8 jobs found

Senior RF Engineer Edinburgh 12-month contract Paying up to 80p/h (Inside IR35) The Opportunity Our client is looking for Senior RF Engineers to join a leading defence technology organisation developing cutting-edge radar systems for modern fighter aircraft, as well as advanced maritime and airborne surveillance platforms. Key Responsibilities As an RF/Microwave Engineer, you will: Support the full hardware lifecycle from system concept through design, prototyping, test, verification, integration and production support. Develop high-quality RF PCB and module designs using modern microwave technologies. Create test prototypes to validate and verify designs. Carry out detailed design activities from requirements capture through to verification. Produce and maintain clear technical documentation and reports under configuration management. Prepare manufacturing data packs and support subcontractors and manufacturing teams. Work closely with systems, electronics and test engineers to resolve complex integration challenges. Participate in and support design reviews and lifecycle management activities. Essential Skills & Experience A degree in Electrical & Electronic Engineering (BSc, BEng, MEng, MSc, PhD, EngD) is preferred, although closely related disciplines such as Physics will also be considered. Microwave PCB materials and RF design techniques RF/Microwave subsystem design Microwave design tools (e.g. AWR, ADS, SystemVue, MATLAB) EM simulation techniques (2D/3D), e.g. CST GaAs/GaN MMIC design and applications RF synthesiser design (DDS and PLL technologies) RF downconverter and digitiser design Passive microwave structure design Non-linear circuit simulation PCB schematic capture tools (e.g. Mentor) RF laboratory measurements (signal generators, spectrum analysers, vector network analysers) Requirements capture and technical report writing Design for manufacture and cost Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

At Capgemini Engineering, the world leader in engineering services, we bring together a global team of engineers, scientists, and architects to help the world's mostinnovative companies unleash their potential. From autonomous cars to life-saving robots, our digital and software technology experts think outside the box as theyprovide unique R&D and engineering services across all industries. Join us for a career full of opportunities. Where you can make a difference. Where no two days arethe same. Your role The ideal candidate will have had experience in designing RF (L band and above) Test Systems and have extensive knowledge of the following: System Design Microwave Test Hardware (Network Analysers and Spectrum Analysers in particular) Microwave theory Software System Build & Integration Validation In this role you will play a key role in: Design, Integration, Validation and Documentation of RF Test Systems solutions; this role shall include all efforts required to deliver the test & control solution, including all hardware aspects where applicable and coordination of these disciplines where appropriate. Ensures that the developed solution is developed and produced within the relevant issued quality processes. Liaise with Project Responsible Engineer to achieve successful project milestone reviews with associated document inputs. Responsible for maintaining the solution and for providing support through the project operations phase (with the support of the Test Operations organisation). To provide responses/advice with respect to test hardware related occurrence reports and non-conformance raised. Supports the weekly and monthly reporting to the project team and to the department management team. Reporting to both Project management and the RF Test Systems Team Lead Your profile HND in Electronic Engineering with relevant similar industry experience. Graduate in Electrical / RF Engineering; Aerospace; Electrical manufacture and design. Good analytical skills and methodical approach to problem resolution and investigations. Good communication and team working skills. Able to present technical data to peers and project managers in a coherent manner Able to negotiate with multi team If you're excited about this role but don't meet every requirement, we still encourage you to apply, your unique experience could be just what we need. What you'll love about working here Well-being hub and different wellbeing initiatives Possibility to work up to 45 days per year from abroad. Open access to digital learning platforms Active employee networks promoting diversity, equity and inclusion like OutFront, CapAbility or Capgemini is proud to be a Disability Confident Employer (Level 2) under the UK Government's Disability Confident scheme. As part of our commitment to inclusive recruitment, we will offer an interview to all candidates who: Declare they have a disability, and Meet the minimum essential criteria for the role. Please opt in during the application process. Need to know All roles will require a level of security clearance; BPSS OR Security Clearance OR Developed Vetting. You can bring your whole self to work. At Capgemini building an inclusive future is part of everyday life and will be part of your working reality. We have built a representative and welcoming environment, for everyone. Capgemini is a global business and technology transformation partner, helping organizations to accelerate their dual transition to a digital and sustainable world, while creating tangible impact for enterprises and society. It is a responsible and diverse group of 340,000 team members in more than 50 countries. With its strong over 55-year heritage, Capgemini is trusted by its clients to unlock the value of technology to address the entire breadth of their business needs. It delivers end-to-end services and solutions leveraging strengths from strategy and design to engineering, all fueled by its market leading capabilities in AI, generative AI, cloud and data, combined with its deep industry expertise and partner ecosystem. Share this page with yourself or people you know Similar job opportunities If this job isn't the right fit for you, explore other opportunities! When you join Capgemini, you don't just start a new job. You become part of something bigger. Learn about how the recruitment process works - how to apply, where to follow your application, and next steps. To help you bring out the best of yourself during the interview process, we've got some great interview tips to share before the big day.

