Mechanical Fitter & Assembler Rate: 16.00/hr ( 32,448 pa) + ( 24.00/hr) Location: St Neots, Cambridgeshire (commutable - own transport essential) Hours: 39 hours/week, Monday to Friday Type: Full-Time, Permanent Overtime: Paid at 1.5x hourly rate (Mon-Fri & Sat AM) About the Role Long-established and respected engineering manufacturing company is seeking a Multi-skilled Mechanical Fitter & Assembler to join their skilled team. You'll be assembling and fitting high-quality stainless steel equipment used in the food processing industry, both in-house and occasionally on client sites. Key Responsibilities Assemble and fit mechanical components to a high standard Work from engineering drawings with precision Build and fit: Mechanical motors (strip/rebuild), Air pneumatics, Bearing housings, Hydraulic systems Use a variety of hand tools and mechanical equipment Maintain high standards of housekeeping and safety Follow company procedures and health & safety protocols Occasionally work on-site as required Requirements Proven experience in mechanical fitting and assembly Strong understanding of engineering drawings Skilled in pneumatics, hydraulics, and special-purpose machinery Proficient with hand tools and mechanical equipment City & Guilds in Engineering or equivalent experience preferred Must supply own basic hand tools (specialist tools provided) Working Hours Monday: 7:30am - 4:00pm Tuesday: 7:30am - 4:30pm Wednesday-Thursday: 7:30am - 5:00pm Friday: 7:30am - 12:00pm (overtime available) Benefits Annual Bonus (based on company performance) 20 Days Holiday + Bank Holidays (rising to 26 with service) Life Assurance & Sick Pay Scheme Workwear Provided Subsidised Snacks & Staff Meals/Events Pension Scheme Apply Now If you're a skilled Mechanical Fitter & Assembler looking for a stable role in a supportive and growing company, we'd like to hear from you! HRGO Recruitment provides both permanent and temporary job opportunities across the UK. Applicants must have the right to work in the UK. HRGO is committed to equal opportunities for all.
May 11, 2026
Full time
Mechanical Fitter & Assembler Rate: 16.00/hr ( 32,448 pa) + ( 24.00/hr) Location: St Neots, Cambridgeshire (commutable - own transport essential) Hours: 39 hours/week, Monday to Friday Type: Full-Time, Permanent Overtime: Paid at 1.5x hourly rate (Mon-Fri & Sat AM) About the Role Long-established and respected engineering manufacturing company is seeking a Multi-skilled Mechanical Fitter & Assembler to join their skilled team. You'll be assembling and fitting high-quality stainless steel equipment used in the food processing industry, both in-house and occasionally on client sites. Key Responsibilities Assemble and fit mechanical components to a high standard Work from engineering drawings with precision Build and fit: Mechanical motors (strip/rebuild), Air pneumatics, Bearing housings, Hydraulic systems Use a variety of hand tools and mechanical equipment Maintain high standards of housekeeping and safety Follow company procedures and health & safety protocols Occasionally work on-site as required Requirements Proven experience in mechanical fitting and assembly Strong understanding of engineering drawings Skilled in pneumatics, hydraulics, and special-purpose machinery Proficient with hand tools and mechanical equipment City & Guilds in Engineering or equivalent experience preferred Must supply own basic hand tools (specialist tools provided) Working Hours Monday: 7:30am - 4:00pm Tuesday: 7:30am - 4:30pm Wednesday-Thursday: 7:30am - 5:00pm Friday: 7:30am - 12:00pm (overtime available) Benefits Annual Bonus (based on company performance) 20 Days Holiday + Bank Holidays (rising to 26 with service) Life Assurance & Sick Pay Scheme Workwear Provided Subsidised Snacks & Staff Meals/Events Pension Scheme Apply Now If you're a skilled Mechanical Fitter & Assembler looking for a stable role in a supportive and growing company, we'd like to hear from you! HRGO Recruitment provides both permanent and temporary job opportunities across the UK. Applicants must have the right to work in the UK. HRGO is committed to equal opportunities for all.
Are you a skilled Mechanical Fitter looking for a role that actually respects your downtime? At Caterpillar Larne, we've structured our week so you can get your 37.5 hours done in just four days. That's a three-day weekend, every single week, while working for one of the world's most iconic engineering brands. Job title: Mechanical fitter Location: Larne Job type: Temporary Salary: £16.75 - £33.50 From hospital backup systems to global data centres, you'll be the one ensuring the world's most critical power units are built to perfection. Why fitters are moving to Caterpillar Larne: The 4-day week: Work Monday to Thursday and enjoy a guaranteed 3-day weekend. Competitive earnings: Earn a solid base rate with shift premiums for nights (£22.33/hr) and high-value overtime reaching £33.50/hr . Modern facility: Work in a clean, safe, and professional environment with on-site canteen and free parking. Uniform and gear: We provide full PPE and uniform from day one, so you're ready to hit the ground running. Stability and growth: Ongoing assignments with full induction and professional training to help you master the Caterpillar way. Your role on the floor Working as part of a precision assembly team, you will: Build and integrate: Assemble, fit, and adjust generator sets (Gensets), fuel systems, and radiators. Interpret: Read and follow complex engineering prints and sketches to plan your build sequence. Precision tools: Use a variety of power and hand tools to ensure every component meets our "Gold Standard" quality. Improve: Collaborate with the team on 5S and lean manufacturing initiatives to keep our facility world-class. What you'll need Qualifications: A formal Apprenticeship or NVQ Level 3 in a relevant mechanical field. Experience: Proven experience in assembly or fitting (ideally within a lean manufacturing environment). Detail: Great attention to detail and a commitment to high safety and quality standards. Mindset: Comfort working from heights or in enclosed spaces when the build requires it. Shift and pay breakdown Day shift: £16.75 per hour Night shift: £22.33 per hour Overtime (First 10 hours): £25.13 per hour Overtime (After 10 hours): £33.50 per hour Ready for a better work-life balance? Applying is easy. Don't stay stuck in a 5-day grind, join the team that builds the power for tomorrow. Click apply today, and our Randstad on-site team will reach out for a friendly chat and to get your interview started. Apply now and power your career at Caterpillar Larne.
May 11, 2026
Seasonal
Are you a skilled Mechanical Fitter looking for a role that actually respects your downtime? At Caterpillar Larne, we've structured our week so you can get your 37.5 hours done in just four days. That's a three-day weekend, every single week, while working for one of the world's most iconic engineering brands. Job title: Mechanical fitter Location: Larne Job type: Temporary Salary: £16.75 - £33.50 From hospital backup systems to global data centres, you'll be the one ensuring the world's most critical power units are built to perfection. Why fitters are moving to Caterpillar Larne: The 4-day week: Work Monday to Thursday and enjoy a guaranteed 3-day weekend. Competitive earnings: Earn a solid base rate with shift premiums for nights (£22.33/hr) and high-value overtime reaching £33.50/hr . Modern facility: Work in a clean, safe, and professional environment with on-site canteen and free parking. Uniform and gear: We provide full PPE and uniform from day one, so you're ready to hit the ground running. Stability and growth: Ongoing assignments with full induction and professional training to help you master the Caterpillar way. Your role on the floor Working as part of a precision assembly team, you will: Build and integrate: Assemble, fit, and adjust generator sets (Gensets), fuel systems, and radiators. Interpret: Read and follow complex engineering prints and sketches to plan your build sequence. Precision tools: Use a variety of power and hand tools to ensure every component meets our "Gold Standard" quality. Improve: Collaborate with the team on 5S and lean manufacturing initiatives to keep our facility world-class. What you'll need Qualifications: A formal Apprenticeship or NVQ Level 3 in a relevant mechanical field. Experience: Proven experience in assembly or fitting (ideally within a lean manufacturing environment). Detail: Great attention to detail and a commitment to high safety and quality standards. Mindset: Comfort working from heights or in enclosed spaces when the build requires it. Shift and pay breakdown Day shift: £16.75 per hour Night shift: £22.33 per hour Overtime (First 10 hours): £25.13 per hour Overtime (After 10 hours): £33.50 per hour Ready for a better work-life balance? Applying is easy. Don't stay stuck in a 5-day grind, join the team that builds the power for tomorrow. Click apply today, and our Randstad on-site team will reach out for a friendly chat and to get your interview started. Apply now and power your career at Caterpillar Larne.
