5991 jobs found

HVAC & Process Chiller Service Engineer Location: Field-Based Across the Island of Ireland Salary: £32,000 - £44,000 (Dependent on Experience) Benefits: Company Van, Fuel Card, Tools & Equipment Provided About the Role We are currently recruiting for an experienced HVAC & Process Chiller Service Engineer to join a growing engineering team operating across the island of Ireland. This is an excellent opportunity for an engineer with experience in HVAC, refrigeration, air conditioning, cooling systems, process chillers, or industrial plant maintenance. The successful candidate will be responsible for the installation, servicing, maintenance, fault-finding and repair of a wide range of HVAC and process cooling equipment at customer sites. The role offers excellent variety, autonomy and the opportunity to work on a range of commercial and industrial systems while benefiting from ongoing training and career development. Key Responsibilities Service, maintain and repair HVAC systems and process chillers. Diagnose and rectify mechanical and electrical faults. Carry out planned preventative maintenance (PPM) activities. Install, commission and test new equipment. Respond to breakdown callouts and provide effective solutions. Complete service reports and maintenance documentation accurately. Always ensure compliance with health and safety procedures. Provide professional technical support and customer service on-site. Maintain company tools, vehicle and equipment to a high standard. Candidate Requirements Previous experience as an HVAC Engineer, Refrigeration Engineer, Chiller Engineer, Service Engineer or Maintenance Engineer. Strong fault-finding and diagnostic skills. Experience working on commercial or industrial cooling systems. Good mechanical and electrical knowledge. Ability to work independently and manage a field-based workload. Strong communication and customer service skills. Full UK or Irish driving licence. F-Gas certification would be advantageous but is not essential. Experience with process chillers, refrigeration systems, air conditioning units, heat pumps or industrial cooling equipment would be highly desirable. Location Requirement Due to operational requirements, candidates should ideally be based within approximately 1.5 hours of Antrim , enabling efficient travel throughout the island of Ireland. If you are an experienced engineer looking for a new challenge with a well-established and growing company, we would be keen to hear from you. Please submit an up-to-date CV today via the "Apply" link

Multi-Skilled Maintenance Engineer (known internally as Craft Engineer) Billingham (Home of McCoy's, Pom-Bear and more) On-site Flexi-shift (24/7 cover) Join our snack-loving team We're looking for a Multi Skilled Maintenance Engineer to join us at KP Snacks. If you're ready to bring your ideas to the table, grow your skills and be part of a team that values what makes you, you - this could be your next big move. About the role As a Multi Skilled Engineer, you'll play a key role in keeping our production lines running smoothly and safely. Working as part of the Line Structure Team (LST), you'll support the day-to-day running of our equipment and contribute to continuous improvement across the site. You'll be hands-on with both mechanical and electrical tasks, helping us deliver great-tasting snacks to our customers - right first time, every time. You'll also support and coach colleagues, helping to build engineering capability across the team. This is a varied and rewarding role where no two days are the same, and where your ideas and energy will make a real difference. What's in it for you? We believe in rewarding our colleagues and helping them thrive. Here's a flavour of what we offer: Annual salary of £52,578.66 Annual bonus scheme, with a strong track record of overachievement Comprehensive healthcare support - including Medicash Health Cash Plan, Digital GP, Best Doctors second opinion service and specialist cancer care KP Pension Plan - contribution matching up to 7% of your salary Holiday buy scheme KP4ME - our online platform for benefits, discounts, wellbeing tools and more What will you be doing? Take ownership of mechanical and electrical integrity across your area Carry out planned maintenance, fault finding and repairs Recommend improvements to maintenance schedules and equipment performance Operate food manufacturing equipment when needed, including changeovers Support and coach colleagues and apprentices to build engineering capability Lead and contribute to continuous improvement activities using IWS tools Monitor plant conditions and report defects, ensuring downtime is minimised Maintain high standards of hygiene, safety and housekeeping Champion engineering standards and safe working practices Help create and maintain risk assessments and job operating procedures Who are we? We're KP Snacks, part of the Intersnack family. Across more than 30 countries, over 15,000 of us work together to make the snacks people love - from Hula Hoops to McCoy's. In the UK, we're a team of around 2,400 colleagues, based across seven sites and our Slough HQ. We're proud of our close-knit culture, where we speak up, celebrate differences and push boundaries together. We're committed to inclusion We're building a workplace where everyone belongs. If you don't tick every box, we'd still love to hear from you - your unique perspective could be just what we need. And if there's anything we can do to make the process easier for you, just let us know. We'd love to hear from you if you can bring: A formal engineering qualification (e.g. City & Guilds, NVQ Level 3 or equivalent in Multi skilled engineering) Electrical and mechanical experience and qualifications, including fault finding and diagnostics (Essential) Knowledge of hydraulics, pneumatics, PLCs and safe working practices (Essential) Ability to read and interpret engineering drawings Strong communication and interpersonal skills A flexible, hands-on approach and willingness to support across shifts Experience operating complex machinery in a manufacturing environment Confidence using data to drive decisions and improvements

