CNC Miller Setter/Programmer (Mazak) Leicester (LE4) Monday - Friday rotation (details below) Urgent: Full Time We are looking for an experienced CNC Miller Setter/Programmer who is looking to take their skills to the next level, with some seriously tight tolerance detailed work where the focus is quality over quantity. What you will be doing You will be setting & operating a few different CNC milling machines (not all at once) ranging from standard 3 axis & 5 axis machines and even the opportunity to learn how to set a 10 axis milling machine. Depending on the job you might be required to write programmes on the machine from drawings, but you will mainly be working from SOP's To be considered You must have experience as a CNC miller setter/operator, be able to read engineering drawings and self-inspecting your own work. You need to have experience working to tight tolerances (micron or even sub-micron) Writing programmes with Mazak controls is essential for this one. Shift Days - Monday to Thursday 06:00 - 13:30 & Friday 13:00 finish Afternoon - Monday to Thursday 13:30 - 21:00 & Friday 20:00 finish In return - this role offers you: £34,000 - £38,000 salary depending on experience Enhanced rates for overtime (plenty available right now) Excellent facilities. Job security. Tight knit team A hands on manager who rose through the ranks This is working for a market leading company that is the go to for their sector. Even though the company is huge the machining team is close and tight, the manager worked their way up through the ranks and started hands on so still has the skills. APPLY NOW Applying is easy, just respond back to this advert with your CV clearly showing the skills needed or call the SolviT office and ask for Nathan. Everyone will receive a reply, but please do ensure your CV is relevant. JBRP1_UKTJ
Dec 19, 2025
Full time
CNC Miller Setter/Programmer (Mazak) Leicester (LE4) Monday - Friday rotation (details below) Urgent: Full Time We are looking for an experienced CNC Miller Setter/Programmer who is looking to take their skills to the next level, with some seriously tight tolerance detailed work where the focus is quality over quantity. What you will be doing You will be setting & operating a few different CNC milling machines (not all at once) ranging from standard 3 axis & 5 axis machines and even the opportunity to learn how to set a 10 axis milling machine. Depending on the job you might be required to write programmes on the machine from drawings, but you will mainly be working from SOP's To be considered You must have experience as a CNC miller setter/operator, be able to read engineering drawings and self-inspecting your own work. You need to have experience working to tight tolerances (micron or even sub-micron) Writing programmes with Mazak controls is essential for this one. Shift Days - Monday to Thursday 06:00 - 13:30 & Friday 13:00 finish Afternoon - Monday to Thursday 13:30 - 21:00 & Friday 20:00 finish In return - this role offers you: £34,000 - £38,000 salary depending on experience Enhanced rates for overtime (plenty available right now) Excellent facilities. Job security. Tight knit team A hands on manager who rose through the ranks This is working for a market leading company that is the go to for their sector. Even though the company is huge the machining team is close and tight, the manager worked their way up through the ranks and started hands on so still has the skills. APPLY NOW Applying is easy, just respond back to this advert with your CV clearly showing the skills needed or call the SolviT office and ask for Nathan. Everyone will receive a reply, but please do ensure your CV is relevant. JBRP1_UKTJ
CNC Miller (Operator/ Setter/Offline Programmer) - DAYS £19 p/h - £21 p/h + Monday to Friday + Overtime Nuneaton Are you a CNC Miller Operator/Setter/Offline Programmer looking for a days-based role, Monday to Friday, with the option for overtime to boost earnings? This company is a long-established, family-run precision engineering company based in Nuneaton click apply for full job details
Dec 18, 2025
Full time
CNC Miller (Operator/ Setter/Offline Programmer) - DAYS £19 p/h - £21 p/h + Monday to Friday + Overtime Nuneaton Are you a CNC Miller Operator/Setter/Offline Programmer looking for a days-based role, Monday to Friday, with the option for overtime to boost earnings? This company is a long-established, family-run precision engineering company based in Nuneaton click apply for full job details
CNC Miller, Programmer, Setter Days Available £18.00 - £20.00 Per Hour Overtime and Benefits Cheltenham The Company A successful manufacture of precision engineered components are looking for an experienced CNC Miller, Programmer, Setter, Operator to join their team. The company produce batch work parts for the Aerospace, Automotive industries click apply for full job details
Dec 18, 2025
Full time
CNC Miller, Programmer, Setter Days Available £18.00 - £20.00 Per Hour Overtime and Benefits Cheltenham The Company A successful manufacture of precision engineered components are looking for an experienced CNC Miller, Programmer, Setter, Operator to join their team. The company produce batch work parts for the Aerospace, Automotive industries click apply for full job details
CNC Miller, Setter, Operator- Fanuc or Heidenhain £18.00 - £20.00 Per Hour Overtime & Benefits Poole The Company - CNC Miller, Setter, Operator- Fanuc or Heidenhain A precision engineering company based in Poole are looking for a CNC Miller, Setter, Operator to join their growing team. The company have continued growth year on year and are offering a fantastic opportunity for the right engineer to work click apply for full job details
