33 jobs found

Mechanical Maintenance Technician sought by a recycling facility in Runcorn. This subsidiary of an international, £multibillion turnover plastics manufacturer is focused on growing the circular economy and they see innovation within PVC recycling as pivotal to their global sustainability strategy. This is a permanent role on weekly rotating shifts, 6am to 2pm and 2pm to 10pm, known formally within the business as Mechanical Technician. The Role: As a Mechanical Maintenance Technician, you'll be working as part of a team on the installation, maintenance and troubleshooting of bearing replacements conveyor belts, motor gearbox replacements, electrical and instrumentation equipment in compliance with industry regulations, Health & Safety standards, and company procedures. Your duties will include: Carrying out mechanical tasks as part of a multifunctional team: bearing replacements conveyor belts, motor gearbox replacements Carrying out TPM tasks to ensure maximum OEE is achieved Participating in continuous improvement initiatives, identifying opportunities to enhance system reliability and efficiency Working closely with engineers, production teams and external contractors to ensure timely resolution of issues Following strict Health & Safety guidelines, conducting risk assessments and ensuring compliance with safe work practices Working as part of a team installing, calibrating and maintaining electrical and instrumentation systems including motors, sensors, actuators, PLCs and control panels Troubleshooting: diagnosing and repairing electrical and instrumentation faults on a variety of systems Performing routine testing, calibration and validation of instrumentation and control systems to ensure optimal performance Accurately maintaining records of all electrical and instrumentation work: maintenance logs, calibration reports, work orders and spare parts stores management Ensuring all work complies with relevant legislation, including Electricity at Work Regulations, IEE Wiring Regulations (BS 7671) and company policies Working on a shift pattern or 6am-2pm and 2pm-10pm, rotating on a weekly basis The successful Mechanical Maintenance Technician will demonstrate: NVQ Level 3 in Engineering or equivalent Strong mechanical engineering bias with some electrical experience Excellent communication skills Excellent problem-solving and diagnostic skills Ability to work independently and within a team Strong organisational skills and attention to detail Proficiency with electrical drawings and schematics The following skills and experience are desirable but not essential: 18th Edition IEE Wiring Regulations (BS 7671) City & Guilds 2391 (Inspection & Testing) or equivalent Demonstrable experience in an electrical and instrumentation role, across multiple sectors including manufacturing, industrial, energy, or related industries Strong knowledge of electrical systems, control systems, and instrumentation technologies Instrumentation certification COMPEX certification Experience working in hazardous environments (ATEX) Familiarity with DCS (Distributed Control Systems) Experience with PLCs, SCADA systems, and automation is advantageous Benefits: £41,671.61 including shift allowance and bonus - see below £36,683.28 base salary (£18.87 hourly rate) 10% shift allowance (after completing probation) £60 per month attendance bonus £50 per month production target bonus Time off in lieu Pension scheme Free flu jabs Health & wellbeing 32 days holidays including bank holidays, rising to 33 days after 2 years' service Option to buy and sell holiday Cycle to Work scheme Long service awards Company rewards platform Employee assistance programme Internal training academy Access to external training and supported education Social culture and events Mechanical Maintenance Technician Runcorn, Cheshire £41,671.61 (£36,683.% shift allowance £1,320 bonus) excellent benefits Mechanical Engineer Mechanical Technician Maintenance Technician Maintenance Engineer Mechanical Maintenance Multiskilled Multi Skilled Plant Engineer Plant Technician Electrical Engineer Electrical Maintenance Instrumentation Engineer

Maintenance Engineer (Multiskilled) Day Shift - Monday to Friday (07:00 to 3:30 with early Fri finish) £40,000 - £44,000 Bristol We have an exciting opportunity for an experienced Maintenance Engineer to join an industry leading manufacturer in Bristol? Small close nit team. Good retention. Fantastic hours. Fed up of shifts? This is for you. Finish at 3:30pm mon to thur with an early fri finish on top. A site where production and maintenance work together not against. This is a fantastic opportunity for an engineer who is ideally electrically biased looking for a long term days only role. This is what you'll be doing The Maintenance Engineer will play a crucial role in ensuring the smooth operation of the manufacturing facility. The primary responsibility includes conducting preventive and reactive maintenance on various equipment and machinery such as presses, vacuums, ovens, and control gear. Requirements Proven experience as a Maintenance Engineer in a manufacturing environment. Experience working with hydraulics Proven experience of mechanical and electrical fault finding of production equipment Relevant level 3 qual and 18 edition of wiring regulations preferred Excellent knowledge of health and safety practises Excellent problem-solving and communication skills Ideally experience of some installation project work And this is what you'll get in return. A salary of £40,000 - £44,000 + various other benefits and additional payments based on service and performance. 5% bonus Opportunity to be put on one in 4 call out rota where you are paid £100 standby + minimum of 3 hours for any call out Holiday of 29 days which increases with service Sickness pay after one years service Life assurance Company pension scheme You'll be joining a well-established business who value staff retention and is recognised for its growth across various markets. Are you up to the challenge? Are you what we're looking for? Please get in touch today with engineering specialist recruiter, Liam Reid. Please apply with a CV and feel free to include a cover letter outlining why you're perfect for the role. We also have a referral scheme so if you know of someone who would be great for the role please get in touch. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities.

