Creative Testing Solutions, Inc.
Bedford, Bedfordshire
Quality Specialist I page is loaded Quality Specialist Ilocations: Dallas-Bedfordtime type: Full timeposted on: Posted 3 Days Agojob requisition id: JR102061# Job Description Summary Under general supervision, this position is responsible for applying standard procedures to ensure test results, including the quality of cGMP laboratory testing processes, are met for final approval and release to laboratory customers. Applies quality methodologies to ensure required outcomes. Job Description PRIMARY DUTIES AND RESPONSIBILITIES Duties and responsibilities regularly performed by and assigned to Quality Specialist levels I, II, and III: Reviews and approves quality control and verifications for the routine testing of biological samples. Ensures thorough test batch review and verifies that all source data meets quality attributes and cGMP regulation conformance prior to result reporting. Approves final test results for release to laboratory customers. Maintains accurate records and documentation as required by established procedures and good documentation practice regulations. Ensures donor, patient, and employee confidentiality. Supports the archival record organization and classification maintenance process. Ensures standard operating procedures (SOPs) are properly followed. Partners with personnel from various departments. Resolves routine problems by following SOPs and escalates as appropriate. Analyzes environmental monitoring. Assists with problem investigations and ensures any temperature and/or humidity issues are addressed. May review equipment re-qualifications and release instrumentation back into the production environment. May review and approve general laboratory equipment calibrations and verifications and ensure acceptance criteria are met. May review and approve critical testing reagents for use in production. Assists with lot changes as directed. May pack and ship supplies and/or specimens. Participates in performance improvement teams and training programs, as required. Assures quality customer service to all customers. Performs all assigned duties in compliance with internal SOPs and external regulations. Brings compliance issues to the attention of management. Maintains good attendance and punctuality per the absence policy. Performs all other duties, at the discretion of management, as assigned.Additional duties and responsibilities regularly performed by and assigned to Quality Specialist levels II and III: Maintains test batches and results in the laboratory information system. Completes constructive investigations and resolves batch review discrepancies. Serves as a resource for moderate complexity corrections and/or clarifications. Provides mentorship, guidance, and training to newer staff. Assists with internal and external audits. May coordinate data collection and evaluation of un-assayed control lots for release.Additional duties and responsibilities regularly performed by and assigned to Quality Specialist level IIIs: Performs responsibilities with minimal instruction for day-to-day operations. Provides advanced cross-departmental and/or cross-site support. Analyzes testing and QC data to identify and/or investigate trends. Resolves a wide range of complex quality and production problems to ensure test results meet all quality attributes prior to release. Assists with workflow coordination. Assists with establishing quality standards for new work practices as required. Assists with investigating and completing CAPA associated deviations. Maintains working knowledge of assay processes performed at the laboratory. May coordinate laboratory proficiency and blind sample challenges. REQUIRED QUALIFICATIONS Education: Bachelor's degree required. Experience: + Quality Specialist II: A minimum of 2 years of professional experience working in a cGMP regulated environment required. + Quality Specialist III: A minimum of 4 years of professional experience working in a cGMP regulated environment, To Include: previous training experience and comprehensive understanding of laboratory production processes required. PREFERRED QUALIFICATIONS Bachelor's in biology, chemistry, or other science related degree preferred. Previous experience with adult training concepts and their applications. Trainer Certification preferred. SKILLS AND ABILITIES Must possess the skills and abilities to successfully perform all assigned duties and responsibilities. Must possess strong critical thinking and problem-solving skills. Must be able to maintain confidentiality. Must have proficient computer skills. Must be knowledgeable in computer operation in a Windows environment and able to follow company procedures to resolve issues. Ability to work in a team environment and participate as an active team member. Must be able to understand, follow, and give precise written and verbal instructions, and perform all activities safely. Must be able to read and comprehend written procedures and instructions. PHYSICAL & TRAVEL REQUIREMENTS Lab work environment: Exposure to biological fluids with potential exposure to infectious organisms. Exposure to extreme cold ( -20 0 C), miscellaneous production chemicals, moving machinery and production equipment. Exposure to high levels of noise on the production floor. Personal protective equipment required such as protective eyewear, garments and gloves. Specific vision abilities required by this job include close vision, distance, color, peripheral vision, depth perception and the ability to adjust focus. Travel: < 5% 5+ hours per shift: Sitting, standing, handling, finger dexterity, pinching 3- 5 hours per shift: Lifting to 40 pounds Up to 3 hours per shift: Walking, climbing, bending, squatting, reaching above shoulders, reaching waist to shoulder, reaching knee to waist, reaching floor to knee, grasping items, carrying/move items up to 40 pounds INTERNAL ADVANCEMENT STATEMENT In order to be considered for advancement to the next Quality Specialist level, employees must possess the required qualifications, skills, and abilities as stated in the job description AND regularly demonstrate the qualities and behaviors commensurate with our CTS mission, vision, and values. The above statements are intended to describe the general nature and level of work performed by people assigned to this job. They are not intended to be an exhaustive list of responsibilities, duties, and skills required of personnel so classified. The job description reflects the general details considered necessary to describe the principal functions of the job identified and shall not necessarily be construed as a detailed description of all the work requirements that may be inherent in the job. Creative Testing Solutions is an Equal Opportunity Employer. Additional Job Details: Shift 3:Tuesday to Friday 7:00 PM to 5:30AMCreative Testing Solutions is an equal opportunity employer. EEO/Minorities/Females/Disabled/Veterans Our organization is an equal employment/affirmative action employer. If you need accommodation for any part of the employment process because of a medical condition or disability, please send an e-mail to to let us know the nature of your request. A representative will respond to accommodation requests within two business days. Please note that this email/phone number is for medical/disability accommodations only and any other inquiries will not receive a response.Please see the below information about applicant rights and our commitment to compliance:All candidates who receive a conditional written offer of employment will be required to undergo a pre-employment drug test in accordance with the Company's established guidelines.
Mar 15, 2026
Full time
Quality Specialist I page is loaded Quality Specialist Ilocations: Dallas-Bedfordtime type: Full timeposted on: Posted 3 Days Agojob requisition id: JR102061# Job Description Summary Under general supervision, this position is responsible for applying standard procedures to ensure test results, including the quality of cGMP laboratory testing processes, are met for final approval and release to laboratory customers. Applies quality methodologies to ensure required outcomes. Job Description PRIMARY DUTIES AND RESPONSIBILITIES Duties and responsibilities regularly performed by and assigned to Quality Specialist levels I, II, and III: Reviews and approves quality control and verifications for the routine testing of biological samples. Ensures thorough test batch review and verifies that all source data meets quality attributes and cGMP regulation conformance prior to result reporting. Approves final test results for release to laboratory customers. Maintains accurate records and documentation as required by established procedures and good documentation practice regulations. Ensures donor, patient, and employee confidentiality. Supports the archival record organization and classification maintenance process. Ensures standard operating procedures (SOPs) are properly followed. Partners with personnel from various departments. Resolves routine problems by following SOPs and escalates as appropriate. Analyzes environmental monitoring. Assists with problem investigations and ensures any temperature and/or humidity issues are addressed. May review equipment re-qualifications and release instrumentation back into the production environment. May review and approve general laboratory equipment calibrations and verifications and ensure acceptance criteria are met. May review and approve critical testing reagents for use in production. Assists with lot changes as directed. May pack and ship supplies and/or specimens. Participates in performance improvement teams and training programs, as required. Assures quality customer service to all customers. Performs all assigned duties in compliance with internal SOPs and external regulations. Brings compliance issues to the attention of management. Maintains good attendance and punctuality per the absence policy. Performs all other duties, at the discretion of management, as assigned.Additional duties and responsibilities regularly performed by and assigned to Quality Specialist levels II and III: Maintains test batches and results in the laboratory information system. Completes constructive investigations and resolves batch review discrepancies. Serves as a resource for moderate complexity corrections and/or clarifications. Provides mentorship, guidance, and training to newer staff. Assists with internal and external audits. May coordinate data collection and evaluation of un-assayed control lots for release.Additional duties and responsibilities regularly performed by and assigned to Quality Specialist level IIIs: Performs responsibilities with minimal instruction for day-to-day operations. Provides advanced cross-departmental and/or cross-site support. Analyzes testing and QC data to identify and/or investigate trends. Resolves a wide range of complex quality and production problems to ensure test results meet all quality attributes prior to release. Assists with workflow coordination. Assists with establishing quality standards for new work practices as required. Assists with investigating and completing CAPA associated deviations. Maintains working knowledge of assay processes performed at the laboratory. May coordinate laboratory proficiency and blind sample challenges. REQUIRED QUALIFICATIONS Education: Bachelor's degree required. Experience: + Quality Specialist II: A minimum of 2 years of professional experience working in a cGMP regulated environment required. + Quality Specialist III: A minimum of 4 years of professional experience working in a cGMP regulated environment, To Include: previous training experience and comprehensive understanding of laboratory production processes required. PREFERRED QUALIFICATIONS Bachelor's in biology, chemistry, or other science related degree preferred. Previous experience with adult training concepts and their applications. Trainer Certification preferred. SKILLS AND ABILITIES Must possess the skills and abilities to successfully perform all assigned duties and responsibilities. Must possess strong critical thinking and problem-solving skills. Must be able to maintain confidentiality. Must have proficient computer skills. Must be knowledgeable in computer operation in a Windows environment and able to follow company procedures to resolve issues. Ability to work in a team environment and participate as an active team member. Must be able to understand, follow, and give precise written and verbal instructions, and perform all activities safely. Must be able to read and comprehend written procedures and instructions. PHYSICAL & TRAVEL REQUIREMENTS Lab work environment: Exposure to biological fluids with potential exposure to infectious organisms. Exposure to extreme cold ( -20 0 C), miscellaneous production chemicals, moving machinery and production equipment. Exposure to high levels of noise on the production floor. Personal protective equipment required such as protective eyewear, garments and gloves. Specific vision abilities required by this job include close vision, distance, color, peripheral vision, depth perception and the ability to adjust focus. Travel: < 5% 5+ hours per shift: Sitting, standing, handling, finger dexterity, pinching 3- 5 hours per shift: Lifting to 40 pounds Up to 3 hours per shift: Walking, climbing, bending, squatting, reaching above shoulders, reaching waist to shoulder, reaching knee to waist, reaching floor to knee, grasping items, carrying/move items up to 40 pounds INTERNAL ADVANCEMENT STATEMENT In order to be considered for advancement to the next Quality Specialist level, employees must possess the required qualifications, skills, and abilities as stated in the job description AND regularly demonstrate the qualities and behaviors commensurate with our CTS mission, vision, and values. The above statements are intended to describe the general nature and level of work performed by people assigned to this job. They are not intended to be an exhaustive list of responsibilities, duties, and skills required of personnel so classified. The job description reflects the general details considered necessary to describe the principal functions of the job identified and shall not necessarily be construed as a detailed description of all the work requirements that may be inherent in the job. Creative Testing Solutions is an Equal Opportunity Employer. Additional Job Details: Shift 3:Tuesday to Friday 7:00 PM to 5:30AMCreative Testing Solutions is an equal opportunity employer. EEO/Minorities/Females/Disabled/Veterans Our organization is an equal employment/affirmative action employer. If you need accommodation for any part of the employment process because of a medical condition or disability, please send an e-mail to to let us know the nature of your request. A representative will respond to accommodation requests within two business days. Please note that this email/phone number is for medical/disability accommodations only and any other inquiries will not receive a response.Please see the below information about applicant rights and our commitment to compliance:All candidates who receive a conditional written offer of employment will be required to undergo a pre-employment drug test in accordance with the Company's established guidelines.
