Contract Test Technician - Dyno / Motor Testing Norwich, Norfolk 3 month Contract (likely extension) Up to £55ph, outside IR35 Overtime Available Start ASAP The Role A specialist electronics engineering client of ours is looking for an experienced Test Technician to join their team on an urgent contract basis click apply for full job details
May 05, 2026
Contractor
Contract Test Technician - Dyno / Motor Testing Norwich, Norfolk 3 month Contract (likely extension) Up to £55ph, outside IR35 Overtime Available Start ASAP The Role A specialist electronics engineering client of ours is looking for an experienced Test Technician to join their team on an urgent contract basis click apply for full job details
Role: Test Technician Location: Fareham Rate: 27.50/hr PAYE Duration: 6 months Hours: 37hrs - (Mon - Thur 14:00-22:30 / Fri 11:00-16:00) Position Summary The Production Test Technician, completes work according to instructions, specifications and procedures. Conducts a variety of verification tests and calibration on electronic and electromechanical equipment with the use of a range of common electronics measurement equipment and specialist type test equipment. Essential Job Duties and Responsibilities Sets up and operates equipment to test/calibrate units/subassemblies as per instructions, specifications and procedures. Performs troubleshooting and failure analysis of analog and digital circuitry to component level Provides detailed written failure description with root cause analysis to production and engineering. Follows written and verbal instructions, adheres to all company guidelines, policies and procedures. Carries out production/repair/assembly work as required within multiple departments on this site. Maintains a safe and clean work environment and follows company safety policies. Regular, consistent and punctual attendance is required. May need to work additional hours as necessary on evenings/weekends during periods of increased demand. Skills, Knowledge and Abilities List Well-organized, detail-oriented, and ability to multi-task Ability to understand and follow specific instructions and procedures Ability to work independently and prioritize duties with minimal supervision, in order to meet deadlines Skilled in the use of test equipment, hand tools, power tools and electric soldering Good reading and comprehension skills to understand regulations and instructions Ability to analyze and determine methods and procedures Good oral and written communication skills and attention to detail Proficient Microsoft Windows software applications
May 05, 2026
Contractor
Role: Test Technician Location: Fareham Rate: 27.50/hr PAYE Duration: 6 months Hours: 37hrs - (Mon - Thur 14:00-22:30 / Fri 11:00-16:00) Position Summary The Production Test Technician, completes work according to instructions, specifications and procedures. Conducts a variety of verification tests and calibration on electronic and electromechanical equipment with the use of a range of common electronics measurement equipment and specialist type test equipment. Essential Job Duties and Responsibilities Sets up and operates equipment to test/calibrate units/subassemblies as per instructions, specifications and procedures. Performs troubleshooting and failure analysis of analog and digital circuitry to component level Provides detailed written failure description with root cause analysis to production and engineering. Follows written and verbal instructions, adheres to all company guidelines, policies and procedures. Carries out production/repair/assembly work as required within multiple departments on this site. Maintains a safe and clean work environment and follows company safety policies. Regular, consistent and punctual attendance is required. May need to work additional hours as necessary on evenings/weekends during periods of increased demand. Skills, Knowledge and Abilities List Well-organized, detail-oriented, and ability to multi-task Ability to understand and follow specific instructions and procedures Ability to work independently and prioritize duties with minimal supervision, in order to meet deadlines Skilled in the use of test equipment, hand tools, power tools and electric soldering Good reading and comprehension skills to understand regulations and instructions Ability to analyze and determine methods and procedures Good oral and written communication skills and attention to detail Proficient Microsoft Windows software applications
We are looking for an Electronics Technician to be based onsite in Melksham, reporting to the Head of Software & Electronics. This is a newly created position and provides a vital link between Design, Engineering, Production and Customer Service teams. It's a great opportunity for someone to take ownership of the role and really make it their own. Scope of the Function To deliver hands-on build, test, and troubleshooting support our specialist products and electronic systems so that prototypes and production hardware are reliable, safe, and ready for mission-critical use. The role assembles and reworks electronic assemblies, PCBAs and wiring looms, executes functional and calibration tests in line with SOPs and ESD controls, and maintains lab/production test equipment to minimise downtime and maximise product quality. It triages production and field-return issues, performs first-line fixes, and captures clear failure data and repair history, feeding actionable insights back to Engineering and Manufacturing to drive continuous improvement across new product development and sustaining activities. Key Responsibilities Assemble, test, and calibrate electronic assemblies and PCBs used in highly specialist systems. Troubleshoot and repair digital and analogue circuitry down to component level using oscilloscopes, multimeters, logic analysers, and other diagnostic tools. Perform functional and environmental testing (e.g., vibration, temperature, EMI) on electronic systems according to military and industry standards. Assist engineers with prototype builds, test fixtures, and verification activities during product development cycles. Document test procedures, calibration records, failure analysis, and repair logs using our ERP and quality management systems. Support continuous improvement efforts in electronic manufacturing processes and reliability testing. Ensure strict adherence to IPC standards, ESD practices, and our quality and safety protocol Background and Skills Essential Minimum of 2-3 years' hands-on experience in electronics assembly, test, or troubleshooting (preferably in defence, aerospace, or medical device industries). Ability to interpret technical drawings, circuit diagrams, and datasheets Understanding of microcontroller-based systems, sensor interfaces, and low-power electronics Familiarity with ESD handling and control requirements Build prototype assemblies, test fixtures, and support verification activities Ability to work effectively with engineering, production, and customer service teams Understanding of microcontroller-based systems, sensor interfaces, and low-power electronics. Strong written and verbal communication skills. Clear understanding of the importance of ESD requirements Primarily Melksham based, however able to attend our Poole site on a regular basis and infrequent customer and supplier visits in the UK or abroad. Desirable Associate degree or equivalent in Electronics Engineering Technology or a related field Support development, testing, troubleshooting, and maintenance of electronic systems Experience in regulated sectors such as defence, aerospace, or medical devices is advantageous Capture and resolve production assembly and testability issues Investigate, diagnose, and repair customer-returned products, record findings clearly Maintain calibration records, test procedures, repair logs, and other ERP/QMS documentation Contribute to continuous improvement and reliability testing processes Strong written and verbal communication skills Reliable and consistent execution of routine or repetitive technical tasks Strong knowledge of surface mount and through-hole soldering techniques (IPC-A-610 and J-STD-001 certification preferred). Strong knowledge of IPC-620 standards with hands-on experience in cable and connector assembly. Required training : The following training would be provided if not already achieved IPC-A-610 and J-STD-001 standards IPC-620 standards Benefits 36.5 hours per week over 5 days. Grade 3 Bonus of up to 5% 25 days holiday + 8 bank holidays per year Medicash medical Pension matched to 7.5% 6x salary death benefit Share incentive plan Cycle to work scheme
May 05, 2026
Full time
