MC Technical Recruitment Ltd
Edinburgh, Midlothian
Plant Manager Circa £45,000 Edinburgh MC Technical Recruitment is currently looking to recruit a Plant Manager on behalf of a UK-based anaerobic digestion (AD) operations and maintenance specialist, to be based at their site in Haddington. This role will involve taking full responsibility for the daily operation and maintenance of a biogas plant. This is a genuinely hands-on leadership role - you'll be the senior person on-site, managing a small operational team while staying close to the process itself, and reporting directly to senior management. The plant operates 24/7, so some out-of-hours and shift work will be required. As a Plant Manager, you will be responsible for: Managing and developing a small team of plant operators and technicians, fostering a culture of safety, teamwork, and continuous improvement Directing and supervising maintenance contractors on-site Running regular safety training to maintain compliance with health and safety regulations Acting as the senior on-site presence, available for hands-on operational work when required Monitoring and optimising process conditions to maximise biogas production and energy output while maintaining system integrity Coordinating maintenance activities, including mechanical repairs, to minimise downtime Overseeing inventory of equipment parts and supplies needed for ongoing plant operation and maintenance Developing and maintaining plant procedures, operating manuals, and site documentation Working with computer-controlled (SCADA) plant systems to manage day-to-day operations Other duties as required To be considered for this role you should have: A relevant technical qualification - ideally degree-level in chemical or mechanical engineering, or chemistry Experience managing or supervising process plant operations in a process industry or utility environment Strong mechanical knowledge to understand complex equipment systems and support troubleshooting Comfortable working with computer-controlled (SCADA) plant systems Strong relationship-building skills - with contractors, clients, and regulators alike Solid understanding of workplace Health & Safety and environmental regulations (further training provided) Direct experience in anaerobic digestion or biogas would be an advantage, though not essential - full training is given Experience with environmental compliance and regulatory liaison would also be beneficial This is an exciting opportunity to join a lean, hands-on operation with strong technical backing from a wider international group The offer: The package on offer for this role includes A salary up to £45,000 per annum depending on experience Pension Scheme Holidays Other benefits
Aug 21, 2026
Full time
Plant Manager Circa £45,000 Edinburgh MC Technical Recruitment is currently looking to recruit a Plant Manager on behalf of a UK-based anaerobic digestion (AD) operations and maintenance specialist, to be based at their site in Haddington. This role will involve taking full responsibility for the daily operation and maintenance of a biogas plant. This is a genuinely hands-on leadership role - you'll be the senior person on-site, managing a small operational team while staying close to the process itself, and reporting directly to senior management. The plant operates 24/7, so some out-of-hours and shift work will be required. As a Plant Manager, you will be responsible for: Managing and developing a small team of plant operators and technicians, fostering a culture of safety, teamwork, and continuous improvement Directing and supervising maintenance contractors on-site Running regular safety training to maintain compliance with health and safety regulations Acting as the senior on-site presence, available for hands-on operational work when required Monitoring and optimising process conditions to maximise biogas production and energy output while maintaining system integrity Coordinating maintenance activities, including mechanical repairs, to minimise downtime Overseeing inventory of equipment parts and supplies needed for ongoing plant operation and maintenance Developing and maintaining plant procedures, operating manuals, and site documentation Working with computer-controlled (SCADA) plant systems to manage day-to-day operations Other duties as required To be considered for this role you should have: A relevant technical qualification - ideally degree-level in chemical or mechanical engineering, or chemistry Experience managing or supervising process plant operations in a process industry or utility environment Strong mechanical knowledge to understand complex equipment systems and support troubleshooting Comfortable working with computer-controlled (SCADA) plant systems Strong relationship-building skills - with contractors, clients, and regulators alike Solid understanding of workplace Health & Safety and environmental regulations (further training provided) Direct experience in anaerobic digestion or biogas would be an advantage, though not essential - full training is given Experience with environmental compliance and regulatory liaison would also be beneficial This is an exciting opportunity to join a lean, hands-on operation with strong technical backing from a wider international group The offer: The package on offer for this role includes A salary up to £45,000 per annum depending on experience Pension Scheme Holidays Other benefits
Field Calibration Technician Are you experienced in instrumentation calibration and looking for a varied field and workshop-based role where you can work with process instrumentation across a wide range of customer sites? If you've also worked in the following roles, we'd also like to hear from you: Calibration Technician, Field Service Engineer, Calibration Engineer, Instrumentation Technician, Service Engineer, Field Technician, Instrument Technician, Process Instrumentation Technician SALARY: £32,000 - £40,000 per annum (depending on experience) + Car + Fuel Card + Benefits (see below) LOCATION: North West Region / Field Based with occasional trips covering the whole of England and the Continent JOB TYPE: Full-Time, Permanent WORKING HOURS: Full-Time, Permanent JOB OVERVIEW This is an excellent opportunity for a Field Calibration Technician to join a growing organisation providing calibration, service and repair support for sophisticated process instrumentation. As the Field Calibration Technician you will work across customer sites and workshop environments, carrying out field and workshop calibrations, preparing service reports and test certificates, and supporting clients across a range of industrial sectors. The Field Calibration Technician will need strong instrumentation calibration experience, excellent communication skills and the ability to build positive working relationships with customers while managing a varied workload. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the Field Calibration Technician include: Carry Out Calibration Work: Complete field and workshop calibrations on process instrumentation Service and Repair Equipment: Provide calibration service and repair support for process instrumentation Support Customer Sites: Work in the field across customer locations, with occasional travel across Great Britain and the Continent Prepare Documentation: Raise accurate service reports and test certificates following completed work Build Client Relationships: Develop positive working relationships with customers while representing the organisation professionally on site Balance Field and Workshop Work: Work across both field-based assignments and workshop or office-based activity CANDIDATE REQUIREMENTS ESSENTIAL Instrumentation calibration experience in one or more relevant sectors, such as chemical, life sciences, power, food, steel, water, wastewater, paper, oil and gas, or petrochemical Full driving licence Highly self-motivated with the ability to work on your own initiative and as part of a team Flexible approach to working activities Excellent verbal and written communication skills Confident, assertive and professional approach Ability to develop good working relationships with customers Good organisational skills Excellent punctuality and timekeeping DESIRABLE Ideally qualified to ONC / HNC level, preferably in Electronics or Instrumentation and Control Field-based or customer-facing experience CCNSG Card CompEx 1-4 / 1-6 Experience within process and/or petrochemical environments Electrical and controls knowledge Profibus knowledge UKAS knowledge BENEFITS Salary package of £32,000 - £40,000 per annum, depending on experience Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away Paid overnight allowance for every night spent working away Employee training and development opportunities Company events Free gym membership close to the HQ office Company pension package Total holiday package of 31 days Employer-sponsored office attire Employer-funded cash plan covering costs such as opticians, dentist, physiotherapy and more Free on-site parking with electric / plug-in charging points Christmas shutdown HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P15055 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Northwest Region. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency.
Aug 21, 2026
Full time
Field Calibration Technician Are you experienced in instrumentation calibration and looking for a varied field and workshop-based role where you can work with process instrumentation across a wide range of customer sites? If you've also worked in the following roles, we'd also like to hear from you: Calibration Technician, Field Service Engineer, Calibration Engineer, Instrumentation Technician, Service Engineer, Field Technician, Instrument Technician, Process Instrumentation Technician SALARY: £32,000 - £40,000 per annum (depending on experience) + Car + Fuel Card + Benefits (see below) LOCATION: North West Region / Field Based with occasional trips covering the whole of England and the Continent JOB TYPE: Full-Time, Permanent WORKING HOURS: Full-Time, Permanent JOB OVERVIEW This is an excellent opportunity for a Field Calibration Technician to join a growing organisation providing calibration, service and repair support for sophisticated process instrumentation. As the Field Calibration Technician you will work across customer sites and workshop environments, carrying out field and workshop calibrations, preparing service reports and test certificates, and supporting clients across a range of industrial sectors. The Field Calibration Technician will need strong instrumentation calibration experience, excellent communication skills and the ability to build positive working relationships with customers while managing a varied workload. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the Field Calibration Technician include: Carry Out Calibration Work: Complete field and workshop calibrations on process instrumentation Service and Repair Equipment: Provide calibration service and repair support for process instrumentation Support Customer Sites: Work in the field across customer locations, with occasional travel across Great Britain and the Continent Prepare Documentation: Raise accurate service reports and test certificates following completed work Build Client Relationships: Develop positive working relationships with customers while representing the organisation professionally on site Balance Field and Workshop Work: Work across both field-based assignments and workshop or office-based activity CANDIDATE REQUIREMENTS ESSENTIAL Instrumentation calibration experience in one or more relevant sectors, such as chemical, life sciences, power, food, steel, water, wastewater, paper, oil and gas, or petrochemical Full driving licence Highly self-motivated with the ability to work on your own initiative and as part of a team Flexible approach to working activities Excellent verbal and written communication skills Confident, assertive and professional approach Ability to develop good working relationships with customers Good organisational skills Excellent punctuality and timekeeping DESIRABLE Ideally qualified to ONC / HNC level, preferably in Electronics or Instrumentation and Control Field-based or customer-facing experience CCNSG Card CompEx 1-4 / 1-6 Experience within process and/or petrochemical environments Electrical and controls knowledge Profibus knowledge UKAS knowledge BENEFITS Salary package of £32,000 - £40,000 per annum, depending on experience Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away Paid overnight allowance for every night spent working away Employee training and development opportunities Company events Free gym membership close to the HQ office Company pension package Total holiday package of 31 days Employer-sponsored office attire Employer-funded cash plan covering costs such as opticians, dentist, physiotherapy and more Free on-site parking with electric / plug-in charging points Christmas shutdown HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P15055 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Northwest Region. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency.
CBSbutler Holdings Limited trading as CBSbutler
Towcester, Northamptonshire
Equipment Technician Location: Northamptonshire Salary: Up to 40,000 + 35% Shift Allowance + Excellent Benefits Shift Pattern: Continental - 2 Days / 2 Nights / 4 Off We are seeking an experienced Equipment Technician to join a highly advanced engineering and manufacturing facility, supporting the operation and maintenance of complex semiconductor production equipment. This is a hands-on role working with sophisticated electro-mechanical, vacuum, pneumatic, electrical and RF systems within a high-tech cleanroom environment. Key Responsibilities Diagnose, repair and maintain advanced manufacturing and process equipment. Provide rapid engineering response to minimise equipment downtime. Carry out planned and preventative maintenance to maximise equipment uptime and performance. Fault-find across electrical, electronic, mechanical, vacuum and pneumatic systems. Support equipment including lithography, etch, deposition and epitaxy systems. Work safely with specialist gases, chemicals and associated delivery and exhaust systems. Manage critical spare parts and support continuous improvement initiatives. Maintain accurate technical documentation, procedures and maintenance records. Work closely with Engineering, Manufacturing, Facilities and other technical teams. Skills & Experience Apprenticeship, HNC, HND or Degree in Electrical or Mechanical Engineering, or equivalent experience. Strong fault-finding and diagnostic skills across complex electro-mechanical systems. Experience within a high-tech, precision or safety-critical engineering environment. Ability to interpret technical drawings and documentation. Experience following detailed procedures, risk assessments and method statements. Strong communication, organisational and problem-solving skills. Candidates from semiconductor, aerospace, defence, automotive, pharmaceuticals, oil & gas, power generation or Armed Forces engineering backgrounds are encouraged to apply. Semiconductor or cleanroom experience is advantageous but not essential. Additional Information 40.3 hours per week. Continental shift pattern: 2 days, 2 nights, 4 days off . 12-hour shifts, including weekends and bank holidays. Cleanroom-based working environment. SCBA use required; training and relevant assessments provided. Forklift training can be provided. Due to the rural location, a full UK driving licence and access to your own transport are essential . This is an excellent opportunity to work with cutting-edge technology in a highly specialised engineering environment, with strong career development opportunities and an excellent benefits package.