About the role: We have an excellent opportunity for a Mechanical Technician to join our Maintenance team at our Crossness Sewage Treatment Works. As the successful candidate, your role will be to ensure that all equipment at our waste treatment works is safe to use and running efficiently, using proactive and reactive maintenance methods to assist in keeping such a site running. There has never been a better time to join our organisation as we build towards a greener future, tackling climate change, minimising our environmental impact and reducing our carbon footprint. What you'll be doing as the Mechanical Technician Investigate plant failures and perform repairs as quickly and efficiently as possible to avoid interruptions to the process. This may involve investigating and diagnosing complex faults and performing repairs during incidents. You will be expected to provide technical advice, refer to up-to-date technical knowledge, and provide training or support for technical trainees if required. Examples of equipment that you will be working on include motors, gearboxes, screw /chain conveyors & centrifuges, various pumps, and associated control gear, automatic valves, flow, level and pressure measurement, programmable, chemical handling, and dosing equipment. Completing statutory checks as required. Always working safely and complying with all Health and Safety guidance and procedures. Base Location - Crossness - SE2 9AQ Working Pattern: 38 hours per week, Monday-Friday.7:30 am -3:36 pm Plus standby & overtime opportunity, increasing earnings by a potential £8,000 - £10,000 upon completion of essential company training. Equipment: All PPE, tools, plus the provision of a Van when on duty and on call. What you should bring to the role To thrive in this role, the essential criteria you'll need are: ONC/HNC in engineering, NVQ, or C&G level 3 in Mechanical Engineering qualification in Mechanical Engineering or relevant experience within Mechanical fitting / Industry. Knowledge and awareness of health and safety issues are crucial. The work will require physical fitness, as you will work in confined spaces with the successful completion of the appropriate training. A valid driving licence is essential, and all necessary equipment, such as the vehicle and tools, is provided. What's in it for you? Competitive salary up to £39,000 per annum, depending on skills and experience. Standby rota payments & Overtime opportunities can increase this earning potential by up to a further £8,000-£10,000 per annum upon completion of essential company training. Performance-related pay plan directly linked to company performance measures and targets. 24 days holiday per year, increasing to 28 days with the length of service. (Plus bank holidays) Contributory pension - Defined Contribution - Maximum of 12% -2x employee contribution. Personal Medical Assessments - Open to all once a year. Wider benefits scheme, including our benefits hub, which is packed full of offers and information to save you money and support your well-being. Find out more about our benefits and perks (Please note different T&Cs apply if on secondment) Who are we? We're the UK's largest water and wastewater company, with more than 16 million customers relying on us every day to supply water for their taps and toilets. We want to build a better future for all, helping our customers, communities, people, and the planet to thrive. It's a big job, and we've got a long way to go, so we need help from passionate and skilled people, committed to making a difference and getting us to where we want to be in the years and decades to come. Learn more about our purpose and values Working at Thames Wate r Thames Water is a unique, rewarding, and diverse place to work, where every day you can make a difference, yet no day is the same. As part of our family, you'll enjoy meaningful career opportunities, flexible working arrangements and excellent benefits. If you're looking for a sustainable and successful career where you can make a daily difference to millions of people's lives while helping to protect the world of water for future generations, we'll be here to support you every step of the way. Together, we can build a better future for our customers, our region, and our planet. Real purpose, real support, real opportunities. Come and join the Thames Water family. Why choose us? Learn more. We're committed to being a great, diverse, and inclusive place to work. We welcome applications from everyone and want to ensure you feel supported throughout the recruitment process. If you need any adjustments, whether that's extra time, accessible formats, or anything else, just let us know. We're here to help and support. When a crisis happens, we all rally around to support our customers. As part of Team Thames, you'll have the opportunity to sign up to support our customers on the frontline as an ambassador. Full training will be given for what is undoubtedly an incredibly rewarding experience. It's also a great opportunity to learn more about our business and meet colleagues. Disclaimer: Due to the high volume of applications we receive, we may close the advert earlier than the advertised date, so we encourage you to apply as soon as possible to avoid disappointment.

