Mobile Multi Skilled Commercial Gas Engineer Job Types: Full-time, Permanent Salary: Up to 50,000 per year Salary negotiable: Experience and Qualification dependent My client is based in Sutton, Surrey. The company has been running since 2003 providing Technical M&E service support to the Commercial Building Maintenance sector. hey run a small team of highly skilled mobile engineers covering London, Greater London and South of England. The role is to provide a variety of general maintenance and reactive services and corrective works on buildings, plant and site Perform testing and inspecting of mechanical systems in accordance with industry standards Ensure that all plant and systems are maintained and operated in order to provide maximum efficiency, availability and reliability Carry out remedial and/or refurbishment works arising from breakdown or maintenance inspections Implement all mechanical maintenance and corrective works on the site in accordance with maintenance Instructions Carry out minor new works installations and testing Skills and experience: Qualified and experienced and have excellent communication skills. Full current driving licence with no more than 3 points. The successful candidate should ideally possess the following gas qualifications BMP1 Boosters, low pressure CCN1 core domestic gas safety assessment criteria CDGA1 commission service repair & breakdown of commercial direct fired heating appliances & equipment CIGA1 commission service repair & breakdown of commercial indirect fired heating appliances & equipment CODNCO1 changeover domestic natural gas to commercial NG CORT1 commission service repair & breakdown of gas fired commercial overhead luminous radiant plaque & radiant tube heaters (not essential) CPA1 combustion performance analysis ICPN1 installation of commercial pipework TPCP1A testing & purging of low-pressure commercial pipework Employees Package: 40 Hours Per week Over Time available (but not guaranteed) 28 days Holiday including Bank Holidays Company Van and fuel card Work Wear Pension Private Medical Company Phone Training Some of our clients are Government departments so the successful candidate will be required to pass Home Office Security Vetting (SC). They are looking for a highly technical and motivated engineer to join their team who will be willing and able in assisting my clientto progress our aspirations in the commercial market.
Jan 01, 2026
Full time
Mobile Multi Skilled Commercial Gas Engineer Job Types: Full-time, Permanent Salary: Up to 50,000 per year Salary negotiable: Experience and Qualification dependent My client is based in Sutton, Surrey. The company has been running since 2003 providing Technical M&E service support to the Commercial Building Maintenance sector. hey run a small team of highly skilled mobile engineers covering London, Greater London and South of England. The role is to provide a variety of general maintenance and reactive services and corrective works on buildings, plant and site Perform testing and inspecting of mechanical systems in accordance with industry standards Ensure that all plant and systems are maintained and operated in order to provide maximum efficiency, availability and reliability Carry out remedial and/or refurbishment works arising from breakdown or maintenance inspections Implement all mechanical maintenance and corrective works on the site in accordance with maintenance Instructions Carry out minor new works installations and testing Skills and experience: Qualified and experienced and have excellent communication skills. Full current driving licence with no more than 3 points. The successful candidate should ideally possess the following gas qualifications BMP1 Boosters, low pressure CCN1 core domestic gas safety assessment criteria CDGA1 commission service repair & breakdown of commercial direct fired heating appliances & equipment CIGA1 commission service repair & breakdown of commercial indirect fired heating appliances & equipment CODNCO1 changeover domestic natural gas to commercial NG CORT1 commission service repair & breakdown of gas fired commercial overhead luminous radiant plaque & radiant tube heaters (not essential) CPA1 combustion performance analysis ICPN1 installation of commercial pipework TPCP1A testing & purging of low-pressure commercial pipework Employees Package: 40 Hours Per week Over Time available (but not guaranteed) 28 days Holiday including Bank Holidays Company Van and fuel card Work Wear Pension Private Medical Company Phone Training Some of our clients are Government departments so the successful candidate will be required to pass Home Office Security Vetting (SC). They are looking for a highly technical and motivated engineer to join their team who will be willing and able in assisting my clientto progress our aspirations in the commercial market.
