GA Drilling is developing next-generation drilling technologies to unlock geothermal energy at depths and in conditions that conventional drilling cannot reach economically. Our mission is to make geothermal a scalable, baseload source of clean power by enabling reliable, efficient drilling in hard, hot rock. With engineering teams in the USA, Brazil, the UK, and across Europe, we are progressing rapidly toward commercial deployment of our technologies. We are seeking a proactive mechanical technician to perform mechanical assembly, testing, and maintenance for downhole drilling systems. The ideal candidate will be equally comfortable working with established processes and procedures, or with helping to develop and refine new ones. You will be based at our UK Tewkesbury Product Center. The opportunity for you You will be a core member of the operations team at our UK Product Centre, working closely with Engineering, Manufacturing, Supply Chain, and Quality & Compliance. Your work will ensure that drilling tools are produced, deployed, and maintained. You will have the opportunity to positively impact technology and processes as we move from prototype builds to commercial operations.? You will own Safety and Compliance Adhere to all health, safety, and environmental (HSE) regulations and quality procedures to ensure safe work practices. Support a positive and proactive HSE culture. Help maintain a safe, organized, and tidy workshop environment (5S, housekeeping, waste segregation). Assembly and Maintenance Assemble, disassemble, inspect, and perform maintenance on drilling tools and associated equipment according to technical specifications and procedures. Read and interpret technical drawings, schematics, blueprints, and engineering instructions to facilitate assembly and repair processes. Conduct functional tests, performance evaluations, and calibrations on equipment to ensure compliance with quality standards and specifications. Maintain accurate and detailed service records, calibration logs, and repair documentation. Generate reports on work performed and equipment status. Assist with managing the inventory of components, parts, and supplies. Troubleshooting and Repair Diagnose and repair equipment failures down to component level. Assist with failure reporting. Work with Engineering, Manufacturing and Quality & Compliance to escalate / solve technical or quality issues, and support investigations. Continuous Improvement and Engineering Support Assist in the development and refinement of manufacturing, testing, and maintenance procedures and equipment. Provide support to engineering teams for new designs and tests. Provide feedback to engineering on design improvement opportunities. Travel to and assist at field locations if required. Collaboration Engage with other technicians, engineers, field representatives, and functions to resolve issues, support failure analysis, and ensure seamless equipment deployment. ?What we expect from you: Experience & technical skills Experience with the assembly, maintenance, and testing of complex mechanical and electromechanical systems. Experience with drilling tool assembly or maintenance would be advantageous. Experience with equipment troubleshooting, and report generation. Overhead crane certification / training. Forklift certification. Break Out Machine familiarity and training would be advantageous. Ability to use a manual lathe / mill would be advantageous. Good computer literacy e.g. Microsoft Office, Maintenance Management Systems (CMMS). Ability to read, understand, and interpret technical manuals, schematics, and diagrams. Qualifications: HND / BTEC or equivalent relevant experience. Working style & collaboration High attention to detail, accuracy, and documentation discipline. Structured and reliable, able to follow defined procedures while highlighting gaps or issues when needed. Comfortable working with established processes and procedures, or with helping to develop and refine new ones Strong problem-solving, analytical, and critical thinking skills. Excellent communication skills, both written and verbal, for effective collaboration and reporting. Demonstrated ability to work independently or as part of a team Ability to provide and receive constructive feedback, contributing to improved product performance and reliability. What we offer: Opportunity to contribute directly to making ultra-deep geothermal energy a commercial reality. Chance to help establish and shape a new UK Product Centre from its early stages. Work with an experienced, international team of engineers and operations professionals. Competitive compensation and benefits in line with industry and local market.
Jan 08, 2026
Full time
GA Drilling is developing next-generation drilling technologies to unlock geothermal energy at depths and in conditions that conventional drilling cannot reach economically. Our mission is to make geothermal a scalable, baseload source of clean power by enabling reliable, efficient drilling in hard, hot rock. With engineering teams in the USA, Brazil, the UK, and across Europe, we are progressing rapidly toward commercial deployment of our technologies. We are seeking a proactive mechanical technician to perform mechanical assembly, testing, and maintenance for downhole drilling systems. The ideal candidate will be equally comfortable working with established processes and procedures, or with helping to develop and refine new ones. You will be based at our UK Tewkesbury Product Center. The opportunity for you You will be a core member of the operations team at our UK Product Centre, working closely with Engineering, Manufacturing, Supply Chain, and Quality & Compliance. Your work will ensure that drilling tools are produced, deployed, and maintained. You will have the opportunity to positively impact technology and processes as we move from prototype builds to commercial operations.? You will own Safety and Compliance Adhere to all health, safety, and environmental (HSE) regulations and quality procedures to ensure safe work practices. Support a positive and proactive HSE culture. Help maintain a safe, organized, and tidy workshop environment (5S, housekeeping, waste segregation). Assembly and Maintenance Assemble, disassemble, inspect, and perform maintenance on drilling tools and associated equipment according to technical specifications and procedures. Read and interpret technical drawings, schematics, blueprints, and engineering instructions to facilitate assembly and repair processes. Conduct functional tests, performance evaluations, and calibrations on equipment to ensure compliance with quality standards and specifications. Maintain accurate and detailed service records, calibration logs, and repair documentation. Generate reports on work performed and equipment status. Assist with managing the inventory of components, parts, and supplies. Troubleshooting and Repair Diagnose and repair equipment failures down to component level. Assist with failure reporting. Work with Engineering, Manufacturing and Quality & Compliance to escalate / solve technical or quality issues, and support investigations. Continuous Improvement and Engineering Support Assist in the development and refinement of manufacturing, testing, and maintenance procedures and equipment. Provide support to engineering teams for new designs and tests. Provide feedback to engineering on design improvement opportunities. Travel to and assist at field locations if required. Collaboration Engage with other technicians, engineers, field representatives, and