70 jobs found

Senior Stress Engineer Aerospace/Defence Role Overview As a result of growing programme demands, an established Mechanical Analysis function is seeking a highly capable S enior Stress Engineer to take a leading role in the structural design and development of a future-generation, highly complex defence system. The successful candidate will work closely with a range of engineering disciplines across multiple UK locations to deliver a robust, high-performance aerospace structural solution. Salary: Approximately 58,000 per annum (dependent on experience) Location: Stevenage (relocation support may be available) Working Pattern: Hybrid working, with a minimum of 3 days per week on site due to the classified nature of the work Security Requirements: Applicants must be British citizens or dual nationals holding British citizenship. Employment is subject to nationality and right-to-work constraints. All offers are conditional upon successfully achieving BPSS screening and Security Clearance (SC) following acceptance. Benefits Package Annual performance bonus: Up to 2,500 (linked to company results) Pension scheme: Combined employer and employee contributions of up to 14% Paid overtime: Available depending on business need Flexible leave: Up to 15 additional flexi-leave days Flexible working: Consideration given to alternative working arrangements Enhanced family leave: Up to 26 weeks enhanced maternity, adoption and shared parental leave Improved paternity, neonatal leave and fertility treatment support On-site facilities: Subsidised catering, free parking and a range of additional amenities The Role The Mechanical Analysis team provides critical expertise in structural and thermal performance for advanced military platforms. Support is delivered across the full product lifecycle, including early concept evaluation, detailed design development, production support and in-service activities. This role offers exposure to a broad spectrum of analysis activities, such as: Classical analytical methods and hand calculations CAE-based simulations (static, dynamic, fatigue, aeroelastic, nonlinear, impact and kinematic analysis) Structural qualification and design verification testing Load generation and fault investigation The team operates within a collaborative, inclusive environment that values technical excellence, continuous improvement and professional development. Engineers are encouraged to share knowledge and contribute across multiple programmes concurrently. Candidate Profile You will ideally hold a degree in a relevant engineering or scientific discipline, or possess substantial equivalent industry experience (e.g. Mechanical Engineering, Aerospace Engineering, Structural Analysis). Key experience and attributes include: A proven track record of planning, leading and delivering complex structural analysis work packages Strong capability using both traditional analytical techniques and CAE tools (experience with HyperWorks is advantageous) Ability to produce clear, high-quality technical documentation and present findings confidently to a range of stakeholders, including senior leadership A proactive mindset with enthusiasm for improving tools, processes and methodologies Experience mentoring junior engineers and supporting their technical and professional development Comfortable working autonomously while also contributing effectively within multidisciplinary teams Excellent written and verbal communication skills, with the confidence to influence and engage stakeholders Experience in composite structures analysis would be beneficial Willingness to apply for and maintain DV clearance is desirable

Energy Modeller Liverpool Salary: DOE Penguin Recruitment are excited to be working with a long-established energy and sustainability consultancy, widely recognised for supporting non-domestic and mixed-use developments across the UK. Due to continued growth, they are looking for a talented Energy Assessor to join their expanding technical team. Benefits: Competitive salary package Flexibility with hybrid/remote working options Ongoing professional training and skill development Defined career progression pathway Supportive, collaborative technical team Comprehensive company benefits What We're Looking For: Proven experience with SAP Strong understanding of Part L2, BRUKL outputs, and non-domestic energy compliance Ability to carry out accurate calculations and produce clear, high-quality technical documentation Confident communicator who can work effectively with architects, engineers, and clients Interest in broadening skillsets in areas such as TM59, Part O, and Dynamic Thermal Modelling (DTM) Key Responsibilities: Produce detailed BRUKL reports and issue non-domestic EPCs Advise design teams on compliance strategy and overall energy performance Support overheating assessments or DTM work when needed Maintain accurate project records and contribute to internal technical processes If you're looking to take the next step in your energy and sustainability career, we'd love to hear from you. Please contact Caitlin Richards for more information or to explore similar roles within the sector. This is a permanent position.

