hackajob is collaborating with Leonardo to connect them with exceptional professionals for this role. Job Description: Salary: £55k to £65k Leonardo UK operates a grade-based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity. At Leonardo in Yeovil we are seeking an experienced Software Engineer - Mission Management Systems to drive the end-to-end development of high-integrity aircraft software during a critical technical pivot. This role focuses on the evolution of our Tactical Mission Management Systems-maintaining the reliability of our legacy manned platforms while architecting the software for our emerging uncrewed and autonomous capabilities. Your impact Working within our Helicopter division, you will be taking ownership of complex mission system software component, ensuring legacy systems remain robust, while simultaneously leveraging open architectures to ensure our future uncrewed systems are modular, portable, and ready for the next generation of autonomous missions. What you'll do as Software Engineer - Mission Management Systems Dual-Platform Architecture: Generate robust, scalable software models and detailed component designs using UML for both legacy manned and new uncrewed mission computers. Open Architecture Integration: Champion the use of Modular Open Systems Approaches (e.g., FACE/MOSA ) to ensure future software portability across autonomous fleets. High-Integrity Implementation: Develop deterministic, mission-critical real-time software components (primarily in Ada95/C/C++ ), balancing the need for rigorous memory management with the processing demands of autonomous systems. Requirements & Traceability: Capture, analyse, and manage complex system requirements, ensuring traceability using DOORS across both manned and unmanned capability drops. Verification & Integration: Construct test harnesses, execute unit testing, and conduct hardware-in-the-loop integration to prove both traditional HMI functionality and complex autonomous behaviours. Navigating Certification: Produce and maintain standard engineering documentation. You will ensure legacy systems meet DO-178C requirements while actively helping the team navigate the emerging regulatory and certification hurdles associated with uncrewed systems. Cross-Functional Leadership: Act as a technical authority during discussions with customers, suppliers, and multi-disciplinary teams to ensure autonomous and legacy software delivers the required operational capability within agreed budgets. What you'll bring: Experience: Broad experience in the full software development lifecycle for real-time, high-integrity embedded systems. Core Technical Stack: Strong proficiency in Ada95, C, or C++ . Extensive experience with UML modelling and requirements management via DOORS . Operating Environments: Deep understanding of Real-Time Operating Systems (RTOS), multi-tasking environments, and command-based OS (Linux, UNIX). Regulatory Mindset: Practical experience navigating traditional safety standards (like DO-178C), coupled with a strong appetite for tackling the unique integration and certification challenges of autonomous systems. Mindset: A proactive architect who thrives in a transitional environment, capable of respecting the rigor of manned aviation while innovating for the uncrewed future. It would be great if you bring specific knowledge or a strong interest in any of the following areas: Advanced Architecture: Integrated Modular Avionics (IMA), Modular Open Systems Approach (MOSA), Future Airborne Capability Environment (FACE), and Model-Based Systems Engineering (MBSE / SysML). Autonomy & Future Tech: Exposure to autonomous flight rules, robotics/automation technologies, AI/Machine Learning, or modern languages (Rust, C#, Java) as they apply to future uncrewed mission systems. Tactical Domain: Military Tactical Communication, Sensor, and Weapon systems integration for both crewed and uncrewed platforms. Avionics & Hardware: Integration with Aircraft Electrical Systems and networking protocols (IP/Ethernet, Mil-Std 1553, ARINC429). This is not an exhaustive list, and we are keen to hear from you even if you might not have experience in all the above. The most important skill is a good attitude and willingness to learn. Security Clearance This role will require National Security Vetting to SC level. It is a requirement that the successful applicant will undergo, achieve, and maintain SC Clearance. A range of Personnel Security Controls referred to as National Security Vetting (NSV) will apply, this will include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: Why join us At Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work-life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we're here to help you thrive. Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year. Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution. Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity). Rewarding Performance : All employees at management level and below are eligible for our bonus scheme. Never Stop Learning : Free access to 4,000+ online courses via Coursera and LinkedIn Learning. Refer a friend: Receive a financial reward through our referral programme. Tailored Perks : Spend up to £500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more. Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role. For a full list of our company benefits please visit our website. Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team-they are key contributors to shaping innovation, advancing technology, and enhancing global safety. At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know. Be part of something bigger - apply now! Primary Location: GB - Yeovil - Lysander Rd Contract Type: Permanent Hybrid Working: Hybrid
Jul 15, 2026
Full time
hackajob is collaborating with Leonardo to connect them with exceptional professionals for this role. Job Description: Salary: £55k to £65k Leonardo UK operates a grade-based salary framework with broad bands. The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market. Exceptions above the standard range are managed through governance controls to protect internal equity. At Leonardo in Yeovil we are seeking an experienced Software Engineer - Mission Management Systems to drive the end-to-end development of high-integrity aircraft software during a critical technical pivot. This role focuses on the evolution of our Tactical Mission Management Systems-maintaining the reliability of our legacy manned platforms while architecting the software for our emerging uncrewed and autonomous capabilities. Your impact Working within our Helicopter division, you will be taking ownership of complex mission system software component, ensuring legacy systems remain robust, while simultaneously leveraging open architectures to ensure our future uncrewed systems are modular, portable, and ready for the next generation of autonomous missions. What you'll do as Software Engineer - Mission Management Systems Dual-Platform Architecture: Generate robust, scalable software models and detailed component designs using UML for both legacy manned and new uncrewed mission computers. Open Architecture Integration: Champion the use of Modular Open Systems Approaches (e.g., FACE/MOSA ) to ensure future software portability across autonomous fleets. High-Integrity Implementation: Develop deterministic, mission-critical real-time software components (primarily in Ada95/C/C++ ), balancing the need for rigorous memory management with the processing demands of autonomous systems. Requirements & Traceability: Capture, analyse, and manage complex system requirements, ensuring traceability using DOORS across both manned and unmanned capability drops. Verification & Integration: Construct test harnesses, execute unit testing, and conduct hardware-in-the-loop integration to prove both traditional HMI functionality and complex autonomous behaviours. Navigating Certification: Produce and maintain standard engineering documentation. You will ensure legacy systems meet DO-178C requirements while actively helping the team navigate the emerging regulatory and certification hurdles associated with uncrewed systems. Cross-Functional Leadership: Act as a technical authority during discussions with customers, suppliers, and multi-disciplinary teams to ensure autonomous and legacy software delivers the required operational capability within agreed budgets. What you'll bring: Experience: Broad experience in the full software development lifecycle for real-time, high-integrity embedded systems. Core Technical Stack: Strong proficiency in Ada95, C, or C++ . Extensive experience with UML modelling and requirements management via DOORS . Operating Environments: Deep understanding of Real-Time Operating Systems (RTOS), multi-tasking environments, and command-based OS (Linux, UNIX). Regulatory Mindset: Practical experience navigating traditional safety standards (like DO-178C), coupled with a strong appetite for tackling the unique integration and certification challenges of autonomous systems. Mindset: A proactive architect who thrives in a transitional environment, capable of respecting the rigor of manned aviation while innovating for the uncrewed future. It would be great if you bring specific knowledge or a strong interest in any of the following areas: Advanced Architecture: Integrated Modular Avionics (IMA), Modular Open Systems Approach (MOSA), Future Airborne Capability Environment (FACE), and Model-Based Systems Engineering (MBSE / SysML). Autonomy & Future Tech: Exposure to autonomous flight rules, robotics/automation technologies, AI/Machine Learning, or modern languages (Rust, C#, Java) as they apply to future uncrewed mission systems. Tactical Domain: Military Tactical Communication, Sensor, and Weapon systems integration for both crewed and uncrewed platforms. Avionics & Hardware: Integration with Aircraft Electrical Systems and networking protocols (IP/Ethernet, Mil-Std 1553, ARINC429). This is not an exhaustive list, and we are keen to hear from you even if you might not have experience in all the above. The most important skill is a good attitude and willingness to learn. Security Clearance This role will require National Security Vetting to SC level. It is a requirement that the successful applicant will undergo, achieve, and maintain SC Clearance. A range of Personnel Security Controls referred to as National Security Vetting (NSV) will apply, this will include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: Why join us At Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work-life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we're here to help you thrive. Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year. Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution. Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity). Rewarding Performance : All employees at management level and below are eligible for our bonus scheme. Never Stop Learning : Free access to 4,000+ online courses via Coursera and LinkedIn Learning. Refer a friend: Receive a financial reward through our referral programme. Tailored Perks : Spend up to £500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more. Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role. For a full list of our company benefits please visit our website. Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team-they are key contributors to shaping innovation, advancing technology, and enhancing global safety. At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know. Be part of something bigger - apply now! Primary Location: GB - Yeovil - Lysander Rd Contract Type: Permanent Hybrid Working: Hybrid
Senior Automation Engineer Location: Outskirts of Edinburgh (flexible work pattern and compressed week) Employment: Permanent: up to £60k Hours: 37 hours per week Overview We are working with a leading advanced manufacturing and defence organisation seeking a Senior Automation Engineer to deliver innovative automation solutions across complex production environments. This role offers the opportunity to lead end-to-end automation projects, driving improvements in efficiency, quality, and safety within highly regulated industries. The Role You will be responsible for the design, development, and implementation of automated manufacturing systems, supporting projects from concept through to commissioning. Key Responsibilities Design and develop automated systems including PLCs, robotics, and SCADA Lead full lifecycle automation projects to improve cycle time, cost, and safety Program and optimise PLCs (Siemens, Allen Bradley), robots (Fanuc, ABB, Kuka), and HMI/SCADA systems Commission robotic cells and assembly systems, ensuring compliance with industry standards (e.g. ISO 9001 / AS9100) Integrate shop-floor systems with MES and ERP platforms Develop automated workflows and manufacturing recipes (ISA-88 / ISA-95) Support data-driven manufacturing through KPI dashboards and reporting Conduct root cause analysis and drive continuous improvement Skills & Experience Degree in Engineering (Mechanical, Electrical, Controls or similar) Proven experience in industrial automation within manufacturing environments Strong knowledge of PLC programming (Siemens S7 / TIA Portal preferred) and robotics Experience integrating MES (e.g. Syncade, Opcenter) and ERP systems Familiarity with industrial communication protocols (e.g. OPC UA, Ethernet/IP) Experience working in regulated industries such as Life Sciences, Aerospace & Defence, or FMCG Desirable Programming/scripting skills (Python, Java, C++, PowerShell or Bash) Experience with SQL, XML, or database systems Exposure to Infrastructure as Code or modern automation tooling Benefits for perm employee: Condensed 4 day working week bonus, overtime pay and flexible discounts and benefits.
Jul 14, 2026
Full time
Senior Automation Engineer Location: Outskirts of Edinburgh (flexible work pattern and compressed week) Employment: Permanent: up to £60k Hours: 37 hours per week Overview We are working with a leading advanced manufacturing and defence organisation seeking a Senior Automation Engineer to deliver innovative automation solutions across complex production environments. This role offers the opportunity to lead end-to-end automation projects, driving improvements in efficiency, quality, and safety within highly regulated industries. The Role You will be responsible for the design, development, and implementation of automated manufacturing systems, supporting projects from concept through to commissioning. Key Responsibilities Design and develop automated systems including PLCs, robotics, and SCADA Lead full lifecycle automation projects to improve cycle time, cost, and safety Program and optimise PLCs (Siemens, Allen Bradley), robots (Fanuc, ABB, Kuka), and HMI/SCADA systems Commission robotic cells and assembly systems, ensuring compliance with industry standards (e.g. ISO 9001 / AS9100) Integrate shop-floor systems with MES and ERP platforms Develop automated workflows and manufacturing recipes (ISA-88 / ISA-95) Support data-driven manufacturing through KPI dashboards and reporting Conduct root cause analysis and drive continuous improvement Skills & Experience Degree in Engineering (Mechanical, Electrical, Controls or similar) Proven experience in industrial automation within manufacturing environments Strong knowledge of PLC programming (Siemens S7 / TIA Portal preferred) and robotics Experience integrating MES (e.g. Syncade, Opcenter) and ERP systems Familiarity with industrial communication protocols (e.g. OPC UA, Ethernet/IP) Experience working in regulated industries such as Life Sciences, Aerospace & Defence, or FMCG Desirable Programming/scripting skills (Python, Java, C++, PowerShell or Bash) Experience with SQL, XML, or database systems Exposure to Infrastructure as Code or modern automation tooling Benefits for perm employee: Condensed 4 day working week bonus, overtime pay and flexible discounts and benefits.
