Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
Mar 12, 2026
Full time
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
Job Title: Principal Systems Engineer Location: Chelmsford - Great Baddow, Hybrid, 3 days weekly onsite We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £75,900 commensurate with skills and experience. Part time & accruing hours available' Please let us know if you would like to discuss these options. Put yourself into a dynamic Principal Systems Engineering role at the forefront of real world demands in the defence industry. Alongside ensuring operational excellence for our existing products, there will be the opportunity to develop next generation radar products to counter emerging threats and contribute to our strategy for new technology. Your new day-to-day will be exciting and diverse by applying the principles of Systems Engineering across the entire engineering development lifecycle as you join in developing radar systems used by those who serve and protect us. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: You will develop innovative solutions to complex and emerging technical challenges within advanced radar systems, applying broad systems engineering expertise to guide design, resolve issues and ensure technical rigour. Your role includes performing detailed system analysis , managing design trade offs and leading the decomposition and governance of requirements using approved toolsets such as IBM DOORS Next. Acting as a central technical authority, you will drive system level decision making, lead analytical activities and mentor team members while collaborating with multidisciplinary specialists to shape integrated design solutions. You will also direct system integration, oversee test planning and execution, and define acceptance strategies that clearly demonstrate system performance across diverse operational scenarios to stakeholders. Core duties: You'll be experienced in systems design, integration & test You'll have an understanding of Systems and Product lifecycles from concept through to delivery You'll have an understanding of a range of Engineering disciplines (Software, Mechanical, Electrical) You'll have an understanding of Radar Systems is desirable, although not essential if other complementary skills demonstrate a capacity to understand new technologies quickly and effectively You'll hold good inter-personal skills with the ability to communicate to all levels within the organisation and externally You'll be experienced of presenting both technical and non-technical information in a formal setting You'll hold a degree (or equivalent) qualified in an engineering or science discipline The Radar Systems Engineering team: You will be working as a Principal Systems Engineer within our close-knit multi-function radar team of inter-disciplinary engineers, evolving our radar portfolio of existing and brand-new radar products to address emerging and future threats. Join us and help shape the future of Radar technology! Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 23rd March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Mar 12, 2026
Full time
Job Title: Principal Systems Engineer Location: Chelmsford - Great Baddow, Hybrid, 3 days weekly onsite We offer a range of hybrid and flexible working arrangements. Please speak to your recruiter about the options for this particular role Salary: Up to £75,900 commensurate with skills and experience. Part time & accruing hours available' Please let us know if you would like to discuss these options. Put yourself into a dynamic Principal Systems Engineering role at the forefront of real world demands in the defence industry. Alongside ensuring operational excellence for our existing products, there will be the opportunity to develop next generation radar products to counter emerging threats and contribute to our strategy for new technology. Your new day-to-day will be exciting and diverse by applying the principles of Systems Engineering across the entire engineering development lifecycle as you join in developing radar systems used by those who serve and protect us. Who we are: Join BAE Systems and you'll be part of something bigger. As a valued member of our global colleague network, you'll bring your unique skills and perspectives to help pioneer progress and protect what matters most. You'll be trusted to play your part in delivering the advanced, technology-led defence, aerospace and security solutions of tomorrow, shaping a safer future, for all of us. From the depths of the ocean, to the far reaches of space, there's no limit to where a career at BAE Systems could take you. What you'll be doing: You will develop innovative solutions to complex and emerging technical challenges within advanced radar systems, applying broad systems engineering expertise to guide design, resolve issues and ensure technical rigour. Your role includes performing detailed system analysis , managing design trade offs and leading the decomposition and governance of requirements using approved toolsets such as IBM DOORS Next. Acting as a central technical authority, you will drive system level decision making, lead analytical activities and mentor team members while collaborating with multidisciplinary specialists to shape integrated design solutions. You will also direct system integration, oversee test planning and execution, and define acceptance strategies that clearly demonstrate system performance across diverse operational scenarios to stakeholders. Core duties: You'll be experienced in systems design, integration & test You'll have an understanding of Systems and Product lifecycles from concept through to delivery You'll have an understanding of a range of Engineering disciplines (Software, Mechanical, Electrical) You'll have an understanding of Radar Systems is desirable, although not essential if other complementary skills demonstrate a capacity to understand new technologies quickly and effectively You'll hold good inter-personal skills with the ability to communicate to all levels within the organisation and externally You'll be experienced of presenting both technical and non-technical information in a formal setting