Energy Modeller Cardiff Penguin Recruitment are excited to be working with a long-established energy and sustainability consultancy, widely recognised for supporting non-domestic and mixed-use developments across the UK. Due to continued growth, they are looking for a talented Energy Assessor to join their expanding technical team. Benefits: Competitive salary package Flexibility with hybrid/remote working options Ongoing professional training and skill development Defined career progression pathway Supportive, collaborative technical team Comprehensive company benefits What We're Looking For: Proven experience with SAP Strong understanding of Part L2, BRUKL outputs, and non-domestic energy compliance Ability to carry out accurate calculations and produce clear, high-quality technical documentation Confident communicator who can work effectively with architects, engineers, and clients Interest in broadening skillsets in areas such as TM59, Part O, and Dynamic Thermal Modelling (DTM) Key Responsibilities: Produce detailed BRUKL reports and issue non-domestic EPCs Advise design teams on compliance strategy and overall energy performance Support overheating assessments or DTM work when needed Maintain accurate project records and contribute to internal technical processes If you're looking to take the next step in your energy and sustainability career, we'd love to hear from you. Please contact Caitlin Richards for more information or to explore similar roles within the sector. This is a permanent position.

About the Role A leading engineering consultancy are looking for a Senior or Principal Energy and Carbon Consultant to join their growing sustainability team. You'll help develop energy strategies for new developments and estate renewals, while supporting the delivery of holistic sustainability frameworks that balance social, environmental and economic goals. This role would suit someone with experience in energy consulting or mechanical/electrical engineering, ideally Chartered or working towards it. You'll have a strong technical background and a real passion for sustainable design - from low-carbon heating and renewables to energy resilience and smart city infrastructure. Qualifications & Experience Degree (MEng/MSc preferred) in mechanical, electrical or similar engineering discipline Chartered Engineer (CEng) or working towards chartership (CIBSE, EI, IMechE, IET, etc.) Expertise in MEP design, energy systems, and low/zero carbon technologies Proficiency in energy modelling tools such as IES, PHPP or SAP Experience preparing Sustainability or Energy Statements for planning Strong understanding of heat networks, PV, heat pumps, and thermal storage Interest in wider sustainability themes such as embodied carbon, circular economy and biodiversity Personal Attributes Strong communicator with clear, client-facing confidence Analytical, organised and proactive Enjoys working in a collaborative, multi-disciplinary environment Curious, creative and motivated by meaningful work Alongside a generous salary and extensive benefits, this opportunity offers a supportive environment for professional growth, including structured mentoring, collaboration across disciplines, and genuine opportunities for career progression. If you're interested to find out more, reach out to Ethan Williams on (phone number removed) or click apply