Aug 20, 2026
Full time
Equipment Technician Location: Northamptonshire Salary: Up to 40,000 + 35% Shift Allowance + Excellent Benefits Shift Pattern: Continental - 2 Days / 2 Nights / 4 Off We are seeking an experienced Equipment Technician to join a highly advanced engineering and manufacturing facility, supporting the operation and maintenance of complex semiconductor production equipment. This is a hands-on role working with sophisticated electro-mechanical, vacuum, pneumatic, electrical and RF systems within a high-tech cleanroom environment. Key Responsibilities Diagnose, repair and maintain advanced manufacturing and process equipment. Provide rapid engineering response to minimise equipment downtime. Carry out planned and preventative maintenance to maximise equipment uptime and performance. Fault-find across electrical, electronic, mechanical, vacuum and pneumatic systems. Support equipment including lithography, etch, deposition and epitaxy systems. Work safely with specialist gases, chemicals and associated delivery and exhaust systems. Manage critical spare parts and support continuous improvement initiatives. Maintain accurate technical documentation, procedures and maintenance records. Work closely with Engineering, Manufacturing, Facilities and other technical teams. Skills & Experience Apprenticeship, HNC, HND or Degree in Electrical or Mechanical Engineering, or equivalent experience. Strong fault-finding and diagnostic skills across complex electro-mechanical systems. Experience within a high-tech, precision or safety-critical engineering environment. Ability to interpret technical drawings and documentation. Experience following detailed procedures, risk assessments and method statements. Strong communication, organisational and problem-solving skills. Candidates from semiconductor, aerospace, defence, automotive, pharmaceuticals, oil & gas, power generation or Armed Forces engineering backgrounds are encouraged to apply. Semiconductor or cleanroom experience is advantageous but not essential. Additional Information 40.3 hours per week. Continental shift pattern: 2 days, 2 nights, 4 days off . 12-hour shifts, including weekends and bank holidays. Cleanroom-based working environment. SCBA use required; training and relevant assessments provided. Forklift training can be provided. Due to the rural location, a full UK driving licence and access to your own transport are essential . This is an excellent opportunity to work with cutting-edge technology in a highly specialised engineering environment, with strong career development opportunities and an excellent benefits package.
Kent UK Liphook Way Allington Maidstone, ME160Q, GBR Kent UK Liphook Way Allington Maidstone, ME160Q, GBR We are looking to appoint a QC Technician III (Microbiology) to join the QC department on a full time basis. As part of a dedicated team, you will perform inspections, check testing and sampling procedures for product manufacturing processes. You will carry out packaging line, manufacturing inspections and sampling and testing of incoming components and raw materials to ensure that company standards are met. You may assist with validating or troubleshooting testing methods, including assays. To be a successful in this role, you will perform an array of microbiological environmental sampling, such as active air, passive air, surface bioburden and non-viable particulate monitoring. You will also perform microbiological sampling and testing of site utilities such as purified water, compressed gases and pure steam, along with microbial testing, including but not limited to bioburden assessment using filtration; detection of endotoxin; basic identification of microorganisms; media growth promotion, etc. You will work in a variety of business units, such as the QC Microbiology laboratory, production environments, and GMP cleanrooms. You will keep accurate and detailed records of all laboratory work in accordance with company procedures; completion of Good Manufacturing Practices (GMP) testing paperwork to a high specification in line with ALCOA (Attributable, Legible, Contemporaneous, Original and Accurate) expectations. You will ensure laboratory media, chemicals and consumables are stocked to prevent testing delays. You will ensure equipment, instruments, and facilities within the laboratory are calibrated, and kept serviceable. You will ensure all QC working practices are in compliance with the requirements of EudraLex v. 4, where required. The successful candidate will have education and / or experience in some, or all, of the following areas: 8 years relevant work experience or associate degree with 3-5 years relevant work experience or Bachelor's degree with 1-2 years relevant experience preferred Proficient in aseptic technique and experience of working in a QC Microbiology laboratory A degree of familiarity of sampling within production and cleanrooms Diligent and with a meticulous approach to all tasks, with a keen eye for detail Good IT skills e.g. Microsoft Office (Word, Excel and Outlook) Strong analytical and problem solving ability Good planning, organizational, and time management skills Experience in Kaizen/Lean/Sigma an asset About us: At Sekisui Diagnostics, we help improve patient outcomes by doing what we've always done - focusing on innovating and developing highly accurate diagnostics tests, reagents, and systems. In recent years, social and consumer needs for medical care have been diversifying in line with dramatic transformations in the global medical environment. We will continue to embrace change and challenge new frontiers so that we can create unique, high-quality products and services that will leave our customers truly satisfied. With worldwide state-of-the-art manufacturing facilities and an international sales and distribution network, we are a solid partner for healthcare professionals, distributors, and manufacturers around the world. Our global capabilities allow us to meet the specific needs of our wide range of customers - and customize solutions at both a regional and product level. As an equal opportunity employer, Sekisui Diagnostics is committed to a diverse workforce. Employment decisions will be made without discrimination based on race, color, religion, national origin, gender, age, sexual orientation, physical or mental disability, genetic information or characteristic, gender identity and expression, veteran status, other non-job-related characteristics, or other prohibited grounds specified in applicable country and local laws. It is also Sekisui Diagnostics policy to comply with all applicable country and local laws respecting consideration of unemployment status in making hiring decisions. Sekisui Diagnostics is pleased to consider all qualified applicants for open roles and only those candidates who are selected for further consideration or interviews will be contacted by a member of the Company's internal recruiting team.
Jul 31, 2026
Full time
Kent UK Liphook Way Allington Maidstone, ME160Q, GBR Kent UK Liphook Way Allington Maidstone, ME160Q, GBR We are looking to appoint a QC Technician III (Microbiology) to join the QC department on a full time basis. As part of a dedicated team, you will perform inspections, check testing and sampling procedures for product manufacturing processes. You will carry out packaging line, manufacturing inspections and sampling and testing of incoming components and raw materials to ensure that company standards are met. You may assist with validating or troubleshooting testing methods, including assays. To be a successful in this role, you will perform an array of microbiological environmental sampling, such as active air, passive air, surface bioburden and non-viable particulate monitoring. You will also perform microbiological sampling and testing of site utilities such as purified water, compressed gases and pure steam, along with microbial testing, including but not limited to bioburden assessment using filtration; detection of endotoxin; basic identification of microorganisms; media growth promotion, etc. You will work in a variety of business units, such as the QC Microbiology laboratory, production environments, and GMP cleanrooms. You will keep accurate and detailed records of all laboratory work in accordance with company procedures; completion of Good Manufacturing Practices (GMP) testing paperwork to a high specification in line with ALCOA (Attributable, Legible, Contemporaneous, Original and Accurate) expectations. You will ensure laboratory media, chemicals and consumables are stocked to prevent testing delays. You will ensure equipment, instruments, and facilities within the laboratory are calibrated, and kept serviceable. You will ensure all QC working practices are in compliance with the requirements of EudraLex v. 4, where required. The successful candidate will have education and / or experience in some, or all, of the following areas: 8 years relevant work experience or associate degree with 3-5 years relevant work experience or Bachelor's degree with 1-2 years relevant experience preferred Proficient in aseptic technique and experience of working in a QC Microbiology laboratory A degree of familiarity of sampling within production and cleanrooms Diligent and with a meticulous approach to all tasks, with a keen eye for detail Good IT skills e.g. Microsoft Office (Word, Excel and Outlook) Strong analytical and problem solving ability Good planning, organizational, and time management skills Experience in Kaizen/Lean/Sigma an asset About us: At Sekisui Diagnostics, we help improve patient outcomes by doing what we've always done - focusing on innovating and developing highly accurate diagnostics tests, reagents, and systems. In recent years, social and consumer needs for medical care have been diversifying in line with dramatic transformations in the global medical environment. We will continue to embrace change and challenge new frontiers so that we can create unique, high-quality products and services that will leave our customers truly satisfied. With worldwide state-of-the-art manufacturing facilities and an international sales and distribution network, we are a solid partner for healthcare professionals, distributors, and manufacturers around the world. Our global capabilities allow us to meet the specific needs of our wide range of customers - and customize solutions at both a regional and product level. As an equal opportunity employer, Sekisui Diagnostics is committed to a diverse workforce. Employment decisions will be made without discrimination based on race, color, religion, national origin, gender, age, sexual orientation, physical or mental disability, genetic information or characteristic, gender identity and expression, veteran status, other non-job-related characteristics, or other prohibited grounds specified in applicable country and local laws. It is also Sekisui Diagnostics policy to comply with all applicable country and local laws respecting consideration of unemployment status in making hiring decisions. Sekisui Diagnostics is pleased to consider all qualified applicants for open roles and only those candidates who are selected for further consideration or interviews will be contacted by a member of the Company's internal recruiting team.
Electrician / Electrical Inspector (CompEx) Excellent opportunity for an Electrician / Electrical Inspector (CompEx) carrying out ATEX inspections, electrical installation, fault finding, electrical rectifications and EC&I work across oil & gas, pharmaceutical, chemical, manufacturing and process industry environments. If you've also worked in the following roles, we'd also like to hear from you: ATEX Inspector, Field Service Engineer, Hazardous Area Electrician, Instrumentation Technician, Electrical Technician, CompEx Inspector, CompEx Electrician, Hazardous Area Inspector, EC&I Technician, EC&I Engineer SALARY: Up to £55,000 per annum (dependent on qualifications and experience) + Car + Benefits LOCATION: Field based across the North West. However, candidates based within the M60 would be favourable due to the client base. JOB TYPE: Full-Time, Permanent JOB OVERVIEW The company continues to expand its Field Service Team, creating an exciting opportunity for a CompEx Electrical Inspector / Electrician to join a forward-thinking organisation delivering specialist EC&I and engineering solutions to customers across multiple process industries. As a CompEx Electrical Inspector / Electrician you will conduct hazardous area inspections, complete ATEX assessments, undertake electrical installation work, fault finding and electrical rectifications, and support instrumentation activities across aerospace, food, beverage, pharmaceutical, chemical and oil & gas sectors. You will work with containment systems, cable installations, electrical wiring diagrams and area classification reports to ensure compliance and operational safety. The CompEx Electrical Inspector / Electrician will play an important role in delivering inspection services in accordance with IEC / BS EN 60079 standards while helping improve reliability, minimise downtime and maintain safe customer operations across the UK and EU. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the CompEx Electrical Inspector / Electrician include: ATEX Inspections: conduct detailed ATEX and CompEx inspections to IEC / BS EN 60079-17 standards Electrical Inspection: identify non-compliances and ensure hazardous area equipment meets required standards Electrical Rectifications: complete high-quality electrical repairs and corrective work to minimise downtime Inspection Reporting: produce accurate reports and communicate findings and risks clearly Documentation Preparation: create comprehensive handover documentation following site inspections Containment Installation: install containment and cable systems to a high standard Electrical Installation: undertake electrical installation work safely and efficiently Technical Interpretation: work from electrical wiring diagrams and area classification reports Instrumentation Support: support instrumentation installation and shutdown projects when required Project Delivery: manage work schedules effectively and deliver work within agreed timescales Continuous Improvement: identify recurring issues and contribute to improved inspection processes Client Relationships: collaborate with customers and internal teams to improve compliance and safety outcomes CANDIDATE REQUIREMENTS ESSENTIAL Current CompEx EX01-04 qualification C&G 2391, 2391-52, or 2394 and 2395 qualification JIB Gold Card or higher with recognised apprenticeship or equivalent Electrician qualification Strong understanding of BS EN 60079-14 and BS EN 60079-17 Proven experience conducting ATEX inspections and producing high-quality reports Experience with glanding, terminating, containment installation and cable systems Proficient in interpreting electrical wiring diagrams and area classification reports Competent using Microsoft Excel, SharePoint and Microsoft 365 Willing to travel throughout the UK and EU including overnight stays Full UK driving licence required Able to develop effective customer relationships and communicate clearly DESIRABLE CompEx EX05-06 qualification Valid CCSNG, JIB or equivalent accreditation Previous experience within a service or field-based engineering environment BENEFITS A base salary of up to £55k dependent on qualifications and experience Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away - zero out of pocket expenses here! Paid overnight allowance, every night you spend working away Employee Training Company Events Modern open plan office Free Gym membership within walking distance to HQ Company pension package to secure your future Total holiday package of 31 days Employer-sponsored office attire Employer funded Cash plan. Reimbursement for going to the opticians, dentist, physiotherapists and more! HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14715 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Manchester, Greater Manchester, North West England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online
May 22, 2026
Full time
