I'm looking for a Product Assurance Engineer to join BAE Systems, working on Integrated Combat Systems projects as part of the Dreadnought Submarine programme. What you'll be doing: Working with the development teams to ensure they identify and implement appropriate mitigation plans for emergent technical risks to the product Providing independent technical scrutiny and conducting assessments of the maturity of the design. Working at the relevant stage within the engineering life-cycle to assure that these systems are designed, built, integrated and accepted into service Actively engage with multiple internal departments and the MoD in delivering Product Assurance against design intent for build and commissioning phases of submarine production Actively engage with the Build and Integration Team to understand the Combat System, platform build plan, the management of production defects, the critical path, etc. Attend and observe Installation Inspections, Final Installation Inspections, Set-to-Work activities, and Combat System Design Integration Facility, Platform Combat system Release and Test Readiness Reviews, as appropriate Essential Skills & Experience: Good understanding of submarine systems, design and operation, including transverse aspects, safety and certification Thorough knowledge of the engineering life-cycle, work independently and be able to apply good practices to your work An underpinning knowledge and understanding of the engineering activities associated with product development and realisation Desirable Skills & Experience: Capable of achieving the appropriate Professional Institution membership level, supported by an honour's degree or equivalent experience in an appropriate discipline Demonstrable knowledge of submarine design, commissioning, operation, safety/regulation and safety case architecture Specialist knowledge of Safety or Security in relation to complex systems The role is hybrid (a handful of times per month required on site) and can be based out of any of the following locations: Weymouth, Filton, Frimley, Portsmouth or Barrow . The salary is circa 50,000 plus benefits. You MUST be eligible for security clearance (SC) to be considered for this role.
Jan 06, 2026
Full time
I'm looking for a Product Assurance Engineer to join BAE Systems, working on Integrated Combat Systems projects as part of the Dreadnought Submarine programme. What you'll be doing: Working with the development teams to ensure they identify and implement appropriate mitigation plans for emergent technical risks to the product Providing independent technical scrutiny and conducting assessments of the maturity of the design. Working at the relevant stage within the engineering life-cycle to assure that these systems are designed, built, integrated and accepted into service Actively engage with multiple internal departments and the MoD in delivering Product Assurance against design intent for build and commissioning phases of submarine production Actively engage with the Build and Integration Team to understand the Combat System, platform build plan, the management of production defects, the critical path, etc. Attend and observe Installation Inspections, Final Installation Inspections, Set-to-Work activities, and Combat System Design Integration Facility, Platform Combat system Release and Test Readiness Reviews, as appropriate Essential Skills & Experience: Good understanding of submarine systems, design and operation, including transverse aspects, safety and certification Thorough knowledge of the engineering life-cycle, work independently and be able to apply good practices to your work An underpinning knowledge and understanding of the engineering activities associated with product development and realisation Desirable Skills & Experience: Capable of achieving the appropriate Professional Institution membership level, supported by an honour's degree or equivalent experience in an appropriate discipline Demonstrable knowledge of submarine design, commissioning, operation, safety/regulation and safety case architecture Specialist knowledge of Safety or Security in relation to complex systems The role is hybrid (a handful of times per month required on site) and can be based out of any of the following locations: Weymouth, Filton, Frimley, Portsmouth or Barrow . The salary is circa 50,000 plus benefits. You MUST be eligible for security clearance (SC) to be considered for this role.
Junior C&I Engineering Consultant Location: Bristol but other sites considered - Flexible hybrid working between office, client sites and home. Our Electrical Engineers undertake a range of projects across all sectors from civil nuclear sites and defence facilities to renewable energy and storage systems. The projects vary from small scoping and feasibility studies for modifications or upgrades to the design of complex process plants including nuclear power stations and COMAH sites. Our work often has a safety critical element and interfaces with other teams to deliver a multi-disciplinary service offering, managing these interfaces and effective communication internally and to clients is an essential element of this role. The candidate should have a technical project delivery background; with experience which should include at least one of the following: Delivery of innovation projects, taking new systems and technologies from concept through to acceptance. Managing the production, verification and approval of; Design justification reports, specifications, and detailed design drawings. Specialist equipment support, for example: generators, transformers, switchgear, cables. Client facing to develop requirements and negotiating contracts / agreements, and progress reporting and risk management. This is an exciting time to join our team and help support our electrical engineering services. There is a real opportunity for the role to offer a keen engineer professional development and the opportunity to learn new skills and services. Essential Requirements: MEng in Electronics and Electrical Engineering (Or equivalent) Have experience in the C&I discipline in particular relation to one of the following: Process Control Design (including Instrumentation selection, and production of detailed drawings) Development of design/substantiation deliverables PLC/SCADA Programming Functional Safety OT Cyber Security A readiness to learn new skills Desirable Requirements: It is to your advantage if you meet any of following additional requirements: Experience of working with the following platforms: Siemens TIA Portal/ Pilz PAS4000/ Rockwell Studio Logic/ AutoCAD Management of technical projects Customer facing experience and stakeholder management in an engineering environment. Understand or awareness of Cyber Security standards such as IEC 62443. Familiarity with change control and defect tracking tools and processes. Due to the nature of the work that we undertake, candidates will be required to undergo pre-employment screening and must be able to satisfy clearance criteria for UK National Security Vetting. Benefits We provide our people with a comprehensive benefits package that comprises: Happy To Talk Flexible Working Competitive salary 25 days' holiday entitlement Holiday purchase scheme Company pension scheme Targeted professional development Life assurance Private healthcare membership Bonus scheme linked into company performance Paid membership fees to a professional institution Support in attaining professional membership Cycle to work scheme Share purchase scheme Season rail ticket loan
Jan 06, 2026
Full time
Junior C&I Engineering Consultant Location: Bristol but other sites considered - Flexible hybrid working between office, client sites and home. Our Electrical Engineers undertake a range of projects across all sectors from civil nuclear sites and defence facilities to renewable energy and storage systems. The projects vary from small scoping and feasibility studies for modifications or upgrades to the design of complex process plants including nuclear power stations and COMAH sites. Our work often has a safety critical element and interfaces with other teams to deliver a multi-disciplinary service offering, managing these interfaces and effective communication internally and to clients is an essential element of this role. The candidate should have a technical project delivery background; with experience which should include at least one of the following: Delivery of innovation projects, taking new systems and technologies from concept through to acceptance. Managing the production, verification and approval of; Design justification reports, specifications, and detailed design drawings. Specialist equipment support, for example: generators, transformers, switchgear, cables. Client facing to develop requirements and negotiating contracts / agreements, and progress reporting and risk management. This is an exciting time to join our team and help support our electrical engineering services. There is a real opportunity for the role to offer a keen engineer professional development and the opportunity to learn new skills and services. Essential Requirements: MEng in Electronics and Electrical Engineering (Or equivalent) Have experience in the C&I discipline in particular relation to one of the following: Process Control Design (including Instrumentation selection, and production of detailed drawings) Development of design/substantiation deliverables PLC/SCADA Programming Functional Safety OT Cyber Security A readiness to learn new skills Desirable Requirements: It is to your advantage if you meet any of following additional requirements: Experience of working with the following platforms: Siemens TIA Portal/ Pilz PAS4000/ Rockwell Studio Logic/ AutoCAD Management of technical projects Customer facing experience and stakeholder management in an engineering environment. Understand or awareness of Cyber Security standards such as IEC 62443. Familiarity with change control and defect tracking tools and processes. Due to the nature of the work that we undertake, candidates will be required to undergo pre-employment screening and must be able to satisfy clearance criteria for UK National Security Vetting. Benefits We provide our people with a comprehensive benefits package that comprises: Happy To Talk Flexible Working Competitive salary 25 days' holiday entitlement Holiday purchase scheme Company pension scheme Targeted professional development Life assurance Private healthcare membership Bonus scheme linked into company performance Paid membership fees to a professional institution Support in attaining professional membership Cycle to work scheme Share purchase scheme Season rail ticket loan
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-in-Furness. This position will require a full-time presence on-site Salary: Competitive What you'll be doing: Developing the package of design evidence required to justify a safe, effective design and generate customer confidence in the design solution Specifying and assisting in the build of prototypes, products and systems suitable for testing Providing timely corrective actions on all assigned defects and issues Ensuring that commitments are agreed, reviewed and met Mentoring junior engineers regarding technical matters Making presentations effectively to technical and management audiences and within this, be able to identify and keep abreast of novel technical concepts and markets Author/co-author technical reports, papers, articles, patents and presentations as required Your skills and experiences: Educated to degree level in Engineering, Mechanical or Science subjects Be able to design documentation with the ability to present these to customers and wider groups Have the ability to solve complex engineering calculations Be proficient in CAD, MS Office and be comfortable with other IT applications Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Platform Systems team: Being part of a team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great opportunity career development. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 9th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 06, 2026
Full time
Job Title: Senior/Principal Platform Systems Mechanical Engineer Location: Barrow-in-Furness. This position will require a full-time presence on-site Salary: Competitive What you'll be doing: Developing the package of design evidence required to justify a safe, effective design and generate customer confidence in the design solution Specifying and assisting in the build of prototypes, products and systems suitable for testing Providing timely corrective actions on all assigned defects and issues Ensuring that commitments are agreed, reviewed and met Mentoring junior engineers regarding technical matters Making presentations effectively to technical and management audiences and within this, be able to identify and keep abreast of novel technical concepts and markets Author/co-author technical reports, papers, articles, patents and presentations as required Your skills and experiences: Educated to degree level in Engineering, Mechanical or Science subjects Be able to design documentation with the ability to present these to customers and wider groups Have the ability to solve complex engineering calculations Be proficient in CAD, MS Office and be comfortable with other IT applications Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Platform Systems team: Being part of a team, you will have a great opportunity to be involved in the planning and reactive support to ensure that the engineering aspects of testing and commissioning activities are undertaken in a safe and appropriate way whilst ensuring design intent are maintained. It's a fantastic opportunity to be a part of some of our most complex projects to date and to have great opportunity career development. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 9th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
