43 jobs found

Severn Trent Water is seeking a Senior Laboratory Technician to support the River Water Quality Monitoring programme on a 12 month fixed term contract, based at the Church Wilne Site in Nottingham. You will manage calibration, maintenance and registration of water quality monitoring equipment, ensuring compliance with environmental regulatory requirements and delivering accurate data. You will support day-to-day laboratory operations, contribute to method development, problem-solving and

If you're someone who enjoys keeping spaces running safely, smoothly and to a high standard-especially in an environment that supports research and teaching-this is a role where your hands-on skills and organisation genuinely make a difference. My client is hiring for a proactive Senior Building Technician to support the day-to-day operations of the estate, working closely with the Building Manager and a wider team. What you'll be doing: Help oversee day-to-day building operations to ensure research and teaching support services run efficiently Install, maintain and support research equipment-liaising with academic and technical colleagues as needed Manage movement and relocation of large or fragile laboratory equipment between labs Support construction and refurbishment work in laboratories, including job allocation, supervision, input and quality control Carry out maintenance and repairs to building fabric and services, handling faults, inspection and escalation when required Plan and participate in preventative maintenance and repairs, including monitoring and fault identification Install, move, modify laboratory furniture and key services (e.g. compressed air, gases, cryogens, water, air handling, extraction systems, vacuum pumps) Distribute and replenish liquid nitrogen, dry ice and other gas stocks as required Use managed waste stream processes (including non-hazardous and recycling), following required record keeping Provide technical support for teaching practices across the estate, alongside Facilities or Laboratory Technicians Understand and support security and fire alarm systems, including activation and periodic testing Provide front-line emergency response during working hours, including incident management (including service shut down/rectification/isolation where needed) Support required admin tasks: follow relevant regulations, assist with risk assessment/method statements, and maintain maintenance/expenditure records Restock consumables and equipment using correct procedures and keep appropriate records Maintain strong working relationships across Chemistry (e.g. catering, reception, stores) and with academic and student stakeholders What you'll bring: A C&G, HNC, HND, NVQ3 or equivalent trade qualification Demonstrable experience in servicing, troubleshooting and repairing smaller laboratory equipment, with mechanical/electrical repair capability Confidence using mechanical engineering and woodworking hand tools Clear knowledge of Health and Safety and building regulations Computer literacy with Microsoft Office (Excel, Word, Outlook) Ability to work flexibly, organise your time, prioritise competing tasks, and deliver to deadlines and a high standard Knowledge of a building management system and PAT testing software Additional information: This is a full-time, on-site role in the centre of Oxford with no parking so you will need to use Park & Ride or direct bus, walk or cycle. Salary range 32 - 37k Hours are 36.5 hours, Monday - Friday 8am - 4pm but finish at 3pm on a Friday (No on call) 28 days Holiday + Xmas Shut Down + 8 Bank Holidays If you're looking for a role that blends practical technical work, operational responsibility and real stakeholder impact, we'd love to hear from you. Apply now to join our client's estate team in Oxford. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.

Job Description About the Role As a Laboratory Technician, you will support the delivery of high-quality environmental studies by performing laboratory activities in accordance with Good Laboratory Practice (GLP) standards. Based at our Environmental laboratory in Flotta, Orkney, you will contribute to ecotoxicology and environmental fate studies while helping to maintain laboratory equipment, facilities, and systems. This role is ideal for someone who enjoys hands-on technical work, has a keen eye for detail, and is motivated to learn new skills. Working closely with laboratory colleagues and study teams, you will play an important role in ensuring the accuracy, reliability, and quality of scientific data. About the Company NOV delivers technology-driven equipment, systems, services, and software solutions supporting energy production and industrial operations worldwide. Through innovation, technical expertise, and operational excellence, NOV helps customers improve safety, reliability, efficiency, and environmental performance across a wide range of industries. Our Environmental laboratory in Flotta, Orkney, supports specialist ecotoxicology and environmental fate studies, contributing to important scientific research and environmental stewardship. What We Offer Full training and structured onboarding Opportunities to develop laboratory and scientific skills Exposure to specialist environmental and ecotoxicology studies A supportive and collaborative team environment Career development opportunities within a global organisation The opportunity to contribute to meaningful environmental research A stable, full-time position with long-term growth potential Ongoing learning and development opportunities Why Join Us? Join our global team at NOV and become part of an organisation that values innovation, collaboration, and continuous development. At our Environmental laboratory in Flotta, Orkney, you'll work alongside experienced professionals in a supportive and friendly team environment where learning and development are encouraged. Whether you're starting your laboratory career or bringing existing experience, you'll have the opportunity to build valuable technical skills, contribute to meaningful environmental research, and develop your career within a global organisation. If you're looking for a role where you can learn, grow, and make a genuine contribution, we'd love to hear from you. About Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team

