Your new role Installation & Setup : Install, configure, and test new hardware, software, or machinery on sites around the UK 8x8 VoIP will be rolled out across all of sites, Uninterruptable Power Supplies will be installed across all sites to ensure that there is continuity of Voice & IP services in the event of a power loss, Removal of old PBX equipment and handsets for WEE disposal, Maintenance & Repair: Perform preventative maintenance and troubleshoot complex technical issues, from mechanical breakdowns to network failures, Collaborate with project teams to resolve technical issues and ensure project goals are met, Support: Provide on-site training and guidance to users, Documentation & Reporting: Create detailed reports on site conditions, assist with planning, project progress and resolved issues, Undertake any duties allocated by the Service Desk Manager to support the organisation including installation of new equipment, configuration changes and replacement of faulty equipment. What you'll need to succeed Knowledge of telephone systems (PBX & VOIP) - 8x8 solution Understanding of networking (DNS, DHCP, Switches, VPN etc) Strong knowledge of managing IP network equipment including the deployment of campus WiFi solutions A deep understanding of specific engineering fields, such as IT, electrical, or mechanical systems Experience working with Azure Data Services or Azure Data Factory Experience managing Active Directory The role is inside IR35 and fully expenses. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
Oct 07, 2026
Full time
Your new role Installation & Setup : Install, configure, and test new hardware, software, or machinery on sites around the UK 8x8 VoIP will be rolled out across all of sites, Uninterruptable Power Supplies will be installed across all sites to ensure that there is continuity of Voice & IP services in the event of a power loss, Removal of old PBX equipment and handsets for WEE disposal, Maintenance & Repair: Perform preventative maintenance and troubleshoot complex technical issues, from mechanical breakdowns to network failures, Collaborate with project teams to resolve technical issues and ensure project goals are met, Support: Provide on-site training and guidance to users, Documentation & Reporting: Create detailed reports on site conditions, assist with planning, project progress and resolved issues, Undertake any duties allocated by the Service Desk Manager to support the organisation including installation of new equipment, configuration changes and replacement of faulty equipment. What you'll need to succeed Knowledge of telephone systems (PBX & VOIP) - 8x8 solution Understanding of networking (DNS, DHCP, Switches, VPN etc) Strong knowledge of managing IP network equipment including the deployment of campus WiFi solutions A deep understanding of specific engineering fields, such as IT, electrical, or mechanical systems Experience working with Azure Data Services or Azure Data Factory Experience managing Active Directory The role is inside IR35 and fully expenses. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
A high-performing building doesn't happen by accident. As Senior Facilities Manager, you'll help turn a technically complex new headquarters into a safe, compliant, resilient and future-ready environment that supports the people using it every day. You'll be involved at a pivotal stage, supporting the journey from technical handover and operational readiness through to occupation and business-as-usual. From Hard FM and smart building technology to contractor management, compliance and business continuity, you'll have the opportunity to influence how the building operates from day one and how it continues to improve. What's in it for you Play an important part in the mobilisation and operational readiness of a major new headquarters. Work with modern building technology, smart systems and data-led facilities management. Gain exposure to complex M&E infrastructure, Hard FM contracts and critical building services. Influence long-term maintenance, compliance, resilience and sustainability from the outset. Work closely with project teams, landlords, consultants, contractors and specialist service partners. Competitive salary and package Your responsibilities as Senior Facilities Manager Support the Hard FM operating model and maintenance strategy across planned, reactive, statutory and lifecycle maintenance. Coordinate technical handover and operational readiness, including commissioning, snagging, defects, O&M information, warranties, asset data and PPM schedules. Help embed smart building technology and digital FM, ensuring systems, dashboards, alerts and operational data translate into effective day-to-day processes. Support business continuity, emergency response and resilience planning, including exercises, critical asset information and recovery arrangements. Manage contractor controls, supplier mobilisation, performance monitoring, permits, RAMS, statutory compliance and audit-ready records. Work across project, technical and supplier teams to identify operational risks, track readiness and support a smooth transition into occupation and BAU operations. What we're looking for in a Senior Facilities Manager Significant facilities management experience within a technically complex or regulated environment, such as laboratories, life sciences, healthcare, research, higher education or comparable critical facilities. Strong technical knowledge of Hard FM and building services, including M&E, HVAC, BMS, electrical systems, water hygiene, fire and life-safety systems, critical plant and statutory maintenance. Experience supporting Hard FM contracts, supplier performance, contractor controls, permit-to-work systems, RAMS, compliance assurance and statutory inspections. Experience of operational readiness and technical handover, including commissioning, Soft Landings, O&M information, asset verification, defects management and phased occupation. A relevant facilities, engineering or building services qualification or equivalent professional experience, alongside practical knowledge of CAFM/IWMS, asset information, PPM and smart building systems. A recognised health and safety qualification is also required. Applications will close on Friday 16th of October with interviews to follow w/c 19th of October. If you're ready to use your technical facilities expertise to shape the operation of a complex, modern working environment from mobilisation onwards, apply today for the Senior Facilities Manager position. Candidate Source Ltd is an advertising agency. Once you have submitted your application it will be passed to the third party Recruiter who is responsible for processing your application. This will include holding and sharing your personal data, our legal basis for this is legitimate interest subject to your declared interest in a job. Our privacy policy can be found on our website and we can be contacted to confirm who your application has been forwarded to.
Oct 07, 2026
Full time
A high-performing building doesn't happen by accident. As Senior Facilities Manager, you'll help turn a technically complex new headquarters into a safe, compliant, resilient and future-ready environment that supports the people using it every day. You'll be involved at a pivotal stage, supporting the journey from technical handover and operational readiness through to occupation and business-as-usual. From Hard FM and smart building technology to contractor management, compliance and business continuity, you'll have the opportunity to influence how the building operates from day one and how it continues to improve. What's in it for you Play an important part in the mobilisation and operational readiness of a major new headquarters. Work with modern building technology, smart systems and data-led facilities management. Gain exposure to complex M&E infrastructure, Hard FM contracts and critical building services. Influence long-term maintenance, compliance, resilience and sustainability from the outset. Work closely with project teams, landlords, consultants, contractors and specialist service partners. Competitive salary and package Your responsibilities as Senior Facilities Manager Support the Hard FM operating model and maintenance strategy across planned, reactive, statutory and lifecycle maintenance. Coordinate technical handover and operational readiness, including commissioning, snagging, defects, O&M information, warranties, asset data and PPM schedules. Help embed smart building technology and digital FM, ensuring systems, dashboards, alerts and operational data translate into effective day-to-day processes. Support business continuity, emergency response and resilience planning, including exercises, critical asset information and recovery arrangements. Manage contractor controls, supplier mobilisation, performance monitoring, permits, RAMS, statutory compliance and audit-ready records. Work across project, technical and supplier teams to identify operational risks, track readiness and support a smooth transition into occupation and BAU operations. What we're looking for in a Senior Facilities Manager Significant facilities management experience within a technically complex or regulated environment, such as laboratories, life sciences, healthcare, research, higher education or comparable critical facilities. Strong technical knowledge of Hard FM and building services, including M&E, HVAC, BMS, electrical systems, water hygiene, fire and life-safety systems, critical plant and statutory maintenance. Experience supporting Hard FM contracts, supplier performance, contractor controls, permit-to-work systems, RAMS, compliance assurance and statutory inspections. Experience of operational readiness and technical handover, including commissioning, Soft Landings, O&M information, asset verification, defects management and phased occupation. A relevant facilities, engineering or building services qualification or equivalent professional experience, alongside practical knowledge of CAFM/IWMS, asset information, PPM and smart building systems. A recognised health and safety qualification is also required. Applications will close on Friday 16th of October with interviews to follow w/c 19th of October. If you're ready to use your technical facilities expertise to shape the operation of a complex, modern working environment from mobilisation onwards, apply today for the Senior Facilities Manager position. Candidate Source Ltd is an advertising agency. Once you have submitted your application it will be passed to the third party Recruiter who is responsible for processing your application. This will include holding and sharing your personal data, our legal basis for this is legitimate interest subject to your declared interest in a job. Our privacy policy can be found on our website and we can be contacted to confirm who your application has been forwarded to.
We are looking for an experienced and reliable Fire Engineer to join our clients' team to carry out fire safety installation works within a residential property currently undergoing renovation in Norwich. This is an excellent opportunity for a skilled engineer who takes pride in delivering high-quality work while ensuring compliance with current fire safety regulations and industry standards. Key Responsibilities Install, configure and commission fire alarm systems. Install and test emergency lighting systems. Carry out first-fix and second-fix electrical works associated with fire safety installations. Ensure all installations comply with relevant British Standards and fire safety regulations. Complete testing, fault finding and commissioning of installed systems. Maintain a clean, safe and organised working environment at all times. Liaise professionally with site managers, contractors and other trades to ensure work is completed efficiently. Complete installation records and commissioning documentation where required. Essential Requirements Previous experience installing fire alarm and emergency lighting systems. Good understanding of relevant British Standards, including BS 5839 and BS 5266. ECS/CSCS card (where applicable). Ability to work independently and as part of a team. Strong attention to detail and commitment to high standards of workmanship. Excellent communication and problem-solving skills. Desirable Qualifications FIA training or equivalent fire industry qualifications. Experience working on residential renovation or refurbishment projects. Electrical qualifications (e.g. Level 3 NVQ, City & Guilds, or equivalent). Experience commissioning addressable fire alarm systems. What We Offer Competitive weekly rates of pay Opportunity to work on a high-quality residential renovation project. Supportive working environment. Excellent on-site facilities If you are a motivated Fire Engineer with experience in fire alarm and emergency lighting installations, we'd like to hear from you. Contract Personnel are one of East Anglia's longest-standing, leading independent recruitment agencies - established in 1989. Offering Temporary and Permanent recruitment solutions, we keep you updated with the latest opportunities and support you throughout your job search. Contact Rosie or Hannah at Contract Personnel for more details today!
Oct 07, 2026
Full time
We are looking for an experienced and reliable Fire Engineer to join our clients' team to carry out fire safety installation works within a residential property currently undergoing renovation in Norwich. This is an excellent opportunity for a skilled engineer who takes pride in delivering high-quality work while ensuring compliance with current fire safety regulations and industry standards. Key Responsibilities Install, configure and commission fire alarm systems. Install and test emergency lighting systems. Carry out first-fix and second-fix electrical works associated with fire safety installations. Ensure all installations comply with relevant British Standards and fire safety regulations. Complete testing, fault finding and commissioning of installed systems. Maintain a clean, safe and organised working environment at all times. Liaise professionally with site managers, contractors and other trades to ensure work is completed efficiently. Complete installation records and commissioning documentation where required. Essential Requirements Previous experience installing fire alarm and emergency lighting systems. Good understanding of relevant British Standards, including BS 5839 and BS 5266. ECS/CSCS card (where applicable). Ability to work independently and as part of a team. Strong attention to detail and commitment to high standards of workmanship. Excellent communication and problem-solving skills. Desirable Qualifications FIA training or equivalent fire industry qualifications. Experience working on residential renovation or refurbishment projects. Electrical qualifications (e.g. Level 3 NVQ, City & Guilds, or equivalent). Experience commissioning addressable fire alarm systems. What We Offer Competitive weekly rates of pay Opportunity to work on a high-quality residential renovation project. Supportive working environment. Excellent on-site facilities If you are a motivated Fire Engineer with experience in fire alarm and emergency lighting installations, we'd like to hear from you. Contract Personnel are one of East Anglia's longest-standing, leading independent recruitment agencies - established in 1989. Offering Temporary and Permanent recruitment solutions, we keep you updated with the latest opportunities and support you throughout your job search. Contact Rosie or Hannah at Contract Personnel for more details today!