What are the working hours? 40 hours per week - Monday to Friday, alternating by week between 8:00-16:00 and 16:00-midnight, with a 30-minute paid break per shift. What do we offer our HGV Technicians? From £18.00 per hour, dependent upon experience Overtime paid at an enhanced rate Paid breaks 30 days holiday per year, rising to 34 days with length of service Bonus scheme Optional private medical insurance and healthcare cash plan A comprehensive Scania training programme Enhanced employer pension contributions All required PPE 24/7 well-being and mental health support Brief description We are seeking a skilled and dedicated HGV Technician to join our Peterborough team. The successful candidate will be responsible for the maintenance and repair of heavy goods vehicles, ensuring they are safe and compliant with industry regulations and Scania standards. This role requires a strong mechanical aptitude, attention to detail, and the ability to work effectively both independently and as part of a team. What does the role involve? Carry out routine maintenance and repairs on all makes of vehicles and trailers to VOSA standard Diagnose and rectify all types of faults Ensure necessary paperwork is completed to the required standard and in a timely manner Maintain a high standard of cleanliness and tidiness and ensure all health and safety and environmental processes are adhered to Maintain a thorough and current product knowledge and attend relevant training courses Provide cover on rota system for breakdown cover, and to attend disabled vehicles at the roadside or at customer's premises What skills, qualifications and experience are we looking for? Level 3 City and Guilds, or NVQ qualification in a relevant field, or proven mechanical knowledge and experience in HGV maintenance Excellent customer care skills; able to deliver Scania's premium service standard at all times Strong problem-solving and IT skills with the ability to interpret technical documents and schematics Excellent attention to detail, high accuracy and numeracy skills, and a commitment to producing high-quality work A valid driving licence is preferred; HGV licence is an advantage but not mandatory Flexibility to undertake a wide range of tasks and work within Scania guidelines and to set deadlines Excellent communication and team working skills Own toolbox and tools Experience working with Scania products is desirable but not essential TruckEast is an equal opportunities employer. Job Types: Full-time, Permanent Pay: From £18.00 per hour Benefits: Company events Company pension Employee discount Free parking Life insurance On-site parking Private medical insurance Referral programme Experience: Mechanical engineering: 3 years (required) HGV: 3 years (required) Licence/Certification: Driving Licence (preferred) IRTEC (preferred) Work authorisation: United Kingdom (required) Work Location: In person
Jan 06, 2026
Full time
What are the working hours? 40 hours per week - Monday to Friday, alternating by week between 8:00-16:00 and 16:00-midnight, with a 30-minute paid break per shift. What do we offer our HGV Technicians? From £18.00 per hour, dependent upon experience Overtime paid at an enhanced rate Paid breaks 30 days holiday per year, rising to 34 days with length of service Bonus scheme Optional private medical insurance and healthcare cash plan A comprehensive Scania training programme Enhanced employer pension contributions All required PPE 24/7 well-being and mental health support Brief description We are seeking a skilled and dedicated HGV Technician to join our Peterborough team. The successful candidate will be responsible for the maintenance and repair of heavy goods vehicles, ensuring they are safe and compliant with industry regulations and Scania standards. This role requires a strong mechanical aptitude, attention to detail, and the ability to work effectively both independently and as part of a team. What does the role involve? Carry out routine maintenance and repairs on all makes of vehicles and trailers to VOSA standard Diagnose and rectify all types of faults Ensure necessary paperwork is completed to the required standard and in a timely manner Maintain a high standard of cleanliness and tidiness and ensure all health and safety and environmental processes are adhered to Maintain a thorough and current product knowledge and attend relevant training courses Provide cover on rota system for breakdown cover, and to attend disabled vehicles at the roadside or at customer's premises What skills, qualifications and experience are we looking for? Level 3 City and Guilds, or NVQ qualification in a relevant field, or proven mechanical knowledge and experience in HGV maintenance Excellent customer care skills; able to deliver Scania's premium service standard at all times Strong problem-solving and IT skills with the ability to interpret technical documents and schematics Excellent attention to detail, high accuracy and numeracy skills, and a commitment to producing high-quality work A valid driving licence is preferred; HGV licence is an advantage but not mandatory Flexibility to undertake a wide range of tasks and work within Scania guidelines and to set deadlines Excellent communication and team working skills Own toolbox and tools Experience working with Scania products is desirable but not essential TruckEast is an equal opportunities employer. Job Types: Full-time, Permanent Pay: From £18.00 per hour Benefits: Company events Company pension Employee discount Free parking Life insurance On-site parking Private medical insurance Referral programme Experience: Mechanical engineering: 3 years (required) HGV: 3 years (required) Licence/Certification: Driving Licence (preferred) IRTEC (preferred) Work authorisation: United Kingdom (required) Work Location: In person
Job Summary We are seeking a dedicated Quality Lead to joina successful and expanding uPVC window, door, and conservatory manufacturing business based in Norwich. The Quality Lead will work closely with Production Team Leaders and cross-functional teams to ensure full compliance with industry standards and company quality objectives. This role is central to maintaining product excellence, improving processes, and supporting continuous improvement across all stages of fabrication. Key Responsibilities Ensure compliance with all relevant quality standards including ISO 9001 , BS EN standards , PS24 Certification , CE marking , and other applicable industry requirements. Lead the implementation, monitoring, and ongoing improvement of quality control procedures throughout all stages of uPVC window and door fabrication. Conduct regular inspections and internal audits of raw materials, in-process work, and finished products to verify adherence to specifications. Develop, maintain, and update all quality documentation, including Standard Operating Procedures (SOPs) , work instructions, forms, and quality records. Identify and isolate non-conforming materials, ensuring timely resolution with suppliers and internal teams. Work collaboratively with Technical, Production, and Engineering teams to ensure product quality standards are fully embedded into daily operations. Maintain accurate quality records and produce performance metrics, trend data, and reports for review by the senior management team. Support root cause analysis and corrective actions to prevent recurring issues and drive continuous improvement initiatives. Essential Skills & Qualifications Proven experience in quality management within the uPVC window industry or a closely related manufacturing environment. Strong knowledge of ISO 9001 , BS EN requirements , and regulatory standards applicable to window and door manufacturing. Excellent communication skills with the ability to interpret and convey quality requirements to multi-functional teams. Experience with Six Sigma , continuous improvement methodologies, and root cause analysis tools. Strong attention to detail, analytical thinking, and a proactive approach to problem-solving.
Jan 06, 2026
Full time
Job Summary We are seeking a dedicated Quality Lead to joina successful and expanding uPVC window, door, and conservatory manufacturing business based in Norwich. The Quality Lead will work closely with Production Team Leaders and cross-functional teams to ensure full compliance with industry standards and company quality objectives. This role is central to maintaining product excellence, improving processes, and supporting continuous improvement across all stages of fabrication. Key Responsibilities Ensure compliance with all relevant quality standards including ISO 9001 , BS EN standards , PS24 Certification , CE marking , and other applicable industry requirements. Lead the implementation, monitoring, and ongoing improvement of quality control procedures throughout all stages of uPVC window and door fabrication. Conduct regular inspections and internal audits of raw materials, in-process work, and finished products to verify adherence to specifications. Develop, maintain, and update all quality documentation, including Standard Operating Procedures (SOPs) , work instructions, forms, and quality records. Identify and isolate non-conforming materials, ensuring timely resolution with suppliers and internal teams. Work collaboratively with Technical, Production, and Engineering teams to ensure product quality standards are fully embedded into daily operations. Maintain accurate quality records and produce performance metrics, trend data, and reports for review by the senior management team. Support root cause analysis and corrective actions to prevent recurring issues and drive continuous improvement initiatives. Essential Skills & Qualifications Proven experience in quality management within the uPVC window industry or a closely related manufacturing environment. Strong knowledge of ISO 9001 , BS EN requirements , and regulatory standards applicable to window and door manufacturing. Excellent communication skills with the ability to interpret and convey quality requirements to multi-functional teams. Experience with Six Sigma , continuous improvement methodologies, and root cause analysis tools. Strong attention to detail, analytical thinking, and a proactive approach to problem-solving.
Due to an internal promotion, we now require an additional Manufacturing Assembly Operative to join our well established team. Working from our modern site at Yateley as part of our professional and friendly manufacturing teams across the site. We are a well respected international engineering and manufacturing company who supply customers worldwide with a range of products. We can offer a flexible working pattern, free parking, 25 days holiday plus bank holidays and a holiday purchase scheme, a full benefits package including health insurance and a generous pension scheme plus a generous salary and yearly bonus scheme too, along with a range of staff well being incentives. We can also offer paid overtime if desired due to our ongoing success. The role would suit candidates with previous manufacturing production or assembly experience within an engineering, electronic, electrical or similar environment where you have gained soldering, cable assembly, mechanical assembly, wiring or crimping skills and whereby you can work from a technical drawing. Our teams build the full range of our products within recommended assembly build times and are ensuring the highest level of quality standards throughout the production process. To assemble the constituent parts of the products from pcb level through sub assembly to finished units, following Company engineering drawings. (In-house pcb level assembly is limited with the majority of pcb s being externally supplied). To understand and build to wiring schedules, using appropriate meters, where required, to check assembled work. To highlight any specification or design error through the Cell Co-ordinators or Departmental Manager or directly with the Production Engineering team. To ensure all activities are completed in accordance with current Quality System procedures and standards and, wherever possible, within recommended times specified on the Company ERP system. To raise the appropriate levels of non-conformance reports ie Observation Reports, Engineering Change requests etc in compliance with the Company Quality System requirements and Departmental guidelines. To establish effective working relations with all departments, ie Production Engineering, Stores, Quality etc to ensure maximum co-operation for the timely resolution of assembly related issues. To provide assistance and support to other Assembly staff when requested, to complete specific activities. To understand and follow all Manufacturing Department administrative procedures and maintain records via the systems provided. To understand and use Company IT resources, ie Intranet, ERP system in support of day-to-day activities such as part enquiries, stock search, etc. The role would suit candidates with proven experience in a manufacturing assembly role ideally with experience of using production equipment such as soldering irons and crimps for cable and mechanical assembly, with any surface mount experience being an advantage but not essential. You should have the ability to interpret engineering drawings and any ERP system experience is an advantage too. In return we can offer the opportunity to join a well established and secure company offering a generous salary plus annual bonus, full benefits, 25 days holiday and on site parking working form our modern premises for a successful international company. We also offer a range of staff incentives and additional well being benefits. Please submit your CV asap for immediate consideration.
