Senior Fire Engineer / Principal Fire Engineer Location: Reading, UK (Hybrid / Fully Remote) Salary: Competitive, dependent on experience Job Type: Full-time, Permanent About the Opportunity An established multidisciplinary engineering consultancy specialising in engineering and fire safety solutions is seeking an experienced Senior fire engineer or Principal Fire Engineer. Working across data centres, industrial facilities, commercial buildings and critical infrastructure, the successful candidate will lead fire strategies, fire risk assessments and technical engineering projects. Key Responsibilities Fire Engineering and Strategies Lead fire strategy development for new-build, refurbishment and existing-building projects. Deliver prescriptive and performance-based solutions in line with BS 9999, BS 9991, BS 7974 and Approved Document B. Assess means of escape, compartmentation, fire resistance, smoke control and evacuation arrangements. Prepare fire strategy reports and technical assessments. Review architectural, structural and MEP designs throughout project delivery. Fire Risk Assessments and Protection Lead FRAs across commercial, industrial, data centre and complex facilities. Assess risks associated with generators, electrical plant, fuel systems and battery energy storage. Review fire precautions and advise on compliance with relevant legislation, including the Regulatory Reform (Fire Safety) Order 2005. Review active fire protection systems, including sprinklers, water mist, gaseous suppression, AOVs and smoke control. Review fire alarm Cause & Effect matrices, contractor submissions and technical designs. Undertake or review fire modelling, smoke movement and evacuation assessments. Project Management and Leadership Lead projects, managing technical quality, budgets, programmes and deliverables. Liaise with clients, Building Control, fire authorities and multidisciplinary teams. Review technical reports, lead meetings and mentor junior engineers. Support tenders, fee proposals and business development. Requirements Essential Degree in Fire Engineering, Fire Safety Engineering, Mechanical Engineering or a related discipline. 7+ years' experience for Senior level or 10+ years for Principal level. Proven experience delivering fire strategies and fire risk assessments. Strong knowledge of UK Building Regulations, Approved Document B, BS 9999, BS 9991 and BS 7974. Experience with active and passive fire protection systems and smoke ventilation. Excellent technical reporting, project management and communication skills. Desirable CEng, MIFireE or equivalent professional membership, or working towards Chartership. Fire risk assessor certification or registration. Experience in data centres, industrial facilities, power generation or critical infrastructure. Familiarity with FDS, PyroSim, CFAST, Revit or AutoCAD. Knowledge of NFPA and FM Global standards. What Is on Offer? Competitive salary. 25 days annual leave plus bank holidays and birthday leave. Company pension. Flexible hybrid or fully remote working. Professional development and Chartership support. Exposure to challenging UK and international projects. Career progression into technical leadership. Supportive team environment, social events and discretionary bonuses. How to Apply If you are an experienced Senior fire engineer or Principal Fire Engineer looking for your next opportunity, please submit your CV and covering letter through the recruitment contact handling this vacancy. The organisation is an equal opportunities employer and welcomes applications from suitably qualified candidates.
Nov 22, 2026
Full time
Senior Fire Engineer / Principal Fire Engineer Location: Reading, UK (Hybrid / Fully Remote) Salary: Competitive, dependent on experience Job Type: Full-time, Permanent About the Opportunity An established multidisciplinary engineering consultancy specialising in engineering and fire safety solutions is seeking an experienced Senior fire engineer or Principal Fire Engineer. Working across data centres, industrial facilities, commercial buildings and critical infrastructure, the successful candidate will lead fire strategies, fire risk assessments and technical engineering projects. Key Responsibilities Fire Engineering and Strategies Lead fire strategy development for new-build, refurbishment and existing-building projects. Deliver prescriptive and performance-based solutions in line with BS 9999, BS 9991, BS 7974 and Approved Document B. Assess means of escape, compartmentation, fire resistance, smoke control and evacuation arrangements. Prepare fire strategy reports and technical assessments. Review architectural, structural and MEP designs throughout project delivery. Fire Risk Assessments and Protection Lead FRAs across commercial, industrial, data centre and complex facilities. Assess risks associated with generators, electrical plant, fuel systems and battery energy storage. Review fire precautions and advise on compliance with relevant legislation, including the Regulatory Reform (Fire Safety) Order 2005. Review active fire protection systems, including sprinklers, water mist, gaseous suppression, AOVs and smoke control. Review fire alarm Cause & Effect matrices, contractor submissions and technical designs. Undertake or review fire modelling, smoke movement and evacuation assessments. Project Management and Leadership Lead projects, managing technical quality, budgets, programmes and deliverables. Liaise with clients, Building Control, fire authorities and multidisciplinary teams. Review technical reports, lead meetings and mentor junior engineers. Support tenders, fee proposals and business development. Requirements Essential Degree in Fire Engineering, Fire Safety Engineering, Mechanical Engineering or a related discipline. 7+ years' experience for Senior level or 10+ years for Principal level. Proven experience delivering fire strategies and fire risk assessments. Strong knowledge of UK Building Regulations, Approved Document B, BS 9999, BS 9991 and BS 7974. Experience with active and passive fire protection systems and smoke ventilation. Excellent technical reporting, project management and communication skills. Desirable CEng, MIFireE or equivalent professional membership, or working towards Chartership. Fire risk assessor certification or registration. Experience in data centres, industrial facilities, power generation or critical infrastructure. Familiarity with FDS, PyroSim, CFAST, Revit or AutoCAD. Knowledge of NFPA and FM Global standards. What Is on Offer? Competitive salary. 25 days annual leave plus bank holidays and birthday leave. Company pension. Flexible hybrid or fully remote working. Professional development and Chartership support. Exposure to challenging UK and international projects. Career progression into technical leadership. Supportive team environment, social events and discretionary bonuses. How to Apply If you are an experienced Senior fire engineer or Principal Fire Engineer looking for your next opportunity, please submit your CV and covering letter through the recruitment contact handling this vacancy. The organisation is an equal opportunities employer and welcomes applications from suitably qualified candidates.
Job Title: Airworthiness & Certification Consultant (all levels considered) Location: Bristol / Remote Working Salary: £50,000 - £70,000 + Benefits Job Type: Full-Time Are you an Airworthiness Consultant looking for a remote working opportunity with a thriving UK engineering consultancy? We are a busy, growing, and highly successful consultancy seeking an Airworthiness & Certification Consultant to join our team. This role offers the flexibility to work from anywhere in the UK while delivering high-impact consultancy across complex defence and aerospace programmes. You will play a pivotal role in ensuring compliance with military and civil regulatory frameworks, shaping strategy, and mentoring the next generation of engineers. Key Responsibilities Deliver expert Airworthiness & Certification consultancy across relevant Military and Civil regulations (MAA, EASA, CAA, FAA, or equivalent). Provide technical leadership and assurance on key activities, including: Type Certification / Military Type Certification: Certification basis development, compliance demonstration, and managing deviations. Design Assurance & Control: Applying systems engineering principles to ensure design integrity and traceability. Safety Assessment: Executing and reviewing FHA, FMEA, FTA, and associated safety artefacts. Compliance & Standards: Interpreting and applying standards such as EASA CS, FAA FARs, Def Stan 00-970, and related frameworks. Configuration Management: Maintaining design documentation, change control, and audit trails. Advise clients on meeting complex regulatory and organizational obligations. Drive the continuous improvement of internal airworthiness tools, frameworks, and methodologies. Leading & Mentoring (for more senior applicants) Serve as a technical mentor to junior consultants, delivering guidance, feedback, and structured knowledge sharing. Support competency development across the team through coaching, training, and peer reviews. Exemplify professional standards and core values in all project engagements. Client Engagement (more senior applicants) Build and nurture trusted relationships with clients, regulators, and industry partners. Act as a primary technical interface to client Airworthiness Authorities, Certification Bodies, and Design Organisations. Translate complex regulatory and technical concepts into clear, actionable business advice. Identify organic business growth opportunities and cross-functional improvements within client projects. Governance, Quality & Assurance Ensure all technical deliverables meet rigorous internal quality standards and regulatory requirements. Participate in internal audits, assurance reviews, and process optimizations. Champion a strong safety culture and commitment to compliance across all engagements. Background, Skills & Qualifications Proven experience delivering Airworthiness & Certification projects within the UK defence or aerospace sectors. Deep technical expertise in one or more domain areas: Type Certification, Design Assurance, Safety Assessment (FHA/FMEA/FTA), Regulatory Liaison, or Configuration Management. Strong working knowledge of key regulatory frameworks (MAA, EASA, CAA, FAA). Excellent stakeholder engagement and communication skills, with experience interfacing directly with clients and regulatory bodies. Degree (BEng, BSc, MEng, MSc) in Aerospace, Mechanical, or Systems Engineering (or equivalent experience). Pragmatic, analytical problem solver with sharp attention to detail. Desirable additional criteria (more senior applicants) Chartered Engineer (CEng) status or actively working towards professional registration (RAeS, IET, IMechE). Experience leading small technical teams or discrete work packages in a consultancy environment. Familiarity with complex, multi-disciplinary systems in high-integrity environments. Exposure to digital tools and data-driven approaches for certification management. Security & Clearances Due to the nature of the projects, candidates must be eligible to undergo a standard DBS check and UK Security Clearance (SC). Why Join Us? Flexibility: Enjoy genuine, fully remote working from anywhere in the UK. Competitive Package: Excellent base salary reflective of your seniority and skill set. Impact & Culture: Join a supportive, highly skilled consultancy where your expertise directly influences high-profile national aerospace programmes. Diversity & Inclusion: We are an equal opportunities employer and proudly support the Armed Forces Covenant. We guarantee an interview to all UK military veterans, reservists, and their families who meet the essential criteria, supported by flexible policies for mobilization, deployment, and training. Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Nov 22, 2026
Full time
Job Title: Airworthiness & Certification Consultant (all levels considered) Location: Bristol / Remote Working Salary: £50,000 - £70,000 + Benefits Job Type: Full-Time Are you an Airworthiness Consultant looking for a remote working opportunity with a thriving UK engineering consultancy? We are a busy, growing, and highly successful consultancy seeking an Airworthiness & Certification Consultant to join our team. This role offers the flexibility to work from anywhere in the UK while delivering high-impact consultancy across complex defence and aerospace programmes. You will play a pivotal role in ensuring compliance with military and civil regulatory frameworks, shaping strategy, and mentoring the next generation of engineers. Key Responsibilities Deliver expert Airworthiness & Certification consultancy across relevant Military and Civil regulations (MAA, EASA, CAA, FAA, or equivalent). Provide technical leadership and assurance on key activities, including: Type Certification / Military Type Certification: Certification basis development, compliance demonstration, and managing deviations. Design Assurance & Control: Applying systems engineering principles to ensure design integrity and traceability. Safety Assessment: Executing and reviewing FHA, FMEA, FTA, and associated safety artefacts. Compliance & Standards: Interpreting and applying standards such as EASA CS, FAA FARs, Def Stan 00-970, and related frameworks. Configuration Management: Maintaining design documentation, change control, and audit trails. Advise clients on meeting complex regulatory and organizational obligations. Drive the continuous improvement of internal airworthiness tools, frameworks, and methodologies. Leading & Mentoring (for more senior applicants) Serve as a technical mentor to junior consultants, delivering guidance, feedback, and structured knowledge sharing. Support competency development across the team through coaching, training, and peer reviews. Exemplify professional standards and core values in all project engagements. Client Engagement (more senior applicants) Build and nurture trusted relationships with clients, regulators, and industry partners. Act as a primary technical interface to client Airworthiness Authorities, Certification Bodies, and Design Organisations. Translate complex regulatory and technical concepts into clear, actionable business advice. Identify organic business growth opportunities and cross-functional improvements within client projects. Governance, Quality & Assurance Ensure all technical deliverables meet rigorous internal quality standards and regulatory requirements. Participate in internal audits, assurance reviews, and process optimizations. Champion a strong safety culture and commitment to compliance across all engagements. Background, Skills & Qualifications Proven experience delivering Airworthiness & Certification projects within the UK defence or aerospace sectors. Deep technical expertise in one or more domain areas: Type Certification, Design Assurance, Safety Assessment (FHA/FMEA/FTA), Regulatory Liaison, or Configuration Management. Strong working knowledge of key regulatory frameworks (MAA, EASA, CAA, FAA). Excellent stakeholder engagement and communication skills, with experience interfacing directly with clients and regulatory bodies. Degree (BEng, BSc, MEng, MSc) in Aerospace, Mechanical, or Systems Engineering (or equivalent experience). Pragmatic, analytical problem solver with sharp attention to detail. Desirable additional criteria (more senior applicants) Chartered Engineer (CEng) status or actively working towards professional registration (RAeS, IET, IMechE). Experience leading small technical teams or discrete work packages in a consultancy environment. Familiarity with complex, multi-disciplinary systems in high-integrity environments. Exposure to digital tools and data-driven approaches for certification management. Security & Clearances Due to the nature of the projects, candidates must be eligible to undergo a standard DBS check and UK Security Clearance (SC). Why Join Us? Flexibility: Enjoy genuine, fully remote working from anywhere in the UK. Competitive Package: Excellent base salary reflective of your seniority and skill set. Impact & Culture: Join a supportive, highly skilled consultancy where your expertise directly influences high-profile national aerospace programmes. Diversity & Inclusion: We are an equal opportunities employer and proudly support the Armed Forces Covenant. We guarantee an interview to all UK military veterans, reservists, and their families who meet the essential criteria, supported by flexible policies for mobilization, deployment, and training. Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Maintenance Engineer Invergordon, Scotland Full-Time Permanent 40 Hours per Week Rotational Shift Pattern A well-established manufacturing business is looking to recruit a Maintenance Engineer to join its engineering team in Invergordon. This is a varied, hands-on role offering the opportunity to work across a wide range of electrical and mechanical equipment while supporting plant reliability, continuous improvement, and future investment projects. The Role Carry out planned and reactive maintenance across production equipment and plant machinery. Diagnose and rectify electrical and mechanical faults. Work on equipment including conveyors, elevators, pumps, packaging machinery, and associated plant systems. Read and interpret electrical drawings for fault finding and repairs. Support continuous improvement initiatives and plant upgrades. Contribute to engineering projects from design through to commissioning. Work closely with production and engineering teams to maximise plant performance. What We're Looking For Qualified electrician with strong mechanical aptitude and fault-finding skills. Experience within a manufacturing, processing, production, or industrial environment. Ability to work independently and as part of a multidisciplinary team. Good understanding of health, safety, and engineering best practice. Positive, flexible approach with a willingness to learn and develop new skills. What's on Offer? Competitive salary 32 days annual leave Overtime opportunities Company pension scheme Life assurance (4x salary) Ongoing training and career development Apprenticeship and progression opportunities Cycle-to-work and salary sacrifice schemes Employee assistance programme Excellent team culture and long-term career prospects If you're an electrically biased Maintenance Engineer looking for a varied role within a successful and growing manufacturing business, we'd love to hear from you.
