Quality Inspector - Mechanical / Precision Engineering Aegina Technologies - Southmoor Lane, Havant, PO9 Full-Time Permanent 37 hours per week Monday-Thursday: 07:30-16:00 Friday: 07:30-12:30 Salary: Circa £14 - £16 per hour (DOE) Start: Immediate start available Aegina Technologies is a precision engineering manufacturer based in Havant, specialising in the subcontract production of high-accuracy components and assemblies. We supply safety- and performance-critical industries including aerospace, oil & gas, and subsea engineering, operating to stringent quality requirements within an AS9100-accredited quality management system. The Role We are seeking an experienced Quality / Mechanical Inspector to join our busy production and quality team. Key Responsibilities • Perform in-process, first-off, and final inspection of precision-engineered components • Carry out visual and dimensional inspections using hand tools and CMM equipment • Interpret complex engineering drawings and technical specifications • Produce and manage quality documentation including FAIRs, NCRs, SCARs, and related reports • Upload and submit documentation via customer portals within required deadlines • Verify material certifications and ensure full compliance with specifications • Record, investigate, and support resolution of non-conformances • Support internal and external audits (including NQA audits) • Contribute to continuous improvement and quality system development About You We are looking for someone who brings experience, accuracy, and confidence in a precision engineering setting. You will ideally have: • Previous experience in a quality inspection role within engineering/manufacturing • Strong ability to read and interpret engineering drawings • Hands-on experience with inspection equipment (micrometers, verniers, gauges, etc.) • Familiarity with AS9100 or similar quality standards (advantageous) • Experience using Aberlink CMM (preferred but not essential) • A highly methodical approach with exceptional attention to detail What We Offer • Competitive hourly rate (£14 - £16 DOE) • Permanent, stable full-time position • Early Friday finish • On-site parking • Opportunity to work within a high-precision, quality-driven engineering environment • Immediate start available How to Apply If you take pride in precision, accuracy, and maintaining high engineering standards, we'd love to hear from you. You must live in a 30-minute commute to Havant, PO9 Apply today with your CV. Closing date Friday 1 May 9am. Other suitable skills and experience include. Quality Inspector, Mechanical Inspector, Engineering Inspector, Quality Technician, Manufacturing Inspector, QC Inspector, Precision Inspector.
Apr 20, 2026
Full time
Quality Inspector - Mechanical / Precision Engineering Aegina Technologies - Southmoor Lane, Havant, PO9 Full-Time Permanent 37 hours per week Monday-Thursday: 07:30-16:00 Friday: 07:30-12:30 Salary: Circa £14 - £16 per hour (DOE) Start: Immediate start available Aegina Technologies is a precision engineering manufacturer based in Havant, specialising in the subcontract production of high-accuracy components and assemblies. We supply safety- and performance-critical industries including aerospace, oil & gas, and subsea engineering, operating to stringent quality requirements within an AS9100-accredited quality management system. The Role We are seeking an experienced Quality / Mechanical Inspector to join our busy production and quality team. Key Responsibilities • Perform in-process, first-off, and final inspection of precision-engineered components • Carry out visual and dimensional inspections using hand tools and CMM equipment • Interpret complex engineering drawings and technical specifications • Produce and manage quality documentation including FAIRs, NCRs, SCARs, and related reports • Upload and submit documentation via customer portals within required deadlines • Verify material certifications and ensure full compliance with specifications • Record, investigate, and support resolution of non-conformances • Support internal and external audits (including NQA audits) • Contribute to continuous improvement and quality system development About You We are looking for someone who brings experience, accuracy, and confidence in a precision engineering setting. You will ideally have: • Previous experience in a quality inspection role within engineering/manufacturing • Strong ability to read and interpret engineering drawings • Hands-on experience with inspection equipment (micrometers, verniers, gauges, etc.) • Familiarity with AS9100 or similar quality standards (advantageous) • Experience using Aberlink CMM (preferred but not essential) • A highly methodical approach with exceptional attention to detail What We Offer • Competitive hourly rate (£14 - £16 DOE) • Permanent, stable full-time position • Early Friday finish • On-site parking • Opportunity to work within a high-precision, quality-driven engineering environment • Immediate start available How to Apply If you take pride in precision, accuracy, and maintaining high engineering standards, we'd love to hear from you. You must live in a 30-minute commute to Havant, PO9 Apply today with your CV. Closing date Friday 1 May 9am. Other suitable skills and experience include. Quality Inspector, Mechanical Inspector, Engineering Inspector, Quality Technician, Manufacturing Inspector, QC Inspector, Precision Inspector.
Quality Manager- Worthing £50,000 - £55,000 Depending on experience A new and exciting opportunity has arisen for a Quality Manager to join a UK known component manufacturer in the Worthing area. This is a great opportunity to join an innovative and creative industry! Role & Responsibilities: Manage and maintain the AS9100-compliant Quality Management System. Lead internal, customer, and third-party audits; serve as primary point of contact for quality-related matters. Develop, implement, and monitor quality assurance procedures and work instructions for manufacturing, assembly, and inspection processes. Supervise quality department staff, including inspectors, auditors, and quality engineers. Oversee First Article Inspections (FAIs), PPAPs, and FAIR documentation per AS9102 standards. Utilize CMM machines and related inspection tools to ensure compliance with tight tolerances. Review engineering drawings, specifications, and manufacturing instructions to establish proper inspection criteria. Support new product introduction and process validation. Lead root cause analysis (RCA) and corrective/preventive actions (CAPA) for non-conformances. Manage MRB (Material Review Board) process and ensure timely disposition of nonconforming materials. Collaborate with cross-functional teams in operations, engineering, purchasing, and production to resolve quality issues. Analyze quality metrics and drive continuous improvement initiatives (Lean, Six Sigma, etc.) Train and mentor team members on quality standards and best practices. Ensure calibration of measurement equipment and inspection tools. Knowledge, Skills & Experience: Experience in quality leadership role in a high-precision manufacturing environment Strong knowledge and implementation experience with AS9100 (and ISO 9001) Hands-on experience with CNC machining, CMM inspection, tight tolerance parts, welding, fabrication, and assembly Proficient in reading GD&T and technical drawings (per ASME Y14.5) Strong familiarity with CMM programming and inspection software (e.g., PC-DMIS, Calypso) Experience with root cause analysis tools (5 Whys, Fishbone, 8D, etc Excellent leadership, organizational, and communication skills. Experience managing and mentoring a quality team. Certifications such as CQE, CQM, or Six Sigma are a plus If you believe you are a good fit for a Quality Manager then apply now! Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Apr 17, 2026
Full time
Quality Manager- Worthing £50,000 - £55,000 Depending on experience A new and exciting opportunity has arisen for a Quality Manager to join a UK known component manufacturer in the Worthing area. This is a great opportunity to join an innovative and creative industry! Role & Responsibilities: Manage and maintain the AS9100-compliant Quality Management System. Lead internal, customer, and third-party audits; serve as primary point of contact for quality-related matters. Develop, implement, and monitor quality assurance procedures and work instructions for manufacturing, assembly, and inspection processes. Supervise quality department staff, including inspectors, auditors, and quality engineers. Oversee First Article Inspections (FAIs), PPAPs, and FAIR documentation per AS9102 standards. Utilize CMM machines and related inspection tools to ensure compliance with tight tolerances. Review engineering drawings, specifications, and manufacturing instructions to establish proper inspection criteria. Support new product introduction and process validation. Lead root cause analysis (RCA) and corrective/preventive actions (CAPA) for non-conformances. Manage MRB (Material Review Board) process and ensure timely disposition of nonconforming materials. Collaborate with cross-functional teams in operations, engineering, purchasing, and production to resolve quality issues. Analyze quality metrics and drive continuous improvement initiatives (Lean, Six Sigma, etc.) Train and mentor team members on quality standards and best practices. Ensure calibration of measurement equipment and inspection tools. Knowledge, Skills & Experience: Experience in quality leadership role in a high-precision manufacturing environment Strong knowledge and implementation experience with AS9100 (and ISO 9001) Hands-on experience with CNC machining, CMM inspection, tight tolerance parts, welding, fabrication, and assembly Proficient in reading GD&T and technical drawings (per ASME Y14.5) Strong familiarity with CMM programming and inspection software (e.g., PC-DMIS, Calypso) Experience with root cause analysis tools (5 Whys, Fishbone, 8D, etc Excellent leadership, organizational, and communication skills. Experience managing and mentoring a quality team. Certifications such as CQE, CQM, or Six Sigma are a plus If you believe you are a good fit for a Quality Manager then apply now! Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Quality Inspector As a Quality Inspector, you will be responsible for conducting measurement activities to ensure compliance with technical drawings, including first-off, in-process, and final inspections. You will utilise a range of metrology equipment, from handheld mechanical measuring tools to CNC CMMs click apply for full job details
Apr 17, 2026
Full time
Quality Inspector As a Quality Inspector, you will be responsible for conducting measurement activities to ensure compliance with technical drawings, including first-off, in-process, and final inspections. You will utilise a range of metrology equipment, from handheld mechanical measuring tools to CNC CMMs click apply for full job details