Jan 06, 2026
Full time
Due to an internal promotion, we now require an additional Manufacturing Assembly Operative to join our well established team. Working from our modern site at Yateley as part of our professional and friendly manufacturing teams across the site. We are a well respected international engineering and manufacturing company who supply customers worldwide with a range of products. We can offer a flexible working pattern, free parking, 25 days holiday plus bank holidays and a holiday purchase scheme, a full benefits package including health insurance and a generous pension scheme plus a generous salary and yearly bonus scheme too, along with a range of staff well being incentives. We can also offer paid overtime if desired due to our ongoing success. The role would suit candidates with previous manufacturing production or assembly experience within an engineering, electronic, electrical or similar environment where you have gained soldering, cable assembly, mechanical assembly, wiring or crimping skills and whereby you can work from a technical drawing. Our teams build the full range of our products within recommended assembly build times and are ensuring the highest level of quality standards throughout the production process. To assemble the constituent parts of the products from pcb level through sub assembly to finished units, following Company engineering drawings. (In-house pcb level assembly is limited with the majority of pcb s being externally supplied). To understand and build to wiring schedules, using appropriate meters, where required, to check assembled work. To highlight any specification or design error through the Cell Co-ordinators or Departmental Manager or directly with the Production Engineering team. To ensure all activities are completed in accordance with current Quality System procedures and standards and, wherever possible, within recommended times specified on the Company ERP system. To raise the appropriate levels of non-conformance reports ie Observation Reports, Engineering Change requests etc in compliance with the Company Quality System requirements and Departmental guidelines. To establish effective working relations with all departments, ie Production Engineering, Stores, Quality etc to ensure maximum co-operation for the timely resolution of assembly related issues. To provide assistance and support to other Assembly staff when requested, to complete specific activities. To understand and follow all Manufacturing Department administrative procedures and maintain records via the systems provided. To understand and use Company IT resources, ie Intranet, ERP system in support of day-to-day activities such as part enquiries, stock search, etc. The role would suit candidates with proven experience in a manufacturing assembly role ideally with experience of using production equipment such as soldering irons and crimps for cable and mechanical assembly, with any surface mount experience being an advantage but not essential. You should have the ability to interpret engineering drawings and any ERP system experience is an advantage too. In return we can offer the opportunity to join a well established and secure company offering a generous salary plus annual bonus, full benefits, 25 days holiday and on site parking working form our modern premises for a successful international company. We also offer a range of staff incentives and additional well being benefits. Please submit your CV asap for immediate consideration.
Senior Manufacturing Engineer 6 month contract Based in Ampthill Offering 50ph Inside IR35 Do you have experience with 5 Axis CNC Machining? Do you have experience of MRP Systems and managing BOMs? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Senior Manufacturing Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Develop manufacturing processes Medium /Large CNC machined components Defining sequence of operations, procedures, and production layouts for assemblies, equipment installation, processing and material handling Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines Identifying any new tooling & fixturing requirements Experienced in the creation of Technical Requirement Specifications Creation of detailed process instructions Creation of Manufacturing BOM's / routings to aid ease of manufacture Active involvement in the Level 1 & 2 Mission Directed Work Team meetings Support and contribute relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance Close liaison of activities with Industrial Engineering, Production Engineering and other functions Support with the business process reviews and generation / update of relevant documentation Your skillset may include: Experience with 5 axis CNC machining and the Hyper-Mill Cam system Experience with CAD software for generating 2D technical drawings Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems) Proven ability to drive cultural and process change, improving efficiency and quality A collaborative mindset with a passion for continuous improvement If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Senior Manufacturing Engineer 6 month contract Based in Ampthill Offering 50ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Jan 06, 2026
Contractor
Senior Manufacturing Engineer 6 month contract Based in Ampthill Offering 50ph Inside IR35 Do you have experience with 5 Axis CNC Machining? Do you have experience of MRP Systems and managing BOMs? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Senior Manufacturing Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Develop manufacturing processes Medium /Large CNC machined components Defining sequence of operations, procedures, and production layouts for assemblies, equipment installation, processing and material handling Providing Basis of Estimates for engineering activities and shop floor operations across a range of technologies and disciplines Identifying any new tooling & fixturing requirements Experienced in the creation of Technical Requirement Specifications Creation of detailed process instructions Creation of Manufacturing BOM's / routings to aid ease of manufacture Active involvement in the Level 1 & 2 Mission Directed Work Team meetings Support and contribute relevant section of the Technology Roadmap to identify improvements to current manufacturing processes and future requirements Assist with the Technical requirements of the relevant section of the Capital plan from definition to acceptance Close liaison of activities with Industrial Engineering, Production Engineering and other functions Support with the business process reviews and generation / update of relevant documentation Your skillset may include: Experience with 5 axis CNC machining and the Hyper-Mill Cam system Experience with CAD software for generating 2D technical drawings Solid understanding of MRP systems and experience managing BOMs and routings in SAP (or similar ERP systems) Proven ability to drive cultural and process change, improving efficiency and quality A collaborative mindset with a passion for continuous improvement If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Senior Manufacturing Engineer 6 month contract Based in Ampthill Offering 50ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.
Our client, a leading defence and security company, is seeking an experienced Integration & Systems Validation Engineer - Actuators to join their newly established ISV team. This team is dedicated to proving Actuator products in extreme environmental and electro-magnetic conditions. Key Responsibilities: Manage and coordinate all aspects of the Actuator under test, ensuring timely availability and logistics of all hardware, software, and test equipment needed. Design bespoke test setups, specifying necessary instrumentation and stimuli to accurately capture data during trials. Lead trials readiness reviews, ensuring all test hardware, software, and facilities are prepared and all safety aspects are assessed and documented. Support the physical test setup and work-up in specialised facilities such as temperature and shaker chambers, and EMC anechoic and reverberation chambers. Produce accurate logs of all trial activities and raise issues in a timely and detailed manner. Meticulously analyse trial data to verify that the actuator meets its stringent requirements. Author comprehensive trial conduct reports to support the product's development and certification. Provide critical data and reports to support the formal certification of actuator products for use. Act as the primary interface with facility personnel and wider project stakeholders, ensuring seamless communication and coordination throughout trials. Manage a small team of talented ISV engineers as the team grows, developing their skills and driving results. Job Requirements: Hands-on engineer with a passion for testing systems. Dynamic and proactive individual who can manage their workload. Strong understanding of engineering principles across mechanical, electrical, and radio-frequency domains. Experience in environmental or EMC trials is highly advantageous. Keen eye for detail and a methodical approach to planning, executing, and documenting technical activities. Excellent communication skills to interface effectively with technical experts, facility personnel, and management. Confidence in processing, analysing, and reporting on complex technical data. Inquisitive nature and a creative approach to problem-solving in complex and challenging scenarios. Growth mindset with the ability to shape, improve, and progress test and proving approaches and methodologies. Benefits: Up to 2,500 company bonus based on performance Maximum total pension contribution of up to 14% Opportunity for paid overtime Up to 15 additional Flexi Leave days Flexible working arrangements Enhanced parental leave for maternity, adoption, and shared parental leave Fantastic site facilities including subsidised meals and free car parking Healthcare Cash Plan for reclaiming everyday healthcare expenses If you are a practically minded engineer looking for a challenging opportunity to grow within a dynamic team and shape the future of actuator systems proving, we encourage you to apply now.
Jan 06, 2026
Full time
Our client, a leading defence and security company, is seeking an experienced Integration & Systems Validation Engineer - Actuators to join their newly established ISV team. This team is dedicated to proving Actuator products in extreme environmental and electro-magnetic conditions. Key Responsibilities: Manage and coordinate all aspects of the Actuator under test, ensuring timely availability and logistics of all hardware, software, and test equipment needed. Design bespoke test setups, specifying necessary instrumentation and stimuli to accurately capture data during trials. Lead trials readiness reviews, ensuring all test hardware, software, and facilities are prepared and all safety aspects are assessed and documented. Support the physical test setup and work-up in specialised facilities such as temperature and shaker chambers, and EMC anechoic and reverberation chambers. Produce accurate logs of all trial activities and raise issues in a timely and detailed manner. Meticulously analyse trial data to verify that the actuator meets its stringent requirements. Author comprehensive trial conduct reports to support the product's development and certification. Provide critical data and reports to support the formal certification of actuator products for use. Act as the primary interface with facility personnel and wider project stakeholders, ensuring seamless communication and coordination throughout trials. Manage a small team of talented ISV engineers as the team grows, developing their skills and driving results. Job Requirements: Hands-on engineer with a passion for testing systems. Dynamic and proactive individual who can manage their workload. Strong understanding of engineering principles across mechanical, electrical, and radio-frequency domains. Experience in environmental or EMC trials is highly advantageous. Keen eye for detail and a methodical approach to planning, executing, and documenting technical activities. Excellent communication skills to interface effectively with technical experts, facility personnel, and management. Confidence in processing, analysing, and reporting on complex technical data. Inquisitive nature and a creative approach to problem-solving in complex and challenging scenarios. Growth mindset with the ability to shape, improve, and progress test and proving approaches and methodologies. Benefits: Up to 2,500 company bonus based on performance Maximum total pension contribution of up to 14% Opportunity for paid overtime Up to 15 additional Flexi Leave days Flexible working arrangements Enhanced parental leave for maternity, adoption, and shared parental leave Fantastic site facilities including subsidised meals and free car parking Healthcare Cash Plan for reclaiming everyday healthcare expenses If you are a practically minded engineer looking for a challenging opportunity to grow within a dynamic team and shape the future of actuator systems proving, we encourage you to apply now.
Our client, a leader in the defence and security sector, is currently seeking an Integration & Systems Validation Engineer to join their Integration and Systems Validation (ISV) team within the Weapon System Simulation and Experimentation (WSSE) department. This is a permanent role situated in a dynamic and growing area focusing on driving innovation and excellence in systems integration and testing for digital simulation and experimentation products. Key Responsibilities: Reporting to the ISV in WSSE Team Lead, you will be responsible for: Test/Proving Planning Understanding customer needs/requirements from a proving perspective Understanding design/architecture including input to test bed needs Test planning, design, and specification Test/Proving Conduct Regular progressive assurance testing during software development Supporting technical investigations into defects and emergent behaviours Supporting external software integration with other engineering partners and customers Data analysis of logs Conducting formal qualification Test/Proving Reporting Regular reporting to project lead and stakeholders on software functionality Writing test/analysis reports for certification Support to software delivery/release process including certification Job Requirements: Understanding of systems proving and knowledge of how to test and certify complex systems throughout the development lifecycle Experience in functional and/or software testing, and verification and validation (V&V) knowledge Proficiency in tools like GitLab, Jenkins, Python scripting, IBM ALM ETM/Doors, PLM, JIRA, Excel, and basic Macros Ability to understand different levels of the system and the different stakeholder's perspectives Dynamic and proactive approach with strong self-management skills Experience in monitoring the achievement of milestones and targets, identifying risks, and producing contingency plans Benefits: Company bonus: Up to 2,500 (based on company performance) Pension: Maximum total (employer and employee) contribution of up to 14% Opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working arrangements Enhanced parental leave: Up to 26 weeks for maternity, adoption, and shared parental leave Fantastic site facilities including subsidised meals, free car parking and more Healthcare Cash Plan: Claim cashback on everyday healthcare expenses If you are an experienced Integration & Systems Validation Engineer seeking a new opportunity to advance your career in the defence and security sector, we would love to hear from you. Apply now to join our client's innovative and collaborative team.
