Oceaneering
Aberdeen, Aberdeenshire
Job Description Perform thorough examinations of cranes and lifting equipment in accordance with applicable legislative standards, company procedures and client procedures where applicable. The competent Inspector shall have the practical & theoretical knowledge to perform thorough examination of lifting equipment and have the ability to identify defects / weaknesses and assess their importance in relation to the safety and continued use of the equipment. Senior Lifting Equipment Inspector is expected to lead inspection scopes and supervise a team of less experienced inspectors in both onshore and offshore environments. Responsibilities Inspection & thorough examination of lifting equipment accordance with statutory requirements, Oceaneering operating procedures and client specifications / requirements. Make decisions for inspection results within the limits of their competence Liaise with client focal point & onshore management to communicate all aspects of the inspection scope. Work within and operate Oceaneering documented procedures and database in a capable manner. Ensure inspection is carried out within the parameters of the applicable specification. Produce a clear and concise report detailing the methods used, results of the inspection, and all findings noting any limitations / test restrictions as applicable. Carry out work in a timely and efficient manner to meet deadlines, changing priorities when the situation requires. Provide feedback or improvement suggestions for C&L process and procedures Training and mentoring less experienced inspectors and assist with on-site monitoring / development. Assist with witness assessments & Peer assessment of personnel. Identify training / competency requirements and support ongoing workforce development. Carry out all work in accordance with the Company Health, Safety, Environmental and Quality Systems. Support HSE audits, assessments, incident investigations, and the close-out of corrective actions and improvement actions. The list of job duties is not exclusive or exhaustive and the post holder will be required to undertake tasks that may reasonably be expected within the scope of the post. Ensure that the Safety policies and procedures are understood and adhered to in order to ensure a safe working environment. Carry out task-based risk assessments, operate within the confines of client safe systems of work, deliver toolbox talks and Take II to the work party, and ensure all members of the team fully understand their roles and responsibilities. Ensure inspection is carried out within the parameters of the applicable specification. Ensure that work area is safe to carry out activities. Prior to packing any returned equipment check labelling is accurate, and all equipment has been verified. Required Qualifications OGUK Medical Minimum Industry Safety Training (MIST) Basic Offshore Safety Induction and Emergency Training (BOSIET) Compressed Air Emergency Breathing System (CAEBS) Bi-Deltoid Shoulder Measurement Minimum of 5 years' experience in lifting equipment examination scopes. LEEA Foundation Course IRATA Rope Access Level 1 MPI - SNT or PCN Level 2 Eye Test Flexible approach, team player with strong communication skills (written and verbal) Confident in written and spoken English IT literate with good understanding of Microsoft Office (Word, Excel, Visio etc.) Note: Alternative qualifications may be accepted upon review by the C&L Technical / Deputy Technical Manager Desired LEEA Diploma qualification(s) or equivalents IRATA Rope Access Level 2 or 3 Professionally Registered for Engineering Technician. Wire rope socketing trained Crane Inspection trained Proficient in the use of Motion Kinetic software. Qualified in additional Non-Destructive Testing (NDT) techniques. (ECI, UT DPI) Knowledge of legislation, standards, codes of practice and guidance application to the inspection scopes. Ability to detect and categorise defects, types of defects, defect acceptance criteria, and knowledge of failure modes within their capability and competence. Making decisions within the limits of own competence with the maturity to seek advice and technical support, as required. Note: lesser qualifications may be accepted provided exceptional experience can be demonstrated. About Us Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, material handling, aerospace, science, and renewable energy industries. About The Team Oceaneering Integrity Management and Digital Solutions (IMDS) delivers capability, safety, and reliability. We help our customers make informed decisions and manage risk associated with their oil and gas, renewables, and maritime assets-any time, any place. Customers are confident that when they choose us, we will respond with the safe, green, efficient, and cost-effective solutions and services they require.
