The postholder is responsible for managing the Estates team to help deliver the corporate aims, objectives and objectives of the Trust. The postholder will provide specialist advice and guidance for estates on technical and compliance matters relating to all aspects of the Trust's Estate. The post-holder will ensure that the Trust's estate complies with Statutory Legislation, Health Technical Memorandum's (HTM's), Codes of Practice and meets patient and service needs. The will manage the EME team and services, as the Trust's Senior Operational Manager, whilst also being competent to line manage the Authorised Person/s, in the areas listed below and as defined within HTM-00 for:- Operational Engineering Management Electrical Services Mechanical Services Building Fabric Maintenance Programmes Sustainability Minor Improvement Works Service / Maintenance Contracts Grounds and Gardens Security Fire Lead on specialist aspects of Estates services, responsible for interpreting legislative requirements on Estates matters. Main duties of the job Manage, monitor and co-ordinate all estates activities with appropriate arrangements in place for the delivery of responsive and effective estates services including 'out of hours' on-call services and emergency contingency plans. Responds to estates emergencies and manages and participates in the 'out of hour' emergency on-call management rota. Manage the Trust's relationship with third party organisations ensuring good working relationships. Responsible to the Associate Director of Estates and Facilities for all delegated matters affecting the control, procurement and management of estates and to undertake deputising duties when required. Undertakes the line management of the estates staff, including the Fire Safety Advisor. Manage resources within the delegated funding for all estate activities, ensuring that all works meet safety standards, statutory compliance and that activities are carried out in the most cost effective and efficient way. Advise the Associate Director of Estates and Facilities on all estates matters and systems concerning any problematic areas, non-compliance with statutory or mandatory regulations and risks to business continuity in respect of the estate. Be capable and share with the Estates Manager the duties of 'Responsible Person' for Legionella as defined in HSE - The Control of Legionella Bacteria in water Systems (L8) - Approved Code of Practice & Guidance and HTM 04-01 the Control of Legionella in Healthcare Premises guidance. About us Rated GOOD overall with outstanding care by the CQC. A specialist NHS hospital providing life-changing reconstructive surgery, burns care and rehabilitation services across the South of England and beyond. We specialise in conditions of the eyes (corneoplastics), hands, head and neck cancer and skin cancer, reconstructive breast surgery, maxillofacial surgery and prosthetics, providing regional and national services in these areas of clinical expertise.Our world-leading clinical teams also treat more common conditions of the eyes, hands, skin, and teeth for the people of East Grinstead and the surrounding areas. In addition, QVH provides a minor injuries unit, expert therapies, a sleep service, and a growing portfolio of community-based services.Patients consistently rate QVH amongst the top hospitals in the country for quality of care. Our success is underpinned by the skills and enthusiasm of our staff and a strong culture of partnership. We are fully committed to training and development of the workforce with support for continuing education and learning. Job responsibilities Management of an effective maintenance, reporting and reporting assurance programme including planned preventative maintenance (PPM) and reactive maintenance for buildings, engineering services and plant maintenance ensuring that an appropriate balance between planned and reactive maintenance is achieved. Management of contracting and tendering procedures ensuring good practice in the letting of contracts for maintenance agreements, specialist plant or equipment maintenance, in conjunction with the procurement team. Develop estates policies, processes and procedures for engineering and building maintenance of the Trusts assets in line with latest legislation and standards in conjunction with Infection Control and Nursing requirements. Responsible for ensuring the development and maintenance of all engineering and estates records including as-fitted drawings, maintenance manuals, service records, statistical returns, Estates Return Information Collection (ERIC), Premises Assurance Model, (PAMs) performance reports, controlled documents, logbooks, policies and procedures. Research and review relevant new technologies, including best practice for integration into existing and new engineering services to ensure they provide cost effectiveness, efficiency and appropriate levels of safety. Monitor estate performance through benchmarking and performance indicators. Provide estates advice on future service and major capital developments. Prepare business cases for the Trusts Capital schemes in relation to reduction of backlog maintenance. Provide estates advice on future service and major capital developments to ensure compliance and maintainability of services. Undertakes plant replacement and system upgrade projects and provides regular reports on progress. Person Specification Application Form, Interview and presentation Degree Building Services or Engineering Experience of running a complex NHS Estate Experience of managing a team IOSH/NEBOSH AP Medical Gas AP Ventilation Financial Management of Budgets Disclosure and Barring Service Check This post is subject to the Rehabilitation of Offenders Act (Exceptions Order) 1975 and as such it will be necessary for a submission for Disclosure to be made to the Disclosure and Barring Service (formerly known as CRB) to check for any previous criminal convictions. £76,965 to £88,682 a yearpa plus on-call rota (1 in 4 weeks at present)
Jan 09, 2026
Full time
The postholder is responsible for managing the Estates team to help deliver the corporate aims, objectives and objectives of the Trust. The postholder will provide specialist advice and guidance for estates on technical and compliance matters relating to all aspects of the Trust's Estate. The post-holder will ensure that the Trust's estate complies with Statutory Legislation, Health Technical Memorandum's (HTM's), Codes of Practice and meets patient and service needs. The will manage the EME team and services, as the Trust's Senior Operational Manager, whilst also being competent to line manage the Authorised Person/s, in the areas listed below and as defined within HTM-00 for:- Operational Engineering Management Electrical Services Mechanical Services Building Fabric Maintenance Programmes Sustainability Minor Improvement Works Service / Maintenance Contracts Grounds and Gardens Security Fire Lead on specialist aspects of Estates services, responsible for interpreting legislative requirements on Estates matters. Main duties of the job Manage, monitor and co-ordinate all estates activities with appropriate arrangements in place for the delivery of responsive and effective estates services including 'out of hours' on-call services and emergency contingency plans. Responds to estates emergencies and manages and participates in the 'out of hour' emergency on-call management rota. Manage the Trust's relationship with third party organisations ensuring good working relationships. Responsible to the Associate Director of Estates and Facilities for all delegated matters affecting the control, procurement and management of estates and to undertake deputising duties when required. Undertakes the line management of the estates staff, including the Fire Safety Advisor. Manage resources within the delegated funding for all estate activities, ensuring that all works meet safety standards, statutory compliance and that activities are carried out in the most cost effective and efficient way. Advise the Associate Director of Estates and Facilities on all estates matters and systems concerning any problematic areas, non-compliance with statutory or mandatory regulations and risks to business continuity in respect of the estate. Be capable and share with the Estates Manager the duties of 'Responsible Person' for Legionella as defined in HSE - The Control of Legionella Bacteria in water Systems (L8) - Approved Code of Practice & Guidance and HTM 04-01 the Control of Legionella in Healthcare Premises guidance. About us Rated GOOD overall with outstanding care by the CQC. A specialist NHS hospital providing life-changing reconstructive surgery, burns care and rehabilitation services across the South of England and beyond. We specialise in conditions of the eyes (corneoplastics), hands, head and neck cancer and skin cancer, reconstructive breast surgery, maxillofacial surgery and prosthetics, providing regional and national services in these areas of clinical expertise.Our world-leading clinical teams also treat more common conditions of the eyes, hands, skin, and teeth for the people of East Grinstead and the surrounding areas. In addition, QVH provides a minor injuries unit, expert therapies, a sleep service, and a growing portfolio of community-based services.Patients consistently rate QVH amongst the top hospitals in the country for quality of care. Our success is underpinned by the skills and enthusiasm of our staff and a strong culture of partnership. We are fully committed to training and development of the workforce with support for continuing education and learning. Job responsibilities Management of an effective maintenance, reporting and reporting assurance programme including planned preventative maintenance (PPM) and reactive maintenance for buildings, engineering services and plant maintenance ensuring that an appropriate balance between planned and reactive maintenance is achieved. Management of contracting and tendering procedures ensuring good practice in the letting of contracts for maintenance agreements, specialist plant or equipment maintenance, in conjunction with the procurement team. Develop estates policies, processes and procedures for engineering and building maintenance of the Trusts assets in line with latest legislation and standards in conjunction with Infection Control and Nursing requirements. Responsible for ensuring the development and maintenance of all engineering and estates records including as-fitted drawings, maintenance manuals, service records, statistical returns, Estates Return Information Collection (ERIC), Premises Assurance Model, (PAMs) performance reports, controlled documents, logbooks, policies and procedures. Research and review relevant new technologies, including best practice for integration into existing and new engineering services to ensure they provide cost effectiveness, efficiency and appropriate levels of safety. Monitor estate performance through benchmarking and performance indicators. Provide estates advice on future service and major capital developments. Prepare business cases for the Trusts Capital schemes in relation to reduction of backlog maintenance. Provide estates advice on future service and major capital developments to ensure compliance and maintainability of services. Undertakes plant replacement and system upgrade projects and provides regular reports on progress. Person Specification Application Form, Interview and presentation Degree Building Services or Engineering Experience of running a complex NHS Estate Experience of managing a team IOSH/NEBOSH AP Medical Gas AP Ventilation Financial Management of Budgets Disclosure and Barring Service Check This post is subject to the Rehabilitation of Offenders Act (Exceptions Order) 1975 and as such it will be necessary for a submission for Disclosure to be made to the Disclosure and Barring Service (formerly known as CRB) to check for any previous criminal convictions. £76,965 to £88,682 a yearpa plus on-call rota (1 in 4 weeks at present)
Project Manager Scotland - Central, Northern and Highlands Permanent Competitive + Car/Car Allowance + Flexible Benefits Summary An opportunity has opened for a Project Manager, within our SSE North Scotland business, to lead a number of small teams installing and constructing electrical power distribution and transmission systems from 11kV to 132kV in a manner that delivers safe, profitable, timely, high workmanship quality and fit for purpose networks for the customer and which promotes the company in a positive light at all times. While performing Project management of their own projects the Project Manager will provide supervision and direction to a number of staff as they provide the management, control and execution of a number of diverse electrical network projects running concurrently. These may include the installation of ground mounted and structure mounted power system components, cable systems, switchgear, transformers, busbars, relay panels and associated equipment in substations operating at up to 132KV. Some of the key deliverables in this role will include: Reporting to the Operations Manager, the project manager will lead multiple project managers and teams and execute duties in a professional manner to build team and customer confidence and thereby contributing to the promotion of Projects Business growth. First line problem solver. Provide the leadership, drive, discipline, and support of the Project Managers and the teams through direction, guidance, advice, support, commitment, effort and dedication as required to direct reports, other team members and customers. To work within all set procedures and to ensure Health and Safety is the most important element in this regard. Undertake the site supervisor role when required, in accordance with the CDM regulations as required - this may include the control of Customer appointed contractors and/or company appointed sub contract labour. Efficiently execute the project management role on a number of projects running concurrently while managing their team of Project Managers. Oversee the tasks and task types allocated to others in a diligent manner in pursuit of effective project delivery. Appraise direct reports regularly in order to develop them, increase skill range, knowledge base and performance in the process. Resource control. Undertake the organisation, control and deployment of materials/equipment/labour resources for upcoming works on a range of projects running concurrently. Good commercial awareness and completion of valuations against a set scope Keep safe and maintain all company property issued, ensure it is routinely PAT or calibration tested and bring to the company's attention any items that are not of a serviceable nature in a timely manner. Production of as built records, test results, updated drawings and reports for projects. What we're looking for : HNC/Degree in Electrical Engineering (and / or time served) Good operational knowledge of electrical power distribution systems. Site safety passport and/or experience of working on CDM sites. SSSTS OR SMSTS is desirable, not essential. Possession of SSE DNO authorisation to receive and cancel PTW (or alternative equivalent DNO authorisation i.e. SPEN, NPg, UKPN). For more information, please apply now with a full CV and salary expectations. Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Car/Car allowance Salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with a leading provider and up to 8% employer contribution 25 days holiday Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Jan 09, 2026
Full time