Job Overview We are seeking a skilled Mobile Plant Fitter to join our dynamic team. Our ideal candidate would live around Reading (Camberley, Basingstoke, etc) kind of area, so they have good access to the motorway networks to visit drivers across the areas that we cover. Their schedule would be predetermined (as much as possible bearing in mind the reactiveness of our industry) The ideal candidate will possess a strong understanding of mechanical systems and demonstrate proficiency in fitting and assembly tasks. This role is crucial in ensuring that all components are accurately assembled to meet quality standards and specifications. Responsibilities Assemble and fit components using a variety of tools and equipment, ensuring precision and quality in every task. Conduct regular inspections of assembled parts to ensure compliance with safety and quality standards. Collaborate with other team members to troubleshoot issues and implement solutions effectively. Maintain a clean and organised workspace, adhering to health and safety regulations at all times. Document work performed, including any modifications or repairs made during the fitting process. Requirements Proven experience as a Fitter - (Experience specifically Road Sweepers preferred) Strong understanding of mechanical systems, including hydraulics and pneumatics. Proficiency in using hand tools, power tools, and measuring instruments. Ability to read and interpret technical drawings and schematics accurately. Excellent attention to detail with a commitment to producing high-quality work. Strong problem-solving skills and the ability to work effectively both independently and as part of a team. NVQ level 3 plant Maintenance or Equivalent Duties Repairs and checks on Road Sweepers Checks & repairs on Chassis. You will also be trained to work on Bitumen sprayers _Standard hours: 55 hours per week, plus 8 hours every other weekend_ _Overtime available: Overtime available at a higher rate of pay including weekends_ _Holiday: 20 days + 8 days bank Holiday_ We welcome applications from candidates who are eager to contribute their skills in a fast-paced environment while furthering their professional development within our organisation. Job Types: Full-time, Permanent Pay: £42,000.00-£45,000.00 per year Experience: Road Sweeping repairs: 1 year (preferred) Licence/Certification: NVQ Level 3 in plant Maintenance or Equivalent (required) Driving Licence (required) Work Location: In person
May 11, 2026
Full time
Job Overview We are seeking a skilled Mobile Plant Fitter to join our dynamic team. Our ideal candidate would live around Reading (Camberley, Basingstoke, etc) kind of area, so they have good access to the motorway networks to visit drivers across the areas that we cover. Their schedule would be predetermined (as much as possible bearing in mind the reactiveness of our industry) The ideal candidate will possess a strong understanding of mechanical systems and demonstrate proficiency in fitting and assembly tasks. This role is crucial in ensuring that all components are accurately assembled to meet quality standards and specifications. Responsibilities Assemble and fit components using a variety of tools and equipment, ensuring precision and quality in every task. Conduct regular inspections of assembled parts to ensure compliance with safety and quality standards. Collaborate with other team members to troubleshoot issues and implement solutions effectively. Maintain a clean and organised workspace, adhering to health and safety regulations at all times. Document work performed, including any modifications or repairs made during the fitting process. Requirements Proven experience as a Fitter - (Experience specifically Road Sweepers preferred) Strong understanding of mechanical systems, including hydraulics and pneumatics. Proficiency in using hand tools, power tools, and measuring instruments. Ability to read and interpret technical drawings and schematics accurately. Excellent attention to detail with a commitment to producing high-quality work. Strong problem-solving skills and the ability to work effectively both independently and as part of a team. NVQ level 3 plant Maintenance or Equivalent Duties Repairs and checks on Road Sweepers Checks & repairs on Chassis. You will also be trained to work on Bitumen sprayers _Standard hours: 55 hours per week, plus 8 hours every other weekend_ _Overtime available: Overtime available at a higher rate of pay including weekends_ _Holiday: 20 days + 8 days bank Holiday_ We welcome applications from candidates who are eager to contribute their skills in a fast-paced environment while furthering their professional development within our organisation. Job Types: Full-time, Permanent Pay: £42,000.00-£45,000.00 per year Experience: Road Sweeping repairs: 1 year (preferred) Licence/Certification: NVQ Level 3 in plant Maintenance or Equivalent (required) Driving Licence (required) Work Location: In person
About the Role We are seeking two experienced and dependable Mobile Crane Fitters to join our workshop team - one based in the Cardiff area and one in the Carmarthen area You will be responsible for the inspection, servicing, maintenance, and repair of mobile cranes and lifting equipment across various customer sites and our depots. The role is field based and requires a strong mechanical aptitude, good diagnostic skills, and a commitment to safe working practices. This is an excellent opportunity for a technician with mobile crane, plant, HGV or heavy machinery experience who wants a varied and rewarding role within a growing business. Key Responsibilities Carry out routine servicing, inspections and maintenance on mobile cranes & HGV fleet. Diagnose mechanical, hydraulic and electrical faults on site and in the workshop. Complete breakdown repairs and respond to urgent call outs when required. Ensure all work is completed safely and in line with company and industry standards. Maintain accurate service records, job sheets and compliance documentation. Provide excellent customer service while working on client sites. Support the workshop team with workshop repairs when not field based. Skills & Experience Required Proven experience as a Crane Fitter, Plant Fitter, HGV Technician, or Heavy Equipment Engineer. Strong understanding of hydraulics, electrics and mechanical systems. Ability to read technical manuals, diagrams and schematics. Full UK driving licence (HGV Class 1 or 2 beneficial but not essential). LOLER/PUWER awareness or experience working in a safety critical environment. Ability to work independently, manage your own workload and solve problems on the job. Strong commitment to safe working practices. What We Offer Competitive salary (DOE) Overtime opportunities Company van and fuel card PPE provided Ongoing training and development 28 days holiday (including bank holidays) Company pension scheme Job Type: Full-time Pay: £37,500.00-£60,000.00 per year Benefits: Company pension Free parking On-site parking Application question(s): Located in Carmarthen, Cardiff or surrounding areas? Work Location: In person
May 11, 2026
Full time
About the Role We are seeking two experienced and dependable Mobile Crane Fitters to join our workshop team - one based in the Cardiff area and one in the Carmarthen area You will be responsible for the inspection, servicing, maintenance, and repair of mobile cranes and lifting equipment across various customer sites and our depots. The role is field based and requires a strong mechanical aptitude, good diagnostic skills, and a commitment to safe working practices. This is an excellent opportunity for a technician with mobile crane, plant, HGV or heavy machinery experience who wants a varied and rewarding role within a growing business. Key Responsibilities Carry out routine servicing, inspections and maintenance on mobile cranes & HGV fleet. Diagnose mechanical, hydraulic and electrical faults on site and in the workshop. Complete breakdown repairs and respond to urgent call outs when required. Ensure all work is completed safely and in line with company and industry standards. Maintain accurate service records, job sheets and compliance documentation. Provide excellent customer service while working on client sites. Support the workshop team with workshop repairs when not field based. Skills & Experience Required Proven experience as a Crane Fitter, Plant Fitter, HGV Technician, or Heavy Equipment Engineer. Strong understanding of hydraulics, electrics and mechanical systems. Ability to read technical manuals, diagrams and schematics. Full UK driving licence (HGV Class 1 or 2 beneficial but not essential). LOLER/PUWER awareness or experience working in a safety critical environment. Ability to work independently, manage your own workload and solve problems on the job. Strong commitment to safe working practices. What We Offer Competitive salary (DOE) Overtime opportunities Company van and fuel card PPE provided Ongoing training and development 28 days holiday (including bank holidays) Company pension scheme Job Type: Full-time Pay: £37,500.00-£60,000.00 per year Benefits: Company pension Free parking On-site parking Application question(s): Located in Carmarthen, Cardiff or surrounding areas? Work Location: In person
Ernest Gordon Recruitment Limited
Ripley, Derbyshire
Electrical Maintenance Engineer (3 Shift Pattern) £53,000 + Training + Bonus + Overtime + 34 Days Holiday + Company Benefits Ripley Are you a Maintenance Engineer from an electrical background looking to join a globally recognised business offering a performance-based bonus and the opportunity to work on state-of-the-art equipment and machinery? Founded nearly 100 years ago, this global business specializes in the manufacturing of a wife range of flooring solutions. Priding themselves on their international success, they have 15 sites across 26 countries, they have clear goals to be the all encompassed flooring solution across the globe. In this hands on role, you will be working on a 3-shift pattern, working within a small team of Engineers. The role will consist of both planned and reactive maintenance, along with fault finding on a range of equipment including hydraulics and pneumatics. The teams clear goals are too shift from reactive maintenance, to proactive maintenance, increasing the overall efficiencies of the shopfloor. This role would suit a Maintenance Engineer from an electrical background, looking for a role within a globally recognised business, offering a generous bonus scheme and the chance to work on some state of the art equipment? The Role: Planned and reactive maintenance on a variety of mechanical machinery Working on hydraulics, pumps and pneumatics 3 shift patten - 06:00-14:00 / 14:00 - 22:00 / 22:00 - 06:00 Monday - Friday, with weekend overtime available The Person: Maintenance Engineer Electrical background Mechanical Maintenance Apprentice Trained Reference Number: BBBH24919a Maintenance, Engineer, Mechanical, Fitter, Equipment, Reactive, Planned, Shift, Flooring, Manufacture, Manufacturing, Ripley, Nottingham If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
