520 jobs found

Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste

M&E Technician - National Opportunities (Facilities Services Division) Location: UK Wide - including London, South East, Midlands, North West, Yorkshire, North East & Scotland, Plymouth Business Unit: NG Bailey - Facilities Services We are always looking to connect with talented M&E Technicians across the UK to join our Facilities Services division. As we continue to grow and support new and existing customer contracts, we welcome applications from skilled engineers interested in current and future opportunities. About the Role As an M&E Technician, you will play a key role in delivering planned and reactive maintenance across a range of commercial buildings, including offices, retail, mixed-use developments, critical environments, and public sector sites. Working as part of our onsite or mobile engineering teams, you'll ensure the safe, efficient, and high-quality operation of mechanical and electrical systems. Typical responsibilities include: Carrying out PPM and reactive maintenance on M&E plant and building services. Fault finding, repairs, and minor installations. Supporting statutory compliance tasks (e.g., emergency lighting, water hygiene, LV checks). Providing high levels of customer service to clients and building users. Ensuring all work is completed safely and in line with NG Bailey procedures. We're Looking For Recognised electrical or mechanical qualification (e.g., City & Guilds, NVQ Level 2/3, ONC, 18th Edition for electrical roles). Hands-on experience working with building services systems such as AHUs, FCUs, pumps, HVAC plant, small power, lighting, or basic controls. Strong fault-finding skills and experience with hand tools and test equipment. Ability to work independently or as part of a wider engineering team. Desirable: Experience within commercial FM, critical environments, or multi-skilled engineering roles. Desirable: Additional tickets such as F-Gas, LVAP, IPAF, PASMA, or water hygiene. What We Offer Opportunities to work on high-profile commercial and corporate facilities contracts. Career development and internal progression pathways across engineering, supervision, and management. 40 hours per week with opportunities for overtime. A supportive team culture with a strong focus on safety and wellbeing. Competitive benefits including: Pension with up to 8% employer contribution Private medical insurance Commercial vehicle (for mobile roles) Salary sacrifice car scheme (hybrid/EV) 25 days holiday + wellbeing and volunteering days 24/7 Employee Assistance Programme Flexible benefits package to suit your lifestyle Register Your Interest Click 'Apply' to submit your details and join our national M&E talent pool.If your CV matches our upcoming opportunities, a member of our team will get in touch to discuss suitable roles now or in the future. Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.

Job Title: Facilities Technician Salary: (£37k - £42k) DOE - Paid hourly, overtime expected Department: Maintenance & Facilities Department Location: St Athan, South Wales, CF62 4WB Contract: Permanent Hours: 39 hours - (Mon-Thurs 06:15 to 15:15, Fri 06:15 to 11:15) Benefits: Cycle to Work, Employee Assistance Programme, Long-service Awards, Company, Pension Role Purpose The Facilities Technician will be responsible for the day-to-day planned and reactive maintenance of all facilities and building fabric (i.e. welfare areas, HVAC, electrical distribution & various plant rooms etc.) across the estate working within a multi-disciplined maintenance team led by AML Maintenance Management Team. The individual should be highly motivated, ensuring the client receives the best service, whilst having a common-sense approach to commercial aspects of the contract. You will also be responsible for supporting improving, implementing & maintaining technical processes and procedures and will lead Health and Safety standards in line with site requirements. Main Duties and Responsibilities Repair and maintain all facilities and building fabric equipment and machinery in a timely and efficient manner based on criticality to production stoppages. Carry out the Planned Preventative Maintenance (PPM) Schedule to reduce breakdowns and raise any reactive maintenance work required. Ensure that all maintenance work performed is always carried out in a safe manner ensuring that all appropriate risk assessments and method statements are adhered to and comply with relevant Health & Safety regulations. Improve the current PPM system and assist in the integration of the customers Operating System for future PPM management of infrastructure assets. Identify opportunities for improvements to working processes and customer assets, undertaking or assisting with their implementation. Understand the customer quality needs and to comply with the various audit processes to ensure that both customers expectations are met. Apply company policies, processes and procedures where stipulated and, where necessary, develop, or assist in the development of new practices. Sub-contractor management in line with customer and site management procedures. Participate in the implementation of contingency procedures for asset breakdowns and other site-specific customer requirements. Ensure customers departmental monthly KPI s are achieved as per contractual agreements. Support an "out of hours" reactive maintenance function working with the site based technical team &/or Sub-contractors for all aspects of critical plant and equipment. Qualifications, Knowledge and Experience Essential Qualifications NVQ Level 2 - Electrical or Mechanical Engineering (Or equivalent) 18th Edition Electrical IPAF Fabrication & Welding (415V) Electrical LV Systems H&S Systems and Procedures Microsoft Office - Inc. Word, PowerPoint and Excel Compressed Air Systems Gas Boilers / Burners HVAC - AHU's / ACU's / FCU's HW Systems & Controls CAFM / CMMS / BMS Systems Water Treatment Systems Desirable HNC or NVQ Level 3 - Engineering (or equivalent) Electrical Inspecting & Testing Gas Safe Forklift License Basic PLC programming capability Fault Finding capability and problem resolution techniques Refrigeration (F-Gas) Interrogating Trend BMS Systems Electrical modifications and installations Automotive manufacturing background Chlorine Dosing Systems Closing date is 15th May 2026 Hawk 3 Talent Solutions are acting as an Employment Agency on behalf of its client To Apply please follow the application process for the site this job is advertised on or email your CV to (url removed) By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy. To view our full Privacy Policy please visit our website. Hawk 3 Talent Solutions are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job. Whilst we endeavour to respond to all applications individually, due to high volumes, this is not always possible. Thank you for your interest in this role and we look forward to working with you in the future.

