31 jobs found

Engineering Test Engineer Worsley Mon-Thurs 7am-5.30pm 34,000 - 37,000 Job Purpose The Engineering Test Engineer is responsible for planning, developing, and executing tests to verify that products, systems, and components meet design, performance, quality, and regulatory requirements. The role supports product development, manufacturing, and continuous improvement activities through robust testing and data analysis. Key Responsibilities Develop and execute test plans, procedures, and validation protocols. Design and maintain test equipment, fixtures, and automated test systems. Conduct functional, performance, environmental, reliability, and endurance testing. Analyse test results and identify failures, trends, and root causes. Produce detailed test reports and communicate findings to engineering teams. Collaborate with design, manufacturing, quality, and supply chain teams to resolve technical issues. Verify compliance with customer, industry, and regulatory requirements. Support product qualification, verification, and certification activities. Assist with Failure Mode and Effects Analysis (FMEA) and risk assessments. Develop and improve test methods to increase efficiency, accuracy, and repeatability. Ensure testing activities comply with company quality management systems and relevant standards. Maintain calibration and validation records for test equipment. Assist in managing obsolescence projects Required Skills & Experience Essential Degree or HNC/HND in Engineering (Mechanical, Electrical, Electronic, Aerospace, Manufacturing, or related discipline). Experience in engineering testing, validation, verification, or quality assurance. Ability to interpret engineering drawings, specifications, and standards. Strong problem-solving and root cause analysis skills. Experience with data acquisition and analysis tools. Excellent technical report writing and communication skills. Desirable Experience in aerospace, automotive, defence, manufacturing, or other regulated industries. Knowledge of AS9100, ISO 9001, or similar quality standards. Experience with automated test systems, LabVIEW, Python, or PLC-based test equipment. Understanding of statistical analysis and measurement system capability studies (e.g., Gauge R&R). Key Competencies Attention to detail Analytical thinking Technical troubleshooting Planning and organisation Teamwork and collaboration Continuous improvement mindset Safety and quality focus Typical Deliverables Test plans and procedures Validation and verification reports Test data analysis and recommendations Non-conformance and failure investigation reports Continuous improvement proposals Benefits 37.5-hour condensed 4-day working week , offering an excellent work-life balance. Company healthcare scheme following successful completion of probation. Company pension scheme following successful completion of probation. Flexible holiday scheme, with the option to buy or sell up to one week's annual leave (minimum one day), following probation. 22.5 days annual leave plus statutory bank holidays. Christmas shutdown, with leave taken from annual holiday entitlement.

Location: Cambridge (CB25) Duration: Permanent Hours: 37.5 per week 8am - 4pm (Monday to Friday) Salary: Competitive Job Reference: 36074 An exciting opportunity has arisen for a Software Engineer to support the development and optimisation of software systems within a high-tech manufacturing environment. Our Cambridge based client is looking to expand their busy team. This role focuses on production test automation, new product introduction (NPI) and continuous improvement of engineering processes. Key Responsibilities - Support the transfer of new products from development into manufacturing - Develop and maintain automated test solutions for production, including verification and calibration - Collaborate with engineering teams to improve product testability and manufacturing efficiency - Implement and manage processes for software deployment, firmware programming and configuration control - Drive automation and process improvements to increase throughput and reduce manual intervention - Provide production support, including fault diagnosis, root cause analysis and corrective actions - Maintain clear technical documentation and support change control processes - Work cross-functionally with engineering, production and quality teams Skills and Experience - Degree or equivalent experience in Software Engineering, Computer Science, or similar - Experience developing software for test automation or manufacturing environments - Strong knowledge of configuration control and software release processes - Experience with tools such as LabVIEW (preferred) and ideally Python or C/C++ - Ability to troubleshoot software and embedded systems in a hardware-integrated environment - Strong attention to detail and documentation skills Desirable - Experience supporting NPI through to production - Familiarity with embedded systems and manufacturing test equipment - Understanding of quality standards and controlled engineering environments Please contact us as soon as possible for more details or apply below!

