Principal Mechanical Design Engineer Derby, Derbyshire Up to £75,000 + Benefits (flexible) The position will suit an experienced mechanical design engineer looking for an opportunity to develop their career within a fast-paced organisation at the cutting edge of engine design and development. You will be responsible for the concept design, development and delivery of hydrogen and diesel engine / powertrain systems and components from concept to launch. You will also ensure robust system/component regulations, quality, cost and timing requirements are met. As a principal engineer you will lead a small team and be required to mentor and develop the engineers utilising your wealth of experience with engine / powertrain technologies. The Role: Principal Mechanical Design Engineer You will be responsible for: End-to-end mechanical design engineering activities (research, concept, 3D design, delivery and launch) relating to engine design, for example; Valvetrain design (DOHC / SOHC), Timing gear systems, Crankcase ventilation (CCV), Aftertreatment systems (e.g., DEF / SCR), Fuel systems, including hydrogen experience, Air handling systems (e.g., intake manifolds, throttle bodies) Supporting in-house quality, manufacturing and service teams in resolving complex technical issues that lead to engineering change Creating clean sheet concept designs from first principles. Plan and execute Proof-of-Concept assessment either through test campaign, and/or first principle analysis and simulation Supporting product development, ensuring design for assembly and achieving quality in design. Creating engine system and component specifications and designs based on agreed requirements with key stakeholders. Assisting with the development of engine system and component FMEAs and DVPs, Coordinate and supervise DVP activities (e.g. analytical, simulation, and rig/engine/machine testing) Resolving engineering issues using structured problem-solving methodologies (e.g. Global 8D, DMAIC) Supporting suppliers via APQP process; deliver prototypes and PPAP parts to schedule and fulfil quality and performance requirements Skills / knowledge required: Principal Mechanical Design Engineer A degree in a mechanical engineering discipline, with a sound understanding of fundamental Mechanical Engineering principles A sound grasp of engine product development cycle and expertise in engine system and component specification, design, development and sign-off Broad understanding of dynamic, reciprocating/rotating systems. Ability to work well under pressure and to meet deadlines with the ability to communicate clearly and concisely at all levels Demonstratable proficiency in use of 2D drawing and 3D Modelling packages with knowledge of mechanical engineering GD&T and manufacturing processes. (NX, Creo, Catia, SolidWorks etc) Ability to lead projects and mentor/support junior engineers in the team Knowledge of engine cooling, thermodynamics, induction systems would be beneficial The company offers excellent training and development with fantastic benefits including bonus, pension, health and 33 days holiday coupled with up to relocation and support with visa applications. This is a full-time, office-based role in Derbyshire, UK. Relocation and visa sponsorship can be considered for the right candidate. Commutable from: Rocester, Stoke-on-Trent, Derby, Nottingham, Birmingham, Uttoxeter, Stafford, Burton-on-Trent.
Dec 11, 2025
Full time
Principal Mechanical Design Engineer Derby, Derbyshire Up to £75,000 + Benefits (flexible) The position will suit an experienced mechanical design engineer looking for an opportunity to develop their career within a fast-paced organisation at the cutting edge of engine design and development. You will be responsible for the concept design, development and delivery of hydrogen and diesel engine / powertrain systems and components from concept to launch. You will also ensure robust system/component regulations, quality, cost and timing requirements are met. As a principal engineer you will lead a small team and be required to mentor and develop the engineers utilising your wealth of experience with engine / powertrain technologies. The Role: Principal Mechanical Design Engineer You will be responsible for: End-to-end mechanical design engineering activities (research, concept, 3D design, delivery and launch) relating to engine design, for example; Valvetrain design (DOHC / SOHC), Timing gear systems, Crankcase ventilation (CCV), Aftertreatment systems (e.g., DEF / SCR), Fuel systems, including hydrogen experience, Air handling systems (e.g., intake manifolds, throttle bodies) Supporting in-house quality, manufacturing and service teams in resolving complex technical issues that lead to engineering change Creating clean sheet concept designs from first principles. Plan and execute Proof-of-Concept assessment either through test campaign, and/or first principle analysis and simulation Supporting product development, ensuring design for assembly and achieving quality in design. Creating engine system and component specifications and designs based on agreed requirements with key stakeholders. Assisting with the development of engine system and component FMEAs and DVPs, Coordinate and supervise DVP activities (e.g. analytical, simulation, and rig/engine/machine testing) Resolving engineering issues using structured problem-solving methodologies (e.g. Global 8D, DMAIC) Supporting suppliers via APQP process; deliver prototypes and PPAP parts to schedule and fulfil quality and performance requirements Skills / knowledge required: Principal Mechanical Design Engineer A degree in a mechanical engineering discipline, with a sound understanding of fundamental Mechanical Engineering principles A sound grasp of engine product development cycle and expertise in engine system and component specification, design, development and sign-off Broad understanding of dynamic, reciprocating/rotating systems. Ability to work well under pressure and to meet deadlines with the ability to communicate clearly and concisely at all levels Demonstratable proficiency in use of 2D drawing and 3D Modelling packages with knowledge of mechanical engineering GD&T and manufacturing processes. (NX, Creo, Catia, SolidWorks etc) Ability to lead projects and mentor/support junior engineers in the team Knowledge of engine cooling, thermodynamics, induction systems would be beneficial The company offers excellent training and development with fantastic benefits including bonus, pension, health and 33 days holiday coupled with up to relocation and support with visa applications. This is a full-time, office-based role in Derbyshire, UK. Relocation and visa sponsorship can be considered for the right candidate. Commutable from: Rocester, Stoke-on-Trent, Derby, Nottingham, Birmingham, Uttoxeter, Stafford, Burton-on-Trent.
Sales Engineer / Area Sales Manager / Business Development Manager required to join a leading engineering supplier. The successful Sales Engineer / Area Sales Manager / Business Development Manager will be responsible for developing new business, managing key accounts, and providing technical product support to customers within the water industry, wastewater, industrial manufacturing, food & beverage, pharmaceutical, and steel sectors. The role will involve promoting a range of engineered pump products, packaged systems, and related solutions across OEM, contractor, and end-user channels. The Sales Engineer / Area Sales Manager / Business Development Manager will ideally have experience selling pumps, rotating equipment, valves, compressors, filtration, filters, pumping stations, pumping systems or fluid-handling systems, with knowledge of applications in the water industry or process sectors. Full product training provided. Package £45,000 £55,000 depending on experience Company car or allowance Bonus scheme 25 days holiday plus bank holidays Company pension Mobile, laptop & business expenses Additional benefits Sales Engineer / Area Sales Manager / Business Development Manager Role Develop new business and manage existing customer accounts across the UK. Promote and sell engineered pumping solutions, wastewater equipment, and fluid-handling systems into the water sector, industrial plants, food & beverage, pharmaceutical facilities, and steelworks. Provide technical sales support, including product selection, system/application advice, site surveys, and solution proposals. Prepare quotations, tenders, and commercial proposals for pump packages and associated equipment. Work closely with engineering, service, and commercial teams to ensure customer requirements are met. Attend customer sites, identify opportunities, and build long-term relationships with contractors, OEMs, utilities, and end-users. Deliver presentations, product demonstrations, and technical training where required. Office based in Peterborough for the first few months, then fully remote covering UK wide. Sales Engineer / Area Sales Manager / Business Development Manager Requirements Experience in technical sales within pumps, rotating equipment, fluid-handling equipment, water treatment systems, dosing, or related engineered products. Background as an External Sales Engineer, Technical Sales Engineer, Area Sales Manager, Key Account Manager, Business Development Manager, Sales Executive or similar. Strong understanding of pump applications, valves, compressors, rotating equipment, filtration, filters, pumping stations, pumping systems, or a similar technical product within the water, wastewater, industrial, food & beverage, pharmaceutical, or steel industries. Ability to read technical specifications, understand mechanical principles, and communicate complex engineered solutions. Proven track record in territory management, business development, and building strong customer relationships. A mechanical, process, or engineering background (degree, HNC, HND, apprenticeship) would be beneficial but not essential. Full UK driving license. Willingness to work out of the office in Peterborough for the first few months, then fully remote covering the UK. JBRP1_UKTJ
Dec 11, 2025
Full time
Sales Engineer / Area Sales Manager / Business Development Manager required to join a leading engineering supplier. The successful Sales Engineer / Area Sales Manager / Business Development Manager will be responsible for developing new business, managing key accounts, and providing technical product support to customers within the water industry, wastewater, industrial manufacturing, food & beverage, pharmaceutical, and steel sectors. The role will involve promoting a range of engineered pump products, packaged systems, and related solutions across OEM, contractor, and end-user channels. The Sales Engineer / Area Sales Manager / Business Development Manager will ideally have experience selling pumps, rotating equipment, valves, compressors, filtration, filters, pumping stations, pumping systems or fluid-handling systems, with knowledge of applications in the water industry or process sectors. Full product training provided. Package £45,000 £55,000 depending on experience Company car or allowance Bonus scheme 25 days holiday plus bank holidays Company pension Mobile, laptop & business expenses Additional benefits Sales Engineer / Area Sales Manager / Business Development Manager Role Develop new business and manage existing customer accounts across the UK. Promote and sell engineered pumping solutions, wastewater equipment, and fluid-handling systems into the water sector, industrial plants, food & beverage, pharmaceutical facilities, and steelworks. Provide technical sales support, including product selection, system/application advice, site surveys, and solution proposals. Prepare quotations, tenders, and commercial proposals for pump packages and associated equipment. Work closely with engineering, service, and commercial teams to ensure customer requirements are met. Attend customer sites, identify opportunities, and build long-term relationships with contractors, OEMs, utilities, and end-users. Deliver presentations, product demonstrations, and technical training where required. Office based in Peterborough for the first few months, then fully remote covering UK wide. Sales Engineer / Area Sales Manager / Business Development Manager Requirements Experience in technical sales within pumps, rotating equipment, fluid-handling equipment, water treatment systems, dosing, or related engineered products. Background as an External Sales Engineer, Technical Sales Engineer, Area Sales Manager, Key Account Manager, Business Development Manager, Sales Executive or similar. Strong understanding of pump applications, valves, compressors, rotating equipment, filtration, filters, pumping stations, pumping systems, or a similar technical product within the water, wastewater, industrial, food & beverage, pharmaceutical, or steel industries. Ability to read technical specifications, understand mechanical principles, and communicate complex engineered solutions. Proven track record in territory management, business development, and building strong customer relationships. A mechanical, process, or engineering background (degree, HNC, HND, apprenticeship) would be beneficial but not essential. Full UK driving license. Willingness to work out of the office in Peterborough for the first few months, then fully remote covering the UK. JBRP1_UKTJ
