Mobile Plant Fitter £43853 per Year Permanent Location: Telford Recycling About The Role At AO Recycling, we are committed to extracting as much value as possible from the waste electrical and electronic equipment (WEEE) that is thrown away by UK households every year. We are growing rapidly and so with that, opportunities to develop and try new approaches become aplenty. If you are an energetic, hands on, innovative and professional, this is the environment for you. Our fridge recycling plant is one the most efficient and advanced in the UK and It sets a new standard in recovering metals, plastics, and gases. We use cross flow shredders to dismantle fridges, whilst safely extracting and treating the flammable gasses and CFCs through our cryo-condap solvent recovery plant. Ferrous and non-ferrous metals are recovered as well as plastics, and polyurethane foam. The whole process is fully automated and done using a series of screens, magnetic separators, and air classifiers. The plant produces high quality recycled products and complies with the highest European environmental standards. An exciting opportunity has arisen for a Mobile Plant Fitter that predominately carries out repairs and maintenance to our fleet of 36 forklift trucks in Telford. This role also provides welding and fabrication services, and general maintenance to an array of waste recycling machines. The successful candidate will work on a 4 on 4 off shift pattern on days and nights . Here's What You Can Expect To Be Doing No two days are ever the same at AO Recycling, but here's a taste of what you'll get up to: Carry out repair and maintenance on mobile plant and site infrastructure, as planned or directed by site management, including mechanical engineering, fabrication, and welding tasks Plan and deliver corrective and reactive work, making sure tools, parts and materials are available, minimising production downtime, upholding the highest safety standards, and maintaining tidy work areas through a 'clean as you go' approach at all times Ensure the equipment used to undertake welding, fabrication or other service work is in good working order and serviced as required. Must have a solid understanding of all hot work activities and welding accessories Ensure that all plant and equipment on site is modified and improved, as necessary, to maximise equipment availability and performance whilst still achieving output levels required to meet production demands. Complete dynamic risk assessments where necessary to ensure that safe working practices are upheld, and risk reduced Be aware of stock control and maintain shift paperwork to the highest standard, to complete condition reports and other documentation as defined by the maintenance strategy Assess malfunctioning equipment and provide advice to the site management team to support and influence decision-making Carry out engineering project work and assist with new installations or refurbishments to ensure high-quality, reliable operational performance Update and administer the Computerised Maintenance Management System (CMMS) while completing Planned Maintenance inspections in line with the site maintenance plan, ensuring all work is carried out safely and effectively. Contribute to problem solving workshops, providing engineering expertise to identify root causes of failures and subsequent improvement actions Attend daily operational review meetings, providing updates on Planned Maintenance compliance, live defects, and ongoing improvement plans Complete dynamic risk assessments and adopt a 'clean-as-you-go' approach to keep our plant super safe A Few Things About You Experienced and qualified engineer with mobile plant repairs, welding, fabrication, mechanical bias. Ability to provide solutions to real time problems from concept, build to installation. High attention to detail with high standards of work. Excellent communicator, both written and verbal. Highly organised and able to plan and prioritise workloads. Understanding of safe systems of work. I.e., Plant isolations and safety systems Computer literate and familiar with Microsoft office systems. Knowledge of CMMS systems. Driven and self-motivated. Good communicator. Ability to work on own initiative or part of a team. Our Benefits Our benefits are designed to cover the moments that matter to AOers. From health and wellness to giving back - you'll be rewarded inside and outside of work. Holidays; 21 days holiday (inclusive of bank holidays) Pension; Contribute 5% of your annual salary and we'll do the same, giving you a little extra support for the future. Be a VIP at the AO Arena; we have loads of opportunities to win free tickets and pre-sale access! Health & wellbeing; discounted gym membership, and our scheme giving you access to virtual GP's, Mental Health support and much more. Discounts; exclusive discounts across our product range. Family leave; Enhanced Maternity, Paternity and Adoption leave. Making a difference; 2 fully paid days a year to donate your time to any charity of your choice. Free Food Thursday - Last Thursday of every month, lunch is on us as a way of saying thank you for your efforts! To see all our benefits and perks, visit our AO Benefits page.
Mar 05, 2026
Full time
Mobile Plant Fitter £43853 per Year Permanent Location: Telford Recycling About The Role At AO Recycling, we are committed to extracting as much value as possible from the waste electrical and electronic equipment (WEEE) that is thrown away by UK households every year. We are growing rapidly and so with that, opportunities to develop and try new approaches become aplenty. If you are an energetic, hands on, innovative and professional, this is the environment for you. Our fridge recycling plant is one the most efficient and advanced in the UK and It sets a new standard in recovering metals, plastics, and gases. We use cross flow shredders to dismantle fridges, whilst safely extracting and treating the flammable gasses and CFCs through our cryo-condap solvent recovery plant. Ferrous and non-ferrous metals are recovered as well as plastics, and polyurethane foam. The whole process is fully automated and done using a series of screens, magnetic separators, and air classifiers. The plant produces high quality recycled products and complies with the highest European environmental standards. An exciting opportunity has arisen for a Mobile Plant Fitter that predominately carries out repairs and maintenance to our fleet of 36 forklift trucks in Telford. This role also provides welding and fabrication services, and general maintenance to an array of waste recycling machines. The successful candidate will work on a 4 on 4 off shift pattern on days and nights . Here's What You Can Expect To Be Doing No two days are ever the same at AO Recycling, but here's a taste of what you'll get up to: Carry out repair and maintenance on mobile plant and site infrastructure, as planned or directed by site management, including mechanical engineering, fabrication, and welding tasks Plan and deliver corrective and reactive work, making sure tools, parts and materials are available, minimising production downtime, upholding the highest safety standards, and maintaining tidy work areas through a 'clean as you go' approach at all times Ensure the equipment used to undertake welding, fabrication or other service work is in good working order and serviced as required. Must have a solid understanding of all hot work activities and welding accessories Ensure that all plant and equipment on site is modified and improved, as necessary, to maximise equipment availability and performance whilst still achieving output levels required to meet production demands. Complete dynamic risk assessments where necessary to ensure that safe working practices are upheld, and risk reduced Be aware of stock control and maintain shift paperwork to the highest standard, to complete condition reports and other documentation as defined by the maintenance strategy Assess malfunctioning equipment and provide advice to the site management team to support and influence decision-making Carry out engineering project work and assist with new installations or refurbishments to ensure high-quality, reliable operational performance Update and administer the Computerised Maintenance Management System (CMMS) while completing Planned Maintenance inspections in line with the site maintenance plan, ensuring all work is carried out safely and effectively. Contribute to problem solving workshops, providing engineering expertise to identify root causes of failures and subsequent improvement actions Attend daily operational review meetings, providing updates on Planned Maintenance compliance, live defects, and ongoing improvement plans Complete dynamic risk assessments and adopt a 'clean-as-you-go' approach to keep our plant super safe A Few Things About You Experienced and qualified engineer with mobile plant repairs, welding, fabrication, mechanical bias. Ability to provide solutions to real time problems from concept, build to installation. High attention to detail with high standards of work. Excellent communicator, both written and verbal. Highly organised and able to plan and prioritise workloads. Understanding of safe systems of work. I.e., Plant isolations and safety systems Computer literate and familiar with Microsoft office systems. Knowledge of CMMS systems. Driven and self-motivated. Good communicator. Ability to work on own initiative or part of a team. Our Benefits Our benefits are designed to cover the moments that matter to AOers. From health and wellness to giving back - you'll be rewarded inside and outside of work. Holidays; 21 days holiday (inclusive of bank holidays) Pension; Contribute 5% of your annual salary and we'll do the same, giving you a little extra support for the future. Be a VIP at the AO Arena; we have loads of opportunities to win free tickets and pre-sale access! Health & wellbeing; discounted gym membership, and our scheme giving you access to virtual GP's, Mental Health support and much more. Discounts; exclusive discounts across our product range. Family leave; Enhanced Maternity, Paternity and Adoption leave. Making a difference; 2 fully paid days a year to donate your time to any charity of your choice. Free Food Thursday - Last Thursday of every month, lunch is on us as a way of saying thank you for your efforts! To see all our benefits and perks, visit our AO Benefits page.