Job Title: Senior Mechanical Engineer Location: Rochester Salary: Up to £55,000 depending on skills and experience What you'll be doing: Generate design concepts and solutions from first principals to meet project and customer requirements, this will be supported by sketches, hand calculations and associated data packs Prepare and present engineering data packs for internal review and in a customer forum, check and approve datasets (drawings/MBD) are correct to required standards, that they reflect design intent correctly, and that they adequately define parts for manufacture and inspection Identify, define and manage work packages to derisk areas of the product design early on in the lifecycle Be competent in the validation and verification of requirements using appropriate tools (e.g. DOORS) and managing these through the engineering life cycle Work collaboratively across all engineering disciplines, liaising with technical specialists as required Manage the work of mechanical engineers and technicians and take technical responsibility for the design solutions and technical data packs produced, peer checks the work of other mechanical engineers which will include designs, design data, hand calculations and technical reports Your skills and experiences: Essential: Proven track record of product development from concept through to production, with a strong technical ability for applying their underpinning knowledge and experience to solving problems including new technologies and innovations for complex engineering systems Degree in Mechanical Engineering or related subject is preferred or demonstrable equivalent experience. With the ability to apply physics and engineering principals to derive/validate designs Competence in the use of CAD tools (CREO preferred) to prepare design models and technical datasets (drawings/MBD) Desirable: Experience related to areas including avionic systems, optical displays, mechatronics, electronics packaging, anthropometrics, design with composites, additive layer manufacture and test and measurement equipment, will be of value in this role A capability to use specialist dynamic, structural and thermal analysis tools is an advantage including validation of the output of these tools Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Senior Mechanical Engineering team: This role will provide Mechanical Engineering support for the design and development of new innovative designs through to fault finding, diagnostics and salvage of existing products. A Senior Mechanical Engineer will have the ability to innovate exclusively and work with other Engineers/Technicians to develop ideas into a detailed scheme supported by calculations and reports to demonstrate compliance with requirements, which will include risk reduction testing as required. The expectation of a Senior Mechanical Engineer is to provide a high-quality service to customers, on time and within budget with minimum management oversight. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 9th January 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the rol e. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal HVAC Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of cutting-edge HVAC systems, ensuring they meet demanding performance, safety, and environmental standards Create and review high-impact engineering artefacts - from specifications and P&IDs to calculations and 3D models Drive advanced thermal, airflow, and pressure analyses toto validate system performance in challenging conditions Transform complex requirements into robust, innovative, and verifiable design solutions that set the benchmark for excellence Guide and influence engineers, suppliers, and design partners, shaping best-in-class HVAC integration across the platform Enhance design standards and evaluate specialist equipment, contributing to reviews, hazard assessments, and lifecycle verification Your skills and experiences: Strong technical expertise in HVAC and mechanical system design, including psychometrics, thermal analysis , equipment specification, schematics and system balancing Proven experience working in complex or regulated industries, with knowledge of standards such as ISO 15138, BS EN 378, ASHRAE, or CIBSE Skilled in system performance assessment, design validation, modelling, and failure analysis Awareness of multi-disciplinary system integration challenges across structures, electrical, controls , safety, and installation Excellent technical communication and reporting abilities, engaging both internal and external stakeholders STEM degree (or equivalent experience), ideally working toward or holding professional registration (CEng preferred) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Mechanical Integrated Delivery Team: As a Principal HVAC Design Engineer, you'll be at the forefront of one of the UK's most advanced engineering programmes - leading the delivery of complex HVAC systems that shape the future of submarine platforms. You'll take ownership of high-impact systems, provide trusted technical authority, and work across multiple disciplines to drive innovative solutions into reality. You'll be part of the Platform Mechanical Integrated Delivery Team - a fast-moving, highly collaborative group of specialists pushing the boundaries of submarine engineering. This is a unique opportunity to work alongside experts from diverse backgrounds and partner organisations, contributing to mechanical capabilities that are critical to the success of the entire platform We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

RF Design Engineer RF Design Engineer, defence and national security projects Hampshire, on-site with flexible working options Hands-on RF design from LF to X Band on cutting-edge systems Eligible for DV security clearance About the Client Our client is a UK-based technology organisation delivering advanced engineering solutions to customers within defence and national security. They operate in highly regulated environments and invest heavily in innovation and specialist capability. Due to continued project demand, they are now seeking an experienced RF Design Engineer to join their growing engineering team. The Benefits Flexible working hours Annual bonus based on performance Private medical insurance Competitive holiday allowance plus bank holidays Share save scheme and long-term incentives Training and professional development support The RF Design Engineer Role You will design, simulate and test RF and analogue electronic circuits for high-performance defence systems. The role combines hands-on engineering with technical leadership, contributing to concept through to production. You will support integration, validation, documentation, and mentor junior engineers while working closely with project and systems teams. RF Design Engineer Essential Skills Proven experience in RF and analogue circuit design Microwave Office and Altium experience Design from LF to X Band LNA and receiver design Understanding of EMC, thermal and vibration effects Degree in Electronics Engineering or related discipline To Be Considered Please apply through this advert or email me directly via (url removed). For further information please call (phone number removed) or (phone number removed). By applying for this role, you consent for us to process and submit your application to our client in conjunction with this vacancy only. Key Skills RF Design Engineer, Microwave Office, Altium, Analogue Design, LNA, Receivers, EMC, Defence, Electronic Warfare, NSD

Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal HVAC Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of cutting-edge HVAC systems, ensuring they meet demanding performance, safety, and environmental standards Create and review high-impact engineering artefacts - from specifications and P&IDs to calculations and 3D models Drive advanced thermal, airflow, and pressure analyses toto validate system performance in challenging conditions Transform complex requirements into robust, innovative, and verifiable design solutions that set the benchmark for excellence Guide and influence engineers, suppliers, and design partners, shaping best-in-class HVAC integration across the platform Enhance design standards and evaluate specialist equipment, contributing to reviews, hazard assessments, and lifecycle verification Your skills and experiences: Strong technical expertise in HVAC and mechanical system design, including psychometrics, thermal analysis , equipment specification, schematics and system balancing Proven experience working in complex or regulated industries, with knowledge of standards such as ISO 15138, BS EN 378, ASHRAE, or CIBSE Skilled in system performance assessment, design validation, modelling, and failure analysis Awareness of multi-disciplinary system integration challenges across structures, electrical, controls , safety, and installation Excellent technical communication and reporting abilities, engaging both internal and external stakeholders STEM degree (or equivalent experience), ideally working toward or holding professional registration (CEng preferred) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Mechanical Integrated Delivery Team: As a Principal HVAC Design Engineer, you'll be at the forefront of one of the UK's most advanced engineering programmes - leading the delivery of complex HVAC systems that shape the future of submarine platforms. You'll take ownership of high-impact systems, provide trusted technical authority, and work across multiple disciplines to drive innovative solutions into reality. You'll be part of the Platform Mechanical Integrated Delivery Team - a fast-moving, highly collaborative group of specialists pushing the boundaries of submarine engineering. This is a unique opportunity to work alongside experts from diverse backgrounds and partner organisations, contributing to mechanical capabilities that are critical to the success of the entire platform We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Security: SC Clearance Sole UK national On-site: 4 days/week Location: Basildon Rate: £65 per hour Umbrella - inside IR35 Our major defence client is currently looking for a Senior Mechanical Engineer to join the Precision Guidance Integrated Project Team (IPT), working on equipment for the next generation of Missile Seeker Programmes. The successful candidate will be experienced in the Aerospace and/or Defence Industry and preferably hold SC Security status. The Mechanical Engineer role offers hybrid working, with the option of on-site working at our Basildon office. The frequency of on-site visits shall be agreed with the IPT, to ensure that key Milestones and Deliverables are met on time, to budget and to the desired quality. Key Responsibility Areas • Support senior members of staff in the delivery of technical solutions on critical Business Programmes. • Generation of mechanical solutions to relevant company and international standards. • Design of engineering solutions taking into account all requirements including product quality, safety, reliability, testability, sustainability, etc. • Mechanical engineering detailed design, including numerical calculations, tolerance studies, etc. • Produce Manufacturing Data Packs in line with BS8888 including appropriate application of GD&T. • Generate BoM within approve PLM system (Teamcenter). • Contribute to reviews of Mechanical designs in accordance with business and industry standards. • Deliver design solutions against Technical Requirements, within budget and timescales. Skills, Qualifications & Knowledge Experience in: Technical or science degree qualified, or equivalent, with experience. Mechanical engineering for Electronic Products (including EO). Perform hands on mechanical design and development using 3D CAD software (PTC Creo). Structural design and an ability to carry out first pass analyses and work in conjunction with full-time Structural Analysts. Experienced in working on Electro-Optic Products, with proven knowledge of electrical screening, grounding, opto-mechanical sub-assemblies, etc. Detail and assembly drawing generation, in accordance with BS8888. Numerical calculations, tolerance studies, etc. Proven understanding of the application of materials and process finishes to meet EO Product needs. Experienced in the design of Jigs, Fixtures and Tooling to support the Assembly, Integration and Testing of EO Products, for the Aerospace and/or Defence sector. Ability to work within a multi-discipline IPT. Knowledge of Cable Harness design, including Connector selection, screening, strain relief methods, etc. Experienced in various aspects of DfX, including Manufacturing, Assembly, Test, Integration and Sustainability. Operating in a high performing multi-disciplinary Team. Desirable: • Capable of performing first pass Thermal analyses. Intrinsic Job Factors Full Time Hours Tight Deadlines (regular or adhoc) Hybrid working, with time based in Bristol office

Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal HVAC Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of cutting-edge HVAC systems, ensuring they meet demanding performance, safety, and environmental standards Create and review high-impact engineering artefacts - from specifications and P&IDs to calculations and 3D models Drive advanced thermal, airflow, and pressure analyses toto validate system performance in challenging conditions Transform complex requirements into robust, innovative, and verifiable design solutions that set the benchmark for excellence Guide and influence engineers, suppliers, and design partners, shaping best-in-class HVAC integration across the platform Enhance design standards and evaluate specialist equipment, contributing to reviews, hazard assessments, and lifecycle verification Your skills and experiences: Strong technical expertise in HVAC and mechanical system design, including psychometrics, thermal analysis , equipment specification, schematics and system balancing Proven experience working in complex or regulated industries, with knowledge of standards such as ISO 15138, BS EN 378, ASHRAE, or CIBSE Skilled in system performance assessment, design validation, modelling, and failure analysis Awareness of multi-disciplinary system integration challenges across structures, electrical, controls , safety, and installation Excellent technical communication and reporting abilities, engaging both internal and external stakeholders STEM degree (or equivalent experience), ideally working toward or holding professional registration (CEng preferred) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Mechanical Integrated Delivery Team: As a Principal HVAC Design Engineer, you'll be at the forefront of one of the UK's most advanced engineering programmes - leading the delivery of complex HVAC systems that shape the future of submarine platforms. You'll take ownership of high-impact systems, provide trusted technical authority, and work across multiple disciplines to drive innovative solutions into reality. You'll be part of the Platform Mechanical Integrated Delivery Team - a fast-moving, highly collaborative group of specialists pushing the boundaries of submarine engineering. This is a unique opportunity to work alongside experts from diverse backgrounds and partner organisations, contributing to mechanical capabilities that are critical to the success of the entire platform We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal HVAC Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of cutting-edge HVAC systems, ensuring they meet demanding performance, safety, and environmental standards Create and review high-impact engineering artefacts - from specifications and P&IDs to calculations and 3D models Drive advanced thermal, airflow, and pressure analyses toto validate system performance in challenging conditions Transform complex requirements into robust, innovative, and verifiable design solutions that set the benchmark for excellence Guide and influence engineers, suppliers, and design partners, shaping best-in-class HVAC integration across the platform Enhance design standards and evaluate specialist equipment, contributing to reviews, hazard assessments, and lifecycle verification Your skills and experiences: Strong technical expertise in HVAC and mechanical system design, including psychometrics, thermal analysis , equipment specification, schematics and system balancing Proven experience working in complex or regulated industries, with knowledge of standards such as ISO 15138, BS EN 378, ASHRAE, or CIBSE Skilled in system performance assessment, design validation, modelling, and failure analysis Awareness of multi-disciplinary system integration challenges across structures, electrical, controls , safety, and installation Excellent technical communication and reporting abilities, engaging both internal and external stakeholders STEM degree (or equivalent experience), ideally working toward or holding professional registration (CEng preferred) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Mechanical Integrated Delivery Team: As a Principal HVAC Design Engineer, you'll be at the forefront of one of the UK's most advanced engineering programmes - leading the delivery of complex HVAC systems that shape the future of submarine platforms. You'll take ownership of high-impact systems, provide trusted technical authority, and work across multiple disciplines to drive innovative solutions into reality. You'll be part of the Platform Mechanical Integrated Delivery Team - a fast-moving, highly collaborative group of specialists pushing the boundaries of submarine engineering. This is a unique opportunity to work alongside experts from diverse backgrounds and partner organisations, contributing to mechanical capabilities that are critical to the success of the entire platform We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

Job Title: Principal Mechanical Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of complex fluid systems, shaping designs that meet demanding performance and environmental requirements Create and review high-value engineering deliverables - for schematics and P&IDs to calculations, system descriptions, and 3D models Drive advanced system analyses , including flow, pressure, thermal, and transient modelling to validate performance under challenging conditions Select and assess critical equipment (pumps, compressors, valves, heat exchangers, filters, tanks), ensuring it meet tough submarine operating environments Champion technology integrity by reviewing supplier documentation, ensuring full compliance with shock, vibration, atmosphere, temperature, maintainability, and access constraints Influence design quality and safety, contributing to reviews, hazard studies, verification activities, and resolution of technical issues, modifications, and non-conformances Your skills and experiences: Essential: Educated to degree level, with Chartered Engineer status highly desirable Solid background in mechanical, marine, process, or fluid systems engineering gained with a complex or highly regulated environment Strong knowledge of fluid dynamics, thermodynamics, pressure-drop behaviour, transient analysis , and system performance modelling Demonstrated technical expertise in the design, analysis , and integration of both compressible and incompressible fluid systems Desirable: Experience using industry-standard modelling and analysis tools such as FloMASTER, FluidFlow, MATLAB, CFD packages, ANSYS, or similar Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Mechanical Engineering Discipline team: This is an exciting opportunity to join the SSN AUKUS Platform Mechanical Integrated Delivery Team as a Principal Mechanical Design Engineer, where you'll serve as a technical specialist for some of the submarine's most critical compressible and incompressible fluid systems. In this role, you'll take ownership of high-integrity mechanical designs that must perform flawlessly within one of the most demanding engineering environments in the world. You'll shape complex system solutions, influence platform-level decisions , and ensure designs meet the rigorous performance, safety, and environmental requirements unique to submarine engineering. This a chance to work at the forefront of next-generation naval capability, tackling challenging technical problems and contributing directly to one of the UK's most advanced defence programmes. We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 16th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.

