Job Title: Principal Product Safety Engineer Location: Broad Oak, Frimley, New Malden or Filton. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Circa £70,000 depending on qualifications and experience What you'll be doing: Providing support to the functions Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within. Responsible for product safety strategy/argument assessment against major subsystems or key complex technologies. Production of high-quality submissions including hazard logs, safety cases and safety plans. Organising and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required. Working with the Technical Authority teams and embedded Safety Engineers in collating adequate product safety related evidence to support the safety case argument and acceptance via the Requirements and Acceptance Team. Your skills and experiences: Knowledge of safety management processes and techniques Experience of working in more than one phase of the Engineering Lifecycle, with sufficient experience of design principles to enable a good understanding of adjacent phases and through life engineering issues Awareness of customer defence standards such as: DSA-02, JSP430, Def Stan 00-56, MilStn 882E, BS EN 61508 Familiar with the principles of a Safety Management System Experienced in writing technical documentation to an elevated level Experience in Product Safety within Software Systems would be advantageous Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety team: The Combat System is the heart of any platform, and being part of integrating these complex systems safely through design and assurance is the role of the Product Safety team. Working independently and collaboratively with a like-minded Product Safety Engineers, you will be critical is underpinning the integrity of cutting-edge technology from design concept through to disposal. As a valued stakeholder working alongside Design Technical Authorities, you will play a pivotal role challenging norm as well of bringing new ideas to table across a varied and ever-changing portfolio of Combat System projects. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 23rd January 2026 - Interviews will be held w/c 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 10, 2026
Full time
Job Title: Principal Product Safety Engineer Location: Broad Oak, Frimley, New Malden or Filton. We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Circa £70,000 depending on qualifications and experience What you'll be doing: Providing support to the functions Technical Authority teams with the management of the hazards, risks and associated mitigations and contribute to the development of the hazard log and the maturity of information contained within. Responsible for product safety strategy/argument assessment against major subsystems or key complex technologies. Production of high-quality submissions including hazard logs, safety cases and safety plans. Organising and facilitate HAZIDs and review meetings and contribute to other HAZIDs when required. Working with the Technical Authority teams and embedded Safety Engineers in collating adequate product safety related evidence to support the safety case argument and acceptance via the Requirements and Acceptance Team. Your skills and experiences: Knowledge of safety management processes and techniques Experience of working in more than one phase of the Engineering Lifecycle, with sufficient experience of design principles to enable a good understanding of adjacent phases and through life engineering issues Awareness of customer defence standards such as: DSA-02, JSP430, Def Stan 00-56, MilStn 882E, BS EN 61508 Familiar with the principles of a Safety Management System Experienced in writing technical documentation to an elevated level Experience in Product Safety within Software Systems would be advantageous Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Product Safety team: The Combat System is the heart of any platform, and being part of integrating these complex systems safely through design and assurance is the role of the Product Safety team. Working independently and collaboratively with a like-minded Product Safety Engineers, you will be critical is underpinning the integrity of cutting-edge technology from design concept through to disposal. As a valued stakeholder working alongside Design Technical Authorities, you will play a pivotal role challenging norm as well of bringing new ideas to table across a varied and ever-changing portfolio of Combat System projects. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 23rd January 2026 - Interviews will be held w/c 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Systems Engineer Salary: Circa £67,000 dependent on skills and experience Location: Broad Oak, New Malden, Frimley - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Ensuring that the FTEWA TDP (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) solution meets the product vision, interpreting product requirements, making and documenting high level design decisions and specifying the technical solution. The software design artefacts including: Analysis of System and Software requirements; System specification; Internal and external interface definition; Identifying and managing technical risk; Sell-off of product requirements. Following and supporting the DevSecOps approach to development including: Coordinating the design activity across component design and architectural features; Identifying which elements of the design are being brought into the next Sprint(s) and ensuring that there is sufficient maturity in the design; Ensuring the system and software design integrity and safety meets the required maturity and quality for the FTEWA TDP product. Technical assurance of engineering outputs, including detailed designs, interface specifications and qualification evidence. Your skills and experiences: Essential: System and Software Design Ability to manage complex technical issues and make engineering judgements based on own knowledge and experience Hands-on knowledge of Enterprise Architect Experience of operating within the Agile software development methodology (DevSecOps) Experience of the Azure cloud computing environment Knowledge and experience of: Requirements Analysis, Configuration Management, Human Factors, Interface Analysis, Performance Analysis, Product Safety Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Naval Ships Combat Systems FTEWA TDP team: The BAE Systems Naval Ships Combat Systems FTEWA TDP Team (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) use cutting edge technologies to design, develop, integrate and support naval combat system products that enable navies to protect nations. The team contributes to the Naval Ships core product, the Combat Management System, is the 'brains' of the ship, allowing crews to understand the tactical situation and to rapidly respond to potentially life-threatening situations. This role will help to ensure that naval crews around the world can continue to receive and utilise the most modern capabilities possible in a challenging and ever-changing environment. We offer significant opportunities for committed employees to learn and develop with us. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 23rd January 2026 - Interviews will take place w/c 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 10, 2026
Full time
Job Title: Principal Systems Engineer Salary: Circa £67,000 dependent on skills and experience Location: Broad Oak, New Malden, Frimley - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Ensuring that the FTEWA TDP (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) solution meets the product vision, interpreting product requirements, making and documenting high level design decisions and specifying the technical solution. The software design artefacts including: Analysis of System and Software requirements; System specification; Internal and external interface definition; Identifying and managing technical risk; Sell-off of product requirements. Following and supporting the DevSecOps approach to development including: Coordinating the design activity across component design and architectural features; Identifying which elements of the design are being brought into the next Sprint(s) and ensuring that there is sufficient maturity in the design; Ensuring the system and software design integrity and safety meets the required maturity and quality for the FTEWA TDP product. Technical assurance of engineering outputs, including detailed designs, interface specifications and qualification evidence. Your skills and experiences: Essential: System and Software Design Ability to manage complex technical issues and make engineering judgements based on own knowledge and experience Hands-on knowledge of Enterprise Architect Experience of operating within the Agile software development methodology (DevSecOps) Experience of the Azure cloud computing environment Knowledge and experience of: Requirements Analysis, Configuration Management, Human Factors, Interface Analysis, Performance Analysis, Product Safety Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Naval Ships Combat Systems FTEWA TDP team: The BAE Systems Naval Ships Combat Systems FTEWA TDP Team (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) use cutting edge technologies to design, develop, integrate and support naval combat system products that enable navies to protect nations. The team contributes to the Naval Ships core product, the Combat Management System, is the 'brains' of the ship, allowing crews to understand the tactical situation and to rapidly respond to potentially life-threatening situations. This role will help to ensure that naval crews around the world can continue to receive and utilise the most modern capabilities possible in a challenging and ever-changing environment. We offer significant opportunities for committed employees to learn and develop with us. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 23rd January 2026 - Interviews will take place w/c 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Systems Engineer Salary: Circa £67,000 dependent on skills and experience Location: Broad Oak, New Malden, Frimley - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Ensuring that the FTEWA TDP (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) solution meets the product vision, interpreting product requirements, making and documenting high level design decisions and specifying the technical solution. The software design artefacts including: Analysis of System and Software requirements; System specification; Internal and external interface definition; Identifying and managing technical risk; Sell-off of product requirements. Following and supporting the DevSecOps approach to development including: Coordinating the design activity across component design and architectural features; Identifying which elements of the design are being brought into the next Sprint(s) and ensuring that there is sufficient maturity in the design; Ensuring the system and software design integrity and safety meets the required maturity and quality for the FTEWA TDP product. Technical assurance of engineering outputs, including detailed designs, interface specifications and qualification evidence. Your skills and experiences: Essential: System and Software Design Ability to manage complex technical issues and make engineering judgements based on own knowledge and experience Hands-on knowledge of Enterprise Architect Experience of operating within the Agile software development methodology (DevSecOps) Experience of the Azure cloud computing environment Knowledge and experience of: Requirements Analysis, Configuration Management, Human Factors, Interface Analysis, Performance Analysis, Product Safety Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Naval Ships Combat Systems FTEWA TDP team: The BAE Systems Naval Ships Combat Systems FTEWA TDP Team (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) use cutting edge technologies to design, develop, integrate and support naval combat system products that enable navies to protect nations. The team contributes to the Naval Ships core product, the Combat Management System, is the 'brains' of the ship, allowing crews to understand the tactical situation and to rapidly respond to potentially life-threatening situations. This role will help to ensure that naval crews around the world can continue to receive and utilise the most modern capabilities possible in a challenging and ever-changing environment. We offer significant opportunities for committed employees to learn and develop with us. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 23rd January 2026 - Interviews will take place w/c 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 10, 2026
Full time
