Maintenance Engineer - Double Days A recognised high volume manufacturer are currently looking to strengthen their Maintenance department with the appointment of a Maintenance Engineer. As Maintenance Engineer, you will be responsible for carrying out maintenance work in line with the schedule and processes. Working from their manufacturing facility, the Maintenance Engineer will be responsible for: Planned preventative maintenance Mechanical/electrical breakdown cover for all activities on site Ability to read and understand both electrical and mechanical drawings Knowledge of PLC's Knowledge of Robots The successful candidate should have a minimum of two years experience and apprentice trained preferred. If you believe you have the required skills and experience please apply now. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.
Jul 18, 2026
Full time
Maintenance Engineer - Double Days A recognised high volume manufacturer are currently looking to strengthen their Maintenance department with the appointment of a Maintenance Engineer. As Maintenance Engineer, you will be responsible for carrying out maintenance work in line with the schedule and processes. Working from their manufacturing facility, the Maintenance Engineer will be responsible for: Planned preventative maintenance Mechanical/electrical breakdown cover for all activities on site Ability to read and understand both electrical and mechanical drawings Knowledge of PLC's Knowledge of Robots The successful candidate should have a minimum of two years experience and apprentice trained preferred. If you believe you have the required skills and experience please apply now. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.
A recognised high volume manufacturer are currently looking to strengthen their Manufacturing department with the appointment of a Manufacturing Engineer. As Manufacturing Engineer, you will responsible for leading the work-related development of new manufacturing processes. Working from their manufacturing facility in Shropshire, the Manufacturing Engineer will be responsible for: Develop and standardise documentation from concept to production. Work with the cross functional teams Maintain list of equipment suppliers with Purchasing Department Identify new suppliers and verify capabilities Summarise equipment and installation costs for quoting new business Standardise components to minimise spare parts inventory costs Lead the CAPEX based on purchasing of equipment and facilitate timing and budget Lead major projects installations for other functions such as maintenance Lead Machine FMEA and PFMEA for major equipment Apply AQPQ Product Methodology Create Cycle grams & Utilisation charts per process Cost Analysis & Budget control The successful candidate should have a minimum of HNC/HND in Manufacturing and/or Engineering and proven experience in Manufacturing or Production Engineering roles. If you believe you have the required skills and experience please apply now. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.
Jul 04, 2026
Full time
A recognised high volume manufacturer are currently looking to strengthen their Manufacturing department with the appointment of a Manufacturing Engineer. As Manufacturing Engineer, you will responsible for leading the work-related development of new manufacturing processes. Working from their manufacturing facility in Shropshire, the Manufacturing Engineer will be responsible for: Develop and standardise documentation from concept to production. Work with the cross functional teams Maintain list of equipment suppliers with Purchasing Department Identify new suppliers and verify capabilities Summarise equipment and installation costs for quoting new business Standardise components to minimise spare parts inventory costs Lead the CAPEX based on purchasing of equipment and facilitate timing and budget Lead major projects installations for other functions such as maintenance Lead Machine FMEA and PFMEA for major equipment Apply AQPQ Product Methodology Create Cycle grams & Utilisation charts per process Cost Analysis & Budget control The successful candidate should have a minimum of HNC/HND in Manufacturing and/or Engineering and proven experience in Manufacturing or Production Engineering roles. If you believe you have the required skills and experience please apply now. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.
We are currently recruiting for an experienced Launch Manager to lead and coordinate new model launch activities within our manufacturing plant. This is a key role responsible for ensuring successful product launches from prototype through to full production, working closely with cross-functional teams and customers to deliver projects on time, within budget, and to the highest quality standards. Key Responsibilities: Lead all plant launch operations for new model introductions. Coordinate prototype production and tooling trials with internal cross-functional teams. Chair onsite customer review meetings, providing clear updates on launch progress and milestone achievement. Monitor and control plant launch costs, ensuring projects remain within approved budgets. Drive achievement of key launch KPIs and programme timings, escalating and communicating any risks or delays. Present monthly launch status reports to senior management. Monitor build output rates throughout each launch phase, ensuring data is captured, analysed, and actions implemented where required. Ensure customer sign-off, internal equipment activities, and validation processes are successfully completed. Take full ownership and accountability for the successful completion and final plant sign-off of every new product launch. The Ideal Candidate will have proven experience of managing product launches within a high-volume manufacturing environment coupled with excellent communication skills across all levels and cross functional teams. If you believe you have the required skills and experience please apply now. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.