functions to resolve issues, support failure analysis, and ensure seamless equipment deployment. ?What we expect from you: Experience & technical skills Experience with the assembly, maintenance, and testing of complex mechanical and electromechanical systems. Experience with drilling tool assembly or maintenance would be advantageous. Experience with equipment troubleshooting, and report generation. Overhead crane certification / training. Forklift certification. Break Out Machine familiarity and training would be advantageous. Ability to use a manual lathe / mill would be advantageous. Good computer literacy e.g. Microsoft Office, Maintenance Management Systems (CMMS). Ability to read, understand, and interpret technical manuals, schematics, and diagrams. Qualifications: HND / BTEC or equivalent relevant experience. Working style & collaboration High attention to detail, accuracy, and documentation discipline. Structured and reliable, able to follow defined procedures while highlighting gaps or issues when needed. Comfortable working with established processes and procedures, or with helping to develop and refine new ones Strong problem-solving, analytical, and critical thinking skills. Excellent communication skills, both written and verbal, for effective collaboration and reporting. Demonstrated ability to work independently or as part of a team Ability to provide and receive constructive feedback, contributing to improved product performance and reliability. What we offer: Opportunity to contribute directly to making ultra-deep geothermal energy a commercial reality. Chance to help establish and shape a new UK Product Centre from its early stages. Work with an experienced, international team of engineers and operations professionals. Competitive compensation and benefits in line with industry and local market.
Workshop Engineer - Generators Bristol 35,000 - 40,000 + Training + Progression + Benefits Are you looking for a Workshop based role offering Professional training, Progression and day to day variety? The company are a market leading industrial equipment rental company and operate a nationwide operation renting out equipment to construction, leisure, manufacturing and industrial customers. The role involves servicing and repairing a range of diesel generators from multiple brands as part of a team within the well kitted out modern depot workshops. The generators range from portable up to large lorry mounted generators used at festivals, construction sites and temporary industrial locations. Here is a great chance to join a market leading company, who are expanding their operation and can offer regular overtime and manufacturers training courses. The Role: Workshop Engineer Repair and Service of Diesel Generators 40 hour weeks but overtime can range from time and a half to double time dependent on days worked - Typical based hours on a rota would be 4 days in the week and 1 on the weekend Candidate Requirements: Diesel Generator or Large Diesel Engine experience A relevant qualification in any of Mechanical, Electrical, Plant, Diesel or similar Consultant: Sebastian Petitti Elix Sourcing Solutions is a specialist recruiter for Engineering, Manufacturing, Tech, Energy and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Generator Engineer, workshop engineer, depot engineer, mechanical engineer, diesel, diesel fitter, diesel engines, hgv, electrical, perkins, cummins, fg Wilson, hnd, nvq, hnc, forklift, kva, generators, power generation, Bristol, yate, bath. avon
Jan 08, 2026
Full time
Workshop Engineer - Generators Bristol 35,000 - 40,000 + Training + Progression + Benefits Are you looking for a Workshop based role offering Professional training, Progression and day to day variety? The company are a market leading industrial equipment rental company and operate a nationwide operation renting out equipment to construction, leisure, manufacturing and industrial customers. The role involves servicing and repairing a range of diesel generators from multiple brands as part of a team within the well kitted out modern depot workshops. The generators range from portable up to large lorry mounted generators used at festivals, construction sites and temporary industrial locations. Here is a great chance to join a market leading company, who are expanding their operation and can offer regular overtime and manufacturers training courses. The Role: Workshop Engineer Repair and Service of Diesel Generators 40 hour weeks but overtime can range from time and a half to double time dependent on days worked - Typical based hours on a rota would be 4 days in the week and 1 on the weekend Candidate Requirements: Diesel Generator or Large Diesel Engine experience A relevant qualification in any of Mechanical, Electrical, Plant, Diesel or similar Consultant: Sebastian Petitti Elix Sourcing Solutions is a specialist recruiter for Engineering, Manufacturing, Tech, Energy and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. Generator Engineer, workshop engineer, depot engineer, mechanical engineer, diesel, diesel fitter, diesel engines, hgv, electrical, perkins, cummins, fg Wilson, hnd, nvq, hnc, forklift, kva, generators, power generation, Bristol, yate, bath. avon
Get Staffed Online Recruitment Limited
Woking, Surrey
Stores Operative Location: Woking, Surrey GU21 Hours: Monday Thursday from 8 30; Friday from 8 30 Job Purpose Our client is a specialist pump distributor serving the chemical, hygienic, and manufacturing industries in the United Kingdom and Ireland. The Stores Operative role is an integral part of the workshop team and plays a significant role in delivering their products to customers. The key responsibilities of the role are to assist with general workshop duties, as listed below, to help the company achieve on-time delivery and provide exceptional customer service. Job Description: Goods inward checking. Order picking and preparation. Stores control. Packing and despatch. Stock checking. Non-conformance recording. General workshop and office maintenance. Following Additional Training: Forklift operation. Pump assembly and testing. Assembly of production order pump sets. Investigation and repair of returned goods. Pump repairs. Principal Accountabilities: Assisting with goods inwards and despatch. Picking and storing pumps and accessories. Stock and inventory control. General workshop tasks. Pump assembly. Pressure testing of pumps. Inspection of pumps. N.B. This list is not exhaustive; the job holder may be required to carry out additional reasonable tasks within their level of skill and ability. Skills, Knowledge, and Experience: Qualifications: GCSEs (or equivalent) Grade C or above in Mathematics and English (desirable). Skills and Knowledge: IT literate (essential); General understanding of engineering processes (desirable). Experience: Experience in a warehouse or similar environment, basic engineering skills, and familiarity with using tools and equipment. Character: A desire to provide exceptional customer service, eagerness to assist in the continuous improvement of the organisation, ability to promote, embrace, and manage change, contribution to a positive working environment, and being an effective communicator (all essential). Summary The role involves assisting with day-to-day tasks, including building pumps, booking in parts, carrying out repairs, and despatching goods. Initial in-house training will be provided, with further training opportunities available with their principal pump suppliers. Click apply and submit an up-to-date CV.