Senior M&E Quantity Surveyor Location: Northumberland, UK About the Opportunity A leading Irish Main Contractor is seeking an experienced Senior M&E Quantity Surveyor to join the commercial team on a hyperscale data centre project in Northumberland . This confidential development represents one of the largest technology infrastructure schemes currently under construction in the UK and offers an exceptional opportunity to work on a complex, multi-phase project featuring high-value mechanical and electrical installations. The successful candidate will play a key role in the commercial delivery of significant MEP packages across a technically challenging and fast-paced construction environment. The Role Reporting to the Commercial Manager, the MEP Senior Quantity Surveyor will be responsible for the commercial management of large-scale mechanical and electrical packages from procurement through to final account. You will work closely with project teams, subcontractors, and stakeholders to ensure commercial objectives are achieved while maintaining strong cost control and contractual compliance throughout the project lifecycle. Key Responsibilities Management of all commercial aspects of Mechanical & Electrical packages. Preparation of monthly valuations, payment applications, and cost reports. Procurement and commercial management of MEP subcontractors. Assessment, negotiation, and agreement of subcontractor variations and accounts. Preparation and management of project cash flow forecasts. Identification and mitigation of commercial risks and opportunities. Contract administration and management of change control procedures. Agreement of interim valuations and final accounts. Detailed reporting on project financial performance to senior management. Close collaboration with project, design, procurement, and engineering teams. Support the successful delivery of a large-scale mission-critical facility. Mentor and develop junior commercial team members where required. Requirements Degree qualified in Quantity Surveying, Commercial Management, or a related discipline. Minimum 7 years' Quantity Surveying experience within the construction industry. Proven experience managing Mechanical & Electrical packages on major construction projects. Previous experience with a main contractor or specialist MEP contractor. Experience working on data centres, pharmaceutical, life sciences, semiconductor, cleanroom, industrial, or other mission-critical projects is highly desirable. Strong understanding of MEP systems and services procurement. Excellent contractual and commercial awareness. Strong negotiation, communication, and stakeholder management skills. Ability to manage multiple high-value work packages simultaneously. Proficient in commercial reporting and cost management systems. What's on Offer Competitive salary and comprehensive benefits package. Car allowance or company vehicle. Pension contribution. Private healthcare. Life assurance cover. Ongoing professional development and training. Clear career progression within a growing organisation. Opportunity to work on one of the UK's most significant mission-critical construction projects. Long-term pipeline of major projects across the UK and Ireland. Why Apply? This is a unique opportunity to join a highly respected Irish Main Contractor delivering a flagship technology infrastructure project. You'll gain exposure to complex, high-value MEP installations within a cutting-edge construction environment while playing a key role in the commercial success of a landmark development. MEP Senior Quantity Surveyor Data Centre Construction Main Contractor Northumberland Mission Critical Projects Excellent Salary + Benefits To apply, please submit your CV or feel free to reach out for a confidential conversation. Send an email to (url removed), give me a call on (phone number removed) or WhatsApp me on +(phone number removed).
Oct 07, 2026
Full time
Senior M&E Quantity Surveyor Location: Northumberland, UK About the Opportunity A leading Irish Main Contractor is seeking an experienced Senior M&E Quantity Surveyor to join the commercial team on a hyperscale data centre project in Northumberland . This confidential development represents one of the largest technology infrastructure schemes currently under construction in the UK and offers an exceptional opportunity to work on a complex, multi-phase project featuring high-value mechanical and electrical installations. The successful candidate will play a key role in the commercial delivery of significant MEP packages across a technically challenging and fast-paced construction environment. The Role Reporting to the Commercial Manager, the MEP Senior Quantity Surveyor will be responsible for the commercial management of large-scale mechanical and electrical packages from procurement through to final account. You will work closely with project teams, subcontractors, and stakeholders to ensure commercial objectives are achieved while maintaining strong cost control and contractual compliance throughout the project lifecycle. Key Responsibilities Management of all commercial aspects of Mechanical & Electrical packages. Preparation of monthly valuations, payment applications, and cost reports. Procurement and commercial management of MEP subcontractors. Assessment, negotiation, and agreement of subcontractor variations and accounts. Preparation and management of project cash flow forecasts. Identification and mitigation of commercial risks and opportunities. Contract administration and management of change control procedures. Agreement of interim valuations and final accounts. Detailed reporting on project financial performance to senior management. Close collaboration with project, design, procurement, and engineering teams. Support the successful delivery of a large-scale mission-critical facility. Mentor and develop junior commercial team members where required. Requirements Degree qualified in Quantity Surveying, Commercial Management, or a related discipline. Minimum 7 years' Quantity Surveying experience within the construction industry. Proven experience managing Mechanical & Electrical packages on major construction projects. Previous experience with a main contractor or specialist MEP contractor. Experience working on data centres, pharmaceutical, life sciences, semiconductor, cleanroom, industrial, or other mission-critical projects is highly desirable. Strong understanding of MEP systems and services procurement. Excellent contractual and commercial awareness. Strong negotiation, communication, and stakeholder management skills. Ability to manage multiple high-value work packages simultaneously. Proficient in commercial reporting and cost management systems. What's on Offer Competitive salary and comprehensive benefits package. Car allowance or company vehicle. Pension contribution. Private healthcare. Life assurance cover. Ongoing professional development and training. Clear career progression within a growing organisation. Opportunity to work on one of the UK's most significant mission-critical construction projects. Long-term pipeline of major projects across the UK and Ireland. Why Apply? This is a unique opportunity to join a highly respected Irish Main Contractor delivering a flagship technology infrastructure project. You'll gain exposure to complex, high-value MEP installations within a cutting-edge construction environment while playing a key role in the commercial success of a landmark development. MEP Senior Quantity Surveyor Data Centre Construction Main Contractor Northumberland Mission Critical Projects Excellent Salary + Benefits To apply, please submit your CV or feel free to reach out for a confidential conversation. Send an email to (url removed), give me a call on (phone number removed) or WhatsApp me on +(phone number removed).
Senior Commissioning MEP Manager 80,000 - 90,000 + Benefits Full-Time Site Based London & Major UK Projects Are you an experienced Commissioning Manager looking to take ownership of complex, high-profile building projects from commissioning through to handover? A leading independent engineering and commissioning consultancy is looking to appoint a Senior Commissioning MEP Manager to support the delivery of major developments across the commercial, data centre, healthcare, mixed-use and mission-critical sectors. This is an opportunity to join a highly respected team that has played a key role in the successful delivery of some of the UKs most technically challenging projects, including large-scale commercial headquarters, critical infrastructure facilities, flagship healthcare developments and landmark regeneration schemes. The Role You will be responsible for managing the full commissioning process on major projects, acting as the key interface between clients, contractors, consultants and specialist subcontractors to ensure systems are delivered, tested and handed over to the highest standards. Responsibilities will include: Leading commissioning management activities across complex MEP installations Developing and managing commissioning programmes and strategies Chairing commissioning meetings and coordinating project stakeholders Monitoring commissioning progress and identifying project risks Witnessing testing, validation and system demonstrations Managing integrated systems testing and client handover processes Ensuring compliance with project specifications and industry standards Supporting junior commissioning managers and site teams About You Proven experience in Commissioning Management within the built environment Strong understanding of mechanical, electrical and public health building services systems Experience delivering large and complex projects, ideally within commercial, healthcare, data centre, life sciences or infrastructure sectors Excellent stakeholder management and communication skills Ability to lead multidisciplinary teams through commissioning and handover phases Relevant engineering qualification or equivalent industry experience Whats on Offer? Salary circa 80,000 - 90,000 Exposure to major flagship projects across the UK Opportunity to work alongside some of the industrys most experienced commissioning specialists Clear progression into leadership-level positions Strong pipeline of secured projects across multiple sectors
Oct 07, 2026
Full time
Senior Commissioning MEP Manager 80,000 - 90,000 + Benefits Full-Time Site Based London & Major UK Projects Are you an experienced Commissioning Manager looking to take ownership of complex, high-profile building projects from commissioning through to handover? A leading independent engineering and commissioning consultancy is looking to appoint a Senior Commissioning MEP Manager to support the delivery of major developments across the commercial, data centre, healthcare, mixed-use and mission-critical sectors. This is an opportunity to join a highly respected team that has played a key role in the successful delivery of some of the UKs most technically challenging projects, including large-scale commercial headquarters, critical infrastructure facilities, flagship healthcare developments and landmark regeneration schemes. The Role You will be responsible for managing the full commissioning process on major projects, acting as the key interface between clients, contractors, consultants and specialist subcontractors to ensure systems are delivered, tested and handed over to the highest standards. Responsibilities will include: Leading commissioning management activities across complex MEP installations Developing and managing commissioning programmes and strategies Chairing commissioning meetings and coordinating project stakeholders Monitoring commissioning progress and identifying project risks Witnessing testing, validation and system demonstrations Managing integrated systems testing and client handover processes Ensuring compliance with project specifications and industry standards Supporting junior commissioning managers and site teams About You Proven experience in Commissioning Management within the built environment Strong understanding of mechanical, electrical and public health building services systems Experience delivering large and complex projects, ideally within commercial, healthcare, data centre, life sciences or infrastructure sectors Excellent stakeholder management and communication skills Ability to lead multidisciplinary teams through commissioning and handover phases Relevant engineering qualification or equivalent industry experience Whats on Offer? Salary circa 80,000 - 90,000 Exposure to major flagship projects across the UK Opportunity to work alongside some of the industrys most experienced commissioning specialists Clear progression into leadership-level positions Strong pipeline of secured projects across multiple sectors
Electrical Maintenance Engineer Sector: Food Manufacturing Location: Bedfordshire Salary: Depending on experience Hours: Monday to Friday, 05 30 Contract: Permanent, full time Are you an electrically qualified Maintenance Engineer with strong fault-finding experience in a manufacturing or industrial environment? ISQ Recruitment is recruiting an Electrical Maintenance Engineer for an established food manufacturer in Bedfordshire. The role offers a consistent Monday-to-Friday early shift, varied hands-on electrical maintenance work and the opportunity to get involved in equipment improvements, installations and site engineering projects. About the role Reporting to the Engineering Manager, you will provide electrical maintenance support across plant, machinery and production equipment. The role combines planned preventative maintenance with reactive breakdown work. You will diagnose electrical faults, carry out repairs, support machinery set-ups and site start-up, and help keep equipment operating safely and reliably. You will also have the opportunity to support machinery installations, improvement work and wider engineering projects across the site. Key duties Carry out electrical fault finding, maintenance and repair on production machinery and plant Complete planned preventative maintenance in line with the site schedule Respond to breakdowns and electrical issues affecting production Work with single and three-phase motors, inverters and associated electrical systems Read and interpret electrical drawings Support machinery adjustments, set-ups and production start-up Record completed maintenance and identify any follow-up work required Assist with machinery installations and site engineering improvements What we are looking for You will need: Level 3 NVQ, BTEC, electrical apprenticeship or equivalent qualification in Electrical Engineering or a related discipline Previous electrical maintenance experience within a manufacturing, production or industrial environment Strong electrical fault-finding and diagnostic skills Experience working with single and three-phase motors and inverters Ability to read and interpret electrical drawings Practical experience maintaining industrial machinery and equipment Previous food manufacturing experience would be beneficial, but experience from other manufacturing or industrial environments will also be considered. Benefits / package Monday-to-Friday working pattern Life cover Overtime paid at x1.5 after 40 hours and x2 on Sundays Opportunities to gain further qualifications in continuous improvement and management Opportunity to take ownership of engineering projects and support new equipment investment ISQ Recruitment is acting as an Employment Agency in relation to this vacancy. To apply, please send your CV to (url removed) or contact ISQ Recruitment on (phone number removed) for more information.