This is an ideal role for a hands-on engineer who enjoys taking ownership of complex manufacturing and test engineering projects. If you're looking to take your career to the next level within a growing, innovative business, this opportunity offers the chance to play a key role in developing manufacturing capability for cutting-edge RF and satellite communications technology. With continued investment in new products and emerging technologies, you will have the opportunity to make a genuine impact by leading New Product Introduction (NPI) activities and developing advanced automated RF test solutions. Based in Stevenage, you will work closely with design, manufacturing and production teams to ensure new products are successfully transitioned into manufacturing while driving improvements in production efficiency, quality and test capability. This is a hands-on position where you will take ownership of introducing new products into manufacturing and establishing automated RF production test systems from concept through to implementation. You will design and develop test equipment, jigs and fixtures, write LabVIEW software to automate RF test equipment, commission new production test stations, and produce all manufacturing and test documentation required to support production. Alongside this, you will drive continuous improvement initiatives, provide technical support throughout the product lifecycle, train production staff, audit manufacturing processes, and ensure the highest standards of quality, reliability and efficiency are maintained. The successful candidate will have a strong background within an electronics manufacturing environment, with experience supporting New Product Introduction (NPI) activities and developing manufacturing test solutions. You should understand how production lines are established, optimised and supported, and have proven experience in RF and microwave testing, including designing and automating RF test equipment using LabVIEW. This role would suit someone who enjoys solving complex engineering challenges and taking ownership of projects from concept through to production. This is a pivotal position within the engineering team, offering the opportunity to influence manufacturing strategy, collaborate with cross-functional teams, and see innovative, high-tech products progress from initial concept through to full-scale production. It is an exciting opportunity to join a growing organisation where your technical expertise will have a direct impact on the future success of the business. Key Requirements HND or Degree in Electronics Engineering, Production Engineering or a related engineering discipline. Strong LabVIEW programming and RF test automation experience. Proven experience within an electronics manufacturing environment. Experience supporting New Product Introduction (NPI) and manufacturing engineering activities. Strong understanding of RF and microwave testing and automated production test systems. Experience designing test equipment, fixtures and manufacturing documentation.

Graduate/Junior LabVIEW Engineer 30,000 - 38,000 + Training + Private Healthcare + 33 Days Holiday + Benefits Gloucester Are you a recent graduate or a junior with a background in software engineering, computer science, automation or robotics? Do you want to start your career working with LabVIEW and develop specialist skills in automation and control systems? On offer is a fantastic opportunity to join a well-established engineering company that delivers bespoke software and hardware solutions across industries such as aerospace, defence, petrochemical, manufacturing, automation and telecommunications. With a reputation for innovation and quality, they provide tailored training and development to help graduates progress quickly into professional engineering roles. As a Graduate/Junior LabVIEW Engineer, you will work alongside highly skilled programming engineers, gaining hands-on training in LabVIEW and other development software. You will be given exposure to real projects, learning how to program and integrate complex machinery, and supporting the development of automation and test systems that serve clients worldwide. This is a great opportunity for a graduate who is motivated to learn, keen to develop technical expertise, and excited by the chance to build a career working on cutting-edge automation projects with long-term support and progression. The role: Graduate/Junior LabVIEW Engineer Hands-on training in LabVIEW and other development tools Programming and small project tasks under supervision Exposure to control, automation and test system development Long-term technical development and progression opportunities The person: Degree in Computer Science, Software Engineering, Automation Engineering, Robotics or related subject University modules/projects in control systems, robotics, automation, LabVIEW or C++ Strong interest in industrial automation and control technology Eligible to work in the UK Reference Number: BBBH - BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Test Development Engineer Gloucester 50,000 Permanent We are looking for a Test Development Engineer to design, develop and maintain automated test solutions for advanced electronic products. Working closely with Electronics, Firmware and Mechanical Engineers, you'll support products from prototype through to production, ensuring they are thoroughly tested and reliable. Key Responsibilities Develop automated test systems using LabVIEW. Design test equipment, fixtures and jigs. Support PCB bring-up, debugging and fault finding. Develop microcontroller-based test systems (e.g. STM32, Raspberry Pi, Arduino). Write test procedures and documentation. Work with engineering teams to resolve technical issues and improve test processes. Required Experience Automated test equipment development. Strong LabVIEW experience. Electronics design and PCB debugging. Embedded hardware and microcontrollers. Experience using oscilloscopes, multimeters and other test equipment. Knowledge of C, C++ or Python is beneficial. Desirable NI TestStand. CAD and 3D printing. FPGA experience. EMC or environmental testing. We're looking for a hands-on engineer with a passion for electronics and test development who enjoys solving technical challenges and improving product quality.

