Manufacturing Test Engineer £40,000 - 50,000 GBP Hybrid WORKING Location: Stevenage, Central London, Greater London - United Kingdom Type: Permanent Manufacturing Test Engineer Location: Stevenage (Hybrid, 4-5 days on site due to workload) Salary: £40,000 - £50,000 depending on experience, plus bonus and benefits Please note due to the nature of work this role will require you to be holding British Citizenship A leading defence organisation is seeking talented Manufacturing Test Engineers to shape production testing strategies for next-generation weapon systems. These roles provide a unique chance to influence test system development during early production phases, supporting critical programmes that deliver advanced electronics for national security in a dynamic, collaborative manufacturing environment. The role You'll join the Manufacturing Test Engineering team, focusing on test system introduction, diagnostics, and production readiness for electrical, electronic, and RF weapon systems and sub-assemblies. Working with design, operations, and project teams, you'll ensure robust testing from concept through to operational release, troubleshooting failures and driving technical excellence across development and production. What you will be doing Providing test engineering support from design concept through Production Readiness Review. Supporting test facility introduction with configuration control, specifications, and operator instructions. Testing electrical/electronic weapon systems, sub-assemblies, and circuit cards, diagnosing failures to component level. Identifying remedial actions and collaborating with stakeholders to resolve technical challenges. Guiding and mentoring junior engineers while delivering against project timelines. What we are looking for HNC/HND or degree in a relevant subject, plus experience in digital, analogue, and RF electronics manufacture/test. Strong understanding of electrical/electronic/RF measurement principles, test equipment, and systems-level functional testing. Experience across the product development lifecycle in electronics manufacturing, ideally defence-related. Proficiency with manual and automated test equipment, plus ability to prioritise multiple tasks. Excellent verbal/written communication for reports, instructions, and team collaboration. Experience in a fast-paced manufacturing environment would be advantageous. What's on offer Salary £40,000 - £50,000 depending on experience. Annual company bonus up to £2,500. Pension with up to 14% total contributions. Flexi leave up to 15 extra days, overtime opportunities, and flexible working. Enhanced parental leave and fantastic site facilities like subsidised meals and free parking. Due to the nature of the work, candidates must be British Citizens. All successful applicants will be required to undergo security clearance checks including BPSS. Want to hear more? Message me anytime, Ciaran Cleland. Reference: AMC/CCL/SMTE Postcode: SG1 1HS JBRP1_UKTJ
Dec 15, 2025
Full time
Manufacturing Test Engineer £40,000 - 50,000 GBP Hybrid WORKING Location: Stevenage, Central London, Greater London - United Kingdom Type: Permanent Manufacturing Test Engineer Location: Stevenage (Hybrid, 4-5 days on site due to workload) Salary: £40,000 - £50,000 depending on experience, plus bonus and benefits Please note due to the nature of work this role will require you to be holding British Citizenship A leading defence organisation is seeking talented Manufacturing Test Engineers to shape production testing strategies for next-generation weapon systems. These roles provide a unique chance to influence test system development during early production phases, supporting critical programmes that deliver advanced electronics for national security in a dynamic, collaborative manufacturing environment. The role You'll join the Manufacturing Test Engineering team, focusing on test system introduction, diagnostics, and production readiness for electrical, electronic, and RF weapon systems and sub-assemblies. Working with design, operations, and project teams, you'll ensure robust testing from concept through to operational release, troubleshooting failures and driving technical excellence across development and production. What you will be doing Providing test engineering support from design concept through Production Readiness Review. Supporting test facility introduction with configuration control, specifications, and operator instructions. Testing electrical/electronic weapon systems, sub-assemblies, and circuit cards, diagnosing failures to component level. Identifying remedial actions and collaborating with stakeholders to resolve technical challenges. Guiding and mentoring junior engineers while delivering against project timelines. What we are looking for HNC/HND or degree in a relevant subject, plus experience in digital, analogue, and RF electronics manufacture/test. Strong understanding of electrical/electronic/RF measurement principles, test equipment, and systems-level functional testing. Experience across the product development lifecycle in electronics manufacturing, ideally defence-related. Proficiency with manual and automated test equipment, plus ability to prioritise multiple tasks. Excellent verbal/written communication for reports, instructions, and team collaboration. Experience in a fast-paced manufacturing environment would be advantageous. What's on offer Salary £40,000 - £50,000 depending on experience. Annual company bonus up to £2,500. Pension with up to 14% total contributions. Flexi leave up to 15 extra days, overtime opportunities, and flexible working. Enhanced parental leave and fantastic site facilities like subsidised meals and free parking. Due to the nature of the work, candidates must be British Citizens. All successful applicants will be required to undergo security clearance checks including BPSS. Want to hear more? Message me anytime, Ciaran Cleland. Reference: AMC/CCL/SMTE Postcode: SG1 1HS JBRP1_UKTJ
Assistant Vice President, Deferred Compensation Specialist page is loaded Assistant Vice President, Deferred Compensation Specialistlocations: Londontime type: Full timeposted on: Posted Todaytime left to apply: End Date: December 29, 2025 (15 days left to apply)job requisition id: -WDDiscover your opportunity with Mitsubishi UFJ Financial Group (MUFG), one of the world's leading financial groups. Across the globe, we're 150,000 colleagues, striving to make a difference for every client, organization, and community we serve. We stand for our values, building long-term relationships, serving society, and fostering shared and sustainable growth for a better world.With a vision to be the world's most trusted financial group, it's part of our culture to put people first, listen to new and diverse ideas and collaborate toward greater innovation, speed and agility. This means investing in talent, technologies, and tools that empower you to own your career.Join MUFG, where being inspired is expected and making a meaningful impact is rewarded.To provide support to the Director, Head of Global Regulatory Reward & Governance on the deferred reward management. The role involves analysing and presenting compensation data to ensure the local reward framework is competitive, equitable and aligned with business goals, as well as compliant with regulations. NO OF DIRECT REPORTS 0 KEY RESPONSIBILITIES Lead the end-to-end implementation of a new deferred compensation management system for the EMEA region, acting as the primary subject-matter expert throughout the project lifecycle. Work closely with HR Technology, vendors, Risk, Compliance, Finance, Payroll, PRB teams and other relevant stakeholders to define system requirements, test functionality, validate data, and ensure operational readiness Develop and execute system testing plans (UAT, regression, parallel runs) and coordinate issue resolution Ensure successful migration of historical and current deferred compensation data, embedding data quality checks, validation frameworks and controls. Support alignment and integration with global system and management strategy Map current-state processes end-to-end and identify opportunities to streamline, automate, and enhance operational efficiency. Design and document future-state processes that reduce manual touchpoints, mitigate operational risks, and support scalability for global adoption. Create standard operation procedures (SOPs), workflows, and control maps to support consistent execution across the EMEA region and globally where possible. Support transition of day-to-day deferred compensation management to MUFG Global Services (MGS) Establish key process metrics to monitor effectiveness and support continuous improvement. Strengthen internal control frameworks to ensure deferred compensation processes meet audit, regulatory, and internal policy requirements. Partner with Legal, Compliance, and any other relevant stakeholders, to ensure all EMEA regulatory obligations (e.g., remuneration rules, deferral structures, malus/clawback requirements, etc) are fully operationalised. Prepare documentation and evidence for audits, internal reviews, and risk assessments, leading remediation activities where required. Serve as key liaison across HR, Technology, Risk, Finance, and any other relevant stakeholders, ensuring clear communication and alignment on timelines, deliverables, and dependencies. Provide training, guidance, and support to HR Operations, PRB partners, employees, and other stakeholders, on new system functionality and enhanced processes. Support the Head of Global Regulatory Reward & Governance with development and implementation of global deferred compensation strategies and contribute to global projects aiming to harmonise deferred compensation processes, governance frameworks, and technologies across all regions. Identify opportunities for EMEA processes to serve as a blueprint for future global implementation. Support transition activities required to achieve fully consistent global operating model. Provide support in the delivery of the annual compensation review, including liaising with the broader Performance, Reward & Benefits (PRB) team, business heads and the HR Business Partners to deliver a successful year end process. Support the preparation of regulatory disclosures, including the Remuneration Policy Statement (RPS) and Pillar 3 on remuneration items. WORK EXPERIENCE Essential: Knowledge of Reward & Deferred Compensation within financial services Experience of working with and delivering for multiple stakeholders Experience of analysing data and presenting trends and themes to inform HR and business decisions. Experience of working in a multi-national organisation Experience of Reward & Deferred Compensation Operations, including process engineeringPreferred: Operational knowledge of HR management systems preferably Workday SKILLS AND EXPERIENCE Functional / Technical Competencies: Strong analytical skills and good attention to detail Excellent written, verbal and interpersonal communication skills, able to adapt style and tone to suit the audience. Strong skills in Microsoft Office (Excel, Word, Powerpoint) - essential Strong organisational skills with experience in managing multiple deliverables, deadlines and stakeholders Demonstrates an ability to prioritise a challenging workload and act with urgency, delivering to multiple, sometimes tight, deadlines Ability to take the initiative and be proactive Team player and enjoy collaborating within the team Education / Qualifications: Professional Human Resources/business certification or equivalent industry experience desired PERSONAL REQUIREMENTS Strong interest in Performance and Reward with a passion for making a difference Excellent written & oral communication skills, with a keen eye for detail Excellent interpersonal skills, with the ability to build & manage relationships, as well as influence A collaborative approach to working with a range of stakeholders across teams, divisions & locations Results driven, with a strong sense of accountability A proactive, self-motivated, organized approach, able to navigate and simplify complexityThis advert will close 29th December 2025We are open to considering flexible working requests in line with organisational requirements.MUFG is committed to embracing diversity and building an inclusive culture where all employees are valued, respected and their opinions count. We support the principles of equality, diversity and inclusion in recruitment and employment, and oppose all forms of discrimination on the grounds of age, sex, gender, sexual orientation, disability, pregnancy and maternity, race, gender reassignment, religion or belief and marriage or civil partnership.We make our recruitment decisions in a non-discriminatory manner in accordance with our commitment to identifying the right skills for the right role and our obligations under the law.