Vehicle Maintenance Technician Basic Salary: £45,499 PA Location: Fawley (On-Site Workshop) Shift Pattern (rotation): This can vary on winter period Day Shift: Monday to Friday, Back Shift: Monday to Friday, Overtime - Saturday Mornings: 0600 - 1200 On-Call Rota: 1 in 4 weeks (Additional payment for on call) £5,000 Sign-On Bonus A warm welcome to the team and recognition of the valuable skills you bring, paid after successful completion of 3 month settling in period. First-Year OTE of circa £57,871 Combine your base salary, expected overtime, annual bonus, and sign-on bonus for a rewarding first-year package. Annual Bonus (£2,000) Recognising your ongoing personal and team contribution to our fleet safety and operation. Expected Overtime Earnings (£7,000) Regular and realistic additional overtime earnings, paid at 1.5x hourly rate, with potential to be higher than this (dependent on business need) Industry-Leading Training From LPG to IRTEC to gaining your HGV license, we'll support you to grow. Private medical insurance (including discounted family cover) 25 days annual leave + 8 bank holidays (Increasing with service) Holiday days scheme (Option to buy additional annual leave) Pension scheme - Matched pension contributions 7.5% Life assurance (4x salary) & income protection Retail discounts & discounted Calor gas & appliances On site car parking Why Join Calor? At Calor, we know that our HGV Technicians are the heartbeat of our operation. As we prepare for our peak winter season, when thousands of families and businesses across the UK rely on us most, we recognise just how vital your role is. Without your expertise, our fleet wouldn't be safe, ready, or reliable enough to deliver the energy that keeps homes warm and businesses moving. But this isn't just about winter. All year round, your skills make a difference, protecting our fleet, supporting our drivers, and ensuring our customers can depend on us. If you want to be part of a team that keeps the UK warm in winter, fueled for summer BBQs, and energised through every season, there's never been a more important time to bring your skills to Calor. This is more than just a technician role, it's the chance to join a team where camaraderie, support, and teamwork are at the heart of everything we do. In our busy workshops you'll find friendly faces and colleagues who've got your back, keeping each other moving through the tough days and celebrating the wins together. With specialist training, recognised qualifications, and a company that invests in your future, you'll do more than build and repair, you'll be part of a team that's our greatest asset. To Join our team, you will need: Essential: Qualifications in Heavy Vehicle Maintenance & Repair. We will also consider candidates with a strong, proven background in the industry, whether time-served, with relevant qualifications, or with equivalent practical experience. Knowledge of vehicle systems, trailers, plant, and workshop equipment. Strong diagnostic skills with a safety-first mindset. Team player with good communication and organisation skills. Desirable (but not essential, as we will help you obtain these): HGV C licence and ADR. When you join us, you'll benefit from: Structured training, including in-house programmes such as LPG Basics, Wheel Security, Basic Electrics, and more. Specialist outsourced training such as IRTEC Inspection, ADR (Class 2 - Gases), Safe Loading Pass, and the opportunity to gain your Category ( Class 1 & 2 ) C + E licence. Ongoing opportunities to upskill in tank testing, confined space, product-specific training, and more. Maintaining quality tools is important for safety and performance. If a tool is no longer performing as expected, worn or damaged tools can be replaced at the discretion of your manager, helping you stay efficient and safe on the job Ready to take the next step? Apply today and start your journey with Calor.