Dec 18, 2025
Full time
CNC Miller, Setter, Operator- Fanuc or Heidenhain £18.00 - £20.00 Per Hour Overtime & Benefits Poole The Company - CNC Miller, Setter, Operator- Fanuc or Heidenhain A precision engineering company based in Poole are looking for a CNC Miller, Setter, Operator to join their growing team. The company have continued growth year on year and are offering a fantastic opportunity for the right engineer to work click apply for full job details
Swift Temps South West
Cheltenham, Gloucestershire
Swift Gloucester, are looking to recruit an experienced and enthusiastic Fanuc & Heidenhain Milling Programmer/Setter. The candidate would need to have a strong background in CNC milling with a minimum of 5 years programming experience. As a Programmer/Setter/Operator you would be expected to have knowledge of a manufacturing environment, assisting the flow of work through the machine shop, with s click apply for full job details
Dec 18, 2025
Full time
Swift Gloucester, are looking to recruit an experienced and enthusiastic Fanuc & Heidenhain Milling Programmer/Setter. The candidate would need to have a strong background in CNC milling with a minimum of 5 years programming experience. As a Programmer/Setter/Operator you would be expected to have knowledge of a manufacturing environment, assisting the flow of work through the machine shop, with s click apply for full job details
CNC Miller (4 Days a Week) £17 - £19 an hour + Overtime (OTE £60,000) + Days Based + Monday to Thursday Chard Are you a CNC Miller looking for a Monday to Thursday, days-based role with flexible hours, for a large and long-standing company offer a great working environment and plenty of optional overtime? In this role you will be working in a large, clean, and modern workshop consisting of over 50 CNC machines. Working on a range of milling machines you will be trained up on different programming languages, then producing a range of small and large batch components. Founded over 50 years ago, this machining company have received large investment recently allowing exponential growth and new machinery in the workshop. This role would suit a CNC Machinist who can set, operate and programme milling machines looking to join a stable and secure company offering just a 4-day working week. The Role: Setting, operating and programming milling machines Using Siemens, Fanuc, Mazatrol or Heidenhain controls Specific training given on any controls you haven't used before Monday to Thursday or Tuesday to Friday 7am to 5:15am, or 7:45am to 6pm, 39 hours a week The Person: CNC Miller Setting, Operating, and Programming experience Reference Number: BBBH22645fourdays CNC, Setter, Programmer, Machinist, Manufacturing, Engineering, Production, Chard, Taunton, Yeovil, Operator, Siemens, Fanuc, Mazatrol, Heidenhain, Engineer, Set, Operate, Milling, Mill, Mills If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ
Dec 16, 2025
Full time
CNC Miller (4 Days a Week) £17 - £19 an hour + Overtime (OTE £60,000) + Days Based + Monday to Thursday Chard Are you a CNC Miller looking for a Monday to Thursday, days-based role with flexible hours, for a large and long-standing company offer a great working environment and plenty of optional overtime? In this role you will be working in a large, clean, and modern workshop consisting of over 50 CNC machines. Working on a range of milling machines you will be trained up on different programming languages, then producing a range of small and large batch components. Founded over 50 years ago, this machining company have received large investment recently allowing exponential growth and new machinery in the workshop. This role would suit a CNC Machinist who can set, operate and programme milling machines looking to join a stable and secure company offering just a 4-day working week. The Role: Setting, operating and programming milling machines Using Siemens, Fanuc, Mazatrol or Heidenhain controls Specific training given on any controls you haven't used before Monday to Thursday or Tuesday to Friday 7am to 5:15am, or 7:45am to 6pm, 39 hours a week The Person: CNC Miller Setting, Operating, and Programming experience Reference Number: BBBH22645fourdays CNC, Setter, Programmer, Machinist, Manufacturing, Engineering, Production, Chard, Taunton, Yeovil, Operator, Siemens, Fanuc, Mazatrol, Heidenhain, Engineer, Set, Operate, Milling, Mill, Mills If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ
Rise Technical Recruitment Limited
York, Yorkshire
CNC Machinist (Days) £35,000 - £36,000 (OTE £42,000) + Training + Progression + Great Work/Life Balance + Excellent Company Benefits Ideally Located: Kirkbymoorside, Pickering, Malton, Scarborough, Helmsley, Thirsk Are you a CNC Miller looking to join a well-established manufacturer in a secure, days-based role offering a 4-day working week and excellent training? This is a fantastic opportunity to join a growing company with further training on CNC programming and a range of machinery. The company is a manufacturer supplying a stable industry. They have invested massively in their growth recently and are looking to add to their team of Machinists to help drive this. They ensure all engineers are industry experts through training and development. You will set, operate and edit programmes on CNC machinery to manufacture a broad range of products, while gaining further experience and maintaining a great work/life balance. This role would suit a CNC Miller looking to join a company that offers career development and a 4-day working week. The Role: Setting, operating and programming CNC machinery 4-Day Week (No Nights) Training + Progression + Excellent Benefits The Person: CNC Miller Setting and Operating experience Commutable to York CNC Machinist, CNC Programmer, Programming, CNC Miller, Milling, CNC Turner, Computer Numerical Control, Operator, Operating, Machining, Setting, Setter, Kirkbymoorside, Pickering, Malton, Scarborough, Helmsley, Thirsk Reference Number: BBBH266205 To apply for this role or to be considered for further roles, please click 'Apply Now' or contact Josh Cooper at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts as an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. JBRP1_UKTJ