Jan 03, 2026
Full time
Stores Operative Location: Woking, Surrey GU21 Hours: Monday Thursday from 8 30; Friday from 8 30 Job Purpose Our client is a specialist pump distributor serving the chemical, hygienic, and manufacturing industries in the United Kingdom and Ireland. The Stores Operative role is an integral part of the workshop team and plays a significant role in delivering their products to customers. The key responsibilities of the role are to assist with general workshop duties, as listed below, to help the company achieve on-time delivery and provide exceptional customer service. Job Description: Goods inward checking. Order picking and preparation. Stores control. Packing and despatch. Stock checking. Non-conformance recording. General workshop and office maintenance. Following Additional Training: Forklift operation. Pump assembly and testing. Assembly of production order pump sets. Investigation and repair of returned goods. Pump repairs. Principal Accountabilities: Assisting with goods inwards and despatch. Picking and storing pumps and accessories. Stock and inventory control. General workshop tasks. Pump assembly. Pressure testing of pumps. Inspection of pumps. N.B. This list is not exhaustive; the job holder may be required to carry out additional reasonable tasks within their level of skill and ability. Skills, Knowledge, and Experience: Qualifications: GCSEs (or equivalent) Grade C or above in Mathematics and English (desirable). Skills and Knowledge: IT literate (essential); General understanding of engineering processes (desirable). Experience: Experience in a warehouse or similar environment, basic engineering skills, and familiarity with using tools and equipment. Character: A desire to provide exceptional customer service, eagerness to assist in the continuous improvement of the organisation, ability to promote, embrace, and manage change, contribution to a positive working environment, and being an effective communicator (all essential). Summary The role involves assisting with day-to-day tasks, including building pumps, booking in parts, carrying out repairs, and despatching goods. Initial in-house training will be provided, with further training opportunities available with their principal pump suppliers. Click apply and submit an up-to-date CV.
Workshop Operative Stoke-on-Trent Location: Fenton, Stoke-on-Trent (ST4) Working Hours: Monday to Friday, 7:30am 5:00pm Salary: £34,(Apply online only) £37,(Apply online only) per annum, dependent on experience Start Date: January (Interviewing immediately) About Us Conquip Engineering Group is a leading innovator within the construction and engineering sectors, continually pushing boundaries through cutting-edge design and robust manufacturing solutions. We pride ourselves on being at the forefront of engineering excellence, driven by a passion for innovation and continuous improvement. Main Purpose of the Role To maintain, service, and repair Conquip OEM equipment efficiently and effectively, ensuring the smooth operation of our manufacturing processes. Key Responsibilities Carry out repairs, servicing, and set-up primarily on Conquip OEM equipment, which mainly comprises non-mechanical plant and machinery; some welding work will be required. Apply spray painting to equipment as necessary. Complete basic computer tasks to finalise certification documentation accurately. Organise daily work in accordance with instructions from the line manager. Operate counterbalance forklifts and overhead cranes safely and efficiently. Conduct thorough inspections of all lifting equipment on site, ensuring strict compliance with LOLER regulations and signing off equipment on behalf of Conquip. Maintain a professional and courteous manner when liaising with a diverse range of personnel on site. Demonstrate flexibility regarding working hours, as required by the nature of the construction industry. Undertake any additional training necessary to fulfil the role effectively and remain up to date with industry standards. Essential Skills Strong teamwork and collaboration skills. Good planning and organisational abilities. MIG Welding Experience LOLER experience Key Personal Attributes Ability to work efficiently under pressure. Accuracy and meticulous attention to detail. Clear and effective communication skills. A proactive, problem-solving attitude, thriving in a fast-paced, high-pressure environment. A positive outlook with a commitment to performing at your highest level. Alignment with and embodiment of Conquip s five core values. For immediate consideration, please apply directly to this role or contact our Head of Recruitment for an informal discussion regarding this key vacancy. Team Conquip
Jan 01, 2026
Full time
Workshop Operative Stoke-on-Trent Location: Fenton, Stoke-on-Trent (ST4) Working Hours: Monday to Friday, 7:30am 5:00pm Salary: £34,(Apply online only) £37,(Apply online only) per annum, dependent on experience Start Date: January (Interviewing immediately) About Us Conquip Engineering Group is a leading innovator within the construction and engineering sectors, continually pushing boundaries through cutting-edge design and robust manufacturing solutions. We pride ourselves on being at the forefront of engineering excellence, driven by a passion for innovation and continuous improvement. Main Purpose of the Role To maintain, service, and repair Conquip OEM equipment efficiently and effectively, ensuring the smooth operation of our manufacturing processes. Key Responsibilities Carry out repairs, servicing, and set-up primarily on Conquip OEM equipment, which mainly comprises non-mechanical plant and machinery; some welding work will be required. Apply spray painting to equipment as necessary. Complete basic computer tasks to finalise certification documentation accurately. Organise daily work in accordance