Job Title: C&I and Senior C&I Engineers required - Contract - Inside IR35 (32222) Location: Nuclear Facility, Cheshire Salary: £50-£65ph Inside IR35 (Umbrella take home £1266pw-£1623pw + any over time worked) Hours: 38.75 hours per week (8/8.30am starts) Contract / Permanent: Contract - 12 months minimum - likely to extend Site Based / Office / Remote: Site - 3/2 split - Site/WFH - but this is to be discussed at interview stage depending on workload. Start Date: ASAP Job Overview: Our client, a trusted, long-term supplier to the nuclear industry, specialising in safe, cost effective and reliable uranium enrichment services, are looking for a Senior EC&I Engineer on a contract basis (inside IR35), to be based in Capenhurst near Chester. Rate: £50-65 Umbrella (Inside IR35) A senior C&I engineer is required due to increasing project commitments. The job involves the design, testing and commissioning of modern, PLC and SCADA based control systems, along with appropriate restoration and replacement of obsolete hardwired logic systems, always taking into account safety functionality required for a Nuclear Licenced Site. Please be aware that this contract position is subject to passing: Security Clearance Medical, drug and alcohol tests Still curious? Click apply and one of our consultants will give you a call EC&I Partners in acting as an employment business and an employment agency
Apr 28, 2024
Seasonal
Job Title: C&I and Senior C&I Engineers required - Contract - Inside IR35 (32222) Location: Nuclear Facility, Cheshire Salary: £50-£65ph Inside IR35 (Umbrella take home £1266pw-£1623pw + any over time worked) Hours: 38.75 hours per week (8/8.30am starts) Contract / Permanent: Contract - 12 months minimum - likely to extend Site Based / Office / Remote: Site - 3/2 split - Site/WFH - but this is to be discussed at interview stage depending on workload. Start Date: ASAP Job Overview: Our client, a trusted, long-term supplier to the nuclear industry, specialising in safe, cost effective and reliable uranium enrichment services, are looking for a Senior EC&I Engineer on a contract basis (inside IR35), to be based in Capenhurst near Chester. Rate: £50-65 Umbrella (Inside IR35) A senior C&I engineer is required due to increasing project commitments. The job involves the design, testing and commissioning of modern, PLC and SCADA based control systems, along with appropriate restoration and replacement of obsolete hardwired logic systems, always taking into account safety functionality required for a Nuclear Licenced Site. Please be aware that this contract position is subject to passing: Security Clearance Medical, drug and alcohol tests Still curious? Click apply and one of our consultants will give you a call EC&I Partners in acting as an employment business and an employment agency
NES Fircroft are currently recruiting for an I&C Application Engineer for our client, who are a world-renowned power technology company. I&C Engineer / Application Engineer Location: St. Neots Contract position Must have: Control and instrumentation biased engineer with 5-10 years experience (Senior Engineer level) working in a production and/or project engineering environment Good understanding of i click apply for full job details
Apr 28, 2024
Contractor
NES Fircroft are currently recruiting for an I&C Application Engineer for our client, who are a world-renowned power technology company. I&C Engineer / Application Engineer Location: St. Neots Contract position Must have: Control and instrumentation biased engineer with 5-10 years experience (Senior Engineer level) working in a production and/or project engineering environment Good understanding of i click apply for full job details
Working within our Facility Engineering team, we are looking to appoint an experienced Control and Instrumentation (C&I) Engineer (Plant & Building Services) to deliver professional engineering services across our plant and equipment. This is an excellent opportunity for you to apply your expertise to deliver engineering solutions during the lifecycle of our facilities and in return receive excellent training and development to help you further your career. Control and Instrumentation Engineer Location: Reading Salary: 35,720 - 51,580 depending on experience plus allowances As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site Working within our Facility Engineering team, we are looking to appoint an experienced C&I Engineer to deliver professional engineering services across our plant and equipment. This will include: Applying expertise in C&I building services and associated plant to deliver engineered solutions within the operational lifecycle phase. Produce modification packages, manage configured plant changes, and act as intelligent client in acquiring or specifying engineering services or products. Identify and escalate business risk or opportunities arising from the condition of engineered systems and structures in the interests of safety, regulatory compliance, quality, and reliability. Take ownership of engineering issues or opportunities. Plan, manage, and collaborate to deliver sound, safe solutions to enable delivery of the programme and our obligations to society. Provide advice, guidance, progress reports, and supporting documentation (or review) to stakeholders including Senior Leadership, Operations Management, Process Owners, Operators, Maintainers, and Occupants. Adherence to Company Management System requirements, relevant Technical Standards & Legislation, and business controls. Professional, ethical, and courteous conduct. Applying Maintenance & Reliability Principles; enact as directed by planning, output from Failure Modes & Effects Analysis. Analyse relevant metrics and contribute to Key Performance Indicators and other reporting as required. Assist in Reliability Centred Maintenance planning and perform Root Cause Analysis. Opportunity to undertake compensated and non-compensated secondary roles providing various support capabilities. This role will give you the opportunity to work for one of the area's largest employers where you will have the opportunity to develop your expertise whilst making a direct and visible contribution to the successful running of our business. We are particularly interested to hear from candidates with experience in some or all of the following: C&I building services (PLCs, BMS, HVAC, SCADA, HMIs, analogue etc.) and industrial processes, with good awareness of electrical building service and mechanical systems. A good awareness of relevant legislation, supporting ACOP, best practice, and common industry standards. Experience within the higher hazard / regulated industries (e.g. nuclear, petro-chem, pharma etc.). Membership of an engineering institution and/or Incorporated Engineer or equivalent. Previous experience as an installer or maintainer likely beneficial, although this role is more akin to consultancy services in lieu of hands on technical tasks. We would love to hear from individuals with a minimum qualification L4 NQF (HNC) with suitable additional experience (a degree in an engineering discipline desirable), who are looking to further their career in a company that can offer superb training and development opportunities. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role and be willing and able to work in designated areas.
Apr 26, 2024
Full time
Working within our Facility Engineering team, we are looking to appoint an experienced Control and Instrumentation (C&I) Engineer (Plant & Building Services) to deliver professional engineering services across our plant and equipment. This is an excellent opportunity for you to apply your expertise to deliver engineering solutions during the lifecycle of our facilities and in return receive excellent training and development to help you further your career. Control and Instrumentation Engineer Location: Reading Salary: 35,720 - 51,580 depending on experience plus allowances As part of our People Promise, AWE (one of the best 25 big companies to work for in the UK) has a range of benefits to suit you. These include: Time to recharge your batteries with 270 hours of annual leave (plus every other Friday off work) Consideration for flexible working arrangements so that your work may fit in with your lifestyle. Just let us know on your application if you wish to work part time Opportunities for Professional Career Development that include funding for the annual membership of a relevant professional body, access to mentors and training Employee Assistance Programme and Occupational Health Services A generous defined contribution Group Personal Pension (we will pay between 9% and 13% of your pensionable pay depending on your own contribution) Life Assurance Discounts - access to savings on a wide range of everyday spending Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring for your family A host of voluntary & core benefits to suit your health and wellbeing - more information available on our careers site Working within our Facility Engineering team, we are looking to appoint an experienced C&I Engineer to deliver professional engineering services across our plant and equipment. This will include: Applying expertise in C&I building services and associated plant to deliver engineered solutions within the operational lifecycle phase. Produce modification packages, manage configured plant changes, and act as intelligent client in acquiring or specifying engineering services or products. Identify and escalate business risk or opportunities arising from the condition of engineered systems and structures in the interests of safety, regulatory compliance, quality, and reliability. Take ownership of engineering issues or opportunities. Plan, manage, and collaborate to deliver sound, safe solutions to enable delivery of the programme and our obligations to society. Provide advice, guidance, progress reports, and supporting documentation (or review) to stakeholders including Senior Leadership, Operations Management, Process Owners, Operators, Maintainers, and Occupants. Adherence to Company Management System requirements, relevant Technical Standards & Legislation, and business controls. Professional, ethical, and courteous conduct. Applying Maintenance & Reliability Principles; enact as directed by planning, output from Failure Modes & Effects Analysis. Analyse relevant metrics and contribute to Key Performance Indicators and other reporting as required. Assist in Reliability Centred Maintenance planning and perform Root Cause Analysis. Opportunity to undertake compensated and non-compensated secondary roles providing various support capabilities. This role will give you the opportunity to work for one of the area's largest employers where you will have the opportunity to develop your expertise whilst making a direct and visible contribution to the successful running of our business. We are particularly interested to hear from candidates with experience in some or all of the following: C&I building services (PLCs, BMS, HVAC, SCADA, HMIs, analogue etc.) and industrial processes, with good awareness of electrical building service and mechanical systems. A good awareness of relevant legislation, supporting ACOP, best practice, and common industry standards. Experience within the higher hazard / regulated industries (e.g. nuclear, petro-chem, pharma etc.). Membership of an engineering institution and/or Incorporated Engineer or equivalent. Previous experience as an installer or maintainer likely beneficial, although this role is more akin to consultancy services in lieu of hands on technical tasks. We would love to hear from individuals with a minimum qualification L4 NQF (HNC) with suitable additional experience (a degree in an engineering discipline desirable), who are looking to further their career in a company that can offer superb training and development opportunities. Candidates must be willing and able to obtain and maintain the necessary security clearance for the role and be willing and able to work in designated areas.
Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs. Key Responsibilities Support in test activities across all hot fire and environmental test facilities. Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety. Develop test, maintenance, and setup procedures for all test activities. Requirements Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the
Apr 26, 2024
Full time
Propulsion Test Engineer with mechanical fitting expertise required. This position involves overseeing the design implementation, conducting Hot Fire Testing programs. Key Responsibilities Support in test activities across all hot fire and environmental test facilities. Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety. Develop test, maintenance, and setup procedures for all test activities. Requirements Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment. Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions. Must have undergone at least Level 4 training on the
Your Role Surveying & writing clear reports. Production of detailed and professional functional design specifications (FDS) to a high quality. Bespoke program development, configuration and modification of PLCs, HMIs and SCADA systems. Production and delivery of professional Factory Acceptance Tests (FAT), Customer facing FATs (CFAT) and Site Acceptance Tests (SAT) reports. Production of Risk Assessments and Method Statements (RAMS). On site installation, testing, fault finding and commissioning. Managing project related correspondence, plans, deliverables and documentation. Aiding others with delivery of projects, and training. Essential for Role: Experienced in Industrial Automation (Specifically, Allen Bradley PLC ladder logic, FTView HMI), software design and implementation, with a sound knowledge of Process Control techniques. Strong commissioning capabilities to ensure projects are delivered safely (site work may involve short periods away from home depending on your location). Attention to detail Capable problem solver Effective communicator to liaise with colleagues and external clients / contractors Able to self-manage effectively in order to take on projects and lead them to completion. Comfortable working alone and in a team. Computer literate / good IT skills. Willing and able to train others. UK Driving License. Desirable for Role Experience with Control Logix, Compact Logix, Micro Logix, SLC PLC's. WonderWare Achestra System Platform & InTouch HMI. Industrial Networking Iconics Experience with instrumentation Electrical experience with a knowledge of control panels and MCC's including fault finding, repair and modification. Experience with other PLCs & HMIs and SCADA configuration packages Able to read / produce electrical drawings. Water Industry Experience. Other Information Company van, laptop and mobile phone provided. Working hours 07:30 - 16:00, Monday - Friday. 25 days annual leave plus bank holidays (Rising to 25 after 5 years' service). Auto enrolment pension scheme. Mileage payment incentive for driving to/from site, outside of working hours. 1000 Refer a friend scheme.
Apr 25, 2024
Full time
Your Role Surveying & writing clear reports. Production of detailed and professional functional design specifications (FDS) to a high quality. Bespoke program development, configuration and modification of PLCs, HMIs and SCADA systems. Production and delivery of professional Factory Acceptance Tests (FAT), Customer facing FATs (CFAT) and Site Acceptance Tests (SAT) reports. Production of Risk Assessments and Method Statements (RAMS). On site installation, testing, fault finding and commissioning. Managing project related correspondence, plans, deliverables and documentation. Aiding others with delivery of projects, and training. Essential for Role: Experienced in Industrial Automation (Specifically, Allen Bradley PLC ladder logic, FTView HMI), software design and implementation, with a sound knowledge of Process Control techniques. Strong commissioning capabilities to ensure projects are delivered safely (site work may involve short periods away from home depending on your location). Attention to detail Capable problem solver Effective communicator to liaise with colleagues and external clients / contractors Able to self-manage effectively in order to take on projects and lead them to completion. Comfortable working alone and in a team. Computer literate / good IT skills. Willing and able to train others. UK Driving License. Desirable for Role Experience with Control Logix, Compact Logix, Micro Logix, SLC PLC's. WonderWare Achestra System Platform & InTouch HMI. Industrial Networking Iconics Experience with instrumentation Electrical experience with a knowledge of control panels and MCC's including fault finding, repair and modification. Experience with other PLCs & HMIs and SCADA configuration packages Able to read / produce electrical drawings. Water Industry Experience. Other Information Company van, laptop and mobile phone provided. Working hours 07:30 - 16:00, Monday - Friday. 25 days annual leave plus bank holidays (Rising to 25 after 5 years' service). Auto enrolment pension scheme. Mileage payment incentive for driving to/from site, outside of working hours. 1000 Refer a friend scheme.
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have experience in delivering Conceptual Design and Basic design packages relating to C&I systems and equipment? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Apr 25, 2024
Contractor
Are you willing and able to obtain security clearance? Do you have experience working within Nuclear (Or any other highly regulated sector)? Do you have optioneering, Feasibility and FEED experience? Do you have experience in delivering Conceptual Design and Basic design packages relating to C&I systems and equipment? Description As a member of the design team, you will work with one of our key clients in the Nuclear sector, delivering to our Client's multiple customers, Front End Engineering Design (FEED) including technical feasibility and best available technology (BAT) studies. You will act as C&I lead engineer in the delivery of Conceptual and Basic Design of new build or modifications of (production) facilities; providing directions and oversight regarding design development to third party engineering service providers. Providing your expert knowledge and advice, from a technical seniority perspective, you will manage Plant Design requirement specifications, including Asset protection and management strategy, CapEx plans, Safety and Learning from Experience. You will be part of developing the Client's Group design standards to meet world class safety standards, site license requirements and providing competitive advantages to be supplier of choice in the Nuclear (Enrichment) business. This role will require some onsite working initially, with a hybrid approach thereafter. Responsibilities Ensure advanced plant designs comprises safety features based on best industrial practice and lessons learnt from the (nuclear) business. Determine C&I (automation) design engineering aspects, options and evaluation in contribution to feasibility/optioneering/best available technology studies. Delivery of Conceptual Design and Design Specifications with focus on C&I expertise area. Delivery of Basic Design packages concerning Core Plant Technology (CPT) with respect to C&I systems and equipment. Provide directions and oversight concerning Detailed Design and supplier manufacturing quality processes on request of site or group project managers. Define and maintain Core Plant Technology (CPT) design expertise on the basis of Client's best (safety) practice and world class state of the art technology (Design Technology Excellence Centre). Requirements Bachelor's degree in Electronics, Computer Science, Process Automation or Robotics. Any other equivalent in combination with a Professional Engineer (PE) license obtained by accredited examination in associated areas. Recognized specialist in expertise area; high, in-depth level of knowledge and problem solving capabilities. Demonstrable track record in successful design delivery involving conceptual designs and FEED of complex process facilities. Minimum of 3 years in role of lead engineer and/or design engineering manager. Specific knowhow and technical skills Ability to model and simulate complex stationary and dynamic integrated process systems with respect to process and mechanical requirements, design starting points. C&I (automation) expertise in process industry. Capability to analyse (measurement) data of complex process systems to solve or improve performance and understand (root) cause of events. ersg are an equal opportunities employer; we are committed to promoting equality of opportunity for all job applicants. We do not discriminate against applicants on the basis of age, sex, race, disability, pregnancy, marital status, sexual orientation, gender reassignment or religious background; all decisions are based on merit.
Bennett and Game Recruitment LTD
Basingstoke, Hampshire
Lead Technical & Design Engineer - Valves - MC(phone number removed) Technical Engineering Manager required for a valve manufacturer based in Basingstoke. The successful candidate will be an experienced engineer ideally within valves. There is a small team you would be mentoring with the rest of the management team. This is for a smaller friendly open business. Lead Technical & Design Engineer - Valves - Position Overview Sizing valves Taking a lead in design engineering CAD skills The Valves Engineer will lead the design and manufacturing process and support the product development of self acting pressure regulators and pilot operated control valves Using Solid Edge Create and review valve specifications , calculations and data sheets in a heavily regulated industry. Deliver project documentation and specifications with clients and colleagues to ensure quality, functionality and compliance. Selecting and sourcing materials required used in the construction of industrial products Produce and maintain Engineering drawings and bill of materials to allow manufacture of components. Assisting with the implementation of the engineering document and component system Ensuring standards are met Customer Project Management Application Engineering Instrumentation Acting as a pivot between sales and engineering Lead Technical & Design Engineer - Valves Position Requirements Experienced engineer with experience in valves or similar Lead Technical & Design Engineer - Valves Position Remuneration Salary dependent on experience but likely 45k- 55k Flexible hours (core hours 07:00-15:30 but can start later if needed) 37.5 hour week Hybrid work available (2 days working from home a week) Generous holiday Scheme 25 days a year plus 8 statutory days Market leading Pension Scheme Scope to progress within the company On site parking Sick Pay Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, and contact you in relation to this application and the services we offer.
Apr 25, 2024
Full time
Lead Technical & Design Engineer - Valves - MC(phone number removed) Technical Engineering Manager required for a valve manufacturer based in Basingstoke. The successful candidate will be an experienced engineer ideally within valves. There is a small team you would be mentoring with the rest of the management team. This is for a smaller friendly open business. Lead Technical & Design Engineer - Valves - Position Overview Sizing valves Taking a lead in design engineering CAD skills The Valves Engineer will lead the design and manufacturing process and support the product development of self acting pressure regulators and pilot operated control valves Using Solid Edge Create and review valve specifications , calculations and data sheets in a heavily regulated industry. Deliver project documentation and specifications with clients and colleagues to ensure quality, functionality and compliance. Selecting and sourcing materials required used in the construction of industrial products Produce and maintain Engineering drawings and bill of materials to allow manufacture of components. Assisting with the implementation of the engineering document and component system Ensuring standards are met Customer Project Management Application Engineering Instrumentation Acting as a pivot between sales and engineering Lead Technical & Design Engineer - Valves Position Requirements Experienced engineer with experience in valves or similar Lead Technical & Design Engineer - Valves Position Remuneration Salary dependent on experience but likely 45k- 55k Flexible hours (core hours 07:00-15:30 but can start later if needed) 37.5 hour week Hybrid work available (2 days working from home a week) Generous holiday Scheme 25 days a year plus 8 statutory days Market leading Pension Scheme Scope to progress within the company On site parking Sick Pay Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, and contact you in relation to this application and the services we offer.
