My client, a market leading Consultancy who specialise in building services, electrical engineering and sustainability, is searching for a Graduate Electrical Engineer to join their MEP Design team. This is a fully remote opportunity with projects based across the South of England. You will be required to visit sites and liaise with Clients across the region. Candidates are required have a BSc and/or MSc in Electrical Engineering and a keen interest in electrical and building services designs for residential, commercial and industrial developments. It is beneficial for applicants to have experience using Dialux and AutoCAD for detailed electrical designs. A driving license will be required to attend site visits. As a Graduate Electrical Engineer, you will join a supportive team based across the South East. You will join an experienced MEP design team who specialise in mechanical, electrical and public health design for residential, commercial and mixed use development projects. Although you will work remotely, you will be trained by the team to specialise in electrical, lighting and cabling designs for residential, commercial and leisure developments using Amtech, Dialux and AutoCAD. You will also be supported to complete; -Design calculations for major building projects. -Assist with site investigations reporting back to design team. -Frequently attend meetings with internal and external design teams, clients, architects and contractors to discuss design concepts. -Deliver projects to time and budget. Full training and support will be provided by the experienced team remotely. This role offers a competitive salary, flexible working, training, social events and career development. If this role is of interest to you, please contact Jordanna Morris at Aztrum Recruitment.
Dec 07, 2025
Full time
My client, a market leading Consultancy who specialise in building services, electrical engineering and sustainability, is searching for a Graduate Electrical Engineer to join their MEP Design team. This is a fully remote opportunity with projects based across the South of England. You will be required to visit sites and liaise with Clients across the region. Candidates are required have a BSc and/or MSc in Electrical Engineering and a keen interest in electrical and building services designs for residential, commercial and industrial developments. It is beneficial for applicants to have experience using Dialux and AutoCAD for detailed electrical designs. A driving license will be required to attend site visits. As a Graduate Electrical Engineer, you will join a supportive team based across the South East. You will join an experienced MEP design team who specialise in mechanical, electrical and public health design for residential, commercial and mixed use development projects. Although you will work remotely, you will be trained by the team to specialise in electrical, lighting and cabling designs for residential, commercial and leisure developments using Amtech, Dialux and AutoCAD. You will also be supported to complete; -Design calculations for major building projects. -Assist with site investigations reporting back to design team. -Frequently attend meetings with internal and external design teams, clients, architects and contractors to discuss design concepts. -Deliver projects to time and budget. Full training and support will be provided by the experienced team remotely. This role offers a competitive salary, flexible working, training, social events and career development. If this role is of interest to you, please contact Jordanna Morris at Aztrum Recruitment.
We are currently in the market to recruit a Senior Electrical and ICA Design Engineer to join our dynamic and growing Water Consultancy team operating across the UK. You'll work on exciting AMP8 and AMP9 projects, ensuring exceptional water services in a collaborative environment. RPS, Tetra Tech are actively engaged in several long-term wastewater programmes across the UK water industry, helping our clients address major pollution and flooding challenges. As part of these programmes our wastewater consulting team undertake a broad range of projects including urban drainage and water quality modelling studies; WINEP, SOAF, DWMPs and catchment investment planning; and the development of engineering solutions from feasibility through to outline and detailed design. About The Team: As part of Tetra Tech. RPS Water Consulting is a team of engineers, designers, modellers, and data analysts providing asset management and operational strategy development, to our water industry clients to support business planning and delivery. This is an evolving industry, providing challenges and opportunities that require innovation, dedication and teamwork to help us meet our clients' needs. About You: You will be experienced in liaising with the client to understand fully their needs, interpret their data, and develop a project plan. You will be able to coordinate multidisciplinary teams to ensure that the project as a whole meets its goals. You will be experienced in producing technical outputs such as technical specifications, schedules, reports, load and instrument lists, cable sizing calculations, single line diagrams and system architecture layouts, and be familiar with collaborative planning reviews and designs of solutions. You will be able to provide engineering inputs and design outputs in collaboration with other disciplines, producing general arrangement drawings, 3D models, 2D plans and sections, and piping & instrumentation diagrams. To be successful in this role, you will have strong communication skills and be able to deliver technical presentations to clients and other design engineers as well as inputting into collaborative design discussions including technical workshops and safety reviews, including HAZOPs and ALMs. You will understand how water and wastewater treatment processes operate and be experienced in assessing existing site infrastructure to develop and deliver the electrical and ICA design. By joining us, you're not just taking on exciting projects and collaborating with leading minds. You're making a meaningful impact on millions of lives the UK, leaving a legacy for generations to come. As a valued member of our team, you'll play a crucial role in the water industry, and work with the largest water companies in the UK, ensuring a positive and enduring influence on the communities we serve. If you're ready to contribute your skills and expertise to a dynamic and innovative environment, we invite you to join us on this exciting journey. Your responsibilities: Balance your workload across a wide variety of projects from a range of major long-term frameworks with water companies and contractors across the UK. Seek to achieve positive outcomes for projects and the community. Work closely with other senior and principal engineers and other stakeholders supporting project delivery. Help to develop the wider team by acting as a mentor and guide to less experienced members, checking their work and providing technical governance and oversight. Interpret and understand technical drawings and supervise their production, ideally through AutoCAD and/or Inventor experience. Undertake asset condition surveys and prepare reports and recommendations. Contribute to the production of process and instrumentation diagrams (P&IDs). Prepare electrical and ICA design deliverables including calculations, reports, specifications, datasheets, drawings, schedules, and procurement documentation. Provide support to allow the project team to comply with the duties of Designer under CDM, including through the production of design risk assessments. Ensure quality assurance systems and procedures are followed, and that high standards are maintained. Act as a project manager, package manager or design team leader as required. Skills, knowledge, and experience: A good technical understanding of electrical engineering and ICA principles. Significant water industry experience. Proficient in: Load assessment and LV and MV distribution systems design The use of P&IDs to create equipment schedules ICA and SCADA system architecture development Production of URSs, FDSs and control philosophies The production of specifications, reports and technical documentation. Complying with the Construction, Design & Management (CDM) Regulations and designing for safety. Various methods of contract procurement and engagement, ideally including the NEC forms of contract Managing your work to time, cost, and quality criteria. Supporting junior staff in their technical and personal development. The ability to travel and visit operational and construction sites as required, to act in a safe manner, and to survey, inspect, and witness test mechanical equipment and installations. Knowledge of design tools and software such as AutoCAD or similar design packages would be an advantage but is not essential. Qualifications: A degree-level qualification in electrical engineering or a closely-allied subject, ideally IET- accredited. Postgraduate qualifications are an advantage. Chartered engineer or working towards and nearing chartership. JBRP1_UKTJ
Dec 07, 2025
Full time
