Job Title: Plumbing and Heating Engineer Location: Covering the South West Starting Salary: Circa 37,500- 40,000 (OTE 45K) Type: Full-time Permanent Start Date: ASAP Innotech Partners are collaborating with an established Contractor who specialise design, installation and maintenance services for electrical, heating, plumbing, fire and security systems. They are seeking an enthusiastic Plumbing and Heating Engineer to join them on a permanent full time basis. If successful, you will be joining a progressive company within a team of around 130 engineers working across the Wiltshire and the surrounding counties. The standard hours are 40 hours a week Monday - Friday and overtime is plentiful if and when you would like to pick it up. Role Objective: To be able to carry out installation work in all types of domestic and commercial environments. Role Duties Interpret drawings and building specifications to enable the installation of pipework drainage systems Installation of supports for pipework, plant and equipment Installation of heating and water plant both commercial and domestic Assess labour requirements on own projects and work with the contracts management team to ensure site progress is managed and maintained Carry out inspections of plumbing and heating installations to identify faults and carry out repairs as required. Testing and commissioning of heating, hot and cold-water systems and recording data in line with compliance requirements Responsible for their own compliance to Health & Safety legislation, safe systems of work and for the safety of any other persons who may be affected by the work being carried out Requirements NVQ level 2 or 3 in plumbing Numerically proficient with excellent attention to detail Friendly and approachable with a flexible attitude, good customer focus and service Gas qualifications desirable but not essential Proven delivery of results Full UK driver's licence Benefits Starting salary Circa 37,500 - 40,000 (OTE 45K) Holiday - 20 days + 8 days Bank Holidays fuel card & Company Van Opportunity to earn overtime (1.5x on Saturdays) Uniform & Tools provided Progression opportunities Pension contribution Full training by a supportive friendly team. If this role is of interest, please apply via the link and we will be in touch. Alternatively, you can contact Chris Duggan at Innotech Partners to discuss the role in more detail. INNOTECH PARTNERS acts as an employment agency (perm) and an Employment Business (temp/contract). Innotech Partners limited phone number removed acts as an Employment Agency and is a subsidiary of Talentia Group.
Jun 17, 2025
Full time
Job Title: Plumbing and Heating Engineer Location: Covering the South West Starting Salary: Circa 37,500- 40,000 (OTE 45K) Type: Full-time Permanent Start Date: ASAP Innotech Partners are collaborating with an established Contractor who specialise design, installation and maintenance services for electrical, heating, plumbing, fire and security systems. They are seeking an enthusiastic Plumbing and Heating Engineer to join them on a permanent full time basis. If successful, you will be joining a progressive company within a team of around 130 engineers working across the Wiltshire and the surrounding counties. The standard hours are 40 hours a week Monday - Friday and overtime is plentiful if and when you would like to pick it up. Role Objective: To be able to carry out installation work in all types of domestic and commercial environments. Role Duties Interpret drawings and building specifications to enable the installation of pipework drainage systems Installation of supports for pipework, plant and equipment Installation of heating and water plant both commercial and domestic Assess labour requirements on own projects and work with the contracts management team to ensure site progress is managed and maintained Carry out inspections of plumbing and heating installations to identify faults and carry out repairs as required. Testing and commissioning of heating, hot and cold-water systems and recording data in line with compliance requirements Responsible for their own compliance to Health & Safety legislation, safe systems of work and for the safety of any other persons who may be affected by the work being carried out Requirements NVQ level 2 or 3 in plumbing Numerically proficient with excellent attention to detail Friendly and approachable with a flexible attitude, good customer focus and service Gas qualifications desirable but not essential Proven delivery of results Full UK driver's licence Benefits Starting salary Circa 37,500 - 40,000 (OTE 45K) Holiday - 20 days + 8 days Bank Holidays fuel card & Company Van Opportunity to earn overtime (1.5x on Saturdays) Uniform & Tools provided Progression opportunities Pension contribution Full training by a supportive friendly team. If this role is of interest, please apply via the link and we will be in touch. Alternatively, you can contact Chris Duggan at Innotech Partners to discuss the role in more detail. INNOTECH PARTNERS acts as an employment agency (perm) and an Employment Business (temp/contract). Innotech Partners limited phone number removed acts as an Employment Agency and is a subsidiary of Talentia Group.
Country: United Kingdom Location: UK Field Based, Field Based, United Kingdom Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering Berkshire, Hampshire and Surrey regions. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Jun 17, 2025
Full time
Country: United Kingdom Location: UK Field Based, Field Based, United Kingdom Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering Berkshire, Hampshire and Surrey regions. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Role: Gas Fitter - Domestic Works (Gas Contract) Reporting To: Site Supervisor / Project Manager Location: Central Belt Scotland Employment Type: Self- Employed Rate: Depending on experience Purpose of the Role: To carry out internal domestic gas works safely, efficiently, and to a high standard within customer properties. The Gas Fitter will work as part of a team to support the delivery of gas meter relocation, copper runs, testing, purging, and other related tasks, ensuring customer satisfaction and compliance with relevant regulations. Key Responsibilities: Gas Meter Works: Move and reposition domestic gas meters in line with customer requirements. Ensure all re connections are leak-free, secure, and meet industry standards. Copper Runs: Install new internal copper pipework to a high standard of workmanship. Minimise disruption to the customer's property and ensure neat and tidy installations. Testing & Purging: Carry out pressure testing and purging of internal gas pipework before and after works. Ensure all test records are accurate and compliant with current gas safety regulations. Health & Safety: Always work in accordance with company risk assessments, method statements, and safe systems of work. Identify and mitigate any hazards in the work area, using personal protective equipment (PPE) as required. Report any safety concerns or incidents immediately to the supervisor. Customer Interaction: Maintain a courteous, professional, and respectful manner at all times while working in or around customer premises. Clearly explain works to customers when required and ensure they are satisfied before leaving site. Leave all work areas clean, safe, and secure on completion. Teamwork: Collaborate with colleagues, site supervisors, and other trades to ensure smooth delivery of works. Support team members and contribute to a positive working environment. Compliance & Documentation: Ensure all work is carried out in accordance with current Gas Safe regulations and company procedures. Accurately complete all required job sheets, test certificates, and customer sign-offs. Required Skills and Experience: Valid Gas Safe Registration with appropriate qualifications for domestic meter work and pipework. Proven experience in internal gas installations and meter moves. Strong understanding of gas safety standards and testing procedures. Excellent communication and customer service skills. Ability to work independently and as part of a team. Required Qualifications: All candidates must hold valid and up-to-date Gas Safe qualifications, including: CCN1 - Core Domestic Gas Safety CPA1 - Combustion Performance Analysis CENWAT - Central Heating Boilers & Water Heaters CKR1 - Domestic Cooking Appliances HTR1 - Fires and Wall Heaters MET1 - Domestic Gas Meters up to 6m
Jun 17, 2025
Full time
Role: Gas Fitter - Domestic Works (Gas Contract) Reporting To: Site Supervisor / Project Manager Location: Central Belt Scotland Employment Type: Self- Employed Rate: Depending on experience Purpose of the Role: To carry out internal domestic gas works safely, efficiently, and to a high standard within customer properties. The Gas Fitter will work as part of a team to support the delivery of gas meter relocation, copper runs, testing, purging, and other related tasks, ensuring customer satisfaction and compliance with relevant regulations. Key Responsibilities: Gas Meter Works: Move and reposition domestic gas meters in line with customer requirements. Ensure all re connections are leak-free, secure, and meet industry standards. Copper Runs: Install new internal copper pipework to a high standard of workmanship. Minimise disruption to the customer's property and ensure neat and tidy installations. Testing & Purging: Carry out pressure testing and purging of internal gas pipework before and after works. Ensure all test records are accurate and compliant with current gas safety regulations. Health & Safety: Always work in accordance with company risk assessments, method statements, and safe systems of work. Identify and mitigate any hazards in the work area, using personal protective equipment (PPE) as required. Report any safety concerns or incidents immediately to the supervisor. Customer Interaction: Maintain a courteous, professional, and respectful manner at all times while working in or around customer premises. Clearly explain works to customers when required and ensure they are satisfied before leaving site. Leave all work areas clean, safe, and secure on completion. Teamwork: Collaborate with colleagues, site supervisors, and other trades to ensure smooth delivery of works. Support team members and contribute to a positive working environment. Compliance & Documentation: Ensure all work is carried out in accordance with current Gas Safe regulations and company procedures. Accurately complete all required job sheets, test certificates, and customer sign-offs. Required Skills and Experience: Valid Gas Safe Registration with appropriate qualifications for domestic meter work and pipework. Proven experience in internal gas installations and meter moves. Strong understanding of gas safety standards and testing procedures. Excellent communication and customer service skills. Ability to work independently and as part of a team. Required Qualifications: All candidates must hold valid and up-to-date Gas Safe qualifications, including: CCN1 - Core Domestic Gas Safety CPA1 - Combustion Performance Analysis CENWAT - Central Heating Boilers & Water Heaters CKR1 - Domestic Cooking Appliances HTR1 - Fires and Wall Heaters MET1 - Domestic Gas Meters up to 6m
Commercial Gas Engineer Build Recruitment are currently seeking a Commercial Gas Engineer for a permanent job opportunity covering Windsor, Northolt and Feltham. This position will provide a van, fuel card and PDA, covering commercial properties only. Responsibilities of the Commercial Gas Engineer: Providing commercial gas maintenance and repair expertise across several clients, within commercial properties. Undertaking minor and major commercial gas works, plus the following associated tasks: Boiler servicing, maintenance, and breakdown repairs Installation of new commercial heating systems Testing and commissioning of commercial gas appliances Diagnostic work and fault finding General heating system repairs and pipework installations About you as the Commercial Gas Engineer: Experienced as a Commercial Gas Engineer within maintenance or installation Recognized qualifications in commercial gas (COCN1, CODNCO1, ICPN1, TPCP1/1A, CIGA1, CDGA1) Well-versed in gas regulations and safety standards Organized, punctual, and dependable Full UK Driving Licence (essential) If you are a skilled Commercial Gas Engineer with experience in maintenance and installation works and are seeking an exciting new opportunity within an existing maintenance contract, please send us your CV by clicking 'Apply Now'! Build Recruitment Limited acts as an Employment Business for the supply of temporary workers and an Employment Agency in relation to permanent vacancies. Build Recruitment is an equal opportunities employer.