We are looking for an Electronics Technician to be based onsite in Melksham, reporting to the Head of Software & Electronics. This is a newly created position and provides a vital link between Design, Engineering, Production and Customer Service teams. It's a great opportunity for someone to take ownership of the role and really make it their own. Scope of the Function To deliver hands-on build, test, and troubleshooting support our specialist products and electronic systems so that prototypes and production hardware are reliable, safe, and ready for mission-critical use. The role assembles and reworks electronic assemblies, PCBAs and wiring looms, executes functional and calibration tests in line with SOPs and ESD controls, and maintains lab/production test equipment to minimise downtime and maximise product quality. It triages production and field-return issues, performs first-line fixes, and captures clear failure data and repair history, feeding actionable insights back to Engineering and Manufacturing to drive continuous improvement across new product development and sustaining activities. Key Responsibilities Assemble, test, and calibrate electronic assemblies and PCBs used in highly specialist systems. Troubleshoot and repair digital and analogue circuitry down to component level using oscilloscopes, multimeters, logic analysers, and other diagnostic tools. Perform functional and environmental testing (e.g., vibration, temperature, EMI) on electronic systems according to military and industry standards. Assist engineers with prototype builds, test fixtures, and verification activities during product development cycles. Document test procedures, calibration records, failure analysis, and repair logs using our ERP and quality management systems. Support continuous improvement efforts in electronic manufacturing processes and reliability testing. Ensure strict adherence to IPC standards, ESD practices, and our quality and safety protocol Background and Skills Essential Minimum of 2-3 years' hands-on experience in electronics assembly, test, or troubleshooting (preferably in defence, aerospace, or medical device industries). Ability to interpret technical drawings, circuit diagrams, and datasheets Understanding of microcontroller-based systems, sensor interfaces, and low-power electronics Familiarity with ESD handling and control requirements Build prototype assemblies, test fixtures, and support verification activities Ability to work effectively with engineering, production, and customer service teams Understanding of microcontroller-based systems, sensor interfaces, and low-power electronics. Strong written and verbal communication skills. Clear understanding of the importance of ESD requirements Primarily Melksham based, however able to attend our Poole site on a regular basis and infrequent customer and supplier visits in the UK or abroad. Desirable Associate degree or equivalent in Electronics Engineering Technology or a related field Support development, testing, troubleshooting, and maintenance of electronic systems Experience in regulated sectors such as defence, aerospace, or medical devices is advantageous Capture and resolve production assembly and testability issues Investigate, diagnose, and repair customer-returned products, record findings clearly Maintain calibration records, test procedures, repair logs, and other ERP/QMS documentation Contribute to continuous improvement and reliability testing processes Strong written and verbal communication skills Reliable and consistent execution of routine or repetitive technical tasks Strong knowledge of surface mount and through-hole soldering techniques (IPC-A-610 and J-STD-001 certification preferred). Strong knowledge of IPC-620 standards with hands-on experience in cable and connector assembly. Required training : The following training would be provided if not already achieved IPC-A-610 and J-STD-001 standards IPC-620 standards Benefits 36.5 hours per week over 5 days. Grade 3 Bonus of up to 5% 25 days holiday + 8 bank holidays per year Medicash medical Pension matched to 7.5% 6x salary death benefit Share incentive plan Cycle to work scheme
Job Description About the Role The Field Support Engineer provides critical technical, operational, and workshop-based support for the Digital Completion Services (DCS) product line and wider M/D Totco activities. This role ensures the correct build, configuration, testing, mobilisation, and lifecycle support of electronic instrumentation, surface systems, and downhole monitoring equipment. Responsibilities include remote monitoring, workshop preparation, onsite installation, and operational troubleshooting in both domestic (UK) and international locations. As a key technical resource within NOV Digital Services, the Field Support Engineer plays a pivotal role in maintaining service continuity and operational excellence. About the Company NOV is a global leader in the design, manufacture, and support of oilfield equipment, technologies, and services. With a legacy of innovation and a commitment to excellence, we support the world's energy industry with advanced solutions across drilling, completions, production, and digital services. NOV's M/D Totco division specialises in instrumentation and monitoring systems, ensuring our customers achieve optimal performance through high-quality data and real-time support. What We Offer Opportunity to work with cutting-edge digital completion and instrumentation systems Exposure to international field operations and technical project work Career development through technical training and cross-functional collaboration Supportive and safety-conscious working environment Access to NOV's global network and resources Key Responsibilities Digital Completion Services (DCS) Analyse operational data to identify irregularities and recommend corrective actions Provide remote monitoring, diagnostics, and troubleshooting for DCS equipment Mobilise to customer sites for installation, commissioning, and operational support Lead instrumentation checks, communication testing, and system handover procedures Deliver customer training on DCS systems and troubleshooting Build, assemble, configure, and function-test DCS equipment in the workshop Maintain accurate configuration logs, test documentation, and build records M/D Totco Instrumentation Support Provide technical support for sensors, surface acquisition units, and monitoring systems Assist with instrumentation tasks during drilling or completions operations Conduct testing, troubleshooting, and refurbishment of M/D Totco systems Support mobilisation and integration of M/D Totco equipment at customer sites Provide data interpretation and analysis when required Workshop Duties Build, configure, test, and certify DCS and M/D Totco equipment Perform fault finding, repairs, and equipment refurbishment Maintain calibration and compliance of workshop tools and equipment Prepare equipment for mobilisation, including logistics and documentation Document stock movements and support inventory accuracy Project Support & Coordination Support deployment projects, system upgrades, and integrations Assist with FAT/SAT processes and generate technical documentation Collaborate with Sales, Service, and Engineering teams to ensure project readiness Health, Safety & Compliance Comply with all NOV HSE policies and procedures Conduct risk assessments for workshop and field activities Maintain documentation for ISO compliance and QA standards Participate in safety reviews and continuous improvement initiatives General Responsibilities Produce high-quality technical documentation including schematics and field reports Contribute to equipment and process improvement initiatives Support team cross-training and knowledge sharing Perform additional duties as directed by the M/D Totco Service Manager Qualifications & Skills Degree or HNC/HND in Electronics, Instrumentation, or related discipline Proven experience with field instrumentation, monitoring systems, or control equipment Competency in system configuration, diagnostics, and hardware integration Ability to interpret technical drawings and wiring schematics Valid passport and willingness to travel internationally Interpersonal Skills (optional) Strong communication and customer interaction skills Ability to work independently and collaboratively in dynamic environments Proactive mindset with a commitment to service excellence Why Join Us Join our Global Family At NOV, we are committed to supporting your personal, financial, and professional wellbeing. Our comprehensive benefits package includes: Health & Wellbeing • Private Medical Insurance • Employee Assistance Programme (EAP) Finance & Protection • Pension Plan • Income Protection • Life Assurance • Personal Accident Coverage Flexible Benefits (via salary sacrifice options for you and your family) • Dental Insurance • Healthcare Cash Plan • Partner Life Assurance • Critical Illness Cover • Retail Vouchers • Gym Membership • Cycle to Work Scheme • Travel Insurance About Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team Corporate Our family of companies is supported by our global Corporate teams, providing expert knowledge from functions including Human Resources, Information Technology, Compliance, Finance, QHSE, Marketing and Legal centers of expertise. We are structured to provide guidance and service above all to all our business operations.