Nov 22, 2026
Full time
Maintenance Engineer Invergordon, Scotland Full-Time Permanent 40 Hours per Week Rotational Shift Pattern A well-established manufacturing business is looking to recruit a Maintenance Engineer to join its engineering team in Invergordon. This is a varied, hands-on role offering the opportunity to work across a wide range of electrical and mechanical equipment while supporting plant reliability, continuous improvement, and future investment projects. The Role Carry out planned and reactive maintenance across production equipment and plant machinery. Diagnose and rectify electrical and mechanical faults. Work on equipment including conveyors, elevators, pumps, packaging machinery, and associated plant systems. Read and interpret electrical drawings for fault finding and repairs. Support continuous improvement initiatives and plant upgrades. Contribute to engineering projects from design through to commissioning. Work closely with production and engineering teams to maximise plant performance. What We're Looking For Qualified electrician with strong mechanical aptitude and fault-finding skills. Experience within a manufacturing, processing, production, or industrial environment. Ability to work independently and as part of a multidisciplinary team. Good understanding of health, safety, and engineering best practice. Positive, flexible approach with a willingness to learn and develop new skills. What's on Offer? Competitive salary 32 days annual leave Overtime opportunities Company pension scheme Life assurance (4x salary) Ongoing training and career development Apprenticeship and progression opportunities Cycle-to-work and salary sacrifice schemes Employee assistance programme Excellent team culture and long-term career prospects If you're an electrically biased Maintenance Engineer looking for a varied role within a successful and growing manufacturing business, we'd love to hear from you.
Are you an electronics or software engineer with experience co-ordinating projects? Or a project manager with experience managing electronics or software projects? If so, we want to hear from you! We have an exciting opportunity for an Advanced Project Engineer to join our Electronic Controllers team at Honeywell Aerospace in Yeovil. Honeywell Aerospace products and services are used on virtually every commercial, defence, and space aircraft. We build aircraft engines, cockpit and cabin electronics, wireless connectivity systems, mechanical components. Our hardware and software solutions help create more fuel-efficient aircraft, more direct and on-time flights and safer skies. The Yeovil site is a thriving design, development and manufacturing facility specialising in Environmental Control Systems and Life Support Systems. As part of the town's rich aviation heritage, the site boasts world class development and qualification testing facilities, and has produced numerous innovations in these product areas. Within the Yeovil Engineering department, the Electronic Controllers team is a multidisciplinary group that provides the core functionality of these systems, integrating specialised hardware and software to meet the stringent requirements associated with these high integrity systems. This is a hybrid role, featuring a 3 days in-office/2 days remote work model, with occasional travel to customer sites in the UK and Europe. Responsibilities Our project engineers ensure the successful delivery of high quality electronic controller solutions on time and within budget. Core responsibilities include: Leading the design, qualification and compliance of multiple aerospace electronic products from concept through to production. Collaborating with mechanical, electronics, firmware and software engineers to achieve technical requirements and objectives. Controlling the electronics project scope, including schedule, budget, and risk, along with scope change and baseline control. Managing design and phase gate reviews as well as progress status reporting, with key stakeholders within the organisation, and with customers. Providing engineering cost and effort estimates to proposals, to win new business. Demonstrating compliance with all requirements, quality processes and procedures. Partnering with other diverse engineering disciplines and teams both locally and globally, to achieve successful results. This varied role requires a wide range of technical and personal skills, determination, focus, and application, offering a unique opportunity to develop a successful and rewarding career in a world-renowned global aerospace company. Qualifications Essential: Degree or equivalent in electronics, software, aerospace engineering or a related field. Demonstrable experience in digital/analogue electronics design and/or embedded software design, to an extent that inspires confidence in the design team being led. Experience in requirements and configuration management, quality standards and documentation to a level commensurate with aerospace products and techniques for ensuring built in quality and safety. Conversant with and have experience in all facets of project management (including resource, cost and milestone planning, risk management, change management) using typical planning tools such as Microsoft Project. Experience in developing management operating systems for projects per AS9100 and Aerospace Procedures, or equivalent quality standards. Excellent verbal and written communication skills. Experience leading teams to achieve successful outcomes. Excellent problem-solving and analytical skills. Desired: Demonstrable experience with commercial or military aerospace governance standards, in particular RTCA/DO-160, DO-178 and DO-254. Experience with DOORs for requirements management, or SAP Advanced Product Quality Planning. What we offer: Work for a well-known brand with a strong focus on innovation and growth. Join a dynamic team with professional development opportunities, where most leaders are promoted from within. Access to medical, vision, dental, and mental health benefits Benefit from share investment plan and pension scheme. Be part of a culture that fosters inclusion, diversity, and innovation. Join a company that's reintroducing itself to the aviation community we've helped advance for more than a century. At Honeywell Aerospace (NASDAQ: HONA), we're launching as an independent, publicly traded aerospace and defense company built on a legacy of operational excellence and mission-focused execution. Our new brand identity pairs that heritage with real momentum, as we build technology that helps pilots navigate with confidence, aircraft operate more efficiently, and operators stay ahead of change. With our systems on board 90% of the world's aircraft, your work here has reach that's rare to find anywhere else. Focusing on our customers, investing in innovation, and building a culture of accountability and performance is how we're shaping what comes next. Every horizon. Every mission. Every day. We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Join a team recognized for leadership, innovation, and diversity.
Nov 22, 2026
Full time
Are you an electronics or software engineer with experience co-ordinating projects? Or a project manager with experience managing electronics or software projects? If so, we want to hear from you! We have an exciting opportunity for an Advanced Project Engineer to join our Electronic Controllers team at Honeywell Aerospace in Yeovil. Honeywell Aerospace products and services are used on virtually every commercial, defence, and space aircraft. We build aircraft engines, cockpit and cabin electronics, wireless connectivity systems, mechanical components. Our hardware and software solutions help create more fuel-efficient aircraft, more direct and on-time flights and safer skies. The Yeovil site is a thriving design, development and manufacturing facility specialising in Environmental Control Systems and Life Support Systems. As part of the town's rich aviation heritage, the site boasts world class development and qualification testing facilities, and has produced numerous innovations in these product areas. Within the Yeovil Engineering department, the Electronic Controllers team is a multidisciplinary group that provides the core functionality of these systems, integrating specialised hardware and software to meet the stringent requirements associated with these high integrity systems. This is a hybrid role, featuring a 3 days in-office/2 days remote work model, with occasional travel to customer sites in the UK and Europe. Responsibilities Our project engineers ensure the successful delivery of high quality electronic controller solutions on time and within budget. Core responsibilities include: Leading the design, qualification and compliance of multiple aerospace electronic products from concept through to production. Collaborating with mechanical, electronics, firmware and software engineers to achieve technical requirements and objectives. Controlling the electronics project scope, including schedule, budget, and risk, along with scope change and baseline control. Managing design and phase gate reviews as well as progress status reporting, with key stakeholders within the organisation, and with customers. Providing engineering cost and effort estimates to proposals, to win new business. Demonstrating compliance with all requirements, quality processes and procedures. Partnering with other diverse engineering disciplines and teams both locally and globally, to achieve successful results. This varied role requires a wide range of technical and personal skills, determination, focus, and application, offering a unique opportunity to develop a successful and rewarding career in a world-renowned global aerospace company. Qualifications Essential: Degree or equivalent in electronics, software, aerospace engineering or a related field. Demonstrable experience in digital/analogue electronics design and/or embedded software design, to an extent that inspires confidence in the design team being led. Experience in requirements and configuration management, quality standards and documentation to a level commensurate with aerospace products and techniques for ensuring built in quality and safety. Conversant with and have experience in all facets of project management (including resource, cost and milestone planning, risk management, change management) using typical planning tools such as Microsoft Project. Experience in developing management operating systems for projects per AS9100 and Aerospace Procedures, or equivalent quality standards. Excellent verbal and written communication skills. Experience leading teams to achieve successful outcomes. Excellent problem-solving and analytical skills. Desired: Demonstrable experience with commercial or military aerospace governance standards, in particular RTCA/DO-160, DO-178 and DO-254. Experience with DOORs for requirements management, or SAP Advanced Product Quality Planning. What we offer: Work for a well-known brand with a strong focus on innovation and growth. Join a dynamic team with professional development opportunities, where most leaders are promoted from within. Access to medical, vision, dental, and mental health benefits Benefit from share investment plan and pension scheme. Be part of a culture that fosters inclusion, diversity, and innovation. Join a company that's reintroducing itself to the aviation community we've helped advance for more than a century. At Honeywell Aerospace (NASDAQ: HONA), we're launching as an independent, publicly traded aerospace and defense company built on a legacy of operational excellence and mission-focused execution. Our new brand identity pairs that heritage with real momentum, as we build technology that helps pilots navigate with confidence, aircraft operate more efficiently, and operators stay ahead of change. With our systems on board 90% of the world's aircraft, your work here has reach that's rare to find anywhere else. Focusing on our customers, investing in innovation, and building a culture of accountability and performance is how we're shaping what comes next. Every horizon. Every mission. Every day. We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Join a team recognized for leadership, innovation, and diversity.