We are currently in the market to recruit a Senior Electrical and ICA Design Engineer to join our dynamic and growing Water Consultancy team operating across the UK. You'll work on exciting AMP8 and AMP9 projects, ensuring exceptional water services in a collaborative environment. RPS, Tetra Tech are actively engaged in several long-term wastewater programmes across the UK water industry, helping our clients address major pollution and flooding challenges. As part of these programmes our wastewater consulting team undertake a broad range of projects including urban drainage and water quality modelling studies; WINEP, SOAF, DWMPs and catchment investment planning; and the development of engineering solutions from feasibility through to outline and detailed design. About The Team: As part of Tetra Tech. RPS Water Consulting is a team of engineers, designers, modellers, and data analysts providing asset management and operational strategy development, to our water industry clients to support business planning and delivery. This is an evolving industry, providing challenges and opportunities that require innovation, dedication and teamwork to help us meet our clients' needs. About You: You will be experienced in liaising with the client to understand fully their needs, interpret their data, and develop a project plan. You will be able to coordinate multidisciplinary teams to ensure that the project as a whole meets its goals. You will be experienced in producing technical outputs such as technical specifications, schedules, reports, load and instrument lists, cable sizing calculations, single line diagrams and system architecture layouts, and be familiar with collaborative planning reviews and designs of solutions. You will be able to provide engineering inputs and design outputs in collaboration with other disciplines, producing general arrangement drawings, 3D models, 2D plans and sections, and piping & instrumentation diagrams. To be successful in this role, you will have strong communication skills and be able to deliver technical presentations to clients and other design engineers as well as inputting into collaborative design discussions including technical workshops and safety reviews, including HAZOPs and ALMs. You will understand how water and wastewater treatment processes operate and be experienced in assessing existing site infrastructure to develop and deliver the electrical and ICA design. By joining us, you're not just taking on exciting projects and collaborating with leading minds. You're making a meaningful impact on millions of lives the UK, leaving a legacy for generations to come. As a valued member of our team, you'll play a crucial role in the water industry, and work with the largest water companies in the UK, ensuring a positive and enduring influence on the communities we serve. If you're ready to contribute your skills and expertise to a dynamic and innovative environment, we invite you to join us on this exciting journey. Your responsibilities: Balance your workload across a wide variety of projects from a range of major long-term frameworks with water companies and contractors across the UK. Seek to achieve positive outcomes for projects and the community. Work closely with other senior and principal engineers and other stakeholders supporting project delivery. Help to develop the wider team by acting as a mentor and guide to less experienced members, checking their work and providing technical governance and oversight. Interpret and understand technical drawings and supervise their production, ideally through AutoCAD and/or Inventor experience. Undertake asset condition surveys and prepare reports and recommendations. Contribute to the production of process and instrumentation diagrams (P&IDs). Prepare electrical and ICA design deliverables including calculations, reports, specifications, datasheets, drawings, schedules, and procurement documentation. Provide support to allow the project team to comply with the duties of Designer under CDM, including through the production of design risk assessments. Ensure quality assurance systems and procedures are followed, and that high standards are maintained. Act as a project manager, package manager or design team leader as required. Skills, knowledge, and experience: A good technical understanding of electrical engineering and ICA principles. Significant water industry experience. Proficient in: Load assessment and LV and MV distribution systems design The use of P&IDs to create equipment schedules ICA and SCADA system architecture development Production of URSs, FDSs and control philosophies The production of specifications, reports and technical documentation. Complying with the Construction, Design & Management (CDM) Regulations and designing for safety. Various methods of contract procurement and engagement, ideally including the NEC forms of contract Managing your work to time, cost, and quality criteria. Supporting junior staff in their technical and personal development. The ability to travel and visit operational and construction sites as required, to act in a safe manner, and to survey, inspect, and witness test mechanical equipment and installations. Knowledge of design tools and software such as AutoCAD or similar design packages would be an advantage but is not essential. Qualifications: A degree-level qualification in electrical engineering or a closely-allied subject, ideally IET- accredited. Postgraduate qualifications are an advantage. Chartered engineer or working towards and nearing chartership. JBRP1_UKTJ
Fortus Recruitment provides specialist recruitment services, supplying quality candidates on a temporary or permanent basis to leading organisations throughout the industry. We supply candidates from executive to operative level, and are currently working with a Housing Association who are looking for Commercial Gas Engineers in Brentwood. Duties: To maintain property services by delivering planned and reactive maintenance to an agreed programme, budget, and quality within the company's operational targets. Minimum of 5 years of Commercial Gas experience Familiarity with relevant gas safety standards and regulations. Act as the primary point of contact for all gas-related matters, ensuring adherence to industry standards and regulations. To conduct Planned Preventative Maintenance to all types of Commercial Boilers and Plant Room Equipment as per maintenance schedules. To attend reactive calls, diagnose faults, fit parts, and conduct repairs to boilers and ancillary mechanical systems, such as pumps, valves, pipework etc. Sound Knowledge, of Heating, and Hot Water system operation and control with understanding of system design. Installation experience of replacement plant and components such as: Boilers, Burners, Pumps, Pressurisation units, Valves, Pressure Switches Automatic Air Vents etc. Installation Pipework to include safe isolation of systems repairs and modification. Ability to conduct repairs within communal areas to Radiators, valves, and pipework. Identify faults and report issues in a timely manner. Consulting with Suppliers to obtain the necessary replacement component costs to include labour requirements and submitting these to the Commercial Gas team as required. To complete digital records PPM's planned works and reactive repairs for each task using Aston Group's ACIMs software. To comply with safe working practices ensuring the safety of the workforce and public is always maintained. Liaise with all stakeholders as required to ensure a high-quality service is delivered and a high level of customer satisfaction is achieved. Responsible for the delivery of planned commitments to the client, ensuring agreed KPI's and service levels are being met. To maintain a high standard of customer service for all internal and external facing activities. To attend toolbox talks. Ability to pass Enhanced DBS checks. To comply with the company's Health and Safety Policy at all times and follow all related safe systems of work. To undertake call out duties on a scheduled out of hours call out rota as required. Responsible for care and maintenance of vehicle; washes vehicle and cleans interior; takes vehicle to garage for maintenance and repair.To report any vehicle malfunctions to management as soon as possible. Qualifications Required: CCN1, CENWAT, HTR1, CKR1 DAH1 CODNCO1 CORT1 CIGA1 ICPN1 TPCP1A TPCP1 (desirable) BMP1 (desirable) IPAF/PASMA qualifications. (desirable) Salary & Benefits: Competitive Company van and fuel card 24 days holiday per year Pension with 4% salary sacrifice scheme employer contribution Death in Service benefit of 4 x salary Employee Assistance Programme Health Cash Plan Enhanced Family Friendly Policies Long Service Awards Additional holiday days based on length of service Ride to Work scheme If you or anyone you know are interested in the role, please apply or contact the office and ask for george. INDGG JBRP1_UKTJ
Dec 07, 2025
Full time
Fortus Recruitment provides specialist recruitment services, supplying quality candidates on a temporary or permanent basis to leading organisations throughout the industry. We supply candidates from executive to operative level, and are currently working with a Housing Association who are looking for Commercial Gas Engineers in Brentwood. Duties: To maintain property services by delivering planned and reactive maintenance to an agreed programme, budget, and quality within the company's operational targets. Minimum of 5 years of Commercial Gas experience Familiarity with relevant gas safety standards and regulations. Act as the primary point of contact for all gas-related matters, ensuring adherence to industry standards and regulations. To conduct Planned Preventative Maintenance to all types of Commercial Boilers and Plant Room Equipment as per maintenance schedules. To attend reactive calls, diagnose faults, fit parts, and conduct repairs to boilers and ancillary mechanical systems, such as pumps, valves, pipework etc. Sound Knowledge, of Heating, and Hot Water system operation and control with understanding of system design. Installation experience of replacement plant and components such as: Boilers, Burners, Pumps, Pressurisation units, Valves, Pressure Switches Automatic Air Vents etc. Installation Pipework to include safe isolation of systems repairs and modification. Ability to conduct repairs within communal areas to Radiators, valves, and pipework. Identify faults and report issues in a timely manner. Consulting with Suppliers to obtain the necessary replacement component costs to include labour requirements and submitting these to the Commercial Gas team as required. To complete digital records PPM's planned works and reactive repairs for each task using Aston Group's ACIMs software. To comply with safe working practices ensuring the safety of the workforce and public is always maintained. Liaise with all stakeholders as required to ensure a high-quality service is delivered and a high level of customer satisfaction is achieved. Responsible for the delivery of planned commitments to the client, ensuring agreed KPI's and service levels are being met. To maintain a high standard of customer service for all internal and external facing activities. To attend toolbox talks. Ability to pass Enhanced DBS checks. To comply with the company's Health and Safety Policy at all times and follow all related safe systems of work. To undertake call out duties on a scheduled out of hours call out rota as required. Responsible for care and maintenance of vehicle; washes vehicle and cleans interior; takes vehicle to garage for maintenance and repair.To report any vehicle malfunctions to management as soon as possible. Qualifications Required: CCN1, CENWAT, HTR1, CKR1 DAH1 CODNCO1 CORT1 CIGA1 ICPN1 TPCP1A TPCP1 (desirable) BMP1 (desirable) IPAF/PASMA qualifications. (desirable) Salary & Benefits: Competitive Company van and fuel card 24 days holiday per year Pension with 4% salary sacrifice scheme employer contribution Death in Service benefit of 4 x salary Employee Assistance Programme Health Cash Plan Enhanced Family Friendly Policies Long Service Awards Additional holiday days based on length of service Ride to Work scheme If you or anyone you know are interested in the role, please apply or contact the office and ask for george. INDGG JBRP1_UKTJ
Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Dec 07, 2025
Full time
Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
My client, a market leading MEP and Sustainability Consultancy based across the Midlands and London is searching for a Senior Revit Technician to join their specialist team in Central London. This is a hybrid role, offering varied residential, commercial and industrial projects. As Senior Revit Technician you will join a bespoke team based in London. You will be expected to check and amend designs and mentor junior team members. As a Senior Technician you will be expected to complete electrical and mechanical designs for major residential, commercial, healthcare, leisure and retail schemes using Revit. Using your design expertise, you will be required to complete detailed mechanical, electrical and building services designs using Revit. You will also be required to complete; - 3D design of Mechanical, Electrical and Public services. -Design to BIM level 2 in accordance with British Standards PAS 1192-5. -Create to scale surveys of existing buildings. -Create feasibility and condition reports for future works and liaise with Trades, Engineers, Architects and Surveyors for on-going projects. -Run clash detection on designs before process to Architects and field engineers. This role offers a competitive salary, private medical care, travel expenses for business meetings, pension scheme, flexible working (hybrid) and generous annual leave. As a Senior Revit Technician you are required to have a HNC/HND/BSc or MSc Mechanical Engineering or Building Services Engineering and have experience working for UK based Consultancy as a Revit Technician completing detailed electrical, mechanical and building services designs for buildings and commercial developments using Revit. You are also required to have a detailed knowledge PAS 1192-5 and other relevant codes. Candidates are required to live within commutable distance of the office and have a valid UK driving licence to visit sites. If this role is of interest to you, please contact Jordanna Morris at Aztrum Recruitment.
Dec 07, 2025
Full time
My client, a market leading MEP and Sustainability Consultancy based across the Midlands and London is searching for a Senior Revit Technician to join their specialist team in Central London. This is a hybrid role, offering varied residential, commercial and industrial projects. As Senior Revit Technician you will join a bespoke team based in London. You will be expected to check and amend designs and mentor junior team members. As a Senior Technician you will be expected to complete electrical and mechanical designs for major residential, commercial, healthcare, leisure and retail schemes using Revit. Using your design expertise, you will be required to complete detailed mechanical, electrical and building services designs using Revit. You will also be required to complete; - 3D design of Mechanical, Electrical and Public services. -Design to BIM level 2 in accordance with British Standards PAS 1192-5. -Create to scale surveys of existing buildings. -Create feasibility and condition reports for future works and liaise with Trades, Engineers, Architects and Surveyors for on-going projects. -Run clash detection on designs before process to Architects and field engineers. This role offers a competitive salary, private medical care, travel expenses for business meetings, pension scheme, flexible working (hybrid) and generous annual leave. As a Senior Revit Technician you are required to have a HNC/HND/BSc or MSc Mechanical Engineering or Building Services Engineering and have experience working for UK based Consultancy as a Revit Technician completing detailed electrical, mechanical and building services designs for buildings and commercial developments using Revit. You are also required to have a detailed knowledge PAS 1192-5 and other relevant codes. Candidates are required to live within commutable distance of the office and have a valid UK driving licence to visit sites. If this role is of interest to you, please contact Jordanna Morris at Aztrum Recruitment.
Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Dec 06, 2025
Full time
Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Dec 06, 2025
Full time
Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Dec 06, 2025
Full time
Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Do you have a mechanical or electrical background • Are you experienced in installation processes and skilled at problem-solving • Do you thrive in team environments and excel at stakeholder management • If so, Vestas could have the perfect opportunity for you! Region NCE > Customer Project Execution & Installations Supervisors Team 1 Our department includes teams of supervisors and technicians supporting pre-assembly, installation, commissioning, service sites, and warehouse operations, as well as external resource management and site support coordination. We also work with external technicians and consultants. We focus on developing and allocating resources with the right mindset, coordinating and growing people and teams to ensure operational success. Our culture emphasizes safety, cost awareness, and quality. In this role, you will be actively involved in offshore projects. Responsibilities The Installation Supervisor is responsible for the daily coordination and execution for the work scope on every site during Installation works Working closely with the Deputy Installation Manager and Lifting Supervisor Ensure effective working of the team, monitoring and ensuring tasks are preformed safely and according to Vestas quality standards Preparing necessary documents such as Work Instructions, Method Statements etc and appropriate handover at the end of the project The Installation Supervisor is required to work in an enthusiastic manner and always intervene if any issues occur Qualifications Mechanical or Electrical academic background Experience working in wind industry, and with electrical/hydraulic diagrams Full GWO training and experience Fluent English skills Competencies You are customer, quality and safety focused You are a collaborator who can guide, energise, motivate, and encourage your team of technicians You should have good process understanding as well as good delegation and administration skills You should be result-driven, action-oriented and possess a continuous mind-set You are flexible, adaptive and respectful in your communication with others What we offer We offer an exciting job with great opportunities for professional and personal development in an inspiring environment with the energy industry's global partner on sustainable energy solutions. We value initiative, responsibility, and the right balance between creativity and quality in all solutions. You will become part of a highly professional environment with a good technical commitment. Additional information Primary work location: This candidate can be based in either Denmark, Ireland or UK. This position requires up to 180 days travel per year. Applications are reviewed on an ongoing basis however, please note we do amend or withdraw our jobs and reserve the right to do so at any time, including prior to the advertised closing date. Please be advised to apply on or before 24/12/2025. You can apply online by clicking on the "Apply Online" button at the top or bottom of this page. Our commitment to a fair hiring At Vestas, we evaluate all candidates solely based on their professional experience, education, and relevant skills. To support a fair recruitment process, we kindly ask that you remove any photos, dates of birth or graduation, gender pronouns, marital status, or other personal information not relevant to the role before submitting your CV/resume. Your CV/resume should focus on your professional and educational background, along with the necessary contact details (email and phone number). We train our hiring teams in inclusive evaluation and regularly review process outcomes to ensure fairness. DEIB Statement At Vestas, we recognise the value of diversity, equity, and inclusion in driving innovation and success. We strongly encourage individuals from all backgrounds to apply, particularly those who may hesitate due to their identity or feel they do not meet every criterion. As our CEO states, "Expertise and talent come in many forms, and a diverse workforce enhances our ability to think differently and solve the complex challenges of our industry". Your unique perspective is what will help us powering the solution for a sustainable, green energy future. BEWARE - RECRUITMENT FRAUD It has come to our attention that there are a number of fraudulent emails from people pretending to work for Vestas. Read more via this link, About Vestas Vestas is the energy industry's global partner on sustainable energy solutions. We are specialised in designing, manufacturing, installing, and servicing wind turbines, both onshore and offshore. Across the globe, we have installed more wind power than anyone else. We consider ourselves pioneers within the industry, as we continuously aim to design new solutions and technologies to create a more sustainable future for all of us. With more than 185 GW of wind power installed worldwide and 40+ years of experience in wind energy, we have an unmatched track record demonstrating our expertise within the field. With 30,000 employees globally, we are a diverse team united by a common goal: to power the solution - today, tomorrow, and far into the future. Vestas promotes a diverse workforce which embraces all social identities and is free of any discrimination. We commit to create and sustain an environment that acknowledges and harvests different experiences, skills, and perspectives. We also aim to give everyone equal access to opportunity. To learn more about our company and life at Vestas, we invite you to visit our website at and follow us on our social media channels. We also encourage you to join our Talent Universe to receive notifications on new and relevant postings.