Project Manager Scotland - Central, Northern and Highlands Permanent Competitive + Car/Car Allowance + Flexible Benefits Summary An opportunity has opened for a Project Manager, within our SSE North Scotland business, to lead a number of small teams installing and constructing electrical power distribution and transmission systems from 11kV to 132kV in a manner that delivers safe, profitable, timely, high workmanship quality and fit for purpose networks for the customer and which promotes the company in a positive light at all times. While performing Project management of their own projects the Project Manager will provide supervision and direction to a number of staff as they provide the management, control and execution of a number of diverse electrical network projects running concurrently. These may include the installation of ground mounted and structure mounted power system components, cable systems, switchgear, transformers, busbars, relay panels and associated equipment in substations operating at up to 132KV. Some of the key deliverables in this role will include: Reporting to the Operations Manager, the project manager will lead multiple project managers and teams and execute duties in a professional manner to build team and customer confidence and thereby contributing to the promotion of Projects Business growth. First line problem solver. Provide the leadership, drive, discipline, and support of the Project Managers and the teams through direction, guidance, advice, support, commitment, effort and dedication as required to direct reports, other team members and customers. To work within all set procedures and to ensure Health and Safety is the most important element in this regard. Undertake the site supervisor role when required, in accordance with the CDM regulations as required - this may include the control of Customer appointed contractors and/or company appointed sub contract labour. Efficiently execute the project management role on a number of projects running concurrently while managing their team of Project Managers. Oversee the tasks and task types allocated to others in a diligent manner in pursuit of effective project delivery. Appraise direct reports regularly in order to develop them, increase skill range, knowledge base and performance in the process. Resource control. Undertake the organisation, control and deployment of materials/equipment/labour resources for upcoming works on a range of projects running concurrently. Good commercial awareness and completion of valuations against a set scope Keep safe and maintain all company property issued, ensure it is routinely PAT or calibration tested and bring to the company's attention any items that are not of a serviceable nature in a timely manner. Production of as built records, test results, updated drawings and reports for projects. What we're looking for : HNC/Degree in Electrical Engineering (and / or time served) Good operational knowledge of electrical power distribution systems. Site safety passport and/or experience of working on CDM sites. SSSTS OR SMSTS is desirable, not essential. Possession of SSE DNO authorisation to receive and cancel PTW (or alternative equivalent DNO authorisation i.e. SPEN, NPg, UKPN). For more information, please apply now with a full CV and salary expectations. Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Car/Car allowance Salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with a leading provider and up to 8% employer contribution 25 days holiday Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Project Manager Scotland - Central, Northern and Highlands Permanent Competitive + Car/Car Allowance + Flexible Benefits Summary An opportunity has opened for a Project Manager, within our SSE North Scotland business, to lead a number of small teams installing and constructing electrical power distribution and transmission systems from 11kV to 132kV in a manner that delivers safe, profitable, timely, high workmanship quality and fit for purpose networks for the customer and which promotes the company in a positive light at all times. While performing Project management of their own projects the Project Manager will provide supervision and direction to a number of staff as they provide the management, control and execution of a number of diverse electrical network projects running concurrently. These may include the installation of ground mounted and structure mounted power system components, cable systems, switchgear, transformers, busbars, relay panels and associated equipment in substations operating at up to 132KV. Some of the key deliverables in this role will include: Reporting to the Operations Manager, the project manager will lead multiple project managers and teams and execute duties in a professional manner to build team and customer confidence and thereby contributing to the promotion of Projects Business growth. First line problem solver. Provide the leadership, drive, discipline, and support of the Project Managers and the teams through direction, guidance, advice, support, commitment, effort and dedication as required to direct reports, other team members and customers. To work within all set procedures and to ensure Health and Safety is the most important element in this regard. Undertake the site supervisor role when required, in accordance with the CDM regulations as required - this may include the control of Customer appointed contractors and/or company appointed sub contract labour. Efficiently execute the project management role on a number of projects running concurrently while managing their team of Project Managers. Oversee the tasks and task types allocated to others in a diligent manner in pursuit of effective project delivery. Appraise direct reports regularly in order to develop them, increase skill range, knowledge base and performance in the process. Resource control. Undertake the organisation, control and deployment of materials/equipment/labour resources for upcoming works on a range of projects running concurrently. Good commercial awareness and completion of valuations against a set scope Keep safe and maintain all company property issued, ensure it is routinely PAT or calibration tested and bring to the company's attention any items that are not of a serviceable nature in a timely manner. Production of as built records, test results, updated drawings and reports for projects. What we're looking for : HNC/Degree in Electrical Engineering (and / or time served) Good operational knowledge of electrical power distribution systems. Site safety passport and/or experience of working on CDM sites. SSSTS OR SMSTS is desirable, not essential. Possession of SSE DNO authorisation to receive and cancel PTW (or alternative equivalent DNO authorisation i.e. SPEN, NPg, UKPN). For more information, please apply now with a full CV and salary expectations. Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Car/Car allowance Salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with a leading provider and up to 8% employer contribution 25 days holiday Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Jan 09, 2026
Full time
Project Manager Scotland - Central, Northern and Highlands Permanent Competitive + Car/Car Allowance + Flexible Benefits Summary An opportunity has opened for a Project Manager, within our SSE North Scotland business, to lead a number of small teams installing and constructing electrical power distribution and transmission systems from 11kV to 132kV in a manner that delivers safe, profitable, timely, high workmanship quality and fit for purpose networks for the customer and which promotes the company in a positive light at all times. While performing Project management of their own projects the Project Manager will provide supervision and direction to a number of staff as they provide the management, control and execution of a number of diverse electrical network projects running concurrently. These may include the installation of ground mounted and structure mounted power system components, cable systems, switchgear, transformers, busbars, relay panels and associated equipment in substations operating at up to 132KV. Some of the key deliverables in this role will include: Reporting to the Operations Manager, the project manager will lead multiple project managers and teams and execute duties in a professional manner to build team and customer confidence and thereby contributing to the promotion of Projects Business growth. First line problem solver. Provide the leadership, drive, discipline, and support of the Project Managers and the teams through direction, guidance, advice, support, commitment, effort and dedication as required to direct reports, other team members and customers. To work within all set procedures and to ensure Health and Safety is the most important element in this regard. Undertake the site supervisor role when required, in accordance with the CDM regulations as required - this may include the control of Customer appointed contractors and/or company appointed sub contract labour. Efficiently execute the project management role on a number of projects running concurrently while managing their team of Project Managers. Oversee the tasks and task types allocated to others in a diligent manner in pursuit of effective project delivery. Appraise direct reports regularly in order to develop them, increase skill range, knowledge base and performance in the process. Resource control. Undertake the organisation, control and deployment of materials/equipment/labour resources for upcoming works on a range of projects running concurrently. Good commercial awareness and completion of valuations against a set scope Keep safe and maintain all company property issued, ensure it is routinely PAT or calibration tested and bring to the company's attention any items that are not of a serviceable nature in a timely manner. Production of as built records, test results, updated drawings and reports for projects. What we're looking for : HNC/Degree in Electrical Engineering (and / or time served) Good operational knowledge of electrical power distribution systems. Site safety passport and/or experience of working on CDM sites. SSSTS OR SMSTS is desirable, not essential. Possession of SSE DNO authorisation to receive and cancel PTW (or alternative equivalent DNO authorisation i.e. SPEN, NPg, UKPN). For more information, please apply now with a full CV and salary expectations. Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Car/Car allowance Salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with a leading provider and up to 8% employer contribution 25 days holiday Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Project Manager Scotland - Central, Northern and Highlands Permanent Competitive + Car/Car Allowance + Flexible Benefits Summary An opportunity has opened for a Project Manager, within our SSE North Scotland business, to lead a number of small teams installing and constructing electrical power distribution and transmission systems from 11kV to 132kV in a manner that delivers safe, profitable, timely, high workmanship quality and fit for purpose networks for the customer and which promotes the company in a positive light at all times. While performing Project management of their own projects the Project Manager will provide supervision and direction to a number of staff as they provide the management, control and execution of a number of diverse electrical network projects running concurrently. These may include the installation of ground mounted and structure mounted power system components, cable systems, switchgear, transformers, busbars, relay panels and associated equipment in substations operating at up to 132KV. Some of the key deliverables in this role will include: Reporting to the Operations Manager, the project manager will lead multiple project managers and teams and execute duties in a professional manner to build team and customer confidence and thereby contributing to the promotion of Projects Business growth. First line problem solver. Provide the leadership, drive, discipline, and support of the Project Managers and the teams through direction, guidance, advice, support, commitment, effort and dedication as required to direct reports, other team members and customers. To work within all set procedures and to ensure Health and Safety is the most important element in this regard. Undertake the site supervisor role when required, in accordance with the CDM regulations as required - this may include the control of Customer appointed contractors and/or company appointed sub contract labour. Efficiently execute the project management role on a number of projects running concurrently while managing their team of Project Managers. Oversee the tasks and task types allocated to others in a diligent manner in pursuit of effective project delivery. Appraise direct reports regularly in order to develop them, increase skill range, knowledge base and performance in the process. Resource control. Undertake the organisation, control and deployment of materials/equipment/labour resources for upcoming works on a range of projects running concurrently. Good commercial awareness and completion of valuations against a set scope Keep safe and maintain all company property issued, ensure it is routinely PAT or calibration tested and bring to the company's attention any items that are not of a serviceable nature in a timely manner. Production of as built records, test results, updated drawings and reports for projects. What we're looking for : HNC/Degree in Electrical Engineering (and / or time served) Good operational knowledge of electrical power distribution systems. Site safety passport and/or experience of working on CDM sites. SSSTS OR SMSTS is desirable, not essential. Possession of SSE DNO authorisation to receive and cancel PTW (or alternative equivalent DNO authorisation i.e. SPEN, NPg, UKPN). For more information, please apply now with a full CV and salary expectations. Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Car/Car allowance Salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with a leading provider and up to 8% employer contribution 25 days holiday Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Jan 09, 2026
Full time
Project Manager Scotland - Central, Northern and Highlands Permanent Competitive + Car/Car Allowance + Flexible Benefits Summary An opportunity has opened for a Project Manager, within our SSE North Scotland business, to lead a number of small teams installing and constructing electrical power distribution and transmission systems from 11kV to 132kV in a manner that delivers safe, profitable, timely, high workmanship quality and fit for purpose networks for the customer and which promotes the company in a positive light at all times. While performing Project management of their own projects the Project Manager will provide supervision and direction to a number of staff as they provide the management, control and execution of a number of diverse electrical network projects running concurrently. These may include the installation of ground mounted and structure mounted power system components, cable systems, switchgear, transformers, busbars, relay panels and associated equipment in substations operating at up to 132KV. Some of the key deliverables in this role will include: Reporting to the Operations Manager, the project manager will lead multiple project managers and teams and execute duties in a professional manner to build team and customer confidence and thereby contributing to the promotion of Projects Business growth. First line problem solver. Provide the leadership, drive, discipline, and support of the Project Managers and the teams through direction, guidance, advice, support, commitment, effort and dedication as required to direct reports, other team members and customers. To work within all set procedures and to ensure Health and Safety is the most important element in this regard. Undertake the site supervisor role when required, in accordance with the CDM regulations as required - this may include the control of Customer appointed contractors and/or company appointed sub contract labour. Efficiently execute the project management role on a number of projects running concurrently while managing their team of Project Managers. Oversee the tasks and task types allocated to others in a diligent manner in pursuit of effective project delivery. Appraise direct reports regularly in order to develop them, increase skill range, knowledge base and performance in the process. Resource control. Undertake the organisation, control and deployment of materials/equipment/labour resources for upcoming works on a range of projects running concurrently. Good commercial awareness and completion of valuations against a set scope Keep safe and maintain all company property issued, ensure it is routinely PAT or calibration tested and bring to the company's attention any items that are not of a serviceable nature in a timely manner. Production of as built records, test results, updated drawings and reports for projects. What we're looking for : HNC/Degree in Electrical Engineering (and / or time served) Good operational knowledge of electrical power distribution systems. Site safety passport and/or experience of working on CDM sites. SSSTS OR SMSTS is desirable, not essential. Possession of SSE DNO authorisation to receive and cancel PTW (or alternative equivalent DNO authorisation i.e. SPEN, NPg, UKPN). For more information, please apply now with a full CV and salary expectations. Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Car/Car allowance Salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with a leading provider and up to 8% employer contribution 25 days holiday Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Project Manager Scotland - Central, Northern and Highlands Permanent Competitive + Car/Car Allowance + Flexible Benefits Summary An opportunity has opened for a Project Manager, within our SSE North Scotland business, to lead a number of small teams installing and constructing electrical power distribution and transmission systems from 11kV to 132kV in a manner that delivers safe, profitable, timely, high workmanship quality and fit for purpose networks for the customer and which promotes the company in a positive light at all times. While performing Project management of their own projects the Project Manager will provide supervision and direction to a number of staff as they provide the management, control and execution of a number of diverse electrical network projects running concurrently. These may include the installation of ground mounted and structure mounted power system components, cable systems, switchgear, transformers, busbars, relay panels and associated equipment in substations operating at up to 132KV. Some of the key deliverables in this role will include: Reporting to the Operations Manager, the project manager will lead multiple project managers and teams and execute duties in a professional manner to build team and customer confidence and thereby contributing to the promotion of Projects Business growth. First line problem solver. Provide the leadership, drive, discipline, and support of the Project Managers and the teams through direction, guidance, advice, support, commitment, effort and dedication as required to direct reports, other team members and customers. To work within all set procedures and to ensure Health and Safety is the most important element in this regard. Undertake the site supervisor role when required, in accordance with the CDM regulations as required - this may include the control of Customer appointed contractors and/or company appointed sub contract labour. Efficiently execute the project management role on a number of projects running concurrently while managing their team of Project Managers. Oversee the tasks and task types allocated to others in a diligent manner in pursuit of effective project delivery. Appraise direct reports regularly in order to develop them, increase skill range, knowledge base and performance in the process. Resource control. Undertake the organisation, control and deployment of materials/equipment/labour resources for upcoming works on a range of projects running concurrently. Good commercial awareness and completion of valuations against a set scope Keep safe and maintain all company property issued, ensure it is routinely PAT or calibration tested and bring to the company's attention any items that are not of a serviceable nature in a timely manner. Production of as built records, test results, updated drawings and reports for projects. What we're looking for : HNC/Degree in Electrical Engineering (and / or time served) Good operational knowledge of electrical power distribution systems. Site safety passport and/or experience of working on CDM sites. SSSTS OR SMSTS is desirable, not essential. Possession of SSE DNO authorisation to receive and cancel PTW (or alternative equivalent DNO authorisation i.e. SPEN, NPg, UKPN). For more information, please apply now with a full CV and salary expectations. Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Car/Car allowance Salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with a leading provider and up to 8% employer contribution 25 days holiday Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Jan 09, 2026