You'll hold a degree (or equivalent) qualified in an engineering or science discipline The Radar Systems Engineering team: You will be working as a Principal Systems Engineer within our close-knit multi-function radar team of inter-disciplinary engineers, evolving our radar portfolio of existing and brand-new radar products to address emerging and future threats. Join us and help shape the future of Radar technology! Why BAE Systems? Here you'll build a career with purpose and limitless possibilities. With lifelong learning and meaningful work, this is a place where you can grow your career with confidence and be empowered to be your best. You'll be recognised for your contribution and enjoy rewards tailored to what's most important to you and your family, support for your financial and personal wellbeing, as well as a balanced lifestyle. In an environment embracing sustainable ways of working and with a strong sense of shared purpose, our supportive culture is a place you can feel you belong and proud of the difference you make. A place where everyone can thrive: We're committed to building an inclusive workplace where everyone feels valued and supported. We know that a diversity of backgrounds, perspectives and experiences strengthens our teams and is vital to the work we do. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role , to allow for meaningful security vetting checks. Closing Date: 23rd March 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Principal Design Engineer Nottingham Salary : £50,000 - £60,000 (DOE) 25 Days Holiday + Bank Holidays The company : Our client is a leading provider of mechanical engineering services in the area, supplying, designing an installing Bespoke Materials Handling Equipment and Special Purpose Machinery. Established in the area, they have built a strong reputation for delivering quality service to their clients nationwide in the FMCG, and Logistics industries. Their team designs and assembles a variety of products, including conveyor systems, robots, structural steel work, Crane Systems, and more. They pride themselves in a providing a high standard of craftsmanship and innovation, Working with multi-billion-pound business across the UK. As a business they are experiencing growth and a consistent large volume of incoming projects, with a full order book! and have recently promoted from within, as such they are looking to expand their design team to allow them to run additional projects simultaneously. They currently employ over 150 employees across the business, with around 10 engineers in the design team. The role: As the Principal Mechanical Engineer , you will lead high-level technical initiatives, working closely with the Head of Design, Research & Development to provide guidance, technical oversight, and mentorship to a growing team of engineers. You will play a critical role in shaping the future of the company s design capabilities and product innovations, driving projects from conception through to installation and beyond. Your responsibilities will include : Lead multidisciplinary teams in the development of advanced mechanical systems. Spearhead the design of cutting-edge electromechanical systems, ensuring alignment with industry standards and internal quality benchmarks. Use SolidWorks and 2D CAD to produce detailed 3D models, assembly drawings, and specifications. Conduct advanced engineering analysis, including FEA, structural, and fatigue analysis. Apply mathematical modelling, statics, dynamics, and vibration principles to inform design decisions. Support the Head of Design in technical strategy and deputise when required. Oversee component selection, including gear-motors, actuators, and integration of mechanical with electrical systems. Champion Design for Manufacture (DFM) and Design for Assembly (DFA) principles. Perform DFMEA, risk assessments, and ensure designs meet the Machinery Directive and relevant standards. Manage the development of CAD libraries and documentation standards. Lead R&D efforts including IP management, internal testing equipment design, and innovative product development. Drive cost optimisation and value engineering throughout the design lifecycle. What we re looking for in a candidate: BSc or MEng in Mechanical Engineering (essential), MSc in a relevant field (preferably Engineering Design or related). A minimum of 5 years' experience in mechanical design engineering, with a strong background in industrial automation or product development. Demonstrable leadership skills, with the ability to manage complex technical projects and mentor junior engineers. Strong proficiency in SolidWorks, 2D CAD, and analytical tools for engineering calculations and FEA. Practical experience with sheet metal, machining, plastic injection moulding, and manufacturing processes. A good grasp of programming or simulation tools such as MATLAB is advantageous. Strong interpersonal skills, capable of delivering consultative services to internal and external stakeholders. Chartered Engineer status (CEng) with IMechE or actively working towards it. The Benefits : Competitive salary: £50k £60k, dependent on experience Work alongside a collaborative, high-calibre design team Office-based role with flexible working hours (start between 6:30am 8:30am) 25 days holiday + bank holidays Company pension and development opportunities Involvement in high-profile, technically challenging projects Supportive leadership and a strong pipeline of innovation-focused work How to Apply : If you are a motivated and experienced Principal Mechanical Engineer looking to join a growing company, we want to hear from you! ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation
Mar 12, 2026
Full time