May 11, 2026
Full time
Electrical Maintenance Engineer (3 Shift Pattern) £53,000 + Training + Bonus + Overtime + 34 Days Holiday + Company Benefits Ripley Are you a Maintenance Engineer from an electrical background looking to join a globally recognised business offering a performance-based bonus and the opportunity to work on state-of-the-art equipment and machinery? Founded nearly 100 years ago, this global business specializes in the manufacturing of a wife range of flooring solutions. Priding themselves on their international success, they have 15 sites across 26 countries, they have clear goals to be the all encompassed flooring solution across the globe. In this hands on role, you will be working on a 3-shift pattern, working within a small team of Engineers. The role will consist of both planned and reactive maintenance, along with fault finding on a range of equipment including hydraulics and pneumatics. The teams clear goals are too shift from reactive maintenance, to proactive maintenance, increasing the overall efficiencies of the shopfloor. This role would suit a Maintenance Engineer from an electrical background, looking for a role within a globally recognised business, offering a generous bonus scheme and the chance to work on some state of the art equipment? The Role: Planned and reactive maintenance on a variety of mechanical machinery Working on hydraulics, pumps and pneumatics 3 shift patten - 06:00-14:00 / 14:00 - 22:00 / 22:00 - 06:00 Monday - Friday, with weekend overtime available The Person: Maintenance Engineer Electrical background Mechanical Maintenance Apprentice Trained Reference Number: BBBH24919a Maintenance, Engineer, Mechanical, Fitter, Equipment, Reactive, Planned, Shift, Flooring, Manufacture, Manufacturing, Ripley, Nottingham If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Tool Fitter / Driver (Mechanical) Location: Trafford, Manchester Pay Rate: £27,000 per annum Hours: Monday Friday, 8:00am 5:00pm Overview: We are recruiting a Tool Fitter / Driver with mechanical experience to support a busy workshop operation in Trafford, Manchester. This is a varied role combining equipment maintenance, repairs, and driving duties , making it ideal for someone hands-on and adaptable. You will be responsible for maintaining a range of equipment while also supporting deliveries, collections, and occasional breakdown assistance. Key Responsibilities: Service, repair, and maintain a range of equipment and accessories Carry out all work to a high standard in line with company requirements Complete all job paperwork accurately from start to finish Ensure all health and safety procedures are followed at all times Maintain a clean and organised work area Use and care for company-issued tools correctly Additional Responsibilities: Assist with loading and unloading company and customer vehicles Support external equipment breakdowns when required Work alongside other workshop staff for training and support Driving Duties: Carry out deliveries and collections as required Provide cover during busy periods, holidays, and absences Attend external breakdowns when necessary Requirements: Full UK Driving Licence (essential) Previous mechanical experience (essential) Hands-on, practical approach to work Reliable and able to work as part of a team Good attention to detail and safety awareness Breaks: 15 minutes (morning) 30 minutes (lunch) 15 minutes (afternoon) What s on Offer: £27,000 per annum Monday to Friday working hours Varied role combining workshop and driving duties Opportunity to develop within a hands-on environment indliv
May 11, 2026
Full time
Tool Fitter / Driver (Mechanical) Location: Trafford, Manchester Pay Rate: £27,000 per annum Hours: Monday Friday, 8:00am 5:00pm Overview: We are recruiting a Tool Fitter / Driver with mechanical experience to support a busy workshop operation in Trafford, Manchester. This is a varied role combining equipment maintenance, repairs, and driving duties , making it ideal for someone hands-on and adaptable. You will be responsible for maintaining a range of equipment while also supporting deliveries, collections, and occasional breakdown assistance. Key Responsibilities: Service, repair, and maintain a range of equipment and accessories Carry out all work to a high standard in line with company requirements Complete all job paperwork accurately from start to finish Ensure all health and safety procedures are followed at all times Maintain a clean and organised work area Use and care for company-issued tools correctly Additional Responsibilities: Assist with loading and unloading company and customer vehicles Support external equipment breakdowns when required Work alongside other workshop staff for training and support Driving Duties: Carry out deliveries and collections as required Provide cover during busy periods, holidays, and absences Attend external breakdowns when necessary Requirements: Full UK Driving Licence (essential) Previous mechanical experience (essential) Hands-on, practical approach to work Reliable and able to work as part of a team Good attention to detail and safety awareness Breaks: 15 minutes (morning) 30 minutes (lunch) 15 minutes (afternoon) What s on Offer: £27,000 per annum Monday to Friday working hours Varied role combining workshop and driving duties Opportunity to develop within a hands-on environment indliv
Electrical Maintenance Engineer Location: Colchester area Salary: Negotiable depending on experience + Overtime A leading UK manufacturer of construction products is looking for an experienced Electrical Maintenance Engineer /Fitter to join their busy production facilities in the Colchester area. This is a hands-on role where you'll keep high-output machinery running safely and efficiently. If you are an Electrically biased engineer with manufacturing experience , then this role offers variety and a great benefits package. Benefits 23 days holiday plus bank holidays Overtime available Private medical insurance Subsidised on-site canteen Profit related and performance related bonuses Contributory pension scheme Free on-site parking Sick pay Key Responsibilities Diagnose, repair, and maintain electrical systems and industrial machinery Work on PLC-controlled equipment, overhead cranes, batching systems, and concrete cutting saws Carry out planned preventative maintenance (PPM) and reactive repairs Maintain and replace mechanical components (bearings, chains, sprockets, drives) Assist with machinery installation, upgrades, and basic fabrication Ensure all work complies with health & safety regulations Skills & Experience NVQ Level 3 / City & Guilds / BTEC in Electrical Engineering (or equivalent) 17th or 18th Edition IEE Wiring Regulations qualified Strong electrical fault-finding and repair skills Industrial/manufacturing experience preferred (concrete, heavy plant, or construction materials) PLC knowledge (Siemens S7 or similar) Mechanically competent with basic fabrication skills Physically fit, reliable, and able to work in a factory/workshop environment Own transport required ; flexible to work overtime/weekends To find out more about this is a fantastic opportunity for an Electrical Maintenance Engineer to join a skilled maintenance team call Julia at Prime Appointments or Apply via the link today! Candidates who require sponsorship now or in the future will not be considered for this role.
May 11, 2026
Full time
Electrical Maintenance Engineer Location: Colchester area Salary: Negotiable depending on experience + Overtime A leading UK manufacturer of construction products is looking for an experienced Electrical Maintenance Engineer /Fitter to join their busy production facilities in the Colchester area. This is a hands-on role where you'll keep high-output machinery running safely and efficiently. If you are an Electrically biased engineer with manufacturing experience , then this role offers variety and a great benefits package. Benefits 23 days holiday plus bank holidays Overtime available Private medical insurance Subsidised on-site canteen Profit related and performance related bonuses Contributory pension scheme Free on-site parking Sick pay Key Responsibilities Diagnose, repair, and maintain electrical systems and industrial machinery Work on PLC-controlled equipment, overhead cranes, batching systems, and concrete cutting saws Carry out planned preventative maintenance (PPM) and reactive repairs Maintain and replace mechanical components (bearings, chains, sprockets, drives) Assist with machinery installation, upgrades, and basic fabrication Ensure all work complies with health & safety regulations Skills & Experience NVQ Level 3 / City & Guilds / BTEC in Electrical Engineering (or equivalent) 17th or 18th Edition IEE Wiring Regulations qualified Strong electrical fault-finding and repair skills Industrial/manufacturing experience preferred (concrete, heavy plant, or construction materials) PLC knowledge (Siemens S7 or similar) Mechanically competent with basic fabrication skills Physically fit, reliable, and able to work in a factory/workshop environment Own transport required ; flexible to work overtime/weekends To find out more about this is a fantastic opportunity for an Electrical Maintenance Engineer to join a skilled maintenance team call Julia at Prime Appointments or Apply via the link today! Candidates who require sponsorship now or in the future will not be considered for this role.