LOCATION: LondonFire Brigade SHIFT PATTERN: Monday to Friday HOURS: 40 hours per week SALARY: Competitive ROLE OVERVIEW AND PURPOSE You will be utilising your core skills as a Gas Combustion engineer, reactive fault diagnostics and installations associated to this company's core activities. Primary Gas Engineer on our mobile contract delivering Planned maintenance and Reactive tasks. Types of PPM we cover on the contract-Gas boilers, Gas Water heaters, Gas pipework testing, Gas Air heaters and Gas Radiant tube heaters. The engineer will be able to manage unsafe situations via warning notices and be able to communicate with the client on behalf of the company. This role requires someone who can manage workloads, meet deadlines and arrange quotations of remedial jobs over £500. Engineer is expected to be competent in general engineer works with a multi-skilled role or a biased towards mechanical, electrical trades. Full commissioning and servicing of all HVAC Equipment. Co-operation with contracts staff were necessary to achieve our employer's acceptance in line with agreed contract terms. Produce all documentation as dictated by workload, i.e. Technical reports and reject reports for failures of components or plant. Responsible for own Health & Safety on site and follow Method Statements and Risk Assessments as standard on all sites, highlighting specific requirements as required. KEY RESPONSIBILITIES Maintenance and reactive repair to gas equipment to current regulations, standards and manufacturer's instructions. Mechanical and electrical general competence. Quoted work repairs and light installation work on gas equipment across our network of sites. Completing a weekly time sheet correctly and submitting it to your line manager. Submitting Expenses weekly with all supporting receipts. Completing all necessary paperwork for the customer whilst on site and obtaining a customer's signature to enable the job attended to be invoiced without any delays. Completing engineer's worksheet in full, giving full details of plant that requires additional work. Identifying lifecycle replacement requirements. ESSENTIAL SKILLS & EXPERIENCE Commercial and Domestic gas qualified in gas boilers, water heaters, tube heaters, gas air heaters, pipework, tightness testing and purging. Emergency lighting fundamentals unit 1. Any additional trade qualifications (plumbing & Mechanical). IPAF, PASMA. Understand SFG20 and delivering of works to a timescale. Preferred to have NVQ in Mechanical and/or electrical to backup gas qualifications. DESIRABLE BUT NOT ESSENTIAL Extra qualifications to enable further self-delivery of our contract. L8 qualified. We're proud to offer a great range of benefits including: 24/7 GP: Both you and your immediate family can speak to a UK-based GP from the comfort of your own home. Mental Health support and Life Event Counseling. Get Fit Programme. Financial and legal support. Cycle to work scheme. Access Perks at Work, our innovative employee app where you can find: Perks: discounts, gift cards, cashback, and exclusive offers. Life: Search for resources and tools on topics ranging from family and life to health, money and work. Support: Online chat or telephone service for urgent support in a crisis. For more information about ABM's benefits, visit our About ABM: ABM (NYSE: ABM) is one of the world's largest providers of integrated facility, engineering, and infrastructure solutions. Every day, over 100,000 team members deliver essential services that make spaces cleaner, safer, and efficient, enhancing the overall occupant experience. ABM serves a wide range of market sectors including commercial real estate, aviation, mission critical, and manufacturing and distribution. With over $8 billion in annual revenue and a blue-chip client base, ABM delivers innovative technologies and sustainable solutions that enhance facilities and empower clients to achieve their goals. Committed to creating smarter, more connected spaces, ABM is investing in the future to meet evolving challenges and build a healthier, thriving world. ABM: Driving possibility, together. For more information, visit. ABM are committed to employment practices that promote diversity and inclusion in employment regardless of age, disability, gender reassignment, sex, marriage and civil partnership status, pregnancy and maternity status, race, religion or belief. We are proud members of the Armed Forces Covenant Employer Recognition Scheme.