with instructions from the line manager. Operate counterbalance forklifts and overhead cranes safely and efficiently. Conduct thorough inspections of all lifting equipment on site, ensuring strict compliance with LOLER regulations and signing off equipment on behalf of Conquip. Maintain a professional and courteous manner when liaising with a diverse range of personnel on site. Demonstrate flexibility regarding working hours, as required by the nature of the construction industry. Undertake any additional training necessary to fulfil the role effectively and remain up to date with industry standards. Essential Skills Strong teamwork and collaboration skills. Good planning and organisational abilities. MIG Welding Experience LOLER experience Key Personal Attributes Ability to work efficiently under pressure. Accuracy and meticulous attention to detail. Clear and effective communication skills. A proactive, problem-solving attitude, thriving in a fast-paced, high-pressure environment. A positive outlook with a commitment to performing at your highest level. Alignment with and embodiment of Conquip s five core values. For immediate consideration, please apply directly to this role or contact our Head of Recruitment for an informal discussion regarding this key vacancy. Team Conquip
Position: Yard Operative Hook, Hampshire Location : Hook, Hampshire Working Hours : Monday to Friday from 10am - 8pm (Alternate shifts could be discussed) Salary : Up to £32,(Apply online only) per annum Start Date : As soon as possible Are you a motivated and experienced Yard Operative looking for a new challenge in a fast-paced manufacturing hub? Do you have a 'can-do' attitude and a resourceful approach to your work? If so, this is the perfect opportunity for you to further develop your professional skill set within the engineering, construction & manufacturing industries. This role requires a valid driving licence, access to your own transport, and previous experience using a forklift. Main Purpose of the Role Position Summary: As a Yard Operative, you will be responsible for maintaining and servicing equipment, as well as completing tasks within the target time frame. Your role is crucial in ensuring the efficient and effective operation of our construction hub. Key Responsibilities: Move equipment to and from the washing area. Prepare equipment for washing by removing necessary components. Jet wash equipment to a suitable standard and relocate to the workshop. Adhere to all health and safety standards at all times. Perform basic computer work to complete tasks. Pick orders and load/unload vehicles. Manage the yard and ensure items are in the correct locations. Be flexible with working hours, including early starts as required by the construction industry. Maintain stock control by ensuring inventory is in the correct locations and conducting regular stock takes. Produce depot transfer notes for stock movement between depots. Check equipment that has come off hire and handle accordingly. Assess and report necessary refurbishment work on customer-sent equipment to HQ for pricing. Keep warehouses swept and tidy on a regular basis. Promote a positive team attitude and work collaboratively. Comply with all health and safety requirements. Complete any necessary training as required. If you have a proven track record of performing similar roles and are interested in joining our team, please apply directly or reach out to our Head of Recruitment for an informal chat. Thank you for considering Team Conquip. We look forward to hearing from you.
Jan 01, 2026
Full time
Position: Yard Operative Hook, Hampshire Location : Hook, Hampshire Working Hours : Monday to Friday from 10am - 8pm (Alternate shifts could be discussed) Salary : Up to £32,(Apply online only) per annum Start Date : As soon as possible Are you a motivated and experienced Yard Operative looking for a new challenge in a fast-paced manufacturing hub? Do you have a 'can-do' attitude and a resourceful approach to your work? If so, this is the perfect opportunity for you to further develop your professional skill set within the engineering, construction & manufacturing industries. This role requires a valid driving licence, access to your own transport, and previous experience using a forklift. Main Purpose of the Role Position Summary: As a Yard Operative, you will be responsible for maintaining and servicing equipment, as well as completing tasks within the target time frame. Your role is crucial in ensuring the efficient and effective operation of our construction hub. Key Responsibilities: Move equipment to and from the washing area. Prepare equipment for washing by removing necessary components. Jet wash equipment to a suitable standard and relocate to the workshop. Adhere to all health and safety standards at all times. Perform basic computer work to complete tasks. Pick orders and load/unload vehicles. Manage the yard and ensure items are in the correct locations. Be flexible with working hours, including early starts as required by the construction industry. Maintain stock control by ensuring inventory is in the correct locations and conducting regular stock takes. Produce depot transfer notes for stock movement between depots. Check equipment that has come off hire and handle accordingly. Assess and report necessary refurbishment work on customer-sent equipment to HQ for pricing. Keep warehouses swept and tidy on a regular basis. Promote a positive team attitude and work collaboratively. Comply with all health and safety requirements. Complete any necessary training as required. If you have a proven track record of performing similar roles and are interested in joining our team, please apply directly or reach out to our Head of Recruitment for an informal chat. Thank you for considering Team Conquip. We look forward to hearing from you.