As an Electronics Design Engineer at Honeywell Aerospace , you will play a crucial role in the design and development of advanced electrical systems within our Satellite Communications business. Your expertise will contribute to the successful implementation of innovative solutions that enhance our product offerings and drive customer satisfaction. You will be joining a well-established Satellite Communications team based in Tewkesbury. We create Satellite and Terrestrial communication solutions for aircraft ranging from commercial jets to autonomous drones. The multi-disciplined team includes Systems, RF, Electrical, DSP, and Network engineers all collaborating to produce exciting products. We have several technologies that operate in the L and K bands across a range of platforms. We are actively involved in Government initiatives in this domain, notably ARTES and IRIS. You will report directly to our Engineering Manager and you'll work out of our Tewkesbury, UK location on a Hybrid work schedule. Join a company that's reintroducing itself to the aviation community we've helped advance for more than a century. At Honeywell Aerospace (NASDAQ: HONA), we're launching as an independent, publicly traded aerospace and defense company built on a legacy of operational excellence and mission-focused execution. Our new brand identity pairs that heritage with real momentum, as we build technology that helps pilots navigate with confidence, aircraft operate more efficiently, and operators stay ahead of change. With our systems on board 90% of the world's aircraft, your work here has reach that's rare to find anywhere else. Focusing on our customers, investing in innovation, and building a culture of accountability and performance is how we're shaping what comes next. Every horizon. Every mission. Every day. Honeywell Aerospace products and services are used on virtually every commercial, defence, and space aircraft. We build aircraft engines, cockpit and cabin electronics, wireless connectivity systems, mechanical components. Our hardware and software solutions help create more fuel-efficient aircraft, more direct and on-time flights and safer skies. Safer, More Fuel-Efficient Flying and Innovations for the Future of Aviation Key Responsibilities Design circuits that meet the requirements and regulatory standards. Capable of reading and understanding schematics, design specifications and test requirements with a good attention to detail and ability to follow concise processes Design and develop electronic systems for satellite communication applications. This will include mixed analogue and digital electronics, DC PSU's and microcontrollers Designing for Thermal, Vibration and other environmental considerations Experience working with component suppliers, reviewing parts specifications to ensure that design goals are met. Working with Manufactures to ensure that boards are built to specification Collaborating with RF Wireless, Software and Mechanical teams to integrate and validate designs. A good general knowledge of Satellite Communication systems. Understanding the basic principles of communication with satellites at different orbits Carry out hands-on soldering, rapid prototyping, and bench testing as part of iterative development Must Have Skills Bachelor's degree from an accredited institution in a technical discipline such as science, technology, engineering, mathematics. Minimum of 2 years of experience in electrical engineering. Strong knowledge of electrical design principles and systems. Experience with simulation and analysis tools relevant to electrical engineering. Good soldering skills (SMD and THT). Be familiar with the usage of common test equipment such as DMM, Oscilloscopes, Logic Analysers etc. DESIRABLE Familiarity with aerospace design standards such as RTCA and ARINC. Experience with PCB Design using ECAD Tools (KiCad, Mentor Xpedition etc.). Our offer Competitive salary and performance-based incentives. Opportunities for professional development and career advancement. A dynamic and inclusive work environment that fosters innovation and growth. A culture that fosters inclusion, diversity, and innovation in an international work environment Market specific training and ongoing personal development. Experienced leaders to support your professional development We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.
Nov 22, 2026
Full time
As an Electronics Design Engineer at Honeywell Aerospace , you will play a crucial role in the design and development of advanced electrical systems within our Satellite Communications business. Your expertise will contribute to the successful implementation of innovative solutions that enhance our product offerings and drive customer satisfaction. You will be joining a well-established Satellite Communications team based in Tewkesbury. We create Satellite and Terrestrial communication solutions for aircraft ranging from commercial jets to autonomous drones. The multi-disciplined team includes Systems, RF, Electrical, DSP, and Network engineers all collaborating to produce exciting products. We have several technologies that operate in the L and K bands across a range of platforms. We are actively involved in Government initiatives in this domain, notably ARTES and IRIS. You will report directly to our Engineering Manager and you'll work out of our Tewkesbury, UK location on a Hybrid work schedule. Join a company that's reintroducing itself to the aviation community we've helped advance for more than a century. At Honeywell Aerospace (NASDAQ: HONA), we're launching as an independent, publicly traded aerospace and defense company built on a legacy of operational excellence and mission-focused execution. Our new brand identity pairs that heritage with real momentum, as we build technology that helps pilots navigate with confidence, aircraft operate more efficiently, and operators stay ahead of change. With our systems on board 90% of the world's aircraft, your work here has reach that's rare to find anywhere else. Focusing on our customers, investing in innovation, and building a culture of accountability and performance is how we're shaping what comes next. Every horizon. Every mission. Every day. Honeywell Aerospace products and services are used on virtually every commercial, defence, and space aircraft. We build aircraft engines, cockpit and cabin electronics, wireless connectivity systems, mechanical components. Our hardware and software solutions help create more fuel-efficient aircraft, more direct and on-time flights and safer skies. Safer, More Fuel-Efficient Flying and Innovations for the Future of Aviation Key Responsibilities Design circuits that meet the requirements and regulatory standards. Capable of reading and understanding schematics, design specifications and test requirements with a good attention to detail and ability to follow concise processes Design and develop electronic systems for satellite communication applications. This will include mixed analogue and digital electronics, DC PSU's and microcontrollers Designing for Thermal, Vibration and other environmental considerations Experience working with component suppliers, reviewing parts specifications to ensure that design goals are met. Working with Manufactures to ensure that boards are built to specification Collaborating with RF Wireless, Software and Mechanical teams to integrate and validate designs. A good general knowledge of Satellite Communication systems. Understanding the basic principles of communication with satellites at different orbits Carry out hands-on soldering, rapid prototyping, and bench testing as part of iterative development Must Have Skills Bachelor's degree from an accredited institution in a technical discipline such as science, technology, engineering, mathematics. Minimum of 2 years of experience in electrical engineering. Strong knowledge of electrical design principles and systems. Experience with simulation and analysis tools relevant to electrical engineering. Good soldering skills (SMD and THT). Be familiar with the usage of common test equipment such as DMM, Oscilloscopes, Logic Analysers etc. DESIRABLE Familiarity with aerospace design standards such as RTCA and ARINC. Experience with PCB Design using ECAD Tools (KiCad, Mentor Xpedition etc.). Our offer Competitive salary and performance-based incentives. Opportunities for professional development and career advancement. A dynamic and inclusive work environment that fosters innovation and growth. A culture that fosters inclusion, diversity, and innovation in an international work environment Market specific training and ongoing personal development. Experienced leaders to support your professional development We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.
Kingscroft Professional Resources
Halesowen, West Midlands
Are you a Design Engineer or Project Engineer with a background in Design Engineering and Product Development Are you confident with Design Engineering projects involving sheet metal, mechanical and electro-mechanical components. Can you help support wider cross functional teams working on design changes , creating and managing BOMs , using MRP systems and updating design data to ensure ongoing product success Kingscroft have been asked to recruit for a Design Engineer by a specialist manufacturing business. As the ideal candidate you will have experience of working in complex manufacturing environments creating designs of mainly mechanical systems and helping to control and deliver projects through engineering change and delivery phases. Our client is open to talking to candidates at all phases of their career and would encourage applications from engineering graduates and more experienced technical engineers. Daily Duties to Include: Product Design using 3D CAD Bill of materials maintenance within MRP system. New Bill of Materials generation within MRP System. New purchased part number set up . PCO (Product Change Order) generation, release and distribution for engineering related activities. Attend team meetings to understand workload and assist in priority request actioning. Liaise with cross functional teams to take on board information for action requests and also communicate out changes implemented to relevant teams. Support Continuous improvement activities Support NPI and NPD activities This is a fantastic opportunity to join a really well positioned organisation in a Design & Projects role that is central to helping deliver engineering projects. Please apply today for a confidential discussion on the role, the company and opportunity. By applying to this role, you will register as a candidate with Kingscroft Professional Resources. Our Privacy Policy explains how we will use your information.
Nov 22, 2026
Full time
Are you a Design Engineer or Project Engineer with a background in Design Engineering and Product Development Are you confident with Design Engineering projects involving sheet metal, mechanical and electro-mechanical components. Can you help support wider cross functional teams working on design changes , creating and managing BOMs , using MRP systems and updating design data to ensure ongoing product success Kingscroft have been asked to recruit for a Design Engineer by a specialist manufacturing business. As the ideal candidate you will have experience of working in complex manufacturing environments creating designs of mainly mechanical systems and helping to control and deliver projects through engineering change and delivery phases. Our client is open to talking to candidates at all phases of their career and would encourage applications from engineering graduates and more experienced technical engineers. Daily Duties to Include: Product Design using 3D CAD Bill of materials maintenance within MRP system. New Bill of Materials generation within MRP System. New purchased part number set up . PCO (Product Change Order) generation, release and distribution for engineering related activities. Attend team meetings to understand workload and assist in priority request actioning. Liaise with cross functional teams to take on board information for action requests and also communicate out changes implemented to relevant teams. Support Continuous improvement activities Support NPI and NPD activities This is a fantastic opportunity to join a really well positioned organisation in a Design & Projects role that is central to helping deliver engineering projects. Please apply today for a confidential discussion on the role, the company and opportunity. By applying to this role, you will register as a candidate with Kingscroft Professional Resources. Our Privacy Policy explains how we will use your information.