Electrician / Electrical Inspector (CompEx) Excellent opportunity for an Electrician / Electrical Inspector (CompEx) carrying out ATEX inspections, electrical installation, fault finding, electrical rectifications and EC&I work across oil & gas, pharmaceutical, chemical, manufacturing and process industry environments. If you've also worked in the following roles, we'd also like to hear from you: ATEX Inspector, Field Service Engineer, Hazardous Area Electrician, Instrumentation Technician, Electrical Technician, CompEx Inspector, CompEx Electrician, Hazardous Area Inspector, EC&I Technician, EC&I Engineer SALARY: Up to £55,000 per annum (dependent on qualifications and experience) + Car + Benefits LOCATION: Field based across the North West. However, candidates based within the M60 would be favourable due to the client base. JOB TYPE: Full-Time, Permanent JOB OVERVIEW The company continues to expand its Field Service Team, creating an exciting opportunity for a CompEx Electrical Inspector / Electrician to join a forward-thinking organisation delivering specialist EC&I and engineering solutions to customers across multiple process industries. As a CompEx Electrical Inspector / Electrician you will conduct hazardous area inspections, complete ATEX assessments, undertake electrical installation work, fault finding and electrical rectifications, and support instrumentation activities across aerospace, food, beverage, pharmaceutical, chemical and oil & gas sectors. You will work with containment systems, cable installations, electrical wiring diagrams and area classification reports to ensure compliance and operational safety. The CompEx Electrical Inspector / Electrician will play an important role in delivering inspection services in accordance with IEC / BS EN 60079 standards while helping improve reliability, minimise downtime and maintain safe customer operations across the UK and EU. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the CompEx Electrical Inspector / Electrician include: ATEX Inspections: conduct detailed ATEX and CompEx inspections to IEC / BS EN 60079-17 standards Electrical Inspection: identify non-compliances and ensure hazardous area equipment meets required standards Electrical Rectifications: complete high-quality electrical repairs and corrective work to minimise downtime Inspection Reporting: produce accurate reports and communicate findings and risks clearly Documentation Preparation: create comprehensive handover documentation following site inspections Containment Installation: install containment and cable systems to a high standard Electrical Installation: undertake electrical installation work safely and efficiently Technical Interpretation: work from electrical wiring diagrams and area classification reports Instrumentation Support: support instrumentation installation and shutdown projects when required Project Delivery: manage work schedules effectively and deliver work within agreed timescales Continuous Improvement: identify recurring issues and contribute to improved inspection processes Client Relationships: collaborate with customers and internal teams to improve compliance and safety outcomes CANDIDATE REQUIREMENTS ESSENTIAL Current CompEx EX01-04 qualification C&G 2391, 2391-52, or 2394 and 2395 qualification JIB Gold Card or higher with recognised apprenticeship or equivalent Electrician qualification Strong understanding of BS EN 60079-14 and BS EN 60079-17 Proven experience conducting ATEX inspections and producing high-quality reports Experience with glanding, terminating, containment installation and cable systems Proficient in interpreting electrical wiring diagrams and area classification reports Competent using Microsoft Excel, SharePoint and Microsoft 365 Willing to travel throughout the UK and EU including overnight stays Full UK driving licence required Able to develop effective customer relationships and communicate clearly DESIRABLE CompEx EX05-06 qualification Valid CCSNG, JIB or equivalent accreditation Previous experience within a service or field-based engineering environment BENEFITS A base salary of up to £55k dependent on qualifications and experience Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away - zero out of pocket expenses here! Paid overnight allowance, every night you spend working away Employee Training Company Events Modern open plan office Free Gym membership within walking distance to HQ Company pension package to secure your future Total holiday package of 31 days Employer-sponsored office attire Employer funded Cash plan. Reimbursement for going to the opticians, dentist, physiotherapists and more! HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14715 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Manchester, Greater Manchester, North West England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online
Instrumentation Calibration Engineer / Field Service Technician A fantastic opportunity for an instrumentation, calibration and field service professional to support sophisticated process instrumentation across industrial customer sites throughout the UK. If you've also worked in the following roles, we'd also like to hear from you: EC&I Engineer, Calibration Technician, Controls Technician, Instrumentation Engineer, Service Engineer, Field Service Engineer, Instrumentation Calibration Technician SALARY: £32,000 to £40,000 per annum + Benefits LOCATION: Field based across the North West. However, candidates based within an hour commute from Macclesfield would be favourable due to the client base JOB TYPE: Full-Time, Permanent JOB OVERVIEW Due to continued growth, we have a fantastic new job opportunity for an Instrumentation Calibration Engineer / Field Service Technician to join a market-leading organisation providing calibration and process instrumentation services across multiple industrial sectors. As the Instrumentation Calibration Engineer / Field Service Technician you will carry out calibration, service, repair and fault finding on sophisticated process instrumentation within chemical, power, food, water, wastewater, manufacturing, life sciences and petrochemical environments. The Instrumentation Calibration Engineer / Field Service Technician will support UKAS-related calibration activities, build strong customer relationships on site, complete technical reports and test certificates, and work across field, workshop and office environments throughout the UK and occasionally Europe. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the Instrumentation Calibration Engineer / Field Service Technician include: Field Service Support: provide calibration, maintenance and instrumentation support across customer sites throughout the UK Calibration Activities: carry out field and workshop calibration of process instrumentation equipment Instrumentation Repair: complete service, repair and fault-finding activities on sophisticated instrumentation systems Technical Documentation: raise service reports, calibration records and test certificates Customer Relationships: develop and maintain strong working relationships with clients on site Workshop Support: assist with workshop and office-based technical activities Travel: support occasional travel across Great Britain and Continental Europe Team Collaboration: work independently and collaboratively within the field service team CANDIDATE REQUIREMENTS ESSENTIAL Previous experience in instrumentation calibration within chemical, life sciences, power, food, steel, water, wastewater, paper, oil and gas or petrochemical sectors Full UK driving licence required Highly self-motivated with the ability to work independently and as part of a team Excellent verbal and written communication skills Ability to develop positive customer relationships within industrial environments Strong organisational skills with excellent punctuality and timekeeping Adaptable and flexible approach to work activities and travel requirements Confident, proactive and professional approach to field service work DESIRABLE Previous customer-facing or field service experience Safety Certification: CCNSG Card Hazardous Area Knowledge: CompEx 1-4 / 1-6 Experience working within process and/or petrochemical environments Electrical and controls knowledge Profibus knowledge Understanding of UKAS calibration standards and procedures ONC / HNC qualification in Electronics, Instrumentation and Control or a related discipline BENEFITS A salary package of £32,000-£40,000 per annum (dependant on experience) Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away - zero out of pocket expenses! Paid overnight allowance, every night you spend working away Employee Training - Opportunities to grow and develop Company Events - Because they love celebrating victories Free Gym membership close to the HQ Office Company pension package to secure your future Total holiday package of 31 days to fully rest and recharge Employer-sponsored office attire - elevate your professional look Employer funded Cash plan. They'll reimburse you for going to the opticians, dentist, physiotherapists and more! Free on-site parking with electric/plug-in charging points Christmas shutdown HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14697 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Macclesfield, Cheshire, North West England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online
May 22, 2026
Full time
Instrumentation Calibration Engineer / Field Service Technician A fantastic opportunity for an instrumentation, calibration and field service professional to support sophisticated process instrumentation across industrial customer sites throughout the UK. If you've also worked in the following roles, we'd also like to hear from you: EC&I Engineer, Calibration Technician, Controls Technician, Instrumentation Engineer, Service Engineer, Field Service Engineer, Instrumentation Calibration Technician SALARY: £32,000 to £40,000 per annum + Benefits LOCATION: Field based across the North West. However, candidates based within an hour commute from Macclesfield would be favourable due to the client base JOB TYPE: Full-Time, Permanent JOB OVERVIEW Due to continued growth, we have a fantastic new job opportunity for an Instrumentation Calibration Engineer / Field Service Technician to join a market-leading organisation providing calibration and process instrumentation services across multiple industrial sectors. As the Instrumentation Calibration Engineer / Field Service Technician you will carry out calibration, service, repair and fault finding on sophisticated process instrumentation within chemical, power, food, water, wastewater, manufacturing, life sciences and petrochemical environments. The Instrumentation Calibration Engineer / Field Service Technician will support UKAS-related calibration activities, build strong customer relationships on site, complete technical reports and test certificates, and work across field, workshop and office environments throughout the UK and occasionally Europe. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the Instrumentation Calibration Engineer / Field Service Technician include: Field Service Support: provide calibration, maintenance and instrumentation support across customer sites throughout the UK Calibration Activities: carry out field and workshop calibration of process instrumentation equipment Instrumentation Repair: complete service, repair and fault-finding activities on sophisticated instrumentation systems Technical Documentation: raise service reports, calibration records and test certificates Customer Relationships: develop and maintain strong working relationships with clients on site Workshop Support: assist with workshop and office-based technical activities Travel: support occasional travel across Great Britain and Continental Europe Team Collaboration: work independently and collaboratively within the field service team CANDIDATE REQUIREMENTS ESSENTIAL Previous experience in instrumentation calibration within chemical, life sciences, power, food, steel, water, wastewater, paper, oil and gas or petrochemical sectors Full UK driving licence required Highly self-motivated with the ability to work independently and as part of a team Excellent verbal and written communication skills Ability to develop positive customer relationships within industrial environments Strong organisational skills with excellent punctuality and timekeeping Adaptable and flexible approach to work activities and travel requirements Confident, proactive and professional approach to field service work DESIRABLE Previous customer-facing or field service experience Safety Certification: CCNSG Card Hazardous Area Knowledge: CompEx 1-4 / 1-6 Experience working within process and/or petrochemical environments Electrical and controls knowledge Profibus knowledge Understanding of UKAS calibration standards and procedures ONC / HNC qualification in Electronics, Instrumentation and Control or a related discipline BENEFITS A salary package of £32,000-£40,000 per annum (dependant on experience) Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away - zero out of pocket expenses! Paid overnight allowance, every night you spend working away Employee Training - Opportunities to grow and develop Company Events - Because they love celebrating victories Free Gym membership close to the HQ Office Company pension package to secure your future Total holiday package of 31 days to fully rest and recharge Employer-sponsored office attire - elevate your professional look Employer funded Cash plan. They'll reimburse you for going to the opticians, dentist, physiotherapists and more! Free on-site parking with electric/plug-in charging points Christmas shutdown HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14697 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Macclesfield, Cheshire, North West England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online
Instrumentation Calibration Engineer / Field Service Technician A fantastic opportunity for an instrumentation, calibration and field service professional to support sophisticated process instrumentation across industrial customer sites throughout the UK. If you've also worked in the following roles, we'd also like to hear from you: EC&I Engineer, Calibration Technician, Controls Technician, Instrumentation Engineer, Service Engineer, Field Service Engineer, Instrumentation Calibration Technician SALARY: £32,000 to £42,000 per annum + Benefits LOCATION: Field based across South England and candidates can be based in Surrey, Hampshire, Berkshire or surrounding Counties. JOB TYPE: Full-Time, Permanent JOB OVERVIEW Due to continued growth, we have a fantastic new job opportunity for an Instrumentation Calibration Engineer / Field Service Technician to join a market-leading organisation providing calibration and process instrumentation services across multiple industrial sectors. As the Instrumentation Calibration Engineer / Field Service Technician you will carry out calibration, service, repair and fault finding on sophisticated process instrumentation within chemical, power, food, water, wastewater, manufacturing, life sciences and petrochemical environments. The Instrumentation Calibration Engineer / Field Service Technician will support UKAS-related calibration activities, build strong customer relationships on site, complete technical reports and test certificates, and work across field, workshop and office environments throughout the UK and occasionally Europe. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the Instrumentation Calibration Engineer / Field Service Technician include: Field Service Support: provide calibration, maintenance and instrumentation support across customer sites throughout the UK Calibration Activities: carry out field and workshop calibration of process instrumentation equipment Instrumentation Repair: complete service, repair and fault-finding activities on sophisticated instrumentation systems Technical Documentation: raise service reports, calibration records and test certificates Customer Relationships: develop and maintain strong working relationships with clients on site Workshop Support: assist with workshop and office-based technical activities Travel: support occasional travel across Great Britain and Continental Europe Team Collaboration: work independently and collaboratively within the field service team CANDIDATE REQUIREMENTS ESSENTIAL Previous experience in instrumentation calibration within chemical, life sciences, power, food, steel, water, wastewater, paper, oil and gas or petrochemical sectors Full UK driving licence required Highly self-motivated with the ability to work independently and as part of a team Excellent verbal and written communication skills Ability to develop positive customer relationships within industrial environments Strong organisational skills with excellent punctuality and timekeeping Adaptable and flexible approach to work activities and travel requirements Confident, proactive and professional approach to field service work DESIRABLE Previous customer-facing or field service experience Safety Certification: CCNSG Card Hazardous Area Knowledge: CompEx 1-4 / 1-6 Experience working within process and/or petrochemical environments Electrical and controls knowledge Profibus knowledge Understanding of UKAS calibration standards and procedures ONC / HNC qualification in Electronics, Instrumentation and Control or a related discipline BENEFITS A salary package of £32,000-£42,000 per annum (dependant on experience) Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away - zero out of pocket expenses! Paid overnight allowance, every night you spend working away Employee Training - Opportunities to grow and develop Company Events - Because they love celebrating victories Free Gym membership close to the HQ Office Company pension package to secure your future Total holiday package of 31 days to fully rest and recharge Employer-sponsored office attire - elevate your professional look Employer funded Cash plan. They'll reimburse you for going to the opticians, dentist, physiotherapists and more! Free on-site parking with electric/plug-in charging points Christmas shutdown HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14701 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in South / South East England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online