Job Description Power Electronics Engineer Full time Derby / Bristol / Hybrid An exciting opportunity has arisen for an experienced Power Electronics Engineer to join Rolls-Royce. In this role, the chosen candidate will operate within a wider power electronics team to deliver cutting edge power electronic solutions to support the growing electrification and low carbon strategies of Rolls-Royce. The role will be involved in the delivery of complex power electronic based conversion systems that allow the conditioning and control of electrical power for a number of differing applications that vary in rating from 10's of kW up to 1MW. The chosen candidate will be an experienced individual and will be able to take full ownership of their solutions from concept, through design and onto the testing and commissioning phases of each exciting project they are involved with. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing: Acting as a technical PoC for power electronic systems involved with AC to DC, DC to AC, DC to DC conversion and solid-state power controllers. Developing optimum power electronic solutions to suit the requirements of the wider electrical power system, considering the characteristics and requirements of the energy sources and loads. This will include consideration of power quality, EMC and protection aspects of the electrical power system and the interaction of the constituent parts. Taking full ownership of specific solutions and approaches from their concept stage through to design, testing and final installation to satisfy the associated requirements. This will include a range of disciplines including electrical, thermal and mechanical aspects of the design. Presenting the power electronic solutions at appropriate design review gates as the design and development activities progress. Where necessary interfacing with both internal and external customers. Driving new and innovative approaches to improve on existing traditional methods wherever possible. The capture of intellectual property and directing longer term research activities at the company's university technology centres are essential aspects of the role. Working in the power electronics team offering expert advice and mentoring younger power electronics engineers. Working across teams where necessary to ensure an optimum system solution and knowledge share. Keeping a watching brief on the latest developments in power electronics technology including semiconductor devices, gate driver technology and control methods to ensure Rolls-Royce maintains its competitive edge. Liaising with the wider international power electronics community including the global community of practice group to share knowledge and to support the development of common standards and design guidelines. What we're looking for: Being a part of Rolls-Royce you'll know we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. • At least 5 years of experience in the development, design, implementation and verification of power electronic systems. • Working knowledge of domain plant and platform interfaces, component technology and behaviour during normal and abnormal operation, verification vehicles, electrical design, system architecture, development process constraints. This will include an appreciation of power dense rotating electrical machines and battery energy storage systems. • Direct experience of the modelling and simulation tools used for designing and developing power electronic conversion systems operating within a multi-converter electrical power system. • Demonstratable experience of PCB design using Altium and/or Cadence would be an advantage. • A working appreciation of associated engineering disciplines; University degree, higher degree or equivalent. • Good time management skills able to prioritize and execute tasks in a high-pressure environment. Dynamically respond to evolving objectives and emerging opportunities while working in coordination with a multidisciplinary, energetic team of engineers and scientists • Able to research application issues and products by being outward focussed and able to seek solutions/information from outside of immediate area, including suppliers, universities, customers, related industries • Able to train people to improve the capability of the business within a specific area of the business and deliver training material where required We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. We welcome applications from people with a refugee background. You can learn more about our global Inclusion strategy at Our people Rolls-Royce Closing date: 15th December 2025 As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. Job Category Electrical and Electronics Posting Date 09 Dec 2025; 00:12 Posting End Date 15 Dec 2025PandoLogic.
Dec 11, 2025
Full time
Job Description Power Electronics Engineer Full time Derby / Bristol / Hybrid An exciting opportunity has arisen for an experienced Power Electronics Engineer to join Rolls-Royce. In this role, the chosen candidate will operate within a wider power electronics team to deliver cutting edge power electronic solutions to support the growing electrification and low carbon strategies of Rolls-Royce. The role will be involved in the delivery of complex power electronic based conversion systems that allow the conditioning and control of electrical power for a number of differing applications that vary in rating from 10's of kW up to 1MW. The chosen candidate will be an experienced individual and will be able to take full ownership of their solutions from concept, through design and onto the testing and commissioning phases of each exciting project they are involved with. Why Rolls-Royce? Rolls-Royce is one of the most enduring and iconic brands in the world and has been at the forefront of innovation for over a century. We design, build and service systems that provide critical power to customers where safety and reliability are paramount. We are proud to be a force for progress, powering, protecting and connecting people everywhere. We want to ensure that the excellence and ingenuity that has shaped our history continues into our future and we need people like you to come and join us on this journey. We'll provide an environment of caring and belonging where you can be yourself. An inclusive, innovative culture that invests in you, gives you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. What we offer We offer excellent development opportunities, a competitive salary, and exceptional benefits. These include bonus, employee support assistance and employee discounts. Your needs are as unique as you are. Hybrid working is a way in which our people can balance their time between the office, home, or another remote location. It's a locally managed and flexed informal discretionary arrangement. As a minimum we're all expected to attend the workplace for collaboration and other specific reasons, on average three days per week. What you will be doing: Acting as a technical PoC for power electronic systems involved with AC to DC, DC to AC, DC to DC conversion and solid-state power controllers. Developing optimum power electronic solutions to suit the requirements of the wider electrical power system, considering the characteristics and requirements of the energy sources and loads. This will include consideration of power quality, EMC and protection aspects of the electrical power system and the interaction of the constituent parts. Taking full ownership of specific solutions and approaches from their concept stage through to design, testing and final installation to satisfy the associated requirements. This will include a range of disciplines including electrical, thermal and mechanical aspects of the design. Presenting the power electronic solutions at appropriate design review gates as the design and development activities progress. Where necessary interfacing with both internal and external customers. Driving new and innovative approaches to improve on existing traditional methods wherever possible. The capture of intellectual property and directing longer term research activities at the company's university technology centres are essential aspects of the role. Working in the power electronics team offering expert advice and mentoring younger power electronics engineers. Working across teams where necessary to ensure an optimum system solution and knowledge share. Keeping a watching brief on the latest developments in power electronics technology including semiconductor devices, gate driver technology and control methods to ensure Rolls-Royce maintains its competitive edge. Liaising with the wider international power electronics community including the global community of practice group to share knowledge and to support the development of common standards and design guidelines. What we're looking for: Being a part of Rolls-Royce you'll know we embrace agility, are bold, pursue collaboration and seek simplicity in everything we do. These principles form our values and behaviours and are an essential component of our assessment process and are fundamental qualities that we seek for all roles. • At least 5 years of experience in the development, design, implementation and verification of power electronic systems. • Working knowledge of domain plant and platform interfaces, component technology and behaviour during normal and abnormal operation, verification vehicles, electrical design, system architecture, development process constraints. This will include an appreciation of power dense rotating electrical machines and battery energy storage systems. • Direct experience of the modelling and simulation tools used for designing and developing power electronic conversion systems operating within a multi-converter electrical power system. • Demonstratable experience of PCB design using Altium and/or Cadence would be an advantage. • A working appreciation of associated engineering disciplines; University degree, higher degree or equivalent. • Good time management skills able to prioritize and execute tasks in a high-pressure environment. Dynamically respond to evolving objectives and emerging opportunities while working in coordination with a multidisciplinary, energetic team of engineers and scientists • Able to research application issues and products by being outward focussed and able to seek solutions/information from outside of immediate area, including suppliers, universities, customers, related industries • Able to train people to improve the capability of the business within a specific area of the business and deliver training material where required We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. We welcome applications from people with a refugee background. You can learn more about our global Inclusion strategy at Our people Rolls-Royce Closing date: 15th December 2025 As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided. Job Category Electrical and Electronics Posting Date 09 Dec 2025; 00:12 Posting End Date 15 Dec 2025PandoLogic.
We are seeking a skilled Maintenance Engineer to ensure the efficient operation of equipment and systems within a food manufacturing environment. This permanent role is based in Worcestershire and offers an excellent opportunity to contribute to a high-performing engineering team. Client Details The hiring company is a reputable organisation operating within the food manufacturing industry. It is a medium-sized business with a strong focus on maintaining operational excellence and delivering quality products to its customers. Description Conduct preventive maintenance on machinery and equipment to minimise downtime. Diagnose and resolve mechanical and electrical faults efficiently. Support production teams by ensuring equipment is functioning optimally. Follow health and safety regulations to maintain a safe working environment. Collaborate with other departments to enhance overall operational performance. Maintain accurate records of maintenance activities and repairs. Assist in the installation and commissioning of new equipment. Provide recommendations for continuous improvements to machinery and systems. 4 on 4 off - Days & Nights rotating Profile You will be an experienced Maintenance Engineer, ideally from a manufacturing background, along with: Recognised engineering qualifications in engineering Ideally, 18th edition qualified Strong knowledge of mechanical and electrical systems. Proven problem-solving skills and attention to detail. Ability to work effectively as part of a team and independently. Commitment to adhering to health and safety standards. Job Offer 50,000/annum Permanent position within a reputable company in Worcestershire. Opportunity to work in a key role within the FMCG industry. Supportive company culture focused on professional development. Comprehensive benefits package. If you are a skilled Maintenance Engineer ready to take the next step in your career, we encourage you to apply today.
Dec 11, 2025
Full time
We are seeking a skilled Maintenance Engineer to ensure the efficient operation of equipment and systems within a food manufacturing environment. This permanent role is based in Worcestershire and offers an excellent opportunity to contribute to a high-performing engineering team. Client Details The hiring company is a reputable organisation operating within the food manufacturing industry. It is a medium-sized business with a strong focus on maintaining operational excellence and delivering quality products to its customers. Description Conduct preventive maintenance on machinery and equipment to minimise downtime. Diagnose and resolve mechanical and electrical faults efficiently. Support production teams by ensuring equipment is functioning optimally. Follow health and safety regulations to maintain a safe working environment. Collaborate with other departments to enhance overall operational performance. Maintain accurate records of maintenance activities and repairs. Assist in the installation and commissioning of new equipment. Provide recommendations for continuous improvements to machinery and systems. 4 on 4 off - Days & Nights rotating Profile You will be an experienced Maintenance Engineer, ideally from a manufacturing background, along with: Recognised engineering qualifications in engineering Ideally, 18th edition qualified Strong knowledge of mechanical and electrical systems. Proven problem-solving skills and attention to detail. Ability to work effectively as part of a team and independently. Commitment to adhering to health and safety standards. Job Offer 50,000/annum Permanent position within a reputable company in Worcestershire. Opportunity to work in a key role within the FMCG industry. Supportive company culture focused on professional development. Comprehensive benefits package. If you are a skilled Maintenance Engineer ready to take the next step in your career, we encourage you to apply today.