This is an excellent opportunity to join a market leader in their field and be part of an expanding business operating with clients in the automotive, aerospace, defence and commercial vehicle sectors to name a few. The business specialises in the development of sustainable electrified propulsion and actuation systems and the successful candidate will play a key role in the contribution to the end results and development. Qualifications: The successful candidate should be degree qualified in either a mechanical, electrical or control systems engineering or related discipline. Key Responsibilities will include: Application of technical knowledge and experience to provide innovative engineering solutions to meet a variety of customer requirements Use of and proficient in appropriate software related to your engineering background Support Senior technical staff in complex development and test activities Support FMEA reviews Prepare test plans and specifications Specify test rig requirements including instrumentation and fixture tooling Plan and co-ordinate suppliers and external testing Specify and prepare data logging equipment, instrumentation and wiring requirements Supervise technicians with build, test and measurement procedures and supporting documentation Calibrate instrumentation Conduct and provide instructions for testing Running the rigs and test execution Generate test results, analyse data and compile test reports Present and communicate technical and commercial information, clearly and concisely, both internally and to customers Take an active role in the continuous improvement initiatives within the development and test function Where appropriate, undertake a Project Lead role, leading a small project team to deliver a successful project outcome from both a technical and commercial perspective Please note - Candidates should have full eligibility to work in the UK
Apr 25, 2024
Full time
This is an excellent opportunity to join a market leader in their field and be part of an expanding business operating with clients in the automotive, aerospace, defence and commercial vehicle sectors to name a few. The business specialises in the development of sustainable electrified propulsion and actuation systems and the successful candidate will play a key role in the contribution to the end results and development. Qualifications: The successful candidate should be degree qualified in either a mechanical, electrical or control systems engineering or related discipline. Key Responsibilities will include: Application of technical knowledge and experience to provide innovative engineering solutions to meet a variety of customer requirements Use of and proficient in appropriate software related to your engineering background Support Senior technical staff in complex development and test activities Support FMEA reviews Prepare test plans and specifications Specify test rig requirements including instrumentation and fixture tooling Plan and co-ordinate suppliers and external testing Specify and prepare data logging equipment, instrumentation and wiring requirements Supervise technicians with build, test and measurement procedures and supporting documentation Calibrate instrumentation Conduct and provide instructions for testing Running the rigs and test execution Generate test results, analyse data and compile test reports Present and communicate technical and commercial information, clearly and concisely, both internally and to customers Take an active role in the continuous improvement initiatives within the development and test function Where appropriate, undertake a Project Lead role, leading a small project team to deliver a successful project outcome from both a technical and commercial perspective Please note - Candidates should have full eligibility to work in the UK
What Are We Looking For? Blackburn Starling is looking to recruit a Senior System Integration Engineer that will be responsible for the development, commissioning and support of automation and control systems. Blackburn Starling are a specialist business in the MCC and power control sector, and youll be working alongside an established team to deliver control system solutions to the water industry. Some of Your Key Duties Include: The design, specification, programming, simulation and testing of automation and control systems. Developing, troubleshooting, and validating these systems in a compliant manner. Generate documentation and SOPs associated with each of the Automation systems as required. Assist tendering and project teams in the development of manhour budgets and programs for software development and delivery. Trouble shooting of PLC software code for startup and commissioning activities. Manage the production of FDS documentation to support software production and the end user. Design activities will involve: Interfacing with instrumentation and sensors specific for machine and process control. Data capture and validation. Designing and implementing PLC networks. Electrical systems design, detailed hardware component specifications and bill of materials. Programming a range of PLCs, primarily SIEMENS, Mitsubishi, and Allen Bradley. What Do You Need? Degree qualified in Engineering or equivalent, particular emphasis on electrical, mechanical, electronic, automation and/or chemical discipline. A proven background in the design and commissioning of control and electrical systems associated with process automation. Experience with Programmable Logic Controllers (PLCs) and Vision Systems in the process control environment. Experience in one or more of the following: Allen Bradley, SIEMENS, Mitsubishi. HMI and SCADA programming and configuration of the following software packages Wonderware, InTouch, RS View, SIEMENS, Labview, GE Cimplicity. FAT and SATA experience with PLC and Electrical Control Systems. A working knowledge of process systems, P&ID control and loop tuning. Must be flexible and willing to travel. Blackburn Starling Who Are We? Blackburn Starling are known for delivering manufacturing & engineering projects across the UK for over 150 Years at the highest standards of quality. We are a well-established and reputable leading manufacturer of reliable high-quality low voltage assemblies and control systems. Blackburn Starling offers a complete range of maintenance and customer service support programmes tailored to suit our specific customer requirement across the UK. Blackburn is part of the RSE group of companies, operating within the Power Distribution & Controls business stream. RSE is the leading technology partner of choice in the design, build & maintenance of water treatment & water recycling equipment. Delivering products and services to clients across the UK, RSEs unique offering to the market focuses on innovation, efficiency, and excellence. What We Offer To build successful teams and drive the level of quality that we are renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in such an innovative industry.Youll be given every opportunity to set the path of your career through our Business Streams and work in an environment that will require you to rise to the challenge of working for a market leader. Industry-leading salary dependant on experience. Company Car Allowance. A flexible career development path, with no restrictions on where your career can go. A holiday allowance of 25 days plus Bank Holidays. Cycle to Scheme EV/Hybrid Car Lease Scheme Company Pension Scheme. If youre interested in a career with a company that will harness your skills and provides you with the support to create your future, then please apply. JBRP1_UKTJ
Apr 24, 2024
Full time
What Are We Looking For? Blackburn Starling is looking to recruit a Senior System Integration Engineer that will be responsible for the development, commissioning and support of automation and control systems. Blackburn Starling are a specialist business in the MCC and power control sector, and youll be working alongside an established team to deliver control system solutions to the water industry. Some of Your Key Duties Include: The design, specification, programming, simulation and testing of automation and control systems. Developing, troubleshooting, and validating these systems in a compliant manner. Generate documentation and SOPs associated with each of the Automation systems as required. Assist tendering and project teams in the development of manhour budgets and programs for software development and delivery. Trouble shooting of PLC software code for startup and commissioning activities. Manage the production of FDS documentation to support software production and the end user. Design activities will involve: Interfacing with instrumentation and sensors specific for machine and process control. Data capture and validation. Designing and implementing PLC networks. Electrical systems design, detailed hardware component specifications and bill of materials. Programming a range of PLCs, primarily SIEMENS, Mitsubishi, and Allen Bradley. What Do You Need? Degree qualified in Engineering or equivalent, particular emphasis on electrical, mechanical, electronic, automation and/or chemical discipline. A proven background in the design and commissioning of control and electrical systems associated with process automation. Experience with Programmable Logic Controllers (PLCs) and Vision Systems in the process control environment. Experience in one or more of the following: Allen Bradley, SIEMENS, Mitsubishi. HMI and SCADA programming and configuration of the following software packages Wonderware, InTouch, RS View, SIEMENS, Labview, GE Cimplicity. FAT and SATA experience with PLC and Electrical Control Systems. A working knowledge of process systems, P&ID control and loop tuning. Must be flexible and willing to travel. Blackburn Starling Who Are We? Blackburn Starling are known for delivering manufacturing & engineering projects across the UK for over 150 Years at the highest standards of quality. We are a well-established and reputable leading manufacturer of reliable high-quality low voltage assemblies and control systems. Blackburn Starling offers a complete range of maintenance and customer service support programmes tailored to suit our specific customer requirement across the UK. Blackburn is part of the RSE group of companies, operating within the Power Distribution & Controls business stream. RSE is the leading technology partner of choice in the design, build & maintenance of water treatment & water recycling equipment. Delivering products and services to clients across the UK, RSEs unique offering to the market focuses on innovation, efficiency, and excellence. What We Offer To build successful teams and drive the level of quality that we are renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in such an innovative industry.Youll be given every opportunity to set the path of your career through our Business Streams and work in an environment that will require you to rise to the challenge of working for a market leader. Industry-leading salary dependant on experience. Company Car Allowance. A flexible career development path, with no restrictions on where your career can go. A holiday allowance of 25 days plus Bank Holidays. Cycle to Scheme EV/Hybrid Car Lease Scheme Company Pension Scheme. If youre interested in a career with a company that will harness your skills and provides you with the support to create your future, then please apply. JBRP1_UKTJ
Want to join a company with over 30 years of experience in designing, manufacturing, and delivering highly bespoke simulator solutions? Join a reputable business who have a number of awards, most recently been named as an Award winner (Gold Award) in MoD Defence Employer Recognition Scheme! Join a team at an exciting time, at the start of re-defining their systems, with the opportunity to influence and shape the product! Opportunity: The Senior Electronics Engineer will mentor a team of electronics engineers from requirements through to the design, maintenance and installation of systems and products. This role isn't limited to Electronics, as the Technical Manager you will be able to implement your skills and experience across Systems and Software as well. We're looking for a Technical Manager to add their knowledge to other areas on varied projects. Responsibilities: Detailed analysis of existing equipment to establish requirements for replacement or refurbishment Establish customer solutions and support discussions of the proposed solution(s) with customer representatives to agree the optimum outcome in terms of cost, timescale and ease of implementation Liaison with suppliers regarding supply and support of third party equipment Carrying out specified design and development and repair work in own area of competence Occasionally supporting the installation and commissioning of equipment on the customer's site Developing personal engineering capability across the safety system and instrumentation areas Produce technical reports, clearly identifying the preferred course of action and why after the analysis of the legacy designs Drafting concise and accurate technical reports, requirements specifications and drawings as required meeting the specific needs of the deployed equipment Peer review of technical reports, drawings and designs for safety, functionality and compliance with standards and statutory requirements Provide specific technical support to project manager for projects Provide a technical lead in specified areas for the team and the company as a whole To carry out all work ethically, safely and in accordance with the relevant standards and best practice within the nuclear industry Management and planning, performance and discipline, morale and welfare of domain personnel Provide expertise in support of analogue, digital (FPGA) and computer-based safety systems. (Project depending.) Experience needed: Degree educated in Systems Engineering, Software Engineering or Electronics Engineering or demonstrable industry experience in an electronics design role, including schematic design and PCB layout Appropriate technical qualifications in specific areas of electrical or electronic design or in instrumentation and control Experience in managing team workloads, providing mentoring, coaching and leadership to other engineers Ability to communicate effectively within peer group and with manager / team leader Capable of producing good oral and written communications Desirable: Experience in the definition, design prototyping and commissioning of electrical subsystems including PCBs, electronics racks/cabinets, cables and other electronic assemblies Demonstrable ability in electrical work and/or analogue and digital electronics using conventional logic families and programmable logic, including design for EMC Appropriate technical qualifications in specific areas of electrical or electronic design or in instrumentation and control Altium knowledge an advantage Has electronic equipment design or maintenance experience in a regulated industry. Experience in the Defence / Aerospace or safety regulated environment would be advantageous. For full information, please get in touch. JBRP1_UKTJ
Apr 24, 2024
Full time
