Mechanical Fitter (Workshop-Based) Location: Dalry, Ayrshire Duration: Until end of the year (approx. 9 months) Start Date: Immediate Work Environment: Workshop-based, onsite Working Hours: 38 hours per week Mon-Thu: 07:45 - 16:00 Fri: 07:45 - 14:30 Overtime: Available midweek on an adhoc basis and shutdowns Shutdowns: Up to 12 per year One major shutdown every six weeks (10-12 hour shifts) Additional planned shutdowns as required 38-hour working week with potential overtime subject to site needs. About the Role We are recruiting three Mechanical Fitters to support with workshop-based overhaul and repair activities. These roles are critical in ensuring the ongoing reliability of mechanical and rotating equipment across the site. Candidates will work as part of a high-performing maintenance team with a strong focus on equipment integrity, precision, and safe working practices. Key Responsibilities Workshop-Based Overhaul & Repairs Complete strip-down, inspection, overhaul, repair, and reassembly of mechanical equipment. Conduct workshop-based servicing across a range of rotating machinery. Perform detailed mechanical fault-finding and corrective maintenance. Rotating Equipment Work with pumps, gearboxes, motors, and associated rotating assets. Carry out component replacement, bearing changes, alignment tasks, and functional testing. Maintenance & Plant Support Support maintenance activities to ensure equipment reliability and availability. Interpret mechanical drawings, engineering schematics, and work instructions. Adhere to all site safety standards, procedures, and permit-to-work systems. Essential Requirements Proven experience as a Mechanical Fitter within industrial, manufacturing, or process environments. Strong knowledge of rotating equipment and workshop repair procedures. Demonstrable mechanical fault-finding and equipment overhaul skills. Ability to work onsite within an active plant environment. Preferred Experience & Qualifications Previous work in a plant environment , ideally within pharmaceuticals, chemicals, or similar regulated industries. Holding one or more industry safety cards (e.g., IC, CCNSG, or equivalent). Note: Exact card requirements are being confirmed with the client. Personal Attributes Methodical, safety-focused approach to all tasks. Strong practical engineering skills and attention to detail. Reliable, self-motivated, and able to work effectively within a workshop team. Additional Information Roles are workshop-based and not field installation roles. Umbrella Rates £48ph - Monday-Friday For more information, click apply
Apr 11, 2026
Contractor
Mechanical Fitter (Workshop-Based) Location: Dalry, Ayrshire Duration: Until end of the year (approx. 9 months) Start Date: Immediate Work Environment: Workshop-based, onsite Working Hours: 38 hours per week Mon-Thu: 07:45 - 16:00 Fri: 07:45 - 14:30 Overtime: Available midweek on an adhoc basis and shutdowns Shutdowns: Up to 12 per year One major shutdown every six weeks (10-12 hour shifts) Additional planned shutdowns as required 38-hour working week with potential overtime subject to site needs. About the Role We are recruiting three Mechanical Fitters to support with workshop-based overhaul and repair activities. These roles are critical in ensuring the ongoing reliability of mechanical and rotating equipment across the site. Candidates will work as part of a high-performing maintenance team with a strong focus on equipment integrity, precision, and safe working practices. Key Responsibilities Workshop-Based Overhaul & Repairs Complete strip-down, inspection, overhaul, repair, and reassembly of mechanical equipment. Conduct workshop-based servicing across a range of rotating machinery. Perform detailed mechanical fault-finding and corrective maintenance. Rotating Equipment Work with pumps, gearboxes, motors, and associated rotating assets. Carry out component replacement, bearing changes, alignment tasks, and functional testing. Maintenance & Plant Support Support maintenance activities to ensure equipment reliability and availability. Interpret mechanical drawings, engineering schematics, and work instructions. Adhere to all site safety standards, procedures, and permit-to-work systems. Essential Requirements Proven experience as a Mechanical Fitter within industrial, manufacturing, or process environments. Strong knowledge of rotating equipment and workshop repair procedures. Demonstrable mechanical fault-finding and equipment overhaul skills. Ability to work onsite within an active plant environment. Preferred Experience & Qualifications Previous work in a plant environment , ideally within pharmaceuticals, chemicals, or similar regulated industries. Holding one or more industry safety cards (e.g., IC, CCNSG, or equivalent). Note: Exact card requirements are being confirmed with the client. Personal Attributes Methodical, safety-focused approach to all tasks. Strong practical engineering skills and attention to detail. Reliable, self-motivated, and able to work effectively within a workshop team. Additional Information Roles are workshop-based and not field installation roles. Umbrella Rates £48ph - Monday-Friday For more information, click apply
We are currently recruiting Mechanical Fitters to join a leading rail engineering company. This role involves working on the removal, modification, and refitting of rolling stock to a high standard, following industry regulations and company procedures. Key Responsibilities: To have a good understanding of vehicle mechanical interfaces and repairs of vehicle components. To be able to install / repair components. To be able to fault find and carry out diagnostic investigation work. To overhaul of rail components. To undertake training as and when required. To work within a realistic timeframe. To ensure that waste is disposed of in the correct manner. To adhere to written or verbal instructions. Requirements: Previous experience in mechanical roles, or a similar hands-on trade/engineering environment. Confident in the use of hand tools, power tools, and workshop machinery. Strong attention to detail with the ability to read and follow technical instructions. Commitment to working safely and to company quality standards. Min level 2 engineering related qualification or equivalent required Open to the following industries: Rail, Aviation, HGV, Coach/PSV, Army, REME, Plant, FMCG.
Apr 11, 2026
Contractor
We are currently recruiting Mechanical Fitters to join a leading rail engineering company. This role involves working on the removal, modification, and refitting of rolling stock to a high standard, following industry regulations and company procedures. Key Responsibilities: To have a good understanding of vehicle mechanical interfaces and repairs of vehicle components. To be able to install / repair components. To be able to fault find and carry out diagnostic investigation work. To overhaul of rail components. To undertake training as and when required. To work within a realistic timeframe. To ensure that waste is disposed of in the correct manner. To adhere to written or verbal instructions. Requirements: Previous experience in mechanical roles, or a similar hands-on trade/engineering environment. Confident in the use of hand tools, power tools, and workshop machinery. Strong attention to detail with the ability to read and follow technical instructions. Commitment to working safely and to company quality standards. Min level 2 engineering related qualification or equivalent required Open to the following industries: Rail, Aviation, HGV, Coach/PSV, Army, REME, Plant, FMCG.
The Role: Working for a Plant Hire Attachment company, we need a Service Engineer / Fitter, based in North London. Your job will be to service / repair and maintain hydraulic attachments for excavators on customers sites covering the South East region, as well as on site repairs as and when required. Ideally you will have previous experience within a plant hire / service / hydraulic attachments role. The hours for this position are 7.00am - 5.00pm Monday - Friday, overtime after this is paid at x 1.5 Key Responsibilities: As a Fitter / Service Engineer your Job Role would Include: Attend Site to Manage Installs and Breakdowns Match Hydraulic Coupling, Test Ensuring Flow and Pressure Levels are Correct Liaise with Customers on Their Work Sites Present a Professional and Positive Attitude when on Customer Sites Service, Repair and PDI Equipment in the Workshop as Required Maintain Health & Safety to HSE & Company Standards Skills: The Ideal Candidate for the Fitter / Service Engineer Role Will Have: Full Clean Driving Licence Previous Mechanical Service / Hydraulic Experience Welding Experience Forklift Truck Trained Good Communication Skills Benefits: Within the Role of Fitter / Service Engineer, You Would Receive: Permanent Full Time Position Overtime at x 1.5 Monday to Friday Standard Working Week 7.00am - 5.00pm Pension Please follow the link to apply
Apr 11, 2026
Full time
The Role: Working for a Plant Hire Attachment company, we need a Service Engineer / Fitter, based in North London. Your job will be to service / repair and maintain hydraulic attachments for excavators on customers sites covering the South East region, as well as on site repairs as and when required. Ideally you will have previous experience within a plant hire / service / hydraulic attachments role. The hours for this position are 7.00am - 5.00pm Monday - Friday, overtime after this is paid at x 1.5 Key Responsibilities: As a Fitter / Service Engineer your Job Role would Include: Attend Site to Manage Installs and Breakdowns Match Hydraulic Coupling, Test Ensuring Flow and Pressure Levels are Correct Liaise with Customers on Their Work Sites Present a Professional and Positive Attitude when on Customer Sites Service, Repair and PDI Equipment in the Workshop as Required Maintain Health & Safety to HSE & Company Standards Skills: The Ideal Candidate for the Fitter / Service Engineer Role Will Have: Full Clean Driving Licence Previous Mechanical Service / Hydraulic Experience Welding Experience Forklift Truck Trained Good Communication Skills Benefits: Within the Role of Fitter / Service Engineer, You Would Receive: Permanent Full Time Position Overtime at x 1.5 Monday to Friday Standard Working Week 7.00am - 5.00pm Pension Please follow the link to apply
Mobile Plant Fitter/Workshop Manager (Water Treatment) Derbyshire £17 - £22.00 Per Hour + Overtime + Company Van + Fuel Card + Training + Company Benefits + Training + Progression Are you an experienced Workshop Manager or Plant Fitter with a strong mechanical background looking to take the next step in your career within a growing and well-established engineering business? Do you want to join a compa click apply for full job details
Apr 10, 2026
Full time
Mobile Plant Fitter/Workshop Manager (Water Treatment) Derbyshire £17 - £22.00 Per Hour + Overtime + Company Van + Fuel Card + Training + Company Benefits + Training + Progression Are you an experienced Workshop Manager or Plant Fitter with a strong mechanical background looking to take the next step in your career within a growing and well-established engineering business? Do you want to join a compa click apply for full job details