Jan 01, 2026
Full time
LOCATION: LondonFire Brigade SHIFT PATTERN: Monday to Friday HOURS: 40 hours per week SALARY: Competitive ROLE OVERVIEW AND PURPOSE You will be utilising your core skills as a Gas Combustion engineer, reactive fault diagnostics and installations associated to this company's core activities. Primary Gas Engineer on our mobile contract delivering Planned maintenance and Reactive tasks. Types of PPM we cover on the contract-Gas boilers, Gas Water heaters, Gas pipework testing, Gas Air heaters and Gas Radiant tube heaters. The engineer will be able to manage unsafe situations via warning notices and be able to communicate with the client on behalf of the company. This role requires someone who can manage workloads, meet deadlines and arrange quotations of remedial jobs over £500. Engineer is expected to be competent in general engineer works with a multi-skilled role or a biased towards mechanical, electrical trades. Full commissioning and servicing of all HVAC Equipment. Co-operation with contracts staff were necessary to achieve our employer's acceptance in line with agreed contract terms. Produce all documentation as dictated by workload, i.e. Technical reports and reject reports for failures of components or plant. Responsible for own Health & Safety on site and follow Method Statements and Risk Assessments as standard on all sites, highlighting specific requirements as required. KEY RESPONSIBILITIES Maintenance and reactive repair to gas equipment to current regulations, standards and manufacturer's instructions. Mechanical and electrical general competence. Quoted work repairs and light installation work on gas equipment across our network of sites. Completing a weekly time sheet correctly and submitting it to your line manager. Submitting Expenses weekly with all supporting receipts. Completing all necessary paperwork for the customer whilst on site and obtaining a customer's signature to enable the job attended to be invoiced without any delays. Completing engineer's worksheet in full, giving full details of plant that requires additional work. Identifying lifecycle replacement requirements. ESSENTIAL SKILLS & EXPERIENCE Commercial and Domestic gas qualified in gas boilers, water heaters, tube heaters, gas air heaters, pipework, tightness testing and purging. Emergency lighting fundamentals unit 1. Any additional trade qualifications (plumbing & Mechanical). IPAF, PASMA. Understand SFG20 and delivering of works to a timescale. Preferred to have NVQ in Mechanical and/or electrical to backup gas qualifications. DESIRABLE BUT NOT ESSENTIAL Extra qualifications to enable further self-delivery of our contract. L8 qualified. We're proud to offer a great range of benefits including: 24/7 GP: Both you and your immediate family can speak to a UK-based GP from the comfort of your own home. Mental Health support and Life Event Counseling. Get Fit Programme. Financial and legal support. Cycle to work scheme. Access Perks at Work, our innovative employee app where you can find: Perks: discounts, gift cards, cashback, and exclusive offers. Life: Search for resources and tools on topics ranging from family and life to health, money and work. Support: Online chat or telephone service for urgent support in a crisis. For more information about ABM's benefits, visit our About ABM: ABM (NYSE: ABM) is one of the world's largest providers of integrated facility, engineering, and infrastructure solutions. Every day, over 100,000 team members deliver essential services that make spaces cleaner, safer, and efficient, enhancing the overall occupant experience. ABM serves a wide range of market sectors including commercial real estate, aviation, mission critical, and manufacturing and distribution. With over $8 billion in annual revenue and a blue-chip client base, ABM delivers innovative technologies and sustainable solutions that enhance facilities and empower clients to achieve their goals. Committed to creating smarter, more connected spaces, ABM is investing in the future to meet evolving challenges and build a healthier, thriving world. ABM: Driving possibility, together. For more information, visit. ABM are committed to employment practices that promote diversity and inclusion in employment regardless of age, disability, gender reassignment, sex, marriage and civil partnership status, pregnancy and maternity status, race, religion or belief. We are proud members of the Armed Forces Covenant Employer Recognition Scheme.
A leading facilities services provider is seeking a Gas Combustion engineer to manage maintenance and reactive tasks across a network of sites. The ideal candidate will hold commercial and domestic gas qualifications with experience in HVAC equipment servicing. This full-time role requires strong engineering competencies and the capacity to handle safety protocols effectively. The position offers competitive salary and a supportive work environment.
Jan 01, 2026
Full time
A leading facilities services provider is seeking a Gas Combustion engineer to manage maintenance and reactive tasks across a network of sites. The ideal candidate will hold commercial and domestic gas qualifications with experience in HVAC equipment servicing. This full-time role requires strong engineering competencies and the capacity to handle safety protocols effectively. The position offers competitive salary and a supportive work environment.