Applications will be accepted beginning Wednesday, February 25, :00 AM (Central Standard Time) Physical Science/Physics Job Description TITLE: Teacher STATUS: Certified TERM OF SERVICE: 187 Days SUPERVISOR: Principal or Assistant Principal BASIC FUNCTION: This employee is responsible for instructional planning, management of behavior, delivery of instruction, and assessment of performance for all assigned students. ESSENTIAL DUTIES: INSTRUCTIONAL PLANNING: The teacher plans using the Mississippi College and Career Readiness Standards, the school district's curriculum, effective strategies, resources, and data to meet the needs of all students. Examples of meeting this performance expectation include, but not limited to: Guiding the learning process toward the achievement of curriculum goals and in harmony with the district goals, establishing clear objectives for all lessons, units, and projects and communicating these objectives to students. Planning for differentiated instruction. Planning units of instruction that are aligned with state standards and curriculum frameworks. Preparing for classes assigned and showing written evidence of preparation upon request of an immediate superior. Knowing the curriculum in its entirety for assigned grade level and participating in peer coaching, as needed. Researching and creating lessons that compliment/supplement the school's program and student academic needs. Using student data to guide planning. Developing appropriate short and long range plans and adapting, when needed. Planning instructional time for appropriate pacing, content mastery, and transitions. DELIVERY OF INSTRUCTION: Delivers Instruction that facilitates high levels of learning for all students. Examples of meeting this performance expectation include, but not limited to: Demonstrating a deep knowledge of the content and augmenting such in the form of remediation, intervention, and enrichment. Implementing students' IEPs and attend conferences, as needed. Using research based principles of effective teaching. Engaging and maintaining students in active learning. Differentiating instruction to meet students' needs. Communicating clearly and checking for understanding. Using instructional technology to enhance student learning. Developing, selecting, and modifying instructional plans and materials to meet the needs of all students. Maintaining appropriate records and following required procedures and practices. STUDENT ACADEMIC PROGRESS: The work of the teacher results in acceptable, measurable, and appropriate student academic progress. Examples of meeting this performance expectation include, but not limited to: Considering state content standards and assessments when planning classroom assessments. Using classroom assessment results to drive instruction and planning. Setting acceptable, measurable, and appropriate achievement goals for student academic progress based on baseline data. Documenting the progress of each student throughout the year. Serving as proctor for site-based proctored exams including all state testing whether the state test is being administered at the teacher's assigned school site, or at any school in the district. Grading student work and entering grades in the grade book(s) in a timely manner. Conducting progress reports at required intervals during the school year. Plans and implements systematic assessments. Providing evidence that achievement goals have been met, including the state-provided growth measure when available, as well as other multiple measures of student growth. PROFESSIONALISM: The teacher maintains a commitment to professional ethics, communicates effectively, and takes responsibility for and participates in professional growth that results in enhanced student learning. Examples of meeting this performance expectation include, but not limited to: Collaborating and communicating effectively within the school community to promote students' well-being and success. Adhering to federal and state laws, school policies, and ethical guidelines. Setting goals for improving knowledge and skills. Engaging in activities outside the classroom intended for school and student enhancement. Working in a collegial and collaborative manner with administrators, other school personnel, and the community as a whole. Building positive and professional relationships with parents/guardians through frequent and effective communication concerning students' progress. Serving as a contributing member of the school's Professional Learning Community through collaboration with colleagues. Demonstrating a consistent mastery of standard oral and written English in all communication and correspondence. PROFESSIONAL KNOWLEDGE: The teacher demonstrates an understanding of the curriculum, subject content, and the developmental needs of students by providing relevant learning experiences. Examples of meeting this performance expectation include, but not limited to: Effectively addressing appropriate learning standards. Integrating key content elements and facilitating students' use of higher order thinking skills in instruction. Demonstrating the ability to link present content with past and future learning experiences and real world experiences and applications. Demonstrating accurate knowledge of the subject matter. Demonstrating skills relevant to the subject area taught. Planning and basing instruction on goals that reflect high student expectations. Demonstrating an understanding of the intellectual, social, emotional, and physical development of the age group. LEARNING ENVIRONMENT: The teacher uses resources, routines, and procedures to provide a respectful, positive, safe, student-centered environment that is conducive to learning. Examples of meeting this performance expectation include, but not limited to: Managing student behavior to provide productive learning opportunities for all students. Arranging the classroom to maximize learning while providing a safe environment. Maximizing instructional time and minimizing disruptions. Establishing a climate of trust, teamwork, and respect by being fair, nurturing, and trustworthy. Establishing clear expectations for student behavior. Establishing classroom rules and procedures, communicating such to all stakeholders, and enforcing such consistently and fairly. ASSESSMENT: The teacher systematically gathers, analyzes, and uses all relevant data to measure student academic progress, guide instructional content and delivery methods, and provide timely feedback to both students and parents throughout the school year. Examples of meeting this performance expectation include, but not limited to: Using pre-assessment data to develop expectations for students, to differentiate instruction, and document learning. Involving students in setting learning goals. Using a variety of assessment strategies and instruments that are valid and appropriate for the content and grade level of the student. Aligning student assessment with established curriculum standards and benchmarks. Using assessment tools for both formative and summative purposes and to inform, guide, and adjust students' learning. Using grading practices that report final mastery in relationship to content goals and objectives. Giving constructive and frequent feedback to students regarding their learning. Other duties as required GENERAL REQUIREMENTS: Satisfactory background check Aberdeen School District is an Equal Opportunity/Affirmative Action/Title IX Employer and Tobacco/Drug/Gun Free Work Place
Mar 15, 2026
Full time
Applications will be accepted beginning Wednesday, February 25, :00 AM (Central Standard Time) Physical Science/Physics Job Description TITLE: Teacher STATUS: Certified TERM OF SERVICE: 187 Days SUPERVISOR: Principal or Assistant Principal BASIC FUNCTION: This employee is responsible for instructional planning, management of behavior, delivery of instruction, and assessment of performance for all assigned students. ESSENTIAL DUTIES: INSTRUCTIONAL PLANNING: The teacher plans using the Mississippi College and Career Readiness Standards, the school district's curriculum, effective strategies, resources, and data to meet the needs of all students. Examples of meeting this performance expectation include, but not limited to: Guiding the learning process toward the achievement of curriculum goals and in harmony with the district goals, establishing clear objectives for all lessons, units, and projects and communicating these objectives to students. Planning for differentiated instruction. Planning units of instruction that are aligned with state standards and curriculum frameworks. Preparing for classes assigned and showing written evidence of preparation upon request of an immediate superior. Knowing the curriculum in its entirety for assigned grade level and participating in peer coaching, as needed. Researching and creating lessons that compliment/supplement the school's program and student academic needs. Using student data to guide planning. Developing appropriate short and long range plans and adapting, when needed. Planning instructional time for appropriate pacing, content mastery, and transitions. DELIVERY OF INSTRUCTION: Delivers Instruction that facilitates high levels of learning for all students. Examples of meeting this performance expectation include, but not limited to: Demonstrating a deep knowledge of the content and augmenting such in the form of remediation, intervention, and enrichment. Implementing students' IEPs and attend conferences, as needed. Using research based principles of effective teaching. Engaging and maintaining students in active learning. Differentiating instruction to meet students' needs. Communicating clearly and checking for understanding. Using instructional technology to enhance student learning. Developing, selecting, and modifying instructional plans and materials to meet the needs of all students. Maintaining appropriate records and following required procedures and practices. STUDENT ACADEMIC PROGRESS: The work of the teacher results in acceptable, measurable, and appropriate student academic progress. Examples of meeting this performance expectation include, but not limited to: Considering state content standards and assessments when planning classroom assessments. Using classroom assessment results to drive instruction and planning. Setting acceptable, measurable, and appropriate achievement goals for student academic progress based on baseline data. Documenting the progress of each student throughout the year. Serving as proctor for site-based proctored exams including all state testing whether the state test is being administered at the teacher's assigned school site, or at any school in the district. Grading student work and entering grades in the grade book(s) in a timely manner. Conducting progress reports at required intervals during the school year. Plans and implements systematic assessments. Providing evidence that achievement goals have been met, including the state-provided growth measure when available, as well as other multiple measures of student growth. PROFESSIONALISM: The teacher maintains a commitment to professional ethics, communicates effectively, and takes responsibility for and participates in professional growth that results in enhanced student learning. Examples of meeting this performance expectation include, but not limited to: Collaborating and communicating effectively within the school community to promote students' well-being and success. Adhering to federal and state laws, school policies, and ethical guidelines. Setting goals for improving knowledge and skills. Engaging in activities outside the classroom intended for school and student enhancement. Working in a collegial and collaborative manner with administrators, other school personnel, and the community as a whole. Building positive and professional relationships with parents/guardians through frequent and effective communication concerning students' progress. Serving as a contributing member of the school's Professional Learning Community through collaboration with colleagues. Demonstrating a consistent mastery of standard oral and written English in all communication and correspondence. PROFESSIONAL KNOWLEDGE: The teacher demonstrates an understanding of the curriculum, subject content, and the developmental needs of students by providing relevant learning experiences. Examples of meeting this performance expectation include, but not limited to: Effectively addressing appropriate learning standards. Integrating key content elements and facilitating students' use of higher order thinking skills in instruction. Demonstrating the ability to link present content with past and future learning experiences and real world experiences and applications. Demonstrating accurate knowledge of the subject matter. Demonstrating skills relevant to the subject area taught. Planning and basing instruction on goals that reflect high student expectations. Demonstrating an understanding of the intellectual, social, emotional, and physical development of the age group. LEARNING ENVIRONMENT: The teacher uses resources, routines, and procedures to provide a respectful, positive, safe, student-centered environment that is conducive to learning. Examples of meeting this performance expectation include, but not limited to: Managing student behavior to provide productive learning opportunities for all students. Arranging the classroom to maximize learning while providing a safe environment. Maximizing instructional time and minimizing disruptions. Establishing a climate of trust, teamwork, and respect by being fair, nurturing, and trustworthy. Establishing clear expectations for student behavior. Establishing classroom rules and procedures, communicating such to all stakeholders, and enforcing such consistently and fairly. ASSESSMENT: The teacher systematically gathers, analyzes, and uses all relevant data to measure student academic progress, guide instructional content and delivery methods, and provide timely feedback to both students and parents throughout the school year. Examples of meeting this performance expectation include, but not limited to: Using pre-assessment data to develop expectations for students, to differentiate instruction, and document learning. Involving students in setting learning goals. Using a variety of assessment strategies and instruments that are valid and appropriate for the content and grade level of the student. Aligning student assessment with established curriculum standards and benchmarks. Using assessment tools for both formative and summative purposes and to inform, guide, and adjust students' learning. Using grading practices that report final mastery in relationship to content goals and objectives. Giving constructive and frequent feedback to students regarding their learning. Other duties as required GENERAL REQUIREMENTS: Satisfactory background check Aberdeen School District is an Equal Opportunity/Affirmative Action/Title IX Employer and Tobacco/Drug/Gun Free Work Place
