About the opportunity Netcom Training's government-funded Cyber security course is your route into one of tech's fastest-growing fields. Learn threat intelligence, security testing and incident response in an interactive online format and earn a nationally recognised NCFE Level 3 Certificate in Cyber Security Practices. Course details Duration: 14 weeks Format: Online, practical workshops Schedule: Mon-Thu 6pm-9pm Start date: 14th September 2026 (suggested - see flag above) Spaces: Limited to 35 learners per cohort What you'll learn Applying cyber security principles and risk assessment Gathering threat intelligence, including open source intelligence (OSINT) Carrying out security testing and identifying vulnerabilities Planning incident response and writing post-incident reports Potential roles this training could lead to Information Security Analyst Incident Responder Analyst Junior Forensic Analyst Entry Level Compliance Specialist Additional benefits High-impact employability workshops Six months' access to online employability courses Ongoing career support Eligibility Live in Hertfordshire Be aged 19 or over Earn below the gross annual wage cap of TBC Not currently be undertaking any other government funded training Not be in the UK on a student, graduate, postgraduate or sponsorship visa, or as a dependent of someone who is Cost This is a free government funded course Potential roles this training could lead to IT Systems Administrator Technical Support Technician Entry Level IT Technician Helpdesk Analyst Additional benefits High-impact employability workshops Six months' access to online employability courses Ongoing career support Eligibility Live in Hertfordshire Be aged 19 or over Not currently be undertaking any other government funded training Not be in the UK on a student, graduate, postgraduate or sponsorship visa, or as a dependent of someone who is Cost This is a free government funded course
Aug 30, 2026
Full time
About the opportunity Netcom Training's government-funded Cyber security course is your route into one of tech's fastest-growing fields. Learn threat intelligence, security testing and incident response in an interactive online format and earn a nationally recognised NCFE Level 3 Certificate in Cyber Security Practices. Course details Duration: 14 weeks Format: Online, practical workshops Schedule: Mon-Thu 6pm-9pm Start date: 14th September 2026 (suggested - see flag above) Spaces: Limited to 35 learners per cohort What you'll learn Applying cyber security principles and risk assessment Gathering threat intelligence, including open source intelligence (OSINT) Carrying out security testing and identifying vulnerabilities Planning incident response and writing post-incident reports Potential roles this training could lead to Information Security Analyst Incident Responder Analyst Junior Forensic Analyst Entry Level Compliance Specialist Additional benefits High-impact employability workshops Six months' access to online employability courses Ongoing career support Eligibility Live in Hertfordshire Be aged 19 or over Earn below the gross annual wage cap of TBC Not currently be undertaking any other government funded training Not be in the UK on a student, graduate, postgraduate or sponsorship visa, or as a dependent of someone who is Cost This is a free government funded course Potential roles this training could lead to IT Systems Administrator Technical Support Technician Entry Level IT Technician Helpdesk Analyst Additional benefits High-impact employability workshops Six months' access to online employability courses Ongoing career support Eligibility Live in Hertfordshire Be aged 19 or over Not currently be undertaking any other government funded training Not be in the UK on a student, graduate, postgraduate or sponsorship visa, or as a dependent of someone who is Cost This is a free government funded course
FMG RS in Bournemouth is seeking a qualified IMI MET Technician to join our busy workshop. The role offers an hourly rate up to £24, plus uncapped bonus and a comprehensive benefits package. Experience in MET repair, body repair or similar is ideal and a UK driving licence is required. Join the UK's largest repair group and benefit from generous holiday entitlement, pension, life assurance, vehicle-leasing schemes and wellbeing services.
Aug 30, 2026
Full time
FMG RS in Bournemouth is seeking a qualified IMI MET Technician to join our busy workshop. The role offers an hourly rate up to £24, plus uncapped bonus and a comprehensive benefits package. Experience in MET repair, body repair or similar is ideal and a UK driving licence is required. Join the UK's largest repair group and benefit from generous holiday entitlement, pension, life assurance, vehicle-leasing schemes and wellbeing services.
We are recruiting on behalf of a well-established engineering company seeking an experienced Hydraulic Fitter to join their growing team. This is an excellent opportunity for a skilled mechanical professional who enjoys working with hydraulic systems, fault finding, assembly, maintenance, and repairs across a range of industrial equipment and machinery. The successful candidate will be responsible for building, installing, servicing, and repairing hydraulic components while ensuring all work is completed safely, efficiently, and to a high standard. Key Responsibilities Assemble, install, and commission hydraulic systems and components. Diagnose hydraulic and mechanical faults using appropriate testing equipment. Repair and replace hydraulic cylinders, pumps, valves, motors, hoses, and associated components. Read and interpret hydraulic schematics, engineering drawings, and technical manuals. Conduct preventative maintenance and planned servicing on hydraulic equipment. Pressure test hydraulic systems to ensure safe and reliable operation. Ensure all work complies with health and safety regulations and company procedures. Complete service reports, maintenance records, and job documentation accurately. Work collaboratively with engineers, technicians, and production teams to minimise downtime. Identify opportunities for process improvements and report recurring equipment issues. Skills & Experience Essential Previous experience working as a Hydraulic Fitter, Mechanical Fitter, Plant Fitter, or similar role. Strong understanding of hydraulic systems and components. Ability to interpret hydraulic circuit diagrams and engineering drawings. Experience with hydraulic fault diagnosis and repair. Competent in the use of hand tools, power tools, and workshop equipment. Strong mechanical aptitude and problem-solving skills. Ability to work independently and as part of a team. Full UK driving licence (if field-based).
Aug 30, 2026
Full time
We are recruiting on behalf of a well-established engineering company seeking an experienced Hydraulic Fitter to join their growing team. This is an excellent opportunity for a skilled mechanical professional who enjoys working with hydraulic systems, fault finding, assembly, maintenance, and repairs across a range of industrial equipment and machinery. The successful candidate will be responsible for building, installing, servicing, and repairing hydraulic components while ensuring all work is completed safely, efficiently, and to a high standard. Key Responsibilities Assemble, install, and commission hydraulic systems and components. Diagnose hydraulic and mechanical faults using appropriate testing equipment. Repair and replace hydraulic cylinders, pumps, valves, motors, hoses, and associated components. Read and interpret hydraulic schematics, engineering drawings, and technical manuals. Conduct preventative maintenance and planned servicing on hydraulic equipment. Pressure test hydraulic systems to ensure safe and reliable operation. Ensure all work complies with health and safety regulations and company procedures. Complete service reports, maintenance records, and job documentation accurately. Work collaboratively with engineers, technicians, and production teams to minimise downtime. Identify opportunities for process improvements and report recurring equipment issues. Skills & Experience Essential Previous experience working as a Hydraulic Fitter, Mechanical Fitter, Plant Fitter, or similar role. Strong understanding of hydraulic systems and components. Ability to interpret hydraulic circuit diagrams and engineering drawings. Experience with hydraulic fault diagnosis and repair. Competent in the use of hand tools, power tools, and workshop equipment. Strong mechanical aptitude and problem-solving skills. Ability to work independently and as part of a team. Full UK driving licence (if field-based).
Workshop Engineer role in Tamworth is a full-time, permanent position within a leading plant hire and equipment rental business. You will diagnose, service, and repair heavy plant and construction equipment in a modern workshop, working to high standards. We're seeking a proactive technician with strong fault-finding skills, the ability to work independently or as part of a team, and a commitment to safety. Ongoing manufacturer training and clear career progression are provided.
Aug 30, 2026
Full time
Workshop Engineer role in Tamworth is a full-time, permanent position within a leading plant hire and equipment rental business. You will diagnose, service, and repair heavy plant and construction equipment in a modern workshop, working to high standards. We're seeking a proactive technician with strong fault-finding skills, the ability to work independently or as part of a team, and a commitment to safety. Ongoing manufacturer training and clear career progression are provided.