WELCOME TO LINAKER For 30 years Linaker has specialised in the creation and maintenance of tailor made business environments. Having shaped workspaces for a wide range of businesses across the country, Linaker's heritage lies in our ability to design and regulate unique spaces that truly work. Linaker was founded upon three core values: trust, reliability and care. We are not just a service provider, rather an essential part of our clients' architecture and, ultimately, an extension of your business, a part of one team. The last couple of years has seen Linaker grow exponentially and 2025 is no exception. Our client base continues to grow month on month and as a result we are now looking for a talented Gas Engineer to join us on our upward journey. ABOUT THE ROLE As a Gas Engineer you will be responsible for both planned and reactive maintenance. WHAT YOU WILL BE RESPONSIBLE FOR Completion of PPM works to schedule in the most proactive and efficient way possible. Notify issues to the helpdesk seeking advice from the contract manager where possible. Production of quotes in a thorough way, with thought out and researched methodology including correct parts and labour times required to ensure profitability, cost control and client satisfaction. Responsible for ensuring effective diagnostic of breakdowns and timely repair of equipment. Record and document all work carried out and raise appropriate documentation as quotes as required. Work in accordance with mandatory, health, safety, compliance and environmental requirements. Liaise with other departments, suppliers and other service providers. Maintaining site log books. Responsible for compliance and health and safety on site. Communicate and liaise with client and helpdesk. Provide excellent communication and customer service to our varied client base. Ensure equipment, tools, parts and company assets are calibrated, maintained and looked after in an appropriate manner. WHAT WE ARE LOOKING FOR Be able to demonstrate 2-5 years industry experience and qualified in the below areas. Essential: City & Guilds COCN1 (Core Gas Safety) / CCN1 Core Domestic Natural Gas Safety / CDGA1 (Non domestic Natural Gas & LPG Direct fired Heating Appliances and Equipment)/ CODNCO1 (Changeover Domestic To Non Domestic Gas & LPG Core Heating)/ CIGA1 (Non Domestic & LPG Indirect Gas Fired Heating Appliances & Equipment) / CPA1 (Domestic Combustion Performance Analysis) / CENWAT (Domestic Gas Central Heating/Hot Water Boilers & Circulators, Combination Boilers, Storage Water Heaters & Instantaneous Water Heaters) ICPN1 (Non Domestic Natural Gas and LPG Pipework & Fittings) / TPCP1 (Non Domestic Natural Gas, LPG, Other Gasses Testing and Purging)/ TPCP1A (Non Domestic Natural Gas Testing and Purging). A nice to have: CKR1 (Domestic Gas Cooking Appliances) / CCCN1 (Non Domestic Natural Gas Core Catering Appliances)/ HTR1 (Domestic Gas Fired and Wall Heaters) / CORT1 (Non Domestic Natural Gas & LPG Overhead Radiant Plaque & Tube Heaters). Desirable - Legionella Awareness & Practical Legionella Training, Asbestos Awareness, PASMA Mobile Access Towers for Users. IPAF 9dual Mobile Vertical (3a +3b) Mobile Boom - Operator. Technically competent, commercially aware with a sound understanding of Health and Safety. Good basic written and numerical skills and comfortable working with Microsoft office. Exceptional customer interaction skills, quick thinking and a confident communicator. A natural problem solver, who thrives under pressure. Can stay cool and calm in the face of adversity and can demonstrate empathy when overcoming challenges. Strong relationship management skills - internal and external. Ability to be self motivated and work well within a team. Flexibility to travel with a valid UK driving licence. THE PACKAGE Starting salary DOE with annual pay reviews. 25 Days holiday plus bank holidays. Van, Uniform and Tools provided from day 1. Above industry standard travel to site hourly payments. Attractive standby payment. Opportunity to earn overtime. Pension scheme. Death in Service available after qualifying period. INTERESTED? If you like the sound of the above and want to be part of a fast growing business, we would love to hear from you!