Operations Engineer London, UK About Edina Established in 1985, Edina is a leading international power generation specialist, delivering low-carbon, cost-effective energy and battery storage solutions. Using diverse fuel sources like biogas, natural gas and landfill gas, Edina supports clients in improving energy efficiency, reducing emissions, and achieving net zero goals.With over 200 professionals and global operations, Edina combines innovative technology, in-house manufacturing, and strong customer values, including sustainability, flexibility, and integrity, to provide reliable, tailored power solutions and exceptional after-sales support across public and industrial sectors.At the core of our operations is a commitment to excellence and responsibility, where safety is our top priority, and our company values guide every decision we make:People - Our staff are our core asset. Individually and collectively, they are critical to the success of our vision.Organisation - We are engaged, loyal, and accountable in achieving our goals.Work - Working safely is not just a policy, it's our responsibility.Ethics - We embrace honesty, integrity, and respect, doing the right thing every time.Reputation - We strive for excellence in our processes, enabling us to achieve best-in-class industry standards.We are currently looking for a Commercial Operations Manager to join our team on a full-time, permanent basis. The Benefits - Competitive salary- Attractive overtime rates- 25 days' annual leave plus bank holidays and public holidays- Enhanced Holiday Entitlement based on length of service- Company pension scheme with an attractive employer contribution percentage- Company van- Private healthcare scheme- Life Insurance- Employee Assistance Programme- Cycle to Work Scheme- Career development opportunities- Continued investment in employee training to further enhance knowledge, expertise and creativityThis is an exciting opportunity for a skilled mechanical or electrical engineer with strong knowledge of gas/diesel engines to join our leading international organisation.You will play a vital role in maintaining and optimising installations that help clients improve energy efficiency, reduce emissions and move towards Net Zero goals.What is more, you will benefit from attractive overtime rates and a strong all-round rewards package, alongside the chance to build a rewarding long-term future with a company that combines innovation with real-world impact.So, if you are looking for a position where your experience will make a visible difference every day, read on and apply today. The Role As an Operations Engineer, you will carry out scheduled and unscheduled maintenance work on installations across London and the surrounding area.Ensuring that customer satisfaction is achieved, you will efficiently diagnose and implement all reactive maintenance work on our client's installations, as well as other users' installations.You will also oversee and work to optimise the operational processes of users' systems to increase productivity and reduce their use of excess time and materials. About You To be considered as an Operations Engineer, you will need:- A minimum of an ONC, NVQ Level 2 or City & Guilds Level 2 qualification in mechanical and/or electrical engineering, motor vehicle studies or equivalent- To be a competent time-served technician, preferably with a minimum of three years' industrial mechanical and/or electrical experience- In-depth knowledge of gas/diesel engines- Excellent communication skills- Effective IT skills and competency in the use of Microsoft Office packages- A full, valid driving licenceHours of Work: Monday - Friday, 8.00am - 4.30pm.This role will involve weekend work and possible out-of-hours work. You will be required to participate in an established 24-hour callout programme based on a rota system.Other companies may call this role Installation Engineer, Field Service Engineer, Engine Maintenance Technician, Electrical Engineer, Mechanical Engineer, Senior Field Service Technician, or Maintenance Technician.The closing date for applications is 4:00pm on Wednesday, 5th August 2026.Due to a fast-moving market, applications may be filled on short notice, and the deadline date may be brought to a close early. Please apply early to avoid disappointment.We are an employer committed to equal opportunities, and our company is sponsored. (This position may not meet the requirements for sponsorship.)So, if you are ready to join us as an Operations Engineer, please apply via the button shown. This vacancy is being advertised by Webrecruit. The services advertised by Webrecruit are those of an Employment Agency.

