1323 jobs found

The client are an established designer and manufacturer of bespoke test systems and applications for the automotive industry. They are seeking to recruit an Installations and Commissioning Engineer for their busy operations in Worcester. Salary on the role is up to £48k per annum. The role is Monday to Thursday 8.30am to 5pm and then Friday 8.30am to 1pm. Key responsibility of the role The Installation and Commissioning Engineer is responsible for the on-site installation, testing, commissioning and handover of systems and equipment to ensure they meet design specifications, safety standards, and customer requirements. The role involves close collaboration with project managers, design teams, and clients to deliver projects on time and to a high standard of quality. Responsibilities and duties Install, configure, and commission equipment and systems according to engineering drawings, specifications, and project plans Perform pre-commissioning checks, functional testing, and performance verification Diagnose, troubleshoot, and resolve technical issues during installation and commissioning Ensure all work complies with health, safety, environmental, and quality standards Liaise with customers, contractors, and internal teams during site activities Produce commissioning reports, test documentation, and as-built records Provide technical support and training to customers and operators as required Participate in factory acceptance tests (FAT) and site acceptance tests (SAT) Support system upgrades, modifications, and corrective maintenance when needed Travel to customer sites as required, including occasional international travel Experience and knowledge required Proven experience in installation, commissioning, or field engineering roles Strong understanding of electrical/mechanical systems, controls, and instrumentation Knowledge of engine test and component test related equipment Understanding of PLC software and troubleshooting using diagnostics tools (Siemens S7 preferable) Integrating control technology into mechanical assemblies Calibration of instruments Fluid systems of solid and flexible pipes and fittings including- fuel systems, petrol and diesel, water systems for engine systems, oil systems, pressure testing and lead detection, filtration, flow, temperature and pressure testing Pneumatics systems knowledge (hard piping, flexible hoses and plastic tubing) Able to read technical engineering drawings Able to travel nationally and internationally to client sites Clean driving license Good time management and organisational abilities Expenses to be paid by the company, a phone, a laptop and a car provided. Free parking available on site at headquarters in Worcester, training and progression opportunities to be provided The role is based in Worcester so would be commutable from Droitwich, Redditch, Bromsgrove, Kidderminster, Alcester, Birmingham, Solihull, Tewkesbury, Evesham

Operations Manager Location: Kettering, Northamptonshire Salary: Up to £50,000 per annum (DOE) Hours: 37.5 hours per week Benefits 25-30 days annual leave (service related) Life assurance Group personal pension Income protection Free on-site parking Flexible working hours Potential for international travel The Company Our client is a long-established and highly respected UK-based engineering and manufacturing business with over 100 years of heritage. Originally founded to set technical standards within a specialist manufacturing sector, the organisation has evolved into a global provider of high-quality testing equipment and technical solutions. Operating from a modern manufacturing facility in Northamptonshire, the business designs, manufactures and exports precision physical testing machinery to leading brands worldwide, supporting quality and performance standards across multiple industries. The Role The Operations Manager will take full responsibility for the end-to-end coordination of production, service, logistics and operational delivery. The focus of the role is to ensure customer commitments are achieved on time, to the required quality standards and within agreed margin expectations. This is a hands-on leadership role requiring a strong engineering background, proven production management experience and sound commercial awareness. The successful candidate will act as the key link between engineering, production, sales and customers, ensuring that sold projects are delivered profitably, efficiently and reliably. The role also includes a customer-facing element and will contribute operational and technical insight into business development and strategic marketing activities. Key Responsibilities Operational Delivery & Planning Own and continuously improve end-to-end delivery performance from order acceptance through to shipment, installation, commissioning and service Lead integrated planning across sales, engineering, production, service and procurement to ensure clear visibility of priorities, capacity and risk Act as escalation point for delivery issues, ensuring early communication and effective mitigation Production & Service Oversight Lead and support team leaders across: Mechanical production and assembly Electrical build, calibration and commissioning Global service and technical support Logistics and order fulfilment Ensure all production, calibration and service activities follow agreed processes and quality standards Maintain clear logging and escalation processes for design, supplier or manufacturing defects Commercial & Financial Performance Deliver financial objectives through effective operational decision-making Reduce avoidable cost leakage through improved planning, sourcing feedback and make-versus-buy decisions Collaborate closely with Sales, Engineering and Procurement to ensure commercially robust project delivery Report on operational financial performance against budget Customer & Market Engagement Act as senior operational contact for key customers, reinforcing confidence in