Senior Test / Development Engineer Norwich area, Norfolk Salary: £45 000 + Benefits Type: Permanent, hybrid working is possible. This role would suit an experienced test development / product development engineer that has experience with the development of complex electromechanical systems (ideally electric motors or electric drive units) and the ability to develop automated test systems (utilising Labview or similar). The Opportunity - Senior Test / Development Engineer This role offers the chance to join a growing technology company developing advanced electromechanical and electric motor / electric drive systems for electric vehicles and industrial applications. They seek an experienced test engineer or development with experience that includes: Definition, development, planning and implementation of tests (applied to a range of electric motors for electric vehicle applications or similar) The development of test requirements in conjunction with DVP and FMEAs Overseeing the set-up of test cells (Labview etc)and execution of the tests Creation of automated test systems using Labview or similar Analysis of test data, then feeding back into the product development process Use of 8D or similar problem solving and failure resolution tools. The ideal candidate would be a degree qualified test engineer or development engineer that has gained direct experience of the test / development of electric motors for use within the electric vehicle, automotive, industrial control, rail/rolling stock, or aerospace industry. Skills / Knowledge required - Senior Test / Development Engineer A degree or similar in a relevant subject (e.g., mechanical engineering, electrical engineering, automotive engineering, mechatronics, etc) At least 4 years of relevant industry experience within the test / development engineering of similar systems including the development of automated test systems. Definition, development, planning and implementation of tests in conjunction with DVP and FMEAs Overseeing the set-up of test cells and execution of the tests, analysis of test data, use of 8D or similar problem solving and failure resolution tools Experience of the test and development of electric motors / EDUs or similar (maybe ICE or hybrid systems, brakes, or other high speed rotating systems) Good organisational, planning and communication skills Previous hands-on experience of testing electric motors would be useful Good electrical engineering understanding (theory or practical) You ll join a business that values technical excellence and gives engineers the freedom to make a real impact. This is a great opportunity to develop and implement automated test systems (using Labview of similar) to enhance the efficiency of product development. This Senior Test / Development Engineer role is commutable from Norwich, Thetford, Kings Lynn, Bury St Edmonds, Great Yarmouth and Lowestoft (under an hour).
Dec 11, 2025
Full time
Senior Test / Development Engineer Norwich area, Norfolk Salary: £45 000 + Benefits Type: Permanent, hybrid working is possible. This role would suit an experienced test development / product development engineer that has experience with the development of complex electromechanical systems (ideally electric motors or electric drive units) and the ability to develop automated test systems (utilising Labview or similar). The Opportunity - Senior Test / Development Engineer This role offers the chance to join a growing technology company developing advanced electromechanical and electric motor / electric drive systems for electric vehicles and industrial applications. They seek an experienced test engineer or development with experience that includes: Definition, development, planning and implementation of tests (applied to a range of electric motors for electric vehicle applications or similar) The development of test requirements in conjunction with DVP and FMEAs Overseeing the set-up of test cells (Labview etc)and execution of the tests Creation of automated test systems using Labview or similar Analysis of test data, then feeding back into the product development process Use of 8D or similar problem solving and failure resolution tools. The ideal candidate would be a degree qualified test engineer or development engineer that has gained direct experience of the test / development of electric motors for use within the electric vehicle, automotive, industrial control, rail/rolling stock, or aerospace industry. Skills / Knowledge required - Senior Test / Development Engineer A degree or similar in a relevant subject (e.g., mechanical engineering, electrical engineering, automotive engineering, mechatronics, etc) At least 4 years of relevant industry experience within the test / development engineering of similar systems including the development of automated test systems. Definition, development, planning and implementation of tests in conjunction with DVP and FMEAs Overseeing the set-up of test cells and execution of the tests, analysis of test data, use of 8D or similar problem solving and failure resolution tools Experience of the test and development of electric motors / EDUs or similar (maybe ICE or hybrid systems, brakes, or other high speed rotating systems) Good organisational, planning and communication skills Previous hands-on experience of testing electric motors would be useful Good electrical engineering understanding (theory or practical) You ll join a business that values technical excellence and gives engineers the freedom to make a real impact. This is a great opportunity to develop and implement automated test systems (using Labview of similar) to enhance the efficiency of product development. This Senior Test / Development Engineer role is commutable from Norwich, Thetford, Kings Lynn, Bury St Edmonds, Great Yarmouth and Lowestoft (under an hour).
Job Title: Mechanical Modifications Technicians Location: East Yorkshire Hourly Pay Rate: 20.09 Paye / 27.00 Umbrella Shifts: Minimum of 40 hours a week, potentially rising to 45 hours after 12 weeks Shift Pattern: Mon - Fri 06:30 - 14:30 / 14:30 - 22:30 rotating weekly Duration: On-going contract Start Date: January 2026 Position Summary: Working at a modern Rolling Stock production facility you who will initially be engaged for the implementation of a suite of modifications for the new London Underground Stock. You will be responsible for: Carrying out mechanical and interior pre-sale modifications including underframe work Recording work via internal IT systems Carry out inspections and checks to ensure fleet reliability Identify improvements and feedback into team leader Advise and rectify any defects that are found Qualifications / Education required: Minimum requirements NVQ Level 3 or equivalent award in a Mechanical/Engineering discipline. Minimum 2 years Mechanical Rolling Stock Modifications experience Contact: Email: (url removed) Phone: (phone number removed) PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION (this is standard procedure on Rail depots) Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.
Dec 11, 2025
Contractor
Job Title: Mechanical Modifications Technicians Location: East Yorkshire Hourly Pay Rate: 20.09 Paye / 27.00 Umbrella Shifts: Minimum of 40 hours a week, potentially rising to 45 hours after 12 weeks Shift Pattern: Mon - Fri 06:30 - 14:30 / 14:30 - 22:30 rotating weekly Duration: On-going contract Start Date: January 2026 Position Summary: Working at a modern Rolling Stock production facility you who will initially be engaged for the implementation of a suite of modifications for the new London Underground Stock. You will be responsible for: Carrying out mechanical and interior pre-sale modifications including underframe work Recording work via internal IT systems Carry out inspections and checks to ensure fleet reliability Identify improvements and feedback into team leader Advise and rectify any defects that are found Qualifications / Education required: Minimum requirements NVQ Level 3 or equivalent award in a Mechanical/Engineering discipline. Minimum 2 years Mechanical Rolling Stock Modifications experience Contact: Email: (url removed) Phone: (phone number removed) PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION (this is standard procedure on Rail depots) Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise.
Mechanical Maintenance Fitter Purfleet 50 - 55k As Mechanical Fitter you will provide the necessary skills to ensure that the mechanical maintenance for all operational activities and equipment on site is carried out. You will ensure that all planned and preventative maintenance is carried out in accordance with the maintenance plans, you will be responsible for completing daily inspections including identification, reporting and rectification of faults to reduce breakdowns and improve plant reliability. Preventive Maintenance : Perform scheduled maintenance on essential cement production equipment, including mills, conveyors, and material handling systems. Regularly lubricate, clean, adjust, and replace mechanical components such as bearings, gearboxes, and drive systems. Troubleshooting & Repairs : Diagnose mechanical issues and faults in production machinery using technical manuals and diagnostic equipment. Dismantle, repair, and reassemble heavy machinery such as mills. Ensure rapid response to breakdowns to minimize production downtime. Ensure timely replacement of worn-out parts (e.g., rollers, bearings, belts) to avoid production delays. Equipment Monitoring & Performance Optimization : Monitor the condition and performance of key mechanical systems using condition-based maintenance techniques (vibration analysis, thermography, etc.). Work closely with plant operators to identify performance issues and take proactive steps to maintain optimal equipment efficiency, with minimal downtime or defects. Shutdown and Overhaul Projects : Assist in the planning and execution of major plant shutdowns and overhauls, ensuring that all mechanical work is completed safely and on schedule. Overhaul or replace key components of large-scale equipment, such as mill internals and other large rotating machinery, during shutdown periods. Safe and effective use of resources. Recordkeeping & Reporting : Keep detailed records of maintenance tasks performed, including parts used, repairs made, and preventive maintenance schedules. Technical Skills : Expertise in the maintenance and repair of cement production machinery, including mills, and conveyors. Strong understanding of mechanical systems such as hydraulics, pneumatics, gearboxes, and drive systems commonly used in cement plants. Proficiency in reading technical drawings, mechanical schematics, and equipment manuals. Familiarity with predictive maintenance techniques such as vibration analysis and thermography. Problem-Solving Abilities : Ability to quickly diagnose mechanical failures and develop effective repair solutions. Strong analytical skills for troubleshooting complex mechanical systems Education and Experience : Operational Knowledge of the production plants. Certified mobile plant driving licenses (Forklift, Bobcat & Loading shovel, MEWP). Preventive maintenance techniques and practices. Thorough Understanding of Health and Safety, Environmental and Quality requirements. Systematic approach to problem solving and solution finding. Full understanding of electrical isolation and permitting procedures. To have served a recognized apprenticeship in Mechanical or welding and fabrication disciplines. Possess fault finding skills. Basic planning skills For more information please call David on (phone number removed) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Dec 10, 2025
Full time
Mechanical Maintenance Fitter Purfleet 50 - 55k As Mechanical Fitter you will provide the necessary skills to ensure that the mechanical maintenance for all operational activities and equipment on site is carried out. You will ensure that all planned and preventative maintenance is carried out in accordance with the maintenance plans, you will be responsible for completing daily inspections including identification, reporting and rectification of faults to reduce breakdowns and improve plant reliability. Preventive Maintenance : Perform scheduled maintenance on essential cement production equipment, including mills, conveyors, and material handling systems. Regularly lubricate, clean, adjust, and replace mechanical components such as bearings, gearboxes, and drive systems. Troubleshooting & Repairs : Diagnose mechanical issues and faults in production machinery using technical manuals and diagnostic equipment. Dismantle, repair, and reassemble heavy machinery such as mills. Ensure rapid response to breakdowns to minimize production downtime. Ensure timely replacement of worn-out parts (e.g., rollers, bearings, belts) to avoid production delays. Equipment Monitoring & Performance Optimization : Monitor the condition and performance of key mechanical systems using condition-based maintenance techniques (vibration analysis, thermography, etc.). Work closely with plant operators to identify performance issues and take proactive steps to maintain optimal equipment efficiency, with minimal downtime or defects. Shutdown and Overhaul Projects : Assist in the planning and execution of major plant shutdowns and overhauls, ensuring that all mechanical work is completed safely and on schedule. Overhaul or replace key components of large-scale equipment, such as mill internals and other large rotating machinery, during shutdown periods. Safe and effective use of resources. Recordkeeping & Reporting : Keep detailed records of maintenance tasks performed, including parts used, repairs made, and preventive maintenance schedules. Technical Skills : Expertise in the maintenance and repair of cement production machinery, including mills, and conveyors. Strong understanding of mechanical systems such as hydraulics, pneumatics, gearboxes, and drive systems commonly used in cement plants. Proficiency in reading technical drawings, mechanical schematics, and equipment manuals. Familiarity with predictive maintenance techniques such as vibration analysis and thermography. Problem-Solving Abilities : Ability to quickly diagnose mechanical failures and develop effective repair solutions. Strong analytical skills for troubleshooting complex mechanical systems Education and Experience : Operational Knowledge of the production plants. Certified mobile plant driving licenses (Forklift, Bobcat & Loading shovel, MEWP). Preventive maintenance techniques and practices. Thorough Understanding of Health and Safety, Environmental and Quality requirements. Systematic approach to problem solving and solution finding. Full understanding of electrical isolation and permitting procedures. To have served a recognized apprenticeship in Mechanical or welding and fabrication disciplines. Possess fault finding skills. Basic planning skills For more information please call David on (phone number removed) Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.
