Coded Welder Location: On-site Fabrication Shop in Birtley, Gateshead Hours: 40 hours per week Rate: Dependent on experience paid via CIS Employment Type: Temporary to Permanent We are looking for an experienced Coded Welder to join an established fabrication team. The successful candidate will work alongside the Fabrication & Welding Manager, welding stainless steel tanks, stainless steel pipework and mild steel frames. The main requirement is strong experience in FCAW/Flux Core welding, with candidates ideally coded to ASME Section IX for Carbon Steel. Experience with GTAW/TIG welding of 316L stainless steel is also desirable. Key Responsibilities Weld and fabricate components from engineering and technical drawings. Carry out welding to the required standards and specifications. Prepare, grind and finish materials and completed products. Complete quality checks on finished work. Use a range of fabrication and welding equipment, including MIG, TIG, plasma cutters and hand tools. Assist with general fabrication tasks as required. Work efficiently to meet strict deadlines and agreed targets. Maintain high standards of quality and comply with all safety, HSEQ and company procedures. Requirements Demonstrable experience in a similar welding/fabrication role. Strong FCAW/Flux Core welding experience. Previous ASME IX coding preferred, ideally for carbon steel. Ability to read and work from engineering drawings. Excellent attention to detail and a strong work ethic. Ability to work independently and as part of a small team. Good communication skills and a proactive attitude. Flexibility to work overtime and weekends when required. Eligible to work permanently in the UK. Full UK driving licence. This is a temporary-to-permanent opportunity for the right candidate. The successful person will need to be reliable, organised, quality-focused and comfortable working to strict deadlines within a small team. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website. JBRP1_UKTJ
Jul 29, 2026
Full time
Coded Welder Location: On-site Fabrication Shop in Birtley, Gateshead Hours: 40 hours per week Rate: Dependent on experience paid via CIS Employment Type: Temporary to Permanent We are looking for an experienced Coded Welder to join an established fabrication team. The successful candidate will work alongside the Fabrication & Welding Manager, welding stainless steel tanks, stainless steel pipework and mild steel frames. The main requirement is strong experience in FCAW/Flux Core welding, with candidates ideally coded to ASME Section IX for Carbon Steel. Experience with GTAW/TIG welding of 316L stainless steel is also desirable. Key Responsibilities Weld and fabricate components from engineering and technical drawings. Carry out welding to the required standards and specifications. Prepare, grind and finish materials and completed products. Complete quality checks on finished work. Use a range of fabrication and welding equipment, including MIG, TIG, plasma cutters and hand tools. Assist with general fabrication tasks as required. Work efficiently to meet strict deadlines and agreed targets. Maintain high standards of quality and comply with all safety, HSEQ and company procedures. Requirements Demonstrable experience in a similar welding/fabrication role. Strong FCAW/Flux Core welding experience. Previous ASME IX coding preferred, ideally for carbon steel. Ability to read and work from engineering drawings. Excellent attention to detail and a strong work ethic. Ability to work independently and as part of a small team. Good communication skills and a proactive attitude. Flexibility to work overtime and weekends when required. Eligible to work permanently in the UK. Full UK driving licence. This is a temporary-to-permanent opportunity for the right candidate. The successful person will need to be reliable, organised, quality-focused and comfortable working to strict deadlines within a small team. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website. JBRP1_UKTJ
Coded Welder Location: On-site Fabrication Shop in Birtley, Gateshead Hours: 40 hours per week Rate: Dependent on experience paid via CIS Employment Type: Temporary to Permanent We are looking for an experienced Coded Welder to join an established fabrication team. The successful candidate will work alongside the Fabrication & Welding Manager, welding stainless steel tanks, stainless steel pipework and mild steel frames. The main requirement is strong experience in FCAW/Flux Core welding, with candidates ideally coded to ASME Section IX for Carbon Steel. Experience with GTAW/TIG welding of 316L stainless steel is also desirable. Key Responsibilities Weld and fabricate components from engineering and technical drawings. Carry out welding to the required standards and specifications. Prepare, grind and finish materials and completed products. Complete quality checks on finished work. Use a range of fabrication and welding equipment, including MIG, TIG, plasma cutters and hand tools. Assist with general fabrication tasks as required. Work efficiently to meet strict deadlines and agreed targets. Maintain high standards of quality and comply with all safety, HSEQ and company procedures. Requirements Demonstrable experience in a similar welding/fabrication role. Strong FCAW/Flux Core welding experience. Previous ASME IX coding preferred, ideally for carbon steel. Ability to read and work from engineering drawings. Excellent attention to detail and a strong work ethic. Ability to work independently and as part of a small team. Good communication skills and a proactive attitude. Flexibility to work overtime and weekends when required. Eligible to work permanently in the UK. Full UK driving licence. This is a temporary-to-permanent opportunity for the right candidate. The successful person will need to be reliable, organised, quality-focused and comfortable working to strict deadlines within a small team. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website. JBRP1_UKTJ
Jul 29, 2026
Full time
Coded Welder Location: On-site Fabrication Shop in Birtley, Gateshead Hours: 40 hours per week Rate: Dependent on experience paid via CIS Employment Type: Temporary to Permanent We are looking for an experienced Coded Welder to join an established fabrication team. The successful candidate will work alongside the Fabrication & Welding Manager, welding stainless steel tanks, stainless steel pipework and mild steel frames. The main requirement is strong experience in FCAW/Flux Core welding, with candidates ideally coded to ASME Section IX for Carbon Steel. Experience with GTAW/TIG welding of 316L stainless steel is also desirable. Key Responsibilities Weld and fabricate components from engineering and technical drawings. Carry out welding to the required standards and specifications. Prepare, grind and finish materials and completed products. Complete quality checks on finished work. Use a range of fabrication and welding equipment, including MIG, TIG, plasma cutters and hand tools. Assist with general fabrication tasks as required. Work efficiently to meet strict deadlines and agreed targets. Maintain high standards of quality and comply with all safety, HSEQ and company procedures. Requirements Demonstrable experience in a similar welding/fabrication role. Strong FCAW/Flux Core welding experience. Previous ASME IX coding preferred, ideally for carbon steel. Ability to read and work from engineering drawings. Excellent attention to detail and a strong work ethic. Ability to work independently and as part of a small team. Good communication skills and a proactive attitude. Flexibility to work overtime and weekends when required. Eligible to work permanently in the UK. Full UK driving licence. This is a temporary-to-permanent opportunity for the right candidate. The successful person will need to be reliable, organised, quality-focused and comfortable working to strict deadlines within a small team. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website. JBRP1_UKTJ
Manual Machinist Up to £41.5k (£20p/hr) Days only DN10 Manual Machinist; the job Our client in the DN10 area of Doncaster are keen to recruit a skilled miller and turner to work on a range of large one off products for industries including agriculture, heavy plant, on-shore oilfields, renewables and fabrication services. You will be working in a spacious workshop as part of a larger workforce comprising welders, fabricators and general machinists working to tight tolerance usually with steel (general / mild steel), stainless steel and aluminium. To apply for the manual machinist position, you will need excellent experience of manufacturing medium sized components both vertical and horizontal milling, drilling, tapping and profile cutting as well as setting up and operating centre lathes for facing, turning, drilling, boring and thread cutting (both internal and external). It is essential that you understand speeds and feeds for different materials, are able to read drawings and how to use vernier callipers, micrometres (internal & external) and gauges. The manual machinist is a days only position and benefits include Salary: Up to £41,500 (£20p/hr) plus overtime if wanted Overtime: Paid at x1.5 for anything over 40hrs Shifts: 8am to 5pm Mon Thurs, finishing at 3pm on Fridays Holidays: 20 days holiday + Stats Extras: Pension scheme, free parking, friendly team Travail Employment Group is operating as an Employment Agency.