delivery and service performance Support the development of service offerings, training, upgrades and aftermarket opportunities Provide operational and technical input into marketing materials and product positioning Leadership & Team Development Lead, coach and develop team leaders to improve planning discipline, accountability and performance Promote a commercially aware and customer-focused culture across production and service teams Support skills development, training documentation and succession planning Continuous Improvement Improve operational consistency while maintaining a pragmatic, non-bureaucratic approach Ensure effective feedback loops between production, service and engineering teams Drive ongoing operational efficiency and process improvements About You Essential Engineering background (mechanical and/or electrical) Proven experience in production or operations management within a manufacturing environment Experience leading technical or production teams Strong planning, coordination and problem-solving skills Commercial awareness with understanding of margin and cost control Confident communicator, comfortable engaging with both internal teams and customers Experience working within a low-volume, high-value manufacturing environment Desirable Experience within test equipment, machinery or capital equipment manufacturing Exposure to commissioning, calibration or field service operations Customer-facing or account support experience Involvement in product development or business development activities Knowledge of CE/UKCA or regulated machinery environments Experience managing subcontract manufacturing

We believe in better. And we make it happen. Better content. Better products. And better careers. Working in Tech, Product or Data at Sky is about building the next and the new. From broadband to broadcast, streaming to mobile, Sky Q to Sky Glass, we never stand still. We optimise and innovate. We turn big ideas into the products, content and services millions of people love. And we do it all right here at Sky. As a key member of the UK Production Engineering support team, you'll play a vital role in ensuring the smooth operation of Sky's television production facilities. From maintaining graphics systems and managing data workflows to troubleshooting complex video and audio issues, you'll be at the heart of our live and post-production environments. Supporting flagship channels such as Sky News, Sky Sports News, and major sporting productions, you'll combine technical expertise with proactive problem-solving to keep broadcasts running seamlessly. What you'll do Provide reactive first line support to Sky's TV Production, Graphics and Post Production Facilities, such as Sky News, Sky Sports News, F1, Football, Cricket, EFL, Golf, Tennis, Racing, Netball, Rugby and many other key productions Work a regular shift pattern Provide reactive, logical, and methodical fault finding to a broad variety of faults found across a large Television Production & Post Production facility Create & update tickets for every task, working these through to resolution Learn and grow on the job, getting involved in traditional broadcast solutions but also having a keen eye on the future of broadcasting Proactive maintenance & monitoring of hardware, software and mechanical systems in a broadcast environment What you'll bring A degree or equivalent qualification in Broadcast Engineering, Media Technologies, or similar. A reasonable understanding of the technical elements of a broadcast tv chain - encompassing both older traditional and more modern IP, Software solutions Previous experience working in a support role within Broadcast Engineering A highly effective, positive, and influential communication style; demonstration of excellent people skills, communication skills, and coaching Understanding of Broadcast IP standards and implementation including SMPTE 2022, SMPTE 2110, AoIP (AES67) and PTP Competency with IT and computer networking Proven experience with Log interrogation A structured and analytical mindset when diagnosing technical problems - through logical reasoning and systematic troubleshooting Shift Pattern You will be required to work a shift pattern that covers a 7-day fortnight. This would normally be comprised of Week 1- Mon, Tue, Fri, Sat, Sun / Week 2 - Wed, Thu 12-hour days with one-hour break and on an early/late rotation. This would lead onto night shift cover later down the line covering the wider team responsibilities. The rewards There's one thing people can't stop talking about when it comes to : the perks. Here's a taster: "Access to free NOW, for streaming all your favourite shows A generous pension package Private healthcare Discounted mobile and broadband Content technology and innovation Our Content Technology and Innovation team delivers high-quality content to homes, customer devices, businesses and commercial partners across our European markets. With over 2500 colleagues from around the world, we combine our strategic insights, engineering know-how and operational excellence to use the most innovative technologies to create and distribute our award-winning content! Inclusion & how you'll work We are a Disability Confident Employer, and welcome and encourage applications from all candidates. We will look to ensure a fair and consistent experience for all, and will make reasonable adjustments to support you where appropriate. Please flag any adjustments you need to your recruiter as early as you can. Your office space Our Osterley Campus is a 10-minute walk from Syon Lane train station. Or you can hop on one of our free shuttle buses that run to and from Osterley, Gunnersbury, Ealing Broadway and South Ealing tube stations. There are also plenty of bike shelters and showers. On campus, you'll find 13 subsidised restaurants, cafes, and a Waitrose. You can keep in shape at our subsidised gym, catch the latest shows and movies at our cinema, get your car washed, and even get pampered at our beauty salon. We'd love to hear from you Inventive, forward-thinking minds come together to work in Tech, Product and Data at Sky. It's a place where you can explore what if, how far, and what next. But better doesn't stop at what we do, it's how we do it, too. We embrace each other's differences. We support our community and contribute to a sustainable future for our business and the planet. If you believe in better, we'll back you all the way. Just so you know: if your application is successful, we'll ask you to complete a criminal record check. And depending on the role you have applied for and the nature of any convictions you may have, we might have to withdraw the offer