Multiskilled Maintenance Engineer Location: Brose Ltd CV7 9NW, Exhall, Warwickshire Salary/Rate: Starting hourly rate is £21.99/hour but depending on experience can start on £24.09, Overtime Bonus and Shift Allowance, WeDoCare bonus Change perspective. Shape the future. Benefits: Employee Assistant Programme Access to Mental Health Counsellor Long Service Days Employee Recognition Career Progression ABB robotics training as standard. On and off-site training in multiple areas of maintenance disciplines Grading system enables clear progression within your job role Brose invests in new technologies and business areas for a successful future. Let s shape our future together. Are you ready for a career change? Then apply now for the following opening! Your tasks Maintain machinery in an orderly condition according to the Total Productive Maintenance (TPM) schedule. You ll be working with the latest state of the art equipment Carry out repairs to first line production equipment utilising our extensive spares. Collaborate with other departments and use machine downtime (OEE) data to identify and implement improvements for increased uptime Minimise the costs of maintenance by optimising the use of resources and implementing cost-effective solutions. Participate in the improvements of machine operation, production process, standards and company procedures. Engage in various project activities related to machinery upgrades, installations, and modifications. Provide technical advice when required. Mentoring of apprentices by sharing knowledge and best practice to develop their skills. Your Profile ONC/ HNC or Equivalent in Electromechanical/ Multiskilled or Engineering background Work experience in similar role Understanding of Production requirements, Advantageous in Siemens and TIA PLC programs but not essential To communicate effectively at all levels Have the ability to work under pressure and to tight deadlines Working Hours: There is vacanies on either rotational shift or permanent nightshift. Rotating Shifts (AM/PM): AM: Mon Thurs 06 00 Fri 06 10 PM: Mon Thurs 14 30 Fri 13 20 Permanent Night Shift: Sun 20 00 Mon Thurs 22 00 Are you ready to take the next step in your career, and take on new tasks? Then we are looking forward to receiving your application. If you have any questions, your HR contact person is happy to answer them. Please be aware that the position availability is determined by the ability of a prospective candidate having the right to work in the UK.