Dec 06, 2025
Full time
Do you have a mechanical or electrical background • Are you experienced in installation processes and skilled at problem-solving • Do you thrive in team environments and excel at stakeholder management • If so, Vestas could have the perfect opportunity for you! Region NCE > Customer Project Execution & Installations Supervisors Team 1 Our department includes teams of supervisors and technicians supporting pre-assembly, installation, commissioning, service sites, and warehouse operations, as well as external resource management and site support coordination. We also work with external technicians and consultants. We focus on developing and allocating resources with the right mindset, coordinating and growing people and teams to ensure operational success. Our culture emphasizes safety, cost awareness, and quality. In this role, you will be actively involved in offshore projects. Responsibilities The Installation Supervisor is responsible for the daily coordination and execution for the work scope on every site during Installation works Working closely with the Deputy Installation Manager and Lifting Supervisor Ensure effective working of the team, monitoring and ensuring tasks are preformed safely and according to Vestas quality standards Preparing necessary documents such as Work Instructions, Method Statements etc and appropriate handover at the end of the project The Installation Supervisor is required to work in an enthusiastic manner and always intervene if any issues occur Qualifications Mechanical or Electrical academic background Experience working in wind industry, and with electrical/hydraulic diagrams Full GWO training and experience Fluent English skills Competencies You are customer, quality and safety focused You are a collaborator who can guide, energise, motivate, and encourage your team of technicians You should have good process understanding as well as good delegation and administration skills You should be result-driven, action-oriented and possess a continuous mind-set You are flexible, adaptive and respectful in your communication with others What we offer We offer an exciting job with great opportunities for professional and personal development in an inspiring environment with the energy industry's global partner on sustainable energy solutions. We value initiative, responsibility, and the right balance between creativity and quality in all solutions. You will become part of a highly professional environment with a good technical commitment. Additional information Primary work location: This candidate can be based in either Denmark, Ireland or UK. This position requires up to 180 days travel per year. Applications are reviewed on an ongoing basis however, please note we do amend or withdraw our jobs and reserve the right to do so at any time, including prior to the advertised closing date. Please be advised to apply on or before 24/12/2025. You can apply online by clicking on the "Apply Online" button at the top or bottom of this page. Our commitment to a fair hiring At Vestas, we evaluate all candidates solely based on their professional experience, education, and relevant skills. To support a fair recruitment process, we kindly ask that you remove any photos, dates of birth or graduation, gender pronouns, marital status, or other personal information not relevant to the role before submitting your CV/resume. Your CV/resume should focus on your professional and educational background, along with the necessary contact details (email and phone number). We train our hiring teams in inclusive evaluation and regularly review process outcomes to ensure fairness. DEIB Statement At Vestas, we recognise the value of diversity, equity, and inclusion in driving innovation and success. We strongly encourage individuals from all backgrounds to apply, particularly those who may hesitate due to their identity or feel they do not meet every criterion. As our CEO states, "Expertise and talent come in many forms, and a diverse workforce enhances our ability to think differently and solve the complex challenges of our industry". Your unique perspective is what will help us powering the solution for a sustainable, green energy future. BEWARE - RECRUITMENT FRAUD It has come to our attention that there are a number of fraudulent emails from people pretending to work for Vestas. Read more via this link, About Vestas Vestas is the energy industry's global partner on sustainable energy solutions. We are specialised in designing, manufacturing, installing, and servicing wind turbines, both onshore and offshore. Across the globe, we have installed more wind power than anyone else. We consider ourselves pioneers within the industry, as we continuously aim to design new solutions and technologies to create a more sustainable future for all of us. With more than 185 GW of wind power installed worldwide and 40+ years of experience in wind energy, we have an unmatched track record demonstrating our expertise within the field. With 30,000 employees globally, we are a diverse team united by a common goal: to power the solution - today, tomorrow, and far into the future. Vestas promotes a diverse workforce which embraces all social identities and is free of any discrimination. We commit to create and sustain an environment that acknowledges and harvests different experiences, skills, and perspectives. We also aim to give everyone equal access to opportunity. To learn more about our company and life at Vestas, we invite you to visit our website at and follow us on our social media channels. We also encourage you to join our Talent Universe to receive notifications on new and relevant postings.