Jun 14, 2025
Full time
Commercial Gas Engineer Build Recruitment are currently seeking a Commercial Gas Engineer for a permanent job opportunity covering Windsor, Northolt and Feltham. This position will provide a van, fuel card and PDA, covering commercial properties only. Responsibilities of the Commercial Gas Engineer: Providing commercial gas maintenance and repair expertise across several clients, within commercial properties. Undertaking minor and major commercial gas works, plus the following associated tasks: Boiler servicing, maintenance, and breakdown repairs Installation of new commercial heating systems Testing and commissioning of commercial gas appliances Diagnostic work and fault finding General heating system repairs and pipework installations About you as the Commercial Gas Engineer: Experienced as a Commercial Gas Engineer within maintenance or installation Recognized qualifications in commercial gas (COCN1, CODNCO1, ICPN1, TPCP1/1A, CIGA1, CDGA1) Well-versed in gas regulations and safety standards Organized, punctual, and dependable Full UK Driving Licence (essential) If you are a skilled Commercial Gas Engineer with experience in maintenance and installation works and are seeking an exciting new opportunity within an existing maintenance contract, please send us your CV by clicking 'Apply Now'! Build Recruitment Limited acts as an Employment Business for the supply of temporary workers and an Employment Agency in relation to permanent vacancies. Build Recruitment is an equal opportunities employer.
Commercial Gas Engineer - United Kingdom Job Purpose The main purpose of this role is to carry out all aspects of servicing and remedial repairs to commercial heating/gas systems in a variety of environments including hotels, large private residential blocks, schools and a range of commercial buildings. The postholder will work independently and in teams depending on the particular job and be supported by a technical and administrative team. The role is based in and around the UK. The post holder will ensure the quality of their work is of the highest standard by maintaining their skills and appropriate registrations and will also be part of the out-of-hours emergency callout rota. Key Duties and Responsibilities • Carry out mechanical works to include service and breakdown on all aspects of commercial heating systems including all main types of boiler, pressurisation units, expansion vessels, plate heat exchangers, and pumps (ideally to be able to replace all seals and bearings) • Test and repair basic electrical systems in plant rooms including testing of contactors, overloads and relays (complex electrical work carried out by NICEIC qualified staff). • Carry out pipework repairs and installations including copper soldering, threaded barrel pipe, crimping and fusion weld where required • Work flexibly and proficiently to ensure works are completed in a reasonable time to a high standard. • Maintain a detailed knowledge of heating system design, installation and servicing requirements in accordance with manufacturer s recommendations understanding sealed and open vent, s and y plans for example) • Commission gas heating boilers and associated controls on completion of installation or servicing works • Fault finding / diagnostic skills and the ability to carry out necessary repairs/replacement of defective parts etc. • Able to drain down and refill all heating system/s in order to remove and replace defective/leaking equipment including radiators and isolation valves • Comply with all legal requirements including but not limited to the relevant sections of the Health and Safety at Work Act (risk assessment, asbestos awareness etc.) • Maintain personal skills and registrations • To participate in out-of-hours emergency callout rota as required • Any other duties as reasonably requested Experience • Good practical and problem-solving skills • 2+ years' experience working on Commercial Appliances and Boilers • Experience working on HIU S desirable but not essential • Can identify all relevant risks e.g. asbestos awareness • Understands Risk Assessment process • Evidence of delivering high quality service to customers • Evidence of successfully working in a team • Understanding of compliance with legal obligations and company policies Knowledge and skills • Current/Valid Commercial Gas Qualifications e.g. CCN1, CEN1, CPA1, etc • Domestic ACS qualifications desirable but not essential • A relevant City and Guilds / NVQ Qualification desirable • Experience working on HIU S desirable • Good verbal, written and presentational communication skills • Demonstrates ability to understand technical issues and translate them clearly and succinctly to customers and colleagues • Demonstrates ability to prioritise workload to achieve deadlines • Able to problem solve and continuously seek improved performance • A calm, logical approach with an ability to work and deliver under pressure • Good IT skills including Office 365 and service IT systems • Full UK Driving licence Hours of Work, Salary & Benefits • Monday - Friday, 8:00am - 17:00pm • Competitive salary and generous overtime rates - paid monthly via BACS • Pension Scheme - auto enrolment • Company vehicle, mobile phone, and iPad • Company uniform • This role is subject to a 3-month probationary period
Jun 14, 2025
Full time
Commercial Gas Engineer - United Kingdom Job Purpose The main purpose of this role is to carry out all aspects of servicing and remedial repairs to commercial heating/gas systems in a variety of environments including hotels, large private residential blocks, schools and a range of commercial buildings. The postholder will work independently and in teams depending on the particular job and be supported by a technical and administrative team. The role is based in and around the UK. The post holder will ensure the quality of their work is of the highest standard by maintaining their skills and appropriate registrations and will also be part of the out-of-hours emergency callout rota. Key Duties and Responsibilities • Carry out mechanical works to include service and breakdown on all aspects of commercial heating systems including all main types of boiler, pressurisation units, expansion vessels, plate heat exchangers, and pumps (ideally to be able to replace all seals and bearings) • Test and repair basic electrical systems in plant rooms including testing of contactors, overloads and relays (complex electrical work carried out by NICEIC qualified staff). • Carry out pipework repairs and installations including copper soldering, threaded barrel pipe, crimping and fusion weld where required • Work flexibly and proficiently to ensure works are completed in a reasonable time to a high standard. • Maintain a detailed knowledge of heating system design, installation and servicing requirements in accordance with manufacturer s recommendations understanding sealed and open vent, s and y plans for example) • Commission gas heating boilers and associated controls on completion of installation or servicing works • Fault finding / diagnostic skills and the ability to carry out necessary repairs/replacement of defective parts etc. • Able to drain down and refill all heating system/s in order to remove and replace defective/leaking equipment including radiators and isolation valves • Comply with all legal requirements including but not limited to the relevant sections of the Health and Safety at Work Act (risk assessment, asbestos awareness etc.) • Maintain personal skills and registrations • To participate in out-of-hours emergency callout rota as required • Any other duties as reasonably requested Experience • Good practical and problem-solving skills • 2+ years' experience working on Commercial Appliances and Boilers • Experience working on HIU S desirable but not essential • Can identify all relevant risks e.g. asbestos awareness • Understands Risk Assessment process • Evidence of delivering high quality service to customers • Evidence of successfully working in a team • Understanding of compliance with legal obligations and company policies Knowledge and skills • Current/Valid Commercial Gas Qualifications e.g. CCN1, CEN1, CPA1, etc • Domestic ACS qualifications desirable but not essential • A relevant City and Guilds / NVQ Qualification desirable • Experience working on HIU S desirable • Good verbal, written and presentational communication skills • Demonstrates ability to understand technical issues and translate them clearly and succinctly to customers and colleagues • Demonstrates ability to prioritise workload to achieve deadlines • Able to problem solve and continuously seek improved performance • A calm, logical approach with an ability to work and deliver under pressure • Good IT skills including Office 365 and service IT systems • Full UK Driving licence Hours of Work, Salary & Benefits • Monday - Friday, 8:00am - 17:00pm • Competitive salary and generous overtime rates - paid monthly via BACS • Pension Scheme - auto enrolment • Company vehicle, mobile phone, and iPad • Company uniform • This role is subject to a 3-month probationary period