Are you an experienced Mechanical Maintenance Fitter looking to take your career to the next level? Our client in Northumberland is seeking a Heavy Plant Fitter to join their dynamic maintenance team, where every day brings new challenges and opportunities! About the Role: We are on the lookout for an experience Maintenance Fitter who is passionate about keeping machinery in top condition. You'll be working with a diverse range of cargo handling equipment, including Forklift Trucks (FLT), cranes, and heavy plant machinery. Your expertise in servicing and repairing these vital tools will be invaluable to our operations! Key Responsibilities: Perform regular servicing and maintenance on various cargo handling equipment. Troubleshoot and repair mechanical issues efficiently. Assist with loading and unloading of cargo, ensuring the smooth operation of port activities. Learn and engage in all aspects of Stevedoring, including operating plant and equipment as required. Be flexible and maintain a can-do attitude in a fast-paced environment. What We're Looking For: Proven experience as a Mechanical Maintenance Fitter, especially with FLT, cranes, and heavy plant. A flexible approach to work, including availability for shifts and weekends. A full driving licence is essential, as our operations span across four sites. A proactive and positive attitude towards teamwork and problem-solving. What's on Offer: Competitive salary ranging from £32K to £45K, including bonus and overtime. A private medical scheme to keep you and your family healthy. A generous pension plan to secure your future. Enjoy a well-deserved break with 33 days of holiday (including statutory days). Participate in our annual bonus scheme, rewarding your hard work and dedication! Day shift Why Join? We believe that our employees are our greatest asset. You'll be part of a supportive team that values your contributions and fosters professional growth. We encourage a culture of learning and collaboration, ensuring you have the resources and opportunities to thrive in your role. If you're ready to make a difference and contribute to a thriving environment, we want to hear from you! How to Apply: Ready to embark on this exciting journey? Send your CV and a cover letter outlining your relevant experience Don't miss out on the chance to join our enthusiastic team and elevate your career! Join us and be part of something great at the Port of Blyth! Your future begins here! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Mar 04, 2026
Full time
Are you an experienced Mechanical Maintenance Fitter looking to take your career to the next level? Our client in Northumberland is seeking a Heavy Plant Fitter to join their dynamic maintenance team, where every day brings new challenges and opportunities! About the Role: We are on the lookout for an experience Maintenance Fitter who is passionate about keeping machinery in top condition. You'll be working with a diverse range of cargo handling equipment, including Forklift Trucks (FLT), cranes, and heavy plant machinery. Your expertise in servicing and repairing these vital tools will be invaluable to our operations! Key Responsibilities: Perform regular servicing and maintenance on various cargo handling equipment. Troubleshoot and repair mechanical issues efficiently. Assist with loading and unloading of cargo, ensuring the smooth operation of port activities. Learn and engage in all aspects of Stevedoring, including operating plant and equipment as required. Be flexible and maintain a can-do attitude in a fast-paced environment. What We're Looking For: Proven experience as a Mechanical Maintenance Fitter, especially with FLT, cranes, and heavy plant. A flexible approach to work, including availability for shifts and weekends. A full driving licence is essential, as our operations span across four sites. A proactive and positive attitude towards teamwork and problem-solving. What's on Offer: Competitive salary ranging from £32K to £45K, including bonus and overtime. A private medical scheme to keep you and your family healthy. A generous pension plan to secure your future. Enjoy a well-deserved break with 33 days of holiday (including statutory days). Participate in our annual bonus scheme, rewarding your hard work and dedication! Day shift Why Join? We believe that our employees are our greatest asset. You'll be part of a supportive team that values your contributions and fosters professional growth. We encourage a culture of learning and collaboration, ensuring you have the resources and opportunities to thrive in your role. If you're ready to make a difference and contribute to a thriving environment, we want to hear from you! How to Apply: Ready to embark on this exciting journey? Send your CV and a cover letter outlining your relevant experience Don't miss out on the chance to join our enthusiastic team and elevate your career! Join us and be part of something great at the Port of Blyth! Your future begins here! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Ernest Gordon Recruitment Limited
Edinburgh, Midlothian
Workshop Fitter (Plant) £35,000 - £37,000 + Bonus + Overtime + Training + Company Benefits Edinburgh Are you a Plant Fitter / Engineer looking for a local, stable and static role within a well established and profitable business, offering a permanent and long term position with excellent work-life balance and great benefits? In this hands-on role, you will be maintaining, repairing, and servicing a variety of Heavy Plant Machinery including rollers, excavator's dumpers and compressors, ensuring all machinery performs at optimal level. Joining the workshop as one of the companies' technical experts you will be troubleshooting and fault finding on all relative equipment. Founded over 50 years ago, this family run business specialise all aspects of hire for the construction industry. Stretching their business across the UK, they are market leaders in hire for high quality plant, accommodation, and vehicles. With ambitions to grow further across the UK, potential to progress your career is endless. This role would suit a Workshop Fitter or similar looking for a stable and static within a well established business offering a great work life balance. The Role: Servicing, maintaining and repairing a range of plant machinery Fault finding and troubleshooting technical issues Monday to Friday, 7:30am - 4:30pm The Person: Plant Fitter / Engineer Mechanical background Reference Number: BBBH23820a Engineering, Plant, Engineer, Heavy, Maintenance, Maintain, Repairs, Inspections, Faults, telehandlers, chippers, road, rollers, static, inspect, install, installation, repair, repairing, Edinburgh If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.
Mar 04, 2026
Full time
Workshop Fitter (Plant) £35,000 - £37,000 + Bonus + Overtime + Training + Company Benefits Edinburgh Are you a Plant Fitter / Engineer looking for a local, stable and static role within a well established and profitable business, offering a permanent and long term position with excellent work-life balance and great benefits? In this hands-on role, you will be maintaining, repairing, and servicing a variety of Heavy Plant Machinery including rollers, excavator's dumpers and compressors, ensuring all machinery performs at optimal level. Joining the workshop as one of the companies' technical experts you will be troubleshooting and fault finding on all relative equipment. Founded over 50 years ago, this family run business specialise all aspects of hire for the construction industry. Stretching their business across the UK, they are market leaders in hire for high quality plant, accommodation, and vehicles. With ambitions to grow further across the UK, potential to progress your career is endless. This role would suit a Workshop Fitter or similar looking for a stable and static within a well established business offering a great work life balance. The Role: Servicing, maintaining and repairing a range of plant machinery Fault finding and troubleshooting technical issues Monday to Friday, 7:30am - 4:30pm The Person: Plant Fitter / Engineer Mechanical background Reference Number: BBBH23820a Engineering, Plant, Engineer, Heavy, Maintenance, Maintain, Repairs, Inspections, Faults, telehandlers, chippers, road, rollers, static, inspect, install, installation, repair, repairing, Edinburgh If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.
Contract PSV Engineer Are you looking for ongoing opportunities as a PSV Engineer and to develop your skillset? Why work as a Venatu Contractor? Wages paid weekly. Roles inside and outside of IR35. Local work wherever possible, as well as national opportunities, short and long-term contracts available. Developing your skill set, training courses subject to meeting the criteria. Technical backup from a qualified engineer. What you will be doing as the PSV Engineer: Carry out repair and maintenance to exceed DVSA standards. Diagnostics and repair of mechanical faults including steering, brakes, air systems, driveline but not limited to. Diagnostics and repair of electrical, and body systems. Use diagnostic equipment to assist diagnostics. Routine inspection and servicing to maintain roadworthiness and MOT standards. Carry out major unit changes and repairs where applicable. Complete necessary paperwork including service sheets to a good standard. Meet and work to site health and safety requirements, work to customers SOPs. Qualifications and experience requirements for the PSV Engineer role: Recognised apprenticeship or proven work history. City and Guilds / NVQ level 3 minimum. 5 years workshop experience in similar roles. Additional qualifications in specialist diagnostics, electrical repair, mechanical repair and welding would be advantageous. Does this sound like the PSV Engineer role for you, Apply Today! Venatu Contracting Services is a specialist division here at Venatu Recruitment Group, we focus on the recruitment of talent across the UK. If you feel you match the desired criteria, or you would like more information on roles such as Commercial Vehicle Technician, PSV Engineer, PSV Mechanic or Fitter, we would really like to hear from you. Alternatively, please visit our website. At Venatu Recruitment Group your right to privacy is important to us. By applying for this job, your information will be entered into our recruitment system. This will enable you to register for job alerts, apply for jobs and for us to help you find your next role. To read our full privacy policy please visit our website.