Job Title: Principal Systems Engineer Salary: Circa £67,000 dependent on skills and experience Location: Broad Oak, New Malden, Frimley - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Ensuring that the FTEWA TDP (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) solution meets the product vision, interpreting product requirements, making and documenting high level design decisions and specifying the technical solution. The software design artefacts including: Analysis of System and Software requirements; System specification; Internal and external interface definition; Identifying and managing technical risk; Sell-off of product requirements. Following and supporting the DevSecOps approach to development including: Coordinating the design activity across component design and architectural features; Identifying which elements of the design are being brought into the next Sprint(s) and ensuring that there is sufficient maturity in the design; Ensuring the system and software design integrity and safety meets the required maturity and quality for the FTEWA TDP product. Technical assurance of engineering outputs, including detailed designs, interface specifications and qualification evidence. Your skills and experiences: Essential: System and Software Design Ability to manage complex technical issues and make engineering judgements based on own knowledge and experience Hands-on knowledge of Enterprise Architect Experience of operating within the Agile software development methodology (DevSecOps) Experience of the Azure cloud computing environment Knowledge and experience of: Requirements Analysis, Configuration Management, Human Factors, Interface Analysis, Performance Analysis, Product Safety Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Naval Ships Combat Systems FTEWA TDP team: The BAE Systems Naval Ships Combat Systems FTEWA TDP Team (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) use cutting edge technologies to design, develop, integrate and support naval combat system products that enable navies to protect nations. The team contributes to the Naval Ships core product, the Combat Management System, is the 'brains' of the ship, allowing crews to understand the tactical situation and to rapidly respond to potentially life-threatening situations. This role will help to ensure that naval crews around the world can continue to receive and utilise the most modern capabilities possible in a challenging and ever-changing environment. We offer significant opportunities for committed employees to learn and develop with us. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 23rd January 2026 - Interviews will take place w/c 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Systems Engineer Salary: Circa £67,000 dependent on skills and experience Location: Broad Oak, New Malden, Frimley - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Ensuring that the FTEWA TDP (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) solution meets the product vision, interpreting product requirements, making and documenting high level design decisions and specifying the technical solution. The software design artefacts including: Analysis of System and Software requirements; System specification; Internal and external interface definition; Identifying and managing technical risk; Sell-off of product requirements. Following and supporting the DevSecOps approach to development including: Coordinating the design activity across component design and architectural features; Identifying which elements of the design are being brought into the next Sprint(s) and ensuring that there is sufficient maturity in the design; Ensuring the system and software design integrity and safety meets the required maturity and quality for the FTEWA TDP product. Technical assurance of engineering outputs, including detailed designs, interface specifications and qualification evidence. Your skills and experiences: Essential: System and Software Design Ability to manage complex technical issues and make engineering judgements based on own knowledge and experience Hands-on knowledge of Enterprise Architect Experience of operating within the Agile software development methodology (DevSecOps) Experience of the Azure cloud computing environment Knowledge and experience of: Requirements Analysis, Configuration Management, Human Factors, Interface Analysis, Performance Analysis, Product Safety Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Naval Ships Combat Systems FTEWA TDP team: The BAE Systems Naval Ships Combat Systems FTEWA TDP Team (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) use cutting edge technologies to design, develop, integrate and support naval combat system products that enable navies to protect nations. The team contributes to the Naval Ships core product, the Combat Management System, is the 'brains' of the ship, allowing crews to understand the tactical situation and to rapidly respond to potentially life-threatening situations. This role will help to ensure that naval crews around the world can continue to receive and utilise the most modern capabilities possible in a challenging and ever-changing environment. We offer significant opportunities for committed employees to learn and develop with us. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 23rd January 2026 - Interviews will take place w/c 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 10, 2026
Full time
Job Title: Principal Systems Engineer Salary: Circa £67,000 dependent on skills and experience Location: Broad Oak, New Malden, Frimley - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Ensuring that the FTEWA TDP (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) solution meets the product vision, interpreting product requirements, making and documenting high level design decisions and specifying the technical solution. The software design artefacts including: Analysis of System and Software requirements; System specification; Internal and external interface definition; Identifying and managing technical risk; Sell-off of product requirements. Following and supporting the DevSecOps approach to development including: Coordinating the design activity across component design and architectural features; Identifying which elements of the design are being brought into the next Sprint(s) and ensuring that there is sufficient maturity in the design; Ensuring the system and software design integrity and safety meets the required maturity and quality for the FTEWA TDP product. Technical assurance of engineering outputs, including detailed designs, interface specifications and qualification evidence. Your skills and experiences: Essential: System and Software Design Ability to manage complex technical issues and make engineering judgements based on own knowledge and experience Hands-on knowledge of Enterprise Architect Experience of operating within the Agile software development methodology (DevSecOps) Experience of the Azure cloud computing environment Knowledge and experience of: Requirements Analysis, Configuration Management, Human Factors, Interface Analysis, Performance Analysis, Product Safety Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Naval Ships Combat Systems FTEWA TDP team: The BAE Systems Naval Ships Combat Systems FTEWA TDP Team (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) use cutting edge technologies to design, develop, integrate and support naval combat system products that enable navies to protect nations. The team contributes to the Naval Ships core product, the Combat Management System, is the 'brains' of the ship, allowing crews to understand the tactical situation and to rapidly respond to potentially life-threatening situations. This role will help to ensure that naval crews around the world can continue to receive and utilise the most modern capabilities possible in a challenging and ever-changing environment. We offer significant opportunities for committed employees to learn and develop with us. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 23rd January 2026 - Interviews will take place w/c 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Systems Engineer Salary: Circa £67,000 dependent on skills and experience Location: Broad Oak, New Malden, Frimley - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Ensuring that the FTEWA TDP (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) solution meets the product vision, interpreting product requirements, making and documenting high level design decisions and specifying the technical solution. The software design artefacts including: Analysis of System and Software requirements; System specification; Internal and external interface definition; Identifying and managing technical risk; Sell-off of product requirements. Following and supporting the DevSecOps approach to development including: Coordinating the design activity across component design and architectural features; Identifying which elements of the design are being brought into the next Sprint(s) and ensuring that there is sufficient maturity in the design; Ensuring the system and software design integrity and safety meets the required maturity and quality for the FTEWA TDP product. Technical assurance of engineering outputs, including detailed designs, interface specifications and qualification evidence. Your skills and experiences: Essential: System and Software Design Ability to manage complex technical issues and make engineering judgements based on own knowledge and experience Hands-on knowledge of Enterprise Architect Experience of operating within the Agile software development methodology (DevSecOps) Experience of the Azure cloud computing environment Knowledge and experience of: Requirements Analysis, Configuration Management, Human Factors, Interface Analysis, Performance Analysis, Product Safety Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Naval Ships Combat Systems FTEWA TDP team: The BAE Systems Naval Ships Combat Systems FTEWA TDP Team (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) use cutting edge technologies to design, develop, integrate and support naval combat system products that enable navies to protect nations. The team contributes to the Naval Ships core product, the Combat Management System, is the 'brains' of the ship, allowing crews to understand the tactical situation and to rapidly respond to potentially life-threatening situations. This role will help to ensure that naval crews around the world can continue to receive and utilise the most modern capabilities possible in a challenging and ever-changing environment. We offer significant opportunities for committed employees to learn and develop with us. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 23rd January 2026 - Interviews will take place w/c 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 10, 2026
Full time
Job Title: Principal Systems Engineer Salary: Circa £67,000 dependent on skills and experience Location: Broad Oak, New Malden, Frimley - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Ensuring that the FTEWA TDP (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) solution meets the product vision, interpreting product requirements, making and documenting high level design decisions and specifying the technical solution. The software design artefacts including: Analysis of System and Software requirements; System specification; Internal and external interface definition; Identifying and managing technical risk; Sell-off of product requirements. Following and supporting the DevSecOps approach to development including: Coordinating the design activity across component design and architectural features; Identifying which elements of the design are being brought into the next Sprint(s) and ensuring that there is sufficient maturity in the design; Ensuring the system and software design integrity and safety meets the required maturity and quality for the FTEWA TDP product. Technical assurance of engineering outputs, including detailed designs, interface specifications and qualification evidence. Your skills and experiences: Essential: System and Software Design Ability to manage complex technical issues and make engineering judgements based on own knowledge and experience Hands-on knowledge of Enterprise Architect Experience of operating within the Agile software development methodology (DevSecOps) Experience of the Azure cloud computing environment Knowledge and experience of: Requirements Analysis, Configuration Management, Human Factors, Interface Analysis, Performance Analysis, Product Safety Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Naval Ships Combat Systems FTEWA TDP team: The BAE Systems Naval Ships Combat Systems FTEWA TDP Team (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) use cutting edge technologies to design, develop, integrate and support naval combat system products that enable navies to protect nations. The team contributes to the Naval Ships core product, the Combat Management System, is the 'brains' of the ship, allowing crews to understand the tactical situation and to rapidly respond to potentially life-threatening situations. This role will help to ensure that naval crews around the world can continue to receive and utilise the most modern capabilities possible in a challenging and ever-changing environment. We offer significant opportunities for committed employees to learn and develop with us. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 23rd January 2026 - Interviews will take place w/c 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Systems Engineer Salary: Circa £67,000 dependent on skills and experience Location: Broad Oak, New Malden, Frimley - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Ensuring that the FTEWA TDP (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) solution meets the product vision, interpreting product requirements, making and documenting high level design decisions and specifying the technical solution. The software design artefacts including: Analysis of System and Software requirements; System specification; Internal and external interface definition; Identifying and managing technical risk; Sell-off of product requirements. Following and supporting the DevSecOps approach to development including: Coordinating the design activity across component design and architectural features; Identifying which elements of the design are being brought into the next Sprint(s) and ensuring that there is sufficient maturity in the design; Ensuring the system and software design integrity and safety meets the required maturity and quality for the FTEWA TDP product. Technical assurance of engineering outputs, including detailed designs, interface specifications and qualification evidence. Your skills and experiences: Essential: System and Software Design Ability to manage complex technical issues and make engineering judgements based on own knowledge and experience Hands-on knowledge of Enterprise Architect Experience of operating within the Agile software development methodology (DevSecOps) Experience of the Azure cloud computing environment Knowledge and experience of: Requirements Analysis, Configuration Management, Human Factors, Interface Analysis, Performance Analysis, Product Safety Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Naval Ships Combat Systems FTEWA TDP team: The BAE Systems Naval Ships Combat Systems FTEWA TDP Team (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) use cutting edge technologies to design, develop, integrate and support naval combat system products that enable navies to protect nations. The team contributes to the Naval Ships core product, the Combat Management System, is the 'brains' of the ship, allowing crews to understand the tactical situation and to rapidly respond to potentially life-threatening situations. This role will help to ensure that naval crews around the world can continue to receive and utilise the most modern capabilities possible in a challenging and ever-changing environment. We offer significant opportunities for committed employees to learn and develop with us. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 23rd January 2026 - Interviews will take place w/c 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 10, 2026
Full time
Job Title: Principal Systems Engineer Salary: Circa £67,000 dependent on skills and experience Location: Broad Oak, New Malden, Frimley - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Ensuring that the FTEWA TDP (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) solution meets the product vision, interpreting product requirements, making and documenting high level design decisions and specifying the technical solution. The software design artefacts including: Analysis of System and Software requirements; System specification; Internal and external interface definition; Identifying and managing technical risk; Sell-off of product requirements. Following and supporting the DevSecOps approach to development including: Coordinating the design activity across component design and architectural features; Identifying which elements of the design are being brought into the next Sprint(s) and ensuring that there is sufficient maturity in the design; Ensuring the system and software design integrity and safety meets the required maturity and quality for the FTEWA TDP product. Technical assurance of engineering outputs, including detailed designs, interface specifications and qualification evidence. Your skills and experiences: Essential: System and Software Design Ability to manage complex technical issues and make engineering judgements based on own knowledge and experience Hands-on knowledge of Enterprise Architect Experience of operating within the Agile software development methodology (DevSecOps) Experience of the Azure cloud computing environment Knowledge and experience of: Requirements Analysis, Configuration Management, Human Factors, Interface Analysis, Performance Analysis, Product Safety Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Naval Ships Combat Systems FTEWA TDP team: The BAE Systems Naval Ships Combat Systems FTEWA TDP Team (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) use cutting edge technologies to design, develop, integrate and support naval combat system products that enable navies to protect nations. The team contributes to the Naval Ships core product, the Combat Management System, is the 'brains' of the ship, allowing crews to understand the tactical situation and to rapidly respond to potentially life-threatening situations. This role will help to ensure that naval crews around the world can continue to receive and utilise the most modern capabilities possible in a challenging and ever-changing environment. We offer significant opportunities for committed employees to learn and develop with us. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 23rd January 2026 - Interviews will take place w/c 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Systems Engineer Salary: Circa £67,000 dependent on skills and experience Location: Broad Oak, New Malden, Frimley - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Ensuring that the FTEWA TDP (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) solution meets the product vision, interpreting product requirements, making and documenting high level design decisions and specifying the technical solution. The software design artefacts including: Analysis of System and Software requirements; System specification; Internal and external interface definition; Identifying and managing technical risk; Sell-off of product requirements. Following and supporting the DevSecOps approach to development including: Coordinating the design activity across component design and architectural features; Identifying which elements of the design are being brought into the next Sprint(s) and ensuring that there is sufficient maturity in the design; Ensuring the system and software design integrity and safety meets the required maturity and quality for the FTEWA TDP product. Technical assurance of engineering outputs, including detailed designs, interface specifications and qualification evidence. Your skills and experiences: Essential: System and Software Design Ability to manage complex technical issues and make engineering judgements based on own knowledge and experience Hands-on knowledge of Enterprise Architect Experience of operating within the Agile software development methodology (DevSecOps) Experience of the Azure cloud computing environment Knowledge and experience of: Requirements Analysis, Configuration Management, Human Factors, Interface Analysis, Performance Analysis, Product Safety Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Naval Ships Combat Systems FTEWA TDP team: The BAE Systems Naval Ships Combat Systems FTEWA TDP Team (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) use cutting edge technologies to design, develop, integrate and support naval combat system products that enable navies to protect nations. The team contributes to the Naval Ships core product, the Combat Management System, is the 'brains' of the ship, allowing crews to understand the tactical situation and to rapidly respond to potentially life-threatening situations. This role will help to ensure that naval crews around the world can continue to receive and utilise the most modern capabilities possible in a challenging and ever-changing environment. We offer significant opportunities for committed employees to learn and develop with us. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 23rd January 2026 - Interviews will take place w/c 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 10, 2026
Full time
Job Title: Principal Systems Engineer Salary: Circa £67,000 dependent on skills and experience Location: Broad Oak, New Malden, Frimley - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Ensuring that the FTEWA TDP (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) solution meets the product vision, interpreting product requirements, making and documenting high level design decisions and specifying the technical solution. The software design artefacts including: Analysis of System and Software requirements; System specification; Internal and external interface definition; Identifying and managing technical risk; Sell-off of product requirements. Following and supporting the DevSecOps approach to development including: Coordinating the design activity across component design and architectural features; Identifying which elements of the design are being brought into the next Sprint(s) and ensuring that there is sufficient maturity in the design; Ensuring the system and software design integrity and safety meets the required maturity and quality for the FTEWA TDP product. Technical assurance of engineering outputs, including detailed designs, interface specifications and qualification evidence. Your skills and experiences: Essential: System and Software Design Ability to manage complex technical issues and make engineering judgements based on own knowledge and experience Hands-on knowledge of Enterprise Architect Experience of operating within the Agile software development methodology (DevSecOps) Experience of the Azure cloud computing environment Knowledge and experience of: Requirements Analysis, Configuration Management, Human Factors, Interface Analysis, Performance Analysis, Product Safety Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Naval Ships Combat Systems FTEWA TDP team: The BAE Systems Naval Ships Combat Systems FTEWA TDP Team (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) use cutting edge technologies to design, develop, integrate and support naval combat system products that enable navies to protect nations. The team contributes to the Naval Ships core product, the Combat Management System, is the 'brains' of the ship, allowing crews to understand the tactical situation and to rapidly respond to potentially life-threatening situations. This role will help to ensure that naval crews around the world can continue to receive and utilise the most modern capabilities possible in a challenging and ever-changing environment. We offer significant opportunities for committed employees to learn and develop with us. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 23rd January 2026 - Interviews will take place w/c 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Principal Systems Engineer Salary: Circa £67,000 dependent on skills and experience Location: Broad Oak, New Malden, Frimley - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Ensuring that the FTEWA TDP (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) solution meets the product vision, interpreting product requirements, making and documenting high level design decisions and specifying the technical solution. The software design artefacts including: Analysis of System and Software requirements; System specification; Internal and external interface definition; Identifying and managing technical risk; Sell-off of product requirements. Following and supporting the DevSecOps approach to development including: Coordinating the design activity across component design and architectural features; Identifying which elements of the design are being brought into the next Sprint(s) and ensuring that there is sufficient maturity in the design; Ensuring the system and software design integrity and safety meets the required maturity and quality for the FTEWA TDP product. Technical assurance of engineering outputs, including detailed designs, interface specifications and qualification evidence. Your skills and experiences: Essential: System and Software Design Ability to manage complex technical issues and make engineering judgements based on own knowledge and experience Hands-on knowledge of Enterprise Architect Experience of operating within the Agile software development methodology (DevSecOps) Experience of the Azure cloud computing environment Knowledge and experience of: Requirements Analysis, Configuration Management, Human Factors, Interface Analysis, Performance Analysis, Product Safety Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Naval Ships Combat Systems FTEWA TDP team: The BAE Systems Naval Ships Combat Systems FTEWA TDP Team (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) use cutting edge technologies to design, develop, integrate and support naval combat system products that enable navies to protect nations. The team contributes to the Naval Ships core product, the Combat Management System, is the 'brains' of the ship, allowing crews to understand the tactical situation and to rapidly respond to potentially life-threatening situations. This role will help to ensure that naval crews around the world can continue to receive and utilise the most modern capabilities possible in a challenging and ever-changing environment. We offer significant opportunities for committed employees to learn and develop with us. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 23rd January 2026 - Interviews will take place w/c 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 10, 2026
Full time