May 22, 2026
Full time
Instrumentation Calibration Engineer / Field Service Technician A fantastic opportunity for an instrumentation, calibration and field service professional to support sophisticated process instrumentation across industrial customer sites throughout the UK. If you've also worked in the following roles, we'd also like to hear from you: EC&I Engineer, Calibration Technician, Controls Technician, Instrumentation Engineer, Service Engineer, Field Service Engineer, Instrumentation Calibration Technician SALARY: £32,000 to £42,000 per annum + Benefits LOCATION: Field based across South England and candidates can be based in Surrey, Hampshire, Berkshire or surrounding Counties. JOB TYPE: Full-Time, Permanent JOB OVERVIEW Due to continued growth, we have a fantastic new job opportunity for an Instrumentation Calibration Engineer / Field Service Technician to join a market-leading organisation providing calibration and process instrumentation services across multiple industrial sectors. As the Instrumentation Calibration Engineer / Field Service Technician you will carry out calibration, service, repair and fault finding on sophisticated process instrumentation within chemical, power, food, water, wastewater, manufacturing, life sciences and petrochemical environments. The Instrumentation Calibration Engineer / Field Service Technician will support UKAS-related calibration activities, build strong customer relationships on site, complete technical reports and test certificates, and work across field, workshop and office environments throughout the UK and occasionally Europe. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the Instrumentation Calibration Engineer / Field Service Technician include: Field Service Support: provide calibration, maintenance and instrumentation support across customer sites throughout the UK Calibration Activities: carry out field and workshop calibration of process instrumentation equipment Instrumentation Repair: complete service, repair and fault-finding activities on sophisticated instrumentation systems Technical Documentation: raise service reports, calibration records and test certificates Customer Relationships: develop and maintain strong working relationships with clients on site Workshop Support: assist with workshop and office-based technical activities Travel: support occasional travel across Great Britain and Continental Europe Team Collaboration: work independently and collaboratively within the field service team CANDIDATE REQUIREMENTS ESSENTIAL Previous experience in instrumentation calibration within chemical, life sciences, power, food, steel, water, wastewater, paper, oil and gas or petrochemical sectors Full UK driving licence required Highly self-motivated with the ability to work independently and as part of a team Excellent verbal and written communication skills Ability to develop positive customer relationships within industrial environments Strong organisational skills with excellent punctuality and timekeeping Adaptable and flexible approach to work activities and travel requirements Confident, proactive and professional approach to field service work DESIRABLE Previous customer-facing or field service experience Safety Certification: CCNSG Card Hazardous Area Knowledge: CompEx 1-4 / 1-6 Experience working within process and/or petrochemical environments Electrical and controls knowledge Profibus knowledge Understanding of UKAS calibration standards and procedures ONC / HNC qualification in Electronics, Instrumentation and Control or a related discipline BENEFITS A salary package of £32,000-£42,000 per annum (dependant on experience) Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away - zero out of pocket expenses! Paid overnight allowance, every night you spend working away Employee Training - Opportunities to grow and develop Company Events - Because they love celebrating victories Free Gym membership close to the HQ Office Company pension package to secure your future Total holiday package of 31 days to fully rest and recharge Employer-sponsored office attire - elevate your professional look Employer funded Cash plan. They'll reimburse you for going to the opticians, dentist, physiotherapists and more! Free on-site parking with electric/plug-in charging points Christmas shutdown HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14701 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in South / South East England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online
Role: Quality Technician Location: Knutsford, Parkgate Industrial Estate Working Hours: Mon-Fri, 8:30am till 5pm. 40 hours per week (Office Based) We are looking for a highly skilled and experienced Quality Technician to join our manufacturing team in Knutsford. This is an exciting time to join the fastest growing and most successful family-owned valve manufacturer in the UK. About Us With over 45 years of valve technology innovations, Oliver Valves is a global leader in the design, manufacture, and supply of high-quality valves and valve systems, serving industries such as oil and gas, petrochemical, and other critical sectors. We have won recognised awards for Export, Manufacturing and Growth - as well as the coveted Queens Award and more recently Kings Award for Industry. We're a profitable, privately owned, and fast-moving company looking for talented individuals to join our team and deliver our strategic objectives. What You'll Be Doing Resolve material certification issues identified by the certificate checking team with Suppliers/Stockist/Test House/Mill in a timely manner. This could be missing, or incorrect, information and poor-quality copies. Liaise with the Engineering and Quality departments for further guidance relating to certification queries. Advise/assist suppliers on material certificates and specifications, providing training where necessary. Conduct witness testing of products at test houses, ensuring that they comply with the relevant company and customer specific quality standards. Identifying areas for improvement and contributing to the development of quality policies. Conduct internal quality management system audits and product and process audits. Support the receipt, recording, investigation and analysis of customer returned products (e.g. CAR's & 8D's). Support the Supplier Development Engineer with the management of the supply chain, including performance review visits, supplier audits and raising and monitoring corrective action reports (CAR's) where required. Create and maintain company quality documentation, such as procedures, work instructions, quality alerts and forms. Investigate instances of product and process failure and conduct effective root cause analysis- implement robust corrective actions with proven problem-solving techniques such as 8D and 5Y. What You'll Bring Knowledge of quality testing methods Proficient in Microsoft Office GCSE min Grade 4 or equivalent in Maths and English Experience in interpreting engineering material standards Familiarity with relevant standards such as ISO 9001, API Familiarity with quality methodologies Reliability and a detail-oriented approach. Be a pro-active team player with a positive attitude and willingness to learn. Have good numeracy, literacy and communication skills. What's On Offer? A competitive salary. Access to an Employee Assistance Programme, offering free and confidential support. A company pension scheme to help you plan for the future. Medical cash plan benefits, covering essential healthcare costs such as dental treatment, check-ups, optical care, physiotherapy, and more. Training opportunities to support your career development. Long service awards, recognising your continued commitment. Increased annual leave based on length of service. ?Hours of work are 40 hours over Monday to Friday, 8:30am till 5pm.
May 18, 2026
Full time
Role: Quality Technician Location: Knutsford, Parkgate Industrial Estate Working Hours: Mon-Fri, 8:30am till 5pm. 40 hours per week (Office Based) We are looking for a highly skilled and experienced Quality Technician to join our manufacturing team in Knutsford. This is an exciting time to join the fastest growing and most successful family-owned valve manufacturer in the UK. About Us With over 45 years of valve technology innovations, Oliver Valves is a global leader in the design, manufacture, and supply of high-quality valves and valve systems, serving industries such as oil and gas, petrochemical, and other critical sectors. We have won recognised awards for Export, Manufacturing and Growth - as well as the coveted Queens Award and more recently Kings Award for Industry. We're a profitable, privately owned, and fast-moving company looking for talented individuals to join our team and deliver our strategic objectives. What You'll Be Doing Resolve material certification issues identified by the certificate checking team with Suppliers/Stockist/Test House/Mill in a timely manner. This could be missing, or incorrect, information and poor-quality copies. Liaise with the Engineering and Quality departments for further guidance relating to certification queries. Advise/assist suppliers on material certificates and specifications, providing training where necessary. Conduct witness testing of products at test houses, ensuring that they comply with the relevant company and customer specific quality standards. Identifying areas for improvement and contributing to the development of quality policies. Conduct internal quality management system audits and product and process audits. Support the receipt, recording, investigation and analysis of customer returned products (e.g. CAR's & 8D's). Support the Supplier Development Engineer with the management of the supply chain, including performance review visits, supplier audits and raising and monitoring corrective action reports (CAR's) where required. Create and maintain company quality documentation, such as procedures, work instructions, quality alerts and forms. Investigate instances of product and process failure and conduct effective root cause analysis- implement robust corrective actions with proven problem-solving techniques such as 8D and 5Y. What You'll Bring Knowledge of quality testing methods Proficient in Microsoft Office GCSE min Grade 4 or equivalent in Maths and English Experience in interpreting engineering material standards Familiarity with relevant standards such as ISO 9001, API Familiarity with quality methodologies Reliability and a detail-oriented approach. Be a pro-active team player with a positive attitude and willingness to learn. Have good numeracy, literacy and communication skills. What's On Offer? A competitive salary. Access to an Employee Assistance Programme, offering free and confidential support. A company pension scheme to help you plan for the future. Medical cash plan benefits, covering essential healthcare costs such as dental treatment, check-ups, optical care, physiotherapy, and more. Training opportunities to support your career development. Long service awards, recognising your continued commitment. Increased annual leave based on length of service. ?Hours of work are 40 hours over Monday to Friday, 8:30am till 5pm.
Instrumentation Calibration Engineer / Field Service Technician A fantastic opportunity for an instrumentation, calibration and field service professional to support sophisticated process instrumentation across industrial customer sites throughout the UK. If you've also worked in the following roles, we'd also like to hear from you: EC&I Engineer, Calibration Technician, Controls Technician, Instrumentation Engineer, Service Engineer, Field Service Engineer, Instrumentation Calibration Technician SALARY: £32,000 to £40,000 per annum + Benefits LOCATION: Field based across the North West. However, candidates based within an hour commute from Macclesfield would be favourable due to the client base JOB TYPE: Full-Time, Permanent JOB OVERVIEW Due to continued growth, we have a fantastic new job opportunity for an Instrumentation Calibration Engineer / Field Service Technician to join a market-leading organisation providing calibration and process instrumentation services across multiple industrial sectors. As the Instrumentation Calibration Engineer / Field Service Technician you will carry out calibration, service, repair and fault finding on sophisticated process instrumentation within chemical, power, food, water, wastewater, manufacturing, life sciences and petrochemical environments. The Instrumentation Calibration Engineer / Field Service Technician will support UKAS-related calibration activities, build strong customer relationships on site, complete technical reports and test certificates, and work across field, workshop and office environments throughout the UK and occasionally Europe. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the Instrumentation Calibration Engineer / Field Service Technician include: Field Service Support: provide calibration, maintenance and instrumentation support across customer sites throughout the UK Calibration Activities: carry out field and workshop calibration of process instrumentation equipment Instrumentation Repair: complete service, repair and fault-finding activities on sophisticated instrumentation systems Technical Documentation: raise service reports, calibration records and test certificates Customer Relationships: develop and maintain strong working relationships with clients on site Workshop Support: assist with workshop and office-based technical activities Travel: support occasional travel across Great Britain and Continental Europe Team Collaboration: work independently and collaboratively within the field service team CANDIDATE REQUIREMENTS ESSENTIAL Previous experience in instrumentation calibration within chemical, life sciences, power, food, steel, water, wastewater, paper, oil and gas or petrochemical sectors Full UK driving licence required Highly self-motivated with the ability to work independently and as part of a team Excellent verbal and written communication skills Ability to develop positive customer relationships within industrial environments Strong organisational skills with excellent punctuality and timekeeping Adaptable and flexible approach to work activities and travel requirements Confident, proactive and professional approach to field service work DESIRABLE Previous customer-facing or field service experience Safety Certification: CCNSG Card Hazardous Area Knowledge: CompEx 1-4 / 1-6 Experience working within process and/or petrochemical environments Electrical and controls knowledge Profibus knowledge Understanding of UKAS calibration standards and procedures ONC / HNC qualification in Electronics, Instrumentation and Control or a related discipline BENEFITS A salary package of £32,000-£40,000 per annum (dependant on experience) Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away - zero out of pocket expenses! Paid overnight allowance, every night you spend working away Employee Training - Opportunities to grow and develop Company Events - Because they love celebrating victories Free Gym membership close to the HQ Office Company pension package to secure your future Total holiday package of 31 days to fully rest and recharge Employer-sponsored office attire - elevate your professional look Employer funded Cash plan. They'll reimburse you for going to the opticians, dentist, physiotherapists and more! Free on-site parking with electric/plug-in charging points Christmas shutdown HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14697 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Macclesfield, Cheshire, North West England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. AWD-IN-SPJ
May 14, 2026
Full time