Principal Design Engineer Nottingham Salary : £50,000 - £60,000 (DOE) 25 Days Holiday + Bank Holidays The company : Our client is a leading provider of mechanical engineering services in the area, supplying, designing an installing Bespoke Materials Handling Equipment and Special Purpose Machinery. Established in the area, they have built a strong reputation for delivering quality service to their clients nationwide in the FMCG, and Logistics industries. Their team designs and assembles a variety of products, including conveyor systems, robots, structural steel work, Crane Systems, and more. They pride themselves in a providing a high standard of craftsmanship and innovation, Working with multi-billion-pound business across the UK. As a business they are experiencing growth and a consistent large volume of incoming projects, with a full order book! and have recently promoted from within, as such they are looking to expand their design team to allow them to run additional projects simultaneously. They currently employ over 150 employees across the business, with around 10 engineers in the design team. The role: As the Principal Mechanical Engineer , you will lead high-level technical initiatives, working closely with the Head of Design, Research & Development to provide guidance, technical oversight, and mentorship to a growing team of engineers. You will play a critical role in shaping the future of the company s design capabilities and product innovations, driving projects from conception through to installation and beyond. Your responsibilities will include : Lead multidisciplinary teams in the development of advanced mechanical systems. Spearhead the design of cutting-edge electromechanical systems, ensuring alignment with industry standards and internal quality benchmarks. Use SolidWorks and 2D CAD to produce detailed 3D models, assembly drawings, and specifications. Conduct advanced engineering analysis, including FEA, structural, and fatigue analysis. Apply mathematical modelling, statics, dynamics, and vibration principles to inform design decisions. Support the Head of Design in technical strategy and deputise when required. Oversee component selection, including gear-motors, actuators, and integration of mechanical with electrical systems. Champion Design for Manufacture (DFM) and Design for Assembly (DFA) principles. Perform DFMEA, risk assessments, and ensure designs meet the Machinery Directive and relevant standards. Manage the development of CAD libraries and documentation standards. Lead R&D efforts including IP management, internal testing equipment design, and innovative product development. Drive cost optimisation and value engineering throughout the design lifecycle. What we re looking for in a candidate: BSc or MEng in Mechanical Engineering (essential), MSc in a relevant field (preferably Engineering Design or related). A minimum of 5 years' experience in mechanical design engineering, with a strong background in industrial automation or product development. Demonstrable leadership skills, with the ability to manage complex technical projects and mentor junior engineers. Strong proficiency in SolidWorks, 2D CAD, and analytical tools for engineering calculations and FEA. Practical experience with sheet metal, machining, plastic injection moulding, and manufacturing processes. A good grasp of programming or simulation tools such as MATLAB is advantageous. Strong interpersonal skills, capable of delivering consultative services to internal and external stakeholders. Chartered Engineer status (CEng) with IMechE or actively working towards it. The Benefits : Competitive salary: £50k £60k, dependent on experience Work alongside a collaborative, high-calibre design team Office-based role with flexible working hours (start between 6:30am 8:30am) 25 days holiday + bank holidays Company pension and development opportunities Involvement in high-profile, technically challenging projects Supportive leadership and a strong pipeline of innovation-focused work How to Apply : If you are a motivated and experienced Principal Mechanical Engineer looking to join a growing company, we want to hear from you! ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation
Job Title: Principal Embedded Software Engineer Location: North West & Yorkshire Offices Salary: Up to £75k (depending on experience) We re partnering with an established technology engineering organisation seeking a Principal Embedded Software Engineer to lead software architecture, technical delivery, and development strategy across advanced embedded systems. This is a senior, hands-on role combining system architecture, embedded software development, and project ownership. A key aspect of this position is applying electrical power systems knowledge and protection function theory within embedded control environments. If you re a senior embedded engineer looking to influence architecture, lead delivery, and work on complex real-time systems, we want to hear from you! About the Role Define and own embedded software architecture and technical direction Lead delivery of complex embedded projects to time and quality targets Develop and maintain robust C/C++ embedded codebases Translate system requirements into structured deliverables Guide design decisions and review implementation approaches Oversee testing strategy, documentation, and release quality Identify technical risks and implement mitigation strategies Drive Agile processes and continuous improvement practices Collaborate cross-functionally with engineering and project stakeholders About you Degree (or equivalent experience) in Computer Science, Electronics, or similar Advanced C/C++ embedded development experience Strong background in embedded systems design Experience working with real-time operating systems (e.g., FreeRTOS) Solid understanding of multithreading and concurrency Networking knowledge including TCP/IP, UDP and secure communications Experience with embedded Linux or RTOS environments Knowledge of electrical power systems and protection function theory Experience delivering commercial embedded products end-to-end Peripheral interfacing experience (SPI, I2C, memory interfaces) Debugging complex real-time or multithreaded systems Desirable Experience Linux-based embedded platforms or containerised environments Python or scripting languages CI/CD pipelines and DevOps tooling Industrial communication protocols or automation systems Cybersecurity concepts within embedded environments Cloud or enterprise platform integration Wireless communications (WiFi, Bluetooth, Zigbee) Please note, we cannot offer sponsorship for this role. If interested, please send over an updated CV.