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
Mar 14, 2026
Full time
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
The Scientist is part of Broughton's Laboratory Operations team. Principally responsible for performing chemical analyses on customers' products within agreed deadlines and quality standards (GMP, ISO, UKAS). Responsibilities / Objectives Perform analytical testing on client products Adhere to study protocols Adhere to company policy and procedure e.g. Dignity at work, Health & Safety, ALCOA Record data in a timely and accurate manner Key tasks To perform chemical analysis to produce high-quality, compliant data for clients within the agreed timeframes. Preparation of reagents Preparation of samples and standards used in the testing Instrumental techniques to be employed include: HPLC, LC-MS GC-FID, GC-MS CETI-8 Maintaining the standards of housekeeping required in the laboratory Production of data in accordance with the Quality Management System Comply with the instructions given in test methods/study plans etc. Any deviation from these instructions should be documented and communicated directly to the line manager or study director/principal investigator for studies. Any other duties as required to fulfil business goals Qualifications and Education Requirements Good technical problem-solving skills - Essential Good verbal reasoning - Essential Competent with standard MS Office applications - Essential Strong individual contributor and team player - Essential Experience in statistical packages - Preferred Degree in Chemistry or equivalent. Industry experience preferred but not essential
Mar 11, 2026
Full time
The Scientist is part of Broughton's Laboratory Operations team. Principally responsible for performing chemical analyses on customers' products within agreed deadlines and quality standards (GMP, ISO, UKAS). Responsibilities / Objectives Perform analytical testing on client products Adhere to study protocols Adhere to company policy and procedure e.g. Dignity at work, Health & Safety, ALCOA Record data in a timely and accurate manner Key tasks To perform chemical analysis to produce high-quality, compliant data for clients within the agreed timeframes. Preparation of reagents Preparation of samples and standards used in the testing Instrumental techniques to be employed include: HPLC, LC-MS GC-FID, GC-MS CETI-8 Maintaining the standards of housekeeping required in the laboratory Production of data in accordance with the Quality Management System Comply with the instructions given in test methods/study plans etc. Any deviation from these instructions should be documented and communicated directly to the line manager or study director/principal investigator for studies. Any other duties as required to fulfil business goals Qualifications and Education Requirements Good technical problem-solving skills - Essential Good verbal reasoning - Essential Competent with standard MS Office applications - Essential Strong individual contributor and team player - Essential Experience in statistical packages - Preferred Degree in Chemistry or equivalent. Industry experience preferred but not essential
Stantec Consulting International Ltd.
Ashford, Kent
Step into a pivotal role at Stantec where your technical mastery meets the front lines of the challenges facing the water industry today. As a Principal Mechanical Engineer within our South of England Water team, you will be leading the design of mechanical systems that ensure water security and environmental resilience for water companies across the UK and Ireland. Whether you choose to base yourself in Brighton, Ashford, Kings Hill, or Southampton, you are joining a consultancy at the peak of its growth, offering you a high visibility platform to sharpen your expertise and lead complex, multi-million pound frameworks. This position is designed for a technical specialist who thrives on the intricate details of the entire asset lifecycle. You will own the process from initial feasibility studies and rigorous optioneering through to the precision of detailed design and on site construction support. Your day to day will involve conducting deep dive site surveys and investigations to ensure our engineering solutions are both innovative and robust. You will find yourself at the heart of cutting edge mechanical design, solving unique efficiency challenges that directly impact our local communities. Beyond the technical drafting and specification, this role serves as a cornerstone for professional development and mentorship. You will act as the primary technical conduit between project managers, supply chain partners, and contractors, ensuring that sophisticated mechanical requirements are translated into successful, real world outcomes. As you guide less experienced engineers through the nuances of the water business, you will find a clear and supported path for your own career progression. At Stantec, your growth is fuelled by a collaborative culture and the opportunity to leave a tangible, sustainable legacy across the UK's water infrastructure. For more information on our Water teams, please see Stantec Water About You You will be an experienced Mechanical Engineer with a Degree in Mechanical Engineering or a related subject, ideally holding Chartership (or be on route to Chartership), with experience in mechanical design. Your experience will include producing technical outputs such as design specifications, sizing & designing pumping systems & aeration systems, schedules, reports and familiar with collaborative planning reviews and designs of solutions. You will be able to provide engineering input design outputs in collaboration with other disciplines, such as General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams. Finally, experience of mentoring junior engineers or managing a Mechanical team will be advantageous, though not essential to the role. Why Join us? Our People Culture: We're a close knit team and very proud of our friendly and collaborative environment Awards: Stantec were awarded the International Consulting Firm of the Year and Best place to work - Large Consulting Firms at the NCE awards as well as being consistently recognised in the top 10 Corporate Knights most sustainable companies in the world. Great Benefits: Competitive salary, pension plan, holidays, free private medical insurance, discounted gym membership and lots more. Flexible working arrangements Industry leading training and development as well as paid for professional subscriptions To hear what some of our employees say about life at Stantec, please click on My Stantec Stories About Stantec The Stantec community unites more than 34,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities. Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities. Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. Building an inspired, inclusive work environment that attracts, supports, and develops world class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn't exactly align, we encourage you to apply. At Stantec we want you to perform your best at every stage of the recruitment process and are committed to ensuring it is accessible to all. If you need any support or require adjustments to be made then please contact and we will talk to you about how we can support you. ReqID: 8397
Mar 10, 2026
Full time
Step into a pivotal role at Stantec where your technical mastery meets the front lines of the challenges facing the water industry today. As a Principal Mechanical Engineer within our South of England Water team, you will be leading the design of mechanical systems that ensure water security and environmental resilience for water companies across the UK and Ireland. Whether you choose to base yourself in Brighton, Ashford, Kings Hill, or Southampton, you are joining a consultancy at the peak of its growth, offering you a high visibility platform to sharpen your expertise and lead complex, multi-million pound frameworks. This position is designed for a technical specialist who thrives on the intricate details of the entire asset lifecycle. You will own the process from initial feasibility studies and rigorous optioneering through to the precision of detailed design and on site construction support. Your day to day will involve conducting deep dive site surveys and investigations to ensure our engineering solutions are both innovative and robust. You will find yourself at the heart of cutting edge mechanical design, solving unique efficiency challenges that directly impact our local communities. Beyond the technical drafting and specification, this role serves as a cornerstone for professional development and mentorship. You will act as the primary technical conduit between project managers, supply chain partners, and contractors, ensuring that sophisticated mechanical requirements are translated into successful, real world outcomes. As you guide less experienced engineers through the nuances of the water business, you will find a clear and supported path for your own career progression. At Stantec, your growth is fuelled by a collaborative culture and the opportunity to leave a tangible, sustainable legacy across the UK's water infrastructure. For more information on our Water teams, please see Stantec Water About You You will be an experienced Mechanical Engineer with a Degree in Mechanical Engineering or a related subject, ideally holding Chartership (or be on route to Chartership), with experience in mechanical design. Your experience will include producing technical outputs such as design specifications, sizing & designing pumping systems & aeration systems, schedules, reports and familiar with collaborative planning reviews and designs of solutions. You will be able to provide engineering input design outputs in collaboration with other disciplines, such as General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams. Finally, experience of mentoring junior engineers or managing a Mechanical team will be advantageous, though not essential to the role. Why Join us? Our People Culture: We're a close knit team and very proud of our friendly and collaborative environment Awards: Stantec were awarded the International Consulting Firm of the Year and Best place to work - Large Consulting Firms at the NCE awards as well as being consistently recognised in the top 10 Corporate Knights most sustainable companies in the world. Great Benefits: Competitive salary, pension plan, holidays, free private medical insurance, discounted gym membership and lots more. Flexible working arrangements Industry leading training and development as well as paid for professional subscriptions To hear what some of our employees say about life at Stantec, please click on My Stantec Stories About Stantec The Stantec community unites more than 34,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities. Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities. Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. Building an inspired, inclusive work environment that attracts, supports, and develops world class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn't exactly align, we encourage you to apply. At Stantec we want you to perform your best at every stage of the recruitment process and are committed to ensuring it is accessible to all. If you need any support or require adjustments to be made then please contact and we will talk to you about how we can support you. ReqID: 8397