Jan 06, 2026
Full time
Our client, a leader in the defence and security sector, is currently seeking an Integration & Systems Validation Engineer to join their Integration and Systems Validation (ISV) team within the Weapon System Simulation and Experimentation (WSSE) department. This is a permanent role situated in a dynamic and growing area focusing on driving innovation and excellence in systems integration and testing for digital simulation and experimentation products. Key Responsibilities: Reporting to the ISV in WSSE Team Lead, you will be responsible for: Test/Proving Planning Understanding customer needs/requirements from a proving perspective Understanding design/architecture including input to test bed needs Test planning, design, and specification Test/Proving Conduct Regular progressive assurance testing during software development Supporting technical investigations into defects and emergent behaviours Supporting external software integration with other engineering partners and customers Data analysis of logs Conducting formal qualification Test/Proving Reporting Regular reporting to project lead and stakeholders on software functionality Writing test/analysis reports for certification Support to software delivery/release process including certification Job Requirements: Understanding of systems proving and knowledge of how to test and certify complex systems throughout the development lifecycle Experience in functional and/or software testing, and verification and validation (V&V) knowledge Proficiency in tools like GitLab, Jenkins, Python scripting, IBM ALM ETM/Doors, PLM, JIRA, Excel, and basic Macros Ability to understand different levels of the system and the different stakeholder's perspectives Dynamic and proactive approach with strong self-management skills Experience in monitoring the achievement of milestones and targets, identifying risks, and producing contingency plans Benefits: Company bonus: Up to 2,500 (based on company performance) Pension: Maximum total (employer and employee) contribution of up to 14% Opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working arrangements Enhanced parental leave: Up to 26 weeks for maternity, adoption, and shared parental leave Fantastic site facilities including subsidised meals, free car parking and more Healthcare Cash Plan: Claim cashback on everyday healthcare expenses If you are an experienced Integration & Systems Validation Engineer seeking a new opportunity to advance your career in the defence and security sector, we would love to hear from you. Apply now to join our client's innovative and collaborative team.
An opportunity has arisen with my client for a Principal Mechanical Design Engineer to join them on a 12 -month contract. As the Principal Mechanical Design Engineer you will develop products to meet customer's needs. You will perform a range of engineering activities including progressing developmental designs into production environments and working with suppliers on technical queries. Role: Principal Mechanical Design Engineer Pay: 50 per hour via umbrella Location: Stevenage Contract: 12 months Hours: Monday - Friday, 37 hours per week Security Clearance: Security Cleared however can start on BPSS Carry out Mechanical Design and proving activities as part of a wider team for prime and variant products, of both piece parts and assemblies. Support/liaise with manufacturing, resolving manufacturing problems & defects. Support to functional & environmental testing and trials. Liaise with suppliers/purchasing to resolve any technical queries that may arise. Planning and reporting on own day-to-day activities to meet project milestones. Gain clarification of and help to generate requirements, including challenging of extraneous requirements to reduce lead time, UPC and design complexity Skills/Experince Experience using Creo 3D design tool An appreciation of other engineering areas/domains Knowledge of several of the following: Manufacturing processes Tolerance studies Environmental test Mass property calculations Material selection FMEA Design for Manufacture/Assembly Environmental Gasket Sealing Structural design Defence Standards Review processes Product Lifecycles Industrial validation An ability to work as part of a multifunctional engineering team and be able to partake in or host design reviews. For this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Jan 06, 2026
Contractor
An opportunity has arisen with my client for a Principal Mechanical Design Engineer to join them on a 12 -month contract. As the Principal Mechanical Design Engineer you will develop products to meet customer's needs. You will perform a range of engineering activities including progressing developmental designs into production environments and working with suppliers on technical queries. Role: Principal Mechanical Design Engineer Pay: 50 per hour via umbrella Location: Stevenage Contract: 12 months Hours: Monday - Friday, 37 hours per week Security Clearance: Security Cleared however can start on BPSS Carry out Mechanical Design and proving activities as part of a wider team for prime and variant products, of both piece parts and assemblies. Support/liaise with manufacturing, resolving manufacturing problems & defects. Support to functional & environmental testing and trials. Liaise with suppliers/purchasing to resolve any technical queries that may arise. Planning and reporting on own day-to-day activities to meet project milestones. Gain clarification of and help to generate requirements, including challenging of extraneous requirements to reduce lead time, UPC and design complexity Skills/Experince Experience using Creo 3D design tool An appreciation of other engineering areas/domains Knowledge of several of the following: Manufacturing processes Tolerance studies Environmental test Mass property calculations Material selection FMEA Design for Manufacture/Assembly Environmental Gasket Sealing Structural design Defence Standards Review processes Product Lifecycles Industrial validation An ability to work as part of a multifunctional engineering team and be able to partake in or host design reviews. For this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. " on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the tag at anytime! Thank you for your follow!"
Job Title: Team Lead - Detail Design Salary: Up to £49,433 dependent on skills and experience Location: Scotstoun - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: This position profile describes the first level of line management in the Detail Design discipline, the role holder will typically lead small to medium sized teams of Detail Design resources to deliver distributed scope this could be sub-dicipline specific or multi-discipline environment As a Team Lead within Detail Design the role holder will be responsible for working with Engineering Management to develop localised project delivery plans and manage delivery thereof The role holder will be accountable for all aspects of people management in their team including but not limited to coaching, mentoring, absence management , performance reviews and setting development plans Your skills and experiences: Competent in processes, procedures and standards related to area of technical expertise People management , motivation, performance coaching, and performance management Would be desirable if post holder has EngTech status or working towards IEng status (UK) Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. Our Detail Design Team: Detail Design specialises in the art of 3D CAD integration, and production of Engineering outputs, primarily in the form of drawings. They are also deployed in other parts of engineering as technical support to engineers or as part of a systems engineering team that has focus on the integration of engineering toolsets such as CAD/PDM/ERM tools. Detail Design is one of the largest engineering disciplines at Naval Ships and covers a wide range of delivery focused engineering tasks. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 9th January 2026 - Interviews will take place w/c 26th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Jan 06, 2026
Full time
Job Title: Team Lead - Detail Design Salary: Up to £49,433 dependent on skills and experience Location: Scotstoun - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role What you'll be doing: This position profile describes the first level of line management in the Detail Design discipline, the role holder will typically lead small to medium sized teams of Detail Design resources to deliver distributed scope this could be sub-dicipline specific or multi-discipline environment As a Team Lead within Detail Design the role holder will be responsible for working with Engineering Management to develop localised project delivery plans and manage delivery thereof The role holder will be accountable for all aspects of people management in their team including but not limited to coaching, mentoring, absence management , performance reviews and setting development plans Your skills and experiences: Competent in processes, procedures and standards related to area of technical expertise People management , motivation, performance coaching, and performance management Would be desirable if post holder has EngTech status or working towards IEng status (UK) Engineers at all levels should possess an academic qualification in Engineering or other related STEM subjects as well as specific (either academic or professional) qualifications and become recognised as Incorporated or Chartered Engineers through an appropriate recognised professional institution. Engineers are encouraged, and will be supported, to achieve the relevant accreditation. Preference will be given to candidates who are already professionally registered. Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. Our Detail Design Team: Detail Design specialises in the art of 3D CAD integration, and production of Engineering outputs, primarily in the form of drawings. They are also deployed in other parts of engineering as technical support to engineers or as part of a systems engineering team that has focus on the integration of engineering toolsets such as CAD/PDM/ERM tools. Detail Design is one of the largest engineering disciplines at Naval Ships and covers a wide range of delivery focused engineering tasks. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date : 9th January 2026 - Interviews will take place w/c 26th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Our client, a global Aerospace systems manufacturer, is seeking an Electrical/Electro Mechanical Project Engineer to join their dynamic engineering team based in Slough. This is a fantastic opportunity to play a pivotal role in the design, development, and delivery of innovative electrical and mechanical products that support cutting-edge aerospace applications. You ll be responsible for leading new product development projects from concept through to delivery ensuring projects are delivered on time, on budget, and to specification. Working closely with cross-functional teams, you ll bring together technical design expertise, project management capability, and a passion for problem-solving in a fast-paced, high-precision environment. Key Responsibilities Lead and support engineering development projects in line with company strategy and customer requirements. Manage New Product Introduction (NPI) activities using structured engineering processes. Define project objectives, create detailed project plans, and manage work packages to deliver key milestones. Produce and maintain technical documentation, project dashboards, and progress reports. Design and develop mechanical and electrical components using CATIA or similar CAD tools. Conduct Failure Mode and Effects Analysis (FMEA) and implement corrective actions. Apply design for manufacture, design to cost, and design for inspection principles. Liaise with internal teams, suppliers, and customers to resolve technical challenges. Support R&D initiatives and contribute to new product concepts and technology roadmaps. Ensure compliance with quality, health & safety, and environmental standards. Occasional travel to customer and supplier sites in the UK and overseas. About You Degree qualified in Mechanical, Electrical, or Electro-Mechanical Engineering (or equivalent experience). Proven experience in project or design engineering within a manufacturing or aerospace environment. Strong understanding of mechanical and electrical design principles . Skilled in CAD tools (CATIA, SolidWorks, or equivalent). Experienced in project progress reporting, RFQs, and technical documentation. Excellent communication and organisational skills, with the ability to manage multiple priorities. Knowledge of aerospace industry standards and interconnect products (advantageous). Flexible to occasionally travel within the UK and internationally. What s on Offer Competitive salary and benefits package. Opportunity to work with a globally recognised engineering brand. Structured career development and professional training. Collaborative and innovative working environment.
Jan 06, 2026
Full time
Our client, a global Aerospace systems manufacturer, is seeking an Electrical/Electro Mechanical Project Engineer to join their dynamic engineering team based in Slough. This is a fantastic opportunity to play a pivotal role in the design, development, and delivery of innovative electrical and mechanical products that support cutting-edge aerospace applications. You ll be responsible for leading new product development projects from concept through to delivery ensuring projects are delivered on time, on budget, and to specification. Working closely with cross-functional teams, you ll bring together technical design expertise, project management capability, and a passion for problem-solving in a fast-paced, high-precision environment. Key Responsibilities Lead and support engineering development projects in line with company strategy and customer requirements. Manage New Product Introduction (NPI) activities using structured engineering processes. Define project objectives, create detailed project plans, and manage work packages to deliver key milestones. Produce and maintain technical documentation, project dashboards, and progress reports. Design and develop mechanical and electrical components using CATIA or similar CAD tools. Conduct Failure Mode and Effects Analysis (FMEA) and implement corrective actions. Apply design for manufacture, design to cost, and design for inspection principles. Liaise with internal teams, suppliers, and customers to resolve technical challenges. Support R&D initiatives and contribute to new product concepts and technology roadmaps. Ensure compliance with quality, health & safety, and environmental standards. Occasional travel to customer and supplier sites in the UK and overseas. About You Degree qualified in Mechanical, Electrical, or Electro-Mechanical Engineering (or equivalent experience). Proven experience in project or design engineering within a manufacturing or aerospace environment. Strong understanding of mechanical and electrical design principles . Skilled in CAD tools (CATIA, SolidWorks, or equivalent). Experienced in project progress reporting, RFQs, and technical documentation. Excellent communication and organisational skills, with the ability to manage multiple priorities. Knowledge of aerospace industry standards and interconnect products (advantageous). Flexible to occasionally travel within the UK and internationally. What s on Offer Competitive salary and benefits package. Opportunity to work with a globally recognised engineering brand. Structured career development and professional training. Collaborative and innovative working environment.
is working with an established engineering firm specialising in the design and manufacture of high-performance air handling and environmental control systems. Their equipment is used across a range of demanding industrial and technical sectors, delivering precision-engineered solutions for complex humidity and temperature management challenges. About the role: This is a hands-on design position that covers the full lifecycle of engineered systems, from initial concept through to production and commissioning. You will work closely with colleagues across engineering, projects, and production to turn design concepts into real-world solutions that perform in challenging industrial environments. You will take ownership of varied projects, ensuring every system is designed for optimum performance, reliability, and manufacturability. The role combines technical design, system integration, and practical involvement throughout project delivery. Key Responsibilities: Develop detailed mechanical designs for custom-built environmental and airflow systems using modern CAD platforms. Carry out system performance checks, including airflow and heat transfer calculations, to validate design intent. Select suitable mechanical and electrical components to achieve required system functionality and efficiency. Create detailed production drawings, assembly diagrams, and supporting documentation for manufacturing. Assist with technical documentation and compliance activities relating to safety and performance standards. Support on-site installation and commissioning activities where required (predominantly UK-based, with occasional overseas opportunities). What we re looking for: Background and experience designing HVAC systems, ducting, building services etc Proficient with SolidWorks or Inventor Flexibility to travel to site when required, nationwide with potential for international travel. How to apply: To apply for the Design Engineer role, please apply above or alternatively call a member of the team at is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation.