Role Overview The Production Engineer plays a critical role in XYZ Reality's New Product Introduction (NPI) facility, ensuring that production operations are efficient, repeatable, and continuously improved. This role sits directly beneath the Production Manager and acts as the technical backbone of the production environment-owning CAD, improving build processes, optimising tooling and fixtures, and driving documentation accuracy and system integrity across E-Max ERP and the wider production toolchain. You will work hands on with AR hardware assemblies, developing and refining production workflows, introducing engineering change, and supporting the transition from prototype/NPI builds into scalable, stable production operations. This is a highly practical, process driven role suited to someone who thrives on solving problems, improving systems, and ensuring that every build meets the highest levels of quality, repeatability, and traceability. Key Responsibilities Process Engineering & Continuous Improvement Analyse end to end build, calibration, and test processes to identify bottlenecks, inefficiencies, and quality risks. Develop improved assembly instructions, SOPs, jigs, fixtures, and tooling to enhance efficiency and repeatability. Implement engineering change (ECO) processes to ensure design updates are reflected in production documentation. Drive automation opportunities alongside the Test Technician (e.g., semi automated test rigs, reduced manual handling). Run time and motion studies to reduce overall cycle times by 5-10% annually. CAD Ownership & Technical Documentation Own all production relevant CAD data, including mechanical assemblies, exploded views, drawing updates, version control, and change notices. Translate engineering files into production ready documentation, including work instructions, assembly guides, and exploded diagrams. Maintain a centralised, organised CAD repository with clear revision control. Produce 2D/3D drawings for fixtures, tooling, and minor design modifications where required. Systems, Data Integrity & ERP Support Maintain accurate BOMs, manufacturing routings, serialisation data, and stock structures within E Max ERP. Support the Production Manager in ensuring 100% data integrity across builds. Implement improvements to ERP workflows, reducing manual admin and improving traceability. Collaborate with procurement to ensure build documentation aligns with real world parts availability. Quality Engineering & Root Cause Analysis Support inspections, failure analysis, and defect tracking across incoming goods, in process builds, and outgoing final systems. Conduct root cause investigations on build failures, field returns, and RMA units; propose corrective and preventive actions. Track quality trends and provide structured improvement recommendations to production, procurement, and design teams. Contribute to a robust Quality Management System aligned with ISO standards. Production Support & Build Execution Provide hands on support during assembly, calibration, and testing during peak periods or complex builds. Train production and contractor staff on engineering changes, updated procedures, and new tooling/fixtures. Troubleshoot mechanical/assembly issues on the production line and work closely with design engineers on fixes. Ensure all build documentation is current, clear, and accessible to technicians. Cross Functional Collaboration Work closely with: Design Engineering - to implement updates and validate build feasibility. Test Engineering - refining test flows and ensuring consistent calibration. Procurement & Logistics - ensuring BOM accuracy and component readiness. Customer Support (Freshdesk) - analysing field failures and feeding learnings back into production. Experience & Skills Required Essential 3-6 years in production engineering, mechanical engineering, or manufacturing engineering. Strong CAD proficiency (SolidWorks, Inventor, or equivalent) including assembly management and technical drawings. Experience supporting production of electro mechanical systems or precision hardware. Strong knowledge of process improvement methods (Lean, Kaizen, root cause analysis). Hands on assembly, mechanical troubleshooting, and fixture/tooling development experience. Familiarity with ERP/MRP systems, ideally E Max or similar. Excellent documentation and version control discipline. Desired Experience in AR/VR, wearables, or electronics manufacturing. Knowledge of PCB handling, ESD protocols, and low voltage hardware assembly. Experience supporting NPI builds transitioning into scaled production. Experience with test automation or calibration workflows. Key Competencies Technical Rigor: Deep attention to detail, strong engineering fundamentals. Ownership: Takes responsibility for process stability, documentation, and quality outcomes. Problem Solving: Able to quickly diagnose complex build issues and propose practical solutions. Collaboration: Works effectively across production, design, test, and supply chain. Process Mindset: Methodical, highly organised, and able to bring structure to dynamic environments. Adaptability: Thrives in a startup like environment with evolving products and requirements.
Dec 06, 2025
Full time
Role Overview The Production Engineer plays a critical role in XYZ Reality's New Product Introduction (NPI) facility, ensuring that production operations are efficient, repeatable, and continuously improved. This role sits directly beneath the Production Manager and acts as the technical backbone of the production environment-owning CAD, improving build processes, optimising tooling and fixtures, and driving documentation accuracy and system integrity across E-Max ERP and the wider production toolchain. You will work hands on with AR hardware assemblies, developing and refining production workflows, introducing engineering change, and supporting the transition from prototype/NPI builds into scalable, stable production operations. This is a highly practical, process driven role suited to someone who thrives on solving problems, improving systems, and ensuring that every build meets the highest levels of quality, repeatability, and traceability. Key Responsibilities Process Engineering & Continuous Improvement Analyse end to end build, calibration, and test processes to identify bottlenecks, inefficiencies, and quality risks. Develop improved assembly instructions, SOPs, jigs, fixtures, and tooling to enhance efficiency and repeatability. Implement engineering change (ECO) processes to ensure design updates are reflected in production documentation. Drive automation opportunities alongside the Test Technician (e.g., semi automated test rigs, reduced manual handling). Run time and motion studies to reduce overall cycle times by 5-10% annually. CAD Ownership & Technical Documentation Own all production relevant CAD data, including mechanical assemblies, exploded views, drawing updates, version control, and change notices. Translate engineering files into production ready documentation, including work instructions, assembly guides, and exploded diagrams. Maintain a centralised, organised CAD repository with clear revision control. Produce 2D/3D drawings for fixtures, tooling, and minor design modifications where required. Systems, Data Integrity & ERP Support Maintain accurate BOMs, manufacturing routings, serialisation data, and stock structures within E Max ERP. Support the Production Manager in ensuring 100% data integrity across builds. Implement improvements to ERP workflows, reducing manual admin and improving traceability. Collaborate with procurement to ensure build documentation aligns with real world parts availability. Quality Engineering & Root Cause Analysis Support inspections, failure analysis, and defect tracking across incoming goods, in process builds, and outgoing final systems. Conduct root cause investigations on build failures, field returns, and RMA units; propose corrective and preventive actions. Track quality trends and provide structured improvement recommendations to production, procurement, and design teams. Contribute to a robust Quality Management System aligned with ISO standards. Production Support & Build Execution Provide hands on support during assembly, calibration, and testing during peak periods or complex builds. Train production and contractor staff on engineering changes, updated procedures, and new tooling/fixtures. Troubleshoot mechanical/assembly issues on the production line and work closely with design engineers on fixes. Ensure all build documentation is current, clear, and accessible to technicians. Cross Functional Collaboration Work closely with: Design Engineering - to implement updates and validate build feasibility. Test Engineering - refining test flows and ensuring consistent calibration. Procurement & Logistics - ensuring BOM accuracy and component readiness. Customer Support (Freshdesk) - analysing field failures and feeding learnings back into production. Experience & Skills Required Essential 3-6 years in production engineering, mechanical engineering, or manufacturing engineering. Strong CAD proficiency (SolidWorks, Inventor, or equivalent) including assembly management and technical drawings. Experience supporting production of electro mechanical systems or precision hardware. Strong knowledge of process improvement methods (Lean, Kaizen, root cause analysis). Hands on assembly, mechanical troubleshooting, and fixture/tooling development experience. Familiarity with ERP/MRP systems, ideally E Max or similar. Excellent documentation and version control discipline. Desired Experience in AR/VR, wearables, or electronics manufacturing. Knowledge of PCB handling, ESD protocols, and low voltage hardware assembly. Experience supporting NPI builds transitioning into scaled production. Experience with test automation or calibration workflows. Key Competencies Technical Rigor: Deep attention to detail, strong engineering fundamentals. Ownership: Takes responsibility for process stability, documentation, and quality outcomes. Problem Solving: Able to quickly diagnose complex build issues and propose practical solutions. Collaboration: Works effectively across production, design, test, and supply chain. Process Mindset: Methodical, highly organised, and able to bring structure to dynamic environments. Adaptability: Thrives in a startup like environment with evolving products and requirements.