Mechanical Assembly Technician Location: Slough Salary: 27,000- 28,000 per annum (depending on experience) Job Type: Full-time, Permanent Working Hours: Monday to Friday,8.00am-4.30pm About Trekinetic Our client is a leading manufacturer going through a period of extensive growth, as a result we are looking for an experienced Mechanical Assembly Technician to join their production team on a permanent basis. The Role This is a hands-on workshop-based role where you will be responsible for assembling, servicing and repairing products to the highest standards. You will work as part of a small, friendly team, helping to ensure every product leaving our workshop meets our quality expectations. The role offers variety, with responsibilities ranging from new product assembly through to servicing customer equipment and supporting continuous improvements within production. Full product training will be provided, but previous mechanical assembly experience is essential. Key Responsibilities Assemble units from component level to completed product. Carry out servicing, maintenance and repairs on returned products. Read and follow assembly drawings, work instructions and production documentation. Use a variety of hand tools, power tools and workshop equipment safely and effectively. Inspect completed assemblies to ensure they meet quality standards and specifications. Diagnose mechanical faults and carry out repairs where required. Work closely with colleagues to meet production schedules and delivery deadlines. Maintain a clean, organised and safe working environment. Contribute ideas for improving assembly methods, quality and efficiency. Follow company quality procedures and support our ISO 9001 quality management system. About You We're looking for someone who enjoys practical, hands-on work and takes pride in producing high-quality products. You should have: Previous experience in a mechanical assembly or manufacturing role. A good understanding of mechanical components and assembly techniques. Confidence using hand tools, power tools and general workshop equipment. Strong attention to detail and a commitment to producing work of a consistently high standard. A practical and methodical approach to problem solving. The ability to work independently as well as part of a small production team. Good organisational skills and the ability to manage your workload effectively. A positive attitude, reliability and a willingness to learn. Additional Info Starting salary of 27,000- 28,000 per year , depending on experience. Permanent, full-time employment. 28 days annual leave including bank holidays. An additional day's holiday for each completed year of service, up to a maximum of 5 extra days. Workplace pension scheme. Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Aug 30, 2026
Full time
Mechanical Assembly Technician Location: Slough Salary: 27,000- 28,000 per annum (depending on experience) Job Type: Full-time, Permanent Working Hours: Monday to Friday,8.00am-4.30pm About Trekinetic Our client is a leading manufacturer going through a period of extensive growth, as a result we are looking for an experienced Mechanical Assembly Technician to join their production team on a permanent basis. The Role This is a hands-on workshop-based role where you will be responsible for assembling, servicing and repairing products to the highest standards. You will work as part of a small, friendly team, helping to ensure every product leaving our workshop meets our quality expectations. The role offers variety, with responsibilities ranging from new product assembly through to servicing customer equipment and supporting continuous improvements within production. Full product training will be provided, but previous mechanical assembly experience is essential. Key Responsibilities Assemble units from component level to completed product. Carry out servicing, maintenance and repairs on returned products. Read and follow assembly drawings, work instructions and production documentation. Use a variety of hand tools, power tools and workshop equipment safely and effectively. Inspect completed assemblies to ensure they meet quality standards and specifications. Diagnose mechanical faults and carry out repairs where required. Work closely with colleagues to meet production schedules and delivery deadlines. Maintain a clean, organised and safe working environment. Contribute ideas for improving assembly methods, quality and efficiency. Follow company quality procedures and support our ISO 9001 quality management system. About You We're looking for someone who enjoys practical, hands-on work and takes pride in producing high-quality products. You should have: Previous experience in a mechanical assembly or manufacturing role. A good understanding of mechanical components and assembly techniques. Confidence using hand tools, power tools and general workshop equipment. Strong attention to detail and a commitment to producing work of a consistently high standard. A practical and methodical approach to problem solving. The ability to work independently as well as part of a small production team. Good organisational skills and the ability to manage your workload effectively. A positive attitude, reliability and a willingness to learn. Additional Info Starting salary of 27,000- 28,000 per year , depending on experience. Permanent, full-time employment. 28 days annual leave including bank holidays. An additional day's holiday for each completed year of service, up to a maximum of 5 extra days. Workplace pension scheme. Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Career Area: Operations Job Description: Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Job Title: Iron Technician - Trainee to Experienced Level Salary : £24,526 - £31,375 depending on experience Location Aberdeen, Scotland Benefits: 29 days annual leave plus 4 public holidays, Contributory pension scheme - Caterpillar will double the employee's contribution Up to 10% Contributory share scheme - Caterpillar will match 50% of the employee's contribution. Annual Bonus of up to 8% Optional flexible benefits including access to health and dental care plans, EV car lease, holiday purchase. About SPM Oil & Gas SPM Oil & Gas, a Caterpillar company, provides superior products and service solutions to make our customers more efficient and lower total cost of ownership. Globally, we deliver engineered oilfield and drilling equipment repair and certification, mechanical and rotating equipment repairs and upgrades, rapid prototyping of spare parts, robust asset management, operation and maintenance and field engineering services. We offer a wide range of career opportunities across a variety of technical and business roles in engineering and service locations worldwide. Join our team and help build engineering solutions that change the industry. Job Summary We are looking for motivated people to join our Aberdeen Service Centre as Iron Technicians. This opportunity is open to candidates at different stages of their career, from those with no previous oil and gas or workshop experience who are keen to learn, through to experienced technicians. You will work as part of a skilled team supporting SPM Oil & Gas work scopes under the direction of the Workshop Supervisor(s), with training, coaching and progression based on your existing skills, experience and performance. What You Will Do: Depending on your experience, your responsibilities may include learning the fundamentals of iron equipment maintenance, supporting experienced technicians, or independently carrying out more advanced inspection, servicing and repair activities. For trainee or early-career candidates, learn and develop the core skills required to become a competent Iron Technician while also undertaking general yard duties and spray painting. For experienced candidates, apply existing knowledge of flowline equipment, inspection standards and workshop practices to support high-quality delivery. Strip down, service, repair and inspect flowline equipment, appropriate to your training and experience level. Carry out gauge, MPI wall thickness inspections and pressure testing of equipment to SPM or customer standards once trained and authorised to do so. Complete rental loadouts from Iron Request Forms. Recording of serial numbers and scheduling of inspections within Asset Management Program (AMP). Use of SPM RFID system to check-in and identify assets. For experienced candidates, lead teams when completing rental/refurbishment job, giving updates to supervisors and service team. Lead jobs on customer jobs offshore or onsite at customer locations overseas, representing the company in a professional manner. For experienced candidates, mentor/buddy less experienced technicians and assist with their training. Complete required training, which may include Forklift, Gantry Crane and Abrasive Wheels training. What You Have: We welcome applications from candidates who are new to this type of work and can demonstrate the right attitude, commitment to safety and willingness to learn. We also welcome applications from candidates with relevant mechanical, workshop, oilfield or iron equipment experience. Top Candidates may have: You do not need to meet every point listed below to apply. We are interested in hearing from people with the potential to develop, as well as those who can bring established technical experience to the team. Mechanical aptitude, practical workshop experience or established mechanical knowledge. Good communication skills and the ability to stay organised in a busy workshop environment. An enthusiastic, proactive and flexible approach to work. A willingness to learn, take feedback and build confidence, or the ability to work independently with minimal supervision where experience allows. A commitment to high-quality work, agreed targets and safe working practices. The ability to manage time, prioritise workload and work effectively under pressure. A positive team mindset and willingness to support others. An interest in continuous improvement and finding better ways of working. Additional Notes This role is based at the Aberdeen Service Centre in Portlethen 5 days per week. There may also be a requirement to mobilise to client jobs at offshore or onshore overseas client locations on an ad hoc basis. This work is not guaranteed and will depend on business and customer requirements. For experienced candidates, previous offshore experience would be beneficial. About Caterpillar Caterpillar Inc. is the world's leading manufacturer of construction and mining equipment, off-highway diesel and natural gas engines, industrial gas turbines and diesel-electric locomotives. For nearly 100 years, we've been helping customers build a better, more sustainable world and are committed and contributing to a reduced-carbon future. Our innovative products and services, backed by our global dealer network, provide exceptional value that helps customers succeed. NB. The panel cannot make assumptions when shortlisting therefore please demonstrate your qualifications and experience on your CV relevant to the criteria outlined. Pending the number of applications, the criteria for the position may be enhanced to facilitate shortlisting. Caterpillar is an Equal Opportunity Employer. Qualified applicants of any age are encouraged to apply
Aug 30, 2026
Full time
Career Area: Operations Job Description: Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. Job Title: Iron Technician - Trainee to Experienced Level Salary : £24,526 - £31,375 depending on experience Location Aberdeen, Scotland Benefits: 29 days annual leave plus 4 public holidays, Contributory pension scheme - Caterpillar will double the employee's contribution Up to 10% Contributory share scheme - Caterpillar will match 50% of the employee's contribution. Annual Bonus of up to 8% Optional flexible benefits including access to health and dental care plans, EV car lease, holiday purchase. About SPM Oil & Gas SPM Oil & Gas, a Caterpillar company, provides superior products and service solutions to make our customers more efficient and lower total cost of ownership. Globally, we deliver engineered oilfield and drilling equipment repair and certification, mechanical and rotating equipment repairs and upgrades, rapid prototyping of spare parts, robust asset management, operation and maintenance and field engineering services. We offer a wide range of career opportunities across a variety of technical and business roles in engineering and service locations worldwide. Join our team and help build engineering solutions that change the industry. Job Summary We are looking for motivated people to join our Aberdeen Service Centre as Iron Technicians. This opportunity is open to candidates at different stages of their career, from those with no previous oil and gas or workshop experience who are keen to learn, through to experienced technicians. You will work as part of a skilled team supporting SPM Oil & Gas work scopes under the direction of the Workshop Supervisor(s), with training, coaching and progression based on your existing skills, experience and performance. What You Will Do: Depending on your experience, your responsibilities may include learning the fundamentals of iron equipment maintenance, supporting experienced technicians, or independently carrying out more advanced inspection, servicing and repair activities. For trainee or early-career candidates, learn and develop the core skills required to become a competent Iron Technician while also undertaking general yard duties and spray painting. For experienced candidates, apply existing knowledge of flowline equipment, inspection standards and workshop practices to support high-quality delivery. Strip down, service, repair and inspect flowline equipment, appropriate to your training and experience level. Carry out gauge, MPI wall thickness inspections and pressure testing of equipment to SPM or customer standards once trained and authorised to do so. Complete rental loadouts from Iron Request Forms. Recording of serial numbers and scheduling of inspections within Asset Management Program (AMP). Use of SPM RFID system to check-in and identify assets. For experienced candidates, lead teams when completing rental/refurbishment job, giving updates to supervisors and service team. Lead jobs on customer jobs offshore or onsite at customer locations