Job Description Perform thorough examinations of cranes and lifting equipment in accordance with applicable legislative standards, company procedures and client procedures where applicable. The competent Inspector shall have the practical & theoretical knowledge to perform thorough examination of lifting equipment and have the ability to identify defects / weaknesses and assess their importance in relation to the safety and continued use of the equipment. Senior Lifting Equipment Inspector is expected to lead inspection scopes and supervise a team of less experienced inspectors in both onshore and offshore environments. Responsibilities Inspection & thorough examination of lifting equipment accordance with statutory requirements, Oceaneering operating procedures and client specifications / requirements. Make decisions for inspection results within the limits of their competence Liaise with client focal point & onshore management to communicate all aspects of the inspection scope. Work within and operate Oceaneering documented procedures and database in a capable manner. Ensure inspection is carried out within the parameters of the applicable specification. Produce a clear and concise report detailing the methods used, results of the inspection, and all findings noting any limitations / test restrictions as applicable. Carry out work in a timely and efficient manner to meet deadlines, changing priorities when the situation requires. Provide feedback or improvement suggestions for C&L process and procedures Training and mentoring less experienced inspectors and assist with on-site monitoring / development. Assist with witness assessments & Peer assessment of personnel. Identify training / competency requirements and support ongoing workforce development. Carry out all work in accordance with the Company Health, Safety, Environmental and Quality Systems. Support HSE audits, assessments, incident investigations, and the close-out of corrective actions and improvement actions. The list of job duties is not exclusive or exhaustive and the post holder will be required to undertake tasks that may reasonably be expected within the scope of the post. Ensure that the Safety policies and procedures are understood and adhered to in order to ensure a safe working environment. Carry out task-based risk assessments, operate within the confines of client safe systems of work, deliver toolbox talks and Take II to the work party, and ensure all members of the team fully understand their roles and responsibilities. Ensure inspection is carried out within the parameters of the applicable specification. Ensure that work area is safe to carry out activities. Prior to packing any returned equipment check labelling is accurate, and all equipment has been verified. Required Qualifications OGUK Medical Minimum Industry Safety Training (MIST) Basic Offshore Safety Induction and Emergency Training (BOSIET) Compressed Air Emergency Breathing System (CAEBS) Bi-Deltoid Shoulder Measurement Minimum of 5 years' experience in lifting equipment examination scopes. LEEA Foundation Course IRATA Rope Access Level 1 MPI - SNT or PCN Level 2 Eye Test Flexible approach, team player with strong communication skills (written and verbal) Confident in written and spoken English IT literate with good understanding of Microsoft Office (Word, Excel, Visio etc.) Note: Alternative qualifications may be accepted upon review by the C&L Technical / Deputy Technical Manager Desired LEEA Diploma qualification(s) or equivalents IRATA Rope Access Level 2 or 3 Professionally Registered for Engineering Technician. Wire rope socketing trained Crane Inspection trained Proficient in the use of Motion Kinetic software. Qualified in additional Non-Destructive Testing (NDT) techniques. (ECI, UT DPI) Knowledge of legislation, standards, codes of practice and guidance application to the inspection scopes. Ability to detect and categorise defects, types of defects, defect acceptance criteria, and knowledge of failure modes within their capability and competence. Making decisions within the limits of own competence with the maturity to seek advice and technical support, as required. Note: lesser qualifications may be accepted provided exceptional experience can be demonstrated. About Us Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, material handling, aerospace, science, and renewable energy industries. About The Team Oceaneering Integrity Management and Digital Solutions (IMDS) delivers capability, safety, and reliability. We help our customers make informed decisions and manage risk associated with their oil and gas, renewables, and maritime assets-any time, any place. Customers are confident that when they choose us, we will respond with the safe, green, efficient, and cost-effective solutions and services they require.