Job Title: Principal Mechanical Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55k What you'll be doing: Design of multiple platform systems, sub-systems and equipment for the next generation Royal Navy submarines Undertake functional design activities, modelling and analysis Produce design documentation, Verification & Validation evidence and safety justifications Support specification qualification and procurement of components, working collaboratively with suppliers Engaging with stakeholders across the cross-functional project team Driving engineering governance through peer reviews and design reviews Your skills and experiences: Essential: Proven capability in system lifecycle delivery - from concept through to commissioning Demonstrated leadership - either through technical direction, mentoring, or project ownership Degree Level Qualification or Chartered engineer or working towards professional accreditation. Mechanical Engineering background in Rotator Machinery, Components or Fluid Dynamics. Desirable: Knowledge of platform-level constraints such as noise, shock, or survivability Previous experience integrating purification systems with submarine life-support, HVAC, and emergency protocols Experience in the design of gas scrubbing, filtration, and environmental control systems (e.g. CO removal, O generation, trace contaminant management , radiological hazards) - ideally in complex , safety-critical environments (e.g. maritime, aerospace, defence, nuclear, oil & gas and sub-sea) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering team: As a Lead Mechanical Engineer - Air Purification Systems, you will play a pivotal role in the design and development of submarine Air Purification and Atmosphere Monitoring systems. This includes system-level design, technical leadership , supplier engagement, and the opportunity to steer design architecture across a major submarine programme. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 2nd January 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Dec 06, 2025
Full time
Job Title: Principal Mechanical Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Circa £55k What you'll be doing: Design of multiple platform systems, sub-systems and equipment for the next generation Royal Navy submarines Undertake functional design activities, modelling and analysis Produce design documentation, Verification & Validation evidence and safety justifications Support specification qualification and procurement of components, working collaboratively with suppliers Engaging with stakeholders across the cross-functional project team Driving engineering governance through peer reviews and design reviews Your skills and experiences: Essential: Proven capability in system lifecycle delivery - from concept through to commissioning Demonstrated leadership - either through technical direction, mentoring, or project ownership Degree Level Qualification or Chartered engineer or working towards professional accreditation. Mechanical Engineering background in Rotator Machinery, Components or Fluid Dynamics. Desirable: Knowledge of platform-level constraints such as noise, shock, or survivability Previous experience integrating purification systems with submarine life-support, HVAC, and emergency protocols Experience in the design of gas scrubbing, filtration, and environmental control systems (e.g. CO removal, O generation, trace contaminant management , radiological hazards) - ideally in complex , safety-critical environments (e.g. maritime, aerospace, defence, nuclear, oil & gas and sub-sea) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering team: As a Lead Mechanical Engineer - Air Purification Systems, you will play a pivotal role in the design and development of submarine Air Purification and Atmosphere Monitoring systems. This includes system-level design, technical leadership , supplier engagement, and the opportunity to steer design architecture across a major submarine programme. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 2nd January 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Date Posted: 2025-11-26 Country: United Kingdom Location: Atlantic Inertial Systems Limited, Clittaford Road, Southway, Plymouth, Devon, PL6 6DE Position Role Type: Unspecified At Collins Aerospace, precision and reliability guide everything we do. Our Plymouth site is a recognised centre of excellence for navigation and control systems, developing world-class innovations such as MEMS-based IMUs and TERPROM terrain navigation systems. We are seeking a Senior Electronics Engineer, with knowledge of analogue and digital systems, fault diagnostics, and production operations support, ideally gained in an aerospace or defence environment. This role sits within a multi-disciplinary engineering team dedicated to safeguarding the technical integrity and performance of our production output. You'll play a key part in ensuring every product leaving the site meets the highest standards of reliability and compliance. What You Will Do: You will conduct root cause investigations into production issues and customer returns, identify and implement corrective actions, and work closely with design teams to ensure lessons learned are built into future generations of our products. You'll contribute to change control and technical reviews, providing trusted technical input on product design, performance, and test system integration. You will play a key role in maintaining product quality, reliability, and continuous improvement across our production lines. You'll provide specialist engineering expertise, drive fault diagnosis and root cause analysis, and ensure lessons learned are embedded into future designs. This role combines hands on technical problem solving with cross functional collaboration, supporting production, design, and supply chain teams to deliver world-class aerospace systems. You'll play a key role in maintaining the technical integrity of production output including: Validating technical compliance of all production output. Provide technical support to Production Engineering, to investigate and resolve product failures at all stages of assembly and test. Provide technical support to Industrial Engineering with regards to test equipment upgrades and new product and process introduction. Provide technical support to Supplier Management teams to assess and approve Supply Chain deviations & concessions. Carrying out failure investigations and identifying corrective actions, which may include leading multi-disciplinary investigation teams using 8D or similar methodologies. Manage investigation and test of customer returns, including documentation and programme / customer liaison. Technical review and approval of production and design concessions, deviations, calibration failures, production failures and other non-conformances. Maintenance of relationships with Engineering design teams to ensure production and customer knowledge is fed back and implemented into the design process. What You Must Have: Demonstrated experience with analogue and digital electronic systems, ideally within aerospace or defence environments. Appreciation of mechanical design and production principles for military or high-reliability electronics systems. Understanding of industry standard problem-solving approaches. Experience operating as a technical lead or approver, and working towards Technical / Design Authority recognition Experienced & respected within their current business and able to influence at all levels. Skills & Experience We Value: Experience of working with systems incorporating analogue sensing elements. Knowledge of principles of design, operation, production and test of inertial measurement systems. What We Offer: Competitive salary and comprehensive benefits package. Excellent 2:1 matched pension contribution (up to 10%). Private health insurance and life assurance. 25 days annual leave plus the ability to buy or sell up to 5 more. Early finish on Fridays. Career development, mentoring, and world-class training opportunities. Join Us! If you're passionate about maintaining the highest standards of engineering quality and supporting the delivery of cutting-edge aerospace systems, we'd love to hear from you. Note: The successful candidate must hold an active or be willing and eligible to obtain SC level security clearance. Please note that access to certain projects may be restricted based on nationality. RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Dec 06, 2025
Full time
Date Posted: 2025-11-26 Country: United Kingdom Location: Atlantic Inertial Systems Limited, Clittaford Road, Southway, Plymouth, Devon, PL6 6DE Position Role Type: Unspecified At Collins Aerospace, precision and reliability guide everything we do. Our Plymouth site is a recognised centre of excellence for navigation and control systems, developing world-class innovations such as MEMS-based IMUs and TERPROM terrain navigation systems. We are seeking a Senior Electronics Engineer, with knowledge of analogue and digital systems, fault diagnostics, and production operations support, ideally gained in an aerospace or defence environment. This role sits within a multi-disciplinary engineering team dedicated to safeguarding the technical integrity and performance of our production output. You'll play a key part in ensuring every product leaving the site meets the highest standards of reliability and compliance. What You Will Do: You will conduct root cause investigations into production issues and customer returns, identify and implement corrective actions, and work closely with design teams to ensure lessons learned are built into future generations of our products. You'll contribute to change control and technical reviews, providing trusted technical input on product design, performance, and test system integration. You will play a key role in maintaining product quality, reliability, and continuous improvement across our production lines. You'll provide specialist engineering expertise, drive fault diagnosis and root cause analysis, and ensure lessons learned are embedded into future designs. This role combines hands on technical problem solving with cross functional collaboration, supporting production, design, and supply chain teams to deliver world-class aerospace systems. You'll play a key role in maintaining the technical integrity of production output including: Validating technical compliance of all production output. Provide technical support to Production Engineering, to investigate and resolve product failures at all stages of assembly and test. Provide technical support to Industrial Engineering with regards to test equipment upgrades and new product and process introduction. Provide technical support to Supplier Management teams to assess and approve Supply Chain deviations & concessions. Carrying out failure investigations and identifying corrective actions, which may include leading multi-disciplinary investigation teams using 8D or similar methodologies. Manage investigation and test of customer returns, including documentation and programme / customer liaison. Technical review and approval of production and design concessions, deviations, calibration failures, production failures and other non-conformances. Maintenance of relationships with Engineering design teams to ensure production and customer knowledge is fed back and implemented into the design process. What You Must Have: Demonstrated experience with analogue and digital electronic systems, ideally within aerospace or defence environments. Appreciation of mechanical design and production principles for military or high-reliability electronics systems. Understanding of industry standard problem-solving approaches. Experience operating as a technical lead or approver, and working towards Technical / Design Authority recognition Experienced & respected within their current business and able to influence at all levels. Skills & Experience We Value: Experience of working with systems incorporating analogue sensing elements. Knowledge of principles of design, operation, production and test of inertial measurement systems. What We Offer: Competitive salary and comprehensive benefits package. Excellent 2:1 matched pension contribution (up to 10%). Private health insurance and life assurance. 