Oct 07, 2026
Full time
Electrical Maintenance Engineer Sector: Food Manufacturing Location: Bedfordshire Salary: Depending on experience Hours: Monday to Friday, 05 30 Contract: Permanent, full time Are you an electrically qualified Maintenance Engineer with strong fault-finding experience in a manufacturing or industrial environment? ISQ Recruitment is recruiting an Electrical Maintenance Engineer for an established food manufacturer in Bedfordshire. The role offers a consistent Monday-to-Friday early shift, varied hands-on electrical maintenance work and the opportunity to get involved in equipment improvements, installations and site engineering projects. About the role Reporting to the Engineering Manager, you will provide electrical maintenance support across plant, machinery and production equipment. The role combines planned preventative maintenance with reactive breakdown work. You will diagnose electrical faults, carry out repairs, support machinery set-ups and site start-up, and help keep equipment operating safely and reliably. You will also have the opportunity to support machinery installations, improvement work and wider engineering projects across the site. Key duties Carry out electrical fault finding, maintenance and repair on production machinery and plant Complete planned preventative maintenance in line with the site schedule Respond to breakdowns and electrical issues affecting production Work with single and three-phase motors, inverters and associated electrical systems Read and interpret electrical drawings Support machinery adjustments, set-ups and production start-up Record completed maintenance and identify any follow-up work required Assist with machinery installations and site engineering improvements What we are looking for You will need: Level 3 NVQ, BTEC, electrical apprenticeship or equivalent qualification in Electrical Engineering or a related discipline Previous electrical maintenance experience within a manufacturing, production or industrial environment Strong electrical fault-finding and diagnostic skills Experience working with single and three-phase motors and inverters Ability to read and interpret electrical drawings Practical experience maintaining industrial machinery and equipment Previous food manufacturing experience would be beneficial, but experience from other manufacturing or industrial environments will also be considered. Benefits / package Monday-to-Friday working pattern Life cover Overtime paid at x1.5 after 40 hours and x2 on Sundays Opportunities to gain further qualifications in continuous improvement and management Opportunity to take ownership of engineering projects and support new equipment investment ISQ Recruitment is acting as an Employment Agency in relation to this vacancy. To apply, please send your CV to (url removed) or contact ISQ Recruitment on (phone number removed) for more information.
Ernest Gordon Recruitment Limited
Oxford, Oxfordshire
Buyer/ Project Coordination (Construction) £50,000 - £60,000 + Office-based + Training + Progression + Company Benefits Oxford Are you a Project Manager, Procurement Coordinator, Buyer or similar from an electrical background looking for a varied but stable officed based coordination role handling procurement and project management across all projects? Do you want to work in a friendly office environment in a highly varied role with the opportunity to process into a qualified supervisor? On offer is a fantastic opportunity that have been electrical contractors for projects in the construction industry for almost 75 years. This company specialise in the education and commercial sectors working on a range of heritage and small works projects across Oxfordshire. In this role, you'll be responsible project coordination including all buying and procurement of order materials, handling material requests and ensure purchases are delivered to site and manage the supply chain. You will also be the primary point of contact for small works clients to discuss requirements, this leads to planning and coordinating projects. This is a Monday-Friday stable office based role 8am-5pm. This role would suit a Project Manager, Procurement Coordinator, Buyer or similar from a construction background looking for a varied but stable officed based coordination role. The Role: Manage procurement of materials for site Ensure the supply chain is up to date Receive calls from small works clients Help with coordination of all construction projects Monday - Friday office based 8am-5pm The Person: Buyer or Project Manager from the Electrical industry Looking for a varied position Commutable to Oxford 5 days a week Reference Number : BBBH27474A If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Oct 07, 2026
Full time
Buyer/ Project Coordination (Construction) £50,000 - £60,000 + Office-based + Training + Progression + Company Benefits Oxford Are you a Project Manager, Procurement Coordinator, Buyer or similar from an electrical background looking for a varied but stable officed based coordination role handling procurement and project management across all projects? Do you want to work in a friendly office environment in a highly varied role with the opportunity to process into a qualified supervisor? On offer is a fantastic opportunity that have been electrical contractors for projects in the construction industry for almost 75 years. This company specialise in the education and commercial sectors working on a range of heritage and small works projects across Oxfordshire. In this role, you'll be responsible project coordination including all buying and procurement of order materials, handling material requests and ensure purchases are delivered to site and manage the supply chain. You will also be the primary point of contact for small works clients to discuss requirements, this leads to planning and coordinating projects. This is a Monday-Friday stable office based role 8am-5pm. This role would suit a Project Manager, Procurement Coordinator, Buyer or similar from a construction background looking for a varied but stable officed based coordination role. The Role: Manage procurement of materials for site Ensure the supply chain is up to date Receive calls from small works clients Help with coordination of all construction projects Monday - Friday office based 8am-5pm The Person: Buyer or Project Manager from the Electrical industry Looking for a varied position Commutable to Oxford 5 days a week Reference Number : BBBH27474A If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Canadian Solar SSES (UK) Ltd. is seeking a Commissioning Manager to lead a team of commissioning engineers and technicians for utility-scale battery storage projects. You will plan, coordinate, and execute commissioning activities across sites, traveling up to 50% and working in a hybrid London-based setup with on-site support. The role requires a Masters in electrical engineering, at least 5 years of direct technical experience in related fields, and 2 years of team management experience.
Oct 07, 2026
Full time
Canadian Solar SSES (UK) Ltd. is seeking a Commissioning Manager to lead a team of commissioning engineers and technicians for utility-scale battery storage projects. You will plan, coordinate, and execute commissioning activities across sites, traveling up to 50% and working in a hybrid London-based setup with on-site support. The role requires a Masters in electrical engineering, at least 5 years of direct technical experience in related fields, and 2 years of team management experience.
Ernest Gordon Recruitment Limited
Oxford, Oxfordshire
Buyer/ Project Coordination (Construction) £40,000 - £50,000 + Office-based + Training + Progression + Company Benefits Oxford Are you a Project Manager, Procurement Coordinator, Buyer or similar from a construction background looking for a varied but stable officed based coordination role handling procurement and project management across all projects? Do you want to work in a friendly office environment in a highly varied role with the opportunity to process into a qualified supervisor? On offer is a fantastic opportunity that have been electrical contractors for projects in the construction industry for almost 75 years. This company specialise in the education and commercial sectors working on a range of heritage and small works projects across Oxfordshire. In this role, you'll be responsible project coordination including all buying and procurement of order materials, handling material requests and ensure purchases are delivered to site and manage the supply chain. You will also be the primary point of contact for small works clients to discuss requirements, this leads to planning and coordinating projects. This is a Monday-Friday stable office based role 8am-5pm. This role would suit a Project Manager, Procurement Coordinator, Buyer or similar from a construction background looking for a varied but stable officed based coordination role. The Role: Manage procurement of materials for site Ensure the supply chain is up to date Receive calls from small works clients Help with coordination of all construction projects Monday - Friday office based 8am-5pm The Person: Buyer or Project Manager from the Construction industry Looking for a varied position Commutable to Oxford 5 days a week Reference Number : BBBH27474 If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Oct 07, 2026
Full time
Buyer/ Project Coordination (Construction) £40,000 - £50,000 + Office-based + Training + Progression + Company Benefits Oxford Are you a Project Manager, Procurement Coordinator, Buyer or similar from a construction background looking for a varied but stable officed based coordination role handling procurement and project management across all projects? Do you want to work in a friendly office environment in a highly varied role with the opportunity to process into a qualified supervisor? On offer is a fantastic opportunity that have been electrical contractors for projects in the construction industry for almost 75 years. This company specialise in the education and commercial sectors working on a range of heritage and small works projects across Oxfordshire. In this role, you'll be responsible project coordination including all buying and procurement of order materials, handling material requests and ensure purchases are delivered to site and manage the supply chain. You will also be the primary point of contact for small works clients to discuss requirements, this leads to planning and coordinating projects. This is a Monday-Friday stable office based role 8am-5pm. This role would suit a Project Manager, Procurement Coordinator, Buyer or similar from a construction background looking for a varied but stable officed based coordination role. The Role: Manage procurement of materials for site Ensure the supply chain is up to date Receive calls from small works clients Help with coordination of all construction projects Monday - Friday office based 8am-5pm The Person: Buyer or Project Manager from the Construction industry Looking for a varied position Commutable to Oxford 5 days a week Reference Number : BBBH27474 If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Futures Recruitment are looking to speak with experienced Electrical Switchgear Engineers for an opportunity to join a growing engineering team delivering LV/MV switchgear and electrical distribution solutions. The role will suit an engineer with solid electrical knowledge and hands-on experience of switchgear, control panels or distribution equipment. You'll be involved across the full project lifecycle, supporting projects from initial customer requirements and engineering through to manufacture, testing, installation and commissioning. Working closely with engineering, production and project teams, your responsibilities will include: Developing and reviewing LV/MV switchgear designs and electrical distribution solutions Interpreting customer specifications, technical requirements and electrical drawings Preparing and checking schematics, wiring diagrams and associated engineering documentation Specifying switchgear components, protection devices and other electrical equipment Providing engineering support throughout manufacture and panel assembly Supporting factory acceptance testing (FAT), electrical testing and commissioning activities Investigating and resolving electrical faults and technical issues Liaising with project managers, suppliers, customers and engineers on site Making sure equipment and installations meet relevant electrical standards and safety requirements We're particularly interested in speaking with engineers who have previous experience within switchgear, control panels or electrical distribution environments and a good understanding of LV and/or MV systems. You'll need to be confident reading electrical drawings and schematics, with knowledge of protection, control and distribution equipment. A relevant electrical or electronic engineering qualification would be beneficial, although engineers with strong equivalent industry experience will also be considered. You should also be comfortable fault-finding and working through technical problems, with the communication skills to work effectively with engineering, manufacturing, project and customer teams. If you have a background in LV/MV switchgear and are considering your next move, I'd be keen to have a confidential conversation and tell you more about the opportunity.
Oct 07, 2026
Full time
Futures Recruitment are looking to speak with experienced Electrical Switchgear Engineers for an opportunity to join a growing engineering team delivering LV/MV switchgear and electrical distribution solutions. The role will suit an engineer with solid electrical knowledge and hands-on experience of switchgear, control panels or distribution equipment. You'll be involved across the full project lifecycle, supporting projects from initial customer requirements and engineering through to manufacture, testing, installation and commissioning. Working closely with engineering, production and project teams, your responsibilities will include: Developing and reviewing LV/MV switchgear designs and electrical distribution solutions Interpreting customer specifications, technical requirements and electrical drawings Preparing and checking schematics, wiring diagrams and associated engineering documentation Specifying switchgear components, protection devices and other electrical equipment Providing engineering support throughout manufacture and panel assembly Supporting factory acceptance testing (FAT), electrical testing and commissioning activities Investigating and resolving electrical faults and technical issues Liaising with project managers, suppliers, customers and engineers on site Making sure equipment and installations meet relevant electrical standards and safety requirements We're particularly interested in speaking with engineers who have previous experience within switchgear, control panels or electrical distribution environments and a good understanding of LV and/or MV systems. You'll need to be confident reading electrical drawings and schematics, with knowledge of protection, control and distribution equipment. A relevant electrical or electronic engineering qualification would be beneficial, although engineers with strong equivalent industry experience will also be considered. You should also be comfortable fault-finding and working through technical problems, with the communication skills to work effectively with engineering, manufacturing, project and customer teams. If you have a background in LV/MV switchgear and are considering your next move, I'd be keen to have a confidential conversation and tell you more about the opportunity.
