AA Euro Group are currently seeking an experienced Mechanical Technician on behalf of a main contractor delivering a new Energy from Waste (EfW) facility in Slough. Working with the O&M (Operation and Maintenance) team, the Mechanical Engineering team, perform skilled mechanical work in support of the overall facility s operation and in maintaining operation of the facility in compliance with established production schedules and plant output requirements. You will; Perform a wide variety of mechanical repairs on all plant process systems and equipment, plans details of assigned jobs Inspects and lubricates all plant equipment routinely and makes necessary adjustments to ensure that equipment is operating efficiently Conduct Risk identification/analysis/assessments Gives work direction and instruction to other team members Attend HSE Inspections, audits, assessments, and meetings, reports promptly any HSE infringements Qualifications Recognised engineering apprenticeship, HNC/D qualification in engineering desirable Responsibilities in maintenance or engineering role in a 24/7 heavy process environment involving gearboxes, conveyors, steam raising plant, valves, rotating plant and hydraulic systems IOSH Managing Safely Team leader skills, fault diagnosis and problem solving, good at planning and management, safety focus Excellent communication (read, write and verbal) skills in English Language Additional information Competitive salary + Call Out Allowance Attractive company benefits including; Pension up to 10% employer contribution Life Assurance 4 x salary Private Medical Private Dental
Dec 10, 2025
Full time
AA Euro Group are currently seeking an experienced Mechanical Technician on behalf of a main contractor delivering a new Energy from Waste (EfW) facility in Slough. Working with the O&M (Operation and Maintenance) team, the Mechanical Engineering team, perform skilled mechanical work in support of the overall facility s operation and in maintaining operation of the facility in compliance with established production schedules and plant output requirements. You will; Perform a wide variety of mechanical repairs on all plant process systems and equipment, plans details of assigned jobs Inspects and lubricates all plant equipment routinely and makes necessary adjustments to ensure that equipment is operating efficiently Conduct Risk identification/analysis/assessments Gives work direction and instruction to other team members Attend HSE Inspections, audits, assessments, and meetings, reports promptly any HSE infringements Qualifications Recognised engineering apprenticeship, HNC/D qualification in engineering desirable Responsibilities in maintenance or engineering role in a 24/7 heavy process environment involving gearboxes, conveyors, steam raising plant, valves, rotating plant and hydraulic systems IOSH Managing Safely Team leader skills, fault diagnosis and problem solving, good at planning and management, safety focus Excellent communication (read, write and verbal) skills in English Language Additional information Competitive salary + Call Out Allowance Attractive company benefits including; Pension up to 10% employer contribution Life Assurance 4 x salary Private Medical Private Dental
Maintenance Engineers (Electrical) - Penrith, UK We are pleased to announce due to internal promotions within our organisation, and as part of our growth and exciting business transformation, we are looking for Maintenance Engineers with experience in electrical engineering to join our onsite team in Penrith, UK. Here at JELD-WEN UK, a global organisation that produces and manufactures Doors and Doorsets, Penrith is the European flagship for our UK production. With the addition of a new manufacturing line and a broader transformation agenda across the business, this is an exciting time to join us. This role will be focused on ensuring that planned and reactive work is completed in line with the site priorities, you will assist in the development of the departments Risk Assessment's, Safe Systems of Work and Planned Maintenance Routines, along with all thing's continuous improvement related. You will be part of a multi-disciplined team of Engineers covering a 24hr operation, providing support to the site teams to ensure compliance with company legislative requirements, educating, developing, and inspiring team members towards betterment and achievement. You will drive Engineering activities towards world-class performance; make continuous improvement standard practice. You will be safety and quality conscious and a good communicator, communicating openly, promptly, and professionally to internal and external stakeholders. We offer onsite working from our Penrith site, on a 2 week rotating shift pattern (7 days out of 14 worked, to include 12hr shifts), a competitive salary, 25 days holiday with the opportunity to purchase up to 5 days, 7.5% pension, Medicash Health Cash plan salary sacrifice scheme and opportunities to grow and develop your career. What your impact will be: Drive departments 5s campaigns and demonstrate 5s expansion as part of daily cadence. Receive and issue permits to work and ensure engineering work is carried out to H&S, environmental and engineering standards. Ensure Maintenance systems are fully utilised to optimise performance. Support with the training and coaching with the apprentices. Implementation of Risk Assessments and support of HAZARD assessments. Work to daily Standard Operating Procedures. Support Plant Managers and Leadership team to develop and deliver an engineering continuous improvement culture. You will contribute to safety audits and SIO generation (Safety Improvement Opportunities), creating a culture of 'safety first.' Ensure full compliance of Health and Safety procedures including SOP adherence, PPE and Workwear and incident investigations. You will report any safety issues promptly, reinforce policies to others where needed and reminding them of their right to stop work and the Jeld Wen lifesaving rules. Sustain good housekeeping standards and ensure compliance to production schedules. Actively participate in capturing and closing out 3C SQDCIP actions. Assist with shift handover and on occasion support/cover for the Shift Team Leader. What you'll need to succeed: Previous experience of working in a manufacturing/production environment. NVQ or equivalent in electrical engineering or similar discipline. A clear understanding of electrical systems with excellent fault diagnosis and ratification skills. An understanding of mechanical systems is preferred, but not essential. Good knowledge of PPM and continuous improvement systems. Previous experience of using a CMMS. Previous experience of working flexibly, conducting basic problem solving and training others. Good computer skills required and experience of basic business software. Flexible attitude towards shifts, able to work a 2 week rotating shift pattern (7 days out of 14 worked, to include 12hr shifts). "We are passionate about doors and are one of the world's largest manufacturers in this field. If you want to join us, we provide an international environment, a high level of flexibility, great potential for personal development and the opportunity to work with strong brands". About JELD-WEN Holding, Inc. JELD-WEN Holding, Inc. (NYSE: JELD) is a leading global designer, manufacturer and distributor of high-performance interior and exterior doors, windows, and related building products serving the new construction and repair and remodeling sectors. Based in Charlotte, North Carolina, the company operates across North America and Europe. Our associates are dedicated to bringing beauty and security to the spaces that touch our lives through our market-leading product brands across the world. The JELD-WEN family of brands includes JELD-WEN worldwide, LaCantina and VPI in North America, and Swedoor and DANA in Europe. For more information, visit or follow LinkedIn . JELD-WEN has been named by Forbes as one of 'America's Best Employers' and by Newsweek as one of the 'World's Most Trustworthy Companies'. What We Offer Investing in People is one of our Core Values, we strive to attract & retain great people! As such, JELD-WEN offers competitive compensation & benefits packages. JELD-WEN is an equal employment opportunity employer and does not tolerate discrimination, harassment, and/or retaliation based on individuals' physical traits, beliefs, and/or other characteristics that are protected under applicable laws. JELD-WEN does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services.
Dec 10, 2025
Full time
Maintenance Engineers (Electrical) - Penrith, UK We are pleased to announce due to internal promotions within our organisation, and as part of our growth and exciting business transformation, we are looking for Maintenance Engineers with experience in electrical engineering to join our onsite team in Penrith, UK. Here at JELD-WEN UK, a global organisation that produces and manufactures Doors and Doorsets, Penrith is the European flagship for our UK production. With the addition of a new manufacturing line and a broader transformation agenda across the business, this is an exciting time to join us. This role will be focused on ensuring that planned and reactive work is completed in line with the site priorities, you will assist in the development of the departments Risk Assessment's, Safe Systems of Work and Planned Maintenance Routines, along with all thing's continuous improvement related. You will be part of a multi-disciplined team of Engineers covering a 24hr operation, providing support to the site teams to ensure compliance with company legislative requirements, educating, developing, and inspiring team members towards betterment and achievement. You will drive Engineering activities towards world-class performance; make continuous improvement standard practice. You will be safety and quality conscious and a good communicator, communicating openly, promptly, and professionally to internal and external stakeholders. We offer onsite working from our Penrith site, on a 2 week rotating shift pattern (7 days out of 14 worked, to include 12hr shifts), a competitive salary, 25 days holiday with the opportunity to purchase up to 5 days, 7.5% pension, Medicash Health Cash plan salary sacrifice scheme and opportunities to grow and develop your career. What your impact will be: Drive departments 5s campaigns and demonstrate 5s expansion as part of daily cadence. Receive and issue permits to work and ensure engineering work is carried out to H&S, environmental and engineering standards. Ensure Maintenance systems are fully utilised to optimise performance. Support with the training and coaching with the apprentices. Implementation of Risk Assessments and support of HAZARD assessments. Work to daily Standard Operating Procedures. Support Plant Managers and Leadership team to develop and deliver an engineering continuous improvement culture. You will contribute to safety audits and SIO generation (Safety Improvement Opportunities), creating a culture of 'safety first.' Ensure full compliance of Health and Safety procedures including SOP adherence, PPE and Workwear and incident investigations. You will report any safety issues promptly, reinforce policies to others where needed and reminding them of their right to stop work and the Jeld Wen lifesaving rules. Sustain good housekeeping standards and ensure compliance to production schedules. Actively participate in capturing and closing out 3C SQDCIP actions. Assist with shift handover and on occasion support/cover for the Shift Team Leader. What you'll need to succeed: Previous experience of working in a manufacturing/production environment. NVQ or equivalent in electrical engineering or similar discipline. A clear understanding of electrical systems with excellent fault diagnosis and ratification skills. An understanding of mechanical systems is preferred, but not essential. Good knowledge of PPM and continuous improvement systems. Previous experience of using a CMMS. Previous experience of working flexibly, conducting basic problem solving and training others. Good computer skills required and experience of basic business software. Flexible attitude towards shifts, able to work a 2 week rotating shift pattern (7 days out of 14 worked, to include 12hr shifts). "We are passionate about doors and are one of the world's largest manufacturers in this field. If you want to join us, we provide an international environment, a high level of flexibility, great potential for personal development and the opportunity to work with strong brands". About JELD-WEN Holding, Inc. JELD-WEN Holding, Inc. (NYSE: JELD) is a leading global designer, manufacturer and distributor of high-performance interior and exterior doors, windows, and related building products serving the new construction and repair and remodeling sectors. Based in Charlotte, North Carolina, the company operates across North America and Europe. Our associates are dedicated to bringing beauty and security to the spaces that touch our lives through our market-leading product brands across the world. The JELD-WEN family of brands includes JELD-WEN worldwide, LaCantina and VPI in North America, and Swedoor and DANA in Europe. For more information, visit or follow LinkedIn . JELD-WEN has been named by Forbes as one of 'America's Best Employers' and by Newsweek as one of the 'World's Most Trustworthy Companies'. What We Offer Investing in People is one of our Core Values, we strive to attract & retain great people! As such, JELD-WEN offers competitive compensation & benefits packages. JELD-WEN is an equal employment opportunity employer and does not tolerate discrimination, harassment, and/or retaliation based on individuals' physical traits, beliefs, and/or other characteristics that are protected under applicable laws. JELD-WEN does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services.
Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY24, our shared passion helped us achieve revenues of 1.8bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Our Selby site is home to over 750 colleagues and a proud heritage. As the UK's number one manufacturer of private-label cooking sauces and pickles, we've been serving customers since 1914. Today, we produce more than 160 million units a year across 600 product lines for major retailers including Morrisons, Tesco and Asda. We're looking for an experienced HR Business Partner to join us on a fixed-term contract, covering maternity leave from January 2026 for around 10.5months. Because this role is rooted in our people and our day-to-day operations, you'll work full-time from our Selby site (YO8 5BJ). What You'll Be Doing Are you an experienced multiskilled maintenance engineer from an FMCG/Food background looking for a new challenge? As one of our highly skilled maintenance engineers you will be responsible for: Carrying out fault finding, problem solving and planned and preventative maintenance on plant equipment to maximise equipment reliability and performance Responding to internal customer needs to maximise production time according to given priorities Complying with food safety standards and controls to ensure all work is carried out correctly and safely Completing all necessary documentation ensuring that it is kept accurate and is audit ready Identify and recommend opportunities for improvements to promote Health & Safety and/or operational efficiency and effectiveness Maintenance on a range of manufacturing/production/packaging machinery Shift Pattern: 4 on 4 off rotating days and nights What We're Looking For We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. As one of our maintenance engineers you will: People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification Have experience working as a Maintenance Engineer within manufacturing/FMCG Utilise a proactive approach, with a willingness to learn and develop Have experience in electrical and mechanical fault finding If this sounds like you join us, grow with Greencore and be a part of driving our future success. What You'll Get in Return Competitive salary and job-related benefits Holidays Pension up to 8% matched Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Dec 09, 2025
Full time
Why Greencore? We're one of the UK's leading creators of convenience food, driven by a simple purpose: to make everyday taste better. As a vibrant and fast-moving business, we're proud to employ over 13,300 talented colleagues across 16 manufacturing sites and 17 distribution depots throughout the UK. Together, we bring delicious food to life, from sandwiches, soups, and sushi to cooking sauces, pickles, and ready meals. In FY24, our shared passion helped us achieve revenues of 1.8bn. Our extensive direct-to-store (DTS) network, with 17 depots nationwide, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring our customers enjoy the very best, whenever and wherever they shop. At Greencore we actively encourage our colleagues to apply for our vacancies, whether as a lateral move to broaden experience or the next step up to progress your career and development. We also welcome applications from external candidates who are eager to grow their career with us. Our Selby site is home to over 750 colleagues and a proud heritage. As the UK's number one manufacturer of private-label cooking sauces and pickles, we've been serving customers since 1914. Today, we produce more than 160 million units a year across 600 product lines for major retailers including Morrisons, Tesco and Asda. We're looking for an experienced HR Business Partner to join us on a fixed-term contract, covering maternity leave from January 2026 for around 10.5months. Because this role is rooted in our people and our day-to-day operations, you'll work full-time from our Selby site (YO8 5BJ). What You'll Be Doing Are you an experienced multiskilled maintenance engineer from an FMCG/Food background looking for a new challenge? As one of our highly skilled maintenance engineers you will be responsible for: Carrying out fault finding, problem solving and planned and preventative maintenance on plant equipment to maximise equipment reliability and performance Responding to internal customer needs to maximise production time according to given priorities Complying with food safety standards and controls to ensure all work is carried out correctly and safely Completing all necessary documentation ensuring that it is kept accurate and is audit ready Identify and recommend opportunities for improvements to promote Health & Safety and/or operational efficiency and effectiveness Maintenance on a range of manufacturing/production/packaging machinery Shift Pattern: 4 on 4 off rotating days and nights What We're Looking For We're not all the same at Greencore and our differences help us to make every day taste better for all our stakeholders. We truly put our people at the core and are proud of our diversity. As one of our maintenance engineers you will: People who have experience operating as an engineer, following a completed accredited apprenticeship or equivalent experience with appropriate Level 3 qualification Have experience working as a Maintenance Engineer within manufacturing/FMCG Utilise a proactive approach, with a willingness to learn and develop Have experience in electrical and mechanical fault finding If this sounds like you join us, grow with Greencore and be a part of driving our future success. What You'll Get in Return Competitive salary and job-related benefits Holidays Pension up to 8% matched Company share save scheme Greencore Qualifications Exclusive Greencore employee discount platform Access to a full Wellbeing Centre platform Throughout your time at Greencore, you will be supported with on the job training and development opportunities to further your career.
Mechanical Engineer Runcorn Permanent Full-time Shifts (Days / Afternoons + On-Call Rotation) Our client, a leading organisation within the manufacturing and circular economy sector, is seeking an experienced Mechanical Engineer to join their expanding engineering team in Runcorn. This is a fantastic opportunity for someone with strong mechanical maintenance experience who wants to work with modern plant machinery in a fast-paced, continuously improving environment. The Role As a Mechanical Engineer, youll play a key role in ensuring the safe, reliable and efficient operation of all mechanical plant equipment through both proactive and reactive maintenance. Key responsibilities include: Carrying out planned preventative maintenance (PPM) on mechanical systems and machinery Responding to breakdowns, diagnosing faults and completing high-quality repairs Using root cause analysis and proven fault-finding techniques to solve mechanical issues Disassembling, inspecting, repairing and rebuilding mechanical components including pumps, motors, gearboxes, conveyors and rotating machinery Reading mechanical drawings, manuals and technical documentation Keeping accurate maintenance logs including work completed, parts used and downtime records Supporting continuous improvement to reduce downtime and boost reliability Ensuring compliance with Health & Safety procedures, risk assessments and isolation processes The role follows a rotating shift pattern of days and afternoons, plus participation in an on-call schedule. About You To be successful in this position, you will have: Qualifications: (Accepted qualifications include) Apprenticeship in Mechanical Engineering or Level 3 Mechanical Engineering Qualification such as: NVQ Level 3 Mechanical Engineering Maintenance BTEC Level 3 Mechanical Engineering City & Guilds Level 3 Mechanical Maintenance HNC/HND in Mechanical Engineering IOSH is desirable but not essential Experience: Proven experience as a Mechanical Engineer / Maintenance Engineer / Mechanical Maintenance Technician Strong mechanical bias with solid hands-on ability Fault-finding experience across mechanical, pneumatic and hydraulic systems Competence working with rotating machinery (motors, pumps, gearboxes) Confident using workshop tools and machinery Strong understanding of preventative maintenance Excellent problem-solving and analytical skills Ability to work independently as well as part of a team In return, they offer: Generous holiday allowance Core hours, flexitime and time off in lieu Buying & selling holidays Employee benefits platform Electric vehicle salary sacrifice scheme Health & wellbeing Free flu jabs Occupational health Pension scheme Health cash plans Cycle to work scheme Social culture and events Internal training Academy E-learning opportunities Access to external training and supported education Long service awards Bonus scheme Sales incentive program Employee Assistance Programme Enhanced maternity and paternity leave Why Apply? This is an excellent opportunity to join a forward-thinking organisation committed to investment, innovation and long-term site development. If you're looking for stability, progression and the chance to work with a highly skilled engineering team, this role offers all of that and more. Pivt Group LTD is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, or any other characteristic protected by law. JBRP1_UKTJ
Dec 09, 2025
Full time
Mechanical Engineer Runcorn Permanent Full-time Shifts (Days / Afternoons + On-Call Rotation) Our client, a leading organisation within the manufacturing and circular economy sector, is seeking an experienced Mechanical Engineer to join their expanding engineering team in Runcorn. This is a fantastic opportunity for someone with strong mechanical maintenance experience who wants to work with modern plant machinery in a fast-paced, continuously improving environment. The Role As a Mechanical Engineer, youll play a key role in ensuring the safe, reliable and efficient operation of all mechanical plant equipment through both proactive and reactive maintenance. Key responsibilities include: Carrying out planned preventative maintenance (PPM) on mechanical systems and machinery Responding to breakdowns, diagnosing faults and completing high-quality repairs Using root cause analysis and proven fault-finding techniques to solve mechanical issues Disassembling, inspecting, repairing and rebuilding mechanical components including pumps, motors, gearboxes, conveyors and rotating machinery Reading mechanical drawings, manuals and technical documentation Keeping accurate maintenance logs including work completed, parts used and downtime records Supporting continuous improvement to reduce downtime and boost reliability Ensuring compliance with Health & Safety procedures, risk assessments and isolation processes The role follows a rotating shift pattern of days and afternoons, plus participation in an on-call schedule. About You To be successful in this position, you will have: Qualifications: (Accepted qualifications include) Apprenticeship in Mechanical Engineering or Level 3 Mechanical Engineering Qualification such as: NVQ Level 3 Mechanical Engineering Maintenance BTEC Level 3 Mechanical Engineering City & Guilds Level 3 Mechanical Maintenance HNC/HND in Mechanical Engineering IOSH is desirable but not essential Experience: Proven experience as a Mechanical Engineer / Maintenance Engineer / Mechanical Maintenance Technician Strong mechanical bias with solid hands-on ability Fault-finding experience across mechanical, pneumatic and hydraulic systems Competence working with rotating machinery (motors, pumps, gearboxes) Confident using workshop tools and machinery Strong understanding of preventative maintenance Excellent problem-solving and analytical skills Ability to work independently as well as part of a team In return, they offer: Generous holiday allowance Core hours, flexitime and time off in lieu Buying & selling holidays Employee benefits platform Electric vehicle salary sacrifice scheme Health & wellbeing Free flu jabs Occupational health Pension scheme Health cash plans Cycle to work scheme Social culture and events Internal training Academy E-learning opportunities Access to external training and supported education Long service awards Bonus scheme Sales incentive program Employee Assistance Programme Enhanced maternity and paternity leave Why Apply? This is an excellent opportunity to join a forward-thinking organisation committed to investment, innovation and long-term site development. If you're looking for stability, progression and the chance to work with a highly skilled engineering team, this role offers all of that and more. Pivt Group LTD is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, or any other characteristic protected by law. JBRP1_UKTJ