Maintenance Team Leader Location: Sileby Salary: £52,000 Shift: 3 Shift (Days, Afternoons, Nights) We're working with a well established manufacturing business that's looking for a Shift Maintenance Team Leader to take charge of a multi-skilled team focused on reactive maintenance. This is a hands on leadership role where you'll be right in the middle of the action coordinating breakdown response, supporting the team technically, and making sure issues are dealt with quickly and safely. It would suit someone who's stepped up from the tools or already leading a team, and is confident making decisions under pressure. Benefits 17% Pension 25 days holiday plus bank holidays Life assurance Training and development opportunities Enhanced parental leave Cycle to work scheme What you'll be doing You'll be leading from the front, keeping the plant running and supporting your team to respond effectively to breakdowns: Leading and organising the reactive maintenance team based on priorities and risk Responding quickly to breakdowns and coordinating repairs to minimise downtime Providing technical support to electricians, fitters, and multi-skilled engineers Making sure all work is completed safely and to a high standard Keeping accurate records of faults, repairs, and parts used in the CMMS Communicating clearly with production on plant status and repair plans Spotting recurring issues and feeding into longer-term improvements Ensuring all safety procedures are followed (LOTO, PPE, isolations) Running toolbox talks and safety briefings Monitoring team performance and key maintenance KPIs Supporting the development of the team through coaching and mentoring The right candidate We're after someone who can lead, organise, and stay calm under pressure: Background as a Maintenance Fitter, Electrician, or multi-skilled engineer Previous leadership or supervisory experience Strong fault finding and problem solving skills (mechanical and/or electrical) Ability to prioritise breakdowns and manage workload effectively Good understanding of plant equipment (conveyors, pumps, mixers, etc.) Clear communication and strong organisational skills A solid approach to safety and site procedures If you are interested in this role, get in touch with Josh Sharkey from Stirling Warrington for this role or any other role across the East Midlands. INDSW
May 11, 2026
Full time
Maintenance Team Leader Location: Sileby Salary: £52,000 Shift: 3 Shift (Days, Afternoons, Nights) We're working with a well established manufacturing business that's looking for a Shift Maintenance Team Leader to take charge of a multi-skilled team focused on reactive maintenance. This is a hands on leadership role where you'll be right in the middle of the action coordinating breakdown response, supporting the team technically, and making sure issues are dealt with quickly and safely. It would suit someone who's stepped up from the tools or already leading a team, and is confident making decisions under pressure. Benefits 17% Pension 25 days holiday plus bank holidays Life assurance Training and development opportunities Enhanced parental leave Cycle to work scheme What you'll be doing You'll be leading from the front, keeping the plant running and supporting your team to respond effectively to breakdowns: Leading and organising the reactive maintenance team based on priorities and risk Responding quickly to breakdowns and coordinating repairs to minimise downtime Providing technical support to electricians, fitters, and multi-skilled engineers Making sure all work is completed safely and to a high standard Keeping accurate records of faults, repairs, and parts used in the CMMS Communicating clearly with production on plant status and repair plans Spotting recurring issues and feeding into longer-term improvements Ensuring all safety procedures are followed (LOTO, PPE, isolations) Running toolbox talks and safety briefings Monitoring team performance and key maintenance KPIs Supporting the development of the team through coaching and mentoring The right candidate We're after someone who can lead, organise, and stay calm under pressure: Background as a Maintenance Fitter, Electrician, or multi-skilled engineer Previous leadership or supervisory experience Strong fault finding and problem solving skills (mechanical and/or electrical) Ability to prioritise breakdowns and manage workload effectively Good understanding of plant equipment (conveyors, pumps, mixers, etc.) Clear communication and strong organisational skills A solid approach to safety and site procedures If you are interested in this role, get in touch with Josh Sharkey from Stirling Warrington for this role or any other role across the East Midlands. INDSW
Role: Mechanical Assembler / Fitter Location: Bedfordshire Hours: 39 hours per week, Monday to Friday Salary: £32,400 An excellent opportunity has now arisen for a Multi-skilled Mechanical Assembler / Fitter to join a long established and respected engineering manufacturing company. This is an interesting and varied role, assembling and fitting high-quality components used in stainless steel food processing equipment. Duties of a Mechanical Assembler / Fitter: Assemble and fit manufacturing components to a high standard Work from engineering drawings to complete builds accurately Carry out mechanical motor fitting, stripping, and rebuilding Build and install pneumatic and hydraulic systems Assemble and fit bearing housings Use a range of hand tools and mechanical equipment Build special purpose machinery Maintain high standards of housekeeping and organisation Follow health & safety procedures, including risk assessments and method statements Adhere to company rules and processes Work in the factory or on client sites when required What we would like from you: Proven experience in mechanical assembly and fitting Experience with motors, pneumatics, hydraulics, and machinery builds Ability to read and understand engineering drawings Proficiency with hand tools and mechanical equipment Strong attention to detail and quality standards Ability to work effectively within a team A recognised engineering qualification (e.g. City & Guilds) is desirable or equivalent experience Working Hours: Monday: 7:30am - 1:00pm / 1:30pm - 4:00pm Tuesday: 7:30am - 1:00pm / 1:30pm - 4:30pm Wednesday & Thursday: 7:30am - 1:00pm / 1:30pm - 5:00pm Friday: 7:30am - 12:00pm Overtime is generally available and paid at 1.5x Monday to Friday and Saturday mornings. Benefits: Annual bonus based on company performance 20 days holiday + bank holidays (increasing to 26 with service) Life assurance Sick pay scheme Pension scheme Workwear provided Subsidised drinks and snacks Staff meals and events If you are interested in this role, please apply below with your most recent CV. BEDFORDPERM By applying to this job advertisement, you confirm you have read and understood our and give OA Group authorisation to hold you provided data . Thank you for your interest in this vacancy, which is being advertised by OA Group, who are acting as an employment agency / business. Your application will be considered in competition with others and we will contact you within 3 working days.
May 11, 2026
Full time
Role: Mechanical Assembler / Fitter Location: Bedfordshire Hours: 39 hours per week, Monday to Friday Salary: £32,400 An excellent opportunity has now arisen for a Multi-skilled Mechanical Assembler / Fitter to join a long established and respected engineering manufacturing company. This is an interesting and varied role, assembling and fitting high-quality components used in stainless steel food processing equipment. Duties of a Mechanical Assembler / Fitter: Assemble and fit manufacturing components to a high standard Work from engineering drawings to complete builds accurately Carry out mechanical motor fitting, stripping, and rebuilding Build and install pneumatic and hydraulic systems Assemble and fit bearing housings Use a range of hand tools and mechanical equipment Build special purpose machinery Maintain high standards of housekeeping and organisation Follow health & safety procedures, including risk assessments and method statements Adhere to company rules and processes Work in the factory or on client sites when required What we would like from you: Proven experience in mechanical assembly and fitting Experience with motors, pneumatics, hydraulics, and machinery builds Ability to read and understand engineering drawings Proficiency with hand tools and mechanical equipment Strong attention to detail and quality standards Ability to work effectively within a team A recognised engineering qualification (e.g. City & Guilds) is desirable or equivalent experience Working Hours: Monday: 7:30am - 1:00pm / 1:30pm - 4:00pm Tuesday: 7:30am - 1:00pm / 1:30pm - 4:30pm Wednesday & Thursday: 7:30am - 1:00pm / 1:30pm - 5:00pm Friday: 7:30am - 12:00pm Overtime is generally available and paid at 1.5x Monday to Friday and Saturday mornings. Benefits: Annual bonus based on company performance 20 days holiday + bank holidays (increasing to 26 with service) Life assurance Sick pay scheme Pension scheme Workwear provided Subsidised drinks and snacks Staff meals and events If you are interested in this role, please apply below with your most recent CV. BEDFORDPERM By applying to this job advertisement, you confirm you have read and understood our and give OA Group authorisation to hold you provided data . Thank you for your interest in this vacancy, which is being advertised by OA Group, who are acting as an employment agency / business. Your application will be considered in competition with others and we will contact you within 3 working days.