Senior Controls Engineer Location: Clevedon, North Somerset Salary: Up to £53,000 per annum + Bonus Job Type: Full-time, Permanent Working Pattern: On-site Benefits & Package Package includes: Up to 7.5% annual bonus Up to 8% employer pension contribution Life assurance Health cash plan Wellbeing programme Discounted gym memberships 25 days holiday plus bank holidays Free parking & subsidised canteen About the Role We are looking for an experienced Senior Controls Engineer to join a growing engineering team, developing advanced control and visualisation software for innovative engineering products. Reporting to the Controls Engineering Manager, you'll take ownership of software design and specification, provide technical leadership, mentor junior engineers, and help drive continuous improvement across the controls engineering function. Key Responsibilities Design and develop PLC and HMI software for new and existing products. Produce and review software specifications and technical documentation. Carry out software testing, validation, and simulation activities. Support project planning and ensure engineering activities are delivered on time. Drive continuous improvement of controls engineering processes and standards. Investigate software quality issues and provide expert technical support. Produce software release documentation, manuals, and build notes. Mentor junior engineers and deliver technical training across the team. About You We're looking for an experienced Controls Engineer with a strong background in industrial automation and software development. You'll ideally have: HND, Degree, or equivalent qualification in Controls Engineering, Software Engineering, or a related discipline. At least five years' experience in controls and software engineering. Strong PLC programming experience, including Ladder Logic, Structured Text, Function Blocks, and Data Structures. HMI programming experience using VB.NET or similar high-level languages. Experience with Modbus communications, software configuration management, and technical documentation. Knowledge of P&ID drawings, electrical schematics, PID control loops, HAZOP, and FMEA. Excellent communication, analytical, and problem-solving skills. Ability to mentor colleagues and work effectively within multidisciplinary engineering teams. Desirable experience includes PLC hardware configuration, simulation tools, HTML5, JavaScript, ASP, functional safety systems, and SEMI industry standards. Location This is an on-site role based in Clevedon, North Somerset, working closely with multidisciplinary engineering teams. Occasional travel to customer sites and other engineering locations may be required. How to Apply Click Apply to submit your CV for consideration. If you have any questions about this opportunity, please contact Kirk at Pertemps, Bristol.
Jul 14, 2026
Full time
Senior Controls Engineer Location: Clevedon, North Somerset Salary: Up to £53,000 per annum + Bonus Job Type: Full-time, Permanent Working Pattern: On-site Benefits & Package Package includes: Up to 7.5% annual bonus Up to 8% employer pension contribution Life assurance Health cash plan Wellbeing programme Discounted gym memberships 25 days holiday plus bank holidays Free parking & subsidised canteen About the Role We are looking for an experienced Senior Controls Engineer to join a growing engineering team, developing advanced control and visualisation software for innovative engineering products. Reporting to the Controls Engineering Manager, you'll take ownership of software design and specification, provide technical leadership, mentor junior engineers, and help drive continuous improvement across the controls engineering function. Key Responsibilities Design and develop PLC and HMI software for new and existing products. Produce and review software specifications and technical documentation. Carry out software testing, validation, and simulation activities. Support project planning and ensure engineering activities are delivered on time. Drive continuous improvement of controls engineering processes and standards. Investigate software quality issues and provide expert technical support. Produce software release documentation, manuals, and build notes. Mentor junior engineers and deliver technical training across the team. About You We're looking for an experienced Controls Engineer with a strong background in industrial automation and software development. You'll ideally have: HND, Degree, or equivalent qualification in Controls Engineering, Software Engineering, or a related discipline. At least five years' experience in controls and software engineering. Strong PLC programming experience, including Ladder Logic, Structured Text, Function Blocks, and Data Structures. HMI programming experience using VB.NET or similar high-level languages. Experience with Modbus communications, software configuration management, and technical documentation. Knowledge of P&ID drawings, electrical schematics, PID control loops, HAZOP, and FMEA. Excellent communication, analytical, and problem-solving skills. Ability to mentor colleagues and work effectively within multidisciplinary engineering teams. Desirable experience includes PLC hardware configuration, simulation tools, HTML5, JavaScript, ASP, functional safety systems, and SEMI industry standards. Location This is an on-site role based in Clevedon, North Somerset, working closely with multidisciplinary engineering teams. Occasional travel to customer sites and other engineering locations may be required. How to Apply Click Apply to submit your CV for consideration. If you have any questions about this opportunity, please contact Kirk at Pertemps, Bristol.
Human Factors Consultant - Defence (Contract) Location: UK (Hybrid/Remote options available) Contract Length: Initial 6-12 Months Rate: £75 to £85 per hour Security Clearance: Current SC clearance desirable, or eligibility to obtain clearance We are seeking an experienced Human Factors Consultant to support a range of complex Defence programmes. Working alongside Systems Engineering, Safety, Design and Operational teams, you will deliver Human Factors and Human Systems Integration (HSI) activities that ensure military systems, platforms and equipment are safe, effective and optimised for end user performance in demanding operational environments. This is an excellent opportunity to contribute to high-profile Defence projects across land, maritime, air and joint domain systems. Key Responsibilities Deliver Human Factors Engineering (HFE) and Human Systems Integration (HSI) activities throughout the systems engineering lifecycle. Conduct Human Factors assessments to support requirements definition, system design, verification and validation. Perform Cognitive Task Analysis (CTA), Hierarchical Task Analysis (HTA), workload assessment and operational user analysis. Develop Human Factors artefacts including: Human Factors Integration Plans (HFIP) Human Factors Case Reports Human Error Identification and Reduction Analysis (HEIRA) Human Reliability Analysis (HRA) User Requirements Documentation Human-Machine Interface (HMI) Assessments Support system safety and safety case development through identification and mitigation of human performance risks. Evaluate operator workload, situational awareness, decision making and crew performance within mission critical environments. Conduct usability evaluations, trials, simulations and verification activities for Defence systems and equipment. Work closely with Systems Engineers, Safety Engineers, Designers and Operational Subject Matter Experts to integrate human centred design principles into system development. Contribute to design reviews and provide Human Factors recommendations to influence engineering decisions. Essential Experience Proven experience delivering Human Factors Engineering activities within Defence, Aerospace, Maritime, Nuclear, Rail or other safety critical industries. Strong understanding of Human Factors methodologies, analyses and assessment techniques. Experience supporting Systems Engineering and Safety Engineering activities throughout the project lifecycle. Knowledge of Human Machine Interface (HMI) design principles and operator centred system design. Experience conducting task analysis, workload assessment and human error analysis. Ability to produce technical reports and present findings to engineering and programme stakeholders. Strong stakeholder engagement and communication skills. Desirable Experience Experience working on MOD, Defence Prime or Government programmes. Knowledge of Human Systems Integration (HSI) frameworks. Familiarity with Defence Standards and relevant guidance, including: Def Stan 00-251 JSP 912 Human Factors Integration Defence Human Factors Integration Guidance ISO 6385 ISO 9241 Experience supporting Safety Cases and Hazard Analysis activities. Previous involvement in military platform, mission system, command and control, training system or complex equipment programmes. Current SC or DV Security Clearance. Key Words Human Factors, Human Factors Engineering, HFE, Human Systems Integration, HSI, Human Reliability Analysis, HRA, Human Error Analysis, Systems Engineering, Safety Engineering, Defence, MOD, Aerospace, Maritime, Mission Systems, Operator Performance, Cognitive Task Analysis, HTA, HMI, Safety Case, SC Clearance.
Jul 13, 2026
Full time
Human Factors Consultant - Defence (Contract) Location: UK (Hybrid/Remote options available) Contract Length: Initial 6-12 Months Rate: £75 to £85 per hour Security Clearance: Current SC clearance desirable, or eligibility to obtain clearance We are seeking an experienced Human Factors Consultant to support a range of complex Defence programmes. Working alongside Systems Engineering, Safety, Design and Operational teams, you will deliver Human Factors and Human Systems Integration (HSI) activities that ensure military systems, platforms and equipment are safe, effective and optimised for end user performance in demanding operational environments. This is an excellent opportunity to contribute to high-profile Defence projects across land, maritime, air and joint domain systems. Key Responsibilities Deliver Human Factors Engineering (HFE) and Human Systems Integration (HSI) activities throughout the systems engineering lifecycle. Conduct Human Factors assessments to support requirements definition, system design, verification and validation. Perform Cognitive Task Analysis (CTA), Hierarchical Task Analysis (HTA), workload assessment and operational user analysis. Develop Human Factors artefacts including: Human Factors Integration Plans (HFIP) Human Factors Case Reports Human Error Identification and Reduction Analysis (HEIRA) Human Reliability Analysis (HRA) User Requirements Documentation Human-Machine Interface (HMI) Assessments Support system safety and safety case development through identification and mitigation of human performance risks. Evaluate operator workload, situational awareness, decision making and crew performance within mission critical environments. Conduct usability evaluations, trials, simulations and verification activities for Defence systems and equipment. Work closely with Systems Engineers, Safety Engineers, Designers and Operational Subject Matter Experts to integrate human centred design principles into system development. Contribute to design reviews and provide Human Factors recommendations to influence engineering decisions. Essential Experience Proven experience delivering Human Factors Engineering activities within Defence, Aerospace, Maritime, Nuclear, Rail or other safety critical industries. Strong understanding of Human Factors methodologies, analyses and assessment techniques. Experience supporting Systems Engineering and Safety Engineering activities throughout the project lifecycle. Knowledge of Human Machine Interface (HMI) design principles and operator centred system design. Experience conducting task analysis, workload assessment and human error analysis. Ability to produce technical reports and present findings to engineering and programme stakeholders. Strong stakeholder engagement and communication skills. Desirable Experience Experience working on MOD, Defence Prime or Government programmes. Knowledge of Human Systems Integration (HSI) frameworks. Familiarity with Defence Standards and relevant guidance, including: Def Stan 00-251 JSP 912 Human Factors Integration Defence Human Factors Integration Guidance ISO 6385 ISO 9241 Experience supporting Safety Cases and Hazard Analysis activities. Previous involvement in military platform, mission system, command and control, training system or complex equipment programmes. Current SC or DV Security Clearance. Key Words Human Factors, Human Factors Engineering, HFE, Human Systems Integration, HSI, Human Reliability Analysis, HRA, Human Error Analysis, Systems Engineering, Safety Engineering, Defence, MOD, Aerospace, Maritime, Mission Systems, Operator Performance, Cognitive Task Analysis, HTA, HMI, Safety Case, SC Clearance.