overseas, representing the company in a professional manner. For experienced candidates, mentor/buddy less experienced technicians and assist with their training. Complete required training, which may include Forklift, Gantry Crane and Abrasive Wheels training. What You Have: We welcome applications from candidates who are new to this type of work and can demonstrate the right attitude, commitment to safety and willingness to learn. We also welcome applications from candidates with relevant mechanical, workshop, oilfield or iron equipment experience. Top Candidates may have: You do not need to meet every point listed below to apply. We are interested in hearing from people with the potential to develop, as well as those who can bring established technical experience to the team. Mechanical aptitude, practical workshop experience or established mechanical knowledge. Good communication skills and the ability to stay organised in a busy workshop environment. An enthusiastic, proactive and flexible approach to work. A willingness to learn, take feedback and build confidence, or the ability to work independently with minimal supervision where experience allows. A commitment to high-quality work, agreed targets and safe working practices. The ability to manage time, prioritise workload and work effectively under pressure. A positive team mindset and willingness to support others. An interest in continuous improvement and finding better ways of working. Additional Notes This role is based at the Aberdeen Service Centre in Portlethen 5 days per week. There may also be a requirement to mobilise to client jobs at offshore or onshore overseas client locations on an ad hoc basis. This work is not guaranteed and will depend on business and customer requirements. For experienced candidates, previous offshore experience would be beneficial. About Caterpillar Caterpillar Inc. is the world's leading manufacturer of construction and mining equipment, off-highway diesel and natural gas engines, industrial gas turbines and diesel-electric locomotives. For nearly 100 years, we've been helping customers build a better, more sustainable world and are committed and contributing to a reduced-carbon future. Our innovative products and services, backed by our global dealer network, provide exceptional value that helps customers succeed. NB. The panel cannot make assumptions when shortlisting therefore please demonstrate your qualifications and experience on your CV relevant to the criteria outlined. Pending the number of applications, the criteria for the position may be enhanced to facilitate shortlisting. Caterpillar is an Equal Opportunity Employer. Qualified applicants of any age are encouraged to apply
An exciting opportunity has arisen to join our dedicated team at Agricar Ltd. We're looking for an Agricultural Service Technician to join our busy Stirling depot. If you're enthusiastic, motivated, and take pride in delivering quality service, this is a great chance to develop your career within a well-established and successful agricultural dealership. We offer a competitive salary, overtime, and a comprehensive benefits package, along with ongoing manufacturer training to keep your skills and knowledge up to date. About the Role You'll be responsible for carrying out diagnostics, repairs, and servicing on a wide range of agricultural machinery both in the workshop and out on customer sites. You'll work closely with our existing service team, providing technical support and maintaining the high standard of service our customers expect from Agricar, New Holland and Case IH.
Aug 30, 2026
Full time
An exciting opportunity has arisen to join our dedicated team at Agricar Ltd. We're looking for an Agricultural Service Technician to join our busy Stirling depot. If you're enthusiastic, motivated, and take pride in delivering quality service, this is a great chance to develop your career within a well-established and successful agricultural dealership. We offer a competitive salary, overtime, and a comprehensive benefits package, along with ongoing manufacturer training to keep your skills and knowledge up to date. About the Role You'll be responsible for carrying out diagnostics, repairs, and servicing on a wide range of agricultural machinery both in the workshop and out on customer sites. You'll work closely with our existing service team, providing technical support and maintaining the high standard of service our customers expect from Agricar, New Holland and Case IH.
Maintenance Technician Overview We are currently recruiting for an experienced Maintenance Technician to join a well-established manufacturing company. This is a fantastic opportunity to become part of a busy engineering team responsible for ensuring the smooth operation of production machinery and site equipment through planned preventative maintenance and rapid response to equipment breakdowns. The successful candidate will play a key role in minimising downtime, improving equipment reliability and supporting continuous improvement initiatives within a fast-paced manufacturing environment. Key Responsibilities Carry out planned preventative maintenance (PPM) on a wide range of manufacturing machinery and production equipment. Diagnose and repair mechanical, electrical and pneumatic faults to minimise production downtime. Respond promptly to equipment breakdowns and carry out effective fault finding and repairs. Install, commission and test new machinery and equipment where required. Perform routine inspections to identify potential issues before they result in equipment failure. Maintain conveyors, motors, pumps, gearboxes, bearings, pneumatic systems, hydraulic equipment and other production machinery. Read and interpret engineering drawings, electrical schematics and technical manuals. Record all maintenance activities accurately using maintenance logs or a computerised maintenance management system (CMMS). Liaise closely with production teams to prioritise maintenance activities and ensure minimal disruption to manufacturing operations. Support continuous improvement projects aimed at increasing machine efficiency and reducing downtime. Ensure all maintenance work is completed safely and in accordance with company procedures and health and safety legislation. Maintain high housekeeping standards within the workshop and production areas. Assist with root cause analysis following recurring equipment failures and recommend long-term solutions. Participate in machinery upgrades, modifications and factory improvement projects as required. Skills and Experience Previous experience working as a Maintenance Technician, Maintenance Engineer or Multi-skilled Engineer within a manufacturing or production environment. Strong mechanical maintenance experience with good electrical fault-finding skills. Experience maintaining industrial manufacturing machinery. Knowledge of hydraulic, pneumatic and mechanical systems. Ability to diagnose faults quickly and carry out effective repairs. Comfortable working independently and as part of a maintenance team. Good understanding of health and safety regulations within an industrial environment. Strong problem-solving skills with a proactive approach to preventative maintenance. Good communication skills and the ability to work closely with production teams. Flexible approach to working rotating shifts. Desirable Qualifications Engineering Apprenticeship or NVQ Level 3 (or equivalent) in Mechanical or Electrical Engineering. 18th Edition Wiring Regulations (desirable). PLC fault-finding experience. Experience using CMMS maintenance systems. Forklift licence (desirable). Working Hours This role operates on a rotating weekly shift pattern: Week 1: Monday to Friday, 6.00am to 2.00pm Week 2: Monday to Friday, 2.00pm to 10.00pm The shift pattern alternates weekly. Salary and Benefits Competitive hourly rate or salary depending on experience. Overtime opportunities available. Holiday entitlement. Company pension scheme. Full training and ongoing development opportunities. Long-term career progression within a growing manufacturing business. Free onsite parking. Company workwear and PPE provided. Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Aug 30, 2026
Full time
Maintenance Technician Overview We are currently recruiting for an experienced Maintenance Technician to join a well-established manufacturing company. This is a fantastic opportunity to become part of a busy engineering team responsible for ensuring the smooth operation of production machinery and site equipment through planned preventative maintenance and rapid response to equipment breakdowns. The successful candidate will play a key role in minimising downtime, improving equipment reliability and supporting continuous improvement initiatives within a fast-paced manufacturing environment. Key Responsibilities Carry out planned preventative maintenance (PPM) on a wide range of manufacturing machinery and production equipment. Diagnose and repair mechanical, electrical and pneumatic faults to minimise production downtime. Respond promptly to equipment breakdowns and carry out effective fault finding and repairs. Install, commission and test new machinery and equipment where required. Perform routine inspections to identify potential issues before they result in equipment failure. Maintain conveyors, motors, pumps, gearboxes, bearings, pneumatic systems, hydraulic equipment and other production machinery. Read and interpret engineering drawings, electrical schematics and technical manuals. Record all maintenance activities accurately using maintenance logs or a computerised maintenance management system (CMMS). Liaise closely with production teams to prioritise maintenance activities and ensure minimal disruption to manufacturing operations. Support continuous improvement projects aimed at increasing machine efficiency and reducing downtime. Ensure all maintenance work is completed safely and in accordance with company procedures and health and safety legislation. Maintain high housekeeping standards within the workshop and production areas. Assist with root cause analysis following recurring equipment failures and recommend long-term solutions. Participate in machinery upgrades, modifications and factory improvement projects as required. Skills and Experience Previous experience working as a Maintenance Technician, Maintenance Engineer or Multi-skilled Engineer within a manufacturing or production environment. Strong mechanical maintenance experience with good electrical fault-finding skills. Experience maintaining industrial manufacturing machinery. Knowledge of hydraulic, pneumatic and mechanical systems. Ability to diagnose faults quickly and carry out effective repairs. Comfortable working independently and as part of a maintenance team. Good understanding of health and safety regulations within an industrial environment. Strong problem-solving skills with a proactive approach to preventative maintenance. Good communication skills and the ability to work closely with production teams. Flexible approach to working rotating shifts. Desirable Qualifications Engineering Apprenticeship or NVQ Level 3 (or equivalent) in Mechanical or Electrical Engineering. 18th Edition Wiring Regulations (desirable). PLC fault-finding experience. Experience using CMMS maintenance systems. Forklift licence (desirable). Working Hours This role operates on a rotating weekly shift pattern: Week 1: Monday to Friday, 6.00am to 2.00pm Week 2: Monday to Friday, 2.00pm to 10.00pm The shift pattern alternates weekly. Salary and Benefits Competitive hourly rate or salary depending on experience. Overtime opportunities available. Holiday entitlement. Company pension scheme. Full training and ongoing development opportunities. Long-term career progression within a growing manufacturing business. Free onsite parking. Company workwear and PPE provided. Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Hertfordshire County Council
Hertford, Hertfordshire
About the team This is an exciting opportunity to Join Hertfordshire Fire and Rescue Service's - Technical Services - Operational Support department. Operational Support is a key area of Hertfordshire Fire and Rescue's Technical Services department. They hold the responsibility for servicing, maintaining, and repairing a wide variety of firefighting and rescue equipment alongside breathing apparatus and ancillary equipment to enable front line crews to provide an effective operational response. This is a rewarding role and an opportunity to be part of a prestigious public serving organisation renowned for excellence. If this sounds like an opportunity for you to serve our community we would love to hear from you! About the role This is a fast paced and often reactive environment, dependant on operational incidents, therefore you'll need to be able to work under pressure, be able to work as part of a team and be extremely well organised, taking a pro-active approach to your workload. Typically, you will be: Ensuring that HFRS operational equipment is inspected & serviced at the correct intervals and is fit for operational use. Using computerised systems for maintaining records of all equipment inspections, tracking, tracing and managing of assets. Servicing, maintaining and repairing HFRS equipment both at Operational Support Workshop's and other locations as necessary i.e. fire stations. The movement, transport and carrying of equipment, as required, within the area covered by HFRS. Full training will be provided on our specialist equipment and systems; however, we are looking for candidates who already have a good understanding of workshop environments and practical repair work. A proactive approach, attention to detail, and a commitment to safe working practices are essential. About you Essential: Full UK driving licence. Ability to achieve and maintain the required competency certifications to inspect, service, repair and maintain a range of risk-critical Fire and Rescue Service equipment following appointment. Desirable: (Training and development opportunities will be provided for candidates who do not currently hold these competencies). Experience in the operation, inspection, servicing or maintenance of Self-Contained Breathing Apparatus (SCBA), Fire and Rescue Service ladders, and combustion powered portable pumps. LGV (Large Goods Vehicles) driving licence.