May 05, 2026
Full time
Job Description About the Role The Field Support Engineer provides critical technical, operational, and workshop-based support for the Digital Completion Services (DCS) product line and wider M/D Totco activities. This role ensures the correct build, configuration, testing, mobilisation, and lifecycle support of electronic instrumentation, surface systems, and downhole monitoring equipment. Responsibilities include remote monitoring, workshop preparation, onsite installation, and operational troubleshooting in both domestic (UK) and international locations. As a key technical resource within NOV Digital Services, the Field Support Engineer plays a pivotal role in maintaining service continuity and operational excellence. About the Company NOV is a global leader in the design, manufacture, and support of oilfield equipment, technologies, and services. With a legacy of innovation and a commitment to excellence, we support the world's energy industry with advanced solutions across drilling, completions, production, and digital services. NOV's M/D Totco division specialises in instrumentation and monitoring systems, ensuring our customers achieve optimal performance through high-quality data and real-time support. What We Offer Opportunity to work with cutting-edge digital completion and instrumentation systems Exposure to international field operations and technical project work Career development through technical training and cross-functional collaboration Supportive and safety-conscious working environment Access to NOV's global network and resources Key Responsibilities Digital Completion Services (DCS) Analyse operational data to identify irregularities and recommend corrective actions Provide remote monitoring, diagnostics, and troubleshooting for DCS equipment Mobilise to customer sites for installation, commissioning, and operational support Lead instrumentation checks, communication testing, and system handover procedures Deliver customer training on DCS systems and troubleshooting Build, assemble, configure, and function-test DCS equipment in the workshop Maintain accurate configuration logs, test documentation, and build records M/D Totco Instrumentation Support Provide technical support for sensors, surface acquisition units, and monitoring systems Assist with instrumentation tasks during drilling or completions operations Conduct testing, troubleshooting, and refurbishment of M/D Totco systems Support mobilisation and integration of M/D Totco equipment at customer sites Provide data interpretation and analysis when required Workshop Duties Build, configure, test, and certify DCS and M/D Totco equipment Perform fault finding, repairs, and equipment refurbishment Maintain calibration and compliance of workshop tools and equipment Prepare equipment for mobilisation, including logistics and documentation Document stock movements and support inventory accuracy Project Support & Coordination Support deployment projects, system upgrades, and integrations Assist with FAT/SAT processes and generate technical documentation Collaborate with Sales, Service, and Engineering teams to ensure project readiness Health, Safety & Compliance Comply with all NOV HSE policies and procedures Conduct risk assessments for workshop and field activities Maintain documentation for ISO compliance and QA standards Participate in safety reviews and continuous improvement initiatives General Responsibilities Produce high-quality technical documentation including schematics and field reports Contribute to equipment and process improvement initiatives Support team cross-training and knowledge sharing Perform additional duties as directed by the M/D Totco Service Manager Qualifications & Skills Degree or HNC/HND in Electronics, Instrumentation, or related discipline Proven experience with field instrumentation, monitoring systems, or control equipment Competency in system configuration, diagnostics, and hardware integration Ability to interpret technical drawings and wiring schematics Valid passport and willingness to travel internationally Interpersonal Skills (optional) Strong communication and customer interaction skills Ability to work independently and collaboratively in dynamic environments Proactive mindset with a commitment to service excellence Why Join Us Join our Global Family At NOV, we are committed to supporting your personal, financial, and professional wellbeing. Our comprehensive benefits package includes: Health & Wellbeing • Private Medical Insurance • Employee Assistance Programme (EAP) Finance & Protection • Pension Plan • Income Protection • Life Assurance • Personal Accident Coverage Flexible Benefits (via salary sacrifice options for you and your family) • Dental Insurance • Healthcare Cash Plan • Partner Life Assurance • Critical Illness Cover • Retail Vouchers • Gym Membership • Cycle to Work Scheme • Travel Insurance About Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team Corporate Our family of companies is supported by our global Corporate teams, providing expert knowledge from functions including Human Resources, Information Technology, Compliance, Finance, QHSE, Marketing and Legal centers of expertise. We are structured to provide guidance and service above all to all our business operations.
Test Technician - Basingstoke SALARY: £30,000 - £32,000 HOURS: Monday to Thursday, 7:30 AM 5:30 PM LOCATION: Basingstoke Join a Leading UK Electronics Manufacturer! TechPoint Group is now one of the largest UK-owned CEMs, supplying EMS and supply chain services to leading technology companies across the UK and Europe click apply for full job details
May 04, 2026
Full time
Test Technician - Basingstoke SALARY: £30,000 - £32,000 HOURS: Monday to Thursday, 7:30 AM 5:30 PM LOCATION: Basingstoke Join a Leading UK Electronics Manufacturer! TechPoint Group is now one of the largest UK-owned CEMs, supplying EMS and supply chain services to leading technology companies across the UK and Europe click apply for full job details
Morgan Parkes Recruitment Limited
Southam, Warwickshire
Job Title: Electronics Engineer Package: Competitive Duration: Permanent Hours: Full Time, 40 hours per week Shift work or flexible hours may be required depending on operational needs. Location: Southam, CV47 Overview: Reporting to the Manufacturing Engineering Supervisor, the Electronics Engineer will be required to be part of the Electrical department which will include various tasks carrying out tests on the test rig as and when required. This role needs both theoretical and practical experience working with electronic products. The Electronics Engineer will also be creating circuits from scratch and using equipment and tools such as resistors, capacitors, transistors, integrated circuit chips, connectors, breadboards and soldering irons. Duties: Create innovative electronic designs that add value to existing products or provide a solution to customer problems Computer design skills and proficiency using circuit design programs such as Eagle or Atmel Studio Theoretical and technical knowledge of electronics and electrical interfaces - such as Can open - Ethernet - Modbus Create accurate and complex circuit-board plans Communicate technical data and complex electrical designs in an easy-to-understand format Write software and make changes to suit customers requirement Knowledge of existing hardware and software products, to operate on laptops / mobile phone software Key Skills/Experience Required: Two or more years working at Technician Level or above Mathematical Skills Engineering Skills Organisational Skills Analytical Skills Creative problem-solving skills Strong fundamental Skills in Electronics Engineering Knowledge of Subsea operations and controls would be a distinct benefit Higher grades in science, maths and technical subjects at GCSE and A-level are essential Degree in related subjects such as computer engineering, physics or mechanical engineering with electronics engineering as optional subjects Recognised qualifications from the Institution of Engineering and Technology In return for your hard work, you will earn a competitive salary plus benefits. For more information or to apply please send your CV. Morgan Parkes Recruitment Ltd operate in the UK and can only process applications from candidates who are currently eligible to live and work in the UK. We operate a strict equal opportunities policy. Personal data you supply will be used for contacting you via telephone or email about our service. Your data will be kept securely and retained in line with GDPR regulations. You have the right to withdraw your consent to the use of your personal data for the specified purpose at any time.
May 04, 2026
Full time
Job Title: Electronics Engineer Package: Competitive Duration: Permanent Hours: Full Time, 40 hours per week Shift work or flexible hours may be required depending on operational needs. Location: Southam, CV47 Overview: Reporting to the Manufacturing Engineering Supervisor, the Electronics Engineer will be required to be part of the Electrical department which will include various tasks carrying out tests on the test rig as and when required. This role needs both theoretical and practical experience working with electronic products. The Electronics Engineer will also be creating circuits from scratch and using equipment and tools such as resistors, capacitors, transistors, integrated circuit chips, connectors, breadboards and soldering irons. Duties: Create innovative electronic designs that add value to existing products or provide a solution to customer problems Computer design skills and proficiency using circuit design programs such as Eagle or Atmel Studio Theoretical and technical knowledge of electronics and electrical interfaces - such as Can open - Ethernet - Modbus Create accurate and complex circuit-board plans Communicate technical data and complex electrical designs in an easy-to-understand format Write software and make changes to suit customers requirement Knowledge of existing hardware and software products, to operate on laptops / mobile phone software Key Skills/Experience Required: Two or more years working at Technician Level or above Mathematical Skills Engineering Skills Organisational Skills Analytical Skills Creative problem-solving skills Strong fundamental Skills in Electronics Engineering Knowledge of Subsea operations and controls would be a distinct benefit Higher grades in science, maths and technical subjects at GCSE and A-level are essential Degree in related subjects such as computer engineering, physics or mechanical engineering with electronics engineering as optional subjects Recognised qualifications from the Institution of Engineering and Technology In return for your hard work, you will earn a competitive salary plus benefits. For more information or to apply please send your CV. Morgan Parkes Recruitment Ltd operate in the UK and can only process applications from candidates who are currently eligible to live and work in the UK. We operate a strict equal opportunities policy. Personal data you supply will be used for contacting you via telephone or email about our service. Your data will be kept securely and retained in line with GDPR regulations. You have the right to withdraw your consent to the use of your personal data for the specified purpose at any time.
