Description As a Trainee Service Delivery Supervisor, you will be trained to manage the LDP Operational Teams in the successful delivery of the Cadent Mains Replacement Programme in the North West. The Trainee Service Delivery Supervisor will learn to provide supervision to those teams under their jurisdiction, from work stack handover through to project completion in an effective and efficient manner. Success will be measured against our 3 imperatives; HSEQ performance, programme adherence and outstanding customer satisfaction. Key Responsibilities Learn to supervise the delivery teams during the works, including site set up, enabling of the works, Gas operations, backfill and reinstatement and site completion Attend all sites in order to disseminate the Construction Phase Plan information, including all RAMS, with regards setting up of the site and to brief the Team leader on their responsibilities to ensure that the works carried out on the Network comply with the relevant statutory requirements (CDM, IGEM) and Cadent standards and Procedures Learn how to supervise, the opening and closing of street works permits in accordance with NRSWA including the management of agreed Traffic Management and Permit Conditions and the timely capture of reinstatement completion information Ensure that all the client and operational requirements are met in a professional and efficient manner Work collaboratively with the Customer Liaison Officer to engage with customers and identify any specific needs (PSR, language line etc) to minimise disruption Provide daily and weekly reports as required and to ensure that all service levels and objectives are achieved Provide a positive and innovative input into the team, through provision of solutions to problems and embracing change Ensure that safety issues are reported in line with Company procedures Experience and Qualifications Training will be given in the below SHEA (Gas) NRSWA 1991 (Supervisor) SCO 1,2 & 5 (preferred) IOSH or SMSTS (preferred) NCO Gas Level 2 / Gas managers appreciation Salary and Benefits We offer a competitive salary based on experience along with a full benefits package. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy. About Network Plus Network Plus is an award-winning business delivering essential utility and infrastructure services for the UKs major providers of gas, power, telecoms, transport, water, and wastewater. We value the variety of experience, perspective, and other points of difference our workforce, clients, and supply chain offer. We are actively working with colleagues across the Network Plus Group to develop an inclusive environment we want all our employees to feel valued and included to enable everyone to thrive at work and understand the value of their contribution matters no matter their background, identity, or circumstances. JBRP1_UKTJ
Jun 25, 2026
Full time
Description As a Trainee Service Delivery Supervisor, you will be trained to manage the LDP Operational Teams in the successful delivery of the Cadent Mains Replacement Programme in the North West. The Trainee Service Delivery Supervisor will learn to provide supervision to those teams under their jurisdiction, from work stack handover through to project completion in an effective and efficient manner. Success will be measured against our 3 imperatives; HSEQ performance, programme adherence and outstanding customer satisfaction. Key Responsibilities Learn to supervise the delivery teams during the works, including site set up, enabling of the works, Gas operations, backfill and reinstatement and site completion Attend all sites in order to disseminate the Construction Phase Plan information, including all RAMS, with regards setting up of the site and to brief the Team leader on their responsibilities to ensure that the works carried out on the Network comply with the relevant statutory requirements (CDM, IGEM) and Cadent standards and Procedures Learn how to supervise, the opening and closing of street works permits in accordance with NRSWA including the management of agreed Traffic Management and Permit Conditions and the timely capture of reinstatement completion information Ensure that all the client and operational requirements are met in a professional and efficient manner Work collaboratively with the Customer Liaison Officer to engage with customers and identify any specific needs (PSR, language line etc) to minimise disruption Provide daily and weekly reports as required and to ensure that all service levels and objectives are achieved Provide a positive and innovative input into the team, through provision of solutions to problems and embracing change Ensure that safety issues are reported in line with Company procedures Experience and Qualifications Training will be given in the below SHEA (Gas) NRSWA 1991 (Supervisor) SCO 1,2 & 5 (preferred) IOSH or SMSTS (preferred) NCO Gas Level 2 / Gas managers appreciation Salary and Benefits We offer a competitive salary based on experience along with a full benefits package. Network Plus is proud to be an Equal Opportunity Employer. We celebrate diversity and do not discriminate based on race, religion, colour, nationality, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. We are Armed Forces-friendly. We welcome applications from ex-Armed Forces personnel, reservists, armed forces veterans, cadet instructors and military spouses/partners. We understand that privacy and the security of your personal information is extremely important. By applying for this role, you agree to the terms of our privacy policy. About Network Plus Network Plus is an award-winning business delivering essential utility and infrastructure services for the UKs major providers of gas, power, telecoms, transport, water, and wastewater. We value the variety of experience, perspective, and other points of difference our workforce, clients, and supply chain offer. We are actively working with colleagues across the Network Plus Group to develop an inclusive environment we want all our employees to feel valued and included to enable everyone to thrive at work and understand the value of their contribution matters no matter their background, identity, or circumstances. JBRP1_UKTJ
Mechanical Design Engineer (IWOCS / Wheels / Winches) £64,000 - £76,000 + Pension + Bonus + Flexible Working Hours + Pay and Role Progression + Company Benefits Aberdeen Are you a Mechanical Design Engineer with a background in the oil and gas industry, industrial lifting equipment or deck machinery, looking for a varied and hands-on role within an Engineering Consultancy that supplies tailored solutions, equipment and personnel packages for the global energy sectors? Are you looking to become immersed and take the lead as an integral part of the Design Team, where you will be responsible for effectively delivering assigned design ventures of high-value projects across a range of applications within the lifting and offshore sectors? On offer is the opportunity to work within a close-knit design team, where you will be responsible for providing mechanical engineering expertise to support the design, fabrication, and operation of equipment such as Carousels, Tensioners, Reel drives, Handling Equipment, Winches and associated machinery. The Role: Undertake mechanical engineering activities across projects, including equipment design, design verification and lifting analysis Preparing, checking and/or approving design calculations, reports, manufacturing drawings, layout drawings, and associated documentation to recognised codes and standards (e.g., DNV, FEM, Lloyds, AISC, LOLER, PUWER, HSAW.) Carry out mechanical analysis and calculations using software such as FS2000/Staad, Mathcad and FEA software Collaborate and contribute to the compilation of Factory acceptance documents Generate engineering documents in the form of design packages, reports and technical notes Drive component selection for equipment such as Carousels, Tensioners, Reel Drives, Handling Equipment, Winches and associated equipment The Person: Degree-qualified Mechanical or Marine Engineer preferred or minimum HND in Mechanical or Marine Engineering discipline backed with a high level of relevant experience Proven experience in mechanical design of equipment such as Carousels, Winches, Electro-hydraulic handling equipment, Tensioners and Reel Drive Systems If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH25889 We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ
Jun 25, 2026
Full time
Mechanical Design Engineer (IWOCS / Wheels / Winches) £64,000 - £76,000 + Pension + Bonus + Flexible Working Hours + Pay and Role Progression + Company Benefits Aberdeen Are you a Mechanical Design Engineer with a background in the oil and gas industry, industrial lifting equipment or deck machinery, looking for a varied and hands-on role within an Engineering Consultancy that supplies tailored solutions, equipment and personnel packages for the global energy sectors? Are you looking to become immersed and take the lead as an integral part of the Design Team, where you will be responsible for effectively delivering assigned design ventures of high-value projects across a range of applications within the lifting and offshore sectors? On offer is the opportunity to work within a close-knit design team, where you will be responsible for providing mechanical engineering expertise to support the design, fabrication, and operation of equipment such as Carousels, Tensioners, Reel drives, Handling Equipment, Winches and associated machinery. The Role: Undertake mechanical engineering activities across projects, including equipment design, design verification and lifting analysis Preparing, checking and/or approving design calculations, reports, manufacturing drawings, layout drawings, and associated documentation to recognised codes and standards (e.g., DNV, FEM, Lloyds, AISC, LOLER, PUWER, HSAW.) Carry out mechanical analysis and calculations using software such as FS2000/Staad, Mathcad and FEA software Collaborate and contribute to the compilation of Factory acceptance documents Generate engineering documents in the form of design packages, reports and technical notes Drive component selection for equipment such as Carousels, Tensioners, Reel Drives, Handling Equipment, Winches and associated equipment The Person: Degree-qualified Mechanical or Marine Engineer preferred or minimum HND in Mechanical or Marine Engineering discipline backed with a high level of relevant experience Proven experience in mechanical design of equipment such as Carousels, Winches, Electro-hydraulic handling equipment, Tensioners and Reel Drive Systems If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH25889 We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ
F-GAS Technician Up to £40,000 starting salary (£20.50ph) Location: Alton (15 minutes drive from Basingstoke) Hours: 8am to 4pm Monday Friday, 37.5 hours per week Overtime: Daily at 1.5x basic rate Duration: Permanent Syntech Recruitment are excited to be supporting an aviation overhaul and repair business based in Alton, who are looking to expand their team with an experienced F-GAS Technician . This is a fantastic opportunity for someone with refrigeration, HVAC, white goods, cooling systems, or electro-mechanical repair experience looking to move into a highly regulated aviation environment. What s in it for you? Work in a specialist aviation repair environment Daily overtime at 1.5x basic rate 25 days holiday + bank holidays Opportunity to apply transferable skills from industries such as refrigeration, HVAC, white goods, or electronics repair Stable Monday Friday working hours What you ll be doing: Diagnosing and repairing refrigeration and electro-mechanical systems Reading schematic drawings and circuit diagrams to fault find and complete repairs Carrying out soldering, testing, refurbishment and component replacement work Using multimeters, gauges and workshop equipment to carry out diagnostics Working on systems containing refrigerants in line with F-GAS regulations Completing work to CAA, EASA and FAA Part 145 standards Maintaining accurate records using Microsoft Office and the MRP system Ensuring all work cards and job packs are completed correctly What we re looking for: F-GAS certification or strong practical exposure to refrigerant-based systems Experience in refrigeration, HVAC, white goods, cooling systems, or electro-mechanical repair Strong fault-finding and diagnostic skills Ability to read schematic and engineering drawings Experience using workshop tools, meters and testing equipment Computer literate (Microsoft Office & MRP systems) Previous aviation experience is beneficial but not essential This role would suit someone with a hands-on technical background, strong diagnostic ability, and experience working on refrigeration or electro-mechanical systems who is looking to develop their career within the aviation sector. Apply today! INDZ
Jun 25, 2026
Full time