Full time
Project Manager Scotland - Central, Northern and Highlands Permanent Competitive + Car/Car Allowance + Flexible Benefits Summary An opportunity has opened for a Project Manager, within our SSE North Scotland business, to lead a number of small teams installing and constructing electrical power distribution and transmission systems from 11kV to 132kV in a manner that delivers safe, profitable, timely, high workmanship quality and fit for purpose networks for the customer and which promotes the company in a positive light at all times. While performing Project management of their own projects the Project Manager will provide supervision and direction to a number of staff as they provide the management, control and execution of a number of diverse electrical network projects running concurrently. These may include the installation of ground mounted and structure mounted power system components, cable systems, switchgear, transformers, busbars, relay panels and associated equipment in substations operating at up to 132KV. Some of the key deliverables in this role will include: Reporting to the Operations Manager, the project manager will lead multiple project managers and teams and execute duties in a professional manner to build team and customer confidence and thereby contributing to the promotion of Projects Business growth. First line problem solver. Provide the leadership, drive, discipline, and support of the Project Managers and the teams through direction, guidance, advice, support, commitment, effort and dedication as required to direct reports, other team members and customers. To work within all set procedures and to ensure Health and Safety is the most important element in this regard. Undertake the site supervisor role when required, in accordance with the CDM regulations as required - this may include the control of Customer appointed contractors and/or company appointed sub contract labour. Efficiently execute the project management role on a number of projects running concurrently while managing their team of Project Managers. Oversee the tasks and task types allocated to others in a diligent manner in pursuit of effective project delivery. Appraise direct reports regularly in order to develop them, increase skill range, knowledge base and performance in the process. Resource control. Undertake the organisation, control and deployment of materials/equipment/labour resources for upcoming works on a range of projects running concurrently. Good commercial awareness and completion of valuations against a set scope Keep safe and maintain all company property issued, ensure it is routinely PAT or calibration tested and bring to the company's attention any items that are not of a serviceable nature in a timely manner. Production of as built records, test results, updated drawings and reports for projects. What we're looking for : HNC/Degree in Electrical Engineering (and / or time served) Good operational knowledge of electrical power distribution systems. Site safety passport and/or experience of working on CDM sites. SSSTS OR SMSTS is desirable, not essential. Possession of SSE DNO authorisation to receive and cancel PTW (or alternative equivalent DNO authorisation i.e. SPEN, NPg, UKPN). For more information, please apply now with a full CV and salary expectations. Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Car/Car allowance Salary sacrifice car scheme (Hybrid/Electric Vehicle) Pension with a leading provider and up to 8% employer contribution 25 days holiday Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
KHIPU Networks have an exciting opportunity for a Security Engineer to join the team. Location: Fleet, Hampshire, GU51 3TW Salary: Competitive + Benefits About Us: KHIPU Networks is an award-winning, and highly successful Cyber Security company based in the UK and Africa. We offer outstanding opportunities for candidates of all levels within a dynamic and flexible working environment. Founded in 2005, KHIPU Networks ethos has always been to work in partnership with customers, to understand their environments and challenges so that we can design and deploy Best of Breed solutions that enable them to meet their strategic goals. KHIPU Networks is a privately owned award-winning international Cyber Security Company delivering a wide range of network, wireless and security solutions, technologies and services across multiple sectors. We are honoured to be by Royal Appointment to His Majesty the King, and are proud to be an ISO9001, ISO27001, ISO14001 and ISO45001 certified company. We also support the National Apprenticeship Scheme, employing and developing apprentices within all sectors of the company. Security Engineer The Role: We are continuing to achieve significant growth and are seeking a Security / Firewall Engineer to join our highly skilled Support and Managed Services team to help deliver services to our customers. You will be joining a team of dedicated IT professionals delivering new and exciting cyber-security systems in a fast-moving industry leading environment. Security Engineer Key Responsibilities: - Performing upgrades and advanced configuration change requests on managed customer Firewalls or Network equipment - Performing troubleshooting providing "hands on" 2nd/3rd line escalation assistance to colleagues, liaising with the manufacturers when appropriate - Using your skills and experience to attempt any cases, adapting troubleshooting skills and knowledge of firewalls and networking - Engaging with customers professionally, providing telephone, email and remote technical assistance - Ensuring all parties are regularly updated with the progress of incidents and change requests - Contributing to setting up LAB environments to simulate customer environments, troubleshoot as well as develop skills and expertise - Providing mentorship and guidance for junior engineers Security Engineer You: - Experience working in a Support or Managed Services environment - Advanced Next Generation Firewall troubleshooting and configuration experience e.g. Palo Alto, Fortigate, Checkpoint, Cisco Firepower - Industry certifications are looked upon favourably especially if you hold them with vendors we work with e.g. Palo Alto PCNSA, PCNSE - If you have experience and hold equivalent certifications with other vendors we would still love to hear from you e.g. Fortigate, Checkpoint, Cisco Firepower/ASA - CCSA, CCSE, NSE5, NSE6, CCNA/CCNP Security or equivalent - Strong knowledge of networking e.g. CCNA/CCNP or equivalent - Excellent communication skills, both written and verbal - Understand a wider impact of changes to production systems Security Engineer Benefits: KHIPU Networks offer a competitive salary and extensive training alongside a range of extensive benefits including: - 26 days annual leave increasing 1 day a year up to a max of 31 days - Birthday leave - Employer pension contributions - Life insurance 4 x annual salary - Annual health checks - Cycle to work scheme - Private medical and dental cover - Eye tests - Free tea/coffee/fresh fruit in the office - Scheduled PT sessions - Breakout room, garden, roof terrace and even a bar! To submit your application for this Security Engineer opportunity click Apply now!
Jan 08, 2026
Full time
KHIPU Networks have an exciting opportunity for a Security Engineer to join the team. Location: Fleet, Hampshire, GU51 3TW Salary: Competitive + Benefits About Us: KHIPU Networks is an award-winning, and highly successful Cyber Security company based in the UK and Africa. We offer outstanding opportunities for candidates of all levels within a dynamic and flexible working environment. Founded in 2005, KHIPU Networks ethos has always been to work in partnership with customers, to understand their environments and challenges so that we can design and deploy Best of Breed solutions that enable them to meet their strategic goals. KHIPU Networks is a privately owned award-winning international Cyber Security Company delivering a wide range of network, wireless and security solutions, technologies and services across multiple sectors. We are honoured to be by Royal Appointment to His Majesty the King, and are proud to be an ISO9001, ISO27001, ISO14001 and ISO45001 certified company. We also support the National Apprenticeship Scheme, employing and developing apprentices within all sectors of the company. Security Engineer The Role: We are continuing to achieve significant growth and are seeking a Security / Firewall Engineer to join our highly skilled Support and Managed Services team to help deliver services to our customers. You will be joining a team of dedicated IT professionals delivering new and exciting cyber-security systems in a fast-moving industry leading environment. Security Engineer Key Responsibilities: - Performing upgrades and advanced configuration change requests on managed customer Firewalls or Network equipment - Performing troubleshooting providing "hands on" 2nd/3rd line escalation assistance to colleagues, liaising with the manufacturers when appropriate - Using your skills and experience to attempt any cases, adapting troubleshooting skills and knowledge of firewalls and networking - Engaging with customers professionally, providing telephone, email and remote technical assistance - Ensuring all parties are regularly updated with the progress of incidents and change requests - Contributing to setting up LAB environments to simulate customer environments, troubleshoot as well as develop skills and expertise - Providing mentorship and guidance for junior engineers Security Engineer You: - Experience working in a Support or Managed Services environment - Advanced Next Generation Firewall troubleshooting and configuration experience e.g. Palo Alto, Fortigate, Checkpoint, Cisco Firepower - Industry certifications are looked upon favourably especially if you hold them with vendors we work with e.g. Palo Alto PCNSA, PCNSE - If you have experience and hold equivalent certifications with other vendors we would still love to hear from you e.g. Fortigate, Checkpoint, Cisco Firepower/ASA - CCSA, CCSE, NSE5, NSE6, CCNA/CCNP Security or equivalent - Strong knowledge of networking e.g. CCNA/CCNP or equivalent - Excellent communication skills, both written and verbal - Understand a wider impact of changes to production systems Security Engineer Benefits: KHIPU Networks offer a competitive salary and extensive training alongside a range of extensive benefits including: - 26 days annual leave increasing 1 day a year up to a max of 31 days - Birthday leave - Employer pension contributions - Life insurance 4 x annual salary - Annual health checks - Cycle to work scheme - Private medical and dental cover - Eye tests - Free tea/coffee/fresh fruit in the office - Scheduled PT sessions - Breakout room, garden, roof terrace and even a bar! To submit your application for this Security Engineer opportunity click Apply now!
At the Ellison Institute of Technology (EIT), we're on a mission to translate scientific discovery into real world impact. We bring together visionary scientists, technologists, policy makers, and entrepreneurs to tackle humanity's greatest challenges in four transformative areas: Health, Medical Science & Generative Biology Food Security & Sustainable Agriculture Climate Change & Managing CO Artificial Intelligence & Robotics This is ambitious work - work that demands curiosity, courage, and a relentless drive to make a difference. At EIT, you'll join a community built on excellence, innovation, tenacity, trust, and collaboration, where bold ideas become real-world breakthroughs. Together, we push boundaries, embrace complexity, and create solutions to scale ideas from the lab to society. Explore more at . Welcome to the Institute of Materials & Devices for Life Sciences (MDLS) The vision for the Institute of Materials & Devices for Life Sciences (MDLS) at the Ellison Institute of Technology is to advance human health by scaling interdisciplinary science at the interface of chemistry, biology and engineering. Led by Professor Hagan Bayley, it will house more than 100 researchers engaging in three interrelated endeavors: Nanopore Sensing and Sequencing, 3D Tissue Construction, and Device Engineering. The MDLS Institute will expand nanopore science to detect a wider range of biological molecules, including volatiles in human breath. While in parallel, pioneering novel methods that integrate synthetic and living tissues into structures for organ repair. All the research will be underpinned by the development of new devices capable of serving as powerful tools in clinical settings. Laboratory Manager Role EIT is seeking an organised and experienced Laboratory Manager to lead operational, technical, and compliance functions for a rapidly expanding MDLS research laboratory. This pivotal role covers all aspects of facility management, safety compliance, workflow optimisation, and resource allocation, ensuring seamless support for cutting edge scientific research. The successful candidate will drive rigorous quality assurance across Nanopore science, Tissue Construction, and device engineering, acting as the primary liaison between MDLS research teams and EIT facilities, procurement, quality, and H&S teams. Responsibilities include SOP development, space management, inventory oversight, and audit readiness, enabling scientific excellence, operational resilience, and scalability in a dynamic, mission driven environment. A solid understanding of Nanopore, Tissue Construction, and device engineering is essential. Key Responsibilities Facility Management Oversee daily facilities of the laboratories, ensuring efficient workflow and adherence to the quality standards specifically required for the MDLS Institute. Implement and enforce laboratory safety procedures, ensuring compliance with regulatory requirements. Manage training, mentoring, of MDLS researchers to ensure researchers are operating compliantly across all workflows and procedures. Monitor lab conditions, including temperature, humidity, and air quality, to ensure that they meet the specifications required for operations. Work closely with scientific leadership to understand research objectives and adapt laboratory operations to support evolving needs. Serve as the key point of contact for the central EIT facilities team and provide updates on equipment, facilities, and operational issues, suggesting improvements or modifications for consideration. Equipment Management Work with MDLS researchers and the EIT procurement specialist to ensure the laboratory is properly maintained and organised, with all equipment, consumables, and reagents available for research projects including inventories and COSHH assessments. Oversee the set up of laboratory facilities and work with Lab Technicians and Lab staff to ensure these protocols are maintained, including cleanliness, accident reporting procedures, signage for biohazards. Work with team members to ensure that all logs and systems for overseeing the maintenance equipment and instruments are in place, and appropriate reporting mechanisms are in place for the MDLS. Oversee maintenance, calibration, and troubleshooting of laboratory equipment. Work with external vendors and service providers to maintain or repair laboratory equipment as needed. Maintain communication with research teams, establishing a scheduling system for shared facility and equipment access. Ensure improvements are identified to manage scheduling conflicts when facility restrictions are identified. Operational Support Develop and implement Standard Operating Procedures (SOPs) for