Jul 28, 2026
Full time
Manual Machinist Up to £41.5k (£20p/hr) Days only DN10 Manual Machinist; the job Our client in the DN10 area of Doncaster are keen to recruit a skilled miller and turner to work on a range of large one off products for industries including agriculture, heavy plant, on-shore oilfields, renewables and fabrication services. You will be working in a spacious workshop as part of a larger workforce comprising welders, fabricators and general machinists working to tight tolerance usually with steel (general / mild steel), stainless steel and aluminium. To apply for the manual machinist position, you will need excellent experience of manufacturing medium sized components both vertical and horizontal milling, drilling, tapping and profile cutting as well as setting up and operating centre lathes for facing, turning, drilling, boring and thread cutting (both internal and external). It is essential that you understand speeds and feeds for different materials, are able to read drawings and how to use vernier callipers, micrometres (internal & external) and gauges. The manual machinist is a days only position and benefits include Salary: Up to £41,500 (£20p/hr) plus overtime if wanted Overtime: Paid at x1.5 for anything over 40hrs Shifts: 8am to 5pm Mon Thurs, finishing at 3pm on Fridays Holidays: 20 days holiday + Stats Extras: Pension scheme, free parking, friendly team Travail Employment Group is operating as an Employment Agency.
Nuclearinst is seeking experienced TIG and MMA Pipe Welders for the Hinkley Point C Nuclear Power Station construction project in Bridgwater. The role involves performing high-quality welding operations for a significant infrastructure project with long-term prospects. We offer competitive hourly rates, overtime, a 10% bonus on all worked hours, and an attractive benefits package including a pension scheme. Candidates will need to pass specific welding tests and have proven industry experience.
Jul 28, 2026
Full time
Nuclearinst is seeking experienced TIG and MMA Pipe Welders for the Hinkley Point C Nuclear Power Station construction project in Bridgwater. The role involves performing high-quality welding operations for a significant infrastructure project with long-term prospects. We offer competitive hourly rates, overtime, a 10% bonus on all worked hours, and an attractive benefits package including a pension scheme. Candidates will need to pass specific welding tests and have proven industry experience.
Pertemps are currently seeking TIG Welders to join a leading manufacturing business, based in Gainsborough on a full time, ongoing basis. What will I be paid? AM Shift - £14.50. Overtime, £21.75ph (Mon to Sat) & £29ph (Sun) PM Shift - £16.35ph. Overtime, £21.75ph (Mon to Sat) & £29ph (Sun) Working hours: There are 2 shifts you can choose from, you will NOT rotate AM Shift - Monday to Friday - 06:00 to 14:30 PM Shift - Monday to Thursday - 14:30 to 01:00 What will I be doing as a TIG Welder? Welding components in stainless and mild steel using TIG or gas fusion welding techniques Reading and interpreting engineering drawings and weld symbols to meet customer specifications Using jigs, fixtures, and measuring equipment to ensure accuracy and minimise scrap Completing check sheets for traceability in line with standards Maintaining a clean, safe, and organised work environment Reporting any issues, defects, or safety concerns to the Team Leader promptly What skills and experience do I need? Some experience in welding techniques, particularly TIG or gas fusion welding, up to 2mm thick (stainless steel) Ability to work from Standard Operating Procedures and use jigs/fixtures for quality control Health and Safety awareness and a commitment to maintaining a safe working environment Strong attention to detail and a quality-focused mindset Enthusiastic, reliable, and team-oriented attitude Ability to read engineering drawings and weld symbols Experience in a manufacturing or factory environment Reliable transport to reach site
Jul 27, 2026
Full time
Pertemps are currently seeking TIG Welders to join a leading manufacturing business, based in Gainsborough on a full time, ongoing basis. What will I be paid? AM Shift - £14.50. Overtime, £21.75ph (Mon to Sat) & £29ph (Sun) PM Shift - £16.35ph. Overtime, £21.75ph (Mon to Sat) & £29ph (Sun) Working hours: There are 2 shifts you can choose from, you will NOT rotate AM Shift - Monday to Friday - 06:00 to 14:30 PM Shift - Monday to Thursday - 14:30 to 01:00 What will I be doing as a TIG Welder? Welding components in stainless and mild steel using TIG or gas fusion welding techniques Reading and interpreting engineering drawings and weld symbols to meet customer specifications Using jigs, fixtures, and measuring equipment to ensure accuracy and minimise scrap Completing check sheets for traceability in line with standards Maintaining a clean, safe, and organised work environment Reporting any issues, defects, or safety concerns to the Team Leader promptly What skills and experience do I need? Some experience in welding techniques, particularly TIG or gas fusion welding, up to 2mm thick (stainless steel) Ability to work from Standard Operating Procedures and use jigs/fixtures for quality control Health and Safety awareness and a commitment to maintaining a safe working environment Strong attention to detail and a quality-focused mindset Enthusiastic, reliable, and team-oriented attitude Ability to read engineering drawings and weld symbols Experience in a manufacturing or factory environment Reliable transport to reach site
TIG Welder Northampton Based 13 per hour / Onsite Parking / Mon-Fri / Days / 8:00-16:30 Mon-Thurs 08:00-15:30 Fri / 39 hours per week We are looking for a TIG Welder to join our client who are an established business. Reporting to the Production Manager you will be part of the Warehouse/Production team. Must have TIG. About the role As a TIG Welder you will be involved in the welding and production stages of the process. You will be working within a team where the main aspects of the role are the following. Welding and production General Warehouse duties Picking Packing Precision-focused & Meticulous task management Maintaining high standards of workmanship and safety Skills and Experience You will require to come from a production/Welding background. Have worked in a fast paced environment and can meet deadlines Basic numeracy and literacy skills for recording data Have a good eye for detail and shows initiative Be willing to learn and show flexibility Be a team player with good time keeping. Must have a TIG. This is a great opportunity for someone who is looking to work in a fast paced hands on environment. If the role is for you, please click apply or for more information, please contact Holly in the Wellingborough office. Travail Employment Group Ltd is acting as an Employment Business in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion.
Jul 27, 2026
Seasonal
TIG Welder Northampton Based 13 per hour / Onsite Parking / Mon-Fri / Days / 8:00-16:30 Mon-Thurs 08:00-15:30 Fri / 39 hours per week We are looking for a TIG Welder to join our client who are an established business. Reporting to the Production Manager you will be part of the Warehouse/Production team. Must have TIG. About the role As a TIG Welder you will be involved in the welding and production stages of the process. You will be working within a team where the main aspects of the role are the following. Welding and production General Warehouse duties Picking Packing Precision-focused & Meticulous task management Maintaining high standards of workmanship and safety Skills and Experience You will require to come from a production/Welding background. Have worked in a fast paced environment and can meet deadlines Basic numeracy and literacy skills for recording data Have a good eye for detail and shows initiative Be willing to learn and show flexibility Be a team player with good time keeping. Must have a TIG. This is a great opportunity for someone who is looking to work in a fast paced hands on environment. If the role is for you, please click apply or for more information, please contact Holly in the Wellingborough office. Travail Employment Group Ltd is acting as an Employment Business in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion.