F-GAS Technician Up to £40,000 starting salary (£20.50ph) Location: Alton (15 minutes drive from Basingstoke) Hours: 8am to 4pm Monday Friday, 37.5 hours per week Overtime: Daily at 1.5x basic rate Duration: Permanent Syntech Recruitment are excited to be supporting an aviation overhaul and repair business based in Alton, who are looking to expand their team with an experienced F-GAS Technician . This is a fantastic opportunity for someone with refrigeration, HVAC, white goods, cooling systems, or electro-mechanical repair experience looking to move into a highly regulated aviation environment. What s in it for you? Work in a specialist aviation repair environment Daily overtime at 1.5x basic rate 25 days holiday + bank holidays Opportunity to apply transferable skills from industries such as refrigeration, HVAC, white goods, or electronics repair Stable Monday Friday working hours What you ll be doing: Diagnosing and repairing refrigeration and electro-mechanical systems Reading schematic drawings and circuit diagrams to fault find and complete repairs Carrying out soldering, testing, refurbishment and component replacement work Using multimeters, gauges and workshop equipment to carry out diagnostics Working on systems containing refrigerants in line with F-GAS regulations Completing work to CAA, EASA and FAA Part 145 standards Maintaining accurate records using Microsoft Office and the MRP system Ensuring all work cards and job packs are completed correctly What we re looking for: F-GAS certification or strong practical exposure to refrigerant-based systems Experience in refrigeration, HVAC, white goods, cooling systems, or electro-mechanical repair Strong fault-finding and diagnostic skills Ability to read schematic and engineering drawings Experience using workshop tools, meters and testing equipment Computer literate (Microsoft Office & MRP systems) Previous aviation experience is beneficial but not essential This role would suit someone with a hands-on technical background, strong diagnostic ability, and experience working on refrigeration or electro-mechanical systems who is looking to develop their career within the aviation sector. Apply today! INDZ
Hours 9:00am to 5:00pm 30-minute lunch break. (no hybrid working) About us: JCW Apleona is a reputable and well-established Building Services company specialising in M&E Engineering including commercial gas and HVAC maintenance Close working relationships with high profile clients meaning long term contracts and security Dedicated to all aspects of maintenance and repair on a wide range of appliance click apply for full job details
Jun 24, 2026
Full time
Hours 9:00am to 5:00pm 30-minute lunch break. (no hybrid working) About us: JCW Apleona is a reputable and well-established Building Services company specialising in M&E Engineering including commercial gas and HVAC maintenance Close working relationships with high profile clients meaning long term contracts and security Dedicated to all aspects of maintenance and repair on a wide range of appliance click apply for full job details
Development Engineer Company Overview: For over 75 years, WIKA has been a renowned partner and competent specialist for any task in the field of measurement technology. With steadily growing efficiency, innovative technologies are applied when developing new products and system solutions. The reliability of the products and the readiness to face all challenges of the market have been the key factors for WIKA achieving a leading position in the global market. Within the WIKA Group, currently 11,200 employees are dedicated to maintain and improve technology in pressure, temperature, force and level measurement, and also in the fields of flow measurement, calibration and SF 6 gas solutions. WIKA Optical Sensing Ltd, previously known as Oxsensis, was acquired by WIKA in 2023 and brings expertise in optical sensing technology, particularly for pressure and temperature measurement. Your Activities: Supporting WIKA Optical Sensing systems design from hardware and software perspective. Working on prototype solution implementation including hardware assembly and software. Working together with test engineers on planning, setting up development tests, creating test solutions and software for control and data acquisition. Analysing test data (from internal & external testing), writing meaningful reports. Working with component suppliers and sub-contractors for product development and test (validation). Preparing clear documentation for further product development and industrialisation. Your Profile: Essential experience: Degree in relevant discipline (Physics, Electronics, Systems, Computer engineering) Building complex hardware systems including electronics components, various interfaces and interconnects, etc. Software development for PC and test hardware (LabVIEW, Python, etc.) Signal processing knowledge (signal conditioning, frequency analysis, statistics, etc.) Strong analytical and problem-solving skills Ability to go beyond the scope and learn new areas Desirable: Electronics design exposure with degree of understand of analog (EMC safety, analog signal interfaces, etc.) and digital part (ADCs/DACs, digital signal processing) Qualifications / type testing of products and new product introductions. Compliance with CE requirements by design/test (EMC, Safety requirements, etc.) Certified LabVIEW developer or extensive experience. Project management skills. Development Engineer
Jun 24, 2026
Full time
Development Engineer Company Overview: For over 75 years, WIKA has been a renowned partner and competent specialist for any task in the field of measurement technology. With steadily growing efficiency, innovative technologies are applied when developing new products and system solutions. The reliability of the products and the readiness to face all challenges of the market have been the key factors for WIKA achieving a leading position in the global market. Within the WIKA Group, currently 11,200 employees are dedicated to maintain and improve technology in pressure, temperature, force and level measurement, and also in the fields of flow measurement, calibration and SF 6 gas solutions. WIKA Optical Sensing Ltd, previously known as Oxsensis, was acquired by WIKA in 2023 and brings expertise in optical sensing technology, particularly for pressure and temperature measurement. Your Activities: Supporting WIKA Optical Sensing systems design from hardware and software perspective. Working on prototype solution implementation including hardware assembly and software. Working together with test engineers on planning, setting up development tests, creating test solutions and software for control and data acquisition. Analysing test data (from internal & external testing), writing meaningful reports. Working with component suppliers and sub-contractors for product development and test (validation). Preparing clear documentation for further product development and industrialisation. Your Profile: Essential experience: Degree in relevant discipline (Physics, Electronics, Systems, Computer engineering) Building complex hardware systems including electronics components, various interfaces and interconnects, etc. Software development for PC and test hardware (LabVIEW, Python, etc.) Signal processing knowledge (signal conditioning, frequency analysis, statistics, etc.) Strong analytical and problem-solving skills Ability to go beyond the scope and learn new areas Desirable: Electronics design exposure with degree of understand of analog (EMC safety, analog signal interfaces, etc.) and digital part (ADCs/DACs, digital signal processing) Qualifications / type testing of products and new product introductions. Compliance with CE requirements by design/test (EMC, Safety requirements, etc.) Certified LabVIEW developer or extensive experience. Project management skills. Development Engineer
Job Description Summary About the role Ready to bring your skills into a role where your thinking, problem-solving and technical curiosity can help power the future? Our Lead Control & Protection Engineer role offers someone with transferable strengths, fresh perspectives and the drive to learn the opportunity to grow and make an impact on the energy transition. This role would suit an engineer with strong systems thinking, modelling, analysis, and technical leadership skills who wants to apply their expertise in a new domain. You may come from adjacent industries such as power systems, electrical engineering, automation, simulation, controls, protection, rail, aerospace, oil and gas, utilities, or other complex engineering environments where safety, reliability, and technical rigour are essential. Job Description What you will do: • Lead and contribute to the design, modelling, verification, and validation of control and protection functions • Build and use simulation models to assess system behaviour and performance • Review technical solutions, identify risks, and propose safe, reliable, and compliant approaches • Support dynamic performance studies and investigate system behaviour under fault and disturbance conditions Technical Skills we are looking for: • An understanding of how HVDC systems support the reliable transfer of power and the core elements that bring the system together. • The ability to read simple technical diagrams and understand the role of key equipment, signals and interfaces within a system. • Confidence in building and running simple models with guidance, checking results carefully and using data to support clear, reliable conclusions. • A structured approach to control system configuration, testing and troubleshooting, with an understanding of how information moves through a system. • The ability to support routine studies, interpret results and spot when outputs need closer review or further investigation. About you: We're looking for someone who enjoys working with others, takes ownership and turns complex information into practical action. Someone who looks for better ways of working, brings ideas that improve how we deliver, stays motivated when priorities change and adapts quickly to new challenges. In this role, you help shape reliable solutions that make a real difference to our customers and the energy transition. You do not need to have worked in HVDC before if you can demonstrate the right transferable skills, a strong learning mindset, and the ability to work with complex systems. Why join us: This is a chance to work on complex, high-impact engineering challenges with a collaborative team. You'll have the opportunity to develop deep specialist knowledge while bringing fresh thinking from outside the industry and develop existing and new skills. Additional Information Relocation Assistance Provided: No
Jun 24, 2026
Full time
Job Description Summary About the role Ready to bring your skills into a role where your thinking, problem-solving and technical curiosity can help power the future? Our Lead Control & Protection Engineer role offers someone with transferable strengths, fresh perspectives and the drive to learn the opportunity to grow and make an impact on the energy transition. This role would suit an engineer with strong systems thinking, modelling, analysis, and technical leadership skills who wants to apply their expertise in a new domain. You may come from adjacent industries such as power systems, electrical engineering, automation, simulation, controls, protection, rail, aerospace, oil and gas, utilities, or other complex engineering environments where safety, reliability, and technical rigour are essential. Job Description What you will do: • Lead and contribute to the design, modelling, verification, and validation of control and protection functions • Build and use simulation models to assess system behaviour and performance • Review technical solutions, identify risks, and propose safe, reliable, and compliant approaches • Support dynamic performance studies and investigate system behaviour under fault and disturbance conditions Technical Skills we are looking for: • An understanding of how HVDC systems support the reliable transfer of power and the core elements that bring the system together. • The ability to read simple technical diagrams and understand the role of key equipment, signals and interfaces within a system. • Confidence in building and running simple models with guidance, checking results carefully and using data to support clear, reliable conclusions. • A structured approach to control system configuration, testing and troubleshooting, with an understanding of how information moves through a system. • The ability to support routine studies, interpret results and spot when outputs need closer review or further investigation. About you: We're looking for someone who enjoys working with others, takes ownership and turns complex information into practical action. Someone who looks for better ways of working, brings ideas that improve how we deliver, stays motivated when priorities change and adapts quickly to new challenges. In this role, you help shape reliable solutions that make a real difference to our customers and the energy transition. You do not need to have worked in HVDC before if you can demonstrate the right transferable skills, a strong learning mindset, and the ability to work with complex systems. Why join us: This is a chance to work on complex, high-impact engineering challenges with a collaborative team. You'll have the opportunity to develop deep specialist knowledge while bringing fresh thinking from outside the industry and develop existing and new skills. Additional Information Relocation Assistance Provided: No