Global Workplace Solutions is a division of CBRE providing integrated solutions across large multi-discipline property portfolios. We are an organisation that has people at the heart of its culture and our aim for this account is to deliver an exceptional service to BT. Our BT Workplace team provide a full range of building maintenance services to their 7,000 buildings in the UK, from commercial offices and telephone exchanges to call centres and retail shops. We encourage new ways of working, driving innovation, whilst always living to our RISE values. Respect Integrity Service Excellence The role: Multiskilled Host Acting as the heart of the office, our Hosts anticipate customer needs and provide a 'hassle-free' workplace experience that's designed to make life easier and enhance our customers' well-being. Hosts deliver people-focused, anticipatory services in order to provide a cohesive and connected workplace experience for building occupants and visitors. Hosts will enhance the moments that matter throughout a colleague's working day. Our Hosts are the first point of contact when people enter the building, providing a warm welcome to colleagues and building visitors alike and being knowledgeable about the local area. They are at the forefront of delivering a positive office experience; being the first point-of-contact for building users throughout the day, acting as a liaison between the occupants and the wider workplace team for all building and housekeeping services to keep our client workspace running smoothly. Supporting colleagues in using meeting room technology, delivering engagement activities and games for wellbeing, ensuring consumables are stocked, and ensuring the building is reset so each day it looks like it did on 'day one'. At larger locations Hosts manage meetings and event spaces. From greeting guests to assisting with bookings, catering, AV and other event activities; Hosts ensure everything runs smoothly so our client can concentrate on enjoying their event. We ensure an exceptional workplace experience journey for our colleagues and clients alike. It's about detail, best practice, knowing what good looks like and then raising the bar. Key responsibilities are as follows: To deliver a best in class Front of House service to welcome clients, visitors, colleagues and business partners at all times. To plan and prioritise own work allocation according to the needs of the site as determined by your Line Manager Carry out daily building walks to ensure all floors are tidy, compliant and reset back to 'day one' and proactively manage any issues identified. This includes health, safety and security checks each day in alignment with the daily checklist. Act as the go to' for your floor neighbourhoods and see yourself as an extension of BT and promote their culture and values in everything you do. Provide proactive, innovative solutions and resolution of BT colleague issues and provide visible assistance when required. Activity planning and delivery to support BT colleague engagement Support the wider FM team, ensuring the site always remains compliant with current Health & Safety legislation Ensure all building communications are up to date and in line with company expectations and have relevant information always displayed Ensure that all requests made via the Facilities Helpdesk are entered on to the system in a timely manner and that completed jobs are updated through the CAFM systems within the contractual SLA Engage with other service partners, such as housekeeping and security to ensure prompt and effective request solutions and close out Provide Front of House / Reception services, work across and deliver services across different floors and support all meetings and events as required Provide basic housekeeping duties across your areas of work, including but not limited to: loading and unloading of dishwashers, general spot cleaning of highly utilised areas, meeting room and communal area resets and general upkeep of kitchen facilities. Ensure floor and kitchen consumables are monitored, ordered and re-stocked as and when required. Assist and co-ordinate with the in-house Engineering team to ensure all tasks are completed within SLA and to a quality standard Always promote and maintain the core values of CBRE Provide porterage and event set up support as and when required. Monitor and report as needed on building occupancy and utilization To provide any other administrative duties as required To ensure there is a pleasant and positive working environment for BT business colleagues with hosts who are available and accessible within the building To build relationships with clients and colleagues, ensuring they have everything they need for their working day and ensure all workplace facilities are maintained and inspected regularly. To be proactively visible in all areas of the building Deliver site inductions to new client colleagues and building users To communicate effectively and appropriately - using verbal and written channels in both a proactive and professional manner Utilise skills and knowledge to join/become a subject matter expert and/or champion to support with continuous improvement and innovations Person Specification: Previous experience in a customer-facing role is essential. Excellent communication and customer service skills with a high level of attention to detail. Ability to seek out opportunities for continuous improvement and portray vision, values and passion. Exceptional written and verbal communication skills Ability to successfully multitask and able to adjust tasks in accordance with changing deadlines and priorities in a high-pressured environment. Organised, independent and self-motivated, enthusiastic, dependable, detail-oriented, flexible in scheduling and prioritisation. Flexible approach to work Understands and appreciates the importance of using discretion at all times Does not let issues go; follows up on issues through to resolution. Our mission: To build a world-class business through exceptional service and exceptional people Why CBRE? Salary & Benefits: Enjoy a competitive salary with a comprehensive benefits programme, designed to make sure you feel valued in your role, with benefits that support the mental, physical, emotional and financial health for you and your family. Learning & Development: Access LinkedIn Learning from day one with over 16,000 courses available, grow through our internal career pathways an unlimited training support on Talent Coach. Values-Based Culture: We encourage new ways of working, driving innovation, whilst always living to our RISE values. Respect, Integrity, Service and Excellence. Positive Work Environment: Over 74% of our colleagues would recommend us as a great place to work, according to our latest internal engagement survey. Volunteering Days: Benefit from 2 paid volunteering days per year. Exclusive Discounts: Nuffield gym memberships and restaurant discount cards At CBRE, we value diversity and believe that everyone is extraordinary in their own way. We are an inclusive employer. Even if you are not sure you fit all the requirements for a particular role, we'd still love to hear from you. There may be another opportunity within CBRE that is more suitable for you now or in the future.