Machine Technician (4 on 4 off - Days & Nights) Site based role based commutable from Telford, Shrewsbury, Wolverhampton, Bridgnorth, Market Drayton, Newport, Whitchurch, Ironbridge, Broseley, 33,733 - 39,000(3 Months)- 43,000 Within 12 Months + 4 of 4 off shift + Weekly pay+ Ovrtime (1.5x) Structured Training + Pension + Health Cash Plan + Life Assurance + Avg Holiday Pay + Tech Schemes + 4 Weeks Holiday + Bank Holidays Are you a technically minded individual, mechanically or electrically inclined, looking to take the next step in your career within a world-class manufacturing environment? This is an exciting opportunity to join a global business recognised for its engineering excellence and cutting-edge production technology. The company is continually investing in its people, offering industry-leading training, long-term career progression, and a stable environment where your technical curiosity and problem-solving ability are valued and developed. You'll be working with highly automated machinery and advanced manufacturing systems, gaining the skills and knowledge to progress within a company that prides itself on innovation, teamwork, and continuous improvement. Whether your background is mechanical, electrical, or hands-on production, this role offers a genuine route to build a career in modern engineering and automation. The Role: Operate, monitor, and maintain advanced production machinery in a fast-paced manufacturing environment Support with changeovers, adjustments, and basic fault finding to ensure consistent performance Work closely with engineering teams to learn and develop new technical skills 4 on 4 off rotating shift pattern - covering both days and nights The Person: A mechanically or electrically minded individual with a hands-on approach Practical experience working in production, manufacturing, or a technical environment Enthusiastic, proactive, and eager to develop through structured technical training Looking for a long-term, stable career with opportunities to progress and upskill Reference Number: BBBH(phone number removed)MT To apply for this role or to be considered for further roles, please click "Apply Now" or contact Mark Wild at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Dec 09, 2025
Full time
Machine Technician (4 on 4 off - Days & Nights) Site based role based commutable from Telford, Shrewsbury, Wolverhampton, Bridgnorth, Market Drayton, Newport, Whitchurch, Ironbridge, Broseley, 33,733 - 39,000(3 Months)- 43,000 Within 12 Months + 4 of 4 off shift + Weekly pay+ Ovrtime (1.5x) Structured Training + Pension + Health Cash Plan + Life Assurance + Avg Holiday Pay + Tech Schemes + 4 Weeks Holiday + Bank Holidays Are you a technically minded individual, mechanically or electrically inclined, looking to take the next step in your career within a world-class manufacturing environment? This is an exciting opportunity to join a global business recognised for its engineering excellence and cutting-edge production technology. The company is continually investing in its people, offering industry-leading training, long-term career progression, and a stable environment where your technical curiosity and problem-solving ability are valued and developed. You'll be working with highly automated machinery and advanced manufacturing systems, gaining the skills and knowledge to progress within a company that prides itself on innovation, teamwork, and continuous improvement. Whether your background is mechanical, electrical, or hands-on production, this role offers a genuine route to build a career in modern engineering and automation. The Role: Operate, monitor, and maintain advanced production machinery in a fast-paced manufacturing environment Support with changeovers, adjustments, and basic fault finding to ensure consistent performance Work closely with engineering teams to learn and develop new technical skills 4 on 4 off rotating shift pattern - covering both days and nights The Person: A mechanically or electrically minded individual with a hands-on approach Practical experience working in production, manufacturing, or a technical environment Enthusiastic, proactive, and eager to develop through structured technical training Looking for a long-term, stable career with opportunities to progress and upskill Reference Number: BBBH(phone number removed)MT To apply for this role or to be considered for further roles, please click "Apply Now" or contact Mark Wild at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Service Engineer / Field Service Technician / Compressor Engineer required to join a global, market leading engineering manufacturer. The Successful Service Engineer will provide electrical and mechanical repair, service and maintenance on compressed air equipment at customer sites across Northwest - Manchester and surrounding areas. Full product training provided. The Service Engineer will ideally have a field service background inelectrical or mechanical engineering such as compressors, filtration, HVAC, industrial refrigeration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps, motors, rotating equipment, hydraulics, pneumatics, robotics or transferable electro mechanical engineering equipment. Package £30,000-£40,000 depending on experience Company van - door to door pay Company phone and laptop 25 days holiday + bank holidays Company pension + shares scheme Overtime Additional benefits Role To provide electrical and mechanical repair, service and maintenance of compressed air equipment at customer sites across Northwest UK. The Compressor Service Engineer will undertake planned and preventative maintenance, provide advice, diagnostics, fault finding of compressed air systems, vacuum pumps, blowers & dryers, air filtration and other compressed air products. Maintain, repair and install air compressors, vacuum pumps, blowers & dryers, filtration and other compressed air and pneumatic equipment across Northwest UK Installing compressed air systemsinto all forms of the manufacturing industry. Perform emergency breakdown fault finding and repairs on various compressed air equipment. Commutable across the Northwest - Manchester and surrounding areas. Liaise with various engineering departments. Requirements Proven diagnostic skills on complicated electrical / mechanical engineering systems. Full product training provided. Experience as a Field Service Engineer / Service Engineer / Service Technician / Installation Engineer / Compressor Engineer / Multiskilled Engineer / Mechanical Engineer / Electrical Engineer / M&E Engineer or similar. The ability in maintaining good professional working relationships with existing and new customers. Field servicing background in electrical or mechanical engineering such as compressors, filtration, HVAC, industrial refrigeration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps, motors, rotating equipment, hydraulics, pneumatics, robotics or transferable electro mechanical engineering equipment. Good working knowledge of three phase electrics and controls is advantageous. A technical engineering degree / qualification, apprentice trained, FGas or similar would be advantageous. Willingness to travel and commute across the Northwest - Manchester and surrounding areas. JBRP1_UKTJ
Dec 09, 2025
Full time
Service Engineer / Field Service Technician / Compressor Engineer required to join a global, market leading engineering manufacturer. The Successful Service Engineer will provide electrical and mechanical repair, service and maintenance on compressed air equipment at customer sites across Northwest - Manchester and surrounding areas. Full product training provided. The Service Engineer will ideally have a field service background inelectrical or mechanical engineering such as compressors, filtration, HVAC, industrial refrigeration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps, motors, rotating equipment, hydraulics, pneumatics, robotics or transferable electro mechanical engineering equipment. Package £30,000-£40,000 depending on experience Company van - door to door pay Company phone and laptop 25 days holiday + bank holidays Company pension + shares scheme Overtime Additional benefits Role To provide electrical and mechanical repair, service and maintenance of compressed air equipment at customer sites across Northwest UK. The Compressor Service Engineer will undertake planned and preventative maintenance, provide advice, diagnostics, fault finding of compressed air systems, vacuum pumps, blowers & dryers, air filtration and other compressed air products. Maintain, repair and install air compressors, vacuum pumps, blowers & dryers, filtration and other compressed air and pneumatic equipment across Northwest UK Installing compressed air systemsinto all forms of the manufacturing industry. Perform emergency breakdown fault finding and repairs on various compressed air equipment. Commutable across the Northwest - Manchester and surrounding areas. Liaise with various engineering departments. Requirements Proven diagnostic skills on complicated electrical / mechanical engineering systems. Full product training provided. Experience as a Field Service Engineer / Service Engineer / Service Technician / Installation Engineer / Compressor Engineer / Multiskilled Engineer / Mechanical Engineer / Electrical Engineer / M&E Engineer or similar. The ability in maintaining good professional working relationships with existing and new customers. Field servicing background in electrical or mechanical engineering such as compressors, filtration, HVAC, industrial refrigeration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps, motors, rotating equipment, hydraulics, pneumatics, robotics or transferable electro mechanical engineering equipment. Good working knowledge of three phase electrics and controls is advantageous. A technical engineering degree / qualification, apprentice trained, FGas or similar would be advantageous. Willingness to travel and commute across the Northwest - Manchester and surrounding areas. JBRP1_UKTJ
Our Story Highview Power are a growing global organisation who are leading the way towards a cleaner, more efficient, and secure energy future. We are built to become a world leader in smarter long duration energy storage, enabling nations, regions, cities, and corporations to achieve net zero. We know our employees are the key to our success and we are committed to creating a positive, inspiring, and inclusive working environment where you will play a vital part in driving change and helping to achieve the global ambition of becoming net zero. About the role & team As a member of the Hunterston Project team, you will primarily be responsible for delivering a fully integrated package or packages of equipment to meet the project requirements (spec, quality, cost, schedule etc). The ideal candidate will be a logical thinker with the capability to quickly analyse a problem and deliver a practical solution. They will have the ability to pick up new concepts rapidly and work both independently and collaboratively. The Package lead will be responsible for integrating and delivering the Integration of the Rotating equipment Mechanical Technology packages (Generator, Flywheel, Turbine, Compressors), reporting to the project engineering manager, and working as part of a geographically spread and diverse team. This role will also interact with multiple contractors, requiring a great degree of self and time management. Interfaces with appropriate personnel on the project team. This is an integral role that will help Highview Power to successfully deliver the Hunterston project, with involvement on future projects for the overall programme of projects to follow. The successful candidate will have the ability to work as part of a team, communicate effectively and prioritise their workload efficiently, which will be crucial to succeeding in this role. How you will make an impact A key project team member to deliver the critical equipment safely, on time, on budget and to the required quality standards: Lead on the design and delivery of the mechanical technology packages as an input to deliver the full Hunterston facilities scope, identifying gaps and work to close them. Manage the suppliers to ensure that delivery is in line with project requirements. Working with the project Interface Manager, manage key interfaces for Hunterston project between various parties and ensure effective and consistent communication take place between suppliers and that required input is provided in a timely manner. Review of vendor technical proposals to ensure they are appropriate and comply with our requirements. Identify areas for improvements, cost reductions, increases in efficiency etc. Work Closely With Project Services to ensure that related cost and schedule are adhered to Work with PSCM on managing contractor performance and developing KPI'S for the area of responsibility. Manage any change of scope, address design, contractor scope, cost and schedule issues early and in a fully documented way. Work with Quality Assurance Manager to develop and drive Quality Management Process for Carrington, ensuring contractor compliance and acceptance of products and services supplied. Identify and manage related risks to the scope of work. Participate in (and provide assurance) safety audits, design reviews, subcontractor's performance assessment, site readiness reviews, safety risk assessments, HAZIDs and HAZOPs as practically possible and ensure that all actions are registered and closed and signed off. Complete and hand over the mechanically complete and pre-commissioned delivery scope to commissioning /Operations confirming its suitability for commissioning and entry into service, together with clear definition of operating limits and guidance on inspection, maintenance and repair. Maintain an open dialogue with the Ops team Manage the delivery of O&M documentation Please note that this is not an exhaustive list of what the general responsibilities will be, and that the job description may be subject to changes according to the requirements of the organisation. You will be expected to complete all tasks within the level of your skill and ability. To be successful in the role Essential Requirements MEng Degree or equivalent qualification in Mechanical Engineering Minimum 3 - 5 years' experience. CAD modelling experience (AutoCAD/BricsCAD) Microsoft Office proficiency (Excel & Word). Ability to communicate effectively both orally and in writing. Sound report writing skills and ability to prepare, comprehend and communicate engineering and technological documents. Have good attention to detail Questioning nature, not afraid to ask questions. High level of integrity and diplomacy. A highly motivated, reliable and responsible individual. Genuine interest in the environment, sustainability and renewable energy. Desirable Requirements 3D plant CAD modelling experience (CADWorx, PDMS) Experience working on projects relating to energy or energy storage industry an advantage. Experience in power, industrial gases, oil & gas or other process industry an advantage. Experience in static and rotating equipment an advantage. Experience in HSE reviews, such as HAZID and HAZOP an advantage. Field experience on construction or operational site an advantage. Benefits The chance to make a difference! Competitive salary & discretionary bonus Discretionary annual salary review Private Medical Insurance 25 days annual leave Auto enrolment in pension following 3 month's service Season ticket loan Cycle to work loan Income Protection Benefits HUB - discount portal Group Life Insurance Learning & Development opportunities