Aug 30, 2026
Full time
About the team This is an exciting opportunity to Join Hertfordshire Fire and Rescue Service's - Technical Services - Operational Support department. Operational Support is a key area of Hertfordshire Fire and Rescue's Technical Services department. They hold the responsibility for servicing, maintaining, and repairing a wide variety of firefighting and rescue equipment alongside breathing apparatus and ancillary equipment to enable front line crews to provide an effective operational response. This is a rewarding role and an opportunity to be part of a prestigious public serving organisation renowned for excellence. If this sounds like an opportunity for you to serve our community we would love to hear from you! About the role This is a fast paced and often reactive environment, dependant on operational incidents, therefore you'll need to be able to work under pressure, be able to work as part of a team and be extremely well organised, taking a pro-active approach to your workload. Typically, you will be: Ensuring that HFRS operational equipment is inspected & serviced at the correct intervals and is fit for operational use. Using computerised systems for maintaining records of all equipment inspections, tracking, tracing and managing of assets. Servicing, maintaining and repairing HFRS equipment both at Operational Support Workshop's and other locations as necessary i.e. fire stations. The movement, transport and carrying of equipment, as required, within the area covered by HFRS. Full training will be provided on our specialist equipment and systems; however, we are looking for candidates who already have a good understanding of workshop environments and practical repair work. A proactive approach, attention to detail, and a commitment to safe working practices are essential. About you Essential: Full UK driving licence. Ability to achieve and maintain the required competency certifications to inspect, service, repair and maintain a range of risk-critical Fire and Rescue Service equipment following appointment. Desirable: (Training and development opportunities will be provided for candidates who do not currently hold these competencies). Experience in the operation, inspection, servicing or maintenance of Self-Contained Breathing Apparatus (SCBA), Fire and Rescue Service ladders, and combustion powered portable pumps. LGV (Large Goods Vehicles) driving licence.
Spray Painter / Spray Finishing Technician - Bespoke Joinery Salary: 32,000- 40,000 per annum, depending on experience Hours: Monday to Friday, Full-time Employment Type: Permanent About the Role A well-established bespoke joinery manufacturer is looking for an experienced Spray Painter / Spray Finishing Technician to join its production team. This is a skilled, hands-on role responsible for delivering high-quality spray finishes across a range of bespoke joinery and furniture components. The role combines traditional spray finishing skills with the operation and monitoring of automated spray finishing equipment. You will work closely with the Spray Shop Manager and wider production team, taking responsibility for paint preparation, spray application, colour consistency, quality control and the efficient running of the spray finishing process. The ideal candidate will have strong technical knowledge of spray finishing and coating systems, excellent attention to detail and experience working within a professional joinery, furniture or cabinetry environment. Key Responsibilities Spray Finishing Apply primers, sealers, base coats, lacquers and specialist coatings. Use conventional, HVLP and air-assisted airless spray equipment. Produce high-quality finishes on MDF, solid timber, veneers, laminates and other substrates. Maintain consistent colour, sheen and finish quality. Monitor coating thickness, flash-off times, curing and drying processes. Carry out polishing and finishing work where required. Identify and rectify spray-finishing defects. Automated Spray Line Operate and monitor automated spray finishing equipment. Set up production runs and adjust machine settings as required. Monitor application quality and make adjustments to maintain consistent results. Carry out routine operational checks and basic preventative maintenance. Identify potential improvements to increase productivity and reduce downtime. Report technical faults and assist external engineers with servicing and repairs. Paint Preparation & Colour Control Accurately mix paints, coatings, catalysts, hardeners and thinners in accordance with technical specifications. Carry out colour matching and maintain colour consistency across production. Monitor paint and coating stock levels. Minimise material waste through efficient preparation and application. Ensure coatings are stored and handled safely and correctly. Quality Control Inspect components before, during and after spraying. Identify defects such as runs, contamination, sinkage, orange peel and colour inconsistencies. Rectify finishing defects where required. Ensure completed work meets the required quality standards before release. Investigate recurring quality issues and contribute to corrective actions. Equipment & Maintenance Set up, clean and maintain spray guns, pumps, pressure pots and associated equipment. Keep spray booths, drying areas and automated equipment clean and operational. Carry out daily equipment checks. Report faults and maintenance requirements promptly. Support planned maintenance activities. Production & Teamwork Work closely with the preparation team to ensure components are ready for spraying. Prioritise workloads in line with production schedules. Maintain accurate production records and component traceability. Work collaboratively with production and workshop teams. Share technical knowledge and support the development of less experienced colleagues. Contribute ideas to improve spray finishing processes, productivity and quality. Requirements Extensive experience as a Spray Painter, Spray Finisher or similar within joinery, furniture, cabinetry or a related manufacturing environment. Strong knowledge of professional spray-finishing techniques. Experience with MDF, solid timber, veneers and other joinery substrates. Knowledge of polyurethane, acrylic, water-based and specialist coating systems. Experience using conventional, HVLP and/or air-assisted airless spray systems. Experience operating automated spray lines or industrial finishing equipment would be highly advantageous. Strong understanding of colour matching and coating technology. Good mechanical aptitude and ability to troubleshoot spray equipment. Excellent attention to detail. Ability to work to production deadlines without compromising quality. Strong communication and teamwork skills. Reliable, organised and proactive approach to work. The Ideal Candidate The successful candidate will be technically minded, quality focused and hands-on, with a genuine pride in producing exceptional finishes. You should be comfortable working in a fast-paced production environment and able to balance quality, productivity and efficiency. Experience within high-end bespoke joinery, furniture manufacturing or cabinetry would be particularly advantageous. Streamline Search is a technical recruitment agency based in Chichester, West Sussex operating across the United Kingdom. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application.