Jan 01, 2026
Full time
WELCOME TO LINAKER For 30 years Linaker has specialised in the creation and maintenance of tailor made business environments. Having shaped workspaces for a wide range of businesses across the country, Linaker's heritage lies in our ability to design and regulate unique spaces that truly work. Linaker was founded upon three core values: trust, reliability and care. We are not just a service provider, rather an essential part of our clients' architecture and, ultimately, an extension of your business, a part of one team. The last couple of years has seen Linaker grow exponentially and 2025 is no exception. Our client base continues to grow month on month and as a result we are now looking for a talented Gas Engineer to join us on our upward journey. ABOUT THE ROLE As a Gas Engineer you will be responsible for both planned and reactive maintenance. WHAT YOU WILL BE RESPONSIBLE FOR Completion of PPM works to schedule in the most proactive and efficient way possible. Notify issues to the helpdesk seeking advice from the contract manager where possible. Production of quotes in a thorough way, with thought out and researched methodology including correct parts and labour times required to ensure profitability, cost control and client satisfaction. Responsible for ensuring effective diagnostic of breakdowns and timely repair of equipment. Record and document all work carried out and raise appropriate documentation as quotes as required. Work in accordance with mandatory, health, safety, compliance and environmental requirements. Liaise with other departments, suppliers and other service providers. Maintaining site log books. Responsible for compliance and health and safety on site. Communicate and liaise with client and helpdesk. Provide excellent communication and customer service to our varied client base. Ensure equipment, tools, parts and company assets are calibrated, maintained and looked after in an appropriate manner. WHAT WE ARE LOOKING FOR Be able to demonstrate 2-5 years industry experience and qualified in the below areas. Essential: City & Guilds COCN1 (Core Gas Safety) / CCN1 Core Domestic Natural Gas Safety / CDGA1 (Non domestic Natural Gas & LPG Direct fired Heating Appliances and Equipment)/ CODNCO1 (Changeover Domestic To Non Domestic Gas & LPG Core Heating)/ CIGA1 (Non Domestic & LPG Indirect Gas Fired Heating Appliances & Equipment) / CPA1 (Domestic Combustion Performance Analysis) / CENWAT (Domestic Gas Central Heating/Hot Water Boilers & Circulators, Combination Boilers, Storage Water Heaters & Instantaneous Water Heaters) ICPN1 (Non Domestic Natural Gas and LPG Pipework & Fittings) / TPCP1 (Non Domestic Natural Gas, LPG, Other Gasses Testing and Purging)/ TPCP1A (Non Domestic Natural Gas Testing and Purging). A nice to have: CKR1 (Domestic Gas Cooking Appliances) / CCCN1 (Non Domestic Natural Gas Core Catering Appliances)/ HTR1 (Domestic Gas Fired and Wall Heaters) / CORT1 (Non Domestic Natural Gas & LPG Overhead Radiant Plaque & Tube Heaters). Desirable - Legionella Awareness & Practical Legionella Training, Asbestos Awareness, PASMA Mobile Access Towers for Users. IPAF 9dual Mobile Vertical (3a +3b) Mobile Boom - Operator. Technically competent, commercially aware with a sound understanding of Health and Safety. Good basic written and numerical skills and comfortable working with Microsoft office. Exceptional customer interaction skills, quick thinking and a confident communicator. A natural problem solver, who thrives under pressure. Can stay cool and calm in the face of adversity and can demonstrate empathy when overcoming challenges. Strong relationship management skills - internal and external. Ability to be self motivated and work well within a team. Flexibility to travel with a valid UK driving licence. THE PACKAGE Starting salary DOE with annual pay reviews. 25 Days holiday plus bank holidays. Van, Uniform and Tools provided from day 1. Above industry standard travel to site hourly payments. Attractive standby payment. Opportunity to earn overtime. Pension scheme. Death in Service available after qualifying period. INTERESTED? If you like the sound of the above and want to be part of a fast growing business, we would love to hear from you!