Ernest Gordon Recruitment
Leominster, Herefordshire
Maintenance Engineer (Engineering Qualifications) £45,000 - £46,000 + Training + Progression + Days Based + Qualifications + Life Assurance Leominster Are you a Maintenance Engineer with engineering qualifications looking for a secure, days-based role for a stable and long-standing manufacturer with the opportunity to progress your career to Senior Engineer roles? On offer is the opportunity to work in a varied role where you will be an integral member of the team, working alongside other engineers carrying out preventative and reactive maintenance, ensuring minimal downtime and the smooth running of the plant. This company are market leading manufacturer, recognized for its innovation, high-quality standards, and dedication to sustainability. With a strong focus on growth and employee development, they renowned for their staff development. This role would suit a Maintenance Engineer with engineering qualifications, looking to join a successful business that will enable your success and growth. The Role Minimise plant downtime Preventative and reactive maintenance Assisting with Internal Projects Ensure health and safety standards are obtained 7-week rotating shift pattern with early (05:30-13:30) and late (10:00-18:00) weekday shifts, with occasional weekends & paid overtime The Person Maintenance Engineer or similar Engineering qualifications Reference Number: BBBH22624a Maintenance Engineer, Mechanical, Electrical, Multi-Skilled Maintenance Engineer, Engineer, Engineering, Maintenance, Manufacturing, Shobdon, Ledbury, Leominster If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ
Dec 10, 2025
Full time
Maintenance Engineer (Engineering Qualifications) £45,000 - £46,000 + Training + Progression + Days Based + Qualifications + Life Assurance Leominster Are you a Maintenance Engineer with engineering qualifications looking for a secure, days-based role for a stable and long-standing manufacturer with the opportunity to progress your career to Senior Engineer roles? On offer is the opportunity to work in a varied role where you will be an integral member of the team, working alongside other engineers carrying out preventative and reactive maintenance, ensuring minimal downtime and the smooth running of the plant. This company are market leading manufacturer, recognized for its innovation, high-quality standards, and dedication to sustainability. With a strong focus on growth and employee development, they renowned for their staff development. This role would suit a Maintenance Engineer with engineering qualifications, looking to join a successful business that will enable your success and growth. The Role Minimise plant downtime Preventative and reactive maintenance Assisting with Internal Projects Ensure health and safety standards are obtained 7-week rotating shift pattern with early (05:30-13:30) and late (10:00-18:00) weekday shifts, with occasional weekends & paid overtime The Person Maintenance Engineer or similar Engineering qualifications Reference Number: BBBH22624a Maintenance Engineer, Mechanical, Electrical, Multi-Skilled Maintenance Engineer, Engineer, Engineering, Maintenance, Manufacturing, Shobdon, Ledbury, Leominster If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ
CNC Machinist/Operator East Kilbride Talent Media are delighted to be working in partnership with a leading precision engineering business that specialises in delivering world-class machining solutions to a global client base across Oil & Gas, Defence, Aerospace, Renewables and more. Due to continued growth and investment, we are supporting them in the recruitment of CNC Machinists/Operators to join their expanding team. The Role Reporting directly to the Operations Manager, this is a key position where you will: Set, operate and program CNC machines (mills, lathes, routers) to produce precision parts. Read and interpret complex technical drawings and CAD models. Perform first-off and in-process inspections to maintain tight tolerances. Create/modify CNC programs using CAM software. Work with a variety of materials, fixtures, and precision measuring tools. Collaborate with engineering and quality teams to meet demanding project deadlines. Uphold the highest safety and quality standards, driving a culture of continuous improvement. What Were Looking For Proven experience as a CNC Machinist/Operator (minimum 3 years preferred). Proficiency with CNC programming and CAM software. Strong ability to interpret engineering drawings and GD&T. Experience with tight-tolerance, high-precision components (0.005mm or better). Mazak experience and Oil & Gas exposure highly beneficial. HNC Mechanical Engineering desirable but not essential. Flexibility to work a rotating day/night shift pattern. Shift Patterns & Pay 2 weeks day shift: MonThurs 7am3pm, Fri 7am2:30pm 2 weeks night shift: MonWed 9pm7am, Thurs 9:30pm7am Constant night shift option available Day shift rate: £20.68 per hour Night shift rate: x1.33 (£27.50 approx.) Overtime: 1.5x (days), 1.75x (nights), weekend overtime at 2x rate 37.5 hour week Benefits Enhanced pension contributions Sick pay Private healthcare Cycle to work scheme Nursery vouchers Holiday purchase (up to 5 extra days) Enhanced training & apprenticeships (including Six Sigma & leadership development) Employee referral incentives This is an outstanding opportunity to join a forward-thinking, state-of-the-art precision engineering organisation at a time of significant investment and growth. JBRP1_UKTJ
Dec 10, 2025
Full time
CNC Machinist/Operator East Kilbride Talent Media are delighted to be working in partnership with a leading precision engineering business that specialises in delivering world-class machining solutions to a global client base across Oil & Gas, Defence, Aerospace, Renewables and more. Due to continued growth and investment, we are supporting them in the recruitment of CNC Machinists/Operators to join their expanding team. The Role Reporting directly to the Operations Manager, this is a key position where you will: Set, operate and program CNC machines (mills, lathes, routers) to produce precision parts. Read and interpret complex technical drawings and CAD models. Perform first-off and in-process inspections to maintain tight tolerances. Create/modify CNC programs using CAM software. Work with a variety of materials, fixtures, and precision measuring tools. Collaborate with engineering and quality teams to meet demanding project deadlines. Uphold the highest safety and quality standards, driving a culture of continuous improvement. What Were Looking For Proven experience as a CNC Machinist/Operator (minimum 3 years preferred). Proficiency with CNC programming and CAM software. Strong ability to interpret engineering drawings and GD&T. Experience with tight-tolerance, high-precision components (0.005mm or better). Mazak experience and Oil & Gas exposure highly beneficial. HNC Mechanical Engineering desirable but not essential. Flexibility to work a rotating day/night shift pattern. Shift Patterns & Pay 2 weeks day shift: MonThurs 7am3pm, Fri 7am2:30pm 2 weeks night shift: MonWed 9pm7am, Thurs 9:30pm7am Constant night shift option available Day shift rate: £20.68 per hour Night shift rate: x1.33 (£27.50 approx.) Overtime: 1.5x (days), 1.75x (nights), weekend overtime at 2x rate 37.5 hour week Benefits Enhanced pension contributions Sick pay Private healthcare Cycle to work scheme Nursery vouchers Holiday purchase (up to 5 extra days) Enhanced training & apprenticeships (including Six Sigma & leadership development) Employee referral incentives This is an outstanding opportunity to join a forward-thinking, state-of-the-art precision engineering organisation at a time of significant investment and growth. JBRP1_UKTJ
Multiskilled Maintenance Engineer / Mechanical Maintenance Engineer / Electrical Maintenance Engineer required to join a manufacturer of industrial systems and process equipment based in Sheffield. The successful Maintenance Engineer will be responsible for the installation, repair, and preventive maintenance of electrical and mechanical systems across a manufacturing site. This is a shift-based role working on a wide range of production and facility equipment. You'll have experience with pumps, rotating equipment, and mechanical overhauls, alongside exposure to electrical systems, PLCs, and general fault finding. Apprentice training and NVQ Level 3 qualifications are required. Package £45,000 depending on experience Based in Sheffield Shift patterns are a two-week rotation 6am-2pm and 2pm-10pm Key Responsibilities Carry out planned and reactive maintenance on mechanical and electrical equipment Strip down, repair, and rebuild pumps, valves, motors, and production systems Support installation, commissioning, and improvement of plant equipment Maintain accurate maintenance logs and spare parts usage Work within safety, quality, and environmental compliance frameworks Shift patterns are a two-week rotation 6am-2pm and 2pm-10pm Requirements Apprentice trained with NVQ Level 3 in Mechanical or Electrical Engineering Proven experience in maintaining industrial machinery and rotating equipment Confident with pump maintenance, bearing and seal replacements, and fault finding Bonus experience: basic welding, electrical maintenance, PLC programming (Allen Bradley/Siemens) Must be commutable to Sheffield
Dec 10, 2025
Full time
Multiskilled Maintenance Engineer / Mechanical Maintenance Engineer / Electrical Maintenance Engineer required to join a manufacturer of industrial systems and process equipment based in Sheffield. The successful Maintenance Engineer will be responsible for the installation, repair, and preventive maintenance of electrical and mechanical systems across a manufacturing site. This is a shift-based role working on a wide range of production and facility equipment. You'll have experience with pumps, rotating equipment, and mechanical overhauls, alongside exposure to electrical systems, PLCs, and general fault finding. Apprentice training and NVQ Level 3 qualifications are required. Package £45,000 depending on experience Based in Sheffield Shift patterns are a two-week rotation 6am-2pm and 2pm-10pm Key Responsibilities Carry out planned and reactive maintenance on mechanical and electrical equipment Strip down, repair, and rebuild pumps, valves, motors, and production systems Support installation, commissioning, and improvement of plant equipment Maintain accurate maintenance logs and spare parts usage Work within safety, quality, and environmental compliance frameworks Shift patterns are a two-week rotation 6am-2pm and 2pm-10pm Requirements Apprentice trained with NVQ Level 3 in Mechanical or Electrical Engineering Proven experience in maintaining industrial machinery and rotating equipment Confident with pump maintenance, bearing and seal replacements, and fault finding Bonus experience: basic welding, electrical maintenance, PLC programming (Allen Bradley/Siemens) Must be commutable to Sheffield