Junior Recruitment Consultant London £24'000 - £27'000 Basic (Dependent on Experience + OTE £65,000 First year + Uncapped Commission up to 40% + Regular Incentives + 25 Days Holiday + Flexibility + Career Progression + Training Are you looking for exceptional earning potential and career development to Manager and Director levels? Work within an established Recruitment Consultancy that will offer you first class training and development to make you the best you can be, whilst having the opportunity to earn £65,000+ in your first year. Our company exists to create top earners and career focused, high performers to be part of our elite club where self development is key. You will be encouraged to constantly learn, become great at what you do and offer a high level, consultative service to our clients based on building great teams of people. Your Journey With Us Will Include; A week long , one to one induction with a Director of Future, designed to introduce you to the Company and our processes get you going on your journey as a Recruitment Consultant with us. Our working environment is buzzy, performance focused and full of like-minded people that want to succeed in life and that will welcome you and help you every step of the way. Through training and ongoing development, you will learn how to find better business opportunities, sell effectively and interview candidates to understand what really makes motivates them. You will be encouraged to improve every day, under the guidance of a Director team that have a proven track record of creating successful Consultants and Business Leaders over the last 15 years. Your Role As A Junior Consultant Will Include: Trainee Recruitment Consultant - Identifying and targeting growing engineering companies to work withNetworking and building relationships with key people in businessesAttracting and interviewing the best engineering talent for your clientsGuiding candidates through the process and helping them make defining career movesMeeting clients to develop and strengthen exclusive relationships when needed What We Offer: Competitive salary and uncapped commission - up to 40% with NO thresholdsRegular salary reviews every 3 monthsTraining and continuous developmentMeritocratic career progression - based on your results25 Days holiday with an extended Christmas breakRegular incentives with individual prizes from gift vouchers to dinners at top restaurants and holidaysTeam trips - recent destinations including Prague, Las Vegas, BierfestSubsidised gym membership / work life balance and good fitness encouragedBest recruitment tools - including Bullhorn, Sourcebreaker, Linkedin Recruiter You Will Be: Trainee Recruitment Consultant OR experienced Sales PersonNatural leader, excelled in a sport, hobby or music. e.g. Captain of a sports teamEntrepreneurial - our progression is based on creating managers, directors and business owners of the futureExcellent communicator, personable relationship builderStrong work ethic and a driven, ambitious, and determined mind setDriving License and own vehicle - can get to EN9 3SL (Waltham Abbey) If this sounds like you or you want to know more, call Charlie Auburn on for an informal and confidential discussion - This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.

To take a leading role in identifying, analysing and managing business and compliance risk and to draft, critically evaluate and agree robust terms and conditions for commercial contracts covering products and services supplied by, and to, the Group of Companies. Client Details A UK-based technology group that designs, manufactures, and supports advanced underwater and subsea technologies for global defence and commercial maritime customers Description Provide specialist legal advice and support on commercial contracts within the defence sector, including sales, IP licensing, procurement, collaboration, consulting, master services, indemnity, and non-disclosure agreements. Review and assess customer contractual terms and conditions, identifying deviations from Company standards and policies, and highlighting actual and potential risks relating to liability, intellectual property, warranties, and security. Advise on non-contractual legal matters where required and manage interactions with external legal advisers and specialists. Support commercial teams and senior management during contract negotiations by providing clear recommendations, options, and proposed amendments; liaising directly with customers where appropriate to achieve acceptable agreements. Contribute to the development of commercial and contractual awareness across the Group through guidance, updates, and structured training initiatives. Research and advise on country-specific legal and regulatory requirements impacting contractual obligations and Company compliance. Liaise with insurers, lawyers, and other external advisers to clarify contractual issues and obtain specialist input to support negotiations. Maintain accurate and auditable records for all non-standard contracts, including correspondence, policy deviations, amendments, and executed agreements. Ensure contract management activities align with Company policies, procedures, and best practice across the Group. Work closely with internal functions including Governance & Risk, Finance, Sales, HSE, and HR to ensure contractual compliance relating to insurance, export controls, health and safety, tax, and employment matters. Maintain strong working knowledge of FARs, DFARS, DPAS, DEFCONs, DEFFORMS, and other procurement regulations across multiple jurisdictions, and advise accordingly. Profile Law degree with strong commercial legal foundations. Proven experience in a Commercial / Contracts Manager or similar role, with hands-on expertise in drafting, negotiating, and managing a wide range of commercial contracts in-house or private practice. Background in defence and related sectors (oil & gas, offshore renewables, engineering, oceanographic), with experience of complex, high-risk commercial agreements. Demonstrable experience in international and cross-border contracting, including ownership of bespoke drafting across multiple OpCos and jurisdictions. Advanced contract drafting capability, including collaboration, R&D, reseller, and agency agreements, with strong commercial risk analysis. Solid understanding of intellectual property, third-party software risks, and IP protection strategies. Strong commercial judgement, able to develop pragmatic risk-mitigation solutions within legal and regulatory frameworks. Comfortable working independently under pressure, managing volume, detail, and tight deadlines. Experience advising and influencing commercial teams and senior stakeholders in contract negotiations. Ability to lead reseller/agent frameworks, due diligence, and competition law advice across a group environment. Job Offer Discretionary performance-related bonus (PRP) based on company and individual performance 25 days annual leave plus UK bank holidays, with the option to purchase up to 5 additional days Flexible working arrangements scheme to support work-life balance Christmas shutdown, with additional paid time off over the festive period Generous pension scheme (Aviva), with company contributions increasing with age Group life assurance (6x basic salary death-in-service benefit) Group income protection scheme following company sick pay period Westfield Health Cash Plan providing cashback on healthcare and wellbeing services Employee Assistance Programme (24/7 support for personal, legal, financial, and wellbeing matters) Cycle to Work scheme Electric Vehicle (EV) scheme and EV charging points at HQ (eligibility criteria apply) Training and development opportunities across the business Active wellbeing initiatives and programmes Costco membership available to employees Payroll giving scheme for charitable donations Regular social activities organised by a social committee Sonardyne Champions recognition scheme (£250 award) Long service awards recognising , and 40 years' service