Job Title: Principal Systems Engineer Salary: Circa £67,000 dependent on skills and experience Location: Broad Oak, New Malden, Frimley - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: Ensuring that the FTEWA TDP (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) solution meets the product vision, interpreting product requirements, making and documenting high level design decisions and specifying the technical solution. The software design artefacts including: Analysis of System and Software requirements; System specification; Internal and external interface definition; Identifying and managing technical risk; Sell-off of product requirements. Following and supporting the DevSecOps approach to development including: Coordinating the design activity across component design and architectural features; Identifying which elements of the design are being brought into the next Sprint(s) and ensuring that there is sufficient maturity in the design; Ensuring the system and software design integrity and safety meets the required maturity and quality for the FTEWA TDP product. Technical assurance of engineering outputs, including detailed designs, interface specifications and qualification evidence. Your skills and experiences: Essential: System and Software Design Ability to manage complex technical issues and make engineering judgements based on own knowledge and experience Hands-on knowledge of Enterprise Architect Experience of operating within the Agile software development methodology (DevSecOps) Experience of the Azure cloud computing environment Knowledge and experience of: Requirements Analysis, Configuration Management, Human Factors, Interface Analysis, Performance Analysis, Product Safety Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Naval Ships Combat Systems FTEWA TDP team: The BAE Systems Naval Ships Combat Systems FTEWA TDP Team (Force Threat Evaluation & Weapon Assignment, Technical Demonstrator Programme) use cutting edge technologies to design, develop, integrate and support naval combat system products that enable navies to protect nations. The team contributes to the Naval Ships core product, the Combat Management System, is the 'brains' of the ship, allowing crews to understand the tactical situation and to rapidly respond to potentially life-threatening situations. This role will help to ensure that naval crews around the world can continue to receive and utilise the most modern capabilities possible in a challenging and ever-changing environment. We offer significant opportunities for committed employees to learn and develop with us. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 23rd January 2026 - Interviews will take place w/c 2nd February 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior Product Compliance Engineer Location: Barrow-in-Furness, Brough, Filton, Frimley, Portsmouth, Weymouth or Manchester - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Attending and reporting to Daily Stand-Up Meetings (DSUM) Design activities including but not limited to supporting rick reduction/ analysis and identification Applying a systems engineering approach to safety products including Working within a centralised modelling tool Working within a small safety team environment Supporting non-safety experienced member of the wider team to achieve desirable safety outcomes Supporting and preparing safety assessments as required to support system design and development Supporting the preparation of Design Safety Justification supporting inputs Providing Safety SME to product design and gate reviews Supporting the development and maintenance of a healthy product Safety Culture within the team and wider business Your skills and experiences: STEM degree (ideally with Product Safety experience within a regulated industry) Familiarity with UK Defence Standard and publications such as Defence Standard 00-56, Defence Standard 00-55, DSA-01, DSA-02 Familiarity with safety analysis techniques such as: (FHA) (FTA) (ETA) (FMEA) (STPA) An understanding of the principles and requirements of IEC 61508 and/or IEC 61511 for complex Software and Hardware Safety Instrumented Systems Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Safety Environmental team: As the Senior Engineer - Product Safety the primary duties for this role will be heavily focussed on the safety during the product design process. You will undertake analysis and provide outputs to the Principal Engineers where they can provide assistance to develop designs further. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 22nd January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 10, 2026
Full time
Job Title: Senior Product Compliance Engineer Location: Barrow-in-Furness, Brough, Filton, Frimley, Portsmouth, Weymouth or Manchester - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Attending and reporting to Daily Stand-Up Meetings (DSUM) Design activities including but not limited to supporting rick reduction/ analysis and identification Applying a systems engineering approach to safety products including Working within a centralised modelling tool Working within a small safety team environment Supporting non-safety experienced member of the wider team to achieve desirable safety outcomes Supporting and preparing safety assessments as required to support system design and development Supporting the preparation of Design Safety Justification supporting inputs Providing Safety SME to product design and gate reviews Supporting the development and maintenance of a healthy product Safety Culture within the team and wider business Your skills and experiences: STEM degree (ideally with Product Safety experience within a regulated industry) Familiarity with UK Defence Standard and publications such as Defence Standard 00-56, Defence Standard 00-55, DSA-01, DSA-02 Familiarity with safety analysis techniques such as: (FHA) (FTA) (ETA) (FMEA) (STPA) An understanding of the principles and requirements of IEC 61508 and/or IEC 61511 for complex Software and Hardware Safety Instrumented Systems Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Safety Environmental team: As the Senior Engineer - Product Safety the primary duties for this role will be heavily focussed on the safety during the product design process. You will undertake analysis and provide outputs to the Principal Engineers where they can provide assistance to develop designs further. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 22nd January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior Product Compliance Engineer Location: Barrow-in-Furness, Brough, Filton, Frimley, Portsmouth, Weymouth or Manchester - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Attending and reporting to Daily Stand-Up Meetings (DSUM) Design activities including but not limited to supporting rick reduction/ analysis and identification Applying a systems engineering approach to safety products including Working within a centralised modelling tool Working within a small safety team environment Supporting non-safety experienced member of the wider team to achieve desirable safety outcomes Supporting and preparing safety assessments as required to support system design and development Supporting the preparation of Design Safety Justification supporting inputs Providing Safety SME to product design and gate reviews Supporting the development and maintenance of a healthy product Safety Culture within the team and wider business Your skills and experiences: STEM degree (ideally with Product Safety experience within a regulated industry) Familiarity with UK Defence Standard and publications such as Defence Standard 00-56, Defence Standard 00-55, DSA-01, DSA-02 Familiarity with safety analysis techniques such as: (FHA) (FTA) (ETA) (FMEA) (STPA) An understanding of the principles and requirements of IEC 61508 and/or IEC 61511 for complex Software and Hardware Safety Instrumented Systems Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Safety Environmental team: As the Senior Engineer - Product Safety the primary duties for this role will be heavily focussed on the safety during the product design process. You will undertake analysis and provide outputs to the Principal Engineers where they can provide assistance to develop designs further. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 22nd January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 10, 2026
Full time
Job Title: Senior Product Compliance Engineer Location: Barrow-in-Furness, Brough, Filton, Frimley, Portsmouth, Weymouth or Manchester - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Attending and reporting to Daily Stand-Up Meetings (DSUM) Design activities including but not limited to supporting rick reduction/ analysis and identification Applying a systems engineering approach to safety products including Working within a centralised modelling tool Working within a small safety team environment Supporting non-safety experienced member of the wider team to achieve desirable safety outcomes Supporting and preparing safety assessments as required to support system design and development Supporting the preparation of Design Safety Justification supporting inputs Providing Safety SME to product design and gate reviews Supporting the development and maintenance of a healthy product Safety Culture within the team and wider business Your skills and experiences: STEM degree (ideally with Product Safety experience within a regulated industry) Familiarity with UK Defence Standard and publications such as Defence Standard 00-56, Defence Standard 00-55, DSA-01, DSA-02 Familiarity with safety analysis techniques such as: (FHA) (FTA) (ETA) (FMEA) (STPA) An understanding of the principles and requirements of IEC 61508 and/or IEC 61511 for complex Software and Hardware Safety Instrumented Systems Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Safety Environmental team: As the Senior Engineer - Product Safety the primary duties for this role will be heavily focussed on the safety during the product design process. You will undertake analysis and provide outputs to the Principal Engineers where they can provide assistance to develop designs further. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 22nd January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior Product Compliance Engineer Location: Barrow-in-Furness, Brough, Filton, Frimley, Portsmouth, Weymouth or Manchester - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Attending and reporting to Daily Stand-Up Meetings (DSUM) Design activities including but not limited to supporting rick reduction/ analysis and identification Applying a systems engineering approach to safety products including Working within a centralised modelling tool Working within a small safety team environment Supporting non-safety experienced member of the wider team to achieve desirable safety outcomes Supporting and preparing safety assessments as required to support system design and development Supporting the preparation of Design Safety Justification supporting inputs Providing Safety SME to product design and gate reviews Supporting the development and maintenance of a healthy product Safety Culture within the team and wider business Your skills and experiences: STEM degree (ideally with Product Safety experience within a regulated industry) Familiarity with UK Defence Standard and publications such as Defence Standard 00-56, Defence Standard 00-55, DSA-01, DSA-02 Familiarity with safety analysis techniques such as: (FHA) (FTA) (ETA) (FMEA) (STPA) An understanding of the principles and requirements of IEC 61508 and/or IEC 61511 for complex Software and Hardware Safety Instrumented Systems Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Safety Environmental team: As the Senior Engineer - Product Safety the primary duties for this role will be heavily focussed on the safety during the product design process. You will undertake analysis and provide outputs to the Principal Engineers where they can provide assistance to develop designs further. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 22nd January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 10, 2026
Full time
Job Title: Senior Product Compliance Engineer Location: Barrow-in-Furness, Brough, Filton, Frimley, Portsmouth, Weymouth or Manchester - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Negotiable, depending on experience What you'll be doing: Attending and reporting to Daily Stand-Up Meetings (DSUM) Design activities including but not limited to supporting rick reduction/ analysis and identification Applying a systems engineering approach to safety products including Working within a centralised modelling tool Working within a small safety team environment Supporting non-safety experienced member of the wider team to achieve desirable safety outcomes Supporting and preparing safety assessments as required to support system design and development Supporting the preparation of Design Safety Justification supporting inputs Providing Safety SME to product design and gate reviews Supporting the development and maintenance of a healthy product Safety Culture within the team and wider business Your skills and experiences: STEM degree (ideally with Product Safety experience within a regulated industry) Familiarity with UK Defence Standard and publications such as Defence Standard 00-56, Defence Standard 00-55, DSA-01, DSA-02 Familiarity with safety analysis techniques such as: (FHA) (FTA) (ETA) (FMEA) (STPA) An understanding of the principles and requirements of IEC 61508 and/or IEC 61511 for complex Software and Hardware Safety Instrumented Systems Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Safety Environmental team: As the Senior Engineer - Product Safety the primary duties for this role will be heavily focussed on the safety during the product design process. You will undertake analysis and provide outputs to the Principal Engineers where they can provide assistance to develop designs further. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 22nd January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
The MathWorks, Inc.