Would you like to work on products that make a difference to peoples lives? We are recruiting a skilled TIG welder/fabricator to join our great facility located off Dalton Lane in Keighley. You will fabricate and assemble stairlift tracks and tubes from technical drawings using TIG welding and various methods of assembly click apply for full job details
Jul 27, 2026
Full time
Would you like to work on products that make a difference to peoples lives? We are recruiting a skilled TIG welder/fabricator to join our great facility located off Dalton Lane in Keighley. You will fabricate and assemble stairlift tracks and tubes from technical drawings using TIG welding and various methods of assembly click apply for full job details
Role: TIG and MMA Pipe Welders - Hinkley Point C Nuclear Power Station Construction Project (Day or Nightshift) Location: HPC site nr Bridgwater, Somerset (TA5 1UD) Salary: £29.34/hr Monday-Thursday (38 hours) £41.07/hr Friday morning - 12:00 Saturday £52.81 Midday Saturday to Sunday 12pm (.5% shift allowance for nightshift hours) Benefits: Up to 10% bonus on all hours worked + generous holiday allowance, contributory pension scheme and sick pay Accommodation: £355.67/wk Duration: Long-term permanent position Start: August 2026 onwards Morson Talent currently have excellent opportunities for Welders skilled in TIG and MMA with heavy industry (e.g. oil and gas, petrochemical, power, nuclear, marine, refinery, chemical, etc) experience to join our client's existing site team at Hinkley Point 'C' on a permanent basis. You'll become part of the Nuclear New Build MEH Alliance at Hinkley Point 'C' in Somerset - the UK's largest construction infrastructure Project. You will join a team striving for excellence and playing a pivotal role in the delivery of complex piping and cabling systems to the nation's first-ever 3rd Generation nuclear power plant. These roles can be employed on a dayshift or nightshift basis, at the preference of the candidate (.5% nightshift allowance). Significant overtime (Friday Sunday every other week (11 days on / 3 day off work pattern , paid at enhanced rates will also be available. These are long term opportunities with an expected duration of 6 7 years on HPC for welders with the required skills, followed by subsequent work on the future Sizewell 'C' project. The Role Working within the MEH Alliance, individuals will collaborate effectively to deliver complex piping and cabling systems. Key duties and responsibilities will include: Perform welding operations to a radiographic standard. Conduct equipment inspections. Adhere to established welding protocols and safety regulations, including fume control. Identify and report potential welding problems for corrective action. Ability to identify your own welds for quality control. Comply with established quality control procedures and documentation standards. You are a great fit if you have proven experience in the following: TIG Welders - required for high integrity pipe welding Structural MMA Welders - required for pipe supports and brackets at Hinkley Point C. Suitable candidates will be required to test to the following ISO 9606 standards: SWQ 02 - 2"Nb XXS Carbon Steel Pipe Butt Weld, H L045, TIG throughout with an ER 70 S 6 wire SWQ 04 - 2"Nb XXS Stainless Steel Pipe Butt Weld, H L045, TIG throughout, ER 70 S 6 wire and 316L Tig rod SWQ 22 - Multi Pass Fillet Weld completed on a 60 x 60 x 6mm Box Section to a 200 x 200 x 12mm Plate utilizing the TIG welding process, 316L Tig wire completed in the PH welding position SWQ 19 - Multi Pass Fillet Weld completed on a 60 x 60 x 5mm Box Section to a 200 x 200 x 12mm plate utilizing the TIG welding process, ER 70 S 6 Tig wire completed in the PH position Also, for MMA SWQ 70 -Multi Pass Fillet Weld completed on a 60 x 60 x 5mm Box Section to a 200 x 200 x 12mm plate utilizing the MMA welding Process 7018 Low Hydrogen Electrodes completed in the PH position Candidates will be required to pass SWQ 02, 04 and 70 to be considered. Qualifications and Experience Ideally possess a Level 2 or Level 3 Diploma in Welding or Fabrication discipline OR Welding apprenticeship or an equivalent apprenticeship in a Welding discipline (Minimum Level 5 in the above if apprenticeship/qualification awarded in Scotland) OR ACE Card in Welding Pipe or Plate. If not, at least 5 years experience as a Welder in a relevant industry (e.g. oil and gas, petrochemical, chemical, power, marine, shipbuilding, etc) Must have / be able to obtain a CCNSG Safety Passport (not a condition of being considered / offered a role but must be obtained at least 2 weeks prior to starting) Ability to pass BPSS security vetting If you want to gain unique experience on a nationally significant construction project this opportunity is for you. Our client offers excellent pay rates along with an exceptional benefits package that includes a 10% bonus, generous holiday allowance, pension scheme, sick pay, as well as 22.5% nightshift allowance, generous overtime and more.
Jul 26, 2026
Full time
Role: TIG and MMA Pipe Welders - Hinkley Point C Nuclear Power Station Construction Project (Day or Nightshift) Location: HPC site nr Bridgwater, Somerset (TA5 1UD) Salary: £29.34/hr Monday-Thursday (38 hours) £41.07/hr Friday morning - 12:00 Saturday £52.81 Midday Saturday to Sunday 12pm (.5% shift allowance for nightshift hours) Benefits: Up to 10% bonus on all hours worked + generous holiday allowance, contributory pension scheme and sick pay Accommodation: £355.67/wk Duration: Long-term permanent position Start: August 2026 onwards Morson Talent currently have excellent opportunities for Welders skilled in TIG and MMA with heavy industry (e.g. oil and gas, petrochemical, power, nuclear, marine, refinery, chemical, etc) experience to join our client's existing site team at Hinkley Point 'C' on a permanent basis. You'll become part of the Nuclear New Build MEH Alliance at Hinkley Point 'C' in Somerset - the UK's largest construction infrastructure Project. You will join a team striving for excellence and playing a pivotal role in the delivery of complex piping and cabling systems to the nation's first-ever 3rd Generation nuclear power plant. These roles can be employed on a dayshift or nightshift basis, at the preference of the candidate (.5% nightshift allowance). Significant overtime (Friday Sunday every other week (11 days on / 3 day off work pattern , paid at enhanced rates will also be available. These are long term opportunities with an expected duration of 6 7 years on HPC for welders with the required skills, followed by subsequent work on the future Sizewell 'C' project. The Role Working within the MEH Alliance, individuals will collaborate effectively to deliver complex piping and cabling systems. Key duties and responsibilities will include: Perform welding operations to a radiographic standard. Conduct equipment inspections. Adhere to established welding protocols and safety regulations, including fume control. Identify and report potential welding problems for corrective action. Ability to identify your own welds for quality control. Comply with established quality control procedures and documentation standards. You are a great fit if you have proven experience in the following: TIG Welders - required for high integrity pipe welding Structural MMA Welders - required for pipe supports and brackets at Hinkley Point C. Suitable candidates will be required to test to the following ISO 9606 standards: SWQ 02 - 2"Nb XXS Carbon Steel Pipe Butt Weld, H L045, TIG throughout with an ER 70 S 6 wire SWQ 04 - 2"Nb XXS Stainless Steel Pipe Butt Weld, H L045, TIG throughout, ER 70 S 6 wire and 316L Tig rod SWQ 22 - Multi Pass Fillet Weld completed on a 60 x 60 x 6mm Box Section to a 200 x 200 x 12mm Plate utilizing the TIG welding process, 316L Tig wire completed in the PH welding position SWQ 19 - Multi Pass Fillet Weld completed on a 60 x 60 x 5mm Box Section to a 200 x 200 x 12mm plate utilizing the TIG welding process, ER 70 S 6 Tig wire completed in the PH position Also, for MMA SWQ 70 -Multi Pass Fillet Weld completed on a 60 x 60 x 5mm Box Section to a 200 x 200 x 12mm plate utilizing the MMA welding Process 7018 Low Hydrogen Electrodes completed in the PH position Candidates will be required to pass SWQ 02, 04 and 70 to be considered. Qualifications and Experience Ideally possess a Level 2 or Level 3 Diploma in Welding or Fabrication discipline OR Welding apprenticeship or an equivalent apprenticeship in a Welding discipline (Minimum Level 5 in the above if apprenticeship/qualification awarded in Scotland) OR ACE Card in Welding Pipe or Plate. If not, at least 5 years experience as a Welder in a relevant industry (e.g. oil and gas, petrochemical, chemical, power, marine, shipbuilding, etc) Must have / be able to obtain a CCNSG Safety Passport (not a condition of being considered / offered a role but must be obtained at least 2 weeks prior to starting) Ability to pass BPSS security vetting If you want to gain unique experience on a nationally significant construction project this opportunity is for you. Our client offers excellent pay rates along with an exceptional benefits package that includes a 10% bonus, generous holiday allowance, pension scheme, sick pay, as well as 22.5% nightshift allowance, generous overtime and more.