Jan 06, 2026
Full time
is working with an established engineering firm specialising in the design and manufacture of high-performance air handling and environmental control systems. Their equipment is used across a range of demanding industrial and technical sectors, delivering precision-engineered solutions for complex humidity and temperature management challenges. About the role: This is a hands-on design position that covers the full lifecycle of engineered systems, from initial concept through to production and commissioning. You will work closely with colleagues across engineering, projects, and production to turn design concepts into real-world solutions that perform in challenging industrial environments. You will take ownership of varied projects, ensuring every system is designed for optimum performance, reliability, and manufacturability. The role combines technical design, system integration, and practical involvement throughout project delivery. Key Responsibilities: Develop detailed mechanical designs for custom-built environmental and airflow systems using modern CAD platforms. Carry out system performance checks, including airflow and heat transfer calculations, to validate design intent. Select suitable mechanical and electrical components to achieve required system functionality and efficiency. Create detailed production drawings, assembly diagrams, and supporting documentation for manufacturing. Assist with technical documentation and compliance activities relating to safety and performance standards. Support on-site installation and commissioning activities where required (predominantly UK-based, with occasional overseas opportunities). What we re looking for: Background and experience designing HVAC systems, ducting, building services etc Proficient with SolidWorks or Inventor Flexibility to travel to site when required, nationwide with potential for international travel. How to apply: To apply for the Design Engineer role, please apply above or alternatively call a member of the team at is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation.
Overview We are Seeking Contracts Manager/CSA Lead to join our data Centre team in Oxfordshire. The Contracts Manager/CSA Lead is the senior on-site leader with overall responsibility for the successful delivery, quality, safety, and financial performance of civil engineering projects. The role ensures full coordination of all aspects of the contract and that client expectations are met or exceeded. The Contracts Manager/CSA Lead upholds the highest standards in line with Sisk's HSEQS policies and procedures while seeking opportunities to enhance project value and profitability. John Sisk & Son have been building excellence as a family-owned international construction company by offering trust, certainty and value to our clients whilst being at the heart of change. Responsibilities Preconstruction Develop and manage the contract programme, often in collaboration with the Estimating team during tender stage. Instruct the QS on all major preliminary expenditure including plant, accommodation, and temporary works. Chair project start-up and production meetings, supporting resource allocation alongside the Regional Director. Oversee the subcontract buying schedule in partnership with the QS. Notify statutory authorities and stakeholders of site commencement. Draft preliminary sitelogisticsand temporary works registers, integrating initial Health & Safety considerations. Attend Design Team Progress Meetings, providing updates and technical input. Lead the preparation of project programmes, method statements, and contract submissions. Construction & Delivery Project Execution Planning (PEP) Risk management Commercial performance HSEQS compliance Stakeholder engagement Design management Project administration and close-out. Ensure the project team and supply chain possessthe required competencies to meet HSEQS requirements. Monitor overall site progress against programme, liaising with subcontractors and Site Management. Review buildability and explore commercial or programme improvements where possible. Protect Sisk's contractual position throughtimelycorrespondence, notices, and documentation. Oversee site presentation and promote the company's image through professional site management. Manage project information flows, document control, and scheduling. Manage consultant and subcontractor design coordination including BIM delivery as contractually required. Implement andmaintainthe Project Execution Plan (PEP), with special focus on HSE and Quality compliance. Prepare and deliveraccurateCost Value Reconciliations (CVRs) and monthly project reports. Drivetimelyachievement of Practical Completion and ensure proactive issue resolution onsite. Subcontractor & Commercial Management Lead subcontractorselection, progress meetings, pre-order meetings, and performance monitoring. Oversee the work of the Quantity Surveyor (QS) and Site Manager (SM). Manage subcontractor performance and site productivity to ensure project milestones are achieved. Review and approve expenditure, subcontractor appointments, commercial reports, and financial control measures Pre Construction & Close out Lead defect management and ensuretimelycompletion of the Certificate of Making Good Defects. Instruct QS in loss and expense applications and support Final Account preparations. Oversee final commissioning, client handover, and aftercare services. Drive continuous improvement and lessons learned into future project delivery. Conduct Performance Development Plans (PDPs) with direct reports to foster individual growth and development. Experience Essential Significant experiencein commercial systems management or estimating support within construction Knowledge of estimating software such as Conquest,CostXor similar Excellent communication, influencing and stakeholder management skills Ability to prepareaccuratecontractual correspondence and reports under tight timelines Knowledge of design and build processes and delivery planning for multi-disciplinary teams Strong IT literacy and systems capability Analytical and numerate with attention to detail Excellent communication skills and ability to support non-technical users Ability to work independently and manage multiple projects Strong organisational and time-management skills Desirable Familiarity with procurement and contract management systems Exposure to tender preparation, riskmanagementand cost control processes Qualifications Essential Degree or equivalent in Construction, Engineering, BusinessSystemsor related discipline Knowledge of commercial and estimating processes within construction Desirable: Experience with database management or reporting tools Training in project controls or commercial systems implementation Additional Information Competitive salary 26 days annual leave plus additional company days Pension and benefits Unlimited learning and development opportunities Much more Our People and Recruitment Commitment At Sisk Group our people are at the heart of our success. We offer the chance to work with purpose, build a career with no limits and be part of a great team. All vacancies are managed directly by our Internal Recruitment Team. Unsolicited contact or speculative CVs from unapproved agencies will not be accepted and no introductory fees will apply. We are an equal opportunities employer. We welcome applications from all qualified candidates regardless of gender, race, ethnicity, disability, age, sexual orientation, religion or any other protected characteristic. Reasonable adjustments are available during the recruitment process We know the confidence gap and imposter phenomenon can stop talented candidates applying. You do not need to meet every criterion - your skills and potential matter. Don't hold back we want to hear from you All recruitment materials comply with legal and regulatory requirements including the EU Pay Transparency Directive and the Equality Acts UK and Ireland
Jan 06, 2026
Full time
Overview We are Seeking Contracts Manager/CSA Lead to join our data Centre team in Oxfordshire. The Contracts Manager/CSA Lead is the senior on-site leader with overall responsibility for the successful delivery, quality, safety, and financial performance of civil engineering projects. The role ensures full coordination of all aspects of the contract and that client expectations are met or exceeded. The Contracts Manager/CSA Lead upholds the highest standards in line with Sisk's HSEQS policies and procedures while seeking opportunities to enhance project value and profitability. John Sisk & Son have been building excellence as a family-owned international construction company by offering trust, certainty and value to our clients whilst being at the heart of change. Responsibilities Preconstruction Develop and manage the contract programme, often in collaboration with the Estimating team during tender stage. Instruct the QS on all major preliminary expenditure including plant, accommodation, and temporary works. Chair project start-up and production meetings, supporting resource allocation alongside the Regional Director. Oversee the subcontract buying schedule in partnership with the QS. Notify statutory authorities and stakeholders of site commencement. Draft preliminary sitelogisticsand temporary works registers, integrating initial Health & Safety considerations. Attend Design Team Progress Meetings, providing updates and technical input. Lead the preparation of project programmes, method statements, and contract submissions. Construction & Delivery Project Execution Planning (PEP) Risk management Commercial performance HSEQS compliance Stakeholder engagement Design management Project administration and close-out. Ensure the project team and supply chain possessthe required competencies to meet HSEQS requirements. Monitor overall site progress against programme, liaising with subcontractors and Site Management. Review buildability and explore commercial or programme improvements where possible. Protect Sisk's contractual position throughtimelycorrespondence, notices, and documentation. Oversee site presentation and promote the company's image through professional site management. Manage project information flows, document control, and scheduling. Manage consultant and subcontractor design coordination including BIM delivery as contractually required. Implement andmaintainthe Project Execution Plan (PEP), with special focus on HSE and Quality compliance. Prepare and deliveraccurateCost Value Reconciliations (CVRs) and monthly project reports. Drivetimelyachievement of Practical Completion and ensure proactive issue resolution onsite. Subcontractor & Commercial Management Lead subcontractorselection, progress meetings, pre-order meetings, and performance monitoring. Oversee the work of the Quantity Surveyor (QS) and Site Manager (SM). Manage subcontractor performance and site productivity to ensure project milestones are achieved. Review and approve expenditure, subcontractor appointments, commercial reports, and financial control measures Pre Construction & Close out Lead defect management and ensuretimelycompletion of the Certificate of Making Good Defects. Instruct QS in loss and expense applications and support Final Account preparations. Oversee final commissioning, client handover, and aftercare services. Drive continuous improvement and lessons learned into future project delivery. Conduct Performance Development Plans (PDPs) with direct reports to foster individual growth and development. Experience Essential Significant experiencein commercial systems management or estimating support within construction Knowledge of estimating software such as Conquest,CostXor similar Excellent communication, influencing and stakeholder management skills Ability to prepareaccuratecontractual correspondence and reports under tight timelines Knowledge of design and build processes and delivery planning for multi-disciplinary teams Strong IT literacy and systems capability Analytical and numerate with attention to detail Excellent communication skills and ability to support non-technical users Ability to work independently and manage multiple projects Strong organisational and time-management skills Desirable Familiarity with procurement and contract management systems Exposure to tender preparation, riskmanagementand cost control processes Qualifications Essential Degree or equivalent in Construction, Engineering, BusinessSystemsor related discipline Knowledge of commercial and estimating processes within construction Desirable: Experience with database management or reporting tools Training in project controls or commercial systems implementation Additional Information Competitive salary 26 days annual leave plus additional company days Pension and benefits Unlimited learning and development opportunities Much more Our People and Recruitment Commitment At Sisk Group our people are at the heart of our success. We offer the chance to work with purpose, build a career with no limits and be part of a great team. All vacancies are managed directly by our Internal Recruitment Team. Unsolicited contact or speculative CVs from unapproved agencies will not be accepted and no introductory fees will apply. We are an equal opportunities employer. We welcome applications from all qualified candidates regardless of gender, race, ethnicity, disability, age, sexual orientation, religion or any other protected characteristic. Reasonable adjustments are available during the recruitment process We know the confidence gap and imposter phenomenon can stop talented candidates applying. You do not need to meet every criterion - your skills and potential matter. Don't hold back we want to hear from you All recruitment materials comply with legal and regulatory requirements including the EU Pay Transparency Directive and the Equality Acts UK and Ireland
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, / Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive (Commensurate with skills and experience) What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control : Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge ! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 25th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible. "Due to the festive season, there may be a delay in the processing of your application. Your application is important to us, and we will respond as soon as possible. Thank you for your understanding."