Panel Wirer Location: Birmingham Salary : Competitive Vacancy Type: Permanent McGeoch Technology Ltd. Have an exciting opportunity for the position of Panel Wirer . The successful applicant will be based at our production, assembly and test facility in Birmingham City Centre, where we design, manufacture, and repair a range of products and services for defence and industrial markets including ATEX Lighting, Electrical Distribution, Instrumentation and Control solutions. Our reputation for integrity is built on compliance with laws and regulations, ethical conduct, and respect for each other, wherever we operate. We are committed to maintaining high standards and are an equal opportunities employer. Our businesses serve a wide range of industries, including Aviation, Space, Defence, Rail, Medical, Scientific and Oil & Gas Sectors (ATEX). Our largest markets are the UK, Europe, and US, but we also have businesses in India and Ireland. The Role Reporting to the Production Manager as part of the assembly team, you will be responsible for electrical / panel and panel wiring for all products in the company catalogue ranging from general light fittings to control & distribution panels supplied to various customers in the Defence industry. Key Areas of Responsibility Your duties will include but not be limited to the following; Wiring and assembly of components for light fittings up to control cabinets and panels Crimping, routing and cable terminating work on control panels Reading and interpreting mechanical drawings and schematic wiring accordingly Mechanical assembly Electrical assembly Use of hand tools Soldering Essential Requirements Experience with point-to-point wiring Cable end termination experience (Crimping/soldering) Ability to understand and manufacture to GA and schematic drawings Control panel wiring experience Cable routing Experience of electrical assembling and wiring of control panels Ability to act as a stand-alone operator on any given project Desired Requirements Manufacturing to IPC Class 3 / IPC 620 standard Prototype and development wiring experience Basic testing experience Ability to down train to lower skilled colleagues in a "buddy system" set up Benefits Competitive salary + Overtime (when required) Employee Assistance Programme Company Sick Pay after 2 years' service Life Assurance Scheme applied after 2 years' service Hours of Work Monday - Thursday 07:30 - 16:00 Friday - 07:30 - 12:30 37 hours total Annual Leave 25 Days holiday; a combination of floating days and compulsory factory shutdown over Christmas period All bank holidays Application question(s): IMPORTANT: Due to the security requirements of the business, you must be a British Citizen and not hold a dual nationality. This means that you cannot be a Citizen or hold a passport to another country. If you have previously held/or were entitled to hold a passport from another country, you would be required to relinquish that citizenship and provide evidence of this. Please answer Yes if you meet this criteria Are you a British National with no Dual Nationality. This is an essential requirement due to working in secure areas To Apply If you feel you are a suitable candidate and would like to work for McGeoch Technology, please do not hesitate to apply.
Oct 07, 2026
Full time
Panel Wirer Location: Birmingham Salary : Competitive Vacancy Type: Permanent McGeoch Technology Ltd. Have an exciting opportunity for the position of Panel Wirer . The successful applicant will be based at our production, assembly and test facility in Birmingham City Centre, where we design, manufacture, and repair a range of products and services for defence and industrial markets including ATEX Lighting, Electrical Distribution, Instrumentation and Control solutions. Our reputation for integrity is built on compliance with laws and regulations, ethical conduct, and respect for each other, wherever we operate. We are committed to maintaining high standards and are an equal opportunities employer. Our businesses serve a wide range of industries, including Aviation, Space, Defence, Rail, Medical, Scientific and Oil & Gas Sectors (ATEX). Our largest markets are the UK, Europe, and US, but we also have businesses in India and Ireland. The Role Reporting to the Production Manager as part of the assembly team, you will be responsible for electrical / panel and panel wiring for all products in the company catalogue ranging from general light fittings to control & distribution panels supplied to various customers in the Defence industry. Key Areas of Responsibility Your duties will include but not be limited to the following; Wiring and assembly of components for light fittings up to control cabinets and panels Crimping, routing and cable terminating work on control panels Reading and interpreting mechanical drawings and schematic wiring accordingly Mechanical assembly Electrical assembly Use of hand tools Soldering Essential Requirements Experience with point-to-point wiring Cable end termination experience (Crimping/soldering) Ability to understand and manufacture to GA and schematic drawings Control panel wiring experience Cable routing Experience of electrical assembling and wiring of control panels Ability to act as a stand-alone operator on any given project Desired Requirements Manufacturing to IPC Class 3 / IPC 620 standard Prototype and development wiring experience Basic testing experience Ability to down train to lower skilled colleagues in a "buddy system" set up Benefits Competitive salary + Overtime (when required) Employee Assistance Programme Company Sick Pay after 2 years' service Life Assurance Scheme applied after 2 years' service Hours of Work Monday - Thursday 07:30 - 16:00 Friday - 07:30 - 12:30 37 hours total Annual Leave 25 Days holiday; a combination of floating days and compulsory factory shutdown over Christmas period All bank holidays Application question(s): IMPORTANT: Due to the security requirements of the business, you must be a British Citizen and not hold a dual nationality. This means that you cannot be a Citizen or hold a passport to another country. If you have previously held/or were entitled to hold a passport from another country, you would be required to relinquish that citizenship and provide evidence of this. Please answer Yes if you meet this criteria Are you a British National with no Dual Nationality. This is an essential requirement due to working in secure areas To Apply If you feel you are a suitable candidate and would like to work for McGeoch Technology, please do not hesitate to apply.
Quality Manager - Manufacturing assembly Quality Manager - Manufacturing assembly with electrification and injection moulding inputs Coventry Up to £70,000 plus car / car allowance, 33 days holiday (including bank holidays), pension, life assurance, employee assistance programme, wellbeing support, and flexible benefits including cycle to work scheme About the Role Unipart Manufacturing is launching a flagship, fast-paced manufacturing project in Coventry, combining high-volume electrification assembly with complex injection moulding inputs. Fully aligned with Unipart's Sector and Growth Strategy and The Unipart Way Forward Plan, this exciting venture will scale rapidly from zero to over 200 team members within a four-month period. We are seeking an experienced Quality Manager to drive quality strategy, regulatory compliance, and system integrity across complex manufacturing assemblies - integrating electrification systems, injection-moulded components, and specialised welding processes. Joining at the ground level, you will establish quality frameworks, oversee supply chain assurance, and ensure absolute adherence to rigorous defence standards in a dynamic, evolving project environment. As part of your key responsibilities you'll focus on: Strategic Quality Leadership - Champion the quality strategy, quality management systems (QMS), and Key Performance Indicators (KPIs) across new product introductions (NPI) and production, driving zero-defect culture and continuous improvement Compliance and Regulatory Oversight - Lead compliance against aerospace and defence quality management systems (AS9100, ISO 9001) and UK MoD procedural standards (AQAP 2110 / DEF STAN 05-61) Specialised Process Governance - Oversee product assurance for complex manufacturing inputs, including electrification safety/ingress standards, plastic injection moulding tolerances, and structural welding operations Customer and Supplier Assurance - Act as the direct quality interface for clients, tier-1 suppliers, and internal management, overseeing 8D problem-solving, concessions, PPAP, and audit frameworks SHE and Safety Management - Ensure all quality activities align strictly with Safety, Health and Environmental (SHE) procedures, statutory legislation, and national security requirements About You We'd love you to have the following skills and experience, but please apply if you think you'd be able to perform well in this role! Proven Quality Leadership - Demonstrated track record as a Quality Manager (or Senior Quality Engineer) leading teams within high-precision manufacturing, automotive, aerospace, or defence environments Technical Standards and Legislation Expertise - In-depth working knowledge of AS9100 / ISO 9001, AQAP 2110, and DEF STANs (e.g., DEF STAN 05-61 for concessions, DEF STAN 61-5 for electrical power safety) Complex Manufacturing Inputs - Hands-on quality experience across electro-mechanical integration, plastic injection moulding tolerances (ISO 20457 / UL 94 flammability), and structural welding standards NPI and Core Quality Tools - Expert in advanced quality planning frameworks including APQP, PPAP, FMEA, SPC, MSA, and root-cause analysis (8D/5-Why) About Unipart We are a supply chain performance improvement partner. We Design, Make, Move, and Improve components in our customers' supply chains, keeping their operations and assets moving and working better, for longer. Through our commitment to continuously driving operational efficiencies, we improve performance - saving time, cost, and carbon. Our ambition is to be the driving force behind efficient, resilient, and sustainable supply chains. Equality, Diversity, and Inclusion We believe that a great workplace is one where you can bring your whole self to work. Our recruitment process is designed to be accessible, inclusive, and based entirely on merit. We define merit through a combination of technical skills and the core behaviours that help our people thrive at Unipart. We welcome applications from everyone, regardless of background or circumstances. We are committed to a policy of equal opportunity that exceeds our statutory obligations under the Equality Act 2010 and subsequent legislation. Whether it's your age, disability, neurodiversity, gender identity, family status, or any other characteristic that makes you 'you' - it is your talent and potential that we value most. Adjustments for you: We want you to perform at your best. If you require any reasonable adjustments or have specific accessibility needs at any stage of the application or interview process, please let us know. We are here to support you. You may have experience in or be interested in the following: quality assurance manager, quality systems manager, compliance manager, quality engineer, QA manager, quality control manager, senior quality engineer, quality and compliance manager, quality assurance lead, quality management systems manager
Oct 07, 2026
Full time
Quality Manager - Manufacturing assembly Quality Manager - Manufacturing assembly with electrification and injection moulding inputs Coventry Up to £70,000 plus car / car allowance, 33 days holiday (including bank holidays), pension, life assurance, employee assistance programme, wellbeing support, and flexible benefits including cycle to work scheme About the Role Unipart Manufacturing is launching a flagship, fast-paced manufacturing project in Coventry, combining high-volume electrification assembly with complex injection moulding inputs. Fully aligned with Unipart's Sector and Growth Strategy and The Unipart Way Forward Plan, this exciting venture will scale rapidly from zero to over 200 team members within a four-month period. We are seeking an experienced Quality Manager to drive quality strategy, regulatory compliance, and system integrity across complex manufacturing assemblies - integrating electrification systems, injection-moulded components, and specialised welding processes. Joining at the ground level, you will establish quality frameworks, oversee supply chain assurance, and ensure absolute adherence to rigorous defence standards in a dynamic, evolving project environment. As part of your key responsibilities you'll focus on: Strategic Quality Leadership - Champion the quality strategy, quality management systems (QMS), and Key Performance Indicators (KPIs) across new product introductions (NPI) and production, driving zero-defect culture and continuous improvement Compliance and Regulatory Oversight - Lead compliance against aerospace and defence quality management systems (AS9100, ISO 9001) and UK MoD procedural standards (AQAP 2110 / DEF STAN 05-61) Specialised Process Governance - Oversee product assurance for complex manufacturing inputs, including electrification safety/ingress standards, plastic injection moulding tolerances, and structural welding operations Customer and Supplier Assurance - Act as the direct quality interface for clients, tier-1 suppliers, and internal management, overseeing 8D problem-solving, concessions, PPAP, and audit frameworks SHE and Safety Management - Ensure all quality activities align strictly with Safety, Health and Environmental (SHE) procedures, statutory legislation, and national security requirements About You We'd love you to have the following skills and experience, but please apply if you think you'd be able to perform well in this role! Proven Quality Leadership - Demonstrated