Manufacturing Inspector/Quality Assurance Engineer Start Date: ASAP Duration: Permanent with a 6-month probation period. Contracted Hours: 8am-5pm Monday - Thursday and 8am -1pm Friday Salary: £45,000 - £50,000 We are seeking a detail-oriented and experienced manufacturing Inspector to join our team. This role is responsible for verifying material certification documents, conducting dimensional inspections, and ensuring compliance with engineering specifications and industry standards, including AS9100 and ISO 9001. The ideal candidate will be proficient in CMM programming and operation, with a strong understanding of FAIR and ISIR documentation requirements. This is a hands on position that plays a key role in maintaining our commitment to quality and continuous improvement across all stages of production. Key Responsibilities Review and verify material certification documents to ensure compliance with engineering drawings, specifications, and applicable standards (including AS9100 and ISO 9001). Prepare and review ISIR (Initial Sample Inspection Reports) and FAIR (First Article Inspection Reports) in accordance with customer and industry requirements. Accurately document inspection findings, including certificate conformity, observations, and any discrepancies. Interpret engineering drawings, technical specifications, and material standards to validate documentation. Offline program and operate Coordinate Measuring Machines (CMM) to carry out dimensional inspections of components. Use a range of additional inspection tools and equipment, such as micrometers, calipers, and gauges. Report non conformances promptly and collaborate with relevant departments to address quality issues. Maintain accurate and traceable inspection records in accordance with AS9100 and ISO 9001 quality management system requirements. Support continuous improvement initiatives by identifying trends and areas for enhancement in documentation control. Participate in audits, internal reviews, and relevant training to uphold and improve inspection standards. Day to day of the role Begin each day by reviewing upcoming jobs and prioritising inspections based on production schedules and customer deadlines. Cross check material certification documents against engineering drawings and specification requirements. Offline programme and run CMM inspections, ensuring accurate measurement of critical dimensions. Carry out manual inspections using handheld tools where applicable, verifying tolerances and surface finishes. Prepare and update FAIRs and ISIRs for new product introductions or customer submissions. Record all inspection findings in the quality management system and flag any deviations or non conformances. Communicate with all departments and quality teams to resolve issues and support root cause investigations. Participate in daily quality stand up meetings and contribute to continuous improvement discussions. Maintain calibration status of inspection equipment and ensure the inspection area remains clean and organised. Support audit preparation activities and respond to auditor queries with supporting documentation as needed. Required Skills & Qualifications Essential Proven experience in a quality inspection role within a manufacturing or engineering environment. Strong understanding of AS9100 and ISO 9001 quality standards. Ability to read and interpret technical drawings, GD&T, and material specifications. Proficient in programming and operating CMM equipment. Experience with FAIR and ISIR preparation. Skilled in the use of precision measuring instruments such as micrometers, calipers, height gauges, and surface testers. Excellent attention to detail with strong analytical and documentation skills. Confident communicator, able to liaise effectively across departments. Desirable Formal qualifications in mechanical or manufacturing engineering (e.g., HNC/HND, NVQ, or equivalent). Experience supporting internal and external audits. Familiarity with customer specific standards (e.g., Rolls Royce SABRe). Lean or Six Sigma awareness and involvement in continuous improvement activities. What we are looking for We're looking for someone who brings not just experience, but sound judgment and a steady hand to quality control. You'll be trusted to work autonomously, make informed decisions, and be a key point of contact when it comes to upholding quality standards. This role suits someone who others naturally turn to for guidance. Would suit someone with a calm, methodical approach, the confidence to handle complex quality challenges and a continuous improvement mindset and the ability to see the bigger picture. Opportunities for progression for the right candidate. Benefits Competitive salary based on experience. Overtime available. Friday 1 p.m. finish. Life Assurance. Cycle to Work Scheme. Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Apr 14, 2026
Full time
Manufacturing Inspector/Quality Assurance Engineer Start Date: ASAP Duration: Permanent with a 6-month probation period. Contracted Hours: 8am-5pm Monday - Thursday and 8am -1pm Friday Salary: £45,000 - £50,000 We are seeking a detail-oriented and experienced manufacturing Inspector to join our team. This role is responsible for verifying material certification documents, conducting dimensional inspections, and ensuring compliance with engineering specifications and industry standards, including AS9100 and ISO 9001. The ideal candidate will be proficient in CMM programming and operation, with a strong understanding of FAIR and ISIR documentation requirements. This is a hands on position that plays a key role in maintaining our commitment to quality and continuous improvement across all stages of production. Key Responsibilities Review and verify material certification documents to ensure compliance with engineering drawings, specifications, and applicable standards (including AS9100 and ISO 9001). Prepare and review ISIR (Initial Sample Inspection Reports) and FAIR (First Article Inspection Reports) in accordance with customer and industry requirements. Accurately document inspection findings, including certificate conformity, observations, and any discrepancies. Interpret engineering drawings, technical specifications, and material standards to validate documentation. Offline program and operate Coordinate Measuring Machines (CMM) to carry out dimensional inspections of components. Use a range of additional inspection tools and equipment, such as micrometers, calipers, and gauges. Report non conformances promptly and collaborate with relevant departments to address quality issues. Maintain accurate and traceable inspection records in accordance with AS9100 and ISO 9001 quality management system requirements. Support continuous improvement initiatives by identifying trends and areas for enhancement in documentation control. Participate in audits, internal reviews, and relevant training to uphold and improve inspection standards. Day to day of the role Begin each day by reviewing upcoming jobs and prioritising inspections based on production schedules and customer deadlines. Cross check material certification documents against engineering drawings and specification requirements. Offline programme and run CMM inspections, ensuring accurate measurement of critical dimensions. Carry out manual inspections using handheld tools where applicable, verifying tolerances and surface finishes. Prepare and update FAIRs and ISIRs for new product introductions or customer submissions. Record all inspection findings in the quality management system and flag any deviations or non conformances. Communicate with all departments and quality teams to resolve issues and support root cause investigations. Participate in daily quality stand up meetings and contribute to continuous improvement discussions. Maintain calibration status of inspection equipment and ensure the inspection area remains clean and organised. Support audit preparation activities and respond to auditor queries with supporting documentation as needed. Required Skills & Qualifications Essential Proven experience in a quality inspection role within a manufacturing or engineering environment. Strong understanding of AS9100 and ISO 9001 quality standards. Ability to read and interpret technical drawings, GD&T, and material specifications. Proficient in programming and operating CMM equipment. Experience with FAIR and ISIR preparation. Skilled in the use of precision measuring instruments such as micrometers, calipers, height gauges, and surface testers. Excellent attention to detail with strong analytical and documentation skills. Confident communicator, able to liaise effectively across departments. Desirable Formal qualifications in mechanical or manufacturing engineering (e.g., HNC/HND, NVQ, or equivalent). Experience supporting internal and external audits. Familiarity with customer specific standards (e.g., Rolls Royce SABRe). Lean or Six Sigma awareness and involvement in continuous improvement activities. What we are looking for We're looking for someone who brings not just experience, but sound judgment and a steady hand to quality control. You'll be trusted to work autonomously, make informed decisions, and be a key point of contact when it comes to upholding quality standards. This role suits someone who others naturally turn to for guidance. Would suit someone with a calm, methodical approach, the confidence to handle complex quality challenges and a continuous improvement mindset and the ability to see the bigger picture. Opportunities for progression for the right candidate. Benefits Competitive salary based on experience. Overtime available. Friday 1 p.m. finish. Life Assurance. Cycle to Work Scheme. Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
(Night Shift) Quality Control Inspector Overview A growing precision manufacturing business is seeking an experienced Quality Control Inspector to support ongoing expansion. The role focuses on ensuring product compliance across the inspection function in line with engineering drawings, customer requirements, quality procedures, and the company Quality Management System. This position suits someone confident inspecting precision-engineered components and maintaining accurate, auditable quality records. Key Responsibilities Verify conformity of parts, assemblies, and sub-assemblies in line with engineering drawings, QMS requirements, and customer specifications. Ensure all inspection records are completed accurately with full traceability. Support production teams with timely first-off verification. Create and compile First Article Inspection Reports (FAIRs). Carry out inspection duties across all manufacturing and supply chain stages as required. Identify, document, and report non-conformances in line with company procedures. Ensure compliance with all Quality Assurance and HSE procedures. Process and manage process-and-return (P&R) documentation for externally processed parts. Escalate quality concerns to production management and quality engineering teams. Contribute to problem-solving activities, root cause analysis, and preventive actions. Participate in New Product Introduction meetings, advising on inspection methodology. Support Continuous Improvement initiatives across the department. Experience Requirements Ability to interpret and understand technical data including drawings, specifications, and FAIR documentation. Experience in goods inward inspection of precision components or finished products. Aerospace sector experience beneficial but not essential. Strong background in inspecting precision-engineered components to drawing requirements. Competent in using a wide range of inspection gauges and measuring equipment. Experience operating a Co-ordinate Measuring Machine (CMM). Experience with sheet metal or fabricated parts. Qualifications & Technical Skills HND or equivalent qualification desirable. Strong understanding of imperial and metric geometrical definitions. Good knowledge of inspection, testing, and examination techniques. Ability to interpret inspection results and sanction products accordingly. Confident in reading and interpreting detailed engineering drawings. Ability to apply industry and quality standards relevant to inspection duties. Additional Desirables Knowledge of precision aerospace manufacturing processes. Experience using Javelin or other ERP/MRP systems. Awareness of MSA, NDT, SPC, ISO/ASME standards. CMM programming capability. Location: Romford Salary: 40k - 52k (OTE Night Shift) Please respond with an up to date CV to be considered.