Workshop Plant Fitter Croydon £45,000 basic Vehicle (optional), 29 days holiday, overtime rate 1.5x, pension scheme and more Overview We are seeking a skilled and dedicated Workshop Plant Fitter to join our team. This role involves working on a wide range of plant machinery, including excavators, dumpers, rollers, telehandlers, and more. If you are passionate about machinery, have a strong technical background, and are looking for a rewarding career with excellent benefits, we encourage you to apply. Responsibilities Conduct maintenance, servicing, and repairs on a variety of plant machinery, including excavators, dumpers, rollers, telehandlers, and other equipment. Diagnose and troubleshoot mechanical, hydraulic, and electrical faults. Perform inspections to ensure machinery is in optimal working condition and complies with safety standards. Maintain accurate records of all work carried out, including parts used and repairs completed. Collaborate with the team to ensure efficient workflow and timely completion of tasks. Adhere to health and safety regulations at all times. Provide occasional support for field-based repairs when required. Qualifications Proven experience as a Plant Fitter or similar role, with expertise in working on plant machinery. Strong knowledge of mechanical, hydraulic, and electrical systems. Relevant qualifications in plant maintenance or engineering are desirable. Ability to read and interpret technical manuals and schematics. Excellent problem-solving skills and attention to detail. Strong communication and teamwork abilities. A valid driving license is preferred. Day-to-Day Work a 45-hour week, Monday to Friday, from 7:00 AM to 5:00 PM. Perform routine maintenance and emergency repairs on a variety of plant machinery. Collaborate with colleagues to ensure the smooth operation of the workshop. Maintain a clean and organized workspace. Occasionally assist with field-based repairs as needed. Benefits Competitive basic salary ranging from £36,000 to £45,000, depending on experience. Overtime opportunities available at 1.5x the standard rate. Generous holiday allowance of 29 days. Company vehicle can be supplied if required. Opportunity to work with a diverse range of machinery and develop your skills further. Supportive and professional working environment. If you are a motivated and experienced Workshop Plant Fitter looking for a new challenge, we would love to hear from you. Apply today to join our team and take the next step in your career! SER-IN
Apr 10, 2026
Full time
Workshop Plant Fitter Croydon £45,000 basic Vehicle (optional), 29 days holiday, overtime rate 1.5x, pension scheme and more Overview We are seeking a skilled and dedicated Workshop Plant Fitter to join our team. This role involves working on a wide range of plant machinery, including excavators, dumpers, rollers, telehandlers, and more. If you are passionate about machinery, have a strong technical background, and are looking for a rewarding career with excellent benefits, we encourage you to apply. Responsibilities Conduct maintenance, servicing, and repairs on a variety of plant machinery, including excavators, dumpers, rollers, telehandlers, and other equipment. Diagnose and troubleshoot mechanical, hydraulic, and electrical faults. Perform inspections to ensure machinery is in optimal working condition and complies with safety standards. Maintain accurate records of all work carried out, including parts used and repairs completed. Collaborate with the team to ensure efficient workflow and timely completion of tasks. Adhere to health and safety regulations at all times. Provide occasional support for field-based repairs when required. Qualifications Proven experience as a Plant Fitter or similar role, with expertise in working on plant machinery. Strong knowledge of mechanical, hydraulic, and electrical systems. Relevant qualifications in plant maintenance or engineering are desirable. Ability to read and interpret technical manuals and schematics. Excellent problem-solving skills and attention to detail. Strong communication and teamwork abilities. A valid driving license is preferred. Day-to-Day Work a 45-hour week, Monday to Friday, from 7:00 AM to 5:00 PM. Perform routine maintenance and emergency repairs on a variety of plant machinery. Collaborate with colleagues to ensure the smooth operation of the workshop. Maintain a clean and organized workspace. Occasionally assist with field-based repairs as needed. Benefits Competitive basic salary ranging from £36,000 to £45,000, depending on experience. Overtime opportunities available at 1.5x the standard rate. Generous holiday allowance of 29 days. Company vehicle can be supplied if required. Opportunity to work with a diverse range of machinery and develop your skills further. Supportive and professional working environment. If you are a motivated and experienced Workshop Plant Fitter looking for a new challenge, we would love to hear from you. Apply today to join our team and take the next step in your career! SER-IN
I am looking for a Field Service Engineer (Heavy Plant Fitter) to work near Exeter in Devon. This is a great opportunity to work for one of the country s leading mobile plant suppliers in the minerals and aggregates sector, which operates one of the most technologically advanced, environmentally friendly and newest fleets within Europe. My client is looking to recruit an experienced heavy plant engineer to help maintain its quarrying equipment. You will be working on premium, leading industry equipment brands such as Volvo, Caterpillar and Komatsu whilst carrying out repairs alongside an existing, dedicated team of engineers and welders. The ideal candidate would have experience and/or knowledge of the quarrying industry, with a formal engineering qualification in plant maintenance, agricultural machinery or HGV mechanics, such as NVQ level 3 / City and Guilds or time served. Training, where required, will be provided for the right candidate. Key Responsibilities You will repair and maintain heavy-duty quarrying equipment, including excavators, articulated hauliers, wheel loaders, bulldozers, etc. (Volvo & Caterpillar) to a high standard. You carry out inspections and prepare machines for hire or sale duties, such as check-ins/outs, fitting buckets or attachments, reversing cameras, radars. You will carry out major overhauls on engines, transmissions, axles, hydraulics. Diagnose and problem-solve mechanical, hydraulic or electrical issues on machines. Order parts for your repair as necessary, return any unused parts in a clean condition at the time of job completion. Job Skills & Requirements 5+ years relevant experience (post apprenticeship) in the repair and maintenance of Heavy Construction Plant Bulldozers, Dump Trucks, Excavators, Graders, Loading Shovels etc. NVQ or equivalent in engineering, mechanical, hydraulics, pneumatics and electronics. Experience in maintaining heavy quarry / mining / construction equipment. Knowledge and experience of working with Tier 4 and 5 engines, regen and AdBlue systems, Drive Lines, Hydraulics & Electrical Systems. Experience and knowledge of diagnostic equipment and procedures, including the use of laptops for fault finding/diagnostics, is preferred, but not essential. Training will be provided where required. Elevated level of Health & Safety knowledge & willingness to attend training courses. Computer literate with tablet-based maintenance and safety systems. Quick learner and able to work on own initiative, self-motivated and part of a workshop team. Willingness to attend internal and external training courses.
Apr 10, 2026
Full time
I am looking for a Field Service Engineer (Heavy Plant Fitter) to work near Exeter in Devon. This is a great opportunity to work for one of the country s leading mobile plant suppliers in the minerals and aggregates sector, which operates one of the most technologically advanced, environmentally friendly and newest fleets within Europe. My client is looking to recruit an experienced heavy plant engineer to help maintain its quarrying equipment. You will be working on premium, leading industry equipment brands such as Volvo, Caterpillar and Komatsu whilst carrying out repairs alongside an existing, dedicated team of engineers and welders. The ideal candidate would have experience and/or knowledge of the quarrying industry, with a formal engineering qualification in plant maintenance, agricultural machinery or HGV mechanics, such as NVQ level 3 / City and Guilds or time served. Training, where required, will be provided for the right candidate. Key Responsibilities You will repair and maintain heavy-duty quarrying equipment, including excavators, articulated hauliers, wheel loaders, bulldozers, etc. (Volvo & Caterpillar) to a high standard. You carry out inspections and prepare machines for hire or sale duties, such as check-ins/outs, fitting buckets or attachments, reversing cameras, radars. You will carry out major overhauls on engines, transmissions, axles, hydraulics. Diagnose and problem-solve mechanical, hydraulic or electrical issues on machines. Order parts for your repair as necessary, return any unused parts in a clean condition at the time of job completion. Job Skills & Requirements 5+ years relevant experience (post apprenticeship) in the repair and maintenance of Heavy Construction Plant Bulldozers, Dump Trucks, Excavators, Graders, Loading Shovels etc. NVQ or equivalent in engineering, mechanical, hydraulics, pneumatics and electronics. Experience in maintaining heavy quarry / mining / construction equipment. Knowledge and experience of working with Tier 4 and 5 engines, regen and AdBlue systems, Drive Lines, Hydraulics & Electrical Systems. Experience and knowledge of diagnostic equipment and procedures, including the use of laptops for fault finding/diagnostics, is preferred, but not essential. Training will be provided where required. Elevated level of Health & Safety knowledge & willingness to attend training courses. Computer literate with tablet-based maintenance and safety systems. Quick learner and able to work on own initiative, self-motivated and part of a workshop team. Willingness to attend internal and external training courses.
I am looking for a Field Service Engineer (Heavy Plant Fitter) to work near Exeter in Devon. This is a great opportunity to work for one of the country s leading mobile plant suppliers in the minerals and aggregates sector, which operates one of the most technologically advanced, environmentally friendly and newest fleets within Europe. My client is looking to recruit an experienced heavy plant engineer to help maintain its quarrying equipment. You will be working on premium, leading industry equipment brands such as Volvo, Caterpillar and Komatsu whilst carrying out repairs alongside an existing, dedicated team of engineers and welders. The ideal candidate would have experience and/or knowledge of the quarrying industry, with a formal engineering qualification in plant maintenance, agricultural machinery or HGV mechanics, such as NVQ level 3 / City and Guilds or time served. Training, where required, will be provided for the right candidate. Key Responsibilities You will repair and maintain heavy-duty quarrying equipment, including excavators, articulated hauliers, wheel loaders, bulldozers, etc. (Volvo & Caterpillar) to a high standard. You carry out inspections and prepare machines for hire or sale duties, such as check-ins/outs, fitting buckets or attachments, reversing cameras, radars. You will carry out major overhauls on engines, transmissions, axles, hydraulics. Diagnose and problem-solve mechanical, hydraulic or electrical issues on machines. Order parts for your repair as necessary, return any unused parts in a clean condition at the time of job completion. Job Skills & Requirements 5+ years relevant experience (post apprenticeship) in the repair and maintenance of Heavy Construction Plant Bulldozers, Dump Trucks, Excavators, Graders, Loading Shovels etc. NVQ or equivalent in engineering, mechanical, hydraulics, pneumatics and electronics. Experience in maintaining heavy quarry / mining / construction equipment. Knowledge and experience of working with Tier 4 and 5 engines, regen and AdBlue systems, Drive Lines, Hydraulics & Electrical Systems. Experience and knowledge of diagnostic equipment and procedures, including the use of laptops for fault finding/diagnostics, is preferred, but not essential. Training will be provided where required. Elevated level of Health & Safety knowledge & willingness to attend training courses. Computer literate with tablet-based maintenance and safety systems. Quick learner and able to work on own initiative, self-motivated and part of a workshop team. Willingness to attend internal and external training courses.