25 days annual leave plus the ability to buy or sell up to 5 more. Early finish on Fridays. Career development, mentoring, and world-class training opportunities. Join Us! If you're passionate about maintaining the highest standards of engineering quality and supporting the delivery of cutting-edge aerospace systems, we'd love to hear from you. Note: The successful candidate must hold an active or be willing and eligible to obtain SC level security clearance. Please note that access to certain projects may be restricted based on nationality. RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. Privacy Policy and Terms: Click on this link to read the Policy and Terms
Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Dec 06, 2025
Full time
Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Dec 06, 2025
Full time
Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Production / Manufacturing / Development Engineer (Mechanical) £40,000 - £45,000 + 33 Days Holiday + Bonus + Life Assurance + Sick Pay Andover, Hampshire Are you a Production, Manufacturing, or Development Engineer from a mechanical background looking for a truly unique and interesting role, working at the forefront of modern technologies to support the design, development, and production of cuttin click apply for full job details
Dec 06, 2025
Full time
Production / Manufacturing / Development Engineer (Mechanical) £40,000 - £45,000 + 33 Days Holiday + Bonus + Life Assurance + Sick Pay Andover, Hampshire Are you a Production, Manufacturing, or Development Engineer from a mechanical background looking for a truly unique and interesting role, working at the forefront of modern technologies to support the design, development, and production of cuttin click apply for full job details
A global specialist in the design and manufacture of high-temperature metal seals for aerospace, automotive and power generation sectors are seeking an Engineering Manager to join their team to drive the next phase of development and growth. The position benefits from a private pension scheme, non-contractual Business Performance Related Bonus, 24 days annual leave (rising with service) plus Bank Holidays, a working week over 5 days with an early Friday finish, offering excellent work/life balance. As Engineering Manager, you will lead the Design, Production and Manufacturing Engineering teams, creating and delivering new parts and processes, identifying and implementing process improvements and developing the engineering strategy in a high-compliance production environment. Responsible for leading and managing the Engineering function, you will need to be hands-on, technical, detail oriented and a great team-worker. What youll be doing as Engineering Manager: Lead in customer engagement and development of new parts Lead in design, manufacture and repair of roll/form tooling Lead in creation and improvement of precision processes Drive engineering strategy & develop staff, support production, quality and sales functions To be successful in this role you will have proven skills and experience in the following: Proven leadership and management of engineering teams Experience of mixed-mode, high compliance production environments Hold a relevant degree or equivalent level To be considered for the role you should ideally have experience in: Precision metal forming/fabrication Process and productivity improvement New product introduction, process feasibility Apprenticeship and graduate program management Health & Safety, Environmental compliance Declaration of Conformity (DoC) signatory Automation and mechanical/electrical systems Quality assurance & auditing Risk tools (FMEA), statistical tools (SPC/MSA) To apply for this Engineering Manager role, please click apply online and complete the full application process. We welcome all applications however; you must be eligible to work in the UK. Candidate Source Ltd is an advertising agency. Once you have submitted your application it will be passed to the third party Recruiter who is responsible for processing your application. This will include holding and sharing your personal data, our legal basis for this is legitimate interest subject to your declared interest in a job. Our privacy policy can be found on our website and we can be contacted to confirm who your application has been forwarded to. JBRP1_UKTJ
Dec 06, 2025
Full time
A global specialist in the design and manufacture of high-temperature metal seals for aerospace, automotive and power generation sectors are seeking an Engineering Manager to join their team to drive the next phase of development and growth. The position benefits from a private pension scheme, non-contractual Business Performance Related Bonus, 24 days annual leave (rising with service) plus Bank Holidays, a working week over 5 days with an early Friday finish, offering excellent work/life balance. As Engineering Manager, you will lead the Design, Production and Manufacturing Engineering teams, creating and delivering new parts and processes, identifying and implementing process improvements and developing the engineering strategy in a high-compliance production environment. Responsible for leading and managing the Engineering function, you will need to be hands-on, technical, detail oriented and a great team-worker. What youll be doing as Engineering Manager: Lead in customer engagement and development of new parts Lead in design, manufacture and repair of roll/form tooling Lead in creation and improvement of precision processes Drive engineering strategy & develop staff, support production, quality and sales functions To be successful in this role you will have proven skills and experience in the following: Proven leadership and management of engineering teams Experience of mixed-mode, high compliance production environments Hold a relevant degree or equivalent level To be considered for the role you should ideally have experience in: Precision metal forming/fabrication Process and productivity improvement New product introduction, process feasibility Apprenticeship and graduate program management Health & Safety, Environmental compliance Declaration of Conformity (DoC) signatory Automation and mechanical/electrical systems Quality assurance & auditing Risk tools (FMEA), statistical tools (SPC/MSA) To apply for this Engineering Manager role, please click apply online and complete the full application process. We welcome all applications however; you must be eligible to work in the UK. Candidate Source Ltd is an advertising agency. Once you have submitted your application it will be passed to the third party Recruiter who is responsible for processing your application. This will include holding and sharing your personal data, our legal basis for this is legitimate interest subject to your declared interest in a job. Our privacy policy can be found on our website and we can be contacted to confirm who your application has been forwarded to. JBRP1_UKTJ
Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Dec 06, 2025
Full time
Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Dec 06, 2025
Full time
Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 19th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Abatec is seeking an experienced Commissioning Engineer to join our client on a permanent basis. Following the award of a new major framework, our client requires a Commissioning Engineer to support the delivery of major water treatment projects across Devon. The successful candidate will play a vital role in the commissioning of process, mechanical and electrical systems, ensuring projects are delivered to the highest standards. This is a long-term opportunity offering career stability, with secured work extending to at least 2030, exposure to industry-leading projects, and the chance to make a meaningful impact on local communities across Devon As Commissioning Engineer, you will: Lead and manage all commissioning activities (process, mechanical & electrical) on wastewater treatment facilities. Have an input into commissioning strategy reviews and associated documentation. Monitor and review MEICA related project risks. Liaise with the design team, ensuring commissioning requirements are incorporated at design stage and included in the scope of work. Attend commissioning inductions and tool box talks Ensure works are delivered in accordance with specifications, industry standards, and company procedures. Collaborate with design, construction, and operations teams to ensure seamless project execution. Identify and resolve commissioning issues promptly to ensure timely project completion. Maintain clear documentation of all commissioning processes and handover information. Our client requires a Commissioning Engineer with: Working experience with commissioning of process, mechanical and electrical aspects Prior experience in the Water sector SMSTS, CSCS card Full UK driving licence and willingness to travel Salary/Benefits: £50,000 - £60,000 per annum 25 days annual leave plus bank holidays Employer contribution pension scheme Private medical insurance Life assurance Plus additional company benefits If you would like more information, or to apply for this vacancy, please contact Lloyd Barham on (phone number removed). The reference for this vacancy is (phone number removed). We are always looking for candidates for similar positions, so please register your details with us to hear about similar opportunities that you may be interested in. Abatec Ltd. is working as an employment agency on behalf of a client.
