bonuses and over time. Weekly pay. Can use the van for personal use . Van and fuel card supplied. Working 40 hours per week. With 23 days PLUS bank holiday. 1 in 7 for a call out. NVQ level 2 & 3 in service & maintenance (preferable) Commercial N Gas safety - required Commercial Pipework - required Commercial plant - required Electrical experience preferable Must have installation skills Willingness to travel throughout the UK as required Good communication skills Motivated to work on industry leading equipment Responding to service calls Test, service and repair a wide variety of equipment throughout the UK Fault Finding Offering advice and technical support to customers Reporting directly to the Service Manager TAGS:/COMMERICALGASENGINEER/GASENGINEER/COMMERICAL/NVQLEVEL2/NVQLEVEL3/COMMERCIALPLANT/
Are you an experienced Combustion Service Engineer, seeking a new role in London? My client has an immediate opportunity for a Combustion Engineer to join their successful team on a permanent basis. Benefits: Competitive Salary Company Van Call out and standby included + Overtime available Years of service program Duties: Provide first line reactive response to critical Heating and Hot water plant, including gas pipework. Be competent to enable and reset critical plant following power outage and interruption of services and leave in safe and good working order. Ensure company issued tools are PAT tested, certificated and logged with the office. Ensure specialist meters are certificated and up to date with legislation and compliance / technical & industry requirements. Be skilled in estimating time and materials and construction of quotations in support of the Client Supervisor by providing details of parts and works required. Assist with local financial control on all re-active and essential repairs through good working practices and working with the Client Supervisor in this area. Monitor and book of spares and materials on a job-to-job works order to guarantee financial control and timelines quoted are adhered to. Overview and upkeep of site logbooks and Gas Safe records in support of the Client Supervisor Ensure reactive calls and service delivery is arranged for the client in support of service desk. Make safe isolations to adhere to legislation. Carry out gas testing and purging in accordance with IGE regulations and British Standards as applicable. Repair or replace, pipework, valves, strainers, actuators, humidifiers, fan decks, integral controls or equivalent etc. Read and Understand risk assessments and method statements before the works are due to be started and understand the full scope of the SSOW. Monitor and record plant information and escalate issues found. Look to improve and enhance existing engineering and technical scope, improve plant and service performance and energy efficiencies through innovation recommendation and a pro-active approach. Qualifications : Current ACS Certification City & Guilds or equivalent in Plumbing and Heating Qualified Gas engineer competent to work with electrical services. Strong fault-finding skills on all forms of gas appliances and systems Experience in a similar role is essential. Requirements Excellent working knowledge of Gas Appliances and combustion. Also, any related associated plant, such as Fans, controls, pumps, pipework. Have knowledge of operation, maintenance, and repair of HVAC/Gas equipment. Have knowledge of budgetary practices and principles to assist the Client Supervisor in controlling jobs expenditures. Be skilled in applying Engineering techniques to the required British Standard or IGE equivalent in all areas. To apply, please forward a copy of your CV. Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.
May 17, 2024
Full time
Are you an experienced Combustion Service Engineer, seeking a new role in London? My client has an immediate opportunity for a Combustion Engineer to join their successful team on a permanent basis. Benefits: Competitive Salary Company Van Call out and standby included + Overtime available Years of service program Duties: Provide first line reactive response to critical Heating and Hot water plant, including gas pipework. Be competent to enable and reset critical plant following power outage and interruption of services and leave in safe and good working order. Ensure company issued tools are PAT tested, certificated and logged with the office. Ensure specialist meters are certificated and up to date with legislation and compliance / technical & industry requirements. Be skilled in estimating time and materials and construction of quotations in support of the Client Supervisor by providing details of parts and works required. Assist with local financial control on all re-active and essential repairs through good working practices and working with the Client Supervisor in this area. Monitor and book of spares and materials on a job-to-job works order to guarantee financial control and timelines quoted are adhered to. Overview and upkeep of site logbooks and Gas Safe records in support of the Client Supervisor Ensure reactive calls and service delivery is arranged for the client in support of service desk. Make safe isolations to adhere to legislation. Carry out gas testing and purging in accordance with IGE regulations and British Standards as applicable. Repair or replace, pipework, valves, strainers, actuators, humidifiers, fan decks, integral controls or equivalent etc. Read and Understand risk assessments and method statements before the works are due to be started and understand the full scope of the SSOW. Monitor and record plant information and escalate issues found. Look to improve and enhance existing engineering and technical scope, improve plant and service performance and energy efficiencies through innovation recommendation and a pro-active approach. Qualifications : Current ACS Certification City & Guilds or equivalent in Plumbing and Heating Qualified Gas engineer competent to work with electrical services. Strong fault-finding skills on all forms of gas appliances and systems Experience in a similar role is essential. Requirements Excellent working knowledge of Gas Appliances and combustion. Also, any related associated plant, such as Fans, controls, pumps, pipework. Have knowledge of operation, maintenance, and repair of HVAC/Gas equipment. Have knowledge of budgetary practices and principles to assist the Client Supervisor in controlling jobs expenditures. Be skilled in applying Engineering techniques to the required British Standard or IGE equivalent in all areas. To apply, please forward a copy of your CV. Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.