Join Our Team as a Senior Mechanical Design Engineer! At Severn Trent, our people are at the heart of everything we do. We're in the top 5% of utility companies worldwide when it comes to employee engagement and ranked as a Top 50 UK Employer on Glassdoor. Join us in making a positive impact on the environment and our communities, while being valued and supported in a truly inclusive workplace. Our ambitious five-year programme, featuring over 5,000 innovative projects, is dedicated to overcoming the challenges of delivering exceptional water and waste services. With our dedicated in-house design team, we are set to achieve outstanding results and make a significant impact. About the Role We're looking for a talented Senior Mechanical Design Engineer to join our team in Derby. In this role, you'll design innovative technical solutions for Severn Trent Water's assets and infrastructure-covering everything from feasibility studies to detailed design, construction, testing, commissioning, and handover. No two days will be the same! You'll work on a wide variety of projects, including health & safety improvements, pumping systems, rotating machinery, hydraulics, and more. You'll also play a key part in fulfilling Severn Trent's responsibilities as Principal Designer under CDM regulations. Key Responsibilities Collaborate with internal and external stakeholders to understand business challenges and develop solutions. Define design milestones and support project managers in delivering successful outcomes. Carry out feasibility studies and conceptual design appraisals to create efficient, cost-effective solutions. Ensure compliance with design standards, assurance processes, and CDM regulations. Coach and mentor team members to build capability. Approve designs from internal and external sources. WHAT YOU'LL BRING You'll be degree qualified (desirable) and showing your professional commitment as a member of one of the engineering Institutions or actively working towards incorporated or chartered status, a journey which we are keen to support you on. Having water sector experience or similar (Petrochem / Pharmaceutical / Food / Aerospace / Power) would be required. Extensive experience of working closely with supply chain in delivering projects (with emphasis on adherence to CDM design specification, H&S, outputs, and quality) would be advantageous. A full UK driving licence will be essential. Of course, it's important that we attract the right skill sets, and those with the right experience but we value character, positivity and a caring attitude in equal weight. WHAT'S IN IT FOR YOU Working here isn't just a job. You can build a career at Severn Trent. We'll reward you for it, too. We have a range of benefits that recognise great work, and award-winning training to help you reach your potential. Here are just some of our favourite's perks that you'll get being part of the Seven Trent family: 28 days holiday + bank holidays (and the ability to buy/ sell up to 5 days per year) Annual bonus scheme (of up to £2,250, which is subject to eligibility) Leading pension scheme - we will double your contribution (up to 15% when you contribute 7.5%) Sharesave - the chance to buy Severn Trent Plc shares at a discounted rate Dedicated training and development with our Academy Electric vehicle scheme and retail offers Family friendly policies Two paid volunteering days per year WHATS NEXT? We can't wait to hear from you. Before you apply, you'll need an updated copy of your CV and about five minutes to spare. We'll always let you know the outcome of your application after the closing date - so keep an eye on your phone and emails! And if your curiosity has peaked and you're wanting to find out even more, search on social media.
Dec 10, 2025
Full time
Join Our Team as a Senior Mechanical Design Engineer! At Severn Trent, our people are at the heart of everything we do. We're in the top 5% of utility companies worldwide when it comes to employee engagement and ranked as a Top 50 UK Employer on Glassdoor. Join us in making a positive impact on the environment and our communities, while being valued and supported in a truly inclusive workplace. Our ambitious five-year programme, featuring over 5,000 innovative projects, is dedicated to overcoming the challenges of delivering exceptional water and waste services. With our dedicated in-house design team, we are set to achieve outstanding results and make a significant impact. About the Role We're looking for a talented Senior Mechanical Design Engineer to join our team in Derby. In this role, you'll design innovative technical solutions for Severn Trent Water's assets and infrastructure-covering everything from feasibility studies to detailed design, construction, testing, commissioning, and handover. No two days will be the same! You'll work on a wide variety of projects, including health & safety improvements, pumping systems, rotating machinery, hydraulics, and more. You'll also play a key part in fulfilling Severn Trent's responsibilities as Principal Designer under CDM regulations. Key Responsibilities Collaborate with internal and external stakeholders to understand business challenges and develop solutions. Define design milestones and support project managers in delivering successful outcomes. Carry out feasibility studies and conceptual design appraisals to create efficient, cost-effective solutions. Ensure compliance with design standards, assurance processes, and CDM regulations. Coach and mentor team members to build capability. Approve designs from internal and external sources. WHAT YOU'LL BRING You'll be degree qualified (desirable) and showing your professional commitment as a member of one of the engineering Institutions or actively working towards incorporated or chartered status, a journey which we are keen to support you on. Having water sector experience or similar (Petrochem / Pharmaceutical / Food / Aerospace / Power) would be required. Extensive experience of working closely with supply chain in delivering projects (with emphasis on adherence to CDM design specification, H&S, outputs, and quality) would be advantageous. A full UK driving licence will be essential. Of course, it's important that we attract the right skill sets, and those with the right experience but we value character, positivity and a caring attitude in equal weight. WHAT'S IN IT FOR YOU Working here isn't just a job. You can build a career at Severn Trent. We'll reward you for it, too. We have a range of benefits that recognise great work, and award-winning training to help you reach your potential. Here are just some of our favourite's perks that you'll get being part of the Seven Trent family: 28 days holiday + bank holidays (and the ability to buy/ sell up to 5 days per year) Annual bonus scheme (of up to £2,250, which is subject to eligibility) Leading pension scheme - we will double your contribution (up to 15% when you contribute 7.5%) Sharesave - the chance to buy Severn Trent Plc shares at a discounted rate Dedicated training and development with our Academy Electric vehicle scheme and retail offers Family friendly policies Two paid volunteering days per year WHATS NEXT? We can't wait to hear from you. Before you apply, you'll need an updated copy of your CV and about five minutes to spare. We'll always let you know the outcome of your application after the closing date - so keep an eye on your phone and emails! And if your curiosity has peaked and you're wanting to find out even more, search on social media.
4on4off - Rotating Days & Nights 7am-7pm/7pm-7am Pay Rate - 12.79ph to start, rising to 14.54ph once trained Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY25, our shared passion helped us achieve revenues of 1.95bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. Here at Leeds we make just over 40% of all UK frozen Yorkshire puddings; making us one of the UK's largest suppliers of frozen Yorkshire puddings to Asda, Morrisons & Tesco to name a few! What you'll be doing The Machine Operator will work in partnership with Line Support Operators, Hygiene Operatives, Shift Managers and members of the Engineering team to ensure the safe and efficient running of operational assets. Machinery/asset troubleshooting, condition monitoring and maintenance. Resolve mechanical and procedural issues. Completion and sign off of quality documentation. Adherence to good manufacturing practices. Improve quality and line efficiencies by means of interpretation of production plans through knowledge and understanding of product, equipment, planning and manning (training will be provided). Consider health, safety, environmental and quality issues and their implications. Demonstrate a positive attitude to training and personal development. Checking of critical control points for product safety and quality control points and responsible for all corrective actions. What we're looking for Good understanding of both spoken & written English. You will also have strong attention to detail and good organisational skills. Experience troubleshooting and maintenance on Factory machinery is required. Experience working within a Food Manufacturer environment is preferred but not essential. Able to work both day shift and night shift as this role will involve shifts alternating after each shift. We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. What you'll get in return Competitive salary and job-related benefits Holidays Pension up to 8% matched Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform
Dec 10, 2025
Full time
4on4off - Rotating Days & Nights 7am-7pm/7pm-7am Pay Rate - 12.79ph to start, rising to 14.54ph once trained Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY25, our shared passion helped us achieve revenues of 1.95bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. Here at Leeds we make just over 40% of all UK frozen Yorkshire puddings; making us one of the UK's largest suppliers of frozen Yorkshire puddings to Asda, Morrisons & Tesco to name a few! What you'll be doing The Machine Operator will work in partnership with Line Support Operators, Hygiene Operatives, Shift Managers and members of the Engineering team to ensure the safe and efficient running of operational assets. Machinery/asset troubleshooting, condition monitoring and maintenance. Resolve mechanical and procedural issues. Completion and sign off of quality documentation. Adherence to good manufacturing practices. Improve quality and line efficiencies by means of interpretation of production plans through knowledge and understanding of product, equipment, planning and manning (training will be provided). Consider health, safety, environmental and quality issues and their implications. Demonstrate a positive attitude to training and personal development. Checking of critical control points for product safety and quality control points and responsible for all corrective actions. What we're looking for Good understanding of both spoken & written English. You will also have strong attention to detail and good organisational skills. Experience troubleshooting and maintenance on Factory machinery is required. Experience working within a Food Manufacturer environment is preferred but not essential. Able to work both day shift and night shift as this role will involve shifts alternating after each shift. We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. What you'll get in return Competitive salary and job-related benefits Holidays Pension up to 8% matched Life insurance up to 4x salary Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform
Multi Skilled Engineer - Elec or Mech Bias Our client is a leading food manufacturing business, supplying into a range of retailers wholesalers. We're working in partnership to assist them in recruiting a Multi Skilled Engineer to join their Engineering team. This is a fantastic opportunity to join a business who are investing heavily and growing. They can offer genuine career development and progression. Role Purpose: To provide Engineering resource in carrying out planned and reactive maintenance activities to minimise downtime and reduce quality issues. To strive towards Continuous improvement of machinery equipment and ways of working in line with the business strategy. You'll need to have similar food or FMCG experience. All experience considered as full machine and product training given, along with an in-depth on-boarding programme. The company will also fund further engineering training / courses as required. Early & Late rotating shift pattern Monday to Friday - 6am-2.15pm / 2pm-10.15pm Overtime is available Fantastic benefits including Bonus scheme, matched Private Pension, 25 days Holiday + BH's, Medical cash plan Summary of core responsibilities Fault diagnosis at breakdown repairs of plant machinery & equipment Adherence to statutory checks and GMP Involvement in various engineering & capital projects Upkeep of stores and engineering documentation Assist supporting and training of relevant employees in all aspects of shared maintenance To take training and up-skillprogramme as directed by business needs Deliver effective communication at team reviews, engineering meetings and shift handovers Required skills & experience Ideally Mech Bias, but Multi skilled. This role would be perfect for an engineer who is happy to be hands-on, but also carry out machine condition monitoring, asset care management & project work. Strong mechanical fault finding & repairs skills - hydraulics, gearboxes, bearings, shafts, drives. NVQ Level 3 / ONC / HNC Engineering