Mar 04, 2026
Contractor
Contract PSV Engineer Are you looking for ongoing opportunities as a PSV Engineer and to develop your skillset? Why work as a Venatu Contractor? Wages paid weekly. Roles inside and outside of IR35. Local work wherever possible, as well as national opportunities, short and long-term contracts available. Developing your skill set, training courses subject to meeting the criteria. Technical backup from a qualified engineer. What you will be doing as the PSV Engineer: Carry out repair and maintenance to exceed DVSA standards. Diagnostics and repair of mechanical faults including steering, brakes, air systems, driveline but not limited to. Diagnostics and repair of electrical, and body systems. Use diagnostic equipment to assist diagnostics. Routine inspection and servicing to maintain roadworthiness and MOT standards. Carry out major unit changes and repairs where applicable. Complete necessary paperwork including service sheets to a good standard. Meet and work to site health and safety requirements, work to customers SOPs. Qualifications and experience requirements for the PSV Engineer role: Recognised apprenticeship or proven work history. City and Guilds / NVQ level 3 minimum. 5 years workshop experience in similar roles. Additional qualifications in specialist diagnostics, electrical repair, mechanical repair and welding would be advantageous. Does this sound like the PSV Engineer role for you, Apply Today! Venatu Contracting Services is a specialist division here at Venatu Recruitment Group, we focus on the recruitment of talent across the UK. If you feel you match the desired criteria, or you would like more information on roles such as Commercial Vehicle Technician, PSV Engineer, PSV Mechanic or Fitter, we would really like to hear from you. Alternatively, please visit our website. At Venatu Recruitment Group your right to privacy is important to us. By applying for this job, your information will be entered into our recruitment system. This will enable you to register for job alerts, apply for jobs and for us to help you find your next role. To read our full privacy policy please visit our website.
Mobile Plant FitterCroydon (covering south east)£45,000 basicVehicle, 29 days holiday, overtime availability at 1.5x, pension scheme and more OverviewWe are seeking a skilled and dedicated Mobile Plant Fitter to join our team. This is an exciting opportunity to work on a wide range of plant machinery, including excavators, dumpers, telehandlers, rollers, and more. If you are passionate about machinery maintenance and repair, and are looking for a role that offers competitive pay, excellent benefits, and a supportive work environment, we encourage you to apply. Responsibilities Conduct routine maintenance, servicing, and repairs on a variety of plant machinery, including excavators, dumpers, telehandlers, rollers, and other equipment. Diagnose and troubleshoot mechanical, hydraulic, and electrical faults to ensure minimal downtime. Perform inspections to ensure machinery is compliant with safety and operational standards. Maintain accurate records of all work carried out, including parts used and repairs completed. Provide excellent customer service and communicate effectively with clients and team members. Ensure all work is carried out in accordance with health and safety regulations. Travel to various sites as required to perform maintenance and repairs. Qualifications Proven experience as a Mobile Plant Fitter or in a similar role. Strong knowledge of plant machinery, including excavators, dumpers, telehandlers, and rollers. Proficiency in diagnosing and repairing mechanical, hydraulic, and electrical systems. Relevant qualifications in plant maintenance or engineering (NVQ, City & Guilds, or equivalent). Full UK driving license. Ability to work independently and manage time effectively. Strong problem-solving skills and attention to detail. Day-to-Day Start your day at 7:00 AM and work until 5:00 PM, Monday to Friday. Travel to various sites to perform maintenance and repairs on plant machinery. Conduct thorough inspections and ensure all equipment is operating efficiently. Collaborate with team members and clients to address any issues or concerns. Maintain a clean and organized work environment, including your provided vehicle. Benefits Competitive basic salary ranging from £38,000 to £45,000. 29 days of holiday per year. Company-provided vehicle for work purposes. Opportunity for overtime at 1.5x your standard rate. 45-hour work week with consistent hours. Supportive and professional work environment. If you are a motivated and experienced Mobile Plant Fitter looking for a rewarding career, we would love to hear from you. Apply today to join our team and take the next step in your professional journey.SER-IN
Mar 04, 2026
Full time
Mobile Plant FitterCroydon (covering south east)£45,000 basicVehicle, 29 days holiday, overtime availability at 1.5x, pension scheme and more OverviewWe are seeking a skilled and dedicated Mobile Plant Fitter to join our team. This is an exciting opportunity to work on a wide range of plant machinery, including excavators, dumpers, telehandlers, rollers, and more. If you are passionate about machinery maintenance and repair, and are looking for a role that offers competitive pay, excellent benefits, and a supportive work environment, we encourage you to apply. Responsibilities Conduct routine maintenance, servicing, and repairs on a variety of plant machinery, including excavators, dumpers, telehandlers, rollers, and other equipment. Diagnose and troubleshoot mechanical, hydraulic, and electrical faults to ensure minimal downtime. Perform inspections to ensure machinery is compliant with safety and operational standards. Maintain accurate records of all work carried out, including parts used and repairs completed. Provide excellent customer service and communicate effectively with clients and team members. Ensure all work is carried out in accordance with health and safety regulations. Travel to various sites as required to perform maintenance and repairs. Qualifications Proven experience as a Mobile Plant Fitter or in a similar role. Strong knowledge of plant machinery, including excavators, dumpers, telehandlers, and rollers. Proficiency in diagnosing and repairing mechanical, hydraulic, and electrical systems. Relevant qualifications in plant maintenance or engineering (NVQ, City & Guilds, or equivalent). Full UK driving license. Ability to work independently and manage time effectively. Strong problem-solving skills and attention to detail. Day-to-Day Start your day at 7:00 AM and work until 5:00 PM, Monday to Friday. Travel to various sites to perform maintenance and repairs on plant machinery. Conduct thorough inspections and ensure all equipment is operating efficiently. Collaborate with team members and clients to address any issues or concerns. Maintain a clean and organized work environment, including your provided vehicle. Benefits Competitive basic salary ranging from £38,000 to £45,000. 29 days of holiday per year. Company-provided vehicle for work purposes. Opportunity for overtime at 1.5x your standard rate. 45-hour work week with consistent hours. Supportive and professional work environment. If you are a motivated and experienced Mobile Plant Fitter looking for a rewarding career, we would love to hear from you. Apply today to join our team and take the next step in your professional journey.SER-IN
Plumber / Pipefitter - Industrial Projects - Exeter, Devon & South Devon - Long-term work available We are currently looking for an experienced Plumber / Pipefitter to work on industrial projects across Exeter, Devon and South Devon . Projects will be site-based and varied, offering steady work for the right candidate. Duties will include: Installation of industrial pipework (steel, copper, plastic) Plant room and mechanical services installation Reading and working from drawings and schematics Pressure testing and commissioning support Working safely in line with site regulations Requirements: Proven experience as a Plumber / Pipefitter (industrial/commercial preferred) CSCS card (required) Ability to work independently and as part of a team Own tools and PPE Full UK driving licence preferred due to multiple sites If you are interested then please APPLY Now and contact Toby either on or
Mar 04, 2026
Contractor
Plumber / Pipefitter - Industrial Projects - Exeter, Devon & South Devon - Long-term work available We are currently looking for an experienced Plumber / Pipefitter to work on industrial projects across Exeter, Devon and South Devon . Projects will be site-based and varied, offering steady work for the right candidate. Duties will include: Installation of industrial pipework (steel, copper, plastic) Plant room and mechanical services installation Reading and working from drawings and schematics Pressure testing and commissioning support Working safely in line with site regulations Requirements: Proven experience as a Plumber / Pipefitter (industrial/commercial preferred) CSCS card (required) Ability to work independently and as part of a team Own tools and PPE Full UK driving licence preferred due to multiple sites If you are interested then please APPLY Now and contact Toby either on or
