Orion Electrotech Sales
High Wycombe, Buckinghamshire
Principal Electronics Engineer Orion is working with a leading aerospace technology provider specialising in the design, development, and sustainment of complex systems and products are seeking a Principal Electronics Engineer to join the team. The company delivers innovative communication, navigation, and identification antenna solutions for demanding aerospace environments, committed to excellenc click apply for full job details
Mar 17, 2026
Full time
Principal Electronics Engineer Orion is working with a leading aerospace technology provider specialising in the design, development, and sustainment of complex systems and products are seeking a Principal Electronics Engineer to join the team. The company delivers innovative communication, navigation, and identification antenna solutions for demanding aerospace environments, committed to excellenc click apply for full job details
Senior Electrical Engineer, Drilling Systems, COR7503 Are you an experienced Electrical Engineer looking to work on innovative technology within the energy sector? If you have strong electronics design experience and enjoy working on complex engineering systems, then this could be the role for you! The Role This is an exciting Electrical Engineer position with a company focused on developing advanced click apply for full job details
Mar 17, 2026
Full time
Senior Electrical Engineer, Drilling Systems, COR7503 Are you an experienced Electrical Engineer looking to work on innovative technology within the energy sector? If you have strong electronics design experience and enjoy working on complex engineering systems, then this could be the role for you! The Role This is an exciting Electrical Engineer position with a company focused on developing advanced click apply for full job details
2 Senior Systems Engineers Inside IR35 81.05 per hour 6 months initial term This is a senior technical role relating to the Electronic aspects of hardware design for systems engineering. A highly experienced professional engineer with a depth and breadth of knowledge in Electronics Engineering who speaks and acts authoritatively on matters pertaining to their discipline, leading and applying the principles of Electronics Engineering across the entire engineering development lifecycle from requirement definition to system integration and customer acceptance into system support and disposal. Employs a depth and breadth of expertise relating to Electronics Systems Engineering to the most complex engineering problems, challenges, and issues associated with the domain. Designs, develops, promotes and shares discipline knowledge and capability for implementation across the business and programmes, providing authoritative guidance to others relating to area of expertise. Acts as design authority for designs that the role holder / team is undertaking. Liaises with other teams and disciplines to ensure a consistent approach across the whole radar system. Typical duties include : Providing support to the SDA regarding overall Radar System design. Responsible for defining and capturing digital requirements from board level to sub-system level. Provide digital techniques support to the SDA and techniques groups (RF, software, digits, mechanical, DO) at all stagers throughout the design life cycle. Provide support to digital techniques team throughout the design process ensuring adherence to established design protocols. Provide analysis of system architectures with a view to providing guidance on make/buy/COTS decisions. Define test and integration plans from board to system level. System Design Assurance - ensuring there is enough built in functionality to support design assurance. Also contributing to the generation of the system design assurance specification. Knowledge: Experience in digital electronics including FPGA development, high speed interfaces (such as serial FPDP, JESD204 etc) , COTS hardware and PCB design. Experience in sub-system and System integration and test. Familiarity with Xilinx/AMD FPGA products and Vivado design tools Experience in radar system data analysis. Experience in the whole design process from requirements to design assurance and sign off. A solid understanding of radar operation, in particular Active Electronically Scanned Array (AESA) radars. Skills: Experience using AMD/Xilinx Vitis. Experience designing with AMD/Xilinx Versal or Zynq Ultrascale plus devices Matlab for digital processing analysis MBSE for design capture DOORS for document capture Previous experience of operating in a defence or high safety integrity environment.
Mar 17, 2026
Contractor
2 Senior Systems Engineers Inside IR35 81.05 per hour 6 months initial term This is a senior technical role relating to the Electronic aspects of hardware design for systems engineering. A highly experienced professional engineer with a depth and breadth of knowledge in Electronics Engineering who speaks and acts authoritatively on matters pertaining to their discipline, leading and applying the principles of Electronics Engineering across the entire engineering development lifecycle from requirement definition to system integration and customer acceptance into system support and disposal. Employs a depth and breadth of expertise relating to Electronics Systems Engineering to the most complex engineering problems, challenges, and issues associated with the domain. Designs, develops, promotes and shares discipline knowledge and capability for implementation across the business and programmes, providing authoritative guidance to others relating to area of expertise. Acts as design authority for designs that the role holder / team is undertaking. Liaises with other teams and disciplines to ensure a consistent approach across the whole radar system. Typical duties include : Providing support to the SDA regarding overall Radar System design. Responsible for defining and capturing digital requirements from board level to sub-system level. Provide digital techniques support to the SDA and techniques groups (RF, software, digits, mechanical, DO) at all stagers throughout the design life cycle. Provide support to digital techniques team throughout the design process ensuring adherence to established design protocols. Provide analysis of system architectures with a view to providing guidance on make/buy/COTS decisions. Define test and integration plans from board to system level. System Design Assurance - ensuring there is enough built in functionality to support design assurance. Also contributing to the generation of the system design assurance specification. Knowledge: Experience in digital electronics including FPGA development, high speed interfaces (such as serial FPDP, JESD204 etc) , COTS hardware and PCB design. Experience in sub-system and System integration and test. Familiarity with Xilinx/AMD FPGA products and Vivado design tools Experience in radar system data analysis. Experience in the whole design process from requirements to design assurance and sign off. A solid understanding of radar operation, in particular Active Electronically Scanned Array (AESA) radars. Skills: Experience using AMD/Xilinx Vitis. Experience designing with AMD/Xilinx Versal or Zynq Ultrascale plus devices Matlab for digital processing analysis MBSE for design capture DOORS for document capture Previous experience of operating in a defence or high safety integrity environment.
2 Senior Systems Engineers Inside IR35 81.05 per hour 6 months initial term This is a senior technical role relating to the Electronic aspects of hardware design for systems engineering. A highly experienced professional engineer with a depth and breadth of knowledge in Electronics Engineering who speaks and acts authoritatively on matters pertaining to their discipline, leading and applying the principles of Electronics Engineering across the entire engineering development lifecycle from requirement definition to system integration and customer acceptance into system support and disposal. Employs a depth and breadth of expertise relating to Electronics Systems Engineering to the most complex engineering problems, challenges, and issues associated with the domain. Designs, develops, promotes and shares discipline knowledge and capability for implementation across the business and programmes, providing authoritative guidance to others relating to area of expertise. Acts as design authority for designs that the role holder / team is undertaking. Liaises with other teams and disciplines to ensure a consistent approach across the whole radar system. Typical duties include : Providing support to the SDA regarding overall Radar System design. Responsible for defining and capturing digital requirements from board level to sub-system level. Provide digital techniques support to the SDA and techniques groups (RF, software, digits, mechanical, DO) at all stagers throughout the design life cycle. Provide support to digital techniques team throughout the design process ensuring adherence to established design protocols. Provide analysis of system architectures with a view to providing guidance on make/buy/COTS decisions. Define test and integration plans from board to system level. System Design Assurance - ensuring there is enough built in functionality to support design assurance. Also contributing to the generation of the system design assurance specification. Knowledge: Experience in digital electronics including FPGA development, high speed interfaces (such as serial FPDP, JESD204 etc) , COTS hardware and PCB design. Experience in sub-system and System integration and test. Familiarity with Xilinx/AMD FPGA products and Vivado design tools Experience in radar system data analysis. Experience in the whole design process from requirements to design assurance and sign off. A solid understanding of radar operation, in particular Active Electronically Scanned Array (AESA) radars. Skills: Experience using AMD/Xilinx Vitis. Experience designing with AMD/Xilinx Versal or Zynq Ultrascale plus devices Matlab for digital processing analysis MBSE for design capture DOORS for document capture Previous experience of operating in a defence or high safety integrity environment.
Mar 16, 2026
Contractor
2 Senior Systems Engineers Inside IR35 81.05 per hour 6 months initial term This is a senior technical role relating to the Electronic aspects of hardware design for systems engineering. A highly experienced professional engineer with a depth and breadth of knowledge in Electronics Engineering who speaks and acts authoritatively on matters pertaining to their discipline, leading and applying the principles of Electronics Engineering across the entire engineering development lifecycle from requirement definition to system integration and customer acceptance into system support and disposal. Employs a depth and breadth of expertise relating to Electronics Systems Engineering to the most complex engineering problems, challenges, and issues associated with the domain. Designs, develops, promotes and shares discipline knowledge and capability for implementation across the business and programmes, providing authoritative guidance to others relating to area of expertise. Acts as design authority for designs that the role holder / team is undertaking. Liaises with other teams and disciplines to ensure a consistent approach across the whole radar system. Typical duties include : Providing support to the SDA regarding overall Radar System design. Responsible for defining and capturing digital requirements from board level to sub-system level. Provide digital techniques support to the SDA and techniques groups (RF, software, digits, mechanical, DO) at all stagers throughout the design life cycle. Provide support to digital techniques team throughout the design process ensuring adherence to established design protocols. Provide analysis of system architectures with a view to providing guidance on make/buy/COTS decisions. Define test and integration plans from board to system level. System Design Assurance - ensuring there is enough built in functionality to support design assurance. Also contributing to the generation of the system design assurance specification. Knowledge: Experience in digital electronics including FPGA development, high speed interfaces (such as serial FPDP, JESD204 etc) , COTS hardware and PCB design. Experience in sub-system and System integration and test. Familiarity with Xilinx/AMD FPGA products and Vivado design tools Experience in radar system data analysis. Experience in the whole design process from requirements to design assurance and sign off. A solid understanding of radar operation, in particular Active Electronically Scanned Array (AESA) radars. Skills: Experience using AMD/Xilinx Vitis. Experience designing with AMD/Xilinx Versal or Zynq Ultrascale plus devices Matlab for digital processing analysis MBSE for design capture DOORS for document capture Previous experience of operating in a defence or high safety integrity environment.