track record as a Quality Manager (or Senior Quality Engineer) leading teams within high-precision manufacturing, automotive, aerospace, or defence environments Technical Standards and Legislation Expertise - In-depth working knowledge of AS9100 / ISO 9001, AQAP 2110, and DEF STANs (e.g., DEF STAN 05-61 for concessions, DEF STAN 61-5 for electrical power safety) Complex Manufacturing Inputs - Hands-on quality experience across electro-mechanical integration, plastic injection moulding tolerances (ISO 20457 / UL 94 flammability), and structural welding standards NPI and Core Quality Tools - Expert in advanced quality planning frameworks including APQP, PPAP, FMEA, SPC, MSA, and root-cause analysis (8D/5-Why) About Unipart We are a supply chain performance improvement partner. We Design, Make, Move, and Improve components in our customers' supply chains, keeping their operations and assets moving and working better, for longer. Through our commitment to continuously driving operational efficiencies, we improve performance - saving time, cost, and carbon. Our ambition is to be the driving force behind efficient, resilient, and sustainable supply chains. Equality, Diversity, and Inclusion We believe that a great workplace is one where you can bring your whole self to work. Our recruitment process is designed to be accessible, inclusive, and based entirely on merit. We define merit through a combination of technical skills and the core behaviours that help our people thrive at Unipart. We welcome applications from everyone, regardless of background or circumstances. We are committed to a policy of equal opportunity that exceeds our statutory obligations under the Equality Act 2010 and subsequent legislation. Whether it's your age, disability, neurodiversity, gender identity, family status, or any other characteristic that makes you 'you' - it is your talent and potential that we value most. Adjustments for you: We want you to perform at your best. If you require any reasonable adjustments or have specific accessibility needs at any stage of the application or interview process, please let us know. We are here to support you. You may have experience in or be interested in the following: quality assurance manager, quality systems manager, compliance manager, quality engineer, QA manager, quality control manager, senior quality engineer, quality and compliance manager, quality assurance lead, quality management systems manager
PowerOn Reliance SCADA Engineer Location: Wokingham / Hybrid Contract: 6+ Months Rate: 510 per day Working Pattern: 2-3 days per week in Wokingham, remainder remote within the UK Clearance: Active SC Clearance required for hybrid working The Role The Energy Division at ARM Recruitment Partner is recruiting multiple PowerOn Reliance SCADA Engineers for a major UK energy sector programme. You will provide expert technical support across SCADA and EMS , focusing on system implementation, configuration, integration and comprehensive testing. You will work with customers, system integrators and internal teams to ensure systems meet operational, technical and industry requirements. Key Responsibilities Provide expert services across GE PowerOn Reliance SCADA/EMS . Configure, validate and test SCADA and EMS functionality and integrations. Develop test scenarios, test cases and test scripts . Review functional designs and ensure requirements are fully tested. Collaborate with SCADA SMEs, Product Owners, developers and testers . Support end-to-end system integration testing. Identify and manage defects, risks and issues . Maintain manual and automated test scripts . Track testing progress using JIRA/XRAY . Support system transition and wider project activities. Essential Skills & Experience Strong hands-on experience with GE PowerOn Reliance (PoR) SCADA . Experience within Transmission SCADA or electricity network environments. Strong SCADA and EMS configuration experience. Experience with Group Telecontrol, Automation, System Tracing, Symbol Design and Alarm Configuration . Experience integrating PoR with external applications and enterprise systems. Experience configuring SCADA for simulation and data-flow testing . Knowledge of PoR components including Application Server, Database Server, FEP, Historian, DPF and Proxy Server . Understanding of PoR cartography, network modelling and topology . Strong knowledge of Windows and Linux environments. Knowledge of IT/OT cybersecurity . Experience developing and executing test plans, test cases and acceptance testing . Knowledge of IEC 101, IEC 104, IEC 61850 and GI 74 . Experience working within Agile/Scrum environments. Experience using JIRA/XRAY or similar tools. Strong understanding of electricity network operations and the utility sector . Desirable Strong client-facing and stakeholder management experience. Experience working with Product Owners, Development, Testing and Implementation teams . Agile project delivery experience. Degree in Electrical Engineering, Electronics, Computer Engineering or related discipline. 10+ years' experience across SCADA implementation, integration, testing and technical consulting . Security Clearance Hybrid candidates must hold active SC clearance . Remote working is only permitted from within UK sovereign territory , as secure equipment cannot be taken overseas. Apply If you have strong PowerOn Reliance SCADA experience and are interested in this contract opportunity, apply now through ARM Recruitment Partner by sending your cv Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Oct 07, 2026
Contractor
PowerOn Reliance SCADA Engineer Location: Wokingham / Hybrid Contract: 6+ Months Rate: 510 per day Working Pattern: 2-3 days per week in Wokingham, remainder remote within the UK Clearance: Active SC Clearance required for hybrid working The Role The Energy Division at ARM Recruitment Partner is recruiting multiple PowerOn Reliance SCADA Engineers for a major UK energy sector programme. You will provide expert technical support across SCADA and EMS , focusing on system implementation, configuration, integration and comprehensive testing. You will work with customers, system integrators and internal teams to ensure systems meet operational, technical and industry requirements. Key Responsibilities Provide expert services across GE PowerOn Reliance SCADA/EMS . Configure, validate and test SCADA and EMS functionality and integrations. Develop test scenarios, test cases and test scripts . Review functional designs and ensure requirements are fully tested. Collaborate with SCADA SMEs, Product Owners, developers and testers . Support end-to-end system integration testing. Identify and manage defects, risks and issues . Maintain manual and automated test scripts . Track testing progress using JIRA/XRAY . Support system transition and wider project activities. Essential Skills & Experience Strong hands-on experience with GE PowerOn Reliance (PoR) SCADA . Experience within Transmission SCADA or electricity network environments. Strong SCADA and EMS configuration experience. Experience with Group Telecontrol, Automation, System Tracing, Symbol Design and Alarm Configuration . Experience integrating PoR with external applications and enterprise systems. Experience configuring SCADA for simulation and data-flow testing . Knowledge of PoR components including Application Server, Database Server, FEP, Historian, DPF and Proxy Server . Understanding of PoR cartography, network modelling and topology . Strong knowledge of Windows and Linux environments. Knowledge of IT/OT cybersecurity . Experience developing and executing test plans, test cases and acceptance testing . Knowledge of IEC 101, IEC 104, IEC 61850 and GI 74 . Experience working within Agile/Scrum environments. Experience using JIRA/XRAY or similar tools. Strong understanding of electricity network operations and the utility sector . Desirable Strong client-facing and stakeholder management experience. Experience working with Product Owners, Development, Testing and Implementation teams . Agile project delivery experience. Degree in Electrical Engineering, Electronics, Computer Engineering or related discipline. 10+ years' experience across SCADA implementation, integration, testing and technical consulting . Security Clearance Hybrid candidates must hold active SC clearance . Remote working is only permitted from within UK sovereign territory , as secure equipment cannot be taken overseas. Apply If you have strong PowerOn Reliance SCADA experience and are interested in this contract opportunity, apply now through ARM Recruitment Partner by sending your cv Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Senior Commissioning MEP Manager £80,000 - £90,000 + Benefits Full-Time Site Based London & Major UK Projects Are you an experienced Commissioning Manager looking to take ownership of complex, high-profile building projects from commissioning through to handover? A leading independent engineering and commissioning consultancy is looking to appoint a Senior Commissioning MEP Manager to support the delivery of major developments across the commercial, data centre, healthcare, mixed-use and mission critical sectors. This is an opportunity to join a highly respected team that has played a key role in the successful delivery of some of the UKs most technically challenging projects, including large-scale commercial headquarters, critical infrastructure facilities, flagship healthcare developments and landmark regeneration schemes. The Role You will be responsible for managing the full commissioning process on major projects, acting as the key interface between clients, contractors, consultants and specialist subcontractors to ensure systems are delivered, tested and handed over to the highest standards. Leading commissioning management activities across complex MEP installations Developing and managing commissioning programmes and strategies Chairing commissioning meetings and coordinating project stakeholders Monitoring commissioning progress and identifying project risks Witnessing testing, validation and system demonstrations Managing integrated systems testing and client handover processes Ensuring compliance with project specifications and industry standards Supporting junior commissioning managers and site teams About You Proven experience in Commissioning Management within the built environment Strong understanding of mechanical, electrical and public health building services systems Experience delivering large and complex projects, ideally within commercial, healthcare, data centre, life sciences or infrastructure sectors Excellent stakeholder management and communication skills Ability to lead multidisciplinary teams through commissioning and handover phases Relevant engineering qualification or equivalent industry experience Whats on Offer? Salary circa £80,000 - £90,000 Exposure to major flagship projects across the UK Opportunity to work alongside some of the industrys most experienced commissioning specialists Clear progression into leadership-level positions Strong pipeline of secured projects across multiple sectors If youre looking to join a business that is trusted to deliver commissioning services on some of the UKs most technically demanding developments, Id be keen to discuss this opportunity further.
Oct 07, 2026
Full time
Senior Commissioning MEP Manager £80,000 - £90,000 + Benefits Full-Time Site Based London & Major UK Projects Are you an experienced Commissioning Manager looking to take ownership of complex, high-profile building projects from commissioning through to handover? A leading independent engineering and commissioning consultancy is looking to appoint a Senior Commissioning MEP Manager to support the delivery of major developments across the commercial, data centre, healthcare, mixed-use and mission critical sectors. This is an opportunity to join a highly respected team that has played a key role in the successful delivery of some of the UKs most technically challenging projects, including large-scale commercial headquarters, critical infrastructure facilities, flagship healthcare developments and landmark regeneration schemes. The Role You will be responsible for managing the full commissioning process on major projects, acting as the key interface between clients, contractors, consultants and specialist subcontractors to ensure systems are delivered, tested and handed over to the highest standards. Leading commissioning management activities across complex MEP installations Developing and managing commissioning programmes and strategies Chairing commissioning meetings and coordinating project stakeholders Monitoring commissioning progress and identifying project risks Witnessing testing, validation and system demonstrations Managing integrated systems testing and client handover processes Ensuring compliance with project specifications and industry standards Supporting junior commissioning managers and site teams About You Proven experience in Commissioning Management within the built environment Strong understanding of mechanical, electrical and public health building services systems Experience delivering large and complex projects, ideally within commercial, healthcare, data centre, life sciences or infrastructure sectors Excellent stakeholder management and communication skills Ability to lead multidisciplinary teams through commissioning and handover phases Relevant engineering qualification or equivalent industry experience Whats on Offer? Salary circa £80,000 - £90,000 Exposure to major flagship projects across the UK Opportunity to work alongside some of the industrys most experienced commissioning specialists Clear progression into leadership-level positions Strong pipeline of secured projects across multiple sectors If youre looking to join a business that is trusted to deliver commissioning services on some of the UKs most technically demanding developments, Id be keen to discuss this opportunity further.
