System Test & Verification Engineer (Hardware-in-the-Loop) Location: Bristol On site 3 Days per Week Salary: £60,000 £75,000 + Bonus & Benefits (depending on experience) Note : All applicants must be able to work in the UK without the need for VISA Sponsorship now, or in the future Summary : On behalf of a client in Bristol, we are looking for a Hardware-in-the-Loop (HiL) Test Engineer to support the development and validation of safety-critical embedded systems where reliability, performance, and quality are paramount They will take ownership of test strategy and execution for both legacy and new product developments, designing test cases, generating scenarios, and performing automated and manual testing to ensure solutions meet defined requirements. Key Responsibilities : Developing, implementing, and maintaining Hardware-in-the-Loop Simulation (HiLS) environments to support the testing of hardware and firmware for safety-critical systems. Creating and executing robust test plans, procedures, and automated test cases to verify and validate product requirements. Integrating physical hardware with virtual models and simulation platforms to create realistic testing environments. Designing test scenarios that replicate real-world operating conditions and potential failure modes. Supporting product verification and validation activities throughout the development lifecycle. Analysing test results, investigating failures, and working closely with engineering teams to identify root causes and implement corrective actions. Producing clear technical reports and documentation to support design reviews, regulatory compliance, and product sign-off. Contributing to reliability engineering activities, including risk assessments, Failure Mode and Effects Analysis (FMEA), and continuous improvement initiatives. Ensuring full traceability between requirements, test coverage, and validation outcomes. Experience Required : Proven experience working with Hardware-in-the-Loop Simulation (HiLS) platforms such as Speedgoat, dSPACE, National Instruments (NI), or similar. Experience using MATLAB/Simulink and/or LabVIEW. Strong Python scripting and test automation experience. Good understanding of embedded systems, control systems, and system integration. Experience working within structured development and testing environments, ideally involving safety-critical or high-reliability products. Experience using Git or similar version control systems. Benefits Package Competitive pension scheme (up to 7% employer matched) Discretionary annual bonus (typically around 10%) 25 days annual leave plus 8 bank holidays Private medical healthcare Hybrid working and flexitime Annual wellness checks Retail vouchers If you re interested in learning more about this opportunity, please apply with your latest CV.
Jul 26, 2026
Full time
System Test & Verification Engineer (Hardware-in-the-Loop) Location: Bristol On site 3 Days per Week Salary: £60,000 £75,000 + Bonus & Benefits (depending on experience) Note : All applicants must be able to work in the UK without the need for VISA Sponsorship now, or in the future Summary : On behalf of a client in Bristol, we are looking for a Hardware-in-the-Loop (HiL) Test Engineer to support the development and validation of safety-critical embedded systems where reliability, performance, and quality are paramount They will take ownership of test strategy and execution for both legacy and new product developments, designing test cases, generating scenarios, and performing automated and manual testing to ensure solutions meet defined requirements. Key Responsibilities : Developing, implementing, and maintaining Hardware-in-the-Loop Simulation (HiLS) environments to support the testing of hardware and firmware for safety-critical systems. Creating and executing robust test plans, procedures, and automated test cases to verify and validate product requirements. Integrating physical hardware with virtual models and simulation platforms to create realistic testing environments. Designing test scenarios that replicate real-world operating conditions and potential failure modes. Supporting product verification and validation activities throughout the development lifecycle. Analysing test results, investigating failures, and working closely with engineering teams to identify root causes and implement corrective actions. Producing clear technical reports and documentation to support design reviews, regulatory compliance, and product sign-off. Contributing to reliability engineering activities, including risk assessments, Failure Mode and Effects Analysis (FMEA), and continuous improvement initiatives. Ensuring full traceability between requirements, test coverage, and validation outcomes. Experience Required : Proven experience working with Hardware-in-the-Loop Simulation (HiLS) platforms such as Speedgoat, dSPACE, National Instruments (NI), or similar. Experience using MATLAB/Simulink and/or LabVIEW. Strong Python scripting and test automation experience. Good understanding of embedded systems, control systems, and system integration. Experience working within structured development and testing environments, ideally involving safety-critical or high-reliability products. Experience using Git or similar version control systems. Benefits Package Competitive pension scheme (up to 7% employer matched) Discretionary annual bonus (typically around 10%) 25 days annual leave plus 8 bank holidays Private medical healthcare Hybrid working and flexitime Annual wellness checks Retail vouchers If you re interested in learning more about this opportunity, please apply with your latest CV.
EMC Engineer Location: Bristol Salary: Up to £55,000 + Bonus & Benefits Hybrid Working: 2-3 Days On-Site Security Clearance: Due to the nature of this role, only UK citizens are eligible to apply A fantastic opportunity has arisen for an EMC Engineer to join a specialist engineering team within a leading UK Defence based organisation, supporting the development of highly complex electronic systems. Working across the full product lifecycle, you'll provide technical expertise in Electromagnetic Compatibility (EMC), helping to ensure products are designed, tested and qualified to operate reliably in demanding environments. You'll work closely with electronics, systems and project teams, supporting everything from early concept development through to qualification, testing and product delivery. This is an excellent opportunity for an Electronics Engineer looking to develop specialist EMC expertise or an experienced EMC professional seeking exposure to challenging and technically advanced projects. Key Responsibilities Provide EMC guidance and technical support throughout the product development lifecycle. Review electronic designs and identify potential EMC risks and compliance issues. Develop and maintain qualification strategies, test plans and supporting documentation. Support verification, validation and certification activities. Investigate technical issues and provide practical engineering solutions. Liaise with multidisciplinary engineering teams to ensure products meet EMC requirements and industry standards. Support testing activities, including reviewing results and implementing corrective actions where required. Essential Skills & Experience Degree or equivalent experience in Electronics Engineering, Electrical Engineering, Physics, EMC or a related technical discipline. Good understanding of Electromagnetic Compatibility (EMC) principles and their application to electronic systems. Experience working with electronic or electrical products within a design, development, testing or qualification environment. Ability to assess designs and identify EMC-related risks and compliance considerations. Experience producing technical documentation, reports, specifications or test plans. Strong analytical and problem-solving skills. Ability to work effectively within multidisciplinary engineering teams and manage competing priorities. Strong communication skills, both written and verbal. Desirable Skills & Experience Previous EMC testing, compliance or qualification experience. Knowledge of standards such as: DEF STAN 59-411 MIL-STD-461 RTCA DO-160 AECTP 500 Experience with RF systems, analogue electronics or digital electronics design. Experience working within aerospace, defence, automotive or other regulated industries. What's On Offer? Competitive salary and bonus scheme Excellent pension contribution Hybrid and flexible working arrangements Ongoing training and career development Exposure to highly advanced electronic systems and technologies Opportunity to work across the full engineering lifecycle on technically complex programmes If you're an Electronics Engineer, EMC Engineer or RF Engineer looking to work on challenging projects within a collaborative and innovative engineering environment, we'd love to hear from you. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/ or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
Jul 26, 2026
Full time
EMC Engineer Location: Bristol Salary: Up to £55,000 + Bonus & Benefits Hybrid Working: 2-3 Days On-Site Security Clearance: Due to the nature of this role, only UK citizens are eligible to apply A fantastic opportunity has arisen for an EMC Engineer to join a specialist engineering team within a leading UK Defence based organisation, supporting the development of highly complex electronic systems. Working across the full product lifecycle, you'll provide technical expertise in Electromagnetic Compatibility (EMC), helping to ensure products are designed, tested and qualified to operate reliably in demanding environments. You'll work closely with electronics, systems and project teams, supporting everything from early concept development through to qualification, testing and product delivery. This is an excellent opportunity for an Electronics Engineer looking to develop specialist EMC expertise or an experienced EMC professional seeking exposure to challenging and technically advanced projects. Key Responsibilities Provide EMC guidance and technical support throughout the product development lifecycle. Review electronic designs and identify potential EMC risks and compliance issues. Develop and maintain qualification strategies, test plans and supporting documentation. Support verification, validation and certification activities. Investigate technical issues and provide practical engineering solutions. Liaise with multidisciplinary engineering teams to ensure products meet EMC requirements and industry standards. Support testing activities, including reviewing results and implementing corrective actions where required. Essential Skills & Experience Degree or equivalent experience in Electronics Engineering, Electrical Engineering, Physics, EMC or a related technical discipline. Good understanding of Electromagnetic Compatibility (EMC) principles and their application to electronic systems. Experience working with electronic or electrical products within a design, development, testing or qualification environment. Ability to assess designs and identify EMC-related risks and compliance considerations. Experience producing technical documentation, reports, specifications or test plans. Strong analytical and problem-solving skills. Ability to work effectively within multidisciplinary engineering teams and manage competing priorities. Strong communication skills, both written and verbal. Desirable Skills & Experience Previous EMC testing, compliance or qualification experience. Knowledge of standards such as: DEF STAN 59-411 MIL-STD-461 RTCA DO-160 AECTP 500 Experience with RF systems, analogue electronics or digital electronics design. Experience working within aerospace, defence, automotive or other regulated industries. What's On Offer? Competitive salary and bonus scheme Excellent pension contribution Hybrid and flexible working arrangements Ongoing training and career development Exposure to highly advanced electronic systems and technologies Opportunity to work across the full engineering lifecycle on technically complex programmes If you're an Electronics Engineer, EMC Engineer or RF Engineer looking to work on challenging projects within a collaborative and innovative engineering environment, we'd love to hear from you. Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. By applying for this role your details will be submitted to Modis International Ltd and/ or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.