Frampton On Severn, Gloucestershire
Job Summary MathWorks has a hybrid work model that enables staff members to split their time between office and home. The hybrid model provides the advantage of having both in-person time with colleagues and flexible at-home life optimizations. Learn More: Step into the forefront of technological innovation as a Principal Consultant Engineer at MathWorks! In this role, you'll use your expertise in MATLAB and Simulink to empower MathWorks' aerospace and defence customers across Europe to develop cutting-edge model-based design solutions to address engineering challenges. You'll be key to our customers' success, ensuring the adoption, application, and evolution of MathWorks technology. Join us in shaping the future, working alongside a diverse team of professionals dedicated to advancing our customers' ambitions and driving technological excellence. Learn more about our worldwide team, the work we do, and the impacts on our customers and our office in Cambridge. A MathWorks Consultant has a unique combination of skills and abilities including: Understanding customers' engineering challenges and development processes Designing, implementing and explaining solutions to meet customers' requirements Managing multiple projects concurrently Establishing and maintaining strong technical relationships with key customers Learning new software tools and technologies and building deep technical expertise MathWorks nurtures growth, appreciates diversity, encourages initiative, values teamwork, shares success, and rewards excellence. Responsibilities Make our major aerospace and defence customers in Europe successful in using the Simulink family of products for simulation, model-based design and the development of embedded software. Work hands-on with our customers to overcome difficult research and technical challenges, improve performance and product quality, and reduce development time. Deliver high quality coaching, advisory and implementation services on the use of MATLAB and Simulink. Work with sales and marketing to articulate the value of model-based design, and create tools, adoption and implementation plans. Manage requirements gathering, scoping and estimation, customer interaction and delivery of consulting projects. Work autonomously or as part of a wider team of consultants, application engineers, and developers to ensure customer success and adoption. Collaborate with MathWorks' product development teams to influence the next generation of engineering and scientific tools. Qualifications A bachelor's degree and 6 years of professional work experience (or a master's degree and 3 years of professional work experience, or a PhD degree, or equivalent experience) is required. Additional Qualifications Expertise with Simulink and Model-Based Design Expertise in mathematical and first-principles modelling and simulation of physical systems and control laws Software development in C or C++ for real-time and embedded applications In addition, experience in the following areas would be advantageous: Development of software tools for engineering and/or scientific applications Technical consulting and project management Software certification processes and standards such as DO 178C, ARP 4574
Jan 10, 2026
Full time
Job Summary MathWorks has a hybrid work model that enables staff members to split their time between office and home. The hybrid model provides the advantage of having both in-person time with colleagues and flexible at-home life optimizations. Learn More: Step into the forefront of technological innovation as a Principal Consultant Engineer at MathWorks! In this role, you'll use your expertise in MATLAB and Simulink to empower MathWorks' aerospace and defence customers across Europe to develop cutting-edge model-based design solutions to address engineering challenges. You'll be key to our customers' success, ensuring the adoption, application, and evolution of MathWorks technology. Join us in shaping the future, working alongside a diverse team of professionals dedicated to advancing our customers' ambitions and driving technological excellence. Learn more about our worldwide team, the work we do, and the impacts on our customers and our office in Cambridge. A MathWorks Consultant has a unique combination of skills and abilities including: Understanding customers' engineering challenges and development processes Designing, implementing and explaining solutions to meet customers' requirements Managing multiple projects concurrently Establishing and maintaining strong technical relationships with key customers Learning new software tools and technologies and building deep technical expertise MathWorks nurtures growth, appreciates diversity, encourages initiative, values teamwork, shares success, and rewards excellence. Responsibilities Make our major aerospace and defence customers in Europe successful in using the Simulink family of products for simulation, model-based design and the development of embedded software. Work hands-on with our customers to overcome difficult research and technical challenges, improve performance and product quality, and reduce development time. Deliver high quality coaching, advisory and implementation services on the use of MATLAB and Simulink. Work with sales and marketing to articulate the value of model-based design, and create tools, adoption and implementation plans. Manage requirements gathering, scoping and estimation, customer interaction and delivery of consulting projects. Work autonomously or as part of a wider team of consultants, application engineers, and developers to ensure customer success and adoption. Collaborate with MathWorks' product development teams to influence the next generation of engineering and scientific tools. Qualifications A bachelor's degree and 6 years of professional work experience (or a master's degree and 3 years of professional work experience, or a PhD degree, or equivalent experience) is required. Additional Qualifications Expertise with Simulink and Model-Based Design Expertise in mathematical and first-principles modelling and simulation of physical systems and control laws Software development in C or C++ for real-time and embedded applications In addition, experience in the following areas would be advantageous: Development of software tools for engineering and/or scientific applications Technical consulting and project management Software certification processes and standards such as DO 178C, ARP 4574
LTM Recruitment Specialists Ltd
Newcastle Upon Tyne, Tyne And Wear
My client, one of the best companies in their sector is an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking for a experienced Senior or Principal Mechanical Engineer to be based in our Newcastle office with the ability to inspire others. You will have the ability to run medium sized projects, undertake a client facing role in the development, design and co-ordination of engineering projects. Skills should include experience on data centre and mission critical projects. Other sector experience including commercial, hotel, retail and hotel design desirable. Experience will also include the coordination of engineering project services, with a proven track record in project management. Your excellent communication and interpersonal skills, both with colleagues and clients, and experience working on innovative projects with leading client organisations, and contractors will equip you to take a future pro-active role in forging client relationships of our sector portfolio. You will possess good commercial awareness, in addition to having robust technical knowledge relevant to building services design, and capable of incorporating those technologies into the hotel and leisure sector. The position will ideally suit someone who is currently working in building service consultancy and is prepared to work hands on . The ideal candidate will be a Chartered Engineer or working towards, educated to degree level in Building Services Engineering or equivalent with a minimum of 5 years industry experience. Role Responsibilities • Responsible for running of medium size projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical installations, systems, equipment, facilities etc. • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys tests and reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Carries out engineering calculations to ensure drawings meet required robust industry and legal standards • Responsible for technical content and accuracy of Trainee, Graduates and Engineers • Validation and checking of designs and specifications Specific Skills & Knowledge • BEng, MSc, and have sufficient experience • MCIBSE/MIEE or HNC/HND + appropriate experience or equivalent • Working towards Chartered Eng status • Competent in specification design/drawing for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards • Ability to prioritise own workload • Ability to work to deadlines • Managerial Skills
Jan 10, 2026
Full time
My client, one of the best companies in their sector is an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking for a experienced Senior or Principal Mechanical Engineer to be based in our Newcastle office with the ability to inspire others. You will have the ability to run medium sized projects, undertake a client facing role in the development, design and co-ordination of engineering projects. Skills should include experience on data centre and mission critical projects. Other sector experience including commercial, hotel, retail and hotel design desirable. Experience will also include the coordination of engineering project services, with a proven track record in project management. Your excellent communication and interpersonal skills, both with colleagues and clients, and experience working on innovative projects with leading client organisations, and contractors will equip you to take a future pro-active role in forging client relationships of our sector portfolio. You will possess good commercial awareness, in addition to having robust technical knowledge relevant to building services design, and capable of incorporating those technologies into the hotel and leisure sector. The position will ideally suit someone who is currently working in building service consultancy and is prepared to work hands on . The ideal candidate will be a Chartered Engineer or working towards, educated to degree level in Building Services Engineering or equivalent with a minimum of 5 years industry experience. Role Responsibilities • Responsible for running of medium size projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical installations, systems, equipment, facilities etc. • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys tests and reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Carries out engineering calculations to ensure drawings meet required robust industry and legal standards • Responsible for technical content and accuracy of Trainee, Graduates and Engineers • Validation and checking of designs and specifications Specific Skills & Knowledge • BEng, MSc, and have sufficient experience • MCIBSE/MIEE or HNC/HND + appropriate experience or equivalent • Working towards Chartered Eng status • Competent in specification design/drawing for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards • Ability to prioritise own workload • Ability to work to deadlines • Managerial Skills
LTM Recruitment Specialists Ltd
Newcastle Upon Tyne, Tyne And Wear
My client, arguably one of the best companies in the sector, are an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking to employ an experienced Senior / Principal Engineer to be based in our NE office. You will have experience in the delivery of European data centres and mission-critical projects, along with other sector experience including process pharmaceutical, healthcare, commercial, labs and/or clean rooms would be desirable. Role Responsibilities • Responsible for the running of large projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical or Electrical installations, systems, equipment, facilities etc. (Several building types) • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys, tests, carries out dilapidation reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Ensures engineering calculations and drawings meet required robust industry and legal standards • Leads on the coordination of engineering services • Takes a holistic view in the selection and application of engineering concepts and solutions Role Requirements You will need to possess the following professional and technical expertise: • BSc/BEng or degree in appropriate engineering discipline or have sufficient equivalent experience • MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent • Working towards Chartered Eng status • Significant experience of specification design for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards/ UK Regulations/Codes • Ability to prioritise own workload • Ability to work to deadlines • Managerial skills • Presentation skills • Support the delivery of projects in accordance with the expectations of the Project Delivery Process from a Project Management, Financial Management, QA/QC and Technical Review perspective.