Quality Control Technician - Training Provided 6 Months Fixed-Term Contract 26,436 - 28,000 Preston Are you looking to develop valuable skills and build a long-term career in Quality Control in the world of complex manufacturing operations and Fast Moving Consumer Goods? This well-established manufacturer supplies household products to many of the UK's leading retailers and is currently undergoing a significant period of investment and growth. As part of a major site consolidation project, the business is expanding operations near Preston and strengthening its Quality team to support the transition. In this role you will support the testing & inspection of raw materials, packaging and finished products, helping to ensure everything meets customer specifications. You'll receive hands-on training, work alongside experienced Quality professionals and gain exposure to manufacturing processes within a FMCG environment. This position would suit a recent graduate with practical laboratory experience, a junior Quality professional looking to enhance their CV, or someone looking to build upon their transferrable skills and begin a career within Quality Control. This is a fantastic opportunity to join a friendly and supportive team where you'll receive genuine training, gain valuable FMCG experience and develop skills that can open doors to future opportunities within Quality, Technical or Manufacturing functions. Day-to-day of the role: Conducting product testing, quality checks and sampling activities on materials and finished products Reviewing specifications, test results and supplier documentation to ensure compliance standards are met Recording quality data, highlighting issues and supporting investigations where required Working closely with Quality and Production teams to maintain consistent product standards The ideal person will have: Experience in laboratory work, quality testing, sampling, inspection or similar Strong attention to detail and the ability to follow procedures accurately and consistently Good IT skills and confidence recording information and maintaining accurate records A positive attitude, eagerness to learn and an interest in developing a career within Quality If you are interested in this position, click apply or contact Stuart Goble at Reed. Quality Control Technician, QC Technician, Q.C, Quality Control Technician, Quality Technician, Quality Assurance, Lab Technician, Laboratory Technician, Sampling, Testing, Graduate, Chemist, Chemistry, Preston, Lancashire, North West, Chorley, Wigan, Blackburn, Blackpool

MATERIALS AND PROCESS LABORATORY TECHNICIAN - 3682-1 Initial 6-month contract (likely to be extended) Stevenage - 4 days onsite per week 33.56ph, UMB inside IR35 Please note, SC level Security Clearance must be in place prior to starting this position. Overview of department: Understanding the technology of Materials and their related use and manufacturing processes is a key part of ensuring that our products meet our demanding technical, cost and reliability requirements. The Material team consists of a federated UK/Fr integrated team based in Mechanical Engineering, operating with a common process set and links to the other materials teams across the business. We have a wide range of test facilities and specialist knowledge within materials used across the business. The Materials group can provide expertise, support and advice, including details of the laboratory facilities and contacts at our sites across the UK and France. We achieve this by: Technical Guidance and Approval in the Selection, characterisation and Use of Materials and Related Processes across all projects. Materials testing, analysis and property verification for both design and manufacturing Assessing and Developing new and emerging technologies Materials and processes consultancy for the Government and MoD Representation on International, Government, MoD, Trade body, Strategic steering bodies and Standard Committees Support to REACH and RoHS adherence First Point of contact for Failure Investigations and Forensic Engineering Provide guidance in the use and control of Hazardous Materials Provide solutions for obsolescence Undertake Technical Assessment and Validation of Supplier / Sub-contractor Processes and Manufactured Parts Provide technical support to in country (offset) design and / or manufacture Quality Assessment of Bought-in items Responsibilities: Wide ranging testing and assessment of materials including metallic materials (aluminium, steels, titanium) and non-metallic materials including composites, polymers, paints and adhesives and related processes. Familiarity with general lab equipment is required and any experience of, XRF, SEM, EDX, OES, FTIR, paint inspection equipment and mechanical testing would be beneficial but not essential. Preparation of test reports, interpretation of Engineering drawings and specifications is expected and use of other IT systems such as Word, Excel and Access. Supporting all aspects of the materials lab with routine testing, inspection and characterisation, failure investigations, material selection, support to the supply chain, first article inspection report reviews and material relifing. Support generating or assessment of compliance data such as REACh, RoHS or environmental aspects of engineering designs. Support investigation and resolution of obsolescence due to supply chain, legislation or other factors Support lab health and safety activities (Eg COSHH & Risk Assessments) and quality activities (Eg SOP writing) Skillset/experience required: Practical Laboratory experience - hands on experience managing daily laboratory operations, including sample testing, logging, preparation and disposal Experience in the Aerospace or Defence Industry advantageous but not strictly required. Assessment of materials and components to established international standards including DEF STANs Experience performing routine calibration, troubleshooting and maintenance on lab equipment Experience supporting the selection, procurement and manufacture of engineering parts or components Familiarity working within a certified quality management team Proficiency in lab and data analytical software (Microsoft Excel, Matlab etc) Strict adherence to lab safety protocols including proper handling of hazardous chemicals, SDS management and wearing of appropriate PPE. Ability to accurately document test procedures, analyse raw data and write clear concise technical reports.