M&E Site Supervisor - HV Substations (GIS & SF6 Specialist) Location: UK Wide (National Grid Infrastructure Sites) Contract: Long-term programme of works (initial placement with extensions expected) Day Rate: £450 CIS / Ltd (depending on experience) Requirement: National Grid Authorisation / Person Ticket essential Turner Lovell is partnering with a rapidly expanding specialist contractor operating within the UK high-voltage transmission sector. With a strong secured pipeline of National Grid substation works, they are now seeking an experienced M&E Site Supervisor with proven capability across GIS installations and SF6 gas systems. This position offers the chance to join a business in a clear growth phase, delivering complex substation upgrades and new build works across critical UK energy infrastructure. The successful individual will oversee mechanical and electrical site activities within HV substations, supporting delivery through installation, maintenance, refurbishment, and commissioning stages. A solid understanding of GIS equipment and SF6 handling procedures is a key requirement for this role. A strong balance of electrical and mechanical site supervision experience within high-voltage environments is essential, alongside a clear understanding of compliance, safety, and environmental responsibilities associated with SF6 systems. Key Responsibilities Lead M&E site supervision across HV substation projects throughout the UK Coordinate daily site operations, including direct labour, subcontractors, and specialist engineering teams Oversee installation, servicing, and refurbishment works on Gas Insulated Switchgear (GIS) Manage and supervise all SF6 gas-related activities, including: Gas transfer, filling, and recovery operations Leak identification, reporting, and corrective actions Routine gas testing, condition monitoring, and compliance verification Ensure all works are delivered in accordance with National Grid procedures, permits, and operational standards Maintain strict adherence to health, safety, and environmental regulations, with particular focus on SF6 control Work closely with client representatives, HSE teams, engineers, and commissioning personnel on site Track and report on site progress, productivity, and quality outputs to senior management Maintain accurate site records, including SF6 handling data and inspection results Assist in outage coordination, planning activities, and multi-discipline site delivery Promote and enforce high standards of safety, quality, and environmental performance across all site operations Requirements Demonstrable experience supervising UK high-voltage substation projects Strong capability across both electrical and mechanical site supervision Practical experience working with GIS systems and SF6 gas handling Sound understanding of F-Gas legislation and environmental compliance obligations Background within National Grid or comparable transmission environments Ability to interpret technical drawings, schematics, and engineering documentation Proven leadership experience managing multiple site teams and subcontractors Strong working knowledge of HSE regulations and HV safe systems of work Recognised site qualifications (SMSTS / SSSTS / CSCS / Safety Passport or equivalent) National Grid authorisation or eligibility to achieve authorisation Why This Role? Join a contractor experiencing strong and sustained growth in the HV transmission sector Work across a secured long-term pipeline of National Grid substation projects Be involved in technically demanding GIS and SF6-focused works Opportunity to develop within a business expanding its presence in the UK energy infrastructure market If you're available for your next assignment, please apply or contact Hope Brown - JBRP1_UKTJ
Jul 26, 2026
Full time
M&E Site Supervisor - HV Substations (GIS & SF6 Specialist) Location: UK Wide (National Grid Infrastructure Sites) Contract: Long-term programme of works (initial placement with extensions expected) Day Rate: £450 CIS / Ltd (depending on experience) Requirement: National Grid Authorisation / Person Ticket essential Turner Lovell is partnering with a rapidly expanding specialist contractor operating within the UK high-voltage transmission sector. With a strong secured pipeline of National Grid substation works, they are now seeking an experienced M&E Site Supervisor with proven capability across GIS installations and SF6 gas systems. This position offers the chance to join a business in a clear growth phase, delivering complex substation upgrades and new build works across critical UK energy infrastructure. The successful individual will oversee mechanical and electrical site activities within HV substations, supporting delivery through installation, maintenance, refurbishment, and commissioning stages. A solid understanding of GIS equipment and SF6 handling procedures is a key requirement for this role. A strong balance of electrical and mechanical site supervision experience within high-voltage environments is essential, alongside a clear understanding of compliance, safety, and environmental responsibilities associated with SF6 systems. Key Responsibilities Lead M&E site supervision across HV substation projects throughout the UK Coordinate daily site operations, including direct labour, subcontractors, and specialist engineering teams Oversee installation, servicing, and refurbishment works on Gas Insulated Switchgear (GIS) Manage and supervise all SF6 gas-related activities, including: Gas transfer, filling, and recovery operations Leak identification, reporting, and corrective actions Routine gas testing, condition monitoring, and compliance verification Ensure all works are delivered in accordance with National Grid procedures, permits, and operational standards Maintain strict adherence to health, safety, and environmental regulations, with particular focus on SF6 control Work closely with client representatives, HSE teams, engineers, and commissioning personnel on site Track and report on site progress, productivity, and quality outputs to senior management Maintain accurate site records, including SF6 handling data and inspection results Assist in outage coordination, planning activities, and multi-discipline site delivery Promote and enforce high standards of safety, quality, and environmental performance across all site operations Requirements Demonstrable experience supervising UK high-voltage substation projects Strong capability across both electrical and mechanical site supervision Practical experience working with GIS systems and SF6 gas handling Sound understanding of F-Gas legislation and environmental compliance obligations Background within National Grid or comparable transmission environments Ability to interpret technical drawings, schematics, and engineering documentation Proven leadership experience managing multiple site teams and subcontractors Strong working knowledge of HSE regulations and HV safe systems of work Recognised site qualifications (SMSTS / SSSTS / CSCS / Safety Passport or equivalent) National Grid authorisation or eligibility to achieve authorisation Why This Role? Join a contractor experiencing strong and sustained growth in the HV transmission sector Work across a secured long-term pipeline of National Grid substation projects Be involved in technically demanding GIS and SF6-focused works Opportunity to develop within a business expanding its presence in the UK energy infrastructure market If you're available for your next assignment, please apply or contact Hope Brown - JBRP1_UKTJ
A leading manufacturer of Semiconductor Tools is now looking for Product Support Manager to provide software support to both customers across the EMEAI and also Process and Service Engineers in the field. This role provides a vital link between Field based Engineers and the Software Engineering team, driving the swift resolution of complex challenges while fostering continuous improvement through effective training, knowledge sharing, and valuable customer feedback. You will provide advanced software expertise and rapid escalation support to Customer Service Engineers in the field, ensuring timely resolution of complex technical issues, maximising customer uptime and feeding systemic improvement back into Product and Engineering teams. Your contribution will reduce customer downtime, enhance customer trust, protect revenue, improve Customer Service Engineer capability and confidence and accelerate feedback loops from the field. Where required, you will visit customer sites and / or Field based teams, to ensure swift resolution of any issues, and build stronger relationships with customers. This is a fantastic opportunity for an experienced Software Service Engineer / Manager to take the next step in their career and deliver results for customers and my client. In addition to a modern working environment, competitive salary and hybrid working, my client offers a flexible range of benefits. Experience: To succeed in this role, you should have previous experience working within semiconductor or advanced manufacturing, coupled with experience with complex systems, log analysis and diagnostics, and software-hardware integration. You should also have in depth knowledge of Windows Software and experience working on real-time control systems. You should also be familiar with some or all of the following: remote diagnostic tools and service environments, C#, .NET Core and WPF framework, C++, C, SQL (MySQL), and PLC programming; Azure DevOps for task tracking and GitHub for version control & CI/CD pipelines; network protocols, TCP/IP, UDP, Modbus, EtherCAT etc. Qualifications: Apprenticeship and/or Degree in Software, Computing or a related field. Additional Information: Candidates MUST be eligible to live and work in the UK without requiring sponsorship. Copies of Passport and Visa will be requested for verification. Salary: c 40-50k plus benefits Job Term : Permanent, Full Time, Hybrid Skills: Software, Customer Service, Applications, Customer Support, Training, Semiconductor, C#, C, .NET, SQL, PLC
Jul 26, 2026
Full time
A leading manufacturer of Semiconductor Tools is now looking for Product Support Manager to provide software support to both customers across the EMEAI and also Process and Service Engineers in the field. This role provides a vital link between Field based Engineers and the Software Engineering team, driving the swift resolution of complex challenges while fostering continuous improvement through effective training, knowledge sharing, and valuable customer feedback. You will provide advanced software expertise and rapid escalation support to Customer Service Engineers in the field, ensuring timely resolution of complex technical issues, maximising customer uptime and feeding systemic improvement back into Product and Engineering teams. Your contribution will reduce customer downtime, enhance customer trust, protect revenue, improve Customer Service Engineer capability and confidence and accelerate feedback loops from the field. Where required, you will visit customer sites and / or Field based teams, to ensure swift resolution of any issues, and build stronger relationships with customers. This is a fantastic opportunity for an experienced Software Service Engineer / Manager to take the next step in their career and deliver results for customers and my client. In addition to a modern working environment, competitive salary and hybrid working, my client offers a flexible range of benefits. Experience: To succeed in this role, you should have previous experience working within semiconductor or advanced manufacturing, coupled with experience with complex systems, log analysis and diagnostics, and software-hardware integration. You should also have in depth knowledge of Windows Software and experience working on real-time control systems. You should also be familiar with some or all of the following: remote diagnostic tools and service environments, C#, .NET Core and WPF framework, C++, C, SQL (MySQL), and PLC programming; Azure DevOps for task tracking and GitHub for version control & CI/CD pipelines; network protocols, TCP/IP, UDP, Modbus, EtherCAT etc. Qualifications: Apprenticeship and/or Degree in Software, Computing or a related field. Additional Information: Candidates MUST be eligible to live and work in the UK without requiring sponsorship. Copies of Passport and Visa will be requested for verification. Salary: c 40-50k plus benefits Job Term : Permanent, Full Time, Hybrid Skills: Software, Customer Service, Applications, Customer Support, Training, Semiconductor, C#, C, .NET, SQL, PLC
M&E Site Supervisor - HV Substations (GIS & SF6 Specialist) Location: UK Wide (National Grid Infrastructure Sites) Contract: Long-term programme of works (initial placement with extensions expected) Day Rate: £450 CIS / Ltd (depending on experience) Requirement: National Grid Authorisation / Person Ticket essential Turner Lovell is partnering with a rapidly expanding specialist contractor operating within the UK high-voltage transmission sector. With a strong secured pipeline of National Grid substation works, they are now seeking an experienced M&E Site Supervisor with proven capability across GIS installations and SF6 gas systems. This position offers the chance to join a business in a clear growth phase, delivering complex substation upgrades and new build works across critical UK energy infrastructure. The successful individual will oversee mechanical and electrical site activities within HV substations, supporting delivery through installation, maintenance, refurbishment, and commissioning stages. A solid understanding of GIS equipment and SF6 handling procedures is a key requirement for this role. A strong balance of electrical and mechanical site supervision experience within high-voltage environments is essential, alongside a clear understanding of compliance, safety, and environmental responsibilities associated with SF6 systems. Key Responsibilities Lead M&E site supervision across HV substation projects throughout the UK Coordinate daily site operations, including direct labour, subcontractors, and specialist engineering teams Oversee installation, servicing, and refurbishment works on Gas Insulated Switchgear (GIS) Manage and supervise all SF6 gas-related activities, including: Gas transfer, filling, and recovery operations Leak identification, reporting, and corrective actions Routine gas testing, condition monitoring, and compliance verification Ensure all works are delivered in accordance with National Grid procedures, permits, and operational standards Maintain strict adherence to health, safety, and environmental regulations, with particular focus on SF6 control Work closely with client representatives, HSE teams, engineers, and commissioning personnel on site Track and report on site progress, productivity, and quality outputs to senior management Maintain accurate site records, including SF6 handling data and inspection results Assist in outage coordination, planning activities, and multi-discipline site delivery Promote and enforce high standards of safety, quality, and environmental performance across all site operations Requirements Demonstrable experience supervising UK high-voltage substation projects Strong capability across both electrical and mechanical site supervision Practical experience working with GIS systems and SF6 gas handling Sound understanding of F-Gas legislation and environmental compliance obligations Background within National Grid or comparable transmission environments Ability to interpret technical drawings, schematics, and engineering documentation Proven leadership experience managing multiple site teams and subcontractors Strong working knowledge of HSE regulations and HV safe systems of work Recognised site qualifications (SMSTS / SSSTS / CSCS / Safety Passport or equivalent) National Grid authorisation or eligibility to achieve authorisation Why This Role? Join a contractor experiencing strong and sustained growth in the HV transmission sector Work across a secured long-term pipeline of National Grid substation projects Be involved in technically demanding GIS and SF6-focused works Opportunity to develop within a business expanding its presence in the UK energy infrastructure market If you're available for your next assignment, please apply or contact Hope Brown - JBRP1_UKTJ