Dual Fuel Smart Meter Installer Monday - Friday - 40 Hour Week Basic salary 39,000 350 Monthly bonus - 4,200 Annually Meter Bonus from first install No On-Call and No Weekends OTE 52k PLEASE READ YOU MUST BE CCN1 or CMA1 and MET1 GAS Qualified to apply for this Dual Fuel Position Benefits of being a Dual Fuel Meter Installer company vehicle, uniform, phone, and tools. Attendance and Loyalty Bonus Progression Opportunities No On-Call and no weekends 31 days holiday Company pension We are recruiting in Scotland for Dual Fuel Smart Meter Engineers AB, BB, BL, BN, BR, CA, CB, CH, CR, CT, CV, DA, DD, DE, DG, EH, EX, FK, G, GL, GU, HA, HP, IP, IV, KA, KT, LA, LL, LN, M, ME, MK, ML, NN, NP, NR, OL, PH, PL, PO, PR, RG, RH, SA, SG, SK, SL, SN, SP, SS, ST, SY, TA, TD, TF, TQ, TR, TS, WD, WN, WV, YO The Role of a Smart Meter Engineer As a Dual Fuel Engineer, you will be fitting and removing Dual Fuel metres while delivering an exceptional customer service experience to the customers you engage with day to day, as well as being focused on the ongoing development of your technical and personal skills, to achieve your optimal performance becoming the best Dual Fuel Engineer. The Company You will work for one of the UK's largest dual-fuel metering companies with single-fuel and dual-fuel engineers working on contracts nationwide. They aim to keep work as close to your home postcode as possible. Working on multiple smart metering contracts Qualifications required for a Dual Fuel Meter Installer CCN1 or CMA1 18 months Dual Fuel Experience MET1 EUSR Registered RECenergy has single-fuel and dual-fuel metering positions available across the country, so if this position is not right for you, get in touch and we will still be able to help you elsewhere. RECenergy are expert in Smart metering, single and dual fuel metering, solar installations, EV installations and mid to senior management roles.
Jun 12, 2025
Full time
Dual Fuel Smart Meter Installer Monday - Friday - 40 Hour Week Basic salary 39,000 350 Monthly bonus - 4,200 Annually Meter Bonus from first install No On-Call and No Weekends OTE 52k PLEASE READ YOU MUST BE CCN1 or CMA1 and MET1 GAS Qualified to apply for this Dual Fuel Position Benefits of being a Dual Fuel Meter Installer company vehicle, uniform, phone, and tools. Attendance and Loyalty Bonus Progression Opportunities No On-Call and no weekends 31 days holiday Company pension We are recruiting in Scotland for Dual Fuel Smart Meter Engineers AB, BB, BL, BN, BR, CA, CB, CH, CR, CT, CV, DA, DD, DE, DG, EH, EX, FK, G, GL, GU, HA, HP, IP, IV, KA, KT, LA, LL, LN, M, ME, MK, ML, NN, NP, NR, OL, PH, PL, PO, PR, RG, RH, SA, SG, SK, SL, SN, SP, SS, ST, SY, TA, TD, TF, TQ, TR, TS, WD, WN, WV, YO The Role of a Smart Meter Engineer As a Dual Fuel Engineer, you will be fitting and removing Dual Fuel metres while delivering an exceptional customer service experience to the customers you engage with day to day, as well as being focused on the ongoing development of your technical and personal skills, to achieve your optimal performance becoming the best Dual Fuel Engineer. The Company You will work for one of the UK's largest dual-fuel metering companies with single-fuel and dual-fuel engineers working on contracts nationwide. They aim to keep work as close to your home postcode as possible. Working on multiple smart metering contracts Qualifications required for a Dual Fuel Meter Installer CCN1 or CMA1 18 months Dual Fuel Experience MET1 EUSR Registered RECenergy has single-fuel and dual-fuel metering positions available across the country, so if this position is not right for you, get in touch and we will still be able to help you elsewhere. RECenergy are expert in Smart metering, single and dual fuel metering, solar installations, EV installations and mid to senior management roles.
Dual Fuel Smart Meter Installer Monday - Friday - 40 Hour Week Basic salary 39,000 350 Monthly bonus - 4,200 Annually Meter Bonus from first install No On-Call and No Weekends OTE 52k PLEASE READ YOU MUST BE CCN1 or CMA1 and MET1 GAS Qualified to apply for this Dual Fuel Position Benefits of being a Dual Fuel Meter Installer company vehicle, uniform, phone, and tools. Attendance and Loyalty Bonus Progression Opportunities No On-Call and no weekends 31 days holiday Company pension We are recruiting in Scotland for Dual Fuel Smart Meter Engineers AB, BB, BL, BN, BR, CA, CB, CH, CR, CT, CV, DA, DD, DE, DG, EH, EX, FK, G, GL, GU, HA, HP, IP, IV, KA, KT, LA, LL, LN, M, ME, MK, ML, NN, NP, NR, OL, PH, PL, PO, PR, RG, RH, SA, SG, SK, SL, SN, SP, SS, ST, SY, TA, TD, TF, TQ, TR, TS, WD, WN, WV, YO The Role of a Smart Meter Engineer As a Dual Fuel Engineer, you will be fitting and removing Dual Fuel metres while delivering an exceptional customer service experience to the customers you engage with day to day, as well as being focused on the ongoing development of your technical and personal skills, to achieve your optimal performance becoming the best Dual Fuel Engineer. The Company You will work for one of the UK's largest dual-fuel metering companies with single-fuel and dual-fuel engineers working on contracts nationwide. They aim to keep work as close to your home postcode as possible. Working on multiple smart metering contracts Qualifications required for a Dual Fuel Meter Installer CCN1 or CMA1 18 months Dual Fuel Experience MET1 EUSR Registered RECenergy has single-fuel and dual-fuel metering positions available across the country, so if this position is not right for you, get in touch and we will still be able to help you elsewhere. RECenergy are expert in Smart metering, single and dual fuel metering, solar installations, EV installations and mid to senior management roles.
Jun 12, 2025
Full time
Dual Fuel Smart Meter Installer Monday - Friday - 40 Hour Week Basic salary 39,000 350 Monthly bonus - 4,200 Annually Meter Bonus from first install No On-Call and No Weekends OTE 52k PLEASE READ YOU MUST BE CCN1 or CMA1 and MET1 GAS Qualified to apply for this Dual Fuel Position Benefits of being a Dual Fuel Meter Installer company vehicle, uniform, phone, and tools. Attendance and Loyalty Bonus Progression Opportunities No On-Call and no weekends 31 days holiday Company pension We are recruiting in Scotland for Dual Fuel Smart Meter Engineers AB, BB, BL, BN, BR, CA, CB, CH, CR, CT, CV, DA, DD, DE, DG, EH, EX, FK, G, GL, GU, HA, HP, IP, IV, KA, KT, LA, LL, LN, M, ME, MK, ML, NN, NP, NR, OL, PH, PL, PO, PR, RG, RH, SA, SG, SK, SL, SN, SP, SS, ST, SY, TA, TD, TF, TQ, TR, TS, WD, WN, WV, YO The Role of a Smart Meter Engineer As a Dual Fuel Engineer, you will be fitting and removing Dual Fuel metres while delivering an exceptional customer service experience to the customers you engage with day to day, as well as being focused on the ongoing development of your technical and personal skills, to achieve your optimal performance becoming the best Dual Fuel Engineer. The Company You will work for one of the UK's largest dual-fuel metering companies with single-fuel and dual-fuel engineers working on contracts nationwide. They aim to keep work as close to your home postcode as possible. Working on multiple smart metering contracts Qualifications required for a Dual Fuel Meter Installer CCN1 or CMA1 18 months Dual Fuel Experience MET1 EUSR Registered RECenergy has single-fuel and dual-fuel metering positions available across the country, so if this position is not right for you, get in touch and we will still be able to help you elsewhere. RECenergy are expert in Smart metering, single and dual fuel metering, solar installations, EV installations and mid to senior management roles.