Feb 28, 2026
Full time
Job Title: Principal Embedded Software Engineer Location: North West & Yorkshire Offices Salary: Up to £75k (depending on experience) We re partnering with an established technology engineering organisation seeking a Principal Embedded Software Engineer to lead software architecture, technical delivery, and development strategy across advanced embedded systems. This is a senior, hands-on role combining system architecture, embedded software development, and project ownership. A key aspect of this position is applying electrical power systems knowledge and protection function theory within embedded control environments. If you re a senior embedded engineer looking to influence architecture, lead delivery, and work on complex real-time systems, we want to hear from you! About the Role Define and own embedded software architecture and technical direction Lead delivery of complex embedded projects to time and quality targets Develop and maintain robust C/C++ embedded codebases Translate system requirements into structured deliverables Guide design decisions and review implementation approaches Oversee testing strategy, documentation, and release quality Identify technical risks and implement mitigation strategies Drive Agile processes and continuous improvement practices Collaborate cross-functionally with engineering and project stakeholders About you Degree (or equivalent experience) in Computer Science, Electronics, or similar Advanced C/C++ embedded development experience Strong background in embedded systems design Experience working with real-time operating systems (e.g., FreeRTOS) Solid understanding of multithreading and concurrency Networking knowledge including TCP/IP, UDP and secure communications Experience with embedded Linux or RTOS environments Knowledge of electrical power systems and protection function theory Experience delivering commercial embedded products end-to-end Peripheral interfacing experience (SPI, I2C, memory interfaces) Debugging complex real-time or multithreaded systems Desirable Experience Linux-based embedded platforms or containerised environments Python or scripting languages CI/CD pipelines and DevOps tooling Industrial communication protocols or automation systems Cybersecurity concepts within embedded environments Cloud or enterprise platform integration Wireless communications (WiFi, Bluetooth, Zigbee) Please note, we cannot offer sponsorship for this role. If interested, please send over an updated CV.
Job Title: Principal Embedded Software Engineer Location: Bradford Salary: Up to £75k (depending on experience) We re partnering with an established technology engineering organisation seeking a Principal Embedded Software Engineer to lead software architecture, technical delivery, and development strategy across advanced embedded systems. This is a senior, hands-on role combining system architecture, embedded software development, and project ownership. You will guide technical direction and ensure high-quality delivery across the full software lifecycle. A key aspect of this position is applying electrical power systems knowledge and protection function theory within embedded control and communication environments. If you re a senior embedded engineer looking to influence architecture, lead delivery, and work on complex real-time systems, we want to hear from you! About the Role Define and own embedded software architecture and technical direction Lead delivery of complex embedded projects to time and quality targets Develop and maintain robust C/C++ embedded codebases Translate system requirements into structured deliverables and work packages Guide design decisions and review implementation approaches Oversee testing strategy, documentation, and release quality Identify technical risks and implement mitigation strategies Drive Agile processes and continuous improvement practices Collaborate cross-functionally with engineering and project stakeholders About you Degree (or equivalent experience) in Computer Science, Electronics, or similar Advanced C/C++ embedded development experience Strong background in embedded systems design Experience working with real-time operating systems (e.g., FreeRTOS) Solid understanding of multithreading and concurrency Networking knowledge including TCP/IP, UDP and secure communications Experience with embedded Linux or RTOS environments Knowledge of electrical power systems and protection function theory Experience delivering commercial embedded products end-to-end Peripheral interfacing experience (SPI, I2C, memory interfaces) Debugging complex real-time or multithreaded systems Desirable Experience Linux-based embedded platforms or containerised environments Python or scripting languages CI/CD pipelines and DevOps tooling Industrial communication protocols or automation systems Cybersecurity concepts within embedded environments Cloud or enterprise platform integration Wireless communications (WiFi, Bluetooth, Zigbee) Please note, we cannot offer sponsorship for this role. If interested, please send over an updated CV.