Dec 15, 2025
Full time
Assistant Vice President, Deferred Compensation Specialist page is loaded Assistant Vice President, Deferred Compensation Specialistlocations: Londontime type: Full timeposted on: Posted Todaytime left to apply: End Date: December 29, 2025 (15 days left to apply)job requisition id: -WDDiscover your opportunity with Mitsubishi UFJ Financial Group (MUFG), one of the world's leading financial groups. Across the globe, we're 150,000 colleagues, striving to make a difference for every client, organization, and community we serve. We stand for our values, building long-term relationships, serving society, and fostering shared and sustainable growth for a better world.With a vision to be the world's most trusted financial group, it's part of our culture to put people first, listen to new and diverse ideas and collaborate toward greater innovation, speed and agility. This means investing in talent, technologies, and tools that empower you to own your career.Join MUFG, where being inspired is expected and making a meaningful impact is rewarded.To provide support to the Director, Head of Global Regulatory Reward & Governance on the deferred reward management. The role involves analysing and presenting compensation data to ensure the local reward framework is competitive, equitable and aligned with business goals, as well as compliant with regulations. NO OF DIRECT REPORTS 0 KEY RESPONSIBILITIES Lead the end-to-end implementation of a new deferred compensation management system for the EMEA region, acting as the primary subject-matter expert throughout the project lifecycle. Work closely with HR Technology, vendors, Risk, Compliance, Finance, Payroll, PRB teams and other relevant stakeholders to define system requirements, test functionality, validate data, and ensure operational readiness Develop and execute system testing plans (UAT, regression, parallel runs) and coordinate issue resolution Ensure successful migration of historical and current deferred compensation data, embedding data quality checks, validation frameworks and controls. Support alignment and integration with global system and management strategy Map current-state processes end-to-end and identify opportunities to streamline, automate, and enhance operational efficiency. Design and document future-state processes that reduce manual touchpoints, mitigate operational risks, and support scalability for global adoption. Create standard operation procedures (SOPs), workflows, and control maps to support consistent execution across the EMEA region and globally where possible. Support transition of day-to-day deferred compensation management to MUFG Global Services (MGS) Establish key process metrics to monitor effectiveness and support continuous improvement. Strengthen internal control frameworks to ensure deferred compensation processes meet audit, regulatory, and internal policy requirements. Partner with Legal, Compliance, and any other relevant stakeholders, to ensure all EMEA regulatory obligations (e.g., remuneration rules, deferral structures, malus/clawback requirements, etc) are fully operationalised. Prepare documentation and evidence for audits, internal reviews, and risk assessments, leading remediation activities where required. Serve as key liaison across HR, Technology, Risk, Finance, and any other relevant stakeholders, ensuring clear communication and alignment on timelines, deliverables, and dependencies. Provide training, guidance, and support to HR Operations, PRB partners, employees, and other stakeholders, on new system functionality and enhanced processes. Support the Head of Global Regulatory Reward & Governance with development and implementation of global deferred compensation strategies and contribute to global projects aiming to harmonise deferred compensation processes, governance frameworks, and technologies across all regions. Identify opportunities for EMEA processes to serve as a blueprint for future global implementation. Support transition activities required to achieve fully consistent global operating model. Provide support in the delivery of the annual compensation review, including liaising with the broader Performance, Reward & Benefits (PRB) team, business heads and the HR Business Partners to deliver a successful year end process. Support the preparation of regulatory disclosures, including the Remuneration Policy Statement (RPS) and Pillar 3 on remuneration items. WORK EXPERIENCE Essential: Knowledge of Reward & Deferred Compensation within financial services Experience of working with and delivering for multiple stakeholders Experience of analysing data and presenting trends and themes to inform HR and business decisions. Experience of working in a multi-national organisation Experience of Reward & Deferred Compensation Operations, including process engineeringPreferred: Operational knowledge of HR management systems preferably Workday SKILLS AND EXPERIENCE Functional / Technical Competencies: Strong analytical skills and good attention to detail Excellent written, verbal and interpersonal communication skills, able to adapt style and tone to suit the audience. Strong skills in Microsoft Office (Excel, Word, Powerpoint) - essential Strong organisational skills with experience in managing multiple deliverables, deadlines and stakeholders Demonstrates an ability to prioritise a challenging workload and act with urgency, delivering to multiple, sometimes tight, deadlines Ability to take the initiative and be proactive Team player and enjoy collaborating within the team Education / Qualifications: Professional Human Resources/business certification or equivalent industry experience desired PERSONAL REQUIREMENTS Strong interest in Performance and Reward with a passion for making a difference Excellent written & oral communication skills, with a keen eye for detail Excellent interpersonal skills, with the ability to build & manage relationships, as well as influence A collaborative approach to working with a range of stakeholders across teams, divisions & locations Results driven, with a strong sense of accountability A proactive, self-motivated, organized approach, able to navigate and simplify complexityThis advert will close 29th December 2025We are open to considering flexible working requests in line with organisational requirements.MUFG is committed to embracing diversity and building an inclusive culture where all employees are valued, respected and their opinions count. We support the principles of equality, diversity and inclusion in recruitment and employment, and oppose all forms of discrimination on the grounds of age, sex, gender, sexual orientation, disability, pregnancy and maternity, race, gender reassignment, religion or belief and marriage or civil partnership.We make our recruitment decisions in a non-discriminatory manner in accordance with our commitment to identifying the right skills for the right role and our obligations under the law.
Senior Embedded Systems Engineer (Drive-by-Wire / PLC) - First Key Hire Circa £80k+, London based Want to work for an advanced start up with acquired IP requiring an experienced Senior Embedded Systems Engineer to become the first dedicated DBW & control integration hire? This is a high-ownership role where you'll lead the embedded control capability across the autonomous vehicle and industrial auto click apply for full job details
Dec 15, 2025
Full time
Senior Embedded Systems Engineer (Drive-by-Wire / PLC) - First Key Hire Circa £80k+, London based Want to work for an advanced start up with acquired IP requiring an experienced Senior Embedded Systems Engineer to become the first dedicated DBW & control integration hire? This is a high-ownership role where you'll lead the embedded control capability across the autonomous vehicle and industrial auto click apply for full job details
Infrastructure - Thames Water Assistant Quantity Surveyor The Opportunity We are growing our team delivering AMP8 for Thames Water, to meet the greatly enlarged programme of works between 2025 and 2030. Tilbury Douglas have already been allocated circa £250m of projects in the delightful rural setting of the Cotswolds, Oxfordshire and Thames Valley regions. This is a great opportunity to join the team delivering on Treatment Works within this area. Our projects are a mix of civil, mechanical, electrical and IC scopes and range between £2.5m to £25m in size, several of which will be on sites that we are completing AMP7 projects. This is an exciting time to join the Tilbury Douglas Infrastructure Division as we are delivering enlarged AMP8 programmes across the UK for several water companies. We are recruiting across all project disciplines including management, supervision, design, engineering, commercial, project controls and project services. What you will be doing as Assistant Quantity Surveyor Assist with the timely preparation and submission of main contract payment applications and support cash collection, as well as assess subcontractor payment applications and issue Pay Less Notices where applicable Assist in preparing draft subcontracts as delegated by the supervisor, including issuing enquiries, reviewing quotations and using company databases like Constructionline to pre screen subcontractors for quality and safety compliance. Support senior staff in monitoring subcontractor performance to ensure compliance with contractual obligations and project standards Assist in pricing variations by thoroughly assessing cost impacts, including those resulting from design changes, to ensure all elements are accurately captured Participate in recording delays and preparing extension of time requests, using programme knowledge and critical path methodology to assess impacts To participate in the settlement of main contract final accounts To assist senior staff in the compilation of data to monitor individual contract performance on a monthly and quarterly basis Support the development of Trainee QS's through supervision of allocated tasks, mentoring, and providing guidance to help build their technical and commercial skills Work collaboratively with the site team to oversee plant allocation and utilisation, maintaining accurate plant records and supporting cost recovery. Assist in the preparation, procurement, and pricing of tender submissions, particularly for Early Contractor Involvement (ECI) projects. Assist in cost forecasting and the preparation of Cost Value Reconciliations (CVRs) to support accurate financial reporting and informed commercial decision making Interpret and assess expenditure and cost reports produced from internal cost systems (e.g., ledgers) to support financial analysis Help manage stakeholder expectations through clear communication on costs, variations, and project progress Assist in submitting Early Warning Notices (EWNs) and preparing early warning assessments to help identify and manage potential project risks What we will need from you Ability to read a construction programme and relevance of the critical path Understanding of H&S issues at work Awareness of dispute resolution procedures Adept at understanding construction drawings and able to measure and take off accurately Understanding of the inter relationship between bills, specifications, and drawings Understanding of construction contracts in relation to projects and of the relevance of subcontract terms and conditions Ability to assess and value minor changes/variations in compliance with contract terms Basic knowledge of different industry contracts Basic understanding of risk in construction process Proficient in use of Microsoft packages e.g. Excel, Word & PowerPoint Ability to communicate effectively with a range of people. Experience of working on a live project, undertaking measurement and valuation functions Experience of managing low risk sub contractors Experience of processing subcontract payments Ability to organise and plan your workload. Working towards professional accreditation e.g. RICS, CIOB, ICES (desirable) Hold a relevant CSCS card Location Mandatory to work 3/ 4 days on site (including Clearwater, Reading) What we can offer you Competitive salary (to be discussed on application) Car allowance (to be discussed on application) 26 days annual leave (with the opportunity to buy or sell up to 3 days holiday) Private medical insurance for yourself (with the option to buy family cover) Life Assurance Defined contribution pension scheme matched up to 8% 2 days volunteering opportunities Flexible and Agile working (dependent on your role) Employee Assistance Programme Professional membership fees Flexible Benefits scheme which includes the opportunity to purchase benefits such as: Critical illness insurance (with option to purchase for your partner) Dental Insurance Travel insurance Cycle to work scheme Retail vouchers/payroll giving/activity pass for top leisure attractions Who we are Tilbury Douglas is a leading UK building, infrastructure, engineering and fit out company. We deliver vital projects across a range of sectors including health, education, highways, justice, defence, aviation, water and environment. It is our people who make Tilbury Douglas a success. We believe our inclusive culture encourages new ways of thinking, enabling us to innovate whilst remaining resilient. We value and celebrate all individual differences and look forward to receiving your application. We are currently working towards Investors in Diversity accredited status. Please note we do not have a sponsorship license. Please note that this role is subject to Baseline Personnel Security Standard (BPSS) clearance which includes identity, employment history, and criminal record checks. We look forward to receiving your application!
Dec 15, 2025
Full time
Infrastructure - Thames Water Assistant Quantity Surveyor The Opportunity We are growing our team delivering AMP8 for Thames Water, to meet the greatly enlarged programme of works between 2025 and 2030. Tilbury Douglas have already been allocated circa £250m of projects in the delightful rural setting of the Cotswolds, Oxfordshire and Thames Valley regions. This is a great opportunity to join the team delivering on Treatment Works within this area. Our projects are a mix of civil, mechanical, electrical and IC scopes and range between £2.5m to £25m in size, several of which will be on sites that we are completing AMP7 projects. This is an exciting time to join the Tilbury Douglas Infrastructure Division as we are delivering enlarged AMP8 programmes across the UK for several water companies. We are recruiting across all project disciplines including management, supervision, design, engineering, commercial, project controls and project services. What you will be doing as Assistant Quantity Surveyor Assist with the timely preparation and submission of main contract payment applications and support cash collection, as well as assess subcontractor payment applications and issue Pay Less Notices where applicable Assist in preparing draft subcontracts as delegated by the supervisor, including issuing enquiries, reviewing quotations and using company databases like Constructionline to pre screen subcontractors for quality and safety compliance. Support senior staff in monitoring subcontractor performance to ensure compliance with contractual obligations and project standards Assist in pricing variations by thoroughly assessing cost impacts, including those resulting from design changes, to ensure all elements are accurately captured Participate in recording delays and preparing extension of time requests, using programme knowledge and critical path methodology to assess impacts To participate in the settlement of main contract final accounts To assist senior staff in the compilation of data to monitor individual contract performance on a monthly and quarterly basis Support the development of Trainee QS's through supervision of allocated tasks, mentoring, and providing guidance to help build their technical and commercial skills Work collaboratively with the site team to oversee plant allocation and utilisation, maintaining accurate plant records and supporting cost recovery. Assist in the preparation, procurement, and pricing of tender submissions, particularly for Early Contractor Involvement (ECI) projects. Assist in cost forecasting and the preparation of Cost Value Reconciliations (CVRs) to support accurate financial reporting and informed commercial decision making Interpret and assess expenditure and cost reports produced from internal cost systems (e.g., ledgers) to support financial analysis Help manage stakeholder expectations through clear communication on costs, variations, and project progress Assist in submitting Early Warning Notices (EWNs) and preparing early warning assessments to help identify and manage potential project risks What we will need from you Ability to read a construction programme and relevance of the critical path Understanding of H&S issues at work Awareness of dispute resolution procedures Adept at understanding construction drawings and able to measure and take off accurately Understanding of the inter relationship between bills, specifications, and drawings Understanding of construction contracts in relation to projects and of the relevance of subcontract terms and conditions Ability to assess and value minor changes/variations in compliance with contract terms Basic knowledge of different industry contracts Basic understanding of risk in construction process Proficient in use of Microsoft packages e.g. Excel, Word & PowerPoint Ability to communicate effectively with a range of people. Experience of working on a live project, undertaking measurement and valuation functions Experience of managing low risk sub contractors Experience of processing subcontract payments Ability to organise and plan your workload. Working towards professional accreditation e.g. RICS, CIOB, ICES (desirable) Hold a relevant CSCS card Location Mandatory to work 3/ 4 days on site (including Clearwater, Reading) What we can offer you Competitive salary (to be discussed on application) Car allowance (to be discussed on application) 26 days annual leave (with the opportunity to buy or sell up to 3 days holiday) Private medical insurance for yourself (with the option to buy family cover) Life Assurance Defined contribution pension scheme matched up to 8% 2 days volunteering opportunities Flexible and Agile working (dependent on your role) Employee Assistance Programme Professional membership fees Flexible Benefits scheme which includes the opportunity to purchase benefits such as: Critical illness insurance (with option to purchase for your partner) Dental Insurance Travel insurance Cycle to work scheme Retail vouchers/payroll giving/activity pass for top leisure attractions Who we are Tilbury Douglas is a leading UK building, infrastructure, engineering and fit out company. We deliver vital projects across a range of sectors including health, education, highways, justice, defence, aviation, water and environment. It is our people who make Tilbury Douglas a success. We believe our inclusive culture encourages new ways of thinking, enabling us to innovate whilst remaining resilient. We value and celebrate all individual differences and look forward to receiving your application. We are currently working towards Investors in Diversity accredited status. Please note we do not have a sponsorship license. Please note that this role is subject to Baseline Personnel Security Standard (BPSS) clearance which includes identity, employment history, and criminal record checks. We look forward to receiving your application!