Want to join a company with over 30 years of experience in designing, manufacturing, and delivering highly bespoke simulator solutions? Join a reputable business who have a number of awards, most recently been named as an Award winner (Gold Award) in MoD Defence Employer Recognition Scheme! Join a team at an exciting time, at the start of re-defining their systems, with the opportunity to influence and shape the product! Opportunity: The Senior Electronics Engineer will mentor a team of electronics engineers from requirements through to the design, maintenance and installation of systems and products. This role isn't limited to Electronics, as the Technical Manager you will be able to implement your skills and experience across Systems and Software as well. We're looking for a Technical Manager to add their knowledge to other areas on varied projects. Responsibilities: Detailed analysis of existing equipment to establish requirements for replacement or refurbishment Establish customer solutions and support discussions of the proposed solution(s) with customer representatives to agree the optimum outcome in terms of cost, timescale and ease of implementation Liaison with suppliers regarding supply and support of third party equipment Carrying out specified design and development and repair work in own area of competence Occasionally supporting the installation and commissioning of equipment on the customer's site Developing personal engineering capability across the safety system and instrumentation areas Produce technical reports, clearly identifying the preferred course of action and why after the analysis of the legacy designs Drafting concise and accurate technical reports, requirements specifications and drawings as required meeting the specific needs of the deployed equipment Peer review of technical reports, drawings and designs for safety, functionality and compliance with standards and statutory requirements Provide specific technical support to project manager for projects Provide a technical lead in specified areas for the team and the company as a whole To carry out all work ethically, safely and in accordance with the relevant standards and best practice within the nuclear industry Management and planning, performance and discipline, morale and welfare of domain personnel Provide expertise in support of analogue, digital (FPGA) and computer-based safety systems. (Project depending.) Experience needed: Degree educated in Systems Engineering, Software Engineering or Electronics Engineering or demonstrable industry experience in an electronics design role, including schematic design and PCB layout Appropriate technical qualifications in specific areas of electrical or electronic design or in instrumentation and control Experience in managing team workloads, providing mentoring, coaching and leadership to other engineers Ability to communicate effectively within peer group and with manager / team leader Capable of producing good oral and written communications Desirable: Experience in the definition, design prototyping and commissioning of electrical subsystems including PCBs, electronics racks/cabinets, cables and other electronic assemblies Demonstrable ability in electrical work and/or analogue and digital electronics using conventional logic families and programmable logic, including design for EMC Appropriate technical qualifications in specific areas of electrical or electronic design or in instrumentation and control Altium knowledge an advantage Has electronic equipment design or maintenance experience in a regulated industry. Experience in the Defence / Aerospace or safety regulated environment would be advantageous. For full information, please get in touch. JBRP1_UKTJ
Job title: Senior Commissioning Engineer-Electrical Power &Distribution Location: Barrow- We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: To carry out routine work with limited supervision & have an understanding of safety consequences in a high risk environment Liaise/Interface with relevant stakeholders i.e Engineering, Royal Navy, MOD and Build Operations to ensure activities are undertaken in a safe & compliant manner Instruct & mentor less experiences members of the team within your knowledge & competency Responsible for researching authoring and reviewing of design and test documentation Keep full and accurate records of work activities carried out as required by policy, procedure & legislation To represent the Company on Factory Acceptance Tests and offsite test facilities, Contractors sea trials and other outworking requirements with scope for overseas travel Responsible for delivering assigned activities in line with Company policy, procedures and legislation Your skills and experiences: Knowledge of AC and DC Electrical Generation and Power distribution systems Understanding of the role and how T&C contributes to the wider business and UK enterprise Knowledge of safety controls & procedures in a high risk environment Aware of Nuclear Site/Authorisation Conditions Experience working with Distribution Systems, Fire Protection Systems and Electrical Testing Knowledge of Instrumentation Systems including; Electrostatic Discharge, Low Voltage Control, Data Communications, PLCs & Fibre Optics Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave allowance and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts you may also be eligible for an annual incentive. The Electrical Commissioning Team: You will be part of the team responsible for commissioning the first of class electrical power and distribution plant, on the first of class, next generation of Dreadnought submarines. The scope of the Dreadnought Programme is the delivery of four SSBNs to the Royal Navy to maintain Continuous At Sea Deterrence (CASD) Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments." Please be aware that many roles working for BAE Systems will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation. Closing Date: 22nd May 2024 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Apr 24, 2024
Full time
Job title: Senior Commissioning Engineer-Electrical Power &Distribution Location: Barrow- We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Competitive What you'll be doing: To carry out routine work with limited supervision & have an understanding of safety consequences in a high risk environment Liaise/Interface with relevant stakeholders i.e Engineering, Royal Navy, MOD and Build Operations to ensure activities are undertaken in a safe & compliant manner Instruct & mentor less experiences members of the team within your knowledge & competency Responsible for researching authoring and reviewing of design and test documentation Keep full and accurate records of work activities carried out as required by policy, procedure & legislation To represent the Company on Factory Acceptance Tests and offsite test facilities, Contractors sea trials and other outworking requirements with scope for overseas travel Responsible for delivering assigned activities in line with Company policy, procedures and legislation Your skills and experiences: Knowledge of AC and DC Electrical Generation and Power distribution systems Understanding of the role and how T&C contributes to the wider business and UK enterprise Knowledge of safety controls & procedures in a high risk environment Aware of Nuclear Site/Authorisation Conditions Experience working with Distribution Systems, Fire Protection Systems and Electrical Testing Knowledge of Instrumentation Systems including; Electrostatic Discharge, Low Voltage Control, Data Communications, PLCs & Fibre Optics Benefits: You'll receive benefits including a competitive pension scheme, enhanced annual leave allowance and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts you may also be eligible for an annual incentive. The Electrical Commissioning Team: You will be part of the team responsible for commissioning the first of class electrical power and distribution plant, on the first of class, next generation of Dreadnought submarines. The scope of the Dreadnought Programme is the delivery of four SSBNs to the Royal Navy to maintain Continuous At Sea Deterrence (CASD) Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome candidates from all backgrounds and particularly from sections of the community who are currently underrepresented within our industry, including women, ethnic minorities, people with disabilities and LGBTQ+ individuals. We also want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments." Please be aware that many roles working for BAE Systems will be subject to both security and export control restrictions. These restrictions mean that factors including your nationality, any previous nationalities you have held, and your place of birth may limit those roles you can perform for the organisation. Closing Date: 22nd May 2024 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Principal Electronics Engineer - £60k - £70k + Bonus - South Bedfordshire A superb career opportunity has arisen for a Principal Electronics Engineer to join a South Bedfordshire SME Electronics manufacture who develop world leading Safety / detection / environmental measurement instrumentation. They have an array of successful products in the market and an exciting backlog of brand-new market disruptive technology waiting to be taken from concept to delivery.This is an integral role within the company and will suit a Senior / Principal Electronics Engineer who enjoys being hands on with electronic and firmware design but also is looking for a role which offers a speedy path into Engineering Management and potentially Technical Directorship. Requirements - Principal Electronics Engineer Recent and relevant experience workings as a Lead Electronics Design Engineer (Hardware and firmware) Strong Project management and project documentation skills. Skilled in Software development in C, ideally C# and Visual Basic as well Good Electronic design skills - Microcontroller integration (STM32, Microchip PIC, NORDIC), peripheral use/integration, analogue circuitry (including switched mode power supplies), appreciation of PCB layout (to brief/direct CAD bureau). Recent and relevant experience in Supervision, management, mentoring, support and evaluation of engineering staff. Appreciation of radio communication beneficial (IEEE 802.15.4, Bluetooth, various Industrial, Scientific and Medical ISM band long range communication modules) Skilled in the creation, management and review of project plans to ensure timely project delivery beneficial. Mechanical design skills beneficial - appreciation of materials and their respective benefits, production options, generation of CAD drawings, third party contractor brief/direction Job Role - Principal Electronics Engineer Vacancy Location - South Bedfordshire ( Commutable from Stevenage, Bedford, Milton Keynes, Hemel Hempstead, Luton, Watford, Letchworth, St Albans, etc) Salary - £60-£75K + benefits + Bonus For more details contact Adam ( ) at Vector Recruitment Ltd, ( )
Apr 23, 2024
Full time
Principal Electronics Engineer - £60k - £70k + Bonus - South Bedfordshire A superb career opportunity has arisen for a Principal Electronics Engineer to join a South Bedfordshire SME Electronics manufacture who develop world leading Safety / detection / environmental measurement instrumentation. They have an array of successful products in the market and an exciting backlog of brand-new market disruptive technology waiting to be taken from concept to delivery.This is an integral role within the company and will suit a Senior / Principal Electronics Engineer who enjoys being hands on with electronic and firmware design but also is looking for a role which offers a speedy path into Engineering Management and potentially Technical Directorship. Requirements - Principal Electronics Engineer Recent and relevant experience workings as a Lead Electronics Design Engineer (Hardware and firmware) Strong Project management and project documentation skills. Skilled in Software development in C, ideally C# and Visual Basic as well Good Electronic design skills - Microcontroller integration (STM32, Microchip PIC, NORDIC), peripheral use/integration, analogue circuitry (including switched mode power supplies), appreciation of PCB layout (to brief/direct CAD bureau). Recent and relevant experience in Supervision, management, mentoring, support and evaluation of engineering staff. Appreciation of radio communication beneficial (IEEE 802.15.4, Bluetooth, various Industrial, Scientific and Medical ISM band long range communication modules) Skilled in the creation, management and review of project plans to ensure timely project delivery beneficial. Mechanical design skills beneficial - appreciation of materials and their respective benefits, production options, generation of CAD drawings, third party contractor brief/direction Job Role - Principal Electronics Engineer Vacancy Location - South Bedfordshire ( Commutable from Stevenage, Bedford, Milton Keynes, Hemel Hempstead, Luton, Watford, Letchworth, St Albans, etc) Salary - £60-£75K + benefits + Bonus For more details contact Adam ( ) at Vector Recruitment Ltd, ( )
Are you an experienced Senior Electronics Engineer skilled in both analogue and digital circuit design? If so, we're looking for someone like you to join our clients growing team in Yateley!Our client is offering a salary up to 65k, 25 days holiday, plus LOADS of benefits including an enhanced pension scheme, Costco membership and a 3:30pm finish on a Friday!Benefits for the Senior Electronics Engineer includes:•Salary of up to 65k •Mon Thurs 08:00am -16:45pm & 15:30pm finish on a Friday!•25 days annual leave plus the 8 bank holidays•Enhanced pension scheme•Group income protection scheme•Group life assurance scheme•Long service rewards •Employee recognition scheme•Well-being and social activities •Cycle to work scheme•EAP structure•Costco Membership •Internal and external development opportunitiesAs the Senior Electronics Engineer you will be:•Leading and contributing to all phases of the product development cycle, from requirement analysis to design & development, prototyping, and production.•Designing and developing mixed signal circuits, including but not limited to preamplifiers, filters, power supplies, interfacing, and analogue-digital conversion•Conducting research and investigation into innovative technologies and methods applicable to our products and services.•Overseeing the safe construction and operation of test rigs, instrumentation, prototypes, and laboratory practices.Who we're looking for:•You must hold a BSc or a higher degree in a relevant electronics-engineering course at a UK University.•Proven experience in analogue and digital circuit design within a product development setting.•Proficient in mixed signal design for precision instrumentation.•Solid understanding and practical experience with microcontroller-based designs and embedded software•Ability to work independently or lead a team through the product development lifecycle.How to Apply:If you are interested in applying for this job please use the link, or give one of our friendly team a call on our Basingstoke office telephone number.If this is not the job for you, but you know someone who might be interested please get in touch and take advantage of our fantastic RECOMMEND A FRIEND' scheme. Call us TODAY for more details.By applying for this role your details will be submitted to Priority Appointments. Our Privacy Policy explains how we will use your information please refer to our website and privacy policy for more details.