Dec 09, 2025
Full time
Our Story Highview Power are a growing global organisation who are leading the way towards a cleaner, more efficient, and secure energy future. We are built to become a world leader in smarter long duration energy storage, enabling nations, regions, cities, and corporations to achieve net zero. We know our employees are the key to our success and we are committed to creating a positive, inspiring, and inclusive working environment where you will play a vital part in driving change and helping to achieve the global ambition of becoming net zero. About the role & team As a member of the Hunterston Project team, you will primarily be responsible for delivering a fully integrated package or packages of equipment to meet the project requirements (spec, quality, cost, schedule etc). The ideal candidate will be a logical thinker with the capability to quickly analyse a problem and deliver a practical solution. They will have the ability to pick up new concepts rapidly and work both independently and collaboratively. The Package lead will be responsible for integrating and delivering the Integration of the Rotating equipment Mechanical Technology packages (Generator, Flywheel, Turbine, Compressors), reporting to the project engineering manager, and working as part of a geographically spread and diverse team. This role will also interact with multiple contractors, requiring a great degree of self and time management. Interfaces with appropriate personnel on the project team. This is an integral role that will help Highview Power to successfully deliver the Hunterston project, with involvement on future projects for the overall programme of projects to follow. The successful candidate will have the ability to work as part of a team, communicate effectively and prioritise their workload efficiently, which will be crucial to succeeding in this role. How you will make an impact A key project team member to deliver the critical equipment safely, on time, on budget and to the required quality standards: Lead on the design and delivery of the mechanical technology packages as an input to deliver the full Hunterston facilities scope, identifying gaps and work to close them. Manage the suppliers to ensure that delivery is in line with project requirements. Working with the project Interface Manager, manage key interfaces for Hunterston project between various parties and ensure effective and consistent communication take place between suppliers and that required input is provided in a timely manner. Review of vendor technical proposals to ensure they are appropriate and comply with our requirements. Identify areas for improvements, cost reductions, increases in efficiency etc. Work Closely With Project Services to ensure that related cost and schedule are adhered to Work with PSCM on managing contractor performance and developing KPI'S for the area of responsibility. Manage any change of scope, address design, contractor scope, cost and schedule issues early and in a fully documented way. Work with Quality Assurance Manager to develop and drive Quality Management Process for Carrington, ensuring contractor compliance and acceptance of products and services supplied. Identify and manage related risks to the scope of work. Participate in (and provide assurance) safety audits, design reviews, subcontractor's performance assessment, site readiness reviews, safety risk assessments, HAZIDs and HAZOPs as practically possible and ensure that all actions are registered and closed and signed off. Complete and hand over the mechanically complete and pre-commissioned delivery scope to commissioning /Operations confirming its suitability for commissioning and entry into service, together with clear definition of operating limits and guidance on inspection, maintenance and repair. Maintain an open dialogue with the Ops team Manage the delivery of O&M documentation Please note that this is not an exhaustive list of what the general responsibilities will be, and that the job description may be subject to changes according to the requirements of the organisation. You will be expected to complete all tasks within the level of your skill and ability. To be successful in the role Essential Requirements MEng Degree or equivalent qualification in Mechanical Engineering Minimum 3 - 5 years' experience. CAD modelling experience (AutoCAD/BricsCAD) Microsoft Office proficiency (Excel & Word). Ability to communicate effectively both orally and in writing. Sound report writing skills and ability to prepare, comprehend and communicate engineering and technological documents. Have good attention to detail Questioning nature, not afraid to ask questions. High level of integrity and diplomacy. A highly motivated, reliable and responsible individual. Genuine interest in the environment, sustainability and renewable energy. Desirable Requirements 3D plant CAD modelling experience (CADWorx, PDMS) Experience working on projects relating to energy or energy storage industry an advantage. Experience in power, industrial gases, oil & gas or other process industry an advantage. Experience in static and rotating equipment an advantage. Experience in HSE reviews, such as HAZID and HAZOP an advantage. Field experience on construction or operational site an advantage. Benefits The chance to make a difference! Competitive salary & discretionary bonus Discretionary annual salary review Private Medical Insurance 25 days annual leave Auto enrolment in pension following 3 month's service Season ticket loan Cycle to work loan Income Protection Benefits HUB - discount portal Group Life Insurance Learning & Development opportunities
Job Reference: 1343 Job Location: Hoo, Rochester Job Salary: Competitive Job Type: Permanent Our Client requires an experienced Maintenance Engineer (electrical bias), this is a permanent, full-time position. Salary: Competitive - discussed on initial phone call - monthly pay Hours: Rotating shifts - Monday to Friday: 6am to 2pm / 2pm to 10pm Location: Hoo Benefits include: Discretionary Bonus Scheme. 25 days holiday, plus bank holidays. Increasing to 27 days after completion of 5 continuous years' service. Pension Scheme. Secure on-site parking. Full-time, Permanent, Site based no remote working available Maintenance Engineer Key Responsibilities Perform both reactive and planned maintenance on all machinery. Track, organise, and complete all PPM tasks. Maintain accurate records within the MaintainX system. Coordinate contractors and oversee machine servicing. Manage spare parts inventory for all equipment. Track and organise service and contractor documentation. Conduct routine safety inspections to support a Safety-First culture. Support Production teams when required. Participate in an Out-of-Hours Call Out rota. Contribute to continuous improvement projects. Maintenance Engineer Requirements Completed Electrical Engineering apprenticeship or similar with relevant experience. ONC/BTEC, HNC/BTEC, or equivalent in Electrical Engineering. Proven experience in a manufacturing environment. Strong communication and teamwork skills. Good working knowledge of Mitsubishi PLCs & HMIs. Strong analytical, fault-finding, and problem-solving abilities. Knowledge of electric motors and pneumatics. Basic mechanical skills. Ability to work independently and exercise sound judgement. Commitment to working within a safety-focused culture. Maintenance Engineer desirable skills/experience Experience with Fanuc Robotics Programming. Experience with Fanuc CNC Programming. Experience with ABB Robotics Programming.
Dec 09, 2025
Full time
Job Reference: 1343 Job Location: Hoo, Rochester Job Salary: Competitive Job Type: Permanent Our Client requires an experienced Maintenance Engineer (electrical bias), this is a permanent, full-time position. Salary: Competitive - discussed on initial phone call - monthly pay Hours: Rotating shifts - Monday to Friday: 6am to 2pm / 2pm to 10pm Location: Hoo Benefits include: Discretionary Bonus Scheme. 25 days holiday, plus bank holidays. Increasing to 27 days after completion of 5 continuous years' service. Pension Scheme. Secure on-site parking. Full-time, Permanent, Site based no remote working available Maintenance Engineer Key Responsibilities Perform both reactive and planned maintenance on all machinery. Track, organise, and complete all PPM tasks. Maintain accurate records within the MaintainX system. Coordinate contractors and oversee machine servicing. Manage spare parts inventory for all equipment. Track and organise service and contractor documentation. Conduct routine safety inspections to support a Safety-First culture. Support Production teams when required. Participate in an Out-of-Hours Call Out rota. Contribute to continuous improvement projects. Maintenance Engineer Requirements Completed Electrical Engineering apprenticeship or similar with relevant experience. ONC/BTEC, HNC/BTEC, or equivalent in Electrical Engineering. Proven experience in a manufacturing environment. Strong communication and teamwork skills. Good working knowledge of Mitsubishi PLCs & HMIs. Strong analytical, fault-finding, and problem-solving abilities. Knowledge of electric motors and pneumatics. Basic mechanical skills. Ability to work independently and exercise sound judgement. Commitment to working within a safety-focused culture. Maintenance Engineer desirable skills/experience Experience with Fanuc Robotics Programming. Experience with Fanuc CNC Programming. Experience with ABB Robotics Programming.
Company description: Dover Precision Components deliver performance-critical solutions for rotating and reciprocating machinery across the oil & gas, power generation, marine, industrial, chemical, and general processing markets. Comprising Waukesha Bearings, Bearings Plus, InproSeal and Cook Compression brands, our portfolio includes hydrodynamic bearings, active magnetic bearings, system and bear click apply for full job details
Dec 09, 2025
Full time
Company description: Dover Precision Components deliver performance-critical solutions for rotating and reciprocating machinery across the oil & gas, power generation, marine, industrial, chemical, and general processing markets. Comprising Waukesha Bearings, Bearings Plus, InproSeal and Cook Compression brands, our portfolio includes hydrodynamic bearings, active magnetic bearings, system and bear click apply for full job details
A leading renewable energy company in Glasgow is seeking a Mechanical Engineer to deliver vital mechanical technology packages for the Hunterston project. This role requires strong CAD skills, effective communication, and a commitment to sustainability. Ideal candidates will have 3-5 years of experience in mechanical engineering and a genuine interest in renewable energy. The position offers a competitive salary, benefits, and opportunities for professional development.
Dec 09, 2025
Full time
A leading renewable energy company in Glasgow is seeking a Mechanical Engineer to deliver vital mechanical technology packages for the Hunterston project. This role requires strong CAD skills, effective communication, and a commitment to sustainability. Ideal candidates will have 3-5 years of experience in mechanical engineering and a genuine interest in renewable energy. The position offers a competitive salary, benefits, and opportunities for professional development.