BMSL Group require a Pipefitter Welder for a project in Hull. Works running for 4 weeks. 6 DAYS A WEEK £33.00 P/HR Overtime Tx1.4 on Saturday £80.00 per night lodge paid if required, but local candidates preferred Must be confident with Tig Mig Arc Working with Carbon Steel, Sched 40 Pipe Must hold a valid CSCS Skill card 7am - 7pm available Monday to Saturday Free on site parking Start Date: ASAP Please get in touch via this advert if you are interested in obtaining a start on this project.
Jul 26, 2026
Seasonal
BMSL Group require a Pipefitter Welder for a project in Hull. Works running for 4 weeks. 6 DAYS A WEEK £33.00 P/HR Overtime Tx1.4 on Saturday £80.00 per night lodge paid if required, but local candidates preferred Must be confident with Tig Mig Arc Working with Carbon Steel, Sched 40 Pipe Must hold a valid CSCS Skill card 7am - 7pm available Monday to Saturday Free on site parking Start Date: ASAP Please get in touch via this advert if you are interested in obtaining a start on this project.
GBR Recruitment Ltd are working in exclusive partnership with a leading steel structures company based in Leicestershire recruiting for two experienced MIG & TIG Welder Fabricators to construct & assemble mild steel & stainless steel parts adhering to the set project specifications / technical drawings. Key duties include: Reading & working to technical engineering drawings Cutting / forming materials, grinding, bending using workshop machinery (e.g., press brakes, guillotines & drills) Fabricating & producing high-quality MIG & TIG welds on mild steel, stainless steel & aluminium Performing weld quality & dimensional checks against set specifications. Maintain, clean, and perform preventative maintenance on welding torches, gas lines, and fabrication tools. Attributes: Proven experience in a fabricator welder role, using mild & stainless steel to produce bespoke builds. Capability to work with and adjust techniques for mild steel, stainless steel & aluminium works. Current or previous coded welding certifications / time served welder High attention to detail with the ability to use precision measuring tools Used to working in a workshop & happy to be workshop based. There are x2 vacancies available, apply today & start near on immediately. Great business with a strong order book.
Jul 26, 2026
Full time
GBR Recruitment Ltd are working in exclusive partnership with a leading steel structures company based in Leicestershire recruiting for two experienced MIG & TIG Welder Fabricators to construct & assemble mild steel & stainless steel parts adhering to the set project specifications / technical drawings. Key duties include: Reading & working to technical engineering drawings Cutting / forming materials, grinding, bending using workshop machinery (e.g., press brakes, guillotines & drills) Fabricating & producing high-quality MIG & TIG welds on mild steel, stainless steel & aluminium Performing weld quality & dimensional checks against set specifications. Maintain, clean, and perform preventative maintenance on welding torches, gas lines, and fabrication tools. Attributes: Proven experience in a fabricator welder role, using mild & stainless steel to produce bespoke builds. Capability to work with and adjust techniques for mild steel, stainless steel & aluminium works. Current or previous coded welding certifications / time served welder High attention to detail with the ability to use precision measuring tools Used to working in a workshop & happy to be workshop based. There are x2 vacancies available, apply today & start near on immediately. Great business with a strong order book.
GBR Recruitment Ltd are working in exclusive partnership with a leading steel structures company based in Leicestershire recruiting for two experienced MIG & TIG Welder Fabricators to construct & assemble mild steel & stainless steel parts adhering to the set project specifications / technical drawings. Key duties include: Reading & working to technical engineering drawings Cutting / forming materials, grinding, bending using workshop machinery (e.g., press brakes, guillotines & drills) Fabricating & producing high-quality MIG & TIG welds on mild steel, stainless steel & aluminium Performing weld quality & dimensional checks against set specifications. Maintain, clean, and perform preventative maintenance on welding torches, gas lines, and fabrication tools. Attributes: Proven experience in a fabricator welder role, using mild & stainless steel to produce bespoke builds. Capability to work with and adjust techniques for mild steel, stainless steel & aluminium works. Current or previous coded welding certifications / time served welder High attention to detail with the ability to use precision measuring tools Used to working in a workshop & happy to be workshop based. There are x2 vacancies available, apply today & start near on immediately. Great business with a strong order book.
Jul 26, 2026
Full time
GBR Recruitment Ltd are working in exclusive partnership with a leading steel structures company based in Leicestershire recruiting for two experienced MIG & TIG Welder Fabricators to construct & assemble mild steel & stainless steel parts adhering to the set project specifications / technical drawings. Key duties include: Reading & working to technical engineering drawings Cutting / forming materials, grinding, bending using workshop machinery (e.g., press brakes, guillotines & drills) Fabricating & producing high-quality MIG & TIG welds on mild steel, stainless steel & aluminium Performing weld quality & dimensional checks against set specifications. Maintain, clean, and perform preventative maintenance on welding torches, gas lines, and fabrication tools. Attributes: Proven experience in a fabricator welder role, using mild & stainless steel to produce bespoke builds. Capability to work with and adjust techniques for mild steel, stainless steel & aluminium works. Current or previous coded welding certifications / time served welder High attention to detail with the ability to use precision measuring tools Used to working in a workshop & happy to be workshop based. There are x2 vacancies available, apply today & start near on immediately. Great business with a strong order book.