Dec 06, 2025
Full time
Abatec is seeking an experienced Commissioning Engineer to join our client on a permanent basis. Following the award of a new major framework, our client requires a Commissioning Engineer to support the delivery of major water treatment projects across Devon. The successful candidate will play a vital role in the commissioning of process, mechanical and electrical systems, ensuring projects are delivered to the highest standards. This is a long-term opportunity offering career stability, with secured work extending to at least 2030, exposure to industry-leading projects, and the chance to make a meaningful impact on local communities across Devon As Commissioning Engineer, you will: Lead and manage all commissioning activities (process, mechanical & electrical) on wastewater treatment facilities. Have an input into commissioning strategy reviews and associated documentation. Monitor and review MEICA related project risks. Liaise with the design team, ensuring commissioning requirements are incorporated at design stage and included in the scope of work. Attend commissioning inductions and tool box talks Ensure works are delivered in accordance with specifications, industry standards, and company procedures. Collaborate with design, construction, and operations teams to ensure seamless project execution. Identify and resolve commissioning issues promptly to ensure timely project completion. Maintain clear documentation of all commissioning processes and handover information. Our client requires a Commissioning Engineer with: Working experience with commissioning of process, mechanical and electrical aspects Prior experience in the Water sector SMSTS, CSCS card Full UK driving licence and willingness to travel Salary/Benefits: £50,000 - £60,000 per annum 25 days annual leave plus bank holidays Employer contribution pension scheme Private medical insurance Life assurance Plus additional company benefits If you would like more information, or to apply for this vacancy, please contact Lloyd Barham on (phone number removed). The reference for this vacancy is (phone number removed). We are always looking for candidates for similar positions, so please register your details with us to hear about similar opportunities that you may be interested in. Abatec Ltd. is working as an employment agency on behalf of a client.
About the job As the Sales & Applications Engineer you will be responsible for generating profitable regional contract works relating to refrigeration and process cooling installations, and growing the customer base to include new contacts within the refrigeration industry. You will also manage contract execution involving design, purchasing and contract management. You will be responsible for contract works throughout the South of England, so need to be fully mobile. We are flexible on location, but the ideal candidate needs to be within a commutable distance of our office in Dartford for day to day activities Main Responsibilities Technical support for both existing and potential new customers. Design, and project manage, within the bounds of our in-house knowledge and discuss and agree sales margins to ensure that these margins are achieved and maintained at contract completion. Calculate heat loads, pipe sizes for both direct and indirect cooling systems. Accurately estimate projects, identifying tailored solution to meet the customers requirements. Allocation of sub contact labour for the installation of contracts with specific responsibility for satisfactory technical and financial result. Responsible for verification of supplier invoicing against orders raised and the preparation of a detailed sales invoices. Our Ideal Candidate Strong written and verbal communication skills MS Office, including word, Excel, PowerPoint and Outlook Prepared to travel within the region and be away from home overnight when required. Project management skills; strong planning and organisational skills; ability to work to tight deadlines and manage conflicting priorities Required Experience Recognised Engineering/Building Services Qualification, Minimum of 2 year s experience in a similar role working within the Refrigeration/Process Cooling Industry. Technical support and quoting experience with all aspects of refrigeration and air conditioning essential (mechanical and electrical). Demonstratable process and refrigeration knowledge in DX and pumped fluid solutions using all most commonly used refrigerants including HFC s, NH3, CO2 Demonstratable knowledge of most modern and commonly used refrigeration control systems. Our Client Our client is one of world s foremost refrigeration solutions providers. Our key activities include the design, manufacture, installation and after sales care of refrigeration and HVAC products. About the Business area The Installation and service division of our client installs HVAC and refrigeration equipment into a wide range of applications. Our flexible service and maintenance solutions allow our engineers to provide planned maintenance, repair, and emergency breakdown cover. Pay & Benefits We offer a competitive salary and a range of great benefits- 26 days annual leave Defined pension contribution plan Life Assurance Company vehicle Private medical scheme Company sick pay scheme Continued professional development, including study leave and financial support for role related qualifications Eye care vouchers Salary Extras, including shopping, hotel and travel discounts
Dec 05, 2025
Full time
About the job As the Sales & Applications Engineer you will be responsible for generating profitable regional contract works relating to refrigeration and process cooling installations, and growing the customer base to include new contacts within the refrigeration industry. You will also manage contract execution involving design, purchasing and contract management. You will be responsible for contract works throughout the South of England, so need to be fully mobile. We are flexible on location, but the ideal candidate needs to be within a commutable distance of our office in Dartford for day to day activities Main Responsibilities Technical support for both existing and potential new customers. Design, and project manage, within the bounds of our in-house knowledge and discuss and agree sales margins to ensure that these margins are achieved and maintained at contract completion. Calculate heat loads, pipe sizes for both direct and indirect cooling systems. Accurately estimate projects, identifying tailored solution to meet the customers requirements. Allocation of sub contact labour for the installation of contracts with specific responsibility for satisfactory technical and financial result. Responsible for verification of supplier invoicing against orders raised and the preparation of a detailed sales invoices. Our Ideal Candidate Strong written and verbal communication skills MS Office, including word, Excel, PowerPoint and Outlook Prepared to travel within the region and be away from home overnight when required. Project management skills; strong planning and organisational skills; ability to work to tight deadlines and manage conflicting priorities Required Experience Recognised Engineering/Building Services Qualification, Minimum of 2 year s experience in a similar role working within the Refrigeration/Process Cooling Industry. Technical support and quoting experience with all aspects of refrigeration and air conditioning essential (mechanical and electrical). Demonstratable process and refrigeration knowledge in DX and pumped fluid solutions using all most commonly used refrigerants including HFC s, NH3, CO2 Demonstratable knowledge of most modern and commonly used refrigeration control systems. Our Client Our client is one of world s foremost refrigeration solutions providers. Our key activities include the design, manufacture, installation and after sales care of refrigeration and HVAC products. About the Business area The Installation and service division of our client installs HVAC and refrigeration equipment into a wide range of applications. Our flexible service and maintenance solutions allow our engineers to provide planned maintenance, repair, and emergency breakdown cover. Pay & Benefits We offer a competitive salary and a range of great benefits- 26 days annual leave Defined pension contribution plan Life Assurance Company vehicle Private medical scheme Company sick pay scheme Continued professional development, including study leave and financial support for role related qualifications Eye care vouchers Salary Extras, including shopping, hotel and travel discounts