The Rewards and Benefits on Offer: Immediate start available Competitive salary and benefits package Defined training plan and career progression towards management level Collaborative and supportive work environment Free parking Dayshift Generous holiday allowance MTrec's New Opportunity: MTrec Technical are proudly representing our prestigious engineering client in their 2026 recruitment initiative with the recruitment of a permanent Electronics Technician to strengthen their team. This is an excellent opportunity for an individual who is looking to expand their knowledge and skills within an industry leading employer, with a defined progression pathway towards management. If you have experience working within the electronics industry, apply now for an immediate response! The Job You'll Do: Cover production technical operations Learn the technical aspects of the companies' products Support customers via the technical phone line and site visits. Attend and report machine breakdowns and report any and all actions carried out, as well as any further actions required. Diagnosing and repairing PCBs down to component level Carrying out mechanical maintenance fault finding and repair on electronic manufacturing machinery About You: Qualified to ONC/HNC level or above in a relevant discipline (Electronics/Electrical Engineering or similar) Mechanical fault-finding maintenance experience Previous experience as a qualified technician, with a history of PPM and breakdown response on Electronic Manufacturing equipment. SMT and electronics manufacturing machine experience. You must have the ability to diagnose and repair PCBs down to component level using a schematic drawing and use diagnostic equipment. Effective communication skills at all levels Have the ability to work within a team environment or individually
May 04, 2026
Full time
The Rewards and Benefits on Offer: Immediate start available Competitive salary and benefits package Defined training plan and career progression towards management level Collaborative and supportive work environment Free parking Dayshift Generous holiday allowance MTrec's New Opportunity: MTrec Technical are proudly representing our prestigious engineering client in their 2026 recruitment initiative with the recruitment of a permanent Electronics Technician to strengthen their team. This is an excellent opportunity for an individual who is looking to expand their knowledge and skills within an industry leading employer, with a defined progression pathway towards management. If you have experience working within the electronics industry, apply now for an immediate response! The Job You'll Do: Cover production technical operations Learn the technical aspects of the companies' products Support customers via the technical phone line and site visits. Attend and report machine breakdowns and report any and all actions carried out, as well as any further actions required. Diagnosing and repairing PCBs down to component level Carrying out mechanical maintenance fault finding and repair on electronic manufacturing machinery About You: Qualified to ONC/HNC level or above in a relevant discipline (Electronics/Electrical Engineering or similar) Mechanical fault-finding maintenance experience Previous experience as a qualified technician, with a history of PPM and breakdown response on Electronic Manufacturing equipment. SMT and electronics manufacturing machine experience. You must have the ability to diagnose and repair PCBs down to component level using a schematic drawing and use diagnostic equipment. Effective communication skills at all levels Have the ability to work within a team environment or individually
Technician required with electrical assembly experience and IPC certification. Ker skills Soldering, crimping and general wiring skills. Ability to apply basic arithmetic operations, compute ratio and rate, percentage, fractions and ratios, and calculate weights and measures, including Imperial to Metric conversions. Electronics precision engineering workmanship practices. Role will be to perform all Electronic Assembler duties under zero supervision. Following routings and records test measurements on PC based systems.
May 04, 2026
Full time
Technician required with electrical assembly experience and IPC certification. Ker skills Soldering, crimping and general wiring skills. Ability to apply basic arithmetic operations, compute ratio and rate, percentage, fractions and ratios, and calculate weights and measures, including Imperial to Metric conversions. Electronics precision engineering workmanship practices. Role will be to perform all Electronic Assembler duties under zero supervision. Following routings and records test measurements on PC based systems.
My client, a prominent technology engineering firm, is seeking to recruit a Production Technician to join their team at their headquarters in Hampshire. As a Production Technician, based in Hampshire, you will be working through day-to-day tasks as established by the Production Supervisor of the working area, and in accordance with the production plan, on the wiring and assembly of production jobs. Responsibilities for the Production Technician : Working through day to day tasks in accordance with the production plan, on the wiring and assembly of production jobs. Adhering to Quality standards, following set procedures & work flows at all times Inspecting work in accordance with Inspection guidelines Soldering, as required. Working towards IPC-620 standard (training will be provided) Conducting procedural tests on production products The ideal Production Technician candidate, based in Hampshire will have previous experience within a production/engineering environment, ideally with knowledge of electronics/soldering. You will have strong attention to detail, communication and organisation skills, with an understanding of technical drawings desirable. You will be self-motivated, with the ability to work on your own initiative or as part of a team. This Production Technician job, based in Hampshire is a fantastic opportunity to learn and develop new skills and increase your personal career development as part of a leading technology/engineering company so if you are interested, please apply today by emailing a copy of your up-to-date CV to (url removed) or phone (phone number removed).
May 04, 2026
Full time
My client, a prominent technology engineering firm, is seeking to recruit a Production Technician to join their team at their headquarters in Hampshire. As a Production Technician, based in Hampshire, you will be working through day-to-day tasks as established by the Production Supervisor of the working area, and in accordance with the production plan, on the wiring and assembly of production jobs. Responsibilities for the Production Technician : Working through day to day tasks in accordance with the production plan, on the wiring and assembly of production jobs. Adhering to Quality standards, following set procedures & work flows at all times Inspecting work in accordance with Inspection guidelines Soldering, as required. Working towards IPC-620 standard (training will be provided) Conducting procedural tests on production products The ideal Production Technician candidate, based in Hampshire will have previous experience within a production/engineering environment, ideally with knowledge of electronics/soldering. You will have strong attention to detail, communication and organisation skills, with an understanding of technical drawings desirable. You will be self-motivated, with the ability to work on your own initiative or as part of a team. This Production Technician job, based in Hampshire is a fantastic opportunity to learn and develop new skills and increase your personal career development as part of a leading technology/engineering company so if you are interested, please apply today by emailing a copy of your up-to-date CV to (url removed) or phone (phone number removed).
Travail Employment Group
Bishops Cleeve, Gloucestershire
Assembly Technician Location: Bishop's Cleeve Hours: 7:00am - 4:00pm 18 - 20 Per Hour Temporary About the Opportunity We're working with an innovative and growing engineering business based in Bishop's Cleeve, recognised for designing and manufacturing high-quality technical equipment used in demanding environments worldwide. With a strong reputation for precision, reliability, and continuous improvement, this organisation offers a fantastic opportunity for an Assembly Technician to join a close-knit team where your contribution is genuinely valued. The Role This is a hands-on, detail-focused Assembly Technician position where you will be responsible for assembling, wiring and building a range of advanced products. You will play a key role in ensuring all equipment is produced to the highest standards of quality and reliability. A central part of this role is soldering to IPC standards . Whether you already have experience or are looking to further develop your skills, you will be supported to work to recognised IPC soldering standards, making this an excellent opportunity to build specialist expertise. Key responsibilities include: Building and assembling products across various stages of production Carrying out precise soldering in line with IPC standards Identifying and working with electronic components such as resistors and capacitors Interpreting electrical wiring diagrams and mechanical drawings accurately Using a range of hand tools with confidence and precision Maintaining clear and accurate build records and documentation Supporting continuous improvement across production processes Following strict health and safety procedures at all times Working within an Electrostatic Protected Area environment What We're Looking For Previous experience in a hands-on assembly or manufacturing role Strong attention to detail, particularly when working to IPC soldering standards Ability to manage your own workload and prioritise effectively Basic PC literacy for tracking and recording builds A positive, team-oriented approach Confidence working with hand tools in a technical environment Full UK driving licence Experience and Qualifications GCSEs or equivalent Experience in electronics or assembly is beneficial IPC soldering experience or certification is highly advantageous , although training will be provided Why Apply? Competitive hourly rate of 18 - 20 Opportunity to secure a permanent position Early finish every day, supporting a strong work-life balance Opportunity to develop specialist skills in IPC-standard soldering Supportive and collaborative team environment Be part of a growing business where your contribution is visible and valued If you are an Assembly Technician looking to develop your career in a role that places real emphasis on quality, precision and IPC-standard soldering , this is an excellent opportunity to take the next step. Apply today or get in touch to find out more. Travail Employment Group Ltd is acting as an Employment Business in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion.