Trailer Technician We re looking for an experienced Trailer Technician to join a busy engineering team based at Gatwick. You ll be maintaining and repairing trailers and ground support equipment, ensuring everything runs safely, smoothly, and to the highest standards. This is a hands-on role where reliability, precision, and pride in your work really matter. What You ll Be Doing Repair and maintain trailers, dollies, and associated equipment Inspect vehicles airside and in the workshop, reporting faults before work begins Collect equipment for servicing and log all work accurately in SAP Keep the Workshop Supervisor updated on additional work or parts required Liaise with stores for parts supply and ensure everything is labelled and stored correctly Report and quarantine any defective tools or equipment immediately Complete daily timesheets and ensure paperwork is accurate and up to date What You ll Bring Proven experience in vehicle or trailer maintenance and repair Welding or fabrication skills (advantageous) Good communication and organisational ability A customer-focused, problem-solving mindset Health & Safety awareness and a methodical approach Forklift licence (desirable) Hours: Monday to Friday, 9:00am 5:30pm (on-site, Gatwick) Benefits Competitive salary 6% employer pension contribution 3X Salary Life Assurance Health Cash Plan Employee Assistance Programme (EAP) Private medical insurance
Jan 01, 2026
Full time
Trailer Technician We re looking for an experienced Trailer Technician to join a busy engineering team based at Gatwick. You ll be maintaining and repairing trailers and ground support equipment, ensuring everything runs safely, smoothly, and to the highest standards. This is a hands-on role where reliability, precision, and pride in your work really matter. What You ll Be Doing Repair and maintain trailers, dollies, and associated equipment Inspect vehicles airside and in the workshop, reporting faults before work begins Collect equipment for servicing and log all work accurately in SAP Keep the Workshop Supervisor updated on additional work or parts required Liaise with stores for parts supply and ensure everything is labelled and stored correctly Report and quarantine any defective tools or equipment immediately Complete daily timesheets and ensure paperwork is accurate and up to date What You ll Bring Proven experience in vehicle or trailer maintenance and repair Welding or fabrication skills (advantageous) Good communication and organisational ability A customer-focused, problem-solving mindset Health & Safety awareness and a methodical approach Forklift licence (desirable) Hours: Monday to Friday, 9:00am 5:30pm (on-site, Gatwick) Benefits Competitive salary 6% employer pension contribution 3X Salary Life Assurance Health Cash Plan Employee Assistance Programme (EAP) Private medical insurance
Are you an experienced GSE/HGV tech looking for a new challenge? We are seeking a dedicated and detail-oriented professional to join our team. In this role, you will work closely with the Workshop Supervisor to ensure the maintenance and repair of vehicles and plant equipment to the highest standard. Roles and Responsbilities Repair vehicles and plants as requested by the Workshop Supervisor Carry out inspections, brake and smoke tests and show all defects to the Workshop Supervisor before commencing with any repairs or booking out any parts Diagnose and inform the Workshop Supervisor of all work and parts required before commencing job Job card/inspection sheet must be completed correctly to current point of repair and handed to the Workshop Supervisor at the end of each day s shift. All non-productive time is also to be added to the correct job card for authorisation by the Workshop Supervisor Label parts and put them onto correct shelves, e.g. warranty or exchange unit Quarantine, label and report all defective tooling immediately to the site Workshop Supervisor Report any defective items immediately to the Workshop Supervisor Experience and Qualifications Motor Mechanics LGV City & Guilds Level 3 in motor mechanics Forklift (desirable) Operational vehicle/logistical background Experience of working in a customer focused environment Experience in the vehicle maintenance sector Benefits Competitive salary 6% employer pension contribution 3X Salary Life Assurance Health Cash Plan Employee Assistance Programme (EAP) Private medical insurance
Jan 01, 2026
Full time
Are you an experienced GSE/HGV tech looking for a new challenge? We are seeking a dedicated and detail-oriented professional to join our team. In this role, you will work closely with the Workshop Supervisor to ensure the maintenance and repair of vehicles and plant equipment to the highest standard. Roles and Responsbilities Repair vehicles and plants as requested by the Workshop Supervisor Carry out inspections, brake and smoke tests and show all defects to the Workshop Supervisor before commencing with any repairs or booking out any parts Diagnose and inform the Workshop Supervisor of all work and parts required before commencing job Job card/inspection sheet must be completed correctly to current point of repair and handed to the Workshop Supervisor at the end of each day s shift. All non-productive time is also to be added to the correct job card for authorisation by the Workshop Supervisor Label parts and put them onto correct shelves, e.g. warranty or exchange unit Quarantine, label and report all defective tooling immediately to the site Workshop Supervisor Report any defective items immediately to the Workshop Supervisor Experience and Qualifications Motor Mechanics LGV City & Guilds Level 3 in motor mechanics Forklift (desirable) Operational vehicle/logistical background Experience of working in a customer focused environment Experience in the vehicle maintenance sector Benefits Competitive salary 6% employer pension contribution 3X Salary Life Assurance Health Cash Plan Employee Assistance Programme (EAP) Private medical insurance
Field Service Engineer Due to working areas, candidates must live in CT postcode to apply for this position. Join Jungheinrich UK where they offer more than just employment - it provides a career journey built on innovation, sustainability, and global impact. From the first point of contact, candidates experience a recruitment process that is smooth, transparent, and inspiring. Whether applying for roles in engineering, sales, service, or support, individuals join a company that values personal growth and forward-thinking solutions. We are in the search for Job to join Jungheinrich's dynamic team, based at their site. If you have experience in a similar engineering role, you are invited to join Jungheinrich. In this role you'll: The successful candidate will visit various client sites in the area in order to carry out servicing, repairs, and preventative maintenance on a wide range of Jungheinrich material handling equipment and forklift trucks. You will be responsible for the management and control of the parts stock and completing service reports and timesheets. Additional information: Monday - Friday 7:30am - 16:00pm Overtime Available Permanent company benefits Who are we looking for? This position will be suitable for mechanically and electrical biased engineers from any type of maintenance / service background specifically general automotive technicians, HGV, mobile plant, forklift, or ex forces military vehicle engineers. Given the nature of the role, the ideal candidate will hold a full driving license and have previous experience in a customer-facing environment. Additionally, having previously worked unsupervised would be a benefit. ABOUT JUNGHEINRICH Jungheinrich is a global leader in material handling and intralogistics, with a workforce of over 21,000 employees worldwide. Established in 1953 in Hamburg, the company has evolved from a small workshop into a pioneer of logistics technology. From the iconic Ameise pallet truck to advanced automated warehouse systems, Jungheinrich continues to shape the future of intralogistics. The UK operations benefit from a robust service infrastructure, supported by 6,200 service engineers worldwide and a 24-hour spare parts delivery system. Whether supporting customers with tailored solutions or contributing to the development of next-generation electric trucks, employees at Jungheinrich UK play a vital role in shaping the future of intralogistics. Apply now!