Mobile Plant Fitter Wiltshire£45,000 basicVan with personal use, 32 days holiday, overtime paid at 1.5x, sick pay and more OverviewWe are seeking a skilled and dedicated Mobile Plant Fitter to join our team. This is an exciting opportunity to work on a wide range of plant machinery, including excavators up to 50 tons, dumpers, loading shovels, dozers, ADTs, and more. With exposure to a variety of manufacturers such as CAT, Volvo, Komatsu, and others, this role offers a dynamic and rewarding career for the right candidate. Responsibilities Conduct maintenance, servicing, and repairs on a wide range of plant machinery. Diagnose and troubleshoot mechanical and electrical faults efficiently. Ensure all machinery is maintained to the highest standards to minimize downtime. Work on-site and off-site, providing mobile support to clients as required. Maintain accurate records of work completed and parts used. Adhere to health and safety regulations at all times. Provide excellent customer service and represent the company professionally. Qualifications Proven experience as a Plant Fitter or similar role. Strong knowledge of plant machinery, including excavators, dumpers, dozers, and ADTs. Familiarity with manufacturers such as CAT, Volvo, Komatsu, and others. Ability to diagnose and repair mechanical and electrical faults. Full UK driving license. Strong problem-solving skills and attention to detail. Excellent communication and organizational skills. Day-to-Day Travel to client sites to perform maintenance and repairs on plant machinery. Inspect and test equipment to ensure optimal performance. Respond promptly to breakdowns and provide efficient solutions. Collaborate with the team to ensure all tasks are completed on time. Keep the company van stocked with necessary tools and parts. Provide feedback to management on recurring issues and suggest improvements. Benefits Competitive basic salary of £38,000 - £45,000 Company van with personal use included. Generous holiday allowance of 32 days Overtime opportunities paid at 1.5x Sick pay and additional benefits. Opportunity to work with a wide range of machinery and manufacturers. Career development and training opportunities. If you are a motivated and experienced Mobile Plant Fitter looking for a challenging and rewarding role, we would love to hear from you. Apply today to join our team and take the next step in your career!SER-IN
Mar 04, 2026
Full time
Mobile Plant Fitter Wiltshire£45,000 basicVan with personal use, 32 days holiday, overtime paid at 1.5x, sick pay and more OverviewWe are seeking a skilled and dedicated Mobile Plant Fitter to join our team. This is an exciting opportunity to work on a wide range of plant machinery, including excavators up to 50 tons, dumpers, loading shovels, dozers, ADTs, and more. With exposure to a variety of manufacturers such as CAT, Volvo, Komatsu, and others, this role offers a dynamic and rewarding career for the right candidate. Responsibilities Conduct maintenance, servicing, and repairs on a wide range of plant machinery. Diagnose and troubleshoot mechanical and electrical faults efficiently. Ensure all machinery is maintained to the highest standards to minimize downtime. Work on-site and off-site, providing mobile support to clients as required. Maintain accurate records of work completed and parts used. Adhere to health and safety regulations at all times. Provide excellent customer service and represent the company professionally. Qualifications Proven experience as a Plant Fitter or similar role. Strong knowledge of plant machinery, including excavators, dumpers, dozers, and ADTs. Familiarity with manufacturers such as CAT, Volvo, Komatsu, and others. Ability to diagnose and repair mechanical and electrical faults. Full UK driving license. Strong problem-solving skills and attention to detail. Excellent communication and organizational skills. Day-to-Day Travel to client sites to perform maintenance and repairs on plant machinery. Inspect and test equipment to ensure optimal performance. Respond promptly to breakdowns and provide efficient solutions. Collaborate with the team to ensure all tasks are completed on time. Keep the company van stocked with necessary tools and parts. Provide feedback to management on recurring issues and suggest improvements. Benefits Competitive basic salary of £38,000 - £45,000 Company van with personal use included. Generous holiday allowance of 32 days Overtime opportunities paid at 1.5x Sick pay and additional benefits. Opportunity to work with a wide range of machinery and manufacturers. Career development and training opportunities. If you are a motivated and experienced Mobile Plant Fitter looking for a challenging and rewarding role, we would love to hear from you. Apply today to join our team and take the next step in your career!SER-IN
Agriculture / HGV Mechanic (Training on PSVs) £46,000 - £50,000 + 42hr Week + PSV Training + Days Based + Optional Overtime + Company benefits + Auto-Electrical Training Oxford, Oxfordshire Are you a HGV or Agricultural Mechanic looking for a role where you will receive training on PSV's and buses, making you an expert in a stable, days only role with a well-established firm that provides transport solutions for a range of high-status clients across the UK? On offer is the opportunity to work within a stable company established for over 90 years and employs over 40 people where you will have variety to work on different sized vehicles for a range of well-known clients making each day different. In this role you will receive expert training and be expected to carry out preventative maintenance on a fleet of varied vehicles. Your role will include MOT preps, routine gearbox, clutch and turbo changes as well as general maintenance of the fleet. This role would suit an Agriculture / HGV Mechanic or similar looking to become an expert on PSV's and work with a company who invest in their staff through funded training and can provide a stable career. The Role Carrying out routine maintenance and repairs on different sized coaches/ PSV Diagnosing and rectifying all types of PSV faults Monday to Friday, hours based on a 45hr week The Person Qualified Mechanic HGV / PSV / Agriculture / Coaches background Reference Number: BBBH23031a Engineering, Engineer, Mechanic, Mechanical, Fleet, HGV, LGV, PSV, Bus, Coach, Mechanic, Fitter, Maintenance, Oxford, Witney, Bicester, Oxfordshire If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ
Mar 04, 2026
Full time
Agriculture / HGV Mechanic (Training on PSVs) £46,000 - £50,000 + 42hr Week + PSV Training + Days Based + Optional Overtime + Company benefits + Auto-Electrical Training Oxford, Oxfordshire Are you a HGV or Agricultural Mechanic looking for a role where you will receive training on PSV's and buses, making you an expert in a stable, days only role with a well-established firm that provides transport solutions for a range of high-status clients across the UK? On offer is the opportunity to work within a stable company established for over 90 years and employs over 40 people where you will have variety to work on different sized vehicles for a range of well-known clients making each day different. In this role you will receive expert training and be expected to carry out preventative maintenance on a fleet of varied vehicles. Your role will include MOT preps, routine gearbox, clutch and turbo changes as well as general maintenance of the fleet. This role would suit an Agriculture / HGV Mechanic or similar looking to become an expert on PSV's and work with a company who invest in their staff through funded training and can provide a stable career. The Role Carrying out routine maintenance and repairs on different sized coaches/ PSV Diagnosing and rectifying all types of PSV faults Monday to Friday, hours based on a 45hr week The Person Qualified Mechanic HGV / PSV / Agriculture / Coaches background Reference Number: BBBH23031a Engineering, Engineer, Mechanic, Mechanical, Fleet, HGV, LGV, PSV, Bus, Coach, Mechanic, Fitter, Maintenance, Oxford, Witney, Bicester, Oxfordshire If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ
HGV Maintenance Fitter Location: West Thurrock Industry: Chemical / Logistics Are you an experienced HGV Fitter with strong diagnostic skills and ADR knowledge? Do you take pride in maintaining vehicles to the highest safety and compliance standards? We are looking for a skilled HGV Maintenance Fitter to join our busy workshop team, ensuring our fleet of HGV vehicles and trailers remain fully compliant, roadworthy, and safe to serve our loyal customer base. The Role As an HGV Maintenance Fitter, you will be responsible for maintaining and inspecting our fleet in line with VOSA standards , ensuring legal compliance and operational efficiency within the chemical industry. You will play a key role in keeping our vehicles safe, reliable, and ready for delivery at all times. Key Responsibilities Service and inspect all vehicles to VOSA standards Diagnose and rectify mechanical and electrical faults Carry out routine servicing and repairs, including: Brakes Gearboxes Clutch systems Perform breakdown repairs when required Identify and order parts as necessary Maintain accurate records using the company vehicle maintenance system Ensure workshop facilities, tools, and equipment are clean and well maintained Always wear appropriate PPE and adhere to health & safety standards Ensure compliance with ISO standards and all employment obligations Positively represent the company to customers and suppliers Essential Requirements Proven experience in heavy vehicle maintenance, repair, and diagnostics Previous experience working in a busy HGV workshop ADR knowledge and experience (essential) Strong understanding of VOSA compliance standards Ability to work independently and as part of a team High attention to detail and commitment to quality workmanship What We're Looking For A proactive and dependable team member Someone who takes pride in delivering work to the highest standard A professional who understands the importance of compliance within the chemical industry A commitment to safety, documentation accuracy, and continuous improvement Why Join Us? Part of a supportive team in a well-established organisation that prioritises safety, compliance, and long-term customer relationships. If you're ready to bring your expertise to a company that values high standards and technical excellence, we'd love to hear from you. Apply today and keep our fleet moving safely and efficiently.