Jan 10, 2026
Full time
My client, arguably one of the best companies in the sector, are an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients. They are looking to employ an experienced Senior / Principal Engineer to be based in our NE office. You will have experience in the delivery of European data centres and mission-critical projects, along with other sector experience including process pharmaceutical, healthcare, commercial, labs and/or clean rooms would be desirable. Role Responsibilities • Responsible for the running of large projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Mechanical or Electrical installations, systems, equipment, facilities etc. (Several building types) • Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes • Surveys, tests, carries out dilapidation reports on existing electrical/mechanical installations • Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements • Day to day decision making on project progress and direct liaison with and provides advice to client • Represents Company at technical meetings with customers, professional teams and contractors teams • Ensures engineering calculations and drawings meet required robust industry and legal standards • Leads on the coordination of engineering services • Takes a holistic view in the selection and application of engineering concepts and solutions Role Requirements You will need to possess the following professional and technical expertise: • BSc/BEng or degree in appropriate engineering discipline or have sufficient equivalent experience • MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent • Working towards Chartered Eng status • Significant experience of specification design for several building types • Sound knowledge of key Health and Safety issues and legislation • Knowledge of MS Office applications word, excel etc • Ability to use IT based calculation and spreadsheet software • Good understanding of BS standards/ UK Regulations/Codes • Ability to prioritise own workload • Ability to work to deadlines • Managerial skills • Presentation skills • Support the delivery of projects in accordance with the expectations of the Project Delivery Process from a Project Management, Financial Management, QA/QC and Technical Review perspective.
Job Title: Principal/Senior Engineer - Structural (Shock & Dynamics) Location: Barrow in Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Up to £57,500 What you'll be doing: Lead the development of the functional requirements and supporting V&V evidence for secondary structures to support design justification documentation set Oversee the spatial design and drawing outputs for secondary structures in accordance with process instructions and standard design guidance Follow internal procedures and develop evidence of compliance through written calculations and reports Undertake structural calculations and (or) peer review checking and approval activities Lead and support the identification and rapid closure of issues emerging from all product lifecycle stages Ensure the appropriate engineering guidance is implemented to ensure robust and efficient calculations are implemented early with a "right first time" mind set Lead technical development and research activities, methods and acceptance criterion, liaising with industrial partners and external customers as necessary Your skills and experiences: Essential: Experience of undertaking structural calculations Understanding the principals of structural mechanics and dynamics Experience of developing structural requirements and V&V evidence Experience in using Finite Element Analysis (FEA) Software Experience in presenting technical arguments clearly and simply Previous experience in checking and approving work Desirable Knowledge of Abaqus FEA and Simcenter or willingness to learn Chartered Engineer (or on route to becoming Chartered) Experienced in generating toolset/calculation templates Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Secondary Structures Department: Join the newly established Secondary Structures Department, a dynamic and forward-thinking team at the forefront of submarine structural engineering. As part of this innovative group, you will play a critical role in supporting structural requirements and conducting complex simulations of internal submarine structures. Your expertise will help safeguard essential equipment against naval shock events and various load conditions, ensuring optimal performance and durability. Beyond technical excellence, this team thrives on collaboration, providing structural design guidance to both internal and external stakeholders during key design reviews. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th Janaury 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 10, 2026
Full time
Job Title: Principal/Senior Engineer - Structural (Shock & Dynamics) Location: Barrow in Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Up to £57,500 What you'll be doing: Lead the development of the functional requirements and supporting V&V evidence for secondary structures to support design justification documentation set Oversee the spatial design and drawing outputs for secondary structures in accordance with process instructions and standard design guidance Follow internal procedures and develop evidence of compliance through written calculations and reports Undertake structural calculations and (or) peer review checking and approval activities Lead and support the identification and rapid closure of issues emerging from all product lifecycle stages Ensure the appropriate engineering guidance is implemented to ensure robust and efficient calculations are implemented early with a "right first time" mind set Lead technical development and research activities, methods and acceptance criterion, liaising with industrial partners and external customers as necessary Your skills and experiences: Essential: Experience of undertaking structural calculations Understanding the principals of structural mechanics and dynamics Experience of developing structural requirements and V&V evidence Experience in using Finite Element Analysis (FEA) Software Experience in presenting technical arguments clearly and simply Previous experience in checking and approving work Desirable Knowledge of Abaqus FEA and Simcenter or willingness to learn Chartered Engineer (or on route to becoming Chartered) Experienced in generating toolset/calculation templates Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Secondary Structures Department: Join the newly established Secondary Structures Department, a dynamic and forward-thinking team at the forefront of submarine structural engineering. As part of this innovative group, you will play a critical role in supporting structural requirements and conducting complex simulations of internal submarine structures. Your expertise will help safeguard essential equipment against naval shock events and various load conditions, ensuring optimal performance and durability. Beyond technical excellence, this team thrives on collaboration, providing structural design guidance to both internal and external stakeholders during key design reviews. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th Janaury 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Principal Process Engineer Contract Location: West Wales This is an excellent opportunity to join a leading engineering business during a period of continued growth as they support the Oil & Gas, Petrochemical and Renewable Energy sectors. Our client requires a minimum of 3 days per week to be based in their offices in West Wales . This role is deemed outside IR35. Role & Responsibilities Responsible for developing f easibility studies and FEED deliverables for downstream projects. Develop the scope of work / basis of design for studies and projects. Development and checking of process calculations. Preparation and checking of process deliverables PFDs, P&IDs, datasheets, specifications, process descriptions, philosophies and narratives. Supporting safety related calculations reviews What If, Hazop SIL Assessment, etc. Utilise process simulation software as required for the development of process deliverables. Attend in-house and site-based meetings / reviews with clients. Undertake short and long-term business travel in support of studies, projects and consultancy. Key Skills & Knowledge Degree in Chemical Engineering essential, chartered status desired but not essential. Must have experience developing f easibility studies and FEED deliverables for downstream projects. Previously worked on design projects in the Oil & Gas, Petrochem, or Renewable Energy industries. Experience in relevant design standards and protocols. Previous site experience in conjunction with a design background beneficial. Benefits This role is deemed outside IR35.
Jan 10, 2026
Contractor
Principal Process Engineer Contract Location: West Wales This is an excellent opportunity to join a leading engineering business during a period of continued growth as they support the Oil & Gas, Petrochemical and Renewable Energy sectors. Our client requires a minimum of 3 days per week to be based in their offices in West Wales . This role is deemed outside IR35. Role & Responsibilities Responsible for developing f easibility studies and FEED deliverables for downstream projects. Develop the scope of work / basis of design for studies and projects. Development and checking of process calculations. Preparation and checking of process deliverables PFDs, P&IDs, datasheets, specifications, process descriptions, philosophies and narratives. Supporting safety related calculations reviews What If, Hazop SIL Assessment, etc. Utilise process simulation software as required for the development of process deliverables. Attend in-house and site-based meetings / reviews with clients. Undertake short and long-term business travel in support of studies, projects and consultancy. Key Skills & Knowledge Degree in Chemical Engineering essential, chartered status desired but not essential. Must have experience developing f easibility studies and FEED deliverables for downstream projects. Previously worked on design projects in the Oil & Gas, Petrochem, or Renewable Energy industries. Experience in relevant design standards and protocols. Previous site experience in conjunction with a design background beneficial. Benefits This role is deemed outside IR35.