Feb 28, 2026
Full time
Job Title: Principal Embedded Software Engineer Location: Bradford Salary: Up to £75k (depending on experience) We re partnering with an established technology engineering organisation seeking a Principal Embedded Software Engineer to lead software architecture, technical delivery, and development strategy across advanced embedded systems. This is a senior, hands-on role combining system architecture, embedded software development, and project ownership. You will guide technical direction and ensure high-quality delivery across the full software lifecycle. A key aspect of this position is applying electrical power systems knowledge and protection function theory within embedded control and communication environments. If you re a senior embedded engineer looking to influence architecture, lead delivery, and work on complex real-time systems, we want to hear from you! About the Role Define and own embedded software architecture and technical direction Lead delivery of complex embedded projects to time and quality targets Develop and maintain robust C/C++ embedded codebases Translate system requirements into structured deliverables and work packages Guide design decisions and review implementation approaches Oversee testing strategy, documentation, and release quality Identify technical risks and implement mitigation strategies Drive Agile processes and continuous improvement practices Collaborate cross-functionally with engineering and project stakeholders About you Degree (or equivalent experience) in Computer Science, Electronics, or similar Advanced C/C++ embedded development experience Strong background in embedded systems design Experience working with real-time operating systems (e.g., FreeRTOS) Solid understanding of multithreading and concurrency Networking knowledge including TCP/IP, UDP and secure communications Experience with embedded Linux or RTOS environments Knowledge of electrical power systems and protection function theory Experience delivering commercial embedded products end-to-end Peripheral interfacing experience (SPI, I2C, memory interfaces) Debugging complex real-time or multithreaded systems Desirable Experience Linux-based embedded platforms or containerised environments Python or scripting languages CI/CD pipelines and DevOps tooling Industrial communication protocols or automation systems Cybersecurity concepts within embedded environments Cloud or enterprise platform integration Wireless communications (WiFi, Bluetooth, Zigbee) Please note, we cannot offer sponsorship for this role. If interested, please send over an updated CV.
JOB DESCRIPTION Job title: Senior Software Engineer - GCS Location: Fareham, Hampshire Responsible to: Principal Engineer - GCS Liaison with: All staff, sub-contractors, customers, and suppliers About the role: To work on the development of user-facing Ground Control Station (GCS) software designed to enable operators to remotely control and monitor autonomous vehicles beyond visual line-of-sight. This role focuses on developing robust, intuitive interfaces using C++, Qt, QML, and JavaScript, while also incorporating modern UX principles and thorough testing methodologies. You will be responsible for designing, implementing, and optimising user interfaces that must enable operators to navigate complex tactical situations without overwhelming them. You will be expected to run UI experiments with our in-house team of operations experts and with key customers to determine critical software requirements. You should be comfortable handling complex workloads across R&D, prototyping, and mission-critical production deployments. Primary responsibilities include, but are not limited to: Work on the design and development of user-facing GCS software for autonomous vehicle monitoring and control. Build and maintain user interface software using C++, Qt, QML, and JavaScript. Engage with operators to gather requirements, validate usability, and refine user experience. Develop prototypes and storyboards to capture user requirements and iterate on design concepts. Ensure software robustness through rigorous testing, validation, and performance optimization. Collaborate with cross-functional teams, including autonomy and hardware engineers, to integrate software solutions. Document and maintain codebases with a focus on readability, scalability, and maintainability. Provide technical leadership and mentorship to junior developers . PERSON SPECIFICATION Essential qualifications, skills and experience: Extensive experience in C++ and Qt, ideally including QML and JavaScript. Strong understanding of user interface design principles, particularly for mission-critical systems. Experience defining software requirements, developing architectures, and producing robust implementations. Proficiency in software testing methodologies, including unit testing, integration testing, and user acceptance testing. UI testing techniques, including automated testing, usability testing, and end-to-end testing, is highly desirable. Strong communication skills and the ability to interact effectively with end-users to gather requirements. Proven ability to work independently and manage complex workloads effectively . Desirable qualifications, skills and experience: as above but not essential for the role Experience with storyboarding and UX design software (e.g., Figma , Sketch, Adobe XD ). Prior experience working in remote control systems, robotics, or defence-related industries. Knowledge of the maritime environment , nautical charts , or survey software . Familiarity with HTML/CSS and WebSockets. Familiarity with cloud-based systems, containerization Key behaviours that align with our commitment to excellence, collaboration and efficiency within the workplace: To be punctual and manage workload effectively to meet deadlines and priorities