We are looking for a Senior Manufacturing Engineer-Electrical to join our Christchurch, Dorset team! As a Senior Manufacturing Engineer for our Christchurch location, you will be responsible for the introduction of new products to production, support current production lines and ensure services are always available to production. Location: Christchurch, Dorset We Take Care of Our People Work-life balance through our Hybrid working, flexitime program and condensed work week (role dependent) I Paid Time Off I Retirement with Employer Match I Health and Wellness Benefits I Learning and Development Opportunities I Competitive Pay I Bonus Scheme I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture Your Challenge Assist in Introduction of new products to production Actively work with Engineering on all DFM/testability/manufacturability issues and design of new products Develop new manufacturing processes and build guides Design and produce assembly jigs and fixtures including electrical test boxes Layout manufacturing cells with all tooling and services Support Current Production Suggest and implement improvements to current production processes Investigate and solve manufacturing problems Investigate Quality problems caused by build and external suppliers Identify new production methods and tooling Design and prototype tooling Update Existing Build guides in line with improvements and Engineering changes Investigate faults identified by other departments and recommend action to prevent reoccurrence Lean tools knowledge and experience (5S, continuous improvement, etc) Automation knowledge Take ownership for departmental projects Ensure services available to production at all times and equipment available and safe to use What You Bring HNC/Degree Engineering discipline (Manufacturing/ /Electronics) 5+ years experience in a similar role in Low/medium/high volume Electro-mechanical manufacturing environment (Less experience/other industry considered) Computer literate (MS Word, MS Excel, Solidworks) Knowledge of ERP systems Knowledge of material processing processes Team player Can work as part of a dynamic team. Good communication skills with all levels of staff across all departments Electrical fault finding skills Electrical design of test boxes and circuits Understanding of LabView software Who We Are With over 50 years of experience in aviation technology, Curtiss-Wright's Sensors Division is continuing the legacy of flight innovation, providing critical components on a variety of commercial, defense and industrial platforms. From solenoid valves and sensors, to linear and rotary actuators, we work closely with systems integrators to deliver the most reliable products on the market. The state-of-the-art facility has extensive design and manufacturing capabilities as well as in-house environmental stress screening. The facility is committed to quality and excellence in manufacturing for our flight recorder, air data computer, video management systems, computing systems, mission displays and video recorder products. Our Values Environmental, Social and Governance No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright . Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law click here for more information If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request accommodate your request.

Job Title: Electronics Test Engineer Location: County Durham (onsite) Salary: Up to £45k (depending on experience) Role Overview This is an exciting opportunity to join an organisation at the cutting edge of electronics engineering. We're looking for a creative, innovative, and motivated Electronics Test Engineer who brings both technical strength and a proactive, detail-driven approach. If you have a solid foundation in electrical and electronic engineering, supported by hands-on experience in a manufacturing, engineering, or test environment, we'd love to hear from you! You'll bring strong technical capability in LabVIEW programming , test equipment development , and troubleshooting , supported by an organised, structured way of working. As you'll be working closely with teams across the business, excellent communication skills, adaptability, and a collaborative mindset are essential. Key Responsibilities Develop and test plans for new electronic products. Produce test specifications aligned with customer requirements and internal standards. Design, build, and validate new test equipment and fixtures for manufacturing. Maintain and improve existing test equipment to ensure accuracy, reliability, and efficiency. Manage version control for compiled firmware files and support programming fixtures. Provide technical support and troubleshooting to production teams. Guide and support Electronics Technicians. Verify and validate test equipment and fixtures in line with industry standards. Keep accurate documentation and records per quality systems and clearly communicate test results. About You Degree in Electrical and Electronic Engineering (BEng) or equivalent qualification/experience 1-2 years' experience in an electronics or manufacturing test engineering role Strong LabVIEW programming skills plus experience with C# and Arduino platforms Experience working with SQL databases for test data collection and analysis. Excellent fault-finding and troubleshooting skills for both test equipment and electronic products Effective verbal and written communication skills Please note we cannot offer sponsorship for the role. If interested, please send over an updated CV.