Field Service Engineer - South West Based Location: South West Region Working days: Monday - Friday Salary: up to £40,000 (DOE) Benefits: Company vehicle and fuel card provided, profit-related bonus Contract: Full Time & Permanent Our client, a leading provider of technical solutions, is seeking a Field Service Engineer to join their team, primarily based in the South West of the UK. The role requires regular national travel, with potential overseas working opportunities once settled and experienced in the role. This is an exciting opportunity to work directly with customers, providing technical expertise, hands-on support, and problem-solving in a varied and rewarding role. Key Responsibilities: Service, maintain, and troubleshoot technical systems on-site Build and maintain strong relationships with customers and on-site staff Assist with system installation and commissioning (dependent on qualifications) Complete accurate service reports and documentation Contribute to service improvement initiatives and uphold high customer care standards Follow all health & safety policies and procedures Candidate Requirements: Qualified electro-mechanical engineer with multi-disciplined experience Previous field service or technical support experience advantageous Strong customer service focus and problem-solving skills Excellent verbal and written communication IT competent, especially MS Office GCSE (or equivalent) in English and Maths Full UK driving license and willingness to travel nationally; overseas opportunities available once settled and experienced How to Apply If you're interested in this opportunity, please apply online or contact Josh McQuaid at Pertemps, Bristol.

Site Manager - Sprinkler Projects (London) (contract) We are currently looking for an experienced Site Manager to oversee commercial sprinkler installation projects across London . This is a long-term contract opportunity with the potential to move into a permanent position . Role Overview The successful candidate will be responsible for managing sprinkler installation works on large-scale commercial projects , ensuring works are delivered safely, on schedule, and to a high standard. Key Responsibilities Managing day-to-day site operations for sprinkler installation projects Coordinating subcontractors, labour, and materials Ensuring all works comply with health & safety regulations Liaising with clients, project managers, and engineers Monitoring progress and maintaining project timelines Conducting site meetings and reporting project updates Ensuring installation works meet required standards and specifications Requirements SMSTS certification CSCS Card Experience managing sprinkler or fire protection installation projects Background in mechanical, fire protection, or M&E projects Strong leadership and site coordination skills Package Competitive day rate / salary Long-term commercial projects London-based projects Potential for permanent placement Immediate starts available. Call Ashleigh on to find out more.

Job Title: Maintenance Technician (Electrical Bias) Location: Hinckley Pay Rate: £14.00 per hour Contract: Ongoing Temporary Hours: Monday - Thursday 7:30am - 4:00pm Friday 7:30am - 12:30pm We are currently recruiting for a skilled and proactive Maintenance Technician to join a well-established automotive manufacturer based in Hinckley. This is an ongoing temporary position offering stable hours and the opportunity to work across a wide range of specialist machinery and equipment. The Role This is a varied, hands-on maintenance position where no two days are the same. You will play a key role in keeping production running smoothly by carrying out both reactive and planned maintenance across the site. While this role has a strong electrical bias (ideally suited to someone who has trained as an electrician), you will also be expected to assist with mechanical repairs and general site maintenance tasks. Key Responsibilities Electrical fault finding, repair and installation work Maintenance and repair of production machinery including presses, CNC machines, sewing machinery and upholstery equipment Mechanical maintenance and troubleshooting General site maintenance including plumbing and basic carpentry tasks Supporting planned preventative maintenance schedules Working closely with the site team to resolve breakdowns efficiently Contributing ideas for continuous improvement Working independently when required and taking ownership of tasks About You Electrical background essential - ideally apprenticeship-trained electrician Experience in manufacturing or industrial maintenance preferred Comfortable working on a variety of machinery and mechanical systems Willing to turn your hand to general maintenance tasks beyond your core trade Proactive, practical and solution-focused Able to work both independently and as part of a small team Good communication skills and a collaborative approach What's on Offer £14.00 per hour Ongoing temporary contract Early finish every Friday Opportunity to work within a diverse and dynamic manufacturing environment Exposure to both automotive and aerospace production equipment If you're a hands-on maintenance professional with strong electrical skills and a flexible, team-focused approach, we'd love to hear from you.