We have an opportunity for a Contracts Manager - Heating and Ventilation to join our team. This role will be based in Wembley, twice a week with travel to other sites, covering London & Hertfordshire as and when required. SNG operates a Hybrid working model, we support both home working & onsite. This pivotal role will oversee replacement, servicing, maintenance, and small project works, ensuring systems are safe, compliant, and operating efficiently. You will play a key role in delivering a high-quality, value-for-money service for our customers. The Role: Your responsibilities will include : Lead and manage contracts for heating plant, mechanical ventilation, and heat networks, ensuring full compliance with all statutory and regulatory requirements. Monitor contractor performance against specifications and KPIs, chair review meetings, and drive service improvements where required. Oversee budgets, forecasting, spend control, and authorise payments and variations to ensure value for money. Act as the key point of contact for contractors, residents, and stakeholders, resolving operational issues and keeping customers informed. Analyse repairs trends to inform planned works and continuous improvement initiatives. Support procurement exercises and ensure contracts align with organisational requirements. Oversee third-party audit programmes and maintain accurate compliance records from inception to closure. Investigate incidents and complaints, embedding lessons learned and promoting a strong culture of safety and compliance. Build effective working relationships across teams and partners to deliver safe, timely, and customer-focused outcomes. To be successful in this role you'll need: Essential: Level 3 NVQ Diploma in Gas Maintenance and Repair (or equivalent experience). Strong technical knowledge of heating and ventilation systems, gas safety, and commercial contract management. Sound understanding of current legislation and regulations, including Gas Safety Regulations 1998, Health & Safety legislation, CDM, and relevant building regulations. Experience managing third-party contractors and delivering large-scale gas testing programmes. Proven ability to manage budgets, forecast spend, and deliver value for money while mitigating risk. Confident communicator with strong interpersonal skills, able to influence, challenge, and represent the organisation professionally. Ability to maintain accurate compliance and project records from inception to completion. Good working knowledge of Microsoft Office (Word, Excel, Outlook). Strong organisational and time management skills, with the ability to manage competing priorities and meet deadlines. A collaborative approach, high level of integrity, and commitment to continuous professional development. Willingness to be office-based and travel between sites as required. Desirable: Experience within Social Housing or a large, complex Housing Association. Commercial Gas qualifications and Gas Safe registration, with evidence of continued CPD. Unvented cylinder qualification. SMSTS, IOSH Managing Safely, or NEBOSH General Certificate

Excellent opportunity for an experienced Gas Service & Breakdown Engineer to join a well-established company based in Ferndown, Dorset. Salary: £42,000 - £48,000 per annum Job Type: Full Time / Permanent Are you fully qualified under Gas Safe and have least 5 years' experience with fault-finding on boilers or diagnostic boiler breakdown calls? Are you a confident, competent engineer? Then you are who we are looking for! The Company A successful family run Plumbing & Heating company based in Ferndown, they have built their reputation on reliable, quality work and have teams of engineers completing domestic plumbing, heating, and commercial development projects across the area. They are now looking to offer the position of Gas Engineer to a capable Engineer just like you, to join an expanding Domestic Heating team and existing Gas Safe registered engineers. Benefits Company vehicle, fuel, tools, uniform and pension Competitive rates of pay (based on experience) and the option of private healthcare A friendly work atmosphere and days out/activities periodically throughout the year for staff Employee discount Private dental insurance Private medical insurance As the company covers the BH post code area, applicants must live within this area and be able to work a 1 in 4 weekend rotation for our emergency call out rota. Applicants must be confident in their abilities and be able to show a good understanding of breakdown issues and faults at interview. The company does not have a high turnover of staff, some of their engineers have been with them over 10 years as they know the importance of treating their staff with respect, so if you are looking for a refreshing change in attitude, please apply now for immediate consideration! The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.