CP20612 Plant Fitter 40,000 - 50,000 Essex Alecto Recruitment is working with a well-established specialist operating within the demolition, construction and heavy plant sector. With a modern fleet of equipment and an excellent reputation for delivering high-quality projects, they continue to invest in both their machinery and engineering team. This represents an exciting opportunity to join a stable, growing business that offers long-term career prospects, ongoing investment in training, and the chance to work on a varied fleet of heavy plant equipment. A great stand-out in this role is the variety. You'll split your time between a well-equipped workshop in Braintree and attending breakdowns across London and Essex, ensuring no two days are the same. Salary & Benefits 40,000 - 50,000 DOE Overtime available Company vehicle for site breakdowns Company pension Ongoing training and development Stable Monday-Friday role Long-term career progression Supportive engineering team 28 days holiday including Bank Holidays The Role Service, maintain and repair a fleet of heavy plant and construction equipment. Diagnose and rectify hydraulic, mechanical and electrical faults. Carry out planned preventative maintenance and routine servicing. Attend breakdowns at sites across London and Essex. Complete workshop-based repairs, inspections and component replacements. Ensure all work is completed safely and to a high standard. Requirements Previous experience as a Plant Fitter, Heavy Plant Engineer, Mobile Plant Engineer or similar. Strong hydraulic, mechanical and electrical fault-finding skills. Experience working on construction, demolition or heavy plant machinery. Welding and fabrication experience would be advantageous. Full UK Driving Licence. Relevant engineering qualifications (NVQ, City & Guilds or equivalent) are desirable. If you're an experienced Plant Engineer looking to join a well-established business where you'll enjoy a varied role, excellent job security and the opportunity to work on a modern fleet of equipment, we want to hear from you. Send your CV to: (url removed) or call Chloe on (phone number removed) for a confidential chat. INDHP Plant Fitter, Heavy Plant Engineer, Mobile Plant Engineer, Construction Plant Engineer, Field Service Engineer, Workshop Engineer, Service Engineer, Excavators, Crushers, Screeners, Loading Shovels, Dozers, Telehandlers, Hydraulic Engineer, Mechanical Engineer, Diesel Engineer, Construction Equipment, Demolition Equipment, Preventative Maintenance, Fault Finding, Hydraulics, Mechanical Repairs, Electrical Diagnostics, Plant Machinery, Heavy Equipment, Workshop Fitter, Mobile Engineer.

PSV / HGV Mechanic - Late Shifts - Redditch Are you an experienced PSV or HGV Mechanic looking for your next challenge? Join a professional engineering team where your expertise keeps vehicles safe, reliable and ready for the road. 21.50p/h - late shifts - 2pm - 10:30pm - 40 hours per week, overtime paid at 21.50p/h - Rotational weekends - will include bank holidays This is a fantastic opportunity to work in a modern workshop on a varied fleet, with shift work offering plenty of variety, responsibility and long-term career prospects. What's in it for you? Full-time, permanent opportunity Modern workshop and equipment Supportive engineering team Varied work on a fleet of PSVs and HGVs Ongoing training and career development Opportunity to work with the latest vehicle technology The Role As a PSV / HGV Mechanic you'll be responsible for ensuring vehicles are maintained to the highest standards, helping to maximise reliability and minimise downtime. Your responsibilities will include: Carrying out routine servicing, inspections and preventative maintenance. Preparing vehicles for MOT inspections. Diagnosing and repairing mechanical, electrical and hydraulic faults. Ensuring all work is completed in line with DVSA and VOSA standards. Completing job cards and maintenance records accurately. Responding to vehicle breakdowns and carrying out effective repairs. Supporting apprentices and junior engineers where required. Working safely while maintaining high engineering standards at all times. What We're Looking For NVQ Level 3 (or equivalent) in Heavy Vehicle Maintenance & Repair. Previous experience working on PCVs or HGVs within a workshop, fleet or dealership environment. Strong diagnostic and fault-finding skills. Good knowledge of mechanical, electrical and hydraulic systems. Ability to work independently and as part of a team. Flexibility to work shifts and occasional overtime. Full UK driving licence. Desirable: PCV licence (preferred but not essential). To apply, please send a copy of your CV and a covering letter to alex com or, alternatively, submit your application via the link below Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.