Role: Mechanical Design Engineer Start Date: ASAP Location: Newmarket Hours: Monday to Friday, 08:30 - 17:00 (early finish Friday) Pay: 45,000 - 60,000 (DOE) Contract: 12-Month Fixed Term (potential to go permanent) A respected manufacturer in Newmarket is seeking a Mechanical Design Engineer to support a growing portfolio of RF and microwave projects. Working alongside antenna, mechanical and production engineers, you'll be involved across the full product lifecycle, from requirements capture and simulation through to prototyping, testing and production handover. Applicants must have access to their own vehicle. With on-site manufacturing, you'll see your designs move from concept to build, supporting high-spec antenna solutions across demanding applications. Why Join? Private Medical Insurance Pension scheme Full employee benefits package (pro-rata) Strong opportunity to move into a permanent role Involvement in end-to-end product development Supportive, collaborative engineering team Salary & Hours: 45,000 - 60,000 per annum (DOE) 12-month FTC with permanent potential Monday-Thursday: 08:30 - 17:00 Early finish Friday What You'll Be Doing: Designing antenna and RF products (0.5 GHz - 40 GHz) Simulation work using CST Microwave Studio Supporting full development cycle from concept to production Testing using RF equipment (VNA, Spectrum Analysers) Requirements analysis and technical documentation Supporting PCB design and test facility improvements What We're Looking For: Degree in Electronic Engineering (or related) - minimum HNC considered Minimum 1 year industry experience in antenna design Strong understanding of RF, electromagnetic and circuit theory Experience with electromagnetic solvers (CST preferred) Knowledge of microwave antenna types (omni, sector, directional, waveguide) Experience with RF test equipment and antenna test ranges desirable Self-motivated, proactive and able to work within a team If you're a Mechanical Design Engineer ready to contribute to innovative projects and grow within a respected manufacturer, apply now or contact Appointments for more information.

Senior Radio Systems Engineer Location: Greater Manchester Salary: £40,000 - £45,000 per year Contract: Full-time Mon-Fri (37.50 hours per week), Permanent Benefits: Medical Cash Plan Life Assurance Discounted Gym Membership Additional Benefits About the Role We are seeking an experienced Senior Radio Systems Engineer to join a growing communications engineering team. This role is ideal for a highly skilled radio engineer who enjoys working across system design, installation, commissioning, and technical oversight for large-scale radio communication projects across the UK and Europe. You will act as a senior technical point of contact for customers, support the Project Management Office, and play a key role in delivering complex radio systems to the highest standards. Key Responsibilities Installation & Commissioning Install cabling, mount antennas, and configure RF equipment Program and test Motorola systems Commission PMR, DMR, telemetry radio, and microwave infrastructure Preventive Maintenance Carry out PPMs across multiple sites Complete annual inspections and corrective actions Documentation & Reporting Record test results, configuration details, and asset information Upload reports, photos, and documentation to shared systems Collaboration & Support Work closely with the PMO and Technical Lead Coordinate with subcontractors for installation tasks Provide pre-sales support including surveys, system design, and specifications Deliver post?sales support including customer training Technical Duties Diagnose and repair radio equipment from hand portables to base stations Conduct full diagnostic testing using bench and portable test equipment Prepare H&S documentation to meet customer requirements Maintain high technical standards and support knowledge sharing within the team Participate in standby rotas when required General Responsibilities Ensure all documentation is completed accurately and on time Adhere to Health & Safety guidelines at all times Identify and support revenue generating opportunities Carry out any additional duties as required by management Key Outcomes Deliver exceptional service to all customers Ensure smooth handover of completed installations to the service team Strengthen the organisation s reputation through high quality engineering delivery Essential Skills & Experience Minimum 5 years experience in two way radio communications Strong knowledge of Motorola PMR, DMR, TETRA, telemetry, or microwave systems Understanding of IP technologies including routing, switching, and VoIP Experience with DAS (active and passive), VHF/UHF, and cellular systems Ability to detect and resolve RF interference and intermodulation issues Knowledge of 2G/3G/4G in?building coverage techniques EMF testing and ICNIRP compliance experience Proven project design and project management capability Competent in producing H&S documentation Able to work at heights and in confined spaces Willingness to travel across the UK and Europe Strong communication skills and a right?first?time approach Full UK driving licence and valid passport Ability to work independently and as part of a team Desirable Experience with LV electrical systems SCADA / Control & Automation knowledge Understanding of TCP/IP, MODBUS, Profibus, RS232 Experience with Trbonet, Windows Server, SQL Server RF over Fibre experience Duplexer, combiner, and filter tuning CCNA, PASMA, HNC Electrical/Electronics Benefits: Competitive salary Expenses paid Bonus Hybrid Full training and development 23 days Bank Holidays Pension Medical Cash Plan Life Insurance Discounted Gym Membership Career Development Staff events/ incentives Plus so much more . How to Apply: Send your CV to (url removed) Or call Helen on (phone number removed) This vacancy is being handled by Aspire Recruitment. Due to high application volumes, we will only contact you within 14 days if selected for interview. By applying, you agree to our Privacy Policy and consent to Aspire Recruitment keeping you informed about future opportunities.