About the Role: Grade Level (for internal use): 11 The Team: We are seeking an experienced Research Manager to lead a global team of research analysts responsible for identifying and validating supply chain relationships across the automotive ecosystem. This role will set the research direction, strengthen methodologies, and ensure consistent, high-quality outputs across for the Procurement Intelligence research team. You will join a talented and intellectually curious team of analysts working creatively to build objective insights that automotive procurement and risk stakeholders rely on. S&P Global has recently announced the intent to separate our Mobility Segment into a standalone public company. For more information, visit Responsibilities and Impact: Define and execute the research approach and methodologies used to identify and validate suppliers and supply chain relationships across the automotive ecosystem. Lead and develop a distributed team of research analysts across multiple time zones, setting priorities, managing workloads, and ensuring timely delivery against SLAs and project timelines. Establish research best practices (source triangulation, confidence scoring, documentation standards, audit trails, and escalation paths) to ensure consistency, repeatability, and defensibility of outputs. Guide analysts on data sources and collection strategies, including how to select, evaluate, and triangulate sources to validate supplier relationships and trading activity. Implement quality assurance (QA) and continuous improvement, including regular calibration sessions, spot checks, root cause reviews of defects, and coaching to reduce rework and improve accuracy over time. Collaborate cross functionally with operations, product/development, and commercial teams to align research outputs with platform requirements, client needs, and go to market messaging. Identify new research opportunities that expand coverage and support business growth. Support customer facing engagements as needed, including methodology discussions, research readouts, and responding to client inquiries regarding data provenance and validation logic. What We're Looking For: Basic Required Qualifications: Bachelor's degree in Business, Engineering, Supply Chain Management or a related field. 5+ years of experience in research management, competitive intelligence, supply chain research, or a related role-preferably tied to automotive or global supply chains. Proven experience managing distributed teams (multiple time zones), including performance management, coaching, and operational execution. Demonstrated ability to design research methods and translate ambiguous questions into structured workflows, measurable outputs, and clear analyst instructions. Excellent written and verbal communication skills, including the ability to present research findings and defend methodology to internal and external stakeholders. Additional Preferred Qualifications: Strong understanding of automotive supply chain structures and/or procurement processes (supplier tiers, sourcing, localization, capacity constraints, and operational risk concepts). Domain expertise in Electronics & Semiconductor Systems, Powertrain & Chassis Systems, or Interior & Cabin Systems. Experience partnering with technical teams to operationalise research outputs into scalable datasets. Background in supplier discovery/validation using a mix of primary/secondary research (e.g., interviews, industry publications, trade data, corporate filings, customs/shipping signals). Experience building or managing quality programs (QA frameworks, rubrics, confidence scoring, SOPs, training curricula). Track record of publishing research (reports, briefings, client deliverables) or presenting insights to procurement, supply chain, risk, or executive audiences. Familiarity with global trade and compliance concepts relevant to automotive sourcing (e.g., sanctions/export controls exposure, country of origin considerations, forced labor screening workflows). Master's degree (MBA or related) is a plus. Compensation/Benefits Information: (This section is only applicable to US candidates) S&P Global states that the anticipated base salary range for this position is $91,805 to $181,560. Final base salary for this role will be based on the individual's geographic location, as well as experience level, skill set, training, licenses and certifications. In addition to base compensation, this role is eligible for an annual incentive plan. This role is not eligible for additional compensation such as an annual incentive bonus or sales commission plan. This role is eligible to receive additional S&P Global benefits. For more information on the benefits we provide to our employees, please click Here About S&P Global Mobility At S&P Global Mobility, we provide invaluable insights derived from unmatched automotive data, enabling our customers to anticipate change and make decisions with conviction. Our expertise helps them to optimise their businesses, reach the right consumers, and shape the future of mobility. We open the door to automotive innovation, revealing the buying patterns of today and helping customers plan for the emerging technologies of tomorrow. What's In It For You? Our Mission: Advancing Essential Intelligence. Our People: We're more than 35,000 strong worldwide-so we're able to understand nuances while having a broad perspective. Our team is driven by curiosity and a shared belief that Essential Intelligence can help build a more prosperous future for us all. From finding new ways to measure sustainability to analysing energy transition across the supply chain to building workflow solutions that make it easy to tap into insight and apply it. We are changing the way people see things and empowering them to make an impact on the world we live in. We're committed to a more equitable future and to helping our customers find new, sustainable ways of doing business. Join us and help create the critical insights that truly make a difference. Our Values: Integrity, Discovery, Partnership Benefits: We take care of you, so you can take care of business. We care about our people. That's why we provide everything you- and your career-need to thrive at S&P Global. Our benefits include: Health & Wellness: Health care coverage designed for the mind and body. Flexible Downtime: Generous time off helps keep you energized for your time on. Continuous Learning: Access a wealth of resources to grow your career and learn valuable new skills. Invest in Your Future: Secure your financial future through competitive pay, retirement planning, a continuing education programme with a company matched student loan contribution, and financial wellness programmes. Family Friendly Perks: It's not just about you. S&P Global has perks for your partners and little ones, too, with some best in class benefits for families. Beyond the Basics: From retail discounts to referral incentive awards-small perks can make a big difference. For more information on benefits by country visit: Global Hiring and Opportunity at S&P Global: At S&P Global, we are committed to fostering a connected and engaged workplace where all individuals have access to opportunities based on their skills, experience, and contributions. Our hiring practices emphasise fairness, transparency, and merit, ensuring that we attract and retain top talent. By valuing different perspectives and promoting a culture of respect and collaboration, we drive innovation and power global markets. Recruitment Fraud Alert: If you receive an email from a domain or any other regionally based domains, it is a scam and should be reported to . S&P Global never requires any candidate to pay money for job applications, interviews, offer letters, "pre employment training" or for equipment/delivery of equipment. Stay informed and protect yourself from recruitment fraud by reviewing our guidelines, fraudulent domains, and how to report suspicious activity here. Equal Opportunity Employer S&P Global is an equal opportunity employer and all qualified candidates will receive consideration for employment without regard to race/ethnicity, colour, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Only electronic job submissions will be considered for employment. If you need an accommodation during the application process due to a disability, please send an email to: and your request will be forwarded to the appropriate person. US Candidates Only: The EEO is the Law Poster describes discrimination protections under federal law. Pay Transparency Nondiscrimination Provision - English_formattedESQA508c.pdf RESECH103.2 - Middle Management Tier II (EEO Job Group) Job ID: 326237 Posted On: 2026-03-06 Location: Virtual, United Kingdom
Mar 16, 2026
Full time
About the Role: Grade Level (for internal use): 11 The Team: We are seeking an experienced Research Manager to lead a global team of research analysts responsible for identifying and validating supply chain relationships across the automotive ecosystem. This role will set the research direction, strengthen methodologies, and ensure consistent, high-quality outputs across for the Procurement Intelligence research team. You will join a talented and intellectually curious team of analysts working creatively to build objective insights that automotive procurement and risk stakeholders rely on. S&P Global has recently announced the intent to separate our Mobility Segment into a standalone public company. For more information, visit Responsibilities and Impact: Define and execute the research approach and methodologies used to identify and validate suppliers and supply chain relationships across the automotive ecosystem. Lead and develop a distributed team of research analysts across multiple time zones, setting priorities, managing workloads, and ensuring timely delivery against SLAs and project timelines. Establish research best practices (source triangulation, confidence scoring, documentation standards, audit trails, and escalation paths) to ensure consistency, repeatability, and defensibility of outputs. Guide analysts on data sources and collection strategies, including how to select, evaluate, and triangulate sources to validate supplier relationships and trading activity. Implement quality assurance (QA) and continuous improvement, including regular calibration sessions, spot checks, root cause reviews of defects, and coaching to reduce rework and improve accuracy over time. Collaborate cross functionally with operations, product/development, and commercial teams to align research outputs with platform requirements, client needs, and go to market messaging. Identify new research opportunities that expand coverage and support business growth. Support customer facing engagements as needed, including methodology discussions, research readouts, and responding to client inquiries regarding data provenance and validation logic. What We're Looking For: Basic Required Qualifications: Bachelor's degree in Business, Engineering, Supply Chain Management or a related field. 5+ years of experience in research management, competitive intelligence, supply chain research, or a related role-preferably tied to automotive or global supply chains. Proven experience managing distributed teams (multiple time zones), including performance management, coaching, and operational execution. Demonstrated ability to design research methods and translate ambiguous questions into structured workflows, measurable outputs, and clear analyst instructions. Excellent written and verbal communication skills, including the ability to present research findings and defend methodology to internal and external stakeholders. Additional Preferred Qualifications: Strong understanding of automotive supply chain structures and/or procurement processes (supplier tiers, sourcing, localization, capacity constraints, and operational risk concepts). Domain expertise in Electronics & Semiconductor Systems, Powertrain & Chassis Systems, or Interior & Cabin Systems. Experience partnering with technical teams to operationalise research outputs into scalable datasets. Background in supplier discovery/validation using a mix of primary/secondary research (e.g., interviews, industry publications, trade data, corporate filings, customs/shipping signals). Experience building or managing quality programs (QA frameworks, rubrics, confidence scoring, SOPs, training curricula). Track record of publishing research (reports, briefings, client deliverables) or presenting insights to procurement, supply chain, risk, or executive audiences. Familiarity with global trade and compliance concepts relevant to automotive sourcing (e.g., sanctions/export controls exposure, country of origin considerations, forced labor screening workflows). Master's degree (MBA or related) is a plus. Compensation/Benefits Information: (This section is only applicable to US candidates) S&P Global states that the anticipated base salary range for this position is $91,805 to $181,560. Final base salary for this role will be based on the individual's geographic location, as well as experience level, skill set, training, licenses and certifications. In addition to base compensation, this role is eligible for an annual incentive plan. This role is not eligible for additional compensation such as an annual incentive bonus or sales commission plan. This role is eligible to receive additional S&P Global benefits. For