Aug 30, 2026
Full time
Spray Painter / Spray Finishing Technician - Bespoke Joinery Salary: 32,000- 40,000 per annum, depending on experience Hours: Monday to Friday, Full-time Employment Type: Permanent About the Role A well-established bespoke joinery manufacturer is looking for an experienced Spray Painter / Spray Finishing Technician to join its production team. This is a skilled, hands-on role responsible for delivering high-quality spray finishes across a range of bespoke joinery and furniture components. The role combines traditional spray finishing skills with the operation and monitoring of automated spray finishing equipment. You will work closely with the Spray Shop Manager and wider production team, taking responsibility for paint preparation, spray application, colour consistency, quality control and the efficient running of the spray finishing process. The ideal candidate will have strong technical knowledge of spray finishing and coating systems, excellent attention to detail and experience working within a professional joinery, furniture or cabinetry environment. Key Responsibilities Spray Finishing Apply primers, sealers, base coats, lacquers and specialist coatings. Use conventional, HVLP and air-assisted airless spray equipment. Produce high-quality finishes on MDF, solid timber, veneers, laminates and other substrates. Maintain consistent colour, sheen and finish quality. Monitor coating thickness, flash-off times, curing and drying processes. Carry out polishing and finishing work where required. Identify and rectify spray-finishing defects. Automated Spray Line Operate and monitor automated spray finishing equipment. Set up production runs and adjust machine settings as required. Monitor application quality and make adjustments to maintain consistent results. Carry out routine operational checks and basic preventative maintenance. Identify potential improvements to increase productivity and reduce downtime. Report technical faults and assist external engineers with servicing and repairs. Paint Preparation & Colour Control Accurately mix paints, coatings, catalysts, hardeners and thinners in accordance with technical specifications. Carry out colour matching and maintain colour consistency across production. Monitor paint and coating stock levels. Minimise material waste through efficient preparation and application. Ensure coatings are stored and handled safely and correctly. Quality Control Inspect components before, during and after spraying. Identify defects such as runs, contamination, sinkage, orange peel and colour inconsistencies. Rectify finishing defects where required. Ensure completed work meets the required quality standards before release. Investigate recurring quality issues and contribute to corrective actions. Equipment & Maintenance Set up, clean and maintain spray guns, pumps, pressure pots and associated equipment. Keep spray booths, drying areas and automated equipment clean and operational. Carry out daily equipment checks. Report faults and maintenance requirements promptly. Support planned maintenance activities. Production & Teamwork Work closely with the preparation team to ensure components are ready for spraying. Prioritise workloads in line with production schedules. Maintain accurate production records and component traceability. Work collaboratively with production and workshop teams. Share technical knowledge and support the development of less experienced colleagues. Contribute ideas to improve spray finishing processes, productivity and quality. Requirements Extensive experience as a Spray Painter, Spray Finisher or similar within joinery, furniture, cabinetry or a related manufacturing environment. Strong knowledge of professional spray-finishing techniques. Experience with MDF, solid timber, veneers and other joinery substrates. Knowledge of polyurethane, acrylic, water-based and specialist coating systems. Experience using conventional, HVLP and/or air-assisted airless spray systems. Experience operating automated spray lines or industrial finishing equipment would be highly advantageous. Strong understanding of colour matching and coating technology. Good mechanical aptitude and ability to troubleshoot spray equipment. Excellent attention to detail. Ability to work to production deadlines without compromising quality. Strong communication and teamwork skills. Reliable, organised and proactive approach to work. The Ideal Candidate The successful candidate will be technically minded, quality focused and hands-on, with a genuine pride in producing exceptional finishes. You should be comfortable working in a fast-paced production environment and able to balance quality, productivity and efficiency. Experience within high-end bespoke joinery, furniture manufacturing or cabinetry would be particularly advantageous. Streamline Search is a technical recruitment agency based in Chichester, West Sussex operating across the United Kingdom. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application.
Fleet Control Senior Monday to Friday - days As a Fleet Control Senior, you will be overseeing a busy maintenance control department and ensuring KPI s are met with your team. Your day to day role will see you with a headset on. Talking technical issues with a host of core garages and services providers, then this role could be for you. This is a role where you will be providing a first class support over the phone to the companies fleet of vehicles. The fleet is a diverse one that will include HGV s, Vans (LCV), Refuse Vehicles, Gritters, Sweepers, Light Commercials and Mini Buses. No 2 days will ever be the same in this exciting post. Your role will be varied including Supervising and mentoring a small team of Controllers Scheduling repairs, inspections and booking visits for the Field Engineers. FNOL First notice of Loss situations Chasing progress with a network of your own core garages and a chosen network of 3rd party maintenance providers. Logging repair and maintenance notifications Ensuring the field service team have a maximum utilisation. Maintaining updates on stock/ parts and ensuring correct levels You will be chasing up recoveries as a consequence of breakdowns & accidents. You will also be chasing up repair providers to analyse and action defects. What is important is that you have an idea on repair costs and you are not afraid to challenge repair times. An understanding of what is and what isn t a warranty repair would also be useful. Understanding maintenance spend is a major part of this challenging role. If you have IT systems knowledge MS Office skills, this will also help you in this busy role. If you have technical knowledge of HGV s from a mechanical perspective, this would give you a sound platform. On a daily basis, you will be speaking with Service Managers, Workshop Controllers and Commercial Vehicle Technicians. You core remit will be to ensure that a vehicle s downtime is kept to a minimum and getting that vehicle back on the road is your primary concern. A knowledge of authorisation automotive software such as Kerridge, DMS, SAP etc this would also be useful If you are ready for the next chapter in your career, then please get in touch. If this role isn t for you but you are looking for a move, then please get in touch. Kautec Recruitment is a fast growing automotive people business that recruits the right way. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop.
Aug 30, 2026
Full time
Fleet Control Senior Monday to Friday - days As a Fleet Control Senior, you will be overseeing a busy maintenance control department and ensuring KPI s are met with your team. Your day to day role will see you with a headset on. Talking technical issues with a host of core garages and services providers, then this role could be for you. This is a role where you will be providing a first class support over the phone to the companies fleet of vehicles. The fleet is a diverse one that will include HGV s, Vans (LCV), Refuse Vehicles, Gritters, Sweepers, Light Commercials and Mini Buses. No 2 days will ever be the same in this exciting post. Your role will be varied including Supervising and mentoring a small team of Controllers Scheduling repairs, inspections and booking visits for the Field Engineers. FNOL First notice of Loss situations Chasing progress with a network of your own core garages and a chosen network of 3rd party maintenance providers. Logging repair and maintenance notifications Ensuring the field service team have a maximum utilisation. Maintaining updates on stock/ parts and ensuring correct levels You will be chasing up recoveries as a consequence of breakdowns & accidents. You will also be chasing up repair providers to analyse and action defects. What is important is that you have an idea on repair costs and you are not afraid to challenge repair times. An understanding of what is and what isn t a warranty repair would also be useful. Understanding maintenance spend is a major part of this challenging role. If you have IT systems knowledge MS Office skills, this will also help you in this busy role. If you have technical knowledge of HGV s from a mechanical perspective, this would give you a sound platform. On a daily basis, you will be speaking with Service Managers, Workshop Controllers and Commercial Vehicle Technicians. You core remit will be to ensure that a vehicle s downtime is kept to a minimum and getting that vehicle back on the road is your primary concern. A knowledge of authorisation automotive software such as Kerridge, DMS, SAP etc this would also be useful If you are ready for the next chapter in your career, then please get in touch. If this role isn t for you but you are looking for a move, then please get in touch. Kautec Recruitment is a fast growing automotive people business that recruits the right way. HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop.
Pay rate: 16ph Shift Pattern: 4 on / 4 off, 6:30am-6:30pm (initially Mon-Fri to train) Contract Duration: 6 months Location: Feltham Workshop Team Leader / Workflow Specialist (Aircraft Wheels & Brakes) If you enjoy turning workshop pace into predictable, high-quality output-and leading a team in an aviation-standard environment-this role could be your next step. You'll oversee daily workshop operations, drive turnaround performance, and ensure strict regulatory compliance across the Aircraft Wheels and Brakes workshop. What you'll be doing: Plan daily and weekly workshop tasks based on incoming asset backlogs and customer priority Streamline workflow across cleaning, NDT, machining, inspection and final assembly Drive KPIs to reduce turnaround time (TAT) and maximize output Coordinate with stores to ensure parts, repair kits and consumables are available before production begins Supervise technicians and support staff-assigning tasks, motivating the team and maintaining strong performance Enforce EHS and 5S standards across the workshop Identify skill gaps, coordinate technical training, and support technician competency sign-offs Ensure flawless completion of digital/paper maintenance release tags, teardown reports and logbooks Verify all work aligns with current Component Maintenance Manuals (CMMs) and relevant airworthiness directives Oversee calibration tracking for specialised workshop tooling (e.g., torque wrenches and inflation cages) Support internal quality teams and external aviation authority audits What you'll bring: 3-5 years of aviation MRO experience, ideally working on aircraft wheels, brakes or landing gear components 1-2 years' experience in a team leader, supervisor or production planning role (desirable) Strong working knowledge of EASA Part 145, FAA Part 145, or local CAA regulatory frameworks Experience applying Lean, Six Sigma or continuous improvement to improve workshop efficiency Proficiency with aviation ERP/MRO systems (e.g., Quantum, AMOS, SAP) and Microsoft Excel Excellent communication skills with the ability to liaise effectively with technicians and upper management Exceptional attention to detail and an uncompromising safety-and-quality mindset Ability to work in a manual workshop environment (including lifting heavy components and standing for extended periods) If you're ready to lead from the front, improve workflow and deliver high compliance standards, apply now to join our Client's workshop team in Feltham. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.