Dual Fuel Smart Meter Installer Monday - Friday - 40 Hour Week Basic salary 39,000 350 Monthly bonus - 4,200 Annually Meter Bonus from first install No On-Call and No Weekends OTE 52k PLEASE READ YOU MUST BE CCN1 or CMA1 and MET1 GAS Qualified to apply for this Dual Fuel Position Benefits of being a Dual Fuel Meter Installer company vehicle, uniform, phone, and tools. Attendance and Loyalty Bonus Progression Opportunities No On-Call and no weekends 31 days holiday Company pension We are recruiting in Scotland for Dual Fuel Smart Meter Engineers AB, BB, BL, BN, BR, CA, CB, CH, CR, CT, CV, DA, DD, DE, DG, EH, EX, FK, G, GL, GU, HA, HP, IP, IV, KA, KT, LA, LL, LN, M, ME, MK, ML, NN, NP, NR, OL, PH, PL, PO, PR, RG, RH, SA, SG, SK, SL, SN, SP, SS, ST, SY, TA, TD, TF, TQ, TR, TS, WD, WN, WV, YO The Role of a Smart Meter Engineer As a Dual Fuel Engineer, you will be fitting and removing Dual Fuel metres while delivering an exceptional customer service experience to the customers you engage with day to day, as well as being focused on the ongoing development of your technical and personal skills, to achieve your optimal performance becoming the best Dual Fuel Engineer. The Company You will work for one of the UK's largest dual-fuel metering companies with single-fuel and dual-fuel engineers working on contracts nationwide. They aim to keep work as close to your home postcode as possible. Working on multiple smart metering contracts Qualifications required for a Dual Fuel Meter Installer CCN1 or CMA1 18 months Dual Fuel Experience MET1 EUSR Registered RECenergy has single-fuel and dual-fuel metering positions available across the country, so if this position is not right for you, get in touch and we will still be able to help you elsewhere. RECenergy are expert in Smart metering, single and dual fuel metering, solar installations, EV installations and mid to senior management roles.
Jun 12, 2025
Full time
Dual Fuel Smart Meter Installer Monday - Friday - 40 Hour Week Basic salary 39,000 350 Monthly bonus - 4,200 Annually Meter Bonus from first install No On-Call and No Weekends OTE 52k PLEASE READ YOU MUST BE CCN1 or CMA1 and MET1 GAS Qualified to apply for this Dual Fuel Position Benefits of being a Dual Fuel Meter Installer company vehicle, uniform, phone, and tools. Attendance and Loyalty Bonus Progression Opportunities No On-Call and no weekends 31 days holiday Company pension We are recruiting in Scotland for Dual Fuel Smart Meter Engineers AB, BB, BL, BN, BR, CA, CB, CH, CR, CT, CV, DA, DD, DE, DG, EH, EX, FK, G, GL, GU, HA, HP, IP, IV, KA, KT, LA, LL, LN, M, ME, MK, ML, NN, NP, NR, OL, PH, PL, PO, PR, RG, RH, SA, SG, SK, SL, SN, SP, SS, ST, SY, TA, TD, TF, TQ, TR, TS, WD, WN, WV, YO The Role of a Smart Meter Engineer As a Dual Fuel Engineer, you will be fitting and removing Dual Fuel metres while delivering an exceptional customer service experience to the customers you engage with day to day, as well as being focused on the ongoing development of your technical and personal skills, to achieve your optimal performance becoming the best Dual Fuel Engineer. The Company You will work for one of the UK's largest dual-fuel metering companies with single-fuel and dual-fuel engineers working on contracts nationwide. They aim to keep work as close to your home postcode as possible. Working on multiple smart metering contracts Qualifications required for a Dual Fuel Meter Installer CCN1 or CMA1 18 months Dual Fuel Experience MET1 EUSR Registered RECenergy has single-fuel and dual-fuel metering positions available across the country, so if this position is not right for you, get in touch and we will still be able to help you elsewhere. RECenergy are expert in Smart metering, single and dual fuel metering, solar installations, EV installations and mid to senior management roles.
Dual Fuel Smart Meter Installer Monday - Friday - 40 Hour Week Basic salary 39,000 350 Monthly bonus - 4,200 Annually Meter Bonus from first install No On-Call and No Weekends OTE 52k PLEASE READ YOU MUST BE CCN1 or CMA1 and MET1 GAS Qualified to apply for this Dual Fuel Position Benefits of being a Dual Fuel Meter Installer company vehicle, uniform, phone, and tools. Attendance and Loyalty Bonus Progression Opportunities No On-Call and no weekends 31 days holiday Company pension We are recruiting in Scotland for Dual Fuel Smart Meter Engineers AB, BB, BL, BN, BR, CA, CB, CH, CR, CT, CV, DA, DD, DE, DG, EH, EX, FK, G, GL, GU, HA, HP, IP, IV, KA, KT, LA, LL, LN, M, ME, MK, ML, NN, NP, NR, OL, PH, PL, PO, PR, RG, RH, SA, SG, SK, SL, SN, SP, SS, ST, SY, TA, TD, TF, TQ, TR, TS, WD, WN, WV, YO The Role of a Smart Meter Engineer As a Dual Fuel Engineer, you will be fitting and removing Dual Fuel metres while delivering an exceptional customer service experience to the customers you engage with day to day, as well as being focused on the ongoing development of your technical and personal skills, to achieve your optimal performance becoming the best Dual Fuel Engineer. The Company You will work for one of the UK's largest dual-fuel metering companies with single-fuel and dual-fuel engineers working on contracts nationwide. They aim to keep work as close to your home postcode as possible. Working on multiple smart metering contracts Qualifications required for a Dual Fuel Meter Installer CCN1 or CMA1 18 months Dual Fuel Experience MET1 EUSR Registered RECenergy has single-fuel and dual-fuel metering positions available across the country, so if this position is not right for you, get in touch and we will still be able to help you elsewhere. RECenergy are expert in Smart metering, single and dual fuel metering, solar installations, EV installations and mid to senior management roles.
Jun 12, 2025
Full time
Dual Fuel Smart Meter Installer Monday - Friday - 40 Hour Week Basic salary 39,000 350 Monthly bonus - 4,200 Annually Meter Bonus from first install No On-Call and No Weekends OTE 52k PLEASE READ YOU MUST BE CCN1 or CMA1 and MET1 GAS Qualified to apply for this Dual Fuel Position Benefits of being a Dual Fuel Meter Installer company vehicle, uniform, phone, and tools. Attendance and Loyalty Bonus Progression Opportunities No On-Call and no weekends 31 days holiday Company pension We are recruiting in Scotland for Dual Fuel Smart Meter Engineers AB, BB, BL, BN, BR, CA, CB, CH, CR, CT, CV, DA, DD, DE, DG, EH, EX, FK, G, GL, GU, HA, HP, IP, IV, KA, KT, LA, LL, LN, M, ME, MK, ML, NN, NP, NR, OL, PH, PL, PO, PR, RG, RH, SA, SG, SK, SL, SN, SP, SS, ST, SY, TA, TD, TF, TQ, TR, TS, WD, WN, WV, YO The Role of a Smart Meter Engineer As a Dual Fuel Engineer, you will be fitting and removing Dual Fuel metres while delivering an exceptional customer service experience to the customers you engage with day to day, as well as being focused on the ongoing development of your technical and personal skills, to achieve your optimal performance becoming the best Dual Fuel Engineer. The Company You will work for one of the UK's largest dual-fuel metering companies with single-fuel and dual-fuel engineers working on contracts nationwide. They aim to keep work as close to your home postcode as possible. Working on multiple smart metering contracts Qualifications required for a Dual Fuel Meter Installer CCN1 or CMA1 18 months Dual Fuel Experience MET1 EUSR Registered RECenergy has single-fuel and dual-fuel metering positions available across the country, so if this position is not right for you, get in touch and we will still be able to help you elsewhere. RECenergy are expert in Smart metering, single and dual fuel metering, solar installations, EV installations and mid to senior management roles.