Dec 16, 2025
Full time
CNC Machinist (Days) £35,000 - £36,000 (OTE £42,000) + Training + Progression + Great Work/Life Balance + Excellent Company Benefits Ideally Located: Kirkbymoorside, Pickering, Malton, Scarborough, Helmsley, Thirsk Are you a CNC Miller looking to join a well-established manufacturer in a secure, days-based role offering a 4-day working week and excellent training? This is a fantastic opportunity to join a growing company with further training on CNC programming and a range of machinery. The company is a manufacturer supplying a stable industry. They have invested massively in their growth recently and are looking to add to their team of Machinists to help drive this. They ensure all engineers are industry experts through training and development. You will set, operate and edit programmes on CNC machinery to manufacture a broad range of products, while gaining further experience and maintaining a great work/life balance. This role would suit a CNC Miller looking to join a company that offers career development and a 4-day working week. The Role: Setting, operating and programming CNC machinery 4-Day Week (No Nights) Training + Progression + Excellent Benefits The Person: CNC Miller Setting and Operating experience Commutable to York CNC Machinist, CNC Programmer, Programming, CNC Miller, Milling, CNC Turner, Computer Numerical Control, Operator, Operating, Machining, Setting, Setter, Kirkbymoorside, Pickering, Malton, Scarborough, Helmsley, Thirsk Reference Number: BBBH266205 To apply for this role or to be considered for further roles, please click 'Apply Now' or contact Josh Cooper at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts as an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. JBRP1_UKTJ
Job Title: CNC Milling Setter/Operators Location: Gloucester Pay Range: £30,339.75 - £36,000.00 Contract Type: Perm My client a dynamic organization is looking for a CNC machinist to join their team in Gloucester. To work across diverse, high-impact industries such as aerospace, defence, and high-performance automotive. The successful candidate will be responsible for setting and operating a range of milling machines, primarily milling centres and routers with Fanuc/Haas controls. You will be expected to ensure the production of high-quality components that meet customer specifications, with a focus on precision and efficiency. Key Responsibilities - CNC Milling Set and operate CNC milling machines, primarily Haas and Fanuc-controlled machines. Read and work from technical drawings to ensure proper machine setup and component production. Load and edit NC programs on the machine controls as required. Prepare and load materials and components for machining operations. Ensure work is produced within specified tolerances and quality standards. Perform inspections and measurements on finished components, recording results on in-process inspection sheets. Utilize the ERP system (IFS) for daily responsibilities and tasks. Report any machine or production issues promptly to the Supervisor/Manager. Maintain a proactive approach to Health & Safety, ensuring both personal and team safety. Be flexible with duties and take on additional tasks that align with the role. Adhere to all company policies and maintain a positive working environment. Qualifications & Requirements - CNC Milling Proven experience in setting and operating CNC milling machines, specifically routers and milling centres. Completed a relevant apprenticeship in engineering or hold a minimum of Level 3 NVQ or City & Guilds in a related field (desirable). Hands-on experience producing precision components from composite materials, aluminium, and plastics. Confident and independent operation of Fanuc/Haas-controlled machines. Ability to load and edit NC programs on the machine control. Proficient in reading and interpreting technical drawings. Strong understanding of M and G codes used in CNC programming. Knowledge of basic measurement principles and quality control standards. Ability to complete quality documentation and effectively communicate with supervisors and quality control teams. Familiarity with Health & Safety standards and a proactive approach to maintaining a safe working environment. What we can offer - CNC Milling Competitive salary based on experience. Full-time, permanent role with regular working hours. Opportunities for training and development in a dynamic, growing company. A collaborative and supportive working environment. For more information on this role, please contact Harvey Clough on or send a copy of your CV to Omega Resource Group is an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. Candidates who are currently a Lathe Operator, Precision Machinist, CNC Machinist, CNC Setter, CNC Lathe Operator. Could be suitable for this role. For details of other opportunities available within your chosen field please visit our website Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. JBRP1_UKTJ