Dec 10, 2025
Full time
Multi Skilled Engineer - Elec or Mech Bias Our client is a leading food manufacturing business, supplying into a range of retailers wholesalers. We're working in partnership to assist them in recruiting a Multi Skilled Engineer to join their Engineering team. This is a fantastic opportunity to join a business who are investing heavily and growing. They can offer genuine career development and progression. Role Purpose: To provide Engineering resource in carrying out planned and reactive maintenance activities to minimise downtime and reduce quality issues. To strive towards Continuous improvement of machinery equipment and ways of working in line with the business strategy. You'll need to have similar food or FMCG experience. All experience considered as full machine and product training given, along with an in-depth on-boarding programme. The company will also fund further engineering training / courses as required. Early & Late rotating shift pattern Monday to Friday - 6am-2.15pm / 2pm-10.15pm Overtime is available Fantastic benefits including Bonus scheme, matched Private Pension, 25 days Holiday + BH's, Medical cash plan Summary of core responsibilities Fault diagnosis at breakdown repairs of plant machinery & equipment Adherence to statutory checks and GMP Involvement in various engineering & capital projects Upkeep of stores and engineering documentation Assist supporting and training of relevant employees in all aspects of shared maintenance To take training and up-skillprogramme as directed by business needs Deliver effective communication at team reviews, engineering meetings and shift handovers Required skills & experience Ideally Mech Bias, but Multi skilled. This role would be perfect for an engineer who is happy to be hands-on, but also carry out machine condition monitoring, asset care management & project work. Strong mechanical fault finding & repairs skills - hydraulics, gearboxes, bearings, shafts, drives. NVQ Level 3 / ONC / HNC Engineering
Shift Maintenance Engineer (Electrically Biased) Location: Parham Salary: £48,000 £51,000 Shifts: Rotating shifts Contract: Full-time, Permanent A well-established global manufacturing organisation is looking for a multiskilled Shift Maintenance Engineer, electrically biased, to support production operations on rotating shifts. The role is focused on ensuring high equipment reliability, rapid response to breakdowns, and effective engineering support to keep 24/7 production running smoothly. This position involves hands-on maintenance, problem-solving, and working closely with production teams to deliver continuous improvements and operational efficiency. Key Responsibilities Maintain and ensure availability of production and ancillary equipment throughout the shift. Serve as the first point of contact for operators when technical or process issues arise. Support shift leaders by addressing daily engineering concerns quickly and effectively. Carry out planned preventative maintenance and contribute to the ongoing development of the sites CMMS. Perform unplanned/reactive maintenance to minimise downtime and maintain optimum production output. Conduct root-cause fault-finding, resolving underlying issues rather than short-term fixes. Assist with installation, commissioning, and optimisation of new equipment and processes. Identify and promote equipment and process improvements. Collaborate effectively with colleagues across engineering, production, design, logistics, and supply chain. Ensure compliance with all Health & Safety legislation and site standards. Provide guidance, mentoring, and basic training to operators and apprentices. Skills, Experience & Qualifications Completed apprenticeship or equivalent qualification in electrical, mechanical, or maintenance engineering. Previous maintenance experience within a manufacturing environment is essential. 18th Edition qualified (desirable); candidates without this must be competent with single-phase systems. Experience working with three-phase systems, control panels, motors, and motor starters desirable. Experience with variable speed drives is an advantage. Familiarity with hydraulics, pneumatics, and mechanical drive systems. Able to dismantle, repair, and reassemble machinery confidently. Strong analytical and diagnostic skills, able to resolve complex engineering issues independently. Self-motivated, proactive, and capable of working both independently and within a team. Knowledge of polymer processing technology is beneficial. Competent computer skills, including MS Word, Excel, and experience with CMMS systems (e.g., Pirana). Confident decision-maker with the judgement to know when to seek additional support. Benefits 25 days plus bank holidays Opportunity to buy flex days Employees are automatically enrolled into the scheme on joining and the company pays in 6% of gross salary Paid for membership to AXA Health Opportunity for 5 days of paid leave a year to spend on voluntary work for the community - Opportunity to donate twice the amount of your gift, making the total contribution to a charity organization three times your original donation Minimum of 4 events per year to support you in your wellbeing. Social health - Mental health - Physical health - Financial health Fantastic opportunity to join a global growing organisation! JBRP1_UKTJ
Dec 10, 2025
Full time
Shift Maintenance Engineer (Electrically Biased) Location: Parham Salary: £48,000 £51,000 Shifts: Rotating shifts Contract: Full-time, Permanent A well-established global manufacturing organisation is looking for a multiskilled Shift Maintenance Engineer, electrically biased, to support production operations on rotating shifts. The role is focused on ensuring high equipment reliability, rapid response to breakdowns, and effective engineering support to keep 24/7 production running smoothly. This position involves hands-on maintenance, problem-solving, and working closely with production teams to deliver continuous improvements and operational efficiency. Key Responsibilities Maintain and ensure availability of production and ancillary equipment throughout the shift. Serve as the first point of contact for operators when technical or process issues arise. Support shift leaders by addressing daily engineering concerns quickly and effectively. Carry out planned preventative maintenance and contribute to the ongoing development of the sites CMMS. Perform unplanned/reactive maintenance to minimise downtime and maintain optimum production output. Conduct root-cause fault-finding, resolving underlying issues rather than short-term fixes. Assist with installation, commissioning, and optimisation of new equipment and processes. Identify and promote equipment and process improvements. Collaborate effectively with colleagues across engineering, production, design, logistics, and supply chain. Ensure compliance with all Health & Safety legislation and site standards. Provide guidance, mentoring, and basic training to operators and apprentices. Skills, Experience & Qualifications Completed apprenticeship or equivalent qualification in electrical, mechanical, or maintenance engineering. Previous maintenance experience within a manufacturing environment is essential. 18th Edition qualified (desirable); candidates without this must be competent with single-phase systems. Experience working with three-phase systems, control panels, motors, and motor starters desirable. Experience with variable speed drives is an advantage. Familiarity with hydraulics, pneumatics, and mechanical drive systems. Able to dismantle, repair, and reassemble machinery confidently. Strong analytical and diagnostic skills, able to resolve complex engineering issues independently. Self-motivated, proactive, and capable of working both independently and within a team. Knowledge of polymer processing technology is beneficial. Competent computer skills, including MS Word, Excel, and experience with CMMS systems (e.g., Pirana). Confident decision-maker with the judgement to know when to seek additional support. Benefits 25 days plus bank holidays Opportunity to buy flex days Employees are automatically enrolled into the scheme on joining and the company pays in 6% of gross salary Paid for membership to AXA Health Opportunity for 5 days of paid leave a year to spend on voluntary work for the community - Opportunity to donate twice the amount of your gift, making the total contribution to a charity organization three times your original donation Minimum of 4 events per year to support you in your wellbeing. Social health - Mental health - Physical health - Financial health Fantastic opportunity to join a global growing organisation! JBRP1_UKTJ
Senior Mechanical Design Engineer £50 - £55k Are you a Mechanical Design Engineer with a passion for solving complex engineering challenges? We're looking for an experienced engineer to join a forward-thinking team designing large rotating components and mechanical systems for high-performance industrial applications click apply for full job details
Dec 10, 2025
Full time
Senior Mechanical Design Engineer £50 - £55k Are you a Mechanical Design Engineer with a passion for solving complex engineering challenges? We're looking for an experienced engineer to join a forward-thinking team designing large rotating components and mechanical systems for high-performance industrial applications click apply for full job details
Pertemps West Bromwich are recruiting for a hands-on, electrically minded Maintenance Engineer to join a fast-paced, automated manufacturing facility near Birmingham. The company operates a modern production plant with advanced machinery, robotics, lasers, and material handling systems. As a Maintenance Engineer, you will play a key role in keeping the facility running smoothly. You will diagnose faults, carry out repairs, perform preventative maintenance, and ensure all equipment operates efficiently and safely to support continuous production. Key Responsibilities: Maintain electrical, hydraulic, and pneumatic systems across machinery, robotics, lasers, and ancillary equipment. Perform fault-finding, repairs, and routine maintenance to minimise downtime. Implement and maintain proactive maintenance systems (PPM / TPM). Conduct root cause analysis to provide first-time fixes. Perform safety checks and adhere to HSE and LOTO procedures. Replace and repair parts (bearings, filters, wiring, valves, gauges, switches, etc.). Adjust and test machinery performance after maintenance. Support continuous improvement initiatives and recommend process/equipment enhancements. Participate in emergency call-outs as required. Experience / Skills Required: Hands-on experience in high-volume, fast-paced automated manufacturing. Strong electrical knowledge, alongside mechanical and hydraulic skills. Experience with robotics (KUKA, Fanuc, etc.) is essential. Understanding of IATF16949 / ISO9001 quality standards. Flexible team player, able to work rotating shifts and respond to emergency call-outs. Hours & Salary: Shift Pattern: Rotating shifts: 06:00-14:00 / 14:00-22:00 / 22:00-06:00. Annual Salary: £42,387. This is an excellent opportunity for a hands-on, electrically focused engineer to join a forward-thinking manufacturing facility, working with cutting-edge automated technology in a supportive engineering team. Immediate start available, apply now!