Job Description Summary Job Description Do you want to provide electrical leadership at one of the world's most unique, large-scale power and propulsion testing facilities? GE Vernova is looking for an exceptional Lead Power Systems & Test Engineer to join our Electrification team based in Whetstone, UK. GE Vernova - The Energy to Change the World With over 130 years of experience and proven innovation, GE Vernova is leading a new era of energy. We are electrifying the world while working to decarbonize it. Our name reflects our mission. "GE" carries a legacy of quality and ingenuity. "Ver" signals Earth's lush ecosystems, while "Nova" nods to a new era of lower-carbon energy we are helping to deliver. Focused on the future, GE Vernova is accelerating the shift to reliable, affordable, and sustainable energy. We help customers power economies and deliver electricity vital to health, safety, and quality of life. Electrification Our Electrification solutions modernize grids, enable renewable integration, and strengthen energy systems. From software to power conversion and storage, we help create smarter, more resilient energy networks. GE's Power Conversion & Storage business, part of GE Vernova, provides electrification systems that are critical to customers' power and energy needs for their high-performance applications. We work with some of the world's major energy, maritime and industrial organizations, helping to enable a transition to energy efficiency and decarbonization, including through our specialist motors, drives and control technologies. Let's Talk about the Role As Lead Power Systems & Test Engineer, you provide electrical leadership for the Marine Power Test Facility, balancing the maintenance of existing infrastructure with the installation, commissioning, and testing of new power systems and equipment. Reporting directly to the Marine Power Test & Trials Manager. You will be a key member of the Marine Power Test Facility, engineering test and commissioning team. You act as a key member of the engineering, test, and commissioning team, ensuring that all work meets the highest standards of safety, quality, and regulatory compliance. You manage safe systems of work as a Senior Authorised Person (SAP), coordinate complex site activities, and collaborate with leadership to drive process and system improvements that ensure our world-class facility remains at the cutting edge of power and propulsion technology. How You Will Make a Difference To be competent and have a proven record of HV/LV plant and systems commissioning. To carry out switching operations and the operation of permit to work, sanction to test and access limitation systems on large projects. Be competent to produce, and maintain, documentation to the required standards. Undertake installation and commissioning of cabling, switchboards, circuit breakers, contactors, transformers, UPS systems, generators and motors, power conversion / converters ensuring the overall installation, commissioning and test meets internal standards customer, and all regulatory / safety requirements. Manage the upkeep and maintenance requirements of the facility and specific systems and equipment. To produce as commissioned, tested and maintenance documentation in accordance with independently audited Company Quality and Safety Management Systems e.g. BS EN 18001 and Classification Societies e.g. Lloyds Register and DNV. Supervise test, trials and control room operations in line with approved procedures and safe working practices. Establish and manage design documentation and drawings control as necessary. Working with site leadership and EHS, manage safe systems of work, risk assessments and method statements associated with electrical work and testing. Comply with all company and customer health and safety regulations. Supervise Permit and LOTO systems as a SAP at MPTF. Skills for Success You are an experienced, safety-focused electrical professional who brings a practical site-based background and the leadership ability to manage complex high-voltage systems and test programmes. Qualifications/Requirements Electrical HV authorised & some experience in managing safe systems of work. Proven record of continuous professional development. Must have established record of sitework. Good communication skills, written and verbal in English. Customer Focused. Existing or the ability to obtain the higher levels of UK Security Clearance including "SC Clearance" and "UK Eyes Only Clearance " which are required for this role. Desired Characteristics Experience of system integration working on multi-discipline projects. On site commissioning of large projects. Electrical engineering in relevant industry (Marine, Energy, Renewables, Oil & Gas, etc.). Experience in integrated control schemes with PLCs, HMI and Drives. Power generation and distribution. LV and MV variable speed drives and motors. Ability to multi-task on a variety of projects to strict time scales. Excellent communication skills. Good report writing skills. Good personal organisational skills. Where and how you'll work This is a permanent position based in our Whetstone, UK office. This role is on-site 5 days a week. Our Culture Every action shapes our future. That's why our north star is a culture of impact, where everyone is empowered to thrive and achieve. Addressing the urgent need to build a more sustainable electric power system while improving the trajectory of climate change emissions are global priorities, and we take our responsibility seriously. That is our mission at GE Vernova: continuing to electrify to thrive and decarbonize the world. We play a significant role in leading a new era of energy. Our technology helps generate approximately twenty-five percent of the world's electricity today, and we are working to power the rest. If we want the future of energy to be different, then join us and be the difference. Together, we are the Energy of Change! We're determined to be the best place to grow We believe that strong careers are built on a variety of experiences, strong connections, and continuous development. We're committed to providing you the tools to navigate and shape a strong career journey that aligns with a healthy work-life balance. No two careers are the same, and yours should reflect your personal and professional goals. Your people leader and trusted mentors will support you through navigating your journey. We also prioritize fair pay, performance-based rewards, and wellbeing programs for you and your family. With opportunities to move across teams and functions, your career can keep evolving while sustainability stays at the core of everything we do. Inclusion & Diversity We are passionate about creating an inclusive work environment. By valuing the ideas and contributions of a diverse workforce we help inspire others to grow, succeed, and raise the bar for everyone. As an equal opportunity and affirmative action employer, GE Vernova is committed to support disadvantaged groups whilst providing equal opportunities for both GE Vernova associates and applicants alike. Join us at GE Vernova where results can be achieved by embracing a community of belonging. Additional Information Relocation Assistance Provided: No
Jun 24, 2026
Full time
Job Description Summary Job Description Do you want to provide electrical leadership at one of the world's most unique, large-scale power and propulsion testing facilities? GE Vernova is looking for an exceptional Lead Power Systems & Test Engineer to join our Electrification team based in Whetstone, UK. GE Vernova - The Energy to Change the World With over 130 years of experience and proven innovation, GE Vernova is leading a new era of energy. We are electrifying the world while working to decarbonize it. Our name reflects our mission. "GE" carries a legacy of quality and ingenuity. "Ver" signals Earth's lush ecosystems, while "Nova" nods to a new era of lower-carbon energy we are helping to deliver. Focused on the future, GE Vernova is accelerating the shift to reliable, affordable, and sustainable energy. We help customers power economies and deliver electricity vital to health, safety, and quality of life. Electrification Our Electrification solutions modernize grids, enable renewable integration, and strengthen energy systems. From software to power conversion and storage, we help create smarter, more resilient energy networks. GE's Power Conversion & Storage business, part of GE Vernova, provides electrification systems that are critical to customers' power and energy needs for their high-performance applications. We work with some of the world's major energy, maritime and industrial organizations, helping to enable a transition to energy efficiency and decarbonization, including through our specialist motors, drives and control technologies. Let's Talk about the Role As Lead Power Systems & Test Engineer, you provide electrical leadership for the Marine Power Test Facility, balancing the maintenance of existing infrastructure with the installation, commissioning, and testing of new power systems and equipment. Reporting directly to the Marine Power Test & Trials Manager. You will be a key member of the Marine Power Test Facility, engineering test and commissioning team. You act as a key member of the engineering, test, and commissioning team, ensuring that all work meets the highest standards of safety, quality, and regulatory compliance. You manage safe systems of work as a Senior Authorised Person (SAP), coordinate complex site activities, and collaborate with leadership to drive process and system improvements that ensure our world-class facility remains at the cutting edge of power and propulsion technology. How You Will Make a Difference To be competent and have a proven record of HV/LV plant and systems commissioning. To carry out switching operations and the operation of permit to work, sanction to test and access limitation systems on large projects. Be competent to produce, and maintain, documentation to the required standards. Undertake installation and commissioning of cabling, switchboards, circuit breakers, contactors, transformers, UPS systems, generators and motors, power conversion / converters ensuring the overall installation, commissioning and test meets internal standards customer, and all regulatory / safety requirements. Manage the upkeep and maintenance requirements of the facility and specific systems and equipment. To produce as commissioned, tested and maintenance documentation in accordance with independently audited Company Quality and Safety Management Systems e.g. BS EN 18001 and Classification Societies e.g. Lloyds Register and DNV. Supervise test, trials and control room operations in line with approved procedures and safe working practices. Establish and manage design documentation and drawings control as necessary. Working with site leadership and EHS, manage safe systems of work, risk assessments and method statements associated with electrical work and testing. Comply with all company and customer health and safety regulations. Supervise Permit and LOTO systems as a SAP at MPTF. Skills for Success You are an experienced, safety-focused electrical professional who brings a practical site-based background and the leadership ability to manage complex high-voltage systems and test programmes. Qualifications/Requirements Electrical HV authorised & some experience in managing safe systems of work. Proven record of continuous professional development. Must have established record of sitework. Good communication skills, written and verbal in English. Customer Focused. Existing or the ability to obtain the higher levels of UK Security Clearance including "SC Clearance" and "UK Eyes Only Clearance " which are required for this role. Desired Characteristics Experience of system integration working on multi-discipline projects. On site commissioning of large projects. Electrical engineering in relevant industry (Marine, Energy, Renewables, Oil & Gas, etc.). Experience in integrated control schemes with PLCs, HMI and Drives. Power generation and distribution. LV and MV variable speed drives and motors. Ability to multi-task on a variety of projects to strict time scales. Excellent communication skills. Good report writing skills. Good personal organisational skills. Where and how you'll work This is a permanent position based in our Whetstone, UK office. This role is on-site 5 days a week. Our Culture Every action shapes our future. That's why our north star is a culture of impact, where everyone is empowered to thrive and achieve. Addressing the urgent need to build a more sustainable electric power system while improving the trajectory of climate change emissions are global priorities, and we take our responsibility seriously. That is our mission at GE Vernova: continuing to electrify to thrive and decarbonize the world. We play a significant role in leading a new era of energy. Our technology helps generate approximately twenty-five percent of the world's electricity today, and we are working to power the rest. If we want the future of energy to be different, then join us and be the difference. Together, we are the Energy of Change! We're determined to be the best place to grow We believe that strong careers are built on a variety of experiences, strong connections, and continuous development. We're committed to providing you the tools to navigate and shape a strong career journey that aligns with a healthy work-life balance. No two careers are the same, and yours should reflect your personal and professional goals. Your people leader and trusted mentors will support you through navigating your journey. We also prioritize fair pay, performance-based rewards, and wellbeing programs for you and your family. With opportunities to move across teams and functions, your career can keep evolving while sustainability stays at the core of everything we do. Inclusion & Diversity We are passionate about creating an inclusive work environment. By valuing the ideas and contributions of a diverse workforce we help inspire others to grow, succeed, and raise the bar for everyone. As an equal opportunity and affirmative action employer, GE Vernova is committed to support disadvantaged groups whilst providing equal opportunities for both GE Vernova associates and applicants alike. Join us at GE Vernova where results can be achieved by embracing a community of belonging. Additional Information Relocation Assistance Provided: No