Job Purpose The post holder will be based at the Cancer Research UK-Scotland Institute (CRUK-SI) in Glasgow , working with Principal Investigator, Dr Stephen Carter, and in collaboration with Prof. Martin Bushell at the CRUK-SI. CRUK-SI is one of the world's leading cancer research centres. It supports cutting edge discovery research into the molecular mechanisms of cancer development. This ambitious project is funded by a UKRI Future Leaders Fellowship (FLF), initially for 18 months with a potential for a three year extension, and focuses on investigating the architecture of PML bodies and other nuclear condensates. We are looking to recruit a structural or cellular biologist to develop and apply ultrastructural methodologies at the heart of this project using cryo electron tomography (cryo ET) combined with cryogenic correlated light and electron microscopy (cryo CLEM) and cryo focused ion beam (cryo FIB) milling. This programme will involve state of the art imaging approaches to visualise molecular details of the intricate relationships between chromatin and nuclear condensates. The successful candidate will be trained in how to apply cryo ET coupled with fluorescence to map key functional proteins and contribute to the study of the molecular mechanisms governing the assembly, composition and function of PML bodies and other nuclear condensates. The ideal candidate will have experience in molecular biology, cryo EM sample preparation techniques, processing skills of cryo tomograms, and be self motivated in designing and executing cryo ET experiments. The Cancer Research UK Scotland Institute has access to instrumentation in the Scottish Centre for Macromolecular Imaging (SCMI) , such as the JEOL CRYO ARM 300 electron microscope, Leica EM GP2, a cryo FIB instrument with a Quorum transfer stage, and the Leica THUNDER Imager EM cryo CLEM microscope. This technology will allow the candidate to develop their skills to target events that happen deep in the cell so we can see more of the molecular mechanisms that drive the formation, maintenance and disruption of PML bodies and other nuclear condensates. Main Duties and Responsibilities Collaborate with colleagues and participate in team/group meetings/seminars/workshops with our CRUK SI colleagues, the MRC University of Glasgow Centre for Virus Research (CVR), and the wider community. Plan and conduct assigned research individually or jointly in accordance with the project deliverables and the research strategy of the CRUK SI. Document research output including analysis and interpretation of all data, maintaining records and databases, drafting technical/progress reports and papers as appropriate. Develop and enhance your research profile and reputation and that of the CRUK SI, including contributing to publications of international quality in high profile refereed journals, enhancing the research impact in terms of economic/societal benefit, and gathering indicators of esteem. Contribute to the presentation of work at international and national conferences, at internal and external seminars, colloquia and workshops to develop and enhance our research profile. Contribute to the identification of potential funding sources and to assist in the development of proposals to secure funding from internal and external bodies to support future research. Contribute to the organisation, supervision, mentoring and training of undergraduate and/or postgraduate students and less experienced members of the project team to ensure their effective development. Perform administrative tasks related to the activities of the research group and CRUK SI, including budgets/expenditure. Carry out modest teaching activities (e.g. demonstrating) and associated administration as assigned in consultation with the Principal Investigator. Keep up to date with current knowledge and recent advances in the field/discipline. Engage in continuing professional development activities as appropriate. Undertake any other reasonable duties as required by the Principal Investigator. Contribute to the enhancement of the University's international profile in line with the University's Strategic Plan, World Changers Together. For Appointment at Grade 7 Perform the above duties with a higher degree of independence, leadership, and responsibility, particularly in relation to planning, funding, collaborating, and publishing research, and mentoring colleagues. Establish and sustain a track record of independent and joint published research to establish and maintain your expert reputation in the subject area. Survey the research literature and environment, understand the research challenges associated with the project and subject area, and develop/implement a suitable research strategy. Notice Please note that as part of your application you must address and demonstrate how you meet each of the essential/desirable criteria. If you do not address each criterion in the format explained below you will not be shortlisted for interview. Knowledge, Qualifications, Skills, and Experience Knowledge/Qualifications Essential A1: Scottish Credit and Qualification level 10 (Honours degree or equivalent) in a biological science or other relevant subject. May be working towards a post graduate qualification such as a Masters (Scottish Credit and Qualification Framework level 11). A2: (For Appointment at Grade 7) Normally Scottish Credit and Qualification Framework level 12 (PhD) in cell biology, structural biology or related field, such as X ray crystallography or NMR, or possess professional qualifications and experience equivalent to PhD level plus the requisite experience. Desirable B1: Working towards or completed a PhD in cell biology, structural biology or related field, such as X ray crystallography or NMR. B2: Qualifications received or pending from internationally renowned institutions/laboratories. Skills Essential C1: A strong background in cellular or structural biology data collection and image processing. C2: Research creativity and cross discipline collaborative ability. C3: Excellent interpersonal skills including team working and a collegiate approach. C4: Excellent communication skills (oral and written), including public presentation and the ability to communicate complex concepts clearly and concisely. C5: A high degree of competence in English scientific writing and speaking. C6: Appropriate workload/time/project/budget/people management skills. C7: IT and data analysis/interpretation skills. C8: Highly motivated, able to use initiative and quick to learn new techniques. C9: Creative, flexible and pragmatic approach to solving research problems. For Appointment at Grade 7 C10: Good team leadership skills including demonstrable supervisory skills. Desirable D1: Knowledge of cryo CLEM. D2: Knowledge of image segmenting within 3D volumes using Imaris or Amira. D3: Laboratory data handling and management skills; e.g. statistical analysis (Excel, R, Python, Prism etc). D4: Knowledge of applying artificial intelligence and/or machine learning approaches to biological image analysis or data interpretation. Experience Essential E1: Sufficient breadth and/or depth of knowledge in the specialist subject discipline and of research/teaching methods and techniques to work in cell and structural biology, demonstrated through relevant work experience. E2: Experience with IMOD, EMAN2, Relion 4, and ChimeraX. E3: Proven ability to deliver quality outputs (such as publications) in a timely and efficient manner. E4: Evidence of an emerging track record of publications in a relevant field. For Appointment at Grade 7 E5: Sufficient breadth and/or depth of knowledge in the specialist subject/discipline and of research/teaching methods and techniques to work within the subject area, as demonstrated through relevant post doctoral work experience including independence illustrated by identification of project objectives, design/analysis of experiments, and drafting of scientific publications. E6: Established publication track record in a relevant field of research, including at least one first author article in an appropriate impact international scientific journal. Desirable F1: Experience with culturing mammalian cells. F2: Experience with writing and implementing scripts using Python etc. F3: Experience with super resolution fluorescence microscopy and its application to cell biology. F4: An emerging national or international reputation. Informal enquiries Informal enquiries should be directed to Dr Stephen Carter Terms and Conditions Salary will be Grade 6/7, £33,951 - £37,694 / £41,064 - £46,049 per annum. This post is full time (35 hours per week) and has funding available until 1 August 2027. The University of Glasgow has a responsibility to ensure that all employees are eligible to live and work in the UK. If you require a Skilled Worker visa to work in the UK, you will be required to meet the eligibility requirements of the visa route to be assigned a Certificate of Sponsorship. Please note that this post may be eligible to be sponsored under the Skilled Worker visa route if tradeable points can be used under the Skilled Worker visa rules . click apply for full job details
Mar 09, 2026
Full time
Job Purpose The post holder will be based at the Cancer Research UK-Scotland Institute (CRUK-SI) in Glasgow , working with Principal Investigator, Dr Stephen Carter, and in collaboration with Prof. Martin Bushell at the CRUK-SI. CRUK-SI is one of the world's leading cancer research centres. It supports cutting edge discovery research into the molecular mechanisms of cancer development. This ambitious project is funded by a UKRI Future Leaders Fellowship (FLF), initially for 18 months with a potential for a three year extension, and focuses on investigating the architecture of PML bodies and other nuclear condensates. We are looking to recruit a structural or cellular biologist to develop and apply ultrastructural methodologies at the heart of this project using cryo electron tomography (cryo ET) combined with cryogenic correlated light and electron microscopy (cryo CLEM) and cryo focused ion beam (cryo FIB) milling. This programme will involve state of the art imaging approaches to visualise molecular details of the intricate relationships between chromatin and nuclear condensates. The successful candidate will be trained in how to apply cryo ET coupled with fluorescence to map key functional proteins and contribute to the study of the molecular mechanisms governing the assembly, composition and function of PML bodies and other nuclear condensates. The ideal candidate will have experience in molecular biology, cryo EM sample preparation techniques, processing skills of cryo tomograms, and be self motivated in designing and executing cryo ET experiments. The Cancer Research UK Scotland Institute has access to instrumentation in the Scottish Centre for Macromolecular Imaging (SCMI) , such as the JEOL CRYO ARM 300 electron microscope, Leica EM GP2, a cryo FIB instrument with a Quorum transfer stage, and the Leica THUNDER Imager EM cryo CLEM microscope. This technology will allow the candidate to develop their skills to target events that happen deep in the cell so we can see more of the molecular mechanisms that drive the formation, maintenance and disruption of PML bodies and other nuclear condensates. Main Duties and Responsibilities Collaborate with colleagues and participate in team/group meetings/seminars/workshops with our CRUK SI colleagues, the MRC University of Glasgow Centre for Virus Research (CVR), and the wider community. Plan and conduct assigned research individually or jointly in accordance with the project deliverables and the research strategy of the CRUK SI. Document research output including analysis and interpretation of all data, maintaining records and databases, drafting technical/progress reports and papers as appropriate. Develop and enhance your research profile and reputation and that of the CRUK SI, including contributing to publications of international quality in high profile refereed journals, enhancing the research impact in terms of economic/societal benefit, and gathering indicators of esteem. Contribute to the presentation of work at international and national conferences, at internal and external seminars, colloquia and workshops to develop and enhance our research profile. Contribute to the identification of potential funding sources and to assist in the development of proposals to secure funding from internal and external bodies to support future research. Contribute to the organisation, supervision, mentoring and training of undergraduate and/or postgraduate students and less experienced members of the project team to ensure their effective development. Perform administrative tasks related to