We re looking for a hands-on Pump Fitter to join a busy engineering workshop in Huddersfield. You ll work alongside a supportive team of multi-skilled engineers, helping keep a wide range of rotating and electro-mechanical equipment performing at its best. Hours & Pay 35-40K DOE Monday to Friday, 8:00am 4:30pm Overtime available: time and a half during weekdays, double time after the first 4 hours on Saturdays, and double time on Sundays Job Description of a Pump Fitter: Overhauling and restoring pumps, motors, fans, gearboxes and similar equipment Stripping down units, identifying faults, diagnosing issues and carrying out repairs Building and configuring gearboxes from stocked components to match customer specifications Occasionally attending customer sites when required Taking part in overtime work when necessary Requirements of a Pump Fitter Previous hands-on experience working with pumps or other rotating equipment Strong mechanical aptitude and confidence with strip-downs and re-builds Ability to fault-find and diagnose mechanical issues Understanding of tolerances, bearings, seals and general workshop practices Ability to read technical drawings (desirable) Experience with electric motors or gearboxes (advantageous but not essential) A positive attitude, good teamwork, and willingness to learn Flexibility for occasional site work and overtime Benefits Training and development to broaden your skills across oeration, with a particular focus on electrical testing and balancing of rotating assemblies as your experience grows 23 days holiday plus bank holidays Company pension scheme (statutory contribution level) Death-in-service benefit at 2 annual salary If you re practical, mechanically minded fitter and keen to develop your expertise, this role offers long-term stability and plenty of variety in a well-equipped workshop. Disclaimer At Venatu Recruitment Group, your right to privacy is important to us. By applying for this job, your information will be entered into our recruitment system. This will enable you to register for job alerts, apply for jobs and for us to help you find your next role. To read our full privacy policy please visit our website: (url removed)>
Dec 09, 2025
Full time
We re looking for a hands-on Pump Fitter to join a busy engineering workshop in Huddersfield. You ll work alongside a supportive team of multi-skilled engineers, helping keep a wide range of rotating and electro-mechanical equipment performing at its best. Hours & Pay 35-40K DOE Monday to Friday, 8:00am 4:30pm Overtime available: time and a half during weekdays, double time after the first 4 hours on Saturdays, and double time on Sundays Job Description of a Pump Fitter: Overhauling and restoring pumps, motors, fans, gearboxes and similar equipment Stripping down units, identifying faults, diagnosing issues and carrying out repairs Building and configuring gearboxes from stocked components to match customer specifications Occasionally attending customer sites when required Taking part in overtime work when necessary Requirements of a Pump Fitter Previous hands-on experience working with pumps or other rotating equipment Strong mechanical aptitude and confidence with strip-downs and re-builds Ability to fault-find and diagnose mechanical issues Understanding of tolerances, bearings, seals and general workshop practices Ability to read technical drawings (desirable) Experience with electric motors or gearboxes (advantageous but not essential) A positive attitude, good teamwork, and willingness to learn Flexibility for occasional site work and overtime Benefits Training and development to broaden your skills across oeration, with a particular focus on electrical testing and balancing of rotating assemblies as your experience grows 23 days holiday plus bank holidays Company pension scheme (statutory contribution level) Death-in-service benefit at 2 annual salary If you re practical, mechanically minded fitter and keen to develop your expertise, this role offers long-term stability and plenty of variety in a well-equipped workshop. Disclaimer At Venatu Recruitment Group, your right to privacy is important to us. By applying for this job, your information will be entered into our recruitment system. This will enable you to register for job alerts, apply for jobs and for us to help you find your next role. To read our full privacy policy please visit our website: (url removed)>
An established, family-run manufacturing company with over 40 years of success is seeking a Shift Maintenance Engineer to join their experienced team in the Whitby area. This is a hands-on, multi-skilled role with an electrical bias, working in a fast-paced and supportive environment where reliability and initiative are key. Key Responsibilities Maintain and repair a range of electrical and mechanical equipment Carry out electrical fault-finding and installations Support planned maintenance, project work and respond to breakdowns Ensure equipment operates safely and efficiently Rotating shift pattern earlies, days, nights on a Monday to Friday rotation About You Electrically apprentice-trained with recognised engineering qualifications Minimum 12 months' practical maintenance experience Confident working with 3-phase systems up to 415V Knowledge of mechanical, pneumatic or hydraulic systems Strong problem-solving, planning and communication skills What's on Offer A varied, hands-on role within a supportive, close-knit team Opportunities for training, development and career progression A stable, long-term position within a well-established manufacturing business A competitive salary up to £50k+ to include overtime at time and half and double
Dec 09, 2025
Full time
An established, family-run manufacturing company with over 40 years of success is seeking a Shift Maintenance Engineer to join their experienced team in the Whitby area. This is a hands-on, multi-skilled role with an electrical bias, working in a fast-paced and supportive environment where reliability and initiative are key. Key Responsibilities Maintain and repair a range of electrical and mechanical equipment Carry out electrical fault-finding and installations Support planned maintenance, project work and respond to breakdowns Ensure equipment operates safely and efficiently Rotating shift pattern earlies, days, nights on a Monday to Friday rotation About You Electrically apprentice-trained with recognised engineering qualifications Minimum 12 months' practical maintenance experience Confident working with 3-phase systems up to 415V Knowledge of mechanical, pneumatic or hydraulic systems Strong problem-solving, planning and communication skills What's on Offer A varied, hands-on role within a supportive, close-knit team Opportunities for training, development and career progression A stable, long-term position within a well-established manufacturing business A competitive salary up to £50k+ to include overtime at time and half and double
Müller UK & Ireland is wholly owned by Unternehmensgruppe Theo Müller which employs over 31,000 people throughout Europe. In the UK, Müller develops, manufactures and markets a wide range of branded and private label dairy products made with milk from 1,300 farmers in Britain.Müller is ranked within the top 20 in The Grocer's Top 100 list of Britain's Biggest Brands and is picked from shelves millions of times each year. Müller UK & Ireland includes: Müller Milk & Ingredients which aims to be Britain's private label dairy leader and produces branded and private label fresh milk, cream, butter and ingredients products. It boasts a network of dairies and depots servicing customers throughout the country. Müller Yogurt & Desserts which is the UK's leading yogurt manufacturer which aims to create millions more Müller moments for its consumers. It is responsible for major brands like Müller Corner, Müllerlight, Müller Bliss, Müller Rice, FRijj and Müller Kefir Smoothie and produces chilled desserts under licence from Mondelez International. It also supplies the UK private label yogurt market from a dedicated, state of the art yogurt facility. We are seeking an Engineering Technician to join us at our Severnside Dairy As an Engineering Technician you'll provide safe front line reactive maintenance. Actively identify root cause and bring the equipment back in to service as quickly as possible as well as actively seeking and identifying cost effective improvements to site assets and equipment, improving efficiency and reliability. Engineering Technician (Dairy) Severnside Permanent contract: 4 on 4 off (2 days & 2 nights, 7-7) Key responsibilities as an Engineering Technician: To ensure effective handover of information across shift Uses PMS to support prioritisation and problem solving (RCFA) To diagnose faults and to test , repair and maintain Mechanical / Electrical equipment To observe, recognise and report on machinery or component defects or symptoms of impending failure and provide CMMS data Contact OEM's and other suppliers for technical support as and when required and expedite parts when not available on site Lead shift based problem solving where corrective actions aren't clear Working as ONE TEAM with First Line Response Technician Coaching of operators with asset care tasks Identify & implement Improvements Identify life cycle issues and raise these with possible recommendations Use and support simple 5WHY OE techniques / RCA techniques through to 100 year fix Use and support departmental 5s programmes for workshops and stores What we're looking for: Recognised apprenticeship Experience within maintenance Manufacturing Industry Experience Mechanical/Electrical Biased ONC/HNC IOSHH / Nebosh - Desirable Electrical qualification Multiskilled engineer experience Please note this is a 4 on 4 off Shift role Days/Nights rotating (2 Days 2 Nights) What's in it for you? Competitive salary Generous annual leave allowance (276 hours) Access to Muller Rewards Platform Long term career with a company that invests in you! Career development and defined pathways Onsite car park Supportive team environment Life assurance Pension scheme 5% annual bonus (company target dependant)
Dec 09, 2025
Full time
Müller UK & Ireland is wholly owned by Unternehmensgruppe Theo Müller which employs over 31,000 people throughout Europe. In the UK, Müller develops, manufactures and markets a wide range of branded and private label dairy products made with milk from 1,300 farmers in Britain.Müller is ranked within the top 20 in The Grocer's Top 100 list of Britain's Biggest Brands and is picked from shelves millions of times each year. Müller UK & Ireland includes: Müller Milk & Ingredients which aims to be Britain's private label dairy leader and produces branded and private label fresh milk, cream, butter and ingredients products. It boasts a network of dairies and depots servicing customers throughout the country. Müller Yogurt & Desserts which is the UK's leading yogurt manufacturer which aims to create millions more Müller moments for its consumers. It is responsible for major brands like Müller Corner, Müllerlight, Müller Bliss, Müller Rice, FRijj and Müller Kefir Smoothie and produces chilled desserts under licence from Mondelez International. It also supplies the UK private label yogurt market from a dedicated, state of the art yogurt facility. We are seeking an Engineering Technician to join us at our Severnside Dairy As an Engineering Technician you'll provide safe front line reactive maintenance. Actively identify root cause and bring the equipment back in to service as quickly as possible as well as actively seeking and identifying cost effective improvements to site assets and equipment, improving efficiency and reliability. Engineering Technician (Dairy) Severnside Permanent contract: 4 on 4 off (2 days & 2 nights, 7-7) Key responsibilities as an Engineering Technician: To ensure effective handover of information across shift Uses PMS to support prioritisation and problem solving (RCFA) To diagnose faults and to test , repair and maintain Mechanical / Electrical equipment To observe, recognise and report on machinery or component defects or symptoms of impending failure and provide CMMS data Contact OEM's and other suppliers for technical support as and when required and expedite parts when not available on site Lead shift based problem solving where corrective actions aren't clear Working as ONE TEAM with First Line Response Technician Coaching of operators with asset care tasks Identify & implement Improvements Identify life cycle issues and raise these with possible recommendations Use and support simple 5WHY OE techniques / RCA techniques through to 100 year fix Use and support departmental 5s programmes for workshops and stores What we're looking for: Recognised apprenticeship Experience within maintenance Manufacturing Industry Experience Mechanical/Electrical Biased ONC/HNC IOSHH / Nebosh - Desirable Electrical qualification Multiskilled engineer experience Please note this is a 4 on 4 off Shift role Days/Nights rotating (2 Days 2 Nights) What's in it for you? Competitive salary Generous annual leave allowance (276 hours) Access to Muller Rewards Platform Long term career with a company that invests in you! Career development and defined pathways Onsite car park Supportive team environment Life assurance Pension scheme 5% annual bonus (company target dependant)