About Us We re a specialist recruitment partner working with a leading manufacturer who are currently looking experienced fabricator welders. Our client delivers a range of products for the construction industry varying from large scale pipe fabrication to plant room equipment for leading industry clients. They pride themselves on technical quality, safety, and on-time delivery. Overview We are seeking experienced Fabricator Welders to join the fabrication shop. You will produce heavy-gauge steel components and assemblies from drawings and welding procedures, working closely with fitters, welders, grinders, QA and production leads to meet safety, quality and schedule targets. Key Responsibilities Read and interpret fabrication drawings, GA drawings, weld symbols and material lists Lay out, cut, level and prepare heavy-gauge plate and structural sections Work with jigs/fixtures, heavy lifting equipment (overhead cranes, chains, slings) and align assemblies for welding Carry out dimensional checks, straightening and grinding to finished tolerances Perform basic assembly fabrication: drilling, bolting, tack-assembly and temporary/ permanent joins Collaborate with QA to ensure weld/inspection requirements (NDT, visual inspection) are met Maintain a clean, safe workspace and follow site safety procedures and PPE rules Record time/materials and report progress to the production lead Skills & Experience (Essential) Proven Pipe Welding Experience - Vertical & Horizontal Proven experience fabricating heavy-gauge Mig (Tig is desirable) Competent reading of technical drawings and welding symbols Skilled in plate fitting, jigging and structural assembly Ability to use fabrication tools: oxy/acetylene, plasma/oxy-fuel cutting, grinders, drills, bevelers Experience with overhead cranes and safe lifting practices If interested, please feel free to get in touch by calling our landline on (phone number removed)
Jul 25, 2026
Seasonal
About Us We re a specialist recruitment partner working with a leading manufacturer who are currently looking experienced fabricator welders. Our client delivers a range of products for the construction industry varying from large scale pipe fabrication to plant room equipment for leading industry clients. They pride themselves on technical quality, safety, and on-time delivery. Overview We are seeking experienced Fabricator Welders to join the fabrication shop. You will produce heavy-gauge steel components and assemblies from drawings and welding procedures, working closely with fitters, welders, grinders, QA and production leads to meet safety, quality and schedule targets. Key Responsibilities Read and interpret fabrication drawings, GA drawings, weld symbols and material lists Lay out, cut, level and prepare heavy-gauge plate and structural sections Work with jigs/fixtures, heavy lifting equipment (overhead cranes, chains, slings) and align assemblies for welding Carry out dimensional checks, straightening and grinding to finished tolerances Perform basic assembly fabrication: drilling, bolting, tack-assembly and temporary/ permanent joins Collaborate with QA to ensure weld/inspection requirements (NDT, visual inspection) are met Maintain a clean, safe workspace and follow site safety procedures and PPE rules Record time/materials and report progress to the production lead Skills & Experience (Essential) Proven Pipe Welding Experience - Vertical & Horizontal Proven experience fabricating heavy-gauge Mig (Tig is desirable) Competent reading of technical drawings and welding symbols Skilled in plate fitting, jigging and structural assembly Ability to use fabrication tools: oxy/acetylene, plasma/oxy-fuel cutting, grinders, drills, bevelers Experience with overhead cranes and safe lifting practices If interested, please feel free to get in touch by calling our landline on (phone number removed)
Our client, based in the South Manchester area near Stockport, is looking for a skilled Fabricator/Welder to start straight away. The job is on days, with hours of 7:30am - 3:30pm, and will pay £15-16/hr PAYE. Initially the role will start through the agency for 2-3 months, but may become more permanent depending on workloads and an upcoming retirement. Someone from a sheet metal background who is used to carrying out TIG welding and able to read engineering drawings would be preferred. This role involves working with various materials, primarily sheet metal, to assemble components and create high-quality products. Responsibilities Fabricate and assemble metal structures and parts according to specifications. Read and understand engineering drawings in order to carry out fabrication. Work with a variety of metals to produce high quality work. Work with a small team but also be able to manage their own small welding jobs. Requirements Skilled/qualified in welding (mainly TIG) and able to read drawings. Experience working with sheet metal beneficial. Proficiency in using hand tools and power tools safely and effectively. Ability to work independently while also being a cooperative team player. If you feel you are well suited to the Welder/Fabricator position, please apply with your full updated CV. If you are suitable for the role in terms of your location and experience, I will contact you within 24 hours to discuss your application further.
Jul 25, 2026
Full time
Our client, based in the South Manchester area near Stockport, is looking for a skilled Fabricator/Welder to start straight away. The job is on days, with hours of 7:30am - 3:30pm, and will pay £15-16/hr PAYE. Initially the role will start through the agency for 2-3 months, but may become more permanent depending on workloads and an upcoming retirement. Someone from a sheet metal background who is used to carrying out TIG welding and able to read engineering drawings would be preferred. This role involves working with various materials, primarily sheet metal, to assemble components and create high-quality products. Responsibilities Fabricate and assemble metal structures and parts according to specifications. Read and understand engineering drawings in order to carry out fabrication. Work with a variety of metals to produce high quality work. Work with a small team but also be able to manage their own small welding jobs. Requirements Skilled/qualified in welding (mainly TIG) and able to read drawings. Experience working with sheet metal beneficial. Proficiency in using hand tools and power tools safely and effectively. Ability to work independently while also being a cooperative team player. If you feel you are well suited to the Welder/Fabricator position, please apply with your full updated CV. If you are suitable for the role in terms of your location and experience, I will contact you within 24 hours to discuss your application further.
We have an excellent opportunity for an experienced Fabricator / Welder to join an expanding award-winning team of production technicians, manufacturing stainless steel components, for the automotive, utilities and food industries based close to Meadowhall and the M1 motorway in Sheffield. About the role The role of a Fabricator / Welder involves working within a passionate team responsible for fabricating and TIG welding various products to the highest standards. Key activities involve: Successfully achieving the daily planned production schedule Maintaining and striving to improve, production quality Contributing to the smooth operation of the workshop About the hours & rewards As a Fabricator / Welder, you will work Monday to Friday, 40 hours a week and the benefits are: A salary of £14.00 - £20.00 per hour (depending on experience). Daytime & weekday work only / Early finish Fridays (No weekend work unless on overtime) 4 weeks plus 8 days statutory holiday (plus a holiday scheme gaining 1 additional day per year of service) Christmas/New Year Shutdown Company Pension Generous Overtime rates Staff Parking Staff discount on company products Company Events About you As a Fabricator / Welder, you must have a professional approach to work and possess the drive and energy to contribute to a flexible, fast-paced environment and contribute to the overall performance and growth of both companies and you must have / be: A proven track record of the high quality TIG / MIG welding and general fabrication skills. Able to produce work of a high standard within given time constraints. Have a good attendance and timekeeping record. Open to new ideas and make a positive contribution to the team. Some experience in small bore pipe welding / Jig work and stainless steel fabrication, (advantageous not essential) More about the company Our client is a renowned Sheffield company with an established substantial and growing client base and an excellent reputation in the industry. They are a family run business with a strong work ethic and a team of long-serving and highly dedicated industry professionals and as holders of ISO9001 and the prestigious Made in Sheffield they take a great pride in the quality of their products, specialising in small component fabrication and welding services. As 2023 winners of the Made in Yorkshire Manufacturer of the Year (u. £25M) award, the company constantly strives to evolve, grow and continuously seek excellence in all operations, working closely with the Company of Cutler s in Hallamshire. How to apply Please note that eRecruitSmart is advertising the role of Welder / Fabricator on behalf of the Hiring Company and your CV will be sent to the Hiring Manager who is responsible for the vacancy that you have applied to. Please only apply if you consent to these terms. You must reside in and have eligibility to work in the UK and live within a reasonable commute to Sheffield. Please note, only suitable applicants will be contacted. If your address and contact details are not on your CV, you will not be considered. We look forward to hearing from you!