Instrumentation Calibration Engineer / Field Service Technician A fantastic opportunity for an instrumentation, calibration and field service professional to support sophisticated process instrumentation across industrial customer sites throughout the UK. If you've also worked in the following roles, we'd also like to hear from you: EC&I Engineer, Calibration Technician, Controls Technician, Instrumentation Engineer, Service Engineer, Field Service Engineer, Instrumentation Calibration Technician SALARY: £32,000 to £40,000 per annum + Benefits LOCATION: Field based across the North West. However, candidates based within an hour commute from Macclesfield would be favourable due to the client base JOB TYPE: Full-Time, Permanent JOB OVERVIEW Due to continued growth, we have a fantastic new job opportunity for an Instrumentation Calibration Engineer / Field Service Technician to join a market-leading organisation providing calibration and process instrumentation services across multiple industrial sectors. As the Instrumentation Calibration Engineer / Field Service Technician you will carry out calibration, service, repair and fault finding on sophisticated process instrumentation within chemical, power, food, water, wastewater, manufacturing, life sciences and petrochemical environments. The Instrumentation Calibration Engineer / Field Service Technician will support UKAS-related calibration activities, build strong customer relationships on site, complete technical reports and test certificates, and work across field, workshop and office environments throughout the UK and occasionally Europe. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the Instrumentation Calibration Engineer / Field Service Technician include: Field Service Support: provide calibration, maintenance and instrumentation support across customer sites throughout the UK Calibration Activities: carry out field and workshop calibration of process instrumentation equipment Instrumentation Repair: complete service, repair and fault-finding activities on sophisticated instrumentation systems Technical Documentation: raise service reports, calibration records and test certificates Customer Relationships: develop and maintain strong working relationships with clients on site Workshop Support: assist with workshop and office-based technical activities Travel: support occasional travel across Great Britain and Continental Europe Team Collaboration: work independently and collaboratively within the field service team CANDIDATE REQUIREMENTS ESSENTIAL Previous experience in instrumentation calibration within chemical, life sciences, power, food, steel, water, wastewater, paper, oil and gas or petrochemical sectors Full UK driving licence required Highly self-motivated with the ability to work independently and as part of a team Excellent verbal and written communication skills Ability to develop positive customer relationships within industrial environments Strong organisational skills with excellent punctuality and timekeeping Adaptable and flexible approach to work activities and travel requirements Confident, proactive and professional approach to field service work DESIRABLE Previous customer-facing or field service experience Safety Certification: CCNSG Card Hazardous Area Knowledge: CompEx 1-4 / 1-6 Experience working within process and/or petrochemical environments Electrical and controls knowledge Profibus knowledge Understanding of UKAS calibration standards and procedures ONC / HNC qualification in Electronics, Instrumentation and Control or a related discipline BENEFITS A salary package of £32,000-£40,000 per annum (dependant on experience) Fully funded car and tech Fuel card, including allowances for breakfast, lunch and dinner when working away - zero out of pocket expenses! Paid overnight allowance, every night you spend working away Employee Training - Opportunities to grow and develop Company Events - Because they love celebrating victories Free Gym membership close to the HQ Office Company pension package to secure your future Total holiday package of 31 days to fully rest and recharge Employer-sponsored office attire - elevate your professional look Employer funded Cash plan. They'll reimburse you for going to the opticians, dentist, physiotherapists and more! Free on-site parking with electric/plug-in charging points Christmas shutdown HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14697 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Macclesfield, Cheshire, North West England. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. AWD-IN-SPJ
Job title: Mechanical Technician (Shift-Based Role) Location: Royston, UK (on-site) 2 positions open for day's shift - Salary £44,113 + 20% shift allowance - lunch allowance £396.25 = £53,331.85 + benefits 1 position open for 24/7 shift - Salary £44,113 + 35% shift allowance - lunch allowance £792.50 = £60,345.05 + benefits World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! You'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. As a mechanical Technician, you will join an established Mechanical Team within our top tier COMAH site, this role requires an experienced Industrial Mechanically biased maintenance technician who is able to demonstrate and execute a wide range of practical Mechanical skills, ranging from basic workshop skills including fabrication of pipework, steelwork, and plastics to working out on plant in a methodical & logical manner such that reactive faults can be identified and repaired safely, alongside working proactively by working on Planned maintenance & Routines scheduled by our Maintenance planner. As a Mechanical Technician, you will help drive our goals by: Responsible for the delivery of preventative/proactive maintenance of Mechanical systems and its sub or support systems Attending to any reactive/corrective maintenance that arises Fault finding, completing any repairs/replacements/calibration or set-up, installation of new systems/equipment, commissioning alongside operations on returning to service Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with. Key skills that will help you succeed in this role: Previous Manufacturing/Chemical industry experience Knowledge and experience of site services, Gas, Compressed air, Steam, cooling water and how to deenergise and work on safely. Knowledge and use of technical drawings & operator manuals alongside Mechanical exploded view/cross sectional drawings & P&ID's to aid fault diagnosis process. Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and offer benefits that support our employees' financial and physical wellbeing, such as: Competitive Retirement savings Company-matched Share Incentive Plan Life Assurance, Income Protection and Critical Illness Medical Plans/Health Assessments Retailer and Wellbeing Discounts Competitive Annual Incentive Plan Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
May 12, 2026
Full time
Job title: Mechanical Technician (Shift-Based Role) Location: Royston, UK (on-site) 2 positions open for day's shift - Salary £44,113 + 20% shift allowance - lunch allowance £396.25 = £53,331.85 + benefits 1 position open for 24/7 shift - Salary £44,113 + 35% shift allowance - lunch allowance £792.50 = £60,345.05 + benefits World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! You'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. As a mechanical Technician, you will join an established Mechanical Team within our top tier COMAH site, this role requires an experienced Industrial Mechanically biased maintenance technician who is able to demonstrate and execute a wide range of practical Mechanical skills, ranging from basic workshop skills including fabrication of pipework, steelwork, and plastics to working out on plant in a methodical & logical manner such that reactive faults can be identified and repaired safely, alongside working proactively by working on Planned maintenance & Routines scheduled by our Maintenance planner. As a Mechanical Technician, you will help drive our goals by: Responsible for the delivery of preventative/proactive maintenance of Mechanical systems and its sub or support systems Attending to any reactive/corrective maintenance that arises Fault finding, completing any repairs/replacements/calibration or set-up, installation of new systems/equipment, commissioning alongside operations on returning to service Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with. Key skills that will help you succeed in this role: Previous Manufacturing/Chemical industry experience Knowledge and experience of site services, Gas, Compressed air, Steam, cooling water and how to deenergise and work on safely. Knowledge and use of technical drawings & operator manuals alongside Mechanical exploded view/cross sectional drawings & P&ID's to aid fault diagnosis process. Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and offer benefits that support our employees' financial and physical wellbeing, such as: Competitive Retirement savings Company-matched Share Incentive Plan Life Assurance, Income Protection and Critical Illness Medical Plans/Health Assessments Retailer and Wellbeing Discounts Competitive Annual Incentive Plan Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
Job title: Mechanical Technician (Shift-Based Role) Location: Royston, UK (on-site) 2 positions open for day's shift - Salary £44,113 + 20% shift allowance - lunch allowance £396.25 = £53,331.85 + benefits 1 position open for 24/7 shift - Salary £44,113 + 35% shift allowance - lunch allowance £792.50 = £60,345.05 + benefits World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! You'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. As a mechanical Technician, you will join an established Mechanical Team within our top tier COMAH site, this role requires an experienced Industrial Mechanically biased maintenance technician who is able to demonstrate and execute a wide range of practical Mechanical skills, ranging from basic workshop skills including fabrication of pipework, steelwork, and plastics to working out on plant in a methodical & logical manner such that reactive faults can be identified and repaired safely, alongside working proactively by working on Planned maintenance & Routines scheduled by our Maintenance planner. As a Mechanical Technician, you will help drive our goals by: Responsible for the delivery of preventative/proactive maintenance of Mechanical systems and its sub or support systems Attending to any reactive/corrective maintenance that arises Fault finding, completing any repairs/replacements/calibration or set-up, installation of new systems/equipment, commissioning alongside operations on returning to service Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with. Key skills that will help you succeed in this role: Previous Manufacturing/Chemical industry experience Knowledge and experience of site services, Gas, Compressed air, Steam, cooling water and how to deenergise and work on safely. Knowledge and use of technical drawings & operator manuals alongside Mechanical exploded view/cross sectional drawings & P&ID's to aid fault diagnosis process. Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and offer benefits that support our employees' financial and physical wellbeing, such as: Competitive Retirement savings Company-matched Share Incentive Plan Life Assurance, Income Protection and Critical Illness Medical Plans/Health Assessments Retailer and Wellbeing Discounts Competitive Annual Incentive Plan Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
May 11, 2026
Full time
Job title: Mechanical Technician (Shift-Based Role) Location: Royston, UK (on-site) 2 positions open for day's shift - Salary £44,113 + 20% shift allowance - lunch allowance £396.25 = £53,331.85 + benefits 1 position open for 24/7 shift - Salary £44,113 + 35% shift allowance - lunch allowance £792.50 = £60,345.05 + benefits World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! You'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. As a mechanical Technician, you will join an established Mechanical Team within our top tier COMAH site, this role requires an experienced Industrial Mechanically biased maintenance technician who is able to demonstrate and execute a wide range of practical Mechanical skills, ranging from basic workshop skills including fabrication of pipework, steelwork, and plastics to working out on plant in a methodical & logical manner such that reactive faults can be identified and repaired safely, alongside working proactively by working on Planned maintenance & Routines scheduled by our Maintenance planner. As a Mechanical Technician, you will help drive our goals by: Responsible for the delivery of preventative/proactive maintenance of Mechanical systems and its sub or support systems Attending to any reactive/corrective maintenance that arises Fault finding, completing any repairs/replacements/calibration or set-up, installation of new systems/equipment, commissioning alongside operations on returning to service Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with. Key skills that will help you succeed in this role: Previous Manufacturing/Chemical industry experience Knowledge and experience of site services, Gas, Compressed air, Steam, cooling water and how to deenergise and work on safely. Knowledge and use of technical drawings & operator manuals alongside Mechanical exploded view/cross sectional drawings & P&ID's to aid fault diagnosis process. Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and offer benefits that support our employees' financial and physical wellbeing, such as: Competitive Retirement savings Company-matched Share Incentive Plan Life Assurance, Income Protection and Critical Illness Medical Plans/Health Assessments Retailer and Wellbeing Discounts Competitive Annual Incentive Plan Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
R&D Engineering Technician West Yorkshire Salary £35-37k Our client is a global leader in the development and manufacture of a range of seals and gaskets used in sectors including oil & gas, chemicals, food, water and pharmaceuticals. In this position you will play a key role in the physical and mechanical testing of sealing materials (compression testing, leakage testing etc) including R&D trials, competitor testing and troubleshooting, primarily using automated test equipment as well as traditional standard tests to ASTM, BS, DIN standards. You will also need to set up the various machines and carry out any fault-finding as required. There is a very strong focus on the use of MS Excel and carrying out data analysis and communication of the results within the R&D Team. Candidate Educated to at least 'A' level standard (or equivalent) ideally in maths, physics or mechanical engineering, or with equivalent industrial experience. Some experience in an engineering or instrumentation test laboratory environment would be advantageous. Proficient with MS Excel as data handling and data analysis is a key part of the role. Strong mathematical bias. Attention to detail is critical to this role. Hands-on mechanical skills, particularly with complex test equipment. Excellent oral and written communication skills. Able to work on own initiative and without constant supervision but also works well as part of a team. Good organisational and time management skills. Results oriented, critical thinker and problem solver.
May 04, 2026
Full time
R&D Engineering Technician West Yorkshire Salary £35-37k Our client is a global leader in the development and manufacture of a range of seals and gaskets used in sectors including oil & gas, chemicals, food, water and pharmaceuticals. In this position you will play a key role in the physical and mechanical testing of sealing materials (compression testing, leakage testing etc) including R&D trials, competitor testing and troubleshooting, primarily using automated test equipment as well as traditional standard tests to ASTM, BS, DIN standards. You will also need to set up the various machines and carry out any fault-finding as required. There is a very strong focus on the use of MS Excel and carrying out data analysis and communication of the results within the R&D Team. Candidate Educated to at least 'A' level standard (or equivalent) ideally in maths, physics or mechanical engineering, or with equivalent industrial experience. Some experience in an engineering or instrumentation test laboratory environment would be advantageous. Proficient with MS Excel as data handling and data analysis is a key part of the role. Strong mathematical bias. Attention to detail is critical to this role. Hands-on mechanical skills, particularly with complex test equipment. Excellent oral and written communication skills. Able to work on own initiative and without constant supervision but also works well as part of a team. Good organisational and time management skills. Results oriented, critical thinker and problem solver.