What Are We Looking For? RSE Controls (Saftronics) is recruitinga Software Engineer that will be responsible for the development, commissioning and support of automation and control systems. RSE Controls are a specialist business in the MCC and power control sector, and youll be working alongside an established team to deliver control system solutions to the water industry. Some of Your Key Duties Include: The design, specification, programming, simulation and testing of automation and control systems. Developing, troubleshooting, and validating these systems in a compliant manner. Generate documentation and SOPs associated with each of the Automation systems as required. Assist tendering and project teams in the development of manhour budgets and programs for software development and delivery. Trouble shooting of PLC software code for startup and commissioning activities. Manage the production of FDS documentation to support software production and the end user. Design activities will involve: Interfacing with instrumentation and sensors specific for machine and process control. Data capture and validation. Designing and implementing PLC networks. Electrical systems design, detailed hardware component specifications and bill of materials. Programming a range of PLCs, primarily SIEMENS, Mitsubishi, and Allen Bradley. What Do You Need? Degree qualified in Engineering or equivalent, particular emphasis on electrical, mechanical, electronic, automation and/or chemical discipline. A proven background in the design and commissioning of control and electrical systems associated with process automation. Experience with Programmable Logic Controllers (PLCs) and Vision Systems in the process control environment. Experience in one or more of the following: Allen Bradley, SIEMENS, Mitsubishi. HMI and SCADA programming and configuration of the following software packages Wonderware, InTouch, RS View, SIEMENS, Labview, GE Cimplicity. FAT and SATA experience with PLC and Electrical Control Systems. A working knowledge of process systems, P&ID control and loop tuning. Must be flexible and willing to travel. RSE Controls (Saftronics) Who Are We? RSE Controls (Saftronics) are specialists in power & process control, excelling in the specification and supply of motor control centres, control panels, power distribution and process control systems across a wide range of industries. RSE Who Are We? Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSEs key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What We Offer To build successful teams and drive the level of quality that we are renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in such an innovative industry. Youll be given every opportunity to set the path of your career through our Business Streams and work in an environment that will require you to rise to the challenge of working for a market leader. Industry-leading salary dependant on experience. A flexible career development path, with no restrictions on where your career can go. A holiday allowance of 25 days plus Bank Holidays. EV/Hybrid Car Lease Scheme Discount Retail Platform Company Pension Scheme. Cycle to work scheme. If youre interested in a career with a company that will harness your skills and provides you with the support to create your future, then please apply. JBRP1_UKTJ
Jul 13, 2026
Full time
What Are We Looking For? RSE Controls (Saftronics) is recruitinga Software Engineer that will be responsible for the development, commissioning and support of automation and control systems. RSE Controls are a specialist business in the MCC and power control sector, and youll be working alongside an established team to deliver control system solutions to the water industry. Some of Your Key Duties Include: The design, specification, programming, simulation and testing of automation and control systems. Developing, troubleshooting, and validating these systems in a compliant manner. Generate documentation and SOPs associated with each of the Automation systems as required. Assist tendering and project teams in the development of manhour budgets and programs for software development and delivery. Trouble shooting of PLC software code for startup and commissioning activities. Manage the production of FDS documentation to support software production and the end user. Design activities will involve: Interfacing with instrumentation and sensors specific for machine and process control. Data capture and validation. Designing and implementing PLC networks. Electrical systems design, detailed hardware component specifications and bill of materials. Programming a range of PLCs, primarily SIEMENS, Mitsubishi, and Allen Bradley. What Do You Need? Degree qualified in Engineering or equivalent, particular emphasis on electrical, mechanical, electronic, automation and/or chemical discipline. A proven background in the design and commissioning of control and electrical systems associated with process automation. Experience with Programmable Logic Controllers (PLCs) and Vision Systems in the process control environment. Experience in one or more of the following: Allen Bradley, SIEMENS, Mitsubishi. HMI and SCADA programming and configuration of the following software packages Wonderware, InTouch, RS View, SIEMENS, Labview, GE Cimplicity. FAT and SATA experience with PLC and Electrical Control Systems. A working knowledge of process systems, P&ID control and loop tuning. Must be flexible and willing to travel. RSE Controls (Saftronics) Who Are We? RSE Controls (Saftronics) are specialists in power & process control, excelling in the specification and supply of motor control centres, control panels, power distribution and process control systems across a wide range of industries. RSE Who Are We? Established in 1982, RSE has grown into one of the most prominent MEICA engineering businesses in the UK water industry. We have created a complete in-house and full-service capability from project inception through to design, fabrication, and delivery by means of installation and commissioning. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSEs key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What We Offer To build successful teams and drive the level of quality that we are renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in such an innovative industry. Youll be given every opportunity to set the path of your career through our Business Streams and work in an environment that will require you to rise to the challenge of working for a market leader. Industry-leading salary dependant on experience. A flexible career development path, with no restrictions on where your career can go. A holiday allowance of 25 days plus Bank Holidays. EV/Hybrid Car Lease Scheme Discount Retail Platform Company Pension Scheme. Cycle to work scheme. If youre interested in a career with a company that will harness your skills and provides you with the support to create your future, then please apply. JBRP1_UKTJ
Controls Engineer Location: Clevedon, North Somerset Salary: Up to £43,000 per annum Bonus Job Type: Full-time, Permanent Working Pattern: On-site Benefits & Package Up to 7.5% annual bonus Up to 8% employer pension contribution Life assurance Health cash plan & wellbeing programme Discounted gym memberships 25 days holiday plus bank holidays Free parking & subsidised canteen About the RoleAn exciting opportunity has arisen for a Controls Engineer to join an established engineering team, developing PLC and HMI control software for advanced engineering products. You will be responsible for designing, developing, testing and supporting control solutions throughout the product lifecycle, working closely with multidisciplinary engineering teams to deliver high-quality automation systems. Key Responsibilities Develop PLC and HMI software in line with functional specifications Design, test and validate control software solutions Produce technical documentation and support release processes Troubleshoot software issues and support manufacturing and service teams Contribute to project planning, risk management and continuous improvement About YouWe are looking for a Controls Engineer with experience in automation, PLC programming and industrial control systems. Ideally, you will have: HND, Degree or equivalent qualification in Controls Engineering, Software Engineering or a related discipline Experience developing PLC and HMI software within an engineering environment Knowledge of PLC programming including Ladder Logic, Structured Text and Function Blocks Experience with HMI programming and technical documentation Ability to read electrical schematics and P&ID diagrams Desirable experience: Modbus TCP and EtherCAT communication protocols PID control loops Functional safety, HAZOP or FMEA techniques Manufacturing, automation or industrial control experience LocationBased in Clevedon, North Somerset, this is an on-site role working with experienced engineering teams on innovative control solutions. Occasional travel to customer sites may be required. How to Apply Click Apply to submit your CV for consideration. If you have any questions about this opportunity, please contact Kirk at Pertemps, Bristol.
Jul 13, 2026
Full time
Controls Engineer Location: Clevedon, North Somerset Salary: Up to £43,000 per annum Bonus Job Type: Full-time, Permanent Working Pattern: On-site Benefits & Package Up to 7.5% annual bonus Up to 8% employer pension contribution Life assurance Health cash plan & wellbeing programme Discounted gym memberships 25 days holiday plus bank holidays Free parking & subsidised canteen About the RoleAn exciting opportunity has arisen for a Controls Engineer to join an established engineering team, developing PLC and HMI control software for advanced engineering products. You will be responsible for designing, developing, testing and supporting control solutions throughout the product lifecycle, working closely with multidisciplinary engineering teams to deliver high-quality automation systems. Key Responsibilities Develop PLC and HMI software in line with functional specifications Design, test and validate control software solutions Produce technical documentation and support release processes Troubleshoot software issues and support manufacturing and service teams Contribute to project planning, risk management and continuous improvement About YouWe are looking for a Controls Engineer with experience in automation, PLC programming and industrial control systems. Ideally, you will have: HND, Degree or equivalent qualification in Controls Engineering, Software Engineering or a related discipline Experience developing PLC and HMI software within an engineering environment Knowledge of PLC programming including Ladder Logic, Structured Text and Function Blocks Experience with HMI programming and technical documentation Ability to read electrical schematics and P&ID diagrams Desirable experience: Modbus TCP and EtherCAT communication protocols PID control loops Functional safety, HAZOP or FMEA techniques Manufacturing, automation or industrial control experience LocationBased in Clevedon, North Somerset, this is an on-site role working with experienced engineering teams on innovative control solutions. Occasional travel to customer sites may be required. How to Apply Click Apply to submit your CV for consideration. If you have any questions about this opportunity, please contact Kirk at Pertemps, Bristol.
An exciting opportunity has arisen for a Controls Engineer to join an established engineering team, developing PLC and HMI control software for advanced engineering products. You will be responsible for designing, developing, testing and supporting control solutions throughout the product lifecycle, working closely with multidisciplinary engineering teams to deliver high-quality automation systems click apply for full job details
Jul 11, 2026
Full time
An exciting opportunity has arisen for a Controls Engineer to join an established engineering team, developing PLC and HMI control software for advanced engineering products. You will be responsible for designing, developing, testing and supporting control solutions throughout the product lifecycle, working closely with multidisciplinary engineering teams to deliver high-quality automation systems click apply for full job details
ROLE OVERVIEW We are currently looking for a Senior Engineer (Control Systems Engineer) to join a leading biotechnology manufacturing organization based in the UK. This is an exciting opportunity for a highly skilled control systems professional to contribute to the design, delivery, and validation of GMP-compliant automation solutions within a dynamic and regulated environment. You will work within a team that values innovation, quality, and continuous improvement, playing a key role in supporting manufacturing excellence. This role offers the chance to lead complex automation projects, work closely with cross-functional teams, and develop site-wide strategies for control system enhancements in a fast-paced biotech setting. If you have a passion for automation and a proven track record in pharmaceutical or biotech industries, this could be the perfect next step in your career. KEY DUTIES AND RESPONSIBILITIES Your duties as the Senior Engineer (Control Systems Engineer) will be varied however the key duties and responsibilities are as follows: • Lead the design, delivery, and lifecycle management of GMP-compliant control systems, including PLC, SCADA, and HMI to support manufacturing processes. • Define system architectures, standards, and ensure traceability throughout project phases from user requirements to software design and deployment. • Oversee automation system development, configuration, and software validation, ensuring adherence to regulatory and GMP standards. • Manage commissioning, qualification, validation activities, and coordinate system handovers, leading audits and interface with regulators and vendors. • As the Control Systems SME, you will lead automation improvement initiatives, support digital transformation strategies, and manage change control processes. ROLE REQUIREMENTS To be successful in your application to this exciting role as the Senior Engineer (Control Systems Engineer) we are looking to identify the following on your profile and past history: • A Degree or higher level in engineering or a science discipline (e.g., Electrical, Mechanical, Automation Engineering). • Proven experience in automation system design, validation, and lifecycle management within pharmaceutical, biotech, or similar regulated environments. • Extensive knowledge of PLC, SCADA (e.g., Siemens, Allen Bradley), GMP, data integrity, and validation standards. WHAT'S IN IT FOR YOU? Joining our client means becoming part of a forward-thinking organization dedicated to innovation and quality. You will have the opportunity to lead impactful projects, influence automation strategy, and develop your expertise within a collaborative and supportive environment. Competitive benefits, ongoing professional development, and the chance to work on complex, high-value capital projects are just some of the perks awaiting you. Key Words: Senior Engineer / Control Systems / Automation / GMP / Validation / SCADA / PLC / Biotech / Pharma / Continuous Improvement / Project Management / Regulatory Compliance "Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer. We welcome applications from anyone who meets the role requirements. HRS exclusively supports the STEM sectors, combining recruitment expertise with scientific knowledge to help you advance your career".
Jul 11, 2026
Full time
ROLE OVERVIEW We are currently looking for a Senior Engineer (Control Systems Engineer) to join a leading biotechnology manufacturing organization based in the UK. This is an exciting opportunity for a highly skilled control systems professional to contribute to the design, delivery, and validation of GMP-compliant automation solutions within a dynamic and regulated environment. You will work within a team that values innovation, quality, and continuous improvement, playing a key role in supporting manufacturing excellence. This role offers the chance to lead complex automation projects, work closely with cross-functional teams, and develop site-wide strategies for control system enhancements in a fast-paced biotech setting. If you have a passion for automation and a proven track record in pharmaceutical or biotech industries, this could be the perfect next step in your career. KEY DUTIES AND RESPONSIBILITIES Your duties as the Senior Engineer (Control Systems Engineer) will be varied however the key duties and responsibilities are as follows: • Lead the design, delivery, and lifecycle management of GMP-compliant control systems, including PLC, SCADA, and HMI to support manufacturing processes. • Define system architectures, standards, and ensure traceability throughout project phases from user requirements to software design and deployment. • Oversee automation system development, configuration, and software validation, ensuring adherence to regulatory and GMP standards. • Manage commissioning, qualification, validation activities, and coordinate system handovers, leading audits and interface with regulators and vendors. • As the Control Systems SME, you will lead automation improvement initiatives, support digital transformation strategies, and manage change control processes. ROLE REQUIREMENTS To be successful in your application to this exciting role as the Senior Engineer (Control Systems Engineer) we are looking to identify the following on your profile and past history: • A Degree or higher level in engineering or a science discipline (e.g., Electrical, Mechanical, Automation Engineering). • Proven experience in automation system design, validation, and lifecycle management within pharmaceutical, biotech, or similar regulated environments. • Extensive knowledge of PLC, SCADA (e.g., Siemens, Allen Bradley), GMP, data integrity, and validation standards. WHAT'S IN IT FOR YOU? Joining our client means becoming part of a forward-thinking organization dedicated to innovation and quality. You will have the opportunity to lead impactful projects, influence automation strategy, and develop your expertise within a collaborative and supportive environment. Competitive benefits, ongoing professional development, and the chance to work on complex, high-value capital projects are just some of the perks awaiting you. Key Words: Senior Engineer / Control Systems / Automation / GMP / Validation / SCADA / PLC / Biotech / Pharma / Continuous Improvement / Project Management / Regulatory Compliance "Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer. We welcome applications from anyone who meets the role requirements. HRS exclusively supports the STEM sectors, combining recruitment expertise with scientific knowledge to help you advance your career".