Apr 23, 2024
Full time
Are you an experienced Senior Electronics Engineer skilled in both analogue and digital circuit design? If so, we're looking for someone like you to join our clients growing team in Yateley!Our client is offering a salary up to 65k, 25 days holiday, plus LOADS of benefits including an enhanced pension scheme, Costco membership and a 3:30pm finish on a Friday!Benefits for the Senior Electronics Engineer includes:•Salary of up to 65k •Mon Thurs 08:00am -16:45pm & 15:30pm finish on a Friday!•25 days annual leave plus the 8 bank holidays•Enhanced pension scheme•Group income protection scheme•Group life assurance scheme•Long service rewards •Employee recognition scheme•Well-being and social activities •Cycle to work scheme•EAP structure•Costco Membership •Internal and external development opportunitiesAs the Senior Electronics Engineer you will be:•Leading and contributing to all phases of the product development cycle, from requirement analysis to design & development, prototyping, and production.•Designing and developing mixed signal circuits, including but not limited to preamplifiers, filters, power supplies, interfacing, and analogue-digital conversion•Conducting research and investigation into innovative technologies and methods applicable to our products and services.•Overseeing the safe construction and operation of test rigs, instrumentation, prototypes, and laboratory practices.Who we're looking for:•You must hold a BSc or a higher degree in a relevant electronics-engineering course at a UK University.•Proven experience in analogue and digital circuit design within a product development setting.•Proficient in mixed signal design for precision instrumentation.•Solid understanding and practical experience with microcontroller-based designs and embedded software•Ability to work independently or lead a team through the product development lifecycle.How to Apply:If you are interested in applying for this job please use the link, or give one of our friendly team a call on our Basingstoke office telephone number.If this is not the job for you, but you know someone who might be interested please get in touch and take advantage of our fantastic RECOMMEND A FRIEND' scheme. Call us TODAY for more details.By applying for this role your details will be submitted to Priority Appointments. Our Privacy Policy explains how we will use your information please refer to our website and privacy policy for more details.
Bennett and Game Recruitment LTD
Leigh, Lancashire
Senior BMS Service and Commissioning Engineer required. Our client is one of the largest Controls Systems Houses in the North West of England and offers a wide range of market leading products that will provide engineered solutions for the control of services within any building environment. They Deliver new build and long-term maintenance contracts including the installation of smart controls to manage lighting, heating, refrigeration and other specialist energy consuming equipment. They are now looking for a Senior BMS Service and Commissioning Engineer due to the growth of the business. This role is predominately in the North West of England. Senior BMS Service and Commissioning Engineer Position Overview Servicing and maintaining existing BMS systems and identify and correct any faults or irregularities. Identify and action opportunities for upgrades or improvements to the customer's system. Ensure that new-build projects are delivered on scope and on time including the final commissioning, demonstration to the customer and handover. Fully conversant with and able to program a BMS system from conception. Demonstrate self-management, project management and innovation skills. Senior BMS Service and Commissioning Engineer Position Requirements 5+ years' experience of Trend, Tridium or Siemens BMS systems. To have an excellent understanding of control panel design and to be able to modify panels. Excellent knowledge of instrumentation and integration of BMS systems with 3rd party systems Ability to modify strategies and experience of front-end graphics A full clean driving licence is preferred Senior BMS Service and Commissioning Engineer Position Remuneration £30,000 - £45,000 DOE 00am to 5pm Monday to Thursday and 8.00am to 3.45pm Friday. 40 hour working week Company Van / Car Allowance Holiday Package: 25 days + 8BH Pension Death In Service Company Benefits Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, and contact you in relation to this application and the services we offer. JBRP1_UKTJ
Apr 23, 2024
Full time
Senior BMS Service and Commissioning Engineer required. Our client is one of the largest Controls Systems Houses in the North West of England and offers a wide range of market leading products that will provide engineered solutions for the control of services within any building environment. They Deliver new build and long-term maintenance contracts including the installation of smart controls to manage lighting, heating, refrigeration and other specialist energy consuming equipment. They are now looking for a Senior BMS Service and Commissioning Engineer due to the growth of the business. This role is predominately in the North West of England. Senior BMS Service and Commissioning Engineer Position Overview Servicing and maintaining existing BMS systems and identify and correct any faults or irregularities. Identify and action opportunities for upgrades or improvements to the customer's system. Ensure that new-build projects are delivered on scope and on time including the final commissioning, demonstration to the customer and handover. Fully conversant with and able to program a BMS system from conception. Demonstrate self-management, project management and innovation skills. Senior BMS Service and Commissioning Engineer Position Requirements 5+ years' experience of Trend, Tridium or Siemens BMS systems. To have an excellent understanding of control panel design and to be able to modify panels. Excellent knowledge of instrumentation and integration of BMS systems with 3rd party systems Ability to modify strategies and experience of front-end graphics A full clean driving licence is preferred Senior BMS Service and Commissioning Engineer Position Remuneration £30,000 - £45,000 DOE 00am to 5pm Monday to Thursday and 8.00am to 3.45pm Friday. 40 hour working week Company Van / Car Allowance Holiday Package: 25 days + 8BH Pension Death In Service Company Benefits Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, and contact you in relation to this application and the services we offer. JBRP1_UKTJ
Due to an increase in workload and successful contract awards, we are looking to strengthen our team with the following positions: Electrical Site / Contract Managers - Customer facing, experienced in leading team of site electricians, good planning and organisational skills, capable of producing management reports, generating quotes and accurately pricing electrical site work. Predominantly based locally, but must be prepared to work away from home as required to suit the business needs. - Staff or contract position. Electrical Controls & Instrumentation Engineers - Both senior & junior positions considered, ideally time-served, must have a "can-do", proactive attitude to work, experienced in producing design documentation such as block diagrams, single line diagrams, schematics, GA's, cable routing drawings and cable schedules, system hardware design is essential, software design and commissioning experience would be beneficial. Predominantly based locally, but must be prepared to work away from home as required to suit the business needs. - Staff position. Electrical Technicians - Experienced electrical installation technicians, must be team players with a "can-do" attitude with experience of working in an industrial setting is a must. CompEx and panel building experience would be a distinct advantage. Predominantly based locally, but must be prepared to work away from home as required to suit the business needs. - Staff or contract position, ideally staff. The ideal candidate will have the following qualifications and experience but not essential: Engineer / Manager Diserable Qualifications: HNC Electrical Engineering minimum Experience: Ideally apprentice trained / electrical technician background. 3 years Electrical design experience minimum. ATEX experience. Instrument and controls design experience would be beneficial.
Apr 23, 2024
Full time
Due to an increase in workload and successful contract awards, we are looking to strengthen our team with the following positions: Electrical Site / Contract Managers - Customer facing, experienced in leading team of site electricians, good planning and organisational skills, capable of producing management reports, generating quotes and accurately pricing electrical site work. Predominantly based locally, but must be prepared to work away from home as required to suit the business needs. - Staff or contract position. Electrical Controls & Instrumentation Engineers - Both senior & junior positions considered, ideally time-served, must have a "can-do", proactive attitude to work, experienced in producing design documentation such as block diagrams, single line diagrams, schematics, GA's, cable routing drawings and cable schedules, system hardware design is essential, software design and commissioning experience would be beneficial. Predominantly based locally, but must be prepared to work away from home as required to suit the business needs. - Staff position. Electrical Technicians - Experienced electrical installation technicians, must be team players with a "can-do" attitude with experience of working in an industrial setting is a must. CompEx and panel building experience would be a distinct advantage. Predominantly based locally, but must be prepared to work away from home as required to suit the business needs. - Staff or contract position, ideally staff. The ideal candidate will have the following qualifications and experience but not essential: Engineer / Manager Diserable Qualifications: HNC Electrical Engineering minimum Experience: Ideally apprentice trained / electrical technician background. 3 years Electrical design experience minimum. ATEX experience. Instrument and controls design experience would be beneficial.