Materials Laboratory Technician 6 month contract Based in Stevenage Offering 33.56ph Inside IR35 Do you have hands-on practical laboratory experience? Do you have proficiency in lab and data analytical software such as Excel, MATLAB, etc.? Do you want to work with an industry-leading company? If your answers are yes to these, then this could be the role for you! As the Materials Laboratory Technician, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry! You will be involved in: Wide-ranging testing and assessment of materials including metallic materials (aluminium, steels, titanium) and non-metallic materials including composites, polymers, paints, adhesives, and related processes Preparation of test reports, interpretation of Engineering drawings and specifications and use of other IT systems such as Word, Excel, and Access Supporting all aspects of the materials lab with routine testing, inspection, and characterisation, failure investigations, material selection, support to the supply chain, first article inspection report reviews, and material relifing Support generating or assessment of compliance data such as REACh, RoHS, or environmental aspects of engineering designs Support investigation and resolution of obsolescence due to supply chain, legislation, or other factors Support lab health and safety activities (E.g. COSHH & Risk Assessments) and quality activities (E.g. SOP writing) Your skillset may include: Practical Laboratory experience - hands on experience managing daily laboratory operations, including sample testing, logging, preparation, and disposal Experience in the Aerospace or Defence Industry is advantageous Assessment of materials and components to established international standards including DEF STANs Experience performing routine calibration, troubleshooting, and maintenance on lab equipment Experience supporting the selection, procurement, and manufacture of engineering parts or components Familiarity working within a certified quality management team Proficiency in lab and data analytical software (Microsoft Excel, MATLAB, etc.) Strict adherence to lab safety protocols including proper handling of hazardous chemicals, SDS management, and wearing of appropriate PPE Ability to accurately document test procedures, analyse raw data, and write clear concise technical reports Familiarity with general lab equipment and any experience of XRF, SEM, EDX, OES, FTIR, paint inspection equipment, and mechanical testing If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

RCMA Agricultural Storage Ltd provide seamless supply-chain integration for our customers to the end user through our strategically positioned grain storage facility in Stratford Upon Avon, Warwickshire. The Role We are looking for an enthusiastic individual to join our team as a Lab Technician at our Stratford upon Avon site. Reporting to the Lab Supervisor, the successful applicant will assist with the smooth running of the Lab, ensuring incoming and out-loading vehicles are weighed in and out, tested and recorded correctly. Key Tasks Helping to coordinate the weighing of incoming and out-loading vehicles. Testing a variety of different arable crops and recording results correctly and clearly both electronically and as paper records. Tasks as directed by Laboratory Supervisor. Working as part of a team, under pressure to a deadline. Gathering accurate information on crop grades, specifications etc. Helping to check driver s paperwork to ensure they are sent to the correct intake pit or bulk tank on site. Adhere to TASCC code of practice for the Testing of combinable crops and animal feeds by accurately testing the grain and following set procedures. Helping to monitor Critical Control Points within the RCMA HACCP system To take responsibility for positive release of product to consumer. Apply methods and techniques to test the quality of raw materials, intermediary and final products and ensure results are within company and customer quality control specifications. Use a variety of instrumentation to conduct physical and chemical analysis. Prepare reagents for testing of product samples where required. Produce certificate of analysis for raw materials, intermediate and finished goods, including positive release of products when the product specification has been confirmed through testing. Conduct laboratory equipment calibration, verification, and daily checks. Ensure that quality levels are maintained in accordance with relevant company procedures and documentation is accurately completed. Carry out internal audits to comply with Laboratory and factory standards(QA role). Conduct environmental swabbing when needed. Ensure all operations are conducted in line with current Health and Safety legislations. The successful applicant will possess the following skills and experience: Educated to degree level with an appropriate qualification in chemistry, food science or general science. Demonstrable experience of using HPLC, GC / FID, ICP -OES or other chemical equipment. Previous working experience conducting laboratory tests with the ability to follow agreed laboratory procedures, within a manufacturing, or process environment. Experience of working with and interpreting technical documents including vendor and customer specifications. Excellent IT skills, for instance using spreadsheet for entering internal quality control data. Previous working experience in an agricultural or food production role would be an advantage Internal Audit Certification and auditing experience would be an advantage. HACCP Awareness would be an advantage. Eligible to live and work in the UK without restriction. Working Pattern Monday to Friday 10:30am to 07:00pm. You will be required to work one weekend in 7 with 2 days off in the following week. We offer a competitive salary, Pension, 33 days holiday (inc Bank Holidays), Private Medical Insurance and Life Assurance 4 times basic salary This role will require working in an agricultural environment with exposure to wheat, grain dust and other allergens. Please note this is a remote site not on a public transport route, and the use of own transport will be necessary. If this sounds like the role for you, click the apply button online and send your CV today.