Apr 11, 2026
Full time
(Night Shift) Quality Control Inspector Overview A growing precision manufacturing business is seeking an experienced Quality Control Inspector to support ongoing expansion. The role focuses on ensuring product compliance across the inspection function in line with engineering drawings, customer requirements, quality procedures, and the company Quality Management System. This position suits someone confident inspecting precision-engineered components and maintaining accurate, auditable quality records. Key Responsibilities Verify conformity of parts, assemblies, and sub-assemblies in line with engineering drawings, QMS requirements, and customer specifications. Ensure all inspection records are completed accurately with full traceability. Support production teams with timely first-off verification. Create and compile First Article Inspection Reports (FAIRs). Carry out inspection duties across all manufacturing and supply chain stages as required. Identify, document, and report non-conformances in line with company procedures. Ensure compliance with all Quality Assurance and HSE procedures. Process and manage process-and-return (P&R) documentation for externally processed parts. Escalate quality concerns to production management and quality engineering teams. Contribute to problem-solving activities, root cause analysis, and preventive actions. Participate in New Product Introduction meetings, advising on inspection methodology. Support Continuous Improvement initiatives across the department. Experience Requirements Ability to interpret and understand technical data including drawings, specifications, and FAIR documentation. Experience in goods inward inspection of precision components or finished products. Aerospace sector experience beneficial but not essential. Strong background in inspecting precision-engineered components to drawing requirements. Competent in using a wide range of inspection gauges and measuring equipment. Experience operating a Co-ordinate Measuring Machine (CMM). Experience with sheet metal or fabricated parts. Qualifications & Technical Skills HND or equivalent qualification desirable. Strong understanding of imperial and metric geometrical definitions. Good knowledge of inspection, testing, and examination techniques. Ability to interpret inspection results and sanction products accordingly. Confident in reading and interpreting detailed engineering drawings. Ability to apply industry and quality standards relevant to inspection duties. Additional Desirables Knowledge of precision aerospace manufacturing processes. Experience using Javelin or other ERP/MRP systems. Awareness of MSA, NDT, SPC, ISO/ASME standards. CMM programming capability. Location: Romford Salary: 40k - 52k (OTE Night Shift) Please respond with an up to date CV to be considered.
A leading engineering organization based in Aldershot is urgently seeking a Quality Inspector. The ideal candidate should have 3-5 years of experience in quality inspection, particularly with aerospace compliant equipment. Responsibilities include inspecting materials, documenting results, and raising release documents. Proficient use of micrometers, verniers, and CMM is required. Good understanding of inspection techniques and technical drawings is essential. Competitive pay is offered along with a referral scheme for successful applicants.
Apr 10, 2026
Full time
A leading engineering organization based in Aldershot is urgently seeking a Quality Inspector. The ideal candidate should have 3-5 years of experience in quality inspection, particularly with aerospace compliant equipment. Responsibilities include inspecting materials, documenting results, and raising release documents. Proficient use of micrometers, verniers, and CMM is required. Good understanding of inspection techniques and technical drawings is essential. Competitive pay is offered along with a referral scheme for successful applicants.
Quality Inspector - 4 Day Week Buckinghamshire 45,000 If you're a skilled Quality Inspector with CMM programming experience, this might be the career move you've been waiting for. Known for their precision and innovation, they're a trusted partner to some of the biggest names in these fields. The Company; This company is at the forefront of advanced manufacturing and quality assurance. They play a key role in delivering high-performance solutions to demanding industries, including Motorsport, automotive and aerospace where precision is everything. They are committed to innovation, a focus on excellence, and an environment where employees are genuinely valued. They're not just about getting the job done - they're about doing it to the highest standard, every time. Did I mention they also offer a 4-day working week? That means every week is a 3-day weekend! The work life balance on offer is not to be overlooked. What we need from you; PC-DMIS CMM Programming or Polyworks Romer Arm Programming Strong understanding of GD&T Understanding of ISO9001 and ongoing continuous improvement If you want to be a part of a team working to ever improve quality in exciting industries, click apply and Chris Smith will be in touch. Even if your CV isn't up to date, Will would be more than happy to help.
Apr 10, 2026
Full time
Quality Inspector - 4 Day Week Buckinghamshire 45,000 If you're a skilled Quality Inspector with CMM programming experience, this might be the career move you've been waiting for. Known for their precision and innovation, they're a trusted partner to some of the biggest names in these fields. The Company; This company is at the forefront of advanced manufacturing and quality assurance. They play a key role in delivering high-performance solutions to demanding industries, including Motorsport, automotive and aerospace where precision is everything. They are committed to innovation, a focus on excellence, and an environment where employees are genuinely valued. They're not just about getting the job done - they're about doing it to the highest standard, every time. Did I mention they also offer a 4-day working week? That means every week is a 3-day weekend! The work life balance on offer is not to be overlooked. What we need from you; PC-DMIS CMM Programming or Polyworks Romer Arm Programming Strong understanding of GD&T Understanding of ISO9001 and ongoing continuous improvement If you want to be a part of a team working to ever improve quality in exciting industries, click apply and Chris Smith will be in touch. Even if your CV isn't up to date, Will would be more than happy to help.
Inspector Burnley 2 Weeks Days - 2 Weeks Twilight Rotation £36,000 My client is a leading UK-based manufacturer specialising in the design and production of high-quality valves and fittings for the global tank container industry. With a strong reputation for engineering excellence, safety, and innovation, the company serves customers worldwide across a range of industrial sectors. The Role You will be expected to achieve high standards of quality, in line with targeted levels of output whilst working safely and maintaining full product traceability. You will be working as part of a team, and you are expected to contribute to improving any working processes. Responsibilities: First off and Patrol Inspection. First article inspection reports. Final view inspection of completed assemblies prior to despatch. Manually handle weights up to 25kg. Use computer equipment for data purposes. To record and maintain inspection and test records. Support the QA team and assist with internal audits. Liaise with Production Managers and Quality on corrective and preventive action. Contribute to a team working environment. Contribute to continuous improvement. Maintain safe and clean working environment by complying with procedures, rules and regulations. Observe and practice the 5S principles. The role also includes other general duties to maintain the efficient working of the Inspection Department. The above list of tasks is not exhaustive, and the post holder may be required to undertake duties as may be reasonably expected. All employees are required to be flexible and co-operative to assist in meeting business needs. Scope The ability to support Production and assist the Quality team to establish a 'right first time' philosophy throughout the organisation is critical to this post. The essential elements of this role are to always engage in production activities; take full responsibility for component inspection and eliminate waste wherever possible. All production processes, whether large or small, require elements of inspection and testing is carried out to specified requirements that have been agreed. Inspectors will be responsible for declaring that a product is not safe or is not of the specified quality. Skills and Abilities Ability to use own initiative to work as an individual or as part of a team unsupervised. Ability to operate computer equipment for data purposes. Ability to read engineering drawings and engineering quality plans. Ability to use inspection equipment - micrometres, verniers etc. A methodical approach to systems and understanding of the importance of standards and established/agreed systems of work. Able to make decisions based on experience, have confidence to act and make changes within given boundaries. Good personal organisation under pressure from time, internal and external customers. Computer literate. Time management skills. Good verbal communication and listening skills. Experience/Knowledge Ability to demonstrate competent use of general measurement equipment i.e. Verniers, Micrometres, Bowers etc is essential to fulfil this role Prior knowledge and experience of valve assembly, inspection and manufacturing would be advantageous. Experience in inspection of Milling, Turning and Welding disciplines. Experience of using CMM Operations and Faro arm. Tessa scan experience would be an advantage. Experience of NDT testing advantageous. Qualification Time served Mechanical Engineer (or have an equivalent qualification) The Candidate Strong work ethic must want to do tasks and understand their value. Reliable, general timekeeping and honesty, working unsupervised. Adaptable over a broad range of work. Motivated to take on new areas of work and learn new skills. Attention to detail, data accuracy and good personal organisation under pressure from time and internal customers. Flexibility to adapt to change and commitment to contribute to continuous improvement Please contact Marie Brisson at Winsearch UK for further information - (url removed) Winsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services. View our latest jobs today on our website(url removed) and follow us on LinkedIn. Manh INDWIN Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you! The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see (url removed)> Many Thanks
Apr 10, 2026
Full time
Inspector Burnley 2 Weeks Days - 2 Weeks Twilight Rotation £36,000 My client is a leading UK-based manufacturer specialising in the design and production of high-quality valves and fittings for the global tank container industry. With a strong reputation for engineering excellence, safety, and innovation, the company serves customers worldwide across a range of industrial sectors. The Role You will be expected to achieve high standards of quality, in line with targeted levels of output whilst working safely and maintaining full product traceability. You will be working as part of a team, and you are expected to contribute to improving any working processes. Responsibilities: First off and Patrol Inspection. First article inspection reports. Final view inspection of completed assemblies prior to despatch. Manually handle weights up to 25kg. Use computer equipment for data purposes. To record and maintain inspection and test records. Support the QA team and assist with internal audits. Liaise with Production Managers and Quality on corrective and preventive action. Contribute to a team working environment. Contribute to continuous improvement. Maintain safe and clean working environment by complying with procedures, rules and regulations. Observe and practice the 5S principles. The role also includes other general duties to maintain the efficient working of the Inspection Department. The above list of tasks is not exhaustive, and the post holder may be required to undertake duties as may be reasonably expected. All employees are required to be flexible and co-operative to assist in meeting business needs. Scope The ability to support Production and assist the Quality team to establish a 'right first time' philosophy throughout the organisation is critical to this post. The essential elements of this role are to always engage in production activities; take full responsibility for component inspection and eliminate waste wherever possible. All production processes, whether large or small, require elements of inspection and testing is carried out to specified requirements that have been agreed. Inspectors will be responsible for declaring that a product is not safe or is not of the specified quality. Skills and Abilities Ability to use own initiative to work as an individual or as part of a team unsupervised. Ability to operate computer equipment for data purposes. Ability to read engineering drawings and engineering quality plans. Ability to use inspection equipment - micrometres, verniers etc. A methodical approach to systems and understanding of the importance of standards and established/agreed systems of work. Able to make decisions based on experience, have confidence to act and make changes within given boundaries. Good personal organisation under pressure from time, internal and external customers. Computer literate. Time management skills. Good verbal communication and listening skills. Experience/Knowledge Ability to demonstrate competent use of general measurement equipment i.e. Verniers, Micrometres, Bowers etc is essential to fulfil this role Prior knowledge and experience of valve assembly, inspection and manufacturing would be advantageous. Experience in inspection of Milling, Turning and Welding disciplines. Experience of using CMM Operations and Faro arm. Tessa scan experience would be an advantage. Experience of NDT testing advantageous. Qualification Time served Mechanical Engineer (or have an equivalent qualification) The Candidate Strong work ethic must want to do tasks and understand their value. Reliable, general timekeeping and honesty, working unsupervised. Adaptable over a broad range of work. Motivated to take on new areas of work and learn new skills. Attention to detail, data accuracy and good personal organisation under pressure from time and internal customers. Flexibility to adapt to change and commitment to contribute to continuous improvement Please contact Marie Brisson at Winsearch UK for further information - (url removed) Winsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services. View our latest jobs today on our website(url removed) and follow us on LinkedIn. Manh INDWIN Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you! The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see (url removed)> Many Thanks
Quality Inspector - Aerospace Weymouth Day & Night shifts Monday-Thursday / Friday Permanent Introduction Acorn by Synergie is recruiting for a meticulous and experienced Quality Inspector to join an aerospace manufacturing team. You will play a critical role in ensuring that all components meet strict customer specifications and industry standards, contributing directly to product safety and quality. Key Duties: Perform first off, in-process, goods inwards and final inspection against engineering drawings and specifications. Complete First Article Inspection Reports (FAIRs) to AS9102 standards. Work in line with and support AS9100 Quality Management Systems. Carry out roving inspection across production areas. Inspect and release vital and flight safety parts and associated documentation packs. Use a wide range of inspection equipment including micrometers, verniers, plug and thread gauges, shadowgraphs, height gauges, CMMs, Faro Arms, surface testers, Equator systems and Keyence. Interpret and react to SPC and process capability data. Support root cause corrective action and continuous improvement activities. Maintain a clean, organised and compliant work environment. Ensure all work is carried out in line with training, authorisations and QMS requirements. Communicate inspection findings clearly to senior management and cross-functional teams. Requirements: Ability to read and interpret engineering drawings. Strong understanding of GD&T (Geometric Dimensioning and Tolerancing). Experience completing FAIRs to AS9102 standard. Apprenticeship or equivalent qualification preferred. Experience inspecting complex aerospace components preferred. Familiarity with advanced inspection equipment such as CMMs and Faro Arms preferred. Strong attention to detail and problem-solving skills. Ability to work as part of a team in a fast-paced environment. What We Offer: Day shift (39 hours per week): Monday-Thursday 7.30am-4.30pm. Friday 7.30am-12.30pm. Night shift (46 hours per week): Monday-Thursday 6pm-6am. Interested? Apply now! Acorn by Synergie acts as an employment agency for permanent recruitment.