Gas Engineer £37,000 - £38,000 Permanent Chesterfield Hamilton Woods Associates are currently working on behalf of a social housing provider in Chesterfield to recruit to a Gas Engineer on a permanent basis. Responsibilities of the Gas Engineer include: Working within tenanted and void social housing properties Carrying out repair, renewal, installs & safety checks Ensuring tenant satisfaction Working closely with the compliance team in ensuring work is undertaken safely Utilising a PDA Completing necessary paperwork Requirements of the Gas Engineer include: UK Driving License Relevant gas tickets (CCN1, CENWAT, CKR1, HTR1, CPA1) Level 2 or 3 NVQ in Gas & Plumbing To be considered for this exciting role, please contact Connor Lamb - Recruitment Consultant at Hamilton Woods on or apply online with a covering note of your experience and suitability referencing the job ID number. Due to the exceptionally high level of applications if you have not heard back from HWA within 7 - 10 days, it is regrettable that we cannot respond to all applicants, and please assume your application has been unsuccessful. JBRP1_UKTJ
Jun 24, 2026
Full time
Gas Engineer £37,000 - £38,000 Permanent Chesterfield Hamilton Woods Associates are currently working on behalf of a social housing provider in Chesterfield to recruit to a Gas Engineer on a permanent basis. Responsibilities of the Gas Engineer include: Working within tenanted and void social housing properties Carrying out repair, renewal, installs & safety checks Ensuring tenant satisfaction Working closely with the compliance team in ensuring work is undertaken safely Utilising a PDA Completing necessary paperwork Requirements of the Gas Engineer include: UK Driving License Relevant gas tickets (CCN1, CENWAT, CKR1, HTR1, CPA1) Level 2 or 3 NVQ in Gas & Plumbing To be considered for this exciting role, please contact Connor Lamb - Recruitment Consultant at Hamilton Woods on or apply online with a covering note of your experience and suitability referencing the job ID number. Due to the exceptionally high level of applications if you have not heard back from HWA within 7 - 10 days, it is regrettable that we cannot respond to all applicants, and please assume your application has been unsuccessful. JBRP1_UKTJ
Owen Daniels are supporting a highly regarded global engineering and manufacturing business, supplying advanced fluid-flow and mechanical systems into a wide range of industrial and commercial applications. With a strong reputation for technical excellence, innovation and quality, they are now looking to appoint an experienced Quality Engineer to support product quality, inspection activity and continuous improvement across their manufacturing operation.This is an excellent opportunity for a hands-on Quality Engineer with experience in mechanical or electromechanical fabrication, modular systems, pressure-related assemblies or engineered manufacturing environments , who is comfortable working across inspection, documentation, compliance and problem-solving activities within a busy production setting.The RoleReporting to the Quality Engineering Lead, the Quality Engineer will be responsible for maintaining and improving the quality of products delivered by the manufacturing site. The successful candidate will be confident working on the shop floor, supporting production teams, reviewing technical documentation, coordinating inspection and testing activity, and driving quality improvements through structured root cause analysis and corrective action.Key Responsibilities Oversee and coordinate incoming, in-process and final inspection activities to ensure products meet defined quality standards and customer requirements Carry out or support dimensional and visual checks against GA drawings, isometrics, specifications and build documentation Verify key assembly requirements including bolt torque, gasket type, tagging, flow direction and build configuration Support and coordinate NDT activities where required, including review of reports and close-out of findings Improve inspection efficiency through the application of appropriate sampling methods, inspection planning and quality controls Provide technical guidance to inspectors and production teams to ensure consistency and accuracy of inspection activities Standards, Compliance & Documentation Ensure manufactured builds conform to drawings, specifications, P&IDs, isometrics and relevant quality or regulatory standards Support compliance with standards such as ISO 9001 , pressure equipment and piping requirements, and other applicable customer or project specifications Maintain material and device traceability, including heat number traceability , calibrated equipment control and documentation of quality records Create and maintain Inspection & Test Plans (ITPs), quality plans, inspection checklists, weld maps and related manufacturing quality documentation Manage non-conformance reports (NCRs), concessions and corrective actions , ensuring robust containment and timely close-out Compile and review quality dossiers / manufacturing record packs including material certification, welding documentation, NDT reports, pressure test records, electrical test certification and FAT documentation Problem Solving & Continuous Improvement Lead and support the site NCR / CAPA process , applying structured problem-solving tools such as 5 Whys, Ishikawa and root cause analysis Analyse recurring quality issues, defect trends and first-pass yield performance to identify chronic manufacturing issues and drive sustainable improvements Work with production and engineering teams to reduce rework, improve build quality and increase right-first-time performance Feed manufacturability and quality improvement opportunities back into Collaboration & Shop Floor Support Work closely with Production, Engineering, Project Management and Supply Chain teams to provide clear visibility of quality status, risk and required actions Coach and support shop floor personnel including fitters, welders and assembly technicians on inspection criteria, cleanliness standards, testing requirements and quality expectations Candidate Requirements Proven experience in a Quality Engineer, Manufacturing Quality Engineer or Product Quality role within a mechanical, electromechanical or engineered manufacturing environment Strong practical experience of inspection, build verification and quality control within fabrication, modular systems, pressure assemblies, pipework or similar manufacturing operations Ability to read and interpret P&IDs, isometric drawings, GA drawings, electrical schematics, data sheets and technical specifications Hands-on knowledge of precision measurement, pressure testing, torque verification and basic electrical test methods Experience with material traceability, weld quality documentation, NDT coordination and inspection records Good understanding of ISO 9001 quality systems , NCR/CAPA processes and manufacturing documentation control Strong problem-solving skills with experience using root cause analysis and corrective action tools Confident communicator who is comfortable engaging with production teams, suppliers, customers and third-party inspectors Practical, detail-focused and able to work effectively in a fast-paced manufacturing environment If this role is of interest, please apply now to hear more.
Jun 24, 2026
Full time
Owen Daniels are supporting a highly regarded global engineering and manufacturing business, supplying advanced fluid-flow and mechanical systems into a wide range of industrial and commercial applications. With a strong reputation for technical excellence, innovation and quality, they are now looking to appoint an experienced Quality Engineer to support product quality, inspection activity and continuous improvement across their manufacturing operation.This is an excellent opportunity for a hands-on Quality Engineer with experience in mechanical or electromechanical fabrication, modular systems, pressure-related assemblies or engineered manufacturing environments , who is comfortable working across inspection, documentation, compliance and problem-solving activities within a busy production setting.The RoleReporting to the Quality Engineering Lead, the Quality Engineer will be responsible for maintaining and improving the quality of products delivered by the manufacturing site. The successful candidate will be confident working on the shop floor, supporting production teams, reviewing technical documentation, coordinating inspection and testing activity, and driving quality improvements through structured root cause analysis and corrective action.Key Responsibilities Oversee and coordinate incoming, in-process and final inspection activities to ensure products meet defined quality standards and customer requirements Carry out or support dimensional and visual checks against GA drawings, isometrics, specifications and build documentation Verify key assembly requirements including bolt torque, gasket type, tagging, flow direction and build configuration Support and coordinate NDT activities where required, including review of reports and close-out of findings Improve inspection efficiency through the application of appropriate sampling methods, inspection planning and quality controls Provide technical guidance to inspectors and production teams to ensure consistency and accuracy of inspection activities Standards, Compliance & Documentation Ensure manufactured builds conform to drawings, specifications, P&IDs, isometrics and relevant quality or regulatory standards Support compliance with standards such as ISO 9001 , pressure equipment and piping requirements, and other applicable customer or project specifications Maintain material and device traceability, including heat number traceability , calibrated equipment control and documentation of quality records Create and maintain Inspection & Test Plans (ITPs), quality plans, inspection checklists, weld maps and related manufacturing quality documentation Manage non-conformance reports (NCRs), concessions and corrective actions , ensuring robust containment and timely close-out Compile and review quality dossiers / manufacturing record packs including material certification, welding documentation, NDT reports, pressure test records, electrical test certification and FAT documentation Problem Solving & Continuous Improvement Lead and support the site NCR / CAPA process , applying structured problem-solving tools such as 5 Whys, Ishikawa and root cause analysis Analyse recurring quality issues, defect trends and first-pass yield performance to identify chronic manufacturing issues and drive sustainable improvements Work with production and engineering teams to reduce rework, improve build quality and increase right-first-time performance Feed manufacturability and quality improvement opportunities back into Collaboration & Shop Floor Support Work closely with Production, Engineering, Project Management and Supply Chain teams to provide clear visibility of quality status, risk and required actions Coach and support shop floor personnel including fitters, welders and assembly technicians on inspection criteria, cleanliness standards, testing requirements and quality expectations Candidate Requirements Proven experience in a Quality Engineer, Manufacturing Quality Engineer or Product Quality role within a mechanical, electromechanical or engineered manufacturing environment Strong practical experience of inspection, build verification and quality control within fabrication, modular systems, pressure assemblies, pipework or similar manufacturing operations Ability to read and interpret P&IDs, isometric drawings, GA drawings, electrical schematics, data sheets and technical specifications Hands-on knowledge of precision measurement, pressure testing, torque verification and basic electrical test methods Experience with material traceability, weld quality documentation, NDT coordination and inspection records Good understanding of ISO 9001 quality systems , NCR/CAPA processes and manufacturing documentation control Strong problem-solving skills with experience using root cause analysis and corrective action tools Confident communicator who is comfortable engaging with production teams, suppliers, customers and third-party inspectors Practical, detail-focused and able to work effectively in a fast-paced manufacturing environment If this role is of interest, please apply now to hear more.