the activities of the research group and CRUK SI, including budgets/expenditure. Carry out modest teaching activities (e.g. demonstrating) and associated administration as assigned in consultation with the Principal Investigator. Keep up to date with current knowledge and recent advances in the field/discipline. Engage in continuing professional development activities as appropriate. Undertake any other reasonable duties as required by the Principal Investigator. Contribute to the enhancement of the University's international profile in line with the University's Strategic Plan, World Changers Together. For Appointment at Grade 7 Perform the above duties with a higher degree of independence, leadership, and responsibility, particularly in relation to planning, funding, collaborating, and publishing research, and mentoring colleagues. Establish and sustain a track record of independent and joint published research to establish and maintain your expert reputation in the subject area. Survey the research literature and environment, understand the research challenges associated with the project and subject area, and develop/implement a suitable research strategy. Notice Please note that as part of your application you must address and demonstrate how you meet each of the essential/desirable criteria. If you do not address each criterion in the format explained below you will not be shortlisted for interview. Knowledge, Qualifications, Skills, and Experience Knowledge/Qualifications Essential A1: Scottish Credit and Qualification level 10 (Honours degree or equivalent) in a biological science or other relevant subject. May be working towards a post graduate qualification such as a Masters (Scottish Credit and Qualification Framework level 11). A2: (For Appointment at Grade 7) Normally Scottish Credit and Qualification Framework level 12 (PhD) in cell biology, structural biology or related field, such as X ray crystallography or NMR, or possess professional qualifications and experience equivalent to PhD level plus the requisite experience. Desirable B1: Working towards or completed a PhD in cell biology, structural biology or related field, such as X ray crystallography or NMR. B2: Qualifications received or pending from internationally renowned institutions/laboratories. Skills Essential C1: A strong background in cellular or structural biology data collection and image processing. C2: Research creativity and cross discipline collaborative ability. C3: Excellent interpersonal skills including team working and a collegiate approach. C4: Excellent communication skills (oral and written), including public presentation and the ability to communicate complex concepts clearly and concisely. C5: A high degree of competence in English scientific writing and speaking. C6: Appropriate workload/time/project/budget/people management skills. C7: IT and data analysis/interpretation skills. C8: Highly motivated, able to use initiative and quick to learn new techniques. C9: Creative, flexible and pragmatic approach to solving research problems. For Appointment at Grade 7 C10: Good team leadership skills including demonstrable supervisory skills. Desirable D1: Knowledge of cryo CLEM. D2: Knowledge of image segmenting within 3D volumes using Imaris or Amira. D3: Laboratory data handling and management skills; e.g. statistical analysis (Excel, R, Python, Prism etc). D4: Knowledge of applying artificial intelligence and/or machine learning approaches to biological image analysis or data interpretation. Experience Essential E1: Sufficient breadth and/or depth of knowledge in the specialist subject discipline and of research/teaching methods and techniques to work in cell and structural biology, demonstrated through relevant work experience. E2: Experience with IMOD, EMAN2, Relion 4, and ChimeraX. E3: Proven ability to deliver quality outputs (such as publications) in a timely and efficient manner. E4: Evidence of an emerging track record of publications in a relevant field. For Appointment at Grade 7 E5: Sufficient breadth and/or depth of knowledge in the specialist subject/discipline and of research/teaching methods and techniques to work within the subject area, as demonstrated through relevant post doctoral work experience including independence illustrated by identification of project objectives, design/analysis of experiments, and drafting of scientific publications. E6: Established publication track record in a relevant field of research, including at least one first author article in an appropriate impact international scientific journal. Desirable F1: Experience with culturing mammalian cells. F2: Experience with writing and implementing scripts using Python etc. F3: Experience with super resolution fluorescence microscopy and its application to cell biology. F4: An emerging national or international reputation. Informal enquiries Informal enquiries should be directed to Dr Stephen Carter Terms and Conditions Salary will be Grade 6/7, £33,951 - £37,694 / £41,064 - £46,049 per annum. This post is full time (35 hours per week) and has funding available until 1 August 2027. The University of Glasgow has a responsibility to ensure that all employees are eligible to live and work in the UK. If you require a Skilled Worker visa to work in the UK, you will be required to meet the eligibility requirements of the visa route to be assigned a Certificate of Sponsorship. Please note that this post may be eligible to be sponsored under the Skilled Worker visa route if tradeable points can be used under the Skilled Worker visa rules . click apply for full job details
Principal EC&I Engineer Warrington (3 days onsite) 12 months contract 63 to 81 per hour Umbrella, inside IR35 Must be eligible for Security Clearance The Opportunity A leading engineering organisation is looking to add an experienced Principal Electrical, Control & Instrumentation (EC&I) Engineer to its Warrington team on a long-term contract. This is a senior position offering the chance to take technical ownership across multiple projects, providing leadership and direction to deliver innovative, safe, and compliant engineering solutions. You'll be responsible for shaping design strategies, guiding a team of engineers, and ensuring that all project outputs meet the highest technical and safety standards. Role Responsibilities Develop and verify technical solutions, ensuring compliance with safety and quality standards Lead investigations and drive design improvements across projects Collaborate with internal teams, customers, and suppliers to manage specifications and delivery Support project execution and mentor junior engineers Promote engineering excellence, health and safety, and cultural change across the business Essential experience of the Electrical, Control and Instrumentation Engineer: Working collaboratively in multi-discipline teams across varied project types Communicating effectively with internal and external stakeholders Delivering systems input and providing post-installation or third-line technical support Liaising with customers and suppliers on-site for testing, installation, and commissioning Background in EC&I, Physics, or Radiometric, with experience in control systems and analogue/digital electronics Qualifications for the Electrical, Control and Instrumentation Engineer: Engineering degree (or equivalent) in electronics, control and instrumentation, or a related discipline Chartered Engineer status or actively working towards it Apply Now If you're an experienced Principal EC&I Engineer looking for your next long-term contract and the chance to lead on technically challenging work, I'd love to hear from you.
Mar 02, 2026
Contractor
Principal EC&I Engineer Warrington (3 days onsite) 12 months contract 63 to 81 per hour Umbrella, inside IR35 Must be eligible for Security Clearance The Opportunity A leading engineering organisation is looking to add an experienced Principal Electrical, Control & Instrumentation (EC&I) Engineer to its Warrington team on a long-term contract. This is a senior position offering the chance to take technical ownership across multiple projects, providing leadership and direction to deliver innovative, safe, and compliant engineering solutions. You'll be responsible for shaping design strategies, guiding a team of engineers, and ensuring that all project outputs meet the highest technical and safety standards. Role Responsibilities Develop and verify technical solutions, ensuring compliance with safety and quality standards Lead investigations and drive design improvements across projects Collaborate with internal teams, customers, and suppliers to manage specifications and delivery Support project execution and mentor junior engineers Promote engineering excellence, health and safety, and cultural change across the business Essential experience of the Electrical, Control and Instrumentation Engineer: Working collaboratively in multi-discipline teams across varied project types Communicating effectively with internal and external stakeholders Delivering systems input and providing post-installation or third-line technical support Liaising with customers and suppliers on-site for testing, installation, and commissioning Background in EC&I, Physics, or Radiometric, with experience in control systems and analogue/digital electronics Qualifications for the Electrical, Control and Instrumentation Engineer: Engineering degree (or equivalent) in electronics, control and instrumentation, or a related discipline Chartered Engineer status or actively working towards it Apply Now If you're an experienced Principal EC&I Engineer looking for your next long-term contract and the chance to lead on technically challenging work, I'd love to hear from you.
Babcock Mission Critical Services España SA.
Bristol, Gloucestershire
Principal Electrical, Control and Instrumentation Engineer Location: Bristol, GB, BS16 1EJ - Warrington, GB, WA3 6YD - Preston, GB, PR2 2YB - Carlisle, GB, CA24 3HZ - Leicester, GB, LE3 1UF - Reading, GB, RG14 2PZ - Hull, GB, HU13 0GD Onsite or Hybrid: Hybrid Job Title: Principal Electrical, Control and Instrumentation Engineer Location: Flexible + Hybrid Working Arrangements Compensation: Attractive Salary + Benefits Role Type: Full time / Permanent Role ID: SF69443 Shape the Future of Nuclear Engineering At Cavendish Nuclear we're working to create a safe and secure world, together, and if you join us, you can play your part as a Principal Electrical, Control and Instrumentation Engineer at any of our main UK locations, including Warrington (Cheshire), Bristol, Leicester, Humberside, Cumbria (Westlakes), Preston or Newbury. The role As a Principal Electrical, Control and Instrumentation Engineer, you'll have a role that is out of the ordinary. You'll lead the design and delivery of complex EC&I systems that underpin critical nuclear projects. This is your opportunity to make a tangible impact on energy security and national defence while advancing your career in a dynamic, highly regulated environment. Day to day, you'll be Leading the design and delivery of electrical, control and instrumentation systems for major nuclear projects. Providing technical guidance and mentoring to engineers within the team. Ensuring engineering solutions meet safety, quality, and regulatory standards. Collaborating with internal teams and external stakeholders to solve complex technical challenges. Overseeing project progress, supporting decision making, and contributing to strategic planning. This is a full time role, 37 hours per week. Hybrid working patterns are available, with three days on site. You will be based at any of our main UK locations, including Warrington (Cheshire), Bristol, Leicester, Humberside, Cumbria (Westlakes), Preston or Newbury. Essential experience of the Principal Electrical, Control and Instrumentation Engineer Proven experience leading the design and delivery of complex EC&I systems in regulated industries (e.g., nuclear, energy, defence). Strong understanding of safety standards, compliance, and technical governance. Ability to manage and mentor engineering teams across multi disciplinary projects. Experience working with control systems, PLCs, SCADA, and instrumentation technologies. Skilled in stakeholder engagement, including clients, regulators, and suppliers. Qualifications for the Principal Electrical, Control and Instrumentation Engineer Degree in Electrical, Control, or Instrumentation Engineering (or equivalent). Chartered Engineer status (or working towards) is highly desirable. Matched contribution pension scheme, with life assurance. Access to a Digital GP, annual health check, and nutritional consultations through Aviva DigiCare+. Employee share scheme. Employee shopping savings portal. Payment of Professional Fees. Reservists in the armed forces receive 10 days special paid leave. Holiday Trading is a benefit that allows UK Cavendish employees to buy additional leave or to sell up to one working week of annual leave from their annual entitlement. This Window opens February through to March annually. 'Be Kind Day' enables employees to take one working day's paid leave a year (or equivalent hours) to undertake volunteering work with their chosen organisation or registered charity. Excellent development opportunities and benefits package including an employee assistance programme supporting physical, mental and financial wellbeing. As a leader within the UK nuclear industry, Cavendish Nuclear, part of Babcock International Group, provides a comprehensive range of critical nuclear solutions in clean energy, defence and civil new build and decommissioning projects. Together, we're innovating to make nuclear safer, faster and cost effective across the nuclear energy life cycle. Your career with us could take you anywhere within Babcock International Group - from Canada, the USA to Japan. Work with us to create a safe and secure world, together. We are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the application and selection stages, please email with the subject header 'Reasonable adjustments requirement'. We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview. Job Segment: Nuclear Engineering, Instrumentation, Electrical, Electrical Engineering, Environmental Engineering, Engineering