Jan 06, 2026
Full time
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, / Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive (Commensurate with skills and experience) What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control : Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge ! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 25th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible. "Due to the festive season, there may be a delay in the processing of your application. Your application is important to us, and we will respond as soon as possible. Thank you for your understanding."
Overview At Engine by Starling, we are on a mission to find and work with leading banks all around the world who have the ambition to build rapid growth businesses, on our technology. Engine is Starling's software-as-a-service (SaaS) business, the technology that was built to power Starling Bank, and two years ago we split out as a separate business. Starling Bank has seen exceptional growth and success, and a large part of that is down to the fact that we have built our own modern technology from the ground up. This SaaS technology platform is now available to banks and financial institutions all around the world, enabling them to benefit from the innovative digital features and efficient back-office processes that have helped achieve Starling's success. As a company, everyone is expected to roll up their sleeves to help deliver great outcomes for our clients. We are an engineering led company and we're looking for someone who will be excited by the potential for Engine's technology to transform banking in different markets around the world. Hybrid Working We have a Hybrid approach to working here at Engine - our preference is that you're located within a commutable distance of one of our offices so that we're able to interact and collaborate in person. About the Role The Engine Platform is a highly configurable core banking platform, supporting clients globally. This role is focused on development and delivery of our core Platform technical strategy, such as integrations, connections, configurations, and internal tools to facilitate the platform's growth and allow our clients to integrate with their local providers into the platform. As a Technical Platform Owner at Engine, you will collaborate closely with teams across Technology and work with our engineering and product teams to ensure that our technology platform meets the needs of our clients and partner engineers who integrate with it. You will also ensure that the platform aligns with the company's broader technical strategy, long term goals and make integrating with Engine as seamless as possible. At Engine, we spend our time building products that we're really proud of. We focus on the experience, often delivering things with real polish but sometimes making a fast strategic move. We think being good at product requires clear communication, a sense of focus, and to challenge the conventional ways of doing things. We're open-minded when it comes to hiring, we care more about skills and attitude than specific experience or qualifications. Key Responsibilities Work with platform engineering teams to develop and communicate a cohesive product roadmap that delivers high-impact outcomes that improve developer productivity and experience for our clients engineers. Gather feedback and break down problems: Actively listen to teams for pain points and feedback, gather requirements, and break down complex problems into actionable projects across teams. Drive adoption and education: Promote the platform's capabilities by creating clear documentation (with the help of our technical writers), providing training and guidance to our internal teams. Define and Measure Success: Establish and track key technical and business metrics like API latency, developer satisfaction, integration time, and platform adoption rates to ensure our strategy is impactful. Ensure security and compliance: Collaborate with security and compliance teams to embed best practices and meet all regulatory requirements. Qualifications A deep, hands-on understanding of how modern, distributed systems are built at scale. You should be able to articulate the trade-offs of different architectural decisions and speak fluently about REST APIs, webhooks, event-driven architecture, and asynchronous communication patterns. Hands-on engineering experience or a technical background. Proven experience as a product or platform owner in a highly technical domain. Ideally, you've been a part of a team that has scaled a platform from a foundational stage to a widely adopted product. The ability to simplify and provide clarity on complex, architectural problems to a wide range of stakeholders, from junior engineers to executive leadership. Experience in making evidence-based product decisions using both qualitative and quantitative data, specifically within a technical product context. A proven ability to act as a voice for the user and influence teams and stakeholders without direct authority, particularly in engineering-led environments. You should be comfortable working directly with engineers, both internally and externally. You can "speak their language" and have a strong understanding of how they would integrate into a technical platform. Experience building B2B SaaS products from the ground up. Nice to have Experience integrating with a core banking platform. Experience in the FinTech or banking industry. Experience in taking a software from an internal tool to an external, revenue-generating product. Interview process Interviewing is a two way process and we want you to have the time and opportunity to get to know us, as much as we are getting to know you! Our interviews are conversational and we want to get the best from you, so come with questions and be curious. In general you can expect the below, following a chat with one of our Talent Team: Stage 1 - 45 mins with someone from the tech team Stage 2 - 60 min with two team members Stage 3 - Final with either CTO/ Deputy CTO or Engineering Director Benefits 33 days holiday (including public holidays, which you can take when it works best for you) An extra day's holiday for your birthday Annual leave is increased with length of service, and you can choose to buy or sell up to five extra days off 16 hours paid volunteering time a year Salary sacrifice, company enhanced pension scheme Life insurance at 4x your salary & group income protection Private Medical Insurance with VitalityHealth including mental health support and cancer care. Partner benefits include discounts with Waitrose, Mr&Mrs Smith and Peloton Generous family-friendly policies Incentives refer a friend scheme Perkbox membership giving access to retail discounts, a wellness platform for physical and mental health, and weekly free and boosted perks Access to initiatives like Cycle to Work, Salary Sacrificed Gym partnerships and Electric Vehicle (EV) leasing About Us You may be put off applying for a role because you don't tick every box. Forget that! While we can't accommodate every flexible working request, we're always open to discussion. So, if you're excited about working with us, but aren't sure if you're 100% there yet, get in touch anyway. We're on a mission to radically reshape banking - and that starts with our brilliant team. Whatever came before, we're proud to bring together people of all backgrounds and experiences who love working together to solve problems. Engine by Starling is an equal opportunity employer, and we're proud of our ongoing efforts to foster diversity & inclusion in the workplace. Individuals seeking employment at Engine by Starling are considered without regard to race, religion, national origin, age, sex, gender, gender identity, gender expression, sexual orientation, marital status, medical condition, ancestry, physical or mental disability, military or veteran status, or any other characteristic protected by applicable law. When you provide us with this information, you are doing so at your own consent, with full knowledge that we will process this personal data in accordance with our Privacy Notice. By submitting your application, you agree that Engine by Starling and Starling Bank will collect your personal data for recruiting and related purposes. Our Privacy Notice explains what personal information we will process, where we will process your personal information, its purposes for processing your personal information, and the rights you can exercise over our use of your personal information.
Jan 06, 2026
Full time
Overview At Engine by Starling, we are on a mission to find and work with leading banks all around the world who have the ambition to build rapid growth businesses, on our technology. Engine is Starling's software-as-a-service (SaaS) business, the technology that was built to power Starling Bank, and two years ago we split out as a separate business. Starling Bank has seen exceptional growth and success, and a large part of that is down to the fact that we have built our own modern technology from the ground up. This SaaS technology platform is now available to banks and financial institutions all around the world, enabling them to benefit from the innovative digital features and efficient back-office processes that have helped achieve Starling's success. As a company, everyone is expected to roll up their sleeves to help deliver great outcomes for our clients. We are an engineering led company and we're looking for someone who will be excited by the potential for Engine's technology to transform banking in different markets around the world. Hybrid Working We have a Hybrid approach to working here at Engine - our preference is that you're located within a commutable distance of one of our offices so that we're able to interact and collaborate in person. About the Role The Engine Platform is a highly configurable core banking platform, supporting clients globally. This role is focused on development and delivery of our core Platform technical strategy, such as integrations, connections, configurations, and internal tools to facilitate the platform's growth and allow our clients to integrate with their local providers into the platform. As a Technical Platform Owner at Engine, you will collaborate closely with teams across Technology and work with our engineering and product teams to ensure that our technology platform meets the needs of our clients and partner engineers who integrate with it. You will also ensure that the platform aligns with the company's broader technical strategy, long term goals and make integrating with Engine as seamless as possible. At Engine, we spend our time building products that we're really proud of. We focus on the experience, often delivering things with real polish but sometimes making a fast strategic move. We think being good at product requires clear communication, a sense of focus, and to challenge the conventional ways of doing things. We're open-minded when it comes to hiring, we care more about skills and attitude than specific experience or qualifications. Key Responsibilities Work with platform engineering teams to develop and communicate a cohesive product roadmap that delivers high-impact outcomes that improve developer productivity and experience for our clients engineers. Gather feedback and break down problems: Actively listen to teams for pain points and feedback, gather requirements, and break down complex problems into actionable projects across teams. Drive adoption and education: Promote the platform's capabilities by creating clear documentation (with the help of our technical writers), providing training and guidance to our internal teams. Define and Measure Success: Establish and track key technical and business metrics like API latency, developer satisfaction, integration time, and platform adoption rates to ensure our strategy is impactful. Ensure security and compliance: Collaborate with security and compliance teams to embed best practices and meet all regulatory requirements. Qualifications A deep, hands-on understanding of how modern, distributed systems are built at scale. You should be able to articulate the trade-offs of different architectural decisions and speak fluently about REST APIs, webhooks, event-driven architecture, and asynchronous communication patterns. Hands-on engineering experience or a technical background. Proven experience as a product or platform owner in a highly technical domain. Ideally, you've been a part of a team that has scaled a platform from a foundational stage to a widely adopted product. The ability to simplify and provide clarity on complex, architectural problems to a wide range of stakeholders, from junior engineers to executive leadership. Experience in making evidence-based product decisions using both qualitative and quantitative data, specifically within a technical product context. A proven ability to act as a voice for the user and influence teams and stakeholders without direct authority, particularly in engineering-led environments. You should be comfortable working directly with engineers, both internally and externally. You can "speak their language" and have a strong understanding of how they would integrate into a technical platform. Experience building B2B SaaS products from the ground up. Nice to have Experience integrating with a core banking platform. Experience in the FinTech or banking industry. Experience in taking a software from an internal tool to an external, revenue-generating product. Interview process Interviewing is a two way process and we want you to have the time and opportunity to get to know us, as much as we are getting to know you! Our interviews are conversational and we want to get the best from you, so come with questions and be curious. In general you can expect the below, following a chat with one of our Talent Team: Stage 1 - 45 mins with someone from the tech team Stage 2 - 60 min with two team members Stage 3 - Final with either CTO/ Deputy CTO or Engineering Director Benefits 33 days holiday (including public holidays, which you can take when it works best for you) An extra day's holiday for your birthday Annual leave is increased with length of service, and you can choose to buy or sell up to five extra days off 16 hours paid volunteering time a year Salary sacrifice, company enhanced pension scheme Life insurance at 4x your salary & group income protection Private Medical Insurance with VitalityHealth including mental health support and cancer care. Partner benefits include discounts with Waitrose, Mr&Mrs Smith and Peloton Generous family-friendly policies Incentives refer a friend scheme Perkbox membership giving access to retail discounts, a wellness platform for physical and mental health, and weekly free and boosted perks Access to initiatives like Cycle to Work, Salary Sacrificed Gym partnerships and Electric Vehicle (EV) leasing About Us You may be put off applying for a role because you don't tick every box. Forget that! While we can't accommodate every flexible working request, we're always open to discussion. So, if you're excited about working with us, but aren't sure if you're 100% there yet, get in touch anyway. We're on a mission to radically reshape banking - and that starts with our brilliant team. Whatever came before, we're proud to bring together people of all backgrounds and experiences who love working together to solve problems. Engine by Starling is an equal opportunity employer, and we're proud of our ongoing efforts to foster diversity & inclusion in the workplace. Individuals seeking employment at Engine by Starling are considered without regard to race, religion, national origin, age, sex, gender, gender identity, gender expression, sexual orientation, marital status, medical condition, ancestry, physical or mental disability, military or veteran status, or any other characteristic protected by applicable law. When you provide us with this information, you are doing so at your own consent, with full knowledge that we will process this personal data in accordance with our Privacy Notice. By submitting your application, you agree that Engine by Starling and Starling Bank will collect your personal data for recruiting and related purposes. Our Privacy Notice explains what personal information we will process, where we will process your personal information, its purposes for processing your personal information, and the rights you can exercise over our use of your personal information.