Apr 10, 2026
Full time
I am looking for a Field Service Engineer (Heavy Plant Fitter) to work near Exeter in Devon. This is a great opportunity to work for one of the country s leading mobile plant suppliers in the minerals and aggregates sector, which operates one of the most technologically advanced, environmentally friendly and newest fleets within Europe. My client is looking to recruit an experienced heavy plant engineer to help maintain its quarrying equipment. You will be working on premium, leading industry equipment brands such as Volvo, Caterpillar and Komatsu whilst carrying out repairs alongside an existing, dedicated team of engineers and welders. The ideal candidate would have experience and/or knowledge of the quarrying industry, with a formal engineering qualification in plant maintenance, agricultural machinery or HGV mechanics, such as NVQ level 3 / City and Guilds or time served. Training, where required, will be provided for the right candidate. Key Responsibilities You will repair and maintain heavy-duty quarrying equipment, including excavators, articulated hauliers, wheel loaders, bulldozers, etc. (Volvo & Caterpillar) to a high standard. You carry out inspections and prepare machines for hire or sale duties, such as check-ins/outs, fitting buckets or attachments, reversing cameras, radars. You will carry out major overhauls on engines, transmissions, axles, hydraulics. Diagnose and problem-solve mechanical, hydraulic or electrical issues on machines. Order parts for your repair as necessary, return any unused parts in a clean condition at the time of job completion. Job Skills & Requirements 5+ years relevant experience (post apprenticeship) in the repair and maintenance of Heavy Construction Plant Bulldozers, Dump Trucks, Excavators, Graders, Loading Shovels etc. NVQ or equivalent in engineering, mechanical, hydraulics, pneumatics and electronics. Experience in maintaining heavy quarry / mining / construction equipment. Knowledge and experience of working with Tier 4 and 5 engines, regen and AdBlue systems, Drive Lines, Hydraulics & Electrical Systems. Experience and knowledge of diagnostic equipment and procedures, including the use of laptops for fault finding/diagnostics, is preferred, but not essential. Training will be provided where required. Elevated level of Health & Safety knowledge & willingness to attend training courses. Computer literate with tablet-based maintenance and safety systems. Quick learner and able to work on own initiative, self-motivated and part of a workshop team. Willingness to attend internal and external training courses.
Workshop Manager/Mobile Plant Fitter (Water Treatment) South Derbyshire £17 - £22.00 Per Hour + Overtime + Company Van + Fuel Card + Training + Company Benefits + Training + Progression Are you an experienced Workshop Manager or Plant Fitter with a strong mechanical background looking to take the next step in your career within a growing and well-established engineering business? Do you want to join a click apply for full job details
Apr 09, 2026
Full time
Workshop Manager/Mobile Plant Fitter (Water Treatment) South Derbyshire £17 - £22.00 Per Hour + Overtime + Company Van + Fuel Card + Training + Company Benefits + Training + Progression Are you an experienced Workshop Manager or Plant Fitter with a strong mechanical background looking to take the next step in your career within a growing and well-established engineering business? Do you want to join a click apply for full job details
Mobile Engineer / Field Service Engineer / Plant Fitter - Volvo Wheel Loaders Glasgow Home-Based 50 Hours Up to 65,000 Company Van Mobile Engineer Field Service Engineer Plant Engineer Plant Fitter Are you an experienced Mobile Engineer, Field Service Engineer, Plant Engineer, Service Technician, Plant Fitter, Construction Equipment Engineer, or Heavy Plant Engineer looking for a well-paid autonomous field-based role? We are seeking a skilled engineer to cover the Glasgow and surrounding area, specialising primarily in Volvo wheel loaders, loading shovels, and heavy plant machinery. Candidates with previous experience working for OEMs, or independent heavy plant service providers are highly desirable. Salary & Benefits Up to 65,000 basic salary 50 hours per week contracted 28 days holiday Private medical Company pension Service van Home-based Monday to Friday Strong earning potential Excellent autonomy The Role This is a home-based field service / mobile breakdown engineer role covering Durham and nearby areas. You will attend customer sites directly from home, responding to breakdowns and carrying out: Emergency breakdown response Planned maintenance Servicing Fault finding and diagnostics Hydraulic and electrical repairs LOLER / inspection support Uptime and fleet support This is a 50-hour contracted salaried position, typically worked Monday to Friday between 7am and 6pm, with flexibility to manage your own diary. As long as the machines are operational and customer expectations are met, you will have the autonomy to structure your own day. This is an excellent opportunity for engineers from backgrounds such as: Mobile Plant Engineer Field Service Engineer Workshop Engineer looking to move mobile Heavy Plant Fitter Plant Technician Construction Equipment Engineer Loading Shovel Engineer Wheel Loader Engineer HGV / Plant Hybrid Engineer We are especially interested in engineers with experience on: Volvo L120 Wheel Loader Volvo loading shovels Wheel loaders Excavators ADTs / dumpers Telehandlers Crushing & screening equipment Quarry and aggregates machinery Key systems: Hydraulics Diesel engines Electrical diagnostics CANBUS fault finding Transmission systems Brake systems Driveline repairs Plant diagnostics software INDHP If you would like to know more about this position, then please forward your CV to (url removed) immediately. If you would like to discuss this position, please call (phone number removed) and ask to speak to Chloe. Please note Alecto Recruitment are acting as an employment business in relation to this vacancy. (mobile engineer, field service engineer, plant fitter, plant mechanic, heavy plant engineer, wheel loader engineer, loading shovel engineer, SMT engineer, Volvo CE engineer, service technician, mobile fitter)
Apr 09, 2026
Full time
Mobile Engineer / Field Service Engineer / Plant Fitter - Volvo Wheel Loaders Glasgow Home-Based 50 Hours Up to 65,000 Company Van Mobile Engineer Field Service Engineer Plant Engineer Plant Fitter Are you an experienced Mobile Engineer, Field Service Engineer, Plant Engineer, Service Technician, Plant Fitter, Construction Equipment Engineer, or Heavy Plant Engineer looking for a well-paid autonomous field-based role? We are seeking a skilled engineer to cover the Glasgow and surrounding area, specialising primarily in Volvo wheel loaders, loading shovels, and heavy plant machinery. Candidates with previous experience working for OEMs, or independent heavy plant service providers are highly desirable. Salary & Benefits Up to 65,000 basic salary 50 hours per week contracted 28 days holiday Private medical Company pension Service van Home-based Monday to Friday Strong earning potential Excellent autonomy The Role This is a home-based field service / mobile breakdown engineer role covering Durham and nearby areas. You will attend customer sites directly from home, responding to breakdowns and carrying out: Emergency breakdown response Planned maintenance Servicing Fault finding and diagnostics Hydraulic and electrical repairs LOLER / inspection support Uptime and fleet support This is a 50-hour contracted salaried position, typically worked Monday to Friday between 7am and 6pm, with flexibility to manage your own diary. As long as the machines are operational and customer expectations are met, you will have the autonomy to structure your own day. This is an excellent opportunity for engineers from backgrounds such as: Mobile Plant Engineer Field Service Engineer Workshop Engineer looking to move mobile Heavy Plant Fitter Plant Technician Construction Equipment Engineer Loading Shovel Engineer Wheel Loader Engineer HGV / Plant Hybrid Engineer We are especially interested in engineers with experience on: Volvo L120 Wheel Loader Volvo loading shovels Wheel loaders Excavators ADTs / dumpers Telehandlers Crushing & screening equipment Quarry and aggregates machinery Key systems: Hydraulics Diesel engines Electrical diagnostics CANBUS fault finding Transmission systems Brake systems Driveline repairs Plant diagnostics software INDHP If you would like to know more about this position, then please forward your CV to (url removed) immediately. If you would like to discuss this position, please call (phone number removed) and ask to speak to Chloe. Please note Alecto Recruitment are acting as an employment business in relation to this vacancy. (mobile engineer, field service engineer, plant fitter, plant mechanic, heavy plant engineer, wheel loader engineer, loading shovel engineer, SMT engineer, Volvo CE engineer, service technician, mobile fitter)
Our Business Selwood is the leading pump rental solutions company in the UK. We have an outstanding reputation for exceptional customer service backed by one of the largest fleets of quality pump products. Each customer and each project is unique and our deep technical knowledge means we are proud to deliver a bespoke and genuine 24/7, 365 days-a-year service. About the Role We are looking for Mobile Fitter to join the team from our branch in Willenhall, covering the surrounding region. This role will be responsible for carrying out Pump Maintenance as required at the branch location as well as customer sites Due to the nature of our branch operations this role will involve being part of a call out rota, which has a standby allowance plus excellent overtime payment. Responsibilities: You will be required to work safely as a priority and a knowledge of PPE requirements is critical. Be able to communicate accurately with work colleagues and customers alike. Ensure that you obtain signatures and names from sites to ensure the smooth processing of tasks. Keep a good standard of housekeeping ensuring work areas and vehicles are kept in good order and clean. You will be required to complete daily vehicle defect reports to always ensure safety. Be able to carry out all given tasks as set out by given instructions or as per relevant training within a timely manner. Show understanding of company policies and procedures. Skills and Experience: We are looking for someone who has a real passion and willingness to learn, what you ll get from us in return is great long term career opportunities within the niche pump industry. NVQ level 3 in Mechanical engineering (or other relevant qualifications) or equivalent work experience. Previous demonstratable experience of working with engines or a mechanical engineering background, with the ability to understand underlaying issues and how to resolve them. Experience of working in a plant environment, on site with customers and in a workshop would be beneficial. Able to listen, take on board information, and be able to translate this into practical solutions. Demonstrate a willingness to grow within the role, be open to training opportunities, learning new skills, and be committed to developing upon the knowledge you already have. Full UK driving license (with 6 points or less), as this role will involve attending site visits and break downs. What we can offer you We understand balancing work and life commitments isn t always easy, that s why we ve designed our benefits package to support you in all areas of life. Competitive salary Enhanced overtime pay (for additional hours and call outs) Medicash Scheme medical expenses scheme (access to 24hour online GP services) Pension scheme with contribution based on total earnings not just salary 25 days holiday + 8 Bank Holidays Increasing annual leave entitlement with long service Support for development and training Employee assistance programme (EAP) & access to Mental Health first aiders Employee discount scheme (discounts/vouchers for supermarkets, high street shops, holidays and more) Employee referral scheme This role is not open to Agencies - Please no calls or emails - Thank you. EDI Statement Workdry International Ltd is committed to encouraging equality, diversity, and inclusion among our workforce, and eliminating unlawful discrimination. We value transparency, respecting others and understanding differences. We give full and fair consideration to all applicants, regardless of age, disability, gender reassignment, race, religion or belief, sex, sexual orientation, marriage and civil partnership, and pregnancy and maternity. As part of your recruitment journey, we are happy to support requests for reasonable adjustments
Apr 09, 2026
Full time