Multiskilled Maintenance Technician with mechanical bias sought by a recycling facility in Runcorn. This subsidiary of an international, £multibillion turnover plastics manufacturer is focused on growing the circular economy and they see innovation within PVC recycling as pivotal to their global sustainability strategy. This is a permanent role on weekly rotating shifts, 6am to 2pm and 2pm to 10pm, known formally within the business as Mechanical Technician. The Role: As a Multiskilled Maintenance Technician with mechanical bias, you'll be working as part of a team on the installation, maintenance and troubleshooting of bearing replacements conveyor belts, motor gearbox replacements, electrical and instrumentation equipment in compliance with industry regulations, Health & Safety standards, and company procedures. Your duties will include: Carrying out mechanical tasks as part of a multifunctional team: bearing replacements conveyor belts, motor gearbox replacements Carrying out TPM tasks to ensure maximum OEE is achieved Participating in continuous improvement initiatives, identifying opportunities to enhance system reliability and efficiency Working closely with engineers, production teams and external contractors to ensure timely resolution of issues Following strict Health & Safety guidelines, conducting risk assessments and ensuring compliance with safe work practices Working as part of a team installing, calibrating and maintaining electrical and instrumentation systems including motors, sensors, actuators, PLCs and control panels Troubleshooting: diagnosing and repairing electrical and instrumentation faults on a variety of systems Performing routine testing, calibration and validation of instrumentation and control systems to ensure optimal performance Accurately maintaining records of all electrical and instrumentation work: maintenance logs, calibration reports, work orders and spare parts stores management Ensuring all work complies with relevant legislation, including Electricity at Work Regulations, IEE Wiring Regulations (BS 7671) and company policies Working on a shift pattern or 6am-2pm and 2pm-10pm, rotating on a weekly basis The successful Multiskilled Maintenance Technician will demonstrate: NVQ Level 3 in Engineering or equivalent Strong mechanical engineering bias with some electrical experience Excellent communication skills Excellent problem-solving and diagnostic skills Ability to work independently and within a team Strong organisational skills and attention to detail Proficiency with electrical drawings and schematics The following skills and experience are desirable but not essential: 18th Edition IEE Wiring Regulations (BS 7671) City & Guilds 2391 (Inspection & Testing) or equivalent Demonstrable experience in an electrical and instrumentation role, across multiple sectors including manufacturing, industrial, energy, or related industries Strong knowledge of electrical systems, control systems, and instrumentation technologies Instrumentation certification COMPEX certification Experience working in hazardous environments (ATEX) Familiarity with DCS (Distributed Control Systems) Experience with PLCs, SCADA systems, and automation is advantageous Benefits: £41,671.61 including shift allowance and bonus - see below £36,683.28 base salary (£18.87 hourly rate) 10% shift allowance (after completing probation) £60 per month attendance bonus £50 per month production target bonus Time off in lieu Pension scheme Free flu jabs Health & wellbeing 32 days holidays including bank holidays, rising to 33 days after 2 years' service Option to buy and sell holiday Cycle to Work scheme Long service awards Company rewards platform Employee assistance programme Internal training academy Access to external training and supported education Social culture and events Multiskilled Maintenance Technician - Mechanical Bias Runcorn, Cheshire £41,671.61 (£36,683.% shift allowance £1,320 bonus) excellent benefits Mechanical Engineer Mechanical Technician Maintenance Technician Maintenance Engineer Mechanical Maintenance Multiskilled Multi Skilled Plant Engineer Plant Technician Electrical Engineer Electrical Maintenance Instrumentation Engineer