Mar 04, 2026
Full time
HGV Maintenance Fitter Location: West Thurrock Industry: Chemical / Logistics Are you an experienced HGV Fitter with strong diagnostic skills and ADR knowledge? Do you take pride in maintaining vehicles to the highest safety and compliance standards? We are looking for a skilled HGV Maintenance Fitter to join our busy workshop team, ensuring our fleet of HGV vehicles and trailers remain fully compliant, roadworthy, and safe to serve our loyal customer base. The Role As an HGV Maintenance Fitter, you will be responsible for maintaining and inspecting our fleet in line with VOSA standards , ensuring legal compliance and operational efficiency within the chemical industry. You will play a key role in keeping our vehicles safe, reliable, and ready for delivery at all times. Key Responsibilities Service and inspect all vehicles to VOSA standards Diagnose and rectify mechanical and electrical faults Carry out routine servicing and repairs, including: Brakes Gearboxes Clutch systems Perform breakdown repairs when required Identify and order parts as necessary Maintain accurate records using the company vehicle maintenance system Ensure workshop facilities, tools, and equipment are clean and well maintained Always wear appropriate PPE and adhere to health & safety standards Ensure compliance with ISO standards and all employment obligations Positively represent the company to customers and suppliers Essential Requirements Proven experience in heavy vehicle maintenance, repair, and diagnostics Previous experience working in a busy HGV workshop ADR knowledge and experience (essential) Strong understanding of VOSA compliance standards Ability to work independently and as part of a team High attention to detail and commitment to quality workmanship What We're Looking For A proactive and dependable team member Someone who takes pride in delivering work to the highest standard A professional who understands the importance of compliance within the chemical industry A commitment to safety, documentation accuracy, and continuous improvement Why Join Us? Part of a supportive team in a well-established organisation that prioritises safety, compliance, and long-term customer relationships. If you're ready to bring your expertise to a company that values high standards and technical excellence, we'd love to hear from you. Apply today and keep our fleet moving safely and efficiently.
Mechanical Fitter / Assembly Technician (Cleanroom / Pharmaceutical) Bury (Commutable from Manchester, Rochdale, Oldham, Failsworth, Bolton, Heywood, Farnworth, Middleton, Prestwich, Ramsbottom, Littleborough & surrounding areas) Salary: £30,000 - £33,000 + Overtime + Bonus + Life Assurance + Healthcare Cash Plan + Excellent Company Benefits Hours: Monday-Thursday, 7am-3:30pm Friday, 7am-1pm (38 hours per week) Are you a Skilled Mechanical Fitter or Assembly Technician looking for a stable, rewarding role within a modern manufacturing environment with overtime earning potential? This is an excellent opportunity to join a growing organisation where you'll work on critical, precision-engineered equipment that makes a real impact in the medical and pharmaceutical industries. Based at a clean, purpose-built facility, you'll assemble high-quality containment and clean-air systems used in the production of life-saving treatments and research applications. You'll enjoy excellent working conditions, continuous training, and opportunities to enhance your skills, with the added benefit of enhanced overtime rates and an annual company bonus. The company are at the forefront of their industry and have recently opened a state of the art facility and are undergoing a significant period of growth, making now an exciting time to join. This position would suit a Mechanical Fitter/Assembly Technician looking for a specialist role and career development opportunities. The Role: Assemble precision-engineered containment and safety equipment from technical drawings. Use hand tools, power tools, and static machinery safely and efficiently. Ensure high-quality standards are achieved throughout the build process. The Candidate: Proven experience in mechanical assembly or fitting, ideally within medical, pharmaceutical, aerospace, or precision engineering sectors. Reference Number: BBBH267714 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Patrick Simper at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
Mar 04, 2026
Full time
Mechanical Fitter / Assembly Technician (Cleanroom / Pharmaceutical) Bury (Commutable from Manchester, Rochdale, Oldham, Failsworth, Bolton, Heywood, Farnworth, Middleton, Prestwich, Ramsbottom, Littleborough & surrounding areas) Salary: £30,000 - £33,000 + Overtime + Bonus + Life Assurance + Healthcare Cash Plan + Excellent Company Benefits Hours: Monday-Thursday, 7am-3:30pm Friday, 7am-1pm (38 hours per week) Are you a Skilled Mechanical Fitter or Assembly Technician looking for a stable, rewarding role within a modern manufacturing environment with overtime earning potential? This is an excellent opportunity to join a growing organisation where you'll work on critical, precision-engineered equipment that makes a real impact in the medical and pharmaceutical industries. Based at a clean, purpose-built facility, you'll assemble high-quality containment and clean-air systems used in the production of life-saving treatments and research applications. You'll enjoy excellent working conditions, continuous training, and opportunities to enhance your skills, with the added benefit of enhanced overtime rates and an annual company bonus. The company are at the forefront of their industry and have recently opened a state of the art facility and are undergoing a significant period of growth, making now an exciting time to join. This position would suit a Mechanical Fitter/Assembly Technician looking for a specialist role and career development opportunities. The Role: Assemble precision-engineered containment and safety equipment from technical drawings. Use hand tools, power tools, and static machinery safely and efficiently. Ensure high-quality standards are achieved throughout the build process. The Candidate: Proven experience in mechanical assembly or fitting, ideally within medical, pharmaceutical, aerospace, or precision engineering sectors. Reference Number: BBBH267714 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Patrick Simper at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
Electromechanical Fitters (HV Infrastructure) Location: Coleraine, Northern Ireland Salary: Competitive (DOE) + Premium Benefits Package Contract: Full-time, Permanent Hours: 45 Hours (07:00 - 17:00) Benefits: Company Van & Fuel Card, 33 Days Annual Leave (25 days + 8 public holidays), Comprehensive Pension Scheme, Sick Pay, and Healthcare, Full PPE and high-spec professional tools provided and Clear p
Mar 04, 2026
Full time
Electromechanical Fitters (HV Infrastructure) Location: Coleraine, Northern Ireland Salary: Competitive (DOE) + Premium Benefits Package Contract: Full-time, Permanent Hours: 45 Hours (07:00 - 17:00) Benefits: Company Van & Fuel Card, 33 Days Annual Leave (25 days + 8 public holidays), Comprehensive Pension Scheme, Sick Pay, and Healthcare, Full PPE and high-spec professional tools provided and Clear p
At Breedon Group, we pride ourselves on being one of the leading construction materials companies in the UK and Ireland. We are committed to providing innovative solutions and sustainable materials that contribute to building a future that benefits our communities. Our team is driven by integrity, commitment to excellence, and a passion for making a difference in the construction industry. This role will require you to cover our sites in the East and East Anglia region to attend breakdowns and for preventative maintenance, we will provide a company van for travelling. You will be based at Norwich Concrete Plant with regular travel to other sites. This role is based on 48 hours per week with overtime. Key Responsibilities You will be responsible for developing a preventative maintenance system and carrying out planned maintenance activities to ensure that our concrete plants operate safely and reliably. You will also play a key 'hands on' role in the planning and implementation of plant improvements. You will need to have the ability to quickly fault find and respond to any unplanned plant shutdowns. Assist the area management team in the programming of scheduled maintenance and repair aligned to production requirements and managed the site defect logs. Facilitate and co-ordinate the repair and maintenance of ready mix concrete plants. Eliminate preventable plant breakdowns. Ensure cost effective and timely ordering and supply of spares and critical equipment. Undertake risk assessment and associated paperwork, where required, of the relevant activities to ensure a suitable and effective safe system of work. Liaise daily with management and plant operations team to ascertain any repair and maintenance requirement that arise, or need specific prioritisation. Provide supervision of others and third party's assisting in the works being carried out. Some of your work will involve working with production colleagues on the telephone to understand issues and to provide advice, so your ability to communicate effectively is vital. This is a mobile role and so you will be required to be highly self-motivated and flexible in your approach. You will be provided with a van to travel between sites. The Group places the highest importance on sustained standards of excellence in all aspects of Health, Safety and Environmental management and you will be expected to contribute to the Company's zero harm culture. Skills, Knowledge & Expertise Good understanding of health safety and environmental impacts of role. Experience and understanding of mechanical fitting and maintenance of equipment including conveyors, pumps, pipes, valves, filter systems, pneumatics hydraulics bearings, gear boxes etc. Welding and burning for fabrication and maintenance. Use of pulling and lifting equipment. Experienced in the use of workshop equipment. Mechanical fault finding. Competency in basic Multi Skilling. The Group places the highest importance on sustained standards of excellence in all aspects of Health, Safety and Environmental management and you will be expected to contribute to the Company's zero harm culture. Essential experience working on heavy plant, fixed and/or mobile approach. Ability to remain composed under pressure. Job Benefits A tailored, competitive salary Company Pension Scheme 25 days annual leave, plus bank holidays on top Share Saver Scheme Company Life Assurance Scheme Access to our employee benefits platform, giving you discounts on a wide variety of high street shops and brands Broad learning opportunities and career progression pathways Company Van