Dual Fuel Smart Meter Installer Monday - Friday - 40 Hour Week Basic salary 39,000 350 Monthly bonus - 4,200 Annually Meter Bonus from first install No On-Call and No Weekends OTE 52k PLEASE READ YOU MUST BE CCN1 or CMA1 and MET1 GAS Qualified to apply for this Dual Fuel Position Benefits of being a Dual Fuel Meter Installer company vehicle, uniform, phone, and tools. Attendance and Loyalty Bonus Progression Opportunities No On-Call and no weekends 31 days holiday Company pension We are recruiting in Scotland for Dual Fuel Smart Meter Engineers AB, BB, BL, BN, BR, CA, CB, CH, CR, CT, CV, DA, DD, DE, DG, EH, EX, FK, G, GL, GU, HA, HP, IP, IV, KA, KT, LA, LL, LN, M, ME, MK, ML, NN, NP, NR, OL, PH, PL, PO, PR, RG, RH, SA, SG, SK, SL, SN, SP, SS, ST, SY, TA, TD, TF, TQ, TR, TS, WD, WN, WV, YO The Role of a Smart Meter Engineer As a Dual Fuel Engineer, you will be fitting and removing Dual Fuel metres while delivering an exceptional customer service experience to the customers you engage with day to day, as well as being focused on the ongoing development of your technical and personal skills, to achieve your optimal performance becoming the best Dual Fuel Engineer. The Company You will work for one of the UK's largest dual-fuel metering companies with single-fuel and dual-fuel engineers working on contracts nationwide. They aim to keep work as close to your home postcode as possible. Working on multiple smart metering contracts Qualifications required for a Dual Fuel Meter Installer CCN1 or CMA1 18 months Dual Fuel Experience MET1 EUSR Registered RECenergy has single-fuel and dual-fuel metering positions available across the country, so if this position is not right for you, get in touch and we will still be able to help you elsewhere. RECenergy are expert in Smart metering, single and dual fuel metering, solar installations, EV installations and mid to senior management roles.
Jun 12, 2025
Full time
Dual Fuel Smart Meter Installer Monday - Friday - 40 Hour Week Basic salary 39,000 350 Monthly bonus - 4,200 Annually Meter Bonus from first install No On-Call and No Weekends OTE 52k PLEASE READ YOU MUST BE CCN1 or CMA1 and MET1 GAS Qualified to apply for this Dual Fuel Position Benefits of being a Dual Fuel Meter Installer company vehicle, uniform, phone, and tools. Attendance and Loyalty Bonus Progression Opportunities No On-Call and no weekends 31 days holiday Company pension We are recruiting in Scotland for Dual Fuel Smart Meter Engineers AB, BB, BL, BN, BR, CA, CB, CH, CR, CT, CV, DA, DD, DE, DG, EH, EX, FK, G, GL, GU, HA, HP, IP, IV, KA, KT, LA, LL, LN, M, ME, MK, ML, NN, NP, NR, OL, PH, PL, PO, PR, RG, RH, SA, SG, SK, SL, SN, SP, SS, ST, SY, TA, TD, TF, TQ, TR, TS, WD, WN, WV, YO The Role of a Smart Meter Engineer As a Dual Fuel Engineer, you will be fitting and removing Dual Fuel metres while delivering an exceptional customer service experience to the customers you engage with day to day, as well as being focused on the ongoing development of your technical and personal skills, to achieve your optimal performance becoming the best Dual Fuel Engineer. The Company You will work for one of the UK's largest dual-fuel metering companies with single-fuel and dual-fuel engineers working on contracts nationwide. They aim to keep work as close to your home postcode as possible. Working on multiple smart metering contracts Qualifications required for a Dual Fuel Meter Installer CCN1 or CMA1 18 months Dual Fuel Experience MET1 EUSR Registered RECenergy has single-fuel and dual-fuel metering positions available across the country, so if this position is not right for you, get in touch and we will still be able to help you elsewhere. RECenergy are expert in Smart metering, single and dual fuel metering, solar installations, EV installations and mid to senior management roles.
My client requires a Mobile Mechanical & Plumbing Engineer (commercial biased) on a permanent basis for an immediate start. They carry out diagnostics, repairs and planned installations for Domestic and Commercial properties (Mainly Commercial). They are expanding so it's an exciting time to become part of the team. They take huge pride in technical skill & customer service, so you must be highly experienced along with having great communication and personal skills. As they are a growing company there is also opportunity for the right candidate to work their way up into a management role. Works are carried out within the M25 radius, so you will need a full UK driving license and be confident driving in London. Requirements: NVQ Level 2 Plumbing is essential Blue CSCS card Commercial Gas Safe is desirable (not essential) A proven track record in commercial or property maintenance Mechanical/plumbing installation experience Mechanical/plumbing reactive works experience Excellent customer service skills Honest, hard-working, and reliable Working hours: 40 hrs per week (Monday to Friday) Mobile Role Weekend availability / Out of Hours availability paid as overtime
Jun 12, 2025
Full time
My client requires a Mobile Mechanical & Plumbing Engineer (commercial biased) on a permanent basis for an immediate start. They carry out diagnostics, repairs and planned installations for Domestic and Commercial properties (Mainly Commercial). They are expanding so it's an exciting time to become part of the team. They take huge pride in technical skill & customer service, so you must be highly experienced along with having great communication and personal skills. As they are a growing company there is also opportunity for the right candidate to work their way up into a management role. Works are carried out within the M25 radius, so you will need a full UK driving license and be confident driving in London. Requirements: NVQ Level 2 Plumbing is essential Blue CSCS card Commercial Gas Safe is desirable (not essential) A proven track record in commercial or property maintenance Mechanical/plumbing installation experience Mechanical/plumbing reactive works experience Excellent customer service skills Honest, hard-working, and reliable Working hours: 40 hrs per week (Monday to Friday) Mobile Role Weekend availability / Out of Hours availability paid as overtime
Gas Engineer / Heating Engineer Domestic Environments Servicing, Breakdowns & Installations London Weekly Pay Self Employed, Full Time Contractor 70K - 120K per annum . Due to increased demand in work load, we are actively recruiting for a qualified Gas Engineer / Heating Engineer (to CCN1 standard) to work on a mobile basis to carry out servicing / maintenance, breakdowns and installation works across privately owned, customer homes in the London region. This is a franchise agreement for a self employed contractor, to work with the business on a full time, on-going basis. Earnings: Estimated 1,500 - 3,000 per week. 62.50 per hour Mon-Sun 07:00am-6:00pm 87.50 per hour Mon-Sun: 6:00pm - 00:00am 112.50 per hour 00:00am - 7:00am Or 50% of all Labour rate on priced works. Example Week: 25 hours per week with a customer: 1,562.50 ( 81,250 per annum) 30 hours per week with a customer: 1,875 ( 97,500) 35 hours per week with a customer: 2,187.50 ( 113,750) 35 hours per week with a customer + 6 hours overtime: 2,712.50 ( 141,050) 35 hours per week with a customer + 12 hours overtime: 3,237.50 ( 168,350) 35 hours per week with a customer + 6 hours evenings + 6 hours nights: 3,327.50 ( 173,030). Associated Costs: Working as a Plumber within this Franchise / Self Employed Contractor agreement, you will have associated costs, this includes: Company Van Rental (non-negotiable), fuel costs, parking costs, public liability insurance for your limited company, estimated annual cost: 15,000 per annum / 288 per week deducted from payments. Provided by the company: ULEZ, Congestion, Vehicle Insurance, Road Tax. Works / Duties: Carry out routine and reactive maintenance on domestic gas appliances and heating systems Install and commission domestic boilers, heating systems, and controls Diagnose and repair boiler breakdowns and gas-related faults Conduct landlord gas safety inspections (CP12s) and servicing Powerflushing and system cleansing Carry out radiator installations, heating upgrades, and zoning Support plumbing works on combined heating/plumbing projects Adhere to all relevant gas safety legislation and company procedures Provide excellent customer service in private homes, maintaining a tidy and respectful work environment Complete job reports, service records, and compliance documentation using a mobile system or paperwork Maintain a clean, stocked, and compliant van at all times Requirements: Must be able to commit to working full time, Monday - Friday, 08:00am - 5:00pm. Must be flexible with out of hours works in evenings or weekends when required (ie: 1 weekend per month). Must hold current ACS - CCN1 certificate and be Gas Safe Registered. Must have a minimum of 5 years experience as a Gas Engineer / Heating Engineer. Strong knowledge of domestic heating systems. Full UK driving licence with under 9 points. If you are a qualified Gas Engineer / Heating Engineer and would be interested in discussing this role in further detail then please submit a full CV today.