Description The M&E Regional Lead ensures all electrical and mechanical works within Pulsant's Southern region data centres are delivered safely, compliantly and to Pulsant's required standards. Leading a small team of engineers acting as Authorised Persons (APs), the role includes performing Senior AP duties and providing technical leadership across all M&E activity. The Southern region includes Maidenhead, Reading, Fareham and Croydon and we are flexible as to where this candidate will be based. Key responsibilities: Oversee high and critical risk mechanical and electrical operations, maintenance, and energy management programmes. Ensure all works adhere to Pulsant's safe systems of work and minimise operational risk. Provide technical leadership and support to Data Centre Managers. Review and approve high and critical risk change requests and participate in CAB as required. Perform HV and LV Senior Authorised Person duties. Lead training and development programmes for regional M&E engineers. Maintain compliance across all sites, including statutory requirements (PSSR, LOLA, L8, F Gas, etc.). Support incident response activities and subsequent root cause analysis. Manage the regional operational risk register and associated controls. Support asset lifecycle planning and influence CAPEX requirements. Contribute to preventive maintenance programme improvements. Identify and implement technical enhancements to improve building operations. Act as a primary technical resource for site engineers and management teams. Travel between sites as required, with occasional out of hours availability. What / who we're looking for: Experienced senior engineer, with supervisory experience Experience maintaining and repairing mission critical infrastructure and operations, including cooling and power systems (e.g. stand by generators) Data centre industry experience is desirable but not essential Recognised formal electrical training (e.g., City & Guilds) Full UK driving licence. Pulsant offers: A supportive work environment with a focus on career growth, development, work life balance and well-being. A friendly, family-like atmosphere where almost half of the team have been with Pulsant for 5+ years Benefits include 5% pension, private healthcare, electric vehicle scheme, cycle to work scheme, free breakfast and snacks, Udemy license and more. To hear more about working at Pulsant check out: on LinkedIn and Instagram About Pulsant Pulsant is a leading UK digital infrastructure provider, offering innovative edge infrastructure solutions through our PlatformEdge. With 14 strategically located data centres and a dedicated team of over 300 professionals (with an average tenure of 7 years), we support 1000+ clients services across the UK with cloud, connectivity, and compute services. Equal opportunity employer statement: At Pulsant, we are committed to creating a supportive and inclusive environment where everyone feels valued and has a strong sense of belonging. We want all individuals to feel respected, heard, and empowered to contribute and succeed. If there is any way we can support you-such as providing reasonable accommodations during the application or interview process-please note this in your application, or reach out to us by email: Work Location: In person

Mechanical Design Engineer Mechanical Design Engineer (Junior applications with upwards of 1 years experience will be seriously considered) Fully REMOTE role - Location not a barrier!Please note: This client is unable to offer visa sponsorship.Starting salary depending on experience. Benefits include: Track record of promotions within the business- ideal for ambitious Electrical Designers Backing for industry accreditations and memberships Private healthcare Birthday off Brilliant company social events Computer provided Desk and chair provided if required Plus more This Mechanical Design Engineer opportunity is for a credible MEP Building Services Consultancy that specialises in high end residential projects (Making up approximately 70% of their work) alongside commercial work, including healthcare (Which takes up around 30%). Mechanical Design Engineer- What's required: Experience in a Mechanical Design Engineer role, within the Building Services industry Working knowledge of UK Building Regulations, British Standards and CIBSE guidance Confident producing heating and cooling loads using IES VE Experience carrying out pipework sizing calculations Understanding of low carbon systems including ASHPs and district heating networks We are interviewing Mechanical Design Engineers ASAP, so please apply to register your interest. Please call Hannah on for more details on this Mechanical Design Engineer vacancy.