7 month contract (initially) Up to £55.56 per hour umbrella (Inside IR35) Hybrid working (up to 4 days per week on site where required in either Basildon, Bristol or Southampton as preferred) Job Role: The successful candidate will be responsible for conducting Stress Analysis, communicating the results and advising on all aspects of Structural Engineering activities. The role will involve working with multi-discipline project teams and our Customers across the UK. What you ll do as a Principal Stress Engineer: Analyse and assess mechanical designs for strength, durability, performance and safety against regulatory and customer requirements using finite element techniques and classical hand calculations. Generate Finite Element Models and reports as per company requirements. Support the selection of manufacturing technologies and materials based on a sound understanding of material physical and mechanical properties and the mechanical fit, form and function of the product. Conduct structural and thermo-structural analyses of complex Products using Siemens NX. Advise/support on the development of mechanical structural designs to achieve the desired Product Requirements. Ensure compliance with all relevant legislative, regulatory and contractual requirements (based on recognised military/civil standards). Point of contact for assigned projects, advising on all aspects of stress and structural dynamics throughout the product lifecycle. Key Attributes: Essential: Application of a wide range of classical hand calculation techniques for static and dynamic loading conditions and fatigue assessment (Land, Naval or Airborne equipment). Experience of environmental test methods for design verification and working knowledge of design certification for land based and airborne equipment. Proven experience in the use of Finite Element Analysis software tools (preferably Siemens NX/Nastran) and techniques. Desirable: An understanding of the Pressure Equipment Directive 2014/68/EU. Experience in the design, analysis and test of electronics packaging and/or aerospace equipment. Experience in Thermal Analysis techniques and tool sets (IcePak, Siemens NX). Experience of manufacturing and joining techniques, engineering material properties.

Job Title: Principal HVAC Design Engineer Location: Barrow-in-Furness. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this role Salary: Circa £55,000 What you'll be doing: Lead the end-to-end development of cutting-edge HVAC systems, ensuring they meet demanding performance, safety, and environmental standards Create and review high-impact engineering artefacts - from specifications and P&IDs to calculations and 3D models Drive advanced thermal, airflow, and pressure analyses toto validate system performance in challenging conditions Transform complex requirements into robust, innovative, and verifiable design solutions that set the benchmark for excellence Guide and influence engineers, suppliers, and design partners, shaping best-in-class HVAC integration across the platform Enhance design standards and evaluate specialist equipment, contributing to reviews, hazard assessments, and lifecycle verification Your skills and experiences: Strong technical expertise in HVAC and mechanical system design, including psychometrics, thermal analysis , equipment specification, schematics and system balancing Proven experience working in complex or regulated industries, with knowledge of standards such as ISO 15138, BS EN 378, ASHRAE, or CIBSE Skilled in system performance assessment, design validation, modelling, and failure analysis Awareness of multi-disciplinary system integration challenges across structures, electrical, controls , safety, and installation Excellent technical communication and reporting abilities, engaging both internal and external stakeholders STEM degree (or equivalent experience), ideally working toward or holding professional registration (CEng preferred) Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Platform Mechanical Integrated Delivery Team: As a Principal HVAC Design Engineer, you'll be at the forefront of one of the UK's most advanced engineering programmes - leading the delivery of complex HVAC systems that shape the future of submarine platforms. You'll take ownership of high-impact systems, provide trusted technical authority, and work across multiple disciplines to drive innovative solutions into reality. You'll be part of the Platform Mechanical Integrated Delivery Team - a fast-moving, highly collaborative group of specialists pushing the boundaries of submarine engineering. This is a unique opportunity to work alongside experts from diverse backgrounds and partner organisations, contributing to mechanical capabilities that are critical to the success of the entire platform We offer relocation support across all Submarine roles, subject to meeting eligibility criteria Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc .) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 15th January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.