Commercial Gas Engineer - M1 Corridor Up to £48,000 Basic + Door-to-Door Travel + On-Call + Overtime + Company Van Ready for a role where your skills are valued and no two days are the same? We're working with a growing and highly respected provider of bespoke energy and building services solutions who are looking to add an experienced Commercial Gas Engineer to their team. This is an opportunity to join a business that invests in its people, works with a diverse range of commercial and industrial clients, and offers genuine variety in the day-to-day role. You'll be trusted to manage your own workload, solve technical challenges, and deliver first-class service across a portfolio of customer sites along the M1 corridor. The Role As a Commercial Gas Engineer, you'll be responsible for servicing, maintaining, repairing and commissioning a wide range of commercial and industrial heating systems. You'll be the technical expert on site, diagnosing faults, providing solutions and ensuring systems operate safely and efficiently. Key Responsibilities Service, maintain and repair commercial boilers, forced-draught burners, water heaters, warm air units and radiant tube heaters Diagnose faults and carry out effective repairs across a range of gas-fired equipment Commission boilers, burners, water heaters and warm air systems Test and purge pipework systems in line with IGEM/UP/1A and IGEM/UP/1 standards Participate in a paid on-call rota Work closely with the helpdesk and operations teams to achieve service level agreements Follow site-specific RAMS and company procedures Ensure all work is completed in accordance with current legislation and industry best practice What We're Looking For Current Commercial Gas qualifications including COCN1, CORT1, CIGA1, TPCP1 & 1A and ICPN1 Strong fault-finding and diagnostic skills Experience using electrical testing equipment Completed industry-recognised apprenticeship Full UK driving licence Self-motivated and capable of working independently Professional, reliable and customer-focused approach Confident using handheld electronic devices Essential In addition to commercial gas duties, you must be willing to undertake ancillary mechanical and building services works as required, including plumbing, expansion vessel replacements, pump changes and actuator replacements, including wiring. What's in it for You? Up to £48,000 basic salary Door-to-door travel paid Regular overtime opportunities On-call payments Company van Long-term career stability with a growing business Varied and technically interesting work Supportive management team and strong engineering culture If you're looking for a role that offers autonomy, variety and the chance to work with a company that genuinely values its engineers, we'd love to hear from you. To apply, call Jo or send your CV today. startMonday is acting as a recruitment service in relation to this vacancy. JBRP1_UKTJ
Jun 24, 2026
Full time
Commercial Gas Engineer - M1 Corridor Up to £48,000 Basic + Door-to-Door Travel + On-Call + Overtime + Company Van Ready for a role where your skills are valued and no two days are the same? We're working with a growing and highly respected provider of bespoke energy and building services solutions who are looking to add an experienced Commercial Gas Engineer to their team. This is an opportunity to join a business that invests in its people, works with a diverse range of commercial and industrial clients, and offers genuine variety in the day-to-day role. You'll be trusted to manage your own workload, solve technical challenges, and deliver first-class service across a portfolio of customer sites along the M1 corridor. The Role As a Commercial Gas Engineer, you'll be responsible for servicing, maintaining, repairing and commissioning a wide range of commercial and industrial heating systems. You'll be the technical expert on site, diagnosing faults, providing solutions and ensuring systems operate safely and efficiently. Key Responsibilities Service, maintain and repair commercial boilers, forced-draught burners, water heaters, warm air units and radiant tube heaters Diagnose faults and carry out effective repairs across a range of gas-fired equipment Commission boilers, burners, water heaters and warm air systems Test and purge pipework systems in line with IGEM/UP/1A and IGEM/UP/1 standards Participate in a paid on-call rota Work closely with the helpdesk and operations teams to achieve service level agreements Follow site-specific RAMS and company procedures Ensure all work is completed in accordance with current legislation and industry best practice What We're Looking For Current Commercial Gas qualifications including COCN1, CORT1, CIGA1, TPCP1 & 1A and ICPN1 Strong fault-finding and diagnostic skills Experience using electrical testing equipment Completed industry-recognised apprenticeship Full UK driving licence Self-motivated and capable of working independently Professional, reliable and customer-focused approach Confident using handheld electronic devices Essential In addition to commercial gas duties, you must be willing to undertake ancillary mechanical and building services works as required, including plumbing, expansion vessel replacements, pump changes and actuator replacements, including wiring. What's in it for You? Up to £48,000 basic salary Door-to-door travel paid Regular overtime opportunities On-call payments Company van Long-term career stability with a growing business Varied and technically interesting work Supportive management team and strong engineering culture If you're looking for a role that offers autonomy, variety and the chance to work with a company that genuinely values its engineers, we'd love to hear from you. To apply, call Jo or send your CV today. startMonday is acting as a recruitment service in relation to this vacancy. JBRP1_UKTJ
Obsequio Group is looking for a Head of Projects based at their Dudley office. In this senior leadership position, you will ensure the successful delivery of gas suppression and fire alarm system installation projects, overseeing all phases of the project lifecycle while emphasizing project governance and safety compliance. Ideal candidates will have extensive experience in the mechanical suppression industry, strong leadership skills, and a knack for financial management. The role offers a competitive salary with additional benefits including a company vehicle and opportunities for professional development.
Jun 24, 2026
Full time
Obsequio Group is looking for a Head of Projects based at their Dudley office. In this senior leadership position, you will ensure the successful delivery of gas suppression and fire alarm system installation projects, overseeing all phases of the project lifecycle while emphasizing project governance and safety compliance. Ideal candidates will have extensive experience in the mechanical suppression industry, strong leadership skills, and a knack for financial management. The role offers a competitive salary with additional benefits including a company vehicle and opportunities for professional development.
My large Social Housing Client are now looking for Gas Service Only Sub-Contractors, covering the MK postcode area (Bedford area mainly). Please note this a high volume contract, 10+ jobs will be given per each day. Engineers will also be paid an additional amount for CO alarms . PRICE PER JOB = 25.00 + 3.00 for CO Alarms Average earnings 1,300 - 1,500 per week As this is a self-employed role the following is required: - ACS Certificate - Own Van - Gas Safe Registration - Public Liability Insurance - Calibration Certificate - Asbestos Awareness - Clean DBS Interviews will be held this week, with a view to start 1 week after interview date Pay is weekly, one week in arrears To register your interest, please call the R9 Recruitment Team
Jun 24, 2026
Contractor
My large Social Housing Client are now looking for Gas Service Only Sub-Contractors, covering the MK postcode area (Bedford area mainly). Please note this a high volume contract, 10+ jobs will be given per each day. Engineers will also be paid an additional amount for CO alarms . PRICE PER JOB = 25.00 + 3.00 for CO Alarms Average earnings 1,300 - 1,500 per week As this is a self-employed role the following is required: - ACS Certificate - Own Van - Gas Safe Registration - Public Liability Insurance - Calibration Certificate - Asbestos Awareness - Clean DBS Interviews will be held this week, with a view to start 1 week after interview date Pay is weekly, one week in arrears To register your interest, please call the R9 Recruitment Team
Deburrer / Finisher Chessington, Surrey - Commutable from Kingston, Epsom, Surbiton, Sutton, Croydon and surrounding areas 30,000 - 35,000 ( 18ph)+ Mon - Thu (8-5pm) + Early Finish Fridays (12pm) + Pension + Life Assurance + Bonus + 5 Weeks Holiday + Bank Are you a Deburrer or Finisher with experience in a precision engineering environment, looking to join a stable company offering long-term security, progression, and an excellent work-life balance? On offer is a permanent position within a well-established precision engineering business supplying high-quality components into industries including aerospace, automotive, oil and gas, nuclear, and general engineering. Due to continued growth, they are looking to expand their finishing team at their Chessington facility. You will play a key role in ensuring CNC turned components meet strict quality and customer standards. In this role, you will be responsible for deburring CNC machined parts, working from engineering drawings, and carrying out final finishing operations within a quality-driven environment. The role: Deburring external surfaces and edges of CNC turned components Deburring internal cross-drilling and internal and external threads Using hand tools to meet engineering drawing requirements The person: Experience within a precision engineering or machine shop environment Strong attention to detail and quality standards Knowledge of working with multiple material types Reference Number: BBBH(phone number removed) Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
Jun 24, 2026
Full time
Deburrer / Finisher Chessington, Surrey - Commutable from Kingston, Epsom, Surbiton, Sutton, Croydon and surrounding areas 30,000 - 35,000 ( 18ph)+ Mon - Thu (8-5pm) + Early Finish Fridays (12pm) + Pension + Life Assurance + Bonus + 5 Weeks Holiday + Bank Are you a Deburrer or Finisher with experience in a precision engineering environment, looking to join a stable company offering long-term security, progression, and an excellent work-life balance? On offer is a permanent position within a well-established precision engineering business supplying high-quality components into industries including aerospace, automotive, oil and gas, nuclear, and general engineering. Due to continued growth, they are looking to expand their finishing team at their Chessington facility. You will play a key role in ensuring CNC turned components meet strict quality and customer standards. In this role, you will be responsible for deburring CNC machined parts, working from engineering drawings, and carrying out final finishing operations within a quality-driven environment. The role: Deburring external surfaces and edges of CNC turned components Deburring internal cross-drilling and internal and external threads Using hand tools to meet engineering drawing requirements The person: Experience within a precision engineering or machine shop environment Strong attention to detail and quality standards Knowledge of working with multiple material types Reference Number: BBBH(phone number removed) Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.