Multi Skilled Maintenance Engineer Reigate - RH2 Full Time £40,000 - £43,000 Plus O/T + Flexible Benefits, Plus on call (1-3) Summary NG Bailey Facilities Services are recruiting a Multi Skilled Maintenance Engineer to support our contract based in Reigate providing PPM and reactive maintenance. The successful candidate will have a background in both Mechanical & Electrical maintenance with relevant and current qualifications. Some of the key deliverables in this role will include: Complete fault finding & repair of a range of electrical & mechanical plant & equipment. Responsibly for diagnosing and rectifying mechanical & electrical plant faults, ensuring all statutory requirements are maintained. Effective servicing, fault diagnosis & repair work of HVAC equipment to current standards. Submission of clear, concise & accurate reports of work carried out. Comfortable in the use of computers and PDA's. Monday to Friday , you will be required to go on the team call out rota (1-3) Standby payment paid whilst on call What we're looking for : An experienced technician working to a high standard of building services provision (planned and reactive) within a commercial occupied environment and with the utmost regard for customer service this is a role for you. You will hold current qualifications to work as multi-skilled technician including. Previously working / working as a multi-skilled maintenance service engineer within the commercial sector, undertaking routine plant repairs & maintenance. NVQ level 3 or equivalent qualification in Mechanical or Electrical Services 18th Edition (Desirable) Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: £40,000 -£43,000 Salary on offer, Plus Overtime available, Plus Call out Allowance 25 Days Holidays, plus Bank Holidays Sick Pay Pension with a leading provider and employer contribution Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give as You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.

As a Service Technician at Crawfords, you will be responsible for carrying out high-quality servicing, diagnostics, and repairs on a range of commercial vehicles, and motor vehicles. This role supports the smooth operation of the service department by ensuring work is completed efficiently, safely, and to manufacturer standards. You will diagnose mechanical, and electrical faults, perform routine maintenance, prepare vehicles for customer delivery, and complete detailed service reports. The role involves working closely with our service team, maintaining workshop standards, and delivering excellent customer service. As part of Crawfords commitment to reliability and professionalism, you will play a key part in upholding the company's reputation for expert engineering support. Key Responsibilities: Carry out scheduled service maintenance & inspection Carry out fault-finding and diagnosis of customer concerns and vehicle defects Complete pre-delivery inspections on new and pre-owned vehicles Promote dealership services & products to customers Service and repairs of ATV's & off-road / on road equipment Tyre replacements and wheel alignment Attend manufacturers' training courses Complete job cards & work orders using various software platforms Utilise laptop diagnostics and service systems - understanding of vehicle manufacturers wiring diagrams and technical documentation Work alongside and communicate with customers, colleagues, manufacturers, and suppliers Maintain a high standard of workshop housekeeping Provide training and mentorship to junior technicians and apprentices Understanding of BEV vehicles advantageous Experience and Attributes: Working on off road vehicles advantageous Own tooling will be required, special tooling will be supplied along with PPE A general level of computer literacy is required Can use your own initiative and are efficient with time Able to effectively communicate both written and verbally and be an active team member To adapt and take on new skills and approaches and participate in training and development activities To be flexible during busy times to work additional hours as required with the potential to go on a split shift pattern. Package & Benefits Salary Starting from: £37,000.00 per annum, negotiable with experience Working pattern flexible Potential to grow with an upcoming business 22 days holiday, plus 8 days Bank Holiday Company Pension Employee Assistance Programme Private Healthcare Plan Company and Team Events Job Type: Full-time Pay: From £37,000.00 per year Benefits: Company events Company pension Cycle to work scheme Employee discount On-site parking Experience: Automotive service: 1 year (required) Licence/Certification: Driving Licence (required) Work Location: In person Application deadline: 27/03/2026

Critical Infrastructure Project Estimator Location: Manchester Sector: Data Centres / Critical Infrastructure / M&E Hays are supporting a well-established and award-winning technical services contractor delivering complex M&E projects across the UK. With continued growth, a strong pipeline of secured work, and ambitious expansion plans, they are now seeking a Critical Infrastructure Project Estimator to join their expanding team. This is an excellent opportunity to join a specialist contractor operating at the forefront of data centre and mission-critical infrastructure delivery. The Role Working within the Critical Infrastructures Division, you will play a key role in securing new business by providing robust, accurate, and commercially sound estimates for complex M&E projects.You will be responsible for pricing major elements including: Electrical systems and critical power infrastructure Main items of plant Mechanical, electrical and fabric subcontract packages Long-lead and specialist equipment This role requires strong technical understanding, commercial awareness, and