Role: Heating Engineer Salary: 37,000 + company van Location: Midlands Mainstay is currently working with a well-established company who are looking for a Heating Engineer in performing planned and reactive maintenance across numerous sites around the Midlands. Our client is a business that offers continuous support and invests a huge amount in their staff and retention. They have grown due to their diverse approach and exhibit strong company values. Role: As an Heating Engineer you will perform Planned Preventive Maintenance as well as Reactive Maintenance As an Heating Engineer you will perform mechanical maintenance across many aspects on site including combi boilers, pipework, taps, toilets, heating systems, plant rooms You will also perform small installations across the site Part of your role will involve assisting in project planning, estimation, and stock control of critical Electrical /mechanical / building fabric spares As a Heating Engineer you will ensure all work completed is compliant and in line with health and safety regulations You will also ensure that you offer great customer service Duties: As an Heating Engineer you must hold relevant qualifications within Mechanical engineer installations e.g. City & guilds level 3 in Plumbing and Heating Holding a qualification in domestic gas would be an advantage You must have experience in a similar role performing maintenance across a large estate Good written and verbal communication is a must Must hold a full UK driving license
May 17, 2024
Full time
Role: Heating Engineer Salary: 37,000 + company van Location: Midlands Mainstay is currently working with a well-established company who are looking for a Heating Engineer in performing planned and reactive maintenance across numerous sites around the Midlands. Our client is a business that offers continuous support and invests a huge amount in their staff and retention. They have grown due to their diverse approach and exhibit strong company values. Role: As an Heating Engineer you will perform Planned Preventive Maintenance as well as Reactive Maintenance As an Heating Engineer you will perform mechanical maintenance across many aspects on site including combi boilers, pipework, taps, toilets, heating systems, plant rooms You will also perform small installations across the site Part of your role will involve assisting in project planning, estimation, and stock control of critical Electrical /mechanical / building fabric spares As a Heating Engineer you will ensure all work completed is compliant and in line with health and safety regulations You will also ensure that you offer great customer service Duties: As an Heating Engineer you must hold relevant qualifications within Mechanical engineer installations e.g. City & guilds level 3 in Plumbing and Heating Holding a qualification in domestic gas would be an advantage You must have experience in a similar role performing maintenance across a large estate Good written and verbal communication is a must Must hold a full UK driving license
Exciting Opportunity to join our Growing Team: Inspection and Install Gas Engineer We are a multi-trade maintenance family run company carrying out reactive and planned maintenance inside and outside the M25 area. Key Skills: Must be Gas Safe Registered & hold Level 2/3 Diploma in Plumbing and Heating Able to issue Gas Safe Certificates for Domestic Properties using Software provided Able to complete servicing, Landlords Gas Safety Inspections and breakdowns and boiler installation if required. Must be registered to work on gas boilers, hobs, cookers and fires Minimum of 5 years experience Plumbing Previous experience on HIU Units and Under Floor Heating preferred Good Time Management Organisation Skills and Job Planning Able to work under own initiative and as part of a team People skills Health and Safety awareness Ability to be able to use provided reporting software for accurate job details and information. (Full training will be given) Benefits Competitive basic salary with extra income available through overtime and out of hours payments. Pension scheme 21 days holiday + Bank Holidays Company vehicle & fuel card Uniform PPE Salary Range £49,000 - £60,000 (Dependant Upon Experience) Overtime available Monday -Friday Please note: We are an equal opportunities employer and abide by the Equalities Act 2010. All applicants are treated equally and fairly throughout the recruitment and selection process. We will take every possible step to ensure that no person working at, seeking employment with us or any member of our team of associates will receive less favourable treatment or will be disadvantaged by requirements or conditions that cannot be shown to be justifiable on the grounds of their: Age, Disability, Gender Reassignment, Marriage and Civil Partnership, Pregnancy and Maternity, Race, Religion or belief, Sex, Sexual Orientation Job Type: Full-time Pay: £49,000.00-£60,000.00 per year Benefits: Company car Free parking Schedule: Monday to Friday Experience: Domestic Gas Engineer: 5 years (required) Licence/Certification: Driving Licence (required) Work Location: On the road Expected start date: 31/05/2024
May 17, 2024
Full time
Exciting Opportunity to join our Growing Team: Inspection and Install Gas Engineer We are a multi-trade maintenance family run company carrying out reactive and planned maintenance inside and outside the M25 area. Key Skills: Must be Gas Safe Registered & hold Level 2/3 Diploma in Plumbing and Heating Able to issue Gas Safe Certificates for Domestic Properties using Software provided Able to complete servicing, Landlords Gas Safety Inspections and breakdowns and boiler installation if required. Must be registered to work on gas boilers, hobs, cookers and fires Minimum of 5 years experience Plumbing Previous experience on HIU Units and Under Floor Heating preferred Good Time Management Organisation Skills and Job Planning Able to work under own initiative and as part of a team People skills Health and Safety awareness Ability to be able to use provided reporting software for accurate job details and information. (Full training will be given) Benefits Competitive basic salary with extra income available through overtime and out of hours payments. Pension scheme 21 days holiday + Bank Holidays Company vehicle & fuel card Uniform PPE Salary Range £49,000 - £60,000 (Dependant Upon Experience) Overtime available Monday -Friday Please note: We are an equal opportunities employer and abide by the Equalities Act 2010. All applicants are treated equally and fairly throughout the recruitment and selection process. We will take every possible step to ensure that no person working at, seeking employment with us or any member of our team of associates will receive less favourable treatment or will be disadvantaged by requirements or conditions that cannot be shown to be justifiable on the grounds of their: Age, Disability, Gender Reassignment, Marriage and Civil Partnership, Pregnancy and Maternity, Race, Religion or belief, Sex, Sexual Orientation Job Type: Full-time Pay: £49,000.00-£60,000.00 per year Benefits: Company car Free parking Schedule: Monday to Friday Experience: Domestic Gas Engineer: 5 years (required) Licence/Certification: Driving Licence (required) Work Location: On the road Expected start date: 31/05/2024
Are you a Commercial Gas Engineer looking for your next opportunity? Would you like to work in a renowned company which offers up skill and training? Randstad Construction & Property are working on behalf of a National Facilities Management company to find an experienced and collaborative Commercial Gas Engineer to join their team in Glasgow. The successful candidate will be responsible for carrying out PPMs and reactive maintenance across various sites. Location: Glasgow (mobile) Salary: Competitive (up to 46,000 depending on experience) Employment type: Full-time, permanent, Monday-Friday Key benefits: Annual holidays Employer pension (including bank holidays) Company sick pay Cycle to work scheme Overtime rates Flexible working considered An average day will include the following: Carrying out installation, repairs and PPMs Identifying any defects and providing parts lists and estimated timescales for repairing them Participating in the call out rota Complying to Health and Safety regulations and ensuring industry best practices Supporting the field service team and maintaining internal operational processes Providing high levels of customer service and maintaining good working relationships with colleagues and customers An ideal candidate will have: A full UK driving licence Commercial tickets, including CODNCO1, ICPN1, TPCP1A, CIGA1, CORT1 Experience working within commercial environments Catering tickets, IPAF, PASMA & OFTEC desired but not essential An ideal candidate will be: Flexible and patient A team player Able to understand complex information and demonstrate attention to detail Remain professional and communicate strongly A can-do attitude If this sounds like you please get in touch by contacting Hannah Mitchell at Randstad C&P Newcastle Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