Dec 10, 2025
Full time
Pertemps West Bromwich are recruiting for a hands-on, electrically minded Maintenance Engineer to join a fast-paced, automated manufacturing facility near Birmingham. The company operates a modern production plant with advanced machinery, robotics, lasers, and material handling systems. As a Maintenance Engineer, you will play a key role in keeping the facility running smoothly. You will diagnose faults, carry out repairs, perform preventative maintenance, and ensure all equipment operates efficiently and safely to support continuous production. Key Responsibilities: Maintain electrical, hydraulic, and pneumatic systems across machinery, robotics, lasers, and ancillary equipment. Perform fault-finding, repairs, and routine maintenance to minimise downtime. Implement and maintain proactive maintenance systems (PPM / TPM). Conduct root cause analysis to provide first-time fixes. Perform safety checks and adhere to HSE and LOTO procedures. Replace and repair parts (bearings, filters, wiring, valves, gauges, switches, etc.). Adjust and test machinery performance after maintenance. Support continuous improvement initiatives and recommend process/equipment enhancements. Participate in emergency call-outs as required. Experience / Skills Required: Hands-on experience in high-volume, fast-paced automated manufacturing. Strong electrical knowledge, alongside mechanical and hydraulic skills. Experience with robotics (KUKA, Fanuc, etc.) is essential. Understanding of IATF16949 / ISO9001 quality standards. Flexible team player, able to work rotating shifts and respond to emergency call-outs. Hours & Salary: Shift Pattern: Rotating shifts: 06:00-14:00 / 14:00-22:00 / 22:00-06:00. Annual Salary: £42,387. This is an excellent opportunity for a hands-on, electrically focused engineer to join a forward-thinking manufacturing facility, working with cutting-edge automated technology in a supportive engineering team. Immediate start available, apply now!
Are you an experienced Principal Mechanical Engineer who enjoys solving complex technical problems, improving asset reliability and ensuring engineering systems are safe and compliant? If youre looking for a role with real impact across one of the UKs most unique and high-profile infrastructure environments, this could be the perfect opportunity. Were supporting a major organisation responsible for engineering governance, assurance and asset management across a large, highly regulated maritime estate in Portsmouth. Youll join a specialist team of senior engineers who support mission-critical mechanical and saltwater systems, working in an environment where no two days are the same. Whats the role all about? As a Principal Mechanical Engineer, youll be a key part of the Engineering, Assurance & Compliance team, providing technical leadership across mechanical systems, rotating machinery, hydraulic systems and saltwater infrastructure. Youll take ownership of complex engineering challenges, drive safe-to-operate assurance, and make sure assets are managed, maintained and developed in line with statutory and regulatory requirements. In this role, you will: Provide engineering governance and assurance for mechanical and saltwater systems Own technical issues, produce safety management systems and unblock engineering problems Review asset condition and present findings to asset owners Support the development and implementation of maintenance strategies (including Condition & Risk-Based Maintenance) Contribute to updates of Asset Management Plans and long-term improvement strategies Collaborate with engineering teams to drive solutions and continuous improvement Support efforts aligned with Net Zero Carbon engineering strategies This is a senior-level engineering role where your decisions genuinely influence safety, reliability and strategic infrastructure planning. What youll bring To succeed as a Principal Mechanical Engineer, youll need: Degree in Mechanical Engineering (or equivalent) Chartered status or working toward chartership (CEng preferred) Significant experience in mechanical engineering within a regulated or infrastructure environment Strong technical understanding of saltwater systems, hydraulic systems, rotating machinery Experience creating and implementing maintenance strategies Ability to balance systems-level thinking with component-level detail Knowledge of compliance requirements for mechanical systems within built or maritime estates Excellent communication, presentation and stakeholder-management skills Who you are Youre a confident and influential engineer who enjoys taking ownership, solving problems and supporting others. You think strategically, can explain complex engineering concepts clearly, and work well with both senior stakeholders and technical teams. Youll be: Organised and proactive Engaging and collaborative Skilled at communicating technical information Driven by quality, safety and continuous improvement Whats in it for you? £60,000£68,000 salary 25 days holiday + bank holidays Enhanced pension scheme Life assurance Group income protection Internal benefits & discounts programme Cycle to Work scheme Professional development & career progression Wellbeing & occupational health services Reward & recognition initiatives Ready to take the next step? If youre an experienced Principal Mechanical Engineer looking for a role where your expertise truly makes an impact, wed love to hear from you. Apply today or reach out for a confidential chat. Kingdom People are acting as an Employment Agency in relation to this vacancy. JBRP1_UKTJ
Dec 10, 2025
Full time
Are you an experienced Principal Mechanical Engineer who enjoys solving complex technical problems, improving asset reliability and ensuring engineering systems are safe and compliant? If youre looking for a role with real impact across one of the UKs most unique and high-profile infrastructure environments, this could be the perfect opportunity. Were supporting a major organisation responsible for engineering governance, assurance and asset management across a large, highly regulated maritime estate in Portsmouth. Youll join a specialist team of senior engineers who support mission-critical mechanical and saltwater systems, working in an environment where no two days are the same. Whats the role all about? As a Principal Mechanical Engineer, youll be a key part of the Engineering, Assurance & Compliance team, providing technical leadership across mechanical systems, rotating machinery, hydraulic systems and saltwater infrastructure. Youll take ownership of complex engineering challenges, drive safe-to-operate assurance, and make sure assets are managed, maintained and developed in line with statutory and regulatory requirements. In this role, you will: Provide engineering governance and assurance for mechanical and saltwater systems Own technical issues, produce safety management systems and unblock engineering problems Review asset condition and present findings to asset owners Support the development and implementation of maintenance strategies (including Condition & Risk-Based Maintenance) Contribute to updates of Asset Management Plans and long-term improvement strategies Collaborate with engineering teams to drive solutions and continuous improvement Support efforts aligned with Net Zero Carbon engineering strategies This is a senior-level engineering role where your decisions genuinely influence safety, reliability and strategic infrastructure planning. What youll bring To succeed as a Principal Mechanical Engineer, youll need: Degree in Mechanical Engineering (or equivalent) Chartered status or working toward chartership (CEng preferred) Significant experience in mechanical engineering within a regulated or infrastructure environment Strong technical understanding of saltwater systems, hydraulic systems, rotating machinery Experience creating and implementing maintenance strategies Ability to balance systems-level thinking with component-level detail Knowledge of compliance requirements for mechanical systems within built or maritime estates Excellent communication, presentation and stakeholder-management skills Who you are Youre a confident and influential engineer who enjoys taking ownership, solving problems and supporting others. You think strategically, can explain complex engineering concepts clearly, and work well with both senior stakeholders and technical teams. Youll be: Organised and proactive Engaging and collaborative Skilled at communicating technical information Driven by quality, safety and continuous improvement Whats in it for you? £60,000£68,000 salary 25 days holiday + bank holidays Enhanced pension scheme Life assurance Group income protection Internal benefits & discounts programme Cycle to Work scheme Professional development & career progression Wellbeing & occupational health services Reward & recognition initiatives Ready to take the next step? If youre an experienced Principal Mechanical Engineer looking for a role where your expertise truly makes an impact, wed love to hear from you. Apply today or reach out for a confidential chat. Kingdom People are acting as an Employment Agency in relation to this vacancy. JBRP1_UKTJ
AA Euro Group are currently seeking an experienced Mechanical Technician on behalf of a main contractor delivering a new Energy from Waste (EfW) facility in Slough. Working with the O&M (Operation and Maintenance) team, the Mechanical Engineering team, perform skilled mechanical work in support of the overall facility s operation and in maintaining operation of the facility in compliance with established production schedules and plant output requirements. You will; Perform a wide variety of mechanical repairs on all plant process systems and equipment, plans details of assigned jobs Inspects and lubricates all plant equipment routinely and makes necessary adjustments to ensure that equipment is operating efficiently Conduct Risk identification/analysis/assessments Gives work direction and instruction to other team members Attend HSE Inspections, audits, assessments, and meetings, reports promptly any HSE infringements Qualifications Recognised engineering apprenticeship, HNC/D qualification in engineering desirable Responsibilities in maintenance or engineering role in a 24/7 heavy process environment involving gearboxes, conveyors, steam raising plant, valves, rotating plant and hydraulic systems IOSH Managing Safely Team leader skills, fault diagnosis and problem solving, good at planning and management, safety focus Excellent communication (read, write and verbal) skills in English Language Additional information Competitive salary + Call Out Allowance Attractive company benefits including; Pension up to 10% employer contribution Life Assurance 4 x salary Private Medical Private Dental
Dec 10, 2025
Full time
AA Euro Group are currently seeking an experienced Mechanical Technician on behalf of a main contractor delivering a new Energy from Waste (EfW) facility in Slough. Working with the O&M (Operation and Maintenance) team, the Mechanical Engineering team, perform skilled mechanical work in support of the overall facility s operation and in maintaining operation of the facility in compliance with established production schedules and plant output requirements. You will; Perform a wide variety of mechanical repairs on all plant process systems and equipment, plans details of assigned jobs Inspects and lubricates all plant equipment routinely and makes necessary adjustments to ensure that equipment is operating efficiently Conduct Risk identification/analysis/assessments Gives work direction and instruction to other team members Attend HSE Inspections, audits, assessments, and meetings, reports promptly any HSE infringements Qualifications Recognised engineering apprenticeship, HNC/D qualification in engineering desirable Responsibilities in maintenance or engineering role in a 24/7 heavy process environment involving gearboxes, conveyors, steam raising plant, valves, rotating plant and hydraulic systems IOSH Managing Safely Team leader skills, fault diagnosis and problem solving, good at planning and management, safety focus Excellent communication (read, write and verbal) skills in English Language Additional information Competitive salary + Call Out Allowance Attractive company benefits including; Pension up to 10% employer contribution Life Assurance 4 x salary Private Medical Private Dental
Maintenance Engineers (Electrical) - Penrith, UK We are pleased to announce due to internal promotions within our organisation, and as part of our growth and exciting business transformation, we are looking for Maintenance Engineers with experience in electrical engineering to join our onsite team in Penrith, UK. Here at JELD-WEN UK, a global organisation that produces and manufactures Doors and Doorsets, Penrith is the European flagship for our UK production. With the addition of a new manufacturing line and a broader transformation agenda across the business, this is an exciting time to join us. This role will be focused on ensuring that planned and reactive work is completed in line with the site priorities, you will assist in the development of the departments Risk Assessment's, Safe Systems of Work and Planned Maintenance Routines, along with all thing's continuous improvement related. You will be part of a multi-disciplined team of Engineers covering a 24hr operation, providing support to the site teams to ensure compliance with company legislative requirements, educating, developing, and inspiring team members towards betterment and achievement. You will drive Engineering activities towards world-class performance; make continuous improvement standard practice. You will be safety and quality conscious and a good communicator, communicating openly, promptly, and professionally to internal and external stakeholders. We offer onsite working from our Penrith site, on a 2 week rotating shift pattern (7 days out of 14 worked, to include 12hr shifts), a competitive salary, 25 days holiday with the opportunity to purchase up to 5 days, 7.5% pension, Medicash Health Cash plan salary sacrifice scheme and opportunities to grow and develop your career. What your impact will be: Drive departments 5s campaigns and demonstrate 5s expansion as part of daily cadence. Receive and issue permits to work and ensure engineering work is carried out to H&S, environmental and engineering standards. Ensure Maintenance systems are fully utilised to optimise performance. Support with the training and coaching with the apprentices. Implementation of Risk Assessments and support of HAZARD assessments. Work to daily Standard Operating Procedures. Support Plant Managers and Leadership team to develop and deliver an engineering continuous improvement culture. You will contribute to safety audits and SIO generation (Safety Improvement Opportunities), creating a culture of 'safety first.' Ensure full compliance of Health and Safety procedures including SOP adherence, PPE and Workwear and incident investigations. You will report any safety issues promptly, reinforce policies to others where needed and reminding them of their right to stop work and the Jeld Wen lifesaving rules. Sustain good housekeeping standards and ensure compliance to production schedules. Actively participate in capturing and closing out 3C SQDCIP actions. Assist with shift handover and on occasion support/cover for the Shift Team Leader. What you'll need to succeed: Previous experience of working in a manufacturing/production environment. NVQ or equivalent in electrical engineering or similar discipline. A clear understanding of electrical systems with excellent fault diagnosis and ratification skills. An understanding of mechanical systems is preferred, but not essential. Good knowledge of PPM and continuous improvement systems. Previous experience of using a CMMS. Previous experience of working flexibly, conducting basic problem solving and training others. Good computer skills required and experience of basic business software. Flexible attitude towards shifts, able to work a 2 week rotating shift pattern (7 days out of 14 worked, to include 12hr shifts). "We are passionate about doors and are one of the world's largest manufacturers in this field. If you want to join us, we provide an international environment, a high level of flexibility, great potential for personal development and the opportunity to work with strong brands". About JELD-WEN Holding, Inc. JELD-WEN Holding, Inc. (NYSE: JELD) is a leading global designer, manufacturer and distributor of high-performance interior and exterior doors, windows, and related building products serving the new construction and repair and remodeling sectors. Based in Charlotte, North Carolina, the company operates across North America and Europe. Our associates are dedicated to bringing beauty and security to the spaces that touch our lives through our market-leading product brands across the world. The JELD-WEN family of brands includes JELD-WEN worldwide, LaCantina and VPI in North America, and Swedoor and DANA in Europe. For more information, visit or follow LinkedIn . JELD-WEN has been named by Forbes as one of 'America's Best Employers' and by Newsweek as one of the 'World's Most Trustworthy Companies'. What We Offer Investing in People is one of our Core Values, we strive to attract & retain great people! As such, JELD-WEN offers competitive compensation & benefits packages. JELD-WEN is an equal employment opportunity employer and does not tolerate discrimination, harassment, and/or retaliation based on individuals' physical traits, beliefs, and/or other characteristics that are protected under applicable laws. JELD-WEN does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services.