Chroma are working with a nationally recognised specialist process equipment and instrumentation package provider, who are searching for an EC&I Design Engineer Contractor to join their team due to investments increasing the scale of their projects. Role Specifics: Outside IR35 Hybrid Working Senior level Position Cradle to Grave projects Up to £45p/h 12 Months (Likely extensions) Chester area We're look click apply for full job details
Apr 23, 2024
Contractor
Chroma are working with a nationally recognised specialist process equipment and instrumentation package provider, who are searching for an EC&I Design Engineer Contractor to join their team due to investments increasing the scale of their projects. Role Specifics: Outside IR35 Hybrid Working Senior level Position Cradle to Grave projects Up to £45p/h 12 Months (Likely extensions) Chester area We're look click apply for full job details
TOTAL TECHNOLOGY (ENGINEERING) LIMITED
Southampton, Hampshire
Salary: £68k inc. shift allowance Hours: 12 hr shifts 7 to 7 Location: Southampton Benefits: Health care, company pension, etc. Duration: Permanent A world-leading industrial gases and engineering company require a Shift Manager at their top tier COMAH site near Southampton. Reporting to the Plant Manager you will be responsible for the supervision & control of staff at the production plant to ensure pipeline tonnage / customer demands are met. Key responsibilities include: Supervise, monitor, and control plant operations to meet quality and operational requirements in the most efficient manner. Taking responsibility for identifying and resolving operational problems of any nature. Control and supervise contractor personnel in accordance with site rules and regulations andpermit to work requirements. Acts as Senior Person on Site for on and off-site emergencies and implement site Emergency Plans as required. Lead and manage a shift team and maintain good relationships with all site personnel. Maintaining high standards of housekeeping whilst contributing to the site safety management system. Ensure all site operations are carried out safely, and in accordance with the company and statutory operating and safety standards. Out of hours be responsible for the site on behalf of the management team. Contribute fully to all site and business quality, safety, and environmental initiatives. Requirements: Suitable candidates ideally will be educated to HNC or apprenticed mechanical background. Experience of shift team working on a process plant in a position of some responsibility. Detailed knowledge of Permit to Work procedures and relevant emergency plans. Top tier COMAH site experience. Instrumentation background is ideal. A broad knowledge of Air Separation operation or similar plant is desirable. Operating experience of hydrogen plant reformers, carbon monoxide installations and associated equipment (an advantage). You will need to have a sound knowledge of systems and procedures, including Operations and Engineering Standards, the SAP maintenance, purchasing and reporting system. Proficiency in the production of regular management reports and the ability to own and manage issues of an inter-disciplinary nature will be important attributes. You must have a high level of personal Integrity. For more information on this fantastic opportunity please call and speak to a member of our team at Totec or send your CV to Totec Recruitment today. JBRP1_UKTJ
Apr 23, 2024
Full time
Salary: £68k inc. shift allowance Hours: 12 hr shifts 7 to 7 Location: Southampton Benefits: Health care, company pension, etc. Duration: Permanent A world-leading industrial gases and engineering company require a Shift Manager at their top tier COMAH site near Southampton. Reporting to the Plant Manager you will be responsible for the supervision & control of staff at the production plant to ensure pipeline tonnage / customer demands are met. Key responsibilities include: Supervise, monitor, and control plant operations to meet quality and operational requirements in the most efficient manner. Taking responsibility for identifying and resolving operational problems of any nature. Control and supervise contractor personnel in accordance with site rules and regulations andpermit to work requirements. Acts as Senior Person on Site for on and off-site emergencies and implement site Emergency Plans as required. Lead and manage a shift team and maintain good relationships with all site personnel. Maintaining high standards of housekeeping whilst contributing to the site safety management system. Ensure all site operations are carried out safely, and in accordance with the company and statutory operating and safety standards. Out of hours be responsible for the site on behalf of the management team. Contribute fully to all site and business quality, safety, and environmental initiatives. Requirements: Suitable candidates ideally will be educated to HNC or apprenticed mechanical background. Experience of shift team working on a process plant in a position of some responsibility. Detailed knowledge of Permit to Work procedures and relevant emergency plans. Top tier COMAH site experience. Instrumentation background is ideal. A broad knowledge of Air Separation operation or similar plant is desirable. Operating experience of hydrogen plant reformers, carbon monoxide installations and associated equipment (an advantage). You will need to have a sound knowledge of systems and procedures, including Operations and Engineering Standards, the SAP maintenance, purchasing and reporting system. Proficiency in the production of regular management reports and the ability to own and manage issues of an inter-disciplinary nature will be important attributes. You must have a high level of personal Integrity. For more information on this fantastic opportunity please call and speak to a member of our team at Totec or send your CV to Totec Recruitment today. JBRP1_UKTJ
Senior/Principal Hardware/Electrical Engineer Location: Lincoln UK A Snapshot of Your Day We're currently looking to add a Senior/Principal Hardware/Electrical Engineer to our Engineering team at Siemens Energy Gas and Power Services based in Lincoln. Working as part of the Engineering team you will be responsible for the design and development of Turbine and Auxiliary Control Panel hardware and Turbine Package electrical systems for Siemens Energy Gas and Power Services How You'll Make an Impact What are my responsibilities? Developing solutions to replace obsolete equipment/parts to be able to maintain the businesses' fleet of gas turbines To convert these solutions into generic replacement kits/parts for retrofitting Designing/constructing new hardware solutions to replace obsolete Turbine controls system or upgrade current terms Constructing new hardware solutions to replace obsolete auxiliary controls system eg Generator Control Panels: Motor Control Centres: Power within Gas Explosive atmospheres Support sales by supplying detailed quotes for engineering times, potential hardware requirements, possible engineering solutions with regards to customer enquires What You Bring A degree or equivalent professionally accredited or recognised in an engineering subject area preferably relating to the fields of Controls, Electrical, Electronics, Instrumentation, and Software. Working experience with hardware design CAD tools Promise-e and Microstation. Knowledge of change/configuration management tools and processes, as well as experience with other IT related tools and software for business analytics and project management. Working experience of IEC60079 Explosive atmospheres Part 14: Electrical Installation design and selection would be beneficial. Experience of working with gas turbine technology or similar industrial products for Oil & Gas or Energy industry would be advantageous, but experience from other industries with transferrable skills could also be considered. Practitioner of a Systems Engineering approach to product improvement is highly desirable. With a broad spectrum of innovative products and services, we are the top tier service partner for ensuring high reliability and efficient performance of rotating power equipment within the wind, utility, oil & gas, and industrial processing industries worldwide. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Find out more Who is Siemens Energy? Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 1 50-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Our Commitment to Diversity Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion and our combined creative energy is fueled by over 1 30 nationalities. Siemens Energy celebrates character no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences. Rewards/Benefits We offer options to work flexibly, especially after successful onboarding whether it be working remotely, flexible working hours or a combination of both Working with a distributed team Opportunities to work on and lead a variety of innovative projects Encouraging work culture Flexible benefits Life insurance and Pension Fund (PPE) JBRP1_UKTJ
Apr 23, 2024
Full time
Senior/Principal Hardware/Electrical Engineer Location: Lincoln UK A Snapshot of Your Day We're currently looking to add a Senior/Principal Hardware/Electrical Engineer to our Engineering team at Siemens Energy Gas and Power Services based in Lincoln. Working as part of the Engineering team you will be responsible for the design and development of Turbine and Auxiliary Control Panel hardware and Turbine Package electrical systems for Siemens Energy Gas and Power Services How You'll Make an Impact What are my responsibilities? Developing solutions to replace obsolete equipment/parts to be able to maintain the businesses' fleet of gas turbines To convert these solutions into generic replacement kits/parts for retrofitting Designing/constructing new hardware solutions to replace obsolete Turbine controls system or upgrade current terms Constructing new hardware solutions to replace obsolete auxiliary controls system eg Generator Control Panels: Motor Control Centres: Power within Gas Explosive atmospheres Support sales by supplying detailed quotes for engineering times, potential hardware requirements, possible engineering solutions with regards to customer enquires What You Bring A degree or equivalent professionally accredited or recognised in an engineering subject area preferably relating to the fields of Controls, Electrical, Electronics, Instrumentation, and Software. Working experience with hardware design CAD tools Promise-e and Microstation. Knowledge of change/configuration management tools and processes, as well as experience with other IT related tools and software for business analytics and project management. Working experience of IEC60079 Explosive atmospheres Part 14: Electrical Installation design and selection would be beneficial. Experience of working with gas turbine technology or similar industrial products for Oil & Gas or Energy industry would be advantageous, but experience from other industries with transferrable skills could also be considered. Practitioner of a Systems Engineering approach to product improvement is highly desirable. With a broad spectrum of innovative products and services, we are the top tier service partner for ensuring high reliability and efficient performance of rotating power equipment within the wind, utility, oil & gas, and industrial processing industries worldwide. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Find out more Who is Siemens Energy? Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 1 50-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Our Commitment to Diversity Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion and our combined creative energy is fueled by over 1 30 nationalities. Siemens Energy celebrates character no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences. Rewards/Benefits We offer options to work flexibly, especially after successful onboarding whether it be working remotely, flexible working hours or a combination of both Working with a distributed team Opportunities to work on and lead a variety of innovative projects Encouraging work culture Flexible benefits Life insurance and Pension Fund (PPE) JBRP1_UKTJ
We are currently seeking an Engineering Manager to join the Major Projects team within our Nuclear & Power EMEA business reporting to the Head of Engineering Delivery. The successful candidate will have a strong engineering background and will support with resource planning, recruitment, and capability development plans for our teams to ensure we can deliver our portfolio of work. You will be required to manage technical projects with a team of engineers involved in multi-disciplinary tasks and interfacing with other construction related disciplines. You will lead an exciting portfolio of work and future opportunities to develop and expand that team to deliver on our major project's portfolio. We continually invest in our people, technology and working facilities to ensure that we strengthen and grow our current capabilities as well as develop new capabilities. This allows us to deliver projects using industry leading and innovative techniques, such as utilising our growing technology solutions and digital capabilities and showing that our solutions work virtual demonstration. Equality, diversity & inclusion Atkins Careers UK & Europe () The Role: Candidates should be able to act as Engineering Manager to oversee the creation and delivery of high-quality engineering solutions in accordance with our Sector Management System and deliver this aligned to internal gated processes and procedures. Using your technical experience, you'll be able to identify and manage technical risk throughout the project lifecycle. This includes multi-discipline design and substantiation tasks and projects for new facilities, equipment, machinery and infrastructure, adaption and refurbishment of existing facilities and infrastructure, as well as condition assessment and substantiation of structures, systems, machines, and components. You will be able to manage an engineering delivery team which leverages our capability, technology & products to yield innovative solutions, and capture learning and continual improvements in supporting documentation, such as case studies and capability statements. You will be able to negotiate with internal stakeholders and the supply chain to develop requirements and ensure that projects start with right Engineering mindset. This will include overseeing a team of engineers, managing competency requirements and continuous assessments of the team to ensure continuous improvement. The Individual: You will have a strong background in Engineering, having led engineering tasks and projects integrating multi-disciplinary delivery including mechanical, civil, electrical and control & instrumentation. You should have experience and a level of expertise in highly regulated sectors working with engineering design and substantiation with a good knowledge of UK and International design codes and industry regulations. You should have the ability, want and drive to sell AtkinsRéalis as a successful partner and supplier through our reputation for technical excellence and quality of delivery in engineering disciplines relevant to the market, manage and guide varied bid teams in our market and collaborate with colleagues across the wider business, and be keen to utilise our Global Technology Centre and supply chain to offer competitive advantage and quality. Ability to manage and motivate a team and demonstrate good leadership qualities. Self-motivated and able to work both single-handedly as well as within a larger multi-discipline team. Excellent team player, able to collaborate effectively with market colleagues, other wider-business colleagues, and the management team. Be a passionate supporter of our Global Technology Centre and supply chain to offer competitive advantage and quality. How will you contribute to the team: An Innovator - You will encourage people to experiment, produce new ideas and question others to think differently. You'll create space for people to think about potential new innovative approaches, providing an opportunity for growth. An Improver - You spend time on making the process of bid creation more efficient, optimising your resources, and adjusting things to be lean. Comprehensive understanding of supporting design disciplines such as Nuclear Safety Engineering, Environmental, Human Factors, Sustainability and Net Zero Carbon. Fully integrated with counterparts in other parts of the business and involved in identifying cross-application of skills. Proactive at identifying and implementing improvements and cross-business learning. Why work for Atkins Réalis ? The UK is the first major economy to legislate for a Net Zero target by 2050. To achieve this, our nuclear and clean energy teams are ensuring a mix of secure and sustainable energies that can meet our industry and lifestyle demands today, and in 30 years' time. We help to power our world through exciting new technologies and intelligent cybersecurity systems on projects that vary greatly in size, scope, and scale. So, you'll be creating the right safe and resilient systems across nuclear power, renewables, decarbonisation development, new builds and energy efficiency. Read more about our Vision for Women. Meeting your needs: When you start with us, you'll enjoy "Total Reward," a package that can be tailored to your lifestyle, career and personal needs. From flexible holidays to life assurance, health & wellbeing benefits, and career planning for the senior stage of your career. Making sure you're supported is important to us. So, if you identify as having a disability, tell us ahead of your interview. And let's talk about any adjustments you might need. New name, new era. We are AtkinsRéalis. It will take some time for all our information to update - you can still refer to our fantastic benefits via the link below: YourReward at SNC-Lavalin () . More about us: AtkinsRéalis is a leading global consultancy with over 100 years of design and engineering expertise. With us, you'll be surrounded by the skills, knowledge and support to help you succeed. Together, we can deliver projects which have a positive, sustainable impact on the world. AtkinsRéalis Latest Projects Articles () Additional Information: This role may require security clearance and offers of employment will be dependent on obtaining the relevant level of clearance. If this is necessary, it will be discussed with you at interview. The vetting process is delivered by United Kingdom Security Vetting (UKSV) and may require candidates to provide proof of residency in the UK of 5 years or longer. If applying to this role please do not make reference to (in conversation) or include in your application or CV, details of any current or previously held security clearance. We are committed to promoting a diverse and inclusive community - a place where we can all be ourselves, thrive and develop. To help embed inclusion for all, from day one, we offer a range of family friendly, inclusive employment policies, flexible working arrangements and employee networks to support staff from different backgrounds. As an Equal Opportunities Employer, we value applications from all backgrounds, cultures and ability.