Mechanical Fitter An established engineering manufacturer is seeking an experienced Mechanical Fitter to join its production team. This role involves the assembly, installation, and preparation of large mechanical and electro-mechanical equipment to meet quality, safety, and customer requirements. The successful candidate will play a key part in final assembly operations, ensuring products are built to specification and delivered to the highest standards. Key Responsibilities: Carry out final assembly, pre-test, and post-test activities on manufactured equipment. Prepare fabricated tanks, assemblies, and associated components for installation. Install core and winding assemblies into fabricated tanks, ensuring all components are fitted safely and accurately. Complete internal electrical connections and terminations in line with engineering specifications. Fill units with insulating oil and ensure all procedures are completed within designated timescales. Fit lids, radiators, conservators, instruments, valves, switches, nameplates, and associated pipework. Ensure assemblies are free from damage, contamination, and meet required quality standards. Safely use cranes, lifting equipment, and slinging techniques during installation activities. Complete all quality control and customer documentation accurately. Work to production schedules and support delivery against deadlines. Adhere to all health and safety policies and procedures. Support other production activities and undertake reasonable duties as requested by management. Beneficial Skills / Qualifications: Experience in a mechanical fitting, assembly, or manufacturing environment. Ability to read and interpret engineering and mechanical drawings. Experience using lifting equipment, including cranes and slinging operations. Strong understanding of health and safety requirements within an engineering environment. Ability to work independently and as part of a team. Good communication and organisational skills. Ability to follow written and verbal instructions accurately. Apprenticeship or formal training in Mechanical Engineering. Proactive and self-motivated. Quality-focused with a strong attention to detail. Reliable and committed to meeting production deadlines. Team player with a positive approach to problem solving. Flexible and willing to support business needs when required. Additional Information: Days & Afternoons - Mon - Friday Competitive pay Opportunity to develop
Nov 22, 2026
Full time
Mechanical Fitter An established engineering manufacturer is seeking an experienced Mechanical Fitter to join its production team. This role involves the assembly, installation, and preparation of large mechanical and electro-mechanical equipment to meet quality, safety, and customer requirements. The successful candidate will play a key part in final assembly operations, ensuring products are built to specification and delivered to the highest standards. Key Responsibilities: Carry out final assembly, pre-test, and post-test activities on manufactured equipment. Prepare fabricated tanks, assemblies, and associated components for installation. Install core and winding assemblies into fabricated tanks, ensuring all components are fitted safely and accurately. Complete internal electrical connections and terminations in line with engineering specifications. Fill units with insulating oil and ensure all procedures are completed within designated timescales. Fit lids, radiators, conservators, instruments, valves, switches, nameplates, and associated pipework. Ensure assemblies are free from damage, contamination, and meet required quality standards. Safely use cranes, lifting equipment, and slinging techniques during installation activities. Complete all quality control and customer documentation accurately. Work to production schedules and support delivery against deadlines. Adhere to all health and safety policies and procedures. Support other production activities and undertake reasonable duties as requested by management. Beneficial Skills / Qualifications: Experience in a mechanical fitting, assembly, or manufacturing environment. Ability to read and interpret engineering and mechanical drawings. Experience using lifting equipment, including cranes and slinging operations. Strong understanding of health and safety requirements within an engineering environment. Ability to work independently and as part of a team. Good communication and organisational skills. Ability to follow written and verbal instructions accurately. Apprenticeship or formal training in Mechanical Engineering. Proactive and self-motivated. Quality-focused with a strong attention to detail. Reliable and committed to meeting production deadlines. Team player with a positive approach to problem solving. Flexible and willing to support business needs when required. Additional Information: Days & Afternoons - Mon - Friday Competitive pay Opportunity to develop
Ernest Gordon Recruitment Limited
Bradford, Yorkshire
Mechanical Design Engineer (Progression to senior) £38,000 - £40,000 + Progression to Senior + External Training Courses + Private Healthcare + 33 Days Holiday Bradford Are you a Mechanical Design Engineer with experience in 3D design, looking to take the next step in your career, joining a bigger company with clear paths of progression to senior level? Do you want to join a company that invests in its employees, offering funded external training, including Level 4 qualifications, HNCs and Project Management courses? In this role, you will work alongside the mechanical engineering team, producing technical drawings for specialist electrical equipment, including power distribution and control equipment. You will receive electrical training, with opportunities to gain further qualifications and progress into senior roles. This company is a medium sized manufacturer of specialist electrical equipment, supplying low and medium-voltage power distribution systems to industries including oil, gas and power generation. Part of a large international group, they are continuing to expand and grow, offering excellent training, career progression and long-term stability. This role would suit a Mechanical Design Engineer with 3D design experience, looking to develop their technical skills through further training and qualifications, whilst progressing into senior roles within a well-established, growing company. The Role: Produce 2D and 3D mechanical designs and technical drawings for specialist electrical equipment Assist with project costing, scoping and managing project timelines Funded external training, with clear paths of progression to a senior role Monday-Friday, 37.5 hours per week, with hybrid working available The Person: Mechanical Design Engineer 3D CAD experience Reference Number: BBBH 28328 Mechanical Design Engineer, 2D, 3D, SolidWorks, Solid Edge, Autodesk, Project Engineering, Manufacturing, Switchgear, Bradford If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Nov 22, 2026
Full time
Mechanical Design Engineer (Progression to senior) £38,000 - £40,000 + Progression to Senior + External Training Courses + Private Healthcare + 33 Days Holiday Bradford Are you a Mechanical Design Engineer with experience in 3D design, looking to take the next step in your career, joining a bigger company with clear paths of progression to senior level? Do you want to join a company that invests in its employees, offering funded external training, including Level 4 qualifications, HNCs and Project Management courses? In this role, you will work alongside the mechanical engineering team, producing technical drawings for specialist electrical equipment, including power distribution and control equipment. You will receive electrical training, with opportunities to gain further qualifications and progress into senior roles. This company is a medium sized manufacturer of specialist electrical equipment, supplying low and medium-voltage power distribution systems to industries including oil, gas and power generation. Part of a large international group, they are continuing to expand and grow, offering excellent training, career progression and long-term stability. This role would suit a Mechanical Design Engineer with 3D design experience, looking to develop their technical skills through further training and qualifications, whilst progressing into senior roles within a well-established, growing company. The Role: Produce 2D and 3D mechanical designs and technical drawings for specialist electrical equipment Assist with project costing, scoping and managing project timelines Funded external training, with clear paths of progression to a senior role Monday-Friday, 37.5 hours per week, with hybrid working available The Person: Mechanical Design Engineer 3D CAD experience Reference Number: BBBH 28328 Mechanical Design Engineer, 2D, 3D, SolidWorks, Solid Edge, Autodesk, Project Engineering, Manufacturing, Switchgear, Bradford If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Job Title: Maintenance Planning Engineer Location: Plymouth - Hybrid 2+ days per week on-site Role Type: Permanent Salary: £45,000 - £57,000 depending on experience Our client, an established engineering consultancy, require an experienced Maintenance Planning Engineer to join their multi-disciplined team based in Plymouth. Please note we can only consider sole UK Nationals due to security clearance restrictions The role offers the opportunity to influence maintenance and investment decisions across complex, high-value assets while supporting operational performance and long-term business objectives within highly regulated industries. What the role of the Maintenance Planning Engineer entails: Some of the main duties of the Maintenance Planning Engineer will include: Maintenance Strategy Develop and optimise maintenance strategies for existing and future assets, balancing operational risk, performance and business requirements. Define preventive, predictive, condition-based and corrective maintenance approaches, reviewing task frequencies using asset performance data. Reliability Engineering Lead Reliability Centred Maintenance (RCM), maintenance task analysis and Failure Modes, Effects and Criticality Analysis (FMECA) studies. Asset Management & Lifecycle Support Support asset management plans, criticality assessments and lifecycle cost analysis to inform maintenance priorities and investment decisions. Provide maintenance and supportability input across asset acquisition, design, procurement, commissioning, modification and life-extension programmes. Governance & Assurance Develop and maintain maintenance procedures, technical guidance and engineering documentation. Support engineering assurance, audits, technical reviews and management of change processes, ensuring decisions are underpinned by robust technical justification and risk assessment. Stakeholder Engagement Collaborate with operations, maintenance, engineering and project teams, providing specialist advice on maintenance strategy and reliability improvement. Present technical findings to stakeholders and provide guidance to junior engineers and maintenance personnel where appropriate. What experience you need to be the successful Maintenance Planning Engineer: Degree or equivalent qualification in Mechanical Engineering, Electrical Engineering, Systems Engineering, Reliability Engineering, Asset Management or a related discipline. Significant experience in maintenance engineering, reliability engineering, asset management or supportability engineering. Experience within infrastructure, maritime, defence, nuclear, utilities, transport, energy, manufacturing or other asset-intensive industries. Experience developing maintenance strategies for complex engineering assets. Experience conducting reliability analyses, maintenance optimisation studies and failure investigations. Strong understanding of asset lifecycle management principles. Experience analysing maintenance, operational and performance data. Excellent technical report writing, communication and stakeholder engagement skills. Ability to balance operational performance, reliability requirements and lifecycle cost considerations. This really is a fantastic opportunity for a Maintenance Planning Engineer to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Nov 22, 2026
Full time
Job Title: Maintenance Planning Engineer Location: Plymouth - Hybrid 2+ days per week on-site Role Type: Permanent Salary: £45,000 - £57,000 depending on experience Our client, an established engineering consultancy, require an experienced Maintenance Planning Engineer to join their multi-disciplined team based in Plymouth. Please note we can only consider sole UK Nationals due to security clearance restrictions The role offers the opportunity to influence maintenance and investment decisions across complex, high-value assets while supporting operational performance and long-term business objectives within highly regulated industries. What the role of the Maintenance Planning Engineer entails: Some of the main duties of the Maintenance Planning Engineer will include: Maintenance Strategy Develop and optimise maintenance strategies for existing and future assets, balancing operational risk, performance and business requirements. Define preventive, predictive, condition-based and corrective maintenance approaches, reviewing task frequencies using asset performance data. Reliability Engineering Lead Reliability Centred Maintenance (RCM), maintenance task analysis and Failure Modes, Effects and Criticality Analysis (FMECA) studies. Asset Management & Lifecycle Support Support asset management plans, criticality assessments and lifecycle cost analysis to inform maintenance priorities and investment decisions. Provide maintenance and supportability input across asset acquisition, design, procurement, commissioning, modification and life-extension programmes. Governance & Assurance Develop and maintain maintenance procedures, technical guidance and engineering documentation. Support engineering assurance, audits, technical reviews and management of change processes, ensuring decisions are underpinned by robust technical justification and risk assessment. Stakeholder Engagement Collaborate with operations, maintenance, engineering and project teams, providing specialist advice on maintenance strategy and reliability improvement. Present technical findings to stakeholders and provide guidance to junior engineers and maintenance personnel where appropriate. What experience you need to be the successful Maintenance Planning Engineer: Degree or equivalent qualification in Mechanical Engineering, Electrical Engineering, Systems Engineering, Reliability Engineering, Asset Management or a related discipline. Significant experience in maintenance engineering, reliability engineering, asset management or supportability engineering. Experience within infrastructure, maritime, defence, nuclear, utilities, transport, energy, manufacturing or other asset-intensive industries. Experience developing maintenance strategies for complex engineering assets. Experience conducting reliability analyses, maintenance optimisation studies and failure investigations. Strong understanding of asset lifecycle management principles. Experience analysing maintenance, operational and performance data. Excellent technical report writing, communication and stakeholder engagement skills. Ability to balance operational performance, reliability requirements and lifecycle cost considerations. This really is a fantastic opportunity for a Maintenance Planning Engineer to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
60% mechanical, 40% electrical work Experience diagnosing and repairing mechanical, electromechanical & electronic Relevant qualification or apprenticeship- mechanical or electrical engineering Based Leicestershire, is a world leader in drilling technology for cooling holes in jet engines and gas turbines. The company designs and manufactures advanced machine systems in-house, serving customers across the UK and internationally. They're looking for a Field Service Engineer to join their team on a permanent basis. In this role, you'll be the technical backbone keeping their customers' equipment running smoothly, combining hands-on mechanical and electrical work with customer relationship management and the occasional opportunity to travel overseas. 60% mechanical, 40% electrical work on EDM, laser, and STEM drilling equipment used in aerospace and energy production Based in Leicestershire with flexible hours (8:15-17:30 Mon-Thu, 8:15-12:30 Fri) and periodic overseas travel opportunities Preferred Requirements Proven experience diagnosing and repairing mechanical, electromechanical, and electronic equipment Ability to troubleshoot customer concerns and communicate technical issues clearly to non-technical audiences Competence in aligning multi-axis machines to high tolerances, with the ability to read circuit diagrams Strong organisational and time management skills, with the capacity to work independently and adapt to changing priorities Valid UK driving licence with a clean driving record, as the role requires travel to customer sites Preferred Qualifications Relevant qualification or apprenticeship in mechanical engineering, electrical engineering, or a related technical discipline Formal training or certification in preventative maintenance or field service engineering Experience working in a regulated environment, particularly in aerospace or manufacturing sectors
Nov 22, 2026
Full time