Jul 26, 2026
Full time
M&E Site Supervisor - HV Substations (GIS & SF6 Specialist) Location: UK Wide (National Grid Infrastructure Sites) Contract: Long-term programme of works (initial placement with extensions expected) Day Rate: £450 CIS / Ltd (depending on experience) Requirement: National Grid Authorisation / Person Ticket essential Turner Lovell is partnering with a rapidly expanding specialist contractor operating within the UK high-voltage transmission sector. With a strong secured pipeline of National Grid substation works, they are now seeking an experienced M&E Site Supervisor with proven capability across GIS installations and SF6 gas systems. This position offers the chance to join a business in a clear growth phase, delivering complex substation upgrades and new build works across critical UK energy infrastructure. The successful individual will oversee mechanical and electrical site activities within HV substations, supporting delivery through installation, maintenance, refurbishment, and commissioning stages. A solid understanding of GIS equipment and SF6 handling procedures is a key requirement for this role. A strong balance of electrical and mechanical site supervision experience within high-voltage environments is essential, alongside a clear understanding of compliance, safety, and environmental responsibilities associated with SF6 systems. Key Responsibilities Lead M&E site supervision across HV substation projects throughout the UK Coordinate daily site operations, including direct labour, subcontractors, and specialist engineering teams Oversee installation, servicing, and refurbishment works on Gas Insulated Switchgear (GIS) Manage and supervise all SF6 gas-related activities, including: Gas transfer, filling, and recovery operations Leak identification, reporting, and corrective actions Routine gas testing, condition monitoring, and compliance verification Ensure all works are delivered in accordance with National Grid procedures, permits, and operational standards Maintain strict adherence to health, safety, and environmental regulations, with particular focus on SF6 control Work closely with client representatives, HSE teams, engineers, and commissioning personnel on site Track and report on site progress, productivity, and quality outputs to senior management Maintain accurate site records, including SF6 handling data and inspection results Assist in outage coordination, planning activities, and multi-discipline site delivery Promote and enforce high standards of safety, quality, and environmental performance across all site operations Requirements Demonstrable experience supervising UK high-voltage substation projects Strong capability across both electrical and mechanical site supervision Practical experience working with GIS systems and SF6 gas handling Sound understanding of F-Gas legislation and environmental compliance obligations Background within National Grid or comparable transmission environments Ability to interpret technical drawings, schematics, and engineering documentation Proven leadership experience managing multiple site teams and subcontractors Strong working knowledge of HSE regulations and HV safe systems of work Recognised site qualifications (SMSTS / SSSTS / CSCS / Safety Passport or equivalent) National Grid authorisation or eligibility to achieve authorisation Why This Role? Join a contractor experiencing strong and sustained growth in the HV transmission sector Work across a secured long-term pipeline of National Grid substation projects Be involved in technically demanding GIS and SF6-focused works Opportunity to develop within a business expanding its presence in the UK energy infrastructure market If you're available for your next assignment, please apply or contact Hope Brown - JBRP1_UKTJ
M&E Site Supervisor - HV Substations (GIS & SF6 Specialist) Location: UK Wide (National Grid Infrastructure Sites) Contract: Long-term programme of works (initial placement with extensions expected) Day Rate: £450 CIS / Ltd (depending on experience) Requirement: National Grid Authorisation / Person Ticket essential Turner Lovell is partnering with a rapidly expanding specialist contractor operating within the UK high-voltage transmission sector. With a strong secured pipeline of National Grid substation works, they are now seeking an experienced M&E Site Supervisor with proven capability across GIS installations and SF6 gas systems. This position offers the chance to join a business in a clear growth phase, delivering complex substation upgrades and new build works across critical UK energy infrastructure. The successful individual will oversee mechanical and electrical site activities within HV substations, supporting delivery through installation, maintenance, refurbishment, and commissioning stages. A solid understanding of GIS equipment and SF6 handling procedures is a key requirement for this role. A strong balance of electrical and mechanical site supervision experience within high-voltage environments is essential, alongside a clear understanding of compliance, safety, and environmental responsibilities associated with SF6 systems. Key Responsibilities Lead M&E site supervision across HV substation projects throughout the UK Coordinate daily site operations, including direct labour, subcontractors, and specialist engineering teams Oversee installation, servicing, and refurbishment works on Gas Insulated Switchgear (GIS) Manage and supervise all SF6 gas-related activities, including: Gas transfer, filling, and recovery operations Leak identification, reporting, and corrective actions Routine gas testing, condition monitoring, and compliance verification Ensure all works are delivered in accordance with National Grid procedures, permits, and operational standards Maintain strict adherence to health, safety, and environmental regulations, with particular focus on SF6 control Work closely with client representatives, HSE teams, engineers, and commissioning personnel on site Track and report on site progress, productivity, and quality outputs to senior management Maintain accurate site records, including SF6 handling data and inspection results Assist in outage coordination, planning activities, and multi-discipline site delivery Promote and enforce high standards of safety, quality, and environmental performance across all site operations Requirements Demonstrable experience supervising UK high-voltage substation projects Strong capability across both electrical and mechanical site supervision Practical experience working with GIS systems and SF6 gas handling Sound understanding of F-Gas legislation and environmental compliance obligations Background within National Grid or comparable transmission environments Ability to interpret technical drawings, schematics, and engineering documentation Proven leadership experience managing multiple site teams and subcontractors Strong working knowledge of HSE regulations and HV safe systems of work Recognised site qualifications (SMSTS / SSSTS / CSCS / Safety Passport or equivalent) National Grid authorisation or eligibility to achieve authorisation Why This Role? Join a contractor experiencing strong and sustained growth in the HV transmission sector Work across a secured long-term pipeline of National Grid substation projects Be involved in technically demanding GIS and SF6-focused works Opportunity to develop within a business expanding its presence in the UK energy infrastructure market If you're available for your next assignment, please apply or contact Hope Brown - JBRP1_UKTJ
Jul 26, 2026
Full time
M&E Site Supervisor - HV Substations (GIS & SF6 Specialist) Location: UK Wide (National Grid Infrastructure Sites) Contract: Long-term programme of works (initial placement with extensions expected) Day Rate: £450 CIS / Ltd (depending on experience) Requirement: National Grid Authorisation / Person Ticket essential Turner Lovell is partnering with a rapidly expanding specialist contractor operating within the UK high-voltage transmission sector. With a strong secured pipeline of National Grid substation works, they are now seeking an experienced M&E Site Supervisor with proven capability across GIS installations and SF6 gas systems. This position offers the chance to join a business in a clear growth phase, delivering complex substation upgrades and new build works across critical UK energy infrastructure. The successful individual will oversee mechanical and electrical site activities within HV substations, supporting delivery through installation, maintenance, refurbishment, and commissioning stages. A solid understanding of GIS equipment and SF6 handling procedures is a key requirement for this role. A strong balance of electrical and mechanical site supervision experience within high-voltage environments is essential, alongside a clear understanding of compliance, safety, and environmental responsibilities associated with SF6 systems. Key Responsibilities Lead M&E site supervision across HV substation projects throughout the UK Coordinate daily site operations, including direct labour, subcontractors, and specialist engineering teams Oversee installation, servicing, and refurbishment works on Gas Insulated Switchgear (GIS) Manage and supervise all SF6 gas-related activities, including: Gas transfer, filling, and recovery operations Leak identification, reporting, and corrective actions Routine gas testing, condition monitoring, and compliance verification Ensure all works are delivered in accordance with National Grid procedures, permits, and operational standards Maintain strict adherence to health, safety, and environmental regulations, with particular focus on SF6 control Work closely with client representatives, HSE teams, engineers, and commissioning personnel on site Track and report on site progress, productivity, and quality outputs to senior management Maintain accurate site records, including SF6 handling data and inspection results Assist in outage coordination, planning activities, and multi-discipline site delivery Promote and enforce high standards of safety, quality, and environmental performance across all site operations Requirements Demonstrable experience supervising UK high-voltage substation projects Strong capability across both electrical and mechanical site supervision Practical experience working with GIS systems and SF6 gas handling Sound understanding of F-Gas legislation and environmental compliance obligations Background within National Grid or comparable transmission environments Ability to interpret technical drawings, schematics, and engineering documentation Proven leadership experience managing multiple site teams and subcontractors Strong working knowledge of HSE regulations and HV safe systems of work Recognised site qualifications (SMSTS / SSSTS / CSCS / Safety Passport or equivalent) National Grid authorisation or eligibility to achieve authorisation Why This Role? Join a contractor experiencing strong and sustained growth in the HV transmission sector Work across a secured long-term pipeline of National Grid substation projects Be involved in technically demanding GIS and SF6-focused works Opportunity to develop within a business expanding its presence in the UK energy infrastructure market If you're available for your next assignment, please apply or contact Hope Brown - JBRP1_UKTJ
M&E Site Supervisor - HV Substations (GIS & SF6 Specialist) Location: UK Wide (National Grid Infrastructure Sites) Contract: Long-term programme of works (initial placement with extensions expected) Day Rate: £450 CIS / Ltd (depending on experience) Requirement: National Grid Authorisation / Person Ticket essential Turner Lovell is partnering with a rapidly expanding specialist contractor operating within the UK high-voltage transmission sector. With a strong secured pipeline of National Grid substation works, they are now seeking an experienced M&E Site Supervisor with proven capability across GIS installations and SF6 gas systems. This position offers the chance to join a business in a clear growth phase, delivering complex substation upgrades and new build works across critical UK energy infrastructure. The successful individual will oversee mechanical and electrical site activities within HV substations, supporting delivery through installation, maintenance, refurbishment, and commissioning stages. A solid understanding of GIS equipment and SF6 handling procedures is a key requirement for this role. A strong balance of electrical and mechanical site supervision experience within high-voltage environments is essential, alongside a clear understanding of compliance, safety, and environmental responsibilities associated with SF6 systems. Key Responsibilities Lead M&E site supervision across HV substation projects throughout the UK Coordinate daily site operations, including direct labour, subcontractors, and specialist engineering teams Oversee installation, servicing, and refurbishment works on Gas Insulated Switchgear (GIS) Manage and supervise all SF6 gas-related activities, including: Gas transfer, filling, and recovery operations Leak identification, reporting, and corrective actions Routine gas testing, condition monitoring, and compliance verification Ensure all works are delivered in accordance with National Grid procedures, permits, and operational standards Maintain strict adherence to health, safety, and environmental regulations, with particular focus on SF6 control Work closely with client representatives, HSE teams, engineers, and commissioning personnel on site Track and report on site progress, productivity, and quality outputs to senior management Maintain accurate site records, including SF6 handling data and inspection results Assist in outage coordination, planning activities, and multi-discipline site delivery Promote and enforce high standards of safety, quality, and environmental performance across all site operations Requirements Demonstrable experience supervising UK high-voltage substation projects Strong capability across both electrical and mechanical site supervision Practical experience working with GIS systems and SF6 gas handling Sound understanding of F-Gas legislation and environmental compliance obligations Background within National Grid or comparable transmission environments Ability to interpret technical drawings, schematics, and engineering documentation Proven leadership experience managing multiple site teams and subcontractors Strong working knowledge of HSE regulations and HV safe systems of work Recognised site qualifications (SMSTS / SSSTS / CSCS / Safety Passport or equivalent) National Grid authorisation or eligibility to achieve authorisation Why This Role? Join a contractor experiencing strong and sustained growth in the HV transmission sector Work across a secured long-term pipeline of National Grid substation projects Be involved in technically demanding GIS and SF6-focused works Opportunity to develop within a business expanding its presence in the UK energy infrastructure market If you're available for your next assignment, please apply or contact Hope Brown - JBRP1_UKTJ