Job Description - Design Engineer - Electrical () Job Title: Electrical Design Engineer Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Up to £42,000 depending on skills and experience What you'll be doing: Production of Installation Design Solutions for the introduction of new equipment into Maritime Platforms. These solutions consist of Electrical/System Drawings, Cable Route Drawings, Cable Data Sheets, Bill of Materials and associated Installation Instructions. Liaison with MoD Customer and Industry Partners throughout the Design process developing agreed Equipment Integration Requirements. Undertake Ship Surveys in support of Design Integration, Equipment Material State Reports, Equipment Configuration Control and Ship Power and Load Chart Management. Configuring and Maintaining Ship Databases for Electrical Power Distribution and Blown Fibre Networks. Production of Ship/Equipment Feasibility Studies. Collaborate with in-house Mechanical, Structural, HVAC and Project Management Teams. Collaborate with Industry Partners and Technical Authorities. Support Ship-build and Submarine electrical detailed design activities. Provide a technical input to the Product Safety of Design Services deliverables Your skills and experiences: Knowledge of Electrical Systems theory Interpretation and application of Electrical Design Standards Working knowledge of Electrical Installation Practices and Electrical Distribution Systems Working knowledge/understanding of CAD/Engineering Drawing Toolsets IT literate in Microsoft Office applications ONC/HNC in Electrical Engineering or equivalent All Candidates must be able to obtain UK Security Clearance to SC level As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Design Services - Electrical Team: Our Team of engineers is sourced from a combination of Industry, Armed Forces Service Leavers and our own BAE Apprenticeship Schemes. Working in tandem with our Structures & Outfit, HVAC, Mechanical & Piping and Safety Teams we provide through life electrical engineering support to all Royal Naval Surface Fleet, Royal Fleet Auxiliary and Submarine Platforms. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 2nd January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Dec 15, 2025
Full time
Job Description - Design Engineer - Electrical () Job Title: Electrical Design Engineer Location: Portsmouth Naval Base. We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. Salary: Up to £42,000 depending on skills and experience What you'll be doing: Production of Installation Design Solutions for the introduction of new equipment into Maritime Platforms. These solutions consist of Electrical/System Drawings, Cable Route Drawings, Cable Data Sheets, Bill of Materials and associated Installation Instructions. Liaison with MoD Customer and Industry Partners throughout the Design process developing agreed Equipment Integration Requirements. Undertake Ship Surveys in support of Design Integration, Equipment Material State Reports, Equipment Configuration Control and Ship Power and Load Chart Management. Configuring and Maintaining Ship Databases for Electrical Power Distribution and Blown Fibre Networks. Production of Ship/Equipment Feasibility Studies. Collaborate with in-house Mechanical, Structural, HVAC and Project Management Teams. Collaborate with Industry Partners and Technical Authorities. Support Ship-build and Submarine electrical detailed design activities. Provide a technical input to the Product Safety of Design Services deliverables Your skills and experiences: Knowledge of Electrical Systems theory Interpretation and application of Electrical Design Standards Working knowledge of Electrical Installation Practices and Electrical Distribution Systems Working knowledge/understanding of CAD/Engineering Drawing Toolsets IT literate in Microsoft Office applications ONC/HNC in Electrical Engineering or equivalent All Candidates must be able to obtain UK Security Clearance to SC level As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The Design Services - Electrical Team: Our Team of engineers is sourced from a combination of Industry, Armed Forces Service Leavers and our own BAE Apprenticeship Schemes. Working in tandem with our Structures & Outfit, HVAC, Mechanical & Piping and Safety Teams we provide through life electrical engineering support to all Royal Naval Surface Fleet, Royal Fleet Auxiliary and Submarine Platforms. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 2nd January 2026 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Location: various MoD client sites or at main depot Salary: £36,691 + £3,000 Sponsored Reserve Payment (where applicable) Hours: 40 per week, Monday to Friday (occasional weekend work) About the Role This is a hands-on engineering role maintaining a fleet of modern plant and materials-handling equipment used to support UK Defence operations. Working for this Defence business, you will carry out inspections, servicing, diagnostics and repairs on a range of assets including forklifts, telehandlers, excavators, generators, lighting towers and mechanical plant used across military environments. This position sits within a long-term MOD contract, offering outstanding job security, structured training and genuine progression opportunities. What You Will Be Doing Performing planned maintenance, fault-finding, servicing and repairs on plant and MHE equipment. Diagnosing mechanical, hydraulic and electrical issues and completing high-quality repairs. Carrying out pre-delivery inspections and ensuring equipment meets safety and compliance standards. Maintaining accurate service records, job documentation and parts requests. Liaising with controllers and site contacts to update on progress, repair scope and timescales. Working safely in line with MOD and site regulations, promoting a strong safety culture. Delivering a professional, reliable service to ensure equipment availability and operational readiness. About You We are looking for skilled engineers or technicians with experience in plant, HGV, automotive or materials-handling environments. Ideal candidates will have: Level 3 qualification (or equivalent experience) in Plant, Mechanical, Automotive or Electrical Maintenance. Strong knowledge of mechanical, hydraulic and electrical systems. Experience diagnosing and repairing technical faults. Ability to work independently, manage workload and prioritise tasks. High level of attention to detail, safety awareness and technical competence. Ex-military engineering backgrounds (REME, RAF, Royal Engineers, RLC) are highly valued but not essential. Willingness to undertake Sponsored Reserve training where required. What Youll Get Stable, long-term role supporting critical Defence operations. Competitive salary plus Sponsored Reserve allowance. Fully funded training and development opportunities. Supportive, inclusive team environment with real progression pathways. Strong benefits package including pension and flexible benefits options. Why This Role Is Better Than a Typical Maintenance Engineer Position You work on a diverse range of equipment rather than being tied to one machine or environment. You gain MOD experience, enhancing long-term career value and security. You join a highly respected engineering contractor operating on major Defence programmes. You receive unique training opportunities not available in civilian-only roles. Your work directly contributes to operational capability, giving real purpose and job satisfaction. How to Apply If you are a skilled Maintenance Engineer, Plant Technician, HGV Mechanic, REME Engineer or similar, and you want a role with stability, variety and progression, apply today with your CV. JBRP1_UKTJ
Dec 15, 2025
Full time
Location: various MoD client sites or at main depot Salary: £36,691 + £3,000 Sponsored Reserve Payment (where applicable) Hours: 40 per week, Monday to Friday (occasional weekend work) About the Role This is a hands-on engineering role maintaining a fleet of modern plant and materials-handling equipment used to support UK Defence operations. Working for this Defence business, you will carry out inspections, servicing, diagnostics and repairs on a range of assets including forklifts, telehandlers, excavators, generators, lighting towers and mechanical plant used across military environments. This position sits within a long-term MOD contract, offering outstanding job security, structured training and genuine progression opportunities. What You Will Be Doing Performing planned maintenance, fault-finding, servicing and repairs on plant and MHE equipment. Diagnosing mechanical, hydraulic and electrical issues and completing high-quality repairs. Carrying out pre-delivery inspections and ensuring equipment meets safety and compliance standards. Maintaining accurate service records, job documentation and parts requests. Liaising with controllers and site contacts to update on progress, repair scope and timescales. Working safely in line with MOD and site regulations, promoting a strong safety culture. Delivering a professional, reliable service to ensure equipment availability and operational readiness. About You We are looking for skilled engineers or technicians with experience in plant, HGV, automotive or materials-handling environments. Ideal candidates will have: Level 3 qualification (or equivalent experience) in Plant, Mechanical, Automotive or Electrical Maintenance. Strong knowledge of mechanical, hydraulic and electrical systems. Experience diagnosing and repairing technical faults. Ability to work independently, manage workload and prioritise tasks. High level of attention to detail, safety awareness and technical competence. Ex-military engineering backgrounds (REME, RAF, Royal Engineers, RLC) are highly valued but not essential. Willingness to undertake Sponsored Reserve training where required. What Youll Get Stable, long-term role supporting critical Defence operations. Competitive salary plus Sponsored Reserve allowance. Fully funded training and development opportunities. Supportive, inclusive team environment with real progression pathways. Strong benefits package including pension and flexible benefits options. Why This Role Is Better Than a Typical Maintenance Engineer Position You work on a diverse range of equipment rather than being tied to one machine or environment. You gain MOD experience, enhancing long-term career value and security. You join a highly respected engineering contractor operating on major Defence programmes. You receive unique training opportunities not available in civilian-only roles. Your work directly contributes to operational capability, giving real purpose and job satisfaction. How to Apply If you are a skilled Maintenance Engineer, Plant Technician, HGV Mechanic, REME Engineer or similar, and you want a role with stability, variety and progression, apply today with your CV. JBRP1_UKTJ
Service Engineer / Field Service Technician / Installation Engineer required to join a leading compressed air manufacturer. The Successful Service Engineer will provide electrical and mechanical repair, service, and maintenance on compressed air equipment at customer sites across the M62 corridor and surrounding areas. The Service Engineer will ideally have a field Service background in electrical and/or mechanical engineering such as compressors, filtration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, rotating equipment or similar compressed air related equipment. Package £35,000-£40,000 depending on experience Company van Company card for expenses Core hours Mon to Fri, (08:00 - 16:30) with overtime available Phone and laptop provided Technicians incentive scheme Company pension Additional benefits Role To provide electrical and mechanical repair, service and maintenance of compressed air equipment at customer sites. The Compressor Service Engineer will undertake planned and preventative maintenance, provide advice, diagnostics, fault finding of compressed air systems, vacuum pumps, blowers & dryers, nitrogen generators and other compressed air products. Maintain, repair and install air compressors, vacuum pumps, blowers & dryers, nitrogen generators and other compressed air and pneumatic equipment across the M62 and surrounding areas. Perform emergency breakdown fault finding and repairs on various compressed air equipment. Liaise with various engineering departments. Requirements Proven diagnostic skills on complicated electrical/mechanical engineering systems. Experience as a Field Service Engineer / Service Engineer / Service Technician / Installation Engineer / Compressor Engineer / Mechanical Engineer / M&E Engineer or similar. The ability in maintaining good professional working relationships with existing and new customers. Good working knowledge of three phase electrics and controls is advantageous. Field servicing background in compressors, filtration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps. motors, rotating equipment, capital equipment is advantageous. Full product training provided. A technical mechanical / electrical / electronic / instrumentation qualification, apprentice trained, HNC, HND or Degree would be advantageous. JBRP1_UKTJ
Dec 15, 2025
Full time