60% mechanical, 40% electrical work Experience diagnosing and repairing mechanical, electromechanical & electronic Relevant qualification or apprenticeship- mechanical or electrical engineering Based Leicestershire, is a world leader in drilling technology for cooling holes in jet engines and gas turbines. The company designs and manufactures advanced machine systems in-house, serving customers across the UK and internationally. They're looking for a Field Service Engineer to join their team on a permanent basis. In this role, you'll be the technical backbone keeping their customers' equipment running smoothly, combining hands-on mechanical and electrical work with customer relationship management and the occasional opportunity to travel overseas. 60% mechanical, 40% electrical work on EDM, laser, and STEM drilling equipment used in aerospace and energy production Based in Leicestershire with flexible hours (8:15-17:30 Mon-Thu, 8:15-12:30 Fri) and periodic overseas travel opportunities Preferred Requirements Proven experience diagnosing and repairing mechanical, electromechanical, and electronic equipment Ability to troubleshoot customer concerns and communicate technical issues clearly to non-technical audiences Competence in aligning multi-axis machines to high tolerances, with the ability to read circuit diagrams Strong organisational and time management skills, with the capacity to work independently and adapt to changing priorities Valid UK driving licence with a clean driving record, as the role requires travel to customer sites Preferred Qualifications Relevant qualification or apprenticeship in mechanical engineering, electrical engineering, or a related technical discipline Formal training or certification in preventative maintenance or field service engineering Experience working in a regulated environment, particularly in aerospace or manufacturing sectors
Additional Resources Ltd
St. Albans, Hertfordshire
Do you have experience in CMM programming and inspecting components This could be your next opportunity An opportunity has arisen for a Quality Inspector / CMM Programmer professional to join an engineering consultancy providing specialist engineering solutions across design, development and manufacturing. As a Quality Inspector / CMM Programmer , you will carry out precision component inspections, operate CMM equipment and oversee quality documentation and compliance processes. This full-time permanent role based in St Albans offers salary range of £30,000 - £38,000 and benefits. You will be responsible for: Operate and programme CMMs to inspect precision CNC-machined components and verify dimensional accuracy. Interpret engineering drawings, technical specifications and GD&T requirements. Inspect tight-tolerance components using micrometers, verniers, gauges and other measuring equipment. Identify dimensional discrepancies and work with production to resolve inspection issues. Manage part serialisation, labelling, bagging, etching and marking in line with drawing instructions. Maintain inspection reports, batch records, quality documentation and traceability records. Manage NCRs, liaise with suppliers and maintain quality procedures, registers, filing systems and documentation. What we are looking for: Approx. 3 years' experience in mechanical quality inspection. Experience operating CMM equipment within a precision engineering or manufacturing environment. Background in programming CMMs, including developing or amending inspection programmes. Experience using measuring equipment for dimensional inspection, such as micrometers, verniers or gauges. Understanding of dimensional inspection, measurement accuracy and quality assurance procedures. Confident interpreting engineering drawings, dimensional tolerances and GD&T. Good IT skills, including Microsoft Office and electronic filing systems. Good written and spoken English. Right to work in the UK. The candidates from the following background will be considered: CMM Inspector, CMM Programmer, CMM Engineer, CMM Operator, Quality Inspector, Quality Technician, Quality Control Inspector, Quality Assurance Engineer, QC Inspector, QA Inspector, QC Technician, QA Technician, Mechanical Inspector, Manufacturing Inspector, Dimensional Inspector, Metrology Technician, Metrology Engineer, Metrologist, Calibration Technician, Calibration Metrologist, PC-DMIS Programmer, First Article Inspector, CNC Quality Inspector, Quality Compliance Inspector What's on offer: Competitive Salary. Company pension. Life insurance. Free on-site parking. Company events. Private medical insurance. Apply today if you have CMM programming experience and a background in precision mechanical inspection, with the opportunity to take ownership of quality and compliance activities. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us. Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Nov 22, 2026
Full time
Do you have experience in CMM programming and inspecting components This could be your next opportunity An opportunity has arisen for a Quality Inspector / CMM Programmer professional to join an engineering consultancy providing specialist engineering solutions across design, development and manufacturing. As a Quality Inspector / CMM Programmer , you will carry out precision component inspections, operate CMM equipment and oversee quality documentation and compliance processes. This full-time permanent role based in St Albans offers salary range of £30,000 - £38,000 and benefits. You will be responsible for: Operate and programme CMMs to inspect precision CNC-machined components and verify dimensional accuracy. Interpret engineering drawings, technical specifications and GD&T requirements. Inspect tight-tolerance components using micrometers, verniers, gauges and other measuring equipment. Identify dimensional discrepancies and work with production to resolve inspection issues. Manage part serialisation, labelling, bagging, etching and marking in line with drawing instructions. Maintain inspection reports, batch records, quality documentation and traceability records. Manage NCRs, liaise with suppliers and maintain quality procedures, registers, filing systems and documentation. What we are looking for: Approx. 3 years' experience in mechanical quality inspection. Experience operating CMM equipment within a precision engineering or manufacturing environment. Background in programming CMMs, including developing or amending inspection programmes. Experience using measuring equipment for dimensional inspection, such as micrometers, verniers or gauges. Understanding of dimensional inspection, measurement accuracy and quality assurance procedures. Confident interpreting engineering drawings, dimensional tolerances and GD&T. Good IT skills, including Microsoft Office and electronic filing systems. Good written and spoken English. Right to work in the UK. The candidates from the following background will be considered: CMM Inspector, CMM Programmer, CMM Engineer, CMM Operator, Quality Inspector, Quality Technician, Quality Control Inspector, Quality Assurance Engineer, QC Inspector, QA Inspector, QC Technician, QA Technician, Mechanical Inspector, Manufacturing Inspector, Dimensional Inspector, Metrology Technician, Metrology Engineer, Metrologist, Calibration Technician, Calibration Metrologist, PC-DMIS Programmer, First Article Inspector, CNC Quality Inspector, Quality Compliance Inspector What's on offer: Competitive Salary. Company pension. Life insurance. Free on-site parking. Company events. Private medical insurance. Apply today if you have CMM programming experience and a background in precision mechanical inspection, with the opportunity to take ownership of quality and compliance activities. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us. Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Critical Infrastructure Project Engineer London Permanent £110,000 - £140,000 Ncounter is supporting the growth of a major global technology environment, with an opportunity for an ambitious engineer to help shape the physical infrastructure behind large-scale, high-performance computing. This is an engineering-led position combining electrical infrastructure expertise with technical project delivery. You'll work across major infrastructure developments internationally, helping design, coordinate and deliver the power and supporting systems required for increasingly demanding compute environments. You'll gain exposure to significant engineering projects while working with specialist consultants, contractors, equipment manufacturers and internal technology teams. What you'll be working on: • Electrical power distribution across critical infrastructure environments, including MV/LV switchgear, transformers, generators and UPS systems • Reviewing electrical designs, control diagrams, specifications and proposed engineering solutions • Supporting single-phase and three-phase power calculations, capacity planning and infrastructure resilience • Coordinating engineering consultants, contractors, vendors and equipment suppliers through design, delivery and commissioning • Working alongside mechanical specialists across cooling, HVAC and wider M&E infrastructure • Supporting new data-centre capacity, infrastructure expansions and technically complex office environments • Helping establish consistent engineering standards as the global technology estate continues to scale What we're looking for: You'll have a strong technical engineering foundation, ideally within electrical engineering, building services, critical infrastructure, data centres or a specialist engineering consultancy. You should understand power distribution and be comfortable reading technical drawings and challenging engineering decisions. Previous financial-services experience is not required. More important is the ability to combine genuine engineering knowledge with the organisation and communication needed to coordinate complex projects and technical stakeholders. International travel will be required, sometimes for extended periods, although there is no regular on-call requirement. For an engineer looking to move beyond individual systems and influence infrastructure at significant global scale, contact Ncounter to discuss the opportunity in confidence.
Nov 22, 2026
Full time
Critical Infrastructure Project Engineer London Permanent £110,000 - £140,000 Ncounter is supporting the growth of a major global technology environment, with an opportunity for an ambitious engineer to help shape the physical infrastructure behind large-scale, high-performance computing. This is an engineering-led position combining electrical infrastructure expertise with technical project delivery. You'll work across major infrastructure developments internationally, helping design, coordinate and deliver the power and supporting systems required for increasingly demanding compute environments. You'll gain exposure to significant engineering projects while working with specialist consultants, contractors, equipment manufacturers and internal technology teams. What you'll be working on: • Electrical power distribution across critical infrastructure environments, including MV/LV switchgear, transformers, generators and UPS systems • Reviewing electrical designs, control diagrams, specifications and proposed engineering solutions • Supporting single-phase and three-phase power calculations, capacity planning and infrastructure resilience • Coordinating engineering consultants, contractors, vendors and equipment suppliers through design, delivery and commissioning • Working alongside mechanical specialists across cooling, HVAC and wider M&E infrastructure • Supporting new data-centre capacity, infrastructure expansions and technically complex office environments • Helping establish consistent engineering standards as the global technology estate continues to scale What we're looking for: You'll have a strong technical engineering foundation, ideally within electrical engineering, building services, critical infrastructure, data centres or a specialist engineering consultancy. You should understand power distribution and be comfortable reading technical drawings and challenging engineering decisions. Previous financial-services experience is not required. More important is the ability to combine genuine engineering knowledge with the organisation and communication needed to coordinate complex projects and technical stakeholders. International travel will be required, sometimes for extended periods, although there is no regular on-call requirement. For an engineer looking to move beyond individual systems and influence infrastructure at significant global scale, contact Ncounter to discuss the opportunity in confidence.
Mechanical Project Engineer Join a Global Engineering Business Delivering Complex Industrial Systems We're looking for a Project Engineer to join a specialist engineering team delivering bespoke industrial systems used across advanced manufacturing and process industries worldwide. This is an opportunity to take ownership of technically challenging projects from initial order through to installation and commissioning, working closely with customers, suppliers and internal engineering teams to ensure successful project delivery. If you enjoy solving engineering problems, coordinating multiple stakeholders and seeing projects through from concept to completion, we'd like to hear from you. What You'll Be Doing Managing bespoke engineering projects from order receipt through to final delivery and commissioning. Acting as the key point of contact for customers throughout the project lifecycle. Coordinating activities across design, procurement, manufacturing and installation teams. Managing project schedules, budgets and technical deliverables. Preparing and reviewing engineering documentation, drawings and project reports. Working with suppliers and subcontractors to ensure quality, cost and delivery targets are achieved. Managing project variations, technical queries and change requests. Supporting factory acceptance testing, site activities and commissioning where required. Monitoring project performance and identifying opportunities for continuous improvement. You'll ideally have: Experience delivering engineering projects within a manufacturing or industrial environment. A mechanical, process or systems engineering background. Strong communication and stakeholder management skills. Experience working with customers, suppliers and multidisciplinary engineering teams. An organised approach with the ability to manage multiple priorities. A hands-on attitude and willingness to take ownership of project outcomes. Experience with commissioning, installation or process systems would be particularly advantageous. What's In It For You? Bonus up to 7.5% 25 days holiday plus bank holidays Pension contribution up to 8% Life assurance Health cash plan Ongoing training and professional development Support for further qualifications Genuine opportunities for progression within a global engineering organisation Apply Whether you're currently a Project Engineer, Mechanical Engineer, Systems Engineer, Applications Engineer or Contracts Engineer looking to move into a broader project delivery role, we'd be interested in speaking with you.
Nov 22, 2026
Full time
Mechanical Project Engineer Join a Global Engineering Business Delivering Complex Industrial Systems We're looking for a Project Engineer to join a specialist engineering team delivering bespoke industrial systems used across advanced manufacturing and process industries worldwide. This is an opportunity to take ownership of technically challenging projects from initial order through to installation and commissioning, working closely with customers, suppliers and internal engineering teams to ensure successful project delivery. If you enjoy solving engineering problems, coordinating multiple stakeholders and seeing projects through from concept to completion, we'd like to hear from you. What You'll Be Doing Managing bespoke engineering projects from order receipt through to final delivery and commissioning. Acting as the key point of contact for customers throughout the project lifecycle. Coordinating activities across design, procurement, manufacturing and installation teams. Managing project schedules, budgets and technical deliverables. Preparing and reviewing engineering documentation, drawings and project reports. Working with suppliers and subcontractors to ensure quality, cost and delivery targets are achieved. Managing project variations, technical queries and change requests. Supporting factory acceptance testing, site activities and commissioning where required. Monitoring project performance and identifying opportunities for continuous improvement. You'll ideally have: Experience delivering engineering projects within a manufacturing or industrial environment. A mechanical, process or systems engineering background. Strong communication and stakeholder management skills. Experience working with customers, suppliers and multidisciplinary engineering teams. An organised approach with the ability to manage multiple priorities. A hands-on attitude and willingness to take ownership of project outcomes. Experience with commissioning, installation or process systems would be particularly advantageous. What's In It For You? Bonus up to 7.5% 25 days holiday plus bank holidays Pension contribution up to 8% Life assurance Health cash plan Ongoing training and professional development Support for further qualifications Genuine opportunities for progression within a global engineering organisation Apply Whether you're currently a Project Engineer, Mechanical Engineer, Systems Engineer, Applications Engineer or Contracts Engineer looking to move into a broader project delivery role, we'd be interested in speaking with you.