May 17, 2024
Full time
Are you a Commercial Gas Engineer looking for your next opportunity? Would you like to work in a renowned company which offers up skill and training? Randstad Construction & Property are working on behalf of a National Facilities Management company to find an experienced and collaborative Commercial Gas Engineer to join their team in Glasgow. The successful candidate will be responsible for carrying out PPMs and reactive maintenance across various sites. Location: Glasgow (mobile) Salary: Competitive (up to 46,000 depending on experience) Employment type: Full-time, permanent, Monday-Friday Key benefits: Annual holidays Employer pension (including bank holidays) Company sick pay Cycle to work scheme Overtime rates Flexible working considered An average day will include the following: Carrying out installation, repairs and PPMs Identifying any defects and providing parts lists and estimated timescales for repairing them Participating in the call out rota Complying to Health and Safety regulations and ensuring industry best practices Supporting the field service team and maintaining internal operational processes Providing high levels of customer service and maintaining good working relationships with colleagues and customers An ideal candidate will have: A full UK driving licence Commercial tickets, including CODNCO1, ICPN1, TPCP1A, CIGA1, CORT1 Experience working within commercial environments Catering tickets, IPAF, PASMA & OFTEC desired but not essential An ideal candidate will be: Flexible and patient A team player Able to understand complex information and demonstrate attention to detail Remain professional and communicate strongly A can-do attitude If this sounds like you please get in touch by contacting Hannah Mitchell at Randstad C&P Newcastle Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Gas Appliance Engineer Aylesbury Aylesbury Customer Service Centre (LM0018) Permanent Full Time Grade 3 Salary: £36,000 plus bonus and overtime (OTE £40,000 per annum) Shift Pattern: 5 on 3 off Our passion at Currys is helping everyone enjoy the latest tech. We're proud of the service levels we provide for our customers - online, in-store or in their homes. And it's all down to our people, 30,000+ capable and committed colleagues, learning together, growing together, making us amazing and celebrating the wins. As a Gas Appliance Engineer, you'll be out on the road paired up with one of our Drivers. You'll meet, and help out, lots of different customers every day, while enjoying the variety of a wide range of installation jobs. We'll provide the training so you can set up an array of products, from the latest cookers to integrated white goods. And because customers are often excited to get their new products up and running, you earn plenty of thanks for a job well done. As part of this role, you'll be responsible for: Confidently fitting new products, both gas and electric, safely Sharing your product knowledge with our customers Building great relationships at all home visits Customers invite you into their homes to install a new product, and you'll jump at the opportunity to make the experience memorable. You will need: ACS Qualifications (or equivalent) in Essential Gas Safety Domestic (CCN1), Gas Cookers and Ranges (CKR1) Proven experience in installing gas cookers and ranges To take pride in what you do and provide excellent service Ability lifting heavy items such as cookers We know our people are the magic ingredient in our success. That's why we reward you with benefits that go deeper than just the day-to-day. Benefits that work for you, your lifestyle and your career. They include: Quarterly bonus Competitive pension scheme Product discounts on the latest tech A range of wellbeing initiatives 30 days' annual leave (inclusive of bank holiday entitlement) A shift pattern of five over eight days Beyond that, we'll be with you every step of the way, enabling you to get the most out of your role, grow your skills, your way, and see your career develop in the way you want. Plus, we'll help you develop skills for life, so you can take charge of your future and ours. Be part of our talented Gas Engineer team and unbox your passion at the UK's best-known retailer in tech.
May 17, 2024
Full time
Gas Appliance Engineer Aylesbury Aylesbury Customer Service Centre (LM0018) Permanent Full Time Grade 3 Salary: £36,000 plus bonus and overtime (OTE £40,000 per annum) Shift Pattern: 5 on 3 off Our passion at Currys is helping everyone enjoy the latest tech. We're proud of the service levels we provide for our customers - online, in-store or in their homes. And it's all down to our people, 30,000+ capable and committed colleagues, learning together, growing together, making us amazing and celebrating the wins. As a Gas Appliance Engineer, you'll be out on the road paired up with one of our Drivers. You'll meet, and help out, lots of different customers every day, while enjoying the variety of a wide range of installation jobs. We'll provide the training so you can set up an array of products, from the latest cookers to integrated white goods. And because customers are often excited to get their new products up and running, you earn plenty of thanks for a job well done. As part of this role, you'll be responsible for: Confidently fitting new products, both gas and electric, safely Sharing your product knowledge with our customers Building great relationships at all home visits Customers invite you into their homes to install a new product, and you'll jump at the opportunity to make the experience memorable. You will need: ACS Qualifications (or equivalent) in Essential Gas Safety Domestic (CCN1), Gas Cookers and Ranges (CKR1) Proven experience in installing gas cookers and ranges To take pride in what you do and provide excellent service Ability lifting heavy items such as cookers We know our people are the magic ingredient in our success. That's why we reward you with benefits that go deeper than just the day-to-day. Benefits that work for you, your lifestyle and your career. They include: Quarterly bonus Competitive pension scheme Product discounts on the latest tech A range of wellbeing initiatives 30 days' annual leave (inclusive of bank holiday entitlement) A shift pattern of five over eight days Beyond that, we'll be with you every step of the way, enabling you to get the most out of your role, grow your skills, your way, and see your career develop in the way you want. Plus, we'll help you develop skills for life, so you can take charge of your future and ours. Be part of our talented Gas Engineer team and unbox your passion at the UK's best-known retailer in tech.
Our client, a leading organisation within the United Kingdom's Net Zero strategy, has an immediate opportunity for a Hydrogen Metering Specialist to join the business. The Hydrogen Metering Manager is responsible for managing and improving metering provisions and processes. The Hydrogen Metering Manager will, Be a subject matter expert for the business across all Hydrogen Metering related issues and work packages. Understand interactions between Hydrogen Metering and other Metering assets i.e. electricity, gas, and CO2. Lead the development of guidance documentation and processes relating to Hydrogen Metering and the compliance of Hydrogen Producers. Oversee and manage due diligence in relation to the audit of Producers metering equipment and documentation. Manage 3rd party relationships. The successful application will demonstrate, 2 years operational experience in gas, offshore or water metering. Knowledge of metering markets. Experience in the design and implementation of new processes. Experience in the development of test assurance plans. If you demonstrate the required skills and experience for this position and wish to learn more then, please apply now.