Dec 16, 2025
Full time
Job Title: CNC Milling Setter/Operators Location: Gloucester Pay Range: £30,339.75 - £36,000.00 Contract Type: Perm My client a dynamic organization is looking for a CNC machinist to join their team in Gloucester. To work across diverse, high-impact industries such as aerospace, defence, and high-performance automotive. The successful candidate will be responsible for setting and operating a range of milling machines, primarily milling centres and routers with Fanuc/Haas controls. You will be expected to ensure the production of high-quality components that meet customer specifications, with a focus on precision and efficiency. Key Responsibilities - CNC Milling Set and operate CNC milling machines, primarily Haas and Fanuc-controlled machines. Read and work from technical drawings to ensure proper machine setup and component production. Load and edit NC programs on the machine controls as required. Prepare and load materials and components for machining operations. Ensure work is produced within specified tolerances and quality standards. Perform inspections and measurements on finished components, recording results on in-process inspection sheets. Utilize the ERP system (IFS) for daily responsibilities and tasks. Report any machine or production issues promptly to the Supervisor/Manager. Maintain a proactive approach to Health & Safety, ensuring both personal and team safety. Be flexible with duties and take on additional tasks that align with the role. Adhere to all company policies and maintain a positive working environment. Qualifications & Requirements - CNC Milling Proven experience in setting and operating CNC milling machines, specifically routers and milling centres. Completed a relevant apprenticeship in engineering or hold a minimum of Level 3 NVQ or City & Guilds in a related field (desirable). Hands-on experience producing precision components from composite materials, aluminium, and plastics. Confident and independent operation of Fanuc/Haas-controlled machines. Ability to load and edit NC programs on the machine control. Proficient in reading and interpreting technical drawings. Strong understanding of M and G codes used in CNC programming. Knowledge of basic measurement principles and quality control standards. Ability to complete quality documentation and effectively communicate with supervisors and quality control teams. Familiarity with Health & Safety standards and a proactive approach to maintaining a safe working environment. What we can offer - CNC Milling Competitive salary based on experience. Full-time, permanent role with regular working hours. Opportunities for training and development in a dynamic, growing company. A collaborative and supportive working environment. For more information on this role, please contact Harvey Clough on or send a copy of your CV to Omega Resource Group is an employment agency specialising in opportunities at all levels within the Engineering, Aerospace, Automotive, Electronics, Defence, Scientific, Oil & Gas, Construction and Manufacturing sectors. Candidates who are currently a Lathe Operator, Precision Machinist, CNC Machinist, CNC Setter, CNC Lathe Operator. Could be suitable for this role. For details of other opportunities available within your chosen field please visit our website Omega is an employment agency specialising in opportunities at all levels within the Engineering, Manufacturing, Aerospace, Automotive, Electronics, Defence, Scientific, Energy & Renewables and Tech sectors. JBRP1_UKTJ
CNC Miller Setter/Operator Salary: £14 - £16 p/hr Monday - Friday 07:30 - 16:30 (early finish Friday) Exhall Full Time Permanent We are looking for an experienced CNC Miller setter/operator This is working with a down to earth company that will listen to you and work with you all day, there isnt any micro management at all, as long as the job is done they are happy. What will you be doing? You will be working on CNC Millers up to 5 axis, to work on low volume runs working to tight tolerances and even some prototype work. If you edit programme with Fanuc controls it will be a benefit. There will also be the option to learn to write programmes from scratch here to develop your skills further. What will make you stand out from the crowd? Strong experience as a CNC Miller Setter/Operator Stable career history Able to edit programmes (benefit) Just as important as your experience, you need a good attitude. If you have the right attitude and a solid base for experience, the company will develop your skills and train you. What do you get out of this? £14 - £16 p/hr DOE Job Security Work variety Career progression Fantastic team Supportive MD Relaxed and secure company This is working with a company that specialises in small batch & prototype work, has a welcoming environment where the people are down to earth and simply happy to work and get the job done. If you have the skills and the knowledge to just walk in crack on and nail the job apply now. APPLY NOW - Applying is easy, and there are 2 ways to do it: Have you read the job advert and feel that you are the perfect person? If that's the case, then give Nathan Carlow a call at SolviT Recruitment NOW on 818999.Do you have experience but are not sure it's enough? Then reply to this advert with your CV, and we can tell you. JBRP1_UKTJ