Apr 22, 2024
Full time
We are currently seeking an Engineering Manager to join the Major Projects team within our Nuclear & Power EMEA business reporting to the Head of Engineering Delivery. The successful candidate will have a strong engineering background and will support with resource planning, recruitment, and capability development plans for our teams to ensure we can deliver our portfolio of work. You will be required to manage technical projects with a team of engineers involved in multi-disciplinary tasks and interfacing with other construction related disciplines. You will lead an exciting portfolio of work and future opportunities to develop and expand that team to deliver on our major project's portfolio. We continually invest in our people, technology and working facilities to ensure that we strengthen and grow our current capabilities as well as develop new capabilities. This allows us to deliver projects using industry leading and innovative techniques, such as utilising our growing technology solutions and digital capabilities and showing that our solutions work virtual demonstration. Equality, diversity & inclusion Atkins Careers UK & Europe () The Role: Candidates should be able to act as Engineering Manager to oversee the creation and delivery of high-quality engineering solutions in accordance with our Sector Management System and deliver this aligned to internal gated processes and procedures. Using your technical experience, you'll be able to identify and manage technical risk throughout the project lifecycle. This includes multi-discipline design and substantiation tasks and projects for new facilities, equipment, machinery and infrastructure, adaption and refurbishment of existing facilities and infrastructure, as well as condition assessment and substantiation of structures, systems, machines, and components. You will be able to manage an engineering delivery team which leverages our capability, technology & products to yield innovative solutions, and capture learning and continual improvements in supporting documentation, such as case studies and capability statements. You will be able to negotiate with internal stakeholders and the supply chain to develop requirements and ensure that projects start with right Engineering mindset. This will include overseeing a team of engineers, managing competency requirements and continuous assessments of the team to ensure continuous improvement. The Individual: You will have a strong background in Engineering, having led engineering tasks and projects integrating multi-disciplinary delivery including mechanical, civil, electrical and control & instrumentation. You should have experience and a level of expertise in highly regulated sectors working with engineering design and substantiation with a good knowledge of UK and International design codes and industry regulations. You should have the ability, want and drive to sell AtkinsRéalis as a successful partner and supplier through our reputation for technical excellence and quality of delivery in engineering disciplines relevant to the market, manage and guide varied bid teams in our market and collaborate with colleagues across the wider business, and be keen to utilise our Global Technology Centre and supply chain to offer competitive advantage and quality. Ability to manage and motivate a team and demonstrate good leadership qualities. Self-motivated and able to work both single-handedly as well as within a larger multi-discipline team. Excellent team player, able to collaborate effectively with market colleagues, other wider-business colleagues, and the management team. Be a passionate supporter of our Global Technology Centre and supply chain to offer competitive advantage and quality. How will you contribute to the team: An Innovator - You will encourage people to experiment, produce new ideas and question others to think differently. You'll create space for people to think about potential new innovative approaches, providing an opportunity for growth. An Improver - You spend time on making the process of bid creation more efficient, optimising your resources, and adjusting things to be lean. Comprehensive understanding of supporting design disciplines such as Nuclear Safety Engineering, Environmental, Human Factors, Sustainability and Net Zero Carbon. Fully integrated with counterparts in other parts of the business and involved in identifying cross-application of skills. Proactive at identifying and implementing improvements and cross-business learning. Why work for Atkins Réalis ? The UK is the first major economy to legislate for a Net Zero target by 2050. To achieve this, our nuclear and clean energy teams are ensuring a mix of secure and sustainable energies that can meet our industry and lifestyle demands today, and in 30 years' time. We help to power our world through exciting new technologies and intelligent cybersecurity systems on projects that vary greatly in size, scope, and scale. So, you'll be creating the right safe and resilient systems across nuclear power, renewables, decarbonisation development, new builds and energy efficiency. Read more about our Vision for Women. Meeting your needs: When you start with us, you'll enjoy "Total Reward," a package that can be tailored to your lifestyle, career and personal needs. From flexible holidays to life assurance, health & wellbeing benefits, and career planning for the senior stage of your career. Making sure you're supported is important to us. So, if you identify as having a disability, tell us ahead of your interview. And let's talk about any adjustments you might need. New name, new era. We are AtkinsRéalis. It will take some time for all our information to update - you can still refer to our fantastic benefits via the link below: YourReward at SNC-Lavalin () . More about us: AtkinsRéalis is a leading global consultancy with over 100 years of design and engineering expertise. With us, you'll be surrounded by the skills, knowledge and support to help you succeed. Together, we can deliver projects which have a positive, sustainable impact on the world. AtkinsRéalis Latest Projects Articles () Additional Information: This role may require security clearance and offers of employment will be dependent on obtaining the relevant level of clearance. If this is necessary, it will be discussed with you at interview. The vetting process is delivered by United Kingdom Security Vetting (UKSV) and may require candidates to provide proof of residency in the UK of 5 years or longer. If applying to this role please do not make reference to (in conversation) or include in your application or CV, details of any current or previously held security clearance. We are committed to promoting a diverse and inclusive community - a place where we can all be ourselves, thrive and develop. To help embed inclusion for all, from day one, we offer a range of family friendly, inclusive employment policies, flexible working arrangements and employee networks to support staff from different backgrounds. As an Equal Opportunities Employer, we value applications from all backgrounds, cultures and ability.