Jul 26, 2026
Full time
M&E Site Supervisor - HV Substations (GIS & SF6 Specialist) Location: UK Wide (National Grid Infrastructure Sites) Contract: Long-term programme of works (initial placement with extensions expected) Day Rate: £450 CIS / Ltd (depending on experience) Requirement: National Grid Authorisation / Person Ticket essential Turner Lovell is partnering with a rapidly expanding specialist contractor operating within the UK high-voltage transmission sector. With a strong secured pipeline of National Grid substation works, they are now seeking an experienced M&E Site Supervisor with proven capability across GIS installations and SF6 gas systems. This position offers the chance to join a business in a clear growth phase, delivering complex substation upgrades and new build works across critical UK energy infrastructure. The successful individual will oversee mechanical and electrical site activities within HV substations, supporting delivery through installation, maintenance, refurbishment, and commissioning stages. A solid understanding of GIS equipment and SF6 handling procedures is a key requirement for this role. A strong balance of electrical and mechanical site supervision experience within high-voltage environments is essential, alongside a clear understanding of compliance, safety, and environmental responsibilities associated with SF6 systems. Key Responsibilities Lead M&E site supervision across HV substation projects throughout the UK Coordinate daily site operations, including direct labour, subcontractors, and specialist engineering teams Oversee installation, servicing, and refurbishment works on Gas Insulated Switchgear (GIS) Manage and supervise all SF6 gas-related activities, including: Gas transfer, filling, and recovery operations Leak identification, reporting, and corrective actions Routine gas testing, condition monitoring, and compliance verification Ensure all works are delivered in accordance with National Grid procedures, permits, and operational standards Maintain strict adherence to health, safety, and environmental regulations, with particular focus on SF6 control Work closely with client representatives, HSE teams, engineers, and commissioning personnel on site Track and report on site progress, productivity, and quality outputs to senior management Maintain accurate site records, including SF6 handling data and inspection results Assist in outage coordination, planning activities, and multi-discipline site delivery Promote and enforce high standards of safety, quality, and environmental performance across all site operations Requirements Demonstrable experience supervising UK high-voltage substation projects Strong capability across both electrical and mechanical site supervision Practical experience working with GIS systems and SF6 gas handling Sound understanding of F-Gas legislation and environmental compliance obligations Background within National Grid or comparable transmission environments Ability to interpret technical drawings, schematics, and engineering documentation Proven leadership experience managing multiple site teams and subcontractors Strong working knowledge of HSE regulations and HV safe systems of work Recognised site qualifications (SMSTS / SSSTS / CSCS / Safety Passport or equivalent) National Grid authorisation or eligibility to achieve authorisation Why This Role? Join a contractor experiencing strong and sustained growth in the HV transmission sector Work across a secured long-term pipeline of National Grid substation projects Be involved in technically demanding GIS and SF6-focused works Opportunity to develop within a business expanding its presence in the UK energy infrastructure market If you're available for your next assignment, please apply or contact Hope Brown - JBRP1_UKTJ
M&E Site Supervisor - HV Substations (GIS & SF6 Specialist) Location: UK Wide (National Grid Infrastructure Sites) Contract: Long-term programme of works (initial placement with extensions expected) Day Rate: £450 CIS / Ltd (depending on experience) Requirement: National Grid Authorisation / Person Ticket essential Turner Lovell is partnering with a rapidly expanding specialist contractor operating within the UK high-voltage transmission sector. With a strong secured pipeline of National Grid substation works, they are now seeking an experienced M&E Site Supervisor with proven capability across GIS installations and SF6 gas systems. This position offers the chance to join a business in a clear growth phase, delivering complex substation upgrades and new build works across critical UK energy infrastructure. The successful individual will oversee mechanical and electrical site activities within HV substations, supporting delivery through installation, maintenance, refurbishment, and commissioning stages. A solid understanding of GIS equipment and SF6 handling procedures is a key requirement for this role. A strong balance of electrical and mechanical site supervision experience within high-voltage environments is essential, alongside a clear understanding of compliance, safety, and environmental responsibilities associated with SF6 systems. Key Responsibilities Lead M&E site supervision across HV substation projects throughout the UK Coordinate daily site operations, including direct labour, subcontractors, and specialist engineering teams Oversee installation, servicing, and refurbishment works on Gas Insulated Switchgear (GIS) Manage and supervise all SF6 gas-related activities, including: Gas transfer, filling, and recovery operations Leak identification, reporting, and corrective actions Routine gas testing, condition monitoring, and compliance verification Ensure all works are delivered in accordance with National Grid procedures, permits, and operational standards Maintain strict adherence to health, safety, and environmental regulations, with particular focus on SF6 control Work closely with client representatives, HSE teams, engineers, and commissioning personnel on site Track and report on site progress, productivity, and quality outputs to senior management Maintain accurate site records, including SF6 handling data and inspection results Assist in outage coordination, planning activities, and multi-discipline site delivery Promote and enforce high standards of safety, quality, and environmental performance across all site operations Requirements Demonstrable experience supervising UK high-voltage substation projects Strong capability across both electrical and mechanical site supervision Practical experience working with GIS systems and SF6 gas handling Sound understanding of F-Gas legislation and environmental compliance obligations Background within National Grid or comparable transmission environments Ability to interpret technical drawings, schematics, and engineering documentation Proven leadership experience managing multiple site teams and subcontractors Strong working knowledge of HSE regulations and HV safe systems of work Recognised site qualifications (SMSTS / SSSTS / CSCS / Safety Passport or equivalent) National Grid authorisation or eligibility to achieve authorisation Why This Role? Join a contractor experiencing strong and sustained growth in the HV transmission sector Work across a secured long-term pipeline of National Grid substation projects Be involved in technically demanding GIS and SF6-focused works Opportunity to develop within a business expanding its presence in the UK energy infrastructure market If you're available for your next assignment, please apply or contact Hope Brown - JBRP1_UKTJ
Jul 26, 2026
Full time
M&E Site Supervisor - HV Substations (GIS & SF6 Specialist) Location: UK Wide (National Grid Infrastructure Sites) Contract: Long-term programme of works (initial placement with extensions expected) Day Rate: £450 CIS / Ltd (depending on experience) Requirement: National Grid Authorisation / Person Ticket essential Turner Lovell is partnering with a rapidly expanding specialist contractor operating within the UK high-voltage transmission sector. With a strong secured pipeline of National Grid substation works, they are now seeking an experienced M&E Site Supervisor with proven capability across GIS installations and SF6 gas systems. This position offers the chance to join a business in a clear growth phase, delivering complex substation upgrades and new build works across critical UK energy infrastructure. The successful individual will oversee mechanical and electrical site activities within HV substations, supporting delivery through installation, maintenance, refurbishment, and commissioning stages. A solid understanding of GIS equipment and SF6 handling procedures is a key requirement for this role. A strong balance of electrical and mechanical site supervision experience within high-voltage environments is essential, alongside a clear understanding of compliance, safety, and environmental responsibilities associated with SF6 systems. Key Responsibilities Lead M&E site supervision across HV substation projects throughout the UK Coordinate daily site operations, including direct labour, subcontractors, and specialist engineering teams Oversee installation, servicing, and refurbishment works on Gas Insulated Switchgear (GIS) Manage and supervise all SF6 gas-related activities, including: Gas transfer, filling, and recovery operations Leak identification, reporting, and corrective actions Routine gas testing, condition monitoring, and compliance verification Ensure all works are delivered in accordance with National Grid procedures, permits, and operational standards Maintain strict adherence to health, safety, and environmental regulations, with particular focus on SF6 control Work closely with client representatives, HSE teams, engineers, and commissioning personnel on site Track and report on site progress, productivity, and quality outputs to senior management Maintain accurate site records, including SF6 handling data and inspection results Assist in outage coordination, planning activities, and multi-discipline site delivery Promote and enforce high standards of safety, quality, and environmental performance across all site operations Requirements Demonstrable experience supervising UK high-voltage substation projects Strong capability across both electrical and mechanical site supervision Practical experience working with GIS systems and SF6 gas handling Sound understanding of F-Gas legislation and environmental compliance obligations Background within National Grid or comparable transmission environments Ability to interpret technical drawings, schematics, and engineering documentation Proven leadership experience managing multiple site teams and subcontractors Strong working knowledge of HSE regulations and HV safe systems of work Recognised site qualifications (SMSTS / SSSTS / CSCS / Safety Passport or equivalent) National Grid authorisation or eligibility to achieve authorisation Why This Role? Join a contractor experiencing strong and sustained growth in the HV transmission sector Work across a secured long-term pipeline of National Grid substation projects Be involved in technically demanding GIS and SF6-focused works Opportunity to develop within a business expanding its presence in the UK energy infrastructure market If you're available for your next assignment, please apply or contact Hope Brown - JBRP1_UKTJ
Lead Software Engineer Hybrid Norwich This is an opportunity to join an innovative engineering company developing next-generation electric drive systems. You will take technical leadership of embedded software development across BSW and application layers, helping to define architecture and deliver robust, high-performance software for electric drive technologies from concept through to production. Responsibilities: Leading the design and development of embedded software across motor control, inverter control, DC-DC systems, diagnostics and related vehicle functions. Defining and maintaining software architecture aligned to system and product requirements. Driving full lifecycle delivery from requirements through implementation, verification, validation and release. Collaborating closely with systems, hardware, controls and test teams to ensure seamless integration and system performance. Overseeing software integration, bench testing, HIL validation and system-level debugging activities. Driving software quality, compliance and continuous improvement across tools, processes and standards. Requirements: Strong experience in embedded software development for electric drive, automotive or safety-critical systems. Proven ability to lead software teams and deliver complex embedded projects in a structured environment. Strong understanding of embedded architecture, real-time systems and control software integration. Experience with software verification and validation including unit, integration and system-level testing. Familiarity with ISO 26262, ASPICE, MISRA C and functional safety principles. Bonus Skills: Experience with motor control, inverter or power electronics software integration. Knowledge of model-based development, CI/CD, automated testing and configuration management. Experience working closely with hardware and controls teams in electrification or automotive systems. Apply now to join a highly innovative company operating at the forefront of electrification technology. Platform Recruitment: Platform Recruitment covers a wide range of IT and Engineering positions, including Electronics, Embedded Software, FPGA, Mechanical, C++, DevOps, Technical Sales, Project Management and more
Jul 26, 2026
Full time
Lead Software Engineer Hybrid Norwich This is an opportunity to join an innovative engineering company developing next-generation electric drive systems. You will take technical leadership of embedded software development across BSW and application layers, helping to define architecture and deliver robust, high-performance software for electric drive technologies from concept through to production. Responsibilities: Leading the design and development of embedded software across motor control, inverter control, DC-DC systems, diagnostics and related vehicle functions. Defining and maintaining software architecture aligned to system and product requirements. Driving full lifecycle delivery from requirements through implementation, verification, validation and release. Collaborating closely with systems, hardware, controls and test teams to ensure seamless integration and system performance. Overseeing software integration, bench testing, HIL validation and system-level debugging activities. Driving software quality, compliance and continuous improvement across tools, processes and standards. Requirements: Strong experience in embedded software development for electric drive, automotive or safety-critical systems. Proven ability to lead software teams and deliver complex embedded projects in a structured environment. Strong understanding of embedded architecture, real-time systems and control software integration. Experience with software verification and validation including unit, integration and system-level testing. Familiarity with ISO 26262, ASPICE, MISRA C and functional safety principles. Bonus Skills: Experience with motor control, inverter or power electronics software integration. Knowledge of model-based development, CI/CD, automated testing and configuration management. Experience working closely with hardware and controls teams in electrification or automotive systems. Apply now to join a highly innovative company operating at the forefront of electrification technology. Platform Recruitment: Platform Recruitment covers a wide range of IT and Engineering positions, including Electronics, Embedded Software, FPGA, Mechanical, C++, DevOps, Technical Sales, Project Management and more