Dec 16, 2025
Full time
CNC Miller Setter/Operator Salary: £14 - £16 p/hr Monday - Friday 07:30 - 16:30 (early finish Friday) Exhall Full Time Permanent We are looking for an experienced CNC Miller setter/operator This is working with a down to earth company that will listen to you and work with you all day, there isnt any micro management at all, as long as the job is done they are happy. What will you be doing? You will be working on CNC Millers up to 5 axis, to work on low volume runs working to tight tolerances and even some prototype work. If you edit programme with Fanuc controls it will be a benefit. There will also be the option to learn to write programmes from scratch here to develop your skills further. What will make you stand out from the crowd? Strong experience as a CNC Miller Setter/Operator Stable career history Able to edit programmes (benefit) Just as important as your experience, you need a good attitude. If you have the right attitude and a solid base for experience, the company will develop your skills and train you. What do you get out of this? £14 - £16 p/hr DOE Job Security Work variety Career progression Fantastic team Supportive MD Relaxed and secure company This is working with a company that specialises in small batch & prototype work, has a welcoming environment where the people are down to earth and simply happy to work and get the job done. If you have the skills and the knowledge to just walk in crack on and nail the job apply now. APPLY NOW - Applying is easy, and there are 2 ways to do it: Have you read the job advert and feel that you are the perfect person? If that's the case, then give Nathan Carlow a call at SolviT Recruitment NOW on 818999.Do you have experience but are not sure it's enough? Then reply to this advert with your CV, and we can tell you. JBRP1_UKTJ
Swift Temps South West
Cheltenham, Gloucestershire
Swift Gloucester, are looking to recruit an experienced and enthusiastic Fanuc & Heidenhain Milling Programmer/Setter. The candidate would need to have a strong background in CNC milling with a minimum of 5 years programming experience. As a Programmer/Setter/Operator you would be expected to have knowledge of a manufacturing environment, assisting the flow of work through the machine shop, with setting and programming milling centres as a priority and good knowledge of surrounding machine upkeep. This is a full-time position, with remuneration negotiable depending on experience, 40hrs shift , from 7am until 4pm from Monday until Thursday and from 7am until 1pm on Friday. The role also offers progression potential for the right candidate. Programming & Technical Expertise Develop offline CNC programs for simultaneous 4-5-axis machining operations using CAD CAM software. Interpret 3D CAD models, engineering drawings, and technical specifications to generate efficient toolpaths. Define machining strategies and select appropriate cutting tools, feeds, speeds, and tolerances to optimise cycle times and surface finish. Simulate and verify toolpaths to prevent collisions and ensure part accuracy prior to production. Familiarity with Fanuc and Heidenhain control system is essential. Machine Setup and Operational Support Collaborate with machinists and shop floor staff to validate programs during initial setups and resolve any on-machine issues. Provide setup sheets, tool lists, and fixture instructions for production use. Assist in proving out new programs and implementing changes based on machine behaviour or material characteristics. This may involve elements of setting. Process Optimisation Continuous improvement of CNC programs for efficiency, repeatability and cost reduction. Understanding of Lean Manufacturing Principles is desirable. Identify opportunities for automation, better tooling, or advanced machining techniques. Reduce scrap and rework by ensuring high-quality output from the first part. Collaboration & Communication Work closely with production team, and quality inspectors to ensure quality and delivery targets are met. Proven experience of training and mentor other team members. Compliance & Safety Ensure all programming complies with company and industry quality standards, tolerances and safety requirements. Follow best practices for material handling, machine operation, and software usage. Stay updated on new CAD/CAM software capabilities, CNC technologies, and industry trends. Adhere to health and safety regulations and company policies. Qualifications and Skills: Strong background in CNC milling with a minimum of 5 years programming experience, within a manufacturing environment and minimum of 10 on operating machines Proficiency in reading and interpreting technical drawings and specifications. Knowledge of CNC programming and machine setup. Familiarity with precision measuring tools and quality control processes. Strong problem-solving skills and mechanical aptitude. Ability to work independently and as part of a team. Attention to detail and commitment to producing high-quality work. Desirable: Apprenticeship or formal training in CNC machining or a related field. Experience with various CNC control systems. Please note that this role will be offered subject to satisfactory references. As part of our recruitment process, all candidates will be asked to provide evidence of their right to work in the UK. Swift are acting as an employment agency with regards to this vacancy. Please call Dave on / for a confidential chat. JBRP1_UKTJ
Dec 16, 2025
Full time