Shift Maintenance Engineer Salary: £53,000 to £55,000 + Pension + Overtime Panama Shift Pattern - Days & Nights Location: Coalville Reference: Jo7329/CH The Company My client is one of the UK's leading manufacturers within its field of food based packaging products and associated processes. The group is a well established producer to the European markets and have been established over 30 years. The site in Preston is looking once again to expand due to further investment, within this secure organisation. Key Skills Apprentice Trained Engineer Experience of PLC's & Automated Machinery Understanding of PPM Systems The Role Corrugators Material handling conveyor systems (palletisers, strappers, and wrappers) Box converting lines which have print units, cutting units, stacking, and folding PLC Faulting finding You will have served a minimum of ideally a full apprenticeship in electrical or mechanical engineering and have experience working within planned and preventative maintenance schedules, working on conveyors, inverters, drives, sensors, plastics or insulation machines, packaging machines, motors, print units, cutting units, stacking, and folding machines. On a day to day basis, you will be responsible for all production equipment including compliance with Health & Safety policies are met and any maintenance activities are completed to the highest standards. There is a huge scope and variety on offer, so the successful candidate will be in line to broaden their skills considerably. If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally, and the company is looking to recruit this role as soon as possible. ETS Consulting Ltd - Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets. ETS Consulting Limited act as an employment business and employment agency and are registered in England and Wales as ETS Consulting Limited, registered no . Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provide ETS Consulting with proof of your identity along with proof of your eligibility to work in the United Kingdom.

Company description: Location: Manchester, England, United Kingdom Job ID: 88815 We Elevate Quality of urban life Our elevators, escalators, and moving walks safely transport more than two billion of us up and down buildings and across transportation hubs every day. As part of the Schindler team, you'll discover meaningful work that enhances quality of life for communities, and contribute to making places more accessible, inclusive, and sustainable for all. We combine innovation, safety, and high ethical standards, ensuring respect both among colleagues and for the world around us. By joining us, you don't just become part of our success story; you help shape the future and continue our rich legacy that started back in 1874. Join us as a Lift Service Engineer We are looking to recruit for a Lift Service Engineer to work as part of the local team covering Salford and Lancashire, supporting our customer communications, compliment and supporting the management team. The successful candidate will carry out planned preventative maintenance regimes as determined by the contract terms to on portfolio lift equipment. Job description: Carry out routine servicing of lift equipment, including minor repair work and the routine replacement of components and in accordance with approved company procedures (PPE, PDA, 2+ etc) To rectify and reduce faults on lift equipment in cases of breakdown and check to confirm correct functioning Checks to include, speed, motor start/stop, noise temperature and power supply using approved company issued tooling and protective equipment Carry out the routine inspection, adjustment, of escalator installations in accordance with approved procedures. Reinstate lift and complete service documentation Carrying out fault finding and diagnostic procedures using a range of techniques, technical manuals and appropriate test equipment, restoring equipment to service Competence is required to make effective use of written or graphical information Profile description: Experience in lift Servicing/ Maintenance/ Repairs preferred Qualified to NVQ level 3 minimum in lift maintenance or equivalent Advanced Electrical and Mechanical knowledge, including Multi-Brand equipment Advanced problem-solving skills Full UK driving License The ability to work under pressure, to deadlines and within efficiencies The ability to work independently with a flexible approach Good communication skills at different levels (Client/Service Leader/Inspectors) Manual dexterity - Requires the use of hands, arms and feet for repetitive lifting; use of hands and arms to operate various hand and power tools and to record written information Proven fault finding and diagnostic skills We offer: Competitive salary Company Van, with a fuel card 25 days' holiday plus bank holidays, and an annual paid volunteering day Pension scheme with 6% company contribution Comprehensive life assurance Enhanced family leave Private medical cover with a trusted provider, plus 24/7 virtual GP access Employee Assistance Programme offering confidential support Free eye tests and eyewear discounts Access to a range of employee benefits, including Tech and Cycle to Work schemes, plus exclusive retailer discounts