Astute's Power Team are working with one of the country's leading Waste Management companies and supporting the recruitment of their newest Energy from Waste facility. The Lostock Sustainable Energy Plant is currently under construction, and when complete will be exporting 70MW of electricity to the grid, processing circa 600,000 tonnes of waste per year. We are looking for a Mechanical Technician to join the Maintenance Team of this exciting project. As a Mechanical Technician, you'll be responsible for carrying out reactive and preventative maintenance across a variety of critical Mechanical assets. You'll also be involved with supporting commissioning activities and working towards the plants operational handover. If you're interested and have the right skillset then please apply. Responsibilities and duties of the Mechanical Technician role: Reporting directly to the Mechanical Team Leader, as a Mechanical Technician, you will be responsible for: Fault finding and maintaining mechanical assets including boilers, turbines, pumps, valves, compressors, conveyors, gearboxes etc. Working in line with maintenance techniques and best practices. To ensure compliance with the pressure regulations and lifting gear inspection requirements. Involved in continuous improvement activities, plant inspections and fault investigation work. Assisting in plant developments and projects. Supervising and setting to work on site contractors. Maintaining accurate maintenance records on the site CMMS. Assist in outage planning, scheduling and coordination. To ensure the availability of plant spares. Professional qualifications We are looking for someone with the following: A recognised qualification in Mechanical engineering at Level 3 (C&G, ONC, NVQ, SVQ) level or higher; other qualifications below this will be considered with extensive experience Ideally qualified with an IOSH or equivalent with an appreciation of workplace Health & Safety including knowledge of Safe Systems of Work, LOTO, Isolations, SOP's, RAMS would also be considered. Recognised Mechanical Maintenance Apprenticeship. Personal skills The Mechanical Technician role would suit someone who has: At least three years hands on maintenance experience. Familiar with Health & Safety Regulations such as LOLER, PUWER & PSSR. Hands on experience with a range of equipment including boilers, turbines, pumps, valves, compressors, conveyors, gearboxes etc. Practical knowledge of process plant and equipment gained in an industry such as Power Generation, Petrochemical or Oil & Gas etc. Marine Engineers from Merchant Fleet or Royal Navy will be considered. Involvement in plant mobilisation and commissioning is desirable but not essential. Salary and benefits of the Mechanical Technician role A competitive salary Site bonus up to 12% Overtime A contributory pension Opportunity to work on one of the newest Energy from Waste plants in the UK INDPOW Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Apr 30, 2026
Full time
Astute's Power Team are working with one of the country's leading Waste Management companies and supporting the recruitment of their newest Energy from Waste facility. The Lostock Sustainable Energy Plant is currently under construction, and when complete will be exporting 70MW of electricity to the grid, processing circa 600,000 tonnes of waste per year. We are looking for a Mechanical Technician to join the Maintenance Team of this exciting project. As a Mechanical Technician, you'll be responsible for carrying out reactive and preventative maintenance across a variety of critical Mechanical assets. You'll also be involved with supporting commissioning activities and working towards the plants operational handover. If you're interested and have the right skillset then please apply. Responsibilities and duties of the Mechanical Technician role: Reporting directly to the Mechanical Team Leader, as a Mechanical Technician, you will be responsible for: Fault finding and maintaining mechanical assets including boilers, turbines, pumps, valves, compressors, conveyors, gearboxes etc. Working in line with maintenance techniques and best practices. To ensure compliance with the pressure regulations and lifting gear inspection requirements. Involved in continuous improvement activities, plant inspections and fault investigation work. Assisting in plant developments and projects. Supervising and setting to work on site contractors. Maintaining accurate maintenance records on the site CMMS. Assist in outage planning, scheduling and coordination. To ensure the availability of plant spares. Professional qualifications We are looking for someone with the following: A recognised qualification in Mechanical engineering at Level 3 (C&G, ONC, NVQ, SVQ) level or higher; other qualifications below this will be considered with extensive experience Ideally qualified with an IOSH or equivalent with an appreciation of workplace Health & Safety including knowledge of Safe Systems of Work, LOTO, Isolations, SOP's, RAMS would also be considered. Recognised Mechanical Maintenance Apprenticeship. Personal skills The Mechanical Technician role would suit someone who has: At least three years hands on maintenance experience. Familiar with Health & Safety Regulations such as LOLER, PUWER & PSSR. Hands on experience with a range of equipment including boilers, turbines, pumps, valves, compressors, conveyors, gearboxes etc. Practical knowledge of process plant and equipment gained in an industry such as Power Generation, Petrochemical or Oil & Gas etc. Marine Engineers from Merchant Fleet or Royal Navy will be considered. Involvement in plant mobilisation and commissioning is desirable but not essential. Salary and benefits of the Mechanical Technician role A competitive salary Site bonus up to 12% Overtime A contributory pension Opportunity to work on one of the newest Energy from Waste plants in the UK INDPOW Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Astute's Power Team is partnered with a market-leading company, within the Power Generation sector, to recruit for a Mechanical Technician to join their Combined Cycle Gas Turbine (CCGT) Power Station in Hertfordshire. You will be responsible for all mechanical maintenance related activities at the station. The post holder is required to plan, contract (including the management of contractors) and/or physically carry out mechanical maintenance works at the site, including the preparation of method statements and Risk Assessments, as required. The vital Mechanical Technician role comes with a basic salary of 45,000 - 48,000 + 2,172 location allowance per annum + overtime + up to 20% bonus + Private Medical + excellent benefits package. If you're a HNC / ONC / HND qualified Mechanical Technician and keen to work for one of the largest operators of Gas Power Stations in the UK, then upload your CV to apply today. Responsibilities and duties: As the Mechanical Technician you will be responsible for: Carry out hands-on mechanical maintenance, fault finding, and repair activities across plant equipment and systems. Plan and coordinate preventative and corrective maintenance to ensure safe, reliable plant performance. Prepare risk assessments, method statements, and work packs for maintenance tasks and shutdown activities. Manage contractors and maintenance service contracts, including supervision during outages, inspections, and overhauls. Support major plant inspections, interim outages, and mechanical overhauls across thermal generation assets. Ensure full compliance with HSE legislation, company safety rules, and environmental standards. Act as Competent Person / Authorised Person where required to support safe system isolation and permit processes. Provide 24/7 maintenance support and rapid fault response during plant failures and breakdowns. Support budget control, procurement, and technical specification development for mechanical works and spares. Work cross-functionally with operations, suppliers, and other engineering disciplines to improve reliability and maintenance best practice. Professional qualifications We are looking for someone with the following: Ideally apprenticeship trained in a relevant Mechanical Engineering field. Qualified with a HNC, ONC or HND in a relevant Engineering field. Certified IOSH or NEBOSH holder. Personal skills The Mechanical Technician role would suit someone with/who: At least five years mechanical maintenance experience on a Power Station or similar regulated Process Plant such as Steelworks, Refinery, Petrochemical etc. Can be confident working independently with minimal supervision Is a clear and confident communicator - able to work effectively within an open-plan office and site-based team environment. Is a quick thinker with strong fault-finding and problem-solving ability, especially during plant issues or failures. Salary and benefits of the Mechanical Technician role Competitive salary starting at 45,000 - 48,000 2,172 per year Location Allowance Up to 20% Bonus Opportunity Enhanced benefits package Opportunity to join a large Thermal Power Station INDPOW Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Apr 30, 2026
Full time
Astute's Power Team is partnered with a market-leading company, within the Power Generation sector, to recruit for a Mechanical Technician to join their Combined Cycle Gas Turbine (CCGT) Power Station in Hertfordshire. You will be responsible for all mechanical maintenance related activities at the station. The post holder is required to plan, contract (including the management of contractors) and/or physically carry out mechanical maintenance works at the site, including the preparation of method statements and Risk Assessments, as required. The vital Mechanical Technician role comes with a basic salary of 45,000 - 48,000 + 2,172 location allowance per annum + overtime + up to 20% bonus + Private Medical + excellent benefits package. If you're a HNC / ONC / HND qualified Mechanical Technician and keen to work for one of the largest operators of Gas Power Stations in the UK, then upload your CV to apply today. Responsibilities and duties: As the Mechanical Technician you will be responsible for: Carry out hands-on mechanical maintenance, fault finding, and repair activities across plant equipment and systems. Plan and coordinate preventative and corrective maintenance to ensure safe, reliable plant performance. Prepare risk assessments, method statements, and work packs for maintenance tasks and shutdown activities. Manage contractors and maintenance service contracts, including supervision during outages, inspections, and overhauls. Support major plant inspections, interim outages, and mechanical overhauls across thermal generation assets. Ensure full compliance with HSE legislation, company safety rules, and environmental standards. Act as Competent Person / Authorised Person where required to support safe system isolation and permit processes. Provide 24/7 maintenance support and rapid fault response during plant failures and breakdowns. Support budget control, procurement, and technical specification development for mechanical works and spares. Work cross-functionally with operations, suppliers, and other engineering disciplines to improve reliability and maintenance best practice. Professional qualifications We are looking for someone with the following: Ideally apprenticeship trained in a relevant Mechanical Engineering field. Qualified with a HNC, ONC or HND in a relevant Engineering field. Certified IOSH or NEBOSH holder. Personal skills The Mechanical Technician role would suit someone with/who: At least five years mechanical maintenance experience on a Power Station or similar regulated Process Plant such as Steelworks, Refinery, Petrochemical etc. Can be confident working independently with minimal supervision Is a clear and confident communicator - able to work effectively within an open-plan office and site-based team environment. Is a quick thinker with strong fault-finding and problem-solving ability, especially during plant issues or failures. Salary and benefits of the Mechanical Technician role Competitive salary starting at 45,000 - 48,000 2,172 per year Location Allowance Up to 20% Bonus Opportunity Enhanced benefits package Opportunity to join a large Thermal Power Station INDPOW Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Job Description About the Role The Laboratory Technician will join the Engineering Team based in Flotta, working closely with both the Chemistry and global Service Teams. This role is focused on supporting laboratory operations and technical projects through practical, hands-on work and routine analytical testing. Primarily based in Flotta, the Laboratory Technician will assist in the preparation, execution, and documentation of laboratory analyses and experimental activities. They will also support Test Hall activities and, where required, undertake site-based service work at onshore and offshore client locations. This is an excellent opportunity for a practical and detail-oriented individual to develop technical skills in a dynamic engineering & chemistry environment, with full training provided. About the Company NOV delivers technology-driven solutions that support the global energy industry. We are known for innovation, quality, and reliability, supporting customers across drilling, completion, production, and industrial markets. This role sits within Process Systems and supports the growing demand for chemistry capability both on Flotta and globally, helping the team deliver projects efficiently and to a high technical standard. What We Offer A hands-on primarily laboratory-based role with visible impact on quality and operational decisions Structured onboarding and learning support (a good fit for early-career candidates) Exposure to real-life quality systems, documentation standards, and cross-functional collaboration A safety-first environment with clear procedures and supportive teamwork Competitive compensation and benefits package Key Responsibilities Support laboratory testing, analysis, and experimental studies under the guidance of senior team members Assist with fluid characterisation work using established analytical tools and techniques. Contribute to desk-based technical studies, data analysis, and report preparation. Provide support to Test Hall activities, including assisting with the installation, operation, testing, and dismantling of process test equipment. Assist in delivering site-based services at Flotta and, as experience develops, at client locations globally (onshore and offshore). Participate in research and development activities to support continuous improvement of laboratory methods and company capabilities. Help maintain lab documentation (test logs, reports, checklists) in line with internal quality requirements. Support with the maintainenece of laboratory equipment (cleaning, basic troubleshooting, calibration checks) and keep related records. Follow HSE rules, including safe handling of chemicals and proper waste management and housekeeping. Contribute to continuous improvement of testing workflows, methods, and documentation. Qualifications & Skills Essential A secondary qualification in chemistry or applied sciences. Computer literacy with working proficiency in Microsoft Word and Excel. Strong attention to detail and ability to follow written procedures consistently. Readiness to work in a laboratory environment (including safe handling of chemicals and use of PPE). Desirable Work experience in a laboratory setting (including internships/placements). Chemistry/applied science graduate (or equivalent) willing to learn and develop laboratory skills. Basic understanding of quality documentation or reporting (e.g., structured recording of results in Excel). Soft Skills Organized and reliable, with a high standard for data accuracy and documentation quality Team-oriented, with clear communication skills across business functions and offices Able to manage multiple tasks and meet deadlines in a structured environment Proactive mindset: flags issues early and suggests improvements Why Join Us? At NOV, you will be part of a global organization where quality and safety matter. This role provides a strong foundation for a longer-term career path within Quality, Operations, or Engineering. You will gain practical lab experience, develop discipline in documentation and standards, and collaborate with experienced colleagues working on impactful industrial challenges. Join our Global Family At NOV, we are committed to supporting your personal, financial, and professional wellbeing. Our comprehensive benefits package includes: Health & Wellbeing Private Medical Insurance Employee Assistance Programme (EAP) Finance & Protection Pension Plan Income Protection Life Assurance Personal Accident Coverage Flexible Benefits (via salary sacrifice options for you and your family) Dental Insurance Healthcare Cash Plan Partner Life Assurance Critical Illness Cover Retail Vouchers Gym Membership Cycle to Work Scheme About Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team Corporate Our family of companies is supported by our global Corporate teams, providing expert knowledge from functions including Human Resources, Information Technology, Compliance, Finance, QHSE, Marketing and Legal centers of expertise. We are structured to provide guidance and service above all to all our business operations.