Swift Gloucester, are looking to recruit an experienced and enthusiastic Fanuc & Heidenhain Milling Programmer/Setter. The candidate would need to have a strong background in CNC milling with a minimum of 5 years programming experience. As a Programmer/Setter/Operator you would be expected to have knowledge of a manufacturing environment, assisting the flow of work through the machine shop, with setting and programming milling centres as a priority and good knowledge of surrounding machine upkeep. This is a full-time position, with remuneration negotiable depending on experience, 40hrs shift , from 7am until 4pm from Monday until Thursday and from 7am until 1pm on Friday. The role also offers progression potential for the right candidate. Programming & Technical Expertise Develop offline CNC programs for simultaneous 4-5-axis machining operations using CAD CAM software. Interpret 3D CAD models, engineering drawings, and technical specifications to generate efficient toolpaths. Define machining strategies and select appropriate cutting tools, feeds, speeds, and tolerances to optimise cycle times and surface finish. Simulate and verify toolpaths to prevent collisions and ensure part accuracy prior to production. Familiarity with Fanuc and Heidenhain control system is essential. Machine Setup and Operational Support Collaborate with machinists and shop floor staff to validate programs during initial setups and resolve any on-machine issues. Provide setup sheets, tool lists, and fixture instructions for production use. Assist in proving out new programs and implementing changes based on machine behaviour or material characteristics. This may involve elements of setting. Process Optimisation Continuous improvement of CNC programs for efficiency, repeatability and cost reduction. Understanding of Lean Manufacturing Principles is desirable. Identify opportunities for automation, better tooling, or advanced machining techniques. Reduce scrap and rework by ensuring high-quality output from the first part. Collaboration & Communication Work closely with production team, and quality inspectors to ensure quality and delivery targets are met. Proven experience of training and mentor other team members. Compliance & Safety Ensure all programming complies with company and industry quality standards, tolerances and safety requirements. Follow best practices for material handling, machine operation, and software usage. Stay updated on new CAD/CAM software capabilities, CNC technologies, and industry trends. Adhere to health and safety regulations and company policies. Qualifications and Skills: Strong background in CNC milling with a minimum of 5 years programming experience, within a manufacturing environment and minimum of 10 on operating machines Proficiency in reading and interpreting technical drawings and specifications. Knowledge of CNC programming and machine setup. Familiarity with precision measuring tools and quality control processes. Strong problem-solving skills and mechanical aptitude. Ability to work independently and as part of a team. Attention to detail and commitment to producing high-quality work. Desirable: Apprenticeship or formal training in CNC machining or a related field. Experience with various CNC control systems. Please note that this role will be offered subject to satisfactory references. As part of our recruitment process, all candidates will be asked to provide evidence of their right to work in the UK. Swift are acting as an employment agency with regards to this vacancy. Please call Dave on / for a confidential chat. JBRP1_UKTJ
Swift Temps South West
Gloucester, Gloucestershire
Swift Gloucester, are looking to recruit an experienced and enthusiastic Fanuc & Heidenhain Milling Programmer/Setter. The candidate would need to have a strong background in CNC milling with a minimum of 5 years programming experience. As a Programmer/Setter/Operator you would be expected to have knowledge of a manufacturing environment, assisting the flow of work through the machine shop, with s
Dec 16, 2025
Full time
Swift Gloucester, are looking to recruit an experienced and enthusiastic Fanuc & Heidenhain Milling Programmer/Setter. The candidate would need to have a strong background in CNC milling with a minimum of 5 years programming experience. As a Programmer/Setter/Operator you would be expected to have knowledge of a manufacturing environment, assisting the flow of work through the machine shop, with s
CNC Miller & Milling Team Leader Opportunities Location: Kings Langley, Hertfordshire Salary: Competitive, DOE Benefits Modern, fully equipped machine shop featuring brand-new CNC machine tools and the latest software. Transparent and inclusive management culture. 25 days holiday plus Bank Holidays. Company pension scheme. Free onsite parking. Continuous training and long-term career development opportunities. Company Profile A well-established subcontract precision machining company supplying a wide range of sectors. The business operates to recognised quality standards and offers comprehensive capabilities in CNC Milling, CNC Turning, EDM processes and subcontract inspection. Continued growth and significant investment in new technology have created multiple opportunities within the Milling department. Current Vacancies 1. CNC Miller Setter/Operator (Nights) 2. Team Leader Milling Department (Nights) Both roles require individuals who are motivated, quality-driven and able to communicate effectively within a high-performance engineering environment, and willing to work Night shift. Role Overview Due to ongoing expansion and investment in advanced CNC machinery, JK Engineering is seeking experienced CNC Machinists to join the Milling team. Successful applicants will have strong attention to detail, a proactive approach to problem-solving, and at least 3+ years experience in CNC Milling. 