Job Type: Contract (temp to perm) Start date: Immediate Industry: Maintenance Location: Manchester City Centre Salary: 21 - 22 per hour JOB DESCRIPTION: HVAC Engineer required for a Facilities Management company to carry out planned and preventative maintenance on a large site in Manchester City Centre. Our client is looking for an experienced and hardworking HVAC Engineer to join the team. This is a long-term secure contract position with the view to going permanent, with opportunities for progression available. This role will be working 8am - 4pm, Monday to Friday (40 hours per week). Daily responsibilities will include: Planned and preventative maintenance on HVAC systems Fault finding, diagnosis, and repair of heating, ventilation, and air conditioning systems Servicing AHUs, FCUs, and associated plant Carrying out reactive maintenance as required Ensuring all work is completed safely and in line with regulations Building strong working relationships with clients on site Requirements for the role: NVQ Level 3 in Heating & Ventilation / Air Conditioning (or equivalent) F-Gas certification (essential) Proven experience in a maintenance environment Strong fault-finding and diagnostic skills Ability to work independently and as part of a team What's on offer: Competitive hourly rate of 21 - 22 per hour Long-term work with potential to go permanent Opportunities for progression

Wright engineering are looking to recruit enthusiastic and experienced Fabricators and welders to join our team servicing sites across the UK. This is the perfect opportunity for an enthusiastic and dynamic person to thrive, working within a successful and vibrant team. Overview - Based in one of our 2 workshops in Worksop, we are looking for an enthusiastic and experienced, Plater Welder - Working on a wide variety of work, ranging from, power stations, waste recovery, building product manufacture and quarrying industries. - This is a full time position within the company, with the opportunity, to proceed into higher supervisory positions within the group. - The ideal candidate will be experienced and trained to a good standard of workmanship and ideally, be flexible to work on a variety of material grades including carbon and stainless steels. Package: - Monday to Friday 07:30 - 16:00 (overtime available weekdays & weekends) - £16.89 PH basic rate £22.34 PH overtime after 8 hours worked weekday and Saturdays £33.78 PH overtime all hours worked on Sundays - 25 days holiday plus 8 stats - Loyalty bonus - Pension - Fully paid training packages The skills required are: - Experience of working on medium to heavy engineering fabrications. - Reading of, engineering GAs and detailed drawings, to a high standard. - Marking out, drilling, cutting, bending rolling and various types of welding. - All welding will be qualified and tested to our standards in house. - Plant operations such as MEWP, Loadall, forklift truck, would be of benefit but not essential, training can be given if required. - The role could involve the odd day on site, which would see an uplift in the hourly rates accordingly, this is very rare, but may occur. APPLY NOW

Wright engineering are looking to recruit enthusiastic and experienced Fabricators and welders to join our team servicing sites across the UK. This is the perfect opportunity for an enthusiastic and dynamic person to thrive, working within a successful and vibrant team. Overview - Based in one of our 2 workshops in Worksop, we are looking for an enthusiastic and experienced, Plater Welder - Working on a wide variety of work, ranging from, power stations, waste recovery, building product manufacture and quarrying industries. - This is a full time position within the company, with the opportunity, to proceed into higher supervisory positions within the group. - The ideal candidate will be experienced and trained to a good standard of workmanship and ideally, be flexible to work on a variety of material grades including carbon and stainless steels. Package: - Monday to Friday 07:30 - 16:00 (overtime available weekdays & weekends) - 15.33 PH basic rate 22.99 PH overtime after 8 hours worked weekday and Saturdays 30.66 PH overtime all hours worked on Sundays - 25 days holiday plus 8 stats - Loyalty bonus - Pension - Fully paid training packages The skills required are: - Experience of working on medium to heavy engineering fabrications. - Reading of, engineering GAs and detailed drawings, to a high standard. - Marking out, drilling, cutting, bending rolling and various types of welding. - All welding will be qualified and tested to our standards in house. - Plant operations such as MEWP, Loadall, forklift truck, would be of benefit but not essential, training can be given if required. - The role could involve the odd day on site, which would see an uplift in the hourly rates accordingly, this is very rare, but may occur. APPLY NOW