Jul 24, 2026
Full time
We have an excellent opportunity for an experienced Fabricator / Welder to join an expanding award-winning team of production technicians, manufacturing stainless steel components, for the automotive, utilities and food industries based close to Meadowhall and the M1 motorway in Sheffield. About the role The role of a Fabricator / Welder involves working within a passionate team responsible for fabricating and TIG welding various products to the highest standards. Key activities involve: Successfully achieving the daily planned production schedule Maintaining and striving to improve, production quality Contributing to the smooth operation of the workshop About the hours & rewards As a Fabricator / Welder, you will work Monday to Friday, 40 hours a week and the benefits are: A salary of £14.00 - £20.00 per hour (depending on experience). Daytime & weekday work only / Early finish Fridays (No weekend work unless on overtime) 4 weeks plus 8 days statutory holiday (plus a holiday scheme gaining 1 additional day per year of service) Christmas/New Year Shutdown Company Pension Generous Overtime rates Staff Parking Staff discount on company products Company Events About you As a Fabricator / Welder, you must have a professional approach to work and possess the drive and energy to contribute to a flexible, fast-paced environment and contribute to the overall performance and growth of both companies and you must have / be: A proven track record of the high quality TIG / MIG welding and general fabrication skills. Able to produce work of a high standard within given time constraints. Have a good attendance and timekeeping record. Open to new ideas and make a positive contribution to the team. Some experience in small bore pipe welding / Jig work and stainless steel fabrication, (advantageous not essential) More about the company Our client is a renowned Sheffield company with an established substantial and growing client base and an excellent reputation in the industry. They are a family run business with a strong work ethic and a team of long-serving and highly dedicated industry professionals and as holders of ISO9001 and the prestigious Made in Sheffield they take a great pride in the quality of their products, specialising in small component fabrication and welding services. As 2023 winners of the Made in Yorkshire Manufacturer of the Year (u. £25M) award, the company constantly strives to evolve, grow and continuously seek excellence in all operations, working closely with the Company of Cutler s in Hallamshire. How to apply Please note that eRecruitSmart is advertising the role of Welder / Fabricator on behalf of the Hiring Company and your CV will be sent to the Hiring Manager who is responsible for the vacancy that you have applied to. Please only apply if you consent to these terms. You must reside in and have eligibility to work in the UK and live within a reasonable commute to Sheffield. Please note, only suitable applicants will be contacted. If your address and contact details are not on your CV, you will not be considered. We look forward to hearing from you!
Welder / Fabricator Required! (MIG / TIG) BE Recruitment are recruiting A Welder / Fabricator / for a sheet metal engineering company based in East Goscote, Leicester (LE7). Preferably experience in MIG, TIG, Stainless & Aluminium . Working Hours: Monday - Wednesday: 14:00 - 00:00 Thursday: 14:00 - 23:30 Friday: Off Pay. Pay: 14.50 - 17 per hour. (Dependant on skill level) Temp to Perm! Benefits: On-site parking. 50 Bonus Per Month for on-time clock-ins. (Once Passed Probation). 100 Birthday Bonus. Full Lockers & Work wear Provided. Tool Club - Opportunities to purchase own tools / kit at heavily discounted rate. (Can be paid via weekly instalments directly from wages). Overtime opportunities available. Progression Available. Minimum Skills / Experience Required: Strong engineering background with the ability to read and interpret engineering drawings. Experienced in MIG / TIG welding. Proficient in additional fabrication skills, including grinding and fettling, to ensure a high-quality finish. Comfortable working in a heavy engineering environment. Excellent time management and workload prioritisation skills. Ability to work effectively in small teams, meet deadlines, and communicate efficiently within the department and across the business. Positive can-do attitude. Please apply if interested, and one our team will be in touch! If you haven't heard back from us within 3 weeks, please assume that unfortunately on this occasion your application has been unsuccessful. We act as an employment business in relation to this vacancy. BE Recruitment is an equal opportunity recruiter and therefore we welcome applications from all suitability skilled or qualified individuals, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age.
Jul 24, 2026
Full time
Welder / Fabricator Required! (MIG / TIG) BE Recruitment are recruiting A Welder / Fabricator / for a sheet metal engineering company based in East Goscote, Leicester (LE7). Preferably experience in MIG, TIG, Stainless & Aluminium . Working Hours: Monday - Wednesday: 14:00 - 00:00 Thursday: 14:00 - 23:30 Friday: Off Pay. Pay: 14.50 - 17 per hour. (Dependant on skill level) Temp to Perm! Benefits: On-site parking. 50 Bonus Per Month for on-time clock-ins. (Once Passed Probation). 100 Birthday Bonus. Full Lockers & Work wear Provided. Tool Club - Opportunities to purchase own tools / kit at heavily discounted rate. (Can be paid via weekly instalments directly from wages). Overtime opportunities available. Progression Available. Minimum Skills / Experience Required: Strong engineering background with the ability to read and interpret engineering drawings. Experienced in MIG / TIG welding. Proficient in additional fabrication skills, including grinding and fettling, to ensure a high-quality finish. Comfortable working in a heavy engineering environment. Excellent time management and workload prioritisation skills. Ability to work effectively in small teams, meet deadlines, and communicate efficiently within the department and across the business. Positive can-do attitude. Please apply if interested, and one our team will be in touch! If you haven't heard back from us within 3 weeks, please assume that unfortunately on this occasion your application has been unsuccessful. We act as an employment business in relation to this vacancy. BE Recruitment is an equal opportunity recruiter and therefore we welcome applications from all suitability skilled or qualified individuals, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age.
Supreme Recruitment Services Limited
City, Birmingham
Supreme Recruitment Services Ltd is currently recruiting for an experienced TIG Welder with MIG/Stick welding skills to join a well-established manufacturing business based in the Aston area. This is an excellent opportunity to join a growing and reputable company that values reliability and a positive attitude. The successful candidate will play a key role in the welding both mild steel and stainless steel products, ensuring work is completed to a high standard. Key Responsibilities Carrying out TIG welding to a high standard Welding and assembling components Inspecting finished work to ensure quality standards are met Maintaining a clean and safe working environment Working effectively as part of a busy production team Requirements Previous experience as a Tig Welder Proven TIG welding experience (essential) Ability to read and interpret engineering drawings Strong attention to detail and commitment to quality Reliable, punctual, and hardworking Hours 08:00am - 17:00pm Monday- Thursday 08:00am - 15:30pm on a Friday Pay 15.00 - 16.00 dependent on experience If you have the required TIG welding experience and are looking for your next opportunity with a respected employer, we'd love to hear from you.
Jul 24, 2026
Seasonal
Supreme Recruitment Services Ltd is currently recruiting for an experienced TIG Welder with MIG/Stick welding skills to join a well-established manufacturing business based in the Aston area. This is an excellent opportunity to join a growing and reputable company that values reliability and a positive attitude. The successful candidate will play a key role in the welding both mild steel and stainless steel products, ensuring work is completed to a high standard. Key Responsibilities Carrying out TIG welding to a high standard Welding and assembling components Inspecting finished work to ensure quality standards are met Maintaining a clean and safe working environment Working effectively as part of a busy production team Requirements Previous experience as a Tig Welder Proven TIG welding experience (essential) Ability to read and interpret engineering drawings Strong attention to detail and commitment to quality Reliable, punctual, and hardworking Hours 08:00am - 17:00pm Monday- Thursday 08:00am - 15:30pm on a Friday Pay 15.00 - 16.00 dependent on experience If you have the required TIG welding experience and are looking for your next opportunity with a respected employer, we'd love to hear from you.