Field Service Engineer - Manufacturer South East - Regional Role £35,000 - £40,000 (£45,000+OTE) + Training + Regular OT x1.5 x2 + Van, door to door, bonus, benefits package Mon-Thurs 8-5 Fri 8-2 37.5 hour week Are you a service engineer with electrical knowledge, looking to join a leading international manufacturing company, offering a great package, fantastic earning potential and full training? Are you looking for a change of industry with a company that will train you on new equipment and offer the chance to work on some prestigious, world famous sites? The company are industry leading manufacturers of high quality anti-terrorism and security equipment, rising bollards, road blockers and much more and due to the securing of new contracts they require an additional service engineer to join the team. You will be based from home, travelling to amazing sites such as football stadiums, high profile government buildings, palaces, embassies and much more. The role will offer variety every day with a mix of installations, ppm, reactive maintenance and repairs. With the option of international travel at your discretion, this is an excellent opportunity to work on high quality specialist equipment, whilst receiving a great package full of additional benefits. You will be covering the South Wales area, with some additional travel as required. There is regular overtime available to significantly boost your earnings and you will also receive a substantial package including bonus, paid lunch allowance, 33 days holiday and more. The Role: Field Service engineer - M4 Corridor Regional Role Working directly for the manufacturer 37.5 hour week, then straight to x1.5 + door to door travel 1 in 7 call out rota -additional payments 33 days holiday, bonus, door to door, paid lunch allowance, rewards discounts scheme Candidate requirements: Mechanical/Electrical/Hydraulic Skills Field service experience Driving License George Mallett - REF 4393X elix sourcing solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Field service engineer, mobile engineer, maintenance engineer, multiskilled engineer, security engineer, service technician, electrical engineer, mechanical fitter, Plant fitter, industrial engineer, agricultural engineer, Reading, Swindon, Newbury, Basingstoke, M4, M25, London, Surrey, Heathrow, Slough, Luton, Portsmouth, Oxford
May 11, 2026
Full time
Field Service Engineer - Manufacturer South East - Regional Role £35,000 - £40,000 (£45,000+OTE) + Training + Regular OT x1.5 x2 + Van, door to door, bonus, benefits package Mon-Thurs 8-5 Fri 8-2 37.5 hour week Are you a service engineer with electrical knowledge, looking to join a leading international manufacturing company, offering a great package, fantastic earning potential and full training? Are you looking for a change of industry with a company that will train you on new equipment and offer the chance to work on some prestigious, world famous sites? The company are industry leading manufacturers of high quality anti-terrorism and security equipment, rising bollards, road blockers and much more and due to the securing of new contracts they require an additional service engineer to join the team. You will be based from home, travelling to amazing sites such as football stadiums, high profile government buildings, palaces, embassies and much more. The role will offer variety every day with a mix of installations, ppm, reactive maintenance and repairs. With the option of international travel at your discretion, this is an excellent opportunity to work on high quality specialist equipment, whilst receiving a great package full of additional benefits. You will be covering the South Wales area, with some additional travel as required. There is regular overtime available to significantly boost your earnings and you will also receive a substantial package including bonus, paid lunch allowance, 33 days holiday and more. The Role: Field Service engineer - M4 Corridor Regional Role Working directly for the manufacturer 37.5 hour week, then straight to x1.5 + door to door travel 1 in 7 call out rota -additional payments 33 days holiday, bonus, door to door, paid lunch allowance, rewards discounts scheme Candidate requirements: Mechanical/Electrical/Hydraulic Skills Field service experience Driving License George Mallett - REF 4393X elix sourcing solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Field service engineer, mobile engineer, maintenance engineer, multiskilled engineer, security engineer, service technician, electrical engineer, mechanical fitter, Plant fitter, industrial engineer, agricultural engineer, Reading, Swindon, Newbury, Basingstoke, M4, M25, London, Surrey, Heathrow, Slough, Luton, Portsmouth, Oxford
Mechanical Fitter West Midlands 35,000 + Overtime & Benefits Afternoon Shift: Monday-Thursday, 40 hours per week Overtime: 20/hour Sundays: 33.65/hour Pro rata holiday The Opportunity We're partnering with a long established, heavy engineering manufacturer supplying high quality ductile iron and steel castings into the turbo, manifold and general engineering sectors. Operating across two manufacturing sites, the business is committed to reliability, safety and continuous improvement in a demanding foundry environment. This is a key hands on maintenance role within an experienced engineering team, ideal for a Mechanical Fitter who enjoys fault finding, improving reliability and working close to production to keep critical plant running at performance. What You'll Do Reporting to the Engineering Manager , you'll play a vital part in maintaining and improving foundry plant reliability across two sites. Day to day, you will: - Carry out planned preventative maintenance (PPM), reactive maintenance and mechanical repairs to minimise downtime - Diagnose faults on heavy foundry equipment including mechanical transmissions, hydraulic and pneumatic systems - Undertake installation, inspection and repair of mechanical plant and ancillary equipment - Fabricate and repair components using MIG welding, machining and bench fitting techniques - Support continuous improvement initiatives, contributing ideas to improve safety, productivity and OEE You'll also work closely with production teams and fellow engineers to ensure plant performance supports manufacturing output and quality targets. What's On Offer - Salary: 35,000 - Overtime: 20 per hour (Sundays paid at 33.65 per hour) - Shift pattern: Afternoon shift, Monday to Thursday - Hours: 40 hours per week, between 12:00-22:00 - Paid lunch break: 30 minutes per day - Holiday: Pro rata entitlement - Strong commitment to training, safety and continuous improvement - Stable, long term opportunity within a well?established manufacturing business Flexibility is required, with overtime and occasional weekend working to support operational demands. What We're Looking For You'll be an experienced Mechanical Fitter from a heavy engineering or manufacturing environment, ideally with exposure to foundry or similar process driven plant. You'll bring: - Proven experience maintaining, repairing and fault finding on mechanical systems and equipment - Hands on skills in fabrication, welding (MIG), machining and mechanical assembly - A strong safety mindset with experience of working under permit to work and risk assessments - A flexible, proactive attitude and the ability to work independently or as part of a team Formal qualifications are advantageous but not essential if you can demonstrate solid, practical experience and a commitment to learning and continuous improvement. Call to Action If this sounds like the right next step, apply directly through this advert or contact me for a confidential discussion before applying. Please note: our client's identity will be shared with shortlisted candidates at interview stage.
May 09, 2026
Full time
Mechanical Fitter West Midlands 35,000 + Overtime & Benefits Afternoon Shift: Monday-Thursday, 40 hours per week Overtime: 20/hour Sundays: 33.65/hour Pro rata holiday The Opportunity We're partnering with a long established, heavy engineering manufacturer supplying high quality ductile iron and steel castings into the turbo, manifold and general engineering sectors. Operating across two manufacturing sites, the business is committed to reliability, safety and continuous improvement in a demanding foundry environment. This is a key hands on maintenance role within an experienced engineering team, ideal for a Mechanical Fitter who enjoys fault finding, improving reliability and working close to production to keep critical plant running at performance. What You'll Do Reporting to the Engineering Manager , you'll play a vital part in maintaining and improving foundry plant reliability across two sites. Day to day, you will: - Carry out planned preventative maintenance (PPM), reactive maintenance and mechanical repairs to minimise downtime - Diagnose faults on heavy foundry equipment including mechanical transmissions, hydraulic and pneumatic systems - Undertake installation, inspection and repair of mechanical plant and ancillary equipment - Fabricate and repair components using MIG welding, machining and bench fitting techniques - Support continuous improvement initiatives, contributing ideas to improve safety, productivity and OEE You'll also work closely with production teams and fellow engineers to ensure plant performance supports manufacturing output and quality targets. What's On Offer - Salary: 35,000 - Overtime: 20 per hour (Sundays paid at 33.65 per hour) - Shift pattern: Afternoon shift, Monday to Thursday - Hours: 40 hours per week, between 12:00-22:00 - Paid lunch break: 30 minutes per day - Holiday: Pro rata entitlement - Strong commitment to training, safety and continuous improvement - Stable, long term opportunity within a well?established manufacturing business Flexibility is required, with overtime and occasional weekend working to support operational demands. What We're Looking For You'll be an experienced Mechanical Fitter from a heavy engineering or manufacturing environment, ideally with exposure to foundry or similar process driven plant. You'll bring: - Proven experience maintaining, repairing and fault finding on mechanical systems and equipment - Hands on skills in fabrication, welding (MIG), machining and mechanical assembly - A strong safety mindset with experience of working under permit to work and risk assessments - A flexible, proactive attitude and the ability to work independently or as part of a team Formal qualifications are advantageous but not essential if you can demonstrate solid, practical experience and a commitment to learning and continuous improvement. Call to Action If this sounds like the right next step, apply directly through this advert or contact me for a confidential discussion before applying. Please note: our client's identity will be shared with shortlisted candidates at interview stage.