Service Engineer / Field Service Technician / Installation Engineer required to join a leading compressed air manufacturer. The Successful Service Engineer will provide electrical and mechanical repair, service, and maintenance on compressed air equipment at customer sites across the M62 corridor and surrounding areas. The Service Engineer will ideally have a field Service background in electrical and/or mechanical engineering such as compressors, filtration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, rotating equipment or similar compressed air related equipment. Package £35,000-£40,000 depending on experience Company van Company card for expenses Core hours Mon to Fri, (08:00 - 16:30) with overtime available Phone and laptop provided Technicians incentive scheme Company pension Additional benefits Role To provide electrical and mechanical repair, service and maintenance of compressed air equipment at customer sites. The Compressor Service Engineer will undertake planned and preventative maintenance, provide advice, diagnostics, fault finding of compressed air systems, vacuum pumps, blowers & dryers, nitrogen generators and other compressed air products. Maintain, repair and install air compressors, vacuum pumps, blowers & dryers, nitrogen generators and other compressed air and pneumatic equipment across the M62 and surrounding areas. Perform emergency breakdown fault finding and repairs on various compressed air equipment. Liaise with various engineering departments. Requirements Proven diagnostic skills on complicated electrical/mechanical engineering systems. Experience as a Field Service Engineer / Service Engineer / Service Technician / Installation Engineer / Compressor Engineer / Mechanical Engineer / M&E Engineer or similar. The ability in maintaining good professional working relationships with existing and new customers. Good working knowledge of three phase electrics and controls is advantageous. Field servicing background in compressors, filtration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps. motors, rotating equipment, capital equipment is advantageous. Full product training provided. A technical mechanical / electrical / electronic / instrumentation qualification, apprentice trained, HNC, HND or Degree would be advantageous. JBRP1_UKTJ
Job Title: Electricians / Approved Electricians Salary: £35k - £50k per annum (inclusive of overtime and on call) Location: Aberdeen Job Type: Full Time, Permanent HF Group is one of the UK's leading multi-discipline building services contractors, delivering high-quality solutions across Electrical, Mechanical, Fire & Security, Telecommunications, and Automated Controls. With a legacy spanning over 3 centuries and a family culture, we consider all of our employees as part of the family and invaluable assets to our ongoing business. Our head office is in Glasgow with offices in Edinburgh, Manchester, Belfast and Aberdeen, providing services to clients across both public and private sectors throughout the UK. About the Role: As part of our continued growth were searching for skilled and motivated Electricians / Approved Electricians to join our Electrical Division in Aberdeen. The successful candidates will be responsible for delivering high-quality electrical installations, maintenance, and testing across commercial and industrial sites. This is a fantastic opportunity to work on diverse projects while advancing your career in a supportive and safety-focused environment. Key Responsibilities: Carrying out electrical installations in accordance with BS7671 and current building regulations Performing inspection, testing, and certification of electrical systems Diagnosing and repairing faults efficiently and safely Supervising apprentices and junior electricians Maintaining accurate documentation and compliance records Liaising with clients and site managers to ensure smooth project delivery Carrying out regular PPM visits Reviewing engineers' reports and pricing remedial works accordingly, ensuring accuracy and profitability About you: Key Skills, Qualifications and Experience Required: SJIB Electrician / Approved Electrician status or equivalent 18th Edition Wiring Regulations ECS grading card (Gold) C&G 2391 - Inspection & Testing (Preferred) Proven experience in commercial or industrial electrical work Strong understanding of health & safety practices Full UK driving license EV experience is desirable IPAF 3a & 3b is desirable In Return We Offer: Competitive Salary, Paid Weekly and Overtime Opportunities 32 Days Holiday (inclusive of bank holidays) Pension Scheme Death in Service Scheme Private Medical Care Critical Illness Care Perkbox Subscriptions Full uniform / PPE provided Van / fuel card for business use Ongoing training and development Supportive team culture with room to grow Additional Information: Applications close on Friday, 2nd January 2026, if you have not heard from us within 4 weeks of the closing date, please assume your application has been unsuccessful on this occasion. HF Group is an equal opportunity employer, committed to fostering a diverse and inclusive workplace. Please click the APPLY button to send your CV and Cover Letter for this role. Candidates with the experience or relevant job titles of; Electrician, Electrical Installation Engineer, Commercial Electrician, Qualified Electrician, Approved Electrician, Multi Skilled Electrical Technician, Maintenance Electrician, Electrical Testing & Compliance Engineer may also be considered for this role. JBRP1_UKTJ
Dec 15, 2025
Full time
Job Title: Electricians / Approved Electricians Salary: £35k - £50k per annum (inclusive of overtime and on call) Location: Aberdeen Job Type: Full Time, Permanent HF Group is one of the UK's leading multi-discipline building services contractors, delivering high-quality solutions across Electrical, Mechanical, Fire & Security, Telecommunications, and Automated Controls. With a legacy spanning over 3 centuries and a family culture, we consider all of our employees as part of the family and invaluable assets to our ongoing business. Our head office is in Glasgow with offices in Edinburgh, Manchester, Belfast and Aberdeen, providing services to clients across both public and private sectors throughout the UK. About the Role: As part of our continued growth were searching for skilled and motivated Electricians / Approved Electricians to join our Electrical Division in Aberdeen. The successful candidates will be responsible for delivering high-quality electrical installations, maintenance, and testing across commercial and industrial sites. This is a fantastic opportunity to work on diverse projects while advancing your career in a supportive and safety-focused environment. Key Responsibilities: Carrying out electrical installations in accordance with BS7671 and current building regulations Performing inspection, testing, and certification of electrical systems Diagnosing and repairing faults efficiently and safely Supervising apprentices and junior electricians Maintaining accurate documentation and compliance records Liaising with clients and site managers to ensure smooth project delivery Carrying out regular PPM visits Reviewing engineers' reports and pricing remedial works accordingly, ensuring accuracy and profitability About you: Key Skills, Qualifications and Experience Required: SJIB Electrician / Approved Electrician status or equivalent 18th Edition Wiring Regulations ECS grading card (Gold) C&G 2391 - Inspection & Testing (Preferred) Proven experience in commercial or industrial electrical work Strong understanding of health & safety practices Full UK driving license EV experience is desirable IPAF 3a & 3b is desirable In Return We Offer: Competitive Salary, Paid Weekly and Overtime Opportunities 32 Days Holiday (inclusive of bank holidays) Pension Scheme Death in Service Scheme Private Medical Care Critical Illness Care Perkbox Subscriptions Full uniform / PPE provided Van / fuel card for business use Ongoing training and development Supportive team culture with room to grow Additional Information: Applications close on Friday, 2nd January 2026, if you have not heard from us within 4 weeks of the closing date, please assume your application has been unsuccessful on this occasion. HF Group is an equal opportunity employer, committed to fostering a diverse and inclusive workplace. Please click the APPLY button to send your CV and Cover Letter for this role. Candidates with the experience or relevant job titles of; Electrician, Electrical Installation Engineer, Commercial Electrician, Qualified Electrician, Approved Electrician, Multi Skilled Electrical Technician, Maintenance Electrician, Electrical Testing & Compliance Engineer may also be considered for this role. JBRP1_UKTJ
Job Description - Senior Manufacturing Engineer - Producibility () Senior Manufacturing Engineer - Producibility - Job Title: Senior Manufacturing Engineer - Producibility Location: Warton - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. What you'll be doing: Working alongside the Technology and Toolset Capability development teams, this role will involve the development and demonstration of producibility processes within the Factory of the Future Manufacturing Engineering team. Collaborate with cross functional teams to understand project requirements and provide producibility deliverables accordingly to meet business requirements. Work closely with design and Technology R&D teams to integrate simulation feedback into the product development lifecycle. Support activities to mature Siemens toolset processes by applying to demonstrator products and feedback to development team Where required, demonstrate the toolset capability within customer / stakeholder reviews / engagement forums. Interface with a range of stakeholders including internal and External Customer, Manufacturing Function, Subject Matter Experts (SME), Toolset Development Teams, Siemens support engineers Your skills and experiences: Demonstrated experience in a production manufacturing role. Excellent problem solving skills and attention to detail in analysing complex engineering processes. Demonstrate a flexible approach, adapting their approach to the differing timescales of early lifecycle products. Minimum HND in an Engineering discipline and/or equivalent qualification/experience Experience in the engineering and manufacture of mechanical assembly products Familiarity with Air Sector Manufacturing Engineering policies and processes Experience with engineering toolsets (Siemens NX / Siemens RAC (Rich Access Client) / CAD / PLM / SAPCAMS) Knowledge of GD&T (Geometric Dimensioning and Tolerancing) Understanding of digital inspection e.g. CMM (co-ordinate measuring machine), laser tracker You'll receive benefits including a competitive pension scheme, enhanced annual leave allowance and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The Manufacturing Engineering Delivering Team: As one of the FalconWorks Technology Environments, Factory of the Future is responsible for developing, integrating and demonstrating new technologies and capabilities, to validate the benefits of novel methods and support provide a unique environment in which to engineer and manufacture one-off demonstrator products. This role will be based within the Factory of the Future, Manufacturing Engineering delivery team. Specifically the role will be focussed around the development and demonstration of the Siemens Connected toolset, establishing an initial producibility capability within the Manufacturing Engineering delivery team. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 26th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
Dec 15, 2025
Full time
Job Description - Senior Manufacturing Engineer - Producibility () Senior Manufacturing Engineer - Producibility - Job Title: Senior Manufacturing Engineer - Producibility Location: Warton - We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role. What you'll be doing: Working alongside the Technology and Toolset Capability development teams, this role will involve the development and demonstration of producibility processes within the Factory of the Future Manufacturing Engineering team. Collaborate with cross functional teams to understand project requirements and provide producibility deliverables accordingly to meet business requirements. Work closely with design and Technology R&D teams to integrate simulation feedback into the product development lifecycle. Support activities to mature Siemens toolset processes by applying to demonstrator products and feedback to development team Where required, demonstrate the toolset capability within customer / stakeholder reviews / engagement forums. Interface with a range of stakeholders including internal and External Customer, Manufacturing Function, Subject Matter Experts (SME), Toolset Development Teams, Siemens support engineers Your skills and experiences: Demonstrated experience in a production manufacturing role. Excellent problem solving skills and attention to detail in analysing complex engineering processes. Demonstrate a flexible approach, adapting their approach to the differing timescales of early lifecycle products. Minimum HND in an Engineering discipline and/or equivalent qualification/experience Experience in the engineering and manufacture of mechanical assembly products Familiarity with Air Sector Manufacturing Engineering policies and processes Experience with engineering toolsets (Siemens NX / Siemens RAC (Rich Access Client) / CAD / PLM / SAPCAMS) Knowledge of GD&T (Geometric Dimensioning and Tolerancing) Understanding of digital inspection e.g. CMM (co-ordinate measuring machine), laser tracker You'll receive benefits including a competitive pension scheme, enhanced annual leave allowance and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The Manufacturing Engineering Delivering Team: As one of the FalconWorks Technology Environments, Factory of the Future is responsible for developing, integrating and demonstrating new technologies and capabilities, to validate the benefits of novel methods and support provide a unique environment in which to engineer and manufacture one-off demonstrator products. This role will be based within the Factory of the Future, Manufacturing Engineering delivery team. Specifically the role will be focussed around the development and demonstration of the Siemens Connected toolset, establishing an initial producibility capability within the Manufacturing Engineering delivery team. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 26th December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role . Therefore, if you are interested, please submit your application as early as possible.