Jun 11, 2025
Full time
Gas Engineer / Heating Engineer Domestic Environments Servicing, Breakdowns & Installations London Weekly Pay Self Employed, Full Time Contractor 70K - 120K per annum . Due to increased demand in work load, we are actively recruiting for a qualified Gas Engineer / Heating Engineer (to CCN1 standard) to work on a mobile basis to carry out servicing / maintenance, breakdowns and installation works across privately owned, customer homes in the London region. This is a franchise agreement for a self employed contractor, to work with the business on a full time, on-going basis. Earnings: Estimated 1,500 - 3,000 per week. 62.50 per hour Mon-Sun 07:00am-6:00pm 87.50 per hour Mon-Sun: 6:00pm - 00:00am 112.50 per hour 00:00am - 7:00am Or 50% of all Labour rate on priced works. Example Week: 25 hours per week with a customer: 1,562.50 ( 81,250 per annum) 30 hours per week with a customer: 1,875 ( 97,500) 35 hours per week with a customer: 2,187.50 ( 113,750) 35 hours per week with a customer + 6 hours overtime: 2,712.50 ( 141,050) 35 hours per week with a customer + 12 hours overtime: 3,237.50 ( 168,350) 35 hours per week with a customer + 6 hours evenings + 6 hours nights: 3,327.50 ( 173,030). Associated Costs: Working as a Plumber within this Franchise / Self Employed Contractor agreement, you will have associated costs, this includes: Company Van Rental (non-negotiable), fuel costs, parking costs, public liability insurance for your limited company, estimated annual cost: 15,000 per annum / 288 per week deducted from payments. Provided by the company: ULEZ, Congestion, Vehicle Insurance, Road Tax. Works / Duties: Carry out routine and reactive maintenance on domestic gas appliances and heating systems Install and commission domestic boilers, heating systems, and controls Diagnose and repair boiler breakdowns and gas-related faults Conduct landlord gas safety inspections (CP12s) and servicing Powerflushing and system cleansing Carry out radiator installations, heating upgrades, and zoning Support plumbing works on combined heating/plumbing projects Adhere to all relevant gas safety legislation and company procedures Provide excellent customer service in private homes, maintaining a tidy and respectful work environment Complete job reports, service records, and compliance documentation using a mobile system or paperwork Maintain a clean, stocked, and compliant van at all times Requirements: Must be able to commit to working full time, Monday - Friday, 08:00am - 5:00pm. Must be flexible with out of hours works in evenings or weekends when required (ie: 1 weekend per month). Must hold current ACS - CCN1 certificate and be Gas Safe Registered. Must have a minimum of 5 years experience as a Gas Engineer / Heating Engineer. Strong knowledge of domestic heating systems. Full UK driving licence with under 9 points. If you are a qualified Gas Engineer / Heating Engineer and would be interested in discussing this role in further detail then please submit a full CV today.
Shillito Executive Search have been appointed the sole supplier of Sheffield based machining technologies company who are looking to recruit a hands-on Applications Engineer with experience of programming. (ideally using Siemens NX). The Sheffield-based business supports a range of customers in providing machine tools and machine tool services within various industries including, nuclear, defence, power generation, offshore oil and gas and aerospace. The successful Application Engineer will be part of a team that will be involved with the next generation of UK defence programmes. As part of the program, the Applications Engineer will be working in partnership with the customer and new machine tool provider OEM. They will be a key part of a highly skilled team and thrive in delivering high-quality results and always be on the lookout for improvements. On-site, hands on work will be required, to assist with programming, tooling, work holding and cutting methodology on newly installed machine tools. Responsibilities of the role will include: Deliver programs through Siemens NX Deliver Programmer and operator training Carry out final commissioning on new installations including post processor prove outs - test pieces - tooling - etc. Be able to deliver alternative methods of machining high value parts within the team Engage with tooling companies to provide alternative tooling methods Experience in customer facing roles Travel to meet with European based OEM Ability to interact effectively with internal and external customers at all organisational levels. This is an interesting and varied role working on a one-of-a-kind, long-term project over the next decade in Sheffield. Shillito Executive Search specialises in finding top-tier executive talent for leadership, management, and board-level positions in the manufacturing industry. We have a deep understanding of the unique challenges and opportunities within the sector and pride ourselves on doing the right things well. People are our business. At Adept Resourcing - Commercial & Engineering, we specialise in connecting companies with top talent that drives innovation, growth and success. With our industry expertise, extensive network and personalised approach, we're here to help you.
Jun 10, 2025
Full time
Shillito Executive Search have been appointed the sole supplier of Sheffield based machining technologies company who are looking to recruit a hands-on Applications Engineer with experience of programming. (ideally using Siemens NX). The Sheffield-based business supports a range of customers in providing machine tools and machine tool services within various industries including, nuclear, defence, power generation, offshore oil and gas and aerospace. The successful Application Engineer will be part of a team that will be involved with the next generation of UK defence programmes. As part of the program, the Applications Engineer will be working in partnership with the customer and new machine tool provider OEM. They will be a key part of a highly skilled team and thrive in delivering high-quality results and always be on the lookout for improvements. On-site, hands on work will be required, to assist with programming, tooling, work holding and cutting methodology on newly installed machine tools. Responsibilities of the role will include: Deliver programs through Siemens NX Deliver Programmer and operator training Carry out final commissioning on new installations including post processor prove outs - test pieces - tooling - etc. Be able to deliver alternative methods of machining high value parts within the team Engage with tooling companies to provide alternative tooling methods Experience in customer facing roles Travel to meet with European based OEM Ability to interact effectively with internal and external customers at all organisational levels. This is an interesting and varied role working on a one-of-a-kind, long-term project over the next decade in Sheffield. Shillito Executive Search specialises in finding top-tier executive talent for leadership, management, and board-level positions in the manufacturing industry. We have a deep understanding of the unique challenges and opportunities within the sector and pride ourselves on doing the right things well. People are our business. At Adept Resourcing - Commercial & Engineering, we specialise in connecting companies with top talent that drives innovation, growth and success. With our industry expertise, extensive network and personalised approach, we're here to help you.
Job Title: Commercial Gas Engineer Location: London/Surrey Salary: Up to 60,000 w/ Van and Fuel Card Job Type: Permanent Daniel Owen are seeking a Commercial Gas Engineer to join a reputable maintenance contractor to work across Central London and surrounding areas. Commercial Gas Engineer Role: The role will involve reactive maintenance, servicing and installations in commercial and domestic environments The company have a mixture of contracts which range from high-end residential to large commercial buildings across Central London, Surrey, East London and surrounding areas This role will be a mix of domestic and commercial Commercial Gas Engineer Requirements: Full up to date ACS Commercial and Domestic Gas certificates 5+ years experience working with commercial gas Happy working on domestic as well as commercial Commercial Gas Engineer Benefits: Company Van and Fuel Card Annual leave allowance Company pension Life assurance Income protection If this role is of interest to you, please apply. LON123
Jun 10, 2025
Full time
Job Title: Commercial Gas Engineer Location: London/Surrey Salary: Up to 60,000 w/ Van and Fuel Card Job Type: Permanent Daniel Owen are seeking a Commercial Gas Engineer to join a reputable maintenance contractor to work across Central London and surrounding areas. Commercial Gas Engineer Role: The role will involve reactive maintenance, servicing and installations in commercial and domestic environments The company have a mixture of contracts which range from high-end residential to large commercial buildings across Central London, Surrey, East London and surrounding areas This role will be a mix of domestic and commercial Commercial Gas Engineer Requirements: Full up to date ACS Commercial and Domestic Gas certificates 5+ years experience working with commercial gas Happy working on domestic as well as commercial Commercial Gas Engineer Benefits: Company Van and Fuel Card Annual leave allowance Company pension Life assurance Income protection If this role is of interest to you, please apply. LON123
Our client a Social housing provider are seeking 2 domestic Gas Engineers to join their established team on 2-3 month sub contract basis covereing Wiltshire. The role is to deliver a high-quality gas servicing and responsive gas repairs in accordance with the current Gas Safety Regulations. Responsibilities will include servicing and repair works on all gas installations within domestic properties including fires, heating, hot water systems and cookers as well some associated plumbing, Ability to work on your own and also as part of the team to ensure targets are met. It is essential / desirable you have the following criteria: Experience in gas servicing and repairs on modern gas condensing boilers, You will ideally hold: ACS accreditation in CCN1, CEN1, WAT1 (CENWAT), CPA1, CKR1, HTR1, UVHW Experience of oil boiler service and repairs both domestic and commercial and/or commercial gas boiler service and repair would be beneficial. Ideally previous work experience on domestic properties within the social housing environment, you will need to have your own van, tools and calibrated gas analyser as well as your own company insurances. If you would like more information or to apply for this vacancy, please send us your CV in word format to the email address assigned to this advert.