Internal Sales / Spares Coordinator - Aftermarket - Engineering Location Internal Sales / Spares Coordinator - Aftermarket - Engineering Location: Bradford, West Yorkshire Hours: 37 hours per week, flexible working hours The Opportunity We are recruiting for a well-established engineering manufacturer based in Bradford, looking to appoint a Spares Coordinator to join their aftermarket team. This is an excellent opportunity for someone with experience in spare parts, aftermarket sales, engineering internal sales, technical customer service or industrial distribution. The company designs and manufactures specialist equipment for commercial and industrial applications, with an established aftermarket operation supporting customers with replacement parts and technical enquiries. The role involves working with a broad range of mechanical and electrical components, identifying and sourcing replacement parts, preparing quotations, processing orders and providing excellent customer service. Key Responsibilities Handle customer enquiries relating to spare parts, replacement components and existing equipment. Identify suitable components using technical specifications, part numbers, serial numbers and product information. Prepare accurate quotations and proactively follow up enquiries to secure orders. Source spare parts from internal manufacturing departments and external suppliers. Process customer orders, confirm availability, lead times and coordinate deliveries. Liaise with engineering, purchasing and other internal departments to resolve technical enquiries. Develop a good understanding of the company's products and aftermarket requirements. Build and maintain strong customer relationships, ensuring enquiries are handled efficiently. Take ownership of customer requirements from initial enquiry through to completion. About You We are interested in candidates with experience in spare parts, aftermarket, technical internal sales, engineering customer service or industrial distribution. Ideally, you will have: Experience within an engineering, manufacturing, HVAC, mechanical or industrial distribution environment. Knowledge of engineered components such as pumps, valves, motors, seals, gaskets, bearings, piping, heat exchangers, heating elements, electrical controls, sensors, pressurisation equipment or associated mechanical parts. Experience preparing quotations, processing orders or sourcing spare parts and technical components. The ability to understand technical specifications, product information and part numbers. Strong communication skills and a customer-focused approach. Excellent organisational skills and attention to detail. A proactive, commercially minded attitude with the ability to follow up quotations and manage customer enquiries independently. Experience within mechanical engineering, fluid handling, HVAC, process equipment, MRO or industrial distribution would be advantageous. What's on Offer? 37-hour working week with flexible start and finish times. Core working hours of 10am-12pm and 2pm-4pm. Flexitime scheme allowing an additional day off per month through accrued hours. 25 days' annual leave plus bank holidays. Comprehensive product training and ongoing development. Long-term opportunity within an established engineering manufacturer. Apply Now If you have experience in spare parts, aftermarket sales, engineering internal sales or technical customer service and are looking for a varied role with excellent working flexibility, please apply for further information.
Nov 22, 2026
Full time
Internal Sales / Spares Coordinator - Aftermarket - Engineering Location Internal Sales / Spares Coordinator - Aftermarket - Engineering Location: Bradford, West Yorkshire Hours: 37 hours per week, flexible working hours The Opportunity We are recruiting for a well-established engineering manufacturer based in Bradford, looking to appoint a Spares Coordinator to join their aftermarket team. This is an excellent opportunity for someone with experience in spare parts, aftermarket sales, engineering internal sales, technical customer service or industrial distribution. The company designs and manufactures specialist equipment for commercial and industrial applications, with an established aftermarket operation supporting customers with replacement parts and technical enquiries. The role involves working with a broad range of mechanical and electrical components, identifying and sourcing replacement parts, preparing quotations, processing orders and providing excellent customer service. Key Responsibilities Handle customer enquiries relating to spare parts, replacement components and existing equipment. Identify suitable components using technical specifications, part numbers, serial numbers and product information. Prepare accurate quotations and proactively follow up enquiries to secure orders. Source spare parts from internal manufacturing departments and external suppliers. Process customer orders, confirm availability, lead times and coordinate deliveries. Liaise with engineering, purchasing and other internal departments to resolve technical enquiries. Develop a good understanding of the company's products and aftermarket requirements. Build and maintain strong customer relationships, ensuring enquiries are handled efficiently. Take ownership of customer requirements from initial enquiry through to completion. About You We are interested in candidates with experience in spare parts, aftermarket, technical internal sales, engineering customer service or industrial distribution. Ideally, you will have: Experience within an engineering, manufacturing, HVAC, mechanical or industrial distribution environment. Knowledge of engineered components such as pumps, valves, motors, seals, gaskets, bearings, piping, heat exchangers, heating elements, electrical controls, sensors, pressurisation equipment or associated mechanical parts. Experience preparing quotations, processing orders or sourcing spare parts and technical components. The ability to understand technical specifications, product information and part numbers. Strong communication skills and a customer-focused approach. Excellent organisational skills and attention to detail. A proactive, commercially minded attitude with the ability to follow up quotations and manage customer enquiries independently. Experience within mechanical engineering, fluid handling, HVAC, process equipment, MRO or industrial distribution would be advantageous. What's on Offer? 37-hour working week with flexible start and finish times. Core working hours of 10am-12pm and 2pm-4pm. Flexitime scheme allowing an additional day off per month through accrued hours. 25 days' annual leave plus bank holidays. Comprehensive product training and ongoing development. Long-term opportunity within an established engineering manufacturer. Apply Now If you have experience in spare parts, aftermarket sales, engineering internal sales or technical customer service and are looking for a varied role with excellent working flexibility, please apply for further information.
Production Operative Location: Andover Job Type: Full-Time Working Hours: Monday to Friday, 8:30am - 5:30pm Salary: £12.71 per hour Join a Growing Manufacturing Team We are currently recruiting for a Production Operative to join a successful and expanding manufacturing business. This is a hands-on role ideal for candidates with experience in mechanical assembly, electrical assembly, production, or manufacturing environments. Working as part of a skilled team, you will be responsible for assembling, wiring, testing, and inspecting products to ensure they meet the highest quality standards. Key Responsibilities Assemble mechanical components using technical drawings and work instructions. Install and wire electrical components, including motors, sensors, switches, and control systems. Carry out quality inspections and functional testing of completed products. Identify and report faults, defects, or inconsistencies during the assembly process. Safely use hand tools, power tools, and testing equipment. Follow company procedures and health & safety regulations at all times. Maintain a clean, organised, and safe working environment. Work closely with production, engineering, and quality teams to meet production targets. What We're Looking For Previous experience in a manufacturing, production, assembly, or engineering environment. Mechanical and/or electrical assembly experience would be advantageous. Ability to read and interpret technical drawings is beneficial but not essential. Basic understanding of electrical wiring and assembly processes. Experience using hand tools, power tools, and measuring equipment. Strong attention to detail and commitment to quality. Reliable, hardworking, and able to work effectively as part of a team. Good communication and problem-solving skills. Qualifications Engineering or manufacturing qualifications are desirable but not essential. NVQ Level 2/3 in Mechanical or Electrical Engineering would be advantageous. 18th Edition Wiring Regulations qualification is desirable but not required. Working Environment Manufacturing and workshop-based environment. Monday to Friday working pattern, 8:30am - 5:30pm. Manual handling of components may be required. PPE must be worn in designated areas. Benefits Competitive salary based on experience. Sales and productivity bonus scheme. Overtime opportunities available. Training and development programmes. Pension scheme. Supportive and friendly team environment. Long-term career progression opportunities. Apply Today If you're looking for a hands-on Production Operative role within a growing manufacturing business, we'd love to hear from you. Apply now with your CV to be considered for this exciting opportunity. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Nov 22, 2026
Full time
Production Operative Location: Andover Job Type: Full-Time Working Hours: Monday to Friday, 8:30am - 5:30pm Salary: £12.71 per hour Join a Growing Manufacturing Team We are currently recruiting for a Production Operative to join a successful and expanding manufacturing business. This is a hands-on role ideal for candidates with experience in mechanical assembly, electrical assembly, production, or manufacturing environments. Working as part of a skilled team, you will be responsible for assembling, wiring, testing, and inspecting products to ensure they meet the highest quality standards. Key Responsibilities Assemble mechanical components using technical drawings and work instructions. Install and wire electrical components, including motors, sensors, switches, and control systems. Carry out quality inspections and functional testing of completed products. Identify and report faults, defects, or inconsistencies during the assembly process. Safely use hand tools, power tools, and testing equipment. Follow company procedures and health & safety regulations at all times. Maintain a clean, organised, and safe working environment. Work closely with production, engineering, and quality teams to meet production targets. What We're Looking For Previous experience in a manufacturing, production, assembly, or engineering environment. Mechanical and/or electrical assembly experience would be advantageous. Ability to read and interpret technical drawings is beneficial but not essential. Basic understanding of electrical wiring and assembly processes. Experience using hand tools, power tools, and measuring equipment. Strong attention to detail and commitment to quality. Reliable, hardworking, and able to work effectively as part of a team. Good communication and problem-solving skills. Qualifications Engineering or manufacturing qualifications are desirable but not essential. NVQ Level 2/3 in Mechanical or Electrical Engineering would be advantageous. 18th Edition Wiring Regulations qualification is desirable but not required. Working Environment Manufacturing and workshop-based environment. Monday to Friday working pattern, 8:30am - 5:30pm. Manual handling of components may be required. PPE must be worn in designated areas. Benefits Competitive salary based on experience. Sales and productivity bonus scheme. Overtime opportunities available. Training and development programmes. Pension scheme. Supportive and friendly team environment. Long-term career progression opportunities. Apply Today If you're looking for a hands-on Production Operative role within a growing manufacturing business, we'd love to hear from you. Apply now with your CV to be considered for this exciting opportunity. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Elevation Recruitment Group
Huddersfield, Yorkshire
Elevation Recruitment Group are working with a specialist engineering and manufacturing business to recruit an experienced Project Manager with experience in Air Handling equipment or similar. This is a key role within the Projects function, responsible for the successful delivery of complex engineering projects from contract award through to completion. You will take ownership of project performance across cost, time, quality, safety and customer satisfaction, working closely with engineering, procurement, manufacturing, installation and commissioning teams. The role would suit a commercially aware Project Manager with experience delivering projects within an engineering or production environment. Key Responsibilities Take full ownership of allocated projects, ensuring delivery in line with contractual requirements, agreed budgets, timescales and quality standards. Manage all commercial aspects of projects, including cost control, forecasting, invoicing, turnover and profit performance. Develop and maintain strong relationships with customers, ensuring expectations are clearly understood and consistently met. Identify and manage technical, commercial and business risks throughout the project lifecycle. Develop appropriate contract and procurement strategies. Control project expenditure and programmes against agreed budgets and delivery milestones. Coordinate the full project lifecycle across design, procurement, fabrication, technical assembly, packing, shipping, installation and commissioning. Lead regular project review meetings and provide clear updates on project performance. Manage contract variations, change control and additional expenditure. Ensure the appropriate resources, skills and expertise are available to deliver projects successfully. Identify opportunities for cost savings, process improvements and the application of engineering best practice. Produce regular project reports covering commercial, technical, programme and delivery performance. Ensure successful project handover and close-out, including completion reporting and the capture of lessons learned. Work collaboratively across engineering, commercial and operational teams to maintain a strong culture of collective project ownership. Support the ongoing development of business processes, people and project management practices. Maintain a strong focus on health, safety and compliance throughout project delivery. About You The successful candidate will have a proven track record of delivering engineering projects successfully, with strong organisational, commercial and communication skills. Mechanical Engineering qualification ESSENTIAL - Experience within Air Handling Equipment, Containment Solutions, Powder Handling etc. Knowledge of controls/electrical engineering. Strong leadership experience. Proven experience managing projects to agreed cost, time, quality and performance criteria. Experience working within an engineering or production environment. Strong project management and subcontract management experience. Excellent verbal and written communication skills. Strong time management and organisational skills. Commercial awareness and an understanding of project financial control. Knowledge of project management tools, techniques and methodologies. What's on Offer This is an excellent opportunity to join a specialist engineering business working on technically interesting, bespoke projects, with responsibility for managing projects through the complete delivery lifecycle. If you're an experienced Project Manager looking for a role where you can take genuine ownership of complex engineering projects and make a tangible impact on delivery and commercial performance, we'd be keen to hear from you. Apply now or contact Elevation Recruitment Group for more information.