Clearly convey ideas and information while actively listening to others Work well with colleagues to achieve common goals and support team members as needed Identify issues and develop practical solutions in a timely manner Maintain a high standard of conduct, respecting confidentiality and addressing challenges respectfully Ensure work is accurate, thorough and free from errors through careful review Take ownership of tasks, following through on commitments Maintain professionalism in client interactions General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day-to-day activities and procedures within the specified role To maintain personal ability in, and appropriate use of, all relevant IT (Information and Technology) and other systems required to adequately perform the role To act ethically, with integrity and in the best interest of the business at all times To maintain a professional and supportive relationship with team members and other departments to deliver business objectives or deadlines To carry out any other duties as detailed by a member of the senior management team or authorised representative To keep good time management to minimise any wasted time and maximise productivity and effectiveness Health & Safety responsibilities: To ensure that the working area is a clean and a safe environment in compliance with the best practice and health and safety policies To ensure any equipment used is safe, within electrical test date and all guards and interlocks are working and in place To act safely and responsibly in line with company processes and Health and Safety procedures to ensure your safety and the safety of others To report any potential Health and safety hazards or violations to your line manager or directly to the QHSE Manager To ensure any PPE or work wear required or provided for the job is worn and checked regularly for wear and then reported when replacements required
Feb 27, 2026
Full time
JOB DESCRIPTION Job title: Senior Software Engineer - GCS Location: Fareham, Hampshire Responsible to: Principal Engineer - GCS Liaison with: All staff, sub-contractors, customers, and suppliers About the role: To work on the development of user-facing Ground Control Station (GCS) software designed to enable operators to remotely control and monitor autonomous vehicles beyond visual line-of-sight. This role focuses on developing robust, intuitive interfaces using C++, Qt, QML, and JavaScript, while also incorporating modern UX principles and thorough testing methodologies. You will be responsible for designing, implementing, and optimising user interfaces that must enable operators to navigate complex tactical situations without overwhelming them. You will be expected to run UI experiments with our in-house team of operations experts and with key customers to determine critical software requirements. You should be comfortable handling complex workloads across R&D, prototyping, and mission-critical production deployments. Primary responsibilities include, but are not limited to: Work on the design and development of user-facing GCS software for autonomous vehicle monitoring and control. Build and maintain user interface software using C++, Qt, QML, and JavaScript. Engage with operators to gather requirements, validate usability, and refine user experience. Develop prototypes and storyboards to capture user requirements and iterate on design concepts. Ensure software robustness through rigorous testing, validation, and performance optimization. Collaborate with cross-functional teams, including autonomy and hardware engineers, to integrate software solutions. Document and maintain codebases with a focus on readability, scalability, and maintainability. Provide technical leadership and mentorship to junior developers . PERSON SPECIFICATION Essential qualifications, skills and experience: Extensive experience in C++ and Qt, ideally including QML and JavaScript. Strong understanding of user interface design principles, particularly for mission-critical systems. Experience defining software requirements, developing architectures, and producing robust implementations. Proficiency in software testing methodologies, including unit testing, integration testing, and user acceptance testing. UI testing techniques, including automated testing, usability testing, and end-to-end testing, is highly desirable. Strong communication skills and the ability to interact effectively with end-users to gather requirements. Proven ability to work independently and manage complex workloads effectively . Desirable qualifications, skills and experience: as above but not essential for the role Experience with storyboarding and UX design software (e.g., Figma , Sketch, Adobe XD ). Prior experience working in remote control systems, robotics, or defence-related industries. Knowledge of the maritime environment , nautical charts , or survey software . Familiarity with HTML/CSS and WebSockets. Familiarity with cloud-based systems, containerization Key behaviours that align with our commitment to excellence, collaboration and efficiency within the workplace: To be punctual and manage workload effectively to meet deadlines and priorities Clearly convey ideas and information while actively listening to others Work well with colleagues to achieve common goals and support team members as needed Identify issues and develop practical solutions in a timely manner Maintain a high standard of conduct, respecting confidentiality and addressing challenges respectfully Ensure work is accurate, thorough and free from errors through careful review Take ownership of tasks, following through on commitments Maintain professionalism in client interactions General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day-to-day activities and procedures within the specified role To maintain personal ability in, and