Aug 30, 2026
Seasonal
Pay rate: 16ph Shift Pattern: 4 on / 4 off, 6:30am-6:30pm (initially Mon-Fri to train) Contract Duration: 6 months Location: Feltham Workshop Team Leader / Workflow Specialist (Aircraft Wheels & Brakes) If you enjoy turning workshop pace into predictable, high-quality output-and leading a team in an aviation-standard environment-this role could be your next step. You'll oversee daily workshop operations, drive turnaround performance, and ensure strict regulatory compliance across the Aircraft Wheels and Brakes workshop. What you'll be doing: Plan daily and weekly workshop tasks based on incoming asset backlogs and customer priority Streamline workflow across cleaning, NDT, machining, inspection and final assembly Drive KPIs to reduce turnaround time (TAT) and maximize output Coordinate with stores to ensure parts, repair kits and consumables are available before production begins Supervise technicians and support staff-assigning tasks, motivating the team and maintaining strong performance Enforce EHS and 5S standards across the workshop Identify skill gaps, coordinate technical training, and support technician competency sign-offs Ensure flawless completion of digital/paper maintenance release tags, teardown reports and logbooks Verify all work aligns with current Component Maintenance Manuals (CMMs) and relevant airworthiness directives Oversee calibration tracking for specialised workshop tooling (e.g., torque wrenches and inflation cages) Support internal quality teams and external aviation authority audits What you'll bring: 3-5 years of aviation MRO experience, ideally working on aircraft wheels, brakes or landing gear components 1-2 years' experience in a team leader, supervisor or production planning role (desirable) Strong working knowledge of EASA Part 145, FAA Part 145, or local CAA regulatory frameworks Experience applying Lean, Six Sigma or continuous improvement to improve workshop efficiency Proficiency with aviation ERP/MRO systems (e.g., Quantum, AMOS, SAP) and Microsoft Excel Excellent communication skills with the ability to liaise effectively with technicians and upper management Exceptional attention to detail and an uncompromising safety-and-quality mindset Ability to work in a manual workshop environment (including lifting heavy components and standing for extended periods) If you're ready to lead from the front, improve workflow and deliver high compliance standards, apply now to join our Client's workshop team in Feltham. If you receive suspicious outreach claiming to be from us, please contact us via the ManpowerGroup website.
Vehicle Technicians, Are you looking for an opportunity to be part of a dealer group and a SPORTS brand, that can offer a GREAT SALARY and continuous support to help you achieve your career goals, ongoing training and fantastic company benefits? The Recruitment Solution are currently recruiting for experienced Motor Vehicle Technicians to join our clients' leading brand, busy state of the art workshop based in the Southend area. This is a fantastic opportunity for a qualified Vehicle Technician to work for a top performing dealership and prestige brand who offer fantastic company benefits, career development, second to none training and industry leading salary. Why Apply for this Vehicle Technician role? • Fantastic career opportunities, and an excellent salary! • State of the art resources and training • Company Pension • Performance Bonus • Company Benefits Scheme • Long Service Holiday Reward • Enhanced Family Planning Policy • Share Save Scheme • Your Birthday Off • You get to be a part of a Sports brand, who provide you with excellent support • Market leading £50,000+ OTE Vehicle Technician Requirements • Main Stream Dealership experience is preferred and you must have a minimum of 3 years' experience as a Vehicle Technician • Recognised Vehicle Maintenance Qualification - Minimum Level 3 • Full UK Licence • Must possess own tools • MOT Licence is also an advantage. To find out more about this Motor Vehicle Technician role or to apply for this vacancy you can email (url removed) quoting Motor Vehicle Technician or call the office on (phone number removed). Alternatively why not message or WhatsApp Daniel Walton directly today on (phone number removed). We have many different Motor Trade Jobs available from Service Manager, Service Team Leader, Aftersales Manager, Sales Executive, General Sales Manager, Sales Manager, Business Manager, Sales Admin, Body Shop Manager, Panel Beater, Dealer Principal, Motor Mechanic, Service Advisor, Bodyshop Estimator, Paint Sprayer, Motor Cycle Technicians & Mechanics, Vehicle Technician, Light Commercial Vehicle Technicians, HGV Fitters, Parts Advisor, Parts Manager, Workshop Controller, Trade Parts Representative, Fast Fit, Tyre Fitters, Warranty Administrator, Rental Advisor, Car Valetor, Collection & Delivery Drivers. Car Sales Executive, Car Sales person, Sales Executive, Car Sales, LCV Sales Executive, Commercial Vehicle Sales Executive, Service Advisor, Aftersales Advisor, Service Receptionist, Senior Service Advisor, Service Team Manager, Service Supervisor, STM Automotive Technician, PDI Technician, Service Technician, Senior Technician, Diagnostic Technician, Master Technician, Systems Technician, Qualified Technician, HGV Technician, LCV Technician, Heavy Goods Technician, Light Commercial Technician, Passenger Car Technician, Car Technician, Car Tech, LGV technician, Large Goods Vehicle Technician, Mechanic, HGV Fitter, Fast Fit Technician. Lots of Motor Trade Jobs throughout the UK. Call Us Now For Motor Trade Jobs, Working in Automotive Main Car Dealerships such as Mercedes, Audi, BMW, VW, Jaguar, Land Rover, Volvo, Bentley, Saab, Lexus, Toyota, Mazda, Ford, Peugeot, Renault, Citroen, Vauxhall, Nissan and many more.
Aug 30, 2026
Full time
Vehicle Technicians, Are you looking for an opportunity to be part of a dealer group and a SPORTS brand, that can offer a GREAT SALARY and continuous support to help you achieve your career goals, ongoing training and fantastic company benefits? The Recruitment Solution are currently recruiting for experienced Motor Vehicle Technicians to join our clients' leading brand, busy state of the art workshop based in the Southend area. This is a fantastic opportunity for a qualified Vehicle Technician to work for a top performing dealership and prestige brand who offer fantastic company benefits, career development, second to none training and industry leading salary. Why Apply for this Vehicle Technician role? • Fantastic career opportunities, and an excellent salary! • State of the art resources and training • Company Pension • Performance Bonus • Company Benefits Scheme • Long Service Holiday Reward • Enhanced Family Planning Policy • Share Save Scheme • Your Birthday Off • You get to be a part of a Sports brand, who provide you with excellent support • Market leading £50,000+ OTE Vehicle Technician Requirements • Main Stream Dealership experience is preferred and you must have a minimum of 3 years' experience as a Vehicle Technician • Recognised Vehicle Maintenance Qualification - Minimum Level 3 • Full UK Licence • Must possess own tools • MOT Licence is also an advantage. To find out more about this Motor Vehicle Technician role or to apply for this vacancy you can email (url removed) quoting Motor Vehicle Technician or call the office on (phone number removed). Alternatively why not message or WhatsApp Daniel Walton directly today on (phone number removed). We have many different Motor Trade Jobs available from Service Manager, Service Team Leader, Aftersales Manager, Sales Executive, General Sales Manager, Sales Manager, Business Manager, Sales Admin, Body Shop Manager, Panel Beater, Dealer Principal, Motor Mechanic, Service Advisor, Bodyshop Estimator, Paint Sprayer, Motor Cycle Technicians & Mechanics, Vehicle Technician, Light Commercial Vehicle Technicians, HGV Fitters, Parts Advisor, Parts Manager, Workshop Controller, Trade Parts Representative, Fast Fit, Tyre Fitters, Warranty Administrator, Rental Advisor, Car Valetor, Collection & Delivery Drivers. Car Sales Executive, Car Sales person, Sales Executive, Car Sales, LCV Sales Executive, Commercial Vehicle Sales Executive, Service Advisor, Aftersales Advisor, Service Receptionist, Senior Service Advisor, Service Team Manager, Service Supervisor, STM Automotive Technician, PDI Technician, Service Technician, Senior Technician, Diagnostic Technician, Master Technician, Systems Technician, Qualified Technician, HGV Technician, LCV Technician, Heavy Goods Technician, Light Commercial Technician, Passenger Car Technician, Car Technician, Car Tech, LGV technician, Large Goods Vehicle Technician, Mechanic, HGV Fitter, Fast Fit Technician. Lots of Motor Trade Jobs throughout the UK. Call Us Now For Motor Trade Jobs, Working in Automotive Main Car Dealerships such as Mercedes, Audi, BMW, VW, Jaguar, Land Rover, Volvo, Bentley, Saab, Lexus, Toyota, Mazda, Ford, Peugeot, Renault, Citroen, Vauxhall, Nissan and many more.