Apr 30, 2026
Full time
Job Description About the Role The Laboratory Technician will join the Engineering Team based in Flotta, working closely with both the Chemistry and global Service Teams. This role is focused on supporting laboratory operations and technical projects through practical, hands-on work and routine analytical testing. Primarily based in Flotta, the Laboratory Technician will assist in the preparation, execution, and documentation of laboratory analyses and experimental activities. They will also support Test Hall activities and, where required, undertake site-based service work at onshore and offshore client locations. This is an excellent opportunity for a practical and detail-oriented individual to develop technical skills in a dynamic engineering & chemistry environment, with full training provided. About the Company NOV delivers technology-driven solutions that support the global energy industry. We are known for innovation, quality, and reliability, supporting customers across drilling, completion, production, and industrial markets. This role sits within Process Systems and supports the growing demand for chemistry capability both on Flotta and globally, helping the team deliver projects efficiently and to a high technical standard. What We Offer A hands-on primarily laboratory-based role with visible impact on quality and operational decisions Structured onboarding and learning support (a good fit for early-career candidates) Exposure to real-life quality systems, documentation standards, and cross-functional collaboration A safety-first environment with clear procedures and supportive teamwork Competitive compensation and benefits package Key Responsibilities Support laboratory testing, analysis, and experimental studies under the guidance of senior team members Assist with fluid characterisation work using established analytical tools and techniques. Contribute to desk-based technical studies, data analysis, and report preparation. Provide support to Test Hall activities, including assisting with the installation, operation, testing, and dismantling of process test equipment. Assist in delivering site-based services at Flotta and, as experience develops, at client locations globally (onshore and offshore). Participate in research and development activities to support continuous improvement of laboratory methods and company capabilities. Help maintain lab documentation (test logs, reports, checklists) in line with internal quality requirements. Support with the maintainenece of laboratory equipment (cleaning, basic troubleshooting, calibration checks) and keep related records. Follow HSE rules, including safe handling of chemicals and proper waste management and housekeeping. Contribute to continuous improvement of testing workflows, methods, and documentation. Qualifications & Skills Essential A secondary qualification in chemistry or applied sciences. Computer literacy with working proficiency in Microsoft Word and Excel. Strong attention to detail and ability to follow written procedures consistently. Readiness to work in a laboratory environment (including safe handling of chemicals and use of PPE). Desirable Work experience in a laboratory setting (including internships/placements). Chemistry/applied science graduate (or equivalent) willing to learn and develop laboratory skills. Basic understanding of quality documentation or reporting (e.g., structured recording of results in Excel). Soft Skills Organized and reliable, with a high standard for data accuracy and documentation quality Team-oriented, with clear communication skills across business functions and offices Able to manage multiple tasks and meet deadlines in a structured environment Proactive mindset: flags issues early and suggests improvements Why Join Us? At NOV, you will be part of a global organization where quality and safety matter. This role provides a strong foundation for a longer-term career path within Quality, Operations, or Engineering. You will gain practical lab experience, develop discipline in documentation and standards, and collaborate with experienced colleagues working on impactful industrial challenges. Join our Global Family At NOV, we are committed to supporting your personal, financial, and professional wellbeing. Our comprehensive benefits package includes: Health & Wellbeing Private Medical Insurance Employee Assistance Programme (EAP) Finance & Protection Pension Plan Income Protection Life Assurance Personal Accident Coverage Flexible Benefits (via salary sacrifice options for you and your family) Dental Insurance Healthcare Cash Plan Partner Life Assurance Critical Illness Cover Retail Vouchers Gym Membership Cycle to Work Scheme About Us Every day, the oil and gas industry's best minds put more than 150 years of experience to work to help our customers achieve lasting success. We Power the Industry that Powers the World Throughout every region in the world and across every area of drilling and production, our family of companies has provided the technical expertise, advanced equipment, and operational support necessary for success-now and in the future. Global Family We are a global family of thousands of individuals, working as one team to create a lasting impact for ourselves, our customers, and the communities where we live and work. Purposeful Innovation Through purposeful business innovation, product creation, and service delivery, we are driven to power the industry that powers the world better. Service Above All This drives us to anticipate our customers' needs and work with them to deliver the finest products and services on time and on budget. About the Team Corporate Our family of companies is supported by our global Corporate teams, providing expert knowledge from functions including Human Resources, Information Technology, Compliance, Finance, QHSE, Marketing and Legal centers of expertise. We are structured to provide guidance and service above all to all our business operations.
Join a leading oil and gas company in Grangemouth as an Electrical Technician, offering a salary of up to 43,600 plus excellent benefits including holidays, pension and healthcare. Where your expertise will play a vital role in keeping critical infrastructure running safely and efficiently. This is an exciting opportunity to work within a highly skilled maintenance team on a complex and dynamic site. If you're looking for long-term career progression and the chance to develop within a major industrial environment, this could be your next move. Salary and Benefits Annual Salary Between: 40,000 - 43,600 (DOE) Private Medical Insurance 25 Holidays + 8 Bank Holidays Career Development Opportunities Up to 9% Employer Pension Contribution Life Assurance Policy (5X Annual Salary) Healthcare Cash Plan Study Support The role of Electrical Technician We are seeking a skilled Electrical Technician to join the Maintenance team, responsible for delivering day-to-day electrical maintenance, inspection, testing and repairs across the pipeline system. The role supports the safe and reliable operation of electrical infrastructure by responding to faults, resolving equipment issues and maintaining compliance with company and regulatory standards. Working closely with technical teams, site supervisors and operations, you will help ensure systems remain efficient, dependable and fit for purpose. Key Responsibilities of the Electrical Technician: Carry out maintenance, overhaul, fault finding and repair of electrical equipment using OEM manuals, drawings and engineering documentation. Respond to breakdowns, support diagnostics, and complete inspections in line with BS7671 and BS60079 standards. Plan, coordinate and oversee contractor activities, including permits, handovers, and safe isolation procedures. Maintain accurate records via CMMS, including work orders, parts used, remedial actions, and asset/PPM updates. Support site operations through calibration of instruments, alarm testing, and maintenance of systems such as SCADA and tank gauging. Manage stock, liaise with suppliers, and support continuous improvement through audits, training of junior staff, and development of procedures. Essential Criteria for the Electrical Technician Qualified Electrical Technician with a recognised time-served apprenticeship and certifications including compex, 2394/2395 , and 17th Edition / BS7671 . Proven experience in petrochemical or process industry environments , with strong knowledge of permit systems, site safety rules, and ability to interpret technical drawings. Effective communicator able to work collaboratively across teams while managing workload independently. Proactive approach with strong ownership, high safety standards, and good IT skills ; physically fit with a clean driving licence. Desirable: additional compex modules (EX01-04), CCNSG, HV Authorised Person, ATG or Rotork experience, COMAH awareness, confined space and first aid training, plus basic mechanical skills. How to Apply To apply for the Electrical Technician role, please submit your CV direct or reach out to Toni-Marie Monks at E3 Recruitment.
Apr 29, 2026
Full time
Join a leading oil and gas company in Grangemouth as an Electrical Technician, offering a salary of up to 43,600 plus excellent benefits including holidays, pension and healthcare. Where your expertise will play a vital role in keeping critical infrastructure running safely and efficiently. This is an exciting opportunity to work within a highly skilled maintenance team on a complex and dynamic site. If you're looking for long-term career progression and the chance to develop within a major industrial environment, this could be your next move. Salary and Benefits Annual Salary Between: 40,000 - 43,600 (DOE) Private Medical Insurance 25 Holidays + 8 Bank Holidays Career Development Opportunities Up to 9% Employer Pension Contribution Life Assurance Policy (5X Annual Salary) Healthcare Cash Plan Study Support The role of Electrical Technician We are seeking a skilled Electrical Technician to join the Maintenance team, responsible for delivering day-to-day electrical maintenance, inspection, testing and repairs across the pipeline system. The role supports the safe and reliable operation of electrical infrastructure by responding to faults, resolving equipment issues and maintaining compliance with company and regulatory standards. Working closely with technical teams, site supervisors and operations, you will help ensure systems remain efficient, dependable and fit for purpose. Key Responsibilities of the Electrical Technician: Carry out maintenance, overhaul, fault finding and repair of electrical equipment using OEM manuals, drawings and engineering documentation. Respond to breakdowns, support diagnostics, and complete inspections in line with BS7671 and BS60079 standards. Plan, coordinate and oversee contractor activities, including permits, handovers, and safe isolation procedures. Maintain accurate records via CMMS, including work orders, parts used, remedial actions, and asset/PPM updates. Support site operations through calibration of instruments, alarm testing, and maintenance of systems such as SCADA and tank gauging. Manage stock, liaise with suppliers, and support continuous improvement through audits, training of junior staff, and development of procedures. Essential Criteria for the Electrical Technician Qualified Electrical Technician with a recognised time-served apprenticeship and certifications including compex, 2394/2395 , and 17th Edition / BS7671 . Proven experience in petrochemical or process industry environments , with strong knowledge of permit systems, site safety rules, and ability to interpret technical drawings. Effective communicator able to work collaboratively across teams while managing workload independently. Proactive approach with strong ownership, high safety standards, and good IT skills ; physically fit with a clean driving licence. Desirable: additional compex modules (EX01-04), CCNSG, HV Authorised Person, ATG or Rotork experience, COMAH awareness, confined space and first aid training, plus basic mechanical skills. How to Apply To apply for the Electrical Technician role, please submit your CV direct or reach out to Toni-Marie Monks at E3 Recruitment.
Mechanical Maintenance Technician Salary: £negotiable + 34 days holiday + 8% pension + Life assurance x4 annual salary Location: Yeadon / Otley (easily commutable from Bradford, Leeds, Harrogate) Hours: Monday to Friday Days 7am 4pm The Job: 70-80% preventative maintenance and 20-30% reactive. Good prospects for training and gaining experience from experienced supervisors and managers. Prospects to be involved in future modernisation projects A mixture of old and new equipment and machinery across a large site Pumps, gearboxes, agitators, mixing vessels, boilers and boiler house equipment, compressors, fans, gas booster systems, hydraulics, pneumatics, overhead cranes and lift systems. Installation of new rotating equipment including accurate alignment. Working with apprentices as well as very experienced maintenance and production staff. Thorough training and onboarding The Person: Ideally 5 years + maintenance experience gained in an industrial or manufacturing setting Project experience may be an advantage for potential future investment and modernisation projects Background in any of the following would be useful; heavier engineering process plants, chemical, steel, metals, glass, recycling, CHP, energy, gas, paper. Ultimately most backgrounds / applicants considered. Desirable Skills / Not Essential: Machining on lathes, milling machine, pillar drill etc. Welding and basic fabrication. Compex or Atex awareness or certificates would be an advantage but not essential. The Company: The company is very well established with a global customer base manufacturing sustainable and in demand products. The team and company are very friendly and work as a team. A professional yet informal and relaxed feel to the plant. There will be opportunities to improve and learn new skills, get involved in projects and progress if you wanted to. Low staff turnover and £ several million invested recently. To apply send CV to Tim Fawcett at Control Recruitment Solutions or contact us via the office number. Key; mechanical technician, mechanical maintenance engineer, mechanical engineer; project engineer; area engineer; section engineer; scada; maintenance engineering; steam, comah; boiler; pressure; plant; pssr; electrical engineering; electrical maintenance engineer; tissue, paper, paper mill; hrsg; PLC, dcs; commissioning; superheated steam; steam generator; Manufacturing; propulsion; power; chemical; navy; marine; pressure vessels; tanks; heat exchangers; marine engineer; Plant Engineering; Marine Engineering; pneumatics; hydraulics; combustion engineering; rollers, renewable, biomass; CHP; combined heat and power; high pressure steam; steam rising; reliability; materials handling; solids handling; process machinery; aluminium; food; pharmaceutical; plastics; chemicals; feeds; mixers; hoppers; silos; tanks; heat exchangers; pressure vessels.
Apr 28, 2026
Full time
Mechanical Maintenance Technician Salary: £negotiable + 34 days holiday + 8% pension + Life assurance x4 annual salary Location: Yeadon / Otley (easily commutable from Bradford, Leeds, Harrogate) Hours: Monday to Friday Days 7am 4pm The Job: 70-80% preventative maintenance and 20-30% reactive. Good prospects for training and gaining experience from experienced supervisors and managers. Prospects to be involved in future modernisation projects A mixture of old and new equipment and machinery across a large site Pumps, gearboxes, agitators, mixing vessels, boilers and boiler house equipment, compressors, fans, gas booster systems, hydraulics, pneumatics, overhead cranes and lift systems. Installation of new rotating equipment including accurate alignment. Working with apprentices as well as very experienced maintenance and production staff. Thorough training and onboarding The Person: Ideally 5 years + maintenance experience gained in an industrial or manufacturing setting Project experience may be an advantage for potential future investment and modernisation projects Background in any of the following would be useful; heavier engineering process plants, chemical, steel, metals, glass, recycling, CHP, energy, gas, paper. Ultimately most backgrounds / applicants considered. Desirable Skills / Not Essential: Machining on lathes, milling machine, pillar drill etc. Welding and basic fabrication. Compex or Atex awareness or certificates would be an advantage but not essential. The Company: The company is very well established with a global customer base manufacturing sustainable and in demand products. The team and company are very friendly and work as a team. A professional yet informal and relaxed feel to the plant. There will be opportunities to improve and learn new skills, get involved in projects and progress if you wanted to. Low staff turnover and £ several million invested recently. To apply send CV to Tim Fawcett at Control Recruitment Solutions or contact us via the office number. Key; mechanical technician, mechanical maintenance engineer, mechanical engineer; project engineer; area engineer; section engineer; scada; maintenance engineering; steam, comah; boiler; pressure; plant; pssr; electrical engineering; electrical maintenance engineer; tissue, paper, paper mill; hrsg; PLC, dcs; commissioning; superheated steam; steam generator; Manufacturing; propulsion; power; chemical; navy; marine; pressure vessels; tanks; heat exchangers; marine engineer; Plant Engineering; Marine Engineering; pneumatics; hydraulics; combustion engineering; rollers, renewable, biomass; CHP; combined heat and power; high pressure steam; steam rising; reliability; materials handling; solids handling; process machinery; aluminium; food; pharmaceutical; plastics; chemicals; feeds; mixers; hoppers; silos; tanks; heat exchangers; pressure vessels.