Job Position: Principal Geo-environmental Engineer Location: Croydon Salary: 47,000 - 55,000 Hybrid working We are looking for a highly skilled Principal Geo-environmental Engineer who is based near Croydon to join a successful ground investigation consultancy, with a close-knit team and a wide range of contaminated land projects. No two days are the same in this position! You will have the chance to mentor a team and be part of the technical support for environmental projects across the South East. This Principal Geo-environmental Engineer position offers: Generous salary 47,000 - 55,000 (based on experience) Hybrid working Good pension scheme Support to become chartered Annual Bonus Flexible benefits Career progression Team management Client relationship building Annual Bonuses Your Principal Geo-environmental Engineer duties will include: Technical Leadership & Reporting: Preparing and reviewing complex Phase 1 Desk Studies, Phase 2 intrusive investigation reports, remediation strategy designs, and verification reports. Project Management & Delivery: Managing project budgets, schedules, and multidisciplinary teams to ensure high-quality deliverables. Site Investigation Design: Planning and supervising ground investigations, including soil/rock logging to BS5930, trial pitting, boreholes, and sampling. Risk Assessment: Developing conceptual site models and conducting quantitative risk assessments for human health, groundwater, and ground gas. Client & Regulator Liaison: Acting as the primary contact for clients, regulators (e.g., Environment Agency, Local Authorities), and stakeholders. Remediation & Validation: Designing and supervising ground remediation, material management plans (MMP), and waste classification. Mentoring & Business Development: Providing technical guidance to junior staff, preparing fee proposals, and securing new work. Our ideal Principal geo-environmental Engineer will have extensive contaminated land experience and be chartered. (full support to chartership is available). If you are based near Croydon, hold a UK driving licence, with the full right to work permanently in the UK and fit the above criteria, please apply now!Interested in this or other geo roles? Please do not hesitate to contact Joel Bullen at Penguin Recruitment. We have many more vacancies available on our website. This is a permanent role. Penguin Recruitment is operating as a Recruitment Agency in respect to this position.

J ob Title: Geo-environmental Engineer Location: Gateshead Salary: 30,000 - 35,000 This is an excellent opportunity for a geo-environmental engineer to join a well-established Gateshead based environmental consultancy with expansion plans who work on a wide range of technically challenging projects. You will be part of a ground investigation team who offe exciting contaminated land projects and the training required to further develop your geo-environmental engineer skills. Geo-environmental Engineer package: Competitive salary 30,000 - 35,000 Hybrid working available Generous pension scheme Fantastic working conditions Flexible benefits Close support from seniors Full training Wide range of projects Gateshead office Company vehicle Your geo-environmental engineer duties will include: Site Investigation & Supervision: Overseeing onsite investigations, including drilling, trial pitting, and in-situ testing. Contamination Assessment: Assessing soil, groundwater, and ground gas data to identify contamination risks. Reporting: Producing Phase 1 Desk Studies, Phase 2 intrusive reports, and Remediation Strategies. Remediation Design & Management: Designing and supervising cleanup works to manage pollution, such as managing materials and earthworks on brownfield sites. Data Analysis & Modeling: Using software to develop conceptual site models to identify hazards and risks. Compliance & Risk Management: Ensuring projects adhere to environmental regulations, planning conditions, and health and safety legislation. Client & Stakeholder Communication: Collaborating with contractors, regulators, and clients to provide technical solutions and manage land quality issues. To be considered, you need to have a strong background of geology (including a geology related degree), experience in contaminated land projects and a full UK driving licence. Interested in this or other geo roles? Please do not hesitate to contact Joel Bullen at Penguin Recruitment. We have many more vacancies available on our website. This is a permanent role. Penguin Recruitment is operating as a Recruitment Agency in respect to this position.

Geoenvironmental Engineer - Basingstoke Salary: 33,000 - 42,000 Ref: (phone number removed) A specialist environmental and geotechnical consultancy is seeking a Geoenvironmental Engineer to join their growing team in Basingstoke. Operating across London and the South of England, this consultancy delivers high-quality ground investigation and contaminated land solutions to developers, engineers and local authorities, with a strong focus on sustainability and project approval. This is an excellent opportunity for a Geoenvironmental Engineer to join a collaborative, people-focused business known for its "one team" culture and commitment to delivering projects on time and on budget. The Role As a Geoenvironmental Engineer , you will be involved in: Phase 1 desk studies and environmental risk assessments Intrusive site investigations and data collection (soil, groundwater, gas) Risk assessments (GQRA/DQRA) and reporting Supporting remediation strategies and validation works Liaising with clients, regulators and internal teams What's on Offer Competitive salary ( 33,000 - 42,000) and benefits package Structured training and mentoring from experienced engineers Supportive, collaborative team environment Exposure to varied and technically challenging projects Clear progression opportunities within a growing consultancy Requirements Experience in contaminated land / geoenvironmental engineering Degree in geology, environmental science or related field Strong report writing and communication skills Full UK driving licence Full right to work in the UK Must live in or near Basingstoke This Geoenvironmental Engineer role offers the chance to develop within a forward-thinking consultancy where people and quality are at the core of everything they do. If you are interested in this or other Geotechnical Engineering/Consulting roles please do not hesitate to contact Beth Young on (url removed). We have many more vacancies available on our website. Please refer to (url removed). This is a permanent role. Penguin Recruitment is operating as a Recruitment Agency in respect to this position.