appropriate use of, all relevant IT (Information and Technology) and other systems required to adequately perform the role To act ethically, with integrity and in the best interest of the business at all times To maintain a professional and supportive relationship with team members and other departments to deliver business objectives or deadlines To carry out any other duties as detailed by a member of the senior management team or authorised representative To keep good time management to minimise any wasted time and maximise productivity and effectiveness Health & Safety responsibilities: To ensure that the working area is a clean and a safe environment in compliance with the best practice and health and safety policies To ensure any equipment used is safe, within electrical test date and all guards and interlocks are working and in place To act safely and responsibly in line with company processes and Health and Safety procedures to ensure your safety and the safety of others To report any potential Health and safety hazards or violations to your line manager or directly to the QHSE Manager To ensure any PPE or work wear required or provided for the job is worn and checked regularly for wear and then reported when replacements required
JOB DESCRIPTION Job title: Senior Software Engineer - GCS Location: Fareham, Hampshire Responsible to: Principal Engineer - GCS Liaison with: All Kraken staff, sub-contractors, customers, and suppliers About the role: To work on the development of user-facing Ground Control Station (GCS) software designed to enable operators to remotely control and monitor autonomous vehicles beyond visual line-of-sight. This role focuses on developing robust, intuitive interfaces using C++, Qt, QML, and JavaScript, while also incorporating modern UX principles and thorough testing methodologies. You will be responsible for designing, implementing, and optimising user interfaces that must enable operators to navigate complex tactical situations without overwhelming them. You will be expected to run UI experiments with our in-house team of operations experts and with key customers to determine critical software requirements. You should be comfortable handling complex workloads across R&D, prototyping, and mission-critical production deployments. Primary responsibilities include, but are not limited to: Work on the design and development of user-facing GCS software for autonomous vehicle monitoring and control. Build and maintain user interface software using C++, Qt, QML, and JavaScript. Engage with operators to gather requirements, validate usability, and refine user experience. Develop prototypes and storyboards to capture user requirements and iterate on design concepts. Ensure software robustness through rigorous testing, validation, and performance optimization. Collaborate with cross-functional teams, including autonomy and hardware engineers, to integrate software solutions. Document and maintain codebases with a focus on readability, scalability, and maintainability. Provide technical leadership and mentorship to junior developers . PERSON SPECIFICATION Essential qualifications, skills and experience: Extensive experience in C++ and Qt, ideally including QML and JavaScript. Strong understanding of user interface design principles, particularly for mission-critical systems. Experience defining software requirements, developing architectures, and producing robust implementations. Proficiency in software testing methodologies, including unit testing, integration testing, and user acceptance testing. UI testing techniques, including automated testing, usability testing, and end-to-end testing, is highly desirable. Strong communication skills and the ability to interact effectively with end-users to gather requirements. Proven ability to work independently and manage complex workloads effectively . Desirable qualifications, skills and experience: as above but not essential for the role Experience with storyboarding and UX design software (e.g., Figma , Sketch, Adobe XD ). Prior experience working in remote control systems, robotics, or defence-related industries. Knowledge of the maritime environment , nautical charts , or survey software . Familiarity with HTML/CSS and WebSockets. Familiarity with cloud-based systems, containerization Key behaviours that align with our commitment to excellence, collaboration and efficiency within the workplace: To be punctual and manage workload effectively to meet deadlines and priorities Clearly convey ideas and information while actively listening to others Work well with colleagues to achieve common goals and support team members as needed Identify issues and develop practical solutions in a timely manner Maintain a high standard of conduct, respecting confidentiality and addressing challenges respectfully Ensure work is accurate, thorough and free from errors through careful review Take ownership of tasks, following through on commitments Maintain professionalism in client interactions General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day-to-day activities and procedures within the specified role To maintain personal ability in, and appropriate use of, all relevant IT (Information and Technology) and other systems required to adequately perform the role To act ethically, with integrity and in the best interest of the business at all times To maintain a professional and supportive relationship with team members and other departments to deliver business objectives or deadlines To carry out any other duties as detailed by a member of the senior management team or authorised representative To keep good time management to minimise any wasted time and maximise productivity and effectiveness Health & Safety responsibilities: To ensure that the working area is a clean and a safe environment in compliance with the best practice and health and safety policies To ensure any equipment used is safe, within electrical test date and all guards and interlocks are working and in place To act safely and responsibly in line with company processes and Health and Safety procedures to ensure your safety and the safety of others To report any potential Health and safety hazards or violations to your line manager or directly to the QHSE Manager To ensure any PPE or work wear required or provided for the job is worn and checked regularly for wear and then reported when replacements required