Nov 22, 2026
Full time
Elevation Recruitment Group are working with a specialist engineering and manufacturing business to recruit an experienced Project Manager with experience in Air Handling equipment or similar. This is a key role within the Projects function, responsible for the successful delivery of complex engineering projects from contract award through to completion. You will take ownership of project performance across cost, time, quality, safety and customer satisfaction, working closely with engineering, procurement, manufacturing, installation and commissioning teams. The role would suit a commercially aware Project Manager with experience delivering projects within an engineering or production environment. Key Responsibilities Take full ownership of allocated projects, ensuring delivery in line with contractual requirements, agreed budgets, timescales and quality standards. Manage all commercial aspects of projects, including cost control, forecasting, invoicing, turnover and profit performance. Develop and maintain strong relationships with customers, ensuring expectations are clearly understood and consistently met. Identify and manage technical, commercial and business risks throughout the project lifecycle. Develop appropriate contract and procurement strategies. Control project expenditure and programmes against agreed budgets and delivery milestones. Coordinate the full project lifecycle across design, procurement, fabrication, technical assembly, packing, shipping, installation and commissioning. Lead regular project review meetings and provide clear updates on project performance. Manage contract variations, change control and additional expenditure. Ensure the appropriate resources, skills and expertise are available to deliver projects successfully. Identify opportunities for cost savings, process improvements and the application of engineering best practice. Produce regular project reports covering commercial, technical, programme and delivery performance. Ensure successful project handover and close-out, including completion reporting and the capture of lessons learned. Work collaboratively across engineering, commercial and operational teams to maintain a strong culture of collective project ownership. Support the ongoing development of business processes, people and project management practices. Maintain a strong focus on health, safety and compliance throughout project delivery. About You The successful candidate will have a proven track record of delivering engineering projects successfully, with strong organisational, commercial and communication skills. Mechanical Engineering qualification ESSENTIAL - Experience within Air Handling Equipment, Containment Solutions, Powder Handling etc. Knowledge of controls/electrical engineering. Strong leadership experience. Proven experience managing projects to agreed cost, time, quality and performance criteria. Experience working within an engineering or production environment. Strong project management and subcontract management experience. Excellent verbal and written communication skills. Strong time management and organisational skills. Commercial awareness and an understanding of project financial control. Knowledge of project management tools, techniques and methodologies. What's on Offer This is an excellent opportunity to join a specialist engineering business working on technically interesting, bespoke projects, with responsibility for managing projects through the complete delivery lifecycle. If you're an experienced Project Manager looking for a role where you can take genuine ownership of complex engineering projects and make a tangible impact on delivery and commercial performance, we'd be keen to hear from you. Apply now or contact Elevation Recruitment Group for more information.
Lead the complete engineering, maintenance and facilities strategy Proven leadership experience managing engineering and maintenance teams IOSH or NEBOSH qualification (essential) Our client is a respected food manufacturing business operating a significant production facility at Park Royal. They are seeking an experienced Facilities Manager to take full ownership of the engineering, maintenance and facilities function across the site. Reporting directly to the Director and joining the senior leadership team, you will be responsible for ensuring the site remains safe, compliant, efficient and capable of supporting continued business growth. This is a permanent role Lead the complete engineering, maintenance and facilities strategy for a complex food manufacturing site, including cold chain management and production equipment A senior leadership position and direct reports Manage a critical function in a growing, regulated food business with real scope to shape the future structure of your team Preferred Requirements Proven leadership experience managing engineering and maintenance teams within food manufacturing, FMCG or another regulated production environment Strong knowledge of health and safety legislation, food hygiene standards, HACCP and compliance requirements in a production setting Demonstrated ability to design and deliver planned preventative maintenance programmes whilst managing reactive maintenance and critical breakdowns Commercial acumen including budget management, capital expenditure planning, contractor management and supplier negotiations Excellent stakeholder management skills with the ability to work effectively across production, hygiene, dispatch and senior leadership teams Preferred Qualifications IOSH or NEBOSH qualification (essential) IWFM qualification or equivalent facilities management accreditation (advantageous) Mechanical, electrical or multi-skilled engineering background with experience of industrial refrigeration systems, cold stores and production equipment
Nov 22, 2026
Full time
Lead the complete engineering, maintenance and facilities strategy Proven leadership experience managing engineering and maintenance teams IOSH or NEBOSH qualification (essential) Our client is a respected food manufacturing business operating a significant production facility at Park Royal. They are seeking an experienced Facilities Manager to take full ownership of the engineering, maintenance and facilities function across the site. Reporting directly to the Director and joining the senior leadership team, you will be responsible for ensuring the site remains safe, compliant, efficient and capable of supporting continued business growth. This is a permanent role Lead the complete engineering, maintenance and facilities strategy for a complex food manufacturing site, including cold chain management and production equipment A senior leadership position and direct reports Manage a critical function in a growing, regulated food business with real scope to shape the future structure of your team Preferred Requirements Proven leadership experience managing engineering and maintenance teams within food manufacturing, FMCG or another regulated production environment Strong knowledge of health and safety legislation, food hygiene standards, HACCP and compliance requirements in a production setting Demonstrated ability to design and deliver planned preventative maintenance programmes whilst managing reactive maintenance and critical breakdowns Commercial acumen including budget management, capital expenditure planning, contractor management and supplier negotiations Excellent stakeholder management skills with the ability to work effectively across production, hygiene, dispatch and senior leadership teams Preferred Qualifications IOSH or NEBOSH qualification (essential) IWFM qualification or equivalent facilities management accreditation (advantageous) Mechanical, electrical or multi-skilled engineering background with experience of industrial refrigeration systems, cold stores and production equipment
At ORONA, we are global leaders in the design, manufacture, installation, maintenance and modernisation of lifts, escalators, moving ramps and walkways. Operating in over 100 countries, with 330,000 lifts worldwide using our technology and 2 manufacturing plants, we are proud to be Number 1 in Europe for complete lift production capacity. The Role We have an opportunity for candidates with Mechanical/Electrical Engineering backgrounds to join our growing organisation. We are looking for Mechanical or Electrical Engineers for our Edinburgh, who are looking for the first or next step in their career, Orona's Transferable Skills Programme will help you to gain the knowledge and experience to work as an independent Lift Engineer. You will be trained by our experienced Lift Engineers and Technical Department to learn and understand the company and requirements of our industry. Depending on your learning progress, you will then be enrolled for the NVQ level 3 course within either the Installation or Maintenance of Lifts. What We're Looking For • Mechanical or Electrical background demonstrated either through Education or through recent work experience • The ability to follow instructions and ensuring safety guidelines are followed at all time • Demonstrate a willingness to develop and learn new skills. • Clean UK driving licence. • Ideally possess one of the following; - Level 2 Foundation Course in Mechanical/Electrical Engineering, - Level 2 Performing Engineering Operations - BTEC Level 3 Diploma in Electrical, Electronic, Mechanical Engineering Why Join ORONA? We offer more than just a job - we offer long-term career development within a stable and growing company. What We Offer: Attractive Salary: Competitive pay that reflects your skills and experience Generous Holiday Allowance : Enjoy 25 days of annual leave, increasing to 30 with service, and 8 public holidays Secure Future: Benefit from a pension scheme with increasing company contributions as you grow with us Peace of Mind : Life Inssurance to support you and your loved ones Health & Wellbeing: Medical Cash Back Plan to help with health costs, plus access to 24/7 GP services Family-Friendly Benefits : Enhanced leave for family-related events and emergencies Support When You Need It: Employee Assistance Programme offering confidential support for personal or work-related challenges Eye Care : Eyecare vouchers to help keep your vision sharp Recognition for Longevity : Long Service Awards to celebrate your milestones with us Referral Rewards : Earn a Recruitment Referral Fee by helping us find top talent Continuous Growth: Ongoing Training & Development opportunities to support your career journey Join ORONA and be part of a company moving the world safely and efficiently every day.
Nov 22, 2026
Full time
At ORONA, we are global leaders in the design, manufacture, installation, maintenance and modernisation of lifts, escalators, moving ramps and walkways. Operating in over 100 countries, with 330,000 lifts worldwide using our technology and 2 manufacturing plants, we are proud to be Number 1 in Europe for complete lift production capacity. The Role We have an opportunity for candidates with Mechanical/Electrical Engineering backgrounds to join our growing organisation. We are looking for Mechanical or Electrical Engineers for our Edinburgh, who are looking for the first or next step in their career, Orona's Transferable Skills Programme will help you to gain the knowledge and experience to work as an independent Lift Engineer. You will be trained by our experienced Lift Engineers and Technical Department to learn and understand the company and requirements of our industry. Depending on your learning progress, you will then be enrolled for the NVQ level 3 course within either the Installation or Maintenance of Lifts. What We're Looking For • Mechanical or Electrical background demonstrated either through Education or through recent work experience • The ability to follow instructions and ensuring safety guidelines are followed at all time • Demonstrate a willingness to develop and learn new skills. • Clean UK driving licence. • Ideally possess one of the following; - Level 2 Foundation Course in Mechanical/Electrical Engineering, - Level 2 Performing Engineering Operations - BTEC Level 3 Diploma in Electrical, Electronic, Mechanical Engineering Why Join ORONA? We offer more than just a job - we offer long-term career development within a stable and growing company. What We Offer: Attractive Salary: Competitive pay that reflects your skills and experience Generous Holiday Allowance : Enjoy 25 days of annual leave, increasing to 30 with service, and 8 public holidays Secure Future: Benefit from a pension scheme with increasing company contributions as you grow with us Peace of Mind : Life Inssurance to support you and your loved ones Health & Wellbeing: Medical Cash Back Plan to help with health costs, plus access to 24/7 GP services Family-Friendly Benefits : Enhanced leave for family-related events and emergencies Support When You Need It: Employee Assistance Programme offering confidential support for personal or work-related challenges Eye Care : Eyecare vouchers to help keep your vision sharp Recognition for Longevity : Long Service Awards to celebrate your milestones with us Referral Rewards : Earn a Recruitment Referral Fee by helping us find top talent Continuous Growth: Ongoing Training & Development opportunities to support your career journey Join ORONA and be part of a company moving the world safely and efficiently every day.