Weekend PDI Technician 38,640 5-Day Week (Wednesday-Sunday) Premium Workshop Looking for a stable role in a modern, professional workshop? Join one of the most forward-thinking and expanding automotive groups in the industry as a Weekend PDI Technician . Enjoy a fixed salary, consistent working hours, and a supportive team environment where your skills are valued and developed. What's in it for you? 38,640 (dependent on experience & weekend working) Fixed salary - no bonus chasing or stressful targets Wednesday-Sunday schedule (consistent midweek days off) No customer interaction - focus on the technical work you enjoy PAYE, Holiday Pay, Pension & Uniform provided Comprehensive training across all makes & models A large, growing organisation with long-term stability The Role Carry out pre-delivery inspections (PDI) to the highest standards Perform stock checking to ensure accurate records and availability Conduct periodic forecourt inspections to maintain safety and presentation Deal with on-site breakdowns to keep operations running smoothly; some Diagnostic skills are helpful Give vehicles a final check before customer test drives Work across a variety of makes & models with access to modern tools Collaborate with colleagues in a supportive, team-focused environment Why You'll Love It Here A refreshing change from high-pressure, target-driven roles Access to cutting-edge tools and first-class facilities Be part of a stable, expanding team with real career opportunities Join a company that's not just growing - it's thriving
Aug 30, 2026
Full time
Weekend PDI Technician 38,640 5-Day Week (Wednesday-Sunday) Premium Workshop Looking for a stable role in a modern, professional workshop? Join one of the most forward-thinking and expanding automotive groups in the industry as a Weekend PDI Technician . Enjoy a fixed salary, consistent working hours, and a supportive team environment where your skills are valued and developed. What's in it for you? 38,640 (dependent on experience & weekend working) Fixed salary - no bonus chasing or stressful targets Wednesday-Sunday schedule (consistent midweek days off) No customer interaction - focus on the technical work you enjoy PAYE, Holiday Pay, Pension & Uniform provided Comprehensive training across all makes & models A large, growing organisation with long-term stability The Role Carry out pre-delivery inspections (PDI) to the highest standards Perform stock checking to ensure accurate records and availability Conduct periodic forecourt inspections to maintain safety and presentation Deal with on-site breakdowns to keep operations running smoothly; some Diagnostic skills are helpful Give vehicles a final check before customer test drives Work across a variety of makes & models with access to modern tools Collaborate with colleagues in a supportive, team-focused environment Why You'll Love It Here A refreshing change from high-pressure, target-driven roles Access to cutting-edge tools and first-class facilities Be part of a stable, expanding team with real career opportunities Join a company that's not just growing - it's thriving
Venatu Recruitment Group
Kettering, Northamptonshire
Venatu Recruitment Group is seeking a qualified Heavy Vehicle Technician for a NEW contract role near Kettering, Northamptonshire. Typical hours are Monday to Friday, 7:30am-5:30pm, with a pay rate of £32 per hour outside IR35 and weekly pay. This contract offers variety across fleet workshops and the chance to work with blue chip customers. You'll service, inspect and repair HGVs to workshop standards, undertake MOT preparation and preventative maintenance, and perform fault diagnosis.
Aug 30, 2026
Full time
Venatu Recruitment Group is seeking a qualified Heavy Vehicle Technician for a NEW contract role near Kettering, Northamptonshire. Typical hours are Monday to Friday, 7:30am-5:30pm, with a pay rate of £32 per hour outside IR35 and weekly pay. This contract offers variety across fleet workshops and the chance to work with blue chip customers. You'll service, inspect and repair HGVs to workshop standards, undertake MOT preparation and preventative maintenance, and perform fault diagnosis.
Agricar Ltd in Stirling is looking for an Agricultural Service Technician to join our busy depot. You will carry out diagnostics, repairs and servicing on a wide range of agricultural machinery, both in our workshop and at customer sites, ensuring high standards of service. You'll work closely with the service team, providing technical support and maintaining our commitment to quality across Agricar, New Holland and Case IH equipment.
Aug 30, 2026
Full time
Agricar Ltd in Stirling is looking for an Agricultural Service Technician to join our busy depot. You will carry out diagnostics, repairs and servicing on a wide range of agricultural machinery, both in our workshop and at customer sites, ensuring high standards of service. You'll work closely with the service team, providing technical support and maintaining our commitment to quality across Agricar, New Holland and Case IH equipment.
Vehicle Technicians, Are you looking for an opportunity to be part of a dealer group and a LUXURY brand, that can offer a GREAT SALARY and continuous support to help you achieve your career goals, ongoing training and fantastic company benefits? The Recruitment Solution are currently recruiting for experienced Motor Vehicle Technicians to join our clients' leading brand, busy state of the art workshop based in the Warrington area. This is a fantastic opportunity for a qualified Vehicle Technician to work for a top performing dealership and prestige brand who offer fantastic company benefits, career development, second to none training and industry leading salary. Why Apply for this Vehicle Technician role? • Fantastic career opportunities, and an excellent salary! • State of the art resources and training • Company Pension • Performance Bonus • Company Benefits Scheme • Long Service Holiday Reward • Enhanced Family Planning Policy • Share Save Scheme • Your Birthday Off • You get to be a part of a prestige brand, who provide you with excellent support • Market leading £45,000+ OTE Vehicle Technician Requirements • Main Stream Dealership experience is preferred and you must have a minimum of 3 years' experience as a Vehicle Technician • Recognised Vehicle Maintenance Qualification - Minimum Level 3 • Full UK Licence • Must possess own tools • MOT Licence is also an advantage. To find out more about this Motor Vehicle Technician role or to apply for this vacancy you can email (url removed) quoting Motor Vehicle Technician or call the office on (phone number removed). Alternatively why not message or WhatsApp Daniel Walton directly today on (phone number removed). We have many different Motor Trade Jobs available from Service Manager, Service Team Leader, Aftersales Manager, Sales Executive, General Sales Manager, Sales Manager, Business Manager, Sales Admin, Body Shop Manager, Panel Beater, Dealer Principal, Motor Mechanic, Service Advisor, Bodyshop Estimator, Paint Sprayer, Motor Cycle Technicians & Mechanics, Vehicle Technician, Light Commercial Vehicle Technicians, HGV Fitters, Parts Advisor, Parts Manager, Workshop Controller, Trade Parts Representative, Fast Fit, Tyre Fitters, Warranty Administrator, Rental Advisor, Car Valetor, Collection & Delivery Drivers. Car Sales Executive, Car Sales person, Sales Executive, Car Sales, LCV Sales Executive, Commercial Vehicle Sales Executive, Service Advisor, Aftersales Advisor, Service Receptionist, Senior Service Advisor, Service Team Manager, Service Supervisor, STM Automotive Technician, PDI Technician, Service Technician, Senior Technician, Diagnostic Technician, Master Technician, Systems Technician, Qualified Technician, HGV Technician, LCV Technician, Heavy Goods Technician, Light Commercial Technician, Passenger Car Technician, Car Technician, Car Tech, LGV technician, Large Goods Vehicle Technician, Mechanic, HGV Fitter, Fast Fit Technician. Lots of Motor Trade Jobs throughout the UK. Call Us Now For Motor Trade Jobs, Working in Automotive Main Car Dealerships such as Mercedes, Audi, BMW, VW, Jaguar, Land Rover, Volvo, Bentley, Saab, Lexus, Toyota, Mazda, Ford, Peugeot, Renault, Citroen, Vauxhall, Nissan and many more.
Aug 30, 2026
Full time
Vehicle Technicians, Are you looking for an opportunity to be part of a dealer group and a LUXURY brand, that can offer a GREAT SALARY and continuous support to help you achieve your career goals, ongoing training and fantastic company benefits? The Recruitment Solution are currently recruiting for experienced Motor Vehicle Technicians to join our clients' leading brand, busy state of the art workshop based in the Warrington area. This is a fantastic opportunity for a qualified Vehicle Technician to work for a top performing dealership and prestige brand who offer fantastic company benefits, career development, second to none training and industry leading salary. Why Apply for this Vehicle Technician role? • Fantastic career opportunities, and an excellent salary! • State of the art resources and training • Company Pension • Performance Bonus • Company Benefits Scheme • Long Service Holiday Reward • Enhanced Family Planning Policy • Share Save Scheme • Your Birthday Off • You get to be a part of a prestige brand, who provide you with excellent support • Market leading £45,000+ OTE Vehicle Technician Requirements • Main Stream Dealership experience is preferred and you must have a minimum of 3 years' experience as a Vehicle Technician • Recognised Vehicle Maintenance Qualification - Minimum Level 3 • Full UK Licence • Must possess own tools • MOT Licence is also an advantage. To find out more about this Motor Vehicle Technician role or to apply for this vacancy you can email (url removed) quoting Motor Vehicle Technician or call the office on (phone number removed). Alternatively why not message or WhatsApp Daniel Walton directly today on (phone number removed). We have many different Motor Trade Jobs available from Service Manager, Service Team Leader, Aftersales Manager, Sales Executive, General Sales Manager, Sales Manager, Business Manager, Sales Admin, Body Shop Manager, Panel Beater, Dealer Principal, Motor Mechanic, Service Advisor, Bodyshop Estimator, Paint Sprayer, Motor Cycle Technicians & Mechanics, Vehicle Technician, Light Commercial Vehicle Technicians, HGV Fitters, Parts Advisor, Parts Manager, Workshop Controller, Trade Parts Representative, Fast Fit, Tyre Fitters, Warranty Administrator, Rental Advisor, Car Valetor, Collection & Delivery Drivers. Car Sales Executive, Car Sales person, Sales Executive, Car Sales, LCV Sales Executive, Commercial Vehicle Sales Executive, Service Advisor, Aftersales Advisor, Service Receptionist, Senior Service Advisor, Service Team Manager, Service Supervisor, STM Automotive Technician, PDI Technician, Service Technician, Senior Technician, Diagnostic Technician, Master Technician, Systems Technician, Qualified Technician, HGV Technician, LCV Technician, Heavy Goods Technician, Light Commercial Technician, Passenger Car Technician, Car Technician, Car Tech, LGV technician, Large Goods Vehicle Technician, Mechanic, HGV Fitter, Fast Fit Technician. Lots of Motor Trade Jobs throughout the UK. Call Us Now For Motor Trade Jobs, Working in Automotive Main Car Dealerships such as Mercedes, Audi, BMW, VW, Jaguar, Land Rover, Volvo, Bentley, Saab, Lexus, Toyota, Mazda, Ford, Peugeot, Renault, Citroen, Vauxhall, Nissan and many more.