Mar 04, 2026
Full time
At Breedon Group, we pride ourselves on being one of the leading construction materials companies in the UK and Ireland. We are committed to providing innovative solutions and sustainable materials that contribute to building a future that benefits our communities. Our team is driven by integrity, commitment to excellence, and a passion for making a difference in the construction industry. This role will require you to cover our sites in the East and East Anglia region to attend breakdowns and for preventative maintenance, we will provide a company van for travelling. You will be based at Norwich Concrete Plant with regular travel to other sites. This role is based on 48 hours per week with overtime. Key Responsibilities You will be responsible for developing a preventative maintenance system and carrying out planned maintenance activities to ensure that our concrete plants operate safely and reliably. You will also play a key 'hands on' role in the planning and implementation of plant improvements. You will need to have the ability to quickly fault find and respond to any unplanned plant shutdowns. Assist the area management team in the programming of scheduled maintenance and repair aligned to production requirements and managed the site defect logs. Facilitate and co-ordinate the repair and maintenance of ready mix concrete plants. Eliminate preventable plant breakdowns. Ensure cost effective and timely ordering and supply of spares and critical equipment. Undertake risk assessment and associated paperwork, where required, of the relevant activities to ensure a suitable and effective safe system of work. Liaise daily with management and plant operations team to ascertain any repair and maintenance requirement that arise, or need specific prioritisation. Provide supervision of others and third party's assisting in the works being carried out. Some of your work will involve working with production colleagues on the telephone to understand issues and to provide advice, so your ability to communicate effectively is vital. This is a mobile role and so you will be required to be highly self-motivated and flexible in your approach. You will be provided with a van to travel between sites. The Group places the highest importance on sustained standards of excellence in all aspects of Health, Safety and Environmental management and you will be expected to contribute to the Company's zero harm culture. Skills, Knowledge & Expertise Good understanding of health safety and environmental impacts of role. Experience and understanding of mechanical fitting and maintenance of equipment including conveyors, pumps, pipes, valves, filter systems, pneumatics hydraulics bearings, gear boxes etc. Welding and burning for fabrication and maintenance. Use of pulling and lifting equipment. Experienced in the use of workshop equipment. Mechanical fault finding. Competency in basic Multi Skilling. The Group places the highest importance on sustained standards of excellence in all aspects of Health, Safety and Environmental management and you will be expected to contribute to the Company's zero harm culture. Essential experience working on heavy plant, fixed and/or mobile approach. Ability to remain composed under pressure. Job Benefits A tailored, competitive salary Company Pension Scheme 25 days annual leave, plus bank holidays on top Share Saver Scheme Company Life Assurance Scheme Access to our employee benefits platform, giving you discounts on a wide variety of high street shops and brands Broad learning opportunities and career progression pathways Company Van
Job Title: Mechanical Fitter Job Location: Kings Heath Depot, Northampton Shifts: Monday-Friday Days Hourly Rate: 18.68 P.A.Y.E. / Pre 12 weeks 23.83 Umbrella / Post 12 weeks 25.11 Umbrella Hours Per Week: 50 Duration: Ongoing (long term contracts) Start Date: July 2025 Company Summary: Working for a leading global provider of mobility solutions for urban interurban, and freight transportation sectors. Position Summary: Working at a newly refurbished depot in Northampton working on large-scale overhaul projects, you will be working with a team of Fitters focussed on refitting the interior of train carriages to modernise the fleet. Responsibilities Include: Use hand tools to drill vehicles to create holes for panels/fixtures and fittings Installation of panelling and vehicle fixtures Collaborate with the quality team to ensure modifications meet design/regulatory standards Use Siemens software/systems to input data and retrieve VMI's Conduct post modification inspections to verify integrity and performance Person Profile: Experience as a Mechanical Fitter/Vehicle Technician/Modifications Technician Be willing to learn new skills and attend training courses to expand on your skillset NVQ Level 3 within a relevant engineering/mechanical discipline Ideally you will have Rolling Stock experience on either interior modifications or as a mechanical fitter We value your unique identity and perspective and are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society. Come bring your authentic self and create a better tomorrow with us! Siemens promote a growth mindset, the self-belief that we can learn and grow, take on new challenges and adapt to change. If you don't match all the criteria for this role but feel you have transferable skills to enable you to succeed, we encourage you to apply.
Mar 04, 2026
Full time
Job Title: Mechanical Fitter Job Location: Kings Heath Depot, Northampton Shifts: Monday-Friday Days Hourly Rate: 18.68 P.A.Y.E. / Pre 12 weeks 23.83 Umbrella / Post 12 weeks 25.11 Umbrella Hours Per Week: 50 Duration: Ongoing (long term contracts) Start Date: July 2025 Company Summary: Working for a leading global provider of mobility solutions for urban interurban, and freight transportation sectors. Position Summary: Working at a newly refurbished depot in Northampton working on large-scale overhaul projects, you will be working with a team of Fitters focussed on refitting the interior of train carriages to modernise the fleet. Responsibilities Include: Use hand tools to drill vehicles to create holes for panels/fixtures and fittings Installation of panelling and vehicle fixtures Collaborate with the quality team to ensure modifications meet design/regulatory standards Use Siemens software/systems to input data and retrieve VMI's Conduct post modification inspections to verify integrity and performance Person Profile: Experience as a Mechanical Fitter/Vehicle Technician/Modifications Technician Be willing to learn new skills and attend training courses to expand on your skillset NVQ Level 3 within a relevant engineering/mechanical discipline Ideally you will have Rolling Stock experience on either interior modifications or as a mechanical fitter We value your unique identity and perspective and are fully committed to providing equitable opportunities and building a workplace that reflects the diversity of society. Come bring your authentic self and create a better tomorrow with us! Siemens promote a growth mindset, the self-belief that we can learn and grow, take on new challenges and adapt to change. If you don't match all the criteria for this role but feel you have transferable skills to enable you to succeed, we encourage you to apply.
Mechanical Fitter Location: Rugby Commutable from: Coventry, Leamington Spa, Daventry, Lutterworth Pay Rate: £19.00 - £20.00 per hour Job Type: Permanent Working Pattern: Hybrid - approx. 50% workshop based and 50% site work About the Company This is an established engineering business specialising in bespoke machinery, automation systems, jigs and fixtures, supporting a range of industrial clients across the UK. The Role This Mechanical Fitter role involves both workshop-based machine builds and on-site installation work. Key responsibilities include: Building and assembling jigs, fixtures, bespoke machinery and automation systems Workshop-based machine builds (approximately 50% of the role) On-site installation and fitting work (approximately 50% of the role) Assembly of steel structures such as platforms, walkways and stairs Working from engineering drawings Supporting installation and commissioning activities Occasional working away and weekend work when required About You To be suitable for this Mechanical Fitter role, you will need: Minimum 3 years' experience in mechanical fitting or machine build environments Competence with pneumatic and hydraulic systems Experience with motion systems Basic understanding of electrical and control systems Experience assembling steel structures (not full construction steel erection) Full UK driving licence Ability to work alone and be self-motivated Flexibility to work away and weekends when required Licences / Certifications FLT licence - desirable MEWP licence - desirable How to Apply To apply for the Mechanical Fitter position, click Apply Now and upload your CV.A member of our recruitment team will contact you to discuss your application and next steps.