Jan 01, 2026
Full time
Field Service Engineer Due to working areas, candidates must live in CT postcode to apply for this position. Join Jungheinrich UK where they offer more than just employment - it provides a career journey built on innovation, sustainability, and global impact. From the first point of contact, candidates experience a recruitment process that is smooth, transparent, and inspiring. Whether applying for roles in engineering, sales, service, or support, individuals join a company that values personal growth and forward-thinking solutions. We are in the search for Job to join Jungheinrich's dynamic team, based at their site. If you have experience in a similar engineering role, you are invited to join Jungheinrich. In this role you'll: The successful candidate will visit various client sites in the area in order to carry out servicing, repairs, and preventative maintenance on a wide range of Jungheinrich material handling equipment and forklift trucks. You will be responsible for the management and control of the parts stock and completing service reports and timesheets. Additional information: Monday - Friday 7:30am - 16:00pm Overtime Available Permanent company benefits Who are we looking for? This position will be suitable for mechanically and electrical biased engineers from any type of maintenance / service background specifically general automotive technicians, HGV, mobile plant, forklift, or ex forces military vehicle engineers. Given the nature of the role, the ideal candidate will hold a full driving license and have previous experience in a customer-facing environment. Additionally, having previously worked unsupervised would be a benefit. ABOUT JUNGHEINRICH Jungheinrich is a global leader in material handling and intralogistics, with a workforce of over 21,000 employees worldwide. Established in 1953 in Hamburg, the company has evolved from a small workshop into a pioneer of logistics technology. From the iconic Ameise pallet truck to advanced automated warehouse systems, Jungheinrich continues to shape the future of intralogistics. The UK operations benefit from a robust service infrastructure, supported by 6,200 service engineers worldwide and a 24-hour spare parts delivery system. Whether supporting customers with tailored solutions or contributing to the development of next-generation electric trucks, employees at Jungheinrich UK play a vital role in shaping the future of intralogistics. Apply now!
The Opportunity: Workshop Engineer Contract: Permanent Location: Dewsbury, Forkway Forkway are one of the UK's leading materials handling solutions providers with around 100 employees across three Handling Centres and a number of strategic service centres. The Impact you will have: To undertake the repair & maintenance of industrial, agricultural and warehousing trucks and ancillary equipment, ensuring maximum profitability and return. To ensure all damage and faults are highlightedand recorded accurately on appropriate Forkway documentation To provide a professional, efficient & responsive service support to customers by means of maintaining & repairing materials handling equipment to the highest standard whilst observing Health and Safety regulations at all times To accurately complete all paperwork required within the role including servicing sheets, breakdown reports, accident reports, timesheets, quotes etc in a timely fashion What will help you to excel in this role: Experience on working on either Cars, Vans, HGVs, Forklift or Plant Be able to strip and reassemble a hydraulic valve bank, cylinder and gear pumps Be able to interpret the test information for main, forward /reverse clutch, torque converter pressure and carry out a full stall test What you can expect from us: Negotiable base salary Future development and career opportunities Contributory pension scheme Profitshare bonus based on business performance What's next If you are interested in joining the Briggs Group then please click on the apply now button and a member of the team will be in touch Not sure if this is the right role for you? Please feel free to visit the careers page on our website and send us your CV speculatively for a member of the team to review If you require any reasonable adjustments to assist you in the interview process, then please contact a member of the Recruitment team and inform them prior to attending so we can ensure these are met
Jan 01, 2026
Full time
The Opportunity: Workshop Engineer Contract: Permanent Location: Dewsbury, Forkway Forkway are one of the UK's leading materials handling solutions providers with around 100 employees across three Handling Centres and a number of strategic service centres. The Impact you will have: To undertake the repair & maintenance of industrial, agricultural and warehousing trucks and ancillary equipment, ensuring maximum profitability and return. To ensure all damage and faults are highlightedand recorded accurately on appropriate Forkway documentation To provide a professional, efficient & responsive service support to customers by means of maintaining & repairing materials handling equipment to the highest standard whilst observing Health and Safety regulations at all times To accurately complete all paperwork required within the role including servicing sheets, breakdown reports, accident reports, timesheets, quotes etc in a timely fashion What will help you to excel in this role: Experience on working on either Cars, Vans, HGVs, Forklift or Plant Be able to strip and reassemble a hydraulic valve bank, cylinder and gear pumps Be able to interpret the test information for main, forward /reverse clutch, torque converter pressure and carry out a full stall test What you can expect from us: Negotiable base salary Future development and career opportunities Contributory pension scheme Profitshare bonus based on business performance What's next If you are interested in joining the Briggs Group then please click on the apply now button and a member of the team will be in touch Not sure if this is the right role for you? Please feel free to visit the careers page on our website and send us your CV speculatively for a member of the team to review If you require any reasonable adjustments to assist you in the interview process, then please contact a member of the Recruitment team and inform them prior to attending so we can ensure these are met