Job Title : EV Electrician Location: Manchester Salary : £35k - £50k per annum (inclusive of oncall and overtime) Job Type: Full Time, Permanent HF Group is one of the UK's leading multi-discipline building services contractors, delivering high-quality solutions across Electrical, Mechanical, Fire & Security, Telecommunications, and Automated Controls. With a legacy spanning over 3 centuries and a family culture, we consider all of our employees as part of the family and invaluable assets to our ongoing business. Our head office is in Glasgow with offices in Edinburgh, Manchester, Belfast and Aberdeen, providing services to clients across both the public and private sectors throughout the UK. About The Role: As part of our continued growth, we're searching for a skilled and motivated EV Electrician with experience in the installation and testing of Electric Vehicle Charge points, to join our Electrical Division in Manchester (North East based, preferably South of River Tyne). The successful candidate will be responsible for delivering high-quality electrical installations, maintenance, and testing across commercial and industrial sites. This is a fantastic opportunity to work on diverse projects while advancing your career in a supportive and safety-focused environment. Key Responsibilities: Carry out EV Charge-point & electrical installations in accordance with BS7671 and current building regulations Perform inspection, testing, and certification of electrical systems with a focus on EV charging sites Diagnose and repair faults efficiently and safely Supervise apprentices and junior electricians Maintain accurate documentation and compliance records Liaise with clients and site managers to ensure smooth project delivery About you: Requirements: S/JIB Approved Electrician status or equivalent 18th Edition Wiring Regulations certification ECS card (Gold) Proven experience in commercial or industrial electrical work Experience with EV Charging installations desirable C&G (2921-34) or equivalent desirable Strong understanding of health & safety practices Full UK driving license (preferred) What we offer: Competitive salary paid weekly with overtime opportunities Full PPE provided Ongoing training and development Pension scheme and paid holidays Supportive team culture with room to grow Additional Information: Applications close on Friday, 10th July 2026 , if you have not heard from us within 4 weeks of the closing date, please assume your application has been unsuccessful on this occasion. HF Group is an equal opportunity employer, committed to fostering a diverse and inclusive workplace. No Agencies Please. Please click the APPLY button to send your CV and Cover Letter for this role. Candidates with the experience or relevant job titles of; Electrician, Commercial Electrician, Domestic Electrician, Industrial Electrician, Experienced Electrician, Qualified Electrician, EV Electrician, EV Charging Electrician, Approved Electrician, Electrical Engineer, Multi Skilled Electrical Technician, Maintenance Electrician, may be considered for this role.

Our client, a respected and growing specialist within the manufacturing sector, are looking to recruit an Industrial Door Installation & Service Engineer to join their team on a permanent basis. Covering sites across Gloucestershire and Worcestershire, this opportunity has arisen due to continued expansion and a strong pipeline of work. The successful Industrial Door Installation & Service Engineer should have: Hands-on experience installing Rapid Roll doors. Good electrical installation, fault-finding and diagnostic skills. Previous experience servicing, maintaining and repairing industrial door systems. The ability to work independently whilst delivering a high standard of workmanship. A full UK driving licence. In this role, the Industrial Door Installation & Service Engineer will be responsible for: Carrying out the installation, servicing, maintenance and repair of industrial doors and loading bay equipment. Commissioning new door systems and identifying electrical and mechanical faults. Completing planned preventative maintenance (PPM) visits and responding to breakdowns when required. Producing accurate service reports, site surveys and maintenance documentation. Delivering a professional service to customers while identifying opportunities for additional repairs or upgrades. Our client is offering the successful Industrial Door Installation & Service Engineer a salary of £35,500 - £37,500 per annum, depending on experience, based on a 40-hour working week. In addition, you'll receive a company vehicle, company tools, ongoing training and development, holiday entitlement, and enhanced overtime rates, providing excellent earning potential. If you're an experienced Industrial Door Installation & Service Engineer looking to join a genuine, supportive business that values its engineers and offers long-term career progression, we'd love to hear from you. Apply today to find out more about this excellent opportunity. PS2