Multiskilled Maintenance Engineer (Electrical Bias) Location: Kent Salary: Up to 47,000 Shift Pattern: Three shift rotation The Opportunity We are recruiting an Electrically Biased Maintenance Engineer to join an established onsite engineering team within a fast paced industrial environment. Reporting to the Engineering Manager, you will be responsible for supporting all maintenance activities across production and site infrastructure. This is a hands on role where strong electrical faultfinding skills are essential. Key Responsibilities Reactive and planned maintenance (PPM) on production and site equipment Electrical and mechanical fault finding and repair Reading and interpreting electrical drawings and schematics Using test equipment including multimeters confidently Ensure all maintenance tasks comply with site Health & Safety procedures Complete PPMs on time and feedback improvements to the maintenance system Work closely with engineers on opposite shifts to ensure clear handovers Support continuous improvement initiatives Communicate clearly with production and engineering teams Report incidents, nearmisses, and safety concerns in line with procedures Shift Pattern (Rotating) Week 1 & 2: Monday-Friday: 06:00-14:00 Plus either Saturday or Sunday: 06:00-14:00 (flexible) Week 3 & 4: Monday-Friday: 14:00-22:00 Week 5 & 6: Monday-Thursday or Tuesday-Friday: 22:00-06:00 Skills & Experience Required Electrical bias essential C&G / NVQ Level 3 minimum (overseas qualifications accepted with NARIC) Strong electrical fault?finding capability Ability to read wiring diagrams and schematics Confident using electrical test equipment Experience in an industrial or manufacturing maintenance environment Good verbal and written English Desirable Apprenticeship trained Mechanical maintenance / fabrication experience Electrical Installation & Maintenance background Electronic fault finding to component level Knowledge of pneumatics, hydraulics, or steam systems 18th Edition Please apply below if you're interested.

Sprinkler Service Engineer London/South East Salary to 45,000 + OT + Company Van + Fuel Card (OTE 60K to 65K) The Client They are a leading provider of innovative fire safety solutions, specializing in the design, installation, and maintenance of advanced fire detection and suppression systems. With a commitment to safeguarding lives and property, the company delivers tailored, high-quality services across various sectors, ensuring compliance with stringent safety standards. Their expert team leverages cutting-edge technology to offer reliable, efficient, and discreet fire protection solutions that blend seamlessly into any environment. This role would suit a Service Engineer, Multiskilled Engineer, Commercial Sprinkler Engineer, Sprinkler Service Maintenance Engineer. They are growing our service department, who cover clients nationwide and pride ourselves on excellent service and delivery, after installation servicing is key to keeping our clients systems fully compliant and operational. Whether it is special risk, detection or any sprinkler system, we provide service and maintenance of systems combined with 24/7 emergency call-out. Responsibilities Must have experience in servicing all types of the following valve sets - Wet, dry, alternate, deluge and pre-Action. Must be able to carry out 5-point flow tests on sprinkler fire pumps and general service checks. Sprinkler Installation Level 2 qualified would be desirable but not essential. Plumbing / Piping Knowledge & fault finding on sprinkler systems - essential. Previous experience gained within Commercial / Industrial buildings environment. Experienced in small works install. Understanding and exposure to reporting electronically. Full driving licence DBS check Flexible approach to working hours and location, as will cover large area of the UK Ability to work unsupervised or in a team Professional, pleasant attitude and smart in appearance, capable of communicating diplomatically to strengthen customer relationships. Polite communication skills and ability to know when to escalate problems IT literate as all jobs are booked on tablets Ability to problem solve and use own initiative when on site Be punctual and reliable Provide an excellent customer experience What you will receive from the company Competitive salary, including overtime and callouts Life Insurance Company Vehicle Mobile Phone Fuel Card Work Tablet This role would suit a Service Engineer, Multiskilled Engineer, Commercial Sprinkler Engineer, Sprinkler Service Maintenance Engineer For information on the role please call Giles Churchill - Director - Fire at Amida Solution on (phone number removed). I am available to book calls in from 8am to 8pm Mon to Fri & Weekends.