An excellent opportunity for an experienced Plant Fitter / Mechanic to join a well-established company! Job Type: Full-Time - Permanent. Salary: £36,500 - £42,500 Per Annum, Depending on Experience. Location: Great Totham, Maldon CM9. About The Company: The company are a Family Business in Great Totham Essex who specialise in professional ground care machinery, with clients ranging from Schools, Contractors, Councils and private estates, their customers are all professional people. Their goal is to provide high levels of customer service along with the best quality products to professional customers, They have Staff members here from various mechanical backgrounds including car mechanics, Plant fitters, forklift mechanics, HGV Fitters, Agricultural engineers. They have picked up the work very quickly, any of these trades will find their existing skills are very useful here. The Machines (mostly professional mowers like the Ransomes Parkway) are very nice to work on, everything is easily accessible, the work is not back breaking like Plant and HGV, pleasant atmosphere, nice working environment. About The Role: They have a Position available for an active professional Plant fitter / mechanic. Successful applicants will be reconditioning plant and machinery to like new standard, maintaining a fleet of machines and organising pre delivery inspections on reconditioned machines. This Role will suit people who enjoy working to a high standard and taking pride in their work. Candidate Requirements: Diesel engine experience, fault finding (Kubota and Yanmar engines) Working knowledge of auto electrical systems, Relays fuses switches etc basic circuits fault finding Welding - gas, arc and mig all mild steel Full driving license A positive attitude Optional skills spray painting, tyre changing, welding, engineering, lathe work, Heated workshop with storage for tools (all insured) Some on site work available Inhouse training provided Forklift and telehandler training tickets will be provided Additional Info: 40 hr standard week 8.00am - 4.30pm Mon - Thursday 07:30 - 4pm Friday 20 days paid holiday plus bank holidays Overtime available Job Types: Full-time, Permanent Salary dependant on experience but always good rates of pay Company van + fuel may be available Company Benefits: Flexible working hours On-site parking Staff discounts Workwear and overalls supplied Good Health and safety Overtime available Air-conditioned canteen Heated workshops Friendly Additional leave Casual dress Company events Company pension Sick pay Training provided - forklift and telehandler If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Jan 01, 2026
Full time
An excellent opportunity for an experienced Plant Fitter / Mechanic to join a well-established company! Job Type: Full-Time - Permanent. Salary: £36,500 - £42,500 Per Annum, Depending on Experience. Location: Great Totham, Maldon CM9. About The Company: The company are a Family Business in Great Totham Essex who specialise in professional ground care machinery, with clients ranging from Schools, Contractors, Councils and private estates, their customers are all professional people. Their goal is to provide high levels of customer service along with the best quality products to professional customers, They have Staff members here from various mechanical backgrounds including car mechanics, Plant fitters, forklift mechanics, HGV Fitters, Agricultural engineers. They have picked up the work very quickly, any of these trades will find their existing skills are very useful here. The Machines (mostly professional mowers like the Ransomes Parkway) are very nice to work on, everything is easily accessible, the work is not back breaking like Plant and HGV, pleasant atmosphere, nice working environment. About The Role: They have a Position available for an active professional Plant fitter / mechanic. Successful applicants will be reconditioning plant and machinery to like new standard, maintaining a fleet of machines and organising pre delivery inspections on reconditioned machines. This Role will suit people who enjoy working to a high standard and taking pride in their work. Candidate Requirements: Diesel engine experience, fault finding (Kubota and Yanmar engines) Working knowledge of auto electrical systems, Relays fuses switches etc basic circuits fault finding Welding - gas, arc and mig all mild steel Full driving license A positive attitude Optional skills spray painting, tyre changing, welding, engineering, lathe work, Heated workshop with storage for tools (all insured) Some on site work available Inhouse training provided Forklift and telehandler training tickets will be provided Additional Info: 40 hr standard week 8.00am - 4.30pm Mon - Thursday 07:30 - 4pm Friday 20 days paid holiday plus bank holidays Overtime available Job Types: Full-time, Permanent Salary dependant on experience but always good rates of pay Company van + fuel may be available Company Benefits: Flexible working hours On-site parking Staff discounts Workwear and overalls supplied Good Health and safety Overtime available Air-conditioned canteen Heated workshops Friendly Additional leave Casual dress Company events Company pension Sick pay Training provided - forklift and telehandler If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
An excellent opportunity for an experienced Metalshop Supervisor to join a well-established company! Job Type: Full-Time, Permanent. Salary: £30,000 - £34,000 Per Annum, Depending on Experience. Location: Nottingham NG7. Schedule: 38 hours per week (Mon-Thu 8am-4:45pm, Fri 8am-1pm), with occasional paid overtime where required. About The Company: The company are one of the UK's leading set construction companies, bringing spectacular productions to life to the West End, Broadway, across the UK, and internationally. Working with some of the best designers in the business, they combine artistry, craftsmanship, and technical expertise to deliver exceptional scenic builds. They are seeking a skilled metalworker with a proven track record of project leadership and team management for the role of Metalshop Supervisor. About The Role: The Metalshop Supervisor will support the delivery of all metal fabrication work within the workshop. This role focuses on day-to-day departmental management, ensuring projects are completed safely, efficiently, and to the highest technical standard. You will lead the workflow of the team, organise tasks, manage materials and equipment, and maintain high-quality craftsmanship across all builds. You will report directly to the Head of Metalshop (Director), escalating major decisions, complex fabrication challenges, and creative technical solutions as required. This role is perfect for a highly skilled fabricator who is ready to step into a leadership and