Technical Manager Cheshire Competitive Salary & Benefits Permanent, Full Time We are working with an established manufacturer who supply high-quality components into the Aerospace, Oil & Gas, and General Engineering sectors. We are seeking an experienced Technical Manager to join its leadership team. This is an excellent opportunity for a technically driven engineering professional to lead technical operations, support continuous improvement initiatives, and drive New Product Introduction (NPI) activities within a fast-paced manufacturing environment.The Technical Manager, you will lead the technical engineering team and take responsibility for all technical aspects of the manufacturing processes, including Wax, Shell, Foundry, and Finishing operations. You will play a key role in driving process improvements, managing tooling projects, supporting new product development, and ensuring products are manufactured in line with customer specifications and quality requirements. Technical Manager Job Description Lead and manage the Technical Engineering team. Provide technical guidance and support across all departments. Manage technical aspects & operations. Oversee tooling design, procurement, modification, and implementation. Drive New Product Introduction (NPI) activities from concept through to production. Manage tooling projects to ensure timely delivery and successful implementation. Develop and improve manufacturing processes to enhance efficiency and reduce costs. Lead continuous improvement initiatives focused on quality, productivity, and waste reduction. Conduct Root Cause Corrective Action (RCCA) investigations and implement corrective measures. Produce and analyse scrap and rework reports, identifying trends and improvement opportunities. Ensure production processes comply with customer drawings, specifications, and technical requirements. Work collaboratively with Production, Quality, Commercial, and Sales teams to resolve technical issues. Ensure all routings (PFEP) and process documentation are accurate and maintained. Monitor production performance and identify opportunities for improvement. Investigate non-conforming products and support corrective action implementation. Prepare and present monthly performance and technical reports. Promote and maintain compliance with Health & Safety policies and procedures. Coach, mentor, and develop team members to support business objectives. Technical Manager Experience & Qualification HND, HNC, Degree or equivalent qualification in Engineering, Metallurgy, Materials Science, or a related discipline. Previous experience in a Technical Manager, Engineering Manager, Manufacturing Engineer, Process Engineer, or similar leadership role. Strong understanding of manufacturing processes within a technical engineering environment. Experience managing engineering projects and New Product Introduction (NPI) activities. Ability to read and interpret technical drawings, specifications, and customer requirements. Excellent problem-solving and root cause analysis skills. Strong communication and stakeholder management abilities. Proven ability to lead, motivate, and develop teams. Highly organised with the ability to manage multiple priorities and deadlines. Good IT and reporting skills. Knowledge of investment casting processes would be highly advantageous. Benefits Competitive Salary Company Pension Scheme Private Healthcare 25 Days Annual Leave plus Bank Holidays Opportunity to join a well-established and growing manufacturing business Senior leadership position with scope to influence operational and technical strategy
Jun 24, 2026
Full time
Technical Manager Cheshire Competitive Salary & Benefits Permanent, Full Time We are working with an established manufacturer who supply high-quality components into the Aerospace, Oil & Gas, and General Engineering sectors. We are seeking an experienced Technical Manager to join its leadership team. This is an excellent opportunity for a technically driven engineering professional to lead technical operations, support continuous improvement initiatives, and drive New Product Introduction (NPI) activities within a fast-paced manufacturing environment.The Technical Manager, you will lead the technical engineering team and take responsibility for all technical aspects of the manufacturing processes, including Wax, Shell, Foundry, and Finishing operations. You will play a key role in driving process improvements, managing tooling projects, supporting new product development, and ensuring products are manufactured in line with customer specifications and quality requirements. Technical Manager Job Description Lead and manage the Technical Engineering team. Provide technical guidance and support across all departments. Manage technical aspects & operations. Oversee tooling design, procurement, modification, and implementation. Drive New Product Introduction (NPI) activities from concept through to production. Manage tooling projects to ensure timely delivery and successful implementation. Develop and improve manufacturing processes to enhance efficiency and reduce costs. Lead continuous improvement initiatives focused on quality, productivity, and waste reduction. Conduct Root Cause Corrective Action (RCCA) investigations and implement corrective measures. Produce and analyse scrap and rework reports, identifying trends and improvement opportunities. Ensure production processes comply with customer drawings, specifications, and technical requirements. Work collaboratively with Production, Quality, Commercial, and Sales teams to resolve technical issues. Ensure all routings (PFEP) and process documentation are accurate and maintained. Monitor production performance and identify opportunities for improvement. Investigate non-conforming products and support corrective action implementation. Prepare and present monthly performance and technical reports. Promote and maintain compliance with Health & Safety policies and procedures. Coach, mentor, and develop team members to support business objectives. Technical Manager Experience & Qualification HND, HNC, Degree or equivalent qualification in Engineering, Metallurgy, Materials Science, or a related discipline. Previous experience in a Technical Manager, Engineering Manager, Manufacturing Engineer, Process Engineer, or similar leadership role. Strong understanding of manufacturing processes within a technical engineering environment. Experience managing engineering projects and New Product Introduction (NPI) activities. Ability to read and interpret technical drawings, specifications, and customer requirements. Excellent problem-solving and root cause analysis skills. Strong communication and stakeholder management abilities. Proven ability to lead, motivate, and develop teams. Highly organised with the ability to manage multiple priorities and deadlines. Good IT and reporting skills. Knowledge of investment casting processes would be highly advantageous. Benefits Competitive Salary Company Pension Scheme Private Healthcare 25 Days Annual Leave plus Bank Holidays Opportunity to join a well-established and growing manufacturing business Senior leadership position with scope to influence operational and technical strategy
The Sureserve Group of businesses provides market-leading compliance and energy services across the UK, with 4000 employees working from over 20 offices. Sureserve Compliance South, part of the Sureserve Group, delivers heating services within the social housing sector across London & the South East. We support our clients across domestic gas, commercial gas, renewables, and electrical services. We are London's largest, most successful gas contractor, focusing on long-term contracts with our clients to offer our staff job security and progression opportunities. Role • Service and maintain domestic gas appliances and heating systems within social housing properties. • Conduct annual gas safety inspections and issue Gas Safety Certificates in line with regulatory requirements. • Diagnose and repair faults in boilers, heating systems, pipework, and gas appliances. • Ensure all gas work complies with industry regulations, safety standards, and company policies. • Respond to emergency callouts related to gas leaks, appliance failures, or heating outages. • Maintain accurate records of inspections, maintenance, and repairs using company systems. • Communicate clearly with tenants regarding work being carried out and provide guidance on safe appliance use. • Work collaboratively with housing officers, contractors, and maintenance teams to coordinate repairs and servicing schedules. • Identify opportunities for system improvements or energy efficiency upgrades within properties. • Ensure proper use and maintenance of tools, equipment, and personal protective equipment (PPE). The successful candidate will have Valid ACS & other relevant gas qualifications OFTEC Quliaification Full UK Driving Licence (less than 6 points) Experience within Social Housing desirable, but not essential Experience delivering high levels of customer service The ability to work with a diverse customer base What we can offer you We offer a range of benefits designed to support your lifestyle whilst working for Sureserve and outside of work, some of these include: Competitive salary £40k - £45k Contributory Pension scheme Life assurance 28 days annual leave inclusive of bank holidays, rising 1 per year of service to a max of 33 days Enhanced maternity, paternity, adoption leave, and other family friendly policies such as carer's leave, neonatal leave, IVF, and assisted conception leave. In addition, the role offers: Sureserve Benefits Hub, accessing over 1000's retail discounts Virtual GP service, 24/7, 365 days, available for employees and your immediate family Employee assistance programme (EAP), available 24/7. 365 days, for employees and your immediate family Bike2Work scheme Home & Electronics - salary sacrifice purchase scheme Sureserve is an equal opportunities employer, dedicated to nurturing a diverse and inclusive work environment. We are committed to equal employment opportunity regardless of race, colour, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status Reasonable adjustments As part of our commitment to Inclusivity, we offer reasonable adjustments throughout the recruitment process for individuals who may require them. If you feel you need any adjustments, please contact Pre-employment checks Successful applicants will be subject to eligibility checks with a 3rd party, including the right to work in the UK and DBS checks JBRP1_UKTJ
Jun 24, 2026
Full time
The Sureserve Group of businesses provides market-leading compliance and energy services across the UK, with 4000 employees working from over 20 offices. Sureserve Compliance South, part of the Sureserve Group, delivers heating services within the social housing sector across London & the South East. We support our clients across domestic gas, commercial gas, renewables, and electrical services. We are London's largest, most successful gas contractor, focusing on long-term contracts with our clients to offer our staff job security and progression opportunities. Role • Service and maintain domestic gas appliances and heating systems within social housing properties. • Conduct annual gas safety inspections and issue Gas Safety Certificates in line with regulatory requirements. • Diagnose and repair faults in boilers, heating systems, pipework, and gas appliances. • Ensure all gas work complies with industry regulations, safety standards, and company policies. • Respond to emergency callouts related to gas leaks, appliance failures, or heating outages. • Maintain accurate records of inspections, maintenance, and repairs using company systems. • Communicate clearly with tenants regarding work being carried out and provide guidance on safe appliance use. • Work collaboratively with housing officers, contractors, and maintenance teams to coordinate repairs and servicing schedules. • Identify opportunities for system improvements or energy efficiency upgrades within properties. • Ensure proper use and maintenance of tools, equipment, and personal protective equipment (PPE). The successful candidate will have Valid ACS & other relevant gas qualifications OFTEC Quliaification Full UK Driving Licence (less than 6 points) Experience within Social Housing desirable, but not essential Experience delivering high levels of customer service The ability to work with a diverse customer base What we can offer you We offer a range of benefits designed to support your lifestyle whilst working for Sureserve and outside of work, some of these include: Competitive salary £40k - £45k Contributory Pension scheme Life assurance 28 days annual leave inclusive of bank holidays, rising 1 per year of service to a max of 33 days Enhanced maternity, paternity, adoption leave, and other family friendly policies such as carer's leave, neonatal leave, IVF, and assisted conception leave. In addition, the role offers: Sureserve Benefits Hub, accessing over 1000's retail discounts Virtual GP service, 24/7, 365 days, available for employees and your immediate family Employee assistance programme (EAP), available 24/7. 365 days, for employees and your immediate family Bike2Work scheme Home & Electronics - salary sacrifice purchase scheme Sureserve is an equal opportunities employer, dedicated to nurturing a diverse and inclusive work environment. We are committed to equal employment opportunity regardless of race, colour, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status Reasonable adjustments As part of our commitment to Inclusivity, we offer reasonable adjustments throughout the recruitment process for individuals who may require them. If you feel you need any adjustments, please contact Pre-employment checks Successful applicants will be subject to eligibility checks with a 3rd party, including the right to work in the UK and DBS checks JBRP1_UKTJ