# Senior Principal Information Science Consultant # Senior Principal Information Science Consultant Remote TypeRemote LocationUnited Kingdom Job CategoryConsulting Job SummaryWe are Progress (Nasdaq: PRGS) - the trusted provider of software that enables our customers to develop, deploy and manage responsible, AI-powered applications and experiences with agility and ease. We're proud to have a diverse, global team where we value the individual and enrich our culture by considering varied perspectives because we believe people power progress. Join us as a Senior Principal Information Science Consultant and help us do what we do best: propelling business forward. This will be a remote role working out of your home office in the UK, and focused in our Progress Data Platform group. Progress Software is a publicly held company building products that impact millions of people every day. Across the globe, Progress technology has been used to discover new medicines, run the world's financial systems, prevent terrorism, and much more. Our primary product is a highly differentiated data management platform that helps our customers on their journey to get more value out of their enterprise data. We enable organizations to integrate all their data and metadata, power transactional and analytical applications, and curate data for machine learning and AI. To learn more visit . The Senior Principal Information Science Consultant for Progress Semaphore is a client facing knowledge management expert and trusted advisor who helps customers design and evolve high value Semaphore solutions that address complex information, metadata, and knowledge model (i.e. thesauri, taxonomy and ontology) challenges. The role emphasizes deep discovery, collaborative problem solving, and long-term partnership rather than transactional engagements, ensuring customers realize sustained value from the Semaphore platform across their organizations. In this role, you will: Lead in-depth discovery to understand customers' business objectives, information ecosystems, and pain points, and translate them into clear problem statements and opportunity areas for Semaphore. Facilitate workshops and advisory sessions that guide customers through options, tradeoffs, and roadmaps for semantic modeling, taxonomy/ontology design, metadata standards and governance, and content classification. Act as a trusted advisor to business and technical stakeholders, using active listening, open-ended questioning, and data driven insight to create solutions rather than prescribe products. Define and oversee the design of thesauri, ontologies, taxonomies, and knowledge models that underpin customer use cases, ensuring alignment with long-term business and technology strategies. Develop complex classification strategies that leverage organization's knowledge models. Provide strategic guidance on how Semaphore integrates into the broader application, search, analytics, and AI landscape, including change management and adoption considerations. Lead complex client engagements as the senior consultant, ensuring quality of deliverables, alignment to outcomes, and clear communication with executive sponsors and steering groups. Mentor and coach other consultants in consultative methods (e.g., discovery techniques, facilitation, stakeholder management) and in advanced information science practices. Contribute to thought leadership and best practice assets (frameworks, templates, playbooks) that help standardize a consultative, value focused approach across Semaphore services. Your background: 8-10+ years of experience in information science, knowledge management, knowledge engineering, information architecture, or related discipline, including substantial time in consulting or advisory roles. Knowledge of W3C semantic standards - such as RDF, SKOS, SKOS-XL, OWL, SHACL and SPARQL. Demonstrated success using a consultative approach with enterprise customers: leading discovery, facilitating workshops, building mutual success plans, and guiding stakeholders through complex decisions. Deep hands-on experience with semantic technologies, taxonomies, ontologies, and metadata management; experience with Semaphore or similar platforms strongly preferred. Proven ability to operate as a senior or principal level advisor on complex, multistakeholder programs, including engaging at executive level and influencing direction without direct authority. Excellent communication, facilitation, and storytelling skills, with the ability to connect information science and technical topics to business outcomes and strategic priorities. Due to being in our Federal team, US Citizenship is required. Additionally, it would be beneficial if you have: Experience with text analytics and rule-based auto-tagging systems. Practical experience working with REST-based APIs. Experience in knowledge intensive, highly regulated, or content rich industries where metadata, governance, and findability are critical. Background working with cross functional teams (e.g., Product, Customer Success, Architecture, Data/AI) to shape roadmaps and long-term account strategies. Familiarity with consultative frameworks from customer success, management consulting, or design thinking (e.g., discovery, journey mapping, mutual success planning) and applying them in information centric programs. If this sounds like you and fits your experience and career goals, we'd be happy to chat. What we offer in return is the opportunity to experience a great company culture with wonderful colleagues to learn from and collaborate with and also to enjoy: Compensation : Competitive salary, bonus, and best-in-class Employee Stock Purchase Program (ESPP) with a 27-month lookback. Benefits : Premium Collective Health Insurance Plan with a monthly employer contribution and Premium Collective Pension Scheme fully funded by Progress Time-off and Leave : Generous vacation allowance, an additional day off for your birthday, and days off for volunteering Well-being : A global well-being program focused on physical, mental, and financial health. Focus on Employee Experience : We aim to create an environment where people view their time at Progress as their best career chapter by seeking your feedback, partnering with you and recognizing and celebrating the moments that matter. Career Growth : We empower you to own your career and personalize your growth with career development tools, internal career mobility, knowledge sharing, and learning opportunities. Apply now!
Jan 10, 2026
Full time
# Senior Principal Information Science Consultant # Senior Principal Information Science Consultant Remote TypeRemote LocationUnited Kingdom Job CategoryConsulting Job SummaryWe are Progress (Nasdaq: PRGS) - the trusted provider of software that enables our customers to develop, deploy and manage responsible, AI-powered applications and experiences with agility and ease. We're proud to have a diverse, global team where we value the individual and enrich our culture by considering varied perspectives because we believe people power progress. Join us as a Senior Principal Information Science Consultant and help us do what we do best: propelling business forward. This will be a remote role working out of your home office in the UK, and focused in our Progress Data Platform group. Progress Software is a publicly held company building products that impact millions of people every day. Across the globe, Progress technology has been used to discover new medicines, run the world's financial systems, prevent terrorism, and much more. Our primary product is a highly differentiated data management platform that helps our customers on their journey to get more value out of their enterprise data. We enable organizations to integrate all their data and metadata, power transactional and analytical applications, and curate data for machine learning and AI. To learn more visit . The Senior Principal Information Science Consultant for Progress Semaphore is a client facing knowledge management expert and trusted advisor who helps customers design and evolve high value Semaphore solutions that address complex information, metadata, and knowledge model (i.e. thesauri, taxonomy and ontology) challenges. The role emphasizes deep discovery, collaborative problem solving, and long-term partnership rather than transactional engagements, ensuring customers realize sustained value from the Semaphore platform across their organizations. In this role, you will: Lead in-depth discovery to understand customers' business objectives, information ecosystems, and pain points, and translate them into clear problem statements and opportunity areas for Semaphore. Facilitate workshops and advisory sessions that guide customers through options, tradeoffs, and roadmaps for semantic modeling, taxonomy/ontology design, metadata standards and governance, and content classification. Act as a trusted advisor to business and technical stakeholders, using active listening, open-ended questioning, and data driven insight to create solutions rather than prescribe products. Define and oversee the design of thesauri, ontologies, taxonomies, and knowledge models that underpin customer use cases, ensuring alignment with long-term business and technology strategies. Develop complex classification strategies that leverage organization's knowledge models. Provide strategic guidance on how Semaphore integrates into the broader application, search, analytics, and AI landscape, including change management and adoption considerations. Lead complex client engagements as the senior consultant, ensuring quality of deliverables, alignment to outcomes, and clear communication with executive sponsors and steering groups. Mentor and coach other consultants in consultative methods (e.g., discovery techniques, facilitation, stakeholder management) and in advanced information science practices. Contribute to thought leadership and best practice assets (frameworks, templates, playbooks) that help standardize a consultative, value focused approach across Semaphore services. Your background: 8-10+ years of experience in information science, knowledge management, knowledge engineering, information architecture, or related discipline, including substantial time in consulting or advisory roles. Knowledge of W3C semantic standards - such as RDF, SKOS, SKOS-XL, OWL, SHACL and SPARQL. Demonstrated success using a consultative approach with enterprise customers: leading discovery, facilitating workshops, building mutual success plans, and guiding stakeholders through complex decisions. Deep hands-on experience with semantic technologies, taxonomies, ontologies, and metadata management; experience with Semaphore or similar platforms strongly preferred. Proven ability to operate as a senior or principal level advisor on complex, multistakeholder programs, including engaging at executive level and influencing direction without direct authority. Excellent communication, facilitation, and storytelling skills, with the ability to connect information science and technical topics to business outcomes and strategic priorities. Due to being in our Federal team, US Citizenship is required. Additionally, it would be beneficial if you have: Experience with text analytics and rule-based auto-tagging systems. Practical experience working with REST-based APIs. Experience in knowledge intensive, highly regulated, or content rich industries where metadata, governance, and findability are critical. Background working with cross functional teams (e.g., Product, Customer Success, Architecture, Data/AI) to shape roadmaps and long-term account strategies. Familiarity with consultative frameworks from customer success, management consulting, or design thinking (e.g., discovery, journey mapping, mutual success planning) and applying them in information centric programs. If this sounds like you and fits your experience and career goals, we'd be happy to chat. What we offer in return is the opportunity to experience a great company culture with wonderful colleagues to learn from and collaborate with and also to enjoy: Compensation : Competitive salary, bonus, and best-in-class Employee Stock Purchase Program (ESPP) with a 27-month lookback. Benefits : Premium Collective Health Insurance Plan with a monthly employer contribution and Premium Collective Pension Scheme fully funded by Progress Time-off and Leave : Generous vacation allowance, an additional day off for your birthday, and days off for volunteering Well-being : A global well-being program focused on physical, mental, and financial health. Focus on Employee Experience : We aim to create an environment where people view their time at Progress as their best career chapter by seeking your feedback, partnering with you and recognizing and celebrating the moments that matter. Career Growth : We empower you to own your career and personalize your growth with career development tools, internal career mobility, knowledge sharing, and learning opportunities. Apply now!