Jun 09, 2025
Seasonal
Our client a Social housing provider are seeking 2 domestic Gas Engineers to join their established team on 2-3 month sub contract basis covereing Wiltshire. The role is to deliver a high-quality gas servicing and responsive gas repairs in accordance with the current Gas Safety Regulations. Responsibilities will include servicing and repair works on all gas installations within domestic properties including fires, heating, hot water systems and cookers as well some associated plumbing, Ability to work on your own and also as part of the team to ensure targets are met. It is essential / desirable you have the following criteria: Experience in gas servicing and repairs on modern gas condensing boilers, You will ideally hold: ACS accreditation in CCN1, CEN1, WAT1 (CENWAT), CPA1, CKR1, HTR1, UVHW Experience of oil boiler service and repairs both domestic and commercial and/or commercial gas boiler service and repair would be beneficial. Ideally previous work experience on domestic properties within the social housing environment, you will need to have your own van, tools and calibrated gas analyser as well as your own company insurances. If you would like more information or to apply for this vacancy, please send us your CV in word format to the email address assigned to this advert.
Randstad Construction & Property
Edinburgh, Midlothian
Are you an Air Conditioning Engineer looking for your next opportunity? Would you like to work in a renowned company which offers up skill and training? Randstad Construction & Property are working on behalf of a National Facilities Management company to find an experienced and collaborative Air Conditioning Engineer to join their team covering Edinburgh. The successful candidate will be responsible for carrying out PPMs and reactive maintenance across different sites. Location: Edinburgh Salary: Competitive (up to 44,000 depending on experience) Employment type: Full-time, permanent, Monday-Friday Key benefits: Van Annual holidays Employer pension (including bank holidays) Company sick pay Cycle to work scheme Overtime rates Flexible working considered An average day will include the following: Carry out small works installations and repairs to the highest of standards. Undertake PPM, proactive and reactive works issued through the helpdesk within set time frames so that the customer expectations are met. Ensure that equipment operates to specified performance criteria. Evaluate performance and ensure the proper servicing and maintenance of equipment under contract to the company is carried out. Take a pro-active approach to client liaison and ensure that concerns are dealt with or related to management as necessary. Always be fully aware of contractual requirements and customer needs. Ensure that administration requirements are actioned on time and all necessary documents/records are maintained accurately. Provide callout response for the client as detailed on the callout rota. An ideal candidate will have: A full UK driving license Install experience Formal Apprenticeship and formal trade qualifications in an electrical field NVQ 6187 in refrigeration & Air Conditioning or equivalent FGAS qualification City & Guilds - 2079 safe handling of refrigerants An ideal candidate will be: Flexible and patient A team player Able to understand complex information and demonstrate attention to detail Remain professional and communicate strongly A can-do attitude If this sounds like you please get in touch by contacting Hannah Mitchell at Randstad C&P Newcastle Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Jun 04, 2025
Full time
Are you an Air Conditioning Engineer looking for your next opportunity? Would you like to work in a renowned company which offers up skill and training? Randstad Construction & Property are working on behalf of a National Facilities Management company to find an experienced and collaborative Air Conditioning Engineer to join their team covering Edinburgh. The successful candidate will be responsible for carrying out PPMs and reactive maintenance across different sites. Location: Edinburgh Salary: Competitive (up to 44,000 depending on experience) Employment type: Full-time, permanent, Monday-Friday Key benefits: Van Annual holidays Employer pension (including bank holidays) Company sick pay Cycle to work scheme Overtime rates Flexible working considered An average day will include the following: Carry out small works installations and repairs to the highest of standards. Undertake PPM, proactive and reactive works issued through the helpdesk within set time frames so that the customer expectations are met. Ensure that equipment operates to specified performance criteria. Evaluate performance and ensure the proper servicing and maintenance of equipment under contract to the company is carried out. Take a pro-active approach to client liaison and ensure that concerns are dealt with or related to management as necessary. Always be fully aware of contractual requirements and customer needs. Ensure that administration requirements are actioned on time and all necessary documents/records are maintained accurately. Provide callout response for the client as detailed on the callout rota. An ideal candidate will have: A full UK driving license Install experience Formal Apprenticeship and formal trade qualifications in an electrical field NVQ 6187 in refrigeration & Air Conditioning or equivalent FGAS qualification City & Guilds - 2079 safe handling of refrigerants An ideal candidate will be: Flexible and patient A team player Able to understand complex information and demonstrate attention to detail Remain professional and communicate strongly A can-do attitude If this sounds like you please get in touch by contacting Hannah Mitchell at Randstad C&P Newcastle Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Aquilo recruitment are excited to be partnering with a leading plumbing and heating business part of a social housing company who are recruting for a Commercial Engineer or a commercial gas engineer to join their growing team with opportunities of progression. Commercial Engineer Become part of the team, close knit friendly team covering numerous contracts across Lincolnshire including commercial, domestic, social, renewables and electrics. We currently are recruiting an experienced gas engineer to join our friendly team what you will do as a Commercial Engineer New boiler installations Repairs and maintenance Servicing Private domestic works New build works Social Housing works including full heating system replacements and reactive boiler replacements. Commercial and renewables where qualifications allow Who are we looking for in a Commercial Engineer Qualified gas engineer (domestic, commercial or both) The ability to work independently and use your own initiative Full driving licence Commercial gas, Oil, LPG, Solid fuel or Air source knowledge would be an advantage but not essential Hard working, flexible Team player What we offer to a Commercial Engineer Mon - Fri 8am - 4pm on-call operates on rota basis 1:9 Starting salary - £36,651 - £41,602 dependent on experience/quals Annual incentives Physio and counselling services 25 days holiday + bank holidays Van, fuel card and phone Health benefits Training and continual professional development Salary sacrifice schemes including a car leasing and Bike to work scheme Health & Safety Operative To be aware of risks to personal safety, other employees, customers, company property and company reputation and to highlight such risks to managers immediately Operative To ensure safe handling and storage of all plant and equipment, including regular checks on items for which you are responsible Operative To ensure any vehicle provided is checked for roadworthiness, safety, cleanliness and damage on a daily basis Manager To be aware of risks to personal safety, other employees, customers, company property & company reputation and to promote a culture of risk mitigation in the planning and execution of all tasks Equality & Diversity To promote equality and diversity amongst our stakeholders, residents, customers, clients, staff, board and committee members and all those we work with. To ensure all customers needs are understood and all services that are provided meet individual needs, including in relation to the protected characteristics and customers with additional support needs. To treat everyone with dignity and respect at all times.
Jun 04, 2025
Full time
Aquilo recruitment are excited to be partnering with a leading plumbing and heating business part of a social housing company who are recruting for a Commercial Engineer or a commercial gas engineer to join their growing team with opportunities of progression. Commercial Engineer Become part of the team, close knit friendly team covering numerous contracts across Lincolnshire including commercial, domestic, social, renewables and electrics. We currently are recruiting an experienced gas engineer to join our friendly team what you will do as a Commercial Engineer New boiler installations Repairs and maintenance Servicing Private domestic works New build works Social Housing works including full heating system replacements and reactive boiler replacements. Commercial and renewables where qualifications allow Who are we looking for in a Commercial Engineer Qualified gas engineer (domestic, commercial or both) The ability to work independently and use your own initiative Full driving licence Commercial gas, Oil, LPG, Solid fuel or Air source knowledge would be an advantage but not essential Hard working, flexible Team player What we offer to a Commercial Engineer Mon - Fri 8am - 4pm on-call operates on rota basis 1:9 Starting salary - £36,651 - £41,602 dependent on experience/quals Annual incentives Physio and counselling services 25 days holiday + bank holidays Van, fuel card and phone Health benefits Training and continual professional development Salary sacrifice schemes including a car leasing and Bike to work scheme Health & Safety Operative To be aware of risks to personal safety, other employees, customers, company property and company reputation and to highlight such risks to managers immediately Operative To ensure safe handling and storage of all plant and equipment, including regular checks on items for which you are responsible Operative To ensure any vehicle provided is checked for roadworthiness, safety, cleanliness and damage on a daily basis Manager To be aware of risks to personal safety, other employees, customers, company property & company reputation and to promote a culture of risk mitigation in the planning and execution of all tasks Equality & Diversity To promote equality and diversity amongst our stakeholders, residents, customers, clients, staff, board and committee members and all those we work with. To ensure all customers needs are understood and all services that are provided meet individual needs, including in relation to the protected characteristics and customers with additional support needs. To treat everyone with dignity and respect at all times.