more information on the benefits we provide to our employees, please click Here About S&P Global Mobility At S&P Global Mobility, we provide invaluable insights derived from unmatched automotive data, enabling our customers to anticipate change and make decisions with conviction. Our expertise helps them to optimise their businesses, reach the right consumers, and shape the future of mobility. We open the door to automotive innovation, revealing the buying patterns of today and helping customers plan for the emerging technologies of tomorrow. What's In It For You? Our Mission: Advancing Essential Intelligence. Our People: We're more than 35,000 strong worldwide-so we're able to understand nuances while having a broad perspective. Our team is driven by curiosity and a shared belief that Essential Intelligence can help build a more prosperous future for us all. From finding new ways to measure sustainability to analysing energy transition across the supply chain to building workflow solutions that make it easy to tap into insight and apply it. We are changing the way people see things and empowering them to make an impact on the world we live in. We're committed to a more equitable future and to helping our customers find new, sustainable ways of doing business. Join us and help create the critical insights that truly make a difference. Our Values: Integrity, Discovery, Partnership Benefits: We take care of you, so you can take care of business. We care about our people. That's why we provide everything you- and your career-need to thrive at S&P Global. Our benefits include: Health & Wellness: Health care coverage designed for the mind and body. Flexible Downtime: Generous time off helps keep you energized for your time on. Continuous Learning: Access a wealth of resources to grow your career and learn valuable new skills. Invest in Your Future: Secure your financial future through competitive pay, retirement planning, a continuing education programme with a company matched student loan contribution, and financial wellness programmes. Family Friendly Perks: It's not just about you. S&P Global has perks for your partners and little ones, too, with some best in class benefits for families. Beyond the Basics: From retail discounts to referral incentive awards-small perks can make a big difference. For more information on benefits by country visit: Global Hiring and Opportunity at S&P Global: At S&P Global, we are committed to fostering a connected and engaged workplace where all individuals have access to opportunities based on their skills, experience, and contributions. Our hiring practices emphasise fairness, transparency, and merit, ensuring that we attract and retain top talent. By valuing different perspectives and promoting a culture of respect and collaboration, we drive innovation and power global markets. Recruitment Fraud Alert: If you receive an email from a domain or any other regionally based domains, it is a scam and should be reported to . S&P Global never requires any candidate to pay money for job applications, interviews, offer letters, "pre employment training" or for equipment/delivery of equipment. Stay informed and protect yourself from recruitment fraud by reviewing our guidelines, fraudulent domains, and how to report suspicious activity here. Equal Opportunity Employer S&P Global is an equal opportunity employer and all qualified candidates will receive consideration for employment without regard to race/ethnicity, colour, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Only electronic job submissions will be considered for employment. If you need an accommodation during the application process due to a disability, please send an email to: and your request will be forwarded to the appropriate person. US Candidates Only: The EEO is the Law Poster describes discrimination protections under federal law. Pay Transparency Nondiscrimination Provision - English_formattedESQA508c.pdf RESECH103.2 - Middle Management Tier II (EEO Job Group) Job ID: 326237 Posted On: 2026-03-06 Location: Virtual, United Kingdom
Fuse Energy is a forward-thinking renewable energy startup on a mission to deliver a terawatt of renewable energy - fast. We're combining first-principles thinking with cutting-edge technology to build a radically better energy system. We raised $170M from top-tier investors including Multicoin, Balderton, Lakestar, Accel, Creandum, Lowercarbon, Ribbit, Box Group and strategic angels like Nico Rosberg, the Co-Founder of Solana and GPs behind Meta, Revolut, Spotify, Uber and more. We're creating a fully integrated energy company: from developing solar, wind, and hydrogen projects to real-time power trading and distributed energy installations. By selling directly to customers, we cut out the middleman, lower costs and pass on savings to customers. But we're not stopping there. We're also building the Energy Network: a decentralised platform of smart devices that rewards users in Energy Dollars for electrifying their homes, shifting usage to off-peak hours, and helping balance the grid. This network strengthens grid stability - a critical foundation for scaling AI data centers and other energy-intensive industries. We're now looking for a hands-on and detail-driven Electrical Engineering Intern to join our team onsite in London. You'll be working closely with a team of engineers who have joined us from the likes of Tesla and SpaceX, helping to plan, design, and build utility scale renewable energy projects across the world. This role is ideal for someone who can deal well with ambiguity, reason from first-principles and demonstrate engineering rigour. You should be comfortable working with grid tied utility scale power generation facilities and have experience owning technical deliverables. Responsibilities Design HV and LV electrical systems for power, communications, and control Build test setups in the lab for validation of designs Power systems simulations in DlGSilent including transient analysis, inrush, and harmonics studies CCTV, SCADA and communications system design and optimization Assist with cost optimization and technoeconomic analyses Contribute to continuous improvement and development of standardized processes and procedures Requirements Degree in Electrical Engineering, Electronics, Mechatronics or a related field Strong hands-on experience - you've built, tested or debugged your own projects Knowledge of three phase power systems and associated components (power transformers, VT's CT's, switchgear, etc.) Safety-conscious and curious - you like understanding how things work (and how to make them better) Bonus Prior experience with renewable generation project design Understanding of UK grid regulations (G99, G100, BS standards, etc.) Interest in BESS or renewable energy technologies Competitive internship salary Fully expensed tech to match your needs Breakfast and dinner allowance for office based employees Opportunities for fast progression Competitive salary and an equity sign-on bonus Biannual bonus scheme Fully expensed tech to match your needs Paid annual leave Breakfast and dinner allowance for office based employees
Mar 16, 2026
Full time
Fuse Energy is a forward-thinking renewable energy startup on a mission to deliver a terawatt of renewable energy - fast. We're combining first-principles thinking with cutting-edge technology to build a radically better energy system. We raised $170M from top-tier investors including Multicoin, Balderton, Lakestar, Accel, Creandum, Lowercarbon, Ribbit, Box Group and strategic angels like Nico Rosberg, the Co-Founder of Solana and GPs behind Meta, Revolut, Spotify, Uber and more. We're creating a fully integrated energy company: from developing solar, wind, and hydrogen projects to real-time power trading and distributed energy installations. By selling directly to customers, we cut out the middleman, lower costs and pass on savings to customers. But we're not stopping there. We're also building the Energy Network: a decentralised platform of smart devices that rewards users in Energy Dollars for electrifying their homes, shifting usage to off-peak hours, and helping balance the grid. This network strengthens grid stability - a critical foundation for scaling AI data centers and other energy-intensive industries. We're now looking for a hands-on and detail-driven Electrical Engineering Intern to join our team onsite in London. You'll be working closely with a team of engineers who have joined us from the likes of Tesla and SpaceX, helping to plan, design, and build utility scale renewable energy projects across the world. This role is ideal for someone who can deal well with ambiguity, reason from first-principles and demonstrate engineering rigour. You should be comfortable working with grid tied utility scale power generation facilities and have experience owning technical deliverables. Responsibilities Design HV and LV electrical systems for power, communications, and control Build test setups in the lab for validation of designs Power systems simulations in DlGSilent including transient analysis, inrush, and harmonics studies CCTV, SCADA and communications system design and optimization Assist with cost optimization and technoeconomic analyses Contribute to continuous improvement and development of standardized processes and procedures Requirements Degree in Electrical Engineering, Electronics, Mechatronics or a related field Strong hands-on experience - you've built, tested or debugged your own projects Knowledge of three phase power systems and associated components (power transformers, VT's CT's, switchgear, etc.) Safety-conscious and curious - you like understanding how things work (and how to make them better) Bonus Prior experience with renewable generation project design Understanding of UK grid regulations (G99, G100, BS standards, etc.) Interest in BESS or renewable energy technologies Competitive internship salary Fully expensed tech to match your needs Breakfast and dinner allowance for office based employees Opportunities for fast progression Competitive salary and an equity sign-on bonus Biannual bonus scheme Fully expensed tech to match your needs Paid annual leave Breakfast and dinner allowance for office based employees
Job Title: Systems Engineer Location: Farnborough Salary: £DOE Key Skills: Systems Engineering, Aerospace, Defence, Design, Requirements, DOORS, Full Lifecycle, Electronics, Physics, Acoustics Are you ready to help shape the future of advanced technology? This is an opportunity to join a leading UK science and engineering organisation delivering cutting-edge solutions across defence and national security domains. Working alongside highly skilled engineers and scientists, you'll contribute to innovative programmes that protect lives and address complex real-world challenges. The Role As a Systems Engineer, you will contribute to the delivery of research, development, specialist technical advice, and independent test and evaluation services within an advanced airborne systems environment. You will work closely with customers and multidisciplinary teams to design, develop and validate high-performance technical solutions. Key Responsibilities as a Systems Engineer: Applying structured Systems and/or Software Engineering lifecycle approaches to complex technical challenges Using rapid prototyping and modelling techniques to inform system design decisions Supporting the development and test of advanced acoustic and sensor-based systems Contributing to high-fidelity simulation activities, including sensor and aircraft simulation Taking ownership of technical tasking while collaborating effectively within a dynamic, fast-paced team Supporting innovation-focused projects that deliver mission-critical capability Essential Experience as a Systems Engineer: Understanding of Systems and/or Software Engineering lifecycles Experience working within a Systems Engineering discipline Strong analytical and problem-solving capability Experience working effectively within multidisciplinary teams Essential Qualifications: Degree in Physics, Mathematics, Oceanography, Electronics, or a relevant Engineering discipline This role offers the opportunity to work on highly technical, real-world programmes within a collaborative and forward-thinking environment. PLEASE NOTE Security Clearance (SC) or eligibility to gain is required to be considered for this vacancy Services advertised by Gold Group are those of an Agency and/or an Employment Business.We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Mar 16, 2026
Full time