Astute's Power Team are looking for an Assistant Shift Plant Operator to join a large, modern Energy from Waste Power Station located in Bedfordshire. The facility, which is now in full time operation, provides a vital outlet for the sustainable disposal of over 545,000 tonnes of residual waste per year and will generate over 60 megawatts of low carbon energy - enough electricity to meet the needs of over 112,500 homes. The successful applicant will support the operations team with the safe and efficient operation of the site whilst adhering to health, safety and environmental regulations. If you have the right skills & experience and want to find out more, please get in touch! Responsibilities and duties of the Assistant Shift Plant Operator role Reporting to the Operations Shift Team Leader, you will: Support the safe and compliant operation of a modern energy recovery facility across a 12-hour rotating shift pattern. Carry out routine plant checks, operational rounds and first-line adjustments to maintain stable combustion and steam generation. Operate overhead cranes and mobile plant, following training and competency assessments. Assist with the control of boilers, turbine systems, waste handling equipment, water treatment processes and associated auxiliary plant. Contribute to site health and safety performance through inspections, reporting, and participation in safety discussions. Maintain accurate operational records and escalate abnormalities or permit-related concerns promptly. Support maintenance teams during planned and unplanned activities, including basic PPM tasks. Take responsibility for site cleanliness, consumable deliveries and stock management. Act as a Fire Marshal during emergency situations and work with the Shift Team Leader to coordinate responses. Professional qualifications We are looking for someone with the following: A National Vocational Qualification Level 2 (or equivalent) in a technical or science discipline is preferred. Experience in plant operations, process plant, or industrial maintenance. Practical exposure to boilers, turbines, or other large rotating equipment is advantageous. Willingness to undertake further training in line with the site competency framework. Personal skills The Assistant Shift Plant Operator role would suit someone who is: Safety-focused, disciplined, and attentive to detail. Confident working within a structured shift team and following operational procedures. Proactive, adaptable, and able to respond calmly to changing plant conditions. Keen to develop new skills within a highly technical environment. Salary and benefits of the Assistant Shift Plant Operator role Competitive starting salary with regular opportunities for progression. Pension scheme and comprehensive training programme. 12-hour rotating shift pattern offering excellent work-life balance. Opportunity to develop within a flagship energy-from-waste facility operated to high technical standards. Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Jan 01, 2026
Full time
Astute's Power Team are looking for an Assistant Shift Plant Operator to join a large, modern Energy from Waste Power Station located in Bedfordshire. The facility, which is now in full time operation, provides a vital outlet for the sustainable disposal of over 545,000 tonnes of residual waste per year and will generate over 60 megawatts of low carbon energy - enough electricity to meet the needs of over 112,500 homes. The successful applicant will support the operations team with the safe and efficient operation of the site whilst adhering to health, safety and environmental regulations. If you have the right skills & experience and want to find out more, please get in touch! Responsibilities and duties of the Assistant Shift Plant Operator role Reporting to the Operations Shift Team Leader, you will: Support the safe and compliant operation of a modern energy recovery facility across a 12-hour rotating shift pattern. Carry out routine plant checks, operational rounds and first-line adjustments to maintain stable combustion and steam generation. Operate overhead cranes and mobile plant, following training and competency assessments. Assist with the control of boilers, turbine systems, waste handling equipment, water treatment processes and associated auxiliary plant. Contribute to site health and safety performance through inspections, reporting, and participation in safety discussions. Maintain accurate operational records and escalate abnormalities or permit-related concerns promptly. Support maintenance teams during planned and unplanned activities, including basic PPM tasks. Take responsibility for site cleanliness, consumable deliveries and stock management. Act as a Fire Marshal during emergency situations and work with the Shift Team Leader to coordinate responses. Professional qualifications We are looking for someone with the following: A National Vocational Qualification Level 2 (or equivalent) in a technical or science discipline is preferred. Experience in plant operations, process plant, or industrial maintenance. Practical exposure to boilers, turbines, or other large rotating equipment is advantageous. Willingness to undertake further training in line with the site competency framework. Personal skills The Assistant Shift Plant Operator role would suit someone who is: Safety-focused, disciplined, and attentive to detail. Confident working within a structured shift team and following operational procedures. Proactive, adaptable, and able to respond calmly to changing plant conditions. Keen to develop new skills within a highly technical environment. Salary and benefits of the Assistant Shift Plant Operator role Competitive starting salary with regular opportunities for progression. Pension scheme and comprehensive training programme. 