May 04, 2026
Seasonal
Assembly Technician Location: Bishop's Cleeve Hours: 7:00am - 4:00pm 18 - 20 Per Hour Temporary About the Opportunity We're working with an innovative and growing engineering business based in Bishop's Cleeve, recognised for designing and manufacturing high-quality technical equipment used in demanding environments worldwide. With a strong reputation for precision, reliability, and continuous improvement, this organisation offers a fantastic opportunity for an Assembly Technician to join a close-knit team where your contribution is genuinely valued. The Role This is a hands-on, detail-focused Assembly Technician position where you will be responsible for assembling, wiring and building a range of advanced products. You will play a key role in ensuring all equipment is produced to the highest standards of quality and reliability. A central part of this role is soldering to IPC standards . Whether you already have experience or are looking to further develop your skills, you will be supported to work to recognised IPC soldering standards, making this an excellent opportunity to build specialist expertise. Key responsibilities include: Building and assembling products across various stages of production Carrying out precise soldering in line with IPC standards Identifying and working with electronic components such as resistors and capacitors Interpreting electrical wiring diagrams and mechanical drawings accurately Using a range of hand tools with confidence and precision Maintaining clear and accurate build records and documentation Supporting continuous improvement across production processes Following strict health and safety procedures at all times Working within an Electrostatic Protected Area environment What We're Looking For Previous experience in a hands-on assembly or manufacturing role Strong attention to detail, particularly when working to IPC soldering standards Ability to manage your own workload and prioritise effectively Basic PC literacy for tracking and recording builds A positive, team-oriented approach Confidence working with hand tools in a technical environment Full UK driving licence Experience and Qualifications GCSEs or equivalent Experience in electronics or assembly is beneficial IPC soldering experience or certification is highly advantageous , although training will be provided Why Apply? Competitive hourly rate of 18 - 20 Opportunity to secure a permanent position Early finish every day, supporting a strong work-life balance Opportunity to develop specialist skills in IPC-standard soldering Supportive and collaborative team environment Be part of a growing business where your contribution is visible and valued If you are an Assembly Technician looking to develop your career in a role that places real emphasis on quality, precision and IPC-standard soldering , this is an excellent opportunity to take the next step. Apply today or get in touch to find out more. Travail Employment Group Ltd is acting as an Employment Business in relation to this vacancy. Thanks for your application. Due to the high level of responses we are currently receiving, whilst we endeavour to contact everyone, sometimes we are unable to. If you have not heard from us within 10 working days of making your application, please assume that you have been unsuccessful on this occasion.
Calibration Technician - United Kingdom Location: Reading Employment Type: Contract (1-2 years initially, with strong potential for extension or transition to permanent based on business growth and performance) Work Type: Onsite Reporting Line: Depot Manager (based in Europe) Role Overview A Calibration Technician is required to support the setup and day-to-day running of a newly established UK-based Calibration Laboratory. This position offers significant autonomy, responsibility, and visibility, making it well suited to someone who enjoys building processes from the ground up and taking ownership of operational delivery. The role begins as a contract position, with the potential to extend or convert to permanent as service demand grows. During early stages, certain system and administrative activities may be supported by international service teams until local volumes increase. Key Responsibilities Calibration & Technical Duties Perform calibration, verification, and functional testing of electronic test and measurement instruments in line with approved procedures and quality standards. Ensure full compliance with ISO/IEC 17025, internal quality systems, and traceability requirements. Prepare and maintain accurate calibration records, certificates, and associated documentation. Conduct basic troubleshooting and escalate technical issues when necessary. Lab Operations & Logistics Oversee daily laboratory operations, including receiving customer equipment and managing shipments. Coordinate packing, dispatch, and return of calibrated instruments. Collaborate with logistics partners to support smooth inbound and outbound equipment movements. Maintain laboratory equipment, calibration standards, inventory, and consumables. Cross-Functional Coordination Serve as the main point of contact for coordination with European depot teams and customer service functions. Provide operational insights on workload trends, turnaround time performance, and future capacity requirements. Customer Interaction Respond to basic customer queries related to calibration status, timelines, and documentation. Support a positive customer experience and maintain high service standards. What Makes This Role Unique Opportunity to contribute to the setup, development, and growth of a new UK calibration facility. High-ownership position with broad exposure to a wide range of electronic test and measurement equipment. Close collaboration with experienced international teams. Strong potential for the role to expand as business volumes increase. Ideal Candidate Profile This position is well suited to individuals who: Have at least 5 years' experience in the calibration industry, ideally with electrical or electronic test and measurement equipment. Are confident initially operating a "one-person setup" until additional hires are made. Qualifications & Skills UK-equivalent technical qualifications such as: HNC / HND in Electronics or Electrical Engineering BTEC Level 4/5 in a related engineering discipline Bachelor's degree in Electronics, Electrical Engineering, or a related field Experience in calibration, testing, servicing, or repair of electronic instruments. Experience with oscilloscopes, DMMs, power supplies, SMUs, or RF equipment is highly desirable. Working knowledge of ISO/IEC 17025 and calibration quality systems (preferred). Please click apply now!
May 04, 2026
Full time
Calibration Technician - United Kingdom Location: Reading Employment Type: Contract (1-2 years initially, with strong potential for extension or transition to permanent based on business growth and performance) Work Type: Onsite Reporting Line: Depot Manager (based in Europe) Role Overview A Calibration Technician is required to support the setup and day-to-day running of a newly established UK-based Calibration Laboratory. This position offers significant autonomy, responsibility, and visibility, making it well suited to someone who enjoys building processes from the ground up and taking ownership of operational delivery. The role begins as a contract position, with the potential to extend or convert to permanent as service demand grows. During early stages, certain system and administrative activities may be supported by international service teams until local volumes increase. Key Responsibilities Calibration & Technical Duties Perform calibration, verification, and functional testing of electronic test and measurement instruments in line with approved procedures and quality standards. Ensure full compliance with ISO/IEC 17025, internal quality systems, and traceability requirements. Prepare and maintain accurate calibration records, certificates, and associated documentation. Conduct basic troubleshooting and escalate technical issues when necessary. Lab Operations & Logistics Oversee daily laboratory operations, including receiving customer equipment and managing shipments. Coordinate packing, dispatch, and return of calibrated instruments. Collaborate with logistics partners to support smooth inbound and outbound equipment movements. Maintain laboratory equipment, calibration standards, inventory, and consumables. Cross-Functional Coordination Serve as the main point of contact for coordination with European depot teams and customer service functions. Provide operational insights on workload trends, turnaround time performance, and future capacity requirements. Customer Interaction Respond to basic customer queries related to calibration status, timelines, and documentation. Support a positive customer experience and maintain high service standards. What Makes This Role Unique Opportunity to contribute to the setup, development, and growth of a new UK calibration facility. High-ownership position with broad exposure to a wide range of electronic test and measurement equipment. Close collaboration with experienced international teams. Strong potential for the role to expand as business volumes increase. Ideal Candidate Profile This position is well suited to individuals who: Have at least 5 years' experience in the calibration industry, ideally with electrical or electronic test and measurement equipment. Are confident initially operating a "one-person setup" until additional hires are made. Qualifications & Skills UK-equivalent technical qualifications such as: HNC / HND in Electronics or Electrical Engineering BTEC Level 4/5 in a related engineering discipline Bachelor's degree in Electronics, Electrical Engineering, or a related field Experience in calibration, testing, servicing, or repair of electronic instruments. Experience with oscilloscopes, DMMs, power supplies, SMUs, or RF equipment is highly desirable. Working knowledge of ISO/IEC 17025 and calibration quality systems (preferred). Please click apply now!