Our Business Selwood is the leading pump rental solutions company in the UK. We have an outstanding reputation for exceptional customer service backed by one of the largest fleets of quality pump products. Each customer and each project is unique and our deep technical knowledge means we are proud to deliver a bespoke and genuine 24/7, 365 days-a-year service. About the Role We are looking for Mobile Fitter to join the team from our branch in Willenhall, covering the surrounding region. This role will be responsible for carrying out Pump Maintenance as required at the branch location as well as customer sites Due to the nature of our branch operations this role will involve being part of a call out rota, which has a standby allowance plus excellent overtime payment. Responsibilities: You will be required to work safely as a priority and a knowledge of PPE requirements is critical. Be able to communicate accurately with work colleagues and customers alike. Ensure that you obtain signatures and names from sites to ensure the smooth processing of tasks. Keep a good standard of housekeeping ensuring work areas and vehicles are kept in good order and clean. You will be required to complete daily vehicle defect reports to always ensure safety. Be able to carry out all given tasks as set out by given instructions or as per relevant training within a timely manner. Show understanding of company policies and procedures. Skills and Experience: We are looking for someone who has a real passion and willingness to learn, what you ll get from us in return is great long term career opportunities within the niche pump industry. NVQ level 3 in Mechanical engineering (or other relevant qualifications) or equivalent work experience. Previous demonstratable experience of working with engines or a mechanical engineering background, with the ability to understand underlaying issues and how to resolve them. Experience of working in a plant environment, on site with customers and in a workshop would be beneficial. Able to listen, take on board information, and be able to translate this into practical solutions. Demonstrate a willingness to grow within the role, be open to training opportunities, learning new skills, and be committed to developing upon the knowledge you already have. Full UK driving license (with 6 points or less), as this role will involve attending site visits and break downs. What we can offer you We understand balancing work and life commitments isn t always easy, that s why we ve designed our benefits package to support you in all areas of life. Competitive salary Enhanced overtime pay (for additional hours and call outs) Medicash Scheme medical expenses scheme (access to 24hour online GP services) Pension scheme with contribution based on total earnings not just salary 25 days holiday + 8 Bank Holidays Increasing annual leave entitlement with long service Support for development and training Employee assistance programme (EAP) & access to Mental Health first aiders Employee discount scheme (discounts/vouchers for supermarkets, high street shops, holidays and more) Employee referral scheme This role is not open to Agencies - Please no calls or emails - Thank you. EDI Statement Workdry International Ltd is committed to encouraging equality, diversity, and inclusion among our workforce, and eliminating unlawful discrimination. We value transparency, respecting others and understanding differences. We give full and fair consideration to all applicants, regardless of age, disability, gender reassignment, race, religion or belief, sex, sexual orientation, marriage and civil partnership, and pregnancy and maternity. As part of your recruitment journey, we are happy to support requests for reasonable adjustments
Digital / GPS / HFR Plant Fitter About Flannery Plant Hire: Flannery Plant Hire is a leading provider of operated and self-drive plant equipment, with a strong reputation for delivering high-quality, reliable machinery to the UK's largest infrastructure and construction projects. We are proud to be at the forefront of innovation and sustainability in plant hire, embracing the latest technology to support our clients and operators. Job Purpose: The Plant Fitter will be responsible for the servicing, maintenance, and calibration of digital systems installed on construction plant equipment, including GPS Machine Control systems and Human Form Recognition (HFR) safety technology. This is a static, depot-based role working on plant machinery within the company's workshop facilities. The role focuses on preparing machinery with the required digital technology before it is deployed to operational sites. This also includes the checking and verification of all off hired plant and reporting and resolving all defects to the site foreman. Full training will be provided to develop knowledge in machine control technology, plant electronics, and digital construction systems. Key Responsibilities Installation & System Integration • Install and configure GPS Machine Control systems on construction plant machinery including excavators, dozers, and graders. • Install and commission Human Form Recognition (HFR) safety systems designed to detect personnel around plant equipment. • Carry out sensor installation, GPS antenna mounting, wiring, and system configuration within the depot workshop. Service & Maintenance • Perform routine servicing, testing, and maintenance of machine control and HFR systems. • Diagnose and repair electrical, electronic, and mechanical faults relating to installed technology. • Ensure all equipment is functioning correctly prior to deployment. Calibration & System Checks • Calibrate sensors, machine control components, and system parameters to ensure accurate operation. • Conduct system testing and accuracy checks within the depot environment. Data Handling & Machine Setup • Upload machine control data including DTM files and digital terrain models where required. • Assist with system configuration and data preparation using office-based computer systems. Workshop Support • Work alongside workshop engineers to ensure machinery is fully prepared and compliant with operational requirements. • Assist with equipment preparation, upgrades, and system improvements. Qualifications & Experience • Experience working with construction plant, agricultural machinery, or heavy equipment. • Background as a mechanical technician, or workshop engineer is desirable. • Basic understanding of mechanical, electrical installations. • Comfortable working with computers and electronic equipment. • Full UK driving licence desirable. Key Skills & Attributes • Strong mechanical and technical aptitude • Attention to detail and accuracy • Problem-solving and fault-finding ability • Positive attitude and willingness to learn new technologies • Ability to work effectively within a workshop team • Flexible and proactive approach to work Additional Information • Static, depot-based role • Occasional travel may be required for training purposes only • Full training provided in GPS Machine Control and HFR technology • Company equipment such as laptop and mobile phone provided where required
Apr 08, 2026
Full time
Digital / GPS / HFR Plant Fitter About Flannery Plant Hire: Flannery Plant Hire is a leading provider of operated and self-drive plant equipment, with a strong reputation for delivering high-quality, reliable machinery to the UK's largest infrastructure and construction projects. We are proud to be at the forefront of innovation and sustainability in plant hire, embracing the latest technology to support our clients and operators. Job Purpose: The Plant Fitter will be responsible for the servicing, maintenance, and calibration of digital systems installed on construction plant equipment, including GPS Machine Control systems and Human Form Recognition (HFR) safety technology. This is a static, depot-based role working on plant machinery within the company's workshop facilities. The role focuses on preparing machinery with the required digital technology before it is deployed to operational sites. This also includes the checking and verification of all off hired plant and reporting and resolving all defects to the site foreman. Full training will be provided to develop knowledge in machine control technology, plant electronics, and digital construction systems. Key Responsibilities Installation & System Integration • Install and configure GPS Machine Control systems on construction plant machinery including excavators, dozers, and graders. • Install and commission Human Form Recognition (HFR) safety systems designed to detect personnel around plant equipment. • Carry out sensor installation, GPS antenna mounting, wiring, and system configuration within the depot workshop. Service & Maintenance • Perform routine servicing, testing, and maintenance of machine control and HFR systems. • Diagnose and repair electrical, electronic, and mechanical faults relating to installed technology. • Ensure all equipment is functioning correctly prior to deployment. Calibration & System Checks • Calibrate sensors, machine control components, and system parameters to ensure accurate operation. • Conduct system testing and accuracy checks within the depot environment. Data Handling & Machine Setup • Upload machine control data including DTM files and digital terrain models where required. • Assist with system configuration and data preparation using office-based computer systems. Workshop Support • Work alongside workshop engineers to ensure machinery is fully prepared and compliant with operational requirements. • Assist with equipment preparation, upgrades, and system improvements. Qualifications & Experience • Experience working with construction plant, agricultural machinery, or heavy equipment. • Background as a mechanical technician, or workshop engineer is desirable. • Basic understanding of mechanical, electrical installations. • Comfortable working with computers and electronic equipment. • Full UK driving licence desirable. Key Skills & Attributes • Strong mechanical and technical aptitude • Attention to detail and accuracy • Problem-solving and fault-finding ability • Positive attitude and willingness to learn new technologies • Ability to work effectively within a workshop team • Flexible and proactive approach to work Additional Information • Static, depot-based role • Occasional travel may be required for training purposes only • Full training provided in GPS Machine Control and HFR technology • Company equipment such as laptop and mobile phone provided where required
Attachments Fitter Bridgewater Competitive Salary Fusion People are recruiting for an Attachments Fitter to join our client's growing attachments division. This is a hands-on role supporting the delivery, installation and maintenance of excavator attachments, ensuring a high standard of service to customers. Key Responsibilities: Deliver and install attachments on customer sites Attend breakdowns and carry out on-site repairs Adjust excavator flow and pressure settings to suit attachments (training provided) Carry out maintenance and repairs on hire fleet equipment Maintain a clean, safe and organised workshop and yard About You: Experience with hydraulic excavator attachments or construction equipment Good understanding of heavy plant machinery Full clean driving licence Strong communication skills and team-focused attitude Willingness to learn and work in a fast-paced environment Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.
Apr 08, 2026
Full time
Attachments Fitter Bridgewater Competitive Salary Fusion People are recruiting for an Attachments Fitter to join our client's growing attachments division. This is a hands-on role supporting the delivery, installation and maintenance of excavator attachments, ensuring a high standard of service to customers. Key Responsibilities: Deliver and install attachments on customer sites Attend breakdowns and carry out on-site repairs Adjust excavator flow and pressure settings to suit attachments (training provided) Carry out maintenance and repairs on hire fleet equipment Maintain a clean, safe and organised workshop and yard About You: Experience with hydraulic excavator attachments or construction equipment Good understanding of heavy plant machinery Full clean driving licence Strong communication skills and team-focused attitude Willingness to learn and work in a fast-paced environment Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website.
Digital / GPS / HFR Plant Fitter About Flannery Plant Hire: Flannery Plant Hire is a leading provider of operated and self drive plant equipment, with a strong reputation for delivering high quality, reliable machinery to the UK's largest infrastructure and construction projects. We are proud to be at the forefront of innovation and sustainability in plant hire, embracing the latest technology to support our clients and operators. Job Purpose The Plant Fitter will be responsible for the servicing, maintenance, and calibration of digital systems installed on construction plant equipment, including GPS Machine Control systems and Human Form Recognition (HFR) safety technology. This is a static, depot based role working on plant machinery within the company's workshop facilities. The role focuses on preparing machinery with the required digital technology before it is deployed to operational sites, including checking and verifying all off hired plant and reporting and resolving all defects to the site foreman. Full training will be provided to develop knowledge in machine control technology, plant electronics, and digital construction systems. Key Responsibilities Installation & System Integration Install and configure GPS Machine Control systems on construction plant machinery including excavators, dozers and graders. Install and commission Human Form Recognition (HFR) safety systems designed to detect personnel around plant equipment. Carry out sensor installation, GPS antenna mounting, wiring and system configuration within the depot workshop. Service & Maintenance Perform routine servicing, testing and maintenance of machine control and HFR systems. Diagnose and repair electrical, electronic and mechanical faults relating to installed technology. Ensure all equipment is functioning correctly prior to deployment. Calibration & System Checks Calibrate sensors, machine control components and system parameters to ensure accurate operation. Conduct system testing and accuracy checks within the depot environment. Data Handling & Machine Setup Upload machine control data including DTM files and digital terrain models where required. Assist with system configuration and data preparation using office based computer systems. Workshop Support Work alongside workshop engineers to ensure machinery is fully prepared and compliant with operational requirements. Assist with equipment preparation, upgrades and system improvements. Qualifications & Experience Experience working with construction plant, agricultural machinery or heavy equipment. Background as a mechanical technician or workshop engineer is desirable. Basic understanding of mechanical and electrical installations. Comfortable working with computers and electronic equipment. Full UK driving licence desirable. Key Skills & Attributes Strong mechanical and technical aptitude. Attention to detail and accuracy. Problem solving and fault finding ability. Positive attitude and willingness to learn new technologies. Ability to work effectively within a workshop team. Flexible and proactive approach to work. Additional Information Static, depot based role. Occasional travel may be required for training purposes only. Full training provided in GPS Machine Control and HFR technology. Company equipment such as laptop and mobile phone provided where required.