coordination role. Key Responsibilities: Day-to-Day Department Management Assist the overseeing of the daily running of the metalshop, ensuring smooth workflow and productive use of the team's time Delegate tasks to metalworkers based on project priorities and deadlines Maintain clear communication with the Head of metalshop, project managers, and other workshop departments Track progress and flag any issues, delays, or concerns promptly Ensure all work meets quality and structural standards, and artistic specifications Technical & Fabrication Work Carry out hands-on fabrication, welding, and engineering tasks as part of the workshop team Apply excellent problem-solving skills to develop practical solutions within time and budget. Identify when a fabrication challenge requires input from the Head of metalshop (e.g., complex structures, creative mechanisms, innovative techniques) Leadership & Team Support Provide day-to-day supervision, guidance, and support for metalshop staff and freelancers Foster a safe, positive, and collaborative working environment Offer mentoring and skill development where needed Uphold workshop standards for professionalism, communication, and teamwork Health & Safety Ensure all work adheres to health and safety regulations, including risk assessments and safe operating procedures Promote best practice in manual handling, machine use, welding, and workshop conduct Maintain a clean, organised workshop environment Materials & Equipment Monitor stock levels of consumables and materials; order items in advance of need Maintain machinery, tools, and equipment, organising repairs or servicing when required Ensure machines are used correctly and safely by all staff Candidate Requirements: Essential Strong professional experience in metal fabrication Confident in MIG/TIG welding, metalwork machinery, structural assembly, and engineering principles Ability to lead a small team, delegate tasks, and oversee workshop workflow Excellent problem-solving skills and technical creativity Ability to read and interpret technical drawings, CAD, and design references Reliable, organised, and able to work under pressure to meet deadlines Strong communication skills and a collaborative approach Good understanding of workshop health and safety practices Desirable Experience in scenic fabrication or entertainment industry work IPAF, forklift, or other workshop equipment certifications If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
Jan 01, 2026
Full time
An excellent opportunity for an experienced Metalshop Supervisor to join a well-established company! Job Type: Full-Time, Permanent. Salary: £30,000 - £34,000 Per Annum, Depending on Experience. Location: Nottingham NG7. Schedule: 38 hours per week (Mon-Thu 8am-4:45pm, Fri 8am-1pm), with occasional paid overtime where required. About The Company: The company are one of the UK's leading set construction companies, bringing spectacular productions to life to the West End, Broadway, across the UK, and internationally. Working with some of the best designers in the business, they combine artistry, craftsmanship, and technical expertise to deliver exceptional scenic builds. They are seeking a skilled metalworker with a proven track record of project leadership and team management for the role of Metalshop Supervisor. About The Role: The Metalshop Supervisor will support the delivery of all metal fabrication work within the workshop. This role focuses on day-to-day departmental management, ensuring projects are completed safely, efficiently, and to the highest technical standard. You will lead the workflow of the team, organise tasks, manage materials and equipment, and maintain high-quality craftsmanship across all builds. You will report directly to the Head of Metalshop (Director), escalating major decisions, complex fabrication challenges, and creative technical solutions as required. This role is perfect for a highly skilled fabricator who is ready to step into a leadership and coordination role. Key Responsibilities: Day-to-Day Department Management Assist the overseeing of the daily running of the metalshop, ensuring smooth workflow and productive use of the team's time Delegate tasks to metalworkers based on project priorities and deadlines Maintain clear communication with the Head of metalshop, project managers, and other workshop departments Track progress and flag any issues, delays, or concerns promptly Ensure all work meets quality and structural standards, and artistic specifications Technical & Fabrication Work Carry out hands-on fabrication, welding, and engineering tasks as part of the workshop team Apply excellent problem-solving skills to develop practical solutions within time and budget. Identify when a fabrication challenge requires input from the Head of metalshop (e.g., complex structures, creative mechanisms, innovative techniques) Leadership & Team Support Provide day-to-day supervision, guidance, and support for metalshop staff and freelancers Foster a safe, positive, and collaborative working environment Offer mentoring and skill development where needed Uphold workshop standards for professionalism, communication, and teamwork Health & Safety Ensure all work adheres to health and safety regulations, including risk assessments and safe operating procedures Promote best practice in manual handling, machine use, welding, and workshop conduct Maintain a clean, organised workshop environment Materials & Equipment Monitor stock levels of consumables and materials; order items in advance of need Maintain machinery, tools, and equipment, organising repairs or servicing when required Ensure machines are used correctly and safely by all staff Candidate Requirements: Essential Strong professional experience in metal fabrication Confident in MIG/TIG welding, metalwork machinery, structural assembly, and engineering principles Ability to lead a small team, delegate tasks, and oversee workshop workflow Excellent problem-solving skills and technical creativity Ability to read and interpret technical drawings, CAD, and design references Reliable, organised, and able to work under pressure to meet deadlines Strong communication skills and a collaborative approach Good understanding of workshop health and safety practices Desirable Experience in scenic fabrication or entertainment industry work IPAF, forklift, or other workshop equipment certifications If you feel that you have the relative skills/attributes to fulfil this role then please apply now for immediate consideration. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need.