12-hour rotating shift pattern offering excellent work-life balance. Opportunity to develop within a flagship energy-from-waste facility operated to high technical standards. Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Established in 1979, Shield Environmental Services has become one of the largest national service providers in the environmental service sector. We have grown steadily over the years and have constantly adapted to meet the demands and changing practices of the sectors we work with. However, some things have never changed and we believe that our success is based upon our original core principle of exceptional customer care. We feel honoured to have many long-standing relationships with our clients, many of whom we have been working with for years. Shield Environmental Services Limited is an equal opportunity employer and values diversity. A commercial gas engineer is required to work within a dedicated team of mobile engineers on sites in the BS & BA postcodes and surrounding M4 Corridor region. The work will involve PPM, fault finding, reactive and breakdowns, quoting for repair and remedial works to various types of boilers and heating systems. Applicant should have ACS Commercial qualifications with relevant commercial experience. The applicant must have a good all-around knowledge and understanding of HVAC plant and would be expected to assist with various reactive and PPM tasks, as well as core combustion skills. Main Duties & Responsibilities: Be conversant with current Health & Safety legislation with relevance to safe working practices and attend toolbox talks Comply with specific Contract, work department and Company procedures at all times Complete a daily work log with the Shield CAFM system Maintain accurate records of works done and expenditure, using this information to report to the Lead Engineer as required Liaise and co-ordinate site activities associated with services for which you are responsible, i.e. labour planning and ordering of materials Assist in the preparation of emergency contingency plans Assist with co-ordination of all site activities, both maintenance and projects and ensure all safety aspects are managed and monitored in accordance with site/contract procedures and requirements Undertake all tasks associated with labour planning and providing holiday and sickness cover Carry out PPM and reactive work as required in order to meet completion deadlines Take ownership of the clients' needs and pursue good communications with the customer in order to build a stable relationship Be proactive with regard to preventative maintenance and extra works Operate Shield QA procedures and maintain clear and legible records as required Be available to attend emergency call-outs and provide written incident reports as required Co-ordinate and manage all subcontractor's activities relating to works undertaken Provide cover for Supervisor when required, ie holidays, sickness Qualifications: Gas qualifications in:- Comb analysis, gas boilers under and over 70kw, pipework, warm air, gas fires, range cookers, air heating, water CH, commercial and domestic gas qualifications Excellent gas knowledge complete with an industry-recognised qualification COCN1 or CODNCO1 (Core Commercial Gas Safety) CDGA1 (Commercial Direct Fired Heating Appliances) CIGA1 (Commercial Indirect Fire Heating Appliances and Equipment) CORT1 (Commercial Radiant Tube Heaters) ICPN1 (First Fix Commercial Pipework) TPCP1 (Tightness Testing and Purging to IGE/UP/1) TPCP1A (Tightness Testing and Purging to IGE/UP/1A) CCN1 or COCDN1 (Core Domestic Gas Safety CENWAT (Domestic Central Heating/Water Heaters) CPA1 (Combustion Performance Analyser) WRAS G3 Unvented hot water Domestic Gas Experience Possess comprehensive technical skills along with extensive experience in commercial fault finding and rectification Comprehensive knowledge, both domestic and commercial of most major manufactures i.e Valliant, Powermatic, Riello, Broag, Combat, Ambi-Rad, Ideal, Potterton, Nu Way and Worcester etc. A good all-round knowledge of heating systems, fixed electrical systems & controls/BMS Good plumbing skills Good knowledge of all building services Minimum 2 years' practical experience within the building industry Health and Safety experience Two years' experience within a similar role Sound knowledge of computers software, Microsoft Office Time served apprenticeship Personal aptitude and skills: Logical thinker in fault finding situations Excellent interpersonal skills Good written and verbal communication skills Comfortable working within a team environment, able to contribute to group success whilst willingly following instructions of others Able to work unsupervised Self-motivated Adaptable and flexible approach to work requirements, willing to accept change Customer-focused Willing to volunteer help Commitment to providing a high-quality service to our customers and willingness to work flexibly and as a member of a team Scrupulous and reliable Good organisational skills and have a positive attitude Other requirements: Driving licence Compliance with company and site policies and procedures To wear company attire at all times Ability to work overtime as required Be prepared to work out of hours from time to time and participate in the call out rota