Are you an experienced Fire Service Engineer looking for a new role? Do you have experience with fire alarms, detection, suppression and aspirating systems? If so, this Fire Service Engineer position is perfect for you! This Fire Service Engineer role is working for a company with a regional office in Leeds , however the role is field based , covering the North . The role is Monday to Friday, paying a basic salary of up to 38,000 depending on experience . With Travel and Overtime, the OTE is realistically around the 45,000 mark . The successful candidate will be responsible for servicing, maintaining and repairing a range of fire alarm, detection, suppression and aspirating systems across commercial customer sites. The role will involve carrying out planned preventative maintenance, fault finding, remedial works and system testing to ensure all equipment remains fully compliant and operational. You will work independently across a variety of environments, providing a professional and customer focused service while completing detailed service documentation and communicating effectively with clients on site. The position will also involve responding to urgent fault calls, supporting system reliability and representing the business with a proactive and solutions focused approach. You will need: At least 3 years experience in a similar role Previous experience servicing addressable fire alarm systems To be able to perform installations ECS card and FIA qualifications (or similar) Experience with gas suppression, CCTV, Access Control or Aspirating systems is advantageous If you are interested in this role and think you have the skills and experience this company are looking for then APPLY NOW. Alternatively, please call Tom Jones at Kingdom People on (phone number removed) . Kingdom People is acting within the capacity of a Recruitment Agency for their client
Jun 24, 2026
Full time
Are you an experienced Fire Service Engineer looking for a new role? Do you have experience with fire alarms, detection, suppression and aspirating systems? If so, this Fire Service Engineer position is perfect for you! This Fire Service Engineer role is working for a company with a regional office in Leeds , however the role is field based , covering the North . The role is Monday to Friday, paying a basic salary of up to 38,000 depending on experience . With Travel and Overtime, the OTE is realistically around the 45,000 mark . The successful candidate will be responsible for servicing, maintaining and repairing a range of fire alarm, detection, suppression and aspirating systems across commercial customer sites. The role will involve carrying out planned preventative maintenance, fault finding, remedial works and system testing to ensure all equipment remains fully compliant and operational. You will work independently across a variety of environments, providing a professional and customer focused service while completing detailed service documentation and communicating effectively with clients on site. The position will also involve responding to urgent fault calls, supporting system reliability and representing the business with a proactive and solutions focused approach. You will need: At least 3 years experience in a similar role Previous experience servicing addressable fire alarm systems To be able to perform installations ECS card and FIA qualifications (or similar) Experience with gas suppression, CCTV, Access Control or Aspirating systems is advantageous If you are interested in this role and think you have the skills and experience this company are looking for then APPLY NOW. Alternatively, please call Tom Jones at Kingdom People on (phone number removed) . Kingdom People is acting within the capacity of a Recruitment Agency for their client
Quantum is now, and it's built here. Oxford Ionics, now part of IonQ, is pioneering the next generation of quantum computing. Using our world-leading trapped-ion technology, were building the most powerful, accurate and reliable quantum systems to tackle problems that todays supercomputers cannot solve. Joining Oxford Ionics means becoming part of a global IonQ team that is transforming the future of quantum technology - faster, at scale, and with real world impact. What to expect: We are seeking a Senior Facilities Engineer to support the safe, compliant, and reliable operation of critical facilities infrastructure across laboratory, cleanroom, and technical manufacturing environments. This is a hands-on, front-line role responsible for executing day-to-day facilities operations, owning routine compliance tasks, and maintaining control of site activities. The role is expected to take direct ownership of facilities issues, ensuring they are managed through to resolution. The position works closely with the Head of Facilities and is critical in ensuring that compliance, contractor control, and system reliability do not rely on a single point of failure. What youll be responsible for: The role involves carrying out planned preventative and reactive maintenance across HVAC, mechanical, electrical, and plumbing systems to support the reliable operation of critical utilities, including Process Chilled Water (PCW), Chilled Water (CHW), HVAC systems for controlled environments, and basic gas and utility distribution systems. Responsibilities include acting as a first responder to facilities faults and system issues, taking ownership through to resolution by performing fault finding, diagnostics, and escalation where required. The position also requires completion of routine compliance activities while ensuring effective system performance, reliability, and safety across site operations. A key part of the role is day-to-day compliance ownership, including conducting fire alarm and life safety testing, Legionella control checks (L8), safety inspections, and basic statutory checks. Accurate, audit-ready records must be maintained at all times, with responsibility for supporting audits and ensuring documentation remains complete, well-structured, and easily accessible. The role also involves proactively identifying and escalating compliance risks where necessary. You will manage and control contractor activities on site, ensuring RAMS are reviewed, understood, and followed correctly, while Permit-to-Work systems are applied appropriately. All contractor works must be completed safely and to the required standards, with unsafe practices challenged immediately and work stopped if required. Responsibility also includes ensuring all associated documentation, certification, and completion records are captured accurately. The position supports facilities operations across laboratory, ISO cleanroom, and technical manufacturing environments, helping maintain controlled conditions such as temperature, airflow, and cleanliness systems. You will assist with the installation, relocation, and setup of equipment and infrastructure, coordinating key interfaces including power, cooling, and other associated services required for new equipment integration. In addition, you will raise, track, and close work orders using the CMMS system while maintaining accurate asset registers and maintenance records. The role includes supporting calibration tracking activities and contributing to the development and continuous improvement of SOPs and maintenance procedures. You will also respond to facilities incidents such as power loss, leaks, and system failures, taking ownership through to resolution or escalation as needed, while supporting emergency response procedures, business continuity activities, and participating in an on-call rota where required. Additional responsibilities include: Carrying out minor repairs and general fabric maintenance across the site. Supporting goods-in, logistics activities, and equipment movement when required. Maintaining stock levels of critical spares and consumables. Supporting flexible day-to-day facilities and site operations to ensure continuity and efficiency. Requirements To be successful in this role, you will need an NVQ Level 3, City & Guilds qualification, HNC, or equivalent in Mechanical, Electrical, or Building Services, alongside 35+ years of experience within high-tech, laboratory, cleanroom, semiconductor, manufacturing, or similarly regulated environments. We are looking for someone with a strong working knowledge of MEP systems and building services, experience using CMMS systems, and a solid understanding of UK compliance frameworks, including L8, fire safety, and health & safety regulations. You will need to be confident interpreting technical drawings, SOPs, and specifications, while supporting critical laboratory and manufacturing operations where uptime, reliability, and compliance are essential. You'd be a great fit with: Experience supporting cleanroom (ISO 58) environments Experience with PCW / CHW systems or critical cooling infrastructure Familiarity with BMS platforms (e.g. Trend, Tridium Niagara) IOSH qualification or equivalent Experience working in audit-driven environments (GLP / GMP) Additional experience that would be beneficial includes working within laboratory and cleanroom environments while following gowning and contamination control procedures, participating in on-call support and occasional out-of-hours or weekend working, and demonstrating a strong safety mindset with the confidence to challenge unsafe acts and ensure compliance across critical facilities infrastructure and operations. Benefits Be part of a team thats shaping the future of quantum. We offer more than just a role, youll join a world class community of scientists, engineers and innovators working to unlock the full potential of quantum computing. We offer a range of benefits, including opportunities to further your career alongside industry leaders, a competitive salary with IonQ stock options, an annual performance bonus, generous annual leave, flexible hybrid working, private medical and dental insurance for you and your family, and much more. Join us and be part of the future of quantum computing. Were proud to be an equal opportunity employer and welcome applicants from all backgrounds. JBRP1_UKTJ
Jun 24, 2026
Full time