5-axis experience is essential for both roles. The Team Leader vacancy is available for those with leadership capability and experience coordinating workflow within a milling environment. Key Duties Setting and operating 5-axis CNC machining centres. (Heidenhain experience beneficial but not essential.) Producing small, complex, precision components to tight tolerances and strict quality standards. Participating in continuous improvement activities. Machining a wide range of materials, including aluminium, steels, titanium, super alloys, and engineering plastics when required. Reading and interpreting engineering drawings accurately. Proving out, setting and operating CNC programs and tooling for 5-axis machining. Skills & Experience Required Minimum 3 years experience in CNC Milling. Proven competence with 5-axis machining. Ability to set and operate milling centres independently. Strong understanding of engineering drawings and machining best practice. For the Team Leader position: experience leading a small team, coordinating workload, and supporting junior machinists. Hours of Work Monday to Thursday 5:00pm to 5:00am Regular overtime available (typically 510+ hours per week, paid at x1.5). Interested? If youre an experienced CNC Miller looking for a fresh challenge - or a skilled machinist ready to step up into a Team Leader role - wed love to hear from you. Please get in touch to discuss the opportunities further or to submit your application Bolt-On Personneland our clients are equal opportunity employers who seek to recruit and appoint the best available person for a job regardless of marital/civil partnership status, sex, age, religion, belief, race, nationality and ethnic or national origin, colour, sexual orientation or disability. Bolt-On Personnel and our clients apply all relevant Data Protection laws when processing your Personal Data. If you choose to apply to this opportunity and share your CV or other personal information with Bolt-On Personnel, these details will be held by us in accordance with our privacy policy used by our recruitment team to contact you regarding this or other relevant opportunities at Bolt-On Personnel. JBRP1_UKTJ
Dec 15, 2025
Full time
CNC Miller & Milling Team Leader Opportunities Location: Kings Langley, Hertfordshire Salary: Competitive, DOE Benefits Modern, fully equipped machine shop featuring brand-new CNC machine tools and the latest software. Transparent and inclusive management culture. 25 days holiday plus Bank Holidays. Company pension scheme. Free onsite parking. Continuous training and long-term career development opportunities. Company Profile A well-established subcontract precision machining company supplying a wide range of sectors. The business operates to recognised quality standards and offers comprehensive capabilities in CNC Milling, CNC Turning, EDM processes and subcontract inspection. Continued growth and significant investment in new technology have created multiple opportunities within the Milling department. Current Vacancies 1. CNC Miller Setter/Operator (Nights) 2. Team Leader Milling Department (Nights) Both roles require individuals who are motivated, quality-driven and able to communicate effectively within a high-performance engineering environment, and willing to work Night shift. Role Overview Due to ongoing expansion and investment in advanced CNC machinery, JK Engineering is seeking experienced CNC Machinists to join the Milling team. Successful applicants will have strong attention to detail, a proactive approach to problem-solving, and at least 3+ years experience in CNC Milling. 5-axis experience is essential for both roles. The Team Leader vacancy is available for those with leadership capability and experience coordinating workflow within a milling environment. Key Duties Setting and operating 5-axis CNC machining centres. (Heidenhain experience beneficial but not essential.) Producing small, complex, precision components to tight tolerances and strict quality standards. Participating in continuous improvement activities. Machining a wide range of materials, including aluminium, steels, titanium, super alloys, and engineering plastics when required. Reading and interpreting engineering drawings accurately. Proving out, setting and operating CNC programs and tooling for 5-axis machining. Skills & Experience Required Minimum 3 years experience in CNC Milling. Proven competence with 5-axis machining. Ability to set and operate milling centres independently. Strong understanding of engineering drawings and machining best practice. For the Team Leader position: experience leading a small team, coordinating workload, and supporting junior machinists. Hours of Work Monday to Thursday 5:00pm to 5:00am Regular overtime available (typically 510+ hours per week, paid at x1.5). Interested? If youre an experienced CNC Miller looking for a fresh challenge - or a skilled machinist ready to step up into a Team Leader role - wed love to hear from you. Please get in touch to discuss the opportunities further or to submit your application Bolt-On Personneland our clients are equal opportunity employers who seek to recruit and appoint the best available person for a job regardless of marital/civil partnership status, sex, age, religion, belief, race, nationality and ethnic or national origin, colour, sexual orientation or disability. Bolt-On Personnel and our clients apply all relevant Data Protection laws when processing your Personal Data. If you choose to apply to this opportunity and share your CV or other personal information with Bolt-On Personnel, these details will be held by us in accordance with our privacy policy used by our recruitment team to contact you regarding this or other relevant opportunities at Bolt-On Personnel. JBRP1_UKTJ