Apr 06, 2026
Full time
Digital / GPS / HFR Plant Fitter About Flannery Plant Hire: Flannery Plant Hire is a leading provider of operated and self drive plant equipment, with a strong reputation for delivering high quality, reliable machinery to the UK's largest infrastructure and construction projects. We are proud to be at the forefront of innovation and sustainability in plant hire, embracing the latest technology to support our clients and operators. Job Purpose The Plant Fitter will be responsible for the servicing, maintenance, and calibration of digital systems installed on construction plant equipment, including GPS Machine Control systems and Human Form Recognition (HFR) safety technology. This is a static, depot based role working on plant machinery within the company's workshop facilities. The role focuses on preparing machinery with the required digital technology before it is deployed to operational sites, including checking and verifying all off hired plant and reporting and resolving all defects to the site foreman. Full training will be provided to develop knowledge in machine control technology, plant electronics, and digital construction systems. Key Responsibilities Installation & System Integration Install and configure GPS Machine Control systems on construction plant machinery including excavators, dozers and graders. Install and commission Human Form Recognition (HFR) safety systems designed to detect personnel around plant equipment. Carry out sensor installation, GPS antenna mounting, wiring and system configuration within the depot workshop. Service & Maintenance Perform routine servicing, testing and maintenance of machine control and HFR systems. Diagnose and repair electrical, electronic and mechanical faults relating to installed technology. Ensure all equipment is functioning correctly prior to deployment. Calibration & System Checks Calibrate sensors, machine control components and system parameters to ensure accurate operation. Conduct system testing and accuracy checks within the depot environment. Data Handling & Machine Setup Upload machine control data including DTM files and digital terrain models where required. Assist with system configuration and data preparation using office based computer systems. Workshop Support Work alongside workshop engineers to ensure machinery is fully prepared and compliant with operational requirements. Assist with equipment preparation, upgrades and system improvements. Qualifications & Experience Experience working with construction plant, agricultural machinery or heavy equipment. Background as a mechanical technician or workshop engineer is desirable. Basic understanding of mechanical and electrical installations. Comfortable working with computers and electronic equipment. Full UK driving licence desirable. Key Skills & Attributes Strong mechanical and technical aptitude. Attention to detail and accuracy. Problem solving and fault finding ability. Positive attitude and willingness to learn new technologies. Ability to work effectively within a workshop team. Flexible and proactive approach to work. Additional Information Static, depot based role. Occasional travel may be required for training purposes only. Full training provided in GPS Machine Control and HFR technology. Company equipment such as laptop and mobile phone provided where required.
Jonathan Lee Recruitment
Newcastle Upon Tyne, Tyne And Wear
Vehicle Mechanic/ Mechanical Fitter/ Vehicle Technician - Defence Industry Location: Newcastle Salary: £32,000-£33,000 + Excellent Benefits Shift Pattern: 37 hrs over 4 days (Mon-Thu), starting at 8am Secure your future. Support national defence. Work with cutting-edge military technology. Take the next step in your engineering career with a rapidly growing UK Defence organisation offering long-term stability, outstanding benefits, and the opportunity to work on some of the world's most advanced military vehicles. Whether you're ex-forces, dealership-trained, or experienced in HGV/PSV, plant, or agricultural machinery-this is your chance to join a team where your skills truly matter. The ideal candidate will be an experienced Vehicle Mechanic, Vehicle Technician, Mechanical Fitter, HGV/PSV Technician, or Defence/Military Vehicle Fitter, bringing strong hands-on mechanical and diagnostic skills, attention to detail, and the ability to work reliably within a fast-paced defence engineering environment. Why Join? Enhanced overtime rates All tools, equipment, and PPE provided Generous holiday allowance Matched contribution pension with life assurance Aviva DigiCare+ access - Digital GP, annual health checks, nutritional consultations Employee savings and discount portal 10' days leave for Armed Forces Reservists Holiday Trading Scheme (buy/sell annual leave) Secure, well-equipped defence engineering facility Real career development and internal progression What You'll Do You'll play a key role in maintaining and supporting both UK MOD and international tracked and wheeled tactical military vehicles-work that directly contributes to national defence and operational readiness. The key responsibilities are: Carry out servicing, maintenance, diagnostics, and repairs on military vehicles and associated electrical systems Interpret and work from technical drawings, engineering process plans, and customer specifications Complete accurate documentation, test certificates, and maintenance reports Conduct equipment inspections to meet production, safety, and quality standards Use workshop tools correctly and report any defects or material issues Collaborate with a dedicated engineering team focused on precision, safety, and mission success What You'll Bring City & Guilds / NVQ Level 3 in Light or Heavy Vehicle Maintenance & Repair Proven hands-on experience in a similar mechanical role - Ideal backgrounds: ex-forces, HGV/PSV, commercial dealerships, plant, agricultural machinery Strong understanding of hydraulics, mechanics, and vehicle diagnostics A team-focused mindset with good communication skills Ability to obtain Security Check (SC) clearance (requires no criminal convictions + 5 years UK residency) A targeted medical assessment may be required as part of the onboarding process. If you're an experienced NVQ Level 3 Vehicle Mechanic, Technician, Tank Fitter, HGV/PSV Technician, Commercial Mechanic, or Mechanical Fitter-and you want a career with real purpose-this is a rare opportunity to join a forward-thinking defence company that will invest in your future. Apply Now and Step into a secure, rewarding, future-proof engineering role where your expertise keeps the UK moving, protected, and mission-ready. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Apr 01, 2026
Full time
Vehicle Mechanic/ Mechanical Fitter/ Vehicle Technician - Defence Industry Location: Newcastle Salary: £32,000-£33,000 + Excellent Benefits Shift Pattern: 37 hrs over 4 days (Mon-Thu), starting at 8am Secure your future. Support national defence. Work with cutting-edge military technology. Take the next step in your engineering career with a rapidly growing UK Defence organisation offering long-term stability, outstanding benefits, and the opportunity to work on some of the world's most advanced military vehicles. Whether you're ex-forces, dealership-trained, or experienced in HGV/PSV, plant, or agricultural machinery-this is your chance to join a team where your skills truly matter. The ideal candidate will be an experienced Vehicle Mechanic, Vehicle Technician, Mechanical Fitter, HGV/PSV Technician, or Defence/Military Vehicle Fitter, bringing strong hands-on mechanical and diagnostic skills, attention to detail, and the ability to work reliably within a fast-paced defence engineering environment. Why Join? Enhanced overtime rates All tools, equipment, and PPE provided Generous holiday allowance Matched contribution pension with life assurance Aviva DigiCare+ access - Digital GP, annual health checks, nutritional consultations Employee savings and discount portal 10' days leave for Armed Forces Reservists Holiday Trading Scheme (buy/sell annual leave) Secure, well-equipped defence engineering facility Real career development and internal progression What You'll Do You'll play a key role in maintaining and supporting both UK MOD and international tracked and wheeled tactical military vehicles-work that directly contributes to national defence and operational readiness. The key responsibilities are: Carry out servicing, maintenance, diagnostics, and repairs on military vehicles and associated electrical systems Interpret and work from technical drawings, engineering process plans, and customer specifications Complete accurate documentation, test certificates, and maintenance reports Conduct equipment inspections to meet production, safety, and quality standards Use workshop tools correctly and report any defects or material issues Collaborate with a dedicated engineering team focused on precision, safety, and mission success What You'll Bring City & Guilds / NVQ Level 3 in Light or Heavy Vehicle Maintenance & Repair Proven hands-on experience in a similar mechanical role - Ideal backgrounds: ex-forces, HGV/PSV, commercial dealerships, plant, agricultural machinery Strong understanding of hydraulics, mechanics, and vehicle diagnostics A team-focused mindset with good communication skills Ability to obtain Security Check (SC) clearance (requires no criminal convictions + 5 years UK residency) A targeted medical assessment may be required as part of the onboarding process. If you're an experienced NVQ Level 3 Vehicle Mechanic, Technician, Tank Fitter, HGV/PSV Technician, Commercial Mechanic, or Mechanical Fitter-and you want a career with real purpose-this is a rare opportunity to join a forward-thinking defence company that will invest in your future. Apply Now and Step into a secure, rewarding, future-proof engineering role where your expertise keeps the UK moving, protected, and mission-ready. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Vehicle Mechanic/ Mechanical Fitter/ Vehicle Technician - Defence Industry Location: Sennybridge Salary: £32,000-£33,000 + Excellent Benefits Shift Pattern: 37 hrs over 4 days (Mon-Thu), starting at 8am Secure your future. Support national defence. Work with cutting-edge military technology. Take the next step in your engineering career with a rapidly growing UK Defence organisation offering long-term stability, outstanding benefits, and the opportunity to work on some of the world's most advanced military vehicles. Whether you're ex-forces, dealership-trained, or experienced in HGV/PSV, plant, or agricultural machinery-this is your chance to join a team where your skills truly matter. The ideal candidate will be an experienced Vehicle Mechanic, Vehicle Technician, Mechanical Fitter, HGV/PSV Technician, or Defence/Military Vehicle Fitter, bringing strong hands-on mechanical and diagnostic skills, attention to detail, and the ability to work reliably within a fast-paced defence engineering environment. Why Join? Enhanced overtime rates All tools, equipment, and PPE provided Generous holiday allowance Matched contribution pension with life assurance Aviva DigiCare+ access - Digital GP, annual health checks, nutritional consultations Employee savings and discount portal 10' days leave for Armed Forces Reservists Holiday Trading Scheme (buy/sell annual leave) Secure, well-equipped defence engineering facility Real career development and internal progression What You'll Do You'll play a key role in maintaining and supporting both UK MOD and international tracked and wheeled tactical military vehicles-work that directly contributes to national defence and operational readiness. The key responsibilities are: Carry out servicing, maintenance, diagnostics, and repairs on military vehicles and associated electrical systems Interpret and work from technical drawings, engineering process plans, and customer specifications Complete accurate documentation, test certificates, and maintenance reports Conduct equipment inspections to meet production, safety, and quality standards Use workshop tools correctly and report any defects or material issues Collaborate with a dedicated engineering team focused on precision, safety, and mission success What You'll Bring City & Guilds / NVQ Level 3 in Light or Heavy Vehicle Maintenance & Repair Proven hands-on experience in a similar mechanical role - Ideal backgrounds: ex-forces, HGV/PSV, commercial dealerships, plant, agricultural machinery Strong understanding of hydraulics, mechanics, and vehicle diagnostics A team-focused mindset with good communication skills Ability to obtain Security Check (SC) clearance (requires no criminal convictions + 5 years UK residency) A targeted medical assessment may be required as part of the onboarding process. If you're an experienced NVQ Level 3 Vehicle Mechanic, Technician, Tank Fitter, HGV/PSV Technician, Commercial Mechanic, or Mechanical Fitter-and you want a career with real purpose-this is a rare opportunity to join a forward-thinking defence company that will invest in your future. Apply Now and Step into a secure, rewarding, future-proof engineering role where your expertise keeps the UK moving, protected, and mission-ready. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Apr 01, 2026