relevant laboratory processes, ensuring consistency and compliance with quality standards. Maintain an up to date library of specialist risk assessment forms and COSHH forms for all relevant lab substances and ensure regular monitoring, review, and updates as needed. Troubleshoot technical and operational issues in workflows and implement solutions to prevent delays in project timelines. Manage access and user training of equipment, including establishment of appropriate training procedures for new users. Optimise laboratory space and equipment usage to support the work of a rapidly growing research team while maintaining flexibility for diverse research projects. Oversee effective and compliant waste management processes for the MDLS. Inventory and Supply Chain Management Working alongside the technical procurement specialist, laboratory technicians and relevant finance departments, manage inventory levels for laboratory consumables, reagents, and critical supplies, ensuring uninterrupted operations. Track and maintain proper documentation of inventory and ensure the timely ordering of supplies to avoid stockouts or delays. Maintain a system for tracking the usage, storage, and disposal of hazardous materials, ensuring safety and regulatory compliance. Quality Assurance and Compliance Oversee compliance with relevant safety, regulatory, and quality standards in all aspects of laboratory operations. Induction and protocol development for MDLS lab compliance areas. Implement and maintain quality control (QC) processes for relevant processing workflows, ensuring high accuracy and reproducibility of results. Participate in internal and external audits and inspections, ensuring the lab meets all compliance requirements. Ensure proper documentation of processes, workflows, and sample handling procedures in accordance with regulatory requirements. Designated person for HumanTissue Authority (HTA) license, and sample workflow mapping and protocols to prepare labs for license. Essential Knowledge, Skills and Experience Educated to a minimum of BSc up to PhD in a relevant field. At least 5 years of experience working in a laboratory environment, with a minimum of 2 years in a management or supervisory role. Familiarity with laboratory safety protocols, regulatory requirements, and quality management systems. Familiar with biosafety across tissue engineering/biological/chemistry research (e.g., Chemicals/radioactivity/lasers). Key Attributes Strong leadership and team management skills, with the ability to motivate and manage a diverse group of laboratory professionals. Excellent problem solving and troubleshooting skills in a high tech laboratory environment. Strong organisational skills, with an ability to manage multiple projects and priorities. In depth knowledge of laboratory operations, including equipment maintenance, safety, and regulatory compliance. Proficiency in laboratory management software, inventory systems, and data tracking tools. Effective communication skills, with the ability to work collaboratively across multidisciplinary teams. Detail oriented with strong analytical and critical thinking skills. Ability to work in a fast paced, high pressure environment with a flexible, solutions oriented mindset. Strong commitment to maintaining a safe, efficient, and compliant laboratory environment. Our Benefits Enhanced holiday pay Pension Life Assurance Income Protection Private Medical Insurance Hospital Cash Plan Therapy Services Perk Box Electric Car Scheme Working Together - What It Involves You must have the right to work permanently in the UK with a willingness to travel as necessary. You will live in, or within easy commuting distance of, Oxford. NB: the above are both optional based on the role being recruited for
Jan 08, 2026
Full time
At the Ellison Institute of Technology (EIT), we're on a mission to translate scientific discovery into real world impact. We bring together visionary scientists, technologists, policy makers, and entrepreneurs to tackle humanity's greatest challenges in four transformative areas: Health, Medical Science & Generative Biology Food Security & Sustainable Agriculture Climate Change & Managing CO Artificial Intelligence & Robotics This is ambitious work - work that demands curiosity, courage, and a relentless drive to make a difference. At EIT, you'll join a community built on excellence, innovation, tenacity, trust, and collaboration, where bold ideas become real-world breakthroughs. Together, we push boundaries, embrace complexity, and create solutions to scale ideas from the lab to society. Explore more at . Welcome to the Institute of Materials & Devices for Life Sciences (MDLS) The vision for the Institute of Materials & Devices for Life Sciences (MDLS) at the Ellison Institute of Technology is to advance human health by scaling interdisciplinary science at the interface of chemistry, biology and engineering. Led by Professor Hagan Bayley, it will house more than 100 researchers engaging in three interrelated endeavors: Nanopore Sensing and Sequencing, 3D Tissue Construction, and Device Engineering. The MDLS Institute will expand nanopore science to detect a wider range of biological molecules, including volatiles in human breath. While in parallel, pioneering novel methods that integrate synthetic and living tissues into structures for organ repair. All the research will be underpinned by the development of new devices capable of serving as powerful tools in clinical settings. Laboratory Manager Role EIT is seeking an organised and experienced Laboratory Manager to lead operational, technical, and compliance functions for a rapidly expanding MDLS research laboratory. This pivotal role covers all aspects of facility management, safety compliance, workflow optimisation, and resource allocation, ensuring seamless support for cutting edge scientific research. The successful candidate will drive rigorous quality assurance across Nanopore science, Tissue Construction, and device engineering, acting as the primary liaison between MDLS research teams and EIT facilities, procurement, quality, and H&S teams. Responsibilities include SOP development, space management, inventory oversight, and audit readiness, enabling scientific excellence, operational resilience, and scalability in a dynamic, mission driven environment. A solid understanding of Nanopore, Tissue Construction, and device engineering is essential. Key Responsibilities Facility Management Oversee daily facilities of the laboratories, ensuring efficient workflow and adherence to the quality standards specifically required for the MDLS Institute. Implement and enforce laboratory safety procedures, ensuring compliance with regulatory requirements. Manage training, mentoring, of MDLS researchers to ensure researchers are operating compliantly across all workflows and procedures. Monitor lab conditions, including temperature, humidity, and air quality, to ensure that they meet the specifications required for operations. Work closely with scientific leadership to understand research objectives and adapt laboratory operations to support evolving needs. Serve as the key point of contact for the central EIT facilities team and provide updates on equipment, facilities, and operational issues, suggesting improvements or modifications for consideration. Equipment Management Work with MDLS researchers and the EIT procurement specialist to ensure the laboratory is properly maintained and organised, with all equipment, consumables, and reagents available for research projects including inventories and COSHH assessments. Oversee the set up of laboratory facilities and work with Lab Technicians and Lab staff to ensure these protocols are maintained, including cleanliness, accident reporting procedures, signage for biohazards. Work with team members to ensure that all logs and systems for overseeing the maintenance equipment and instruments are in place, and appropriate reporting mechanisms are in place for the MDLS. Oversee maintenance, calibration, and troubleshooting of laboratory equipment. Work with external vendors and service providers to maintain or repair laboratory equipment as needed. Maintain communication with research teams, establishing a scheduling system for shared facility and equipment access. Ensure improvements are identified to manage scheduling conflicts when facility restrictions are identified. Operational Support Develop and implement Standard Operating Procedures (SOPs) for relevant laboratory processes, ensuring consistency and compliance with quality standards. Maintain an up to date library of specialist risk assessment forms and COSHH forms for all relevant lab substances and ensure regular monitoring, review, and updates as needed. Troubleshoot technical and operational issues in workflows and implement solutions to prevent delays in project timelines. Manage access and user training of equipment, including establishment of appropriate training procedures for new users. Optimise laboratory space and equipment usage to support the work of a rapidly growing research team while maintaining flexibility for diverse research projects. Oversee effective and compliant waste management processes for the MDLS. Inventory and Supply Chain Management Working alongside the technical procurement specialist, laboratory technicians and relevant finance departments, manage inventory levels for laboratory consumables, reagents, and critical supplies, ensuring uninterrupted operations. Track and maintain proper documentation of inventory and ensure the timely ordering of supplies to avoid stockouts or delays. Maintain a system for tracking the usage, storage, and disposal of hazardous materials, ensuring safety and regulatory compliance. Quality Assurance and Compliance Oversee compliance with relevant safety, regulatory, and quality standards in all aspects of laboratory operations. Induction and protocol development for MDLS lab compliance areas. Implement and maintain quality control (QC) processes for relevant processing workflows, ensuring high accuracy and reproducibility of results. Participate in internal and external audits and inspections, ensuring the lab meets all compliance requirements. Ensure proper documentation of processes, workflows, and sample handling procedures in accordance with regulatory requirements. Designated person for HumanTissue Authority (HTA) license, and sample workflow mapping and protocols to prepare labs for license. Essential Knowledge, Skills and Experience Educated to a minimum of BSc up to PhD in a relevant field. At least 5 years of experience working in a laboratory environment, with a minimum of 2 years in a management or supervisory role. Familiarity with laboratory safety protocols, regulatory requirements, and quality management systems. Familiar with biosafety across tissue engineering/biological/chemistry research (e.g., Chemicals/radioactivity/lasers). Key Attributes Strong leadership and team management skills, with the ability to motivate and manage a diverse group of laboratory professionals. Excellent problem solving and troubleshooting skills in a high tech laboratory environment. Strong organisational skills, with an ability to manage multiple projects and priorities. In depth knowledge of laboratory operations, including equipment maintenance, safety, and regulatory compliance. Proficiency in laboratory management software, inventory systems, and data tracking tools. Effective communication skills, with the ability to work collaboratively across multidisciplinary teams. Detail oriented with strong analytical and critical thinking skills. Ability to work in a fast paced, high pressure environment with a flexible, solutions oriented mindset. Strong commitment to maintaining a safe, efficient, and compliant laboratory environment. Our Benefits Enhanced holiday pay Pension Life Assurance Income Protection Private Medical Insurance Hospital Cash Plan Therapy Services Perk Box Electric Car Scheme Working Together - What It Involves You must have the right to work permanently in the UK with a willingness to travel as necessary. You will live in, or within easy commuting distance of, Oxford. NB: the above are both optional based on the role being recruited for
Sony UK TEC Limited Overview Sony UK Technology Centre Limited is the only manufacturing centre for Sony in Europe, and have over 500 highly skilled team players who help create some of the most advanced technology on the global market. The heart of today's operation at Pencoed is centered on the manufacture of high technology Broadcast and Professional Cameras and Systems including the latest industry leading 4K technology. Alongside this, we provide contract manufacturing solutions for multiple non-Sony branded businesses. This collaborative approach to contract manufacturing has produced many commercial successes over the years, including the best-selling British computer of all time, the Raspberry Pi. Additionally, we are the home of a Sony customer service and solutions centre, a business incubation centre and much more. Role Overview We are looking for an Industrial Engineer to join our multi-disciplinary manufacturing facility. This role requires focusing on production concepts, process quality improvements, manufacturing cost control and the elimination of waste and delivery of industry 4.0 solutions. You will have the opportunity to work collaboratively with the engineering and operations teams which will enable you to work in a dynamic environment, with cutting edge technologies. Using your imagination, innovation and creativity skills will support in furthering your technical and professional skills. Key Responsibilities Design and implementation of new manufacturing facilities Coordinating with internal and external stakeholders to deliver strategic business objectives. Start to end production process flow creation Match manning to the ideal production process 'run rate' Identification and implementation of IIOT technology Process safety risk assessment management following training Leading quality improvement investigations and developing improvement actions Leading new equipment delivery and sign off. A dedicated team player with strong communication skills Relevant engineering Degree/ HNC / or time-served technician with experience Positive attitude towards working towards and meeting deadlines Willingness to travel to support projects, both domestic UK and overseas Self-motivated and strong sense of responsibility Productivity collection and analysis Problem solving techniques Quality improvement project work Demonstrate an understanding of Lean, Kaizen, SPC, 5S and other philosophies highly beneficial Ability to seek out opportunities for improvement within the facility, utilising necessary tools where appropriate (DMAIC, FMEA, DFM, Potential Problem Analysis) What we offer Generous company pension scheme Generous life assurance 33 days annual leave inclusive of public holidays Long service holiday days Complimentary onsite secure car park Onsite gym and changing facilities Subsidised canteen Private medical insurance Complimentary access to school holiday schemes
Jan 08, 2026
Full time
Sony UK TEC Limited Overview Sony UK Technology Centre Limited is the only manufacturing centre for Sony in Europe, and have over 500 highly skilled team players who help create some of the most advanced technology on the global market. The heart of today's operation at Pencoed is centered on the manufacture of high technology Broadcast and Professional Cameras and Systems including the latest industry leading 4K technology. Alongside this, we provide contract manufacturing solutions for multiple non-Sony branded businesses. This collaborative approach to contract manufacturing has produced many commercial successes over the years, including the best-selling British computer of all time, the Raspberry Pi. Additionally, we are the home of a Sony customer service and solutions centre, a business incubation centre and much more. Role Overview We are looking for an Industrial Engineer to join our multi-disciplinary manufacturing facility. This role requires focusing on production concepts, process quality improvements, manufacturing cost control and the elimination of waste and delivery of industry 4.0 solutions. You will have the opportunity to work collaboratively with the engineering and operations teams which will enable you to work in a dynamic environment, with cutting edge technologies. Using your imagination, innovation and creativity skills will support in furthering your technical and professional skills. Key Responsibilities Design and implementation of new manufacturing facilities Coordinating with internal and external stakeholders to deliver strategic business objectives. Start to end production process flow creation Match manning to the ideal production process 'run rate' Identification and implementation of IIOT technology Process safety risk assessment management following training Leading quality improvement investigations and developing improvement actions Leading new equipment delivery and sign off. A dedicated team player with strong communication skills Relevant engineering Degree/ HNC / or time-served technician with experience Positive attitude towards working towards and meeting deadlines Willingness to travel to support projects, both domestic UK and overseas Self-motivated and strong sense of responsibility Productivity collection and analysis Problem solving techniques Quality improvement project work Demonstrate an understanding of Lean, Kaizen, SPC, 5S and other philosophies highly beneficial Ability to seek out opportunities for improvement within the facility, utilising necessary tools where appropriate (DMAIC, FMEA, DFM, Potential Problem Analysis) What we offer Generous company pension scheme Generous life assurance 33 days annual leave inclusive of public holidays Long service holiday days Complimentary onsite secure car park Onsite gym and changing facilities Subsidised canteen Private medical insurance Complimentary access to school holiday schemes