Job Title: Systems Engineer Location: Farnborough Salary: £DOE Key Skills: Systems Engineering, Aerospace, Defence, Design, Requirements, DOORS, Full Lifecycle, Electronics, Physics, Acoustics Are you ready to help shape the future of advanced technology? This is an opportunity to join a leading UK science and engineering organisation delivering cutting-edge solutions across defence and national security domains. Working alongside highly skilled engineers and scientists, you'll contribute to innovative programmes that protect lives and address complex real-world challenges. The Role As a Systems Engineer, you will contribute to the delivery of research, development, specialist technical advice, and independent test and evaluation services within an advanced airborne systems environment. You will work closely with customers and multidisciplinary teams to design, develop and validate high-performance technical solutions. Key Responsibilities as a Systems Engineer: Applying structured Systems and/or Software Engineering lifecycle approaches to complex technical challenges Using rapid prototyping and modelling techniques to inform system design decisions Supporting the development and test of advanced acoustic and sensor-based systems Contributing to high-fidelity simulation activities, including sensor and aircraft simulation Taking ownership of technical tasking while collaborating effectively within a dynamic, fast-paced team Supporting innovation-focused projects that deliver mission-critical capability Essential Experience as a Systems Engineer: Understanding of Systems and/or Software Engineering lifecycles Experience working within a Systems Engineering discipline Strong analytical and problem-solving capability Experience working effectively within multidisciplinary teams Essential Qualifications: Degree in Physics, Mathematics, Oceanography, Electronics, or a relevant Engineering discipline This role offers the opportunity to work on highly technical, real-world programmes within a collaborative and forward-thinking environment. PLEASE NOTE Security Clearance (SC) or eligibility to gain is required to be considered for this vacancy Services advertised by Gold Group are those of an Agency and/or an Employment Business.We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Hands-on role leading and developing a small team to provide engineering design, manufacturing support, and continuous improvement to a wide range of air movement products and innovative designs for future requirements. We are seeking someone with a strong project engineering skills with an electronics or mechanical background that has experience of leading a team. Office based :Monday to Friday -
Mar 16, 2026
Full time
Hands-on role leading and developing a small team to provide engineering design, manufacturing support, and continuous improvement to a wide range of air movement products and innovative designs for future requirements. We are seeking someone with a strong project engineering skills with an electronics or mechanical background that has experience of leading a team. Office based :Monday to Friday -
Job Title: Senior/Principal Hardware Engineer Location: Rochester - Onsite Salary: £55,000 to £65,000 per annum Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: This role focuses on delivering complex hardware design activities in line with development plans, budgets and schedules. It includes capturing requirements, producing preliminary and detailed designs, and performing the necessary analysis to ensure robust solutions. The position encourages innovation by identifying improvements to both design approaches and wider engineering practices, while working collaboratively with other disciplines to optimise system level outcomes and manage dependencies effectively. Alongside technical delivery, the role provides guidance and support across digital and analogue electronics development, helping ensure high quality engineering outputs. It also involves coaching junior engineers to build capability within the team and producing design artefacts that meet company and industry standards. Core duties: You will have a degree/HND in electronics engineering or an equivalent qualification You will have proven knowledge and experience of digital &/or analogue electronics technologies You will have experience of working through the engineering development lifecycle, from concept to product certification You will have the ability to demonstrate a good appreciation of cost and schedule constraints on designs, to meet programme needs and capable of providing robust engineering judgement in all phases of the engineering development lifecycle You will have a robust understanding of product design and work package control It is also desirable to have experience of Mentor Graphics Expedition Enterprise, Analogue simulations tools, such as Simetrix or Spice and System development tools, such as Enterprise Architect, Matlab, Simulink The Hardware Team: You will be working as part of a multidisciplinary team to formulate and optimise innovative hardware engineering solutions, for products such as Helmet Mounted & Head-Up Displays, Mission Computers, Flight Controls , Active Inceptors, and other associated safety-critical technology. This role will provide you with the opportunity to work with innovating cutting-edge projects as a member of a very experienced diverse team, with the view to progressing your career in this industry. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Mar 15, 2026
Full time
Job Title: Senior/Principal Hardware Engineer Location: Rochester - Onsite Salary: £55,000 to £65,000 per annum Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: This role focuses on delivering complex hardware design activities in line with development plans, budgets and schedules. It includes capturing requirements, producing preliminary and detailed designs, and performing the necessary analysis to ensure robust solutions. The position encourages innovation by identifying improvements to both design approaches and wider engineering practices, while working collaboratively with other disciplines to optimise system level outcomes and manage dependencies effectively. Alongside technical delivery, the role provides guidance and support across digital and analogue electronics development, helping ensure high quality engineering outputs. It also involves coaching junior engineers to build capability within the team and producing design artefacts that meet company and industry standards. Core duties: You will have a degree/HND in electronics engineering or an equivalent qualification You will have proven knowledge and experience of digital &/or analogue electronics technologies You will have experience of working through the engineering development lifecycle, from concept to product certification You will have the ability to demonstrate a good appreciation of cost and schedule constraints on designs, to meet programme needs and capable of providing robust engineering judgement in all phases of the engineering development lifecycle You will have a robust understanding of product design and work package control It is also desirable to have experience of Mentor Graphics Expedition Enterprise, Analogue simulations tools, such as Simetrix or Spice and System development tools, such as Enterprise Architect, Matlab, Simulink The Hardware Team: You will be working as part of a multidisciplinary team to formulate and optimise innovative hardware engineering solutions, for products such as Helmet Mounted & Head-Up Displays, Mission Computers, Flight Controls , Active Inceptors, and other associated safety-critical technology. This role will provide you with the opportunity to work with innovating cutting-edge projects as a member of a very experienced diverse team, with the view to progressing your career in this industry. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior/Principal Hardware Engineer Location: Rochester - Onsite Salary: £55,000 to £65,000 per annum Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: This role focuses on delivering complex hardware design activities in line with development plans, budgets and schedules. It includes capturing requirements, producing preliminary and detailed designs, and performing the necessary analysis to ensure robust solutions. The position encourages innovation by identifying improvements to both design approaches and wider engineering practices, while working collaboratively with other disciplines to optimise system level outcomes and manage dependencies effectively. Alongside technical delivery, the role provides guidance and support across digital and analogue electronics development, helping ensure high quality engineering outputs. It also involves coaching junior engineers to build capability within the team and producing design artefacts that meet company and industry standards. Core duties: You will have a degree/HND in electronics engineering or an equivalent qualification You will have proven knowledge and experience of digital &/or analogue electronics technologies You will have experience of working through the engineering development lifecycle, from concept to product certification You will have the ability to demonstrate a good appreciation of cost and schedule constraints on designs, to meet programme needs and capable of providing robust engineering judgement in all phases of the engineering development lifecycle You will have a robust understanding of product design and work package control It is also desirable to have experience of Mentor Graphics Expedition Enterprise, Analogue simulations tools, such as Simetrix or Spice and System development tools, such as Enterprise Architect, Matlab, Simulink The Hardware Team: You will be working as part of a multidisciplinary team to formulate and optimise innovative hardware engineering solutions, for products such as Helmet Mounted & Head-Up Displays, Mission Computers, Flight Controls , Active Inceptors, and other associated safety-critical technology. This role will provide you with the opportunity to work with innovating cutting-edge projects as a member of a very experienced diverse team, with the view to progressing your career in this industry. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Mar 15, 2026
Full time
Job Title: Senior/Principal Hardware Engineer Location: Rochester - Onsite Salary: £55,000 to £65,000 per annum Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: This role focuses on delivering complex hardware design activities in line with development plans, budgets and schedules. It includes capturing requirements, producing preliminary and detailed designs, and performing the necessary analysis to ensure robust solutions. The position encourages innovation by identifying improvements to both design approaches and wider engineering practices, while working collaboratively with other disciplines to optimise system level outcomes and manage dependencies effectively. Alongside technical delivery, the role provides guidance and support across digital and analogue electronics development, helping ensure high quality engineering outputs. It also involves coaching junior engineers to build capability within the team and producing design artefacts that meet company and industry standards. Core duties: You will have a degree/HND in electronics engineering or an equivalent qualification You will have proven knowledge and experience of digital &/or analogue electronics technologies You will have experience of working through the engineering development lifecycle, from concept to product certification You will have the ability to demonstrate a good appreciation of cost and schedule constraints on designs, to meet programme needs and capable of providing robust engineering judgement in all phases of the engineering development lifecycle You will have a robust understanding of product design and work package control It is also desirable to have experience of Mentor Graphics Expedition Enterprise, Analogue simulations tools, such as Simetrix or Spice and System development tools, such as Enterprise Architect, Matlab, Simulink The Hardware Team: You will be working as part of a multidisciplinary team to formulate and optimise innovative hardware engineering solutions, for products such as Helmet Mounted & Head-Up Displays, Mission Computers, Flight Controls , Active Inceptors, and other associated safety-critical technology. This role will provide you with the opportunity to work with innovating cutting-edge projects as a member of a very experienced diverse team, with the view to progressing your career in this industry. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior/Principal Hardware Engineer Location: Rochester - Onsite Salary: £55,000 to £65,000 per annum Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: This role focuses on delivering complex hardware design activities in line with development plans, budgets and schedules. It includes capturing requirements, producing preliminary and detailed designs, and performing the necessary analysis to ensure robust solutions. The position encourages innovation by identifying improvements to both design approaches and wider engineering practices, while working collaboratively with other disciplines to optimise system level outcomes and manage dependencies effectively. Alongside technical delivery, the role provides guidance and support across digital and analogue electronics development, helping ensure high quality engineering outputs. It also involves coaching junior engineers to build capability within the team and producing design artefacts that meet company and industry standards. Core duties: You will have a degree/HND in electronics engineering or an equivalent qualification You will have proven knowledge and experience of digital &/or analogue electronics technologies You will have experience of working through the engineering development lifecycle, from concept to product certification You will have the ability to demonstrate a good appreciation of cost and schedule constraints on designs, to meet programme needs and capable of providing robust engineering judgement in all phases of the engineering development lifecycle You will have a robust understanding of product design and work package control It is also desirable to have experience of Mentor Graphics Expedition Enterprise, Analogue simulations tools, such as Simetrix or Spice and System development tools, such as Enterprise Architect, Matlab, Simulink The Hardware Team: You will be working as part of a multidisciplinary team to formulate and optimise innovative hardware engineering solutions, for products such as Helmet Mounted & Head-Up Displays, Mission Computers, Flight Controls , Active Inceptors, and other associated safety-critical technology. This role will provide you with the opportunity to work with innovating cutting-edge projects as a member of a very experienced diverse team, with the view to progressing your career in this industry. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Mar 15, 2026