Full time
Vehicle Mechanic/ Mechanical Fitter/ Vehicle Technician - Defence Industry Location: Sennybridge Salary: £32,000-£33,000 + Excellent Benefits Shift Pattern: 37 hrs over 4 days (Mon-Thu), starting at 8am Secure your future. Support national defence. Work with cutting-edge military technology. Take the next step in your engineering career with a rapidly growing UK Defence organisation offering long-term stability, outstanding benefits, and the opportunity to work on some of the world's most advanced military vehicles. Whether you're ex-forces, dealership-trained, or experienced in HGV/PSV, plant, or agricultural machinery-this is your chance to join a team where your skills truly matter. The ideal candidate will be an experienced Vehicle Mechanic, Vehicle Technician, Mechanical Fitter, HGV/PSV Technician, or Defence/Military Vehicle Fitter, bringing strong hands-on mechanical and diagnostic skills, attention to detail, and the ability to work reliably within a fast-paced defence engineering environment. Why Join? Enhanced overtime rates All tools, equipment, and PPE provided Generous holiday allowance Matched contribution pension with life assurance Aviva DigiCare+ access - Digital GP, annual health checks, nutritional consultations Employee savings and discount portal 10' days leave for Armed Forces Reservists Holiday Trading Scheme (buy/sell annual leave) Secure, well-equipped defence engineering facility Real career development and internal progression What You'll Do You'll play a key role in maintaining and supporting both UK MOD and international tracked and wheeled tactical military vehicles-work that directly contributes to national defence and operational readiness. The key responsibilities are: Carry out servicing, maintenance, diagnostics, and repairs on military vehicles and associated electrical systems Interpret and work from technical drawings, engineering process plans, and customer specifications Complete accurate documentation, test certificates, and maintenance reports Conduct equipment inspections to meet production, safety, and quality standards Use workshop tools correctly and report any defects or material issues Collaborate with a dedicated engineering team focused on precision, safety, and mission success What You'll Bring City & Guilds / NVQ Level 3 in Light or Heavy Vehicle Maintenance & Repair Proven hands-on experience in a similar mechanical role - Ideal backgrounds: ex-forces, HGV/PSV, commercial dealerships, plant, agricultural machinery Strong understanding of hydraulics, mechanics, and vehicle diagnostics A team-focused mindset with good communication skills Ability to obtain Security Check (SC) clearance (requires no criminal convictions + 5 years UK residency) A targeted medical assessment may be required as part of the onboarding process. If you're an experienced NVQ Level 3 Vehicle Mechanic, Technician, Tank Fitter, HGV/PSV Technician, Commercial Mechanic, or Mechanical Fitter-and you want a career with real purpose-this is a rare opportunity to join a forward-thinking defence company that will invest in your future. Apply Now and Step into a secure, rewarding, future-proof engineering role where your expertise keeps the UK moving, protected, and mission-ready. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Vehicle Mechanic/ Mechanical Fitter/ Vehicle Technician - Defence Industry Location: Bovington Salary: £32,000-£33,000 + Excellent Benefits + £3,000 joining bonus Shift Pattern: 37 hrs over 4 days (Mon-Thu), starting at 8am Secure your future. Support national defence. Work with cutting-edge military technology. Take the next step in your engineering career with a rapidly growing UK Defence organisation offering long-term stability, outstanding benefits, and the opportunity to work on some of the world's most advanced military vehicles. Whether you're ex-forces, dealership-trained, or experienced in HGV/PSV, plant, or agricultural machinery-this is your chance to join a team where your skills truly matter. The ideal candidate will be an experienced Vehicle Mechanic, Vehicle Technician, Mechanical Fitter, HGV/PSV Technician, or Defence/Military Vehicle Fitter, bringing strong hands-on mechanical and diagnostic skills, attention to detail, and the ability to work reliably within a fast-paced defence engineering environment. Why Join? Enhanced overtime rates All tools, equipment, and PPE provided Generous holiday allowance Matched contribution pension with life assurance Aviva DigiCare+ access - Digital GP, annual health checks, nutritional consultations Employee savings and discount portal 10' days leave for Armed Forces Reservists Holiday Trading Scheme (buy/sell annual leave) Secure, well-equipped defence engineering facility Real career development and internal progression What You'll Do You'll play a key role in maintaining and supporting both UK MOD and international tracked and wheeled tactical military vehicles-work that directly contributes to national defence and operational readiness. The key responsibilities are: Carry out servicing, maintenance, diagnostics, and repairs on military vehicles and associated electrical systems Interpret and work from technical drawings, engineering process plans, and customer specifications Complete accurate documentation, test certificates, and maintenance reports Conduct equipment inspections to meet production, safety, and quality standards Use workshop tools correctly and report any defects or material issues Collaborate with a dedicated engineering team focused on precision, safety, and mission success What You'll Bring City & Guilds / NVQ Level 3 in Light or Heavy Vehicle Maintenance & Repair Proven hands-on experience in a similar mechanical role - Ideal backgrounds: ex-forces, HGV/PSV, commercial dealerships, plant, agricultural machinery Strong understanding of hydraulics, mechanics, and vehicle diagnostics A team-focused mindset with good communication skills Ability to obtain Security Check (SC) clearance (requires no criminal convictions + 5 years UK residency) A targeted medical assessment may be required as part of the onboarding process. If you're an experienced NVQ Level 3 Vehicle Mechanic, Technician, Tank Fitter, HGV/PSV Technician, Commercial Mechanic, or Mechanical Fitter-and you want a career with real purpose-this is a rare opportunity to join a forward-thinking defence company that will invest in your future. Apply Now and Step into a secure, rewarding, future-proof engineering role where your expertise keeps the UK moving, protected, and mission-ready. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Apr 01, 2026
Full time
Vehicle Mechanic/ Mechanical Fitter/ Vehicle Technician - Defence Industry Location: Bovington Salary: £32,000-£33,000 + Excellent Benefits + £3,000 joining bonus Shift Pattern: 37 hrs over 4 days (Mon-Thu), starting at 8am Secure your future. Support national defence. Work with cutting-edge military technology. Take the next step in your engineering career with a rapidly growing UK Defence organisation offering long-term stability, outstanding benefits, and the opportunity to work on some of the world's most advanced military vehicles. Whether you're ex-forces, dealership-trained, or experienced in HGV/PSV, plant, or agricultural machinery-this is your chance to join a team where your skills truly matter. The ideal candidate will be an experienced Vehicle Mechanic, Vehicle Technician, Mechanical Fitter, HGV/PSV Technician, or Defence/Military Vehicle Fitter, bringing strong hands-on mechanical and diagnostic skills, attention to detail, and the ability to work reliably within a fast-paced defence engineering environment. Why Join? Enhanced overtime rates All tools, equipment, and PPE provided Generous holiday allowance Matched contribution pension with life assurance Aviva DigiCare+ access - Digital GP, annual health checks, nutritional consultations Employee savings and discount portal 10' days leave for Armed Forces Reservists Holiday Trading Scheme (buy/sell annual leave) Secure, well-equipped defence engineering facility Real career development and internal progression What You'll Do You'll play a key role in maintaining and supporting both UK MOD and international tracked and wheeled tactical military vehicles-work that directly contributes to national defence and operational readiness. The key responsibilities are: Carry out servicing, maintenance, diagnostics, and repairs on military vehicles and associated electrical systems Interpret and work from technical drawings, engineering process plans, and customer specifications Complete accurate documentation, test certificates, and maintenance reports Conduct equipment inspections to meet production, safety, and quality standards Use workshop tools correctly and report any defects or material issues Collaborate with a dedicated engineering team focused on precision, safety, and mission success What You'll Bring City & Guilds / NVQ Level 3 in Light or Heavy Vehicle Maintenance & Repair Proven hands-on experience in a similar mechanical role - Ideal backgrounds: ex-forces, HGV/PSV, commercial dealerships, plant, agricultural machinery Strong understanding of hydraulics, mechanics, and vehicle diagnostics A team-focused mindset with good communication skills Ability to obtain Security Check (SC) clearance (requires no criminal convictions + 5 years UK residency) A targeted medical assessment may be required as part of the onboarding process. If you're an experienced NVQ Level 3 Vehicle Mechanic, Technician, Tank Fitter, HGV/PSV Technician, Commercial Mechanic, or Mechanical Fitter-and you want a career with real purpose-this is a rare opportunity to join a forward-thinking defence company that will invest in your future. Apply Now and Step into a secure, rewarding, future-proof engineering role where your expertise keeps the UK moving, protected, and mission-ready. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Jonathan Lee Recruitment
Beverley, North Humberside