Your new company A global leader in industrial technology and automation, this organisation designs and manufactures advanced drive and control solutions used worldwide. Based at an award-winning manufacturing site in Congleton, the business combines engineering excellence with a strong focus on innovation, digitisation, and continuous improvement. You'll be part of a collaborative, forward-thinking environment where engineering best practice is shared globally. Your new role As a Test Engineer within a high-performance manufacturing environment, you'll take ownership of delivering robust, scalable test solutions across a variable speed drives portfolio. The role blends hands-on engineering with continuous improvement, supporting both existing production and new product introductions.You'll design, deploy, and maintain PCB- and product-level test systems, ensuring reliability, efficiency, and compliance. Working closely with manufacturing, quality, and global engineering teams, you'll analyse machine data, troubleshoot issues, and drive capability improvements. You'll also play a key role in mentoring technicians and colleagues on test engineering principles.This role suits engineers from electronics, test, automation, manufacturing, or electrical engineering backgrounds who enjoy problem-solving in a fast-paced, technology-led environment. What you'll need to succeed Essential: Electrical and Electronic Engineering Qualification, e.g NVQ Level 3, HNC, Degree (or equivalent experience) Hands-on experience with automated and/or manual test systems in a manufacturing environment Strong problem-solving capability, including the use of statistical or data-driven methods Ability to communicate complex technical topics clearly to both technical and non-technical audiences Desirable: Exposure to programming (e.g. C/C++, graphical or low-code environments) Experience with ICT or flying-probe test platforms (e.g. Keysight, Teradyne, Takaya, SPEA) Familiarity with PLC-based control systems (TIA Portal experience advantageous) Knowledge of PUWER and practical risk assessment processes What you'll get in return Salary up to £55,000 Annual performance-related bonus Flexible working hours to support work-life balance Generous pension scheme with employer contributions of up to 10% 26 days' annual leave plus bank holidays Option to buy or sell up to 5 additional days of holiday Long-term career development within a global engineering organisation What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
May 04, 2026
Full time
Your new company A global leader in industrial technology and automation, this organisation designs and manufactures advanced drive and control solutions used worldwide. Based at an award-winning manufacturing site in Congleton, the business combines engineering excellence with a strong focus on innovation, digitisation, and continuous improvement. You'll be part of a collaborative, forward-thinking environment where engineering best practice is shared globally. Your new role As a Test Engineer within a high-performance manufacturing environment, you'll take ownership of delivering robust, scalable test solutions across a variable speed drives portfolio. The role blends hands-on engineering with continuous improvement, supporting both existing production and new product introductions.You'll design, deploy, and maintain PCB- and product-level test systems, ensuring reliability, efficiency, and compliance. Working closely with manufacturing, quality, and global engineering teams, you'll analyse machine data, troubleshoot issues, and drive capability improvements. You'll also play a key role in mentoring technicians and colleagues on test engineering principles.This role suits engineers from electronics, test, automation, manufacturing, or electrical engineering backgrounds who enjoy problem-solving in a fast-paced, technology-led environment. What you'll need to succeed Essential: Electrical and Electronic Engineering Qualification, e.g NVQ Level 3, HNC, Degree (or equivalent experience) Hands-on experience with automated and/or manual test systems in a manufacturing environment Strong problem-solving capability, including the use of statistical or data-driven methods Ability to communicate complex technical topics clearly to both technical and non-technical audiences Desirable: Exposure to programming (e.g. C/C++, graphical or low-code environments) Experience with ICT or flying-probe test platforms (e.g. Keysight, Teradyne, Takaya, SPEA) Familiarity with PLC-based control systems (TIA Portal experience advantageous) Knowledge of PUWER and practical risk assessment processes What you'll get in return Salary up to £55,000 Annual performance-related bonus Flexible working hours to support work-life balance Generous pension scheme with employer contributions of up to 10% 26 days' annual leave plus bank holidays Option to buy or sell up to 5 additional days of holiday Long-term career development within a global engineering organisation What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: Following planned expansion, Saab is looking to recruit a customer-focused field support technician responsible for the service, installation, repair, and general maintenance of the Giraffe 1X multi-mission radar, as well as other radars in Saab's portfolio. This is an important role, and will require building relationships with the in-country operators, as well as with Saab Engineering Teams. In this position, you will work with a range of technologies including radar systems, software loading/programming, high-power components (AC and DC), electronics, hydraulics, cooling systems, and interfaces with both Saab and other Command and Control systems. The ability and willingness to travel, including internationally and to areas of very high risk will be essential for this role. The successful candidate will have the potential to progress within the business; they will also benefit from continuous training across the different sectors of the business and sensors. Key Responsibilities: Support customers on-site, both domestically and internationally in field and operational environments to enable initial radar system fielding; this includes conducting planned and preventative maintenance. Additional tasks will include manning customer support desks, training end users, and assisting with production at the original equipment manufacturer (OEM). Support to trials, exercises, deployments globally in support of military operations, and other company market growth initiatives. System integration and verification, and support to configuration management. Reporting and administering the running of projects and training events as required Qualifications and Experience: Essential: The ability to understand complex systems of systems - ideally this would be extensive knowledge of either a radar, electronic warfare, command and control, or sophisticated military electronic systems. A willingness to deploy at short notice to areas of very high risk. Ability to meet the physical requirements of, and pass the medical examinations associated with, Deployment Ready Training. Experience in a technical customer-facing environment demonstrating fault-finding and problem-solving abilities in a high-pressure environment Full UK driving licence Computer literate Able to obtain UK Security Clearance up to SC UK or Swedish citizenship Desirable: Qualified to a minimum of ONC/HNC level or equivalent in a technical area Multi-skilled electrical bias Previous military experience is highly desired to support the initial fielding of the systems with customers. Teaching/ instructional experience, including in practical scenarios, on military systems. Be a motivated and critical-thinking individual Be capable of working independently and managing their own workload Have excellent interpersonal skills Be comfortable in a complex customer-facing environment Thrive in big groups and maintain a large professional network Be perceptive, flexible, and act with integrity, always keeping Saab's best interests in mind Have a genuine interest in technology and the ability to adapt styles to suit a varied audience As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
May 04, 2026
Full time
Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. What you will be part of Saab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: Following planned expansion, Saab is looking to recruit a customer-focused field support technician responsible for the service, installation, repair, and general maintenance of the Giraffe 1X multi-mission radar, as well as other radars in Saab's portfolio. This is an important role, and will require building relationships with the in-country operators, as well as with Saab Engineering Teams. In this position, you will work with a range of technologies including radar systems, software loading/programming, high-power components (AC and DC), electronics, hydraulics, cooling systems, and interfaces with both Saab and other Command and Control systems. The ability and willingness to travel, including internationally and to areas of very high risk will be essential for this role. The successful candidate will have the potential to progress within the business; they will also benefit from continuous training across the different sectors of the business and sensors. Key Responsibilities: Support customers on-site, both domestically and internationally in field and operational environments to enable initial radar system fielding; this includes conducting planned and preventative maintenance. Additional tasks will include manning customer support desks, training end users, and assisting with production at the original equipment manufacturer (OEM). Support to trials, exercises, deployments globally in support of military operations, and other company market growth initiatives. System integration and verification, and support to configuration management. Reporting and administering the running of projects and training events as required Qualifications and Experience: Essential: The ability to understand complex systems of systems - ideally this would be extensive knowledge of either a radar, electronic warfare, command and control, or sophisticated military electronic systems. A willingness to deploy at short notice to areas of very high risk. Ability to meet the physical requirements of, and pass the medical examinations associated with, Deployment Ready Training. Experience in a technical customer-facing environment demonstrating fault-finding and problem-solving abilities in a high-pressure environment Full UK driving licence Computer literate Able to obtain UK Security Clearance up to SC UK or Swedish citizenship Desirable: Qualified to a minimum of ONC/HNC level or equivalent in a technical area Multi-skilled electrical bias Previous military experience is highly desired to support the initial fielding of the systems with customers. Teaching/ instructional experience, including in practical scenarios, on military systems. Be a motivated and critical-thinking individual Be capable of working independently and managing their own workload Have excellent interpersonal skills Be comfortable in a complex customer-facing environment Thrive in big groups and maintain a large professional network Be perceptive, flexible, and act with integrity, always keeping Saab's best interests in mind Have a genuine interest in technology and the ability to adapt styles to suit a varied audience As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.
Manufacturing Technician required to perform technical duties in electronic, mechanical or systems production by completing tests, measurements, operations and process controls. Requirements Ability to read blueprints, identify components, wire stripping and crimping, harness repair and termination hand tools for electronics, hydraulics and mechanical assemblies, Subsea Technology or Manufacturing Centre experience. Production Workflow knowledge. Responsibilities Production Test and Assembly Use job packets, routings, work orders, wire lists, quality and bills of material. Maintain production tools and equipment. Perform troubleshooting to diagnose product, process or program defects and repair them.