Engineering Recruitment Consultant West Yorkshire £35,000£40,000 + Uncapped Commission If you've built your reputation recruiting into welding and fabrication, mechanical assembly or machine operations, you'll know how few consultancies genuinely understand this market. This one does, and they're looking for an experienced engineering recruiter to take a key desk within a well-established West Yorkshire branch. What's on offer £35,000£40,000 basic salary, genuinely negotiable on experience and track record. Uncapped commission. An established desk with live engineering clients and repeat business, not a cold start. Autonomy to run your desk your way, no micromanagement, no pointless KPIs for the sake of it. A respected, long-standing brand name that gets your calls returned. Company benefits package. A settled, experienced team with a hardworking but flexible culture. The role You'll take ownership of a busy engineering desk supplying skilled trades and operatives including welders, fabricators, mechanical assemblers, machine operators and similar into manufacturing and engineering businesses across West Yorkshire. This is a full 360 role for someone who knows the sector inside out: Managing and developing an existing portfolio of engineering and manufacturing clients. Winning new business across a market you already understand. Sourcing, vetting and placing skilled candidates, you'll know a good coded welder when you see one, and your clients will trust your judgement because of it. Delivering the kind of consistent, knowledgeable service that turns one-off vacancies into long-term accounts. Who this suits This is not a trainee or step-up role. The client wants someone who can demonstrate: Proven engineering recruitment experience, with real, evidenced achievements recruiting within welding/fabrication, mechanical assembly, machine operations or closely related disciplines. A track record of billings you're happy to talk through, the salary range exists because they'll pay properly for proven performance. Genuine technical credibility where you can hold a conversation about the difference between MIG and TIG, understand what a client means by "time-served," and qualify candidates properly. The ability to run a busy 360 desk independently, so managing your own time across sales, service and delivery is key. High standards and strong communication as this is a business built on reputation, and they protect it. Ambition for a long-term move. This is a career desk, not a stopgap. Why make the move? Because engineering desks like this don't come up often. Most consultancies treat industrial and engineering as one generic desk but this client has invested in the sector properly, built genuine relationships with manufacturing businesses across the region, and now needs a specialist who can take it further. You'll inherit some warm clients, earn without a cap, and work for a name that opens doors rather than one you have to explain. Apply in complete confidence. Your details will never be sent to any client without your express permission, and your current employer will not know you've enquired. JBRP1_UKTJ
Jul 24, 2026
Full time
Engineering Recruitment Consultant West Yorkshire £35,000£40,000 + Uncapped Commission If you've built your reputation recruiting into welding and fabrication, mechanical assembly or machine operations, you'll know how few consultancies genuinely understand this market. This one does, and they're looking for an experienced engineering recruiter to take a key desk within a well-established West Yorkshire branch. What's on offer £35,000£40,000 basic salary, genuinely negotiable on experience and track record. Uncapped commission. An established desk with live engineering clients and repeat business, not a cold start. Autonomy to run your desk your way, no micromanagement, no pointless KPIs for the sake of it. A respected, long-standing brand name that gets your calls returned. Company benefits package. A settled, experienced team with a hardworking but flexible culture. The role You'll take ownership of a busy engineering desk supplying skilled trades and operatives including welders, fabricators, mechanical assemblers, machine operators and similar into manufacturing and engineering businesses across West Yorkshire. This is a full 360 role for someone who knows the sector inside out: Managing and developing an existing portfolio of engineering and manufacturing clients. Winning new business across a market you already understand. Sourcing, vetting and placing skilled candidates, you'll know a good coded welder when you see one, and your clients will trust your judgement because of it. Delivering the kind of consistent, knowledgeable service that turns one-off vacancies into long-term accounts. Who this suits This is not a trainee or step-up role. The client wants someone who can demonstrate: Proven engineering recruitment experience, with real, evidenced achievements recruiting within welding/fabrication, mechanical assembly, machine operations or closely related disciplines. A track record of billings you're happy to talk through, the salary range exists because they'll pay properly for proven performance. Genuine technical credibility where you can hold a conversation about the difference between MIG and TIG, understand what a client means by "time-served," and qualify candidates properly. The ability to run a busy 360 desk independently, so managing your own time across sales, service and delivery is key. High standards and strong communication as this is a business built on reputation, and they protect it. Ambition for a long-term move. This is a career desk, not a stopgap. Why make the move? Because engineering desks like this don't come up often. Most consultancies treat industrial and engineering as one generic desk but this client has invested in the sector properly, built genuine relationships with manufacturing businesses across the region, and now needs a specialist who can take it further. You'll inherit some warm clients, earn without a cap, and work for a name that opens doors rather than one you have to explain. Apply in complete confidence. Your details will never be sent to any client without your express permission, and your current employer will not know you've enquired. JBRP1_UKTJ
Engineering Recruitment Consultant West Yorkshire £35,000£40,000 + Uncapped Commission If you've built your reputation recruiting into welding and fabrication, mechanical assembly or machine operations, you'll know how few consultancies genuinely understand this market. This one does, and they're looking for an experienced engineering recruiter to take a key desk within a well-established West Yorkshire branch. What's on offer £35,000£40,000 basic salary, genuinely negotiable on experience and track record. Uncapped commission. An established desk with live engineering clients and repeat business, not a cold start. Autonomy to run your desk your way, no micromanagement, no pointless KPIs for the sake of it. A respected, long-standing brand name that gets your calls returned. Company benefits package. A settled, experienced team with a hardworking but flexible culture. The role You'll take ownership of a busy engineering desk supplying skilled trades and operatives including welders, fabricators, mechanical assemblers, machine operators and similar into manufacturing and engineering businesses across West Yorkshire. This is a full 360 role for someone who knows the sector inside out: Managing and developing an existing portfolio of engineering and manufacturing clients. Winning new business across a market you already understand. Sourcing, vetting and placing skilled candidates, you'll know a good coded welder when you see one, and your clients will trust your judgement because of it. Delivering the kind of consistent, knowledgeable service that turns one-off vacancies into long-term accounts. Who this suits This is not a trainee or step-up role. The client wants someone who can demonstrate: Proven engineering recruitment experience, with real, evidenced achievements recruiting within welding/fabrication, mechanical assembly, machine operations or closely related disciplines. A track record of billings you're happy to talk through, the salary range exists because they'll pay properly for proven performance. Genuine technical credibility where you can hold a conversation about the difference between MIG and TIG, understand what a client means by "time-served," and qualify candidates properly. The ability to run a busy 360 desk independently, so managing your own time across sales, service and delivery is key. High standards and strong communication as this is a business built on reputation, and they protect it. Ambition for a long-term move. This is a career desk, not a stopgap. Why make the move? Because engineering desks like this don't come up often. Most consultancies treat industrial and engineering as one generic desk but this client has invested in the sector properly, built genuine relationships with manufacturing businesses across the region, and now needs a specialist who can take it further. You'll inherit some warm clients, earn without a cap, and work for a name that opens doors rather than one you have to explain. Apply in complete confidence. Your details will never be sent to any client without your express permission, and your current employer will not know you've enquired. JBRP1_UKTJ
Jul 24, 2026
Full time