Chemistry Laboratory Technician Location: Cambridge, UK Salary: 13 - 14 p/h (commensurate with experience) Duration: Anticipated 12 month contract initially Proclinical is working alongside a discovery-focused life sciences organisation which is based in Cambridge and is seeking a Chemistry Laboratory Technician to join its laboratory operations team. This is a hands-on, lab-based role supporting day-to-day chemistry lab activities within a modern drug discovery environment. The position is central to ensuring laboratories run smoothly, enabling scientists to focus on core research and discovery work. It will primarily support the Chemistry function, with scope to provide wider operational support across related scientific teams as the organisation continues to grow. Key Responsibilities include; Laboratory & Inventory Support Register incoming chemicals into the laboratory inventory system Manage consumables, reagents and solvent stock using structured stock control processes (e.g. Kanban) Place chemical and consumable orders via catalogue and non-catalogue systems Waste & Compliance Prepare, label and manage chemical waste streams in line with regulatory requirements Coordinate waste collections with internal and campus-wide teams Support COSHH documentation for laboratory technician activities Laboratory Operations General laboratory housekeeping and support tasks Dry ice top-ups, liquid nitrogen refills and gas cylinder checks Preparation of solutions and LC?MS solvent management Routine fume hood airflow checks Monitor and replenish PPE, spill kits and first aid supplies Coordinate lab coat laundering Equipment Support Basic support of open-access analytical equipment (e.g. LC?MS, NMR), including solvent management and routine checks Raise maintenance requests and liaise with vendors where required Cross Functional Support Provide operational resilience across other laboratory functions, including biology, compound management and DMPK as needed Experience & Skills: Demonstrable experience working in a laboratory environment Good understanding of laboratory operations, safety and compliance Strong organisational skills with attention to detail Comfortable working independently and as part of a multidisciplinary team Competent IT skills (e.g. Microsoft Office) Desirable (but not essential): Degree in Chemistry or a related scientific discipline Knowledge of COSHH and chemical inventory systems Exposure to LC?MS, NMR or HPLC in a support capacity Experience with procurement or stock management systems If you are having difficulty in applying or if you have any questions, please contact Neil Walton at (url removed). If you are interested in applying to this exciting opportunity, then please click 'Apply' or to speak to one of our specialists please request a call back at the top of this page. Proclinical is a leading life sciences recruiter focused on finding exceptional people and matching them with the finest positions across the globe. Proclinical is acting as an Employment Agency in relation to this vacancy. By submitting this application, you confirm that you've read and understood our privacy policy, which informs you how we process and safeguard your data - (url removed)
Apr 27, 2026
Contractor
Chemistry Laboratory Technician Location: Cambridge, UK Salary: 13 - 14 p/h (commensurate with experience) Duration: Anticipated 12 month contract initially Proclinical is working alongside a discovery-focused life sciences organisation which is based in Cambridge and is seeking a Chemistry Laboratory Technician to join its laboratory operations team. This is a hands-on, lab-based role supporting day-to-day chemistry lab activities within a modern drug discovery environment. The position is central to ensuring laboratories run smoothly, enabling scientists to focus on core research and discovery work. It will primarily support the Chemistry function, with scope to provide wider operational support across related scientific teams as the organisation continues to grow. Key Responsibilities include; Laboratory & Inventory Support Register incoming chemicals into the laboratory inventory system Manage consumables, reagents and solvent stock using structured stock control processes (e.g. Kanban) Place chemical and consumable orders via catalogue and non-catalogue systems Waste & Compliance Prepare, label and manage chemical waste streams in line with regulatory requirements Coordinate waste collections with internal and campus-wide teams Support COSHH documentation for laboratory technician activities Laboratory Operations General laboratory housekeeping and support tasks Dry ice top-ups, liquid nitrogen refills and gas cylinder checks Preparation of solutions and LC?MS solvent management Routine fume hood airflow checks Monitor and replenish PPE, spill kits and first aid supplies Coordinate lab coat laundering Equipment Support Basic support of open-access analytical equipment (e.g. LC?MS, NMR), including solvent management and routine checks Raise maintenance requests and liaise with vendors where required Cross Functional Support Provide operational resilience across other laboratory functions, including biology, compound management and DMPK as needed Experience & Skills: Demonstrable experience working in a laboratory environment Good understanding of laboratory operations, safety and compliance Strong organisational skills with attention to detail Comfortable working independently and as part of a multidisciplinary team Competent IT skills (e.g. Microsoft Office) Desirable (but not essential): Degree in Chemistry or a related scientific discipline Knowledge of COSHH and chemical inventory systems Exposure to LC?MS, NMR or HPLC in a support capacity Experience with procurement or stock management systems If you are having difficulty in applying or if you have any questions, please contact Neil Walton at (url removed). If you are interested in applying to this exciting opportunity, then please click 'Apply' or to speak to one of our specialists please request a call back at the top of this page. Proclinical is a leading life sciences recruiter focused on finding exceptional people and matching them with the finest positions across the globe. Proclinical is acting as an Employment Agency in relation to this vacancy. By submitting this application, you confirm that you've read and understood our privacy policy, which informs you how we process and safeguard your data - (url removed)
Pipeline Services UK Ltd
Shirebrook, Nottinghamshire
Job Description: Pipeline Services (UK) have successfully provided solutions to pipelines all over the world for over 20 years. Covering most sectors of the pipeline industry globally, we provide services for a range of product mediums including water, gas and oil along with more exclusive products such as district heating, petrochemical and aviation fuel lines, as well as operating offshore. To support our ever-growing team, we are seeking an ambitious individual to join the company on a permanent basis. You will be based at our headquarters in Shirebrook, Nottingham, as well as attending various sites not only in the UK but globally. You will be given the required training to develop your skills and confidence as a service technician allowing you to work on pressurised piping systems across all mediums. Along with developing the required knowledge to perform under pressure drillings and line stops, you will get the opportunity to travel worldwide. To be considered for this role, you must hold a full UK driving licence and valid passport. You must be willing to travel not only in the UK but globally as you will be required to work away on various pipeline projects. You must be keen to learn and develop new skills along with being conscientious and working not only individually but as part of a team. You must want to take responsibility and pride in your work not only when on site but also when working in our service centre. Previous experience in CNC machining, welding and fabrication or utilities work may aid your application. Any training qualifications such as EUSR water hygiene or SHEA gas will also be taken into consideration. Job Types: Full-time, Permanent Benefits: On-site parking Overtime Overseas bonus All required training provided Pension Scheme Ability to commute/relocate: Mansfield NG20 8RJ: reliably commute or plan to relocate before starting work (required) Education: GCSE or equivalent (preferred) Language: English (required) Licence/Certification: Drivers License (required) Passport (required) Work authorisation: United Kingdom (required) Willingness to travel: 100% (required) Work Location: In person Pay: To be discussed.
Apr 27, 2026
Full time
Job Description: Pipeline Services (UK) have successfully provided solutions to pipelines all over the world for over 20 years. Covering most sectors of the pipeline industry globally, we provide services for a range of product mediums including water, gas and oil along with more exclusive products such as district heating, petrochemical and aviation fuel lines, as well as operating offshore. To support our ever-growing team, we are seeking an ambitious individual to join the company on a permanent basis. You will be based at our headquarters in Shirebrook, Nottingham, as well as attending various sites not only in the UK but globally. You will be given the required training to develop your skills and confidence as a service technician allowing you to work on pressurised piping systems across all mediums. Along with developing the required knowledge to perform under pressure drillings and line stops, you will get the opportunity to travel worldwide. To be considered for this role, you must hold a full UK driving licence and valid passport. You must be willing to travel not only in the UK but globally as you will be required to work away on various pipeline projects. You must be keen to learn and develop new skills along with being conscientious and working not only individually but as part of a team. You must want to take responsibility and pride in your work not only when on site but also when working in our service centre. Previous experience in CNC machining, welding and fabrication or utilities work may aid your application. Any training qualifications such as EUSR water hygiene or SHEA gas will also be taken into consideration. Job Types: Full-time, Permanent Benefits: On-site parking Overtime Overseas bonus All required training provided Pension Scheme Ability to commute/relocate: Mansfield NG20 8RJ: reliably commute or plan to relocate before starting work (required) Education: GCSE or equivalent (preferred) Language: English (required) Licence/Certification: Drivers License (required) Passport (required) Work authorisation: United Kingdom (required) Willingness to travel: 100% (required) Work Location: In person Pay: To be discussed.
Job title: Mechanical Technician (Shift-Based Role) Location: Royston, UK (on-site) 2 positions open for day's shift - Salary £44,113 + 20% shift allowance - lunch allowance £396.25 = £53,331.85 + benefits 1 position open for 24/7 shift - Salary £44,113 + 35% shift allowance - lunch allowance £792.50 = £60,345.05 + benefits World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! You'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. As a mechanical Technician, you will join an established Mechanical Team within our top tier COMAH site, this role requires an experienced Industrial Mechanically biased maintenance technician who is able to demonstrate and execute a wide range of practical Mechanical skills, ranging from basic workshop skills including fabrication of pipework, steelwork, and plastics to working out on plant in a methodical & logical manner such that reactive faults can be identified and repaired safely, alongside working proactively by working on Planned maintenance & Routines scheduled by our Maintenance planner. As a Mechanical Technician, you will help drive our goals by: Responsible for the delivery of preventative/proactive maintenance of Mechanical systems and its sub or support systems Attending to any reactive/corrective maintenance that arises Fault finding, completing any repairs/replacements/calibration or set-up, installation of new systems/equipment, commissioning alongside operations on returning to service Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with. Key skills that will help you succeed in this role: Previous Manufacturing/Chemical industry experience Knowledge and experience of site services, Gas, Compressed air, Steam, cooling water and how to deenergise and work on safely. Knowledge and use of technical drawings & operator manuals alongside Mechanical exploded view/cross sectional drawings & P&ID's to aid fault diagnosis process. Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and offer benefits that support our employees' financial and physical wellbeing, such as: Competitive Retirement savings Company-matched Share Incentive Plan Life Assurance, Income Protection and Critical Illness Medical Plans/Health Assessments Retailer and Wellbeing Discounts Competitive Annual Incentive Plan Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
Apr 13, 2026
Full time
Job title: Mechanical Technician (Shift-Based Role) Location: Royston, UK (on-site) 2 positions open for day's shift - Salary £44,113 + 20% shift allowance - lunch allowance £396.25 = £53,331.85 + benefits 1 position open for 24/7 shift - Salary £44,113 + 35% shift allowance - lunch allowance £792.50 = £60,345.05 + benefits World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! You'll contribute to JM's mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future. As a mechanical Technician, you will join an established Mechanical Team within our top tier COMAH site, this role requires an experienced Industrial Mechanically biased maintenance technician who is able to demonstrate and execute a wide range of practical Mechanical skills, ranging from basic workshop skills including fabrication of pipework, steelwork, and plastics to working out on plant in a methodical & logical manner such that reactive faults can be identified and repaired safely, alongside working proactively by working on Planned maintenance & Routines scheduled by our Maintenance planner. As a Mechanical Technician, you will help drive our goals by: Responsible for the delivery of preventative/proactive maintenance of Mechanical systems and its sub or support systems Attending to any reactive/corrective maintenance that arises Fault finding, completing any repairs/replacements/calibration or set-up, installation of new systems/equipment, commissioning alongside operations on returning to service Contribute to improving the site performance in all aspects of safe operation, regulatory compliance, productive output and cost efficiency by improving the engineering reliability of site equipment and ensuring appropriate maintenance frequency of assets is complied with. Key skills that will help you succeed in this role: Previous Manufacturing/Chemical industry experience Knowledge and experience of site services, Gas, Compressed air, Steam, cooling water and how to deenergise and work on safely. Knowledge and use of technical drawings & operator manuals alongside Mechanical exploded view/cross sectional drawings & P&ID's to aid fault diagnosis process. Even if you only match some of the skills, we'd love to hear from you to discuss further! What we offer: We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and offer benefits that support our employees' financial and physical wellbeing, such as: Competitive Retirement savings Company-matched Share Incentive Plan Life Assurance, Income Protection and Critical Illness Medical Plans/Health Assessments Retailer and Wellbeing Discounts Competitive Annual Incentive Plan Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career! At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected. For any queries or accessibility requirements, please contact (url removed). We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience. Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised. To submit your application, please click the "Apply" button online. All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information. For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice. Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.