PLC Software Engineer Home-based with travel to customer sites across the Midlands, Norfolk, Suffolk & Lincolnshire, Cambridgeshire, plus occasional visits to Northern Ireland. £50,000 - £60,000 (depending on experience) Full-time Permanent Rise10 Recruitment is delighted to be partnering with a leading engineering business to recruit an experienced PLC Software Engineer. This is an excellent opportunity to join a growing automation team delivering innovative process control solutions for major infrastructure projects within the UK water industry. This role offers the flexibility of primarily working from home, with travel to customer sites for commissioning activities and occasional visits Northern Ireland. The Role As a PLC Software Engineer, you'll be responsible for developing, testing and commissioning PLC and HMI software for automation projects, primarily within the water sector. Developing PLC and HMI software applications, primarily using Schneider Electric EcoStruxure. Modifying and enhancing existing Rockwell PLC and HMI software. Designing, programming, testing and commissioning automation systems. Producing and interpreting logic diagrams and control flow documentation. Debugging, fault finding and resolving operational issues. Configuring and commissioning automation and process control equipment. Modifying software to meet changing customer requirements. Providing technical support and guidance to Field Service Engineers. Supporting continuous improvement of automation processes. Carrying out on-site commissioning of electrical and electronic control systems. About You We're looking for someone who enjoys solving technical challenges and delivering high-quality automation solutions. Essential: Degree, HND or equivalent qualification in Electrical or Electronic Engineering. Minimum of 3 years' experience in PLC programming. Experience in system software engineering. Full UK driving licence. Willingness to travel for commissioning and customer support. Desirable: Experience within the water or wastewater industry. Knowledge of electrical control panels. Experience working with automation and process control equipment. Exposure to other PLC platforms such as Siemens, Mitsubishi or Omron. What's on Offer Salary of £50,000-£60,000 depending on experience. Primarily remote/home-based working. Opportunity to work on large-scale water infrastructure projects. Varied role combining software development with on-site commissioning. Supportive and collaborative engineering environment. Long-term career progression with a growing and well-established business. If you're an experienced PLC Software Engineer looking for a role that offers flexibility, technical variety and the opportunity to work on meaningful engineering projects, we'd love to hear from you. Apply Now!
Jul 11, 2026
Full time
PLC Software Engineer Home-based with travel to customer sites across the Midlands, Norfolk, Suffolk & Lincolnshire, Cambridgeshire, plus occasional visits to Northern Ireland. £50,000 - £60,000 (depending on experience) Full-time Permanent Rise10 Recruitment is delighted to be partnering with a leading engineering business to recruit an experienced PLC Software Engineer. This is an excellent opportunity to join a growing automation team delivering innovative process control solutions for major infrastructure projects within the UK water industry. This role offers the flexibility of primarily working from home, with travel to customer sites for commissioning activities and occasional visits Northern Ireland. The Role As a PLC Software Engineer, you'll be responsible for developing, testing and commissioning PLC and HMI software for automation projects, primarily within the water sector. Developing PLC and HMI software applications, primarily using Schneider Electric EcoStruxure. Modifying and enhancing existing Rockwell PLC and HMI software. Designing, programming, testing and commissioning automation systems. Producing and interpreting logic diagrams and control flow documentation. Debugging, fault finding and resolving operational issues. Configuring and commissioning automation and process control equipment. Modifying software to meet changing customer requirements. Providing technical support and guidance to Field Service Engineers. Supporting continuous improvement of automation processes. Carrying out on-site commissioning of electrical and electronic control systems. About You We're looking for someone who enjoys solving technical challenges and delivering high-quality automation solutions. Essential: Degree, HND or equivalent qualification in Electrical or Electronic Engineering. Minimum of 3 years' experience in PLC programming. Experience in system software engineering. Full UK driving licence. Willingness to travel for commissioning and customer support. Desirable: Experience within the water or wastewater industry. Knowledge of electrical control panels. Experience working with automation and process control equipment. Exposure to other PLC platforms such as Siemens, Mitsubishi or Omron. What's on Offer Salary of £50,000-£60,000 depending on experience. Primarily remote/home-based working. Opportunity to work on large-scale water infrastructure projects. Varied role combining software development with on-site commissioning. Supportive and collaborative engineering environment. Long-term career progression with a growing and well-established business. If you're an experienced PLC Software Engineer looking for a role that offers flexibility, technical variety and the opportunity to work on meaningful engineering projects, we'd love to hear from you. Apply Now!
Premier Technical Recruitment Ltd
Bishop's Stortford, Hertfordshire
Electrical Wiring Technician Bishop's Stortford £ excellent remuneration and benefits Our client has been established for more than half a century and specialise in the design, manufacture and global supply of bespoke and innovative cleaning solutions to a range of sectors including biotech and pharmaceutical, and as a result of continued success and an ongoing programme of strategic growth, are now seeking to recruit an experienced Electrical Wiring Technician to complement their professional electrical engineering team. Core responsibilities for this varied and challenging Electrical Wiring technician role based in Bishop's Stortford will include (but not be limited to): Manufacturing of control panels, drilling and fitting control equipment to technical drawings. Wiring control panels as the supplied wiring schematics. Bench testing control panels. Wiring of skid mounted equipment including; valves, pumps, heaters and instrumentation (3ph & 1ph equipment) Fitting of skid mounted pneumatic equipment. Terminating of cabling and pneumatics in control panels. PAT testing within the workplace. Responsible for Electrical Stock take, reporting of low stock to ensure it is replenished before running out. Electrical re-assembly of systems on site. Able to comply with the Company's arrangements for quality, environmental and health and safety, including those within the Company's Integrated Management System, as an Electrical Wiring Technician you will realistically demonstrate skills and experience in the following: Essentially holding an electrical qualification. C & G 236 or level 3 NVQ with AM2 and 18th edition wiring certificate. Basic experience in controls and electrical wiring with some literacy of electrical drawings. Basic panel wiring knowledge along with basic workshop technical skills (i.e., familiar with power tools, hand tools and engineering hygiene). Comfortable with physical aspects of working on skids (i.e. able to get around steel framed equipment systems) with good time keeping and organisational skills Full driving licence is also essential. Advanced panel wiring knowledge, the ability to perform fault find, modification and debug on PLC's and HMI's and an understanding of P&ID's and General Arrangement drawings will prove distinctly advantageous for this Electrical Wiring Technician position, as will an understanding of basic circuits, fault finding, testing and commissioning of skid wiring and electrical panels. Contact the Electrical Team at Premier Technical Recruitment on or email your cv in confidence to
Jul 10, 2026
Full time
Electrical Wiring Technician Bishop's Stortford £ excellent remuneration and benefits Our client has been established for more than half a century and specialise in the design, manufacture and global supply of bespoke and innovative cleaning solutions to a range of sectors including biotech and pharmaceutical, and as a result of continued success and an ongoing programme of strategic growth, are now seeking to recruit an experienced Electrical Wiring Technician to complement their professional electrical engineering team. Core responsibilities for this varied and challenging Electrical Wiring technician role based in Bishop's Stortford will include (but not be limited to): Manufacturing of control panels, drilling and fitting control equipment to technical drawings. Wiring control panels as the supplied wiring schematics. Bench testing control panels. Wiring of skid mounted equipment including; valves, pumps, heaters and instrumentation (3ph & 1ph equipment) Fitting of skid mounted pneumatic equipment. Terminating of cabling and pneumatics in control panels. PAT testing within the workplace. Responsible for Electrical Stock take, reporting of low stock to ensure it is replenished before running out. Electrical re-assembly of systems on site. Able to comply with the Company's arrangements for quality, environmental and health and safety, including those within the Company's Integrated Management System, as an Electrical Wiring Technician you will realistically demonstrate skills and experience in the following: Essentially holding an electrical qualification. C & G 236 or level 3 NVQ with AM2 and 18th edition wiring certificate. Basic experience in controls and electrical wiring with some literacy of electrical drawings. Basic panel wiring knowledge along with basic workshop technical skills (i.e., familiar with power tools, hand tools and engineering hygiene). Comfortable with physical aspects of working on skids (i.e. able to get around steel framed equipment systems) with good time keeping and organisational skills Full driving licence is also essential. Advanced panel wiring knowledge, the ability to perform fault find, modification and debug on PLC's and HMI's and an understanding of P&ID's and General Arrangement drawings will prove distinctly advantageous for this Electrical Wiring Technician position, as will an understanding of basic circuits, fault finding, testing and commissioning of skid wiring and electrical panels. Contact the Electrical Team at Premier Technical Recruitment on or email your cv in confidence to
Premier Technical Recruitment Ltd
Leicester, Leicestershire
Control Software Engineer to c£55k neg dep exp plus benefits East Midlands - commutable from Nottingham, Leicester and Coventry Our client demonstrates almost 40 years' experience in the manufacture of bespoke automation and robotic systems for a range of industrial applications and are regarded as one of the leading automation system solution providers in the UK. As a result of continued success and a planned programme of strategic growth, they are now seeking to recruit an experienced and enthusiastic Control Software Engineer to complement their established professional team and deliver machine control system solutions allied to a range of automated machinery-based projects. Tasked with writing and developing software, PLC & HMI coding for various automation projects, as a Control Software Engineer you will also be responsible for the electrical design and creation of machine control system solutions for special purpose automated machinery projects. Other duties will include delivering control and safety systems that comply with the requirements of the machinery directive and appropriate applicable standards, and electrical system design, selection of components and generating detailed circuit diagrams as required. Based near Leicester, you will also be responsible for the integration of various robots, including SCARA, Delta & 6-axis and will liaise extensively with customers, suppliers and team members, so effective communication skills at all levels are essential for the position, and you will be comfortable in working both autonomously and as part of a team dedicated to delivering projects within budgetary and timescale constraints. Additionally, you will follow projects through from design, development and commissioning stages on machine control and safety systems and will be responsible for the creation of associated electrical documentation including circuit diagrams, cable schedules, installation documents BOM's. and bills of materials. You will also ensure that machine electrical systems and safety systems comply with all relevant European and international safety standards and for the correct selection and procurement of all necessary components. To be considered for this varied and challenging Control Software Engineer role it is envisaged that the successful candidate will demonstrate at least 5 years' experience of software design and PLC coding with particular experience of working with Omron, Siemens and Allen Bradley equipment proving distinctly advantageous. You will essentially possess comprehensive skills and experience of electrical design for machine automation using ePlan, along with knowledge and understanding of the various national and international electrical standards for machine design and machine safety systems and requirements to CE mark machine systems. Realistically you will be qualified to degree level or equivalent in electrical / electronic engineering or a closely related control system discipline with a flexible approach to travel to customer sites across the UK if required. In return, an excellent benefits package and genuine scope to progress your career into a management position supervising a team of control software and service engineers is available for the right candidate - so if you believe you possess the relevant skills and experience for this position, contact the Controls Team at Premier Technical Recruitment on or email your cv in confidence to for further details.