Müller UK & Ireland is wholly owned by Unternehmensgruppe Theo Müller which employs over 31,000 people throughout Europe. In the UK, Müller develops, manufactures and markets a wide range of branded and private label dairy products made with milk from 1,300 farmers in Britain.Müller is ranked within the top 20 in The Grocer's Top 100 list of Britain's Biggest Brands and is picked from shelves millions of times each year. Müller UK & Ireland includes: Müller Milk & Ingredients which aims to be Britain's private label dairy leader and produces branded and private label fresh milk, cream, butter and ingredients products. It boasts a network of dairies and depots servicing customers throughout the country. Müller Yogurt & Desserts which is the UK's leading yogurt manufacturer which aims to create millions more Müller moments for its consumers. It is responsible for major brands like Müller Corner, Müllerlight, Müller Bliss, Müller Rice, FRijj and Müller Kefir Smoothie and produces chilled desserts under licence from Mondelez International. It also supplies the UK private label yogurt market from a dedicated, state of the art yogurt facility. We are seeking an Engineering Technician to join us in our Blow Moulding Department at our Severnside Dairy As an Engineering Technician you'll provide safe front line reactive maintenance. Actively identify root cause and bring the equipment back in to service as quickly as possible as well as actively seeking and identifying cost effective improvements to site assets and equipment, improving efficiency and reliability. Engineering Technician (Blow Moulding) Severnside Permanent contract: 4 on 4 off (2 days & 2 nights, 7-7) Key responsibilities as an Engineering Technician: To ensure effective handover of information across shift Uses PMS to support prioritisation and problem solving (RCFA) To diagnose faults and to test , repair and maintain Mechanical / Electrical equipment To observe, recognise and report on machinery or component defects or symptoms of impending failure and provide CMMS data Contact OEM's and other suppliers for technical support as and when required and expedite parts when not available on site Lead shift based problem solving where corrective actions aren't clear Working as ONE TEAM with First Line Response Technician Coaching of operators with asset care tasks Identify & implement Improvements Identify life cycle issues and raise these with possible recommendations Use and support simple 5WHY OE techniques / RCA techniques through to 100 year fix Use and support departmental 5s programmes for workshops and stores What we're looking for: Recognised apprenticeship Experience within maintenance Manufacturing Industry Experience Mechanical/Electrical Biased ONC/HNC IOSHH / Nebosh - Desirable Electrical qualification Multiskilled engineer experience Please note this is a 4 on 4 off Shift role Days/Nights rotating (2 Days 2 Nights) What's in it for you? Competitive salary Generous annual leave allowance (276 hours) Access to Muller Rewards Platform Long term career with a company that invests in you! Career development and defined pathways Onsite car park Supportive team environment Life assurance Pension scheme 5% annual bonus (company target dependant)
Dec 09, 2025
Full time
Müller UK & Ireland is wholly owned by Unternehmensgruppe Theo Müller which employs over 31,000 people throughout Europe. In the UK, Müller develops, manufactures and markets a wide range of branded and private label dairy products made with milk from 1,300 farmers in Britain.Müller is ranked within the top 20 in The Grocer's Top 100 list of Britain's Biggest Brands and is picked from shelves millions of times each year. Müller UK & Ireland includes: Müller Milk & Ingredients which aims to be Britain's private label dairy leader and produces branded and private label fresh milk, cream, butter and ingredients products. It boasts a network of dairies and depots servicing customers throughout the country. Müller Yogurt & Desserts which is the UK's leading yogurt manufacturer which aims to create millions more Müller moments for its consumers. It is responsible for major brands like Müller Corner, Müllerlight, Müller Bliss, Müller Rice, FRijj and Müller Kefir Smoothie and produces chilled desserts under licence from Mondelez International. It also supplies the UK private label yogurt market from a dedicated, state of the art yogurt facility. We are seeking an Engineering Technician to join us in our Blow Moulding Department at our Severnside Dairy As an Engineering Technician you'll provide safe front line reactive maintenance. Actively identify root cause and bring the equipment back in to service as quickly as possible as well as actively seeking and identifying cost effective improvements to site assets and equipment, improving efficiency and reliability. Engineering Technician (Blow Moulding) Severnside Permanent contract: 4 on 4 off (2 days & 2 nights, 7-7) Key responsibilities as an Engineering Technician: To ensure effective handover of information across shift Uses PMS to support prioritisation and problem solving (RCFA) To diagnose faults and to test , repair and maintain Mechanical / Electrical equipment To observe, recognise and report on machinery or component defects or symptoms of impending failure and provide CMMS data Contact OEM's and other suppliers for technical support as and when required and expedite parts when not available on site Lead shift based problem solving where corrective actions aren't clear Working as ONE TEAM with First Line Response Technician Coaching of operators with asset care tasks Identify & implement Improvements Identify life cycle issues and raise these with possible recommendations Use and support simple 5WHY OE techniques / RCA techniques through to 100 year fix Use and support departmental 5s programmes for workshops and stores What we're looking for: Recognised apprenticeship Experience within maintenance Manufacturing Industry Experience Mechanical/Electrical Biased ONC/HNC IOSHH / Nebosh - Desirable Electrical qualification Multiskilled engineer experience Please note this is a 4 on 4 off Shift role Days/Nights rotating (2 Days 2 Nights) What's in it for you? Competitive salary Generous annual leave allowance (276 hours) Access to Muller Rewards Platform Long term career with a company that invests in you! Career development and defined pathways Onsite car park Supportive team environment Life assurance Pension scheme 5% annual bonus (company target dependant)
Müller UK & Ireland is wholly owned by Unternehmensgruppe Theo Müller which employs over 31,000 people throughout Europe. In the UK, Müller develops, manufactures and markets a wide range of branded and private label dairy products made with milk from 1,300 farmers in Britain.Müller is ranked within the top 20 in The Grocer's Top 100 list of Britain's Biggest Brands and is picked from shelves millions of times each year. Müller UK & Ireland includes: Müller Milk & Ingredients which aims to be Britain's private label dairy leader and produces branded and private label fresh milk, cream, butter and ingredients products. It boasts a network of dairies and depots servicing customers throughout the country. Müller Yogurt & Desserts which is the UK's leading yogurt manufacturer which aims to create millions more Müller moments for its consumers. It is responsible for major brands like Müller Corner, Müllerlight, Müller Bliss, Müller Rice, FRijj and Müller Kefir Smoothie and produces chilled desserts under licence from Mondelez International. It also supplies the UK private label yogurt market from a dedicated, state of the art yogurt facility. Multi Skilled Engineering Technician (Blow Moulding Department) Bellshill Permanent contract: 4 on 4 off (2 days / 2 nights: 7-7) As a Multi Skilled Engineering Technician your purpose is to provide high quality scheduled and unplanned/reactive maintenance across the blow moulding site. Actively identify root cause and bring the equipment back in to service as quickly as possible as well as seeking and identifying cost effective improvements to site assets and equipment, improving efficiency and reliability. Key responsibilities as Multi Skilled Engineering Technician: Ensure that you are conversant with all drawing Electrical, Pneumatic and Mechanical. Basic automation skills for fault finding and remediation, strong electrical skills HNC equivalent, sound mechanical skills for diagnosis and replacement Diligently complete all maintenance tasks, PM, CBM, CI and corrective. Contribute to FMEA activities when required. Identify & implement Improvements What we're looking for from a Multi Skilled Engineering Technician: Completion of a recognised apprenticeship HNC Electrical preferred, Mechanical with additional electrical qualification or competence Automation - CI tools and techniques would be advantageous Experience within maintenance Manufacturing Industry Experience ONC/HNC IOSHH / Nebosh - Desirable Please note this is a 4 on 4 off Shift role Days/Nights rotating (2 Days 2 Nights) What's in it for you as a Multi Skilled Engineering Technician? Career development and defined pathways Long term career with a company that invests in you! Generous annual leave allowance (276 hours) Access to Muller Rewards Platform saving money across numerous retailers Onsite car park Supportive team environment Life assurance Pension scheme 5% annual bonus (company target dependant)
Dec 09, 2025
Full time
Müller UK & Ireland is wholly owned by Unternehmensgruppe Theo Müller which employs over 31,000 people throughout Europe. In the UK, Müller develops, manufactures and markets a wide range of branded and private label dairy products made with milk from 1,300 farmers in Britain.Müller is ranked within the top 20 in The Grocer's Top 100 list of Britain's Biggest Brands and is picked from shelves millions of times each year. Müller UK & Ireland includes: Müller Milk & Ingredients which aims to be Britain's private label dairy leader and produces branded and private label fresh milk, cream, butter and ingredients products. It boasts a network of dairies and depots servicing customers throughout the country. Müller Yogurt & Desserts which is the UK's leading yogurt manufacturer which aims to create millions more Müller moments for its consumers. It is responsible for major brands like Müller Corner, Müllerlight, Müller Bliss, Müller Rice, FRijj and Müller Kefir Smoothie and produces chilled desserts under licence from Mondelez International. It also supplies the UK private label yogurt market from a dedicated, state of the art yogurt facility. Multi Skilled Engineering Technician (Blow Moulding Department) Bellshill Permanent contract: 4 on 4 off (2 days / 2 nights: 7-7) As a Multi Skilled Engineering Technician your purpose is to provide high quality scheduled and unplanned/reactive maintenance across the blow moulding site. Actively identify root cause and bring the equipment back in to service as quickly as possible as well as seeking and identifying cost effective improvements to site assets and equipment, improving efficiency and reliability. Key responsibilities as Multi Skilled Engineering Technician: Ensure that you are conversant with all drawing Electrical, Pneumatic and Mechanical. Basic automation skills for fault finding and remediation, strong electrical skills HNC equivalent, sound mechanical skills for diagnosis and replacement Diligently complete all maintenance tasks, PM, CBM, CI and corrective. Contribute to FMEA activities when required. Identify & implement Improvements What we're looking for from a Multi Skilled Engineering Technician: Completion of a recognised apprenticeship HNC Electrical preferred, Mechanical with additional electrical qualification or competence Automation - CI tools and techniques would be advantageous Experience within maintenance Manufacturing Industry Experience ONC/HNC IOSHH / Nebosh - Desirable Please note this is a 4 on 4 off Shift role Days/Nights rotating (2 Days 2 Nights) What's in it for you as a Multi Skilled Engineering Technician? Career development and defined pathways Long term career with a company that invests in you! Generous annual leave allowance (276 hours) Access to Muller Rewards Platform saving money across numerous retailers Onsite car park Supportive team environment Life assurance Pension scheme 5% annual bonus (company target dependant)
Parts Advisor Salary: Up to £31,000 + overtime paid at time and a half Hours: MondayFriday, 42.5 hours per week (rotating 8.5-hour shifts between 07:0018:00, 1-hour lunch) Plus: Alternate Saturday mornings, 08:0013:00 Are you an experienced Parts Advisor looking to join a thriving and supportive dealership environment? We are seeking a proactive and customer-focused Parts Advisor who enjoys working in a fast-paced parts department and delivering exceptional service to both internal and external customers. This is a fantastic opportunity for a Parts Advisor who takes pride in accuracy, efficiency, and high-quality customer interaction. If youre organised, technically aware and ready to contribute to a busy team, this role is for you. Core Responsibilities As a Parts Advisor, you will play a key front-of-house role, including: Managing dealership counter sales and handling customer parts enquiries Ensuring all customer orders are taken accurately and supplied to the correct specification Processing orders and receipts of goods in line with company procedures Maintaining a clean, tidy and well-presented parts area that reflects a modern retail operation Organising stock rotation, stock counts and ensuring correct inventory levels Working collaboratively with colleagues across the dealership To succeed as a Parts Advisor, you should bring: Previous Vehicle Parts experience (essential) Strong communication skills, both written and verbal The ability to enhance or develop new processes within the parts function Confident PC skills and familiarity with dealer systems and software Strong attention to detail and organisational skills Benefits Youll enjoy a competitive benefits package, including: 25 days holiday, increasing with service Pension scheme with up to 5% employer matched contribution Healthcare cash back scheme Discounts across major retailers, cinemas and theme parks Discount on Arval Contract Hire cars If youre an enthusiastic Parts Advisor who thrives on customer service, teamwork and accuracy, wed love to hear from you. Apply today and take the next step in your parts career! Consultant Liam Bolton - Octane Recruitment MDLOJ Octane Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter. Octane Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments JBRP1_UKTJ