About the company Ctrl Alt is a leading tokenization infrastructure platform, combining groundbreaking technology with expert financial engineering to deliver tailored, compliant solutions in the alternative assets space. Specializing in structuring, issuance and distribution, Ctrl Alt supports clients through every stage of the tokenization lifecycle. Since launching in 2022, Ctrl Alt has tokenised over $460m in assets, spanning real estate, private credit, funds, litigation finance and more. With offices in the UK, Ireland and the UAE, the Ctrl Alt team comprises top tier financial, product and technology experts including alumni from Morgan Stanley, Credit Suisse, UBS and Revolut. Ctrl Alt is backed by leading VCs and financial institutions including Molten, MiddleGame Ventures and SEI. What's Involved As Head of Product you will define and execute the product strategy that powers the institutional adoption of tokenisation. Reporting to the Chief Product Officer (CPO) you will lead a team of Product Managers and collaborate closely with engineering, design and operations teams to build products enabling financial institutions, asset managers and enterprises to issue, trade and manage tokenised assets at scale. The Role Define and own the global product strategy and roadmap, ensuring alignment with the company's long term vision and commercial goals across multiple product lines and market verticals. Lead and mentor a high performing team of Product Managers. Oversee the entire product lifecycle from discovery and market validation through to delivery, adoption and continuous optimisation. Develop frameworks and processes to streamline decision making, improve execution velocity and scale product delivery. Champion innovation in tokenisation, identifying emerging opportunities and challenging conventional thinking in the space. Requirements Must Haves 6+ years of product management experience, including 3+ years in a product leadership role managing multiple PMs. Proven experience building and scaling B2B financial or fintech products in a startup or scale up environment (e.g. fintech, capital markets, web3 or blockchain infrastructure). Strong record of delivering 0-1 products. Exceptional ability to translate complex market and technical insights into clear product strategies and execution plans. Skilled in leading cross functional teams and managing stakeholder alignment across technical, commercial and regulatory domains. Deep appreciation for and curiosity about the future of tokenisation and its role in reshaping financial infrastructure. Nice to Haves Experience working in high growth startups. Knowledge of tokenisation and digital assets. If you would like to stand out in the application process please showcase anything you deem useful in lieu of the traditional cover letter. Stock Options - equity plans that let you share in the company's growth. IT Equipment - a MacBook, monitor and any accessories you need to do your job well. Private Health Insurance. Learning & Development - an annual budget to spend on books, courses, certifications and study leave for qualifying exams. Referral Bonus - £1,000 (or equivalent in local currency) for referring someone who joins and completes their probation. Impact - work in a fast growing startup where your contributions matter. How to Apply Simply hit apply below, where you will be redirected to a form to fill out all relevant details. You will be asked to upload a CV and cover letter. Interview Process Stage 1 - Initial interview. Stage 2 - Technical interview. Stage 3 - Cultural interview with the CEO.
Jan 06, 2026
Full time
About the company Ctrl Alt is a leading tokenization infrastructure platform, combining groundbreaking technology with expert financial engineering to deliver tailored, compliant solutions in the alternative assets space. Specializing in structuring, issuance and distribution, Ctrl Alt supports clients through every stage of the tokenization lifecycle. Since launching in 2022, Ctrl Alt has tokenised over $460m in assets, spanning real estate, private credit, funds, litigation finance and more. With offices in the UK, Ireland and the UAE, the Ctrl Alt team comprises top tier financial, product and technology experts including alumni from Morgan Stanley, Credit Suisse, UBS and Revolut. Ctrl Alt is backed by leading VCs and financial institutions including Molten, MiddleGame Ventures and SEI. What's Involved As Head of Product you will define and execute the product strategy that powers the institutional adoption of tokenisation. Reporting to the Chief Product Officer (CPO) you will lead a team of Product Managers and collaborate closely with engineering, design and operations teams to build products enabling financial institutions, asset managers and enterprises to issue, trade and manage tokenised assets at scale. The Role Define and own the global product strategy and roadmap, ensuring alignment with the company's long term vision and commercial goals across multiple product lines and market verticals. Lead and mentor a high performing team of Product Managers. Oversee the entire product lifecycle from discovery and market validation through to delivery, adoption and continuous optimisation. Develop frameworks and processes to streamline decision making, improve execution velocity and scale product delivery. Champion innovation in tokenisation, identifying emerging opportunities and challenging conventional thinking in the space. Requirements Must Haves 6+ years of product management experience, including 3+ years in a product leadership role managing multiple PMs. Proven experience building and scaling B2B financial or fintech products in a startup or scale up environment (e.g. fintech, capital markets, web3 or blockchain infrastructure). Strong record of delivering 0-1 products. Exceptional ability to translate complex market and technical insights into clear product strategies and execution plans. Skilled in leading cross functional teams and managing stakeholder alignment across technical, commercial and regulatory domains. Deep appreciation for and curiosity about the future of tokenisation and its role in reshaping financial infrastructure. Nice to Haves Experience working in high growth startups. Knowledge of tokenisation and digital assets. If you would like to stand out in the application process please showcase anything you deem useful in lieu of the traditional cover letter. Stock Options - equity plans that let you share in the company's growth. IT Equipment - a MacBook, monitor and any accessories you need to do your job well. Private Health Insurance. Learning & Development - an annual budget to spend on books, courses, certifications and study leave for qualifying exams. Referral Bonus - £1,000 (or equivalent in local currency) for referring someone who joins and completes their probation. Impact - work in a fast growing startup where your contributions matter. How to Apply Simply hit apply below, where you will be redirected to a form to fill out all relevant details. You will be asked to upload a CV and cover letter. Interview Process Stage 1 - Initial interview. Stage 2 - Technical interview. Stage 3 - Cultural interview with the CEO.
Job Title: Senior Engineer - Electrical Engineering (C & I) Location: Barrow-in-Furness - Hybrid (2 days onsite per fortnight dependent on business needs) Salary: Competitive (Commensurate with skills and experience) What you'll be doing: Develop a functional design for C&I solution for electrical systems, including deriving the functional design from Piping & Instrumentation diagrams Producing Bill of Materials for C&I equipment Specifying instrumentation measuring pressure/temperature/flow/level/analysis that is fit for purpose for specific process conditions Producing a C&I design that satisfies a wide range of requirements such as; functional; safety; defence standards, British standards, naval standards, nuclear standards Judging and measuring compliance against non-functional stakeholders (EMC, Shock, Metallics etc .) Produce verification evidence to demonstrate design compliance with requirements Production of various design documents such as; I/O schedules, instrument schedules, cable schedules, functional design specification, instrument specification Implementation of physical system-to-system interface design Undertaking/leading technical design reviews for C&I Articulating and presenting technical arguments, clearly and logically Undertaking peer reviews Managing system design maturity to meet programme demands Liaising with internal and external customers as part of a technical team Your skills and experiences: BEng (Hons) / MEng or equivalent Working towards professional registration Technical report writing skills Demonstrable experience of engineering lifecycle Knowledge and experience in defence standards whilst not essential would be an advantage System calculations, modelling and analysis Understanding of at least one of the following areas: Legacy understanding of submarine design programmes Experience in high, medium and low voltage systems Understanding of control system architecture and communication protocols (i.e RS-485, PROFIBUS) Completion and verification of designs in accordance with IEC 61508 - Functional Safety (or similar) and production of supporting evidence to substantiate safety claims Possess a multi-disciplinary understanding of engineering through experience including; Mechanical / Process / Instrument / Electrical / Control / Safety Specifying equipment for use in Hazardous Areas and producing verification evidence such as; Hazardous Area Schedule, Intrinsically Safe Loop Calculations Providing input to production and improvement of process instructions Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Marine Systems Control and Instrumentation Team: An excellent opportunity has arisen for a Senior Engineer -Electrical Engineering (Control and Instrumentation) working within the Marine Systems Control and Instrumentation Team, developing C&I Design for Submarine Platform Marine Systems This role will be working on the SSNA program and the next generation submarine design. The Senior Engineer shall provide support to the Principal Engineers and/or external specialists during development, analysis , integration and verification of platform control and instrumentation systems. In this role you will be involved in leading analysis and the production of technical reports and team deliverables, such as managing and maturing operator control console design to meet defined design criteria and programme demands. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 11th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible. "Due to the festive season, there may be a delay in the processing of your application. Your application is important to us, and we will respond as soon as possible. Thank you for your understanding."