May 04, 2026
Seasonal
Manufacturing Technician required to perform technical duties in electronic, mechanical or systems production by completing tests, measurements, operations and process controls. Requirements Ability to read blueprints, identify components, wire stripping and crimping, harness repair and termination hand tools for electronics, hydraulics and mechanical assemblies, Subsea Technology or Manufacturing Centre experience. Production Workflow knowledge. Responsibilities Production Test and Assembly Use job packets, routings, work orders, wire lists, quality and bills of material. Maintain production tools and equipment. Perform troubleshooting to diagnose product, process or program defects and repair them.
If you enjoy hands-on electronics work and take pride in accuracy, consistency and quality, this role offers the chance to work on advanced RF technology without needing to be a specialist design engineer. This is not a theoretical engineering role. It is about what you can do with your hands. You will join a specialist manufacturing environment where your work directly impacts the performance of high-precision electronic systems used in critical applications. Why this role stands out You will sit at the centre of engineering, production and test, giving you real exposure across the full manufacturing lifecycle You will work with advanced RF and electronic systems, building valuable technical capability in a growing sector You will develop highly transferable skills in calibration, alignment and precision assembly Shift options allow you to significantly increase your earnings What you will be doing Aligning, tuning and calibrating electronic and RF components to tight specifications Carrying out test and verification activities using specialist equipment Supporting production by ensuring consistent, repeatable quality standards Working at PCB and component level to identify and resolve issues Recording results and maintaining accurate documentation Supporting continuous improvement of alignment and test processes What we are looking for Essential experience Hands-on electronics experience within a manufacturing, test or production environment Experience working with electronic assemblies or PCB-level work Strong manual dexterity and the ability to carry out precise, repetitive tasks High attention to detail and ability to work to tight specifications Useful but not essential Exposure to RF, microwave or similar technologies Experience using test equipment such as spectrum analysers, network analysers or signal generators Background in aerospace, defence, telecoms, instrumentation or electronics manufacturing Working pattern and salary Basic salary of 30,000 Shift options available 2-shift pattern with approximately 12.5% uplift Continental shift pattern with approximately 30% uplift The continental shift offers the strongest earning potential and is likely to attract candidates seeking higher take-home pay Security and eligibility BPSS clearance required You must have full right to work in the UK What this role really suits This role is ideal for a hands-on Electronics Technician, Test Technician or Calibration Technician who enjoys precision work and wants to build capability in a high-spec manufacturing environment It is not suited to purely theoretical engineers or senior RF design specialists Apply now If you are looking for a role where your practical skills make a real difference, apply today or contact us for a confidential discussion
May 04, 2026
Full time
If you enjoy hands-on electronics work and take pride in accuracy, consistency and quality, this role offers the chance to work on advanced RF technology without needing to be a specialist design engineer. This is not a theoretical engineering role. It is about what you can do with your hands. You will join a specialist manufacturing environment where your work directly impacts the performance of high-precision electronic systems used in critical applications. Why this role stands out You will sit at the centre of engineering, production and test, giving you real exposure across the full manufacturing lifecycle You will work with advanced RF and electronic systems, building valuable technical capability in a growing sector You will develop highly transferable skills in calibration, alignment and precision assembly Shift options allow you to significantly increase your earnings What you will be doing Aligning, tuning and calibrating electronic and RF components to tight specifications Carrying out test and verification activities using specialist equipment Supporting production by ensuring consistent, repeatable quality standards Working at PCB and component level to identify and resolve issues Recording results and maintaining accurate documentation Supporting continuous improvement of alignment and test processes What we are looking for Essential experience Hands-on electronics experience within a manufacturing, test or production environment Experience working with electronic assemblies or PCB-level work Strong manual dexterity and the ability to carry out precise, repetitive tasks High attention to detail and ability to work to tight specifications Useful but not essential Exposure to RF, microwave or similar technologies Experience using test equipment such as spectrum analysers, network analysers or signal generators Background in aerospace, defence, telecoms, instrumentation or electronics manufacturing Working pattern and salary Basic salary of 30,000 Shift options available 2-shift pattern with approximately 12.5% uplift Continental shift pattern with approximately 30% uplift The continental shift offers the strongest earning potential and is likely to attract candidates seeking higher take-home pay Security and eligibility BPSS clearance required You must have full right to work in the UK What this role really suits This role is ideal for a hands-on Electronics Technician, Test Technician or Calibration Technician who enjoys precision work and wants to build capability in a high-spec manufacturing environment It is not suited to purely theoretical engineers or senior RF design specialists Apply now If you are looking for a role where your practical skills make a real difference, apply today or contact us for a confidential discussion
Production Technician (Electronics) £35,000 - £40,000 + Training + Progression + Great Benefits Heanor (Commutable from: Ilkeston, Nottingham, Derby, Mansfield, Ripley, Matlock, Beeston, Ashbourne, Newark) Do you have Electronics or R&D experience looking to work for a globally-renowned manufacturer willing to provide continued training and development to become a technical expert in a specialist field?On offer is a great opportunity to work in a modern and purpose built facility on innovative equipment with clear progression opportunities and good work life balance.This business trade as experts within the Manufacture of high-technically equipment within the Automotive sector. They have a global presence and are growing at an incredible rate.In this role, you will be involved in the Testing, Research and Development of Electronic equipment. This is a Monday - Friday days role from their head office.This role would suit an Electronics Engineer or Technician looking for a great career opportunity with a close-knit and specialist team within a highly varied role. The Role: Testing, R&D, Building and Assembly. Exposure to both Hardware and Software. Days Based Monday-Friday (7am - 3pm). The Person: Electronic Technician, Engineer. Manufacturing, Production background Live commutable to Derbyshire. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
May 03, 2026
Full time
Production Technician (Electronics) £35,000 - £40,000 + Training + Progression + Great Benefits Heanor (Commutable from: Ilkeston, Nottingham, Derby, Mansfield, Ripley, Matlock, Beeston, Ashbourne, Newark) Do you have Electronics or R&D experience looking to work for a globally-renowned manufacturer willing to provide continued training and development to become a technical expert in a specialist field?On offer is a great opportunity to work in a modern and purpose built facility on innovative equipment with clear progression opportunities and good work life balance.This business trade as experts within the Manufacture of high-technically equipment within the Automotive sector. They have a global presence and are growing at an incredible rate.In this role, you will be involved in the Testing, Research and Development of Electronic equipment. This is a Monday - Friday days role from their head office.This role would suit an Electronics Engineer or Technician looking for a great career opportunity with a close-knit and specialist team within a highly varied role. The Role: Testing, R&D, Building and Assembly. Exposure to both Hardware and Software. Days Based Monday-Friday (7am - 3pm). The Person: Electronic Technician, Engineer. Manufacturing, Production background Live commutable to Derbyshire. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
An exciting opportunity has arisen for an Electronics Technician to join our rapidly growing Calibration & Maintenance team in Stevenage. Salary: Circa £42,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. The opportunity: We are seeking an Electronics Technician to join our Calibration & Maintenance Team, to conduct planned calibration of various Special to Type Test Equipment (STTE). The work is extremely varied, interesting and challenging. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. You will be working within an experienced team of Calibration & Maintenance Engineers supporting complex test platforms in the manufacture and test of complex missile systems. You will be trained to calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave. Annual reviews assess and plan any future development opportunities and needs to widen your overall engineering knowledge. Teamwork and knowledge sharing is an essential part of the team ethos as is the understanding of workload and throughput achievements. Your daily working routine will include: Working in a multi discipline team to support the Operations team. Ensure that both factory and proprietary test and measuring equipment is maintained in line with current procedures. Carry out repair tasks in accordance with departmental processes and procedures. Generating clear and comprehensive maintenance records for traceability purposes. What we're looking for from you: Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) Experience and knowledge in the calibration of test equipment and some knowledge in maintenance of test systems to component level would be preferable. Able to utilise instructions, handbooks, drawings or specifications to provide technical advice/guidance. Able to use this information to conduct appropriate measurements and repairs down to component level would be preferable. Good understanding of calibration principles and processes. Able to deal with multiple issues, tasks and priorities concurrently. Strong analytical and problem-solving skills. Good attitude to quality and safety. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