This consultancy is an award-winning consulting engineers with decades of experience, vast technical expertise and a friendly, proactive approach that our clients really value. Over the years they've delivered projects of every size, in every sector, with every kind of complexity. Whatever the challenge, from concept to completion, they deliver imaginative, integrated engineering solutions that are rigorously designed, robustly cost effective and reliably buildable. What's on offer: Flexible holiday allowance Company Pension scheme Hybrid working Interesting and challenging projects A chance to be in at the start of a new journey Autonomy to lead your own projects Excellent career progression potential What you need to succeed: UK design consultancy experience across a range of sectors - notably Residential Sound client liaison experience and being commercially aware Experience with Section Agreements 278, 38, 185 and 104 Fully conversant in the use of software such as AutoCAD, Civil3D, WinDes or their equivalents Hands on approach, with a desire to remain engaged in design and project delivery Willingness to grow a Civils team alongside the Regional Director - helping line manage/mentor colleagues Good organisation, communication, and presentation skills You will have 10+ years' experience in the industry and have an aspiration to start a new and exciting chapter in your career
Jan 10, 2026
Full time
This consultancy is an award-winning consulting engineers with decades of experience, vast technical expertise and a friendly, proactive approach that our clients really value. Over the years they've delivered projects of every size, in every sector, with every kind of complexity. Whatever the challenge, from concept to completion, they deliver imaginative, integrated engineering solutions that are rigorously designed, robustly cost effective and reliably buildable. What's on offer: Flexible holiday allowance Company Pension scheme Hybrid working Interesting and challenging projects A chance to be in at the start of a new journey Autonomy to lead your own projects Excellent career progression potential What you need to succeed: UK design consultancy experience across a range of sectors - notably Residential Sound client liaison experience and being commercially aware Experience with Section Agreements 278, 38, 185 and 104 Fully conversant in the use of software such as AutoCAD, Civil3D, WinDes or their equivalents Hands on approach, with a desire to remain engaged in design and project delivery Willingness to grow a Civils team alongside the Regional Director - helping line manage/mentor colleagues Good organisation, communication, and presentation skills You will have 10+ years' experience in the industry and have an aspiration to start a new and exciting chapter in your career
Principal Security Engineer The Role: Synoptix are expanding their Cyber Security capability by applying it to Systems Thinking, allowing for delivery of Cyber Security Solutions to both defence and commercial clients. We re looking for a technically strong, client-focused Principal Security Engineer to support the development, implementation, and assurance of secure system architectures and solutions. This role sits within our Secure by Design capability and supports both internal development projects and external client engagements. Working alongside the existing team, contributing to security requirements definition, risk assessments, technical security design, and security documentation for both internal platforms and client systems. Dynamic Working: A blend of home and office-based working is encouraged Key Responsibilities: Lead and Deliver Cyber Security work packages to clients, this includes applying Systems Engineering methodologies into Cyber solutions. Risk identification and management Requirements Capture Validation Verification Be responsible for the technical content of client deliverables, for example. Security Management Plans Security Case Report following Secure by Design through life principals Verification Plans Validation Test Schedules and Reporting Penetration Test Remedial Action Plans Managing Risk Appetite and Risk Analysis Assessments Support the Sales and Business Development team in winning work through the generation of proposals and support to client meetings. Represent Synoptix at conferences, symposia, and trade shows. Lead Cyber security related research programmes with Academia. Represent the client and Synoptix at both internal and external customer facing security working groups. Delivering Key Management in accordance with agreed management plans. Assist in the further development of the Synoptix Cyber security capability. Skills Required: Essential: Knowledge of Secure by Design principles Experience in system security engineering, ideally in defence, space, or critical infrastructure Familiarity with MOD, NCSC, and ISO standards (e.g. ISO 27001/2, NIST 800-series, JSP 604) Competence in requirements engineering and systems thinking Practical experience with security in software and/or system development environments Effective communication and report-writing skills Ability to work independently as well as collaboratively within multidisciplinary teams Desirable: CISSP, CISM, or relevant NCSC-certified qualifications Experience with model-based systems engineering (MBSE) Experience supporting formal security assurance processes Understanding of space system architectures or satellite communications DevSecOps awareness or experience with security automation Benefits: Annual Company Bonus 25 Days holiday not including bank holidays with the option to buy/sell up to 5 days Competitive pension contribution Continuous professional development including incentives Access to online Udemy training facility Flexible working arrangements Bike to work scheme Electric car scheme Private health care Job well done scheme Please note that due to the nature of our projects we can only accept Sole UK National candidates who will need to be eligible to obtain UK Security Clearance. By applying for this position, you are confirming that you consent to the retention of your personal data. Your data is held securely on our own premises and under the terms of the Data Protection Act (2018). It will be treated as confidential, and will not be transferred to any third party, or to any other jurisdiction without your consent. We will not hold any data for any longer than is necessary for us to fulfil our obligations and will remove any data at your written request.
Jan 09, 2026
Full time
Principal Security Engineer The Role: Synoptix are expanding their Cyber Security capability by applying it to Systems Thinking, allowing for delivery of Cyber Security Solutions to both defence and commercial clients. We re looking for a technically strong, client-focused Principal Security Engineer to support the development, implementation, and assurance of secure system architectures and solutions. This role sits within our Secure by Design capability and supports both internal development projects and external client engagements. Working alongside the existing team, contributing to security requirements definition, risk assessments, technical security design, and security documentation for both internal platforms and client systems. Dynamic Working: A blend of home and office-based working is encouraged Key Responsibilities: Lead and Deliver Cyber Security work packages to clients, this includes applying Systems Engineering methodologies into Cyber solutions. Risk identification and management Requirements Capture Validation Verification Be responsible for the technical content of client deliverables, for example. Security Management Plans Security Case Report following Secure by Design through life principals Verification Plans Validation Test Schedules and Reporting Penetration Test Remedial Action Plans Managing Risk Appetite and Risk Analysis Assessments Support the Sales and Business Development team in winning work through the generation of proposals and support to client meetings. Represent Synoptix at conferences, symposia, and trade shows. Lead Cyber security related research programmes with Academia. Represent the client and Synoptix at both internal and external customer facing security working groups. Delivering Key Management in accordance with agreed management plans. Assist in the further development of the Synoptix Cyber security capability. Skills Required: Essential: Knowledge of Secure by Design principles Experience in system security engineering, ideally in defence, space, or critical infrastructure Familiarity with MOD, NCSC, and ISO standards (e.g. ISO 27001/2, NIST 800-series, JSP 604) Competence in requirements engineering and systems thinking Practical experience with security in software and/or system development environments Effective communication and report-writing skills Ability to work independently as well as collaboratively within multidisciplinary teams Desirable: CISSP, CISM, or relevant NCSC-certified qualifications Experience with model-based systems engineering (MBSE) Experience supporting formal security assurance processes Understanding of space system architectures or satellite communications DevSecOps awareness or experience with security automation Benefits: Annual Company Bonus 25 Days holiday not including bank holidays with the option to buy/sell up to 5 days Competitive pension contribution Continuous professional development including incentives Access to online Udemy training facility Flexible working arrangements Bike to work scheme Electric car scheme Private health care Job well done scheme Please note that due to the nature of our projects we can only accept Sole UK National candidates who will need to be eligible to obtain UK Security Clearance. By applying for this position, you are confirming that you consent to the retention of your personal data. Your data is held securely on our own premises and under the terms of the Data Protection Act (2018). It will be treated as confidential, and will not be transferred to any third party, or to any other jurisdiction without your consent. We will not hold any data for any longer than is necessary for us to fulfil our obligations and will remove any data at your written request.
Tech Lead Opportunity Manchester (1 day on site), £70-£75k Morson Edge have partnered with a leading organisation to recruit a Technical Lead to play a pivotal role in shaping and delivering our clients enterprise-wide integrations. If you re someone who thrives on designing scalable, resilient solutions, and you enjoy coaching teams, this is a role where you ll have real autonomy and impact. This is a key leadership position in a modern software engineering function, combining hands-on technical ownership with people leadership and strategic influence. You ll work across a portfolio of critical services and business systems, helping us drive smarter, more connected, and more automated ways of working. What you ll be doing: You ll take ownership of technical direction across enterprise integration and automation solutions, including: Leading solution design across integrations and RPA initiatives Defining architectural approach and ensuring best-practice engineering standards Performing code reviews and guiding technical quality across the team Championing secure, scalable and resilient integration patterns Driving continuous improvement in tools, processes and delivery methods Evaluating emerging technologies, building business cases and assessing ROI You ll work heavily with modern integration platforms and patterns including Azure services and event-driven approaches and act as the technical authority that supports both delivery and long-term strategy. Essential Experience: Proven background as a senior developer, principal developer or technical lead (3+ years) Experience managing cross-functional delivery teams (developers, analysts and testers) Strong hands-on experience in: C# / .NET REST APIs & SOAP services Enterprise integration patterns and best practices Azure Integration Services (Logic Apps, Functions, Service Bus) Domain-Driven Design (DDD) and Event-Driven Architecture Solid understanding of integration design Knowledge of CI/CD using Azure DevOps and/or GitHub Actions Hands-on RPA experience with UiPath, Blue Prism or NICE If this role sounds of interest please apply to hear more! Please note, this role cannot offer sponsorship at this time.
Jan 09, 2026
Full time
Tech Lead Opportunity Manchester (1 day on site), £70-£75k Morson Edge have partnered with a leading organisation to recruit a Technical Lead to play a pivotal role in shaping and delivering our clients enterprise-wide integrations. If you re someone who thrives on designing scalable, resilient solutions, and you enjoy coaching teams, this is a role where you ll have real autonomy and impact. This is a key leadership position in a modern software engineering function, combining hands-on technical ownership with people leadership and strategic influence. You ll work across a portfolio of critical services and business systems, helping us drive smarter, more connected, and more automated ways of working. What you ll be doing: You ll take ownership of technical direction across enterprise integration and automation solutions, including: Leading solution design across integrations and RPA initiatives Defining architectural approach and ensuring best-practice engineering standards Performing code reviews and guiding technical quality across the team Championing secure, scalable and resilient integration patterns Driving continuous improvement in tools, processes and delivery methods Evaluating emerging technologies, building business cases and assessing ROI You ll work heavily with modern integration platforms and patterns including Azure services and event-driven approaches and act as the technical authority that supports both delivery and long-term strategy. Essential Experience: Proven background as a senior developer, principal developer or technical lead (3+ years) Experience managing cross-functional delivery teams (developers, analysts and testers) Strong hands-on experience in: C# / .NET REST APIs & SOAP services Enterprise integration patterns and best practices Azure Integration Services (Logic Apps, Functions, Service Bus) Domain-Driven Design (DDD) and Event-Driven Architecture Solid understanding of integration design Knowledge of CI/CD using Azure DevOps and/or GitHub Actions Hands-on RPA experience with UiPath, Blue Prism or NICE If this role sounds of interest please apply to hear more! Please note, this role cannot offer sponsorship at this time.