Boat Yard Operative and Marine Technician Main Purpose of Job Assisting refit and repair team to deliver projects of high quality small and large. Marine Services Reports to Head of Marine Services Length of Contract Permanent Location/Branch Cardiff Responsible for Boat Yard Tasks as Directed Negotiable and market facing Main Duties The following are the main duties of the role Colour Matching Laminating Small Mould Fabrication Sanding, fairing, and polishing Brush, roller and spray application Electrical New navigation system installs NMEA integration Systems such as chargers, pumps, bow thrusters etc Full re-wires Fault finding FlexiTeek and teak decking fabrication and install Plug making for GRP and FRP moulds Interior fit out and cabinet making Surface preparation Cutting of fibres and core materials Wet lay and vacuum bagging Boat building and small parts Follow laminate schedule Ensuring workshop is clean and tidy Adhering to Health and Safety protocols Keeping managers informed of broken or missing equipment Stock control and tool maintenance Moving boats as directed Quality control General Supporting other team members as required Administration e.g. completing timesheets Other Knowledge sharing and upskilling other team members Training as required by the role Other tasks reasonably within the scope of the role Support communication and promotion with clients and contracted authorities This job description may be reviewed from time to time and additional tasks assigned to it. Personal Specification Demonstrable Significant Experience Qualifications Boat Building, Electric Systems Forklift Truck and Scissor Lift Machinery Experience Time served in boatyards Knowledge and Skills Gel Coat Repair GRP/FRP Moldings and Repaire Woodwork Electrial Installation Boat Systems Painting At Least One
Oct 07, 2026
Full time
Boat Yard Operative and Marine Technician Main Purpose of Job Assisting refit and repair team to deliver projects of high quality small and large. Marine Services Reports to Head of Marine Services Length of Contract Permanent Location/Branch Cardiff Responsible for Boat Yard Tasks as Directed Negotiable and market facing Main Duties The following are the main duties of the role Colour Matching Laminating Small Mould Fabrication Sanding, fairing, and polishing Brush, roller and spray application Electrical New navigation system installs NMEA integration Systems such as chargers, pumps, bow thrusters etc Full re-wires Fault finding FlexiTeek and teak decking fabrication and install Plug making for GRP and FRP moulds Interior fit out and cabinet making Surface preparation Cutting of fibres and core materials Wet lay and vacuum bagging Boat building and small parts Follow laminate schedule Ensuring workshop is clean and tidy Adhering to Health and Safety protocols Keeping managers informed of broken or missing equipment Stock control and tool maintenance Moving boats as directed Quality control General Supporting other team members as required Administration e.g. completing timesheets Other Knowledge sharing and upskilling other team members Training as required by the role Other tasks reasonably within the scope of the role Support communication and promotion with clients and contracted authorities This job description may be reviewed from time to time and additional tasks assigned to it. Personal Specification Demonstrable Significant Experience Qualifications Boat Building, Electric Systems Forklift Truck and Scissor Lift Machinery Experience Time served in boatyards Knowledge and Skills Gel Coat Repair GRP/FRP Moldings and Repaire Woodwork Electrial Installation Boat Systems Painting At Least One
Integration Manager - UAV Systems London with European Travel UAV / Aerospace / Defence Competitive Package We are recruiting an Integration Manager for a rapidly growing UK autonomous systems business developing and manufacturing advanced UAV platforms for international defence customers. This is a technically focused integration and delivery position responsible for bringing together airframe structures, mechanical systems, avionics, electronics, propulsion and associated sub-systems into completed UAV platforms. We are specifically looking for someone who has previously been responsible for the physical build and integration of complex engineered products. If your background is primarily project management without significant engineering, manufacturing or integration experience, this is unlikely to be the right role. The role You will take ownership of UAV integration from the availability of components and major sub-assemblies through to completed, configured and test-ready aircraft. Working across engineering, production, quality, supply chain and specialist subcontractors, you will be responsible for ensuring aircraft are built to the correct specification, configuration, quality and delivery schedule. Key responsibilities will include: Owning the end-to-end build and integration plan for complete UAV platforms Coordinating the integration of composite airframes, mechanical assemblies, avionics, electronics, propulsion and electrical systems Managing build sequence and ensuring components and sub-assemblies are available at the correct point in the integration programme Understanding and managing mechanical and electrical interfaces between aircraft sub-systems Reviewing engineering drawings, BOMs, build documentation and manufacturing instructions Ensuring the correct engineering configuration is maintained throughout aircraft build Working directly with engineering teams to resolve build and integration problems Managing engineering changes through the build process Investigating integration failures, non-conformances and recurring build issues Driving root-cause analysis and corrective actions Coordinating system-level testing and fault-finding activity Ensuring completed aircraft are ready for acceptance and subsequent customer delivery Managing production and quality engineering activity at subcontractor sites Driving subcontractor performance against technical, quality and delivery requirements Identifying integration and production risks before they impact programme delivery Improving build methodology, integration processes and manufacturing repeatability as volumes increase The role involves working closely with integration partners in Poland and the Netherlands, so regular European travel will be required. Essential experience We are looking for candidates who can demonstrate significant experience in complex systems integration, vehicle/aircraft build or multidisciplinary manufacturing. Strong experience across several of the following: Integration of complex electro-mechanical products or platforms Aircraft, UAV, vehicle or similarly complex system build Mechanical assembly and installation Electrical and electronic systems integration Wiring looms, harnesses, connectors and electrical installation Avionics or embedded electronic systems Power distribution and electrical architectures Propulsion system installation/integration Structural and mechanical interfaces Configuration management and build configuration control Engineering drawings and technical documentation Bills of Materials / BOM control Engineering Change Requests / Orders Manufacturing and assembly instructions Non-conformance management Root Cause Analysis / corrective action Production engineering System-level fault finding Verification, test and acceptance activity Supplier or subcontract manufacturing management Crucially, you need to understand how individual mechanical, electrical and electronic systems come together to create a functioning complete product. Your background Direct UAV experience would be highly attractive, but it isn't mandatory. Strong candidates could come from: UAV / UAS Aerospace Defence Formula 1 / Motorsport Advanced Automotive Robotics Autonomous Systems Complex Electro-Mechanical Manufacturing We are particularly interested in candidates from environments where: products are technically complex build volumes are relatively low specifications continue to evolve engineering changes need to be introduced quickly quality standards are demanding delivery deadlines cannot move This makes Formula 1 and high-performance motorsport particularly interesting backgrounds alongside UAV and aerospace. What we don't need This is not a pure Programme Manager, Project Manager or general Production Manager position. You must have enough technical and manufacturing understanding to walk onto an integration floor, understand what is preventing a system from being completed, challenge the relevant engineering discipline and drive the problem through to resolution. You'll combine that technical credibility with the organisation and leadership required to keep multiple aircraft, suppliers, engineers and production activities aligned. The opportunity You'll join the business at a point where it is moving from relatively low-volume builds towards significantly greater production. That means you'll have the opportunity to influence how aircraft are: built integrated configured tested released industrialised If you have previously taken responsibility for getting complex aircraft, vehicles or electro-mechanical platforms successfully through build and integration, we'd like to hear from you
Oct 07, 2026
Full time
Integration Manager - UAV Systems London with European Travel UAV / Aerospace / Defence Competitive Package We are recruiting an Integration Manager for a rapidly growing UK autonomous systems business developing and manufacturing advanced UAV platforms for international defence customers. This is a technically focused integration and delivery position responsible for bringing together airframe structures, mechanical systems, avionics, electronics, propulsion and associated sub-systems into completed UAV platforms. We are specifically looking for someone who has previously been responsible for the physical build and integration of complex engineered products. If your background is primarily project management without significant engineering, manufacturing or integration experience, this is unlikely to be the right role. The role You will take ownership of UAV integration from the availability of components and major sub-assemblies through to completed, configured and test-ready aircraft. Working across engineering, production, quality, supply chain and specialist subcontractors, you will be responsible for ensuring aircraft are built to the correct specification, configuration, quality and delivery schedule. Key responsibilities will include: Owning the end-to-end build and integration plan for complete UAV platforms Coordinating the integration of composite airframes, mechanical assemblies, avionics, electronics, propulsion and electrical systems Managing build sequence and ensuring components and sub-assemblies are available at the correct point in the integration programme Understanding and managing mechanical and electrical interfaces between aircraft sub-systems Reviewing engineering drawings, BOMs, build documentation and manufacturing instructions Ensuring the correct engineering configuration is maintained throughout aircraft build Working directly with engineering teams to resolve build and integration problems Managing engineering changes through the build process Investigating integration failures, non-conformances and recurring build issues Driving root-cause analysis and corrective actions Coordinating system-level testing and fault-finding activity Ensuring completed aircraft are ready for acceptance and subsequent customer delivery Managing production and quality engineering activity at subcontractor sites Driving subcontractor performance against technical, quality and delivery requirements Identifying integration and production risks before they impact programme delivery Improving build methodology, integration processes and manufacturing repeatability as volumes increase The role involves working closely with integration partners in Poland and the Netherlands, so regular European travel will be required. Essential experience We are looking for candidates who can demonstrate significant experience in complex systems integration, vehicle/aircraft build or multidisciplinary manufacturing. Strong experience across several of the following: Integration of complex electro-mechanical products or platforms Aircraft, UAV, vehicle or similarly complex system build Mechanical assembly and installation Electrical and electronic systems integration Wiring looms, harnesses, connectors and electrical installation Avionics or embedded electronic systems Power distribution and electrical architectures Propulsion system installation/integration Structural and mechanical interfaces Configuration management and build configuration control Engineering drawings and technical documentation Bills of Materials / BOM control Engineering Change Requests / Orders Manufacturing and assembly instructions Non-conformance management Root Cause Analysis / corrective action Production engineering System-level fault finding Verification, test and acceptance activity Supplier or subcontract manufacturing management Crucially, you need to understand how individual mechanical, electrical and electronic systems come together to create a functioning complete product. Your background Direct UAV experience would be highly attractive, but it isn't mandatory. Strong candidates could come from: UAV / UAS Aerospace Defence Formula 1 / Motorsport Advanced Automotive Robotics Autonomous Systems Complex Electro-Mechanical Manufacturing We are particularly interested in candidates from environments where: products are technically complex build volumes are relatively low specifications continue to evolve engineering changes need to be introduced quickly quality standards are demanding delivery deadlines cannot move This makes Formula 1 and high-performance motorsport particularly interesting backgrounds alongside UAV and aerospace. What we don't need This is not a pure Programme Manager, Project Manager or general Production Manager position. You must have enough technical and manufacturing understanding to walk onto an integration floor, understand what is preventing a system from being completed, challenge the relevant engineering discipline and drive the problem through to resolution. You'll combine that technical credibility with the organisation and leadership required to keep multiple aircraft, suppliers, engineers and production activities aligned. The opportunity You'll join the business at a point where it is moving from relatively low-volume builds towards significantly greater production. That means you'll have the opportunity to influence how aircraft are: built integrated configured tested released industrialised If you have previously taken responsibility for getting complex aircraft, vehicles or electro-mechanical platforms successfully through build and integration, we'd like to hear from you
Senior Electrical Design Engineer Location: Samlesbury, Lancashire, North West England Job Type: Contract, Full-Time hours Primary Industry: Aerospace and Aviation Secondary Industry: Engineering Salary: £35.00 - £47.12 per hour Job Description As a Senior Electrical Design Engineer, you are responsible for leading the design and development of electrical systems and components within aerospace projects. You apply advanced engineering principles to produce detailed designs, ensuring compliance with industry standards and client requirements. You collaborate closely with multidisciplinary teams to deliver innovative solutions that meet technical, regulatory and operational demands. Job Duties Develop and produce detailed electrical design documentation, including schematics, wiring diagrams, and system architecture. Lead design reviews and provide technical guidance to junior engineers and design teams. Ensure all electrical designs comply with relevant aerospace standards, safety regulations and quality assurance protocols. Conduct feasibility studies, risk assessments and failure mode analyses for electrical systems. Collaborate with systems engineers, mechanical engineers and project managers to integrate electrical designs within overall project frameworks. Support the preparation of technical proposals, cost estimations and project schedules. Identify and implement design improvements to enhance system performance, reliability and maintainability. Participate in testing and validation activities to verify design integrity and functionality. Maintain up-to-date knowledge of emerging technologies, industry trends and best practises relevant to aerospace electrical engineering. Required Qualifications Degree in Electrical Engineering or a closely related discipline from a recognised institution. Professional Engineering registration or working towards registration is desirable. Education Bachelor's degree in Electrical Engineering or equivalent qualification. Postgraduate qualifications in aerospace engineering or related fields are advantageous but not essential. Experience Minimum of five years' experience in electrical design engineering within the aerospace or aviation sectors. Proven experience producing complex electrical system designs and documentation. Experience working on projects involving aircraft electrical systems, wiring harnesses and avionics is preferred. Previous involvement in contract-based engineering roles is advantageous. Knowledge and Skills In-depth knowledge of aerospace electrical standards and regulations, including electrical safety and certification requirements. Strong proficiency in electrical design tools, such as CAD software and schematic capture applications. Excellent analytical and problem-solving skills with attention to detail. Ability to communicate complex technical information clearly and effectively, both verbally and in writing. Strong organisational skills with the ability to manage multiple tasks and meet deadlines. Demonstrated leadership capability and experience in mentoring junior team members. Preferred Qualifications Chartered Engineer status or equivalent professional accreditation. Experience with software tools specific to aerospace electrical design and simulation. Familiarity with project management methodologies and working within Agile or similar frameworks. Understanding of mechanical and systems engineering principles to support multidisciplinary collaboration. Working Conditions Based primarily at the client's site in Samlesbury, Lancashire, with standard full-time hours expected. Occasional requirement to work additional hours to meet project deadlines. Work involves use of computer-based design software and participation in design review meetings. Compliance with health and safety regulations in an engineering and aerospace environment is mandatory. Potential for limited travel to other sites or suppliers as required by project demands