I am working with a fantastic client throughout the UK and looking to recruit an experienced field service material handling engineer, ideally mechanically biased in the Stevenage/Hitchin area. This role offers extensive training and career progression. Responsibilities for this role include: To find, diagnose and rectify faults on customer FLT's as deemed necessary, with all that this entails, and order the necessary spare parts as efficiently as possible. To provide reliable information to the customer with regards to maintenance, consultation on repairs and to provide advice on the use of equipment and updates on repairs. Ensure automated system and all paperwork (job sheets, timesheets and purchase requisitions and parts paperwork) /IT systems are. To liaise with the Service Controller, customer and Service Manager to ensure information regarding individual forklifts and equipment is shared. To make proposals for the improvements and ensuring that Engineering Standards and Safe Working Practices are followed at all times. Monitor stock levels/movement records and obtain hour meter readings /site information at every visit. Ensure all company issued equipment and tooling (including van, laptop, printer etc) is kept in a satisfactory, clean and safe condition and report any failures. Ideally to apply for this role you will have: NVQ Level 3 or equivalent associated occupation. Mechanical hydraulic and/or electrical competencies. Hold a full and valid driving licence. Fantastic communication skills to liaise with customers and internal colleagues. Sound IT knowledge/skills, e.g. word, Excel, email. Ability to prioritise and work independently and as part of a team. Also w work under own initiative. A positive, flexible approach and can-do attitude. Previous experience working as a forklift technician, plant fitter, plant or vehicle technician ideally and from motor, plant or agricultural background. What's in It for You? A competitive salary of up to £42,000. Overtime available Options to take a 40 hour contract or 45 hour contract A Monday to Friday shift pattern - 8am - 4.30pm Career development opportunities, with tailored training and the potential for internal promotions. The chance to join a forward-thinking business that values and rewards talent. Ready to Take the Next Step? Send your CV today and take the next step in your career with a company that invests in your future.
Dec 15, 2025
Full time
I am working with a fantastic client throughout the UK and looking to recruit an experienced field service material handling engineer, ideally mechanically biased in the Stevenage/Hitchin area. This role offers extensive training and career progression. Responsibilities for this role include: To find, diagnose and rectify faults on customer FLT's as deemed necessary, with all that this entails, and order the necessary spare parts as efficiently as possible. To provide reliable information to the customer with regards to maintenance, consultation on repairs and to provide advice on the use of equipment and updates on repairs. Ensure automated system and all paperwork (job sheets, timesheets and purchase requisitions and parts paperwork) /IT systems are. To liaise with the Service Controller, customer and Service Manager to ensure information regarding individual forklifts and equipment is shared. To make proposals for the improvements and ensuring that Engineering Standards and Safe Working Practices are followed at all times. Monitor stock levels/movement records and obtain hour meter readings /site information at every visit. Ensure all company issued equipment and tooling (including van, laptop, printer etc) is kept in a satisfactory, clean and safe condition and report any failures. Ideally to apply for this role you will have: NVQ Level 3 or equivalent associated occupation. Mechanical hydraulic and/or electrical competencies. Hold a full and valid driving licence. Fantastic communication skills to liaise with customers and internal colleagues. Sound IT knowledge/skills, e.g. word, Excel, email. Ability to prioritise and work independently and as part of a team. Also w work under own initiative. A positive, flexible approach and can-do attitude. Previous experience working as a forklift technician, plant fitter, plant or vehicle technician ideally and from motor, plant or agricultural background. What's in It for You? A competitive salary of up to £42,000. Overtime available Options to take a 40 hour contract or 45 hour contract A Monday to Friday shift pattern - 8am - 4.30pm Career development opportunities, with tailored training and the potential for internal promotions. The chance to join a forward-thinking business that values and rewards talent. Ready to Take the Next Step? Send your CV today and take the next step in your career with a company that invests in your future.
Job Description - Assembly Technician - Wiring () Assembly Technician - Wiring - Job title: Assembly Technician - Wiring Location: Cowes, Isle of Wight What you'll be doing: Assembly, Repair and Modification of products from Line Replaceable Units through to Radar systems Using business systems and processes to record and evidence compliance Assisting and supporting development of other personnel Your skills and experiences: Formally qualified in appropriate electrical assembly Workmanship Standards, have completed a relevant apprenticeship or have proven relevant experience. Awareness and working understanding of ISO 9001, ISO 14001 & OHSAS 18001 Be able to perform complex assembly, disassembly or modification of electro mechanical subassemblies Have prototyping capability utilising limited data and documentation to support 1st off build and able to provide clear and accurate feedback for product, process development Experienced in reading and interpreting technical drawing, wiring schedules and circuit diagrams Whilst the primary role is electrical, experience in mechanical workshop practices and techniques is desirable You'll receive benefits including a competitive pension scheme, enhanced annual leave allowance and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The Assembly Technician team: Would you like to work with cutting edge products in Radar Technology? We currently have a vacancy for an Assembly Technician at our site in Cowes, Isle of Wight. As an Manufacturing Assembly Technician, you will be part of an experienced team responsible for the Manufacturer, Repair or Modification of Units and Products in a technological manufacturing environment whilst also supporting Design Engineering in Future Product Development. Radar is an exciting and unique field, with increasingly sophisticated electronics, materials and products. This role will provide you with the chance to develop your skills, with the potential for career progression opportunities in the future. Our workplace in Cowes is an easily accessible commute from Southampton with a regular foot passenger ferry and BAE shuttle service from the ferry terminal to site. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 3 rd December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
Dec 15, 2025
Full time
Job Description - Assembly Technician - Wiring () Assembly Technician - Wiring - Job title: Assembly Technician - Wiring Location: Cowes, Isle of Wight What you'll be doing: Assembly, Repair and Modification of products from Line Replaceable Units through to Radar systems Using business systems and processes to record and evidence compliance Assisting and supporting development of other personnel Your skills and experiences: Formally qualified in appropriate electrical assembly Workmanship Standards, have completed a relevant apprenticeship or have proven relevant experience. Awareness and working understanding of ISO 9001, ISO 14001 & OHSAS 18001 Be able to perform complex assembly, disassembly or modification of electro mechanical subassemblies Have prototyping capability utilising limited data and documentation to support 1st off build and able to provide clear and accurate feedback for product, process development Experienced in reading and interpreting technical drawing, wiring schedules and circuit diagrams Whilst the primary role is electrical, experience in mechanical workshop practices and techniques is desirable You'll receive benefits including a competitive pension scheme, enhanced annual leave allowance and a Company contributed Share Incentive Plan. You'll also have access to additional benefits such as flexible working, an employee assistance programme, Cycle2work and employee discounts - you may also be eligible for an annual incentive. The Assembly Technician team: Would you like to work with cutting edge products in Radar Technology? We currently have a vacancy for an Assembly Technician at our site in Cowes, Isle of Wight. As an Manufacturing Assembly Technician, you will be part of an experienced team responsible for the Manufacturer, Repair or Modification of Units and Products in a technological manufacturing environment whilst also supporting Design Engineering in Future Product Development. Radar is an exciting and unique field, with increasingly sophisticated electronics, materials and products. This role will provide you with the chance to develop your skills, with the potential for career progression opportunities in the future. Our workplace in Cowes is an easily accessible commute from Southampton with a regular foot passenger ferry and BAE shuttle service from the ferry terminal to site. Why BAE Systems? This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 3 rd December 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.
SharePoint Developer Hybrid (London or Preston) At Peregrine, were always seeking Specialist Talent that have the ideal mix of skills, experience, and attitude, to place with our vast array of clients. From Business Analysts in large government organisations to Software Developers in the private sector we are always in search of the best talent to place, now. Overview An exciting opportunity has arisen for an experienced SharePoint Developer to join a forward-thinking organisation undergoing significant digital transformation. You will work within an agile product squad to design, develop and enhance enterprise SharePoint solutions that support business-wide collaboration and productivity. This role is ideal for someone who enjoys end-to-end ownership, from shaping requirements to delivering robust, well-engineered solutions. Key Responsibilities You will be responsible for: Translating business requirements into Epics, Features and User Stories within an agile framework Developing, deploying and maintaining SharePoint systems, solutions and code to support business processes Leading software construction activities using appropriate tools, practices and development methods Creating technical specifications, solution designs and high-quality programme code Conducting technical testing in controlled environments before release Maintaining SharePoint Online, SharePoint Farms, and OneDriveincluding configuration, housekeeping, data cleansing, bug fixes and reducing technical debt Designing system components using modelling techniques and agreed design standards Evaluating design options, prototyping behaviours, and supporting architecture reviews Collaborating within cross-functional teams and managing shifting priorities while maintaining delivery focus Skills & Experience Required 5+ years experience in SharePoint development, deployment and support (SharePoint Online essential) Strong experience with Microsoft 365 integration, OneDrive, and the Power Platform (PowerApps, Power BI, Power Automate) Background in DevOps or agile delivery environments Ability to support large change requests and project delivery Strong stakeholder engagement and communication skills Highly organised, detail-driven, and committed to continuous improvement Desirable Certifications ITIL Foundation (required) with Intermediate/Advanced modules desirable Agile certifications (e.g., ScrumMaster, Product Owner) Microsoft MS900 and AZ900 expected Working Model Hybrid working with flexibility to work from London or Preston offices Join a collaborative team environment with opportunities for ongoing development About Peregrine We build workforces that deliver tech and change programmes at leading UK organisations. By combining data science from Peregrine Intelligence, our industry-accredited Peregrine Academy, and market-leading attraction and diversity initiatives, we bridge capability gaps at all levels in public and private sector organisations. We work closely with our clients to understand their challenges and deliver flexible, long-term solutions that make a real difference. When you join Peregrine, you become part of a team thats focused on growth, both yours, our clients, and the sectors we support. Youll also get access to a full range of benefits alongside your salary. How Specialist Talent Works As a permanent employee at Peregrine, youll be part of our Specialist Talent team. That means youll work on-site or remotely with our clients, supporting them on complex, high-impact projects in Data, Digital and Business Transformation. Youll get the variety and challenge of consultancy work, with the stability and support of a permanent role. Youre not a contractor - youre a valued member of our team, with access to all the same benefits, learning opportunities, and community. Our Culture Were curious, open, and always learning. We believe in doing great work and doing it with integrity. We support each other, share ideas freely, and celebrate progress big and small. And we care about the impact we make, whether thats helping clients solve tough problems or creating opportunities for people from all walks of life. Diversity and Inclusion Were proud to be a diverse team, with 20+ nationalities represented across Peregrine. We welcome people from all backgrounds and experiences, and were committed to building an inclusive workplace where everyone can thrive. Through our partnerships and internal initiatives, were working to improve social mobility, reduce our environmental impact, and help our clients build more inclusive teams too. JBRP1_UKTJ
Dec 15, 2025
Full time