LOCATION: Gyle Shopping Centre SHIFT PATTERN: Saturday & Sunday every Weekend, 16 hours per week PAY RATE: Competitive ROLE OVERVIEW AND PURPOSE We are looking for a dedicated and reliable Cleaner to join our team at The Gyle Shopping Centre. This weekend role is responsible for maintaining high standards of cleanliness, presentation, and hygiene throughout the centre, ensuring a safe and welcoming environment for customers, retailers, and colleagues. he successful candidate will work Saturday and Sunday and undertake a range of cleaning duties across public areas, food court spaces, and welfare facilities using both manual cleaning methods and mechanical floor cleaning equipment. KEY RESPONSIBILITIES Clean and maintain public areas throughout The Gyle Shopping Centre. Clear, clean, and sanitise tables and seating areas within the food court and customer dining areas. Empty litter bins and remove waste in line with site procedures. Clean and sanitise customer and staff toilet facilities, including wash basins, fixtures, mirrors, and floors. Operate floor cleaning machinery safely and effectively to maintain high presentation standards. Sweep, mop, and maintain entrances, walkways, and communal areas. Respond promptly to spillages and reactive cleaning requirements to ensure a safe environment. Replenish cleaning consumables including soap, toilet tissue, and paper towels. Set up, maintain, and store cleaning equipment and supplies appropriately. Report any maintenance issues, hazards, or health and safety concerns to the Supervisor. Support Team Leaders and Supervisors as required to ensure excellent service delivery. Complete all mandatory training and comply with company policies and procedures. Previous cleaning experience is desirable, preferable within a retail, shopping centre, or commercial environment. Experience operating floor cleaning machinery is advantageous, although full training will be provided. Good communication and interpersonal skills. Ability to work independently and as part of a team. Ability to use initiative and prioritise tasks effectively. Excellent attention to detail and commitment to high standards. Friendly, professional, and customer-focused approach. Good understanding of health and safety requirements. Additional weekday shifts and overtime opportunities are regularly available to support business requirements, holiday cover, and peak trading periods. Flexibility to work additional hours when required is desirable. We're proud to offer a great range of benefits including: 24/7 GP: Both you and your immediate family can speak to a UK-based GP from the comfort of your own home Mental Health support and Life Event Counseling Get Fit Programme Financial and legal support Cycle to work scheme Access Perks at Work, our innovative employee app where you can find: Perks: discounts, gift cards, cashback, and exclusive offers Life: Search for resources and tools on topics ranging from family and life to health, money and work Support: Online chat or telephone service for urgent support in a crisis For more information about ABM's benefits, visit our About ABM: ABM (NYSE: ABM) is one of the world's largest providers of integrated facility, engineering, and infrastructure solutions. Every day, over 100,000 team members deliver essential services that make spaces cleaner, safer, and efficient, enhancing the overall occupant experience. ABM serves a wide range of market sectors including commercial real estate, aviation, mission critical, and manufacturing and distribution. With over $8 billion in annual revenue and a blue-chip client base, ABM delivers innovative technologies and sustainable solutions that enhance facilities and empower clients to achieve their goals. Committed to creating smarter, more connected spaces, ABM is investing in the future to meet evolving challenges and build a healthier, thriving world. ABM: Driving possibility, together. For more information, visit. ABM are committed to employment practices that promote diversity and inclusion in employment regardless of age, disability, gender reassignment, sex, marriage and civil partnership status, pregnancy and maternity status, race, religion or belief. We are proud members of the Armed Forces Covenant Employer Recognition Scheme.