Apr 10, 2026
Full time
Quality Inspector - Aerospace Weymouth Day & Night shifts Monday-Thursday / Friday Permanent Introduction Acorn by Synergie is recruiting for a meticulous and experienced Quality Inspector to join an aerospace manufacturing team. You will play a critical role in ensuring that all components meet strict customer specifications and industry standards, contributing directly to product safety and quality. Key Duties: Perform first off, in-process, goods inwards and final inspection against engineering drawings and specifications. Complete First Article Inspection Reports (FAIRs) to AS9102 standards. Work in line with and support AS9100 Quality Management Systems. Carry out roving inspection across production areas. Inspect and release vital and flight safety parts and associated documentation packs. Use a wide range of inspection equipment including micrometers, verniers, plug and thread gauges, shadowgraphs, height gauges, CMMs, Faro Arms, surface testers, Equator systems and Keyence. Interpret and react to SPC and process capability data. Support root cause corrective action and continuous improvement activities. Maintain a clean, organised and compliant work environment. Ensure all work is carried out in line with training, authorisations and QMS requirements. Communicate inspection findings clearly to senior management and cross-functional teams. Requirements: Ability to read and interpret engineering drawings. Strong understanding of GD&T (Geometric Dimensioning and Tolerancing). Experience completing FAIRs to AS9102 standard. Apprenticeship or equivalent qualification preferred. Experience inspecting complex aerospace components preferred. Familiarity with advanced inspection equipment such as CMMs and Faro Arms preferred. Strong attention to detail and problem-solving skills. Ability to work as part of a team in a fast-paced environment. What We Offer: Day shift (39 hours per week): Monday-Thursday 7.30am-4.30pm. Friday 7.30am-12.30pm. Night shift (46 hours per week): Monday-Thursday 6pm-6am. Interested? Apply now! Acorn by Synergie acts as an employment agency for permanent recruitment.
CMM Inspector Location: Kings Langley, Hertfordshire Salary: Negotiable (dependant on experience) Employment Type: Full-Time Permanent Benefits Modern, state-of-the-art CNC manufacturing and inspection facility Approachable and transparent management team Ongoing training and career development Friendly, supportive working environment 25 days holiday plus Bank Holidays Company pension scheme PPE provided Overview An excellent opportunity to join a high-precision CNC manufacturing business specialising in complex machined components for sectors including aerospace, defence, motorsport and robotics. Based in a clean, modern engineering facility, this role focuses on CMM inspection and programming of tight-tolerance precision machined components produced using advanced CNC machining processes. You will play a key role in ensuring components meet exact customer, drawing and quality standard requirements while supporting the inspection department with accurate measurement and reporting. The successful candidate will be confident programming CMM machines , ideally using PC-DMIS , although experience with other CMM software will also be considered. Key Responsibilities Program and operate CMM machines to inspect precision machined components Create and edit CMM programs for new and existing parts Carry out mechanical inspection of precision machined components Perform manual inspection using precision measuring equipment Interpret engineering drawings, specifications and GD&T requirements Verify CMM inspection results through manual measurement where required Complete First Article Inspection (FAI) reports and quality documentation Compile Certificates of Conformity and inspection reports Maintain component traceability and inspection records Work closely with production teams to resolve quality issues Support continuous improvement and problem-solving activities within the quality department Skills & Experience Experience programming and operating CMM equipment Experience with PC-DMIS preferred , although other CMM software will be considered Strong understanding of engineering drawings and GD&T Experience inspecting tight-tolerance machined components Good attention to detail with a methodical approach to inspection Organised, reliable and able to prioritise workload Comfortable working independently and as part of a team Basic IT skills (Microsoft Office) Advantageous Experience Experience using Visual FAIR / Q-Pulse Experience working to AS9100 or ISO 9001 standards Background in subcontract precision machining environments Experience inspecting aerospace or high-specification components Hours of Work 40hrs per week Monday to Friday - 8:00am to 4:00pm Regular overtime available (typically 10 hours per week), paid at x1.5 Why Apply? This is an opportunity to join a well-invested, high-precision engineering business where quality inspection and CMM programming play a critical role in production . You will work in a modern, clean facility inspecting complex machined components for demanding sectors using advanced inspection equipment. The company offers long-term stability, regular overtime, and the opportunity to further develop your CMM programming and quality engineering skills within a supportive and experienced engineering team. McGlynn Personnel and our clients are equal opportunity employers who seek to recruit and appoint the best available person for a job regardless of marital/civil partnership status, sex, age, religion, belief, race, nationality and ethnic or national origin, colour, sexual orientation or disability. McGlynn Personnel and our clients apply all relevant Data Protection laws when processing your Personal Data. If you choose to apply to this opportunity and share your CV or other personal information with McGlynn Personnel, these details will be held by us in accordance with our privacy policy used by our recruitment team to contact you regarding this or other relevant opportunities at McGlynn Personnel.
Apr 08, 2026
Full time
CMM Inspector Location: Kings Langley, Hertfordshire Salary: Negotiable (dependant on experience) Employment Type: Full-Time Permanent Benefits Modern, state-of-the-art CNC manufacturing and inspection facility Approachable and transparent management team Ongoing training and career development Friendly, supportive working environment 25 days holiday plus Bank Holidays Company pension scheme PPE provided Overview An excellent opportunity to join a high-precision CNC manufacturing business specialising in complex machined components for sectors including aerospace, defence, motorsport and robotics. Based in a clean, modern engineering facility, this role focuses on CMM inspection and programming of tight-tolerance precision machined components produced using advanced CNC machining processes. You will play a key role in ensuring components meet exact customer, drawing and quality standard requirements while supporting the inspection department with accurate measurement and reporting. The successful candidate will be confident programming CMM machines , ideally using PC-DMIS , although experience with other CMM software will also be considered. Key Responsibilities Program and operate CMM machines to inspect precision machined components Create and edit CMM programs for new and existing parts Carry out mechanical inspection of precision machined components Perform manual inspection using precision measuring equipment Interpret engineering drawings, specifications and GD&T requirements Verify CMM inspection results through manual measurement where required Complete First Article Inspection (FAI) reports and quality documentation Compile Certificates of Conformity and inspection reports Maintain component traceability and inspection records Work closely with production teams to resolve quality issues Support continuous improvement and problem-solving activities within the quality department Skills & Experience Experience programming and operating CMM equipment Experience with PC-DMIS preferred , although other CMM software will be considered Strong understanding of engineering drawings and GD&T Experience inspecting tight-tolerance machined components Good attention to detail with a methodical approach to inspection Organised, reliable and able to prioritise workload Comfortable working independently and as part of a team Basic IT skills (Microsoft Office) Advantageous Experience Experience using Visual FAIR / Q-Pulse Experience working to AS9100 or ISO 9001 standards Background in subcontract precision machining environments Experience inspecting aerospace or high-specification components Hours of Work 40hrs per week Monday to Friday - 8:00am to 4:00pm Regular overtime available (typically 10 hours per week), paid at x1.5 Why Apply? This is an opportunity to join a well-invested, high-precision engineering business where quality inspection and CMM programming play a critical role in production . You will work in a modern, clean facility inspecting complex machined components for demanding sectors using advanced inspection equipment. The company offers long-term stability, regular overtime, and the opportunity to further develop your CMM programming and quality engineering skills within a supportive and experienced engineering team. McGlynn Personnel and our clients are equal opportunity employers who seek to recruit and appoint the best available person for a job regardless of marital/civil partnership status, sex, age, religion, belief, race, nationality and ethnic or national origin, colour, sexual orientation or disability. McGlynn Personnel and our clients apply all relevant Data Protection laws when processing your Personal Data. If you choose to apply to this opportunity and share your CV or other personal information with McGlynn Personnel, these details will be held by us in accordance with our privacy policy used by our recruitment team to contact you regarding this or other relevant opportunities at McGlynn Personnel.