SharePoint Developer Hybrid (London or Preston) At Peregrine, were always seeking Specialist Talent that have the ideal mix of skills, experience, and attitude, to place with our vast array of clients. From Business Analysts in large government organisations to Software Developers in the private sector we are always in search of the best talent to place, now. Overview An exciting opportunity has arisen for an experienced SharePoint Developer to join a forward-thinking organisation undergoing significant digital transformation. You will work within an agile product squad to design, develop and enhance enterprise SharePoint solutions that support business-wide collaboration and productivity. This role is ideal for someone who enjoys end-to-end ownership, from shaping requirements to delivering robust, well-engineered solutions. Key Responsibilities You will be responsible for: Translating business requirements into Epics, Features and User Stories within an agile framework Developing, deploying and maintaining SharePoint systems, solutions and code to support business processes Leading software construction activities using appropriate tools, practices and development methods Creating technical specifications, solution designs and high-quality programme code Conducting technical testing in controlled environments before release Maintaining SharePoint Online, SharePoint Farms, and OneDriveincluding configuration, housekeeping, data cleansing, bug fixes and reducing technical debt Designing system components using modelling techniques and agreed design standards Evaluating design options, prototyping behaviours, and supporting architecture reviews Collaborating within cross-functional teams and managing shifting priorities while maintaining delivery focus Skills & Experience Required 5+ years experience in SharePoint development, deployment and support (SharePoint Online essential) Strong experience with Microsoft 365 integration, OneDrive, and the Power Platform (PowerApps, Power BI, Power Automate) Background in DevOps or agile delivery environments Ability to support large change requests and project delivery Strong stakeholder engagement and communication skills Highly organised, detail-driven, and committed to continuous improvement Desirable Certifications ITIL Foundation (required) with Intermediate/Advanced modules desirable Agile certifications (e.g., ScrumMaster, Product Owner) Microsoft MS900 and AZ900 expected Working Model Hybrid working with flexibility to work from London or Preston offices Join a collaborative team environment with opportunities for ongoing development About Peregrine We build workforces that deliver tech and change programmes at leading UK organisations. By combining data science from Peregrine Intelligence, our industry-accredited Peregrine Academy, and market-leading attraction and diversity initiatives, we bridge capability gaps at all levels in public and private sector organisations. We work closely with our clients to understand their challenges and deliver flexible, long-term solutions that make a real difference. When you join Peregrine, you become part of a team thats focused on growth, both yours, our clients, and the sectors we support. Youll also get access to a full range of benefits alongside your salary. How Specialist Talent Works As a permanent employee at Peregrine, youll be part of our Specialist Talent team. That means youll work on-site or remotely with our clients, supporting them on complex, high-impact projects in Data, Digital and Business Transformation. Youll get the variety and challenge of consultancy work, with the stability and support of a permanent role. Youre not a contractor - youre a valued member of our team, with access to all the same benefits, learning opportunities, and community. Our Culture Were curious, open, and always learning. We believe in doing great work and doing it with integrity. We support each other, share ideas freely, and celebrate progress big and small. And we care about the impact we make, whether thats helping clients solve tough problems or creating opportunities for people from all walks of life. Diversity and Inclusion Were proud to be a diverse team, with 20+ nationalities represented across Peregrine. We welcome people from all backgrounds and experiences, and were committed to building an inclusive workplace where everyone can thrive. Through our partnerships and internal initiatives, were working to improve social mobility, reduce our environmental impact, and help our clients build more inclusive teams too. JBRP1_UKTJ
Continuing Airworthiness Management Support (CAMO) Engineer Summary Morson Talent are currently seeking a CAMS Engineer (Continuing Airworthiness Management Support) on a contracting basis for our large client based out of Middle Wallop. About the Role: Our client are actively seeking a Apache Continuing Airworthiness Management Support (CAMS) Engineer to provide Military Aviation Authority (MAA) Regulatory Publication (MRP) compliant support to the Apache Military Continuing Airworthiness Manager Organisation (Mil CAMO). Based at Middle Wallop Flying Station with the undertaking of Continuing Airworthiness Management (CAM) activities in general and specific to those air systems allocated to our client at Middle Wallop and Wattisham Flying Station, undertaking maintenance, modification and flying training activities. In this role, you will: In accordance with the Apache Long Term Training Support Services (LTTSS) contract provide Military Aviation Authority (MAA) MRP compliant support to the Apache Military Continuing Airworthiness Manager (Mil CAM). The Apache CAMS Engineer will provide direct assistance to the Apache Deputy Continuing Airworthiness Manager (DCAM) and Apache Mil CAMO with the undertaking of CAM activities in general and specific to those air systems allocated to the clients at Middle Wallop and Wattisham Flying Station. Some UK travel is expected. Responsibilities include: Being part of the Continuing Airworthiness (CAw) Management Support Team based at AACen Middle Wallop, which is the main point of contact for the Boeing-contracted MRP Part 145 Approved Maintenance Organisation (AMO) for CAw Management requirements on a day to day basis. Conduct aircraft physical inspections and aircraft document reviews on behalf of the Apache Mil CAMO to provide independent assurance of the Part 145 contracted maintenance activities. Providing feedback to the Apache Product Support Manager and Apache LTTSS Contract Program Management for Customer and LTTSS CAMS satisfaction and regulatory compliance. Development, implementation and continuous improvement of Management Support activities in accordance with the Apache CAME (Continuing Airworthiness Management Exposition) and within the boundaries of the LTTSS contract terms. Support the Mil CAMO in the development, implementation and continuous improvement of CAw Management processes applicable to the clients activity, in accordance with the Apache CAME. Assist the clients Apache CAw Management Lead in liaising between the Mil CAMO and the AMO in Middle Wallop, maintaining oversight of all related CAMO activities, aircraft maintenance and modifications, and ensuring that a proper flow of information is maintained. Provide technical and process compliance support to the AMO in Middle Wallop, in properly understanding and applying all applicable, relevant, and appropriate the clients and Customer CAw Processes and Maintenance Orders, identifying opportunities for improvement. Support the development and maintenance of the Apache Part M Interface Control Document (ICD), outlining the business interfaces in place between the Mil CAMO and Boeing-contracted MRP Part 145 AMO, in undertaking Part M delegated activities. Assisting other functions and capabilities that support the execution of the Mil Continuing Airworthiness Manager's (Mil CAM) Part M responsibilities. Support CAMO Assurance and Surveillance Quality Audits against the clients AMO, proposing, discussing and executing Corrective Actions Plans. Ensure the correct and proper use of the QMS (Quality Management System). Ensure that the Apache CAw Management Support Team remain MRP compliant and have a positive contribution to the Mil CAM's approvals. Attend relevant weekly Safety Meetings to review Occurrence Reports (ORs); support the MSO (Maintenance Safety Official) and the Safety Team in undertaking investigations on OR's with CAw implications, proposing and discussing further actions and follow-up with the Mil CAMO as required. Ensure the correct and proper use of the SMS (Safety Management System). Attend relevant Customer Meetings representing the client. Monitoring any planned or short term changes in Customer requirements and the use of the Apache fleet to sustain delivery of clients CAw Support. Essential Skills, Qualifications and Experience: Experience in the application of MAA Regulations and UK MoD airworthiness policies, processes and culture in an aircraft operations environment. A knowledge of MRP Part M requirements & procedures. A knowledge of MRP Part 145 requirements & procedures. An understanding of Aviation Duty Holder and Accountable Manager (Military Flying) requirements and procedures. Proven aircraft maintenance experience and aircraft technical knowledge. Desirable Skills, qualification and experience: UK Professional Registration (Incorporated Engineer or higher) or international equivalent. Able to demonstrate the ability to work collaboratively on the planning of work and develop/use meaningful metrics to evaluate compliance status and provide performance visibility. Able to effectively execute opportunities to improve strategies, processes and project plans. Assist the removal of obstacles by identifying where and what help is needed and coordinating with the appropriate leaders and team members. Strong communication skills, technical competency, and skills with logistics information and maintenance management tools. Previous industry or military service continuing airworthiness engineering experience. Able to demonstrate experience in the application of air safety standards & safe operating practices. A knowledge of quality management systems including AS9100. Experience in the application of UK MAA MRP, European Aviation Safety Agency (EASA), European Defence Agency (EDA) or Federal Aviation Administration (FAA) Federal Aviation Regulations (FAR) and other international standards for continuing airworthiness. Specific AH64 Apache air system experience and product knowledge. UK MoD Form 700 Series knowledge. If this is of interest please apply today or alternatively contact Oliver Beaumont directly on or .
Dec 15, 2025
Full time
Continuing Airworthiness Management Support (CAMO) Engineer Summary Morson Talent are currently seeking a CAMS Engineer (Continuing Airworthiness Management Support) on a contracting basis for our large client based out of Middle Wallop. About the Role: Our client are actively seeking a Apache Continuing Airworthiness Management Support (CAMS) Engineer to provide Military Aviation Authority (MAA) Regulatory Publication (MRP) compliant support to the Apache Military Continuing Airworthiness Manager Organisation (Mil CAMO). Based at Middle Wallop Flying Station with the undertaking of Continuing Airworthiness Management (CAM) activities in general and specific to those air systems allocated to our client at Middle Wallop and Wattisham Flying Station, undertaking maintenance, modification and flying training activities. In this role, you will: In accordance with the Apache Long Term Training Support Services (LTTSS) contract provide Military Aviation Authority (MAA) MRP compliant support to the Apache Military Continuing Airworthiness Manager (Mil CAM). The Apache CAMS Engineer will provide direct assistance to the Apache Deputy Continuing Airworthiness Manager (DCAM) and Apache Mil CAMO with the undertaking of CAM activities in general and specific to those air systems allocated to the clients at Middle Wallop and Wattisham Flying Station. Some UK travel is expected. Responsibilities include: Being part of the Continuing Airworthiness (CAw) Management Support Team based at AACen Middle Wallop, which is the main point of contact for the Boeing-contracted MRP Part 145 Approved Maintenance Organisation (AMO) for CAw Management requirements on a day to day basis. Conduct aircraft physical inspections and aircraft document reviews on behalf of the Apache Mil CAMO to provide independent assurance of the Part 145 contracted maintenance activities. Providing feedback to the Apache Product Support Manager and Apache LTTSS Contract Program Management for Customer and LTTSS CAMS satisfaction and regulatory compliance. Development, implementation and continuous improvement of Management Support activities in accordance with the Apache CAME (Continuing Airworthiness Management Exposition) and within the boundaries of the LTTSS contract terms. Support the Mil CAMO in the development, implementation and continuous improvement of CAw Management processes applicable to the clients activity, in accordance with the Apache CAME. Assist the clients Apache CAw Management Lead in liaising between the Mil CAMO and the AMO in Middle Wallop, maintaining oversight of all related CAMO activities, aircraft maintenance and modifications, and ensuring that a proper flow of information is maintained. Provide technical and process compliance support to the AMO in Middle Wallop, in properly understanding and applying all applicable, relevant, and appropriate the clients and Customer CAw Processes and Maintenance Orders, identifying opportunities for improvement. Support the development and maintenance of the Apache Part M Interface Control Document (ICD), outlining the business interfaces in place between the Mil CAMO and Boeing-contracted MRP Part 145 AMO, in undertaking Part M delegated activities. Assisting other functions and capabilities that support the execution of the Mil Continuing Airworthiness Manager's (Mil CAM) Part M responsibilities. Support CAMO Assurance and Surveillance Quality Audits against the clients AMO, proposing, discussing and executing Corrective Actions Plans. Ensure the correct and proper use of the QMS (Quality Management System). Ensure that the Apache CAw Management Support Team remain MRP compliant and have a positive contribution to the Mil CAM's approvals. Attend relevant weekly Safety Meetings to review Occurrence Reports (ORs); support the MSO (Maintenance Safety Official) and the Safety Team in undertaking investigations on OR's with CAw implications, proposing and discussing further actions and follow-up with the Mil CAMO as required. Ensure the correct and proper use of the SMS (Safety Management System). Attend relevant Customer Meetings representing the client. Monitoring any planned or short term changes in Customer requirements and the use of the Apache fleet to sustain delivery of clients CAw Support. Essential Skills, Qualifications and Experience: Experience in the application of MAA Regulations and UK MoD airworthiness policies, processes and culture in an aircraft operations environment. A knowledge of MRP Part M requirements & procedures. A knowledge of MRP Part 145 requirements & procedures. An understanding of Aviation Duty Holder and Accountable Manager (Military Flying) requirements and procedures. Proven aircraft maintenance experience and aircraft technical knowledge. Desirable Skills, qualification and experience: UK Professional Registration (Incorporated Engineer or higher) or international equivalent. Able to demonstrate the ability to work collaboratively on the planning of work and develop/use meaningful metrics to evaluate compliance status and provide performance visibility. Able to effectively execute opportunities to improve strategies, processes and project plans. Assist the removal of obstacles by identifying where and what help is needed and coordinating with the appropriate leaders and team members. Strong communication skills, technical competency, and skills with logistics information and maintenance management tools. Previous industry or military service continuing airworthiness engineering experience. Able to demonstrate experience in the application of air safety standards & safe operating practices. A knowledge of quality management systems including AS9100. Experience in the application of UK MAA MRP, European Aviation Safety Agency (EASA), European Defence Agency (EDA) or Federal Aviation Administration (FAA) Federal Aviation Regulations (FAR) and other international standards for continuing airworthiness. Specific AH64 Apache air system experience and product knowledge. UK MoD Form 700 Series knowledge. If this is of interest please apply today or alternatively contact Oliver Beaumont directly on or .