Chief Systems Engineer / Technical Lead - Advanced Missile Systems Location: Vauxhall, London (4-5 days a week onsite) Contract: IR35 status to be confirmed Rate: Competitive, dependent on experience Availability: 1 - 2 weeks notice An exciting opportunity has arisen for an experienced Chief Systems Engineer / Technical Lead to support the development of a new missile system within an ambitious, early-stage defence engineering business. This is a senior, hands-on technical leadership position, offering the opportunity to take ownership of the engineering development of a complex missile system, progressing from early concept through detailed design, prototype development and demonstration. The successful candidate will provide technical direction across a multidisciplinary engineering environment, establishing the systems engineering approach, driving architecture and design decisions and ensuring the successful integration and verification of the developing system. Key Responsibilities Take technical ownership of the engineering development of a new missile system from concept through to prototype and demonstration. Develop and maintain the system architecture, requirements and technical baseline. Translate high-level capability objectives into clear, achievable engineering requirements. Lead multidisciplinary engineering activities across mechanical, electrical, electronic and software disciplines. Drive technical design reviews, engineering trade-offs and resolution of complex technical challenges. Establish appropriate systems engineering processes, technical documentation and engineering assurance. Oversee system integration, verification, validation and prototype testing. Identify and manage technical risks, dependencies and design maturity. Provide practical technical leadership to a small engineering team and specialist external suppliers. Report on engineering progress, technical decisions and emerging risks. Help establish the technical foundations for subsequent stages of missile development. Essential Experience Significant experience in Systems Engineering and technical leadership within defence, aerospace or another complex engineering environment. Demonstrable involvement in taking complex products or systems from early concept through design, development and prototype or demonstrator stages. Strong understanding of systems architecture, requirements engineering, system integration and verification and validation. Background in missile systems, supersonic or hypersonic air systems, guided weapons, complex weapons or other advanced defence technologies. Experience leading multidisciplinary engineering teams and coordinating technical activities across different engineering disciplines. Ability to make sound engineering decisions in environments where requirements, technologies and design maturity are evolving. A practical, hands-on engineering approach, with the ability to take direct responsibility for technical outcomes rather than relying solely on programme management or governance. Desirable Experience Experience in research and development environments and technology maturation across different Technology Readiness Levels. Experience working within an early-stage technology business or establishing engineering capability from the ground up. Familiarity with Model-Based Systems Engineering and associated tools. Direct experience of prototype integration, testing and technical demonstration. Chartered Engineer status or an advanced engineering qualification. The Opportunity This contract offers the opportunity to play a pivotal role in the development of a new missile system, working closely with senior stakeholders and engineering specialists in a technically challenging environment. The emphasis is on genuine engineering ownership, practical problem-solving and delivering a complex missile system from early-stage development towards a working demonstrator.
Nov 22, 2026
Full time
Chief Systems Engineer / Technical Lead - Advanced Missile Systems Location: Vauxhall, London (4-5 days a week onsite) Contract: IR35 status to be confirmed Rate: Competitive, dependent on experience Availability: 1 - 2 weeks notice An exciting opportunity has arisen for an experienced Chief Systems Engineer / Technical Lead to support the development of a new missile system within an ambitious, early-stage defence engineering business. This is a senior, hands-on technical leadership position, offering the opportunity to take ownership of the engineering development of a complex missile system, progressing from early concept through detailed design, prototype development and demonstration. The successful candidate will provide technical direction across a multidisciplinary engineering environment, establishing the systems engineering approach, driving architecture and design decisions and ensuring the successful integration and verification of the developing system. Key Responsibilities Take technical ownership of the engineering development of a new missile system from concept through to prototype and demonstration. Develop and maintain the system architecture, requirements and technical baseline. Translate high-level capability objectives into clear, achievable engineering requirements. Lead multidisciplinary engineering activities across mechanical, electrical, electronic and software disciplines. Drive technical design reviews, engineering trade-offs and resolution of complex technical challenges. Establish appropriate systems engineering processes, technical documentation and engineering assurance. Oversee system integration, verification, validation and prototype testing. Identify and manage technical risks, dependencies and design maturity. Provide practical technical leadership to a small engineering team and specialist external suppliers. Report on engineering progress, technical decisions and emerging risks. Help establish the technical foundations for subsequent stages of missile development. Essential Experience Significant experience in Systems Engineering and technical leadership within defence, aerospace or another complex engineering environment. Demonstrable involvement in taking complex products or systems from early concept through design, development and prototype or demonstrator stages. Strong understanding of systems architecture, requirements engineering, system integration and verification and validation. Background in missile systems, supersonic or hypersonic air systems, guided weapons, complex weapons or other advanced defence technologies. Experience leading multidisciplinary engineering teams and coordinating technical activities across different engineering disciplines. Ability to make sound engineering decisions in environments where requirements, technologies and design maturity are evolving. A practical, hands-on engineering approach, with the ability to take direct responsibility for technical outcomes rather than relying solely on programme management or governance. Desirable Experience Experience in research and development environments and technology maturation across different Technology Readiness Levels. Experience working within an early-stage technology business or establishing engineering capability from the ground up. Familiarity with Model-Based Systems Engineering and associated tools. Direct experience of prototype integration, testing and technical demonstration. Chartered Engineer status or an advanced engineering qualification. The Opportunity This contract offers the opportunity to play a pivotal role in the development of a new missile system, working closely with senior stakeholders and engineering specialists in a technically challenging environment. The emphasis is on genuine engineering ownership, practical problem-solving and delivering a complex missile system from early-stage development towards a working demonstrator.
We are looking for an experienced Senior Hardware Engineer to develop advanced inertial sensing, navigation and stabilisation products for defence, aerospace and industrial applications. You'll work on technologies including IMUs and navigation systems, used across airborne, land and marine platforms where accuracy and reliability are critical. This is a hands-on role covering product architecture, electronic and PCB design, prototype bring-up, multi-board integration and verification. Working with Systems, FPGA/Firmware, Mechanical and Manufacturing teams, you'll have the opportunity to influence new product designs and take technical ownership from concept through to production. Join a company that's reintroducing itself to the aviation community we've helped advance for more than a century. At Honeywell Aerospace (NASDAQ: HONA), we're launching as an independent, publicly traded aerospace and defense company built on a legacy of operational excellence and mission-focused execution. Our new brand identity pairs that heritage with real momentum, as we build technology that helps pilots navigate with confidence, aircraft operate more efficiently, and operators stay ahead of change. With our systems on board 90% of the world's aircraft, your work here has reach that's rare to find anywhere else. Focusing on our customers, investing in innovation, and building a culture of accountability and performance is how we're shaping what comes next. Every horizon. Every mission. Every day. Honeywell Aerospace products and services are found on aircraft across commercial aviation, defense and space - from engines and cockpit electronics to cabin systems, mechanical components and connectivity solutions. Our technology helps operators fly more safely, reduce fuel consumption, improve on-time performance and deliver a better experience for the people on board. As aviation continues to evolve, we're also developing systems to support autonomous and supersonic platforms, bringing the same focus on safety and efficiency to the next era of flight. With approximately 36,000 employees worldwide and net sales of $17.4B in 2025, Honeywell Aerospace is one of the largest dedicated aerospace companies in the world. Control Systems develops the thermal and motion control systems that help aircraft take off, land safely and protect the people on board. With more than 10 million passengers per day flying on aircraft equipped with our products and more than 75% of commercial flights beginning with our engine start systems, Control Systems reaches farther across the aviation industry than most people realize. Key Responsibilities • Define hardware requirements and hardware architectures from system-level requirements. • Design analog and digital electronics, including component selection, schematics and multilayer PCBs. • Design PCBA using Altium Designer and/or Siemens Xpedition design tools. • Define interfaces and oversee the integration of multiple boards and modules into complete products. • Lead prototype bring-up, debugging, verification and qualification activities. • Apply good design practice for EMI/EMC, signal and power integrity, reliability and manufacturability. • Provide technical leadership through design reviews, problem solving and multidisciplinary collaboration. Key Skills & Experience • 5+ years' industry experience in electronic hardware design and development. • Strong analog and digital board-level design experience. • Experience in product, hardware or system architecture, translating requirements into practical designs. • Strong PCB development experience using Altium Designer and/or Siemens Xpedition • Experience integrating and debugging multi-board electronic systems, ideally within defence, aerospace or other high-reliability applications. Beneficial Experience The following would be advantageous, but are not essential: • Knowledge of inertial or other sensor technologies, such as IMUs, MEMS or fibre-optic sensors. • Experience working within DO-254 or similar safety-critical/regulated hardware development environments. • Familiarity with FPGAs, microcontrollers, ADCs, DACs and mixed-signal electronics. • Experience with SPICE/OrCAD or equivalent simulation tools. • Experience of EMC qualification, environmental testing, DFA/DFM/DFT and PCBA manufacturing processes. We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Join a team recognized for leadership, innovation, and diversity
Nov 22, 2026
Full time
We are looking for an experienced Senior Hardware Engineer to develop advanced inertial sensing, navigation and stabilisation products for defence, aerospace and industrial applications. You'll work on technologies including IMUs and navigation systems, used across airborne, land and marine platforms where accuracy and reliability are critical. This is a hands-on role covering product architecture, electronic and PCB design, prototype bring-up, multi-board integration and verification. Working with Systems, FPGA/Firmware, Mechanical and Manufacturing teams, you'll have the opportunity to influence new product designs and take technical ownership from concept through to production. Join a company that's reintroducing itself to the aviation community we've helped advance for more than a century. At Honeywell Aerospace (NASDAQ: HONA), we're launching as an independent, publicly traded aerospace and defense company built on a legacy of operational excellence and mission-focused execution. Our new brand identity pairs that heritage with real momentum, as we build technology that helps pilots navigate with confidence, aircraft operate more efficiently, and operators stay ahead of change. With our systems on board 90% of the world's aircraft, your work here has reach that's rare to find anywhere else. Focusing on our customers, investing in innovation, and building a culture of accountability and performance is how we're shaping what comes next. Every horizon. Every mission. Every day. Honeywell Aerospace products and services are found on aircraft across commercial aviation, defense and space - from engines and cockpit electronics to cabin systems, mechanical components and connectivity solutions. Our technology helps operators fly more safely, reduce fuel consumption, improve on-time performance and deliver a better experience for the people on board. As aviation continues to evolve, we're also developing systems to support autonomous and supersonic platforms, bringing the same focus on safety and efficiency to the next era of flight. With approximately 36,000 employees worldwide and net sales of $17.4B in 2025, Honeywell Aerospace is one of the largest dedicated aerospace companies in the world. Control Systems develops the thermal and motion control systems that help aircraft take off, land safely and protect the people on board. With more than 10 million passengers per day flying on aircraft equipped with our products and more than 75% of commercial flights beginning with our engine start systems, Control Systems reaches farther across the aviation industry than most people realize. Key Responsibilities • Define hardware requirements and hardware architectures from system-level requirements. • Design analog and digital electronics, including component selection, schematics and multilayer PCBs. • Design PCBA using Altium Designer and/or Siemens Xpedition design tools. • Define interfaces and oversee the integration of multiple boards and modules into complete products. • Lead prototype bring-up, debugging, verification and qualification activities. • Apply good design practice for EMI/EMC, signal and power integrity, reliability and manufacturability. • Provide technical leadership through design reviews, problem solving and multidisciplinary collaboration. Key Skills & Experience • 5+ years' industry experience in electronic hardware design and development. • Strong analog and digital board-level design experience. • Experience in product, hardware or system architecture, translating requirements into practical designs. • Strong PCB development experience using Altium Designer and/or Siemens Xpedition • Experience integrating and debugging multi-board electronic systems, ideally within defence, aerospace or other high-reliability applications. Beneficial Experience The following would be advantageous, but are not essential: • Knowledge of inertial or other sensor technologies, such as IMUs, MEMS or fibre-optic sensors. • Experience working within DO-254 or similar safety-critical/regulated hardware development environments. • Familiarity with FPGAs, microcontrollers, ADCs, DACs and mixed-signal electronics. • Experience with SPICE/OrCAD or equivalent simulation tools. • Experience of EMC qualification, environmental testing, DFA/DFM/DFT and PCBA manufacturing processes. We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Join a team recognized for leadership, innovation, and diversity