M&E Site Supervisor - HV Substations (GIS & SF6 Specialist) Location: UK Wide (National Grid Infrastructure Sites) Contract: Long-term programme of works (initial placement with extensions expected) Day Rate: £450 CIS / Ltd (depending on experience) Requirement: National Grid Authorisation / Person Ticket essential Turner Lovell is partnering with a rapidly expanding specialist contractor operating within the UK high-voltage transmission sector. With a strong secured pipeline of National Grid substation works, they are now seeking an experienced M&E Site Supervisor with proven capability across GIS installations and SF6 gas systems. This position offers the chance to join a business in a clear growth phase, delivering complex substation upgrades and new build works across critical UK energy infrastructure. The successful individual will oversee mechanical and electrical site activities within HV substations, supporting delivery through installation, maintenance, refurbishment, and commissioning stages. A solid understanding of GIS equipment and SF6 handling procedures is a key requirement for this role. A strong balance of electrical and mechanical site supervision experience within high-voltage environments is essential, alongside a clear understanding of compliance, safety, and environmental responsibilities associated with SF6 systems. Key Responsibilities Lead M&E site supervision across HV substation projects throughout the UK Coordinate daily site operations, including direct labour, subcontractors, and specialist engineering teams Oversee installation, servicing, and refurbishment works on Gas Insulated Switchgear (GIS) Manage and supervise all SF6 gas-related activities, including: Gas transfer, filling, and recovery operations Leak identification, reporting, and corrective actions Routine gas testing, condition monitoring, and compliance verification Ensure all works are delivered in accordance with National Grid procedures, permits, and operational standards Maintain strict adherence to health, safety, and environmental regulations, with particular focus on SF6 control Work closely with client representatives, HSE teams, engineers, and commissioning personnel on site Track and report on site progress, productivity, and quality outputs to senior management Maintain accurate site records, including SF6 handling data and inspection results Assist in outage coordination, planning activities, and multi-discipline site delivery Promote and enforce high standards of safety, quality, and environmental performance across all site operations Requirements Demonstrable experience supervising UK high-voltage substation projects Strong capability across both electrical and mechanical site supervision Practical experience working with GIS systems and SF6 gas handling Sound understanding of F-Gas legislation and environmental compliance obligations Background within National Grid or comparable transmission environments Ability to interpret technical drawings, schematics, and engineering documentation Proven leadership experience managing multiple site teams and subcontractors Strong working knowledge of HSE regulations and HV safe systems of work Recognised site qualifications (SMSTS / SSSTS / CSCS / Safety Passport or equivalent) National Grid authorisation or eligibility to achieve authorisation Why This Role? Join a contractor experiencing strong and sustained growth in the HV transmission sector Work across a secured long-term pipeline of National Grid substation projects Be involved in technically demanding GIS and SF6-focused works Opportunity to develop within a business expanding its presence in the UK energy infrastructure market If you're available for your next assignment, please apply or contact Hope Brown - JBRP1_UKTJ
Jul 26, 2026
Full time
M&E Site Supervisor - HV Substations (GIS & SF6 Specialist) Location: UK Wide (National Grid Infrastructure Sites) Contract: Long-term programme of works (initial placement with extensions expected) Day Rate: £450 CIS / Ltd (depending on experience) Requirement: National Grid Authorisation / Person Ticket essential Turner Lovell is partnering with a rapidly expanding specialist contractor operating within the UK high-voltage transmission sector. With a strong secured pipeline of National Grid substation works, they are now seeking an experienced M&E Site Supervisor with proven capability across GIS installations and SF6 gas systems. This position offers the chance to join a business in a clear growth phase, delivering complex substation upgrades and new build works across critical UK energy infrastructure. The successful individual will oversee mechanical and electrical site activities within HV substations, supporting delivery through installation, maintenance, refurbishment, and commissioning stages. A solid understanding of GIS equipment and SF6 handling procedures is a key requirement for this role. A strong balance of electrical and mechanical site supervision experience within high-voltage environments is essential, alongside a clear understanding of compliance, safety, and environmental responsibilities associated with SF6 systems. Key Responsibilities Lead M&E site supervision across HV substation projects throughout the UK Coordinate daily site operations, including direct labour, subcontractors, and specialist engineering teams Oversee installation, servicing, and refurbishment works on Gas Insulated Switchgear (GIS) Manage and supervise all SF6 gas-related activities, including: Gas transfer, filling, and recovery operations Leak identification, reporting, and corrective actions Routine gas testing, condition monitoring, and compliance verification Ensure all works are delivered in accordance with National Grid procedures, permits, and operational standards Maintain strict adherence to health, safety, and environmental regulations, with particular focus on SF6 control Work closely with client representatives, HSE teams, engineers, and commissioning personnel on site Track and report on site progress, productivity, and quality outputs to senior management Maintain accurate site records, including SF6 handling data and inspection results Assist in outage coordination, planning activities, and multi-discipline site delivery Promote and enforce high standards of safety, quality, and environmental performance across all site operations Requirements Demonstrable experience supervising UK high-voltage substation projects Strong capability across both electrical and mechanical site supervision Practical experience working with GIS systems and SF6 gas handling Sound understanding of F-Gas legislation and environmental compliance obligations Background within National Grid or comparable transmission environments Ability to interpret technical drawings, schematics, and engineering documentation Proven leadership experience managing multiple site teams and subcontractors Strong working knowledge of HSE regulations and HV safe systems of work Recognised site qualifications (SMSTS / SSSTS / CSCS / Safety Passport or equivalent) National Grid authorisation or eligibility to achieve authorisation Why This Role? Join a contractor experiencing strong and sustained growth in the HV transmission sector Work across a secured long-term pipeline of National Grid substation projects Be involved in technically demanding GIS and SF6-focused works Opportunity to develop within a business expanding its presence in the UK energy infrastructure market If you're available for your next assignment, please apply or contact Hope Brown - JBRP1_UKTJ
Trainee Hardware Design Engineer (Wearables / MedTech) Dundee £30,000 - £35,000 + Training + Progression + Company Benefits Are you an Trainee Hardware Design Engineer or similar that wants to work with the go to names in IoT and Medtech industry alongside senior engineers that will provide one on one training to help springboard your career? Do you want to work on the latest cutting edge projects, surrounded by an elite team of technical experts that are solving some of the industry's most complex and technical challenges? This company offers a truly R&D focused environment where you will be tasked with designing the latest wearables, IoT devices, access control and the next generation of metering systems. This role is focussed on R&D for their latest product suite and future products due to be released for new industries like health & leisure, wearables & telecoms. This business has gone from strength to strength over the last decade and is quickly becoming one of Scotland's leading names in the Smart Energy, MedTech and Wearable devices. The ideal candidate will be someone that genuinely enjoys R&D projects, have experience in Altium for PCB design and be happy to manage the verification and validation for product releases. THE ROLE: Design and build of PCB's and Electrical systems for a range of IoT products Use Altium for PCB design and layouts Work alongside internal project managers to understand their requirements Work with the R&D Team to help build cutting edge automation products THE PERSON: Have experience writing code in PCB Design Experience with IoT Be able to commute to Dundee Reference: BBBH24715 If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Jul 26, 2026
Full time
Trainee Hardware Design Engineer (Wearables / MedTech) Dundee £30,000 - £35,000 + Training + Progression + Company Benefits Are you an Trainee Hardware Design Engineer or similar that wants to work with the go to names in IoT and Medtech industry alongside senior engineers that will provide one on one training to help springboard your career? Do you want to work on the latest cutting edge projects, surrounded by an elite team of technical experts that are solving some of the industry's most complex and technical challenges? This company offers a truly R&D focused environment where you will be tasked with designing the latest wearables, IoT devices, access control and the next generation of metering systems. This role is focussed on R&D for their latest product suite and future products due to be released for new industries like health & leisure, wearables & telecoms. This business has gone from strength to strength over the last decade and is quickly becoming one of Scotland's leading names in the Smart Energy, MedTech and Wearable devices. The ideal candidate will be someone that genuinely enjoys R&D projects, have experience in Altium for PCB design and be happy to manage the verification and validation for product releases. THE ROLE: Design and build of PCB's and Electrical systems for a range of IoT products Use Altium for PCB design and layouts Work alongside internal project managers to understand their requirements Work with the R&D Team to help build cutting edge automation products THE PERSON: Have experience writing code in PCB Design Experience with IoT Be able to commute to Dundee Reference: BBBH24715 If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
We are seeking a highly experienced and security-cleared Senior Systems engineer with a strong background in electrical engineering and test design. This contract role involves leading complex equipment work packages, managing suppliers and stakeholders, and ensuring delivery to time, cost, and quality standards. Key Responsibilities: Lead and manage equipment work packages, including planning, budgeting, and delivery oversight. Take full accountability for equipment requirements, hardware development, and lifecycle management. Produce and maintain Statements of Work for associated design authorities. Develop and update detailed activity plans for equipment delivery. Manage internal and external design authorities and suppliers, ensuring alignment with performance, cost, and quality targets. Conduct regular supplier engagement, including site visits as needed. Oversee equipment testing and compliance, including qualification and verification evidence reviews. Plan and execute design reviews and process gate reviews. Identify, assess, and manage risks and opportunities, implementing mitigation strategies. Maintain strong stakeholder relationships and ensure effective communication across project teams. Required Skills & Experience: Minimum 15 years of relevant experience in electrical engineering and test design. Proven track record in supplier and project management within complex engineering environments. Strong capabilities in requirements management and technical documentation. Experience managing equipment lifecycle from concept through delivery and testing. Excellent communication and stakeholder management skills. Current SC Clearance is essential. Ability to commute to Stevenage on a hybrid basis.
Jul 25, 2026
Full time
We are seeking a highly experienced and security-cleared Senior Systems engineer with a strong background in electrical engineering and test design. This contract role involves leading complex equipment work packages, managing suppliers and stakeholders, and ensuring delivery to time, cost, and quality standards. Key Responsibilities: Lead and manage equipment work packages, including planning, budgeting, and delivery oversight. Take full accountability for equipment requirements, hardware development, and lifecycle management. Produce and maintain Statements of Work for associated design authorities. Develop and update detailed activity plans for equipment delivery. Manage internal and external design authorities and suppliers, ensuring alignment with performance, cost, and quality targets. Conduct regular supplier engagement, including site visits as needed. Oversee equipment testing and compliance, including qualification and verification evidence reviews. Plan and execute design reviews and process gate reviews. Identify, assess, and manage risks and opportunities, implementing mitigation strategies. Maintain strong stakeholder relationships and ensure effective communication across project teams. Required Skills & Experience: Minimum 15 years of relevant experience in electrical engineering and test design. Proven track record in supplier and project management within complex engineering environments. Strong capabilities in requirements management and technical documentation. Experience managing equipment lifecycle from concept through delivery and testing. Excellent communication and stakeholder management skills. Current SC Clearance is essential. Ability to commute to Stevenage on a hybrid basis.