Mar 04, 2026
Full time
Mechanical Fitter Location: Rugby Commutable from: Coventry, Leamington Spa, Daventry, Lutterworth Pay Rate: £19.00 - £20.00 per hour Job Type: Permanent Working Pattern: Hybrid - approx. 50% workshop based and 50% site work About the Company This is an established engineering business specialising in bespoke machinery, automation systems, jigs and fixtures, supporting a range of industrial clients across the UK. The Role This Mechanical Fitter role involves both workshop-based machine builds and on-site installation work. Key responsibilities include: Building and assembling jigs, fixtures, bespoke machinery and automation systems Workshop-based machine builds (approximately 50% of the role) On-site installation and fitting work (approximately 50% of the role) Assembly of steel structures such as platforms, walkways and stairs Working from engineering drawings Supporting installation and commissioning activities Occasional working away and weekend work when required About You To be suitable for this Mechanical Fitter role, you will need: Minimum 3 years' experience in mechanical fitting or machine build environments Competence with pneumatic and hydraulic systems Experience with motion systems Basic understanding of electrical and control systems Experience assembling steel structures (not full construction steel erection) Full UK driving licence Ability to work alone and be self-motivated Flexibility to work away and weekends when required Licences / Certifications FLT licence - desirable MEWP licence - desirable How to Apply To apply for the Mechanical Fitter position, click Apply Now and upload your CV.A member of our recruitment team will contact you to discuss your application and next steps.
Location:-Aldershot Job Title:- Vehicle Technician (Level 2) Salary 34,000 + bonus We are recruiting for a Level 2 Light Vehicle Qualified Technician in the Aldershot Area, to join a brilliant Volume Dealership Group. The position is for either an experienced technician looking to wind-back the heavy work, or a sales prep technician to carry out PDI's, services and repairs. This is a top Franchise that train and progress all their Technicians to the top level, and historically they have pushed them all the way up to Master Level/Group Technical level (which you can either take it or leave it). If you are a little bit bored and uninspired, this is your chance. Here are some but not all the benefits:- From 29,000 to 34,000 basic + bonuses 8-5pm - Mon - Fri with 1/4 weekends only 8:30-12:30pm 25 days holiday + bank holiday within a fantastic workshop & team Requirements for Vehicle Technician role 1. A Motor Trade qualification to work on any type of vehicle 2. Driving License 3. Tools to tackle repairs 4. 18 months experience, but open to a conversation around it (Level 2 Light Vehicle is the minimum they can take anyone on) Ready for an upgrade? If you are interested in this position please contact Eric Duxbury at Holt Recruitment. He can tell you everything you need to know about your next move by hitting 'Apply' below. Please note:- if your CV is out of date, don't worry. Apply anyway, we can update it for you. Holt Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter Holt Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments.
Mar 04, 2026
Full time
Location:-Aldershot Job Title:- Vehicle Technician (Level 2) Salary 34,000 + bonus We are recruiting for a Level 2 Light Vehicle Qualified Technician in the Aldershot Area, to join a brilliant Volume Dealership Group. The position is for either an experienced technician looking to wind-back the heavy work, or a sales prep technician to carry out PDI's, services and repairs. This is a top Franchise that train and progress all their Technicians to the top level, and historically they have pushed them all the way up to Master Level/Group Technical level (which you can either take it or leave it). If you are a little bit bored and uninspired, this is your chance. Here are some but not all the benefits:- From 29,000 to 34,000 basic + bonuses 8-5pm - Mon - Fri with 1/4 weekends only 8:30-12:30pm 25 days holiday + bank holiday within a fantastic workshop & team Requirements for Vehicle Technician role 1. A Motor Trade qualification to work on any type of vehicle 2. Driving License 3. Tools to tackle repairs 4. 18 months experience, but open to a conversation around it (Level 2 Light Vehicle is the minimum they can take anyone on) Ready for an upgrade? If you are interested in this position please contact Eric Duxbury at Holt Recruitment. He can tell you everything you need to know about your next move by hitting 'Apply' below. Please note:- if your CV is out of date, don't worry. Apply anyway, we can update it for you. Holt Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries. We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter Holt Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments.
ARE YOU LOOKING FOR A CAREER CHANGE WITH EXCELLENT DEVELOPMENT OPPORTUNITIES? TQ NEEDS YOU TO JOIN OUR TEAM! ABOUT US Tillicoultry Quarries is a successful and fast-growing family-owned quarrying company and major supplier of aggregates, asphalt, ready-mixed concrete, mortar, render and sports sand to the building and road construction industry. We operate in over 35 sites throughout Central Scotland, the Northeast of England and East Anglia. Due to our continued success and rapid growth an excellent opportunity has arisen for a Plant Fitter based in Middlesbrough. The successful candidates should be customer focused, reliable, well organised and be able to work well as part of a team in a busy site environment. This is a mobile role and travelling between plants in the North East. WHY JOIN OUR TEAM? As a family business who have been in operation for over 90 years we invest in our people and offer excellent training and career development opportunities. Our culture has grown from family values and we are proud to have a committed and passionate team of over 400 people working in a variety of different roles delivering a unique combination of quality materials and service excellence for our customers. In addition, we will provide you with the opportunity to gain vocational qualifications within 12 months of starting with us. KEY RESPONSIBILITIES Ensure all duties carried out to Company Health and Safety Policy and Guidelines. Routine Servicing of Mobile and fixed Equipment. Breakdown and defect repair. Fault finding and Diagnosis. Ensure Company vehicles and equipment are maintained in a safe, clean and tidy state. Planned inspection and planned maintenance. WHAT DO WE NEED FROM YOU? Experience in a mechanical background. Experience working in an extractives environment (Sand and gravel) Experience maintaining and repairing concrete and/or asphalt plants is desirable. A qualification in either Plant maintenance/ Agriculture/ Mechanical Engineeringthis can be NVQ /CityGuilds. A Full UK drivers licence Experience maintaining a wide range of heavy earth moving, crushing & screening equipment including Caterpillar, Komatsu, Volvo, Metso, & Finlay. Experience in using burning/ cutting equipment, Welding experience would be an advantage. Excellent communication skills able to communicate effectively in order to achieve results in a fast-paced environment. Excellent problem-solving skills can identify the problem and generate a solution in a timely and cost-effective manner. Flexible approach to work able to go that extra mile when required and revise approach to meet operational requirements. WHAT WE WILL GIVE YOU IN RETURN Competitive salary Enhanced overtime rates Fully funded VQ Pension 30 days annual leave per year Holiday purchase scheme Employee Assistance Programme Employee Discounts Platform Career development and internal progression THIS IS AN EXCITING OPPORTUNITY TO FULFIL A KEY ROLE WITHIN A FAST GROWING AND SUCCESSFUL BUSINESS. WE OFFER A COMPETITIVE REMUNERATION PACKAGE AND FANTASTIC OPPORTUNITIES FOR DEVELOPMENT AND CAREER PROGRESSION. WORKING TOWARDS A DIVERSE WORKFORCE AND EQUAL OPPORTUNITIES. JBRP1_UKTJ
Mar 04, 2026
Full time