Jul 10, 2026
Full time
Control Software Engineer to c£55k neg dep exp plus benefits East Midlands - commutable from Nottingham, Leicester and Coventry Our client demonstrates almost 40 years' experience in the manufacture of bespoke automation and robotic systems for a range of industrial applications and are regarded as one of the leading automation system solution providers in the UK. As a result of continued success and a planned programme of strategic growth, they are now seeking to recruit an experienced and enthusiastic Control Software Engineer to complement their established professional team and deliver machine control system solutions allied to a range of automated machinery-based projects. Tasked with writing and developing software, PLC & HMI coding for various automation projects, as a Control Software Engineer you will also be responsible for the electrical design and creation of machine control system solutions for special purpose automated machinery projects. Other duties will include delivering control and safety systems that comply with the requirements of the machinery directive and appropriate applicable standards, and electrical system design, selection of components and generating detailed circuit diagrams as required. Based near Leicester, you will also be responsible for the integration of various robots, including SCARA, Delta & 6-axis and will liaise extensively with customers, suppliers and team members, so effective communication skills at all levels are essential for the position, and you will be comfortable in working both autonomously and as part of a team dedicated to delivering projects within budgetary and timescale constraints. Additionally, you will follow projects through from design, development and commissioning stages on machine control and safety systems and will be responsible for the creation of associated electrical documentation including circuit diagrams, cable schedules, installation documents BOM's. and bills of materials. You will also ensure that machine electrical systems and safety systems comply with all relevant European and international safety standards and for the correct selection and procurement of all necessary components. To be considered for this varied and challenging Control Software Engineer role it is envisaged that the successful candidate will demonstrate at least 5 years' experience of software design and PLC coding with particular experience of working with Omron, Siemens and Allen Bradley equipment proving distinctly advantageous. You will essentially possess comprehensive skills and experience of electrical design for machine automation using ePlan, along with knowledge and understanding of the various national and international electrical standards for machine design and machine safety systems and requirements to CE mark machine systems. Realistically you will be qualified to degree level or equivalent in electrical / electronic engineering or a closely related control system discipline with a flexible approach to travel to customer sites across the UK if required. In return, an excellent benefits package and genuine scope to progress your career into a management position supervising a team of control software and service engineers is available for the right candidate - so if you believe you possess the relevant skills and experience for this position, contact the Controls Team at Premier Technical Recruitment on or email your cv in confidence to for further details.
Are you an experienced Human Factors Engineer with a background in Defence, Aerospace, or highly regulated engineering environments? Evodia Limited is working with a leading defence client to find a Human Factors Engineer to support critical safety and design assurance activities. This is an excellent opportunity to contribute to a major military programme, ensuring safety, usability, and system effectiveness for cutting-edge land vehicle technology. About the Role This contract role is based in Bristol, offering a flexible hybrid working pattern. You will report directly to the AJAX Engineering Lead, acting as the Human Factors Subject Matter Expert. Your work will involve collaborating closely with the prime contractor (General Dynamics) and military stakeholders to deliver vital human factors solutions, particularly in the aftermath of recent safety investigations. Your primary responsibilities include supporting demonstration, V&V, and system acceptance activities, as well as aiding the closure of critical safety actions following the Titan Storm incident. The successful candidate will influence design decisions, resolve human factors issues, and ensure compliance with safety requirements relevant to military operations. What Youll Bring Proven experience in Human Factors Engineering (HFE) or Human Factors Integration (HFI). Background within Defence, Military, Aerospace, or regulated environments. Experience supporting requirements verification, validation (V&V), and system acceptance. Ability to evaluate and influence engineering designs where human factors are critical to safety and performance. Strong stakeholder management skills, with the ability to work with industry partners, government, and end users. Experience producing technical reports, evidence, and recommendations to support programme objectives. A relevant degree in Human Factors, Ergonomics, Psychology, Engineering, or related discipline. Desirable Skills Previous involvement in the AJAX programme or military land systems. Experience with safety investigations and lesson-learning activities. Knowledge of Human Machine Interface (HMI) design and Human Systems Integration (HSI) methodologies. Familiarity with MOD, DE&S, Dstl, or defence primes like BAE, Leonardo, or Thales. Membership of CIEHF or equivalent. Details Location: Bristol (hybrid working, 3 days on-site) Contract Duration: Until 31 March 2027 (with scope to extend) Security Clearance: SC clearance minimum Day Rate: £420 to £570 (inside IR35) Working Hours: 7.5 hours per day If youre ready to bring your expertise to a high-stakes project that makes a difference, wed love to hear from you. At Evodia Limited, were committed to supporting you through every step of the process. Apply now to become part of a team shaping the future of defence technology. This vacancy is advertised on behalf of our client, with Evodia Limited acting as the employment business. JBRP1_UKTJ
Jul 09, 2026
Full time
Are you an experienced Human Factors Engineer with a background in Defence, Aerospace, or highly regulated engineering environments? Evodia Limited is working with a leading defence client to find a Human Factors Engineer to support critical safety and design assurance activities. This is an excellent opportunity to contribute to a major military programme, ensuring safety, usability, and system effectiveness for cutting-edge land vehicle technology. About the Role This contract role is based in Bristol, offering a flexible hybrid working pattern. You will report directly to the AJAX Engineering Lead, acting as the Human Factors Subject Matter Expert. Your work will involve collaborating closely with the prime contractor (General Dynamics) and military stakeholders to deliver vital human factors solutions, particularly in the aftermath of recent safety investigations. Your primary responsibilities include supporting demonstration, V&V, and system acceptance activities, as well as aiding the closure of critical safety actions following the Titan Storm incident. The successful candidate will influence design decisions, resolve human factors issues, and ensure compliance with safety requirements relevant to military operations. What Youll Bring Proven experience in Human Factors Engineering (HFE) or Human Factors Integration (HFI). Background within Defence, Military, Aerospace, or regulated environments. Experience supporting requirements verification, validation (V&V), and system acceptance. Ability to evaluate and influence engineering designs where human factors are critical to safety and performance. Strong stakeholder management skills, with the ability to work with industry partners, government, and end users. Experience producing technical reports, evidence, and recommendations to support programme objectives. A relevant degree in Human Factors, Ergonomics, Psychology, Engineering, or related discipline. Desirable Skills Previous involvement in the AJAX programme or military land systems. Experience with safety investigations and lesson-learning activities. Knowledge of Human Machine Interface (HMI) design and Human Systems Integration (HSI) methodologies. Familiarity with MOD, DE&S, Dstl, or defence primes like BAE, Leonardo, or Thales. Membership of CIEHF or equivalent. Details Location: Bristol (hybrid working, 3 days on-site) Contract Duration: Until 31 March 2027 (with scope to extend) Security Clearance: SC clearance minimum Day Rate: £420 to £570 (inside IR35) Working Hours: 7.5 hours per day If youre ready to bring your expertise to a high-stakes project that makes a difference, wed love to hear from you. At Evodia Limited, were committed to supporting you through every step of the process. Apply now to become part of a team shaping the future of defence technology. This vacancy is advertised on behalf of our client, with Evodia Limited acting as the employment business. JBRP1_UKTJ
Job Title: Project & Automation Engineer Salary: 55,000 - 60,000 Location: Nottinghamshire Job Type: Full-time, Permanent (Direct with Employer) Overview The Flavour Network are partnered with a growing food manufacturing business in the East Midlands to recruit a Project & Automation Engineer. This is an excellent opportunity for a hands-on engineering professional to lead and deliver a range of automation, process improvement, and capital projects within a fast-paced manufacturing environment. The successful candidate will take ownership of projects from initial concept through to installation, commissioning, and handover, combining practical engineering expertise with strong project delivery skills. Working closely with Production and Engineering teams, the Project & Automation Engineer will play a key role in identifying opportunities for improvement, designing and implementing engineering solutions, and supporting the site's ongoing investment programme. This is a varied role that requires both technical problem-solving and a willingness to be actively involved on the factory floor, whether fabricating equipment, building control systems, supporting commissioning activities, or delivering automation improvements. The position offers significant autonomy, technical variety, and the opportunity to make a tangible contribution to manufacturing performance, efficiency, and future site development. Key Responsibilities for the Project & Automation Engineer Lead and deliver automation, engineering, and continuous improvement projects from concept through to commissioning Design, fabricate, and install mechanical improvements, bespoke equipment, and production aids Build, wire, and modify electrical control panels, including VFDs, relays, contactors, and PLC systems Programme and modify PLCs and HMIs to support automation and process improvements Install and calibrate sensors, solenoids, motors, drives, and safety devices Support the planning and delivery of CAPEX projects across the manufacturing site Install, commission, and optimise new machinery and production line upgrades Work closely with Production teams to trial, evaluate, and implement engineering improvements Maintain accurate project documentation, technical drawings, and engineering records Ensure all projects and installations comply with food safety, quality, and health & safety standards Support and mentor junior engineers or apprentices where required Requirements for the Project & Automation Engineer Proven experience within a food manufacturing, FMCG, or manufacturing environment Strong understanding of automation, controls, and production machinery PLC and HMI programming experience (Mitsubishi, Omron, Siemens, or similar) Experience designing, building, and wiring electrical control panels Hands-on mechanical engineering and fabrication skills, including MIG and TIG welding Knowledge of sensors, drives, control systems, and automation integration Experience delivering engineering projects from concept through to implementation A practical and solutions-focused approach with strong fault-finding and problem-solving abilities Self-motivated with the ability to manage multiple priorities and take ownership of projects Strong communication and documentation skills What's on Offer for the Project & Automation Engineer Competitive salary plus a comprehensive benefits package Opportunity to work on varied and technically challenging engineering projects A highly autonomous role with genuine ownership of projects A supportive environment where engineering improvements are encouraged and implemented If you're an engineer who enjoys designing, building, improving, and delivering practical solutions that make a measurable impact, we'd love to hear from you.
Jul 09, 2026
Full time
Job Title: Project & Automation Engineer Salary: 55,000 - 60,000 Location: Nottinghamshire Job Type: Full-time, Permanent (Direct with Employer) Overview The Flavour Network are partnered with a growing food manufacturing business in the East Midlands to recruit a Project & Automation Engineer. This is an excellent opportunity for a hands-on engineering professional to lead and deliver a range of automation, process improvement, and capital projects within a fast-paced manufacturing environment. The successful candidate will take ownership of projects from initial concept through to installation, commissioning, and handover, combining practical engineering expertise with strong project delivery skills. Working closely with Production and Engineering teams, the Project & Automation Engineer will play a key role in identifying opportunities for improvement, designing and implementing engineering solutions, and supporting the site's ongoing investment programme. This is a varied role that requires both technical problem-solving and a willingness to be actively involved on the factory floor, whether fabricating equipment, building control systems, supporting commissioning activities, or delivering automation improvements. The position offers significant autonomy, technical variety, and the opportunity to make a tangible contribution to manufacturing performance, efficiency, and future site development. Key Responsibilities for the Project & Automation Engineer Lead and deliver automation, engineering, and continuous improvement projects from concept through to commissioning Design, fabricate, and install mechanical improvements, bespoke equipment, and production aids Build, wire, and modify electrical control panels, including VFDs, relays, contactors, and PLC systems Programme and modify PLCs and HMIs to support automation and process improvements Install and calibrate sensors, solenoids, motors, drives, and safety devices Support the planning and delivery of CAPEX projects across the manufacturing site Install, commission, and optimise new machinery and production line upgrades Work closely with Production teams to trial, evaluate, and implement engineering improvements Maintain accurate project documentation, technical drawings, and engineering records Ensure all projects and installations comply with food safety, quality, and health & safety standards Support and mentor junior engineers or apprentices where required Requirements for the Project & Automation Engineer Proven experience within a food manufacturing, FMCG, or manufacturing environment Strong understanding of automation, controls, and production machinery PLC and HMI programming experience (Mitsubishi, Omron, Siemens, or similar) Experience designing, building, and wiring electrical control panels Hands-on mechanical engineering and fabrication skills, including MIG and TIG welding Knowledge of sensors, drives, control systems, and automation integration Experience delivering engineering projects from concept through to implementation A practical and solutions-focused approach with strong fault-finding and problem-solving abilities Self-motivated with the ability to manage multiple priorities and take ownership of projects Strong communication and documentation skills What's on Offer for the Project & Automation Engineer Competitive salary plus a comprehensive benefits package Opportunity to work on varied and technically challenging engineering projects A highly autonomous role with genuine ownership of projects A supportive environment where engineering improvements are encouraged and implemented If you're an engineer who enjoys designing, building, improving, and delivering practical solutions that make a measurable impact, we'd love to hear from you.