Full time
Job Title: Senior/Principal Hardware Engineer Location: Rochester - Onsite Salary: £55,000 to £65,000 per annum Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: This role focuses on delivering complex hardware design activities in line with development plans, budgets and schedules. It includes capturing requirements, producing preliminary and detailed designs, and performing the necessary analysis to ensure robust solutions. The position encourages innovation by identifying improvements to both design approaches and wider engineering practices, while working collaboratively with other disciplines to optimise system level outcomes and manage dependencies effectively. Alongside technical delivery, the role provides guidance and support across digital and analogue electronics development, helping ensure high quality engineering outputs. It also involves coaching junior engineers to build capability within the team and producing design artefacts that meet company and industry standards. Core duties: You will have a degree/HND in electronics engineering or an equivalent qualification You will have proven knowledge and experience of digital &/or analogue electronics technologies You will have experience of working through the engineering development lifecycle, from concept to product certification You will have the ability to demonstrate a good appreciation of cost and schedule constraints on designs, to meet programme needs and capable of providing robust engineering judgement in all phases of the engineering development lifecycle You will have a robust understanding of product design and work package control It is also desirable to have experience of Mentor Graphics Expedition Enterprise, Analogue simulations tools, such as Simetrix or Spice and System development tools, such as Enterprise Architect, Matlab, Simulink The Hardware Team: You will be working as part of a multidisciplinary team to formulate and optimise innovative hardware engineering solutions, for products such as Helmet Mounted & Head-Up Displays, Mission Computers, Flight Controls , Active Inceptors, and other associated safety-critical technology. This role will provide you with the opportunity to work with innovating cutting-edge projects as a member of a very experienced diverse team, with the view to progressing your career in this industry. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior/Principal Hardware Engineer Location: Rochester - Onsite Salary: £55,000 to £65,000 per annum Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: This role focuses on delivering complex hardware design activities in line with development plans, budgets and schedules. It includes capturing requirements, producing preliminary and detailed designs, and performing the necessary analysis to ensure robust solutions. The position encourages innovation by identifying improvements to both design approaches and wider engineering practices, while working collaboratively with other disciplines to optimise system level outcomes and manage dependencies effectively. Alongside technical delivery, the role provides guidance and support across digital and analogue electronics development, helping ensure high quality engineering outputs. It also involves coaching junior engineers to build capability within the team and producing design artefacts that meet company and industry standards. Core duties: You will have a degree/HND in electronics engineering or an equivalent qualification You will have proven knowledge and experience of digital &/or analogue electronics technologies You will have experience of working through the engineering development lifecycle, from concept to product certification You will have the ability to demonstrate a good appreciation of cost and schedule constraints on designs, to meet programme needs and capable of providing robust engineering judgement in all phases of the engineering development lifecycle You will have a robust understanding of product design and work package control It is also desirable to have experience of Mentor Graphics Expedition Enterprise, Analogue simulations tools, such as Simetrix or Spice and System development tools, such as Enterprise Architect, Matlab, Simulink The Hardware Team: You will be working as part of a multidisciplinary team to formulate and optimise innovative hardware engineering solutions, for products such as Helmet Mounted & Head-Up Displays, Mission Computers, Flight Controls , Active Inceptors, and other associated safety-critical technology. This role will provide you with the opportunity to work with innovating cutting-edge projects as a member of a very experienced diverse team, with the view to progressing your career in this industry. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Mar 15, 2026
Full time
Job Title: Senior/Principal Hardware Engineer Location: Rochester - Onsite Salary: £55,000 to £65,000 per annum Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: This role focuses on delivering complex hardware design activities in line with development plans, budgets and schedules. It includes capturing requirements, producing preliminary and detailed designs, and performing the necessary analysis to ensure robust solutions. The position encourages innovation by identifying improvements to both design approaches and wider engineering practices, while working collaboratively with other disciplines to optimise system level outcomes and manage dependencies effectively. Alongside technical delivery, the role provides guidance and support across digital and analogue electronics development, helping ensure high quality engineering outputs. It also involves coaching junior engineers to build capability within the team and producing design artefacts that meet company and industry standards. Core duties: You will have a degree/HND in electronics engineering or an equivalent qualification You will have proven knowledge and experience of digital &/or analogue electronics technologies You will have experience of working through the engineering development lifecycle, from concept to product certification You will have the ability to demonstrate a good appreciation of cost and schedule constraints on designs, to meet programme needs and capable of providing robust engineering judgement in all phases of the engineering development lifecycle You will have a robust understanding of product design and work package control It is also desirable to have experience of Mentor Graphics Expedition Enterprise, Analogue simulations tools, such as Simetrix or Spice and System development tools, such as Enterprise Architect, Matlab, Simulink The Hardware Team: You will be working as part of a multidisciplinary team to formulate and optimise innovative hardware engineering solutions, for products such as Helmet Mounted & Head-Up Displays, Mission Computers, Flight Controls , Active Inceptors, and other associated safety-critical technology. This role will provide you with the opportunity to work with innovating cutting-edge projects as a member of a very experienced diverse team, with the view to progressing your career in this industry. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior/Principal Hardware Engineer Location: Rochester - Onsite Salary: £55,000 to £65,000 per annum Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: This role focuses on delivering complex hardware design activities in line with development plans, budgets and schedules. It includes capturing requirements, producing preliminary and detailed designs, and performing the necessary analysis to ensure robust solutions. The position encourages innovation by identifying improvements to both design approaches and wider engineering practices, while working collaboratively with other disciplines to optimise system level outcomes and manage dependencies effectively. Alongside technical delivery, the role provides guidance and support across digital and analogue electronics development, helping ensure high quality engineering outputs. It also involves coaching junior engineers to build capability within the team and producing design artefacts that meet company and industry standards. Core duties: You will have a degree/HND in electronics engineering or an equivalent qualification You will have proven knowledge and experience of digital &/or analogue electronics technologies You will have experience of working through the engineering development lifecycle, from concept to product certification You will have the ability to demonstrate a good appreciation of cost and schedule constraints on designs, to meet programme needs and capable of providing robust engineering judgement in all phases of the engineering development lifecycle You will have a robust understanding of product design and work package control It is also desirable to have experience of Mentor Graphics Expedition Enterprise, Analogue simulations tools, such as Simetrix or Spice and System development tools, such as Enterprise Architect, Matlab, Simulink The Hardware Team: You will be working as part of a multidisciplinary team to formulate and optimise innovative hardware engineering solutions, for products such as Helmet Mounted & Head-Up Displays, Mission Computers, Flight Controls , Active Inceptors, and other associated safety-critical technology. This role will provide you with the opportunity to work with innovating cutting-edge projects as a member of a very experienced diverse team, with the view to progressing your career in this industry. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Mar 15, 2026
Full time
Job Title: Senior/Principal Hardware Engineer Location: Rochester - Onsite Salary: £55,000 to £65,000 per annum Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: This role focuses on delivering complex hardware design activities in line with development plans, budgets and schedules. It includes capturing requirements, producing preliminary and detailed designs, and performing the necessary analysis to ensure robust solutions. The position encourages innovation by identifying improvements to both design approaches and wider engineering practices, while working collaboratively with other disciplines to optimise system level outcomes and manage dependencies effectively. Alongside technical delivery, the role provides guidance and support across digital and analogue electronics development, helping ensure high quality engineering outputs. It also involves coaching junior engineers to build capability within the team and producing design artefacts that meet company and industry standards. Core duties: You will have a degree/HND in electronics engineering or an equivalent qualification You will have proven knowledge and experience of digital &/or analogue electronics technologies You will have experience of working through the engineering development lifecycle, from concept to product certification You will have the ability to demonstrate a good appreciation of cost and schedule constraints on designs, to meet programme needs and capable of providing robust engineering judgement in all phases of the engineering development lifecycle You will have a robust understanding of product design and work package control It is also desirable to have experience of Mentor Graphics Expedition Enterprise, Analogue simulations tools, such as Simetrix or Spice and System development tools, such as Enterprise Architect, Matlab, Simulink The Hardware Team: You will be working as part of a multidisciplinary team to formulate and optimise innovative hardware engineering solutions, for products such as Helmet Mounted & Head-Up Displays, Mission Computers, Flight Controls , Active Inceptors, and other associated safety-critical technology. This role will provide you with the opportunity to work with innovating cutting-edge projects as a member of a very experienced diverse team, with the view to progressing your career in this industry. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior/Principal Hardware Engineer Location: Rochester - Onsite Salary: £55,000 to £65,000 per annum Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: This role focuses on delivering complex hardware design activities in line with development plans, budgets and schedules. It includes capturing requirements, producing preliminary and detailed designs, and performing the necessary analysis to ensure robust solutions. The position encourages innovation by identifying improvements to both design approaches and wider engineering practices, while working collaboratively with other disciplines to optimise system level outcomes and manage dependencies effectively. Alongside technical delivery, the role provides guidance and support across digital and analogue electronics development, helping ensure high quality engineering outputs. It also involves coaching junior engineers to build capability within the team and producing design artefacts that meet company and industry standards. Core duties: You will have a degree/HND in electronics engineering or an equivalent qualification You will have proven knowledge and experience of digital &/or analogue electronics technologies You will have experience of working through the engineering development lifecycle, from concept to product certification You will have the ability to demonstrate a good appreciation of cost and schedule constraints on designs, to meet programme needs and capable of providing robust engineering judgement in all phases of the engineering development lifecycle You will have a robust understanding of product design and work package control It is also desirable to have experience of Mentor Graphics Expedition Enterprise, Analogue simulations tools, such as Simetrix or Spice and System development tools, such as Enterprise Architect, Matlab, Simulink The Hardware Team: You will be working as part of a multidisciplinary team to formulate and optimise innovative hardware engineering solutions, for products such as Helmet Mounted & Head-Up Displays, Mission Computers, Flight Controls , Active Inceptors, and other associated safety-critical technology. This role will provide you with the opportunity to work with innovating cutting-edge projects as a member of a very experienced diverse team, with the view to progressing your career in this industry. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Mar 15, 2026