Quantum is now, and it's built here. Oxford Ionics, now part of IonQ, is pioneering the next generation of quantum computing. Using our world-leading trapped-ion technology, were building the most powerful, accurate and reliable quantum systems to tackle problems that todays supercomputers cannot solve. Joining Oxford Ionics means becoming part of a global IonQ team that is transforming the future of quantum technology - faster, at scale, and with real world impact. What to expect: We are seeking a Senior Facilities Engineer to support the safe, compliant, and reliable operation of critical facilities infrastructure across laboratory, cleanroom, and technical manufacturing environments. This is a hands-on, front-line role responsible for executing day-to-day facilities operations, owning routine compliance tasks, and maintaining control of site activities. The role is expected to take direct ownership of facilities issues, ensuring they are managed through to resolution. The position works closely with the Head of Facilities and is critical in ensuring that compliance, contractor control, and system reliability do not rely on a single point of failure. What youll be responsible for: The role involves carrying out planned preventative and reactive maintenance across HVAC, mechanical, electrical, and plumbing systems to support the reliable operation of critical utilities, including Process Chilled Water (PCW), Chilled Water (CHW), HVAC systems for controlled environments, and basic gas and utility distribution systems. Responsibilities include acting as a first responder to facilities faults and system issues, taking ownership through to resolution by performing fault finding, diagnostics, and escalation where required. The position also requires completion of routine compliance activities while ensuring effective system performance, reliability, and safety across site operations. A key part of the role is day-to-day compliance ownership, including conducting fire alarm and life safety testing, Legionella control checks (L8), safety inspections, and basic statutory checks. Accurate, audit-ready records must be maintained at all times, with responsibility for supporting audits and ensuring documentation remains complete, well-structured, and easily accessible. The role also involves proactively identifying and escalating compliance risks where necessary. You will manage and control contractor activities on site, ensuring RAMS are reviewed, understood, and followed correctly, while Permit-to-Work systems are applied appropriately. All contractor works must be completed safely and to the required standards, with unsafe practices challenged immediately and work stopped if required. Responsibility also includes ensuring all associated documentation, certification, and completion records are captured accurately. The position supports facilities operations across laboratory, ISO cleanroom, and technical manufacturing environments, helping maintain controlled conditions such as temperature, airflow, and cleanliness systems. You will assist with the installation, relocation, and setup of equipment and infrastructure, coordinating key interfaces including power, cooling, and other associated services required for new equipment integration. In addition, you will raise, track, and close work orders using the CMMS system while maintaining accurate asset registers and maintenance records. The role includes supporting calibration tracking activities and contributing to the development and continuous improvement of SOPs and maintenance procedures. You will also respond to facilities incidents such as power loss, leaks, and system failures, taking ownership through to resolution or escalation as needed, while supporting emergency response procedures, business continuity activities, and participating in an on-call rota where required. Additional responsibilities include: Carrying out minor repairs and general fabric maintenance across the site. Supporting goods-in, logistics activities, and equipment movement when required. Maintaining stock levels of critical spares and consumables. Supporting flexible day-to-day facilities and site operations to ensure continuity and efficiency. Requirements To be successful in this role, you will need an NVQ Level 3, City & Guilds qualification, HNC, or equivalent in Mechanical, Electrical, or Building Services, alongside 35+ years of experience within high-tech, laboratory, cleanroom, semiconductor, manufacturing, or similarly regulated environments. We are looking for someone with a strong working knowledge of MEP systems and building services, experience using CMMS systems, and a solid understanding of UK compliance frameworks, including L8, fire safety, and health & safety regulations. You will need to be confident interpreting technical drawings, SOPs, and specifications, while supporting critical laboratory and manufacturing operations where uptime, reliability, and compliance are essential. You'd be a great fit with: Experience supporting cleanroom (ISO 58) environments Experience with PCW / CHW systems or critical cooling infrastructure Familiarity with BMS platforms (e.g. Trend, Tridium Niagara) IOSH qualification or equivalent Experience working in audit-driven environments (GLP / GMP) Additional experience that would be beneficial includes working within laboratory and cleanroom environments while following gowning and contamination control procedures, participating in on-call support and occasional out-of-hours or weekend working, and demonstrating a strong safety mindset with the confidence to challenge unsafe acts and ensure compliance across critical facilities infrastructure and operations. Benefits Be part of a team thats shaping the future of quantum. We offer more than just a role, youll join a world class community of scientists, engineers and innovators working to unlock the full potential of quantum computing. We offer a range of benefits, including opportunities to further your career alongside industry leaders, a competitive salary with IonQ stock options, an annual performance bonus, generous annual leave, flexible hybrid working, private medical and dental insurance for you and your family, and much more. Join us and be part of the future of quantum computing. Were proud to be an equal opportunity employer and welcome applicants from all backgrounds. JBRP1_UKTJ
AC Improver - Bedfordshire - 35K We are a well-established, family-run plumbing and heating company, now in our fourth year of trading. With a dedicated team of six full-time staff, we proudly serve clients across Bedfordshire, Hertfordshire, and Cambridgeshire. Our projects span high-end residential properties (valued £1m ), schools, and commercial plant rooms, where quality workmanship and reliability are at the heart of everything we do. The Role We're looking for an AC Improver to join our growing team. The role will involve a mix of installation, service, and maintenance work on air conditioning equipment across a range of sites. You'll be responsible to work alongside a fully fledged AC engineer assist them with their duties and getting hands on knowledge in air conditioning sector. Key Responsibilities Assisting with the installation, servicing, and maintenance of air conditioning systems Supporting the Senior Engineer on-site across multiple project locations Learning to diagnose faults and carry out basic repairs and maintenance Assisting with system testing and commissioning Handling tools, materials, and equipment safely and efficiently Maintaining a clean and safe working environment on-site Ensuring all work is carried out in line with company standards and health & safety regulations Delivering a professional, customer-focused approach always What We're Looking For Qualified in AC with FGAS Cat 1 certificate 1 - 5 years' experience. Ability to work well in a team. Good attention to detail A full UK driving licence What We Offer Salary: 28 - 35K (depending on experience) No call out rota 20 days holiday 8 bank holidays Standard pension scheme 40-hour working week Overtime opportunities
Jun 24, 2026
Full time
AC Improver - Bedfordshire - 35K We are a well-established, family-run plumbing and heating company, now in our fourth year of trading. With a dedicated team of six full-time staff, we proudly serve clients across Bedfordshire, Hertfordshire, and Cambridgeshire. Our projects span high-end residential properties (valued £1m ), schools, and commercial plant rooms, where quality workmanship and reliability are at the heart of everything we do. The Role We're looking for an AC Improver to join our growing team. The role will involve a mix of installation, service, and maintenance work on air conditioning equipment across a range of sites. You'll be responsible to work alongside a fully fledged AC engineer assist them with their duties and getting hands on knowledge in air conditioning sector. Key Responsibilities Assisting with the installation, servicing, and maintenance of air conditioning systems Supporting the Senior Engineer on-site across multiple project locations Learning to diagnose faults and carry out basic repairs and maintenance Assisting with system testing and commissioning Handling tools, materials, and equipment safely and efficiently Maintaining a clean and safe working environment on-site Ensuring all work is carried out in line with company standards and health & safety regulations Delivering a professional, customer-focused approach always What We're Looking For Qualified in AC with FGAS Cat 1 certificate 1 - 5 years' experience. Ability to work well in a team. Good attention to detail A full UK driving licence What We Offer Salary: 28 - 35K (depending on experience) No call out rota 20 days holiday 8 bank holidays Standard pension scheme 40-hour working week Overtime opportunities
Gas Engineer Service Only Engineer Stirling What We Offer £33,230.46 base salary Annual Pay Review - Profit Sharing Scheme Full-Time, Permanent Contract Annual Pay Review & Profit Share Scheme Fully Costed Van & Fuel Card (EV options with free home install) Renewables Upskill Potential Local ByBox Allocation less travel, more earning potential Exceptional Benefits Employee Energy Allowance & Discount on HIVE Products Company-Funded Healthcare + 24/7 Online GP Service Company-matched Pension Scheme 25 Days Holiday + Bank Holidays Full Sick Pay after successful probation Life Assurance, Income Protection & Accident Insurance Exclusive Retail Discounts & Financial Education Support You will be carrying out services and maintenance in domestic social housing properties, aiming for first-time fixes with the support of our 24/7 network. Key Requirements (Essential) ACS qualified CCN1, CENWAT, HTR1 & CKR1 Minimum 2 years post-qualification experience Full UK driving licence (maximum 6 points) Right to Work in the UK What were looking for Strong knowledge of procedures and safety standards aligned to PH Jones and British Gas Ability to diagnose and repair faults effectively, aiming for first-time fixes Commitment to delivering excellent customer service in occupied homes JBRP1_UKTJ
Jun 24, 2026
Full time
Gas Engineer Service Only Engineer Stirling What We Offer £33,230.46 base salary Annual Pay Review - Profit Sharing Scheme Full-Time, Permanent Contract Annual Pay Review & Profit Share Scheme Fully Costed Van & Fuel Card (EV options with free home install) Renewables Upskill Potential Local ByBox Allocation less travel, more earning potential Exceptional Benefits Employee Energy Allowance & Discount on HIVE Products Company-Funded Healthcare + 24/7 Online GP Service Company-matched Pension Scheme 25 Days Holiday + Bank Holidays Full Sick Pay after successful probation Life Assurance, Income Protection & Accident Insurance Exclusive Retail Discounts & Financial Education Support You will be carrying out services and maintenance in domestic social housing properties, aiming for first-time fixes with the support of our 24/7 network. Key Requirements (Essential) ACS qualified CCN1, CENWAT, HTR1 & CKR1 Minimum 2 years post-qualification experience Full UK driving licence (maximum 6 points) Right to Work in the UK What were looking for Strong knowledge of procedures and safety standards aligned to PH Jones and British Gas Ability to diagnose and repair faults effectively, aiming for first-time fixes Commitment to delivering excellent customer service in occupied homes JBRP1_UKTJ
Key Responsibilities: Service, maintenance and repair of commercial catering equipment Fault Finding on both electrical and gas commercial catering equipment Meeting clients - Customer facing position Essential Qualifications / Experience: COMCAT 1, 3, 5 LPG (Would be an advantage) Benefits 40 Hour working week OT Available at Time 1/2 & Double Time 24 Days Hols + Bank Company Van & Tools Top up training when required JBRP1_UKTJ
Jun 24, 2026
Full time
Key Responsibilities: Service, maintenance and repair of commercial catering equipment Fault Finding on both electrical and gas commercial catering equipment Meeting clients - Customer facing position Essential Qualifications / Experience: COMCAT 1, 3, 5 LPG (Would be an advantage) Benefits 40 Hour working week OT Available at Time 1/2 & Double Time 24 Days Hols + Bank Company Van & Tools Top up training when required JBRP1_UKTJ