Recruit4staff are representing a well-established precision engineering company in their search for a CNC Turner Programmer/Setter to work in Crewe . Job Role: Programming, setting and operating CNC Turning machines using FANUC controls, working from engineering drawings to produce bespoke one-off and small batch components. The role involves machining a variety of materials, including ferrous, non-ferrous, stainless steel, plastics, and composites, to tight tolerances. You will be responsible for producing first-off samples for inspection and ensuring accuracy throughout the machining process. Job Details: Pay: Up to £18 per hour (£38,000 per annum) Hours of Work: Monday to Friday 08:00 - 16:30 (40 hours per week) Duration: Permanent Benefits: Pay review after 3 months Overtime available at enhanced rates (x1.5) 26 days holiday plus bank holidays (increasing to 31 with service) Company pension scheme Free onsite parking Essential Skills & Experience: Programming CNC Turning machines Setting and operating CNC Turning machines Reading and interpreting engineering drawings Desired Skills & Experience: Experience using FANUC controls Experience in a contract machine shop Essential Qualifications: City & Guilds in Mechanical Engineering or equivalent Desired Qualifications: CNC Programming qualifications CAD/CAM qualifications Commutable From: Crewe, Sandbach, Nantwich, Stoke, Whitchurch, Middlewich, Knutsford, Congleton Similar Job Titles: CNC Programmer/Setter, CNC Machinist, CNC Miller, CNC Programmer, Precision Engineer, Mechanical Engineer, CNC Operator For further information about this role, please apply now. This vacancy is being advertised on behalf of Recruit4staff , who are operating as a recruitment agency.

Electrical & Industrial Products Distribution To 60,000 + Bonus + Benefits Leeds Lead Procurement Strategy. Drive Commercial Performance. Influence Business Growth. Our client is a fast-growing and highly respected supplier of electrical and industrial products, serving an impressive customer base of mechanical and electrical end user customers throughout the UK. As part of their continued growth and investment plans, they are seeking an experienced and commercially astute Procurement Manager to join their Senior Leadership Team and take ownership of the procurement function. This is an outstanding opportunity for a proactive procurement professional to lead transformation across purchasing, supplier management, inventory planning and procurement strategy-helping to build a best-in-class function that supports the next phase of their growth. The Opportunity Reporting directly to the Operations Director, you will play a pivotal role in the development and execution of procurement strategies that enhance operational performance, strengthen supplier partnerships and deliver commercial value across the business. You'll be empowered to review and improve current processes, introduce best practices and provide strategic leadership to a dedicated procurement team. Key Responsibilities Develop and implement procurement strategies aligned to the company's growth objectives. Build, manage and strengthen supplier relationships to ensure outstanding service, quality and commercial performance. Drive cost-reduction initiatives and margin improvement through effective negotiation and supplier management. Lead inventory optimisation and demand forecasting activities to maximise stock availability while controlling working capital. Enhance procurement processes, systems and controls to improve efficiency, scalability and operational excellence. Analyse supplier performance and market trends to identify opportunities and mitigate risks. Lead, mentor and develop the procurement team, fostering a culture of continuous improvement. Work collaboratively with sales, operations and senior leadership to support customer requirements and business objectives. About You We are looking to speak with an ambitious procurement professional who combines strategic thinking with a practical, hands-on approach. You will ideally possess: Proven experience as a Procurement Manager, Purchasing Manager, Senior Buyer or Procurement Lead within an electrical, engineering, manufacturing, automation or industrial environment. Strong commercial acumen with excellent negotiation and supplier relationship management skills. Experience of inventory management, forecasting and stock optimisation. A track record of delivering procurement improvements, cost savings and process enhancements. Strong leadership skills with experience managing, coaching and developing teams. Confidence using ERP/MRP systems and procurement reporting tools. The ability to build strong relationships and influence stakeholders at all levels of the business. The Business Our client is a market-leading and rapidly expanding provider of technical products, systems and ancillary solutions to customers across a diverse range of industrial sectors. They have built an enviable reputation for service excellence, technical expertise and long-term customer partnerships. As they continue to grow, they are investing in key leadership appointments that will help drive operational excellence and support their ambitious plans for the future. This is a high-profile role offering genuine influence and the opportunity to make a lasting impact. What's on Offer? Competitive salary to c 60,000 Performance-related bonus Comprehensive benefits package Significant autonomy and ownership within the role Direct involvement with the Senior Leadership Team The opportunity to shape and transform a key business function A dynamic, growing and successful business environment Excellent long-term career prospects Apply Now If you're a commercially driven procurement professional looking for the opportunity to influence strategy, drive change and play a key role in the success of a growing organisation, we'd love to hear from you. Apply today with your full CV, quoting reference 10479 and discover how this exciting Procurement Manager opportunity could be the ideal next step in your career.