Vehicle Mechanic/ Mechanical Fitter/ Vehicle Technician - Defence Industry Location: Leconfield Salary: £32,000-£33,000 + Excellent Benefits Shift Pattern: 37 hrs, Working Mon-Thu 8am to 4:30pm and Fri 8am to 1pm Secure your future. Support national defence. Work with cutting-edge military technology. Take the next step in your engineering career with a rapidly growing UK Defence organisation offering long-term stability, outstanding benefits, and the opportunity to work on some of the world's most advanced military vehicles. Whether you're ex-forces, dealership-trained, or experienced in HGV/PSV, plant, or agricultural machinery-this is your chance to join a team where your skills truly matter. The ideal candidate will be an experienced Vehicle Mechanic, Vehicle Technician, Mechanical Fitter, HGV/PSV Technician, or Defence/Military Vehicle Fitter, bringing strong hands-on mechanical and diagnostic skills, attention to detail, and the ability to work reliably within a fast-paced defence engineering environment. Why Join? Enhanced overtime rates All tools, equipment, and PPE provided Generous holiday allowance Matched contribution pension with life assurance Aviva DigiCare+ access - Digital GP, annual health checks, nutritional consultations Employee savings and discount portal 10' days leave for Armed Forces Reservists Holiday Trading Scheme (buy/sell annual leave) Secure, well-equipped defence engineering facility Real career development and internal progression What You'll Do You'll play a key role in maintaining and supporting both UK MOD and international tracked and wheeled tactical military vehicles-work that directly contributes to national defence and operational readiness. The key responsibilities are: Carry out servicing, maintenance, diagnostics, and repairs on military vehicles and associated electrical systems Interpret and work from technical drawings, engineering process plans, and customer specifications Complete accurate documentation, test certificates, and maintenance reports Conduct equipment inspections to meet production, safety, and quality standards Use workshop tools correctly and report any defects or material issues Collaborate with a dedicated engineering team focused on precision, safety, and mission success What You'll Bring City & Guilds / NVQ Level 3 in Light or Heavy Vehicle Maintenance & Repair Proven hands-on experience in a similar mechanical role - Ideal backgrounds: ex-forces, HGV/PSV, commercial dealerships, plant, agricultural machinery Strong understanding of hydraulics, mechanics, and vehicle diagnostics A team-focused mindset with good communication skills Ability to obtain Security Check (SC) clearance (requires no criminal convictions + 5 years UK residency) A targeted medical assessment may be required as part of the onboarding process. If you're an experienced NVQ Level 3 Vehicle Mechanic, Technician, Tank Fitter, HGV/PSV Technician, Commercial Mechanic, or Mechanical Fitter-and you want a career with real purpose-this is a rare opportunity to join a forward-thinking defence company that will invest in your future. Apply Now and Step into a secure, rewarding, future-proof engineering role where your expertise keeps the UK moving, protected, and mission-ready. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Apr 01, 2026
Full time
Vehicle Mechanic/ Mechanical Fitter/ Vehicle Technician - Defence Industry Location: Leconfield Salary: £32,000-£33,000 + Excellent Benefits Shift Pattern: 37 hrs, Working Mon-Thu 8am to 4:30pm and Fri 8am to 1pm Secure your future. Support national defence. Work with cutting-edge military technology. Take the next step in your engineering career with a rapidly growing UK Defence organisation offering long-term stability, outstanding benefits, and the opportunity to work on some of the world's most advanced military vehicles. Whether you're ex-forces, dealership-trained, or experienced in HGV/PSV, plant, or agricultural machinery-this is your chance to join a team where your skills truly matter. The ideal candidate will be an experienced Vehicle Mechanic, Vehicle Technician, Mechanical Fitter, HGV/PSV Technician, or Defence/Military Vehicle Fitter, bringing strong hands-on mechanical and diagnostic skills, attention to detail, and the ability to work reliably within a fast-paced defence engineering environment. Why Join? Enhanced overtime rates All tools, equipment, and PPE provided Generous holiday allowance Matched contribution pension with life assurance Aviva DigiCare+ access - Digital GP, annual health checks, nutritional consultations Employee savings and discount portal 10' days leave for Armed Forces Reservists Holiday Trading Scheme (buy/sell annual leave) Secure, well-equipped defence engineering facility Real career development and internal progression What You'll Do You'll play a key role in maintaining and supporting both UK MOD and international tracked and wheeled tactical military vehicles-work that directly contributes to national defence and operational readiness. The key responsibilities are: Carry out servicing, maintenance, diagnostics, and repairs on military vehicles and associated electrical systems Interpret and work from technical drawings, engineering process plans, and customer specifications Complete accurate documentation, test certificates, and maintenance reports Conduct equipment inspections to meet production, safety, and quality standards Use workshop tools correctly and report any defects or material issues Collaborate with a dedicated engineering team focused on precision, safety, and mission success What You'll Bring City & Guilds / NVQ Level 3 in Light or Heavy Vehicle Maintenance & Repair Proven hands-on experience in a similar mechanical role - Ideal backgrounds: ex-forces, HGV/PSV, commercial dealerships, plant, agricultural machinery Strong understanding of hydraulics, mechanics, and vehicle diagnostics A team-focused mindset with good communication skills Ability to obtain Security Check (SC) clearance (requires no criminal convictions + 5 years UK residency) A targeted medical assessment may be required as part of the onboarding process. If you're an experienced NVQ Level 3 Vehicle Mechanic, Technician, Tank Fitter, HGV/PSV Technician, Commercial Mechanic, or Mechanical Fitter-and you want a career with real purpose-this is a rare opportunity to join a forward-thinking defence company that will invest in your future. Apply Now and Step into a secure, rewarding, future-proof engineering role where your expertise keeps the UK moving, protected, and mission-ready. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Jonathan Lee Recruitment
Tewkesbury, Gloucestershire
Vehicle Mechanic/ Mechanical Fitter/ Vehicle Technician - Defence Industry Location: Ashchurch Salary: £32,000-£33,000 + Excellent Benefits Shift Pattern: 37 hrs, Working Mon-Thu 8am to 4:30pm and Fri 8am to 1pm Secure your future. Support national defence. Work with cutting-edge military technology. Take the next step in your engineering career with a rapidly growing UK Defence organisation offering long-term stability, outstanding benefits, and the opportunity to work on some of the world's most advanced military vehicles. Whether you're ex-forces, dealership-trained, or experienced in HGV/PSV, plant, or agricultural machinery-this is your chance to join a team where your skills truly matter. The ideal candidate will be an experienced Vehicle Mechanic, Vehicle Technician, Mechanical Fitter, HGV/PSV Technician, or Defence/Military Vehicle Fitter, bringing strong hands-on mechanical and diagnostic skills, attention to detail, and the ability to work reliably within a fast-paced defence engineering environment. Why Join? Enhanced overtime rates All tools, equipment, and PPE provided Generous holiday allowance Matched contribution pension with life assurance Aviva DigiCare+ access - Digital GP, annual health checks, nutritional consultations Employee savings and discount portal 10' days leave for Armed Forces Reservists Holiday Trading Scheme (buy/sell annual leave) Secure, well-equipped defence engineering facility Real career development and internal progression What You'll Do You'll play a key role in maintaining and supporting both UK MOD and international tracked and wheeled tactical military vehicles-work that directly contributes to national defence and operational readiness. The key responsibilities are: Carry out servicing, maintenance, diagnostics, and repairs on military vehicles and associated electrical systems Interpret and work from technical drawings, engineering process plans, and customer specifications Complete accurate documentation, test certificates, and maintenance reports Conduct equipment inspections to meet production, safety, and quality standards Use workshop tools correctly and report any defects or material issues Collaborate with a dedicated engineering team focused on precision, safety, and mission success What You'll Bring City & Guilds / NVQ Level 3 in Light or Heavy Vehicle Maintenance & Repair Proven hands-on experience in a similar mechanical role - Ideal backgrounds: ex-forces, HGV/PSV, commercial dealerships, plant, agricultural machinery Strong understanding of hydraulics, mechanics, and vehicle diagnostics A team-focused mindset with good communication skills Ability to obtain Security Check (SC) clearance (requires no criminal convictions + 5 years UK residency) A targeted medical assessment may be required as part of the onboarding process. If you're an experienced NVQ Level 3 Vehicle Mechanic, Technician, Tank Fitter, HGV/PSV Technician, Commercial Mechanic, or Mechanical Fitter-and you want a career with real purpose-this is a rare opportunity to join a forward-thinking defence company that will invest in your future. Apply Now and Step into a secure, rewarding, future-proof engineering role where your expertise keeps the UK moving, protected, and mission-ready. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Apr 01, 2026
Full time
Vehicle Mechanic/ Mechanical Fitter/ Vehicle Technician - Defence Industry Location: Ashchurch Salary: £32,000-£33,000 + Excellent Benefits Shift Pattern: 37 hrs, Working Mon-Thu 8am to 4:30pm and Fri 8am to 1pm Secure your future. Support national defence. Work with cutting-edge military technology. Take the next step in your engineering career with a rapidly growing UK Defence organisation offering long-term stability, outstanding benefits, and the opportunity to work on some of the world's most advanced military vehicles. Whether you're ex-forces, dealership-trained, or experienced in HGV/PSV, plant, or agricultural machinery-this is your chance to join a team where your skills truly matter. The ideal candidate will be an experienced Vehicle Mechanic, Vehicle Technician, Mechanical Fitter, HGV/PSV Technician, or Defence/Military Vehicle Fitter, bringing strong hands-on mechanical and diagnostic skills, attention to detail, and the ability to work reliably within a fast-paced defence engineering environment. Why Join? Enhanced overtime rates All tools, equipment, and PPE provided Generous holiday allowance Matched contribution pension with life assurance Aviva DigiCare+ access - Digital GP, annual health checks, nutritional consultations Employee savings and discount portal 10' days leave for Armed Forces Reservists Holiday Trading Scheme (buy/sell annual leave) Secure, well-equipped defence engineering facility Real career development and internal progression What You'll Do You'll play a key role in maintaining and supporting both UK MOD and international tracked and wheeled tactical military vehicles-work that directly contributes to national defence and operational readiness. The key responsibilities are: Carry out servicing, maintenance, diagnostics, and repairs on military vehicles and associated electrical systems Interpret and work from technical drawings, engineering process plans, and customer specifications Complete accurate documentation, test certificates, and maintenance reports Conduct equipment inspections to meet production, safety, and quality standards Use workshop tools correctly and report any defects or material issues Collaborate with a dedicated engineering team focused on precision, safety, and mission success What You'll Bring City & Guilds / NVQ Level 3 in Light or Heavy Vehicle Maintenance & Repair Proven hands-on experience in a similar mechanical role - Ideal backgrounds: ex-forces, HGV/PSV, commercial dealerships, plant, agricultural machinery Strong understanding of hydraulics, mechanics, and vehicle diagnostics A team-focused mindset with good communication skills Ability to obtain Security Check (SC) clearance (requires no criminal convictions + 5 years UK residency) A targeted medical assessment may be required as part of the onboarding process. If you're an experienced NVQ Level 3 Vehicle Mechanic, Technician, Tank Fitter, HGV/PSV Technician, Commercial Mechanic, or Mechanical Fitter-and you want a career with real purpose-this is a rare opportunity to join a forward-thinking defence company that will invest in your future. Apply Now and Step into a secure, rewarding, future-proof engineering role where your expertise keeps the UK moving, protected, and mission-ready. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Vehicle Mechanic/ Mechanical Fitter/ Vehicle Technician - Defence Industry Location: Leuchars Salary: £32,000-£33,000 + Excellent Benefits Shift Pattern: 37 hrs, Working Mon-Thu 8am to 4:30pm and Fri 8am to 1pm Secure your future. Support national defence. Work with cutting-edge military technology. Take the next step in your engineering career with a rapidly growing UK Defence organisation offering long-term stability, outstanding benefits, and the opportunity to work on some of the world's most advanced military vehicles. Whether you're ex-forces, dealership-trained, or experienced in HGV/PSV, plant, or agricultural machinery-this is your chance to join a team where your skills truly matter. The ideal candidate will be an experienced Vehicle Mechanic, Vehicle Technician, Mechanical Fitter, HGV/PSV Technician, or Defence/Military Vehicle Fitter, bringing strong hands-on mechanical and diagnostic skills, attention to detail, and the ability to work reliably within a fast-paced defence engineering environment. Why Join? Enhanced overtime rates All tools, equipment, and PPE provided Generous holiday allowance Matched contribution pension with life assurance Aviva DigiCare+ access - Digital GP, annual health checks, nutritional consultations Employee savings and discount portal 10' days leave for Armed Forces Reservists Holiday Trading Scheme (buy/sell annual leave) Secure, well-equipped defence engineering facility Real career development and internal progression What You'll Do You'll play a key role in maintaining and supporting both UK MOD and international tracked and wheeled tactical military vehicles-work that directly contributes to national defence and operational readiness. The key responsibilities are: Carry out servicing, maintenance, diagnostics, and repairs on military vehicles and associated electrical systems Interpret and work from technical drawings, engineering process plans, and customer specifications Complete accurate documentation, test certificates, and maintenance reports Conduct equipment inspections to meet production, safety, and quality standards Use workshop tools correctly and report any defects or material issues Collaborate with a dedicated engineering team focused on precision, safety, and mission success What You'll Bring City & Guilds / NVQ Level 3 in Light or Heavy Vehicle Maintenance & Repair Proven hands-on experience in a similar mechanical role - Ideal backgrounds: ex-forces, HGV/PSV, commercial dealerships, plant, agricultural machinery Strong understanding of hydraulics, mechanics, and vehicle diagnostics A team-focused mindset with good communication skills Ability to obtain Security Check (SC) clearance (requires no criminal convictions + 5 years UK residency) A targeted medical assessment may be required as part of the onboarding process. If you're an experienced NVQ Level 3 Vehicle Mechanic, Technician, Tank Fitter, HGV/PSV Technician, Commercial Mechanic, or Mechanical Fitter-and you want a career with real purpose-this is a rare opportunity to join a forward-thinking defence company that will invest in your future. Apply Now and Step into a secure, rewarding, future-proof engineering role where your expertise keeps the UK moving, protected, and mission-ready. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Apr 01, 2026
Full time
Vehicle Mechanic/ Mechanical Fitter/ Vehicle Technician - Defence Industry Location: Leuchars Salary: £32,000-£33,000 + Excellent Benefits Shift Pattern: 37 hrs, Working Mon-Thu 8am to 4:30pm and Fri 8am to 1pm Secure your future. Support national defence. Work with cutting-edge military technology. Take the next step in your engineering career with a rapidly growing UK Defence organisation offering long-term stability, outstanding benefits, and the opportunity to work on some of the world's most advanced military vehicles. Whether you're ex-forces, dealership-trained, or experienced in HGV/PSV, plant, or agricultural machinery-this is your chance to join a team where your skills truly matter. The ideal candidate will be an experienced Vehicle Mechanic, Vehicle Technician, Mechanical Fitter, HGV/PSV Technician, or Defence/Military Vehicle Fitter, bringing strong hands-on mechanical and diagnostic skills, attention to detail, and the ability to work reliably within a fast-paced defence engineering environment. Why Join? Enhanced overtime rates All tools, equipment, and PPE provided Generous holiday allowance Matched contribution pension with life assurance Aviva DigiCare+ access - Digital GP, annual health checks, nutritional consultations Employee savings and discount portal 10' days leave for Armed Forces Reservists Holiday Trading Scheme (buy/sell annual leave) Secure, well-equipped defence engineering facility Real career development and internal progression What You'll Do You'll play a key role in maintaining and supporting both UK MOD and international tracked and wheeled tactical military vehicles-work that directly contributes to national defence and operational readiness. The key responsibilities are: Carry out servicing, maintenance, diagnostics, and repairs on military vehicles and associated electrical systems Interpret and work from technical drawings, engineering process plans, and customer specifications Complete accurate documentation, test certificates, and maintenance reports Conduct equipment inspections to meet production, safety, and quality standards Use workshop tools correctly and report any defects or material issues Collaborate with a dedicated engineering team focused on precision, safety, and mission success What You'll Bring City & Guilds / NVQ Level 3 in Light or Heavy Vehicle Maintenance & Repair Proven hands-on experience in a similar mechanical role - Ideal backgrounds: ex-forces, HGV/PSV, commercial dealerships, plant, agricultural machinery Strong understanding of hydraulics, mechanics, and vehicle diagnostics A team-focused mindset with good communication skills Ability to obtain Security Check (SC) clearance (requires no criminal convictions + 5 years UK residency) A targeted medical assessment may be required as part of the onboarding process. If you're an experienced NVQ Level 3 Vehicle Mechanic, Technician, Tank Fitter, HGV/PSV Technician, Commercial Mechanic, or Mechanical Fitter-and you want a career with real purpose-this is a rare opportunity to join a forward-thinking defence company that will invest in your future. Apply Now and Step into a secure, rewarding, future-proof engineering role where your expertise keeps the UK moving, protected, and mission-ready. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Vehicle Mechanic/ Mechanical Fitter/ Vehicle Technician - Defence Industry Location: Donnington Salary: £32,000-£33,000 + Excellent Benefits Shift Pattern: 37 hrs, Working 5 days week 1, and 4-days week 2 (every other Friday off) Secure your future. Support national defence. Work with cutting-edge military technology. Take the next step in your engineering career with a rapidly growing UK Defence organisation offering long-term stability, outstanding benefits, and the opportunity to work on some of the world's most advanced military vehicles. Whether you're ex-forces, dealership-trained, or experienced in HGV/PSV, plant, or agricultural machinery-this is your chance to join a team where your skills truly matter. The ideal candidate will be an experienced Vehicle Mechanic, Vehicle Technician, Mechanical Fitter, HGV/PSV Technician, or Defence/Military Vehicle Fitter, bringing strong hands-on mechanical and diagnostic skills, attention to detail, and the ability to work reliably within a fast-paced defence engineering environment. Why Join? Enhanced overtime rates All tools, equipment, and PPE provided Generous holiday allowance Matched contribution pension with life assurance Aviva DigiCare+ access - Digital GP, annual health checks, nutritional consultations Employee savings and discount portal 10' days leave for Armed Forces Reservists Holiday Trading Scheme (buy/sell annual leave) Secure, well-equipped defence engineering facility Real career development and internal progression What You'll Do You'll play a key role in maintaining and supporting both UK MOD and international tracked and wheeled tactical military vehicles-work that directly contributes to national defence and operational readiness. The key responsibilities are: Carry out servicing, maintenance, diagnostics, and repairs on military vehicles and associated electrical systems Interpret and work from technical drawings, engineering process plans, and customer specifications Complete accurate documentation, test certificates, and maintenance reports Conduct equipment inspections to meet production, safety, and quality standards Use workshop tools correctly and report any defects or material issues Collaborate with a dedicated engineering team focused on precision, safety, and mission success What You'll Bring City & Guilds / NVQ Level 3 in Light or Heavy Vehicle Maintenance & Repair Proven hands-on experience in a similar mechanical role - Ideal backgrounds: ex-forces, HGV/PSV, commercial dealerships, plant, agricultural machinery Strong understanding of hydraulics, mechanics, and vehicle diagnostics A team-focused mindset with good communication skills Ability to obtain Security Check (SC) clearance (requires no criminal convictions + 5 years UK residency) A targeted medical assessment may be required as part of the onboarding process. If you're an experienced NVQ Level 3 Vehicle Mechanic, Technician, Tank Fitter, HGV/PSV Technician, Commercial Mechanic, or Mechanical Fitter-and you want a career with real purpose-this is a rare opportunity to join a forward-thinking defence company that will invest in your future. Apply Now and Step into a secure, rewarding, future-proof engineering role where your expertise keeps the UK moving, protected, and mission-ready. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Apr 01, 2026
Full time
Vehicle Mechanic/ Mechanical Fitter/ Vehicle Technician - Defence Industry Location: Donnington Salary: £32,000-£33,000 + Excellent Benefits Shift Pattern: 37 hrs, Working 5 days week 1, and 4-days week 2 (every other Friday off) Secure your future. Support national defence. Work with cutting-edge military technology. Take the next step in your engineering career with a rapidly growing UK Defence organisation offering long-term stability, outstanding benefits, and the opportunity to work on some of the world's most advanced military vehicles. Whether you're ex-forces, dealership-trained, or experienced in HGV/PSV, plant, or agricultural machinery-this is your chance to join a team where your skills truly matter. The ideal candidate will be an experienced Vehicle Mechanic, Vehicle Technician, Mechanical Fitter, HGV/PSV Technician, or Defence/Military Vehicle Fitter, bringing strong hands-on mechanical and diagnostic skills, attention to detail, and the ability to work reliably within a fast-paced defence engineering environment. Why Join? Enhanced overtime rates All tools, equipment, and PPE provided Generous holiday allowance Matched contribution pension with life assurance Aviva DigiCare+ access - Digital GP, annual health checks, nutritional consultations Employee savings and discount portal 10' days leave for Armed Forces Reservists Holiday Trading Scheme (buy/sell annual leave) Secure, well-equipped defence engineering facility Real career development and internal progression What You'll Do You'll play a key role in maintaining and supporting both UK MOD and international tracked and wheeled tactical military vehicles-work that directly contributes to national defence and operational readiness. The key responsibilities are: Carry out servicing, maintenance, diagnostics, and repairs on military vehicles and associated electrical systems Interpret and work from technical drawings, engineering process plans, and customer specifications Complete accurate documentation, test certificates, and maintenance reports Conduct equipment inspections to meet production, safety, and quality standards Use workshop tools correctly and report any defects or material issues Collaborate with a dedicated engineering team focused on precision, safety, and mission success What You'll Bring City & Guilds / NVQ Level 3 in Light or Heavy Vehicle Maintenance & Repair Proven hands-on experience in a similar mechanical role - Ideal backgrounds: ex-forces, HGV/PSV, commercial dealerships, plant, agricultural machinery Strong understanding of hydraulics, mechanics, and vehicle diagnostics A team-focused mindset with good communication skills Ability to obtain Security Check (SC) clearance (requires no criminal convictions + 5 years UK residency) A targeted medical assessment may be required as part of the onboarding process. If you're an experienced NVQ Level 3 Vehicle Mechanic, Technician, Tank Fitter, HGV/PSV Technician, Commercial Mechanic, or Mechanical Fitter-and you want a career with real purpose-this is a rare opportunity to join a forward-thinking defence company that will invest in your future. Apply Now and Step into a secure, rewarding, future-proof engineering role where your expertise keeps the UK moving, protected, and mission-ready. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