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
Dec 15, 2025
Full time
Principal Electrical Design Engineer - Protection & Control Scotland Region Permanent - Full Time, hybrid Salary Competitive + Car Allowance + Flexible Benefits Summary: This role involves designing and overseeing the implementation of protection schemes, control systems, and related equipment to ensure the safe and reliable operation of power networks, substations, and Transmissions and Distribution electrical infrastructure. Position requires technical expertise and vast experience working in Transmission and Distribution sector for protection & control and Substation Automation system/SCADA design (from 11kV up to 400kV). Candidate should lead the design and specification of protection and control systems for electrical substations, powerplants, and transmission/distribution networks. Roles & Responsibilities: Candidate is responsible to develop protection settings, relay PSL files, coordination studies, including fault detection and isolation strategies. Candidates should have complete knowledge of all TSO/DNO standards & specifications with respect to P&C Design & Calculations, as well as overall Substation Design Works. He/She should ensure compliance with relevant national and international standards (e.g., IEC, BS, IEEE) in protection system design. Candidate should have good knowledge of substation primary design and substation equipment/switchgear specifications. He/She should ensure that the design meets safety standards and regulatory requirements, incorporating protection against electrical hazards, arc flash, and other safety concerns. Design, implement and maintain SCADA/communication systems for a variety of clients in sectors including utilities, oil and gas, manufacturing, industrial automation and various other communication networks. Configure and optimize network infrastructure & communication protocols such as IEC 61850; Distributed Network Protocol (DNP 3); Parallel Redundancy Protocol (PRP); Precision Time Protocol (PTP); Network Time Protocol (NTP); Simplified Network Time Protocol (NTP), Modbus, OPC, Profibus, etc for seamless integration with field devices, including RTUs, PLCs, IEDs, etc, also ensure stable connectivity between SCADA centres & remote sites, and configure secure VPNs & remote access protocols to allow for safe, off-site monitoring and control. Understand client requirements & produce network architecture philosophy diagram, IED telecommunication diagram, SCADA & Telecommunications Panel design, Network IP allocation, I/O Schedules, Cable & Core schedules, etc. Assist with the setup and commissioning of SCADA systems at client sites, troubleshoot field devices and network communication issues, perform preventive and corrective maintenance on SCADA infrastructure and associated hardware. Efficiently design/develop the SCADA/communication systems (e.g., Ignition, Siemens WinCC, GE iFIX, etc) to ensure real-time data acquisition and control for critical infrastructure. Provide remote support for troubleshooting SCADA system and network issues, ensuring minimal downtime and swift resolution of critical incidents. Conduct system upgrades, testing, and validation for new features, components, and patches. Implement cybersecurity measures to safeguard SCADA systems against emerging threats. Collaborate with cross-functional teams to ensure smooth integration and deployment of SCADA systems. Candidate should have experience in tendering, pricing jobs, proposal creation. Candidate should be actively participating in work winning process. Candidate should be capable of technically assessing engineering problems and critically evaluating a range of technical solutions. Unwavering confidence in technically assessing engineering problems and critically evaluating a range of technical solutions will be instrumental in pursuit of engineering excellence. Exemplary communication skills to demonstrate diligence, prioritize tasks effectively, and ensure a thorough understanding of relevant legislation, including CDM and ESQCR. This knowledge will be pivotal in managing Transmission and Distribution network. Collaborate closely with other designers, construction professionals, and engineering teams. Liaise effectively with the Power Systems, Primary and Civil design departments to ensure that all objectives are met and that the best possible design is submitted. Review and provide constructive feedback on the reports and drawings done by Junior & Senior Engineers. Provide technical leadership and mentoring to junior engineers in the design, analysis, and commissioning of protection systems. What we're looking for : Experience: Extensive experience in electrical protection and control system design, Substation Automation and SCADA system typically 12-15 years, with a proven track record of delivering complex projects within the power sector. Technical and Professional knowledge and experience associated with the role. Candidate should have vast experience in crafting Single Line Diagrams, AC & DC Schematic Drawings, Panel General Arrangements, Panel Wiring Diagrams, Switchgear Termination/interconnection drawings, Block Cable Diagrams/Schedules, and performing cable specification/sizing calculations, battery sizing calculations, CT/VT sizing, multicore sizing, Relays CORTEC/specifications. Candidate should have experience in testing & commissioning of P&C, SCADA/Communication/SAS panels. Should be able to Identify potential risks and failures within protection and SCADA systems and propose mitigation strategies. Candidate should have good knowledge & experience working with AutoCAD. Qualifications: Education: Bachelor's degree in electrical engineering (typically 2:1 or above) in Electrical Engineering, Power Systems, or a related field. A master's degree may be preferred for senior roles.Chartered Status (Preferred): Chartered Engineer (CEng) status with a professional body such as the Institution of Engineering and Technology (IET) or the Institution of Electrical Engineers (IEE) is highly desirable.Certifications (Optional): Professional certifications such as NEBOSH for health and safety, or specific training in protection and control system design, may be beneficial.Candidate should have experience working in Substation Automation Syste
BIM TechnicianEast Kilbride, Scotland, Hybrid Permanent - Full Time Competitive (DOE) + Car/ Car Allowance & Flexible Benefits Summary : Freedom's Design team have an exciting opportunity for a BIM Technician to join us on our exciting journey. This is a fantastic time to join as we are growing at an exponential rate. The role of BIM Technician will work in a specialist multi-disciplinary producing accurate electrical models and drawings for a range of large and small-scale engineering projects. The role will support Engineers in the delivery of high-quality design packages contributing to model coordination, drawing production, and digital workflows ensuring projects are delivered to the highest standards. Some of the key deliverables in this role will include: Assist in all BIM related activities in collaboration with the design and project teams. Produce calculations, drawings, and technical reports from 3D Models for design stage, installation, and/or manufacture. Ensure works are completed to a high standard, adhering to Freedom's document control procedures and Client requirements. Adhere to the design, check/review, and approve process, ensuring self-checks and peer checks are completed where necessary. Build and maintain internal relationships with team members. Demonstrate excellent communication between the department and the wider project team. Work from engineers/designers' mark ups to edit or produce accurate and structured models Develop a working knowledge of all HV/LV systems to ensure optimised solutions and enable CDM compliance. Visit site to gain practical experience of HV/LV installation practices and apply these to improve drawing effectiveness models. Does this sound like a role you have envisaged yourself in? What we're looking for: Demonstrable experience working in a design environment Knowledge of BS/ISO BIM standards and electrical engineering codes/regulations. Proficient in AutoCAD Revit MEP, and Navisworks Qualifications: ONC/HNC (or equivalent) in Electrical Engineering, Building Services, or related discipline Formal training or certification in Autodesk Revit MEP Good understanding of engineering drawing standards and BIM processes (ISO 19650 awareness) Why Join Us? At Freedom, we believe in attracting and retaining the best talent by offering great benefits and career progression opportunities, including: Pension with up to 8% employer contribution Private Medical Insurance Personal Wellbeing and Volunteer Days Salary Sacrifice Car Scheme (Hybrid/Electric Vehicle) Flexible benefits (e.g., Dental Insurance, Gym Memberships, Tax-Free Bikes) Ongoing Training & Development Programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be
Dec 15, 2025
Full time
BIM TechnicianEast Kilbride, Scotland, Hybrid Permanent - Full Time Competitive (DOE) + Car/ Car Allowance & Flexible Benefits Summary : Freedom's Design team have an exciting opportunity for a BIM Technician to join us on our exciting journey. This is a fantastic time to join as we are growing at an exponential rate. The role of BIM Technician will work in a specialist multi-disciplinary producing accurate electrical models and drawings for a range of large and small-scale engineering projects. The role will support Engineers in the delivery of high-quality design packages contributing to model coordination, drawing production, and digital workflows ensuring projects are delivered to the highest standards. Some of the key deliverables in this role will include: Assist in all BIM related activities in collaboration with the design and project teams. Produce calculations, drawings, and technical reports from 3D Models for design stage, installation, and/or manufacture. Ensure works are completed to a high standard, adhering to Freedom's document control procedures and Client requirements. Adhere to the design, check/review, and approve process, ensuring self-checks and peer checks are completed where necessary. Build and maintain internal relationships with team members. Demonstrate excellent communication between the department and the wider project team. Work from engineers/designers' mark ups to edit or produce accurate and structured models Develop a working knowledge of all HV/LV systems to ensure optimised solutions and enable CDM compliance. Visit site to gain practical experience of HV/LV installation practices and apply these to improve drawing effectiveness models. Does this sound like a role you have envisaged yourself in? What we're looking for: Demonstrable experience working in a design environment Knowledge of BS/ISO BIM standards and electrical engineering codes/regulations. Proficient in AutoCAD Revit MEP, and Navisworks Qualifications: ONC/HNC (or equivalent) in Electrical Engineering, Building Services, or related discipline Formal training or certification in Autodesk Revit MEP Good understanding of engineering drawing standards and BIM processes (ISO 19650 awareness) Why Join Us? At Freedom, we believe in attracting and retaining the best talent by offering great benefits and career progression opportunities, including: Pension with up to 8% employer contribution Private Medical Insurance Personal Wellbeing and Volunteer Days Salary Sacrifice Car Scheme (Hybrid/Electric Vehicle) Flexible benefits (e.g., Dental Insurance, Gym Memberships, Tax-Free Bikes) Ongoing Training & Development Programme Next Steps: As a business, we're on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We'll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be
Job Title: SSO Administrator Job Description The role's purpose is to operationally roll out, configure, and support broker access to the Broker Portal. This is achieved using CIAM (Single Sign-On via Azure AD B2C) for enterprise brokers and Magic Link with optional Multi-Factor Authentication for smaller brokers. This is a hands-on administration and broker-facing enablement role, rather than a software engineering or architecture role. Responsibilities Provision broker organisations and users in CIAM. Configure local and federated user accounts. Maintain Magic Link allow-lists, approved email domains, and MFA enrolment. Perform bulk user onboarding and migrations. Validate broker data against CRM records. Manage user flows, including sign-in, sign-up, and password reset. Administer identity providers and application registrations. Assign roles, groups, and access permissions. Execute Joiner / Mover / Leaver activities. Perform token and access validation testing. Issue, expire, and re-issue one-time access links. Support failed Magic Link and MFA login attempts. Enforce operational access controls and audit trails. Escalate suspected misuse to Security Operations. Essential Skills Experience with Identity and Access Management (IAM). Proficiency in CIAM and Single Sign-On (SSO). Knowledge of Azure Active Directory. Why Work Here? Join a dynamic team where you will have the opportunity to make a significant impact by enabling seamless broker access. Experience a supportive work culture that values innovation and professional development. Work Environment This position involves working hands-on in an administrative capacity. You will be using advanced technologies such as Azure AD B2C to ensure smooth broker operations. The role may require flexibility in working hours to accommodate operational needs. Location Manchester, UK Rate/Salary .00 GBP Daily Trading as TEKsystems. Allegis Group Limited, Maxis 2, Western Road, Bracknell, RG12 1RT, United Kingdom. No Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. TEKsystems is a company within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available at To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go to We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice at for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. If you are resident in the UK, EEA or Switzerland, we will process any access request you make in accordance with our commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield. JBRP1_UKTJ
Dec 15, 2025
Full time