M&E Site Supervisor - HV Substations (GIS & SF6 Specialist) Location: UK Wide (National Grid Infrastructure Sites) Contract: Long-term programme of works (initial placement with extensions expected) Day Rate: £450 CIS / Ltd (depending on experience) Requirement: National Grid Authorisation / Person Ticket essential Turner Lovell is partnering with a rapidly expanding specialist contractor operating within the UK high-voltage transmission sector. With a strong secured pipeline of National Grid substation works, they are now seeking an experienced M&E Site Supervisor with proven capability across GIS installations and SF6 gas systems. This position offers the chance to join a business in a clear growth phase, delivering complex substation upgrades and new build works across critical UK energy infrastructure. The successful individual will oversee mechanical and electrical site activities within HV substations, supporting delivery through installation, maintenance, refurbishment, and commissioning stages. A solid understanding of GIS equipment and SF6 handling procedures is a key requirement for this role. A strong balance of electrical and mechanical site supervision experience within high-voltage environments is essential, alongside a clear understanding of compliance, safety, and environmental responsibilities associated with SF6 systems. Key Responsibilities Lead M&E site supervision across HV substation projects throughout the UK Coordinate daily site operations, including direct labour, subcontractors, and specialist engineering teams Oversee installation, servicing, and refurbishment works on Gas Insulated Switchgear (GIS) Manage and supervise all SF6 gas-related activities, including: Gas transfer, filling, and recovery operations Leak identification, reporting, and corrective actions Routine gas testing, condition monitoring, and compliance verification Ensure all works are delivered in accordance with National Grid procedures, permits, and operational standards Maintain strict adherence to health, safety, and environmental regulations, with particular focus on SF6 control Work closely with client representatives, HSE teams, engineers, and commissioning personnel on site Track and report on site progress, productivity, and quality outputs to senior management Maintain accurate site records, including SF6 handling data and inspection results Assist in outage coordination, planning activities, and multi-discipline site delivery Promote and enforce high standards of safety, quality, and environmental performance across all site operations Requirements Demonstrable experience supervising UK high-voltage substation projects Strong capability across both electrical and mechanical site supervision Practical experience working with GIS systems and SF6 gas handling Sound understanding of F-Gas legislation and environmental compliance obligations Background within National Grid or comparable transmission environments Ability to interpret technical drawings, schematics, and engineering documentation Proven leadership experience managing multiple site teams and subcontractors Strong working knowledge of HSE regulations and HV safe systems of work Recognised site qualifications (SMSTS / SSSTS / CSCS / Safety Passport or equivalent) National Grid authorisation or eligibility to achieve authorisation Why This Role? Join a contractor experiencing strong and sustained growth in the HV transmission sector Work across a secured long-term pipeline of National Grid substation projects Be involved in technically demanding GIS and SF6-focused works Opportunity to develop within a business expanding its presence in the UK energy infrastructure market If you're available for your next assignment, please apply or contact Hope Brown - JBRP1_UKTJ
Jul 25, 2026
Full time
M&E Site Supervisor - HV Substations (GIS & SF6 Specialist) Location: UK Wide (National Grid Infrastructure Sites) Contract: Long-term programme of works (initial placement with extensions expected) Day Rate: £450 CIS / Ltd (depending on experience) Requirement: National Grid Authorisation / Person Ticket essential Turner Lovell is partnering with a rapidly expanding specialist contractor operating within the UK high-voltage transmission sector. With a strong secured pipeline of National Grid substation works, they are now seeking an experienced M&E Site Supervisor with proven capability across GIS installations and SF6 gas systems. This position offers the chance to join a business in a clear growth phase, delivering complex substation upgrades and new build works across critical UK energy infrastructure. The successful individual will oversee mechanical and electrical site activities within HV substations, supporting delivery through installation, maintenance, refurbishment, and commissioning stages. A solid understanding of GIS equipment and SF6 handling procedures is a key requirement for this role. A strong balance of electrical and mechanical site supervision experience within high-voltage environments is essential, alongside a clear understanding of compliance, safety, and environmental responsibilities associated with SF6 systems. Key Responsibilities Lead M&E site supervision across HV substation projects throughout the UK Coordinate daily site operations, including direct labour, subcontractors, and specialist engineering teams Oversee installation, servicing, and refurbishment works on Gas Insulated Switchgear (GIS) Manage and supervise all SF6 gas-related activities, including: Gas transfer, filling, and recovery operations Leak identification, reporting, and corrective actions Routine gas testing, condition monitoring, and compliance verification Ensure all works are delivered in accordance with National Grid procedures, permits, and operational standards Maintain strict adherence to health, safety, and environmental regulations, with particular focus on SF6 control Work closely with client representatives, HSE teams, engineers, and commissioning personnel on site Track and report on site progress, productivity, and quality outputs to senior management Maintain accurate site records, including SF6 handling data and inspection results Assist in outage coordination, planning activities, and multi-discipline site delivery Promote and enforce high standards of safety, quality, and environmental performance across all site operations Requirements Demonstrable experience supervising UK high-voltage substation projects Strong capability across both electrical and mechanical site supervision Practical experience working with GIS systems and SF6 gas handling Sound understanding of F-Gas legislation and environmental compliance obligations Background within National Grid or comparable transmission environments Ability to interpret technical drawings, schematics, and engineering documentation Proven leadership experience managing multiple site teams and subcontractors Strong working knowledge of HSE regulations and HV safe systems of work Recognised site qualifications (SMSTS / SSSTS / CSCS / Safety Passport or equivalent) National Grid authorisation or eligibility to achieve authorisation Why This Role? Join a contractor experiencing strong and sustained growth in the HV transmission sector Work across a secured long-term pipeline of National Grid substation projects Be involved in technically demanding GIS and SF6-focused works Opportunity to develop within a business expanding its presence in the UK energy infrastructure market If you're available for your next assignment, please apply or contact Hope Brown - JBRP1_UKTJ
M&E Site Supervisor - HV Substations (GIS & SF6 Specialist) Location: UK Wide (National Grid Infrastructure Sites) Contract: Long-term programme of works (initial placement with extensions expected) Day Rate: £450 CIS / Ltd (depending on experience) Requirement: National Grid Authorisation / Person Ticket essential Turner Lovell is partnering with a rapidly expanding specialist contractor operating within the UK high-voltage transmission sector. With a strong secured pipeline of National Grid substation works, they are now seeking an experienced M&E Site Supervisor with proven capability across GIS installations and SF6 gas systems. This position offers the chance to join a business in a clear growth phase, delivering complex substation upgrades and new build works across critical UK energy infrastructure. The successful individual will oversee mechanical and electrical site activities within HV substations, supporting delivery through installation, maintenance, refurbishment, and commissioning stages. A solid understanding of GIS equipment and SF6 handling procedures is a key requirement for this role. A strong balance of electrical and mechanical site supervision experience within high-voltage environments is essential, alongside a clear understanding of compliance, safety, and environmental responsibilities associated with SF6 systems. Key Responsibilities Lead M&E site supervision across HV substation projects throughout the UK Coordinate daily site operations, including direct labour, subcontractors, and specialist engineering teams Oversee installation, servicing, and refurbishment works on Gas Insulated Switchgear (GIS) Manage and supervise all SF6 gas-related activities, including: Gas transfer, filling, and recovery operations Leak identification, reporting, and corrective actions Routine gas testing, condition monitoring, and compliance verification Ensure all works are delivered in accordance with National Grid procedures, permits, and operational standards Maintain strict adherence to health, safety, and environmental regulations, with particular focus on SF6 control Work closely with client representatives, HSE teams, engineers, and commissioning personnel on site Track and report on site progress, productivity, and quality outputs to senior management Maintain accurate site records, including SF6 handling data and inspection results Assist in outage coordination, planning activities, and multi-discipline site delivery Promote and enforce high standards of safety, quality, and environmental performance across all site operations Requirements Demonstrable experience supervising UK high-voltage substation projects Strong capability across both electrical and mechanical site supervision Practical experience working with GIS systems and SF6 gas handling Sound understanding of F-Gas legislation and environmental compliance obligations Background within National Grid or comparable transmission environments Ability to interpret technical drawings, schematics, and engineering documentation Proven leadership experience managing multiple site teams and subcontractors Strong working knowledge of HSE regulations and HV safe systems of work Recognised site qualifications (SMSTS / SSSTS / CSCS / Safety Passport or equivalent) National Grid authorisation or eligibility to achieve authorisation Why This Role? Join a contractor experiencing strong and sustained growth in the HV transmission sector Work across a secured long-term pipeline of National Grid substation projects Be involved in technically demanding GIS and SF6-focused works Opportunity to develop within a business expanding its presence in the UK energy infrastructure market If you're available for your next assignment, please apply or contact Hope Brown - JBRP1_UKTJ
Jul 25, 2026
Full time
M&E Site Supervisor - HV Substations (GIS & SF6 Specialist) Location: UK Wide (National Grid Infrastructure Sites) Contract: Long-term programme of works (initial placement with extensions expected) Day Rate: £450 CIS / Ltd (depending on experience) Requirement: National Grid Authorisation / Person Ticket essential Turner Lovell is partnering with a rapidly expanding specialist contractor operating within the UK high-voltage transmission sector. With a strong secured pipeline of National Grid substation works, they are now seeking an experienced M&E Site Supervisor with proven capability across GIS installations and SF6 gas systems. This position offers the chance to join a business in a clear growth phase, delivering complex substation upgrades and new build works across critical UK energy infrastructure. The successful individual will oversee mechanical and electrical site activities within HV substations, supporting delivery through installation, maintenance, refurbishment, and commissioning stages. A solid understanding of GIS equipment and SF6 handling procedures is a key requirement for this role. A strong balance of electrical and mechanical site supervision experience within high-voltage environments is essential, alongside a clear understanding of compliance, safety, and environmental responsibilities associated with SF6 systems. Key Responsibilities Lead M&E site supervision across HV substation projects throughout the UK Coordinate daily site operations, including direct labour, subcontractors, and specialist engineering teams Oversee installation, servicing, and refurbishment works on Gas Insulated Switchgear (GIS) Manage and supervise all SF6 gas-related activities, including: Gas transfer, filling, and recovery operations Leak identification, reporting, and corrective actions Routine gas testing, condition monitoring, and compliance verification Ensure all works are delivered in accordance with National Grid procedures, permits, and operational standards Maintain strict adherence to health, safety, and environmental regulations, with particular focus on SF6 control Work closely with client representatives, HSE teams, engineers, and commissioning personnel on site Track and report on site progress, productivity, and quality outputs to senior management Maintain accurate site records, including SF6 handling data and inspection results Assist in outage coordination, planning activities, and multi-discipline site delivery Promote and enforce high standards of safety, quality, and environmental performance across all site operations Requirements Demonstrable experience supervising UK high-voltage substation projects Strong capability across both electrical and mechanical site supervision Practical experience working with GIS systems and SF6 gas handling Sound understanding of F-Gas legislation and environmental compliance obligations Background within National Grid or comparable transmission environments Ability to interpret technical drawings, schematics, and engineering documentation Proven leadership experience managing multiple site teams and subcontractors Strong working knowledge of HSE regulations and HV safe systems of work Recognised site qualifications (SMSTS / SSSTS / CSCS / Safety Passport or equivalent) National Grid authorisation or eligibility to achieve authorisation Why This Role? Join a contractor experiencing strong and sustained growth in the HV transmission sector Work across a secured long-term pipeline of National Grid substation projects Be involved in technically demanding GIS and SF6-focused works Opportunity to develop within a business expanding its presence in the UK energy infrastructure market If you're available for your next assignment, please apply or contact Hope Brown - JBRP1_UKTJ