Engineering Recruitment Consultant West Yorkshire £35,000£40,000 + Uncapped Commission If you've built your reputation recruiting into welding and fabrication, mechanical assembly or machine operations, you'll know how few consultancies genuinely understand this market. This one does, and they're looking for an experienced engineering recruiter to take a key desk within a well-established West Yorkshire branch. What's on offer £35,000£40,000 basic salary, genuinely negotiable on experience and track record. Uncapped commission. An established desk with live engineering clients and repeat business, not a cold start. Autonomy to run your desk your way, no micromanagement, no pointless KPIs for the sake of it. A respected, long-standing brand name that gets your calls returned. Company benefits package. A settled, experienced team with a hardworking but flexible culture. The role You'll take ownership of a busy engineering desk supplying skilled trades and operatives including welders, fabricators, mechanical assemblers, machine operators and similar into manufacturing and engineering businesses across West Yorkshire. This is a full 360 role for someone who knows the sector inside out: Managing and developing an existing portfolio of engineering and manufacturing clients. Winning new business across a market you already understand. Sourcing, vetting and placing skilled candidates, you'll know a good coded welder when you see one, and your clients will trust your judgement because of it. Delivering the kind of consistent, knowledgeable service that turns one-off vacancies into long-term accounts. Who this suits This is not a trainee or step-up role. The client wants someone who can demonstrate: Proven engineering recruitment experience, with real, evidenced achievements recruiting within welding/fabrication, mechanical assembly, machine operations or closely related disciplines. A track record of billings you're happy to talk through, the salary range exists because they'll pay properly for proven performance. Genuine technical credibility where you can hold a conversation about the difference between MIG and TIG, understand what a client means by "time-served," and qualify candidates properly. The ability to run a busy 360 desk independently, so managing your own time across sales, service and delivery is key. High standards and strong communication as this is a business built on reputation, and they protect it. Ambition for a long-term move. This is a career desk, not a stopgap. Why make the move? Because engineering desks like this don't come up often. Most consultancies treat industrial and engineering as one generic desk but this client has invested in the sector properly, built genuine relationships with manufacturing businesses across the region, and now needs a specialist who can take it further. You'll inherit some warm clients, earn without a cap, and work for a name that opens doors rather than one you have to explain. Apply in complete confidence. Your details will never be sent to any client without your express permission, and your current employer will not know you've enquired. JBRP1_UKTJ
MIG / TIG Welder Fabricator Location: Birmingham Pay: £16.00 - £19.00 per hour (DOE) Shift: Days Monday - Friday Job Type: Permanent Experienced MIG/TIG Welder Fabricator Looking for Your Next Opportunity? Workforce Manufacturing is partnering with several leading engineering and manufacturing businesses across Birmingham that are looking to strengthen their fabrication teams with skilled MIG/TIG Welder Fabricators . Whether your expertise is in stainless steel, mild steel, aluminium, or bespoke fabrication , we have a range of permanent opportunities with reputable employers offering competitive pay, modern workshops, and genuine long-term career prospects. The Role As a MIG/TIG Welder Fabricator, you'll be responsible for producing high-quality fabricated components from engineering drawings, ensuring all work meets the highest standards of workmanship and quality. Your duties may include: MIG and TIG welding on mild steel, stainless steel and aluminium. Fabricating and assembling bespoke products from technical drawings. Measuring, cutting, grinding and preparing materials. Working with a range of fabrication machinery and hand tools. Inspecting completed work to ensure excellent quality standards. Working independently and as part of an experienced fabrication team. Maintaining a safe and organised working environment. What We're Looking For We're keen to hear from candidates who have: Previous experience as a MIG Welder, TIG Welder, Welder Fabricator or Fabricator . The ability to confidently read and interpret engineering drawings. Experience producing high-quality fabrication work. Excellent attention to detail and pride in their workmanship. A full UK Driving Licence and access to their own transport. A valid CSCS Card (desirable but not essential). A positive attitude, reliability and a strong work ethic. What's in It for You? £16.00 - £19.00 per hour , depending on experience. Permanent, full-time employment. Monday to Friday day shifts enjoy your evenings and weekends. Overtime available with many employers. Clean, modern and well-equipped workshops. Stable companies with excellent reputations. Opportunities for progression, training and career development. Immediate interviews and quick start dates available. Why Apply Through Workforce Manufacturing? At Workforce Manufacturing , we specialise in placing skilled engineering and manufacturing professionals into quality permanent positions across the Midlands. We take the time to understand your skills, experience and career goals, matching you with employers where you can genuinely build a long-term career not just find your next job. About Us We specialise in connecting skilled professionals with leading opportunities across the Engineering, Technical, and Manufacturing sectors. We support businesses in securing reliable, long-term talent while helping candidates find roles that match their skills and career goals.
Jul 23, 2026
Full time
MIG / TIG Welder Fabricator Location: Birmingham Pay: £16.00 - £19.00 per hour (DOE) Shift: Days Monday - Friday Job Type: Permanent Experienced MIG/TIG Welder Fabricator Looking for Your Next Opportunity? Workforce Manufacturing is partnering with several leading engineering and manufacturing businesses across Birmingham that are looking to strengthen their fabrication teams with skilled MIG/TIG Welder Fabricators . Whether your expertise is in stainless steel, mild steel, aluminium, or bespoke fabrication , we have a range of permanent opportunities with reputable employers offering competitive pay, modern workshops, and genuine long-term career prospects. The Role As a MIG/TIG Welder Fabricator, you'll be responsible for producing high-quality fabricated components from engineering drawings, ensuring all work meets the highest standards of workmanship and quality. Your duties may include: MIG and TIG welding on mild steel, stainless steel and aluminium. Fabricating and assembling bespoke products from technical drawings. Measuring, cutting, grinding and preparing materials. Working with a range of fabrication machinery and hand tools. Inspecting completed work to ensure excellent quality standards. Working independently and as part of an experienced fabrication team. Maintaining a safe and organised working environment. What We're Looking For We're keen to hear from candidates who have: Previous experience as a MIG Welder, TIG Welder, Welder Fabricator or Fabricator . The ability to confidently read and interpret engineering drawings. Experience producing high-quality fabrication work. Excellent attention to detail and pride in their workmanship. A full UK Driving Licence and access to their own transport. A valid CSCS Card (desirable but not essential). A positive attitude, reliability and a strong work ethic. What's in It for You? £16.00 - £19.00 per hour , depending on experience. Permanent, full-time employment. Monday to Friday day shifts enjoy your evenings and weekends. Overtime available with many employers. Clean, modern and well-equipped workshops. Stable companies with excellent reputations. Opportunities for progression, training and career development. Immediate interviews and quick start dates available. Why Apply Through Workforce Manufacturing? At Workforce Manufacturing , we specialise in placing skilled engineering and manufacturing professionals into quality permanent positions across the Midlands. We take the time to understand your skills, experience and career goals, matching you with employers where you can genuinely build a long-term career not just find your next job. About Us We specialise in connecting skilled professionals with leading opportunities across the Engineering, Technical, and Manufacturing sectors. We support businesses in securing reliable, long-term talent while helping candidates find roles that match their skills and career goals.
Global Recruitment Services Ltd
Burton-on-trent, Staffordshire
Our client is a provider of engineering services to a range of industry sectors including manufacturing and rail. This includes, welding and Inspection. Due to an increase in workload they are currently looking for an experienced Welder to be based in the East Midlands although the work could be nationwide on occasions. The work will include carrying out repairs and modifications on a range of items including rail rolling stock. Applicants must be experienced Welders with the ability to carry out MIG/MAG, TIG and Manual Metal Arc (Stick) or at least a combination of the above. A current coding would also be desirable. Previous experience of working with Aluminium and Stainless Steel is useful but not essential Located in the East Midlands This is an excellent opportunity to join an extremely busy well respected organisation.
Jul 22, 2026
Full time
Our client is a provider of engineering services to a range of industry sectors including manufacturing and rail. This includes, welding and Inspection. Due to an increase in workload they are currently looking for an experienced Welder to be based in the East Midlands although the work could be nationwide on occasions. The work will include carrying out repairs and modifications on a range of items including rail rolling stock. Applicants must be experienced Welders with the ability to carry out MIG/MAG, TIG and Manual Metal Arc (Stick) or at least a combination of the above. A current coding would also be desirable. Previous experience of working with Aluminium and Stainless Steel is useful but not essential Located in the East Midlands This is an excellent opportunity to join an extremely busy well respected organisation.