Dec 09, 2025
Full time
Parts Advisor Salary: Up to £31,000 + overtime paid at time and a half Hours: MondayFriday, 42.5 hours per week (rotating 8.5-hour shifts between 07:0018:00, 1-hour lunch) Plus: Alternate Saturday mornings, 08:0013:00 Are you an experienced Parts Advisor looking to join a thriving and supportive dealership environment? We are seeking a proactive and customer-focused Parts Advisor who enjoys working in a fast-paced parts department and delivering exceptional service to both internal and external customers. This is a fantastic opportunity for a Parts Advisor who takes pride in accuracy, efficiency, and high-quality customer interaction. If youre organised, technically aware and ready to contribute to a busy team, this role is for you. Core Responsibilities As a Parts Advisor, you will play a key front-of-house role, including: Managing dealership counter sales and handling customer parts enquiries Ensuring all customer orders are taken accurately and supplied to the correct specification Processing orders and receipts of goods in line with company procedures Maintaining a clean, tidy and well-presented parts area that reflects a modern retail operation Organising stock rotation, stock counts and ensuring correct inventory levels Working collaboratively with colleagues across the dealership To succeed as a Parts Advisor, you should bring: Previous Vehicle Parts experience (essential) Strong communication skills, both written and verbal The ability to enhance or develop new processes within the parts function Confident PC skills and familiarity with dealer systems and software Strong attention to detail and organisational skills Benefits Youll enjoy a competitive benefits package, including: 25 days holiday, increasing with service Pension scheme with up to 5% employer matched contribution Healthcare cash back scheme Discounts across major retailers, cinemas and theme parks Discount on Arval Contract Hire cars If youre an enthusiastic Parts Advisor who thrives on customer service, teamwork and accuracy, wed love to hear from you. Apply today and take the next step in your parts career! Consultant Liam Bolton - Octane Recruitment MDLOJ Octane Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter. Octane Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments JBRP1_UKTJ
Our growing business has been all about British apples and pears since 1947. From father to son, every day for over 75 years, our family business is growing. We innovate and change but our values always stay the same. We re a team who pride ourselves on the Goatham s way, passionate about growing the very best quality British apples and pears. An opportunity has arisen for a dynamic and diligent electrically biased Multi-Skilled Engineer to join our Engineering team. The purpose of this role is to support with and facilitate the planned, preventative and routine maintenance of a range of equipment and machinery on site to ensure the smooth running of our facility. Responsibilities may include: To ensure all machines and equipment are maintained to the optimum standards through adequate maintenance Using fault finding techniques, react quickly to faults and breakdowns, communicating clearly with affected parties and working efficiently to fix the issue. Minimise the likelihood of breakdowns by keeping equipment in a good state of repair and seeking continuous improvement opportunities by looking for ways to reduce the cost impact to the business as a result of downtime and ensuring a systematic planned maintenance programme is in place Communicate with production teams to advance plan for downtime on machinery for service/modification or repairs that need carrying out Maintaining a stock of critical spare parts as well as ordering parts for service and repair work Ensuring work is carried out in a safe and efficient manner and in accordance with health and safety regulations Assisting with the installation and commissioning of new equipment Maintaining technical knowledge by attending educational workshops, reviewing professional publications, establishing personal networks and benchmarking best-practice Our perfect Multi-Skilled Engineer would have: Proven experience of working as a Multi-Skilled Engineer in a similar manufacturing environment An electrical apprenticeship served (City & Guilds), HNC, ONC, NVQ Level 3, 18th Edition or similar A strong electrical basis with mechanical skills A strong awareness of and full commitment to the adherence of health and safety guidelines A proactive approach with a focus on driving improvement Excellent attention to detail; strong diagnostic and problem-solving skills Experience of using CMMS (Computerised Maintenance Management Systems) Effective communication skills; can engage with all levels of the business with a minimum of B2 in English The ability to manage multiple tasks with the ability to reprioritise whilst continuing to manage expectations PLC fault finding & diagnostics experience The hours you would work: A 4 on 4 off rotating shift comprising of 07:00-19:00 and 12:00-24:00. During peak periods, shifts may change to 09:00-21:00 Salary : £57750/year What else we can offer you: 22.5 days holiday including bank holidays (with an opportunity to earn more holiday based on your length of service) Pension scheme Fortnightly pay Learning and development opportunities Discretionary Christmas bonus Free onsite parking Access to free Wi-Fi Free fresh fruit!
Dec 09, 2025
Full time
Our growing business has been all about British apples and pears since 1947. From father to son, every day for over 75 years, our family business is growing. We innovate and change but our values always stay the same. We re a team who pride ourselves on the Goatham s way, passionate about growing the very best quality British apples and pears. An opportunity has arisen for a dynamic and diligent electrically biased Multi-Skilled Engineer to join our Engineering team. The purpose of this role is to support with and facilitate the planned, preventative and routine maintenance of a range of equipment and machinery on site to ensure the smooth running of our facility. Responsibilities may include: To ensure all machines and equipment are maintained to the optimum standards through adequate maintenance Using fault finding techniques, react quickly to faults and breakdowns, communicating clearly with affected parties and working efficiently to fix the issue. Minimise the likelihood of breakdowns by keeping equipment in a good state of repair and seeking continuous improvement opportunities by looking for ways to reduce the cost impact to the business as a result of downtime and ensuring a systematic planned maintenance programme is in place Communicate with production teams to advance plan for downtime on machinery for service/modification or repairs that need carrying out Maintaining a stock of critical spare parts as well as ordering parts for service and repair work Ensuring work is carried out in a safe and efficient manner and in accordance with health and safety regulations Assisting with the installation and commissioning of new equipment Maintaining technical knowledge by attending educational workshops, reviewing professional publications, establishing personal networks and benchmarking best-practice Our perfect Multi-Skilled Engineer would have: Proven experience of working as a Multi-Skilled Engineer in a similar manufacturing environment An electrical apprenticeship served (City & Guilds), HNC, ONC, NVQ Level 3, 18th Edition or similar A strong electrical basis with mechanical skills A strong awareness of and full commitment to the adherence of health and safety guidelines A proactive approach with a focus on driving improvement Excellent attention to detail; strong diagnostic and problem-solving skills Experience of using CMMS (Computerised Maintenance Management Systems) Effective communication skills; can engage with all levels of the business with a minimum of B2 in English The ability to manage multiple tasks with the ability to reprioritise whilst continuing to manage expectations PLC fault finding & diagnostics experience The hours you would work: A 4 on 4 off rotating shift comprising of 07:00-19:00 and 12:00-24:00. During peak periods, shifts may change to 09:00-21:00 Salary : £57750/year What else we can offer you: 22.5 days holiday including bank holidays (with an opportunity to earn more holiday based on your length of service) Pension scheme Fortnightly pay Learning and development opportunities Discretionary Christmas bonus Free onsite parking Access to free Wi-Fi Free fresh fruit!
LOCATION: X-Site, Renfrew WORKING HOURS: working on a rotating 9 week rolling roster with other members of the security team, 40 hours per week PAY RATE: £13.00 per hour If you require any additional support or adjustments during the recruitment process, please don't hesitate to contact our Recruitment Department at . We're here to help! ROLE OVERVIEW AND PURPOSE This is an important role as a public face of the Security Team. A can-do and professional attitude is essential in this highly influential role. You also need to ensure exemplary standards of Security and Customer Service are always provided to the client and visitors to the site. KEY RESPONSIBILITIES • Readily interact with all visitors/tenants within the X-Site Braehead leisure facility, delivering first class customer focused service • Carry out regular patrols of the centre as detailed in the site assignment Instructions, always being proactive • Continuously look for opportunities to be of assistance to visitors at the centre, proactively helping wherever opportunities arise • Safeguard the site to ensure a non-threatening environment for all visitors/tenants • Ensuring all incidents are managed in accordance with site policies and procedures • Liaising with site control room proactively reacting to incidents and ensuring colleagues are fully briefed and always supported • Ensure any unsecure areas of the site are reported to Control Room immediately and action taken to resolve • Record/log all non-conformances and emergencies with the appropriate control room operatives • Deal efficiently and effectively with all emergencies ensuring the Centre team are kept fully always informed • Intelligent understanding of human behaviour, monitoring and surveillance of suspect individuals, logging, and reporting incidents in line with site/company polices • Maintain vigilance and highlight/manage unauthorised access by banned individuals • Ensure radio procedures are always adhered to • Ensure all events/incidents are recorded in the Security Officer notebook correctly and notebook policies are always adhered to • Undertake any other reasonable duties as required to meet the needs of the business. • Any other reasonable duties as requested by your line manager • Ensure a timely response to all security issues and events • Complete all training requirements as requested by line manager • Be available to cover at least one additional shift per month if requested to cover absence/annual leave • Liaise closely with the Environmental Services team delivering one service and highlight opportunities in working as one team • Be professional, pleasant, friendly, courteous, and helpful always whilst carry out duties to the highest standard REQUIRED SKILLS AND EXPERIENCE • SIA Front Line or SIA Door Supervisor Licence is required. SIA CCTV Licence is desirable. • Take ownership of all situations to ensure tasks are completed or escalated when necessary. • To always stay motivated aim high and achieve • To respect all staff and visitors within the centre. We're proud to offer a great range of benefits including: 24/7 GP: Both you and your immediate family can speak to a UK-based GP from the comfort of your own home Mental Health support and Life Event Counseling Get Fit Programme Financial and legal support Cycle to work scheme Access Perks at Work, our innovative employee app where you can find: Perks: discounts, gift cards, cashback, and exclusive offers Life: Search for resources and tools on topics ranging from family and life to health, money and work Support: Online chat or telephone service for urgent support in a crisis For more information about ABM's benefits, visit our careers page ABOUT US ABM is one of the world's largest providers of integrated facility services. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services that improve the spaces and places that matter most. ABM offers a comprehensive array of facility services that includes cleaning, engineering, parking, electrical & lighting, energy solutions, HVAC & mechanical, security, and mission critical solutions. ABM delivers these custom facility solutions to properties across a wide range of industries - from commercial office buildings to schools, airports, hospitals, data centres, manufacturing plants and distribution centres, entertainment venues and more. In the UK we're proud to service icon sites across the country with more than 10,000 team members. For more information, visit . ABM are committed to employment practices that promote diversity and inclusion in employment regardless of age, disability, gender reassignment, sex, marriage and civil partnership status, pregnancy and maternity status, race, religion or belief. We are proud members of the Armed Forces Covenant Employer Recognition Scheme.