ASRS (Automated Storage Retrieval System) Technician 2 (Multiskilled) - Wakefield Permanent - Full time Shift Pattern: 7 pm- 7am (3 Days on / 3 days off / 3 nights on / 3 nights off). (+ 23 Holidays) Starting Salary: £55,182 Structured Career Development + Annual performance related pay bonus and pay reviews + Share scheme + Competitive pension contributions + Laundered uniform and all safety equipment provided + Range of flexible benefits and Corporate discounts + Free parking + Overtime available + Free hot and cold drinks and subsidised canteen + Excellent parental benefits + Flexible working. What you become part of: Wakefield Distribution Centre is a 24/7 operation, our Automated Storage and Retrieval System (ASRS) warehouse holds 28,000 pallets, alongside a racked and block-stacked conventional warehouse of 12,000 pallets. The combined typical annual throughput is over three million pallets. Every 24 hours we expect to receive around 5,000 pallets from the on-site manufacturing operation, as well as handling around 360 vehicle movements at peak. What to expect: As a Multi Skill engineer based in the CCEP largest GB warehouse, you will be responsible for the efficient operation of the automated storage retrieval systems, including: maintenance, repairs, and attending to breakdowns. You will work as one of four shift-based teams of three engineers, that collective provide 24/7 operational cover, overseen by the Distribution Reliability Manager. Your core responsibilities within the ASRS: Safety: Operate within the Company Health and Safety management system Collaboration with team of site and centrally base H&S representatives. Responsible for critical inspections and defect reporting. Ensure the safe maintenance and repair of both ASRS and individual equipment. Uphold a safe system of work, adhering to SOP's e.g lockout tagout procedures. As part of the role, you will be trained as a member of the site emergency team, this includes engaging in rescue work at height and duties of a first aider. Operation: You will be expected to oversee the execution of an advanced maintenance plan while ensuring that direct and indirect KBIs are met. Perform both preventative and corrective maintenance on both electrical and mechanical systems (20/80 elec/mech) to guarantee that the warehouse's various components continue to function as intended. You will complete a site based electrical competency assessment and area familiarization before commencing work. Make efficient use of our Central Maintenance Management System Collaborate with a network of local and external engineering teams. Promote operational excellence by sharing best practices Innovate and enhance current systems and procedures. Providing technical assistance for product/equipment adjustments. Skills & Prerequisites: Apprentice Served in Mechatronics (Will also consider Electrical Engineering Apprenticeship with quantifiable Mechanical Experience Or Mechanical Engineering Apprenticeship with quantifiable electrical experience and willing to undertake the Electrical qualification). Note: We will not consider a Level 3 electrotechnical Buildings & Structures apprenticeship on it's own OR Level 3 NVQ or above in Mechanical and/or Engineering, alongside an additional academic qualification (CITY&Guilds 3 or above / BTEC / HNC / HND / Degree). You will be expected to undertake both a Mechanical and Electrical skills assessment during interview to confirm skill base. Proven knowledge and experience working within both Mechanical and Electrical Engineering Ability to work at height - up to 100ft (vertical climb in restricted spaces) Experience in 3 phase electrical systems and mechanical drive systems. Previous record of Process Compliance and Fault-Finding experience on both Mechanical and Electrical equipment. Understanding of the in/output of programable logic controllers (PLC) Awareness of PUWER / LOLER / LOTO The closing date for applications is 15/04/26. We reserve the right to close this advertisement early if we receive a high volume of applications. To ensure you are considered for this role, we encourage you to apply as soon as possible.