12 month FTC: This role supports advanced material characterisation activities within a laboratory environment, playing a key role in production campaigns and product validation. The Analytical Scientist will lead laboratory operations, manage a team of technicians while ensure accurate testing, analysis and reporting click apply for full job details

Talentmark are recruiting for a Laboratory Operations Support Technician to join a company in the animal health and pharmaceutical industry on a contract basis for 12 months. Salary: Up to 14.38 per hour PAYE Laboratory Operations Support Technician Role: Provide support to the laboratories Manage administration activities using Documentation Management System Raise purchase orders, complete goods receipts and approve invoices Coordinate maintenance schedules for laboratory equipment Scan and process completed plant batch production records Support scientists by managing periodic review timelines for technical documents Your Background: Previous experience working within a laboratory support or technical administration role Familiarity with Electronic Document Management Systems is preferred Able to manage administrative and laboratory-based tasks Company: Our client specialises in animal health. They advance their vision of food and companionship, enriching life by developing innovative solutions that protect and enhance animal health. Location: This role is based at our clients' site in Speke. Apply: For more information, or to apply for this Laboratory Operations Support Technician, please contact the Key Accounts Team on (phone number removed) or email (url removed). Please quote reference (phone number removed)/1495. It is essential that applicants hold entitlement to work in the UK Please note: This role may be subject to a satisfactory basic Disclosure and Barring Service (DBS) check.