An excellent opportunity for an experienced Quality Inspector to join a well-established company. Job Type: Full-Time, Permanent. Salary: Up To £40,000 Per Annum, Depending on Experience. Location: Stalybridge, SK15. About The Company: They are specialists in high quality precision engineering, with particular expertise in specialist low volume components using on-standard and difficult to work materials for use in challenging environments. About The Role: To confirm that Customer Specifications have been met prior to despatch of components. To detect any components not meeting Customer Specifications, and prevent their despatch, until a solution has been reached with the Customer. Key Responsibilities: To measure components against engineering drawings using a variety of hand-held measuring equipment and the Coordinate Measuring Machine, to ascertain whether components meet / do not meet the Customer Specification. Hardness testing of components to ascertain whether components meet / do not meet the Customer Specification. Positive Material Identification (PMI) of material, to ascertain whether components have / have not been manufactured to Customer Specification. Identification of components in accordance with traceability requirements. Compilation of Dimensional, Hardness and PMI reports to record findings of inspections and tests. Generation of Discrepancy Reports for any discrepant components, raising awareness of the discrepancy via Management, and segregation of the components to prevent despatch. To manage the Concession Request procedure in conjunction with the QHSE Manager, to ensure satisfactory resolution is reached with the Customer. Attend and provide input at the monthly Quality Management Review meeting. Calibration of measuring equipment. Completion and forwarding of Customer generated documentation regarding product Quality. In the absence of the QHSE Manager, work with Production Supervision on Root Cause Analysis and Preventive Action in relation to discrepant components. Candidate Requirements: Minimum of two years' experience of inspecting precision engineered components. Engineering qualification such as City and Guilds, HNC etc. Formal training on CMM machines. Computer literate (MS Word, Outlook). Working knowledge of BS EN ISO 9001 Quality Management Systems. Ability to communicate clearly, both orally and in writing. Ability to work on own initiative. Ability to work under pressure, and demonstrate assertiveness. Ability to work as part of a team, and proactively contribute to the team. Ability to plan and prioritise workloads, and achieve agreed performance targets and standards. Manage time effectively. Demonstrate decision- making skills. Strong desire on Continual Improvement and Defect Prevention. Must have previous experience in a precision engineering environment using manual measurement instruments such as micrometres height gauges etc If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Apr 08, 2026
Full time
An excellent opportunity for an experienced Quality Inspector to join a well-established company. Job Type: Full-Time, Permanent. Salary: Up To £40,000 Per Annum, Depending on Experience. Location: Stalybridge, SK15. About The Company: They are specialists in high quality precision engineering, with particular expertise in specialist low volume components using on-standard and difficult to work materials for use in challenging environments. About The Role: To confirm that Customer Specifications have been met prior to despatch of components. To detect any components not meeting Customer Specifications, and prevent their despatch, until a solution has been reached with the Customer. Key Responsibilities: To measure components against engineering drawings using a variety of hand-held measuring equipment and the Coordinate Measuring Machine, to ascertain whether components meet / do not meet the Customer Specification. Hardness testing of components to ascertain whether components meet / do not meet the Customer Specification. Positive Material Identification (PMI) of material, to ascertain whether components have / have not been manufactured to Customer Specification. Identification of components in accordance with traceability requirements. Compilation of Dimensional, Hardness and PMI reports to record findings of inspections and tests. Generation of Discrepancy Reports for any discrepant components, raising awareness of the discrepancy via Management, and segregation of the components to prevent despatch. To manage the Concession Request procedure in conjunction with the QHSE Manager, to ensure satisfactory resolution is reached with the Customer. Attend and provide input at the monthly Quality Management Review meeting. Calibration of measuring equipment. Completion and forwarding of Customer generated documentation regarding product Quality. In the absence of the QHSE Manager, work with Production Supervision on Root Cause Analysis and Preventive Action in relation to discrepant components. Candidate Requirements: Minimum of two years' experience of inspecting precision engineered components. Engineering qualification such as City and Guilds, HNC etc. Formal training on CMM machines. Computer literate (MS Word, Outlook). Working knowledge of BS EN ISO 9001 Quality Management Systems. Ability to communicate clearly, both orally and in writing. Ability to work on own initiative. Ability to work under pressure, and demonstrate assertiveness. Ability to work as part of a team, and proactively contribute to the team. Ability to plan and prioritise workloads, and achieve agreed performance targets and standards. Manage time effectively. Demonstrate decision- making skills. Strong desire on Continual Improvement and Defect Prevention. Must have previous experience in a precision engineering environment using manual measurement instruments such as micrometres height gauges etc If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
A Quality Control Inspector makes the final confirmation when it comes to the quality of a product. They are also responsible for testing components that are used in the manufacture of a finished product. A Quality Control Inspector uses various measuring tools to ensure parts conform to standard requirements Responsibilities They examine raw materials and make sure that manufacturing results meet internal standards for production. The Quality Control Inspector also monitors the production line cycle and shares findings with relevant stakeholders. The main task of the Quality Control Inspector is to prevent errors from occurring within the manufacturing process. A Quality Control Inspector ensures that production standards are met and maintained for a given product before it leaves the place it's manufactured in. They perform inspections on random samples from production, identify defects in the manufacturing process and correct them. The Quality Control Inspector organises inspections according to internal and legal standards. It is their job to ensure that a quality product is delivered for consumers. Requirements Inspection: Perform visual, physical, and functional inspections of raw materials, in process components, and finished products. Measurement: Use precision tools such as micrometers, verniers, height gauges, shadow graphs and CMMs to verify dimensions against engineering drawings and specifications. Compliance: Ensure adherence to ISO 9001, Good Manufacturing Practices (GMP), or industry specific standards e.g., AS9100 for aerospace. Including all standards, internal policies, procedures and legal regulations that apply to the finished product. Documentation: Record inspection results, maintain accurate logs, and prepare non conformance reports for rejected items. Problem Solving: Collaborate with production teams to identify root causes of defects and suggest process improvements, questioning the nature of defects while providing future solutions. Calibration: Control, maintain and calibrate inspection equipment to ensure usage logs are documented and accuracy is maintained. Apply If this position interests you, and you would like to learn more or explore other available jobs that could also match your skill set, please apply today or email
Apr 07, 2026
Full time
A Quality Control Inspector makes the final confirmation when it comes to the quality of a product. They are also responsible for testing components that are used in the manufacture of a finished product. A Quality Control Inspector uses various measuring tools to ensure parts conform to standard requirements Responsibilities They examine raw materials and make sure that manufacturing results meet internal standards for production. The Quality Control Inspector also monitors the production line cycle and shares findings with relevant stakeholders. The main task of the Quality Control Inspector is to prevent errors from occurring within the manufacturing process. A Quality Control Inspector ensures that production standards are met and maintained for a given product before it leaves the place it's manufactured in. They perform inspections on random samples from production, identify defects in the manufacturing process and correct them. The Quality Control Inspector organises inspections according to internal and legal standards. It is their job to ensure that a quality product is delivered for consumers. Requirements Inspection: Perform visual, physical, and functional inspections of raw materials, in process components, and finished products. Measurement: Use precision tools such as micrometers, verniers, height gauges, shadow graphs and CMMs to verify dimensions against engineering drawings and specifications. Compliance: Ensure adherence to ISO 9001, Good Manufacturing Practices (GMP), or industry specific standards e.g., AS9100 for aerospace. Including all standards, internal policies, procedures and legal regulations that apply to the finished product. Documentation: Record inspection results, maintain accurate logs, and prepare non conformance reports for rejected items. Problem Solving: Collaborate with production teams to identify root causes of defects and suggest process improvements, questioning the nature of defects while providing future solutions. Calibration: Control, maintain and calibrate inspection equipment to ensure usage logs are documented and accuracy is maintained. Apply If this position interests you, and you would like to learn more or explore other available jobs that could also match your skill set, please apply today or email
We are seeking an experienced, highly analytical Quality Control Inspector to join our Quality team at ZeroAvia. This role plays a critical part in ensuring our hydrogen electric powertrain products meet all applicable regulatory, customer, and aerospace quality requirements. The ideal candidate will bring strong aerospace inspection experience, exceptional attention to detail, and the ability to interpret approved design data within a fast moving, innovative environment. You will work closely with engineering, manufacturing, supply chain, and suppliers to ensure product conformity throughout the production lifecycle. Responsibilities: Perform preliminary, receiving, in process, and final inspections of aircraft components in accordance with ZeroAvia (ZA) design data, industry standards, customer requirements, and regulatory requirements Conduct incoming inspections of purchased parts, materials, and aircraft components to verify condition, finish, dimensions, configuration, and compliance with inspection plans Interpret engineering drawings and approved design data, including GD&T Use a wide range of measuring and inspection tools (e.g. calipers, micrometers, multimeters, radius gauges) and support CMM inspection activities Perform and document First Article Inspections (FAI) in accordance with AS9102 Develop, maintain, and help lead quality inspection processes including incoming inspection, in process inspection, FAI, characteristics verification, and product conformity Verify and review supplier submitted documentation and certification data Document inspection results through inspection plans, reports, and proprietary quality systems Raise, document, and support resolution of non conformities in accordance with ZA procedures Maintain accurate receiving and inspection records Support internal and external (supplier and regulatory) audits Conduct supplier source inspections as required, including occasional international travel Qualifications and Expertise Required: Minimum 3 years' experience in aerospace final inspection within a Production Certificate Organisation Minimum 8 years' experience in final inspection of mechanical, electrical, and electronic components Strong working knowledge of AS9100 and AS9102 Proven experience performing and recording First Article Inspections (FAI) Ability to read, interpret, and apply engineering drawings and GD&T Hands on experience using inspection and test equipment (digital multimeter, calipers, micrometers, radius gauges, etc.) Knowledge of and experience with special processes and NADCAP requirements Experience using ERP and quality systems (e.g. SAP, Oracle, NetSuite, Siemens, TipQA) and Microsoft Office tools High School Diploma, Associate Degree, or Bachelor's Degree Strong written and verbal communication skills in English Ability to work independently and as part of a small, fast paced team Desirable: Experience in electrical and electronics manufacturing and inspection Familiarity with IPC A 610, IPC A 620, and J STD 001 Familiarity with P21J environments Additional language skills Willingness and ability to travel internationally on occasion At ZeroAvia, we're clean sky thinkers. For the world to achieve truly clean, guilt free flight, we need a scalable solution; hydrogen electric powertrains. As a leader in zero emission aviation and a UK Jet Zero Council member, we're designing and commercialising hydrogen powered solutions that will positively impact the future of aviation, global connectivity, and the world. Engineering designs our next generation hydrogen electric engines. Working across Hydrogen, Propulsion and Integration divisions, they solve technical problems and help decarbonise aviation by finding solutions for electric propulsion, hydrogen storage, fuel cell technology, power distribution, thermal management and more. Cotswold Airport (Kemble) Join us at Cotswold Airport, home to some of our aircraft and the workplace of many ZeroAvians. Located just outside the historic market town of Cirencester, you'll experience a workspace built by engineers for engineers. This is a high velocity and fast paced environment with good links to the M4 and M5, so it's fitting that it's also our UK Head Office. Why Join Us? We want to help you be your best self, at work and at home, that's why we provide our employees with Private health and dental care - get access to services and support when you need them. Add your family members too Mental health support - enjoy a culture where positive mental health is front of mind with our trained Mental Health First Aiders, Employee Assistance Programmes and wellbeing support. Free lunch and healthy snacks - keeping you fuelled up so you can help us deliver the technology of the future Sports, games and culture clubs - connect and keep fit with other ZeroAvians by joining one of our subsidised clubs - such as, running, cycling, padel, trivia, theatre and gardening. We also offer: Stock options - so you can share in our success. 