May 03, 2026
Full time
An exciting opportunity has arisen for an Electronics Technician to join our rapidly growing Calibration & Maintenance team in Stevenage. Salary: Circa £42,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more. The opportunity: We are seeking an Electronics Technician to join our Calibration & Maintenance Team, to conduct planned calibration of various Special to Type Test Equipment (STTE). The work is extremely varied, interesting and challenging. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. You will be working within an experienced team of Calibration & Maintenance Engineers supporting complex test platforms in the manufacture and test of complex missile systems. You will be trained to calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave. Annual reviews assess and plan any future development opportunities and needs to widen your overall engineering knowledge. Teamwork and knowledge sharing is an essential part of the team ethos as is the understanding of workload and throughput achievements. Your daily working routine will include: Working in a multi discipline team to support the Operations team. Ensure that both factory and proprietary test and measuring equipment is maintained in line with current procedures. Carry out repair tasks in accordance with departmental processes and procedures. Generating clear and comprehensive maintenance records for traceability purposes. What we're looking for from you: Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) Experience and knowledge in the calibration of test equipment and some knowledge in maintenance of test systems to component level would be preferable. Able to utilise instructions, handbooks, drawings or specifications to provide technical advice/guidance. Able to use this information to conduct appropriate measurements and repairs down to component level would be preferable. Good understanding of calibration principles and processes. Able to deal with multiple issues, tasks and priorities concurrently. Strong analytical and problem-solving skills. Good attitude to quality and safety. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
An exciting opportunity has arisen for an Electronics Engineering Team Lead to work within the growing Calibration & Maintenance department. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: This opportunity is for an Electronics Engineering Team Lead to join the Calibration & Maintenance department at Stevenage, which is part of the Manufacturing functional organisation. The Calibration & Maintenance Engineering Team Lead will be responsible for leading a growing team of engineers and technicians, calibrating and repairing commercial off the shelf (COTS) test and measurement equipment within our laboratories. This includes manual and automated calibrations using Fluke METCAL software. Knowledge of calibration requirements, calibration controls & equipment capabilities is critical, as well as working closely with other stakeholders within and outside the calibration department. What we're looking for from you Minimum HNC/HND qualification or equivalent in a relevant electronics engineering subject. Proven people manager experience. Sound technical knowledge of test and measurement equipment, both theory and practical. A strong understanding of calibration principles. Demonstrated experience leading audits and managing compliance to relevant standards. Experience working with external stakeholders and managing workload. A working knowledge of SAP and JIRA would be an advantage Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
May 03, 2026
Full time
An exciting opportunity has arisen for an Electronics Engineering Team Lead to work within the growing Calibration & Maintenance department. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more The opportunity: This opportunity is for an Electronics Engineering Team Lead to join the Calibration & Maintenance department at Stevenage, which is part of the Manufacturing functional organisation. The Calibration & Maintenance Engineering Team Lead will be responsible for leading a growing team of engineers and technicians, calibrating and repairing commercial off the shelf (COTS) test and measurement equipment within our laboratories. This includes manual and automated calibrations using Fluke METCAL software. Knowledge of calibration requirements, calibration controls & equipment capabilities is critical, as well as working closely with other stakeholders within and outside the calibration department. What we're looking for from you Minimum HNC/HND qualification or equivalent in a relevant electronics engineering subject. Proven people manager experience. Sound technical knowledge of test and measurement equipment, both theory and practical. A strong understanding of calibration principles. Demonstrated experience leading audits and managing compliance to relevant standards. Experience working with external stakeholders and managing workload. A working knowledge of SAP and JIRA would be an advantage Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.
Test Technician Basingstoke Salary: £28,000£32,000 Bonus Hours: Monday to Thursday, 7:30 AM 5:30 PM Location: Basingstoke Join a Leading UK Electronics Manufacturer We are seeking a detail-oriented and technically skilled Test Technician to join our team in a modern, clean manufacturing environment click apply for full job details
May 02, 2026
Full time
Test Technician Basingstoke Salary: £28,000£32,000 Bonus Hours: Monday to Thursday, 7:30 AM 5:30 PM Location: Basingstoke Join a Leading UK Electronics Manufacturer We are seeking a detail-oriented and technically skilled Test Technician to join our team in a modern, clean manufacturing environment click apply for full job details
Ernest Gordon Recruitment Limited
Wakefield, Yorkshire
Graduate Test Engineer (Electronics) £28,000 - £32,000 (Overtime OTE 34-36K) + Training + Progression + 25 Days Holiday + Benefits Wakefield, Yorkshire Are you an Electronics Graduate looking to work for an internationally renown business who are global leaders in product compliance that can offer continuous career development to enable you to become a technical expert? On offer is the chance to work within a global business who make a real impact across all walks of life, supplying vital test and compliance services across many sectors. In this role you will work cross-functionally in an electronics lab, working to test electronic components. You'll be fully trained on the entire process, with the aim of taking ownership and working autonomously as a technical expert. The company pride themselves on their high retention and progression opportunities throughout the wider business. This company are a global leader in testing and certification. With labs across the globe, they pave the way for developing new techniques to keep up with the ever-changing landscape of scientific advancement. This role would suit an Electronics Graduate with a keen eye for detail, looking for a role that offers full training and structured career development that will enable you to become a technical expert. The Role: Setting up test rigs within an electronics laboratory Testing electronic components for safety compliance Writing reports and documentation Full training and structured development opportunities Monday - Thursday, 8.30am - 4.30pm, 4pm finish on Fridays Optional overtime available at 1.5x during the week and 2x on weekends The Person: Graduate Electronics Engineer or similar Commutable to Wakefield, or able to relocate Job Reference: BBBH 24653a Keyword: Engineer, Grad, Junior, Engineering, Testing, Electronics, EMC, Test, CE, Compliance, Certification, Training, Development, Junior, Technician, Electrical, Castleford, Wakefield, Leeds, Yorkshire, RF, Graduate If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
May 01, 2026
Full time
Graduate Test Engineer (Electronics) £28,000 - £32,000 (Overtime OTE 34-36K) + Training + Progression + 25 Days Holiday + Benefits Wakefield, Yorkshire Are you an Electronics Graduate looking to work for an internationally renown business who are global leaders in product compliance that can offer continuous career development to enable you to become a technical expert? On offer is the chance to work within a global business who make a real impact across all walks of life, supplying vital test and compliance services across many sectors. In this role you will work cross-functionally in an electronics lab, working to test electronic components. You'll be fully trained on the entire process, with the aim of taking ownership and working autonomously as a technical expert. The company pride themselves on their high retention and progression opportunities throughout the wider business. This company are a global leader in testing and certification. With labs across the globe, they pave the way for developing new techniques to keep up with the ever-changing landscape of scientific advancement. This role would suit an Electronics Graduate with a keen eye for detail, looking for a role that offers full training and structured career development that will enable you to become a technical expert. The Role: Setting up test rigs within an electronics laboratory Testing electronic components for safety compliance Writing reports and documentation Full training and structured development opportunities Monday - Thursday, 8.30am - 4.30pm, 4pm finish on Fridays Optional overtime available at 1.5x during the week and 2x on weekends The Person: Graduate Electronics Engineer or similar Commutable to Wakefield, or able to relocate Job Reference: BBBH 24653a Keyword: Engineer, Grad, Junior, Engineering, Testing, Electronics, EMC, Test, CE, Compliance, Certification, Training, Development, Junior, Technician, Electrical, Castleford, Wakefield, Leeds, Yorkshire, RF, Graduate If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