Jul 02, 2026
Full time
We are currently recruiting for an experienced Launch Manager to lead and coordinate new model launch activities within our manufacturing plant. This is a key role responsible for ensuring successful product launches from prototype through to full production, working closely with cross-functional teams and customers to deliver projects on time, within budget, and to the highest quality standards. Key Responsibilities: Lead all plant launch operations for new model introductions. Coordinate prototype production and tooling trials with internal cross-functional teams. Chair onsite customer review meetings, providing clear updates on launch progress and milestone achievement. Monitor and control plant launch costs, ensuring projects remain within approved budgets. Drive achievement of key launch KPIs and programme timings, escalating and communicating any risks or delays. Present monthly launch status reports to senior management. Monitor build output rates throughout each launch phase, ensuring data is captured, analysed, and actions implemented where required. Ensure customer sign-off, internal equipment activities, and validation processes are successfully completed. Take full ownership and accountability for the successful completion and final plant sign-off of every new product launch. The Ideal Candidate will have proven experience of managing product launches within a high-volume manufacturing environment coupled with excellent communication skills across all levels and cross functional teams. If you believe you have the required skills and experience please apply now. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.
M-Tec Engineering Solutions are currently engaged in the recruitment of Operations Director/Plant Director for a client whom have manufacturing facilities across Europe and the UK. Based from their UK Manufacturing facility near the Cotswolds, the Operations Director will form part of the senior management team and have full responsibility for all operational activities to include, manufacturing, quality, process improvements, 5S, Waste Management and Continuous Improvements. Key Areas of responsibility will include: Provide leadership and direction for operations and continuous improvement, to take in to consideration any capital expenditure projects and budget management Management of plant manufacturing and production departments with responsibilities for site wide HSE Define strategic direction via corporate and local goals and objectives in line with the long term business strategic goals. Development of innovative solutions to process inefficiencies and process improvements to deliver on pre-defined budgeted savings including cost-avoidance, manufacturing improvement and the minimisation of waste. Refined KPI measurement techniques and reporting frameworks for multiple production processes to provide accurate data for review and improvement targeting. Key Target Ares will include: Develop improvement strategies to support and maintain plant efficiently and general house keeping, to include, 5S, 7W, Lean, Quality, Maintenance Planning Work closely with Process & Maintenance teams to ensure OEE/OTIF targets are achieved as well as PPM & TPM to ensure continuous production. Requirements: Our client is looking for someone with drive and determination, and energy to see projects through to successful completion, someone with previous P&L responsibility as the Operations Director will have autonomy for budget/cost responsibility Proven experience in the utilisation of LEAN manufacturing principles to minimise waste and increase efficiency. Ideally of degree calibre in Engineering or Manufacturing, you should be able to demonstrate working within a Plastic related industry sector, coupled with strong commercial and business awareness You should have proven experience in management of profit and loss and margin improvement, taking in to account cost management models and people development and empowerment. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.
May 06, 2026
Full time
M-Tec Engineering Solutions are currently engaged in the recruitment of Operations Director/Plant Director for a client whom have manufacturing facilities across Europe and the UK. Based from their UK Manufacturing facility near the Cotswolds, the Operations Director will form part of the senior management team and have full responsibility for all operational activities to include, manufacturing, quality, process improvements, 5S, Waste Management and Continuous Improvements. Key Areas of responsibility will include: Provide leadership and direction for operations and continuous improvement, to take in to consideration any capital expenditure projects and budget management Management of plant manufacturing and production departments with responsibilities for site wide HSE Define strategic direction via corporate and local goals and objectives in line with the long term business strategic goals. Development of innovative solutions to process inefficiencies and process improvements to deliver on pre-defined budgeted savings including cost-avoidance, manufacturing improvement and the minimisation of waste. Refined KPI measurement techniques and reporting frameworks for multiple production processes to provide accurate data for review and improvement targeting. Key Target Ares will include: Develop improvement strategies to support and maintain plant efficiently and general house keeping, to include, 5S, 7W, Lean, Quality, Maintenance Planning Work closely with Process & Maintenance teams to ensure OEE/OTIF targets are achieved as well as PPM & TPM to ensure continuous production. Requirements: Our client is looking for someone with drive and determination, and energy to see projects through to successful completion, someone with previous P&L responsibility as the Operations Director will have autonomy for budget/cost responsibility Proven experience in the utilisation of LEAN manufacturing principles to minimise waste and increase efficiency. Ideally of degree calibre in Engineering or Manufacturing, you should be able to demonstrate working within a Plastic related industry sector, coupled with strong commercial and business awareness You should have proven experience in management of profit and loss and margin improvement, taking in to account cost management models and people development and empowerment. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.