Location: Saffron Walden (CB10) Duration: Permanent Hours: 9am - 5:30pm (Monday to Friday) Salary: 40-45k DoE Job Reference: 35915 Polytec are seeking a Senior PCB Design Engineer for our client based just outside Saffron Walden. You will play a key role in turning complex electronic designs into high-quality, manufacturable PCBs. Working within a multi-disciplinary team, you'll collaborate closely with world-class RF, digital, power and analogue engineers to deliver PCB designs efficiently and to a high standard. You will help maintain the technical edge by managing relationships with PCB CAD vendors and manufacturing partners, negotiating quality, costs and timescales and overseeing the release of board information to suppliers. This role goes beyond PCB layout-you will be expected to contribute to developing and leading PCB design capability, driving excellence across tools, processes and supplier engagements and reporting directly to the Director of Hardware. Please note this role is subject to UK eyes only Security Clearance. Responsibilities: - Generate manufacturable PCB designs from engineering schematics - Manage schematic and PCB footprint libraries, BoM scripting and manufacturing data-pack creation - Maintain and strengthen relationships with PCB CAD vendors, PCB manufacturers and associated technology suppliers - Negotiate stack-ups, supplier timescales and costs with PCB and build contractors - Take technical responsibility for PCB design, manufacturing quality and supplier deliverables - Ensure all outputs meet agreed schedules, specifications and ISO9001 quality standards - Conduct internal and external design reviews with clear, confident presentation skills - Uphold high professional standards and continuously drive improvements in design and delivery efficiency Requirements: - Essential: HNC/HND or degree in Electronic and Electrical Engineering - Essential: Minimum 5 years' experience in electronics hardware design and product development - Strong portfolio of completed PCB design projects - Experience with RF, microwave or millimetre-wave PCB design (highly desirable) - High proficiency in PCB design tools - Altium essential, Siemens PADS beneficial - Strong knowledge of SMT, DFA, DFM and IPC standards for high-reliability products - Good understanding of EMI/EMC requirements and best design practices - Experience collaborating closely with electronic and mechanical design teams - Ability to innovate and support engineers with complex design challenges - Confident communicator with strong supplier negotiation skills - Able to work independently, under pressure, with excellent organisational skills Please contact us as soon as possible for more details or apply below!

Our client, a leading organisation in the Defence & Security sector, is currently seeking a talented RF Design Engineer to join their Hampshire-based team and work on cutting-edge electronics that protect what matters most. Key Responsibilities: Design and develop RF and analogue circuits and systems from concept to implementation Conduct hands-on testing, troubleshooting, and performance optimisation Participate in design reviews and provide expert technical input Prepare high-quality technical documentation and reports Mentor junior engineers and provide guidance across projects Collaborate with project teams and stakeholders to deliver solutions on time and to specification Job Requirements: Bachelor's or Master's degree in Electronics Engineering (or equivalent) Proven experience in RF design engineering and circuit layout tools (e.g., Microwave Office, Altium) Experience designing solutions for low SWaP-C, harsh environments, and high-frequency applications (LF up to X Band) Familiarity with LNA, receiver design, high-power amplifiers, and radiation hazard analysis Strong problem-solving skills, technical leadership, and excellent communication Benefits: Be part of a stimulating, collaborative, and purpose-driven team Work on challenging projects with real impact on national security and defence Enjoy a competitive salary with flexible benefits covering health, wellbeing, savings, and lifestyle Thrive in a supportive, inclusive, and innovative environment that values your ideas Security requirements: Must be a British Citizen with eligibility to achieve SC and DV clearance Residency in the UK for at least 5 years (SC) and 10 years (DV) If you're ready to apply your RF expertise to projects that really matter, in a role that offers autonomy, challenge, and growth, we want to hear from you. Apply now to join our client's dynamic and talented team in Southampton.

Principal Test Equipment Engineer Edinburgh 12-month contract Paying up to 74p/h (inside IR35) Overview: As the Principal Test Equipment Engineer, you?ll work within a multi-disciplinary engineering environment, helping to deliver complex Automatic Test Equipment (ATE) systems and ensuring they meet the needs of both internal and external stakeholders. What You?ll Do Lead the creation and delivery of technical solutions within defined work packages, ensuring alignment with stakeholder requirements Develop and deploy test programs for ATE systems Integrate hardware and software test programs, including NI TestStand environments Design systems, interfaces, and cable assemblies Collaborate closely with IPT functions, production teams, and external customer stakeholders Provide expert guidance on tools, techniques, and best practices for test equipment design Resolve emerging technical issues, escalating complex risk,s and supporting mitigation strategies Build strong internal and external networks, promoting continuous improvement and best practice adoption Mentor, coach, and develop engineers across the wider team What You?ll Bring Proven experience developing technical solutions within multi-disciplinary engineering teams Integration experience using languages such as CVI, C, and C++ Experience integrating within NI TestStand environments LF/Digital and/or RF/microwave hardware integration experience Offsite or overseas test integration exposure Hands-on experience across the full hardware design lifecycle Understanding of product safety legislation Strong ability to capture and analyse stakeholder needs Excellent interpersonal and collaboration skills, with the ability to influence and adapt Experience working with a wide range of internal and external stakeholders, including customers and suppliers Demonstrated ability to coach and develop others Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.