Control System Engineer (Siemens/SCADA) Tiverton (Field Based) £65,000 - £70,000 + Technical Progression Are you a Control System Engineer or similar who is happy to travel to company sites throughout the UK, who can write SCADA and PLC programs from scratch, looking for a role in an innovative and industry leading CIP manufacturer where you will be the technical go to, known for their market leading products which they supply on a worldwide scale? Do you want to work in a role where you can gain exposure to a variety of PLC and SCADA systems, across an array of industries, where you will be the technical expert in a tight-knit and renowned CIP manufacturer who since their creation have seen significant growth to where they are mow market leaders in their field? On offer is the chance to work for a tight-knit company who supply their own custom-made CIP cleaning solutions to a broad client's base across the UK and wider world, who due to an ever-increasing workload are looking to employ a Control Systems Engineer to their skillful and specialist team. In this role you will be responsible for maintaining, improving, and implementing control systems for tanker cleaning equipment. You will also be responsible for designing, coding, testing, and troubleshooting PLC programs and programming SCADA and HMI systems. Experience in Siemens and B&R automation PLC's is advantageous, along with FactoryTalk and AVEVA Plant SCADAs, although people with experience in others will still be suitable. This role would suit a Control Systems Engineer or similar, looking for a role where they can set the bar for the company's technical expertise, who can write SCADA and PLC programs from scratch, looking for a role in an innovative and industry leading CIP manufacturing company. The Role Maintaining, improving, and implementing control systems for tanker cleaning equipment Designing, coding, testing, and troubleshooting PLC programs Programming SCADA and HMI systems The Person Control Systems Engineer or similar Happy to travel to client sites 2 out of 5 days a week Full UK driving license BBBH25971 Key Words: Control Systems Engineer, Controls Engineer, Systems Engineer, Engineer, Engineering, Control, System, HMI, PLC, SCADA, Siemens, B&R Automation, FactoryTalk, AVEVA Plant, Tiverton, Uffculme, Wellington, Taunton, Exeter, Yeovil If you are interested in this role, click 'Apply Now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's Privacy Policy and Disclaimers which can be found on our website.
Jul 09, 2026
Full time
Control System Engineer (Siemens/SCADA) Tiverton (Field Based) £65,000 - £70,000 + Technical Progression Are you a Control System Engineer or similar who is happy to travel to company sites throughout the UK, who can write SCADA and PLC programs from scratch, looking for a role in an innovative and industry leading CIP manufacturer where you will be the technical go to, known for their market leading products which they supply on a worldwide scale? Do you want to work in a role where you can gain exposure to a variety of PLC and SCADA systems, across an array of industries, where you will be the technical expert in a tight-knit and renowned CIP manufacturer who since their creation have seen significant growth to where they are mow market leaders in their field? On offer is the chance to work for a tight-knit company who supply their own custom-made CIP cleaning solutions to a broad client's base across the UK and wider world, who due to an ever-increasing workload are looking to employ a Control Systems Engineer to their skillful and specialist team. In this role you will be responsible for maintaining, improving, and implementing control systems for tanker cleaning equipment. You will also be responsible for designing, coding, testing, and troubleshooting PLC programs and programming SCADA and HMI systems. Experience in Siemens and B&R automation PLC's is advantageous, along with FactoryTalk and AVEVA Plant SCADAs, although people with experience in others will still be suitable. This role would suit a Control Systems Engineer or similar, looking for a role where they can set the bar for the company's technical expertise, who can write SCADA and PLC programs from scratch, looking for a role in an innovative and industry leading CIP manufacturing company. The Role Maintaining, improving, and implementing control systems for tanker cleaning equipment Designing, coding, testing, and troubleshooting PLC programs Programming SCADA and HMI systems The Person Control Systems Engineer or similar Happy to travel to client sites 2 out of 5 days a week Full UK driving license BBBH25971 Key Words: Control Systems Engineer, Controls Engineer, Systems Engineer, Engineer, Engineering, Control, System, HMI, PLC, SCADA, Siemens, B&R Automation, FactoryTalk, AVEVA Plant, Tiverton, Uffculme, Wellington, Taunton, Exeter, Yeovil If you are interested in this role, click 'Apply Now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's Privacy Policy and Disclaimers which can be found on our website.
Senior Controls Engineer Location: Clevedon, North Somerset Salary: Up to £53,000 per annum Bonus Job Type: Full-time, Permanent Working Pattern: On-site Benefits & PackagePackage includes: Up to 7.5% annual bonus Up to 8% employer pension contribution Life assurance Health cash plan Wellbeing programme Discounted gym memberships 25 days holiday plus bank holidays Free parking & subsidised canteen About the RoleWe are looking for an experienced Senior Controls Engineer to join a growing engineering team, developing advanced control and visualisation software for innovative engineering products. Reporting to the Controls Engineering Manager, you'll take ownership of software design and specification, provide technical leadership, mentor junior engineers, and help drive continuous improvement across the controls engineering function. Key Responsibilities Design and develop PLC and HMI software for new and existing products. Produce and review software specifications and technical documentation. Carry out software testing, validation, and simulation activities. Support project planning and ensure engineering activities are delivered on time. Drive continuous improvement of controls engineering processes and standards. Investigate software quality issues and provide expert technical support. Produce software release documentation, manuals, and build notes. Mentor junior engineers and deliver technical training across the team. About YouWe're looking for an experienced Controls Engineer with a strong background in industrial automation and software development. You'll ideally have: HND, Degree, or equivalent qualification in Controls Engineering, Software Engineering, or a related discipline. At least five years' experience in controls and software engineering. Strong PLC programming experience, including Ladder Logic, Structured Text, Function Blocks, and Data Structures. HMI programming experience using VB.NET or similar high-level languages. Experience with Modbus communications, software configuration management, and technical documentation. Knowledge of P&ID drawings, electrical schematics, PID control loops, HAZOP, and FMEA. Excellent communication, analytical, and problem-solving skills. Ability to mentor colleagues and work effectively within multidisciplinary engineering teams. Desirable experience includes PLC hardware configuration, simulation tools, HTML5, JavaScript, ASP, functional safety systems, and SEMI industry standards. LocationThis is an on-site role based in Clevedon, North Somerset , working closely with multidisciplinary engineering teams. Occasional travel to customer sites and other engineering locations may be required. How to Apply Click Apply to submit your CV for consideration. If you have any questions about this opportunity, please contact Kirk at Pertemps, Bristol .
Jul 09, 2026
Full time
Senior Controls Engineer Location: Clevedon, North Somerset Salary: Up to £53,000 per annum Bonus Job Type: Full-time, Permanent Working Pattern: On-site Benefits & PackagePackage includes: Up to 7.5% annual bonus Up to 8% employer pension contribution Life assurance Health cash plan Wellbeing programme Discounted gym memberships 25 days holiday plus bank holidays Free parking & subsidised canteen About the RoleWe are looking for an experienced Senior Controls Engineer to join a growing engineering team, developing advanced control and visualisation software for innovative engineering products. Reporting to the Controls Engineering Manager, you'll take ownership of software design and specification, provide technical leadership, mentor junior engineers, and help drive continuous improvement across the controls engineering function. Key Responsibilities Design and develop PLC and HMI software for new and existing products. Produce and review software specifications and technical documentation. Carry out software testing, validation, and simulation activities. Support project planning and ensure engineering activities are delivered on time. Drive continuous improvement of controls engineering processes and standards. Investigate software quality issues and provide expert technical support. Produce software release documentation, manuals, and build notes. Mentor junior engineers and deliver technical training across the team. About YouWe're looking for an experienced Controls Engineer with a strong background in industrial automation and software development. You'll ideally have: HND, Degree, or equivalent qualification in Controls Engineering, Software Engineering, or a related discipline. At least five years' experience in controls and software engineering. Strong PLC programming experience, including Ladder Logic, Structured Text, Function Blocks, and Data Structures. HMI programming experience using VB.NET or similar high-level languages. Experience with Modbus communications, software configuration management, and technical documentation. Knowledge of P&ID drawings, electrical schematics, PID control loops, HAZOP, and FMEA. Excellent communication, analytical, and problem-solving skills. Ability to mentor colleagues and work effectively within multidisciplinary engineering teams. Desirable experience includes PLC hardware configuration, simulation tools, HTML5, JavaScript, ASP, functional safety systems, and SEMI industry standards. LocationThis is an on-site role based in Clevedon, North Somerset , working closely with multidisciplinary engineering teams. Occasional travel to customer sites and other engineering locations may be required. How to Apply Click Apply to submit your CV for consideration. If you have any questions about this opportunity, please contact Kirk at Pertemps, Bristol .
Lead Controls Engineer Location: Bristol Salary: £53,000 - £63,000 per annum + 7.5% annual bonus Hours: Monday to Friday, core office hours with an early finish at 1:00pm every FridayHybrid Working Available Outsource UK are recruiting a Lead Controls Engineer Outsource UK is recruiting on behalf of a leading manufacturing business for an experienced Lead Controls Engineer to join their team. This is an excellent opportunity for a controls engineering professional to take on a leadership role, guiding a team of engineers while driving the design, development, implementation, and support of advanced control systems. Key Responsibilities Lead, mentor, and develop a team of Controls Engineers, setting clear objectives and priorities. Drive the design, development, implementation, and maintenance of control systems. Collaborate with multidisciplinary engineering teams to ensure seamless integration of control systems within wider projects. Ensure all control systems meet required performance standards, safety regulations, and compliance requirements through robust testing and validation. Provide technical support and troubleshooting expertise for complex control system issues. Support and develop junior engineers through coaching and mentoring. Engage with customers to understand requirements and provide technical guidance and support. Stay current with emerging control systems technologies and identify opportunities for continuous improvement. About You: HND, Degree, or equivalent qualification in a relevant technical discipline Strong PLC programming experience HMI programming experience using VB.NET or other high-level programming languages. Experience producing technical documentation. Strong communication skills with a good level of spoken and written English. Previous experience within controls and software engineering in a relevant industrial environment. Knowledge of communication protocols such as Modbus TCP and EtherCAT. Experience working within complex engineering or manufacturing environments. If you're an experienced Controls Engineer looking to take the next step into a leadership role, we'd love to hear from you. Apply today through Outsource UK. Inclusion Statement: Outsource UK is committed to creating a diverse and inclusive environment and is proud to be an equal opportunity employer. You'll receive fair consideration for your application regardless of your race, religion or belief, gender, gender identity or expression, sex, sexual orientation, disability, marriage and civil partnership, pregnancy and maternity, or age. We're proud Corporate Members of the Hidden Disabilities Sunflower. If you need any adjustments at any stage - from application to interview or in your new role - please let us know. We're here to support you every step of the way. We believe diversity of thought and background makes us stronger, and we welcome applications from people of all backgrounds and life experiences.
Jul 08, 2026
Full time
Lead Controls Engineer Location: Bristol Salary: £53,000 - £63,000 per annum + 7.5% annual bonus Hours: Monday to Friday, core office hours with an early finish at 1:00pm every FridayHybrid Working Available Outsource UK are recruiting a Lead Controls Engineer Outsource UK is recruiting on behalf of a leading manufacturing business for an experienced Lead Controls Engineer to join their team. This is an excellent opportunity for a controls engineering professional to take on a leadership role, guiding a team of engineers while driving the design, development, implementation, and support of advanced control systems. Key Responsibilities Lead, mentor, and develop a team of Controls Engineers, setting clear objectives and priorities. Drive the design, development, implementation, and maintenance of control systems. Collaborate with multidisciplinary engineering teams to ensure seamless integration of control systems within wider projects. Ensure all control systems meet required performance standards, safety regulations, and compliance requirements through robust testing and validation. Provide technical support and troubleshooting expertise for complex control system issues. Support and develop junior engineers through coaching and mentoring. Engage with customers to understand requirements and provide technical guidance and support. Stay current with emerging control systems technologies and identify opportunities for continuous improvement. About You: HND, Degree, or equivalent qualification in a relevant technical discipline Strong PLC programming experience HMI programming experience using VB.NET or other high-level programming languages. Experience producing technical documentation. Strong communication skills with a good level of spoken and written English. Previous experience within controls and software engineering in a relevant industrial environment. Knowledge of communication protocols such as Modbus TCP and EtherCAT. Experience working within complex engineering or manufacturing environments. If you're an experienced Controls Engineer looking to take the next step into a leadership role, we'd love to hear from you. Apply today through Outsource UK. Inclusion Statement: Outsource UK is committed to creating a diverse and inclusive environment and is proud to be an equal opportunity employer. You'll receive fair consideration for your application regardless of your race, religion or belief, gender, gender identity or expression, sex, sexual orientation, disability, marriage and civil partnership, pregnancy and maternity, or age. We're proud Corporate Members of the Hidden Disabilities Sunflower. If you need any adjustments at any stage - from application to interview or in your new role - please let us know. We're here to support you every step of the way. We believe diversity of thought and background makes us stronger, and we welcome applications from people of all backgrounds and life experiences.