MTrec Recruitment
Newcastle Upon Tyne, Tyne And Wear
Rewards and Benefits on Offer; Immediate start available Competitive basic salary Dayshift Free on-site parking A streamlined, quick interview process MTrec's New Opportunity; MTrec Technical are proudly representing our prestigious manufacturing client, based just North of Newcastle by recruiting a permanent Maintenance Fitter. You will be joining an industry leading company, with an excellent team-based culture and fantastic long-term career prospects . If you have a background within Maintenance, ideally multiskilled with a mechanical bias, apply now for an immediate response The Job You'll Do; This is a hands-on, shop-floor critical role responsible for maintaining, repairing, and improving all production equipment Proactively prevent failures, diagnose issues quickly, and keep production running across: the press and machine shops as well as plant facilities Implement strategies to reduce downtime as much as possible Breakdown response & fault finding - Rapid response to equipment breakdowns across site Diagnose mechanical faults under pressure with minimal information Carry out effective repairs to restore production quickly Execute and improve PPM schedules across all equipment Identify weak points and implement permanent fixes Ensure all maintenance is logged, tracked, and auditable Strip, inspect, rebuild, and install mechanical components including: bearings, shafts, gearboxes, hydraulic & pneumatic systems and tooling Focus on continuous improvement Work to strict HSE standards at all times Support Production About You; NVQ Level 3 / Apprenticeship in Mechanical Engineering (or equivalent) Time-served Maintenance Fitter preferred Strong mechanical background in heavy industrial / manufacturing environments Experience with: Hydraulics & pneumatics, bearings, drives, and rotating equipment Confident in fault finding under pressure Able to read and interpret mechanical drawings Electrical fault-finding experience
May 09, 2026
Full time
Rewards and Benefits on Offer; Immediate start available Competitive basic salary Dayshift Free on-site parking A streamlined, quick interview process MTrec's New Opportunity; MTrec Technical are proudly representing our prestigious manufacturing client, based just North of Newcastle by recruiting a permanent Maintenance Fitter. You will be joining an industry leading company, with an excellent team-based culture and fantastic long-term career prospects . If you have a background within Maintenance, ideally multiskilled with a mechanical bias, apply now for an immediate response The Job You'll Do; This is a hands-on, shop-floor critical role responsible for maintaining, repairing, and improving all production equipment Proactively prevent failures, diagnose issues quickly, and keep production running across: the press and machine shops as well as plant facilities Implement strategies to reduce downtime as much as possible Breakdown response & fault finding - Rapid response to equipment breakdowns across site Diagnose mechanical faults under pressure with minimal information Carry out effective repairs to restore production quickly Execute and improve PPM schedules across all equipment Identify weak points and implement permanent fixes Ensure all maintenance is logged, tracked, and auditable Strip, inspect, rebuild, and install mechanical components including: bearings, shafts, gearboxes, hydraulic & pneumatic systems and tooling Focus on continuous improvement Work to strict HSE standards at all times Support Production About You; NVQ Level 3 / Apprenticeship in Mechanical Engineering (or equivalent) Time-served Maintenance Fitter preferred Strong mechanical background in heavy industrial / manufacturing environments Experience with: Hydraulics & pneumatics, bearings, drives, and rotating equipment Confident in fault finding under pressure Able to read and interpret mechanical drawings Electrical fault-finding experience
Mechanical Fitter Luton Double Day Shifts £40,625 per year (including shift allowance)+ Overtime + Early Finish on Fridays + 33 Days Holiday + Training + Progression An excellent opportunity for an Assembly Fitter from a manufacturing background to join a well-established and industry-leading company, offering plenty of overtime and ongoing technical development. Do you have experience reading engineering drawings and assembling mechanical equipment? Are you apprentice trained or time served? Are you looking to work on complex, high-value equipment with opportunities to further develop your skills? This company has a heritage spanning over 200 years and is a global leader in their industry. Due to continued growth, they are looking to expand their assembly team, offering long-term stability, training, and opportunities to increase earnings through overtime. This role would suit an Assembly Fitter with experience in mechanical assembly, looking for a position that offers technical development and the chance to boost earnings. The Role: Assemble mechanical units to engineering specifications, interpret technical drawings and quality procedures, conduct pressure testing and complete documentation, carry out inspections and produce reports, use measuring equipment and workshop tools safely, prepare units for dispatch 37 hours per week - Monday to Thursday: 6:00am to 2:15pm/2:15pm to 10:30pm. Friday: 6:00am to 12:00pm/12:00pm-6:00pm The Person: Proven experience within a manufacturing environment Mechanical qualifications desirable Strong problem-solving skills and attention to detail Reference Number: BBBH273097 To apply for this role or to be considered for further positions, please click "Apply Now" or contact Sophie Fox at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
May 08, 2026
Full time
Mechanical Fitter Luton Double Day Shifts £40,625 per year (including shift allowance)+ Overtime + Early Finish on Fridays + 33 Days Holiday + Training + Progression An excellent opportunity for an Assembly Fitter from a manufacturing background to join a well-established and industry-leading company, offering plenty of overtime and ongoing technical development. Do you have experience reading engineering drawings and assembling mechanical equipment? Are you apprentice trained or time served? Are you looking to work on complex, high-value equipment with opportunities to further develop your skills? This company has a heritage spanning over 200 years and is a global leader in their industry. Due to continued growth, they are looking to expand their assembly team, offering long-term stability, training, and opportunities to increase earnings through overtime. This role would suit an Assembly Fitter with experience in mechanical assembly, looking for a position that offers technical development and the chance to boost earnings. The Role: Assemble mechanical units to engineering specifications, interpret technical drawings and quality procedures, conduct pressure testing and complete documentation, carry out inspections and produce reports, use measuring equipment and workshop tools safely, prepare units for dispatch 37 hours per week - Monday to Thursday: 6:00am to 2:15pm/2:15pm to 10:30pm. Friday: 6:00am to 12:00pm/12:00pm-6:00pm The Person: Proven experience within a manufacturing environment Mechanical qualifications desirable Strong problem-solving skills and attention to detail Reference Number: BBBH273097 To apply for this role or to be considered for further positions, please click "Apply Now" or contact Sophie Fox at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
The Opportunity Our client is looking for a skilled and reliable LCV Technician / Fitter to join a busy and well-established Plant & Fleet team. This is a hands-on role where you'll play a key part in keeping a large and varied fleet of vehicles and equipment safe, compliant, and ready for action. If you enjoy problem-solving, take pride in your work, and want a role where no two days are the same-this could be a great fit. What You'll Be Doing Carrying out routine servicing, inspections, and maintenance on fleet vehicles Diagnosing and repairing mechanical and electrical faults efficiently Completing both minor fixes and more complex repair work Using a handheld device to log work, track repairs, and maintain accurate records Monitoring vehicle condition and reporting damage or defects Supporting safe working practices and following all compliance procedures What We're Looking For NVQ Level 3 (or equivalent) in Light Vehicle Maintenance & Repair Previous experience working on LCVs or similar fleet vehicles Confident using diagnostic equipment to identify faults Ability to work independently and manage your own workload Full UK driving licence (essential) What's On Offer Competitive hourly rate with overtime available Annual bonus scheme 25 days holiday + bank holidays Company pension scheme Life assurance Employee assistance programme & 24/7 GP access Retail discounts and reward schemes Cycle to work scheme and financial wellbeing support Enhanced family-friendly benefits Tool allowance Referral bonus scheme
May 08, 2026
Full time