Jan 06, 2026
Full time
Job Title: Senior Engineer - Electrical Engineering (C & I) Location: Barrow-in-Furness - Hybrid (2 days onsite per fortnight dependent on business needs) Salary: Competitive (Commensurate with skills and experience) What you'll be doing: Develop a functional design for C&I solution for electrical systems, including deriving the functional design from Piping & Instrumentation diagrams Producing Bill of Materials for C&I equipment Specifying instrumentation measuring pressure/temperature/flow/level/analysis that is fit for purpose for specific process conditions Producing a C&I design that satisfies a wide range of requirements such as; functional; safety; defence standards, British standards, naval standards, nuclear standards Judging and measuring compliance against non-functional stakeholders (EMC, Shock, Metallics etc .) Produce verification evidence to demonstrate design compliance with requirements Production of various design documents such as; I/O schedules, instrument schedules, cable schedules, functional design specification, instrument specification Implementation of physical system-to-system interface design Undertaking/leading technical design reviews for C&I Articulating and presenting technical arguments, clearly and logically Undertaking peer reviews Managing system design maturity to meet programme demands Liaising with internal and external customers as part of a technical team Your skills and experiences: BEng (Hons) / MEng or equivalent Working towards professional registration Technical report writing skills Demonstrable experience of engineering lifecycle Knowledge and experience in defence standards whilst not essential would be an advantage System calculations, modelling and analysis Understanding of at least one of the following areas: Legacy understanding of submarine design programmes Experience in high, medium and low voltage systems Understanding of control system architecture and communication protocols (i.e RS-485, PROFIBUS) Completion and verification of designs in accordance with IEC 61508 - Functional Safety (or similar) and production of supporting evidence to substantiate safety claims Possess a multi-disciplinary understanding of engineering through experience including; Mechanical / Process / Instrument / Electrical / Control / Safety Specifying equipment for use in Hazardous Areas and producing verification evidence such as; Hazardous Area Schedule, Intrinsically Safe Loop Calculations Providing input to production and improvement of process instructions Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Marine Systems Control and Instrumentation Team: An excellent opportunity has arisen for a Senior Engineer -Electrical Engineering (Control and Instrumentation) working within the Marine Systems Control and Instrumentation Team, developing C&I Design for Submarine Platform Marine Systems This role will be working on the SSNA program and the next generation submarine design. The Senior Engineer shall provide support to the Principal Engineers and/or external specialists during development, analysis , integration and verification of platform control and instrumentation systems. In this role you will be involved in leading analysis and the production of technical reports and team deliverables, such as managing and maturing operator control console design to meet defined design criteria and programme demands. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 11th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible. "Due to the festive season, there may be a delay in the processing of your application. Your application is important to us, and we will respond as soon as possible. Thank you for your understanding."
At Moody's, we unite the brightest minds to turn today's risks into tomorrow's opportunities. We do this by striving to create an inclusive environment where everyone feels welcome to be who they are-with the freedom to exchange ideas, think innovatively, and listen to each other and customers in meaningful ways. Moody's is transforming how the world sees risk. As a global leader in ratings and integrated risk assessment, we're advancing AI to move from insight to action-enabling intelligence that not only understands complexity but responds to it. We decode risk to unlock opportunity, helping our clients navigate uncertainty with clarity, speed, and confidence. If you are excited about this opportunity but do not meet every single requirement, please apply! You still may be a great fit for this role or other open roles. We are seeking candidates who model our values: invest in every relationship, lead with curiosity, champion diverse perspectives, turn inputs into actions, and uphold trust through integrity. As a Quantitative Financial Analyst - Development Validation, you will ensure the accuracy and quality of financial analytics produced by our asset liability management product. You will serve as the critical bridge between financial theory and implementation, validating that our systems produce correct results aligned with research and industry standards. You will work in a dynamic international environment, collaborating with teams and clients across different countries and time zones. Primary Responsibilities Review financial analytics requirements and collaborate with Engineering, Product Management and Research to design comprehensive testing strategies Develop independent financial model prototypes and benchmarks using Python, R or MATLAB to validate production implementations Create detailed test cases covering edge cases, stress scenarios, and regulatory requirements Analyze discrepancies between expected and actual results, investigating root causes and working with developers to resolve issues Offer constructive, results-based input to product and engineering teams to support the optimization of financial models Execute and maintain regression test suites to ensure continued accuracy across releases Skills and competencies 3 to 5 years of experience in a similar role (model validation, quantitative analysis, or financial model development) Master's degree in Financial Engineering, Quantitative Finance, Accounting, Mathematics, Statistics, or closely-related field Good understanding of Financial Risk Models, Fixed Income analysis or Balance Sheet Management Strong analytical skills with a rigorous, quantitative approach to problem-solving Ability to read and implement financial models from technical specifications Proficiency in Excel, knowledge of Python or R or MATLAB Fluency in English, with strong written and verbal communication skills, is a mandatory requirement. Additional desirable skills Experience with testing frameworks and automation is a plus Programming skills in C++, C# or Java sufficient to understand production code would be a plus Detail-oriented with persistence in identifying and resolving subtle numerical issues Excellent written and verbal communication skills to document findings and explain complex concepts Basic understanding of AI/ML concepts and curiosity about how AI can enhance validation processes Ability to work independently on multiple validation projects while collaborating effectively with cross-functional teams Demonstrated creativity, flexibility, and commitment to continuous learning Moody's is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender expression, gender identity or any other characteristic protected by law. Candidates for Moody's Corporation may be asked to disclose securities holdings pursuant to Moody's Policy for Securities Trading and the requirements of the position. Employment is contingent upon compliance with the Policy, including remediation of positions in those holdings as necessary.
Jan 06, 2026
Full time
At Moody's, we unite the brightest minds to turn today's risks into tomorrow's opportunities. We do this by striving to create an inclusive environment where everyone feels welcome to be who they are-with the freedom to exchange ideas, think innovatively, and listen to each other and customers in meaningful ways. Moody's is transforming how the world sees risk. As a global leader in ratings and integrated risk assessment, we're advancing AI to move from insight to action-enabling intelligence that not only understands complexity but responds to it. We decode risk to unlock opportunity, helping our clients navigate uncertainty with clarity, speed, and confidence. If you are excited about this opportunity but do not meet every single requirement, please apply! You still may be a great fit for this role or other open roles. We are seeking candidates who model our values: invest in every relationship, lead with curiosity, champion diverse perspectives, turn inputs into actions, and uphold trust through integrity. As a Quantitative Financial Analyst - Development Validation, you will ensure the accuracy and quality of financial analytics produced by our asset liability management product. You will serve as the critical bridge between financial theory and implementation, validating that our systems produce correct results aligned with research and industry standards. You will work in a dynamic international environment, collaborating with teams and clients across different countries and time zones. Primary Responsibilities Review financial analytics requirements and collaborate with Engineering, Product Management and Research to design comprehensive testing strategies Develop independent financial model prototypes and benchmarks using Python, R or MATLAB to validate production implementations Create detailed test cases covering edge cases, stress scenarios, and regulatory requirements Analyze discrepancies between expected and actual results, investigating root causes and working with developers to resolve issues Offer constructive, results-based input to product and engineering teams to support the optimization of financial models Execute and maintain regression test suites to ensure continued accuracy across releases Skills and competencies 3 to 5 years of experience in a similar role (model validation, quantitative analysis, or financial model development) Master's degree in Financial Engineering, Quantitative Finance, Accounting, Mathematics, Statistics, or closely-related field Good understanding of Financial Risk Models, Fixed Income analysis or Balance Sheet Management Strong analytical skills with a rigorous, quantitative approach to problem-solving Ability to read and implement financial models from technical specifications Proficiency in Excel, knowledge of Python or R or MATLAB Fluency in English, with strong written and verbal communication skills, is a mandatory requirement. Additional desirable skills Experience with testing frameworks and automation is a plus Programming skills in C++, C# or Java sufficient to understand production code would be a plus Detail-oriented with persistence in identifying and resolving subtle numerical issues Excellent written and verbal communication skills to document findings and explain complex concepts Basic understanding of AI/ML concepts and curiosity about how AI can enhance validation processes Ability to work independently on multiple validation projects while collaborating effectively with cross-functional teams Demonstrated creativity, flexibility, and commitment to continuous learning Moody's is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender expression, gender identity or any other characteristic protected by law. Candidates for Moody's Corporation may be asked to disclose securities holdings pursuant to Moody's Policy for Securities Trading and the requirements of the position. Employment is contingent upon compliance with the Policy, including remediation of positions in those holdings as necessary.
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, / Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive (Commensurate with skills and experience) What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control : Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge ! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 25th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible. "Due to the festive season, there may be a delay in the processing of your application. Your application is important to us, and we will respond as soon as possible. Thank you for your understanding."
Jan 06, 2026
Full time
Job Title: Consultant Engineer - Electrical Engineering Location: Barrow-in-Furness, / Filton - we offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Competitive (Commensurate with skills and experience) What you'll be doing: Acting as the electrical SME providing technical leadership and guidance to a range of cross discipline internal and external stakeholders including equipment suppliers Managing the electrical interface with the electrical power system ensuring that a best for programme approach is adopted Technical ownership of the end to end delivery of key technology readiness projects essential in demonstrating an appropriate level of maturity is achieved in the end product prior to platform integration Supporting technical delivery of facility requirements needed to deliver technology readiness projects including the facilities to support the end product verification and validation activities Undertaking technical risk analysis and developing risk mitigation plans in support of equipment delivery into the SSNA platform Supporting the development and resilience planning for the SSNA Steam IDTs engineering team ensuring succession planning is in place in support of an enduring SQEP capability Independent governance, authoring and approval of technical artefacts Your skills and experiences: Essential Relevant 1st degree in Electrical Engineering BSc (Hons) / BEng (Hons) / MEng (Hons) Chartered Engineer (CEng) or working toward Chartership Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions) Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination) Experience in developing and delivering power system / equipment level verification and validation plans (including technology readiness level strategies) Knowledge of the complete engineering life cycle of delivery an equipment or system in a complex engineering environment with many competing requirements (requirement generation through to test and commissioning) Desirable Relevant 2nd specialised degree or further education in Electrical Engineering (power systems / power electronics / electrical machine design) e.g. MSc(Eng) / MPhil(Eng) / PhD / EngD Knowledge of permanent magnet rotating machines Knowledge of Power System Analysis of AC and DC systems and modelling of Generation and control : Generators, AVRs, Govenors/Speed controllers Knowledge of the interface requirements of power system control and instrumentation for key equipment's and components within a power system design Submarine operator experience Benefits As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The SSNA Steam Integrated Delivery Team (SIDT): You will work as the Electrical Subject Matter Expert (SME) within SSNA's Steam Integrated Delivery Team (SIDT). The SIDT is tasked with delivering key equipment into the SSNA platform, which is novel to a submarine environment. Due to the novelty of the equipment there is a need to support equipment delivery with additional parallel technology maturity enablement plans. This is a unique and exciting role that offers the opportunity to shape how the SIDT delivers the challenge ! The role offers significant development in all areas from requirement generation through to development of verification and validation plans along with the facilities required to enable timely equipment delivery and parallel technology realisation. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 25th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible. "Due to the festive season, there may be a delay in the processing of your application. Your application is important to us, and we will respond as soon as possible. Thank you for your understanding."