May 16, 2024
Full time
Our client, a leading organisation within the United Kingdom's Net Zero strategy, has an immediate opportunity for a Hydrogen Metering Specialist to join the business. The Hydrogen Metering Manager is responsible for managing and improving metering provisions and processes. The Hydrogen Metering Manager will, Be a subject matter expert for the business across all Hydrogen Metering related issues and work packages. Understand interactions between Hydrogen Metering and other Metering assets i.e. electricity, gas, and CO2. Lead the development of guidance documentation and processes relating to Hydrogen Metering and the compliance of Hydrogen Producers. Oversee and manage due diligence in relation to the audit of Producers metering equipment and documentation. Manage 3rd party relationships. The successful application will demonstrate, 2 years operational experience in gas, offshore or water metering. Knowledge of metering markets. Experience in the design and implementation of new processes. Experience in the development of test assurance plans. If you demonstrate the required skills and experience for this position and wish to learn more then, please apply now.
Your new company Founded in 1987, our client is the UK's leading facilities management and professional services company. Across the country, our 77,500 people look after a large, diverse, blue chip customer base, from banks and retailers, to hospitals, schools and critical government strategic assets. We take care of our customers' people and buildings, by delivering the basics brilliantly and deploying advanced technology. Your new role Ensure compliance with statutory health and safety regulations.Provide technical advice related to HTM (Healthcare Technical Memoranda). Oversee Safe Systems of Work implementation and administration. Offer Technical advice to engineers and other staff Root cause analysis of problems Auditing/Inspection What you'll need to succeed Background in engineering - either electrical or mechanical biasFamiliarity with HTM guidelines is desirable IENG or working towards this LV, HV and AP experience are highly desirable Personality Skills: Strong communication, problem-solving, and leadership skills. Clean driving licence One of the below would be useful: HTM-01 - Decontamination HTM-02 - Medical Gasses HTM-03 - Ventilation HTM-04 - Water HTM-05 - Fire HTM-06 - Electrical HTM 07 - Environment HTM 08 - Specialist Services (Lifts) . Pressure Systems Water Gas Fire Mgr Boiler Operator Accred Scheme (BOAS) Fuels & Oils Excavations Confined Spaces Working at Height What you'll get in return Training and upskilling opportunities Internal promotion opportunities Pension scheme Holidays Cycle to work scheme Employee shares scheme Car allowance or vehicle provided What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. Hays Talent Solutions is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
May 16, 2024
Full time
Your new company Founded in 1987, our client is the UK's leading facilities management and professional services company. Across the country, our 77,500 people look after a large, diverse, blue chip customer base, from banks and retailers, to hospitals, schools and critical government strategic assets. We take care of our customers' people and buildings, by delivering the basics brilliantly and deploying advanced technology. Your new role Ensure compliance with statutory health and safety regulations.Provide technical advice related to HTM (Healthcare Technical Memoranda). Oversee Safe Systems of Work implementation and administration. Offer Technical advice to engineers and other staff Root cause analysis of problems Auditing/Inspection What you'll need to succeed Background in engineering - either electrical or mechanical biasFamiliarity with HTM guidelines is desirable IENG or working towards this LV, HV and AP experience are highly desirable Personality Skills: Strong communication, problem-solving, and leadership skills. Clean driving licence One of the below would be useful: HTM-01 - Decontamination HTM-02 - Medical Gasses HTM-03 - Ventilation HTM-04 - Water HTM-05 - Fire HTM-06 - Electrical HTM 07 - Environment HTM 08 - Specialist Services (Lifts) . Pressure Systems Water Gas Fire Mgr Boiler Operator Accred Scheme (BOAS) Fuels & Oils Excavations Confined Spaces Working at Height What you'll get in return Training and upskilling opportunities Internal promotion opportunities Pension scheme Holidays Cycle to work scheme Employee shares scheme Car allowance or vehicle provided What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. Hays Talent Solutions is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.
Air Conditioning & Refrigeration Engineer is required for our client a Global HVAC manufacturer who specialise in HVAC, Close Control and Data Centre systems. Our client currently requires Air Conditioning & Refrigeration Engineer with close proximity to Slough to due to continued growth within the organisation on expanding Data Centre Contracts. Air Conditioning & Refrigeration Engineer will be joining the service team, and will be expected to travel to Data Centres properties throughout Slough. The Air Conditioning & Refrigeration Engineer will be tasked with the service, maintenance, fault finding, repair, breakdowns of the manufacturers chiller systems & DX units. This is a fantastic opportunity for an experienced Air Conditioning & Refrigeration Engineer who wants to work for a leading HVAC Manufacturer. Air Conditioning & Refrigeration Engineer will need to hold an F-Gas 2079 Cat 1 Certificate and hold a full U.K. Driving Licence. Air Conditioning & Refrigeration Engineer Position Requirements F-Gas 2079 Cat-1 Knowledge on Air Conditioning and Cooling systems Be based with commutable distance to Slough Full UK Driving Licence Air Conditioning & Refrigeration Engineer Position Remuneration Basic Salary £40-45k 39 hour working week Door to Door travel paid Overtime available at 1.5x/2x On call rota 1 in 6 - £335 retainer paid + overtime rates for call out Company Van - Optional Personal Use Fuel Card 25 Days Holiday + Bank Holidays Pension contribution - 7% Company, 1% Employee or more Further package details to be discussed Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, and contact you in relation to this application and the services we offer.
May 16, 2024
Full time
Air Conditioning & Refrigeration Engineer is required for our client a Global HVAC manufacturer who specialise in HVAC, Close Control and Data Centre systems. Our client currently requires Air Conditioning & Refrigeration Engineer with close proximity to Slough to due to continued growth within the organisation on expanding Data Centre Contracts. Air Conditioning & Refrigeration Engineer will be joining the service team, and will be expected to travel to Data Centres properties throughout Slough. The Air Conditioning & Refrigeration Engineer will be tasked with the service, maintenance, fault finding, repair, breakdowns of the manufacturers chiller systems & DX units. This is a fantastic opportunity for an experienced Air Conditioning & Refrigeration Engineer who wants to work for a leading HVAC Manufacturer. Air Conditioning & Refrigeration Engineer will need to hold an F-Gas 2079 Cat 1 Certificate and hold a full U.K. Driving Licence. Air Conditioning & Refrigeration Engineer Position Requirements F-Gas 2079 Cat-1 Knowledge on Air Conditioning and Cooling systems Be based with commutable distance to Slough Full UK Driving Licence Air Conditioning & Refrigeration Engineer Position Remuneration Basic Salary £40-45k 39 hour working week Door to Door travel paid Overtime available at 1.5x/2x On call rota 1 in 6 - £335 retainer paid + overtime rates for call out Company Van - Optional Personal Use Fuel Card 25 Days Holiday + Bank Holidays Pension contribution - 7% Company, 1% Employee or more Further package details to be discussed Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, and contact you in relation to this application and the services we offer.