Role: Assembly Operative Rate of pay: 14.39 p/h + holiday's (33 days) (rate equivalent to 28,060.50) Site :- Stonehouse, GL10 Hours: - 7am - 3pm (or 8-4pm) Monday to Friday (overtime paid at overtime rates) Duration:- 12 month rolling contract An additional quarterly bonus of 150 is paid for full attendance. (an extra 600 annually) Due to an increase in workload our client is seeking 2 Assembler's to join their friendly team based in Stonehouse. Assembly Operative: The work will typically be done manually or by using light hand tools. Duties include: Correct use of machinery and equipment on the shop floor Ability to read diagrams and instructions for assembly of products, systems, and panels. Conduct all types of assembly work to produce a semi-finished or final product. Soldering, wiring up and general bench assembly of small components Background: You should have prior assembly experience, ideally electronic assembly Must be able to work as part of a team Good timekeeping, reliability and attendance required With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.

Plumbing, Gas & Renewables Trainer Assessor / IQA Hoddesdon 48,000 + Excellent Benefits + Monday-Friday + Progression Opportunities Excellent opportunity for an experienced Trainer Assessor to join a high-performing, well-invested training centre where you'll play a key role in developing future engineers, benefit from an empowered working environment, and have clear progression into leadership or Lead IQA roles. This is a rare opportunity to join a leading, well-established training provider-widely regarded as one of the top commercial gas training centres in the industry. With achievement rates around 30% higher than the national average, they pride themselves on delivering exceptional quality and maintaining incredibly high standards across everything they do. They've heavily invested in their facilities, including modern workshops, commercial gas training environments, and cutting-edge renewable technologies such as heat pumps-ensuring learners receive industry-leading training. This is a business with a clear vision, strong leadership, and a genuine commitment to growth, where every employee plays a key role in shaping the future. In this role, you'll deliver and assess Level 3 learners across plumbing, gas and renewables, while also supporting internal quality assurance processes. You'll work with a manageable caseload, helping learners build portfolios, achieve qualifications, and progress into industry with confidence. This position would suit someone with at least 2 years' experience in a training and assessing role, ideally with an IQA qualification-or someone keen to gain it, as full support and development will be provided. What really sets this opportunity apart is the environment-relaxed, supportive, and empowering. This is a place where quality comes first, people are trusted, and you're given the autonomy to deliver your best work without unnecessary pressure. You'll also have clear progression routes into Lead IQA or wider leadership roles, making it ideal for someone looking to build a long-term career in education and training. The Role: Deliver training, assessment, and support to Level 3 plumbing, gas and renewables learners Carry out assessments, observations, and professional discussions Support learners in building high-quality portfolios of evidence Contribute to internal quality assurance processes and standards Maintain accurate documentation in line with awarding body requirements Manage your own caseload and support learner achievement and progression Work collaboratively with colleagues to maintain high delivery standards The Person: Background in plumbing, gas or renewables (Level 3 qualified or above) Gas qualifications (CCN1 / Gas Safe) Minimum 2 years' experience in a training and assessing role A1/CAVA Assessor qualification (essential) IQA qualification (desirable-but training can be provided) Passion for developing others and delivering high-quality training Strong communication and organisational skills Full UK driving licence Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