ARE YOU LOOKING FOR A CAREER CHANGE WITH EXCELLENT DEVELOPMENT OPPORTUNITIES? TQ NEEDS YOU TO JOIN OUR TEAM! ABOUT US Tillicoultry Quarries is a successful and fast-growing family-owned quarrying company and major supplier of aggregates, asphalt, ready-mixed concrete, mortar, render and sports sand to the building and road construction industry. We operate in over 35 sites throughout Central Scotland, the Northeast of England and East Anglia. Due to our continued success and rapid growth an excellent opportunity has arisen for a Plant Fitter based in Middlesbrough. The successful candidates should be customer focused, reliable, well organised and be able to work well as part of a team in a busy site environment. This is a mobile role and travelling between plants in the North East. WHY JOIN OUR TEAM? As a family business who have been in operation for over 90 years we invest in our people and offer excellent training and career development opportunities. Our culture has grown from family values and we are proud to have a committed and passionate team of over 400 people working in a variety of different roles delivering a unique combination of quality materials and service excellence for our customers. In addition, we will provide you with the opportunity to gain vocational qualifications within 12 months of starting with us. KEY RESPONSIBILITIES Ensure all duties carried out to Company Health and Safety Policy and Guidelines. Routine Servicing of Mobile and fixed Equipment. Breakdown and defect repair. Fault finding and Diagnosis. Ensure Company vehicles and equipment are maintained in a safe, clean and tidy state. Planned inspection and planned maintenance. WHAT DO WE NEED FROM YOU? Experience in a mechanical background. Experience working in an extractives environment (Sand and gravel) Experience maintaining and repairing concrete and/or asphalt plants is desirable. A qualification in either Plant maintenance/ Agriculture/ Mechanical Engineeringthis can be NVQ /CityGuilds. A Full UK drivers licence Experience maintaining a wide range of heavy earth moving, crushing & screening equipment including Caterpillar, Komatsu, Volvo, Metso, & Finlay. Experience in using burning/ cutting equipment, Welding experience would be an advantage. Excellent communication skills able to communicate effectively in order to achieve results in a fast-paced environment. Excellent problem-solving skills can identify the problem and generate a solution in a timely and cost-effective manner. Flexible approach to work able to go that extra mile when required and revise approach to meet operational requirements. WHAT WE WILL GIVE YOU IN RETURN Competitive salary Enhanced overtime rates Fully funded VQ Pension 30 days annual leave per year Holiday purchase scheme Employee Assistance Programme Employee Discounts Platform Career development and internal progression THIS IS AN EXCITING OPPORTUNITY TO FULFIL A KEY ROLE WITHIN A FAST GROWING AND SUCCESSFUL BUSINESS. WE OFFER A COMPETITIVE REMUNERATION PACKAGE AND FANTASTIC OPPORTUNITIES FOR DEVELOPMENT AND CAREER PROGRESSION. WORKING TOWARDS A DIVERSE WORKFORCE AND EQUAL OPPORTUNITIES. JBRP1_UKTJ
Job Description: Job Title: Workshop Plant Fitter Salary: £30,000.00 - £40,000.00 Location: Stratford-Upon-Avon Shift: 42.5hrs Per Week (Mon-Fri Days) Are you a skilled problem-solver who enjoys working with Heavy Plant machinery? Do you take pride in repairing and maintaining equipment to the highest standard? If so, this Plant Fitter role could be perfect for you! What is the Workshop Plant Fitter Job About? As a Plant Fitter, you'll be based in our fully equipped workshop, carrying out servicing, repairs, and inspections on a wide range of plant machinery. You'll work closely with a supportive team, using your technical skills to keep our equipment running safely and efficiently. What Our Next Workshop Plant Fitter Will Be Doing: Servicing, repairing, and maintaining a range of heavy plant equipment. Diagnosing and fixing mechanical, hydraulic, and electrical faults. Carrying out inspections and ensuring all machinery meets safety standards. Recording work carried out and maintaining accurate service records. Working as part of a dedicated workshop team to ensure smooth operations. What Our Next Workshop Plant Fitter Will Need to Succeed: NVQ Level 2/3 in Plant Maintenance & Repair (or equivalent). Previous experience working on heavy plant machinery (Excavators, Dumpers, Rollers, Telehandlers etc.). Strong mechanical and diagnostic skills. A proactive attitude and commitment to high-quality workmanship. Good organisational and communication skills. What's in it for Our Next Workshop Plant Fitter: Competitive salary with overtime opportunities. Excellent working conditions in a modern, well-equipped workshop. Ongoing training and genuine opportunities for career growth. Supportive and friendly team environment. About Elite Workforce Solutions: We're not just recruiters - we're matchmakers for careers! Specialising in industries like Automotive, Plant, and Civil Engineering, we bring over 40 years of combined expertise to help skilled professionals like you find their next great opportunity. Take the first step towards your exciting new career and apply today! If this role is of interest, please contact Liam at Elite Workforce Solutions.
Mar 04, 2026
Full time
Job Description: Job Title: Workshop Plant Fitter Salary: £30,000.00 - £40,000.00 Location: Stratford-Upon-Avon Shift: 42.5hrs Per Week (Mon-Fri Days) Are you a skilled problem-solver who enjoys working with Heavy Plant machinery? Do you take pride in repairing and maintaining equipment to the highest standard? If so, this Plant Fitter role could be perfect for you! What is the Workshop Plant Fitter Job About? As a Plant Fitter, you'll be based in our fully equipped workshop, carrying out servicing, repairs, and inspections on a wide range of plant machinery. You'll work closely with a supportive team, using your technical skills to keep our equipment running safely and efficiently. What Our Next Workshop Plant Fitter Will Be Doing: Servicing, repairing, and maintaining a range of heavy plant equipment. Diagnosing and fixing mechanical, hydraulic, and electrical faults. Carrying out inspections and ensuring all machinery meets safety standards. Recording work carried out and maintaining accurate service records. Working as part of a dedicated workshop team to ensure smooth operations. What Our Next Workshop Plant Fitter Will Need to Succeed: NVQ Level 2/3 in Plant Maintenance & Repair (or equivalent). Previous experience working on heavy plant machinery (Excavators, Dumpers, Rollers, Telehandlers etc.). Strong mechanical and diagnostic skills. A proactive attitude and commitment to high-quality workmanship. Good organisational and communication skills. What's in it for Our Next Workshop Plant Fitter: Competitive salary with overtime opportunities. Excellent working conditions in a modern, well-equipped workshop. Ongoing training and genuine opportunities for career growth. Supportive and friendly team environment. About Elite Workforce Solutions: We're not just recruiters - we're matchmakers for careers! Specialising in industries like Automotive, Plant, and Civil Engineering, we bring over 40 years of combined expertise to help skilled professionals like you find their next great opportunity. Take the first step towards your exciting new career and apply today! If this role is of interest, please contact Liam at Elite Workforce Solutions.
Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 04, 2026
Full time
Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 04, 2026
Full time
Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 04, 2026
Full time
Job Title: Pipefitter Location: Glasgow - Govan and Scotstoun - Based on site and must be able to attend a recruitment day in Glasgow. Salary: £38,662.00 (additional shift allowance of 33% may be applicable) Requirements: Trade Papers to be provided when submitting application What you'll be doing: Fabricating and installing pipework systems in large and small-bore pipework using different materials (copper, cuni, carbon steel and stainless steel) Using a range of hand tools & mechanical equipment to cut, bend and weld pipes as well as installation of pipework. Installing utilities aboard ship i.e. sinks, showers, and toilets Install and assemble fittings, valves, and related components according to drawings and specifications. Collaborate with other trades to ensure the timely and accurate completion of projects. Adhere to safety regulations and company procedures at all times Maintain accurate records of work carried out Your skills and experiences: Essential : Modern Apprenticeship certificate/Trade Papers (you will be required to provide these papers) and relevant qualifications (e.g., SVQ3, City & Guilds, or equivalent) Current knowledge and experience of pipe manufacture, installation, and use of associated equipment Strong knowledge of pipefitting techniques, tools, and safety standards Ability to read and interpret engineering drawings and technical specifications Clear understanding of SHE , COSHH and Risk Assessments Proven experience as a Pipefitter or similar within an industrial or commercial environment Desirable : Marine Pipefitting Experience Experience in industrial or commercial settings preferred Understanding of manufacturing processes Experience in TIG Pipe Welding Please ensure you have attached a copy of your qualifications when submitting your application Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Pipefitter team: We are seeking a skilled and experienced Pipefitter to join our team in Clyde. The successful candidate will be responsible for fabricating and installing piping systems across a range of projects in the defence sector. You will play a key role in ensuring the efficient operation of piping installations while maintaining the highest standards of safety and quality. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 4th March 2026 - Trades Tests will be held in March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