Full time
Job Title: Senior/Principal Hardware Engineer Location: Rochester - Onsite Salary: £55,000 to £65,000 per annum Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: This role focuses on delivering complex hardware design activities in line with development plans, budgets and schedules. It includes capturing requirements, producing preliminary and detailed designs, and performing the necessary analysis to ensure robust solutions. The position encourages innovation by identifying improvements to both design approaches and wider engineering practices, while working collaboratively with other disciplines to optimise system level outcomes and manage dependencies effectively. Alongside technical delivery, the role provides guidance and support across digital and analogue electronics development, helping ensure high quality engineering outputs. It also involves coaching junior engineers to build capability within the team and producing design artefacts that meet company and industry standards. Core duties: You will have a degree/HND in electronics engineering or an equivalent qualification You will have proven knowledge and experience of digital &/or analogue electronics technologies You will have experience of working through the engineering development lifecycle, from concept to product certification You will have the ability to demonstrate a good appreciation of cost and schedule constraints on designs, to meet programme needs and capable of providing robust engineering judgement in all phases of the engineering development lifecycle You will have a robust understanding of product design and work package control It is also desirable to have experience of Mentor Graphics Expedition Enterprise, Analogue simulations tools, such as Simetrix or Spice and System development tools, such as Enterprise Architect, Matlab, Simulink The Hardware Team: You will be working as part of a multidisciplinary team to formulate and optimise innovative hardware engineering solutions, for products such as Helmet Mounted & Head-Up Displays, Mission Computers, Flight Controls , Active Inceptors, and other associated safety-critical technology. This role will provide you with the opportunity to work with innovating cutting-edge projects as a member of a very experienced diverse team, with the view to progressing your career in this industry. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Job Title: Senior/Principal Hardware Engineer Location: Rochester - Onsite Salary: £55,000 to £65,000 per annum Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: This role focuses on delivering complex hardware design activities in line with development plans, budgets and schedules. It includes capturing requirements, producing preliminary and detailed designs, and performing the necessary analysis to ensure robust solutions. The position encourages innovation by identifying improvements to both design approaches and wider engineering practices, while working collaboratively with other disciplines to optimise system level outcomes and manage dependencies effectively. Alongside technical delivery, the role provides guidance and support across digital and analogue electronics development, helping ensure high quality engineering outputs. It also involves coaching junior engineers to build capability within the team and producing design artefacts that meet company and industry standards. Core duties: You will have a degree/HND in electronics engineering or an equivalent qualification You will have proven knowledge and experience of digital &/or analogue electronics technologies You will have experience of working through the engineering development lifecycle, from concept to product certification You will have the ability to demonstrate a good appreciation of cost and schedule constraints on designs, to meet programme needs and capable of providing robust engineering judgement in all phases of the engineering development lifecycle You will have a robust understanding of product design and work package control It is also desirable to have experience of Mentor Graphics Expedition Enterprise, Analogue simulations tools, such as Simetrix or Spice and System development tools, such as Enterprise Architect, Matlab, Simulink The Hardware Team: You will be working as part of a multidisciplinary team to formulate and optimise innovative hardware engineering solutions, for products such as Helmet Mounted & Head-Up Displays, Mission Computers, Flight Controls , Active Inceptors, and other associated safety-critical technology. This role will provide you with the opportunity to work with innovating cutting-edge projects as a member of a very experienced diverse team, with the view to progressing your career in this industry. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Mar 15, 2026
Full time
Job Title: Senior/Principal Hardware Engineer Location: Rochester - Onsite Salary: £55,000 to £65,000 per annum Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: This role focuses on delivering complex hardware design activities in line with development plans, budgets and schedules. It includes capturing requirements, producing preliminary and detailed designs, and performing the necessary analysis to ensure robust solutions. The position encourages innovation by identifying improvements to both design approaches and wider engineering practices, while working collaboratively with other disciplines to optimise system level outcomes and manage dependencies effectively. Alongside technical delivery, the role provides guidance and support across digital and analogue electronics development, helping ensure high quality engineering outputs. It also involves coaching junior engineers to build capability within the team and producing design artefacts that meet company and industry standards. Core duties: You will have a degree/HND in electronics engineering or an equivalent qualification You will have proven knowledge and experience of digital &/or analogue electronics technologies You will have experience of working through the engineering development lifecycle, from concept to product certification You will have the ability to demonstrate a good appreciation of cost and schedule constraints on designs, to meet programme needs and capable of providing robust engineering judgement in all phases of the engineering development lifecycle You will have a robust understanding of product design and work package control It is also desirable to have experience of Mentor Graphics Expedition Enterprise, Analogue simulations tools, such as Simetrix or Spice and System development tools, such as Enterprise Architect, Matlab, Simulink The Hardware Team: You will be working as part of a multidisciplinary team to formulate and optimise innovative hardware engineering solutions, for products such as Helmet Mounted & Head-Up Displays, Mission Computers, Flight Controls , Active Inceptors, and other associated safety-critical technology. This role will provide you with the opportunity to work with innovating cutting-edge projects as a member of a very experienced diverse team, with the view to progressing your career in this industry. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
As our first dedicated Sourcing & Supply Chain Manager, your mission is to transform our advanced humanoid robot from a high-performance prototype into a scalable, profitable, and globally available product. You will be the commercial architect of our supply chain, ensuring that every sub-assembly-from custom actuators to bespoke electronics-arrives on time, on budget, and at world-class quality. Our social humanoid robots are the pinnacle of advanced engineering, with thousands of components. This role will be pivotal in our efforts to scale our production and allow our robots to reach the masses. We're incredibly proud of our product and our internal motto is 'Be Wow!', everything we do is Wow and this role will help us deliver that Wow to the world. Main Responsibilities Strategic Supplier Identification: Identify, vet, and onboard global suppliers Contractual Architecture: Lead the negotiation of Master Service Agreements (MSAs), Statements of Work (SOWs), and Quality Agreements Relationship Management: Act as the primary commercial point of contact for third-party manufacturers, monitoring ongoing performance and capacity Cost Management & BOM Optimization BOM Cost Reduction: Execute a strategy to drive down the total Bill of Materials cost through negotiation, volume tiering, and alternative sourcing Value Engineering Collaboration: Work with the NPI and Engineering functions to identify "Design for Cost" opportunities Total Landed Cost Analysis: Manage the full cost of parts, including duties, freight, packaging, and insurance, to ensure accurate margin forecasting Production Planning & Logistics Lead-Time De-risking: Monitor long-lead time components items and implement strategies to mitigate supply risks Inventory Control & "Call-Offs": Establish call-off agreements and Just-In-Time (JIT) delivery schedules to balance cash flow with production uptime Global Logistics Oversight: Coordinate international freight and manage customs compliance to ensure parts arrive on schedule Quality Assurance & Remediation Closed-Loop RMA Management: In partnership with Quality Engineering, manage the Return Merchandise Authorization (RMA) process for components that fail QC Financial Recovery: Negotiate credits, replacements, or rework costs with vendors for non-conforming components Qualifications, Knowledge, Key Skills and Experience Minimum 5 years in supply chain/sourcing, specifically having taken at least one complex hardware product from Prototype / Low Rate Initial Production to Mass Production Degree in Supply Chain Management, Industrial Engineering, Business Operations or a related field Experience with multi-level BOMs (1,000+ line items) involving PCBA, precision machining, sensors and wiring looms, and actuators. Proven experience managing Contract Manufacturers (CMs) and Tier 1 vendors across the globe Direct experience drafting and negotiating Master Service Agreements (MSAs), Statements of Work (SOWs), and specialized "Call-off" agreements for just-in-time delivery Understanding of shipping terms, customs duties and regulations for shipping globally Excellent price and lead time negotiation skills About Engineered Arts Engineered Arts is the leading manufacturer of full-size humanoid robots used for entertainment, education and communication. With 20 years of hardware and software development, our robots have been sold in over 30 countries worldwide with customers such as NASA, PwC, Meta and many more. Our Ameca robot is well known as 'the face of AI' and a social media viral success, taking advantage of the generative AI craze. Along with our ultra-realistic Mesmer range of animated figures our robots continue to surprise and excite visitors at museums, theme parks, visitor attractions and trade shows as well as aid leading universities with AI and robotics research. Our robots are poised to break into the future mega-expansion service robot segment, with applications such as front of house, receptions, check-in desks, information points and PoS. We are a team of dedicated engineers and creatives striving to develop the very best experiences for our customers. Our internal motto is ' Be Wow ', everything we do is fun, entertaining or surprising to encounter. We always push the boundaries of what is possible in humanoid robotics, researching and developing new systems and techniques to further their appeal. We explore and challenge the human perception of robots as well as the fear and discomfort and the excitement and joy life-like mechanical humanoids present.