Feb 26, 2026
Full time
JOB DESCRIPTION Job title: Senior Software Engineer - GCS Location: Fareham, Hampshire Responsible to: Principal Engineer - GCS Liaison with: All Kraken staff, sub-contractors, customers, and suppliers About the role: To work on the development of user-facing Ground Control Station (GCS) software designed to enable operators to remotely control and monitor autonomous vehicles beyond visual line-of-sight. This role focuses on developing robust, intuitive interfaces using C++, Qt, QML, and JavaScript, while also incorporating modern UX principles and thorough testing methodologies. You will be responsible for designing, implementing, and optimising user interfaces that must enable operators to navigate complex tactical situations without overwhelming them. You will be expected to run UI experiments with our in-house team of operations experts and with key customers to determine critical software requirements. You should be comfortable handling complex workloads across R&D, prototyping, and mission-critical production deployments. Primary responsibilities include, but are not limited to: Work on the design and development of user-facing GCS software for autonomous vehicle monitoring and control. Build and maintain user interface software using C++, Qt, QML, and JavaScript. Engage with operators to gather requirements, validate usability, and refine user experience. Develop prototypes and storyboards to capture user requirements and iterate on design concepts. Ensure software robustness through rigorous testing, validation, and performance optimization. Collaborate with cross-functional teams, including autonomy and hardware engineers, to integrate software solutions. Document and maintain codebases with a focus on readability, scalability, and maintainability. Provide technical leadership and mentorship to junior developers . PERSON SPECIFICATION Essential qualifications, skills and experience: Extensive experience in C++ and Qt, ideally including QML and JavaScript. Strong understanding of user interface design principles, particularly for mission-critical systems. Experience defining software requirements, developing architectures, and producing robust implementations. Proficiency in software testing methodologies, including unit testing, integration testing, and user acceptance testing. UI testing techniques, including automated testing, usability testing, and end-to-end testing, is highly desirable. Strong communication skills and the ability to interact effectively with end-users to gather requirements. Proven ability to work independently and manage complex workloads effectively . Desirable qualifications, skills and experience: as above but not essential for the role Experience with storyboarding and UX design software (e.g., Figma , Sketch, Adobe XD ). Prior experience working in remote control systems, robotics, or defence-related industries. Knowledge of the maritime environment , nautical charts , or survey software . Familiarity with HTML/CSS and WebSockets. Familiarity with cloud-based systems, containerization Key behaviours that align with our commitment to excellence, collaboration and efficiency within the workplace: To be punctual and manage workload effectively to meet deadlines and priorities Clearly convey ideas and information while actively listening to others Work well with colleagues to achieve common goals and support team members as needed Identify issues and develop practical solutions in a timely manner Maintain a high standard of conduct, respecting confidentiality and addressing challenges respectfully Ensure work is accurate, thorough and free from errors through careful review Take ownership of tasks, following through on commitments Maintain professionalism in client interactions General accountabilities and responsibilities: To use personal judgement and initiative to develop effective and constructive solutions to challenges and obstacles in day-to-day activities and procedures within the specified role To maintain personal ability in, and appropriate use of, all relevant IT (Information and Technology) and other systems required to adequately perform the role To act ethically, with integrity and in the best interest of the business at all times To maintain a professional and supportive relationship with team members and other departments to deliver business objectives or deadlines To carry out any other duties as detailed by a member of the senior management team or authorised representative To keep good time management to minimise any wasted time and maximise productivity and effectiveness Health & Safety responsibilities: To ensure that the working area is a clean and a safe environment in compliance with the best practice and health and safety policies To ensure any equipment used is safe, within electrical test date and all guards and interlocks are working and in place To act safely and responsibly in line with company processes and Health and Safety procedures to ensure your safety and the safety of others To report any potential Health and safety hazards or violations to your line manager or directly to the QHSE Manager To ensure any PPE or work wear required or provided for the job is worn and checked regularly for wear and then reported when replacements required