Feb 27, 2026
Full time
Principal Electrical, Control and Instrumentation Engineer Location: Bristol, GB, BS16 1EJ - Warrington, GB, WA3 6YD - Preston, GB, PR2 2YB - Carlisle, GB, CA24 3HZ - Leicester, GB, LE3 1UF - Reading, GB, RG14 2PZ - Hull, GB, HU13 0GD Onsite or Hybrid: Hybrid Job Title: Principal Electrical, Control and Instrumentation Engineer Location: Flexible + Hybrid Working Arrangements Compensation: Attractive Salary + Benefits Role Type: Full time / Permanent Role ID: SF69443 Shape the Future of Nuclear Engineering At Cavendish Nuclear we're working to create a safe and secure world, together, and if you join us, you can play your part as a Principal Electrical, Control and Instrumentation Engineer at any of our main UK locations, including Warrington (Cheshire), Bristol, Leicester, Humberside, Cumbria (Westlakes), Preston or Newbury. The role As a Principal Electrical, Control and Instrumentation Engineer, you'll have a role that is out of the ordinary. You'll lead the design and delivery of complex EC&I systems that underpin critical nuclear projects. This is your opportunity to make a tangible impact on energy security and national defence while advancing your career in a dynamic, highly regulated environment. Day to day, you'll be Leading the design and delivery of electrical, control and instrumentation systems for major nuclear projects. Providing technical guidance and mentoring to engineers within the team. Ensuring engineering solutions meet safety, quality, and regulatory standards. Collaborating with internal teams and external stakeholders to solve complex technical challenges. Overseeing project progress, supporting decision making, and contributing to strategic planning. This is a full time role, 37 hours per week. Hybrid working patterns are available, with three days on site. You will be based at any of our main UK locations, including Warrington (Cheshire), Bristol, Leicester, Humberside, Cumbria (Westlakes), Preston or Newbury. Essential experience of the Principal Electrical, Control and Instrumentation Engineer Proven experience leading the design and delivery of complex EC&I systems in regulated industries (e.g., nuclear, energy, defence). Strong understanding of safety standards, compliance, and technical governance. Ability to manage and mentor engineering teams across multi disciplinary projects. Experience working with control systems, PLCs, SCADA, and instrumentation technologies. Skilled in stakeholder engagement, including clients, regulators, and suppliers. Qualifications for the Principal Electrical, Control and Instrumentation Engineer Degree in Electrical, Control, or Instrumentation Engineering (or equivalent). Chartered Engineer status (or working towards) is highly desirable. Matched contribution pension scheme, with life assurance. Access to a Digital GP, annual health check, and nutritional consultations through Aviva DigiCare+. Employee share scheme. Employee shopping savings portal. Payment of Professional Fees. Reservists in the armed forces receive 10 days special paid leave. Holiday Trading is a benefit that allows UK Cavendish employees to buy additional leave or to sell up to one working week of annual leave from their annual entitlement. This Window opens February through to March annually. 'Be Kind Day' enables employees to take one working day's paid leave a year (or equivalent hours) to undertake volunteering work with their chosen organisation or registered charity. Excellent development opportunities and benefits package including an employee assistance programme supporting physical, mental and financial wellbeing. As a leader within the UK nuclear industry, Cavendish Nuclear, part of Babcock International Group, provides a comprehensive range of critical nuclear solutions in clean energy, defence and civil new build and decommissioning projects. Together, we're innovating to make nuclear safer, faster and cost effective across the nuclear energy life cycle. Your career with us could take you anywhere within Babcock International Group - from Canada, the USA to Japan. Work with us to create a safe and secure world, together. We are a disability confident committed employer. If you have a disability or need any reasonable adjustments during the application and selection stages, please email with the subject header 'Reasonable adjustments requirement'. We're committed to building an inclusive culture where everyone's free to thrive. We are happy to talk about flexible working - please ask about alternative patterns of work at interview. Job Segment: Nuclear Engineering, Instrumentation, Electrical, Electrical Engineering, Environmental Engineering, Engineering
Redline Group Ltd
Flackwell Heath, Buckinghamshire
Are you looking for a fantastic Principal Software Engineer opportunity in High Wycombe? If so, my client is currently recruiting for a Principal Software Engineer to join their R&D site in High Wycombe, Buckinghamshire My client design and manufacture a range of products and systems focusing on Instrumentation, but you do need a strong background in embedded software and architecture. Main requirements for the Principal Software Engineer job will be: - You will be responsible for the software architecture for their products / systems. - You will have a strong Agile / Scrum background - Must have excellent C / C++ and C# programming skills. - Physics orientated background Responsibilities for the Principal Embedded Software Engineer job will include: - The role will be responsible for design and architecture of software for new and existing products. - This is a senior role requiring a design-to-launch product ownership and a system-wide perspective. - You will have software development skills sufficient to help drive the technology roadmap, author high level specifications and contribute to software delivery. - You will take on some hands-on software design work. But your broad role will be to own the architecture / vision for the product / system and ensure that what is designed fits the initial brief. So, you will provide technical leadership to the software team / group. But won't have any line management responsibility. This is a fantastic opportunity to join a world leader in their industry offering excellent career prospects and a great working environment. If you have any specific questions about this Principal Software Engineer in High Wycombe, Buckinghamshire please call Ricky Wilcocks on (phone number removed). To apply email (url removed)
Feb 27, 2026
Full time
Are you looking for a fantastic Principal Software Engineer opportunity in High Wycombe? If so, my client is currently recruiting for a Principal Software Engineer to join their R&D site in High Wycombe, Buckinghamshire My client design and manufacture a range of products and systems focusing on Instrumentation, but you do need a strong background in embedded software and architecture. Main requirements for the Principal Software Engineer job will be: - You will be responsible for the software architecture for their products / systems. - You will have a strong Agile / Scrum background - Must have excellent C / C++ and C# programming skills. - Physics orientated background Responsibilities for the Principal Embedded Software Engineer job will include: - The role will be responsible for design and architecture of software for new and existing products. - This is a senior role requiring a design-to-launch product ownership and a system-wide perspective. - You will have software development skills sufficient to help drive the technology roadmap, author high level specifications and contribute to software delivery. - You will take on some hands-on software design work. But your broad role will be to own the architecture / vision for the product / system and ensure that what is designed fits the initial brief. So, you will provide technical leadership to the software team / group. But won't have any line management responsibility. This is a fantastic opportunity to join a world leader in their industry offering excellent career prospects and a great working environment. If you have any specific questions about this Principal Software Engineer in High Wycombe, Buckinghamshire please call Ricky Wilcocks on (phone number removed). To apply email (url removed)
LTM Recruitment Specialists Ltd
Newcastle Upon Tyne, Tyne And Wear
My client, arguably one of the best companies in the sector, are an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking to employ an experienced Senior / Principal Engineer to be based in our NE office. You will have experience in the delivery of European data centres and mission-critical projects, along with other sector experience including process pharmaceutical, healthcare, commercial, labs and/or clean rooms would be desirable. Role Responsibilities • Responsible for the running of large projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical or Electrical installations, systems, equipment, facilities etc. (Several building types) • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys, tests, carries out dilapidation reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Ensures engineering calculations and drawings meet required robust industry and legal standards • Leads on the coordination of engineering services • Takes a holistic view in the selection and application of engineering concepts and solutions Role Requirements You will need to possess the following professional and technical expertise: • BSc/BEng or degree in appropriate engineering discipline or have sufficient equivalent experience • MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent • Working towards Chartered Eng status • Significant experience of specification design for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards/ UK Regulations/Codes • Ability to prioritise own workload • Ability to work to deadlines • Managerial skills • Presentation skills • Support the delivery of projects in accordance with the expectations of the Project Delivery Process from a Project Management, Financial Management, QA/QC and Technical Review perspective.
Feb 24, 2026
Full time
My client, arguably one of the best companies in the sector, are an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking to employ an experienced Senior / Principal Engineer to be based in our NE office. You will have experience in the delivery of European data centres and mission-critical projects, along with other sector experience including process pharmaceutical, healthcare, commercial, labs and/or clean rooms would be desirable. Role Responsibilities • Responsible for the running of large projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical or Electrical installations, systems, equipment, facilities etc. (Several building types) • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys, tests, carries out dilapidation reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Ensures engineering calculations and drawings meet required robust industry and legal standards • Leads on the coordination of engineering services • Takes a holistic view in the selection and application of engineering concepts and solutions Role Requirements You will need to possess the following professional and technical expertise: • BSc/BEng or degree in appropriate engineering discipline or have sufficient equivalent experience • MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent • Working towards Chartered Eng status • Significant experience of specification design for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards/ UK Regulations/Codes • Ability to prioritise own workload • Ability to work to deadlines • Managerial skills • Presentation skills • Support the delivery of projects in accordance with the expectations of the Project Delivery Process from a Project Management, Financial Management, QA/QC and Technical Review perspective.