CNC Turner (Days-based / Monday-Friday) £30,000 - £40,000 + Overtime + Training + Progression + Early Finish on a Friday + Company Bonus + Company Benefits Crewkerne Are you a CNC Turner or similar looking for a days-based Monday-Friday role within a stable, long-established company who are known for looking after and developing their staff in a role offering a good work life balance and a company bonus to increase your earnings? This global company have a presence across multiple continents and have seen major success since their establishment over 100 years ago. They provide primarily bespoke castings as well as other products for a broad client base and are now looking to grow their friendly team. In this varied role you will primarily carry out setting and operating of both CNC lathes for specialist casting projects. You will be part of a large team on site, providing support for junior members in addition to receiving programming training from seniors as you work Monday-Friday with an early finish on a Friday. This varied role would suit a CNC Turner looking for a permanent, local role within a global leading company offering a good work life balance and optional overtime to increase earnings. The Role: Set and Operate CNC Lathes Work on specialist casting projects Training on programming provided Monday-Thursday 07:30-16:30, Friday 07:30-13:00 The Person: CNC Turner Looking for a days-based role Commutable to Crewkerne Reference: BBBH23047 CNC, Setter, Operator, Miller, Turner, Lathe, Programmer, Days-based, Monday-Friday, Manufacturing, Aerospace, Automotive, South West, Yeovil, Crewkerne If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ
Dec 14, 2025
Full time
CNC Turner (Days-based / Monday-Friday) £30,000 - £40,000 + Overtime + Training + Progression + Early Finish on a Friday + Company Bonus + Company Benefits Crewkerne Are you a CNC Turner or similar looking for a days-based Monday-Friday role within a stable, long-established company who are known for looking after and developing their staff in a role offering a good work life balance and a company bonus to increase your earnings? This global company have a presence across multiple continents and have seen major success since their establishment over 100 years ago. They provide primarily bespoke castings as well as other products for a broad client base and are now looking to grow their friendly team. In this varied role you will primarily carry out setting and operating of both CNC lathes for specialist casting projects. You will be part of a large team on site, providing support for junior members in addition to receiving programming training from seniors as you work Monday-Friday with an early finish on a Friday. This varied role would suit a CNC Turner looking for a permanent, local role within a global leading company offering a good work life balance and optional overtime to increase earnings. The Role: Set and Operate CNC Lathes Work on specialist casting projects Training on programming provided Monday-Thursday 07:30-16:30, Friday 07:30-13:00 The Person: CNC Turner Looking for a days-based role Commutable to Crewkerne Reference: BBBH23047 CNC, Setter, Operator, Miller, Turner, Lathe, Programmer, Days-based, Monday-Friday, Manufacturing, Aerospace, Automotive, South West, Yeovil, Crewkerne If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ
CNC Miller, Setter, Operator- Fanuc or Heidenhain£18.00 - £20.00 Per HourOvertime & BenefitsPoole The Company - CNC Miller, Setter, Operator- Fanuc or HeidenhainA precision engineering company based in Poole are looking for a CNC Miller, Setter, Operator to join their growing team. The company have continued growth year on year and are offering a fantastic opportunity for the right engineer to work
Dec 12, 2025
Full time
CNC Miller, Setter, Operator- Fanuc or Heidenhain£18.00 - £20.00 Per HourOvertime & BenefitsPoole The Company - CNC Miller, Setter, Operator- Fanuc or HeidenhainA precision engineering company based in Poole are looking for a CNC Miller, Setter, Operator to join their growing team. The company have continued growth year on year and are offering a fantastic opportunity for the right engineer to work
CNC Miller, Programmer, Setter Days Available £18.00 - £20.00 Per Hour Overtime and Benefits Cheltenham The Company A successful manufacture of precision engineered components are looking for an experienced CNC Miller, Programmer, Setter, Operator to join their team. The company produce batch work parts for the Aerospace, Automotive industries. CNC Miller, Programmer, Setter Operator - Role The company ar
Dec 10, 2025
Full time
CNC Miller, Programmer, Setter Days Available £18.00 - £20.00 Per Hour Overtime and Benefits Cheltenham The Company A successful manufacture of precision engineered components are looking for an experienced CNC Miller, Programmer, Setter, Operator to join their team. The company produce batch work parts for the Aerospace, Automotive industries. CNC Miller, Programmer, Setter Operator - Role The company ar