Tool Maker - Double Days A recognised high volume manufacturer are currently looking to strengthen their Tooling department with the appointment of a Tool Maker. Working from their manufacturing facility in Shropshire, the Tool Maker will be responsible for: Preparation and maintenance of existing tooling according to requirements. Effectively identifies day to day tooling issues and implements corrective action where required. Cleaning of all production tooling to ensure on time delivery and schedule adherence goals are met. Ensures all tooling is safe and production ready at the time returned for production use, following correct preventative maintenance (PM) process. Ensures Leader is advised when assignments cannot be completed as planned. Supports coordination of engineering changes and supports maintenance of spare parts. Prepares and tests tools by laying out / setting up / machining. May design / make tools / templates to produce prototype parts of various materials including generating bill of material and complete fabrication and validation. Verifies conformance of machined and/or repaired tools to specifications by checking dimensions / clearances / alignments. May make parts of various plant machines and tools as required. Fits and assembles parts and test completed tools for proper operation. Sets up and carefully monitors tools and performs inspections prior to removing tooling from the machine. Follow up repair work by seeking feedback from the production and quality departments and completing a record of the work undertaken. Promote the companies HSE policies across the department and plant The successful candidate should have a minimum of an Apprenticeship and be familiar with die casting processes. If you believe you have the required skills and experience please apply now. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.
Apr 30, 2026
Full time
Tool Maker - Double Days A recognised high volume manufacturer are currently looking to strengthen their Tooling department with the appointment of a Tool Maker. Working from their manufacturing facility in Shropshire, the Tool Maker will be responsible for: Preparation and maintenance of existing tooling according to requirements. Effectively identifies day to day tooling issues and implements corrective action where required. Cleaning of all production tooling to ensure on time delivery and schedule adherence goals are met. Ensures all tooling is safe and production ready at the time returned for production use, following correct preventative maintenance (PM) process. Ensures Leader is advised when assignments cannot be completed as planned. Supports coordination of engineering changes and supports maintenance of spare parts. Prepares and tests tools by laying out / setting up / machining. May design / make tools / templates to produce prototype parts of various materials including generating bill of material and complete fabrication and validation. Verifies conformance of machined and/or repaired tools to specifications by checking dimensions / clearances / alignments. May make parts of various plant machines and tools as required. Fits and assembles parts and test completed tools for proper operation. Sets up and carefully monitors tools and performs inspections prior to removing tooling from the machine. Follow up repair work by seeking feedback from the production and quality departments and completing a record of the work undertaken. Promote the companies HSE policies across the department and plant The successful candidate should have a minimum of an Apprenticeship and be familiar with die casting processes. If you believe you have the required skills and experience please apply now. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.
We re currently recruiting for a Mould Technician for an internationally established plastics manufacture. The Injection Mould Technician will be required to work a three shift pattern (6am-2pm/2pm-10pm/10pm-6am) You ll work closely with production and tooling teams to improve processes, support new tool setups, reduce changeover times, and make sure everything is done right first time. You ll also lead the tool change team, promote safe working, and help drive continuous improvement across the plant. Further responsibilities include: Optimising moulding processes for quality and cycle time Leading and supporting the tool change team Setting up new tools and supporting start-ups Improving tool change times through SMED activities Spotting issues and suggesting better ways of working Carrying out basic audits and supporting safe, tidy working practices What We re Looking For: Strong technical understanding of moulding and tool change processes Proven ability to lead and motivate a team A proactive mindset with a focus on continuous improvement Commitment to safety, quality, and operational excellence If you re passionate about process optimisation, teamwork, and driving manufacturing performance, we d love to hear from you. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.