Multi Skilled Production Engineer (Nights) Location: Evesham Salary: £42,600 - £51,380 Hours: 4 on / 4 off 6:00pm - 6:00am Full-time, Permanent The Company Our client is a well-established manufacturing business operating within a fast-paced production environment. Due to continued investment in their engineering team, they are seeking a Multiskilled Production Engineer to support the maintenance and performance of production equipment across the site. The Role Reporting to the Engineering Manager, this position will play a key role in delivering a successful engineering maintenance shift by supporting equipment reliability, carrying out planned preventative maintenance, and responding effectively to breakdowns. The role requires a strong electrical bias alongside solid mechanical fault-finding capability, ensuring production equipment operates safely, efficiently, and in line with operational targets. Key Responsibilities Electrical & Mechanical Maintenance Diagnose and repair faults across production machinery in a safe and methodical manner Carry out preventative maintenance activities to a high standard Support breakdown response to minimise downtime and improve equipment reliability Conduct electrical machinery audits and ensure safe operation of plant equipment Perform root cause analysis and record findings to support long-term improvements Identify and implement improvements to equipment performance Operational Support Work closely with operations teams to resolve equipment issues quickly Contribute to effective shift handovers, ensuring key issues are communicated clearly Maintain accurate maintenance records and documentation Health, Safety & Compliance Ensure all engineering work is completed in line with health and safety legislation and company procedures Follow lock-off / tag-off procedures and ensure safe working practices are maintained Participate in risk assessments and support a safe working environment

Role: Maintenance Engineer Shift: 4 on 4 off - days/nights Location: Okehampton, Devon Salary: Highly competetive (click appy for salary information) Are you ready to be part of something huge? Are you an experienced Maintenance Engineer looking to elevate your career with a world-leading manufacturer? Do you want to work in a state-of-the-art facility that's just had record-breaking investment, setting the stage for innovation and growth like never before? This isn't just another job - it's a chance to be at the heart of a game-changing transformation. Yolk are thrilled to be partnering with an iconic household name in this exclusive recruitment campaign. This business is breaking boundaries with unprecedented levels of investment, revolutionising their operations with cutting-edge technology and world-class production systems. Be part of a team where your skills won't just be utilised - they'll be celebrated. As this site expands, so do the opportunities for you to make a real impact. This is your chance to join a multiskilled maintenance team at a critical moment, with access to advanced training, career development, and an attractive package packed with benefits. This is what you'll be doing: The Maintenance Engineer will be the backbone of production efficiency, ensuring that machinery and equipment are performing at their peak. You'll be hands-on with the latest technology, tackling both preventive and reactive maintenance to keep things running smoothly. Responsibilities: Carry out planned preventative maintenance to keep downtime at an absolute minimum, ensuring production targets are smashed. Troubleshoot and diagnose breakdowns with precision, using structured problem-solving techniques. Perform advanced maintenance tasks both individually and as part of a close-knit team to resolve control and mechanical challenges. Lead from the front on health and safety, ensuring compliance and actively participating in risk assessments. Drive site-wide projects and continuous improvement initiatives, optimising operational efficiencies and making your mark on the site's performance. Collaborate seamlessly with team members, fostering a culture of best practices and continuous improvement across all shifts. Proactively problem-solve, identifying root causes and implementing effective solutions. Qualifications: Proven experience as a Maintenance Engineer within a manufacturing environment. Time-served/apprentice trained as an Electrical, Mechanical, or Multiskilled Engineer, qualified to a minimum NVQ Level 3/ONC or higher. A positive, can-do attitude with exceptional communication skills. And this is what you'll get in return: 26.5 days holiday - Because work-life balance matters. Employer pension matched up to 6% - Secure your future while you grow your career. 4x annual salary life assurance cover - Peace of mind for you and your loved ones. Flexible benefits - Including the option to buy up to 5 extra days of annual leave and access to a reward gateway scheme with discounts at major retailers. Unmatched career development opportunities - With tailored training programs to ensure you stay at the cutting edge of your field. Join a company that doesn't just talk about innovation - they live and breathe it. With substantial investment and massive expansion underway, this isn't just a job - it's a career-defining opportunity. You'll be joining a well-established business celebrated for its commitment to excellence, and you'll play a pivotal role in its next chapter of success. Are you ready to take your career to the next level? Don't wait - apply today and be part of the future! Please apply with your CV, and feel free to include a cover letter outlining why you're the perfect fit for this role. Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive, we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying, then unfortunately you have been unsuccessful. Please keep an eye on our website for more opportunities.

A well-established manufacturing business in Evesham is seeking a Multi Skilled Production Engineer for a night shift role. The successful candidate will support the maintenance and performance of production equipment, ensuring reliable operations and compliance with health and safety standards. Responsibilities include diagnosing faults, conducting preventative maintenance, and supporting operational teams. Ideal candidates will have strong electrical and mechanical skills. This is a full-time, permanent position with a salary range of £42,600 - £51,380.