Refrigeration Engineer East Midlands Join our clients long-established in-house refrigeration team with decades of expertise, where your work genuinely matters. You ll play a vital role in keeping stores operational by maintaining and repairing critical refrigeration systems that customers rely on every day. Our client is looking for a hands-on refrigeration and air conditioning engineers who enjoy solving problems and working independently. Ideally you will have experience in supermarkets, commercial refrigeration, HVAC, transport refrigeration, or chillers What You ll Be Responsible For Maintaining and repairing refrigeration assets within key stores Display cases, freezers, cold rooms Chillers, packs, condensers Diagnosing faults using engineering expertise and monitoring systems Completing compliance paperwork accurately and efficiently Supporting store operations by reducing downtime and repeat visits Skills & Qualifications NVQ Level 2/3 (or equivalent experience) in Refrigeration & Air Conditioning F-Gas Category 1 certification Strong electrical and mechanical diagnostic skills Customer-focused mindset and ability to work independently Full UK driving licence Salary & Package 43-45k + £2500 Standby + OT Fully-spec d company van (private use option), fuel card 15% company discount, 30% Individual Restaurants discount. Tools, uniform, laptop Access to paid parking apps 33 days holiday, increasing with service up to 38 days (including bank holidays) Pension and private healthcare Generous employee discounts Ongoing training, set store allocations, and defined working areas to support work-life balance Opt in or opt out of the personal use on the van

£65,000 to £70,000 on the books as your base - no CIS, no umbrella, and overtime on top of that. A straight employed salary at a level most install engineers in London are only seeing on self-employed rates. The more interesting detail is what you'll be learning while you're earning it. The business is the sole UK distributor for a water-cooled system that appears on no other UK job spec. It's built for environments where a standard outdoor unit isn't an option - heritage buildings, planning-restricted urban sites, locations with no suitable external space. Engineers who develop expertise on it here can't find that experience anywhere else in the country. What's in it for you £65,000 to £70,000 basic salary Company van with fuel card Phone, tablet, uniform, PPE and specialist tools provided Expenses paid weekly - not at month-end 23 days holiday plus bank holidays plus your birthday off, rising to 30 days over time Overtime paid above 50 hours a week Travel over an hour each way paid additionally What you'll be doing Install-led work across London and the South East - splits, multi-splits and air-to-air across commercial sites, schools, data centres and high-end central London residential. You'll manage your own day and take jobs from start to completion without needing to check in at each step. Site is where you'll spend most of your time - you'll rarely need to come into the office. The pipeline is strong and the workload is consistent. When demand requires it, you'll flex into service and fault-finding - but install is the primary focus, and reactive support is the exception. What you'll need F Gas Level 2 is essential - without it the process won't go further. Solid install experience across splits, multi-splits and general air-to-air. Panasonic or Fujitsu background is useful. Full UK driving licence. Water-cooled system experience isn't required and it won't come up at interview. Any wet-side or plumbing background is worth mentioning, but it's not a condition of the role. What next? If this sounds like the right fit, send over your CV - doesn't need to be perfect. Everything starts with a confidential conversation. Your details won't go anywhere near the client without your agreement.

If you re a mission critical installation engineer CRAC units, VRV/VRF systems, pipework, commissioning and you ve spent the bulk of your career on installation rather than service, here s a role worth reading about. Is this you? You ve been doing installation work long enough to know the difference between a good project and a grinding one. You re comfortable on live-site CDM jobs permits, RAMS, working to drawing and you don t need someone looking over your shoulder. What you probably want is a step forward: better projects, a clearer path, and a package that reflects what you re worth. What a mission critical installation engineer actually does here Around 90% of jobs are in live critical environments and the scale is serious. The team installed the back end of 24 CRAC units last year, alongside VRV programmes and chiller projects. Recent work includes 900kW chiller replacements involving crane lifts and 1.2MW water-cooled chiller installs. That s the level you d be operating at. Day to day: installing CRAC units, VRV/VRF systems, running and brazing refrigerant pipework, commissioning to manufacturer standard, and working within CDM-regulated frameworks on larger jobs. A project manager handles the programme you focus on the engineering. There s also a clear route forward. The intention is to develop the right person into a Project Supervisor position CDM responsibility, subcontractor oversight, currently paying £65k. They d rather build someone into it than hire externally. Prove yourself in the first six months and that conversation happens naturally. Where you ll be doing it A specialist mission-critical cooling business with over 20 years in the sector. Around 80% of revenue comes from the data-centre market. Seven consecutive RoSPA Gold Medals for health and safety unusual for a business of around 50 people, and it tells you something about how the place is run. Engineers are known by name here. It isn t a volume contractor. What you ll get £58,000 £63,000 basic depending on experience High-spec van for personal use plus fuel card 50-hour Monday to Friday week door-to-door travel paid on top when working late from home No call-out obligation 25 days holiday plus 8 bank holidays, with an extra day after 5 years Private medical insurance after probation Annual OEM and manufacturer training Phone and tablet supplied To be considered as a mission critical installation engineer at this level you ll need genuine depth in CRAC and/or VRV/VRF not a service background. F-Gas Category 1 and a relevant C&G or NVQ. Comfortable in live critical environments where PTW and RAMS are standard. What next? Hit the apply button below. Your CV doesn t need to be up to date send what you have and we ll take it from there.