Dec 08, 2025
Full time
LOCATION: X-Site, Renfrew WORKING HOURS: working on a rotating 9 week rolling roster with other members of the security team, 40 hours per week PAY RATE: £13.00 per hour If you require any additional support or adjustments during the recruitment process, please don't hesitate to contact our Recruitment Department at . We're here to help! ROLE OVERVIEW AND PURPOSE This is an important role as a public face of the Security Team. A can-do and professional attitude is essential in this highly influential role. You also need to ensure exemplary standards of Security and Customer Service are always provided to the client and visitors to the site. KEY RESPONSIBILITIES • Readily interact with all visitors/tenants within the X-Site Braehead leisure facility, delivering first class customer focused service • Carry out regular patrols of the centre as detailed in the site assignment Instructions, always being proactive • Continuously look for opportunities to be of assistance to visitors at the centre, proactively helping wherever opportunities arise • Safeguard the site to ensure a non-threatening environment for all visitors/tenants • Ensuring all incidents are managed in accordance with site policies and procedures • Liaising with site control room proactively reacting to incidents and ensuring colleagues are fully briefed and always supported • Ensure any unsecure areas of the site are reported to Control Room immediately and action taken to resolve • Record/log all non-conformances and emergencies with the appropriate control room operatives • Deal efficiently and effectively with all emergencies ensuring the Centre team are kept fully always informed • Intelligent understanding of human behaviour, monitoring and surveillance of suspect individuals, logging, and reporting incidents in line with site/company polices • Maintain vigilance and highlight/manage unauthorised access by banned individuals • Ensure radio procedures are always adhered to • Ensure all events/incidents are recorded in the Security Officer notebook correctly and notebook policies are always adhered to • Undertake any other reasonable duties as required to meet the needs of the business. • Any other reasonable duties as requested by your line manager • Ensure a timely response to all security issues and events • Complete all training requirements as requested by line manager • Be available to cover at least one additional shift per month if requested to cover absence/annual leave • Liaise closely with the Environmental Services team delivering one service and highlight opportunities in working as one team • Be professional, pleasant, friendly, courteous, and helpful always whilst carry out duties to the highest standard REQUIRED SKILLS AND EXPERIENCE • SIA Front Line or SIA Door Supervisor Licence is required. SIA CCTV Licence is desirable. • Take ownership of all situations to ensure tasks are completed or escalated when necessary. • To always stay motivated aim high and achieve • To respect all staff and visitors within the centre. We're proud to offer a great range of benefits including: 24/7 GP: Both you and your immediate family can speak to a UK-based GP from the comfort of your own home Mental Health support and Life Event Counseling Get Fit Programme Financial and legal support Cycle to work scheme Access Perks at Work, our innovative employee app where you can find: Perks: discounts, gift cards, cashback, and exclusive offers Life: Search for resources and tools on topics ranging from family and life to health, money and work Support: Online chat or telephone service for urgent support in a crisis For more information about ABM's benefits, visit our careers page ABOUT US ABM is one of the world's largest providers of integrated facility services. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services that improve the spaces and places that matter most. ABM offers a comprehensive array of facility services that includes cleaning, engineering, parking, electrical & lighting, energy solutions, HVAC & mechanical, security, and mission critical solutions. ABM delivers these custom facility solutions to properties across a wide range of industries - from commercial office buildings to schools, airports, hospitals, data centres, manufacturing plants and distribution centres, entertainment venues and more. In the UK we're proud to service icon sites across the country with more than 10,000 team members. For more information, visit . ABM are committed to employment practices that promote diversity and inclusion in employment regardless of age, disability, gender reassignment, sex, marriage and civil partnership status, pregnancy and maternity status, race, religion or belief. We are proud members of the Armed Forces Covenant Employer Recognition Scheme.
Overview In order to develop and expand the capabilities of SAFRAN Engineering Services in the UK, we are looking for some contractor support to join our growing team at Pitstone. The role is initially for 6m, inside IR35 and based onsite. Responsibilities You will be the focal point for any technical Engineering investigation support requirements to support on time delivery of product / customer technical queries. To be the focal for engineering to operations and product support within SEP to maintain status and priority information so that stakeholders have a clear vision of engineering activities relevant to them. To make sure engineering investigation action plans are well structured, managed and substantiated to enable clear and quick program decisions to be made to avoid line stops. Accountable for the technical quality of the work delivered by themselves and other less senior or external engineers assigned to them to support their work. Will represent the engineering function at daily production escalation stand-up meetings (module QRQC) to provide proactive engineering support and engineering action feedback to minimise line stops. Build & maintain good working relationship between all key stakeholders and Engineering function to allow effective and efficient communication. To maintain close alignment with the Configuration Management team and participate in the required change management board reviews to make sure in-service product modifications are properly addressed and controlled. Provide engineering input to budget forecasting activities as needed to support accurate budget forecasting. Depending of the paretos, run/lead projects to improve reliability and FTPR. Support SQA and SRPM in supplier investigation for design issue. Ensure the Local Bond MRB is supported and QNs actioned in timely manner. Lead and complete PRs/ CRS and Permits in a timely manner. Qualifications A Mechanical, Automotive or Aeronautical Engineering degree or equivalent qualification. Must be self-sufficient and largely self-motivated. Ability to communicate clearly through written and verbal means to all levels of staff e.g. direct reports, interact with other Engineering teams and the external customer. Ability to work under pressure to meet program deadlines. Extensive Design experience esp. rotating equipment, shaft, bearings seals, structures etc. Experienced state of the art 3D CAD software. Good working knowledge of MS Software i.e. Excel, Word, PowerPoint, Project Knowledge of electrical machines Must have an understanding of engineering materials and production methods relevant to them. Must be able to produce designs with consideration of design to cost, and ease of manufacture and assembly. Good time management, proactive with an ability to prioritise. Must have the ability to plan work efficiently to meet agreed monthly milestone tasks. Must be able to produce and deliver technical presentations to employees and customers at any level. Excellent communication and stakeholder management at all levels internally and externally Onsite subsidised canteen midday Friday finish
Dec 08, 2025
Full time
Overview In order to develop and expand the capabilities of SAFRAN Engineering Services in the UK, we are looking for some contractor support to join our growing team at Pitstone. The role is initially for 6m, inside IR35 and based onsite. Responsibilities You will be the focal point for any technical Engineering investigation support requirements to support on time delivery of product / customer technical queries. To be the focal for engineering to operations and product support within SEP to maintain status and priority information so that stakeholders have a clear vision of engineering activities relevant to them. To make sure engineering investigation action plans are well structured, managed and substantiated to enable clear and quick program decisions to be made to avoid line stops. Accountable for the technical quality of the work delivered by themselves and other less senior or external engineers assigned to them to support their work. Will represent the engineering function at daily production escalation stand-up meetings (module QRQC) to provide proactive engineering support and engineering action feedback to minimise line stops. Build & maintain good working relationship between all key stakeholders and Engineering function to allow effective and efficient communication. To maintain close alignment with the Configuration Management team and participate in the required change management board reviews to make sure in-service product modifications are properly addressed and controlled. Provide engineering input to budget forecasting activities as needed to support accurate budget forecasting. Depending of the paretos, run/lead projects to improve reliability and FTPR. Support SQA and SRPM in supplier investigation for design issue. Ensure the Local Bond MRB is supported and QNs actioned in timely manner. Lead and complete PRs/ CRS and Permits in a timely manner. Qualifications A Mechanical, Automotive or Aeronautical Engineering degree or equivalent qualification. Must be self-sufficient and largely self-motivated. Ability to communicate clearly through written and verbal means to all levels of staff e.g. direct reports, interact with other Engineering teams and the external customer. Ability to work under pressure to meet program deadlines. Extensive Design experience esp. rotating equipment, shaft, bearings seals, structures etc. Experienced state of the art 3D CAD software. Good working knowledge of MS Software i.e. Excel, Word, PowerPoint, Project Knowledge of electrical machines Must have an understanding of engineering materials and production methods relevant to them. Must be able to produce designs with consideration of design to cost, and ease of manufacture and assembly. Good time management, proactive with an ability to prioritise. Must have the ability to plan work efficiently to meet agreed monthly milestone tasks. Must be able to produce and deliver technical presentations to employees and customers at any level. Excellent communication and stakeholder management at all levels internally and externally Onsite subsidised canteen midday Friday finish
We are seeking a skilled Electrically Biased Rotating Equipment Technician to join our dynamic team. The successful candidate will primarily work in well-equipped workshop, with occasional site visits to local customer facilities for service, repair, or commissioning work. Duties will Include: - Diagnosis, repair, overhaul, and testing of rotating equipment including: Electric motors (AC/DC) Gearboxes Pumps (centrifugal, submersible, etc.) Fans and blowers Transformers (basic inspection and testing) - Electrical fault finding, motor refurbishment, and dynamic balancing. - Occasional on-site work for installation, maintenance, or emergency repairs. - Completing service reports and maintaining accurate job documentation. - Ensuring health & safety and quality standards are maintained at all times. Skills and Experience: - Proven hands-on experience working with rotating electrical and mechanical equipment. - Strong electrical bias with the ability to interpret electrical drawings and carry out fault diagnosis. - Competence in motor refurbishment, testing (e.g., insulation resistance, surge, and mechanical strip-down. - Experience using test equipment such as megohmmeters, multimeters, and vibration analysis tools. - Mechanical understanding of alignment, fitting bearings, seals, shafts, and coupling systems. - Ideally qualified to NVQ Level 3 / City & Guilds / ONC or equivalent in Electrical or Electro-Mechanical Engineering. Hours of work are 40 hours Mon- Fri 08.00 -16.30 day shift with occasional overtime or weekend work during busy periods. The role comes with a very competitive starting rate of 18.17 per hour together with company pension, death in service benefit and 4 weeks holiday (increasing to 5 weeks after 2 years) + bank holidays.
Dec 07, 2025
Full time
We are seeking a skilled Electrically Biased Rotating Equipment Technician to join our dynamic team. The successful candidate will primarily work in well-equipped workshop, with occasional site visits to local customer facilities for service, repair, or commissioning work. Duties will Include: - Diagnosis, repair, overhaul, and testing of rotating equipment including: Electric motors (AC/DC) Gearboxes Pumps (centrifugal, submersible, etc.) Fans and blowers Transformers (basic inspection and testing) - Electrical fault finding, motor refurbishment, and dynamic balancing. - Occasional on-site work for installation, maintenance, or emergency repairs. - Completing service reports and maintaining accurate job documentation. - Ensuring health & safety and quality standards are maintained at all times. Skills and Experience: - Proven hands-on experience working with rotating electrical and mechanical equipment. - Strong electrical bias with the ability to interpret electrical drawings and carry out fault diagnosis. - Competence in motor refurbishment, testing (e.g., insulation resistance, surge, and mechanical strip-down. - Experience using test equipment such as megohmmeters, multimeters, and vibration analysis tools. - Mechanical understanding of alignment, fitting bearings, seals, shafts, and coupling systems. - Ideally qualified to NVQ Level 3 / City & Guilds / ONC or equivalent in Electrical or Electro-Mechanical Engineering. Hours of work are 40 hours Mon- Fri 08.00 -16.30 day shift with occasional overtime or weekend work during busy periods. The role comes with a very competitive starting rate of 18.17 per hour together with company pension, death in service benefit and 4 weeks holiday (increasing to 5 weeks after 2 years) + bank holidays.