Multiskilled Maintenance Engineer Days (6am-2pm,8am-4pm and 2pm-10pm) Up to £46,000 + Enhanced Overtime + Quarterly Bonus Warminster Have you recently completed your apprenticeship or are you a time-served Maintenance Engineer with experience in high-volume manufacturing? Would you like to join a well-established business with a long history of growth, consistent investment in their sites, and a supportive engineering culture? This is an excellent opportunity to join the multiskilled maintenance team in a role offering competitive pay, overtime at increased rates, quarterly performance bonuses, and opportunities for further training. This is what you'll be doing The Maintenance Engineer will be responsible for keeping production running smoothly across a wide range of automated machinery and equipment. You'll carry out both planned and reactive maintenance while driving improvements in reliability and safety. Key Responsibilities: Deliver planned preventative maintenance (PPM) schedules to minimise downtime. Respond quickly and effectively to breakdowns, carrying out root cause analysis. Work confidently within control panels, carrying out electrical fault finding, isolations, and component replacement (inverters, relays, drives, sensors, motors, etc.). Support with PLC fault finding, working with ladder logic and I/O modules to diagnose issues. Undertake mechanical tasks such as replacing bearings, gearboxes, and seals when required. Contribute to continuous improvement projects focused on efficiency, reliability, and safety. Maintain accurate records of work completed and ensure compliance with H&S procedures. Support colleagues and share best practices across shifts to develop team capability. Qualifications & Experience Required Time-served or apprentice-trained Maintenance Engineer Electrical qualifications (18th Edition or equivalent). Strong electrical fault-finding skills with the ability to work independently. Experience in a manufacturing or fast-moving production environment. Familiarity with PLC fault finding (Siemens/Mitsubishi/Allen Bradley desirable). Confident with both electrical and mechanical maintenance tasks And this is what you'll get in return Competitive starting salary of up to £46,000. Enhanced overtime rates, allowing you to boost your earnings significantly. Quarterly performance-based bonus. Ongoing training and development, with support for both internal and external courses. The chance to work with a long-established company that continues to invest heavily in its people, plant, and equipment. Are you up to the challenge? If you're an experienced Maintenance Engineer and want to join a thriving manufacturing business, we'd love to hear from you. Please apply with your CV today, or contact Liam Reid at Yolk Recruitment to discuss the role in more detail. Please note, this role is not eligible for sponsorship. Applicants must already have the right to work in the UK.

Job Title: Multiskilled Operator (Clyde Valley, Glasgow) Job Purpose To support the effective day-to-day operation of site activities by working as part of a multiskilled team. The role involves undertaking a variety of operational duties as directed by the Supervisor to ensure site priorities are achieved safely and efficiently. The successful candidate will be trained in multiple operational functions and will be expected to rotate across tasks depending on business needs. Key Responsibilities Carry out a range of site duties as directed, supporting overall operational requirements Operate across multiple disciplines, including (training provided where required): Weighbridge operations Forklift Truck operation (or similar plant such as shovel or grab) Traffic marshalling Picking line activities Undertake general operational tasks such as: Litter picking and housekeeping Supporting cleaning activities Clearing plant blockages Completing site documentation (logs, fire checks, etc.) Health & Safety Take full responsibility for working safely and preventing harm to people, plant, and the environment Follow all site Health & Safety procedures, including LOTOTO and Traffic Management Systems Proactively identify and report hazards, defects, or non-conformances Maintain a strong safety-first culture at all times Accountabilities Ensure compliance with all business management systems and site procedures Report any issues affecting safety, environment, or production to the line manager Complete all work efficiently and to a high standard Accurately maintain electronic and paper-based records, including: Daily equipment checks Defect reporting Production logs Carry out regular cleaning and housekeeping to maintain a safe working environment Support recycling operations including picking, baling, and general processing activities Assist with coordination and adherence to site traffic management procedures Operate weighbridge systems and maintain accurate transactional records Communicate operational issues and equipment defects effectively Maintain clean and organised work areas at all times Be flexible and rotate between tasks based on operational needs Travel to other sites occasionally when required Working Relationships Reports to: Operations Production Supervisor / Transfer Station Supervisor Works closely with site teams to maximise productivity and efficiency Candidate Requirements Strong work ethic and positive attitude Health & Safety focused mindset Comfortable working both indoors and outdoors Ability to work effectively within a small team Flexible and adaptable approach to work Willingness to learn and undertake training Desirable: Forklift Truck (FLT) licence Package & Benefits Salary: Circa £30,000 Shift Pattern: 4 on / 4 off (Days only, 7:00am 7:00pm) Discretionary bonus of up to 10% 23.5 days holiday Pension scheme (up to 7% employer contribution) Company sick pay scheme If this role is of interest, please press apply or get in touch on (phone number removed) or (url removed)