Mar 15, 2026
Full time
As our first dedicated Sourcing & Supply Chain Manager, your mission is to transform our advanced humanoid robot from a high-performance prototype into a scalable, profitable, and globally available product. You will be the commercial architect of our supply chain, ensuring that every sub-assembly-from custom actuators to bespoke electronics-arrives on time, on budget, and at world-class quality. Our social humanoid robots are the pinnacle of advanced engineering, with thousands of components. This role will be pivotal in our efforts to scale our production and allow our robots to reach the masses. We're incredibly proud of our product and our internal motto is 'Be Wow!', everything we do is Wow and this role will help us deliver that Wow to the world. Main Responsibilities Strategic Supplier Identification: Identify, vet, and onboard global suppliers Contractual Architecture: Lead the negotiation of Master Service Agreements (MSAs), Statements of Work (SOWs), and Quality Agreements Relationship Management: Act as the primary commercial point of contact for third-party manufacturers, monitoring ongoing performance and capacity Cost Management & BOM Optimization BOM Cost Reduction: Execute a strategy to drive down the total Bill of Materials cost through negotiation, volume tiering, and alternative sourcing Value Engineering Collaboration: Work with the NPI and Engineering functions to identify "Design for Cost" opportunities Total Landed Cost Analysis: Manage the full cost of parts, including duties, freight, packaging, and insurance, to ensure accurate margin forecasting Production Planning & Logistics Lead-Time De-risking: Monitor long-lead time components items and implement strategies to mitigate supply risks Inventory Control & "Call-Offs": Establish call-off agreements and Just-In-Time (JIT) delivery schedules to balance cash flow with production uptime Global Logistics Oversight: Coordinate international freight and manage customs compliance to ensure parts arrive on schedule Quality Assurance & Remediation Closed-Loop RMA Management: In partnership with Quality Engineering, manage the Return Merchandise Authorization (RMA) process for components that fail QC Financial Recovery: Negotiate credits, replacements, or rework costs with vendors for non-conforming components Qualifications, Knowledge, Key Skills and Experience Minimum 5 years in supply chain/sourcing, specifically having taken at least one complex hardware product from Prototype / Low Rate Initial Production to Mass Production Degree in Supply Chain Management, Industrial Engineering, Business Operations or a related field Experience with multi-level BOMs (1,000+ line items) involving PCBA, precision machining, sensors and wiring looms, and actuators. Proven experience managing Contract Manufacturers (CMs) and Tier 1 vendors across the globe Direct experience drafting and negotiating Master Service Agreements (MSAs), Statements of Work (SOWs), and specialized "Call-off" agreements for just-in-time delivery Understanding of shipping terms, customs duties and regulations for shipping globally Excellent price and lead time negotiation skills About Engineered Arts Engineered Arts is the leading manufacturer of full-size humanoid robots used for entertainment, education and communication. With 20 years of hardware and software development, our robots have been sold in over 30 countries worldwide with customers such as NASA, PwC, Meta and many more. Our Ameca robot is well known as 'the face of AI' and a social media viral success, taking advantage of the generative AI craze. Along with our ultra-realistic Mesmer range of animated figures our robots continue to surprise and excite visitors at museums, theme parks, visitor attractions and trade shows as well as aid leading universities with AI and robotics research. Our robots are poised to break into the future mega-expansion service robot segment, with applications such as front of house, receptions, check-in desks, information points and PoS. We are a team of dedicated engineers and creatives striving to develop the very best experiences for our customers. Our internal motto is ' Be Wow ', everything we do is fun, entertaining or surprising to encounter. We always push the boundaries of what is possible in humanoid robotics, researching and developing new systems and techniques to further their appeal. We explore and challenge the human perception of robots as well as the fear and discomfort and the excitement and joy life-like mechanical humanoids present.
Rose & Young Recruitment Ltd
High Wycombe, Buckinghamshire
Field Service Engineer - (London & The Southeast) Covering: - (High Wycombe, Beaconsfield, Uxbridge, Slough) Basic Salary - £33,500 per annum rising to £35,000 per annum + Overtime & Commission Company vehicle, laptop, mobile phone, PPE Our client is a company committed to bringing products to market, offering innovative technology, effective modern design, and quality build. Supported by a highly motivated team of Service and Sales Engineers and office-based employees, they are dedicated to providing reliable and quality equipment within the Automotive Industry. Role Description This role of Automotive Service Engineer is a full-time remote position. Service, manage and developing client relationships and also identifying new business opportunities. Service of sold equipment form a large part of the role. Required Experience within the Automotive sector - ideally, ideally working within dealerships. Preference given to those with an Automotive Electronics background Previous experience within MOT Testing an advantage Strong communication and negotiation skills Ability to build and maintain relationships with key decision-makers Excellent presentation and interpersonal skills Highly organised - managing own diary Self-motivated Ability to work independently and remotely Able to lift 30/40kg equipment
Mar 15, 2026
Full time
Field Service Engineer - (London & The Southeast) Covering: - (High Wycombe, Beaconsfield, Uxbridge, Slough) Basic Salary - £33,500 per annum rising to £35,000 per annum + Overtime & Commission Company vehicle, laptop, mobile phone, PPE Our client is a company committed to bringing products to market, offering innovative technology, effective modern design, and quality build. Supported by a highly motivated team of Service and Sales Engineers and office-based employees, they are dedicated to providing reliable and quality equipment within the Automotive Industry. Role Description This role of Automotive Service Engineer is a full-time remote position. Service, manage and developing client relationships and also identifying new business opportunities. Service of sold equipment form a large part of the role. Required Experience within the Automotive sector - ideally, ideally working within dealerships. Preference given to those with an Automotive Electronics background Previous experience within MOT Testing an advantage Strong communication and negotiation skills Ability to build and maintain relationships with key decision-makers Excellent presentation and interpersonal skills Highly organised - managing own diary Self-motivated Ability to work independently and remotely Able to lift 30/40kg equipment
Job Title: Senior/Principal Hardware Engineer Location: Rochester - Onsite Salary: £55,000 to £65,000 per annum Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: This role focuses on delivering complex hardware design activities in line with development plans, budgets and schedules. It includes capturing requirements, producing preliminary and detailed designs, and performing the necessary analysis to ensure robust solutions. The position encourages innovation by identifying improvements to both design approaches and wider engineering practices, while working collaboratively with other disciplines to optimise system level outcomes and manage dependencies effectively. Alongside technical delivery, the role provides guidance and support across digital and analogue electronics development, helping ensure high quality engineering outputs. It also involves coaching junior engineers to build capability within the team and producing design artefacts that meet company and industry standards. Core duties: You will have a degree/HND in electronics engineering or an equivalent qualification You will have proven knowledge and experience of digital &/or analogue electronics technologies You will have experience of working through the engineering development lifecycle, from concept to product certification You will have the ability to demonstrate a good appreciation of cost and schedule constraints on designs, to meet programme needs and capable of providing robust engineering judgement in all phases of the engineering development lifecycle You will have a robust understanding of product design and work package control It is also desirable to have experience of Mentor Graphics Expedition Enterprise, Analogue simulations tools, such as Simetrix or Spice and System development tools, such as Enterprise Architect, Matlab, Simulink The Hardware Team: You will be working as part of a multidisciplinary team to formulate and optimise innovative hardware engineering solutions, for products such as Helmet Mounted & Head-Up Displays, Mission Computers, Flight Controls , Active Inceptors, and other associated safety-critical technology. This role will provide you with the opportunity to work with innovating cutting-edge projects as a member of a very experienced diverse team, with the view to progressing your career in this industry. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Mar 15, 2026
Full time