Jan 01, 2026
Full time
Established in 1979, Shield Environmental Services has become one of the largest national service providers in the environmental service sector. We have grown steadily over the years and have constantly adapted to meet the demands and changing practices of the sectors we work with. However, some things have never changed and we believe that our success is based upon our original core principle of exceptional customer care. We feel honoured to have many long-standing relationships with our clients, many of whom we have been working with for years. Shield Environmental Services Limited is an equal opportunity employer and values diversity. A commercial gas engineer is required to work within a dedicated team of mobile engineers on sites in the BS & BA postcodes and surrounding M4 Corridor region. The work will involve PPM, fault finding, reactive and breakdowns, quoting for repair and remedial works to various types of boilers and heating systems. Applicant should have ACS Commercial qualifications with relevant commercial experience. The applicant must have a good all-around knowledge and understanding of HVAC plant and would be expected to assist with various reactive and PPM tasks, as well as core combustion skills. Main Duties & Responsibilities: Be conversant with current Health & Safety legislation with relevance to safe working practices and attend toolbox talks Comply with specific Contract, work department and Company procedures at all times Complete a daily work log with the Shield CAFM system Maintain accurate records of works done and expenditure, using this information to report to the Lead Engineer as required Liaise and co-ordinate site activities associated with services for which you are responsible, i.e. labour planning and ordering of materials Assist in the preparation of emergency contingency plans Assist with co-ordination of all site activities, both maintenance and projects and ensure all safety aspects are managed and monitored in accordance with site/contract procedures and requirements Undertake all tasks associated with labour planning and providing holiday and sickness cover Carry out PPM and reactive work as required in order to meet completion deadlines Take ownership of the clients' needs and pursue good communications with the customer in order to build a stable relationship Be proactive with regard to preventative maintenance and extra works Operate Shield QA procedures and maintain clear and legible records as required Be available to attend emergency call-outs and provide written incident reports as required Co-ordinate and manage all subcontractor's activities relating to works undertaken Provide cover for Supervisor when required, ie holidays, sickness Qualifications: Gas qualifications in:- Comb analysis, gas boilers under and over 70kw, pipework, warm air, gas fires, range cookers, air heating, water CH, commercial and domestic gas qualifications Excellent gas knowledge complete with an industry-recognised qualification COCN1 or CODNCO1 (Core Commercial Gas Safety) CDGA1 (Commercial Direct Fired Heating Appliances) CIGA1 (Commercial Indirect Fire Heating Appliances and Equipment) CORT1 (Commercial Radiant Tube Heaters) ICPN1 (First Fix Commercial Pipework) TPCP1 (Tightness Testing and Purging to IGE/UP/1) TPCP1A (Tightness Testing and Purging to IGE/UP/1A) CCN1 or COCDN1 (Core Domestic Gas Safety CENWAT (Domestic Central Heating/Water Heaters) CPA1 (Combustion Performance Analyser) WRAS G3 Unvented hot water Domestic Gas Experience Possess comprehensive technical skills along with extensive experience in commercial fault finding and rectification Comprehensive knowledge, both domestic and commercial of most major manufactures i.e Valliant, Powermatic, Riello, Broag, Combat, Ambi-Rad, Ideal, Potterton, Nu Way and Worcester etc. A good all-round knowledge of heating systems, fixed electrical systems & controls/BMS Good plumbing skills Good knowledge of all building services Minimum 2 years' practical experience within the building industry Health and Safety experience Two years' experience within a similar role Sound knowledge of computers software, Microsoft Office Time served apprenticeship Personal aptitude and skills: Logical thinker in fault finding situations Excellent interpersonal skills Good written and verbal communication skills Comfortable working within a team environment, able to contribute to group success whilst willingly following instructions of others Able to work unsupervised Self-motivated Adaptable and flexible approach to work requirements, willing to accept change Customer-focused Willing to volunteer help Commitment to providing a high-quality service to our customers and willingness to work flexibly and as a member of a team Scrupulous and reliable Good organisational skills and have a positive attitude Other requirements: Driving licence Compliance with company and site policies and procedures To wear company attire at all times Ability to work overtime as required Be prepared to work out of hours from time to time and participate in the call out rota