HV/LV Cable Jointer ScotlandPermanentCompetitive + Company Vehicle + Flexible Benefits Freedom are currently recruiting for a Cable Jointer to join our team in Scotland. This is a fantastic opportunity to be part of a skilled team undertaking cable jointing works on paper/lead and polymeric cables, along with fitting and wireman duties. The role supports the upgrade and replacement of substation equipment, ensuring safe, high-quality workmanship and delivering fit-for-purpose networks for our customers. You'll be working on a variety of projects that promote the company in a positive light and contribute to the ongoing development of the UK's electrical infrastructure. Some of the key deliverables in this role will include: Supporting the installation of power cable joints and terminations on paper/lead or polymeric underground or substation cable systems, switchgear, transformers, and associated equipment in substations operating at up to 33kV. Assisting with the replacement of plant/equipment and associated multicores and earthing cables to deliver fully operational schemes. Progressing to "Authorised Person" status under SSE's Safety Rules, enabling: Independent access to substations containing live exposed conductors. Receipt and cancellation of permits to work. Supervision of working parties. Recognising and promoting best practices and innovation. Maintaining and ensuring the safety of all issued company property, including PAT and calibration testing. Assisting technical staff such as SAPs with cable identification, spiking, phasing, and pressure testing of power cable systems up to 33kV. What we're looking for: We're looking for a skilled and safety-conscious individual with a strong background in cable jointing and substation work. Ideally, you'll have: Experience in cable jointing on LV/HV/EHV networks. A minimum of 2 years' practical or craft skills experience using hand tools. Basic operational knowledge of electrical or mechanical systems. A valid Site Safety Passport and/or experience working on CDM sites. Manual Handling certification. DNO Authorisations for SSE to receive and cancel PTW (or equivalent DNO authorisation such as ENW or NPG) - desirable. A full UK Driving Licence. HV/LV switching experience. Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Salary sacrifice car scheme (Hybrid/Electric Vehicle) 25 Days Holiday + Bank Holidays with an option to Buy/Sell additional days Pension with a leading provider and up to 8% employer contribution Personal Wellbeing and Volunteer Days Private Medical Insurance Life Assurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to choose from including: Dental Insurance, Gym Membership, Give-As-You Earn, Travel Insurance and Tax Free Bikes Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Jan 08, 2026
Full time
HV/LV Cable Jointer ScotlandPermanentCompetitive + Company Vehicle + Flexible Benefits Freedom are currently recruiting for a Cable Jointer to join our team in Scotland. This is a fantastic opportunity to be part of a skilled team undertaking cable jointing works on paper/lead and polymeric cables, along with fitting and wireman duties. The role supports the upgrade and replacement of substation equipment, ensuring safe, high-quality workmanship and delivering fit-for-purpose networks for our customers. You'll be working on a variety of projects that promote the company in a positive light and contribute to the ongoing development of the UK's electrical infrastructure. Some of the key deliverables in this role will include: Supporting the installation of power cable joints and terminations on paper/lead or polymeric underground or substation cable systems, switchgear, transformers, and associated equipment in substations operating at up to 33kV. Assisting with the replacement of plant/equipment and associated multicores and earthing cables to deliver fully operational schemes. Progressing to "Authorised Person" status under SSE's Safety Rules, enabling: Independent access to substations containing live exposed conductors. Receipt and cancellation of permits to work. Supervision of working parties. Recognising and promoting best practices and innovation. Maintaining and ensuring the safety of all issued company property, including PAT and calibration testing. Assisting technical staff such as SAPs with cable identification, spiking, phasing, and pressure testing of power cable systems up to 33kV. What we're looking for: We're looking for a skilled and safety-conscious individual with a strong background in cable jointing and substation work. Ideally, you'll have: Experience in cable jointing on LV/HV/EHV networks. A minimum of 2 years' practical or craft skills experience using hand tools. Basic operational knowledge of electrical or mechanical systems. A valid Site Safety Passport and/or experience working on CDM sites. Manual Handling certification. DNO Authorisations for SSE to receive and cancel PTW (or equivalent DNO authorisation such as ENW or NPG) - desirable. A full UK Driving Licence. HV/LV switching experience. Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Salary sacrifice car scheme (Hybrid/Electric Vehicle) 25 Days Holiday + Bank Holidays with an option to Buy/Sell additional days Pension with a leading provider and up to 8% employer contribution Personal Wellbeing and Volunteer Days Private Medical Insurance Life Assurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to choose from including: Dental Insurance, Gym Membership, Give-As-You Earn, Travel Insurance and Tax Free Bikes Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Electrical Maintenance Engineer - Ayrshire - Salary up to 38,000 DOE We are looking for a skilled Electrical Maintenance Engineer to join our team. The successful candidate will possess strong electrical maintenance knowledge and have completed a recognised apprenticeship. The role focuses on maintaining the safe and continuous operation of electrical supplies, building systems, plant, and equipment. This role is based on a static site. Key Responsibilities: Perform both planned and reactive electrical maintenance tasks, ensuring timely resolution of issues to avoid contractual penalties. Create Method Statements and Risk Assessments for issuing Permits-to-Work. Perform tasks such as electrical system maintenance, emergency lighting checks, fire alarm tests, water and medical gas system upkeep, and pressure system maintenance. Complete all necessary reports, test certificates, and Task Assessment sheets both electronically and in hard copy. Work collaboratively with the Facilities Team Leader, assisting with equipment failures and organising the supply of goods/services as required. Participate in overtime work and an on-call rota to support maintenance activities. Travel to other sites as needed and liaise professionally with clients. Person Specification: Completed a recognised electrical apprenticeship with proven experience in electrical maintenance. Competency in building service systems, with a solid understanding of equipment operation. Experience in hospital maintenance is desirable but not essential. Knowledge of relevant safety regulations, including Scottish Health Technical Memoranda (SHTM), is desirable. First Aid and CPR training within the last three years, or willingness to undergo training. Due to the nature of the contract successful candidate must be able to obtain a Basic Disclosure Scotland certificate. Salary & Benefits: Salary up to 38,000 24 days annual leave (+ public holidays) Life Cover equivalent to 1.5 times annual salary Employee discount shopping schemes on major brands and retailers Gym membership discounts Holiday purchase scheme 2 corporate social responsibility days per year Broad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmes
Jan 07, 2026
Full time
Electrical Maintenance Engineer - Ayrshire - Salary up to 38,000 DOE We are looking for a skilled Electrical Maintenance Engineer to join our team. The successful candidate will possess strong electrical maintenance knowledge and have completed a recognised apprenticeship. The role focuses on maintaining the safe and continuous operation of electrical supplies, building systems, plant, and equipment. This role is based on a static site. Key Responsibilities: Perform both planned and reactive electrical maintenance tasks, ensuring timely resolution of issues to avoid contractual penalties. Create Method Statements and Risk Assessments for issuing Permits-to-Work. Perform tasks such as electrical system maintenance, emergency lighting checks, fire alarm tests, water and medical gas system upkeep, and pressure system maintenance. Complete all necessary reports, test certificates, and Task Assessment sheets both electronically and in hard copy. Work collaboratively with the Facilities Team Leader, assisting with equipment failures and organising the supply of goods/services as required. Participate in overtime work and an on-call rota to support maintenance activities. Travel to other sites as needed and liaise professionally with clients. Person Specification: Completed a recognised electrical apprenticeship with proven experience in electrical maintenance. Competency in building service systems, with a solid understanding of equipment operation. Experience in hospital maintenance is desirable but not essential. Knowledge of relevant safety regulations, including Scottish Health Technical Memoranda (SHTM), is desirable. First Aid and CPR training within the last three years, or willingness to undergo training. Due to the nature of the contract successful candidate must be able to obtain a Basic Disclosure Scotland certificate. Salary & Benefits: Salary up to 38,000 24 days annual leave (+ public holidays) Life Cover equivalent to 1.5 times annual salary Employee discount shopping schemes on major brands and retailers Gym membership discounts Holiday purchase scheme 2 corporate social responsibility days per year Broad range of learning opportunities, such as professional qualifications, collective/individual training, and personalized support programmes
Electrical Avionics Engineer - Multiple levels required 45,000 - 90,000 base Location: Camberley, UK (Remote options could be available) Employment Type: Full-time, Hybrid work Overview We are seeking a Part 21 Electrical / Avionics Engineer to support the design and certification of large aircraft modifications. You will join a growing, high-performing team focused on delivering innovative solutions for airline customers. This role offers strong opportunities for technical development, professional growth, and involvement in end-to-end modification projects within an approved EASA Part 21J Design Organisation. Key Responsibilities Work collaboratively with the Electrical/Avionics Engineering Manager and a distributed global engineering team to identify requirements and deliver effective technical solutions for current and upcoming aircraft modification programmes. - Contribute to design activities ensuring compliance with design requirements, certification standards, and integration needs related to electrical and avionics systems. - Support certification activities to ensure compliance with applicable airworthiness regulations. - Produce high-quality engineering documentation, including: - Wiring diagrams - Wiring installation and harness fabrication drawings - Service Bulletins and accomplishment instructions - Instructions for Continued Airworthiness (ICA) and relevant manual supplements - EWIS assessments - Prepare certification and compliance documents such as: - Electrical Load Analysis (ELA) - System Safety, Equipment Qualification, and EWIS documentation - Compliance checklists and compliance statements - Test plans, test reports, and certification programmes - Represent the organisation during key customer milestone meetings (e.g., ITCM, PDR, CDR, FAI). - Provide on-site technical support during aircraft embodiment phases. Minimum Qualifications - Bachelor's degree (or equivalent) in Electrical Engineering, Avionics, Aerospace/Aeronautical Engineering, or a related discipline. - 1-2 years of relevant industry experience. Required Skills & Experience - Experience working within an EASA Part 21J Design Organisation (or equivalent) is strongly preferred. - Basic working knowledge of electrical/avionics-related airworthiness and regulatory requirements, including CS-25, JAR-25, FAR-25, and E/TSO. - Experience with aircraft interior modification programmes is advantageous. - Exceptional attention to detail and strong professional integrity. - Ability to work across multiple concurrent programmes with varying requirements. - Strong organisational skills with the ability to prioritise and adapt to changing demands. - Excellent interpersonal skills and a collaborative working style aligned with values such as honesty, integrity, and transparency. About You You are proactive, adaptable, and resilient, with a commitment to high standards and continuous improvement. You value trust, respect, and open communication, and you thrive in environments where collaboration and knowledge-sharing are part of everyday work. You are reflective, willing to learn, and unafraid to recognise and communicate your limitations. Additional Information - This role comes with extensive benefits including Private medical cover (including pre-existing conditions) & pension match up to 12%. If you are interested in this role or are even interested in receiving training for this role, apply as there are multiple positions at multiple levels.
Jan 07, 2026
Full time
Electrical Avionics Engineer - Multiple levels required 45,000 - 90,000 base Location: Camberley, UK (Remote options could be available) Employment Type: Full-time, Hybrid work Overview We are seeking a Part 21 Electrical / Avionics Engineer to support the design and certification of large aircraft modifications. You will join a growing, high-performing team focused on delivering innovative solutions for airline customers. This role offers strong opportunities for technical development, professional growth, and involvement in end-to-end modification projects within an approved EASA Part 21J Design Organisation. Key Responsibilities Work collaboratively with the Electrical/Avionics Engineering Manager and a distributed global engineering team to identify requirements and deliver effective technical solutions for current and upcoming aircraft modification programmes. - Contribute to design activities ensuring compliance with design requirements, certification standards, and integration needs related to electrical and avionics systems. - Support certification activities to ensure compliance with applicable airworthiness regulations. - Produce high-quality engineering documentation, including: - Wiring diagrams - Wiring installation and harness fabrication drawings - Service Bulletins and accomplishment instructions - Instructions for Continued Airworthiness (ICA) and relevant manual supplements - EWIS assessments - Prepare certification and compliance documents such as: - Electrical Load Analysis (ELA) - System Safety, Equipment Qualification, and EWIS documentation - Compliance checklists and compliance statements - Test plans, test reports, and certification programmes - Represent the organisation during key customer milestone meetings (e.g., ITCM, PDR, CDR, FAI). - Provide on-site technical support during aircraft embodiment phases. Minimum Qualifications - Bachelor's degree (or equivalent) in Electrical Engineering, Avionics, Aerospace/Aeronautical Engineering, or a related discipline. - 1-2 years of relevant industry experience. Required Skills & Experience - Experience working within an EASA Part 21J Design Organisation (or equivalent) is strongly preferred. - Basic working knowledge of electrical/avionics-related airworthiness and regulatory requirements, including CS-25, JAR-25, FAR-25, and E/TSO. - Experience with aircraft interior modification programmes is advantageous. - Exceptional attention to detail and strong professional integrity. - Ability to work across multiple concurrent programmes with varying requirements. - Strong organisational skills with the ability to prioritise and adapt to changing demands. - Excellent interpersonal skills and a collaborative working style aligned with values such as honesty, integrity, and transparency. About You You are proactive, adaptable, and resilient, with a commitment to high standards and continuous improvement. You value trust, respect, and open communication, and you thrive in environments where collaboration and knowledge-sharing are part of everyday work. You are reflective, willing to learn, and unafraid to recognise and communicate your limitations. Additional Information - This role comes with extensive benefits including Private medical cover (including pre-existing conditions) & pension match up to 12%. If you are interested in this role or are even interested in receiving training for this role, apply as there are multiple positions at multiple levels.