hackajob is collaborating with Pro-Sight Vision to connect them with exceptional professionals for this role. Controls & Automation Engineer Job Title Controls & Automation Engineer Location Office Based - between Sheffield and Leeds (M1 corridor) Employment Type Permanent, Full-Time Onsite Requirement Primarily office based; occasional factory and customer site visits (2 to 5 days/month average) Department Software / Engineering / Automation ROLE OVERVIEW We are seeking a highly skilled and motivated Controls & Automation Engineer to join our growing engineering team. The successful candidate will play an active role in the development of new automated machines, working alongside our mechanical and electrical design teams from concept through to production-ready systems. They will be responsible for designing, developing, and commissioning PLC-based control systems and HMI interfaces, and will provide ongoing field support including calibration visits, fault diagnosis, and troubleshooting at customer sites. This is a technically demanding role requiring broad expertise across motion control, variable frequency drives, and software development, combined with a practical hands-on approach to factory acceptance testing and customer commissioning. KEY RESPONSIBILITIES Design, develop, and commission PLC programs for the control of industrial automation machinery. Collaborate with the mechanical and electrical engineering teams in the development of new automated machines, from concept through to production-ready control systems. Create and implement graphical HMI programs to complement and support PLC-based control systems. Select, configure, program and commission servo motor and drive systems for precision motion control applications. Select, configure, program and commission stepper motor and drive systems as appropriate to application requirements. Program and configure Variable Frequency Drives (VFDs) for the control of AC induction motors. Participate in factory acceptance testing (FAT) at our facility, working alongside the production and engineering teams. Travel to customer sites to carry out equipment start-up, commissioning, and operator/maintenance training. Produce clear and accurate technical documentation, including control narratives, wiring schedules, operator manuals and commissioning records. Provide on-site fault diagnosis and technical troubleshooting support at customer sites when required. Carry out calibration checks on customer premises to ensure continued accurate and reliable operation of installed systems. Work collaboratively with the wider engineering teams throughout the full project lifecycle. Contribute to continuous improvement initiatives in engineering processes and documentation standards. Participate in occasional overseas commissioning trips as project requirements demand. ESSENTIAL REQUIREMENTS Experience & Qualifications Minimum 5 years of hands-on, industry-based experience writing PLC programs for the automation and control of industrial machinery. Allen-Bradley and/or Siemens. Demonstrable experience developing HMI graphical interface programs in an industrial environment. Strong knowledge of motion control systems - including the selection, programming, and commissioning of servo motors and drives. Proven ability to programme and configure Variable Frequency Drives (VFDs) for induction motor applications. Experience of carrying out or supporting factory acceptance testing of automated machinery. Demonstrable experience of equipment commissioning and/or customer training on site. Proven ability to contribute to the development of new automated machines, working collaboratively across engineering disciplines from initial specification through to production sign-off. Experience of visiting customer sites to carry out start-up, performance verification, and/or fault diagnosis. Personal Attributes Exceptional attention to detail with a commitment to producing work of the highest accuracy. Willingness and flexibility to visit customer sites for commissioning and training - estimated 2 to 5 days per month on average. A professional, customer-facing manner suitable for on-site training and support activities. Self-motivated and able to manage tasks independently while working effectively within a team. Willingness to travel occasionally overseas in support of international customer projects. DESIRABLE SKILLS (NOT ESSENTIAL) Experience working across multiple PLC platforms and/or HMI manufacturers. Practical experience with stepper motors and stepper drive systems. Knowledge of industrial communications protocols (e.g. Profibus, Profinet, EtherNet/IP, Modbus). Ability to design electrical schematics and control panel layouts using dedicated electrical CAD software. Familiarity with one or more of the following electrical design packages: EPLAN, AutoCAD Electrical, or Schneider Electric SEE Electrical. Familiarity with machine safety standards and functional safety (e.g. EN ISO 13849, IEC 62061). TRAVEL & SITE WORK This role is primarily office based. However, the successful candidate must be willing and able to travel as part of their duties. Site work is expected to average between two and five days per month, and will primarily involve: Factory acceptance testing at our own facility. Equipment start-up, commissioning and customer operator/maintenance training - predominantly at customer sites local to our premises, typically not requiring overnight stays. Scheduled calibration visits and performance verification checks at customer sites. Reactive troubleshooting and fault diagnosis at customer sites when required. Occasional domestic and international travel for commissioning activities at customer sites further afield.
Jul 08, 2026
Full time
hackajob is collaborating with Pro-Sight Vision to connect them with exceptional professionals for this role. Controls & Automation Engineer Job Title Controls & Automation Engineer Location Office Based - between Sheffield and Leeds (M1 corridor) Employment Type Permanent, Full-Time Onsite Requirement Primarily office based; occasional factory and customer site visits (2 to 5 days/month average) Department Software / Engineering / Automation ROLE OVERVIEW We are seeking a highly skilled and motivated Controls & Automation Engineer to join our growing engineering team. The successful candidate will play an active role in the development of new automated machines, working alongside our mechanical and electrical design teams from concept through to production-ready systems. They will be responsible for designing, developing, and commissioning PLC-based control systems and HMI interfaces, and will provide ongoing field support including calibration visits, fault diagnosis, and troubleshooting at customer sites. This is a technically demanding role requiring broad expertise across motion control, variable frequency drives, and software development, combined with a practical hands-on approach to factory acceptance testing and customer commissioning. KEY RESPONSIBILITIES Design, develop, and commission PLC programs for the control of industrial automation machinery. Collaborate with the mechanical and electrical engineering teams in the development of new automated machines, from concept through to production-ready control systems. Create and implement graphical HMI programs to complement and support PLC-based control systems. Select, configure, program and commission servo motor and drive systems for precision motion control applications. Select, configure, program and commission stepper motor and drive systems as appropriate to application requirements. Program and configure Variable Frequency Drives (VFDs) for the control of AC induction motors. Participate in factory acceptance testing (FAT) at our facility, working alongside the production and engineering teams. Travel to customer sites to carry out equipment start-up, commissioning, and operator/maintenance training. Produce clear and accurate technical documentation, including control narratives, wiring schedules, operator manuals and commissioning records. Provide on-site fault diagnosis and technical troubleshooting support at customer sites when required. Carry out calibration checks on customer premises to ensure continued accurate and reliable operation of installed systems. Work collaboratively with the wider engineering teams throughout the full project lifecycle. Contribute to continuous improvement initiatives in engineering processes and documentation standards. Participate in occasional overseas commissioning trips as project requirements demand. ESSENTIAL REQUIREMENTS Experience & Qualifications Minimum 5 years of hands-on, industry-based experience writing PLC programs for the automation and control of industrial machinery. Allen-Bradley and/or Siemens. Demonstrable experience developing HMI graphical interface programs in an industrial environment. Strong knowledge of motion control systems - including the selection, programming, and commissioning of servo motors and drives. Proven ability to programme and configure Variable Frequency Drives (VFDs) for induction motor applications. Experience of carrying out or supporting factory acceptance testing of automated machinery. Demonstrable experience of equipment commissioning and/or customer training on site. Proven ability to contribute to the development of new automated machines, working collaboratively across engineering disciplines from initial specification through to production sign-off. Experience of visiting customer sites to carry out start-up, performance verification, and/or fault diagnosis. Personal Attributes Exceptional attention to detail with a commitment to producing work of the highest accuracy. Willingness and flexibility to visit customer sites for commissioning and training - estimated 2 to 5 days per month on average. A professional, customer-facing manner suitable for on-site training and support activities. Self-motivated and able to manage tasks independently while working effectively within a team. Willingness to travel occasionally overseas in support of international customer projects. DESIRABLE SKILLS (NOT ESSENTIAL) Experience working across multiple PLC platforms and/or HMI manufacturers. Practical experience with stepper motors and stepper drive systems. Knowledge of industrial communications protocols (e.g. Profibus, Profinet, EtherNet/IP, Modbus). Ability to design electrical schematics and control panel layouts using dedicated electrical CAD software. Familiarity with one or more of the following electrical design packages: EPLAN, AutoCAD Electrical, or Schneider Electric SEE Electrical. Familiarity with machine safety standards and functional safety (e.g. EN ISO 13849, IEC 62061). TRAVEL & SITE WORK This role is primarily office based. However, the successful candidate must be willing and able to travel as part of their duties. Site work is expected to average between two and five days per month, and will primarily involve: Factory acceptance testing at our own facility. Equipment start-up, commissioning and customer operator/maintenance training - predominantly at customer sites local to our premises, typically not requiring overnight stays. Scheduled calibration visits and performance verification checks at customer sites. Reactive troubleshooting and fault diagnosis at customer sites when required. Occasional domestic and international travel for commissioning activities at customer sites further afield.
Lead Controls Engineer Location: Clevedon, North Somerset Salary: Up to £62,000 per annum Bonus Job Type: Full-time, Permanent Working Pattern: On-site Benefits & PackagePackage includes: Up to 7.5% annual bonus Up to 8% employer pension contribution Life assurance Health cash plan Wellbeing programme Discounted gym memberships 25 days holiday plus bank holidays Free parking & subsidised canteen About the RoleWe are looking for an experienced Lead Controls Engineer to lead a team responsible for the design, development, and delivery of advanced control systems. Reporting to the Controls Engineering Manager, you'll provide technical and people leadership, ensuring high-quality control solutions are delivered safely, on time, and to specification. You'll also work closely with multidisciplinary engineering teams to drive innovation, mentor engineers, and continuously improve engineering processes. Key Responsibilities: Lead, coach, and develop a team of Controls Engineers. Oversee the design and development of PLC and HMI control software. Ensure projects are delivered on time, within budget, and to engineering standards. Review and approve technical solutions and engineering documentation. Work closely with Mechanical, Electrical, Software, and Manufacturing teams to deliver integrated control solutions. Lead software testing, validation, and continuous improvement activities. Provide expert technical support for complex engineering issues. Support customer projects and occasional site visits when required. About YouWe're looking for an experienced Controls Engineer with strong leadership skills and a passion for delivering innovative automation solutions. You'll ideally have: HND, Degree, or equivalent qualification in Controls Engineering, Software Engineering, or a related discipline. Proven experience leading engineering teams or acting as a senior technical lead. Strong experience developing industrial PLC and HMI control systems. Knowledge of Ladder Logic, Structured Text, Function Blocks, and Data Structures. Experience with software configuration management and technical documentation. Ability to read and interpret P&ID drawings and electrical schematics. Excellent communication, leadership, and stakeholder management skills. Strong problem-solving skills and the ability to manage multiple engineering projects. Desirable experience includes Modbus TCP, EtherCAT, PID control loops, HAZOP, FMEA, and leading multidisciplinary engineering projects. LocationThis is an on-site role based in Clevedon, North Somerset , working closely with multidisciplinary engineering teams. Occasional travel to customer sites and other engineering locations may be required. How to Apply Click Apply to submit your CV for consideration. If you have any questions about this opportunity, please contact Kirk at Pertemps, Bristol .