the ability to identify both risks and opportunities within tender documentation. Key Responsibilities Issuing subcontract and material enquiries Attending site visits and liaising with clients and supply chain partners Reviewing and scrutinising drawings and specifications Carrying out detailed take-offs Risk and opportunity identification Reviewing subcontractor submissions for technical compliance Contributing to value engineering proposals Inputting into programme and lead time analysis Preparing final tender documentation for director sign-off Assisting with formal tender submissions About You Proven experience estimating within Electrical / Building Services / Critical Infrastructure Experience delivering successful tenders in data centres, comms rooms, or similar environments A strong understanding of electrical systems and construction methodologies Minimum 2 years' experience in an M&E estimating role or experience estimating in similar roles Experience using estimating software (Trimble advantageous) HNC/HND or Degree in Electrical or Building Services (desirable) Full UK driving licence Security Clearance would be beneficial but is not essential What's on Offer £60,000 salary with company car 25 days annual leave + bank holidays Supportive and collaborative office environment Opportunity to join a growing, ambitious contractor Exposure to complex and technically challenging projects Strong pipeline of secured and upcoming work Career progression within a specialist, expanding division What you need to do now If you are an experienced M&E Estimator, looking to specialise further within data centres and critical environments, this represents an excellent opportunity to join a highly respected contractor during an exciting phase of growth.For a confidential discussion, please get in touch on and ask for Shane Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Assembly Technician / Mechanical Fitter / Assembler Join a precision manufacturing environment assembling and testing high-spec components for the aerospace and defence sectors. This hands-on role involves mechanical assembly, drilling, riveting and quality-focused production engineering processes. If you've also worked in the following roles, we'd also like to hear from you: Manufacturing Operative, Production Technician, Engineering Operative, Mechanical Assembly Technician SALARY: Competitive Depending on Experience + Benefits LOCATION: Sutton-in-Ashfield, Nottinghamshire, East Midlands JOB TYPE: Full-Time, Permanent WORKING HOURS: 39 Hours per Week, 07:30 - 16:30 Monday to Thursday, 07:30 - 12:30 Friday JOB OVERVIEW We have a fantastic new job opportunity for an Assembly Technician / Mechanical Fitter / Assembler within a well-established manufacturing organisation supplying components to the aerospace and defence sectors. Working in a modern production facility, the Assembly Technician / Mechanical Fitter / Assembler will carry out precision mechanical assembly and testing of finished assemblies and sub-assemblies to engineering drawings and bills of materials, ensuring quality assurance and compliance with industry standards. As an Assembly Technician / Mechanical Fitter / Assembler you will use a range of manufacturing techniques including drilling, bonding, riveting and torque testing, contributing to high-quality production processes in a fast-paced engineering environment. APPLY TODAY Ready to make your next career move? Apply Now for our Recruitment Team to review. DUTIES Your duties as the Assembly Technician / Mechanical Fitter / Assembler include: Mechanical Assembly: Assemble finished assemblies and sub-assemblies in line with specifications and bills of materials Technical Drawing Interpretation: Read and work accurately from engineering and technical drawings Drilling And Match Drilling: Carry out drilling and match drilling operations to required tolerances Counter Sinking: Perform precision drilling and counter sinking tasks Adhesive Bonding: Complete adhesive bonding processes in line with production standards Helicoiling And Fastening: Install helicoils and carry out bolting and torque testing procedures Riveting Operations: Undertake pot riveting and solid riveting activities Sealing And Assembly: Perform wet and dry assembly and over sealing tasks Electrical Bonding And Testing: Conduct electrical bonding and associated testing Pressure Testing: Complete pressure testing to required quality and safety standards CANDIDATE REQUIREMENTS Previous experience in mechanical assembly within a manufacturing or production environment A background in aerospace, nuclear, medical, high-end automotive or motorsport sectors Ability to read and interpret technical drawings and engineering documentation Experience with drilling, riveting, bonding and torque testing processes Understanding of quality assurance standards such as AS9100 or EASA Part 21 (G) is desirable Strong teamwork skills with the ability to multitask in a fast-paced environment Flexible approach with a proactive, 'can do' attitude Ideally located within a reasonable commuting distance of Sutton-in-Ashfield HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. CV's of Job Applicants meeting this requirement will be submitted to our Client for consideration. By submitting your job application to us you are hereby giving us your express consent to submit your details to our Client for this purpose. JOB REF: AWDO-P14449 Full-Time, Permanent Jobs, Careers and Vacancies. Find a new job and work in Sutton-in-Ashfield, Nottinghamshire, East Midlands. Multi-Job Board Advertising and CV Sourcing Recruitment Services provided by AWD online. AWD online specialise in sourcing candidates and advertising vacancies on multiple job boards for companies on a non-commission basis. AWD online operates as an employment agency. awd online