Oct 07, 2026
Full time
Senior Electrical Design Engineer Location: Samlesbury, Lancashire, North West England Job Type: Contract, Full-Time hours Primary Industry: Aerospace and Aviation Secondary Industry: Engineering Salary: £35.00 - £47.12 per hour Job Description As a Senior Electrical Design Engineer, you are responsible for leading the design and development of electrical systems and components within aerospace projects. You apply advanced engineering principles to produce detailed designs, ensuring compliance with industry standards and client requirements. You collaborate closely with multidisciplinary teams to deliver innovative solutions that meet technical, regulatory and operational demands. Job Duties Develop and produce detailed electrical design documentation, including schematics, wiring diagrams, and system architecture. Lead design reviews and provide technical guidance to junior engineers and design teams. Ensure all electrical designs comply with relevant aerospace standards, safety regulations and quality assurance protocols. Conduct feasibility studies, risk assessments and failure mode analyses for electrical systems. Collaborate with systems engineers, mechanical engineers and project managers to integrate electrical designs within overall project frameworks. Support the preparation of technical proposals, cost estimations and project schedules. Identify and implement design improvements to enhance system performance, reliability and maintainability. Participate in testing and validation activities to verify design integrity and functionality. Maintain up-to-date knowledge of emerging technologies, industry trends and best practises relevant to aerospace electrical engineering. Required Qualifications Degree in Electrical Engineering or a closely related discipline from a recognised institution. Professional Engineering registration or working towards registration is desirable. Education Bachelor's degree in Electrical Engineering or equivalent qualification. Postgraduate qualifications in aerospace engineering or related fields are advantageous but not essential. Experience Minimum of five years' experience in electrical design engineering within the aerospace or aviation sectors. Proven experience producing complex electrical system designs and documentation. Experience working on projects involving aircraft electrical systems, wiring harnesses and avionics is preferred. Previous involvement in contract-based engineering roles is advantageous. Knowledge and Skills In-depth knowledge of aerospace electrical standards and regulations, including electrical safety and certification requirements. Strong proficiency in electrical design tools, such as CAD software and schematic capture applications. Excellent analytical and problem-solving skills with attention to detail. Ability to communicate complex technical information clearly and effectively, both verbally and in writing. Strong organisational skills with the ability to manage multiple tasks and meet deadlines. Demonstrated leadership capability and experience in mentoring junior team members. Preferred Qualifications Chartered Engineer status or equivalent professional accreditation. Experience with software tools specific to aerospace electrical design and simulation. Familiarity with project management methodologies and working within Agile or similar frameworks. Understanding of mechanical and systems engineering principles to support multidisciplinary collaboration. Working Conditions Based primarily at the client's site in Samlesbury, Lancashire, with standard full-time hours expected. Occasional requirement to work additional hours to meet project deadlines. Work involves use of computer-based design software and participation in design review meetings. Compliance with health and safety regulations in an engineering and aerospace environment is mandatory. Potential for limited travel to other sites or suppliers as required by project demands
Project Manager Birmingham 55,000 - 60,000 + 6,000 Car Allowance + Remote Working + Progression + Renewable Energy An excellent opportunity for an experienced Project Manager, ideally with an electrical bias, to join a rapidly growing renewable energy business at an exciting stage of its development. With strong progression opportunities, increasing project volumes and the backing of a larger group, this is a fantastic opportunity for someone looking to build a long-term career while taking responsibility for high-value commercial Solar PV projects. Having recently joined a larger group, the business is building a strong reputation within the renewable energy sector and has ambitious plans to significantly expand its operations. With a growing pipeline of commercial Solar PV projects and a clear focus on continued growth, they are looking for motivated individuals who want to play a key role in a business preparing to boom. As a Project Manager, your responsibilities will include: Managing commercial Solar PV projects from handover through to completion, ensuring they are delivered on time, to budget and to the required standards Coordinating subcontractors, labour, materials and procurement throughout the project lifecycle Overseeing health and safety, compliance, site coordination and snagging Acting as the central point of coordination between design, technical teams, subcontractors and clients The successful Project Manager should have: Strong project delivery, coordination and site-management experience within electrical, construction, M&E, engineering or a similar environment An electrical bias or experience working on electrical installation, renewable energy or Solar PV projects is highly desirable Experience managing subcontractors and external stakeholders rather than carrying out installation work directly Strong commercial awareness, organisation and communication skills with the ability to manage projects independently Please apply to Harley Reynolds at Accelerated People Management for immediate consideration. This vacancy is being advertised by Accelerated People Management Ltd. The services of Accelerated People Management Ltd are that of an Employment Agency. Accelerated People Management Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.
Oct 07, 2026
Full time
Project Manager Birmingham 55,000 - 60,000 + 6,000 Car Allowance + Remote Working + Progression + Renewable Energy An excellent opportunity for an experienced Project Manager, ideally with an electrical bias, to join a rapidly growing renewable energy business at an exciting stage of its development. With strong progression opportunities, increasing project volumes and the backing of a larger group, this is a fantastic opportunity for someone looking to build a long-term career while taking responsibility for high-value commercial Solar PV projects. Having recently joined a larger group, the business is building a strong reputation within the renewable energy sector and has ambitious plans to significantly expand its operations. With a growing pipeline of commercial Solar PV projects and a clear focus on continued growth, they are looking for motivated individuals who want to play a key role in a business preparing to boom. As a Project Manager, your responsibilities will include: Managing commercial Solar PV projects from handover through to completion, ensuring they are delivered on time, to budget and to the required standards Coordinating subcontractors, labour, materials and procurement throughout the project lifecycle Overseeing health and safety, compliance, site coordination and snagging Acting as the central point of coordination between design, technical teams, subcontractors and clients The successful Project Manager should have: Strong project delivery, coordination and site-management experience within electrical, construction, M&E, engineering or a similar environment An electrical bias or experience working on electrical installation, renewable energy or Solar PV projects is highly desirable Experience managing subcontractors and external stakeholders rather than carrying out installation work directly Strong commercial awareness, organisation and communication skills with the ability to manage projects independently Please apply to Harley Reynolds at Accelerated People Management for immediate consideration. This vacancy is being advertised by Accelerated People Management Ltd. The services of Accelerated People Management Ltd are that of an Employment Agency. Accelerated People Management Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.
At Nscale, we are building the infrastructure for Europe's AI revolution. Nscale are developing cutting edge sovereign generative AI solutions, powered by a new generation of high performance, sustainable data centres and GPUs built specifically for AI workloads. The growth of artificial intelligence is driving unprecedented global demand for compute and GPU infrastructure. Nscale is positioned at the heart of this transformation - building the platforms that will enable the next decade of innovation. Nscale are working closely with the world's most advanced AI technology providers, integrating next gen compute hardware and GPU clusters in both partner and Nscale built facilities. This is an opportunity to join Nscale's journey, play a key role in delivering transformative AI infrastructure, and help shape a company designed to scale rapidly across Europe and beyond. The Role The Design Manager will oversee the technical design and permitting of AI optimized data centres across Europe. Reporting to the Development Director, these roles will be essential in ensuring our facilities are built to world class technical standards, delivered on schedule, to budget, and adaptable to the rapidly evolving needs of AI compute. You'll work together with Construction, Cost Management, and in country delivery teams, as well as collaborating with key technology providers and external design partners to bring high density infrastructure from concept to reality. Key Responsibilities Involvement in the full lifecycle of data centre and infrastructure design - from concept development through construction drawings - Nscale's solution is tailored to support dense AI compute, low latency workloads, and high efficiency operations. Collaborate closely with internal stakeholders (Senior Design Managers, construction, cost, engineering, in country teams) and external consultants (architects, MEP, CSA) to align design with business objectives and project needs. Oversee and manage permitting processes across multiple European jurisdictions; coordinate with local consultants and public authorities to secure approvals. Design and adapt facilities to accommodate advanced compute clusters, high power electrical infrastructure, and liquid cooling solutions. Familiarity with modern AI compute architecture is a strong advantage. Manage internal alignment and external consultant teams, ensuring cohesive, accurate, and high quality design deliverables that meet technical and operational standards. Review design packages for code compliance, constructability, and performance. Identify risks early and implement design changes to maintain project trajectory. Maintain project schedules, deliverable tracking, and clear documentation workflows using BIM and cloud based collaboration tools. Who You Are Experienced - 6+ years in design or design management, preferably in data centre, mission critical, or high performance computing projects. Engineering Expertise - Mechanical or Electrical Design background Permitting Savvy - Proven experience delivering permits across European jurisdictions. Technically Strong - Deep knowledge of MEP systems, high density power, and infrastructure suited for AI compute. Collaborative - Comfortable working across teams and time zones, including remote and hybrid models. NScale's culture is to build collaborative teams of which you will be an integral part. Multilingual - Fluency in English is required; other European languages are an advantage. Digitally Fluent - Proficient with Revit, Navisworks, and BIM based workflows. Startup Ready - Flexible, proactive, and ready to help build world leading AI systems, culture, and scale. For information on how Nscale handles candidate personal data, please see our Employee & Candidate Privacy Notice: Here.
Oct 07, 2026
Full time
At Nscale, we are building the infrastructure for Europe's AI revolution. Nscale are developing cutting edge sovereign generative AI solutions, powered by a new generation of high performance, sustainable data centres and GPUs built specifically for AI workloads. The growth of artificial intelligence is driving unprecedented global demand for compute and GPU infrastructure. Nscale is positioned at the heart of this transformation - building the platforms that will enable the next decade of innovation. Nscale are working closely with the world's most advanced AI technology providers, integrating next gen compute hardware and GPU clusters in both partner and Nscale built facilities. This is an opportunity to join Nscale's journey, play a key role in delivering transformative AI infrastructure, and help shape a company designed to scale rapidly across Europe and beyond. The Role The Design Manager will oversee the technical design and permitting of AI optimized data centres across Europe. Reporting to the Development Director, these roles will be essential in ensuring our facilities are built to world class technical standards, delivered on schedule, to budget, and adaptable to the rapidly evolving needs of AI compute. You'll work together with Construction, Cost Management, and in country delivery teams, as well as collaborating with key technology providers and external design partners to bring high density infrastructure from concept to reality. Key Responsibilities Involvement in the full lifecycle of data centre and infrastructure design - from concept development through construction drawings - Nscale's solution is tailored to support dense AI compute, low latency workloads, and high efficiency operations. Collaborate closely with internal stakeholders (Senior Design Managers, construction, cost, engineering, in country teams) and external consultants (architects, MEP, CSA) to align design with business objectives and project needs. Oversee and manage permitting processes across multiple European jurisdictions; coordinate with local consultants and public authorities to secure approvals. Design and adapt facilities to accommodate advanced compute clusters, high power electrical infrastructure, and liquid cooling solutions. Familiarity with modern AI compute architecture is a strong advantage. Manage internal alignment and external consultant teams, ensuring cohesive, accurate, and high quality design deliverables that meet technical and operational standards. Review design packages for code compliance, constructability, and performance. Identify risks early and implement design changes to maintain project trajectory. Maintain project schedules, deliverable tracking, and clear documentation workflows using BIM and cloud based collaboration tools. Who You Are Experienced - 6+ years in design or design management, preferably in data centre, mission critical, or high performance computing projects. Engineering Expertise - Mechanical or Electrical Design background Permitting Savvy - Proven experience delivering permits across European jurisdictions. Technically Strong - Deep knowledge of MEP systems, high density power, and infrastructure suited for AI compute. Collaborative - Comfortable working across teams and time zones, including remote and hybrid models. NScale's culture is to build collaborative teams of which you will be an integral part. Multilingual - Fluency in English is required; other European languages are an advantage. Digitally Fluent - Proficient with Revit, Navisworks, and BIM based workflows. Startup Ready - Flexible, proactive, and ready to help build world leading AI systems, culture, and scale. For information on how Nscale handles candidate personal data, please see our Employee & Candidate Privacy Notice: Here.