MEP Pre-Construction Manager Padstone require a sharp, commercially minded MEP Pre-Construction Manager to join a well known M&E clients London team. Manager to complete ownership of the MEP pre-construction phase for washroom packages. This is not a standard, generic fit-out role. You will specialise in high-density services, ensuring that complex public health drainage, hot/cold water distribution, specialise extract ventilation, Electrical services and smart lighting systems are perfectly coordinated, budgeted, and procured before site works commence. Key Responsibilities Washroom Design Coordination & BIM Review Interrogate layouts : Review architectural concepts to ensure MEP services can physically fit within tight ceiling voids, IPS panel cavities, and vanity units. (Rudwall Systems) Lead spatial coordination : Use BIM software to map out complex public health drainage gradients and manifold systems, eliminating clashes before manufacturing. Manage client variations : Fast-track technical revisions when clients request high-end modifications to brassware, sensor technologies, or branding. Interrogate documentation and specifications to ensure project compliance. Attend design meetings taking lead where necessary with coordination and resolving issues Liaise with external design consultants to understand how specifications and timelines are managed. Track deliverables and following up on outstanding design items Manage the flow of updated drawings and maintain drawing registers where needed. Prepare technical and sample submittals for review by senior engineers. Check compliance with project standards and manufacturer specifications. Effectively communicate and collaborate within multidisciplinary teams. Manage design and scope changes. Attend Factory Witness Tests (FATs) and Mock-up reviews when appropriate to observe and understand performance verification procedures. Estimating & Value Engineering Assist the commercial Team with the following. Assist in tracking project changes and variations in collaboration with the QS and engineering team. Build precise cost models : Produce accurate MEP estimates specifically tailored to fast-track, high-finish commercial washroom projects. Drive value engineering : Suggest smart alternatives for plant equipment and sanitaryware systems to optimize budgets without losing premium aesthetic appeal. Assess infrastructure : Review existing landlord services and incoming utility capacities to verify they can support the new washroom configurations. Procurement & Subcontractor Tendering Scope turnkey packages : Define precise packages of work for specialized MEP subcontractors (such as public health plumbers, commercial electricians, and commissioning engineers). Level trade tenders : Execute strict like for like comparisons for commercial and technical reviews of all subcontractor returns. Source long-lead items : Secure early procurement for critical, long-lead items like specialized sensor-tap control blocks, bespoke vanity lighting, and commercial booster pumps. Candidate Requirements- Essential Experience & Qualifications London fit-out track record : Minimum 3-5+ years of pre-construction, estimating, or design coordination experience within the London fit-out sector (washroom, commercial CAT B, or hospitality experience is highly advantageous). Technical background : Strong foundation in Building Services Engineering (Mechanical, Electrical, or Public Health/Plumbing bias). Fast-track delivery knowledge : Deep understanding of turnkey, fast-paced project environments where pre-construction accuracy directly dictates on-site speed. Technical & Software Skills BIM / CAD capability : Confident navigating, interrogating, and marking up 2D drawings and 3D models (Navisworks/Revit/AutoCAD). Applicant to have existing skills and knowledge of Excel, Word and Bluebeam. Previous knowledge/Experience of Asite, Aconex and/or Viewpoint, BIMcollab and Revizto Regulations expert : Thorough knowledge of UK Building Regulations (specifically Part G for sanitation, Part L for conservation of fuel and power, and Part F for ventilation). If available and experienced in M&E site and project management please send a cv and call (phone number removed) now.
Jul 25, 2026
Full time
MEP Pre-Construction Manager Padstone require a sharp, commercially minded MEP Pre-Construction Manager to join a well known M&E clients London team. Manager to complete ownership of the MEP pre-construction phase for washroom packages. This is not a standard, generic fit-out role. You will specialise in high-density services, ensuring that complex public health drainage, hot/cold water distribution, specialise extract ventilation, Electrical services and smart lighting systems are perfectly coordinated, budgeted, and procured before site works commence. Key Responsibilities Washroom Design Coordination & BIM Review Interrogate layouts : Review architectural concepts to ensure MEP services can physically fit within tight ceiling voids, IPS panel cavities, and vanity units. (Rudwall Systems) Lead spatial coordination : Use BIM software to map out complex public health drainage gradients and manifold systems, eliminating clashes before manufacturing. Manage client variations : Fast-track technical revisions when clients request high-end modifications to brassware, sensor technologies, or branding. Interrogate documentation and specifications to ensure project compliance. Attend design meetings taking lead where necessary with coordination and resolving issues Liaise with external design consultants to understand how specifications and timelines are managed. Track deliverables and following up on outstanding design items Manage the flow of updated drawings and maintain drawing registers where needed. Prepare technical and sample submittals for review by senior engineers. Check compliance with project standards and manufacturer specifications. Effectively communicate and collaborate within multidisciplinary teams. Manage design and scope changes. Attend Factory Witness Tests (FATs) and Mock-up reviews when appropriate to observe and understand performance verification procedures. Estimating & Value Engineering Assist the commercial Team with the following. Assist in tracking project changes and variations in collaboration with the QS and engineering team. Build precise cost models : Produce accurate MEP estimates specifically tailored to fast-track, high-finish commercial washroom projects. Drive value engineering : Suggest smart alternatives for plant equipment and sanitaryware systems to optimize budgets without losing premium aesthetic appeal. Assess infrastructure : Review existing landlord services and incoming utility capacities to verify they can support the new washroom configurations. Procurement & Subcontractor Tendering Scope turnkey packages : Define precise packages of work for specialized MEP subcontractors (such as public health plumbers, commercial electricians, and commissioning engineers). Level trade tenders : Execute strict like for like comparisons for commercial and technical reviews of all subcontractor returns. Source long-lead items : Secure early procurement for critical, long-lead items like specialized sensor-tap control blocks, bespoke vanity lighting, and commercial booster pumps. Candidate Requirements- Essential Experience & Qualifications London fit-out track record : Minimum 3-5+ years of pre-construction, estimating, or design coordination experience within the London fit-out sector (washroom, commercial CAT B, or hospitality experience is highly advantageous). Technical background : Strong foundation in Building Services Engineering (Mechanical, Electrical, or Public Health/Plumbing bias). Fast-track delivery knowledge : Deep understanding of turnkey, fast-paced project environments where pre-construction accuracy directly dictates on-site speed. Technical & Software Skills BIM / CAD capability : Confident navigating, interrogating, and marking up 2D drawings and 3D models (Navisworks/Revit/AutoCAD). Applicant to have existing skills and knowledge of Excel, Word and Bluebeam. Previous knowledge/Experience of Asite, Aconex and/or Viewpoint, BIMcollab and Revizto Regulations expert : Thorough knowledge of UK Building Regulations (specifically Part G for sanitation, Part L for conservation of fuel and power, and Part F for ventilation). If available and experienced in M&E site and project management please send a cv and call (phone number removed) now.
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our Sensor Systems Business Unit. Saab is expanding in the UK and we are now seeking talented and highly motivated Systems Engineer to support our radar and sensors growth activities at either our Fareham campus. Much of our current work is centred on the G1X radar, which is the newest radar in Saab's portfolio - a software defined radar with a regular capability update cycle post-delivery, as well as an established production line. As a Systems Engineer you will regularly work with current products, developing enhancements and investigating new areas for product growth. Key Responsibilities: As a System Engineer you will be responsible for various activities across the product lifecycle. Responsibilities include: Support bid activities Requirements management activities Radar performance analysis Radar algorithm development System and sub-system design Support to customer demonstrations Travel within UK and abroad (including to Gothenburg office) Required Skills: As a person you are positive, social, results oriented and a team player with a proven background in systems engineering Hold a Bachelors degree or equivalent Experience of radar, communications or EW systems is essential Experience of working with MATLAB, ideally working with recorded radar data Experience of working in a recognised industry standard requirements management tool Familiar with principles of 15288:2023 Familiar with product road mapping and product lifecycle techniques Enjoy working and developing in a team Like cooperating with others but are capable of working individually as well Good technical communication skills During your employment you will handle tasks and materials that are classified as military secret and therefore you must have a UK or Swedish citizenship As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. JBRP1_UKTJ
Jul 25, 2026
Full time
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our Sensor Systems Business Unit. Saab is expanding in the UK and we are now seeking talented and highly motivated Systems Engineer to support our radar and sensors growth activities at either our Fareham campus. Much of our current work is centred on the G1X radar, which is the newest radar in Saab's portfolio - a software defined radar with a regular capability update cycle post-delivery, as well as an established production line. As a Systems Engineer you will regularly work with current products, developing enhancements and investigating new areas for product growth. Key Responsibilities: As a System Engineer you will be responsible for various activities across the product lifecycle. Responsibilities include: Support bid activities Requirements management activities Radar performance analysis Radar algorithm development System and sub-system design Support to customer demonstrations Travel within UK and abroad (including to Gothenburg office) Required Skills: As a person you are positive, social, results oriented and a team player with a proven background in systems engineering Hold a Bachelors degree or equivalent Experience of radar, communications or EW systems is essential Experience of working with MATLAB, ideally working with recorded radar data Experience of working in a recognised industry standard requirements management tool Familiar with principles of 15288:2023 Familiar with product road mapping and product lifecycle techniques Enjoy working and developing in a team Like cooperating with others but are capable of working individually as well Good technical communication skills During your employment you will handle tasks and materials that are classified as military secret and therefore you must have a UK or Swedish citizenship As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. JBRP1_UKTJ
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our Sensor Systems Business Unit. Saab is expanding in the UK and we are now seeking talented and highly motivated Systems Engineer to support our radar and sensors growth activities at either our Fareham campus. Much of our current work is centred on the G1X radar, which is the newest radar in Saab's portfolio - a software defined radar with a regular capability update cycle post-delivery, as well as an established production line. As a Systems Engineer you will regularly work with current products, developing enhancements and investigating new areas for product growth. Key Responsibilities: As a System Engineer you will be responsible for various activities across the product lifecycle. Responsibilities include: Support bid activities Requirements management activities Radar performance analysis Radar algorithm development System and sub-system design Support to customer demonstrations Travel within UK and abroad (including to Gothenburg office) Required Skills: As a person you are positive, social, results oriented and a team player with a proven background in systems engineering Hold a Bachelors degree or equivalent Experience of radar, communications or EW systems is essential Experience of working with MATLAB, ideally working with recorded radar data Experience of working in a recognised industry standard requirements management tool Familiar with principles of 15288:2023 Familiar with product road mapping and product lifecycle techniques Enjoy working and developing in a team Like cooperating with others but are capable of working individually as well Good technical communication skills During your employment you will handle tasks and materials that are classified as military secret and therefore you must have a UK or Swedish citizenship As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. JBRP1_UKTJ
Jul 25, 2026
Full time