Got a knack for engineering and a passion for making a real difference in the healthcare world? We're working with an awesome company that's pushing boundaries in the medical gas delivery space. They're on the hunt for a Lead Engineer who's ready to dive into designing life-saving gas systems and more. What You'll Be Doing: Dreaming up and designing top-notch medical gas systems like Gas Manifolds, AVSU's, Terminal Units basically, all the cool stuff that keeps hospitals running smoothly. Collaborating with a bunch of talented people including the sales team, product managers and directly with customers to make sure all the i's are dotted and t's are crossed. Overseeing the journey of your designs from the drawing board all the way to production and installation. You'll have your hands in every pie, ensuring everything runs like clockwork. Who We're Looking For: Someone who's got a fire in their belly for innovation and isn't afraid to bring fresh ideas to the table. Someone with a background in medical gas engineering. Perhaps you've been involved in Customer Engineering, Project Engineering or Design Engineering, but what they're really looking for is someone who has the knowledge of Gases, specifically in a healthcare setting so hospitals, clinics etc. A team player who's as comfortable talking shop with engineers as they are explaining the nitty-gritty to clients or brainstorming with sales folks. The Goodies: A salary that'll make you smile (up to £90k), plus a bonus to sweeten the deal. 33 days of holiday to chill, an enhanced pension plan, and a culture that's all about lifting each other up and succeeding together. Why You'll Love It: This isn't just another job. It's a chance to be at the forefront of something big, working on projects that have a direct impact on saving lives. Plus, you'll be joining a team that's all about growth, support, and making work fun. Feeling Inspired? If this sounds like the adventure you've been waiting for, we'd love to hear from you. Whether you're a seasoned pro in medical gas systems or you've got experience designing other medical devices and are itching for a change, Apply now!
May 16, 2024
Full time
Got a knack for engineering and a passion for making a real difference in the healthcare world? We're working with an awesome company that's pushing boundaries in the medical gas delivery space. They're on the hunt for a Lead Engineer who's ready to dive into designing life-saving gas systems and more. What You'll Be Doing: Dreaming up and designing top-notch medical gas systems like Gas Manifolds, AVSU's, Terminal Units basically, all the cool stuff that keeps hospitals running smoothly. Collaborating with a bunch of talented people including the sales team, product managers and directly with customers to make sure all the i's are dotted and t's are crossed. Overseeing the journey of your designs from the drawing board all the way to production and installation. You'll have your hands in every pie, ensuring everything runs like clockwork. Who We're Looking For: Someone who's got a fire in their belly for innovation and isn't afraid to bring fresh ideas to the table. Someone with a background in medical gas engineering. Perhaps you've been involved in Customer Engineering, Project Engineering or Design Engineering, but what they're really looking for is someone who has the knowledge of Gases, specifically in a healthcare setting so hospitals, clinics etc. A team player who's as comfortable talking shop with engineers as they are explaining the nitty-gritty to clients or brainstorming with sales folks. The Goodies: A salary that'll make you smile (up to £90k), plus a bonus to sweeten the deal. 33 days of holiday to chill, an enhanced pension plan, and a culture that's all about lifting each other up and succeeding together. Why You'll Love It: This isn't just another job. It's a chance to be at the forefront of something big, working on projects that have a direct impact on saving lives. Plus, you'll be joining a team that's all about growth, support, and making work fun. Feeling Inspired? If this sounds like the adventure you've been waiting for, we'd love to hear from you. Whether you're a seasoned pro in medical gas systems or you've got experience designing other medical devices and are itching for a change, Apply now!
Company description: About RINA: RINA is a 6,000 strong global engineering services firm, providing innovative services to critical industry sectors, including Defence, Industrial, Energy, Oil & Gas, Power, Renewables, Transport and infrastructure sectors. It operates out of 70 countries, giving us the depth of experience across engineering disciplines and have a strong reputation providing services click apply for full job details
May 16, 2024
Full time
Company description: About RINA: RINA is a 6,000 strong global engineering services firm, providing innovative services to critical industry sectors, including Defence, Industrial, Energy, Oil & Gas, Power, Renewables, Transport and infrastructure sectors. It operates out of 70 countries, giving us the depth of experience across engineering disciplines and have a strong reputation providing services click apply for full job details
Commercial Service Engineer Lancashire £45,000 - £50,000 + Company Vehicle + Fuel Card + Qualification Support + Door To Door Payment Are you looking for a job that offers you job security and a sociable working environment with an incredible benefits package? The company is a well-established plumbing and heating provider based in the North West and has been experiencing a massive influx of growth click apply for full job details
May 16, 2024
Full time
Commercial Service Engineer Lancashire £45,000 - £50,000 + Company Vehicle + Fuel Card + Qualification Support + Door To Door Payment Are you looking for a job that offers you job security and a sociable working environment with an incredible benefits package? The company is a well-established plumbing and heating provider based in the North West and has been experiencing a massive influx of growth click apply for full job details
Location - Newcastle, UK Contract Duration: 12 months contract Hourly rate: •28.50 for night shift (40% for 4 shift pattern - only apply to shift workers) & •20.14 for day shift Industry: Oil Field Services No of Positions: 04 of these roles will be on shift, and 01 will be covering dayshift. Work hours: The shift pattern for shift workers is 4 shift pattern (Days (7am-7pm) and nights (7pm-7am), Starts again after 4 weeks Role Summary: - We are looking for Quality control Technicians to join the Flexible Pipe Systems (FPS) team in Newcastle for an initial period of 12 months. Receiving Inspection experience is a must, as well as a working knowledge of Microsoft products and the ability to interpret specifications and drawings. Experience of writing detailed reports, e.g. Non-conformance reports would be an advantage. ROLE DUTIES â Based on days to fulfil cert review and visual inspection duties but fully trained in all aspects of the QC Technician role. â Include the following but other duties may be assigned:- â Interface with Customer/Third Party/certifying authority representatives, as required. â Provide technical support/guidance to work centres for training process inspectors. â Write and revise quality control procedures and related forms â Assist in failure analysis â Perform Receiving Inspection Completion of pipe maps â Administration/sign off/verification of inspections â Verify