Jul 08, 2026
Full time
Lead Controls Engineer Location: Clevedon, North Somerset Salary: Up to £62,000 per annum Bonus Job Type: Full-time, Permanent Working Pattern: On-site Benefits & PackagePackage includes: Up to 7.5% annual bonus Up to 8% employer pension contribution Life assurance Health cash plan Wellbeing programme Discounted gym memberships 25 days holiday plus bank holidays Free parking & subsidised canteen About the RoleWe are looking for an experienced Lead Controls Engineer to lead a team responsible for the design, development, and delivery of advanced control systems. Reporting to the Controls Engineering Manager, you'll provide technical and people leadership, ensuring high-quality control solutions are delivered safely, on time, and to specification. You'll also work closely with multidisciplinary engineering teams to drive innovation, mentor engineers, and continuously improve engineering processes. Key Responsibilities: Lead, coach, and develop a team of Controls Engineers. Oversee the design and development of PLC and HMI control software. Ensure projects are delivered on time, within budget, and to engineering standards. Review and approve technical solutions and engineering documentation. Work closely with Mechanical, Electrical, Software, and Manufacturing teams to deliver integrated control solutions. Lead software testing, validation, and continuous improvement activities. Provide expert technical support for complex engineering issues. Support customer projects and occasional site visits when required. About YouWe're looking for an experienced Controls Engineer with strong leadership skills and a passion for delivering innovative automation solutions. You'll ideally have: HND, Degree, or equivalent qualification in Controls Engineering, Software Engineering, or a related discipline. Proven experience leading engineering teams or acting as a senior technical lead. Strong experience developing industrial PLC and HMI control systems. Knowledge of Ladder Logic, Structured Text, Function Blocks, and Data Structures. Experience with software configuration management and technical documentation. Ability to read and interpret P&ID drawings and electrical schematics. Excellent communication, leadership, and stakeholder management skills. Strong problem-solving skills and the ability to manage multiple engineering projects. Desirable experience includes Modbus TCP, EtherCAT, PID control loops, HAZOP, FMEA, and leading multidisciplinary engineering projects. LocationThis is an on-site role based in Clevedon, North Somerset , working closely with multidisciplinary engineering teams. Occasional travel to customer sites and other engineering locations may be required. How to Apply Click Apply to submit your CV for consideration. If you have any questions about this opportunity, please contact Kirk at Pertemps, Bristol .
hackajob is collaborating with Leonardo to connect them with exceptional professionals for this role. Job Description: Your Impact Are you looking for a change of role and are wondering if a move into FPGA (Field-Programmable Gate Array) design might be for you? Leonardo provides a route to develop your existing skills in our on-site FPGA Academy, to allow you to become a full-time Senior FPGA / Firmware Engineer. You'll then apply your talents to a range of cutting edge designs in our world class Radar and Advanced Targeting Systems (RATS) team. About the FPGA Academy The FPGA Academy is a 16 week structured training and development programme designed for engineers with transferable technical skill sets (such as electronic engineering, embedded software, or systems engineering) who wish to transition into FPGA / Firmware Engineering. The Academy provides focused technical training, mentored practical exercises, and hands on project work. On successful completion, engineers are deployed across a range of complex design projects, contributing to real systems alongside experienced FPGA and Electronics engineers. This programme is not intended for absolute beginners; it is aimed at capable engineers with strong fundamentals and proven problem solving ability who can quickly adapt and progress. About the Role As an FPGA Academy Engineer, you will re-skill into a FPGA / Firmware engineering role and apply your existing engineering and coding experience to the design, implementation, and verification of complex electronic systems. You will learn how to translate requirements into robust FPGA-based solutions and work within established engineering processes suitable for high reliability and mission critical applications. What You'll Do During the Academy, and following deployment, you will: Undertake a structured 16 week FPGA training programme combining: Practical labs Mentored design exercises Online training material and self-led research Apply systems thinking to hardware design challenges Post training deployment into established engineering teams Once you have completed the Academy, as a FPGA / Firmware Engineer, you will be responsible for (with support appropriate to your development stage): Hardware requirements, capture and management Concept development for complex functions and systems FPGA design, implementation, and analysis Applying verification techniques using VHDL or SystemVerilog, with exposure to UVM where applicable Production of material for design reviews Development of test planning, integration, and design verification activities Ensuring all firmware designs comply with the company firmware development process Working with FPGA technologies and tools from AMD, Altera, or Microchip What you'll bring A degree (BSc, BEng, MEng, MSc, PhD, EngD) in Electrical & Electronic Engineering (preferred) or a related science (e.g. Physics) Coding experience, such as: Embedded C / C++, Python / scripting languages, Low level or real time software, algorithmic or systems level programming Proven engineering problem solving experience, demonstrated through academic projects, industrial experience or personal / independent engineering work Strong digital engineering fundamentals and the ability to learn quickly Security Clearance This role is subject to pre-employment screening in line with the UK Government's Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: Why join us At Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work-life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we're here to help you thrive. Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year. Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution. Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity). Rewarding Performance: All employees at management level and below are eligible for our bonus scheme. Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning. Refer a friend: Receive a financial reward through our referral programme. Tailored Perks: Spend up to £500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more. Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role. For a full list of our company benefits please visit our website. Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team-they are key contributors to shaping innovation, advancing technology, and enhancing global safety. At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know. Be part of something bigger - apply now! Primary Location: GB - Newcastle Additional Locations: GB - Edinburgh Contract Type: Permanent Hybrid Working: Hybrid
Jul 08, 2026
Full time
hackajob is collaborating with Leonardo to connect them with exceptional professionals for this role. Job Description: Your Impact Are you looking for a change of role and are wondering if a move into FPGA (Field-Programmable Gate Array) design might be for you? Leonardo provides a route to develop your existing skills in our on-site FPGA Academy, to allow you to become a full-time Senior FPGA / Firmware Engineer. You'll then apply your talents to a range of cutting edge designs in our world class Radar and Advanced Targeting Systems (RATS) team. About the FPGA Academy The FPGA Academy is a 16 week structured training and development programme designed for engineers with transferable technical skill sets (such as electronic engineering, embedded software, or systems engineering) who wish to transition into FPGA / Firmware Engineering. The Academy provides focused technical training, mentored practical exercises, and hands on project work. On successful completion, engineers are deployed across a range of complex design projects, contributing to real systems alongside experienced FPGA and Electronics engineers. This programme is not intended for absolute beginners; it is aimed at capable engineers with strong fundamentals and proven problem solving ability who can quickly adapt and progress. About the Role As an FPGA Academy Engineer, you will re-skill into a FPGA / Firmware engineering role and apply your existing engineering and coding experience to the design, implementation, and verification of complex electronic systems. You will learn how to translate requirements into robust FPGA-based solutions and work within established engineering processes suitable for high reliability and mission critical applications. What You'll Do During the Academy, and following deployment, you will: Undertake a structured 16 week FPGA training programme combining: Practical labs Mentored design exercises Online training material and self-led research Apply systems thinking to hardware design challenges Post training deployment into established engineering teams Once you have completed the Academy, as a FPGA / Firmware Engineer, you will be responsible for (with support appropriate to your development stage): Hardware requirements, capture and management Concept development for complex functions and systems FPGA design, implementation, and analysis Applying verification techniques using VHDL or SystemVerilog, with exposure to UVM where applicable Production of material for design reviews Development of test planning, integration, and design verification activities Ensuring all firmware designs comply with the company firmware development process Working with FPGA technologies and tools from AMD, Altera, or Microchip What you'll bring A degree (BSc, BEng, MEng, MSc, PhD, EngD) in Electrical & Electronic Engineering (preferred) or a related science (e.g. Physics) Coding experience, such as: Embedded C / C++, Python / scripting languages, Low level or real time software, algorithmic or systems level programming Proven engineering problem solving experience, demonstrated through academic projects, industrial experience or personal / independent engineering work Strong digital engineering fundamentals and the ability to learn quickly Security Clearance This role is subject to pre-employment screening in line with the UK Government's Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: Why join us At Leonardo, our people are at the heart of everything we do. We offer a comprehensive, company-funded benefits package that supports your wellbeing, career development, and work-life balance. Whether you're looking to grow professionally, care for your health, or plan for the future, we're here to help you thrive. Time to Recharge: Enjoy generous leave with the opportunity to accrue up to 12 additional flexi-days each year. Secure your Future: Benefit from our award-winning pension scheme with up to 15% employer contribution. Your Wellbeing Matters: Free access to mental health support, financial advice, and employee-led networks championing inclusion and diversity (Enable, Pride, Equalise, Armed Forces, Carers, Wellbeing and Ethnicity). Rewarding Performance: All employees at management level and below are eligible for our bonus scheme. Never Stop Learning: Free access to 4,000+ online courses via Coursera and LinkedIn Learning. Refer a friend: Receive a financial reward through our referral programme. Tailored Perks: Spend up to £500 annually on flexible benefits including private healthcare, dental, family cover, tech & lifestyle discounts, gym memberships and more. Flexible working: Flexible hours with hybrid working options. For part time opportunities, please talk to us about what might be possible for this role. For a full list of our company benefits please visit our website. Leonardo is a global leader in Aerospace, Defence, and Security. Headquartered in Italy, we employ over 53,000 people worldwide including 8,500 across 9 sites in the UK. Our employees are not just part of a team-they are key contributors to shaping innovation, advancing technology, and enhancing global safety. At Leonardo we are committed to building an inclusive, accessible, and welcoming workplace. We believe that a diverse workforce sparks creativity, drives innovation, and leads to better outcomes for our people and our customers. If you have any accessibility requirements to support you during the recruitment process, just let us know. Be part of something bigger - apply now! Primary Location: GB - Newcastle Additional Locations: GB - Edinburgh Contract Type: Permanent Hybrid Working: Hybrid
An opportunity for an experienced Controls & Integration Engineer to design, develop, integrate, commission and support end-to-end warehouse automation solutions. This role requires expertise beyond PLC programming, encompassing full system integration with Warehouse Control Systems (WCS) and Warehouse Management Systems (WMS). Role Location: Remote with visits to Northampton office Role Summary Full lifecycle ownership of automation projects, from software development through to post-implementation support. Design and integration of control systems with WCS and WMS platforms. Delivery of innovative warehouse and pallet automation solutions. Extensive UK travel to support commissioning, optimisation and customer delivery activities. Key Responsibilities Design, develop and modify PLC and control software. Develop and implement integrations between PLC, WCS and WMS platforms. Configure and maintain industrial communication networks and interfaces. Lead commissioning, fault-finding, debugging and optimisation activities on live customer sites. Execute Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT) and system validation activities. Support system performance through implementation and operational handover. Diagnose and resolve issues across controls, software, network and system logic layers. Collaborate with customers and internal stakeholders throughout project delivery. Technical Requirements Strong PLC programming experience. Experience developing and commissioning WCS/WMS integrations. Understanding of database interaction, APIs and middleware technologies. Knowledge of industrial communication protocols. Experience within warehouse automation, intralogistics or material handling environments. Proven commissioning and troubleshooting experience in live operational settings. Desirable Experience Experience with alternative PLC platforms. SCADA and HMI development experience. Exposure to SQL, REST APIs or higher-level software integration. Experience with automated storage and retrieval systems (ASRS), shuttle systems or pallet automation technologies. Additional European language skills would be advantageous. Candidate Profile The successful candidate will: Be comfortable working across PLC programming, system logic and software integration layers. Take ownership of solutions from design through to operational performance and optimisation. Thrive in innovative, fast-paced engineering environments. Demonstrate a proactive, solutions-focused and accountable approach. Communicate effectively with both technical and non-technical stakeholders. This is a hands-on engineering role focused on delivering fully integrated automation solutions that perform reliably in operational environments, from initial development through to post-implementation optimisation.
Jul 08, 2026
Full time
An opportunity for an experienced Controls & Integration Engineer to design, develop, integrate, commission and support end-to-end warehouse automation solutions. This role requires expertise beyond PLC programming, encompassing full system integration with Warehouse Control Systems (WCS) and Warehouse Management Systems (WMS). Role Location: Remote with visits to Northampton office Role Summary Full lifecycle ownership of automation projects, from software development through to post-implementation support. Design and integration of control systems with WCS and WMS platforms. Delivery of innovative warehouse and pallet automation solutions. Extensive UK travel to support commissioning, optimisation and customer delivery activities. Key Responsibilities Design, develop and modify PLC and control software. Develop and implement integrations between PLC, WCS and WMS platforms. Configure and maintain industrial communication networks and interfaces. Lead commissioning, fault-finding, debugging and optimisation activities on live customer sites. Execute Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT) and system validation activities. Support system performance through implementation and operational handover. Diagnose and resolve issues across controls, software, network and system logic layers. Collaborate with customers and internal stakeholders throughout project delivery. Technical Requirements Strong PLC programming experience. Experience developing and commissioning WCS/WMS integrations. Understanding of database interaction, APIs and middleware technologies. Knowledge of industrial communication protocols. Experience within warehouse automation, intralogistics or material handling environments. Proven commissioning and troubleshooting experience in live operational settings. Desirable Experience Experience with alternative PLC platforms. SCADA and HMI development experience. Exposure to SQL, REST APIs or higher-level software integration. Experience with automated storage and retrieval systems (ASRS), shuttle systems or pallet automation technologies. Additional European language skills would be advantageous. Candidate Profile The successful candidate will: Be comfortable working across PLC programming, system logic and software integration layers. Take ownership of solutions from design through to operational performance and optimisation. Thrive in innovative, fast-paced engineering environments. Demonstrate a proactive, solutions-focused and accountable approach. Communicate effectively with both technical and non-technical stakeholders. This is a hands-on engineering role focused on delivering fully integrated automation solutions that perform reliably in operational environments, from initial development through to post-implementation optimisation.