Senior Control & Instrumentation Engineer "Job Details" London, London, United Kingdom and 1 more Job Identification 5170 Locations Posting Date 04/15/2024, 02:41 PM Apply Before 05/01/2024, 02:41 PM Job Description About Us At Technip Energies, we believe in a better tomorrow and we believe we can make tomorrow better. With approximately 15,000 talented women and men, we are a global and leading engineering and technology company, with a clear vision to accelerate the energy transition. Designing and delivering added value energy solutions is what we do. Genesis is a global business unit of Technip Energies, providing impartial consulting services to its clients in traditional hydrocarbon and the energy industries. We have an unrivalled track record of bringing high-impact solutions to clients. Our mission is to be a trusted advisor on the journey to a sustainable future. We're problem solvers who are at the forefront of innovation and our world-class experience, individual expertise and collective wisdom is what differentiates Genesis in today's market. From Engineers and Specialists to Project Managers and Support Staff, spread across 13 countries, our people thrive in a dynamic, proactive business that's balanced with a deep sense of environmental responsibility. Never standing still, we see limitless possibilities for our solutions; and our knowledge sharing, collaboration and innovative thinking are just a few of the ways we fuel our energy for what we do. If you share our determination to drive the transition to a low-carbon future, then this could be the job for you. We offer you not only a job, but an inspiring journey in a truly global environment where you team up to break down boundaries thanks to the innovation, creativity and pioneer spirit which drive our people. What we are looking for An opportunity is available for a Control & Instrumentation Engineer to join the Genesis UK Project and Discipline Engineering Delivery Team, located in either our Aberdeen or London office locations. Are you early in your career looking to accelerate and expand your professional development whilst making key contributions to early-phase study delivery for major energy transition and conventional energy development projects? Do you enjoy a fast-paced one-team working environment and developing fresh approaches to new challenges? Are you a critical thinker driven to make high-value contributions to key project decision-making? If so, then we would love to hear from you! The role is open to those early in their engineering career looking to further their career development and expand their knowledge and expertise across a number of key markets. You would become a key member of the C&I delivery group supporting the existing team and leading engineer to deliver C&I input to early phase multi-discipline consultancy studies. You will work across a broad and diverse range of studies for our extensive client base. In addition to multi-discipline study input, there will be opportunities to develop further skills in C&I-focused studies, including Functional Safety, Alarm Management, and Telecommunications as well as supporting Genesis in further developing an understanding of C&I considerations for our ever-growing Energy Transition studies. The position requires a critical and forward-thinking engineer who is happy to take on new challenges with the support of the discipline lead to develop and challenge control and instrumentation concepts working with the latest technology. In return, the position will provide the opportunity to join a growing successful and dynamic team and will present significant opportunities for professional and personal growth, working in Hydrogen Generation, Carbon Capture, Energy Transition, lower carbon energy delivery as well as traditional oil and gas related work. Genesis globally is managed within core services lines (Early Advisory Solutions, Development Solutions and Asset Lifecycle Solutions) and key markets (Low Carbon & CO2 management, Upstream, Downstream, and Renewables and power to X). The Genesis UK Operating Centre (with offices in Aberdeen and London) is organised into core delivery teams providing advisory services globally across these services and markets. You will join the UK Project and Discipline Engineering delivery team, currently comprising circa 50+; engineers, project engineers and study managers, managed in six core discipline study teams comprising; Project Engineering and Operations / Piping, Mechanical and Construction / Electrical / Control, Instrumentation & Telecommunications / Structural, Civil and Marine / Decommissioning . We are looking for someone who will: Key responsibilities of the role require early career Control and Instrumentation Engineering project lifecycle knowledge and will include: Participating in all C&I discipline activities including preparation and checking of documents, philosophies, specifications, procedures, standards, data sheets etc.; Contribute to front-end multi-discipline engineering studies, providing key control and instrumentation input; Brownfield cost estimation for C&I activities; Carry out varied C&I engineering studies as per client scope of work; Participating in safety studies (HAZOP, LOPA etc.); Ensuring instrument, control and telecom discipline design is performed in compliance with project requirements and satisfies all relevant safety and quality standards; Preparation, in conjunction with other disciplines, control and safeguarding philosophies and specifications. Requirements: We'd love to hear from you if you can demonstrate: Degree Qualified in relevant engineering subject; Previous early career experience working as a Control and Instrumentation Engineer; Excellent communication skills and full command of English language (written & spoken); Good broad computer literacy with competence in MS Office applications; Previous experience working in Concept Engineering (Front End / FEED) is an advantage; Working towards Chartered Engineer status is an advantage; North Sea, Oil and Gas Experience is an advantage; Experience in Energy Transition and/or low-carbon energy delivery is an advantage; Functional Safety Experience is an advantage; Alarm Rationalisation Experience is an advantage; Concept Engineering (Front End / FEED) is an advantage; Current offshore survival and medical certificates are an advantage. It is essential that applicants have the right to work in the United Kingdom. We invite you to learn more about our company by visiting and following us on LinkedIn for company updates. "As an equal opportunity employer Technip Energies considers only qualified applicants without regard to colour, age, race, ethnicity, sexual orientation, gender expression, disability, national origin, veteran or marital status." An opportunity is available for a Control & Instrumentation Engineer to join the Genesis UK Project and Discipline Engineering Delivery Team, located in either our Aberdeen or London office locations. The role is open to those early in their engineering career looking to further their career development and expand their knowledge and expertise across a number of key markets. You would become a key member of the C&I delivery group supporting the existing team and leading engineer to deliver C&I input to early phase multi-discipline consultancy studies. You will work across a broad and diverse range of studies for our extensive client base. We are seeking a Senior Process Engineer, who will support a wide range of clients on varied and interesting projects related to the energy industry . You will also interface with the wider Genesis organisation through interactions with other discipline teams and a range of clients in the UK and overseas. You will have the opportunity to work in related engineering disciplines based on your career interests, as you work towards Chartered Engineer status. We are currently seeking a Senior Pipeline Engineer to provide input and expertise in the design of subsea pipeline systems at all phases through the design of a system. This will include the execution and delivery of the design of subsea pipelines, risers and tie-in spools in both traditional oil and gas projects as well as Energy Transition such as CCUS, Hydrogen etc. We are currently seeking a Senior Process Engineer to join the UK Process Department. Genesis Process team is a dynamic group working across a range of assignments from traditional upstream oil and gas developments to emerging energy transition technologies. Our work encompasses feasibility assessments and concept selection for new developments through to technical support of mature assets. At Genesis we work in close collaboration with our clients, develop an understanding of their problems before identifying the possible solutions and supporting their decision making process.
Apr 19, 2024
Full time
Senior Control & Instrumentation Engineer "Job Details" London, London, United Kingdom and 1 more Job Identification 5170 Locations Posting Date 04/15/2024, 02:41 PM Apply Before 05/01/2024, 02:41 PM Job Description About Us At Technip Energies, we believe in a better tomorrow and we believe we can make tomorrow better. With approximately 15,000 talented women and men, we are a global and leading engineering and technology company, with a clear vision to accelerate the energy transition. Designing and delivering added value energy solutions is what we do. Genesis is a global business unit of Technip Energies, providing impartial consulting services to its clients in traditional hydrocarbon and the energy industries. We have an unrivalled track record of bringing high-impact solutions to clients. Our mission is to be a trusted advisor on the journey to a sustainable future. We're problem solvers who are at the forefront of innovation and our world-class experience, individual expertise and collective wisdom is what differentiates Genesis in today's market. From Engineers and Specialists to Project Managers and Support Staff, spread across 13 countries, our people thrive in a dynamic, proactive business that's balanced with a deep sense of environmental responsibility. Never standing still, we see limitless possibilities for our solutions; and our knowledge sharing, collaboration and innovative thinking are just a few of the ways we fuel our energy for what we do. If you share our determination to drive the transition to a low-carbon future, then this could be the job for you. We offer you not only a job, but an inspiring journey in a truly global environment where you team up to break down boundaries thanks to the innovation, creativity and pioneer spirit which drive our people. What we are looking for An opportunity is available for a Control & Instrumentation Engineer to join the Genesis UK Project and Discipline Engineering Delivery Team, located in either our Aberdeen or London office locations. Are you early in your career looking to accelerate and expand your professional development whilst making key contributions to early-phase study delivery for major energy transition and conventional energy development projects? Do you enjoy a fast-paced one-team working environment and developing fresh approaches to new challenges? Are you a critical thinker driven to make high-value contributions to key project decision-making? If so, then we would love to hear from you! The role is open to those early in their engineering career looking to further their career development and expand their knowledge and expertise across a number of key markets. You would become a key member of the C&I delivery group supporting the existing team and leading engineer to deliver C&I input to early phase multi-discipline consultancy studies. You will work across a broad and diverse range of studies for our extensive client base. In addition to multi-discipline study input, there will be opportunities to develop further skills in C&I-focused studies, including Functional Safety, Alarm Management, and Telecommunications as well as supporting Genesis in further developing an understanding of C&I considerations for our ever-growing Energy Transition studies. The position requires a critical and forward-thinking engineer who is happy to take on new challenges with the support of the discipline lead to develop and challenge control and instrumentation concepts working with the latest technology. In return, the position will provide the opportunity to join a growing successful and dynamic team and will present significant opportunities for professional and personal growth, working in Hydrogen Generation, Carbon Capture, Energy Transition, lower carbon energy delivery as well as traditional oil and gas related work. Genesis globally is managed within core services lines (Early Advisory Solutions, Development Solutions and Asset Lifecycle Solutions) and key markets (Low Carbon & CO2 management, Upstream, Downstream, and Renewables and power to X). The Genesis UK Operating Centre (with offices in Aberdeen and London) is organised into core delivery teams providing advisory services globally across these services and markets. You will join the UK Project and Discipline Engineering delivery team, currently comprising circa 50+; engineers, project engineers and study managers, managed in six core discipline study teams comprising; Project Engineering and Operations / Piping, Mechanical and Construction / Electrical / Control, Instrumentation & Telecommunications / Structural, Civil and Marine / Decommissioning . We are looking for someone who will: Key responsibilities of the role require early career Control and Instrumentation Engineering project lifecycle knowledge and will include: Participating in all C&I discipline activities including preparation and checking of documents, philosophies, specifications, procedures, standards, data sheets etc.; Contribute to front-end multi-discipline engineering studies, providing key control and instrumentation input; Brownfield cost estimation for C&I activities; Carry out varied C&I engineering studies as per client scope of work; Participating in safety studies (HAZOP, LOPA etc.); Ensuring instrument, control and telecom discipline design is performed in compliance with project requirements and satisfies all relevant safety and quality standards; Preparation, in conjunction with other disciplines, control and safeguarding philosophies and specifications. Requirements: We'd love to hear from you if you can demonstrate: Degree Qualified in relevant engineering subject; Previous early career experience working as a Control and Instrumentation Engineer; Excellent communication skills and full command of English language (written & spoken); Good broad computer literacy with competence in MS Office applications; Previous experience working in Concept Engineering (Front End / FEED) is an advantage; Working towards Chartered Engineer status is an advantage; North Sea, Oil and Gas Experience is an advantage; Experience in Energy Transition and/or low-carbon energy delivery is an advantage; Functional Safety Experience is an advantage; Alarm Rationalisation Experience is an advantage; Concept Engineering (Front End / FEED) is an advantage; Current offshore survival and medical certificates are an advantage. It is essential that applicants have the right to work in the United Kingdom. We invite you to learn more about our company by visiting and following us on LinkedIn for company updates. "As an equal opportunity employer Technip Energies considers only qualified applicants without regard to colour, age, race, ethnicity, sexual orientation, gender expression, disability, national origin, veteran or marital status." An opportunity is available for a Control & Instrumentation Engineer to join the Genesis UK Project and Discipline Engineering Delivery Team, located in either our Aberdeen or London office locations. The role is open to those early in their engineering career looking to further their career development and expand their knowledge and expertise across a number of key markets. You would become a key member of the C&I delivery group supporting the existing team and leading engineer to deliver C&I input to early phase multi-discipline consultancy studies. You will work across a broad and diverse range of studies for our extensive client base. We are seeking a Senior Process Engineer, who will support a wide range of clients on varied and interesting projects related to the energy industry . You will also interface with the wider Genesis organisation through interactions with other discipline teams and a range of clients in the UK and overseas. You will have the opportunity to work in related engineering disciplines based on your career interests, as you work towards Chartered Engineer status. We are currently seeking a Senior Pipeline Engineer to provide input and expertise in the design of subsea pipeline systems at all phases through the design of a system. This will include the execution and delivery of the design of subsea pipelines, risers and tie-in spools in both traditional oil and gas projects as well as Energy Transition such as CCUS, Hydrogen etc. We are currently seeking a Senior Process Engineer to join the UK Process Department. Genesis Process team is a dynamic group working across a range of assignments from traditional upstream oil and gas developments to emerging energy transition technologies. Our work encompasses feasibility assessments and concept selection for new developments through to technical support of mature assets. At Genesis we work in close collaboration with our clients, develop an understanding of their problems before identifying the possible solutions and supporting their decision making process.