Job Title: Senior/Principal Hardware Engineer Location: Rochester - Onsite Salary: £55,000 to £65,000 per annum Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: This role focuses on delivering complex hardware design activities in line with development plans, budgets and schedules. It includes capturing requirements, producing preliminary and detailed designs, and performing the necessary analysis to ensure robust solutions. The position encourages innovation by identifying improvements to both design approaches and wider engineering practices, while working collaboratively with other disciplines to optimise system level outcomes and manage dependencies effectively. Alongside technical delivery, the role provides guidance and support across digital and analogue electronics development, helping ensure high quality engineering outputs. It also involves coaching junior engineers to build capability within the team and producing design artefacts that meet company and industry standards. Core duties: You will have a degree/HND in electronics engineering or an equivalent qualification You will have proven knowledge and experience of digital &/or analogue electronics technologies You will have experience of working through the engineering development lifecycle, from concept to product certification You will have the ability to demonstrate a good appreciation of cost and schedule constraints on designs, to meet programme needs and capable of providing robust engineering judgement in all phases of the engineering development lifecycle You will have a robust understanding of product design and work package control It is also desirable to have experience of Mentor Graphics Expedition Enterprise, Analogue simulations tools, such as Simetrix or Spice and System development tools, such as Enterprise Architect, Matlab, Simulink The Hardware Team: You will be working as part of a multidisciplinary team to formulate and optimise innovative hardware engineering solutions, for products such as Helmet Mounted & Head-Up Displays, Mission Computers, Flight Controls , Active Inceptors, and other associated safety-critical technology. This role will provide you with the opportunity to work with innovating cutting-edge projects as a member of a very experienced diverse team, with the view to progressing your career in this industry. Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 27th March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Technical Sales Manager Power Supply Modules Remote (UK) Travel to customer sites as required Salary: £50,000 £60,000 depending on experience Bonus: Performance-related bonus (13.5%) Benefits: Company car or allowance, Pension, Life Assurance, Income Protection, Private Medical Insurance ReeVR Talent are working with a leading consultancy in the electronics sector who are looking to appoint a Technical Sales Manager to drive the business development of Power Supply Modules. This is an exciting opportunity for a commercially driven technical sales professional with experience in power electronics to take ownership of developing new business, supporting customer designs, and managing key accounts across multiple high-growth markets. The appointed Technical Sales Manager will carry out the following duties; As Technical Sales Manager Power Supply Modules, you will be responsible for developing and growing the company s power supply business through both new demand creation and strategic account management. You will work closely with customers to provide technical solutions, supporting projects from initial design stage through to commercial delivery. Developing and executing a business strategy to create a sustainable pipeline of new opportunities and deliver against sales and margin targets. Building and maintaining long-term relationships with new and existing customers. Providing a solution-based technical sales approach, supporting customers during the design process. Supporting design opportunities for off-board power supplies across key sectors including industrial, medical, and military. Identifying opportunities to cross-sell complementary technologies such as magnetics and other power-related products. Managing opportunities from technical engagement through to commercial account management. The selected Technical Sales Manager will need to meet following key requirements for the position; To be successful in this role, you will bring a strong combination of technical understanding and commercial sales experience within the electronics sector. Engineering or Electronics degree / HNC or equivalent industry experience. Proven track record in technical sales or business development roles. Minimum 3 years experience selling power supply modules (preferred). Experience within the electronics industry, ideally working with OEMs or distributors. Strong understanding of customer applications, markets, and industry trends. Demonstrable ability to build strong internal and external relationships. Strong IT skills, including Excel, Word, and PowerPoint.
Mar 15, 2026
Full time
Technical Sales Manager Power Supply Modules Remote (UK) Travel to customer sites as required Salary: £50,000 £60,000 depending on experience Bonus: Performance-related bonus (13.5%) Benefits: Company car or allowance, Pension, Life Assurance, Income Protection, Private Medical Insurance ReeVR Talent are working with a leading consultancy in the electronics sector who are looking to appoint a Technical Sales Manager to drive the business development of Power Supply Modules. This is an exciting opportunity for a commercially driven technical sales professional with experience in power electronics to take ownership of developing new business, supporting customer designs, and managing key accounts across multiple high-growth markets. The appointed Technical Sales Manager will carry out the following duties; As Technical Sales Manager Power Supply Modules, you will be responsible for developing and growing the company s power supply business through both new demand creation and strategic account management. You will work closely with customers to provide technical solutions, supporting projects from initial design stage through to commercial delivery. Developing and executing a business strategy to create a sustainable pipeline of new opportunities and deliver against sales and margin targets. Building and maintaining long-term relationships with new and existing customers. Providing a solution-based technical sales approach, supporting customers during the design process. Supporting design opportunities for off-board power supplies across key sectors including industrial, medical, and military. Identifying opportunities to cross-sell complementary technologies such as magnetics and other power-related products. Managing opportunities from technical engagement through to commercial account management. The selected Technical Sales Manager will need to meet following key requirements for the position; To be successful in this role, you will bring a strong combination of technical understanding and commercial sales experience within the electronics sector. Engineering or Electronics degree / HNC or equivalent industry experience. Proven track record in technical sales or business development roles. Minimum 3 years experience selling power supply modules (preferred). Experience within the electronics industry, ideally working with OEMs or distributors. Strong understanding of customer applications, markets, and industry trends. Demonstrable ability to build strong internal and external relationships. Strong IT skills, including Excel, Word, and PowerPoint.
Electrical Engineer - Power Electronics (Renewable Energy) UK Based Competitive Salary + Benefits Full Time Permanent A confidential and rapidly growing engineering organisation operating in the renewable energy sector is seeking an Electrical Engineer with strong power electronics experience to support the development and deployment of next-generation energy systems. The company operates within the solar and energy conversion space , designing and integrating advanced electrical systems used in modern renewable power infrastructure. This is an opportunity to join a technically driven team where you will contribute directly to power electronics design, integration and system commissioning , helping bring innovative renewable technologies from concept through to deployment. Key Responsibilities Design and develop power electronic systems used in renewable energy applications Support integration of DC power systems, converters and inverters within solar energy platforms Contribute to system testing, validation and commissioning activities Support Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) of electrical systems Assist with validation activities including IQ / OQ protocols where required Troubleshoot electrical and power conversion systems during testing and deployment Work closely with multidisciplinary engineering teams including controls, mechanical and software engineers Produce clear technical documentation and commissioning records About You Degree in Electrical or Electronic Engineering or equivalent experience Experience working with power electronics, power conversion or energy systems Familiarity with inverters, converters, DC systems or solar power infrastructure Experience with testing, commissioning or validation of electrical systems Exposure to FAT, SAT, IQ or OQ processes would be advantageous If not directly experienced with these, background in system testing, validation or electrical commissioning would also be valuable Strong analytical and problem-solving mindset with a practical engineering approach This role offers an excellent opportunity to work on innovative renewable energy technologies , contributing to systems that are helping shape the future of clean power.
Mar 15, 2026
Full time
Electrical Engineer - Power Electronics (Renewable Energy) UK Based Competitive Salary + Benefits Full Time Permanent A confidential and rapidly growing engineering organisation operating in the renewable energy sector is seeking an Electrical Engineer with strong power electronics experience to support the development and deployment of next-generation energy systems. The company operates within the solar and energy conversion space , designing and integrating advanced electrical systems used in modern renewable power infrastructure. This is an opportunity to join a technically driven team where you will contribute directly to power electronics design, integration and system commissioning , helping bring innovative renewable technologies from concept through to deployment. Key Responsibilities Design and develop power electronic systems used in renewable energy applications Support integration of DC power systems, converters and inverters within solar energy platforms Contribute to system testing, validation and commissioning activities Support Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) of electrical systems Assist with validation activities including IQ / OQ protocols where required Troubleshoot electrical and power conversion systems during testing and deployment Work closely with multidisciplinary engineering teams including controls, mechanical and software engineers Produce clear technical documentation and commissioning records About You Degree in Electrical or Electronic Engineering or equivalent experience Experience working with power electronics, power conversion or energy systems Familiarity with inverters, converters, DC systems or solar power infrastructure Experience with testing, commissioning or validation of electrical systems Exposure to FAT, SAT, IQ or OQ processes would be advantageous If not directly experienced with these, background in system testing, validation or electrical commissioning would also be valuable Strong analytical and problem-solving mindset with a practical engineering approach This role offers an excellent opportunity to work on innovative renewable energy technologies , contributing to systems that are helping shape the future of clean power.