The Opportunity Our client is looking for a skilled and reliable LCV Technician / Fitter to join a busy and well-established Plant & Fleet team. This is a hands-on role where you'll play a key part in keeping a large and varied fleet of vehicles and equipment safe, compliant, and ready for action. If you enjoy problem-solving, take pride in your work, and want a role where no two days are the same-this could be a great fit. What You'll Be Doing Carrying out routine servicing, inspections, and maintenance on fleet vehicles Diagnosing and repairing mechanical and electrical faults efficiently Completing both minor fixes and more complex repair work Using a handheld device to log work, track repairs, and maintain accurate records Monitoring vehicle condition and reporting damage or defects Supporting safe working practices and following all compliance procedures What We're Looking For NVQ Level 3 (or equivalent) in Light Vehicle Maintenance & Repair Previous experience working on LCVs or similar fleet vehicles Confident using diagnostic equipment to identify faults Ability to work independently and manage your own workload Full UK driving licence (essential) What's On Offer Competitive hourly rate with overtime available Annual bonus scheme 25 days holiday + bank holidays Company pension scheme Life assurance Employee assistance programme & 24/7 GP access Retail discounts and reward schemes Cycle to work scheme and financial wellbeing support Enhanced family-friendly benefits Tool allowance Referral bonus scheme
HGV Maintenance Fitter Location - Grays, Thurrock We are recruiting on behalf of a well-established business. Due to continued growth, they are looking for three experienced HGV Maintenance Fitters to join their Vehicle Workshop team. Reporting to the Transport General Manager, you will be responsible for keeping a large commercial fleet running to the highest safety and legal standards. The Package Hourly rate: £23.37 Overtime Monday-Saturday: Time and a half (£35.06/hr) Overtime Sunday: Double time (£46.74/hr) Annual leave: 25 days per annum Hours: 42 hours per week Shift Pattern (06:00-19:00 window) Early: 06:00-15:00 Days: 07:00-16:00 Lates: 09:00-18:00 Key Responsibilities Service and inspect all vehicles to VOSA standard Diagnose and rectify mechanical faults across the fleet Carry out brakes, gearbox, and clutch repairs Identify, source, and order parts as required Attend breakdowns when necessary Complete and maintain all documentation on the vehicle maintenance system Keep workshop facilities, equipment, and tools clean and well maintained Requirements Previous experience in a busy HGV workshop environment - essential Proven background in heavy vehicle maintenance, repair, and diagnostics ADR experience and knowledge - essential Commitment to working to the highest standards at all times Comfortable completing documentation and using fleet management systems If you feel this is of interest please send your CV directly to Dan at or call for a confidential discussion on
May 08, 2026
Full time
HGV Maintenance Fitter Location - Grays, Thurrock We are recruiting on behalf of a well-established business. Due to continued growth, they are looking for three experienced HGV Maintenance Fitters to join their Vehicle Workshop team. Reporting to the Transport General Manager, you will be responsible for keeping a large commercial fleet running to the highest safety and legal standards. The Package Hourly rate: £23.37 Overtime Monday-Saturday: Time and a half (£35.06/hr) Overtime Sunday: Double time (£46.74/hr) Annual leave: 25 days per annum Hours: 42 hours per week Shift Pattern (06:00-19:00 window) Early: 06:00-15:00 Days: 07:00-16:00 Lates: 09:00-18:00 Key Responsibilities Service and inspect all vehicles to VOSA standard Diagnose and rectify mechanical faults across the fleet Carry out brakes, gearbox, and clutch repairs Identify, source, and order parts as required Attend breakdowns when necessary Complete and maintain all documentation on the vehicle maintenance system Keep workshop facilities, equipment, and tools clean and well maintained Requirements Previous experience in a busy HGV workshop environment - essential Proven background in heavy vehicle maintenance, repair, and diagnostics ADR experience and knowledge - essential Commitment to working to the highest standards at all times Comfortable completing documentation and using fleet management systems If you feel this is of interest please send your CV directly to Dan at or call for a confidential discussion on
Job Title: Paint Sprayer. Our client, based in Trafford Park, is looking to recruit an experienced Paint Sprayer . We have worked with this client for several years; they offer a first class working environment and the opportunity to work in the Rail sector. Paint Sprayer: Main Duties: Prepare and paint train wheels and axles. Using 2 pack airless paint systems. They require a Paint Sprayer with a minimum 2 years experience. Paint Sprayer: Hours of work: 3 shift rotating pattern - Monday to Friday: 06.00 - 14.00 Monday to Thursday, Friday 06.00 - 12 noon. 14.00 - 22.00 Monday to Thursday, Friday 12.00 - 18.00. Nights: 22.00 - 06.00 Monday to Thursday & Friday: 18.00 - midnight. What they are looking for in candidates: Paint Sprayer: Qualifications / Skills/ Experience: Candidates must have experience painting in an engineering / industrial environment. Salary / Hourly Rates: 2 shift rate: £17.34 per hour. 3 shift rate: £18.95 per hour. Benefits Package: 25 days holiday plus BH's. This is a temporary to permanent vacancy. How to apply for the Job Title role: Ambitek are specialist recruiters in Manufacturing, Production and the Engineering sectors. We recruit for blue collar and white-collar roles, covering a variety of roles from cnc machinists, Welders, Platers, Fitters, Maintenance engineers, Inspectors, Mechanical fitters, Sheet Metal Workers through to Sales Engineers, Design Engineers, Production and Planning roles and management positions. If this role does not suite, please get in touch and we may be able to find something suitable. Please note that if you have applied for a role but do not meet the criteria outlined above, we will not be able to take your cv forward to the next stage and due to the volume of applicants we may not be able to respond to all applicants. If you haven t heard from us within 48 hours you will have been unsuccessful. Our client is a medium sized Engineering workshop. They are now looking for an experienced Airless wet paint sprayer using two pack system. The candidates must have plenty of experience of airless wet paint spraying and preferably in an engineering / industrial environment. You also need to be used to weight measuring paint and hardener. Hours of work. 6-2 & 2-10 Monday to Friday. Friday is 06.00 - 12 noon and 12 noon - 6pm. Nights: 22.00 - 06.00 Monday to Thursday. Friday: 18.00 - 24.00 You must be flexible to work the 3 week rotating shift pattern. To apply for this role please forward your cv in word format. All candidates will need to pass a drugs & alcohol test before starting. We thank all candidates for their applications, however we will only contact applicants who closely meet the criteria of the post. The details of the above position have been kept brief therefore additional duties may be involved as necessary.
May 08, 2026
Contractor
Job Title: Paint Sprayer. Our client, based in Trafford Park, is looking to recruit an experienced Paint Sprayer . We have worked with this client for several years; they offer a first class working environment and the opportunity to work in the Rail sector. Paint Sprayer: Main Duties: Prepare and paint train wheels and axles. Using 2 pack airless paint systems. They require a Paint Sprayer with a minimum 2 years experience. Paint Sprayer: Hours of work: 3 shift rotating pattern - Monday to Friday: 06.00 - 14.00 Monday to Thursday, Friday 06.00 - 12 noon. 14.00 - 22.00 Monday to Thursday, Friday 12.00 - 18.00. Nights: 22.00 - 06.00 Monday to Thursday & Friday: 18.00 - midnight. What they are looking for in candidates: Paint Sprayer: Qualifications / Skills/ Experience: Candidates must have experience painting in an engineering / industrial environment. Salary / Hourly Rates: 2 shift rate: £17.34 per hour. 3 shift rate: £18.95 per hour. Benefits Package: 25 days holiday plus BH's. This is a temporary to permanent vacancy. How to apply for the Job Title role: Ambitek are specialist recruiters in Manufacturing, Production and the Engineering sectors. We recruit for blue collar and white-collar roles, covering a variety of roles from cnc machinists, Welders, Platers, Fitters, Maintenance engineers, Inspectors, Mechanical fitters, Sheet Metal Workers through to Sales Engineers, Design Engineers, Production and Planning roles and management positions. If this role does not suite, please get in touch and we may be able to find something suitable. Please note that if you have applied for a role but do not meet the criteria outlined above, we will not be able to take your cv forward to the next stage and due to the volume of applicants we may not be able to respond to all applicants. If you haven t heard from us within 48 hours you will have been unsuccessful. Our client is a medium sized Engineering workshop. They are now looking for an experienced Airless wet paint sprayer using two pack system. The candidates must have plenty of experience of airless wet paint spraying and preferably in an engineering / industrial environment. You also need to be used to weight measuring paint and hardener. Hours of work. 6-2 & 2-10 Monday to Friday. Friday is 06.00 - 12 noon and 12 noon - 6pm. Nights: 22.00 - 06.00 Monday to Thursday. Friday: 18.00 - 24.00 You must be flexible to work the 3 week rotating shift pattern. To apply for this role please forward your cv in word format. All candidates will need to pass a drugs & alcohol test before starting. We thank all candidates for their applications, however we will only contact applicants who closely meet the criteria of the post. The details of the above position have been kept brief therefore additional duties may be involved as necessary.