dimensional and inspection reports for product conformance â Assure identification and traceability of product and materials at all stages of manufacturing process â Write detailed reports as required â Generate Non-compliance reports (NCR's) in accordance with applicable procedures â Random verification and audit of inspection activities and laboratory testing to support shift. â Perform calibration of measuring and test equipment Inspect and approve formed Flexlok and Carcass profile samples â Actively participate in Continuous Improvement initiatives â Provide Technical support to work centres & projects on Quality Control requirements â Perform any other duties as directed by the Quality Control Supervisor. â This position has no supervisory responsibilities PERSONALITY â Pleasant personality with good interpersonal skills (articulate, confident, mature and able to work as part of a team) â Flexible attitude and proactive approach coupled with high quality customer service â Good common sense and the ability to use own initiative in prioritising workload EXPERIENCE , â Working knowledge of ISOAPI Quality Systems, Quality practices and applications, and Continuous Improvement Tools. â Ability to respond to common enquiries from management. â Ability to define problems, collect data, establish facts and draw valid conclusions. â Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and detailed drawings. â Competent on all process inspection activities. â Requires working knowledge of Microsoft word, excel and outlook. â Knowledge of Goods Receiving Inspection Systems and/or supplier certification is desirable. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
May 16, 2024
Contractor
Location - Newcastle, UK Contract Duration: 12 months contract Hourly rate: •28.50 for night shift (40% for 4 shift pattern - only apply to shift workers) & •20.14 for day shift Industry: Oil Field Services No of Positions: 04 of these roles will be on shift, and 01 will be covering dayshift. Work hours: The shift pattern for shift workers is 4 shift pattern (Days (7am-7pm) and nights (7pm-7am), Starts again after 4 weeks Role Summary: - We are looking for Quality control Technicians to join the Flexible Pipe Systems (FPS) team in Newcastle for an initial period of 12 months. Receiving Inspection experience is a must, as well as a working knowledge of Microsoft products and the ability to interpret specifications and drawings. Experience of writing detailed reports, e.g. Non-conformance reports would be an advantage. ROLE DUTIES â Based on days to fulfil cert review and visual inspection duties but fully trained in all aspects of the QC Technician role. â Include the following but other duties may be assigned:- â Interface with Customer/Third Party/certifying authority representatives, as required. â Provide technical support/guidance to work centres for training process inspectors. â Write and revise quality control procedures and related forms â Assist in failure analysis â Perform Receiving Inspection Completion of pipe maps â Administration/sign off/verification of inspections â Verify dimensional and inspection reports for product conformance â Assure identification and traceability of product and materials at all stages of manufacturing process â Write detailed reports as required â Generate Non-compliance reports (NCR's) in accordance with applicable procedures â Random verification and audit of inspection activities and laboratory testing to support shift. â Perform calibration of measuring and test equipment Inspect and approve formed Flexlok and Carcass profile samples â Actively participate in Continuous Improvement initiatives â Provide Technical support to work centres & projects on Quality Control requirements â Perform any other duties as directed by the Quality Control Supervisor. â This position has no supervisory responsibilities PERSONALITY â Pleasant personality with good interpersonal skills (articulate, confident, mature and able to work as part of a team) â Flexible attitude and proactive approach coupled with high quality customer service â Good common sense and the ability to use own initiative in prioritising workload EXPERIENCE , â Working knowledge of ISOAPI Quality Systems, Quality practices and applications, and Continuous Improvement Tools. â Ability to respond to common enquiries from management. â Ability to define problems, collect data, establish facts and draw valid conclusions. â Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, and detailed drawings. â Competent on all process inspection activities. â Requires working knowledge of Microsoft word, excel and outlook. â Knowledge of Goods Receiving Inspection Systems and/or supplier certification is desirable. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
Commercial Gas/HVAC Engineer (Local Patch) £45,000 - £48,000 (OTE in excess of £60,000) + Training + Progression + Excellent Benefits Hertfordshire, Ideally Located: Watford, St Albans, Bishop's Stortford, Stevenage, Luton, Hitchin Are you a Commercial Gas/HVAC Engineer looking for a secure, days based position within a market leading company who invest in their staff, with plenty of overtime oppor click apply for full job details
May 16, 2024
Full time
Commercial Gas/HVAC Engineer (Local Patch) £45,000 - £48,000 (OTE in excess of £60,000) + Training + Progression + Excellent Benefits Hertfordshire, Ideally Located: Watford, St Albans, Bishop's Stortford, Stevenage, Luton, Hitchin Are you a Commercial Gas/HVAC Engineer looking for a secure, days based position within a market leading company who invest in their staff, with plenty of overtime oppor click apply for full job details
Position: Technical Buyer Daily duties and responsibilities/summary of role : We are currently looking for an experienced technical buyer to join our team. Bowyer Engineering Ltd was established over 70 years ago and specialise in the manufacture of high precision, high quality components suppled direct to various sectors including Aerospace, automotive, oil and gas. The right candidate will be comfortable purchasing material, components, and sub-contract processes in line with company procedures and KPI's. You will ensure that all customer requirements are accurately flowed down to suppliers. Monitor outstanding purchase orders and expedite delivery. Obtain competitive quotes for goods and services based on identified project requirements. Manage supplier performance, monitoring and develop relationships to ensure that business requirements are met, including T&C's and NDA's. Skills and qualifications : The ideal candidate will have familiar manufacturing background and experience as a technical buyer and will also have the: Ability to read engineering drawings Understanding of raw materials specifications Knowledge of special processes Microsoft office skills Knowledge of aerospace specifications such as AS9100, RR 9000 SABRe etc. would be a distinct advantage Syspro ERP skills would be an advantage. Essential Requirements: Previous experience in a similar role. Enthusiastic approach. Be able to work without close supervision. Energetic and dynamic individual with "can do" attitude. Punctual, reliable, and trustworthy. Benefits: Bike 2 work scheme Death in service On site parking 25 days holiday plus all bank holidays Start Date: ASAP Duration: Permanent with a 3-month probation period. Contracted Hours: 8am-5pm Monday - Thursday and 8am -1pm Friday Salary: Negotiable, dependant on skills and experience.