Resident Multiskilled Engineer (Electrical Bias) - High-End Corporate Office Spaces Belfast Permanent Competitive Salary on offer, Plus + Overtime + call out allowance (1-4) About the Role: We are looking for a skilled Multiskilled Engineer with a strong electrical bias, ready to excel in a high-end corporate environment. We have an exciting opportunity for a dedicated professional to join our team, providing exceptional building services to prestigious commercial office spaces. You'll be delivering planned and reactive maintenance of Electrical and Mechanical equipment, ensuring compliance and service excellence 24/7. Key Responsibilities: Carry out PPM tasks and reactive maintenance for electrical and mechanical systems in line with agreed schedules and Service Level Agreements (SLAs). Carry out Electrical and Mechanical Maintenance/Installation work in line with industry regulations, including IET Wiring Regulations BS7671 and relevant safety standards. Provide exceptional service to meet and exceed Key Performance Indicators (KPIs) while ensuring statutory compliance. Manage minor works carried out by others and liaise with the onsite FM team and service partners for seamless service provision. Develop strong working relationships with clients and their representatives, delivering a high standard of customer service. Work collaboratively with the team to meet all contractual obligations. Oversee subcontractor work, ensuring adherence to Health & Safety standards. Participate in the out-of-hours emergency call-out rota. (1-4) when on call a Van will be provided Monday to Friday Essential Qualifications & Experience: Recognised Electrical Apprenticeship (Essential). 18th Edition Proven experience in performing PPMs and handling routine electrical and mechanical maintenance (SFG20 or equivalent). Strong fault-finding and diagnostic skills. Excellent customer service and communication skills - client-facing role. Ability to work independently and within a collaborative team. Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Competitive Salary on offer, plus Overtime 25 Days Holiday plus 8 Bank Holidays Sick Pay Pension with a leading provider and employer contribution Salary sacrifice car scheme (Hybrid/Electric Vehicle) Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Jan 07, 2026
Full time
Resident Multiskilled Engineer (Electrical Bias) - High-End Corporate Office Spaces Belfast Permanent Competitive Salary on offer, Plus + Overtime + call out allowance (1-4) About the Role: We are looking for a skilled Multiskilled Engineer with a strong electrical bias, ready to excel in a high-end corporate environment. We have an exciting opportunity for a dedicated professional to join our team, providing exceptional building services to prestigious commercial office spaces. You'll be delivering planned and reactive maintenance of Electrical and Mechanical equipment, ensuring compliance and service excellence 24/7. Key Responsibilities: Carry out PPM tasks and reactive maintenance for electrical and mechanical systems in line with agreed schedules and Service Level Agreements (SLAs). Carry out Electrical and Mechanical Maintenance/Installation work in line with industry regulations, including IET Wiring Regulations BS7671 and relevant safety standards. Provide exceptional service to meet and exceed Key Performance Indicators (KPIs) while ensuring statutory compliance. Manage minor works carried out by others and liaise with the onsite FM team and service partners for seamless service provision. Develop strong working relationships with clients and their representatives, delivering a high standard of customer service. Work collaboratively with the team to meet all contractual obligations. Oversee subcontractor work, ensuring adherence to Health & Safety standards. Participate in the out-of-hours emergency call-out rota. (1-4) when on call a Van will be provided Monday to Friday Essential Qualifications & Experience: Recognised Electrical Apprenticeship (Essential). 18th Edition Proven experience in performing PPMs and handling routine electrical and mechanical maintenance (SFG20 or equivalent). Strong fault-finding and diagnostic skills. Excellent customer service and communication skills - client-facing role. Ability to work independently and within a collaborative team. Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Competitive Salary on offer, plus Overtime 25 Days Holiday plus 8 Bank Holidays Sick Pay Pension with a leading provider and employer contribution Salary sacrifice car scheme (Hybrid/Electric Vehicle) Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Electrical Field Manager Basildon Permanent Competitive + Flexible Benefits Summary Freedom's Network Services team are looking for an Electrical Field Manager that can join an established team and hit the ground running. To manage/supervise all construction activity on underground cable installation and substation up to 132kv replacement work across Eastern Region of our operations covering various projects in UKPN. Must have electrical experience & knowledge of working within UKPN substation. Some of the key deliverables in this role will include: Survey work sites (prior, during and after) inc final re-measures to include and report to PM Plan works in field of expertise (Electrical/Civils) Effective planning and utilisation of staff. preview work areas prior to works commencing Compile job packs for setting teams to work Carry out forward planning to identify future resource needs Compiling and submitting Permits/PAIs Setting to work of staff and ensuring compliance against procedures Proactively managing H&S issues & concerns, working closely with Project Management, Design and Site Management staff so that an accident and incident free culture is maintained Maintain awareness of H&S policy and rules and keep up to date on changes that impact your role. Ensure compliance with CDM Regulations Motivate Field staff to deliver high quality work in a consistent manner Ensure all site documentation is compiled and returned to the project manager Ensure construction teams are equipped with the correct tools for the job - eg IT equipment, general and special tooling etc. What we're looking for: Experience of managing sites and field-based staff on high voltage cable and substation projects and U/G works Electrical knowledge HV, EHV of substation builds and replacement works NRSW IoSH - Managing Safety, OR SMSTS, SSSTS First aid, manual handling CDM awareness Good IT skills Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Pension with a leading provider and up to 8% employer contribution 25 days holiday Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be
Jan 06, 2026
Full time
Electrical Field Manager Basildon Permanent Competitive + Flexible Benefits Summary Freedom's Network Services team are looking for an Electrical Field Manager that can join an established team and hit the ground running. To manage/supervise all construction activity on underground cable installation and substation up to 132kv replacement work across Eastern Region of our operations covering various projects in UKPN. Must have electrical experience & knowledge of working within UKPN substation. Some of the key deliverables in this role will include: Survey work sites (prior, during and after) inc final re-measures to include and report to PM Plan works in field of expertise (Electrical/Civils) Effective planning and utilisation of staff. preview work areas prior to works commencing Compile job packs for setting teams to work Carry out forward planning to identify future resource needs Compiling and submitting Permits/PAIs Setting to work of staff and ensuring compliance against procedures Proactively managing H&S issues & concerns, working closely with Project Management, Design and Site Management staff so that an accident and incident free culture is maintained Maintain awareness of H&S policy and rules and keep up to date on changes that impact your role. Ensure compliance with CDM Regulations Motivate Field staff to deliver high quality work in a consistent manner Ensure all site documentation is compiled and returned to the project manager Ensure construction teams are equipped with the correct tools for the job - eg IT equipment, general and special tooling etc. What we're looking for: Experience of managing sites and field-based staff on high voltage cable and substation projects and U/G works Electrical knowledge HV, EHV of substation builds and replacement works NRSW IoSH - Managing Safety, OR SMSTS, SSSTS First aid, manual handling CDM awareness Good IT skills Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Pension with a leading provider and up to 8% employer contribution 25 days holiday Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be
Ellison Institute of Technology
Oxford, Oxfordshire
At the Ellison Institute of Technology (EIT), we're on a mission to translate scientific discovery into real world impact. We bring together visionary scientists, technologists, policy makers, and entrepreneurs to tackle humanity's greatest challenges in four transformative areas: Health, Medical Science & Generative Biology Food Security & Sustainable Agriculture Climate Change & Managing CO Artificial Intelligence & Robotics This is ambitious work - work that demands curiosity, courage, and a relentless drive to make a difference. At EIT, you'll join a community built on excellence, innovation, tenacity, trust, and collaboration, where bold ideas become real-world breakthroughs. Together, we push boundaries, embrace complexity, and create solutions to scale ideas from the lab to society. Explore more at . Welcome to the Institute of Materials & Devices for Life Sciences (MDLS) The vision for the Institute of Materials & Devices for Life Sciences (MDLS) at the Ellison Institute of Technology is to advance human health by scaling interdisciplinary science at the interface of chemistry, biology and engineering. Led by Professor Hagan Bayley, it will house more than 100 researchers engaging in three interrelated endeavors: Nanopore Sensing and Sequencing, 3D Tissue Construction, and Device Engineering. The MDLS Institute will expand nanopore science to detect a wider range of biological molecules, including volatiles in human breath. While in parallel, pioneering novel methods that integrate synthetic and living tissues into structures for organ repair. All the research will be underpinned by the development of new devices capable of serving as powerful tools in clinical settings. Laboratory Manager Role EIT is seeking an organised and experienced Laboratory Manager to lead operational, technical, and compliance functions for a rapidly expanding MDLS research laboratory. This pivotal role covers all aspects of facility management, safety compliance, workflow optimisation, and resource allocation, ensuring seamless support for cutting edge scientific research. The successful candidate will drive rigorous quality assurance across Nanopore science, Tissue Construction, and device engineering, acting as the primary liaison between MDLS research teams and EIT facilities, procurement, quality, and H&S teams. Responsibilities include SOP development, space management, inventory oversight, and audit readiness, enabling scientific excellence, operational resilience, and scalability in a dynamic, mission driven environment. A solid understanding of Nanopore, Tissue Construction, and device engineering is essential. Key Responsibilities Facility Management Oversee daily facilities of the laboratories, ensuring efficient workflow and adherence to the quality standards specifically required for the MDLS Institute. Implement and enforce laboratory safety procedures, ensuring compliance with regulatory requirements. Manage training, mentoring, of MDLS researchers to ensure researchers are operating compliantly across all workflows and procedures. Monitor lab conditions, including temperature, humidity, and air quality, to ensure that they meet the specifications required for operations. Work closely with scientific leadership to understand research objectives and adapt laboratory operations to support evolving needs. Serve as the key point of contact for the central EIT facilities team and provide updates on equipment, facilities, and operational issues, suggesting improvements or modifications for consideration. Equipment Management Work with MDLS researchers and the EIT procurement specialist to ensure the laboratory is properly maintained and organised, with all equipment, consumables, and reagents available for research projects including inventories and COSHH assessments. Oversee the set up of laboratory facilities and work with Lab Technicians and Lab staff to ensure these protocols are maintained, including cleanliness, accident reporting procedures, signage for biohazards. Work with team members to ensure that all logs and systems for overseeing the maintenance equipment and instruments are in place, and appropriate reporting mechanisms are in place for the MDLS. Oversee maintenance, calibration, and troubleshooting of laboratory equipment. Work with external vendors and service providers to maintain or repair laboratory equipment as needed. Maintain communication with research teams, establishing a scheduling system for shared facility and equipment access. Ensure improvements are identified to manage scheduling conflicts when facility restrictions are identified. Operational Support Develop and implement Standard Operating Procedures (SOPs) for relevant laboratory processes, ensuring consistency and compliance with quality standards. Maintain an up to date library of specialist risk assessment forms and COSHH forms for all relevant lab substances and ensure regular monitoring, review, and updates as needed. Troubleshoot technical and operational issues in workflows and implement solutions to prevent delays in project timelines. Manage access and user training of equipment, including establishment of appropriate training procedures for new users. Optimise laboratory space and equipment usage to support the work of a rapidly growing research team while maintaining flexibility for diverse research projects. Oversee effective and compliant waste management processes for the MDLS. Inventory and Supply Chain Management Working alongside the technical procurement specialist, laboratory technicians and relevant finance departments, manage inventory levels for laboratory consumables, reagents, and critical supplies, ensuring uninterrupted operations. Track and maintain proper documentation of inventory and ensure the timely ordering of supplies to avoid stockouts or delays. Maintain a system for tracking the usage, storage, and disposal of hazardous materials, ensuring safety and regulatory compliance. Quality Assurance and Compliance Oversee compliance with relevant safety, regulatory, and quality standards in all aspects of laboratory operations. Induction and protocol development for MDLS lab compliance areas. Implement and maintain quality control (QC) processes for relevant processing workflows, ensuring high accuracy and reproducibility of results. Participate in internal and external audits and inspections, ensuring the lab meets all compliance requirements. Ensure proper documentation of processes, workflows, and sample handling procedures in accordance with regulatory requirements. Designated person for HumanTissue Authority (HTA) license, and sample workflow mapping and protocols to prepare labs for license. Essential Knowledge, Skills and Experience Educated to a minimum of BSc up to PhD in a relevant field. At least 5 years of experience working in a laboratory environment, with a minimum of 2 years in a management or supervisory role. Familiarity with laboratory safety protocols, regulatory requirements, and quality management systems. Familiar with biosafety across tissue engineering/biological/chemistry research (e.g., Chemicals/radioactivity/lasers). Key Attributes Strong leadership and team management skills, with the ability to motivate and manage a diverse group of laboratory professionals. Excellent problem solving and troubleshooting skills in a high tech laboratory environment. Strong organisational skills, with an ability to manage multiple projects and priorities. In depth knowledge of laboratory operations, including equipment maintenance, safety, and regulatory compliance. Proficiency in laboratory management software, inventory systems, and data tracking tools. Effective communication skills, with the ability to work collaboratively across multidisciplinary teams. Detail oriented with strong analytical and critical thinking skills. Ability to work in a fast paced, high pressure environment with a flexible, solutions oriented mindset. Strong commitment to maintaining a safe, efficient, and compliant laboratory environment. Our Benefits Enhanced holiday pay Pension Life Assurance Income Protection Private Medical Insurance Hospital Cash Plan Therapy Services Perk Box Electric Car Scheme Working Together - What It Involves You must have the right to work permanently in the UK with a willingness to travel as necessary. You will live in, or within easy commuting distance of, Oxford. NB: the above are both optional based on the role being recruited for
Jan 06, 2026
Full time