CNC Service Engineer Wigan 40k-45k Shopfloor based Role Are you a skilled Mechanical fitter with some electrical experience? Have you had experience maintaining and servicing CNC Millers and Turners? Would you like to join an innovative and rapidly growing manufacturing company? If so, this role is for you. Lodestone Recruitment are currently recruiting on behalf of a well established manufacturing company based in Wigan, who are looking for a skilled CNC Service Engineer to join their team. They are looking for someone who can conduct maintenance (mostly mechanical with some electrical maintenance) on their CNC Machines, in order to optimise the machines and reduce their downtime. They are a company with a great reputation of looking after their staff, and boast a great employee retention rate. If you: Are an experienced mechanical fitter with basic electrical experience. Have serviced and maintained CNC Milling and Turning machines. Have experience in heavy engineering. This role is for you. As well as a great working environment, the company provides: Salary: 40k-45k depending on experience. Days Only Shopfloor based role Would this be an opportunity that you are interested in? Apply now if so. Lodestone Recruitment are acting as an employment agency with regards to this vacancy.
May 08, 2026
Full time
CNC Service Engineer Wigan 40k-45k Shopfloor based Role Are you a skilled Mechanical fitter with some electrical experience? Have you had experience maintaining and servicing CNC Millers and Turners? Would you like to join an innovative and rapidly growing manufacturing company? If so, this role is for you. Lodestone Recruitment are currently recruiting on behalf of a well established manufacturing company based in Wigan, who are looking for a skilled CNC Service Engineer to join their team. They are looking for someone who can conduct maintenance (mostly mechanical with some electrical maintenance) on their CNC Machines, in order to optimise the machines and reduce their downtime. They are a company with a great reputation of looking after their staff, and boast a great employee retention rate. If you: Are an experienced mechanical fitter with basic electrical experience. Have serviced and maintained CNC Milling and Turning machines. Have experience in heavy engineering. This role is for you. As well as a great working environment, the company provides: Salary: 40k-45k depending on experience. Days Only Shopfloor based role Would this be an opportunity that you are interested in? Apply now if so. Lodestone Recruitment are acting as an employment agency with regards to this vacancy.
Position: Diesel Fitter Location: Irlam, Manchester Rate: 16.93 ( 34,334 per annum) Diesel Fitter required for a well-established specialist supplier of hydraulic and Electric Submersible Pumps. The successful Candidate will be undertaking Dismantling, repair and fitting responsibilities on a range of Diesel Pumps, Gearboxes and Diesel Engines. It is envisioned that the successful candidate will come from a background in Marine or HGV Fitting, have completed a Mechanical apprenticeship and be based within a commutable distance of Irlam, Manchester Diesel Fitter Job Overview Split working between the company workshop and customer sites Dismantle, diagnose and fitting on a range of Diesel Pumps and Engines Undertaking repair work in the company workshop on Pumps, Gearboxes and Engines Visiting customer sites across Greater Manchester as and when required Attending callouts for breakdowns as per company rota Diesel Fitter Job Requirements Apprentice trained in mechanical Engineering Previous experience in Diesel Fitting, ideally on Pumps or Engines Confident in your ability to strip repair and fit mechanical components Previous experience as a diesel fitter for the marine sector would be a bonus Based within a commutable distance of Irlam, Manchester Full Driving licence - Non negotiable Diesel Fitter Salary & Benefits 16.93 per hour Full time, 39 hour week Monday to Thursday 8:00 - 16:30 Friday 8:00 - 15:30 Overtime Available 33 Days holiday including public holidays Pension Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
May 08, 2026
Full time
Position: Diesel Fitter Location: Irlam, Manchester Rate: 16.93 ( 34,334 per annum) Diesel Fitter required for a well-established specialist supplier of hydraulic and Electric Submersible Pumps. The successful Candidate will be undertaking Dismantling, repair and fitting responsibilities on a range of Diesel Pumps, Gearboxes and Diesel Engines. It is envisioned that the successful candidate will come from a background in Marine or HGV Fitting, have completed a Mechanical apprenticeship and be based within a commutable distance of Irlam, Manchester Diesel Fitter Job Overview Split working between the company workshop and customer sites Dismantle, diagnose and fitting on a range of Diesel Pumps and Engines Undertaking repair work in the company workshop on Pumps, Gearboxes and Engines Visiting customer sites across Greater Manchester as and when required Attending callouts for breakdowns as per company rota Diesel Fitter Job Requirements Apprentice trained in mechanical Engineering Previous experience in Diesel Fitting, ideally on Pumps or Engines Confident in your ability to strip repair and fit mechanical components Previous experience as a diesel fitter for the marine sector would be a bonus Based within a commutable distance of Irlam, Manchester Full Driving licence - Non negotiable Diesel Fitter Salary & Benefits 16.93 per hour Full time, 39 hour week Monday to Thursday 8:00 - 16:30 Friday 8:00 - 15:30 Overtime Available 33 Days holiday including public holidays Pension Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
My client is a leading FMCG manufacturing organisation with an impressive history and a fantastic reputation within the industries they serve. Due to a range of innovative developments and investment, they are going through an extensive period of growth. This includes new state-of-the-art manufacturing assets. They are now looking for a Mechanical Maintenance Engineer to join their site on the outskirts of Edinburgh. The successful candidate will be tasked with supporting the engineering team in reaching a higher level of standard. Responsibilities: Carry out planned and reactive maintenance on mechanical equipment as defined by our PPM schedule to the highest standard Work as part of a mechanical/electrical team, to keep our plant availability in line with operational commitments Assist with machine improvement projects Monitor, fault find, maintain and repair a wide variety of equipment including pumps, gearboxes, and specialist treatment process machinery Apply first level maintenance activities to all onsite assets Large plant complex repairs Using Breathing Apparatus and working in confined spaces if required (Training will be provided if required) Development of new skills both in and outside of your core discipline Working on fixed plant on Water and Waste Water Treatment sites to fault find, repair and maintain a wide variety of equipment including pumps, gearboxes, and specialist treatment process machinery. Work with other disciplines in a workshop team Follow the business and departmental rules associated with workflow and management An awareness of health and safety and works in a manner that keeps you and those around you safe Use our computerised maintenance management system to organise workload and work order response Education & Experience: All applicants should hold City & Guilds or similar vocational qualifications and have completed an apprenticeship or recognised training in mechanical discipline Relevant experience in a production / processing or manufacturing facility would be beneficial Well-developed interpersonal skills, ability to work in teams, to interact with colleagues and managers alike Excellent planning and organisational skills with the ability to take and respond to direction as required This is a Monday - Friday dayshift position
May 08, 2026
Full time
My client is a leading FMCG manufacturing organisation with an impressive history and a fantastic reputation within the industries they serve. Due to a range of innovative developments and investment, they are going through an extensive period of growth. This includes new state-of-the-art manufacturing assets. They are now looking for a Mechanical Maintenance Engineer to join their site on the outskirts of Edinburgh. The successful candidate will be tasked with supporting the engineering team in reaching a higher level of standard. Responsibilities: Carry out planned and reactive maintenance on mechanical equipment as defined by our PPM schedule to the highest standard Work as part of a mechanical/electrical team, to keep our plant availability in line with operational commitments Assist with machine improvement projects Monitor, fault find, maintain and repair a wide variety of equipment including pumps, gearboxes, and specialist treatment process machinery Apply first level maintenance activities to all onsite assets Large plant complex repairs Using Breathing Apparatus and working in confined spaces if required (Training will be provided if required) Development of new skills both in and outside of your core discipline Working on fixed plant on Water and Waste Water Treatment sites to fault find, repair and maintain a wide variety of equipment including pumps, gearboxes, and specialist treatment process machinery. Work with other disciplines in a workshop team Follow the business and departmental rules associated with workflow and management An awareness of health and safety and works in a manner that keeps you and those around you safe Use our computerised maintenance management system to organise workload and work order response Education & Experience: All applicants should hold City & Guilds or similar vocational qualifications and have completed an apprenticeship or recognised training in mechanical discipline Relevant experience in a production / processing or manufacturing facility would be beneficial Well-developed interpersonal skills, ability to work in teams, to interact with colleagues and managers alike Excellent planning and organisational skills with the ability to take and respond to direction as required This is a Monday - Friday dayshift position
Peterborough Salary - Negotiable DOE Monday - Friday days. Your new role: Based in Peterborough, you will be joining the UK's leading water/ clean water equipment and processing manufacturing business, who now, due to continued growth, are looking for a Mechanical Fitter to join their engineering team on a 12 month fixed term contract click apply for full job details
May 08, 2026
Full time
Peterborough Salary - Negotiable DOE Monday - Friday days. Your new role: Based in Peterborough, you will be joining the UK's leading water/ clean water equipment and processing manufacturing business, who now, due to continued growth, are looking for a Mechanical Fitter to join their engineering team on a 12 month fixed term contract click apply for full job details