Dec 10, 2025
Full time
Maintenance Engineers (Electrical) - Penrith, UK We are pleased to announce due to internal promotions within our organisation, and as part of our growth and exciting business transformation, we are looking for Maintenance Engineers with experience in electrical engineering to join our onsite team in Penrith, UK. Here at JELD-WEN UK, a global organisation that produces and manufactures Doors and Doorsets, Penrith is the European flagship for our UK production. With the addition of a new manufacturing line and a broader transformation agenda across the business, this is an exciting time to join us. This role will be focused on ensuring that planned and reactive work is completed in line with the site priorities, you will assist in the development of the departments Risk Assessment's, Safe Systems of Work and Planned Maintenance Routines, along with all thing's continuous improvement related. You will be part of a multi-disciplined team of Engineers covering a 24hr operation, providing support to the site teams to ensure compliance with company legislative requirements, educating, developing, and inspiring team members towards betterment and achievement. You will drive Engineering activities towards world-class performance; make continuous improvement standard practice. You will be safety and quality conscious and a good communicator, communicating openly, promptly, and professionally to internal and external stakeholders. We offer onsite working from our Penrith site, on a 2 week rotating shift pattern (7 days out of 14 worked, to include 12hr shifts), a competitive salary, 25 days holiday with the opportunity to purchase up to 5 days, 7.5% pension, Medicash Health Cash plan salary sacrifice scheme and opportunities to grow and develop your career. What your impact will be: Drive departments 5s campaigns and demonstrate 5s expansion as part of daily cadence. Receive and issue permits to work and ensure engineering work is carried out to H&S, environmental and engineering standards. Ensure Maintenance systems are fully utilised to optimise performance. Support with the training and coaching with the apprentices. Implementation of Risk Assessments and support of HAZARD assessments. Work to daily Standard Operating Procedures. Support Plant Managers and Leadership team to develop and deliver an engineering continuous improvement culture. You will contribute to safety audits and SIO generation (Safety Improvement Opportunities), creating a culture of 'safety first.' Ensure full compliance of Health and Safety procedures including SOP adherence, PPE and Workwear and incident investigations. You will report any safety issues promptly, reinforce policies to others where needed and reminding them of their right to stop work and the Jeld Wen lifesaving rules. Sustain good housekeeping standards and ensure compliance to production schedules. Actively participate in capturing and closing out 3C SQDCIP actions. Assist with shift handover and on occasion support/cover for the Shift Team Leader. What you'll need to succeed: Previous experience of working in a manufacturing/production environment. NVQ or equivalent in electrical engineering or similar discipline. A clear understanding of electrical systems with excellent fault diagnosis and ratification skills. An understanding of mechanical systems is preferred, but not essential. Good knowledge of PPM and continuous improvement systems. Previous experience of using a CMMS. Previous experience of working flexibly, conducting basic problem solving and training others. Good computer skills required and experience of basic business software. Flexible attitude towards shifts, able to work a 2 week rotating shift pattern (7 days out of 14 worked, to include 12hr shifts). "We are passionate about doors and are one of the world's largest manufacturers in this field. If you want to join us, we provide an international environment, a high level of flexibility, great potential for personal development and the opportunity to work with strong brands". About JELD-WEN Holding, Inc. JELD-WEN Holding, Inc. (NYSE: JELD) is a leading global designer, manufacturer and distributor of high-performance interior and exterior doors, windows, and related building products serving the new construction and repair and remodeling sectors. Based in Charlotte, North Carolina, the company operates across North America and Europe. Our associates are dedicated to bringing beauty and security to the spaces that touch our lives through our market-leading product brands across the world. The JELD-WEN family of brands includes JELD-WEN worldwide, LaCantina and VPI in North America, and Swedoor and DANA in Europe. For more information, visit or follow LinkedIn . JELD-WEN has been named by Forbes as one of 'America's Best Employers' and by Newsweek as one of the 'World's Most Trustworthy Companies'. What We Offer Investing in People is one of our Core Values, we strive to attract & retain great people! As such, JELD-WEN offers competitive compensation & benefits packages. JELD-WEN is an equal employment opportunity employer and does not tolerate discrimination, harassment, and/or retaliation based on individuals' physical traits, beliefs, and/or other characteristics that are protected under applicable laws. JELD-WEN does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services.
Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY24, our shared passion helped us achieve revenues of 1.8bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Our Selby site is home to over 750 colleagues and a proud heritage. As the UK's number one manufacturer of private-label cooking sauces and pickles, we've been serving customers since 1914. Today, we produce more than 160 million units a year across 600 product lines for major retailers including Morrisons, Tesco and Asda. We're looking for an experienced HR Business Partner to join us on a fixed-term contract, covering maternity leave from January 2026 for around 10.5months. Because this role is rooted in our people and our day-to-day operations, you'll work full-time from our Selby site (YO8 5BJ). What You'll Be Doing Are you an experienced multiskilled maintenance engineer from an FMCG/Food background looking for a new challenge? As one of our highly skilled maintenance engineers you will be responsible for: Carrying out fault finding, problem solving and planned and preventative maintenance on plant equipment to maximise equipment reliability and performance Responding to internal customer needs to maximise production time according to given priorities Complying with food safety standards and controls to ensure all work is carried out correctly and safely Completing all necessary documentation ensuring that it is kept accurate and is audit ready Identify and recommend opportunities for improvements to promote Health & Safety and/or operational efficiency and effectiveness Maintenance on a range of manufacturing/production/packaging machinery Shift Pattern: 4 on 4 off rotating days and nights What We're Looking For We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. As one of our maintenance engineers you will: People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification Have experience working as a Maintenance Engineer within manufacturing/FMCG Utilise a proactive approach, with a willingness to learn and develop Have experience in electrical and mechanical fault finding If this sounds like you join us, grow with Greencore and be a part of driving our future success. What You'll Get in Return Competitive salary and job-related benefits Holidays Pension up to 8% matched Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Dec 09, 2025
Full time
Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY24, our shared passion helped us achieve revenues of 1.8bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Our Selby site is home to over 750 colleagues and a proud heritage. As the UK's number one manufacturer of private-label cooking sauces and pickles, we've been serving customers since 1914. Today, we produce more than 160 million units a year across 600 product lines for major retailers including Morrisons, Tesco and Asda. We're looking for an experienced HR Business Partner to join us on a fixed-term contract, covering maternity leave from January 2026 for around 10.5months. Because this role is rooted in our people and our day-to-day operations, you'll work full-time from our Selby site (YO8 5BJ). What You'll Be Doing Are you an experienced multiskilled maintenance engineer from an FMCG/Food background looking for a new challenge? As one of our highly skilled maintenance engineers you will be responsible for: Carrying out fault finding, problem solving and planned and preventative maintenance on plant equipment to maximise equipment reliability and performance Responding to internal customer needs to maximise production time according to given priorities Complying with food safety standards and controls to ensure all work is carried out correctly and safely Completing all necessary documentation ensuring that it is kept accurate and is audit ready Identify and recommend opportunities for improvements to promote Health & Safety and/or operational efficiency and effectiveness Maintenance on a range of manufacturing/production/packaging machinery Shift Pattern: 4 on 4 off rotating days and nights What We're Looking For We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. As one of our maintenance engineers you will: People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification Have experience working as a Maintenance Engineer within manufacturing/FMCG Utilise a proactive approach, with a willingness to learn and develop Have experience in electrical and mechanical fault finding If this sounds like you join us, grow with Greencore and be a part of driving our future success. What You'll Get in Return Competitive salary and job-related benefits Holidays Pension up to 8% matched Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