25 days holiday, plus public holidays - to help you manage your work life balance. Free EV Charging and membership in our EV Club. Salary Sacrifice Schemes for EV Club, Curry's Tech, Cycle to Work, and Ikea Furniture. Weekly Spot Bonuses to reward excellence. Income Protection and Legal Support for peace of mind. Relocation Support to make your move seamless. Diversity and Inclusion As an emergent company shaping the aviation industry, we know that diversity fuels success and unlocks potential. We embrace being an equal opportunity employer and actively seek individuals from diverse backgrounds. We value the multitude of skills, perspectives, and mindsets everyone can bring to the table. These experiences ignite creativity, originality, and growth. We proudly reject discrimination in all forms, including that based on race, religion, color, national origin, sex, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
Apr 07, 2026
Full time
We are seeking an experienced, highly analytical Quality Control Inspector to join our Quality team at ZeroAvia. This role plays a critical part in ensuring our hydrogen electric powertrain products meet all applicable regulatory, customer, and aerospace quality requirements. The ideal candidate will bring strong aerospace inspection experience, exceptional attention to detail, and the ability to interpret approved design data within a fast moving, innovative environment. You will work closely with engineering, manufacturing, supply chain, and suppliers to ensure product conformity throughout the production lifecycle. Responsibilities: Perform preliminary, receiving, in process, and final inspections of aircraft components in accordance with ZeroAvia (ZA) design data, industry standards, customer requirements, and regulatory requirements Conduct incoming inspections of purchased parts, materials, and aircraft components to verify condition, finish, dimensions, configuration, and compliance with inspection plans Interpret engineering drawings and approved design data, including GD&T Use a wide range of measuring and inspection tools (e.g. calipers, micrometers, multimeters, radius gauges) and support CMM inspection activities Perform and document First Article Inspections (FAI) in accordance with AS9102 Develop, maintain, and help lead quality inspection processes including incoming inspection, in process inspection, FAI, characteristics verification, and product conformity Verify and review supplier submitted documentation and certification data Document inspection results through inspection plans, reports, and proprietary quality systems Raise, document, and support resolution of non conformities in accordance with ZA procedures Maintain accurate receiving and inspection records Support internal and external (supplier and regulatory) audits Conduct supplier source inspections as required, including occasional international travel Qualifications and Expertise Required: Minimum 3 years' experience in aerospace final inspection within a Production Certificate Organisation Minimum 8 years' experience in final inspection of mechanical, electrical, and electronic components Strong working knowledge of AS9100 and AS9102 Proven experience performing and recording First Article Inspections (FAI) Ability to read, interpret, and apply engineering drawings and GD&T Hands on experience using inspection and test equipment (digital multimeter, calipers, micrometers, radius gauges, etc.) Knowledge of and experience with special processes and NADCAP requirements Experience using ERP and quality systems (e.g. SAP, Oracle, NetSuite, Siemens, TipQA) and Microsoft Office tools High School Diploma, Associate Degree, or Bachelor's Degree Strong written and verbal communication skills in English Ability to work independently and as part of a small, fast paced team Desirable: Experience in electrical and electronics manufacturing and inspection Familiarity with IPC A 610, IPC A 620, and J STD 001 Familiarity with P21J environments Additional language skills Willingness and ability to travel internationally on occasion At ZeroAvia, we're clean sky thinkers. For the world to achieve truly clean, guilt free flight, we need a scalable solution; hydrogen electric powertrains. As a leader in zero emission aviation and a UK Jet Zero Council member, we're designing and commercialising hydrogen powered solutions that will positively impact the future of aviation, global connectivity, and the world. Engineering designs our next generation hydrogen electric engines. Working across Hydrogen, Propulsion and Integration divisions, they solve technical problems and help decarbonise aviation by finding solutions for electric propulsion, hydrogen storage, fuel cell technology, power distribution, thermal management and more. Cotswold Airport (Kemble) Join us at Cotswold Airport, home to some of our aircraft and the workplace of many ZeroAvians. Located just outside the historic market town of Cirencester, you'll experience a workspace built by engineers for engineers. This is a high velocity and fast paced environment with good links to the M4 and M5, so it's fitting that it's also our UK Head Office. Why Join Us? We want to help you be your best self, at work and at home, that's why we provide our employees with Private health and dental care - get access to services and support when you need them. Add your family members too Mental health support - enjoy a culture where positive mental health is front of mind with our trained Mental Health First Aiders, Employee Assistance Programmes and wellbeing support. Free lunch and healthy snacks - keeping you fuelled up so you can help us deliver the technology of the future Sports, games and culture clubs - connect and keep fit with other ZeroAvians by joining one of our subsidised clubs - such as, running, cycling, padel, trivia, theatre and gardening. We also offer: Stock options - so you can share in our success. 25 days holiday, plus public holidays - to help you manage your work life balance. Free EV Charging and membership in our EV Club. Salary Sacrifice Schemes for EV Club, Curry's Tech, Cycle to Work, and Ikea Furniture. Weekly Spot Bonuses to reward excellence. Income Protection and Legal Support for peace of mind. Relocation Support to make your move seamless. Diversity and Inclusion As an emergent company shaping the aviation industry, we know that diversity fuels success and unlocks potential. We embrace being an equal opportunity employer and actively seek individuals from diverse backgrounds. We value the multitude of skills, perspectives, and mindsets everyone can bring to the table. These experiences ignite creativity, originality, and growth. We proudly reject discrimination in all forms, including that based on race, religion, color, national origin, sex, gender expression, sexual orientation, age, marital status, veteran status, or disability status.
Quality Inspector Aldershot £18 - £20ph Plus Shift Allowance Quality Inspector Urgently required to work for a world leading Engineering organisation based in Aldershot, We are looking for an experienced Inspector who ideally has experience of inspection of aerospace and aviation compliant equipment. This is a critical role to the business and you will be required to conduct a range of mechanical inspection, document inspection results, input data into quality database, raising and signing release documents in line with QMS directives and customer requirements. This is an out and out quality inspection role that will require the use of micrometers, verniers, DTis, height gauges, shadowgraphs, CMM, etc. Key Responsibilities Inspection and approval of incoming/outgoing materials and products by confirming specifications, conducting visual and measurement tests Reporting to Head of Inspection/QA any non conforming materials/products. Perform first off, in-process and final inspection by confirming specifications, conducting visual and measurement tests, communicating required adjustments. Read technical drawings, control plans, and specifications to understand the requirements of products and services. Document inspection results by completing reports and logs, summarizes re-work and waste, and inputs data into quality database. Raising and signing release documents (CofC, Advice Notes, etc.) Keeps measurement equipment operating by following operating instructions and calibration requirements, and reporting to QA any faulty or out of calibration equipment. Communicating with the Quality/Engineering department about how to prevent similar defects in the future. Skills and Qualifications/experience A minimum of 3-5 years experience in a similar role (preferred). Strong understanding of quality control/inspection standards and testing techniques/methods (use of micrometers, verniers, DTis, height gauges, shadowgraphs, CMM, etc.) (required). Strong understanding technical drawings and GD&T (required). RCCA knowledge (including 8D methodology) Good math and technical skills (required). Good knowledge of MS Office (preferred). General knowledge of gear metrology (preferred). FAIR/PPAP knowledge (preferred). If you have the above skills and wish to be considered for this position or find out more details then please contact Nathan Woakes on or submit your CV to alternatively, apply to this advert! Proactive also offer a referral scheme for successful applicants - if you know anyone that could be suited to this position then please contact Proactive with there details and if they are placed by Proactive you will receive £250. T&Cs apply Proactive Technical Recruitment is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
Apr 06, 2026
Full time
Quality Inspector Aldershot £18 - £20ph Plus Shift Allowance Quality Inspector Urgently required to work for a world leading Engineering organisation based in Aldershot, We are looking for an experienced Inspector who ideally has experience of inspection of aerospace and aviation compliant equipment. This is a critical role to the business and you will be required to conduct a range of mechanical inspection, document inspection results, input data into quality database, raising and signing release documents in line with QMS directives and customer requirements. This is an out and out quality inspection role that will require the use of micrometers, verniers, DTis, height gauges, shadowgraphs, CMM, etc. Key Responsibilities Inspection and approval of incoming/outgoing materials and products by confirming specifications, conducting visual and measurement tests Reporting to Head of Inspection/QA any non conforming materials/products. Perform first off, in-process and final inspection by confirming specifications, conducting visual and measurement tests, communicating required adjustments. Read technical drawings, control plans, and specifications to understand the requirements of products and services. Document inspection results by completing reports and logs, summarizes re-work and waste, and inputs data into quality database. Raising and signing release documents (CofC, Advice Notes, etc.) Keeps measurement equipment operating by following operating instructions and calibration requirements, and reporting to QA any faulty or out of calibration equipment. Communicating with the Quality/Engineering department about how to prevent similar defects in the future. Skills and Qualifications/experience A minimum of 3-5 years experience in a similar role (preferred). Strong understanding of quality control/inspection standards and testing techniques/methods (use of micrometers, verniers, DTis, height gauges, shadowgraphs, CMM, etc.) (required). Strong understanding technical drawings and GD&T (required). RCCA knowledge (including 8D methodology) Good math and technical skills (required). Good knowledge of MS Office (preferred). General knowledge of gear metrology (preferred). FAIR/PPAP knowledge (preferred). If you have the above skills and wish to be considered for this position or find out more details then please contact Nathan Woakes on or submit your CV to alternatively, apply to this advert! Proactive also offer a referral scheme for successful applicants - if you know anyone that could be suited to this position then please contact Proactive with there details and if they are placed by Proactive you will receive £250. T&Cs apply Proactive Technical Recruitment is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy.