Manufacturing Technician Location: Office based, Whiteley PO15 7AF Salary: £29,000-£33,000, depending on skills and experience Contract: Full Time, Permanent What we offer: In common with many start-ups, we offer a fast-paced, dynamic environment where you can learn a huge amount in a short time, with exposure to everything happening in the company. We look after our staff as they are our key asset, and offer regular salary reviews, share options, lots of flexibility and generous training allowances. Our facilities are commutable from most of Hampshire, West Sussex, Poole, Bournemouth etc. About the company: iFAST is an innovative new medical technology spinout from the University of Southampton, led by an experienced team of entrepreneurs and scientists. We have developed a game changing microfluidics based test for antimicrobial susceptibility, reducing the test time from 48+ to 3 hours to help combat the global threat of antimicrobial resistance, which kills more than 1 million people per year. Job Role: We are now seeking a manufacturing technician to join our team in Whiteley, Hampshire, reporting to our Head of Manufacturing Operations, to help us build our diagnostic instruments. Responsibilities: Manufacturing & Assembly • Assemble instruments and sub-assemblies in accordance with approved work instructions and SOPs. • Carry out mechanical, electrical and electromechanical builds including basic wiring, fitting, alignment and functional checks. • Perform in-process testing, verification steps and instrument-level checks to ensure build quality. • Maintain accurate, clear and compliant manufacturing records, including batch documentation and traceability logs. • Report and document problems and/or obstacles with Quality, processes, equipment and materials to Manufacturing Engineering. • Keep a clean, organised and controlled work area in line with GMP expectations. Quality System Responsibilities • Work within medical device quality system in accordance with EN ISO 13485:2016 and 21 CFR 820. • Operate and maintain manufacturing equipment in line with relevant SOPs. • Participate in Quality discussions, raising observations, ideas and corrective actions where appropriate. • Support non-conformance investigations by providing technical input, build history and documentation. • Contribute to continuous improvement activities across manufacturing processes and documentation. Support & Collaboration • Provide technical support to Quality (e.g. training, input into non-conformance investigations, customer complaints). • Assist with documentation in accordance with standards, manufacturing procedure documentation, and SOPs. • Provide feedback and support for continuous improvement projects. • Periodically presenting your work to the team and our collaborators, and performing other tasks as assigned. Knowledge, Skills & Experience: Essential • Good numeracy and IT literacy and ability to follow and write detailed written instructions. • Experience work in a regulated manufacturing environment working to ISO 13485 or GMP or GLP. • Strong practical skills with hands on assembly, precision tools and manufacturing equipment. • Ability to work methodically with excellent attention to detail and documentation accuracy. • Strong teamwork skills and the ability to manage and prioritise your own workload. • Good problem-solving ability and confidence to raise issues or suggest improvements. • Ability to read and interpret engineering drawing (e.g. CAD). Desirable • Experience with wiring, cable harnesses, crimping or soldering. • Experience working in a controlled environment such as a cleanroom or GLP laboratory. • Previous experience assembling electromechanical or diagnostics instruments. • Experience of lean manufacturing and/or Six Sigma. If you feel you have the necessary skills and experience to be successful in this role, click on APPLY today, forwarding an up-to-date copy of your CV for consideration in the first instance. No agencies please.

12 month FTC: This role supports advanced material characterisation activities within a laboratory environment, playing a key role in production campaigns and product validation. The Analytical Scientist will lead laboratory operations, manage a team of technicians while ensure accurate testing, analysis and reporting click apply for full job details

Refeyn Ltd are looking for a Manufacturing Technician to join our Operations team based in Oxford . You will join us on a full-time, permanent basis, and in return, you will receive a competitive salary between £30,000 £36,000 plus excellent company benefits. About us: Our vision is to accelerate discovery through innovation, empowering the latest scientific breakthroughs in basic research and transforming biotherapeutic development and manufacturing. The Manufacturing Technician role: Are you a skilled technician with a passion for precision? We're looking for a Manufacturing Technician to assemble, test, repair and refurbish cutting-edge instrumentation we are producing. Our product integrate lasers, electro-optic systems, 3D positioners and detection using high specification video cameras. Instrument assembly therefore largely involves electronics box-build and optical alignment, and with sub-assembly components and full system build. Collection and strict management of data is also a key element of the role, as is involvement in Continuous Improvement tasks and projects. Key responsibilities as our Manufacturing Technician: Assembly and test of Mass Photometer instruments: Producing electrical harnesses Assembling electronic sub-systems Assembling and aligning optical components. Final Acceptance Testing (FAT) Test routines are bespoke to Refeyn, but clearly documented training will be given. Producing equipment to detailed Work Instructions, assembly instructions and documented test routines. Involvement at all stages of the wider operations and manufacturing processes, for example: To understand, design and implement lean manufacturing techniques to ensure the manufacture of both electronic and optical systems is well organised, straightforward to perform and provides an economical process. Work with bills of material, part procurement and stock holding to ensure forward planning and smooth running of the operations activities. What we re looking for in our Manufacturing Technician: University degree in relevant discipline or relevant industry experience Relevant industrial operations experience (approx. 3 years) Working in a laboratory environment requiring personal protective equipment (PPE) and handling of lasers and optics. Ability to assemble electronic subsystems, including fault finding (eg continuity testing). Experience of assembly of high precision and/or delicate parts, optics handling and use of lasers. Some experience of testing high-technology equipment prior to shipping. Benefits of becoming our Manufacturing Technician: We anticipate a salary between £30,000 and £36,000 for this role, depending on the candidate s experience. 25 days annual leave per year in addition to bank holidays Up to 7% employer matched pension contribution Private health insurance from day one plus critical illness cover, income protection and life insurance Give as You Earn and Cycle to Work salary sacrifice schemes. Annual Company and Individual bonus scheme Must have a right to work in the UK If you believe you meet the above criteria and would like to join our fantastic team, we would be delighted to hear from you. Click apply today to become one of our Manufacturing Technician!