HCP Automotive is seeking an experienced Vehicle Technician for its Surrey/Hampshire borders workshop. The role involves servicing, maintenance and repairs on customer vehicles to manufacturer standards, with training provided across HV/EV systems. Candidates should have Level 2 qualifications ( Level 3 preferred ) or equivalent time-served experience, a full UK licence and right to work in the UK. Hours are Mon-Fri 8am-5pm, Sat mornings on a rota.
Aug 30, 2026
Full time
HCP Automotive is seeking an experienced Vehicle Technician for its Surrey/Hampshire borders workshop. The role involves servicing, maintenance and repairs on customer vehicles to manufacturer standards, with training provided across HV/EV systems. Candidates should have Level 2 qualifications ( Level 3 preferred ) or equivalent time-served experience, a full UK licence and right to work in the UK. Hours are Mon-Fri 8am-5pm, Sat mornings on a rota.
Vehicle Technicians, Are you looking for an opportunity to be part of a dealer group and a LUXURY brand, that can offer a GREAT SALARY and continuous support to help you achieve your career goals, ongoing training and fantastic company benefits? PLUS £2500.00 joining bonus! The Recruitment Solution are currently recruiting for experienced Motor Vehicle Technicians to join our clients' leading brand, busy state of the art workshop based in the Norfolk area. This is a fantastic opportunity for a qualified Vehicle Technician to work for a top performing dealership and prestige brand who offer fantastic company benefits, career development, second to none training and industry leading salary. Why Apply for this Vehicle Technician role? • Fantastic career opportunities, and an excellent salary! Incl £2500.00 joining bonus! • State of the art resources and training • Company Pension • Performance Bonus • Company Benefits Scheme • Long Service Holiday Reward • Enhanced Family Planning Policy • Share Save Scheme • Your Birthday Off • You get to be a part of a prestige brand, who provide you with excellent support • Market leading £45,000+ OTE Plus £2500 joining bonus! Vehicle Technician Requirements • Main Stream Dealership experience is preferred and you must have a minimum of 3 years' experience as a Vehicle Technician • Recognised Vehicle Maintenance Qualification - Minimum Level 3 • Full UK Licence • Must possess own tools • MOT Licence is also an advantage. To find out more about this Motor Vehicle Technician role or to apply for this vacancy you can email (url removed) quoting Motor Vehicle Technician or call the office on (phone number removed). Alternatively why not message or WhatsApp Daniel Walton directly today on (phone number removed). We have many different Motor Trade Jobs available from Service Manager, Service Team Leader, Aftersales Manager, Sales Executive, General Sales Manager, Sales Manager, Business Manager, Sales Admin, Body Shop Manager, Panel Beater, Dealer Principal, Motor Mechanic, Service Advisor, Bodyshop Estimator, Paint Sprayer, Motor Cycle Technicians & Mechanics, Vehicle Technician, Light Commercial Vehicle Technicians, HGV Fitters, Parts Advisor, Parts Manager, Workshop Controller, Trade Parts Representative, Fast Fit, Tyre Fitters, Warranty Administrator, Rental Advisor, Car Valetor, Collection & Delivery Drivers. Car Sales Executive, Car Sales person, Sales Executive, Car Sales, LCV Sales Executive, Commercial Vehicle Sales Executive, Service Advisor, Aftersales Advisor, Service Receptionist, Senior Service Advisor, Service Team Manager, Service Supervisor, STM Automotive Technician, PDI Technician, Service Technician, Senior Technician, Diagnostic Technician, Master Technician, Systems Technician, Qualified Technician, HGV Technician, LCV Technician, Heavy Goods Technician, Light Commercial Technician, Passenger Car Technician, Car Technician, Car Tech, LGV technician, Large Goods Vehicle Technician, Mechanic, HGV Fitter, Fast Fit Technician. Lots of Motor Trade Jobs throughout the UK. Call Us Now For Motor Trade Jobs, Working in Automotive Main Car Dealerships such as Mercedes, Audi, BMW, VW, Jaguar, Land Rover, Volvo, Bentley, Saab, Lexus, Toyota, Mazda, Ford, Peugeot, Renault, Citroen, Vauxhall, Nissan and many more.
Aug 30, 2026
Full time
Vehicle Technicians, Are you looking for an opportunity to be part of a dealer group and a LUXURY brand, that can offer a GREAT SALARY and continuous support to help you achieve your career goals, ongoing training and fantastic company benefits? PLUS £2500.00 joining bonus! The Recruitment Solution are currently recruiting for experienced Motor Vehicle Technicians to join our clients' leading brand, busy state of the art workshop based in the Norfolk area. This is a fantastic opportunity for a qualified Vehicle Technician to work for a top performing dealership and prestige brand who offer fantastic company benefits, career development, second to none training and industry leading salary. Why Apply for this Vehicle Technician role? • Fantastic career opportunities, and an excellent salary! Incl £2500.00 joining bonus! • State of the art resources and training • Company Pension • Performance Bonus • Company Benefits Scheme • Long Service Holiday Reward • Enhanced Family Planning Policy • Share Save Scheme • Your Birthday Off • You get to be a part of a prestige brand, who provide you with excellent support • Market leading £45,000+ OTE Plus £2500 joining bonus! Vehicle Technician Requirements • Main Stream Dealership experience is preferred and you must have a minimum of 3 years' experience as a Vehicle Technician • Recognised Vehicle Maintenance Qualification - Minimum Level 3 • Full UK Licence • Must possess own tools • MOT Licence is also an advantage. To find out more about this Motor Vehicle Technician role or to apply for this vacancy you can email (url removed) quoting Motor Vehicle Technician or call the office on (phone number removed). Alternatively why not message or WhatsApp Daniel Walton directly today on (phone number removed). We have many different Motor Trade Jobs available from Service Manager, Service Team Leader, Aftersales Manager, Sales Executive, General Sales Manager, Sales Manager, Business Manager, Sales Admin, Body Shop Manager, Panel Beater, Dealer Principal, Motor Mechanic, Service Advisor, Bodyshop Estimator, Paint Sprayer, Motor Cycle Technicians & Mechanics, Vehicle Technician, Light Commercial Vehicle Technicians, HGV Fitters, Parts Advisor, Parts Manager, Workshop Controller, Trade Parts Representative, Fast Fit, Tyre Fitters, Warranty Administrator, Rental Advisor, Car Valetor, Collection & Delivery Drivers. Car Sales Executive, Car Sales person, Sales Executive, Car Sales, LCV Sales Executive, Commercial Vehicle Sales Executive, Service Advisor, Aftersales Advisor, Service Receptionist, Senior Service Advisor, Service Team Manager, Service Supervisor, STM Automotive Technician, PDI Technician, Service Technician, Senior Technician, Diagnostic Technician, Master Technician, Systems Technician, Qualified Technician, HGV Technician, LCV Technician, Heavy Goods Technician, Light Commercial Technician, Passenger Car Technician, Car Technician, Car Tech, LGV technician, Large Goods Vehicle Technician, Mechanic, HGV Fitter, Fast Fit Technician. Lots of Motor Trade Jobs throughout the UK. Call Us Now For Motor Trade Jobs, Working in Automotive Main Car Dealerships such as Mercedes, Audi, BMW, VW, Jaguar, Land Rover, Volvo, Bentley, Saab, Lexus, Toyota, Mazda, Ford, Peugeot, Renault, Citroen, Vauxhall, Nissan and many more.
Allied Vehicles Ltd in Glasgow is seeking a Valeter to join the Operations team. You will clean and prepare vehicles to high standards following repairs, ensuring presentation quality across busy workshop activity. The role requires a full UK Driving Licence, strong cleaning knowledge, and the ability to work to deadlines. Hours are Mon-Wed 7am-6pm and Thu 7am-5:30pm, with a salary of £13.45 per hour plus a bonus.
Aug 30, 2026
Full time
Allied Vehicles Ltd in Glasgow is seeking a Valeter to join the Operations team. You will clean and prepare vehicles to high standards following repairs, ensuring presentation quality across busy workshop activity. The role requires a full UK Driving Licence, strong cleaning knowledge, and the ability to work to deadlines. Hours are Mon-Wed 7am-6pm and Thu 7am-5:30pm, with a salary of £13.45 per hour plus a bonus.