Heating Engineer, Central Belt, Salary from £37,000 to £40,000 per annum + Overtime + Company Van! Heating Engineer opporunity to join a leading Facilities Management company, specialising in plantroom and boilerhouse installations across commercial sites. This is a fantastic opportunity to apply your technical expertise across varied projects involving heating, plumbing, and chilled water systems. Engineer's Benefits: Attractive Salary Earn between £37,000 and £40,000 per year, with opportunities for additional earnings through overtime. Company Vehicle Provided Receive a fully equipped van for work-related travel across the Central Belt and occasional project sites. Stable Employment Join a well-established and respected FM company offering long-term job security and career progression. Flexible Working Hours Primarily day shifts, with some night work as required by projects. Professional Development Work with skilled professionals in a supportive team, with ongoing training and development available. Engineer's Responsibilities: System Installation & Maintenance Install and maintain commercial heating, plumbing, and chilled water systems across a variety of commercial sites. Welding & Pipework Perform arc and gas welding on mild steel, stainless steel, copper, and galvanized materials using various fitting methods (press fit, Victaulic, brazed, soldered, etc.). Project Management Take ownership of jobs, working independently or as part of a small team, ensuring timely and professional delivery. Client Interaction Liaise directly with clients, providing excellent service and maintaining strong professional relationships. Engineer's Requirements: Qualified Heating Engineer or Pipefitter (Senior Craftsman status desirable) Proven experience with plantroom and boilerhouse installations Skilled in arc and gas welding Proficient with a range of materials and fitting techniques Able to manage own workload and projects independently Gas testing and purging skills (advantageous) Steam system experience (a plus, not essential) Confident and professional in client-facing environments Full UK driving licence required This is a brilliant opportunity to join a progressive FM company with a strong reputation and pipeline of projects. If you re an experienced Heating Engineer and ready for your next challenge, we d love to hear from you apply today! Note: Applicants must have the right to work in the UK. Visa sponsorship is not available for this role.
Jun 04, 2025
Full time
Heating Engineer, Central Belt, Salary from £37,000 to £40,000 per annum + Overtime + Company Van! Heating Engineer opporunity to join a leading Facilities Management company, specialising in plantroom and boilerhouse installations across commercial sites. This is a fantastic opportunity to apply your technical expertise across varied projects involving heating, plumbing, and chilled water systems. Engineer's Benefits: Attractive Salary Earn between £37,000 and £40,000 per year, with opportunities for additional earnings through overtime. Company Vehicle Provided Receive a fully equipped van for work-related travel across the Central Belt and occasional project sites. Stable Employment Join a well-established and respected FM company offering long-term job security and career progression. Flexible Working Hours Primarily day shifts, with some night work as required by projects. Professional Development Work with skilled professionals in a supportive team, with ongoing training and development available. Engineer's Responsibilities: System Installation & Maintenance Install and maintain commercial heating, plumbing, and chilled water systems across a variety of commercial sites. Welding & Pipework Perform arc and gas welding on mild steel, stainless steel, copper, and galvanized materials using various fitting methods (press fit, Victaulic, brazed, soldered, etc.). Project Management Take ownership of jobs, working independently or as part of a small team, ensuring timely and professional delivery. Client Interaction Liaise directly with clients, providing excellent service and maintaining strong professional relationships. Engineer's Requirements: Qualified Heating Engineer or Pipefitter (Senior Craftsman status desirable) Proven experience with plantroom and boilerhouse installations Skilled in arc and gas welding Proficient with a range of materials and fitting techniques Able to manage own workload and projects independently Gas testing and purging skills (advantageous) Steam system experience (a plus, not essential) Confident and professional in client-facing environments Full UK driving licence required This is a brilliant opportunity to join a progressive FM company with a strong reputation and pipeline of projects. If you re an experienced Heating Engineer and ready for your next challenge, we d love to hear from you apply today! Note: Applicants must have the right to work in the UK. Visa sponsorship is not available for this role.
Job description We are a well-established gas and heating services company based in the Midlands, seeking experienced and reliable self-employed Gas Engineers to join our growing team on a subcontract basis. You will be responsible for carrying out a range of domestic gas works including boiler installations, servicing, maintenance, and repairs. This is an excellent opportunity to work with a professional and supportive company with consistent workflow across the Midlands. Key Responsibilities: Installation of domestic gas boilers and heating systems Servicing and repairing domestic boilers and gas appliances Performing landlord gas safety checks (CP12s) Diagnosing faults and providing effective solutions Maintaining a high standard of workmanship and customer service Completing required documentation and certificates in a timely manner Requirements: Certifications: Gas Safe Registration (active and in date) Public Liability Insurance Minimum £2 million cover Full UK Driving Licence Tools & Equipment: Full set of hand tools Smartphone or tablet for job reporting and documentation PPE and workwear (company branding optional) What on Offer: Regular and consistent work across the Midlands Weekly payments - full time position also available Competitive daily rate (negotiable based on experience and qualifications) Opportunities to grow with a large, respected company Support from our in-house admin and scheduling team Expenses Temp-Perm Benefits: On-site parking Schedule: Day shift Monday to Friday Work Location: On the road
Jun 04, 2025
Full time
Job description We are a well-established gas and heating services company based in the Midlands, seeking experienced and reliable self-employed Gas Engineers to join our growing team on a subcontract basis. You will be responsible for carrying out a range of domestic gas works including boiler installations, servicing, maintenance, and repairs. This is an excellent opportunity to work with a professional and supportive company with consistent workflow across the Midlands. Key Responsibilities: Installation of domestic gas boilers and heating systems Servicing and repairing domestic boilers and gas appliances Performing landlord gas safety checks (CP12s) Diagnosing faults and providing effective solutions Maintaining a high standard of workmanship and customer service Completing required documentation and certificates in a timely manner Requirements: Certifications: Gas Safe Registration (active and in date) Public Liability Insurance Minimum £2 million cover Full UK Driving Licence Tools & Equipment: Full set of hand tools Smartphone or tablet for job reporting and documentation PPE and workwear (company branding optional) What on Offer: Regular and consistent work across the Midlands Weekly payments - full time position also available Competitive daily rate (negotiable based on experience and qualifications) Opportunities to grow with a large, respected company Support from our in-house admin and scheduling team Expenses Temp-Perm Benefits: On-site parking Schedule: Day shift Monday to Friday Work Location: On the road
Air Conditioning Engineer A mechanical company based in the Hampshire area are currently hiring for a Mobile air conditioning engineer. This is a mobile role in which you are required to travel to their offices in the Hampshire area on seperate occasions. Mobile Air Conditioning Engineer As a successful Air Conditioning Engineer you will: Carrying out Service / Maintenance Breakdown call outs Air Conditioning and Refrigeration installations. Qualifications required: NVQ Level 2 in Air Conditioning and Refrigeration and FGAS cat 1. Service/Maintenance experience on Air Conditioning and Refrigeration. Installation experience Air Conditioning and Refrigeration. Air Conditioning Engineer will live within reasonable travel to Hampshire If you are interested in this role please call apply with your updated CV and call Michaela at CBW Staffing Solutions.
Jun 04, 2025
Full time
Air Conditioning Engineer A mechanical company based in the Hampshire area are currently hiring for a Mobile air conditioning engineer. This is a mobile role in which you are required to travel to their offices in the Hampshire area on seperate occasions. Mobile Air Conditioning Engineer As a successful Air Conditioning Engineer you will: Carrying out Service / Maintenance Breakdown call outs Air Conditioning and Refrigeration installations. Qualifications required: NVQ Level 2 in Air Conditioning and Refrigeration and FGAS cat 1. Service/Maintenance experience on Air Conditioning and Refrigeration. Installation experience Air Conditioning and Refrigeration. Air Conditioning Engineer will live within reasonable travel to Hampshire If you are interested in this role please call apply with your updated CV and call Michaela at CBW Staffing Solutions.