May 16, 2024
Full time
Position: Technical Buyer Daily duties and responsibilities/summary of role : We are currently looking for an experienced technical buyer to join our team. Bowyer Engineering Ltd was established over 70 years ago and specialise in the manufacture of high precision, high quality components suppled direct to various sectors including Aerospace, automotive, oil and gas. The right candidate will be comfortable purchasing material, components, and sub-contract processes in line with company procedures and KPI's. You will ensure that all customer requirements are accurately flowed down to suppliers. Monitor outstanding purchase orders and expedite delivery. Obtain competitive quotes for goods and services based on identified project requirements. Manage supplier performance, monitoring and develop relationships to ensure that business requirements are met, including T&C's and NDA's. Skills and qualifications : The ideal candidate will have familiar manufacturing background and experience as a technical buyer and will also have the: Ability to read engineering drawings Understanding of raw materials specifications Knowledge of special processes Microsoft office skills Knowledge of aerospace specifications such as AS9100, RR 9000 SABRe etc. would be a distinct advantage Syspro ERP skills would be an advantage. Essential Requirements: Previous experience in a similar role. Enthusiastic approach. Be able to work without close supervision. Energetic and dynamic individual with "can do" attitude. Punctual, reliable, and trustworthy. Benefits: Bike 2 work scheme Death in service On site parking 25 days holiday plus all bank holidays Start Date: ASAP Duration: Permanent with a 3-month probation period. Contracted Hours: 8am-5pm Monday - Thursday and 8am -1pm Friday Salary: Negotiable, dependant on skills and experience.
Job Title: Assembly Technician About Us: "OneSubsea is the world's leading subsea technology and solutions provider. They're the people calling for a new subsea era, where oil and gas production is a lot more efficient, and emissions are a lot lower. They're also pushing to accelerate subsea carbon capture and new energy solutions." We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. That is our purpose. As innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act- how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer. Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. Location: Barrow-in-Furness, UK. OneSubsea - Barrow, is SLB's centre of excellence for subsea connector systems, delivering World class connector solutions to the global energy industry. Our facility designs and manufactures cutting edge power, instrumentation and fibre optic wet mate connector technology for demanding deepwater and high-pressure applications. With 5 business units equipped with moulding, machining, assembly and test facilities, and 150 highly skilled engineers, technologists and manufacturing personnel, we deliver connector innovation to meet an ever-increasing global demand. We are located in in the Northwest of England on the edge of the Lake District National Park, one of the most beautiful areas in the world and now a UNESCO World Heritage Site. Job Summary: As a Fiber Optics Lab Technician, you will have the opportunity to work with cutting-edge connector technology, collaborate with a team of experienced engineers and technicians and learn valuable skills in fiber optic theory, lab techniques and problem-solving. You will be responsible for performing a range of lab tasks, including assembly, testing, troubleshooting and repair of fiber optic components and systems. This is an excellent opportunity for someone who is looking to start a career in the fiber optics-based technology industry and gain hands-on experience in a state-of-the-art lab environment. Duties & Responsibilities: Attention to detail: Candidates should be meticulous in their work, with the ability to maintain accurate records and identify potential issues with fiber optic components and systems. Manual dexterity: Candidates should have excellent manual dexterity, with the ability to work with small and delicate fiber optic components. Mechanical assembly: Candidates should be willing to learn mechanical assembly and have a desire to work with hand tools Communication and collaboration skills: Candidates should be able to work effectively in a team environment, communicating clearly and professionally with engineers, technicians, and other team members. Should have the ability to use collaborative tools like Teams and other O365 packages. Problem-solving and troubleshooting skills: Candidates should have a willingness to learn how to identify and solve problems with fiber optic components and systems, using critical thinking and analytical skills. Familiarity with industry standards and regulations: Candidates should have a desire to learn about industry standards and regulations related to fiber optics and be able to ensure compliance in the lab. Self-starter: Candidates should be self-motivated and able to work independently with minimal supervision. Initial training and supervision will be provided on products and processes. Proactive: Candidates should be proactive in identifying potential issues or areas for improvement in the lab and taking the initiative to address them. Qualifications and Experience: Clean room experience would be advantageous. Collaboration with the engineering to provide support for ongoing research and development projects Maintain a clean and organized laboratory environment, and ensure that all equipment is properly calibrated and functioning optimally Ensure compliance with safety regulations and procedures in the lab Strong attention to detail, manual dexterity, and ability to interpret mechanical drawings Excellent communication and collaboration skills, with the ability to work effectively in a team environment. Proactive, can take initiative to identify potential issues or areas for improvement in the lab Career Advancement: Every technical contributor in OneSubsea Barrow has access to a progression plan tailored to their job title, defining a clear path for promotion and reward, focusing on competency development. With support from Human Resources, Managers, and a network of technical experts, they are in control of their career growth from their first day of employment. What we can offer you: Competitive base salary with bonus, private healthcare for employee & family, subsidised dental care, Health & Wellbeing programs such as the Employee Mental health support, health & wellness coaching, part employer and employee funded pension contribution, Income protection scheme, life insurance. Other benefits are also available through the SLB flexible benefits program. SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
May 16, 2024
Full time
Job Title: Assembly Technician About Us: "OneSubsea is the world's leading subsea technology and solutions provider. They're the people calling for a new subsea era, where oil and gas production is a lot more efficient, and emissions are a lot lower. They're also pushing to accelerate subsea carbon capture and new energy solutions." We are a global technology company, driving energy innovation for a balanced planet. At SLB we create amazing technology that unlocks access to energy for the benefit of all. That is our purpose. As innovators, that's been our mission for 100 years. We are facing the world's greatest balancing act- how to simultaneously reduce emissions and meet the world's growing energy demands. We're working on that answer. Every day, a step closer. Our collective future depends on decarbonizing the fossil fuel industry, while innovating a new energy landscape. It's what drives us. Ensuring progress for people and the planet, on the journey to net zero and beyond. For a balanced planet. Location: Barrow-in-Furness, UK. OneSubsea - Barrow, is SLB's centre of excellence for subsea connector systems, delivering World class connector solutions to the global energy industry. Our facility designs and manufactures cutting edge power, instrumentation and fibre optic wet mate connector technology for demanding deepwater and high-pressure applications. With 5 business units equipped with moulding, machining, assembly and test facilities, and 150 highly skilled engineers, technologists