LTM Recruitment Specialists Ltd
Newcastle Upon Tyne, Tyne And Wear
My client, one of the best companies in their sector is an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking for a experienced Senior or Principal Mechanical Engineer to be based in our Newcastle office with the ability to inspire others. You will have the ability to run medium sized projects, undertake a client facing role in the development, design and co-ordination of engineering projects. Skills should include experience on data centre and mission critical projects. Other sector experience including commercial, hotel, retail and hotel design desirable. Experience will also include the coordination of engineering project services, with a proven track record in project management. Your excellent communication and interpersonal skills, both with colleagues and clients, and experience working on innovative projects with leading client organisations, and contractors will equip you to take a future pro-active role in forging client relationships of our sector portfolio. You will possess good commercial awareness, in addition to having robust technical knowledge relevant to building services design, and capable of incorporating those technologies into the hotel and leisure sector. The position will ideally suit someone who is currently working in building service consultancy and is prepared to work hands on . The ideal candidate will be a Chartered Engineer or working towards, educated to degree level in Building Services Engineering or equivalent with a minimum of 5 years industry experience. Role Responsibilities • Responsible for running of medium size projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical installations, systems, equipment, facilities etc. • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys tests and reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Carries out engineering calculations to ensure drawings meet required robust industry and legal standards • Responsible for technical content and accuracy of Trainee, Graduates and Engineers • Validation and checking of designs and specifications Specific Skills & Knowledge • BEng, MSc, and have sufficient experience • MCIBSE/MIEE or HNC/HND + appropriate experience or equivalent • Working towards Chartered Eng status • Competent in specification design/drawing for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards • Ability to prioritise own workload • Ability to work to deadlines • Managerial Skills
Feb 24, 2026
Full time
My client, one of the best companies in their sector is an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking for a experienced Senior or Principal Mechanical Engineer to be based in our Newcastle office with the ability to inspire others. You will have the ability to run medium sized projects, undertake a client facing role in the development, design and co-ordination of engineering projects. Skills should include experience on data centre and mission critical projects. Other sector experience including commercial, hotel, retail and hotel design desirable. Experience will also include the coordination of engineering project services, with a proven track record in project management. Your excellent communication and interpersonal skills, both with colleagues and clients, and experience working on innovative projects with leading client organisations, and contractors will equip you to take a future pro-active role in forging client relationships of our sector portfolio. You will possess good commercial awareness, in addition to having robust technical knowledge relevant to building services design, and capable of incorporating those technologies into the hotel and leisure sector. The position will ideally suit someone who is currently working in building service consultancy and is prepared to work hands on . The ideal candidate will be a Chartered Engineer or working towards, educated to degree level in Building Services Engineering or equivalent with a minimum of 5 years industry experience. Role Responsibilities • Responsible for running of medium size projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical installations, systems, equipment, facilities etc. • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys tests and reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Carries out engineering calculations to ensure drawings meet required robust industry and legal standards • Responsible for technical content and accuracy of Trainee, Graduates and Engineers • Validation and checking of designs and specifications Specific Skills & Knowledge • BEng, MSc, and have sufficient experience • MCIBSE/MIEE or HNC/HND + appropriate experience or equivalent • Working towards Chartered Eng status • Competent in specification design/drawing for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards • Ability to prioritise own workload • Ability to work to deadlines • Managerial Skills
Stantec Consulting International Ltd.
Newcastle Upon Tyne, Tyne And Wear
Are you a passionate experienced Principal Electrical Design Engineer looking to take the next step in their career? Based from our offices in Redditch, Newcastle or Birmingham (with weekly travel to Redditch), we're recruiting a Principal Electrical Engineer to work across all voltage levels who are interested in being part of shaping the UK's energy transition and working across a wide range of projects including energy from waste, biomass, hydrogen, district heating, pump stations, hydropower, energy building design, protection systems, LVAC and more. For more info on our projects, hear what our team have to say here. As a Principal Electrical Engineer, you will play a key role in all aspects of projects, from feasibility studies and concept design to construction and commissioning. You will be responsible for leading the electrical design of projects, including generators, control and instrumentation systems. You will perform design, model and analyse electrical and electronic systems to ensure project feasibility and compliance with industry standards. You will provide technical guidance and mentorship to junior engineers and collaborate with civil, mechanical, and other engineering disciplines to ensure a fully integrated project design. This is an exciting opportunity for an engineer who is passionate about sustainable energy and eager to make a significant impact in the industry. About You You will be a Chartered or Incorporated Engineer status with the IET. Ideally you will have some experience in the Energy sector, although experience in other sectors such as water or buildings is useful also. You will have experience in producing and interpreting design drawings and documents including (to various levels of detail depending upon the project), single line diagrams, key line diagrams, block cable diagrams, calculations (e.g., for equipment sizing and fault ratings), load schedules, specifications and reports and be familiar with collaborative reviews and designs of solutions. You will have strong communication skills to give technical presentations to clients and other design engineers as well as inputting into collaborative design discussions including technical workshops. Most importantly, you will embody and support our values of client focus, designing with community in mind, collaboration and service excellence. Why Join us? Our People Culture: We're a close knit team and very proud of our friendly and collaborative environment Great Benefits: Competitive salary, pension plan, holidays, free private medical insurance, discounted gym membership and lots more. Flexible working arrangements Great Projects in all of our sectors across the UK Industry leading training and development as well as paid for professional subscriptions To hear what some of our employees say about life at Stantec, please click on My Stantec Stories About Stantec The Stantec community unites more than 34,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities. Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities. Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn't exactly align, we encourage you to apply. At Stantec we want you to perform your best at every stage of the recruitment process and are committed to ensuring it is accessible to all. If you need any support or require adjustments to be made then please contact and we will talk to you about how we can support you.
Feb 20, 2026
Full time
Are you a passionate experienced Principal Electrical Design Engineer looking to take the next step in their career? Based from our offices in Redditch, Newcastle or Birmingham (with weekly travel to Redditch), we're recruiting a Principal Electrical Engineer to work across all voltage levels who are interested in being part of shaping the UK's energy transition and working across a wide range of projects including energy from waste, biomass, hydrogen, district heating, pump stations, hydropower, energy building design, protection systems, LVAC and more. For more info on our projects, hear what our team have to say here. As a Principal Electrical Engineer, you will play a key role in all aspects of projects, from feasibility studies and concept design to construction and commissioning. You will be responsible for leading the electrical design of projects, including generators, control and instrumentation systems. You will perform design, model and analyse electrical and electronic systems to ensure project feasibility and compliance with industry standards. You will provide technical guidance and mentorship to junior engineers and collaborate with civil, mechanical, and other engineering disciplines to ensure a fully integrated project design. This is an exciting opportunity for an engineer who is passionate about sustainable energy and eager to make a significant impact in the industry. About You You will be a Chartered or Incorporated Engineer status with the IET. Ideally you will have some experience in the Energy sector, although experience in other sectors such as water or buildings is useful also. You will have experience in producing and interpreting design drawings and documents including (to various levels of detail depending upon the project), single line diagrams, key line diagrams, block cable diagrams, calculations (e.g., for equipment sizing and fault ratings), load schedules, specifications and reports and be familiar with collaborative reviews and designs of solutions. You will have strong communication skills to give technical presentations to clients and other design engineers as well as inputting into collaborative design discussions including technical workshops. Most importantly, you will embody and support our values of client focus, designing with community in mind, collaboration and service excellence. Why Join us? Our People Culture: We're a close knit team and very proud of our friendly and collaborative environment Great Benefits: Competitive salary, pension plan, holidays, free private medical insurance, discounted gym membership and lots more. Flexible working arrangements Great Projects in all of our sectors across the UK Industry leading training and development as well as paid for professional subscriptions To hear what some of our employees say about life at Stantec, please click on My Stantec Stories About Stantec The Stantec community unites more than 34,000 employees working in over 450 locations across 6 continents. We have been working with our clients and communities in the UK for over 150 years. We plan, design, deliver and manage the development and infrastructure needed to support the creation of sustainable, healthy and prosperous communities. Our teams provide effective and relevant solutions, translating our clients' vision into valued consents, deliverable plans for projects and programmes, and efficient designs for delivery, based on technical excellence and deep market insights. We deal with today's challenges, but also keep a fairer, better tomorrow in sight, looking at how we deliver clean growth, support radical changes in our economy and meet the needs of future communities. Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, colour, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with laws and regulations and ensures equitable opportunities in all aspects of employment. Building an inspired, inclusive work environment that attracts, supports, and develops world-class talent is a crucial key to our success. If you are excited by this role but worry that your experience doesn't exactly align, we encourage you to apply. At Stantec we want you to perform your best at every stage of the recruitment process and are committed to ensuring it is accessible to all. If you need any support or require adjustments to be made then please contact and we will talk to you about how we can support you.