Shieldai
The Systems Engineer, Autonomy & Software at Shield AI is responsible for solving complex systems engineering challenges associated with the development, integration, and deployment of advanced autonomous systems for defense applications. This role sits at the intersection of systems engineering, software engineering, and autonomy. The Systems Engineer works across multidisciplinary engineering teams to translate mission and customer needs into system requirements, architectures, interfaces, and verification strategies while maintaining a deep technical understanding of the software and autonomy capabilities being delivered. The ideal candidate has a strong background in software and autonomy, is comfortable developing and debugging software in C++ and Python, and has significant experience applying systems engineering principles within complex defense programs. They should be equally comfortable working at the system level and diving into technical implementation when required. Responsibilities Apply systems engineering principles to the development and integration of autonomous systems for defense applications. Translate operational needs, mission objectives, and customer requirements into clear system, subsystem, software, and autonomy requirements. Develop and maintain system architectures, functional decompositions, interface definitions, Interface Control Documents, requirements traceability, and verification strategies. Work closely with autonomy, software, guidance, navigation and control, avionics, hardware, test, and platform engineering teams to ensure successful system integration. Define and manage interfaces between Hivemind Autonomy, vehicle systems, mission systems, sensors, communications, payloads, and external systems. Maintain a strong understanding of the underlying autonomy and software architecture, including how system level requirements translate into software behavior and implementation. Develop software, prototypes, analysis tools, test infrastructure, and engineering utilities using C++ and Python when required to solve integration and system level engineering problems. Use code, simulation, logs, telemetry, and other engineering data to investigate system behavior, diagnose failures, validate assumptions, and support technical decision making. Lead and support system integration activities across simulation, software in the loop, hardware in the loop, ground test, and flight test environments. Qualifications BS or MS in Computer Science, Software Engineering, Electrical Engineering, Aerospace Engineering, Systems Engineering, Robotics, or a related technical discipline. 5+ years of experience developing, integrating, or delivering complex software intensive systems, preferably within aerospace, defense, robotics, or autonomous systems. Strong software engineering background with hands on experience developing and debugging software in C++ and Python. Experience with autonomous or robotic systems, including familiarity with areas such as perception, planning, estimation, guidance, navigation, controls, or mission autonomy. Strong understanding of systems engineering principles and their application to complex defense systems. Experience developing and managing system and subsystem requirements, including requirements decomposition, allocation, traceability, and verification. Experience developing system architectures, functional architectures, interface definitions, Interface Control Documents, and other system level engineering artifacts.
The Systems Engineer, Autonomy & Software at Shield AI is responsible for solving complex systems engineering challenges associated with the development, integration, and deployment of advanced autonomous systems for defense applications. This role sits at the intersection of systems engineering, software engineering, and autonomy. The Systems Engineer works across multidisciplinary engineering teams to translate mission and customer needs into system requirements, architectures, interfaces, and verification strategies while maintaining a deep technical understanding of the software and autonomy capabilities being delivered. The ideal candidate has a strong background in software and autonomy, is comfortable developing and debugging software in C++ and Python, and has significant experience applying systems engineering principles within complex defense programs. They should be equally comfortable working at the system level and diving into technical implementation when required. Responsibilities Apply systems engineering principles to the development and integration of autonomous systems for defense applications. Translate operational needs, mission objectives, and customer requirements into clear system, subsystem, software, and autonomy requirements. Develop and maintain system architectures, functional decompositions, interface definitions, Interface Control Documents, requirements traceability, and verification strategies. Work closely with autonomy, software, guidance, navigation and control, avionics, hardware, test, and platform engineering teams to ensure successful system integration. Define and manage interfaces between Hivemind Autonomy, vehicle systems, mission systems, sensors, communications, payloads, and external systems. Maintain a strong understanding of the underlying autonomy and software architecture, including how system level requirements translate into software behavior and implementation. Develop software, prototypes, analysis tools, test infrastructure, and engineering utilities using C++ and Python when required to solve integration and system level engineering problems. Use code, simulation, logs, telemetry, and other engineering data to investigate system behavior, diagnose failures, validate assumptions, and support technical decision making. Lead and support system integration activities across simulation, software in the loop, hardware in the loop, ground test, and flight test environments. Qualifications BS or MS in Computer Science, Software Engineering, Electrical Engineering, Aerospace Engineering, Systems Engineering, Robotics, or a related technical discipline. 5+ years of experience developing, integrating, or delivering complex software intensive systems, preferably within aerospace, defense, robotics, or autonomous systems. Strong software engineering background with hands on experience developing and debugging software in C++ and Python. Experience with autonomous or robotic systems, including familiarity with areas such as perception, planning, estimation, guidance, navigation, controls, or mission autonomy. Strong understanding of systems engineering principles and their application to complex defense systems. Experience developing and managing system and subsystem requirements, including requirements decomposition, allocation, traceability, and verification. Experience developing system architectures, functional architectures, interface definitions, Interface Control Documents, and other system level engineering artifacts.