and manufacturing personnel, we deliver connector innovation to meet an ever-increasing global demand. We are located in in the Northwest of England on the edge of the Lake District National Park, one of the most beautiful areas in the world and now a UNESCO World Heritage Site. Job Summary: As a Fiber Optics Lab Technician, you will have the opportunity to work with cutting-edge connector technology, collaborate with a team of experienced engineers and technicians and learn valuable skills in fiber optic theory, lab techniques and problem-solving. You will be responsible for performing a range of lab tasks, including assembly, testing, troubleshooting and repair of fiber optic components and systems. This is an excellent opportunity for someone who is looking to start a career in the fiber optics-based technology industry and gain hands-on experience in a state-of-the-art lab environment. Duties & Responsibilities: Attention to detail: Candidates should be meticulous in their work, with the ability to maintain accurate records and identify potential issues with fiber optic components and systems. Manual dexterity: Candidates should have excellent manual dexterity, with the ability to work with small and delicate fiber optic components. Mechanical assembly: Candidates should be willing to learn mechanical assembly and have a desire to work with hand tools Communication and collaboration skills: Candidates should be able to work effectively in a team environment, communicating clearly and professionally with engineers, technicians, and other team members. Should have the ability to use collaborative tools like Teams and other O365 packages. Problem-solving and troubleshooting skills: Candidates should have a willingness to learn how to identify and solve problems with fiber optic components and systems, using critical thinking and analytical skills. Familiarity with industry standards and regulations: Candidates should have a desire to learn about industry standards and regulations related to fiber optics and be able to ensure compliance in the lab. Self-starter: Candidates should be self-motivated and able to work independently with minimal supervision. Initial training and supervision will be provided on products and processes. Proactive: Candidates should be proactive in identifying potential issues or areas for improvement in the lab and taking the initiative to address them. Qualifications and Experience: Clean room experience would be advantageous. Collaboration with the engineering to provide support for ongoing research and development projects Maintain a clean and organized laboratory environment, and ensure that all equipment is properly calibrated and functioning optimally Ensure compliance with safety regulations and procedures in the lab Strong attention to detail, manual dexterity, and ability to interpret mechanical drawings Excellent communication and collaboration skills, with the ability to work effectively in a team environment. Proactive, can take initiative to identify potential issues or areas for improvement in the lab Career Advancement: Every technical contributor in OneSubsea Barrow has access to a progression plan tailored to their job title, defining a clear path for promotion and reward, focusing on competency development. With support from Human Resources, Managers, and a network of technical experts, they are in control of their career growth from their first day of employment. What we can offer you: Competitive base salary with bonus, private healthcare for employee & family, subsidised dental care, Health & Wellbeing programs such as the Employee Mental health support, health & wellness coaching, part employer and employee funded pension contribution, Income protection scheme, life insurance. Other benefits are also available through the SLB flexible benefits program. SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or other characteristics protected by law.
About this opportunity: Aims to deliver compelling starting points that fuel the invention of active ingredients for the client. This is a unique chance for a biologist who specialises in invertebrates to apply their expertise to propose, design and execute experiments to improve our understanding of these novel pesticides. If successful, you will be part of a team using automated analysis of behaviour to understand the activity of pesticides. You will be working to develop, run, automate and scale up behavioural assays to meet the needs of our screening platforms. You will work closely with the Invertebrate Genetics team and the Insect Control Lead Generation team and will be part of a larger cross-functional project team working towards these goals. Accountabilities: • Contribute to the digital innovation of invertebrate phenotyping via automated symptomology analysis. • Run semi-automated C. elegans behavioural assays. • Contribute to the development, validation, automation and scale-up of these assays. • Introduce new technologies, techniques, or ways of working to improve the productivity of existing projects/platforms. • Maintain awareness of key strategic project goals. Propose, design, and carry out appropriate experiments using invertebrates to achieve these goals. • Communicate with stakeholders on outcomes of experimental activities. • Train and assist other team members to run assays. • Maintain high standards of HSE compliance, which includes following all risk assessments, reporting of safety incidents and supporting the lab stewards community when requested. Experience & skills: • Must have a degree/PhD in a relevant science discipline. Appropriate technical science background is critical. • Must have worked with model or pest invertebrates. Experience with C. elegans is desirable. • Experience with behavioural analysis would be desirable. • Experience with the automation and scale up of assays would be desirable. • Experience with programming in Python would be desirable. • Excellent note keeping and organisational skills. • Ability to interact effectively with colleagues. Good influencing skills. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.
May 16, 2024
Contractor
About this opportunity: Aims to deliver compelling starting points that fuel the invention of active ingredients for the client. This is a unique chance for a biologist who specialises in invertebrates to apply their expertise to propose, design and execute experiments to improve our understanding of these novel pesticides. If successful, you will be part of a team using automated analysis of behaviour to understand the activity of pesticides. You will be working to develop, run, automate and scale up behavioural assays to meet the needs of our screening platforms. You will work closely with the Invertebrate Genetics team and the Insect Control Lead Generation team and will be part of a larger cross-functional project team working towards these goals. Accountabilities: • Contribute to the digital innovation of invertebrate phenotyping via automated symptomology analysis. • Run semi-automated C. elegans behavioural assays. • Contribute to the development, validation, automation and scale-up of these assays. • Introduce new technologies, techniques, or ways of working to improve the productivity of existing projects/platforms. • Maintain awareness of key strategic project goals. Propose, design, and carry out appropriate experiments using invertebrates to achieve these goals. • Communicate with stakeholders on outcomes of experimental activities. • Train and assist other team members to run assays. • Maintain high standards of HSE compliance, which includes following all risk assessments, reporting of safety incidents and supporting the lab stewards community when requested. Experience & skills: • Must have a degree/PhD in a relevant science discipline. Appropriate technical science background is critical. • Must have worked with model or pest invertebrates. Experience with C. elegans is desirable. • Experience with behavioural analysis would be desirable. • Experience with the automation and scale up of assays would be desirable. • Experience with programming in Python would be desirable. • Excellent note keeping and organisational skills. • Ability to interact effectively with colleagues. Good influencing skills. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.