Benefits Hello! Thanks for stopping by. Let us tell you about all the great reasons to join us here at Yorkshire Water: We offer a competitive salary, depending on experience, 4a, £50,797 - £65,123 A company car through company car lease scheme Annual incentive related bonus (£1000 maximum bonus opportunity for the performance year) Attractive pension scheme (up to 10% company contribution) Development opportunities in line with the Senior Project Engineer progression plan 25 days annual leave plus bank holidays - plus an extra wellness day! Life assurance cover of 4 times pensionable salary A great benefits package - choose from health cash plan scheme, critical illness insurance, dental insurance, life assurance flex and partner cover. Retail savings scheme Online GP service, cycle to work scheme, gym membership discounts and many more! Location and Work Type Location: Hybrid working with regular travel to Yorkshire Water sites and offices. Work type: Permanent. 37 hours per week, Monday - Friday. Role Overview We have an exciting opportunity for a Senior Project Engineer to join the Asset Delivery team at Yorkshire Water and be a part of helping Yorkshire Water to provide the best service to our customers. Could this be you? What we do: Everyone has an idea of what a water company does. Here in Yorkshire, we make sure that over 5.4 million people living in the region and the millions of people who visit our region each year, can rely on our services, and have clean and safe drinking water on tap and that their wastewater is taken away. But for us, it's so much more than this. We look after communities, protect the environment, and plan to look after Yorkshire's water, today, tomorrow 24/7, 365 days a year. We provide essential water and wastewater services to every corner of the Yorkshire region, and play a key role in the region's health, wellbeing, and prosperity. New environmental legislation, unprecedented levels of investment and changing expectations from customers means that this is an exciting time to discover opportunities within the water industry. Programme Delivery are a key part of how we plan to meet the changing expectations of customers and regulators. The Programme Delivery department is accountable for delivering the Capital Construction Programme. This is achieved by delivering intelligent Totex solutions, through collaboration, for sustainable out-performance. The Department is also accountable for commercial and contractual arrangements across the supply chain and to deliver leading and world class contract management processes. The purpose of the department is to achieve best value for money from our Capital Programme, by optimising our resources, monitoring and tracking the effectiveness and efficiency of our supply chain commercial arrangements, through: Reducing cycle time in the project delivery process; Maintaining, or enhance service; Embracing a collaborative approach through our supply chain; Working in a safe environment; Delivering out performance against targets identified in collaborative out performance plans. Specialist Projects is a stream within Programme Delivery led by Engineers from various disciplines. Undertaking the roles of Client, Principal Designer and Principal Contractor we manage the end to end design process and utilise a wide ranging supply chain to deliver engineering construction schemes across Clean Water, Waste Water and Networks. Where you fit in: As our Senior Project Engineer you will : Provide technical supervision and line management of a team of Project Technicians Technically manage and coordinate the design and safe delivery of engineered MEICA projects within the Specialist Projects portfolio Ensure that the delivery of all projects complies with the requirements of the CDM regulations undertaking the role of Principal Contractor and supporting the Client & Principal Designer Ensure adherence to YW Engineering specification and associated documentation Drive excellent standards and performance in health and safety, risk management and control of work to ensure compliance with the YW safety Policy Ensure that robust financial management and commercial awareness form the foundation of all business decisions What skills & qualifications you will need: ICA based apprenticeship or Engineering degree or equivalent ONC/HNC/BTEC in ICA Engineering Understands the principles of control of works - Permits, POWRA, RAMS etc Understands the major processes and the effects/role of MEICA equipment in this Has a broad experience with electrical and ICA equipment and can use this experience to produce engineered solutions to resolve business risks and other issues Has a thorough understanding and working knowledge of the CDM regulations and their practical application Has a good understanding of the design and project delivery process including hazard identification, risk assessment and site supervision Ability to respond/answer to a wide range of specific technical and non-technical detailed queries Understands and has experience of working to ATEX standards Applies formal SI & ICA project development and delivery procedures - ie URS, SRS, P&IDs, FDS, FAT, SAT & O&Ms Detailed knowledge and understanding of SI & ICA best practice and standards Experience of optimising SI control systems in a complex ICA technology landscape. You will also benefit from having: Experience working in a regulated utility or major asset management / delivery with a wide-ranging asset base Previous experience in a commercially orientated and or regulated environment Knowledge of the application of SI, Automation and Instrumentation technologies in a water utility environment. Understands and applies BS7671, BSEN 61511, BSEN 13849 and BSEN 62061 and other relevant legislation / standards Knowledge of Schneider PLC platform, Mitsubishi (IEC 61131) and Allen Bradley HMI/PLC systems and software and 'iFix' SCADA. Understand process safety activities and documentation ie; Engineering Risk Assessment/Safety Reviews, Working Environment We embrace a flexible working model, where our hybrid setup typically requires an average of 1 to 2 days in the office per week and working on our operational sites. This could be slightly more when collaborative efforts, training or meeting deadlines demand it. For those who prefer to work on-site, our office is open Monday-Friday during working hours. How to Apply If you're an experienced Senior Project Engineer professional and want to help us deliver exceptional service for our customers whilst protecting the environment, then apply today to find out what a career with Yorkshire Water can offer for you. If successful for the role, you will be required to undergo pre-employment checks that will include a Basic Disclosure Check, carried out through a Third-Party Company, prior to commencing employment. Depending on the role, you may also be required to go through the security vetting process for either a Counter Terrorist Check or Security Check clearance. All our roles are subject to a medical questionnaire, and further medicals when required. We are committed to removing barriers and ensuring our recruitment process is accessible to everyone. We offer a range of adjustments to make your application experience as comfortable and straightforward as possible. If you have an accessibility need, disability, or condition that requires changes to the recruitment process, please include this information in your application. We will then discuss any reasonable adjustments required. Kelda Group reserve the right to close this position before the published closing date, should the need occur. We therefore advise that you complete and submit your application as soon as possible. No agencies please What's in it for you? Career enhancement and development, colleague well-being and a genuinely positive work experience for all are key priorities. We are continuously evolving and improving our ways of working and you will support us in achieving our vision of 'taking responsibility for the water environment for good'. If you feel this opportunity is suitable and you match the skills required, then please apply on line and complete the application process. Kelda Group reserve the right to close this position before the published closing date, should the need occur. We therefore advise that you complete and submit your application as soon as possible. Kelda Group values equality, diversity and inclusion we believe that everyone should be treated with respect. We welcome applications from all individuals, regardless of gender, marital status, parental status, sexual orientation, race, colour, ethnic or national origin, disability, age, religion or belief and trade union membership.
Feb 19, 2026
Full time
Benefits Hello! Thanks for stopping by. Let us tell you about all the great reasons to join us here at Yorkshire Water: We offer a competitive salary, depending on experience, 4a, £50,797 - £65,123 A company car through company car lease scheme Annual incentive related bonus (£1000 maximum bonus opportunity for the performance year) Attractive pension scheme (up to 10% company contribution) Development opportunities in line with the Senior Project Engineer progression plan 25 days annual leave plus bank holidays - plus an extra wellness day! Life assurance cover of 4 times pensionable salary A great benefits package - choose from health cash plan scheme, critical illness insurance, dental insurance, life assurance flex and partner cover. Retail savings scheme Online GP service, cycle to work scheme, gym membership discounts and many more! Location and Work Type Location: Hybrid working with regular travel to Yorkshire Water sites and offices. Work type: Permanent. 37 hours per week, Monday - Friday. Role Overview We have an exciting opportunity for a Senior Project Engineer to join the Asset Delivery team at Yorkshire Water and be a part of helping Yorkshire Water to provide the best service to our customers. Could this be you? What we do: Everyone has an idea of what a water company does. Here in Yorkshire, we make sure that over 5.4 million people living in the region and the millions of people who visit our region each year, can rely on our services, and have clean and safe drinking water on tap and that their wastewater is taken away. But for us, it's so much more than this. We look after communities, protect the environment, and plan to look after Yorkshire's water, today, tomorrow 24/7, 365 days a year. We provide essential water and wastewater services to every corner of the Yorkshire region, and play a key role in the region's health, wellbeing, and prosperity. New environmental legislation, unprecedented levels of investment and changing expectations from customers means that this is an exciting time to discover opportunities within the water industry. Programme Delivery are a key part of how we plan to meet the changing expectations of customers and regulators. The Programme Delivery department is accountable for delivering the Capital Construction Programme. This is achieved by delivering intelligent Totex solutions, through collaboration, for sustainable out-performance. The Department is also accountable for commercial and contractual arrangements across the supply chain and to deliver leading and world class contract management processes. The purpose of the department is to achieve best value for money from our Capital Programme, by optimising our resources, monitoring and tracking the effectiveness and efficiency of our supply chain commercial arrangements, through: Reducing cycle time in the project delivery process; Maintaining, or enhance service; Embracing a collaborative approach through our supply chain; Working in a safe environment; Delivering out performance against targets identified in collaborative out performance plans. Specialist Projects is a stream within Programme Delivery led by Engineers from various disciplines. Undertaking the roles of Client, Principal Designer and Principal Contractor we manage the end to end design process and utilise a wide ranging supply chain to deliver engineering construction schemes across Clean Water, Waste Water and Networks. Where you fit in: As our Senior Project Engineer you will : Provide technical supervision and line management of a team of Project Technicians Technically manage and coordinate the design and safe delivery of engineered MEICA projects within the Specialist Projects portfolio Ensure that the delivery of all projects complies with the requirements of the CDM regulations undertaking the role of Principal Contractor and supporting the Client & Principal Designer Ensure adherence to YW Engineering specification and associated documentation Drive excellent standards and performance in health and safety, risk management and control of work to ensure compliance with the YW safety Policy Ensure that robust financial management and commercial awareness form the foundation of all business decisions What skills & qualifications you will need: ICA based apprenticeship or Engineering degree or equivalent ONC/HNC/BTEC in ICA Engineering Understands the principles of control of works - Permits, POWRA, RAMS etc Understands the major processes and the effects/role of MEICA equipment in this Has a broad experience with electrical and ICA equipment and can use this experience to produce engineered solutions to resolve business risks and other issues Has a thorough understanding and working knowledge of the CDM regulations and their practical application Has a good understanding of the design and project delivery process including hazard identification, risk assessment and site supervision Ability to respond/answer to a wide range of specific technical and non-technical detailed queries Understands and has experience of working to ATEX standards Applies formal SI & ICA project development and delivery procedures - ie URS, SRS, P&IDs, FDS, FAT, SAT & O&Ms Detailed knowledge and understanding of SI & ICA best practice and standards Experience of optimising SI control systems in a complex ICA technology landscape. You will also benefit from having: Experience working in a regulated utility or major asset management / delivery with a wide-ranging asset base Previous experience in a commercially orientated and or regulated environment Knowledge of the application of SI, Automation and Instrumentation technologies in a water utility environment. Understands and applies BS7671, BSEN 61511, BSEN 13849 and BSEN 62061 and other relevant legislation / standards Knowledge of Schneider PLC platform, Mitsubishi (IEC 61131) and Allen Bradley HMI/PLC systems and software and 'iFix' SCADA. Understand process safety activities and documentation ie; Engineering Risk Assessment/Safety Reviews, Working Environment We embrace a flexible working model, where our hybrid setup typically requires an average of 1 to 2 days in the office per week and working on our operational sites. This could be slightly more when collaborative efforts, training or meeting deadlines demand it. For those who prefer to work on-site, our office is open Monday-Friday during working hours. How to Apply If you're an experienced Senior Project Engineer professional and want to help us deliver exceptional service for our customers whilst protecting the environment, then apply today to find out what a career with Yorkshire Water can offer for you. If successful for the role, you will be required to undergo pre-employment checks that will include a Basic Disclosure Check, carried out through a Third-Party Company, prior to commencing employment. Depending on the role, you may also be required to go through the security vetting process for either a Counter Terrorist Check or Security Check clearance. All our roles are subject to a medical questionnaire, and further medicals when required. We are committed to removing barriers and ensuring our recruitment process is accessible to everyone. We offer a range of adjustments to make your application experience as comfortable and straightforward as possible. If you have an accessibility need, disability, or condition that requires changes to the recruitment process, please include this information in your application. We will then discuss any reasonable adjustments required. Kelda Group reserve the right to close this position before the published closing date, should the need occur. We therefore advise that you complete and submit your application as soon as possible. No agencies please What's in it for you? Career enhancement and development, colleague well-being and a genuinely positive work experience for all are key priorities. We are continuously evolving and improving our ways of working and you will support us in achieving our vision of 'taking responsibility for the water environment for good'. If you feel this opportunity is suitable and you match the skills required, then please apply on line and complete the application process. Kelda Group reserve the right to close this position before the published closing date, should the need occur. We therefore advise that you complete and submit your application as soon as possible. Kelda Group values equality, diversity and inclusion we believe that everyone should be treated with respect. We welcome applications from all individuals, regardless of gender, marital status, parental status, sexual orientation, race, colour, ethnic or national origin, disability, age, religion or belief and trade union membership.