At the Ellison Institute of Technology (EIT), we're on a mission to translate scientific discovery into real world impact. We bring together visionary scientists, technologists, policy makers, and entrepreneurs to tackle humanity's greatest challenges in four transformative areas: Health, Medical Science & Generative Biology Food Security & Sustainable Agriculture Climate Change & Managing CO Artificial Intelligence & Robotics This is ambitious work - work that demands curiosity, courage, and a relentless drive to make a difference. At EIT, you'll join a community built on excellence, innovation, tenacity, trust, and collaboration, where bold ideas become real-world breakthroughs. Together, we push boundaries, embrace complexity, and create solutions to scale ideas from the lab to society. Explore more at . Welcome to the Institute of Materials & Devices for Life Sciences (MDLS) The vision for the Institute of Materials & Devices for Life Sciences (MDLS) at the Ellison Institute of Technology is to advance human health by scaling interdisciplinary science at the interface of chemistry, biology and engineering. Led by Professor Hagan Bayley, it will house more than 100 researchers engaging in three interrelated endeavors: Nanopore Sensing and Sequencing, 3D Tissue Construction, and Device Engineering. The MDLS Institute will expand nanopore science to detect a wider range of biological molecules, including volatiles in human breath. While in parallel, pioneering novel methods that integrate synthetic and living tissues into structures for organ repair. All the research will be underpinned by the development of new devices capable of serving as powerful tools in clinical settings. Laboratory Manager Role EIT is seeking an organised and experienced Laboratory Manager to lead operational, technical, and compliance functions for a rapidly expanding MDLS research laboratory. This pivotal role covers all aspects of facility management, safety compliance, workflow optimisation, and resource allocation, ensuring seamless support for cutting edge scientific research. The successful candidate will drive rigorous quality assurance across Nanopore science, Tissue Construction, and device engineering, acting as the primary liaison between MDLS research teams and EIT facilities, procurement, quality, and H&S teams. Responsibilities include SOP development, space management, inventory oversight, and audit readiness, enabling scientific excellence, operational resilience, and scalability in a dynamic, mission driven environment. A solid understanding of Nanopore, Tissue Construction, and device engineering is essential. Key Responsibilities Facility Management Oversee daily facilities of the laboratories, ensuring efficient workflow and adherence to the quality standards specifically required for the MDLS Institute. Implement and enforce laboratory safety procedures, ensuring compliance with regulatory requirements. Manage training, mentoring, of MDLS researchers to ensure researchers are operating compliantly across all workflows and procedures. Monitor lab conditions, including temperature, humidity, and air quality, to ensure that they meet the specifications required for operations. Work closely with scientific leadership to understand research objectives and adapt laboratory operations to support evolving needs. Serve as the key point of contact for the central EIT facilities team and provide updates on equipment, facilities, and operational issues, suggesting improvements or modifications for consideration. Equipment Management Work with MDLS researchers and the EIT procurement specialist to ensure the laboratory is properly maintained and organised, with all equipment, consumables, and reagents available for research projects including inventories and COSHH assessments. Oversee the set up of laboratory facilities and work with Lab Technicians and Lab staff to ensure these protocols are maintained, including cleanliness, accident reporting procedures, signage for biohazards. Work with team members to ensure that all logs and systems for overseeing the maintenance equipment and instruments are in place, and appropriate reporting mechanisms are in place for the MDLS. Oversee maintenance, calibration, and troubleshooting of laboratory equipment. Work with external vendors and service providers to maintain or repair laboratory equipment as needed. Maintain communication with research teams, establishing a scheduling system for shared facility and equipment access. Ensure improvements are identified to manage scheduling conflicts when facility restrictions are identified. Operational Support Develop and implement Standard Operating Procedures (SOPs) for relevant laboratory processes, ensuring consistency and compliance with quality standards. Maintain an up to date library of specialist risk assessment forms and COSHH forms for all relevant lab substances and ensure regular monitoring, review, and updates as needed. Troubleshoot technical and operational issues in workflows and implement solutions to prevent delays in project timelines. Manage access and user training of equipment, including establishment of appropriate training procedures for new users. Optimise laboratory space and equipment usage to support the work of a rapidly growing research team while maintaining flexibility for diverse research projects. Oversee effective and compliant waste management processes for the MDLS. Inventory and Supply Chain Management Working alongside the technical procurement specialist, laboratory technicians and relevant finance departments, manage inventory levels for laboratory consumables, reagents, and critical supplies, ensuring uninterrupted operations. Track and maintain proper documentation of inventory and ensure the timely ordering of supplies to avoid stockouts or delays. Maintain a system for tracking the usage, storage, and disposal of hazardous materials, ensuring safety and regulatory compliance. Quality Assurance and Compliance Oversee compliance with relevant safety, regulatory, and quality standards in all aspects of laboratory operations. Induction and protocol development for MDLS lab compliance areas. Implement and maintain quality control (QC) processes for relevant processing workflows, ensuring high accuracy and reproducibility of results. Participate in internal and external audits and inspections, ensuring the lab meets all compliance requirements. Ensure proper documentation of processes, workflows, and sample handling procedures in accordance with regulatory requirements. Designated person for HumanTissue Authority (HTA) license, and sample workflow mapping and protocols to prepare labs for license. Essential Knowledge, Skills and Experience Educated to a minimum of BSc up to PhD in a relevant field. At least 5 years of experience working in a laboratory environment, with a minimum of 2 years in a management or supervisory role. Familiarity with laboratory safety protocols, regulatory requirements, and quality management systems. Familiar with biosafety across tissue engineering/biological/chemistry research (e.g., Chemicals/radioactivity/lasers). Key Attributes Strong leadership and team management skills, with the ability to motivate and manage a diverse group of laboratory professionals. Excellent problem solving and troubleshooting skills in a high tech laboratory environment. Strong organisational skills, with an ability to manage multiple projects and priorities. In depth knowledge of laboratory operations, including equipment maintenance, safety, and regulatory compliance. Proficiency in laboratory management software, inventory systems, and data tracking tools. Effective communication skills, with the ability to work collaboratively across multidisciplinary teams. Detail oriented with strong analytical and critical thinking skills. Ability to work in a fast paced, high pressure environment with a flexible, solutions oriented mindset. Strong commitment to maintaining a safe, efficient, and compliant laboratory environment. Our Benefits Enhanced holiday pay Pension Life Assurance Income Protection Private Medical Insurance Hospital Cash Plan Therapy Services Perk Box Electric Car Scheme Working Together - What It Involves You must have the right to work permanently in the UK with a willingness to travel as necessary. You will live in, or within easy commuting distance of, Oxford. NB: the above are both optional based on the role being recruited for
Mechanical Engineer Band 4 16.18 Umbrella 3-6 month contract We are currently seeking a Band 4 Mechanical Shift Engineer to join a team within a hospital environment in Lancashire. This constitutes a blend of planned preventative maintenance coupled with emergency repairs and everything in between. You will demonstrate a good working knowledge of critical mechanical infrastructure ranging from steam raising plant, heating, ventilation and air conditioning systems to Medical Gas and building management systems in compliance with all statutory requirements and good practice guidelines. Job responsibilities Carry out reactive and planned preventative maintenance along with inspection and testing of complex systems including Steam raising plant (Shell Boilers),condensate & distribution pipework, MTHW, LTHW, HTG and DHWS systems, pressure systems, unvented and vented hot water systems, chilled water systems, medical gas systems. ventilation & air conditioning systems, compressed air systems, building management systems, catering equipment and other fixed hospital systems in line with statutory requirements and Trust procedures. Maintain stock levels for spares and equipment. Refer to and understand Engineering/Technical drawings, specifications and technical manuals. Be prepared to work in hazardous areas, confined spaces and on contaminated equipment taking all safety measures to prevent danger, avoid injury and prevent damage to equipment in accordance with Trust policy and safe working procedures. Qualifications & Education Essential City & Guilds Level 3 in Mechanical Engineering Services Relevant credited technical qualification Attained a technical qualification in a specialist area Desirable Hold a current Standard DBS on the updated service Knowledge & Experience Essential Proven ability to understand and comply with detailed procedure Evidence of continued training across traditional trade groups Completed a recognised engineering apprenticeship which consists of a time-served site experience element and relevant practical engineering tasks. Be able to work unsupervised/organise workloads and demonstrate an ability to manage priorities under pressure and make decisions Demonstrate a minimum two years previous experience within the NHS Desirable Previous experience of working in large complex building service role (non-domestic) Previous experience of how to work with detailed technical and HSE compliance related procedure
Jan 06, 2026
Seasonal
Mechanical Engineer Band 4 16.18 Umbrella 3-6 month contract We are currently seeking a Band 4 Mechanical Shift Engineer to join a team within a hospital environment in Lancashire. This constitutes a blend of planned preventative maintenance coupled with emergency repairs and everything in between. You will demonstrate a good working knowledge of critical mechanical infrastructure ranging from steam raising plant, heating, ventilation and air conditioning systems to Medical Gas and building management systems in compliance with all statutory requirements and good practice guidelines. Job responsibilities Carry out reactive and planned preventative maintenance along with inspection and testing of complex systems including Steam raising plant (Shell Boilers),condensate & distribution pipework, MTHW, LTHW, HTG and DHWS systems, pressure systems, unvented and vented hot water systems, chilled water systems, medical gas systems. ventilation & air conditioning systems, compressed air systems, building management systems, catering equipment and other fixed hospital systems in line with statutory requirements and Trust procedures. Maintain stock levels for spares and equipment. Refer to and understand Engineering/Technical drawings, specifications and technical manuals. Be prepared to work in hazardous areas, confined spaces and on contaminated equipment taking all safety measures to prevent danger, avoid injury and prevent damage to equipment in accordance with Trust policy and safe working procedures. Qualifications & Education Essential City & Guilds Level 3 in Mechanical Engineering Services Relevant credited technical qualification Attained a technical qualification in a specialist area Desirable Hold a current Standard DBS on the updated service Knowledge & Experience Essential Proven ability to understand and comply with detailed procedure Evidence of continued training across traditional trade groups Completed a recognised engineering apprenticeship which consists of a time-served site experience element and relevant practical engineering tasks. Be able to work unsupervised/organise workloads and demonstrate an ability to manage priorities under pressure and make decisions Demonstrate a minimum two years previous experience within the NHS Desirable Previous experience of working in large complex building service role (non-domestic) Previous experience of how to work with detailed technical and HSE compliance related procedure
Birmingham, East / West Midlands, Nationwide - Hybrid Permanent - Full Time Competitive Salary + Commercial Fleet Vehicle + Flexible Benefits Summary Freedom Professional Services are currently recruiting for an experienced Senior Utility Surveyor. The successful candidate would have strong experience undertaking surveys within a variety of industries and locations. Knowledge of PAS 128 is essential and the candidate must be able to demonstrate experience in the use of utility detection instruments, location instruments and have the skills to post process the data for production of a detailed utility survey. This is a Hybrid role with regular Home, Site and Office work, . Some of the key deliverables in this role will include: Produce detailed PAS 128 compliant surveys and accurate information on an as required basis for analysis by planners, builders and cartographers Utilise a range of equipment in the execution of PAS 128 compliant surveys, including electromagnetic locators, GPRs, GPS, TS and conventional methods. Resolve practical planning and development problems on site. Apply rigorous means of verification and validation of information before it is handed over to other professionals. Interpret data using record drawings, maps, charts, plans and other related forms of presentation. Use of computer-aided design (CAD) and other IT software to interpret data and present information. Maintain awareness and develop skills in new and emerging technologies. Verify plans, drawings and quantities for accuracy of calculations. Monitor and interpret contract design documents supplied by the client. Timely and accurate production of reports in line with project requirements. Resolve any unexpected technical difficulties and other problems that may arise. General Responsibilities Work collaboratively with project based personnel in the effective execution of project requirements, ensuring strict compliance to quality and safety standards. Proactively support the business and other members of the organisation in securing defined objectives Undertake all reasonable task assigned by the Survey Manager What we're looking for: If the above sounds exciting and something you're well versed in, then we'd love to hear from you. We're looking for an experienced, forward thinking and dedicated Senior Utility Surveyor to join our team. Ideally have qualifications and experience in: Experience in the use of electromagnetic locators and ground penetrating radar. Experience in use of GPS and Total Stations Experience in utility surveys and CCTV surveys Proficient in AutoCAD, Microsoft Office (Word and Excel) Experience in supervising small teams on site and able to Experience in communicate and resolving issues with staff and management Knowledge of n4ce or other survey software (Desirable) Knowledge of IQMaps/GRED HD or other GPR software (Desirable) Knowledge of Wincan or other CCTV software (Desirable) Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Salary Competitive depending on experience/qualifications Commercial Fleet Vehicle Pension with a leading provider and employer contribution 25 Days Holiday plus Bank Holidays Sick Pay Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be
Jan 05, 2026
Full time
Birmingham, East / West Midlands, Nationwide - Hybrid Permanent - Full Time Competitive Salary + Commercial Fleet Vehicle + Flexible Benefits Summary Freedom Professional Services are currently recruiting for an experienced Senior Utility Surveyor. The successful candidate would have strong experience undertaking surveys within a variety of industries and locations. Knowledge of PAS 128 is essential and the candidate must be able to demonstrate experience in the use of utility detection instruments, location instruments and have the skills to post process the data for production of a detailed utility survey. This is a Hybrid role with regular Home, Site and Office work, . Some of the key deliverables in this role will include: Produce detailed PAS 128 compliant surveys and accurate information on an as required basis for analysis by planners, builders and cartographers Utilise a range of equipment in the execution of PAS 128 compliant surveys, including electromagnetic locators, GPRs, GPS, TS and conventional methods. Resolve practical planning and development problems on site. Apply rigorous means of verification and validation of information before it is handed over to other professionals. Interpret data using record drawings, maps, charts, plans and other related forms of presentation. Use of computer-aided design (CAD) and other IT software to interpret data and present information. Maintain awareness and develop skills in new and emerging technologies. Verify plans, drawings and quantities for accuracy of calculations. Monitor and interpret contract design documents supplied by the client. Timely and accurate production of reports in line with project requirements. Resolve any unexpected technical difficulties and other problems that may arise. General Responsibilities Work collaboratively with project based personnel in the effective execution of project requirements, ensuring strict compliance to quality and safety standards. Proactively support the business and other members of the organisation in securing defined objectives Undertake all reasonable task assigned by the Survey Manager What we're looking for: If the above sounds exciting and something you're well versed in, then we'd love to hear from you. We're looking for an experienced, forward thinking and dedicated Senior Utility Surveyor to join our team. Ideally have qualifications and experience in: Experience in the use of electromagnetic locators and ground penetrating radar. Experience in use of GPS and Total Stations Experience in utility surveys and CCTV surveys Proficient in AutoCAD, Microsoft Office (Word and Excel) Experience in supervising small teams on site and able to Experience in communicate and resolving issues with staff and management Knowledge of n4ce or other survey software (Desirable) Knowledge of IQMaps/GRED HD or other GPR software (Desirable) Knowledge of Wincan or other CCTV software (Desirable) Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Salary Competitive depending on experience/qualifications Commercial Fleet Vehicle Pension with a leading provider and employer contribution 25 Days Holiday plus Bank Holidays Sick Pay Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be
Birmingham, East / West Midlands, Nationwide - Hybrid Permanent - Full Time Competitive Salary + Commercial Fleet Vehicle + Flexible Benefits Summary Freedom Professional Services are currently recruiting for an experienced Senior Utility Surveyor. The successful candidate would have strong experience undertaking surveys within a variety of industries and locations. Knowledge of PAS 128 is essential and the candidate must be able to demonstrate experience in the use of utility detection instruments, location instruments and have the skills to post process the data for production of a detailed utility survey. This is a Hybrid role with regular Home, Site and Office work, . Some of the key deliverables in this role will include: Produce detailed PAS 128 compliant surveys and accurate information on an as required basis for analysis by planners, builders and cartographers Utilise a range of equipment in the execution of PAS 128 compliant surveys, including electromagnetic locators, GPRs, GPS, TS and conventional methods. Resolve practical planning and development problems on site. Apply rigorous means of verification and validation of information before it is handed over to other professionals. Interpret data using record drawings, maps, charts, plans and other related forms of presentation. Use of computer-aided design (CAD) and other IT software to interpret data and present information. Maintain awareness and develop skills in new and emerging technologies. Verify plans, drawings and quantities for accuracy of calculations. Monitor and interpret contract design documents supplied by the client. Timely and accurate production of reports in line with project requirements. Resolve any unexpected technical difficulties and other problems that may arise. General Responsibilities Work collaboratively with project based personnel in the effective execution of project requirements, ensuring strict compliance to quality and safety standards. Proactively support the business and other members of the organisation in securing defined objectives Undertake all reasonable task assigned by the Survey Manager What we're looking for: If the above sounds exciting and something you're well versed in, then we'd love to hear from you. We're looking for an experienced, forward thinking and dedicated Senior Utility Surveyor to join our team. Ideally have qualifications and experience in: Experience in the use of electromagnetic locators and ground penetrating radar. Experience in use of GPS and Total Stations Experience in utility surveys and CCTV surveys Proficient in AutoCAD, Microsoft Office (Word and Excel) Experience in supervising small teams on site and able to Experience in communicate and resolving issues with staff and management Knowledge of n4ce or other survey software (Desirable) Knowledge of IQMaps/GRED HD or other GPR software (Desirable) Knowledge of Wincan or other CCTV software (Desirable) Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Salary Competitive depending on experience/qualifications Commercial Fleet Vehicle Pension with a leading provider and employer contribution 25 Days Holiday plus Bank Holidays Sick Pay Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be