Lab Senior Technician Operative - Production Quality Assurance and Micro, East Kilbride Shift based (days and nights) - 42hr Annualised Hours (over 7 days) Annual performance related pay bonus + Share scheme + Competitive pension contributions + Personal private medical insuance + Laundered uniform + All safety equipment provided + Subsidised canteen on-site + Free hot and cold drinks + Free parking + Excellent parental benefits What you become part of: East Kilbride Operations is a high performing manufacturing site producing around 20 million cases of drinks each year across six production lines, including both glass and PET formats. It is the only site in Great Britain producing Appletiser in glass, making it a unique and strategically important operation. With approximately 200 colleagues on site, the environment is collaborative, fast paced, and supportive. Joining this team offers not only exposure to a complex and quality driven manufacturing environment, but also access to broader career opportunities across other GB sites and pan European locations. What to expect: In this role, you will be a key member of the QESH team, acting as a quality guardian on shift and ensuring products consistently meet the highest standards. You will combine hands on laboratory expertise with strong collaboration across production teams to drive compliance, quality, and continuous improvement. Key responsibilities include: Acting as the primary point of contact for quality on shift, providing expert guidance and escalation where required Conducting analytical, sensory and microbiological testing in a consistent, controlled, and compliant manner Performing detailed analysis and supporting investigations to protect product integrity and QESH standards Monitoring product compliance and supporting operational teams through hands on coaching, troubleshooting, and training Managing quality data and completing administrative tasks within the quality monitoring systems You will also play an important role in ensuring equipment and processes are robust and reliable: Delivering the calibration programme to ensure all measuring equipment provides accurate and dependable results Supporting the implementation of the site Quality Plan and driving adherence to agreed ways of working Maintaining high standards of safety, hygiene, and housekeeping, demonstrating a zero accident mindset This role offers strong involvement in continuous improvement and capability building: Supporting the QA Lead and wider teams to achieve quality objectives and close audit actions Leading or contributing to root cause investigations for non conformance and microbiological issues Driving GMP standards through audits, engagement with colleagues, and continuous improvement initiatives Writing and developing laboratory procedures and ensuring effective training and verification within the team In addition, you will contribute to the sensory and microbiological excellence of the site: Conducting enhanced sensory testing to support product release and maintain high quality standards Participating in proficiency testing and additional testing programmes Managing non conformance processes on shift, including initial investigation and sharing learnings across teams Skills & Essentials: To be successful in this role, you will bring a blend of technical expertise, attention to detail, and a proactive approach to quality and teamwork. Experience working within an FMCG or manufacturing environment Practical understanding of Quality Assurance principles, with strong organisational and prioritisation skills Good working knowledge of systems, including Microsoft Office Microbiology knowledge or proven experience in a related field is advantageous HACCP qualification (Level 3 or above) is beneficial Experience of analytical testing and working to ISO standards Proven hands-on experience with HPLC operation. Interpret chromatographic data, troubleshoot instrumentation, and ensure accurate documentation of results. Strong understanding of chromatographic principles, sample preparation, and data analysis software. Ability to work to GLP/GMP standards with meticulous attention to detail. Eligibility to work in the UK is required. This is an excellent opportunity for someone looking to develop their career in a quality focused, high performing manufacturing environment, where their contribution has a direct impact on product excellence and customer satisfaction. The closing date for applications is 01/06/26. We reserve the right to close this advertisement early if we receive a high volume of applications. To ensure you are considered for this role, we encourage you to apply as soon as possible. We are Coca-Cola Europacific Partners (CCEP) - a dedicated team of 42,000 people, serving customers in 31 countries, who work together to make, move and sell some of the world's most loved drinks. We are a global business and one of the leading consumer goods companies in the world. We help our 2.1 million customers grow, and we are constantly investing in exciting new products, innovative technologies and fresh ideas. This helps us to delight the 600 million people who enjoy our drinks every day. From gender, age and ethnicity to sexual orientation and different abilities, we welcome people from all walks of life and empower unique perspectives. We recognise we've got some way to go, but we'll get there with the support of our people. It's them who drive our future growth. To find out more about what it's like to work at and our culture we would welcome you to speak to one of our employees on our live chat platform, just click here to speak to an insider . We recognise some people prefer not to participate in alcohol related sales, interactions, or promotions. If that's true for you - please raise this with your talent acquisition contact who will advise you on whether this role includes activities related to our alcohol portfolio.