Egis is a leading global consulting, construction engineering and operating firm. We work together with our clients, across every aspect of transport, energy, and the built environment to build a more balanced, sustainable, and resilient world. The Egis Group has more than 50 years of experience and a team of 23,500 employees in over 70 countries around the world. Joining our Group means, above all, sharing our values as a people-first company, strongly committed to sustainability and innovation. In the UK and Ireland, we are proud to be delivering some of the most iconic projects which help connect people, protect our environment, and meet emission reduction targets. From highways, rail and operations and maintenance, to energy, water, nuclear and smart infrastructure, clients choose us to help them solve their most complex challenges - delivering climate-responsible growth that meets the needs of communities, industry and the planet. Job Description Egis is seeking an experienced Systems Integration Manager to lead the delivery of systems engineering, systems integration, systems assurance, and safety assurance activities across major rail and transportation programmes. The successful candidate will provide both technical and people leadership, managing a team of Systems Engineers, Systems Integration Engineers and Safety Assurance specialists while ensuring the successful delivery of projects throughout the systems engineering lifecycle. The role will be responsible for establishing systems engineering best practice, ensuring safe and integrated solutions are delivered, and supporting the growth and development of Egis' Systems Integration capability within the UK and internationally. Key Responsibilities Leadership & People Management Lead, develop and manage a team of Systems Engineers, Systems Integration Engineers and Safety Assurance professionals. Act as the line manager for assigned team members, undertaking resource management, performance management, career development planning and objective setting. Provide coaching, mentoring and technical guidance to support professional growth and succession planning. Manage team resource allocation and capacity planning across projects to ensure effective utilisation and delivery. Support staff in achieving professional accreditation, including Chartered Engineer status and other relevant industry recognitions. Foster a collaborative, inclusive and high-performing team culture aligned with Egis values. Identify capability gaps and lead initiatives to strengthen technical competence within the Systems Integration function. Support recruitment activities, including interviewing, onboarding and growing the Systems Integration team. Systems Engineering & Integration Lead the application of systems Integration principles across the full project lifecycle. Develop and implement systems integration strategies across multidisciplinary rail and transportation projects. Manage complex technical interfaces between signalling, telecommunications, rolling stock, power, stations, track, operational and maintenance systems. Ensure requirements are captured, allocated, managed and traced using recognised systems Integration methodologies. Coordinate multidisciplinary engineering teams to deliver integrated and compliant solutions. Lead systems architecture development, interface management and operational concept activities. Facilitate technical workshops, design reviews and integration forums with clients and project stakeholders. Review and approve systems engineering and integration deliverables. Safety Assurance Lead the delivery of safety assurance activities across projects and programmes. Establish and maintain Safety Assurance Plans, Safety Cases and Hazard Management processes. Ensure compliance with applicable regulations and standards, including CDM, CSM-RA, RIR and interoperability requirements. Lead hazard identification and risk assessment activities, including HAZID, HAZOP and safety workshops. Manage interfaces with Independent Safety Assessors (ISA), Assessment Bodies (AsBo), NoBo and DeBo organisations. Ensure safety requirements are effectively translated into design, testing, commissioning and operational readiness activities. Promote a strong safety culture across project teams and within the Systems Integration function. Systems Assurance & Verification Lead systems assurance activities to demonstrate compliance with client, regulatory and project requirements. Manage requirements verification and validation (V&V) activities throughout the project lifecycle. Coordinate testing, commissioning and assurance programmes to demonstrate system performance and compliance. Ensure assurance evidence is collated and maintained to support project approvals and authorisation. Implement best-practice assurance processes and continuous improvement initiatives across projects. Client & Business Leadership Act as a trusted technical advisor to clients and project stakeholders. Support business development, bid preparation and proposal activities. Identify opportunities to grow Egis' Systems Integration and Safety Assurance services. Support project directors and discipline leads in developing delivery strategies and technical solutions. Represent Egis at client meetings, industry working groups and professional forums. Contribute to the development of standards, methodologies and technical excellence initiatives across the business Qualifications Essential Degree qualified in Systems Engineering, Railway Engineering, Electrical Engineering, Mechanical Engineering or a related discipline. Significant experience in Systems Engineering, Systems Integration and Safety Assurance within the rail industry. Experience leading and managing engineering teams within a consultancy, contractor or client organisation. Strong understanding of railway systems and multidisciplinary engineering integration. Extensive knowledge of: Systems Integration Requirements Management Interface Management Verification & Validation (V&V) Systems Assurance CSM-RA CDM Regulations Railways Interoperability Regulations (RIR) Safety Cases and Hazard Management Strong stakeholder and client management capabilities. Excellent leadership, communication and organisational skills. Desirable Chartered Engineer (CEng) status. Experience delivering projects for HS2, Network Rail, TfL, metro, light rail or international rail programmes. Experience using requirements management tools such as DOORS or equivalent. Knowledge of relevant industry standards. Experience managing multidisciplinary engineering teams across large infrastructure projects. Additional Information YOU MUST HAVE THE RIGHT TO WORK IN THE UK. Equality, Diversity & Inclusion Egis is committed to promoting diversity and inclusion. We welcome applications from candidates of all backgrounds and experiences. We at EGIS are an Equal Opportunities employer and we recognise the value of a Diverse Organisation. EGIS appreciates all job applications. If you decide to apply for an opportunity at EGIS, your application will be assessed based purely on your experience, the essential and desirable criteria, and your suitability for the role. We value each and everyone's contribution as this builds our culture and means, if you work for EGIS, you will be included, listened to, and respected.
Oct 07, 2026
Full time
Egis is a leading global consulting, construction engineering and operating firm. We work together with our clients, across every aspect of transport, energy, and the built environment to build a more balanced, sustainable, and resilient world. The Egis Group has more than 50 years of experience and a team of 23,500 employees in over 70 countries around the world. Joining our Group means, above all, sharing our values as a people-first company, strongly committed to sustainability and innovation. In the UK and Ireland, we are proud to be delivering some of the most iconic projects which help connect people, protect our environment, and meet emission reduction targets. From highways, rail and operations and maintenance, to energy, water, nuclear and smart infrastructure, clients choose us to help them solve their most complex challenges - delivering climate-responsible growth that meets the needs of communities, industry and the planet. Job Description Egis is seeking an experienced Systems Integration Manager to lead the delivery of systems engineering, systems integration, systems assurance, and safety assurance activities across major rail and transportation programmes. The successful candidate will provide both technical and people leadership, managing a team of Systems Engineers, Systems Integration Engineers and Safety Assurance specialists while ensuring the successful delivery of projects throughout the systems engineering lifecycle. The role will be responsible for establishing systems engineering best practice, ensuring safe and integrated solutions are delivered, and supporting the growth and development of Egis' Systems Integration capability within the UK and internationally. Key Responsibilities Leadership & People Management Lead, develop and manage a team of Systems Engineers, Systems Integration Engineers and Safety Assurance professionals. Act as the line manager for assigned team members, undertaking resource management, performance management, career development planning and objective setting. Provide coaching, mentoring and technical guidance to support professional growth and succession planning. Manage team resource allocation and capacity planning across projects to ensure effective utilisation and delivery. Support staff in achieving professional accreditation, including Chartered Engineer status and other relevant industry recognitions. Foster a collaborative, inclusive and high-performing team culture aligned with Egis values. Identify capability gaps and lead initiatives to strengthen technical competence within the Systems Integration function. Support recruitment activities, including interviewing, onboarding and growing the Systems Integration team. Systems Engineering & Integration Lead the application of systems Integration principles across the full project lifecycle. Develop and implement systems integration strategies across multidisciplinary rail and transportation projects. Manage complex technical interfaces between signalling, telecommunications, rolling stock, power, stations, track, operational and maintenance systems. Ensure requirements are captured, allocated, managed and traced using recognised systems Integration methodologies. Coordinate multidisciplinary engineering teams to deliver integrated and compliant solutions. Lead systems architecture development, interface management and operational concept activities. Facilitate technical workshops, design reviews and integration forums with clients and project stakeholders. Review and approve systems engineering and integration deliverables. Safety Assurance Lead the delivery of safety assurance activities across projects and programmes. Establish and maintain Safety Assurance Plans, Safety Cases and Hazard Management processes. Ensure compliance with applicable regulations and standards, including CDM, CSM-RA, RIR and interoperability requirements. Lead hazard identification and risk assessment activities, including HAZID, HAZOP and safety workshops. Manage interfaces with Independent Safety Assessors (ISA), Assessment Bodies (AsBo), NoBo and DeBo organisations. Ensure safety requirements are effectively translated into design, testing, commissioning and operational readiness activities. Promote a strong safety culture across project teams and within the Systems Integration function. Systems Assurance & Verification Lead systems assurance activities to demonstrate compliance with client, regulatory and project requirements. Manage requirements verification and validation (V&V) activities throughout the project lifecycle. Coordinate testing, commissioning and assurance programmes to demonstrate system performance and compliance. Ensure assurance evidence is collated and maintained to support project approvals and authorisation. Implement best-practice assurance processes and continuous improvement initiatives across projects. Client & Business Leadership Act as a trusted technical advisor to clients and project stakeholders. Support business development, bid preparation and proposal activities. Identify opportunities to grow Egis' Systems Integration and Safety Assurance services. Support project directors and discipline leads in developing delivery strategies and technical solutions. Represent Egis at client meetings, industry working groups and professional forums. Contribute to the development of standards, methodologies and technical excellence initiatives across the business Qualifications Essential Degree qualified in Systems Engineering, Railway Engineering, Electrical Engineering, Mechanical Engineering or a related discipline. Significant experience in Systems Engineering, Systems Integration and Safety Assurance within the rail industry. Experience leading and managing engineering teams within a consultancy, contractor or client organisation. Strong understanding of railway systems and multidisciplinary engineering integration. Extensive knowledge of: Systems Integration Requirements Management Interface Management Verification & Validation (V&V) Systems Assurance CSM-RA CDM Regulations Railways Interoperability Regulations (RIR) Safety Cases and Hazard Management Strong stakeholder and client management capabilities. Excellent leadership, communication and organisational skills. Desirable Chartered Engineer (CEng) status. Experience delivering projects for HS2, Network Rail, TfL, metro, light rail or international rail programmes. Experience using requirements management tools such as DOORS or equivalent. Knowledge of relevant industry standards. Experience managing multidisciplinary engineering teams across large infrastructure projects. Additional Information YOU MUST HAVE THE RIGHT TO WORK IN THE UK. Equality, Diversity & Inclusion Egis is committed to promoting diversity and inclusion. We welcome applications from candidates of all backgrounds and experiences. We at EGIS are an Equal Opportunities employer and we recognise the value of a Diverse Organisation. EGIS appreciates all job applications. If you decide to apply for an opportunity at EGIS, your application will be assessed based purely on your experience, the essential and desirable criteria, and your suitability for the role. We value each and everyone's contribution as this builds our culture and means, if you work for EGIS, you will be included, listened to, and respected.