Apr 30, 2026
Full time
We re currently recruiting for a Mould Technician for an internationally established plastics manufacture. The Injection Mould Technician will be required to work a three shift pattern (6am-2pm/2pm-10pm/10pm-6am) You ll work closely with production and tooling teams to improve processes, support new tool setups, reduce changeover times, and make sure everything is done right first time. You ll also lead the tool change team, promote safe working, and help drive continuous improvement across the plant. Further responsibilities include: Optimising moulding processes for quality and cycle time Leading and supporting the tool change team Setting up new tools and supporting start-ups Improving tool change times through SMED activities Spotting issues and suggesting better ways of working Carrying out basic audits and supporting safe, tidy working practices What We re Looking For: Strong technical understanding of moulding and tool change processes Proven ability to lead and motivate a team A proactive mindset with a focus on continuous improvement Commitment to safety, quality, and operational excellence If you re passionate about process optimisation, teamwork, and driving manufacturing performance, we d love to hear from you. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.
A recognised high volume manufacturer are currently looking to strengthen their Maintenance department with the appointment of a Maintenance Planner. As Maintenance Planner, you will be responsible for planning, scheduling, and coordinating all maintenance activities to ensure minimal downtime and optimal asset performance. You will work closely with maintenance teams, operations, and suppliers to ensure resources, parts, and labour are effectively allocated. Working from their manufacturing facility in Shropshire, the Maintenance Planner will be responsible for: Develop and maintain preventive and corrective maintenance schedules Plan and coordinate shutdowns and major maintenance activities Ensure availability of required parts, tools, and resources Create detailed job plans and work packs Monitor maintenance KPIs and drive continuous improvement Maintain accurate records within the CMMS system Liaise with suppliers and contractors as required Support reliability and asset improvement initiatives Experience required in a similar Maintenance planning role and strong knowledge of CMMS systems. If you believe you have the required skills and experience please apply now. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.
Apr 28, 2026
Full time
A recognised high volume manufacturer are currently looking to strengthen their Maintenance department with the appointment of a Maintenance Planner. As Maintenance Planner, you will be responsible for planning, scheduling, and coordinating all maintenance activities to ensure minimal downtime and optimal asset performance. You will work closely with maintenance teams, operations, and suppliers to ensure resources, parts, and labour are effectively allocated. Working from their manufacturing facility in Shropshire, the Maintenance Planner will be responsible for: Develop and maintain preventive and corrective maintenance schedules Plan and coordinate shutdowns and major maintenance activities Ensure availability of required parts, tools, and resources Create detailed job plans and work packs Monitor maintenance KPIs and drive continuous improvement Maintain accurate records within the CMMS system Liaise with suppliers and contractors as required Support reliability and asset improvement initiatives Experience required in a similar Maintenance planning role and strong knowledge of CMMS systems. If you believe you have the required skills and experience please apply now. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.
Maintenance Engineer - 12 hr Continentals (2 days/2 nights, 4 off) A recognised high volume manufacturer are currently looking to strengthen their Maintenance department with the appointment of a Maintenance Engineer. As Maintenance Engineer, you will be responsible for carrying out maintenance work in line with the schedule and processes. Working from their manufacturing facility in Warwickshire, the Maintenance Engineer will be responsible for: Planned preventative maintenance Mechanical/electrical breakdown cover for all activities on site Ability to read and understand both electrical and mechanical drawings Knowledge of PLC's Knowledge of Robots The successful candidate should have a minimum of two years experience and apprentice trained preferred. If you believe you have the required skills and experience please apply now. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.
Apr 25, 2026
Full time
Maintenance Engineer - 12 hr Continentals (2 days/2 nights, 4 off) A recognised high volume manufacturer are currently looking to strengthen their Maintenance department with the appointment of a Maintenance Engineer. As Maintenance Engineer, you will be responsible for carrying out maintenance work in line with the schedule and processes. Working from their manufacturing facility in Warwickshire, the Maintenance Engineer will be responsible for: Planned preventative maintenance Mechanical/electrical breakdown cover for all activities on site Ability to read and understand both electrical and mechanical drawings Knowledge of PLC's Knowledge of Robots The successful candidate should have a minimum of two years experience and apprentice trained preferred. If you believe you have the required skills and experience please apply now. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.