A leading quality management provider in the United Kingdom is seeking a skilled Quality Inspection Technician to work in a fast-paced manufacturing environment. The ideal candidate should have proven experience with FARO Arm / Absolute Arm CMM and PolyWorks programming. Responsibilities include programming and inspecting using portable CMM equipment, producing measurement reports, and supporting new product introduction. The position offers competitive salary and long-term opportunities in a supportive quality team.
Apr 05, 2026
Full time
A leading quality management provider in the United Kingdom is seeking a skilled Quality Inspection Technician to work in a fast-paced manufacturing environment. The ideal candidate should have proven experience with FARO Arm / Absolute Arm CMM and PolyWorks programming. Responsibilities include programming and inspecting using portable CMM equipment, producing measurement reports, and supporting new product introduction. The position offers competitive salary and long-term opportunities in a supportive quality team.
My client is an accredited and are currently working towards AS9100 certification. They specialise in delivering precision-machined components for a wide range of high-value industries, including Medical, Motorsport, Oil & Gas, Defence, and Aerospace. Operating from a modern 20,000 sq. ft. facility, the company has made significant investments in machinery, technology, and people to support continued growth. Now seeking a Mechanical Inspector to join their well-equipped Inspection Department and play a key role in supporting the company s ongoing expansion. Key Technical Skills Previous experience in a similar inspection role, ideally within aerospace or precision component manufacturing, with knowledge of AS9100 standards. Proficiency in using standard calibrated measuring instruments (e.g., micrometers, verniers, shadowgraphs). Hands-on experience with CMM inspection methods, both manual and CNC (familiarity with Aberlink systems/software is advantageous, though training will be provided). Competent PC skills, including Microsoft Word and Excel. Experience producing accurate FAIR documentation, including AS9102 compliance for aerospace. Personal Attributes A strong team player with a flexible and proactive approach, able to meet the demands of a fast-paced production environment. Clear communicator, confident, and professional in presentation. Strong problem-solving ability, attention to detail, and capable of working to tight deadlines while managing multiple tasks.
Apr 04, 2026
Full time
My client is an accredited and are currently working towards AS9100 certification. They specialise in delivering precision-machined components for a wide range of high-value industries, including Medical, Motorsport, Oil & Gas, Defence, and Aerospace. Operating from a modern 20,000 sq. ft. facility, the company has made significant investments in machinery, technology, and people to support continued growth. Now seeking a Mechanical Inspector to join their well-equipped Inspection Department and play a key role in supporting the company s ongoing expansion. Key Technical Skills Previous experience in a similar inspection role, ideally within aerospace or precision component manufacturing, with knowledge of AS9100 standards. Proficiency in using standard calibrated measuring instruments (e.g., micrometers, verniers, shadowgraphs). Hands-on experience with CMM inspection methods, both manual and CNC (familiarity with Aberlink systems/software is advantageous, though training will be provided). Competent PC skills, including Microsoft Word and Excel. Experience producing accurate FAIR documentation, including AS9102 compliance for aerospace. Personal Attributes A strong team player with a flexible and proactive approach, able to meet the demands of a fast-paced production environment. Clear communicator, confident, and professional in presentation. Strong problem-solving ability, attention to detail, and capable of working to tight deadlines while managing multiple tasks.
We're recruiting on behalf of an established engineering/manufacturing client who are looking to hire a Mechanical Inspector to join their Quality team, reporting to the QA Manager. This role is responsible for ensuring mechanical components, sub-assemblies and finished items meet engineering, quality and compliance requirements, supporting production continuity and customer expectations. Mechanical Inspector - Key responsibilities - Quality, Inspection, Manufacturing, Engineering Inspect incoming components against drawings, specifications and purchase order requirements Carry out in-process and final inspections of mechanical parts and assemblies Identify, document and raise non-conformances in line with QMS procedures Support root cause analysis and corrective actions where required Interpret engineering drawings, tolerances and technical specifications Complete dimensional inspection using manual measuring tools and CMM (where applicable) Maintain calibration status and traceability of inspection equipment Record inspection results and quality data accurately in the ERP system Support goods-in and goods-out checks during busy periods Maintain housekeeping standards and follow safety/compliance requirements Mechanical Inspector - Experience - Quality, Inspection, Manufacturing, Engineering Mechanical engineering background or strong practical inspection experience Confident reading and interpreting mechanical engineering drawings Mechanical inspection or quality assurance experience ERP experience and good MS Office skills Strong attention to detail and a methodical approach Mechanical Inspector, Quality, Inspection, Manufacturing, Engineering If you're interested, apply today and we'll share full details of the client and next steps.
Apr 01, 2026
Full time
We're recruiting on behalf of an established engineering/manufacturing client who are looking to hire a Mechanical Inspector to join their Quality team, reporting to the QA Manager. This role is responsible for ensuring mechanical components, sub-assemblies and finished items meet engineering, quality and compliance requirements, supporting production continuity and customer expectations. Mechanical Inspector - Key responsibilities - Quality, Inspection, Manufacturing, Engineering Inspect incoming components against drawings, specifications and purchase order requirements Carry out in-process and final inspections of mechanical parts and assemblies Identify, document and raise non-conformances in line with QMS procedures Support root cause analysis and corrective actions where required Interpret engineering drawings, tolerances and technical specifications Complete dimensional inspection using manual measuring tools and CMM (where applicable) Maintain calibration status and traceability of inspection equipment Record inspection results and quality data accurately in the ERP system Support goods-in and goods-out checks during busy periods Maintain housekeeping standards and follow safety/compliance requirements Mechanical Inspector - Experience - Quality, Inspection, Manufacturing, Engineering Mechanical engineering background or strong practical inspection experience Confident reading and interpreting mechanical engineering drawings Mechanical inspection or quality assurance experience ERP experience and good MS Office skills Strong attention to detail and a methodical approach Mechanical Inspector, Quality, Inspection, Manufacturing, Engineering If you're interested, apply today and we'll share full details of the client and next steps.