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our Sensor Systems Business Unit. Saab is expanding in the UK and we are now seeking talented and highly motivated Systems Engineer to support our radar and sensors growth activities at either our Fareham campus. Much of our current work is centred on the G1X radar, which is the newest radar in Saab's portfolio - a software defined radar with a regular capability update cycle post-delivery, as well as an established production line. As a Systems Engineer you will regularly work with current products, developing enhancements and investigating new areas for product growth. Key Responsibilities: As a System Engineer you will be responsible for various activities across the product lifecycle. Responsibilities include: Support bid activities Requirements management activities Radar performance analysis Radar algorithm development System and sub-system design Support to customer demonstrations Travel within UK and abroad (including to Gothenburg office) Required Skills: As a person you are positive, social, results oriented and a team player with a proven background in systems engineering Hold a Bachelors degree or equivalent Experience of radar, communications or EW systems is essential Experience of working with MATLAB, ideally working with recorded radar data Experience of working in a recognised industry standard requirements management tool Familiar with principles of 15288:2023 Familiar with product road mapping and product lifecycle techniques Enjoy working and developing in a team Like cooperating with others but are capable of working individually as well Good technical communication skills During your employment you will handle tasks and materials that are classified as military secret and therefore you must have a UK or Swedish citizenship As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. JBRP1_UKTJ
Job Title: Quality Manager Location: Southend Remuneration: Up to £50,000 per annum Contract Details: Permanent, Full Time Are you ready to take the lead in quality assurance? Our client is seeking an experienced Quality Manager who is passionate about maintaining excellence in manufacturing processes. This is your chance to shine in a pivotal role that directly influences quality and compliance! Responsibilities: Oversee the management and maintenance of Quality Management Systems, ensuring adherence to ISO 9100/AS9100 standards. Lead the Inspection team, serving as the company's management representative in all quality matters. Ensure all calibration, testing, and qualification activities meet business standards and customer requirements. Conduct inspection and verification of parts at various stages of production. Maintain calibrated equipment in readiness for manufacturing. Train staff in VisualFAIR software as per Customer/Design Authority Approval Requirements. Create and approve First Article Inspection Reports (FAIR) and Layout Inspection Reports (LAIR) to specification. Plan and conduct internal and external audits to ISO9100 and AS9100 standards. Drive continuous improvement within your team, identifying performance concerns and development opportunities. Communicate daily workload effectively, ensuring discipline and teamwork. Participate in management review meetings, collaborating with the Production Team. Core Skills/Attributes Needed: Ability to interpret engineering drawings and specifications. Expertise in First Article Inspection (FAIR/LAIR). Qualified to conduct internal/external audits. Strong initiative, time management, and attention to detail. Excellent communication and collaboration skills. If you're an ambitious Quality Manager looking for a dynamic environment to grow your career, we want to hear from you! Join our client's team and help shape the future of aerospace quality management. Apply today! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Jul 24, 2026
Full time
Job Title: Quality Manager Location: Southend Remuneration: Up to £50,000 per annum Contract Details: Permanent, Full Time Are you ready to take the lead in quality assurance? Our client is seeking an experienced Quality Manager who is passionate about maintaining excellence in manufacturing processes. This is your chance to shine in a pivotal role that directly influences quality and compliance! Responsibilities: Oversee the management and maintenance of Quality Management Systems, ensuring adherence to ISO 9100/AS9100 standards. Lead the Inspection team, serving as the company's management representative in all quality matters. Ensure all calibration, testing, and qualification activities meet business standards and customer requirements. Conduct inspection and verification of parts at various stages of production. Maintain calibrated equipment in readiness for manufacturing. Train staff in VisualFAIR software as per Customer/Design Authority Approval Requirements. Create and approve First Article Inspection Reports (FAIR) and Layout Inspection Reports (LAIR) to specification. Plan and conduct internal and external audits to ISO9100 and AS9100 standards. Drive continuous improvement within your team, identifying performance concerns and development opportunities. Communicate daily workload effectively, ensuring discipline and teamwork. Participate in management review meetings, collaborating with the Production Team. Core Skills/Attributes Needed: Ability to interpret engineering drawings and specifications. Expertise in First Article Inspection (FAIR/LAIR). Qualified to conduct internal/external audits. Strong initiative, time management, and attention to detail. Excellent communication and collaboration skills. If you're an ambitious Quality Manager looking for a dynamic environment to grow your career, we want to hear from you! Join our client's team and help shape the future of aerospace quality management. Apply today! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our Sensor Systems Business Unit. Saab is expanding in the UK and we are now seeking talented and highly motivated Systems Engineer to support our radar and sensors growth activities at either our Fareham campus. Much of our current work is centred on the G1X radar, which is the newest radar in Saab's portfolio - a software defined radar with a regular capability update cycle post-delivery, as well as an established production line. As a Systems Engineer you will regularly work with current products, developing enhancements and investigating new areas for product growth. Key Responsibilities: As a System Engineer you will be responsible for various activities across the product lifecycle. Responsibilities include: Support bid activities Requirements management activities Radar performance analysis Radar algorithm development System and sub-system design Support to customer demonstrations Travel within UK and abroad (including to Gothenburg office) Required Skills: As a person you are positive, social, results oriented and a team player with a proven background in systems engineering Hold a Bachelors degree or equivalent Experience of radar, communications or EW systems is essential Experience of working with MATLAB, ideally working with recorded radar data Experience of working in a recognised industry standard requirements management tool Familiar with principles of 15288:2023 Familiar with product road mapping and product lifecycle techniques Enjoy working and developing in a team Like cooperating with others but are capable of working individually as well Good technical communication skills During your employment you will handle tasks and materials that are classified as military secret and therefore you must have a UK or Swedish citizenship As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Jul 24, 2026
Full time
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our Sensor Systems Business Unit. Saab is expanding in the UK and we are now seeking talented and highly motivated Systems Engineer to support our radar and sensors growth activities at either our Fareham campus. Much of our current work is centred on the G1X radar, which is the newest radar in Saab's portfolio - a software defined radar with a regular capability update cycle post-delivery, as well as an established production line. As a Systems Engineer you will regularly work with current products, developing enhancements and investigating new areas for product growth. Key Responsibilities: As a System Engineer you will be responsible for various activities across the product lifecycle. Responsibilities include: Support bid activities Requirements management activities Radar performance analysis Radar algorithm development System and sub-system design Support to customer demonstrations Travel within UK and abroad (including to Gothenburg office) Required Skills: As a person you are positive, social, results oriented and a team player with a proven background in systems engineering Hold a Bachelors degree or equivalent Experience of radar, communications or EW systems is essential Experience of working with MATLAB, ideally working with recorded radar data Experience of working in a recognised industry standard requirements management tool Familiar with principles of 15288:2023 Familiar with product road mapping and product lifecycle techniques Enjoy working and developing in a team Like cooperating with others but are capable of working individually as well Good technical communication skills During your employment you will handle tasks and materials that are classified as military secret and therefore you must have a UK or Swedish citizenship As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Jonathan Lee Recruitment Ltd
Battlefield, Shropshire
NEW VACANCY - TECHNICAL MANAGER (FOOD INDUSTRY) Are you an experienced Technical Manager seeking a new job opportunity, do you have previous experience from within the food manufacturing industry and do you live in Shropshire?! We are actively looking for a Technical Manager to join a leading food manufacturer based in Shrewsbury (Shropshire), the working hours for this role are day shifts Monday to Friday (40 hours per week), and the annual salary is up to £55,000 per annum (DOE). The hiring manager would prefer someone who has previously worked with red or white meat, but they will consider people who have worked with other products within the food manufacturing sector. A qualification in a food related subject would be highly advantageous, but is not essential. What You Will Do: Lead the Food Safety Culture and develop, maintain, and improve the Food Safety & Quality Management plan to ensure full adherence to industry standards and regulatory requirements. Take ownership of the site's Food Safety & Quality Management System, driving continuous improvement initiatives that strengthen compliance and operational quality. Provide leadership to the QA team and support wider site teams by identifying training needs, coaching effectively, and building strong working relationships. Lead on certification standards, FSS and customer audits, ensuring compliance with regulatory, certification, and customer expectations. Manage customer relationships by ensuring complaints are addressed promptly and close out actions are completed against agreed targets. Serve as HACCP Team Leader and TACCP Team Leader, maintaining robust validation and verification of process compliance so production meets quality standards and import requirements. What You Will Bring: Previous experience from within the Food Manufacturing industry - ESSENTIAL Strong communication and organisational skills, with the ability to delegate, influence, and drive results across multiple stakeholders. Confidence leading audits, managing customer requirements, and supporting continuous improvement through clear technical reporting. Desirable: A food-related qualification such as Food Technology or Food Science Experience with Red or White meat This Technical Manager role directly supports the company's drive for excellence in meat processing by strengthening the quality and compliance framework, protecting integrity across operations, and ensuring customer standards are consistently met. Location: This role is based in Shrewsbury (Shropshire). Interested?: If Technical Manager work in food safety, quality systems, and audit readiness is where strengths really shine, apply now and take the opportunity to make an immediate, positive impact in this Technical Manager role. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Jul 24, 2026
Full time
NEW VACANCY - TECHNICAL MANAGER (FOOD INDUSTRY) Are you an experienced Technical Manager seeking a new job opportunity, do you have previous experience from within the food manufacturing industry and do you live in Shropshire?! We are actively looking for a Technical Manager to join a leading food manufacturer based in Shrewsbury (Shropshire), the working hours for this role are day shifts Monday to Friday (40 hours per week), and the annual salary is up to £55,000 per annum (DOE). The hiring manager would prefer someone who has previously worked with red or white meat, but they will consider people who have worked with other products within the food manufacturing sector. A qualification in a food related subject would be highly advantageous, but is not essential. What You Will Do: Lead the Food Safety Culture and develop, maintain, and improve the Food Safety & Quality Management plan to ensure full adherence to industry standards and regulatory requirements. Take ownership of the site's Food Safety & Quality Management System, driving continuous improvement initiatives that strengthen compliance and operational quality. Provide leadership to the QA team and support wider site teams by identifying training needs, coaching effectively, and building strong working relationships. Lead on certification standards, FSS and customer audits, ensuring compliance with regulatory, certification, and customer expectations. Manage customer relationships by ensuring complaints are addressed promptly and close out actions are completed against agreed targets. Serve as HACCP Team Leader and TACCP Team Leader, maintaining robust validation and verification of process compliance so production meets quality standards and import requirements. What You Will Bring: Previous experience from within the Food Manufacturing industry - ESSENTIAL Strong communication and organisational skills, with the ability to delegate, influence, and drive results across multiple stakeholders. Confidence leading audits, managing customer requirements, and supporting continuous improvement through clear technical reporting. Desirable: A food-related qualification such as Food Technology or Food Science Experience with Red or White meat This Technical Manager role directly supports the company's drive for excellence in meat processing by strengthening the quality and compliance framework, protecting integrity across operations, and ensuring customer standards are consistently met. Location: This role is based in Shrewsbury (Shropshire). Interested?: If Technical Manager work in food safety, quality systems, and audit readiness is where strengths really shine, apply now and take the opportunity to make an immediate, positive impact in this Technical Manager role. Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