Jan 05, 2026
Full time
Birmingham, East / West Midlands, Nationwide - Hybrid Permanent - Full Time Competitive Salary + Commercial Fleet Vehicle + Flexible Benefits Summary Freedom Professional Services are currently recruiting for an experienced Senior Utility Surveyor. The successful candidate would have strong experience undertaking surveys within a variety of industries and locations. Knowledge of PAS 128 is essential and the candidate must be able to demonstrate experience in the use of utility detection instruments, location instruments and have the skills to post process the data for production of a detailed utility survey. This is a Hybrid role with regular Home, Site and Office work, . Some of the key deliverables in this role will include: Produce detailed PAS 128 compliant surveys and accurate information on an as required basis for analysis by planners, builders and cartographers Utilise a range of equipment in the execution of PAS 128 compliant surveys, including electromagnetic locators, GPRs, GPS, TS and conventional methods. Resolve practical planning and development problems on site. Apply rigorous means of verification and validation of information before it is handed over to other professionals. Interpret data using record drawings, maps, charts, plans and other related forms of presentation. Use of computer-aided design (CAD) and other IT software to interpret data and present information. Maintain awareness and develop skills in new and emerging technologies. Verify plans, drawings and quantities for accuracy of calculations. Monitor and interpret contract design documents supplied by the client. Timely and accurate production of reports in line with project requirements. Resolve any unexpected technical difficulties and other problems that may arise. General Responsibilities Work collaboratively with project based personnel in the effective execution of project requirements, ensuring strict compliance to quality and safety standards. Proactively support the business and other members of the organisation in securing defined objectives Undertake all reasonable task assigned by the Survey Manager What we're looking for: If the above sounds exciting and something you're well versed in, then we'd love to hear from you. We're looking for an experienced, forward thinking and dedicated Senior Utility Surveyor to join our team. Ideally have qualifications and experience in: Experience in the use of electromagnetic locators and ground penetrating radar. Experience in use of GPS and Total Stations Experience in utility surveys and CCTV surveys Proficient in AutoCAD, Microsoft Office (Word and Excel) Experience in supervising small teams on site and able to Experience in communicate and resolving issues with staff and management Knowledge of n4ce or other survey software (Desirable) Knowledge of IQMaps/GRED HD or other GPR software (Desirable) Knowledge of Wincan or other CCTV software (Desirable) Benefits: We're always evolving our benefits to ensure we're attracting and retaining great people. Some of what you can expect includes: Salary Competitive depending on experience/qualifications Commercial Fleet Vehicle Pension with a leading provider and employer contribution 25 Days Holiday plus Bank Holidays Sick Pay Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes. Personal development programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be
M&E Technician - National Opportunities (Facilities Services Division) Location: UK Wide - including London, South East, Midlands, North West, Yorkshire, North East & Scotland, Plymouth Business Unit: NG Bailey - Facilities Services We are always looking to connect with talented M&E Technicians across the UK to join our Facilities Services division. As we continue to grow and support new and existing customer contracts, we welcome applications from skilled engineers interested in current and future opportunities. About the Role As an M&E Technician, you will play a key role in delivering planned and reactive maintenance across a range of commercial buildings, including offices, retail, mixed-use developments, critical environments, and public sector sites. Working as part of our onsite or mobile engineering teams, you'll ensure the safe, efficient, and high-quality operation of mechanical and electrical systems. Typical responsibilities include: Carrying out PPM and reactive maintenance on M&E plant and building services. Fault finding, repairs, and minor installations. Supporting statutory compliance tasks (e.g., emergency lighting, water hygiene, LV checks). Providing high levels of customer service to clients and building users. Ensuring all work is completed safely and in line with NG Bailey procedures. We're Looking For Recognised electrical or mechanical qualification (e.g., City & Guilds, NVQ Level 2/3, ONC, 18th Edition for electrical roles). Hands-on experience working with building services systems such as AHUs, FCUs, pumps, HVAC plant, small power, lighting, or basic controls. Strong fault-finding skills and experience with hand tools and test equipment. Ability to work independently or as part of a wider engineering team. Desirable: Experience within commercial FM, critical environments, or multi-skilled engineering roles. Desirable: Additional tickets such as F-Gas, LVAP, IPAF, PASMA, or water hygiene. What We Offer Opportunities to work on high-profile commercial and corporate facilities contracts. Career development and internal progression pathways across engineering, supervision, and management. 40 hours per week with opportunities for overtime. A supportive team culture with a strong focus on safety and wellbeing. Competitive benefits including: Pension with up to 8% employer contribution Private medical insurance Commercial vehicle (for mobile roles) Salary sacrifice car scheme (hybrid/EV) 25 days holiday + wellbeing and volunteering days 24/7 Employee Assistance Programme Flexible benefits package to suit your lifestyle Register Your Interest Click 'Apply' to submit your details and join our national M&E talent pool.If your CV matches our upcoming opportunities, a member of our team will get in touch to discuss suitable roles now or in the future. Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Jan 05, 2026
Full time
M&E Technician - National Opportunities (Facilities Services Division) Location: UK Wide - including London, South East, Midlands, North West, Yorkshire, North East & Scotland, Plymouth Business Unit: NG Bailey - Facilities Services We are always looking to connect with talented M&E Technicians across the UK to join our Facilities Services division. As we continue to grow and support new and existing customer contracts, we welcome applications from skilled engineers interested in current and future opportunities. About the Role As an M&E Technician, you will play a key role in delivering planned and reactive maintenance across a range of commercial buildings, including offices, retail, mixed-use developments, critical environments, and public sector sites. Working as part of our onsite or mobile engineering teams, you'll ensure the safe, efficient, and high-quality operation of mechanical and electrical systems. Typical responsibilities include: Carrying out PPM and reactive maintenance on M&E plant and building services. Fault finding, repairs, and minor installations. Supporting statutory compliance tasks (e.g., emergency lighting, water hygiene, LV checks). Providing high levels of customer service to clients and building users. Ensuring all work is completed safely and in line with NG Bailey procedures. We're Looking For Recognised electrical or mechanical qualification (e.g., City & Guilds, NVQ Level 2/3, ONC, 18th Edition for electrical roles). Hands-on experience working with building services systems such as AHUs, FCUs, pumps, HVAC plant, small power, lighting, or basic controls. Strong fault-finding skills and experience with hand tools and test equipment. Ability to work independently or as part of a wider engineering team. Desirable: Experience within commercial FM, critical environments, or multi-skilled engineering roles. Desirable: Additional tickets such as F-Gas, LVAP, IPAF, PASMA, or water hygiene. What We Offer Opportunities to work on high-profile commercial and corporate facilities contracts. Career development and internal progression pathways across engineering, supervision, and management. 40 hours per week with opportunities for overtime. A supportive team culture with a strong focus on safety and wellbeing. Competitive benefits including: Pension with up to 8% employer contribution Private medical insurance Commercial vehicle (for mobile roles) Salary sacrifice car scheme (hybrid/EV) 25 days holiday + wellbeing and volunteering days 24/7 Employee Assistance Programme Flexible benefits package to suit your lifestyle Register Your Interest Click 'Apply' to submit your details and join our national M&E talent pool.If your CV matches our upcoming opportunities, a member of our team will get in touch to discuss suitable roles now or in the future. Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies. Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.
Company Description AbbVie's mission is to discover and deliver innovative medicines and solutions that solve serious health issues today and address the medical challenges of tomorrow. We strive to have a remarkable impact on people's lives across several key therapeutic areas - immunology, oncology, neuroscience, and eye care - and products and services in our Allergan Aesthetics portfolio. For more information about AbbVie, please visit us at. onX,Facebook,Instagram,YouTube,LinkedInandTik Tok. Job Description The Laboratory Manager at DJS-AbbVie in Oxford will hold operational responsibility for the laboratory space in Oxford for DJS-AbbVie. They will act as a point of contact for the landlords at the WCFI or future DJS-AbbVie site as well as AbbVie Lab HS&E. They will hold a general responsibility to ensure smooth operations of the laboratory space. This includes but is not limited to devising and implementing strategies for the continuous supply of general use consumables, working with the landlord and AbbVie HS&E to ensure compliance of the laboratory space. Overall responsibility for onboarding new starters both to ensure a high standard of laboratory science and scientific report writing is maintained. General responsibility to ensure all equipment is serviced and operational, as well as working closely with the scientific team to identify and fill capability gaps. The expectation is that the Lab Manager will lead by example and ensure the highest standard of laboratory space to enable rapid and smooth progression of our scientific objectives. Key Responsibilities Manage and oversee implementation of all service contracts and relationships with external vendors related to laboratory equipment. Work together with DJS operations team to ensure smooth operations for both DJS laboratory space and any future expanded space requirements. Devise and implement strategy for the maintenance of a continuous supply of general use consumables in current laboratory space and any future new facility. Work with the WCFI/future landlords to ensure up to date risk assessments, compliance and all other documentation is submitted yearly as required. Collaborate with AbbVie HS+E to ensure our laboratory space is maintained at the correct standard. Responsibility to provide training for new starters on practical laboratory best practice and laboratory record keeping. Overall responsibility for maintenance of supplies, key reagents, general usage cell lines and implementation/maintenance of reagent/consumable tracking. Oversee the smooth laboratory operations within DJS included but not limited to receiving and storage of laboratory deliveries, matrix oversite of the laboratory team to retain a clean/well organised laboratory space. Oversite and responsibility for laboratory mycoplasma testing Qualifications Skills and Experience: Bachelors degree in Life sciences with extensive experience working in life science focused laboratory environment and laboratory operations. Proven experience of devising, implementing and streamlining laboratory operational strategies. Experience of matrix oversite of laboratory scientists in an industry or academic laboratory setting Proven ability to multitask whilst working with external and internal stakeholders to deliver complex and long term projects to a set timeline. Highly organised and detail orientated individual with strong interpersonal skills Additional Information AbbVie is an equal opportunity employer and is committed to operating with integrity, driving innovation, transforming lives and serving our community. Equal Opportunity Employer/Veterans/Disabled. US & Puerto Rico only - to learn more, visit US & Puerto Rico applicants seeking a reasonable accommodation, click here to learn more: What AbbVie Has to Offer Our work can-and does-have a tangible, lasting impact on millions of people. But it's not just the results that matter. How we achieve them matters, too. Leading with purpose, we work to build a more sustainable future for generations to come. We do that by putting our expertise, resources and talent to work to make a real difference for patients, communities and our world.
Jan 05, 2026
Full time
Company Description AbbVie's mission is to discover and deliver innovative medicines and solutions that solve serious health issues today and address the medical challenges of tomorrow. We strive to have a remarkable impact on people's lives across several key therapeutic areas - immunology, oncology, neuroscience, and eye care - and products and services in our Allergan Aesthetics portfolio. For more information about AbbVie, please visit us at. onX,Facebook,Instagram,YouTube,LinkedInandTik Tok. Job Description The Laboratory Manager at DJS-AbbVie in Oxford will hold operational responsibility for the laboratory space in Oxford for DJS-AbbVie. They will act as a point of contact for the landlords at the WCFI or future DJS-AbbVie site as well as AbbVie Lab HS&E. They will hold a general responsibility to ensure smooth operations of the laboratory space. This includes but is not limited to devising and implementing strategies for the continuous supply of general use consumables, working with the landlord and AbbVie HS&E to ensure compliance of the laboratory space. Overall responsibility for onboarding new starters both to ensure a high standard of laboratory science and scientific report writing is maintained. General responsibility to ensure all equipment is serviced and operational, as well as working closely with the scientific team to identify and fill capability gaps. The expectation is that the Lab Manager will lead by example and ensure the highest standard of laboratory space to enable rapid and smooth progression of our scientific objectives. Key Responsibilities Manage and oversee implementation of all service contracts and relationships with external vendors related to laboratory equipment. Work together with DJS operations team to ensure smooth operations for both DJS laboratory space and any future expanded space requirements. Devise and implement strategy for the maintenance of a continuous supply of general use consumables in current laboratory space and any future new facility. Work with the WCFI/future landlords to ensure up to date risk assessments, compliance and all other documentation is submitted yearly as required. Collaborate with AbbVie HS+E to ensure our laboratory space is maintained at the correct standard. Responsibility to provide training for new starters on practical laboratory best practice and laboratory record keeping. Overall responsibility for maintenance of supplies, key reagents, general usage cell lines and implementation/maintenance of reagent/consumable tracking. Oversee the smooth laboratory operations within DJS included but not limited to receiving and storage of laboratory deliveries, matrix oversite of the laboratory team to retain a clean/well organised laboratory space. Oversite and responsibility for laboratory mycoplasma testing Qualifications Skills and Experience: Bachelors degree in Life sciences with extensive experience working in life science focused laboratory environment and laboratory operations. Proven experience of devising, implementing and streamlining laboratory operational strategies. Experience of matrix oversite of laboratory scientists in an industry or academic laboratory setting Proven ability to multitask whilst working with external and internal stakeholders to deliver complex and long term projects to a set timeline. Highly organised and detail orientated individual with strong interpersonal skills Additional Information AbbVie is an equal opportunity employer and is committed to operating with integrity, driving innovation, transforming lives and serving our community. Equal Opportunity Employer/Veterans/Disabled. US & Puerto Rico only - to learn more, visit US & Puerto Rico applicants seeking a reasonable accommodation, click here to learn more: What AbbVie Has to Offer Our work can-and does-have a tangible, lasting impact on millions of people. But it's not just the results that matter. How we achieve them matters, too. Leading with purpose, we work to build a more sustainable future for generations to come. We do that by putting our expertise, resources and talent to work to make a real difference for patients, communities and our world.
A leading global Medical Device/Pharmaceutical company is seeking an R&D Lab Analyst based in Northern Ireland. The successful candidate will use analytical equipment, perform laboratory analyses, and ensure all equipment is calibrated and maintained. Candidates should have a degree in chemistry or a related field and laboratory experience, particularly with HPLC. This position offers a lucrative salary, generous holidays, and extensive benefits. Join a growing manufacturing facility for an exciting career opportunity.
Jan 05, 2026
Full time
A leading global Medical Device/Pharmaceutical company is seeking an R&D Lab Analyst based in Northern Ireland. The successful candidate will use analytical equipment, perform laboratory analyses, and ensure all equipment is calibrated and maintained. Candidates should have a degree in chemistry or a related field and laboratory experience, particularly with HPLC. This position offers a lucrative salary, generous holidays, and extensive benefits. Join a growing manufacturing facility for an exciting career opportunity.