JOB DESCRIPTIONAerospace MRO Industry UKJob Title: InspectorReporting to: Section ManagerAbout the RoleThe successful candidate will be responsible for the detailed inspection of aircraft components using an industry-standard ERP system to record the condition of components and create a cost-effective repair route sheet, in accordance with OEM CMMs and SOPMs. Duties and ResponsibilitiesUndertake and complete detailed inspection of all components (with the exception of components requiring a quarantine process due to incident/accident), using the latest criteria and inspection equipment.Creation and modification of component overhaul/repair routes within the ERP system as required.Ensure all information (P/N, S/N and Condition) is recorded accurately in the shop Repair Order and ERP system.Carry out accurate measurement of components where required due to workload.Work to production priority lists and milestone dates as provided by Production Control.Interface with Technical Engineering and other production departments where necessary.Other duties as directed by the Section Manager, Team Leader or Leading Hand.Train and mentor other team personnel within the role, subject to qualifications and experience.Maintain a personal Practical Experience Record (PER) book.Actively participate in department daily dialogue meetings. Other RequirementsPromote and monitor compliance with legislation, company policy and codes of practice relating to Health and Safety at work.Be aware of and work within company policies, procedures and agreements.Avoid setting precedents which could be detrimental to operations and business.Maintain an awareness of the Major Accident Prevention Plan (MAPP).Be aware of and understand responsibilities outlined in the company's environmental procedures.All duties shall be undertaken in compliance with Safety and Environmental Regulations and Company Procedures. Education and QualificationsAerospace apprenticeship would be desirable.Qualification in an engineering subject would be desirable. Experience and KnowledgeExperience within an Aerospace Engineering or equivalent environment.Previous mechanical component inspection background.Previous experience working within a SAP or equivalent ERP computer system would be advantageous.Good knowledge of inspection techniques and equipment.Previous practical experience using imperial measurement tools such as micrometres, callipers and precision measuring tools.Previous knowledge of OEM manuals and manufacturer technical websites. Personal QualitiesGood communication skills.Excellent attitude to workshop housekeeping.Able to work to tight deadlines.Flexible approach to work.Excellent team player. Direct ReportsNo direct reports. Working ConditionsShift work: Monday to Friday or Tuesday to Saturday.May require additional overtime hours to be worked.Working with computers and screens for prolonged periods.Sitting down for the majority of the working day.Workshop environment with fluctuating temperatures dependent upon time of year and ongoing operations.Occasional loud noises from machinery and other production department activity. Additional RequirementsCandidate must have the right to live and work in the UK unrestricted.Mandatory training will be required.Very good (aided or unaided) vision to allow defects to be detected.Occasional lifting of heavy components.Able to sit down for prolonged periods of time. Interested in This Role? If interested, please reach out for more information about this position: Max HawkinsCallum Wallis
Apr 01, 2026
Full time
JOB DESCRIPTIONAerospace MRO Industry UKJob Title: InspectorReporting to: Section ManagerAbout the RoleThe successful candidate will be responsible for the detailed inspection of aircraft components using an industry-standard ERP system to record the condition of components and create a cost-effective repair route sheet, in accordance with OEM CMMs and SOPMs. Duties and ResponsibilitiesUndertake and complete detailed inspection of all components (with the exception of components requiring a quarantine process due to incident/accident), using the latest criteria and inspection equipment.Creation and modification of component overhaul/repair routes within the ERP system as required.Ensure all information (P/N, S/N and Condition) is recorded accurately in the shop Repair Order and ERP system.Carry out accurate measurement of components where required due to workload.Work to production priority lists and milestone dates as provided by Production Control.Interface with Technical Engineering and other production departments where necessary.Other duties as directed by the Section Manager, Team Leader or Leading Hand.Train and mentor other team personnel within the role, subject to qualifications and experience.Maintain a personal Practical Experience Record (PER) book.Actively participate in department daily dialogue meetings. Other RequirementsPromote and monitor compliance with legislation, company policy and codes of practice relating to Health and Safety at work.Be aware of and work within company policies, procedures and agreements.Avoid setting precedents which could be detrimental to operations and business.Maintain an awareness of the Major Accident Prevention Plan (MAPP).Be aware of and understand responsibilities outlined in the company's environmental procedures.All duties shall be undertaken in compliance with Safety and Environmental Regulations and Company Procedures. Education and QualificationsAerospace apprenticeship would be desirable.Qualification in an engineering subject would be desirable. Experience and KnowledgeExperience within an Aerospace Engineering or equivalent environment.Previous mechanical component inspection background.Previous experience working within a SAP or equivalent ERP computer system would be advantageous.Good knowledge of inspection techniques and equipment.Previous practical experience using imperial measurement tools such as micrometres, callipers and precision measuring tools.Previous knowledge of OEM manuals and manufacturer technical websites. Personal QualitiesGood communication skills.Excellent attitude to workshop housekeeping.Able to work to tight deadlines.Flexible approach to work.Excellent team player. Direct ReportsNo direct reports. Working ConditionsShift work: Monday to Friday or Tuesday to Saturday.May require additional overtime hours to be worked.Working with computers and screens for prolonged periods.Sitting down for the majority of the working day.Workshop environment with fluctuating temperatures dependent upon time of year and ongoing operations.Occasional loud noises from machinery and other production department activity. Additional RequirementsCandidate must have the right to live and work in the UK unrestricted.Mandatory training will be required.Very good (aided or unaided) vision to allow defects to be detected.Occasional lifting of heavy components.Able to sit down for prolonged periods of time. Interested in This Role? If interested, please reach out for more information about this position: Max HawkinsCallum Wallis
Ernest Gordon Recruitment Limited
Chorley, Lancashire
Quality Inspector (4 Day Working Week) Chorley £30,000 - £35,000 + Flexible 38 Hour Working Week + 4-Day Working Week + Career Progression Are you an Inspector or similar with experience operating a Manual CMM Machine, looking for a stable role within a well-established Precision Engineering company, with the opportunity of in-house training and a well as a flexible 38-hour working week spanning Monday to Thursday? Do you want the chance to work in a role within a Precision Engineering company with a distinguished reputation spanning 50 years, with a flexible 38-hour working week spanning from Monday to Thursday, in-house training in the company's expertise and career progression opportunities. On offer is the opportunity to be part of a business established since the 1970's, working in the automobile, scientific, nuclear, and food industries, manufacturing precision engineered components, with an unmatched reputation, who value and champion their employees through in-house training and flexible working hours. In this role you will be inspecting precision components from the beginning to the end of the manufacturing process, interpreting technical drawings, using handheld measuring equipment, as well as working and coordinating a CMM measuring machine. This role would suit an Inspector or similar with experience operating a Manual CMM Machine, looking for a stable role within a long-standing company, with the added benefit of in-house training and a flexible 38-hour working week spanning Monday to Thursday. The Role: Inspecting Manufactured Products from beginning to end Operating a Manual CMM Machine 38-Hour Working Week across Monday to Thursday The Person Inspector from a manufacturing background Ability to interpret technical drawings of products prior to their manufacture Commutable distance to Chorley BBBH19184EZ Key Words: Inspector, Engineering, Engineering Inspector, Manufacturing Inspector, Manufacturing, Quality Engineer, Precision Components, Technical Drawings, 4 Day Working Week, Training, Chorley, Preston, Bolton If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Apr 01, 2026
Full time
Quality Inspector (4 Day Working Week) Chorley £30,000 - £35,000 + Flexible 38 Hour Working Week + 4-Day Working Week + Career Progression Are you an Inspector or similar with experience operating a Manual CMM Machine, looking for a stable role within a well-established Precision Engineering company, with the opportunity of in-house training and a well as a flexible 38-hour working week spanning Monday to Thursday? Do you want the chance to work in a role within a Precision Engineering company with a distinguished reputation spanning 50 years, with a flexible 38-hour working week spanning from Monday to Thursday, in-house training in the company's expertise and career progression opportunities. On offer is the opportunity to be part of a business established since the 1970's, working in the automobile, scientific, nuclear, and food industries, manufacturing precision engineered components, with an unmatched reputation, who value and champion their employees through in-house training and flexible working hours. In this role you will be inspecting precision components from the beginning to the end of the manufacturing process, interpreting technical drawings, using handheld measuring equipment, as well as working and coordinating a CMM measuring machine. This role would suit an Inspector or similar with experience operating a Manual CMM Machine, looking for a stable role within a long-standing company, with the added benefit of in-house training and a flexible 38-hour working week spanning Monday to Thursday. The Role: Inspecting Manufactured Products from beginning to end Operating a Manual CMM Machine 38-Hour Working Week across Monday to Thursday The Person Inspector from a manufacturing background Ability to interpret technical drawings of products prior to their manufacture Commutable distance to Chorley BBBH19184EZ Key Words: Inspector, Engineering, Engineering Inspector, Manufacturing Inspector, Manufacturing, Quality Engineer, Precision Components, Technical Drawings, 4 Day Working Week, Training, Chorley, Preston, Bolton If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.
Key Responsibilities:Inspects and approves incoming/outgoing materials/products by confirming specifications, conducting visual and measurement tests, and reporting to Head of Inspection/QA any non conforming materials/products.Perform first off, in-process and final inspection by confirming specifications, conducting visual and measurement tests, communicating required adjustments to production supervisor/operator.Read technical drawings, control plans, and specifications to understand the requirements of products and services.Document inspection results by completing reports and logs, summarizes re-work and waste, and inputs data into quality database. Raising and signing release documents (CofC, Advice Notes, etc.)Keeps measurement equipment operating by following operating instructions and calibration requirements, and reporting to QA any faulty or out of calibration equipment.Communicating with the Quality/Engineering department about how to prevent similar defects in the future.Carry out such other reasonable duties within the business from time to time.Adhere to the company's health and safety requirements and complete training as required.Skills and Qualifications/experience: A minimum of 3-5 years experience in a similar role (preferred). Strong understanding of quality control/inspection standards and testing techniques/methods (use of micrometers, verniers, DTis, height gauges, shadowgraphs, CMM, etc.) (required). Strong understanding technical drawings and GD&T (required). RCCA knowledge (including 8D methodology) Good math and technical skills (required). Good knowledge of MS Office (preferred). General knowledge of gear metrology (preferred). FAIR/PPAP knowledge (preferred). Ability to work in fast paced environment/under pressure (required).
Apr 01, 2026
Full time
Key Responsibilities:Inspects and approves incoming/outgoing materials/products by confirming specifications, conducting visual and measurement tests, and reporting to Head of Inspection/QA any non conforming materials/products.Perform first off, in-process and final inspection by confirming specifications, conducting visual and measurement tests, communicating required adjustments to production supervisor/operator.Read technical drawings, control plans, and specifications to understand the requirements of products and services.Document inspection results by completing reports and logs, summarizes re-work and waste, and inputs data into quality database. Raising and signing release documents (CofC, Advice Notes, etc.)Keeps measurement equipment operating by following operating instructions and calibration requirements, and reporting to QA any faulty or out of calibration equipment.Communicating with the Quality/Engineering department about how to prevent similar defects in the future.Carry out such other reasonable duties within the business from time to time.Adhere to the company's health and safety requirements and complete training as required.Skills and Qualifications/experience: A minimum of 3-5 years experience in a similar role (preferred). Strong understanding of quality control/inspection standards and testing techniques/methods (use of micrometers, verniers, DTis, height gauges, shadowgraphs, CMM, etc.) (required). Strong understanding technical drawings and GD&T (required). RCCA knowledge (including 8D methodology) Good math and technical skills (required). Good knowledge of MS Office (preferred). General knowledge of gear metrology (preferred). FAIR/PPAP knowledge (preferred). Ability to work in fast paced environment/under pressure (required).