Job Title: SSO Administrator Job Description The role's purpose is to operationally roll out, configure, and support broker access to the Broker Portal. This is achieved using CIAM (Single Sign-On via Azure AD B2C) for enterprise brokers and Magic Link with optional Multi-Factor Authentication for smaller brokers. This is a hands-on administration and broker-facing enablement role, rather than a software engineering or architecture role. Responsibilities Provision broker organisations and users in CIAM. Configure local and federated user accounts. Maintain Magic Link allow-lists, approved email domains, and MFA enrolment. Perform bulk user onboarding and migrations. Validate broker data against CRM records. Manage user flows, including sign-in, sign-up, and password reset. Administer identity providers and application registrations. Assign roles, groups, and access permissions. Execute Joiner / Mover / Leaver activities. Perform token and access validation testing. Issue, expire, and re-issue one-time access links. Support failed Magic Link and MFA login attempts. Enforce operational access controls and audit trails. Escalate suspected misuse to Security Operations. Essential Skills Experience with Identity and Access Management (IAM). Proficiency in CIAM and Single Sign-On (SSO). Knowledge of Azure Active Directory. Why Work Here? Join a dynamic team where you will have the opportunity to make a significant impact by enabling seamless broker access. Experience a supportive work culture that values innovation and professional development. Work Environment This position involves working hands-on in an administrative capacity. You will be using advanced technologies such as Azure AD B2C to ensure smooth broker operations. The role may require flexibility in working hours to accommodate operational needs. Location Manchester, UK Rate/Salary .00 GBP Daily Trading as TEKsystems. Allegis Group Limited, Maxis 2, Western Road, Bracknell, RG12 1RT, United Kingdom. No Allegis Group Limited operates as an Employment Business and Employment Agency as set out in the Conduct of Employment Agencies and Employment Businesses Regulations 2003. TEKsystems is a company within the Allegis Group network of companies (collectively referred to as "Allegis Group"). Aerotek, Aston Carter, EASi, Talentis Solutions, TEKsystems, Stamford Consultants and The Stamford Group are Allegis Group brands. If you apply, your personal data will be processed as described in the Allegis Group Online Privacy Notice available at To access our Online Privacy Notice, which explains what information we may collect, use, share, and store about you, and describes your rights and choices about this, please go to We are part of a global network of companies and as a result, the personal data you provide will be shared within Allegis Group and transferred and processed outside the UK, Switzerland and European Economic Area subject to the protections described in the Allegis Group Online Privacy Notice. We store personal data in the UK, EEA, Switzerland and the USA. If you would like to exercise your privacy rights, please visit the "Contacting Us" section of our Online Privacy Notice at for details on how to contact us. To protect your privacy and security, we may take steps to verify your identity, such as a password and user ID if there is an account associated with your request, or identifying information such as your address or date of birth, before proceeding with your request. If you are resident in the UK, EEA or Switzerland, we will process any access request you make in accordance with our commitments under the UK Data Protection Act, EU-U.S. Privacy Shield or the Swiss-U.S. Privacy Shield. JBRP1_UKTJ
Senior Software Engineer Term: 12-Month Contract, likely to extend Location: Gloucester - hybrid working, 3 days onsite per week Rate: £51.21 per hour, approximately £379 per day (Inside IR35, Umbrella) ? About the Role This is an excellent opportunity for a hands-on Senior Software Engineer with strong Python skills and some applied AI/ML experience to support the development and deployment of intelligent engineering solutions within a world-class aerospace and industrial environment. You will work as part of a growing team dedicated to improving engineering efficiency, automation, and digital capability. The role is practical, delivery-focused, and involves close collaboration with global AI teams in Canada and France as well as local engineering stakeholders in Gloucester. This is not a research or deep data science role - instead, you will apply software engineering fundamentals, support the integration and deployment of AI-based tools, and help uplift engineering capability through high-quality, scalable software. What You'll Be Doing Software Engineering & Technical Delivery Develop, deploy, and maintain software solutions that integrate AI/ML functionality. Build robust, high-quality Python applications used within engineering workflows. Contribute to the design and implementation of data pipelines and data storage solutions. Support troubleshooting, optimisation, and ongoing maintenance of AI-enabled systems. Lightweight AI/ML Integration Prototype and implement applied ML functions (e.g., classification, prediction, feature extraction) where needed. Integrate models developed by global AI/ML teams into production-ready engineering tools. Perform data preparation, analysis, and exploratory investigations to support engineering needs. Technical Leadership & Mentorship Provide guidance to junior engineers and apprentices at the Gloucester site. Uphold technical standards, coding best practices, and documentation quality. Influence design decisions and ensure reliability across software initiatives. Global Collaboration Work closely with AI/ML experts in Toronto and Paris, facilitating knowledge transfer and technical alignment. Help accelerate local projects by leveraging specialist expertise from international teams. Collaborate across business and IT to meet engineering objectives. Continuous Improvement Identify and champion improvements in tooling, processes, coding practices, and methodologies. Stay aware of emerging software engineering and AI technologies. Skills & Experience Required Core Technical Skills Strong Python development experience (required). Solid software engineering fundamentals: version control, testing, deployment CI/CD and lifecycle management troubleshooting and optimisation Experience working with databases, storage systems, and basic ETL workflows. Experience with AWS or another cloud environment (advantageous). Familiarity with ML frameworks or libraries (preferred but not essential). Experience Level 2-5 years in a commercial software engineering role preferred. Experience working in an engineering, industrial, or aerospace environment is a bonus. Soft Skills & Leadership Able to take a leading role in delivering technical projects. Confident mentoring junior team members. Strong communication and stakeholder engagement skills. Collaborative, autonomous, and proactive mindset. Why This Role Stands Out You will be working on real engineering challenges, not theoretical research. Opportunity to shape how intelligent tools support high-performance aerospace systems. Tight collaboration with global AI teams - excellent environment for career growth. A role that blends solid software engineering with exposure to modern AI practices. JBRP1_UKTJ
Dec 15, 2025
Full time
Senior Software Engineer Term: 12-Month Contract, likely to extend Location: Gloucester - hybrid working, 3 days onsite per week Rate: £51.21 per hour, approximately £379 per day (Inside IR35, Umbrella) ? About the Role This is an excellent opportunity for a hands-on Senior Software Engineer with strong Python skills and some applied AI/ML experience to support the development and deployment of intelligent engineering solutions within a world-class aerospace and industrial environment. You will work as part of a growing team dedicated to improving engineering efficiency, automation, and digital capability. The role is practical, delivery-focused, and involves close collaboration with global AI teams in Canada and France as well as local engineering stakeholders in Gloucester. This is not a research or deep data science role - instead, you will apply software engineering fundamentals, support the integration and deployment of AI-based tools, and help uplift engineering capability through high-quality, scalable software. What You'll Be Doing Software Engineering & Technical Delivery Develop, deploy, and maintain software solutions that integrate AI/ML functionality. Build robust, high-quality Python applications used within engineering workflows. Contribute to the design and implementation of data pipelines and data storage solutions. Support troubleshooting, optimisation, and ongoing maintenance of AI-enabled systems. Lightweight AI/ML Integration Prototype and implement applied ML functions (e.g., classification, prediction, feature extraction) where needed. Integrate models developed by global AI/ML teams into production-ready engineering tools. Perform data preparation, analysis, and exploratory investigations to support engineering needs. Technical Leadership & Mentorship Provide guidance to junior engineers and apprentices at the Gloucester site. Uphold technical standards, coding best practices, and documentation quality. Influence design decisions and ensure reliability across software initiatives. Global Collaboration Work closely with AI/ML experts in Toronto and Paris, facilitating knowledge transfer and technical alignment. Help accelerate local projects by leveraging specialist expertise from international teams. Collaborate across business and IT to meet engineering objectives. Continuous Improvement Identify and champion improvements in tooling, processes, coding practices, and methodologies. Stay aware of emerging software engineering and AI technologies. Skills & Experience Required Core Technical Skills Strong Python development experience (required). Solid software engineering fundamentals: version control, testing, deployment CI/CD and lifecycle management troubleshooting and optimisation Experience working with databases, storage systems, and basic ETL workflows. Experience with AWS or another cloud environment (advantageous). Familiarity with ML frameworks or libraries (preferred but not essential). Experience Level 2-5 years in a commercial software engineering role preferred. Experience working in an engineering, industrial, or aerospace environment is a bonus. Soft Skills & Leadership Able to take a leading role in delivering technical projects. Confident mentoring junior team members. Strong communication and stakeholder engagement skills. Collaborative, autonomous, and proactive mindset. Why This Role Stands Out You will be working on real engineering challenges, not theoretical research. Opportunity to shape how intelligent tools support high-performance aerospace systems. Tight collaboration with global AI teams - excellent environment for career growth. A role that blends solid software engineering with exposure to modern AI practices. JBRP1_UKTJ
For additional information, please review .Citi is a world-leading global bank. We have approximately 200 million customer accounts and a presence in more than 160 countries and jurisdictions worldwide. We provide consumers, corporations, governments, and institutions with a broad range of financial products and services, including consumer banking and credit, corporate and investment banking, securities brokerage, transaction services, and wealth management. We enable clients to achieve their strategic financial objectives by providing them with cutting-edge ideas, best-in-class products and solutions, and unparalleled access to capital and liquidity.Engineer the future of global finance. At Citi, our Tech team doesn't just support finance - we are helping to redefine it. Every day, $5 trillion crosses through our network. We do business in 180+ countries operating at a scale few can match. From deploying advanced AI to helping shape global markets, we build systems that matter. Look to join a team where your work helps influence economies, your ideas can drive innovation and outcomes, and your growth is backed by mentorship, continuous learning and flexibility with potential hybrid work opportunities. Help solve real-world challenges that touch millions and get the opportunity to build the future of finance with Citi Tech . The Production Management Global Support Lead is a Senior Manager position within SMBF Services Production Management, specifically for the Trade and Working Capital Solutions (TWCS) business area. This role is critical to the Services Client Experience, focusing on leading Global Production teams with a strong emphasis on continuous improvement and fostering a culture of highly resilient, engineering-led outcomes. The successful candidate will possess a deep understanding of Production management practices, including Operational, Resiliency & Recoverability, Change + Release Transition, Risk Management, SRE, and SDLC (Waterfall / Agile). The role also involves contributing to the broader Services and SMBF strategy, improvement initiatives, employee engagement, talent development, diversity, and inclusion. Key Responsibilities Stability & Resiliency: Maintain high levels of stability, resiliency, and prevention for TWCS services, actively participating in and guiding incident recovery. Collaboration: Work with senior management across technology, operations, and business teams to develop actionable outcomes for Production. Change Readiness: Ensure high standards for Production Change Readiness and control adherence, prioritizing supportability, sustainability, and resiliency for technical changes. Technical Leadership: Drive the adoption of standard production tools for TWCS applications, focusing on monitoring, observability, capacity, resiliency, recoverability, and automation improvements. Workload Management: Proactively assess and manage dominant L1, L2, and L3 workload drivers, identify emerging trends, and devise plans to improve efficiency and service levels. Automation & GenAI: Minimize human intervention by leveraging Generative AI and Automation capabilities, prioritizing development/product opportunities. SLA & Performance: Implement strong SLA/Performance measurement, analyse production insights, identify trends, and set clear goals for improvement. Business Acumen: Develop and maintain a strong understanding of Trade & Working Capital Solutions product functionality and business requirements. Stakeholder Influence: Collaborate and influence senior leaders on stability and operational topics both internally and externally. People Management: Manage and develop talent, conduct performance evaluations, and oversee reward & recognition. Vendor Management: Engage with vendors and partners to achieve high service levels. Budget & Staffing: Manage the TWCS Production budget and staffing, making commercially minded decisions to optimize Total Cost of Ownership (TCO). Risk Management: Appropriately assess and manage risk, ensuring compliance with laws, regulations, and policies, applying sound ethical judgment, and transparently escalating/reporting control issues. Required Experience & Skills Experience: Extensive industry-relevant experience, highly experienced in various Production Management disciplines with a track record of continual improvement. Communication & Influence: Excellent interpersonal and communication skills, with the ability to influence and garner support from senior stakeholders and partners. Comfortable presenting issues, initiatives, and progress in various forums, and adept at distilling complex information into succinct messages. Quality & Problem Solving: Demonstrable commitment to quality, attention to detail, critical thinking, and problem-solving skills. Organizational Navigation: Highly effective at navigating complex organizations. Financial Acumen: Strong financial planning and cost discipline. Team Leadership: Exceptional staff engagement and talent development. Technical Proficiency: Experience managing distributed teams and familiarity with relevant technologies, including relational and NoSQL databases, middleware, programming languages, and operating systems. Cloud & Microservices: Experience/knowledge with supporting applications deployed as microservices on Cloud Environments. Innovation: Proven track record of keeping abreast of emerging industry and technological advances. What we'll provide you: By joining Citi, you will not only be part of a business casual workplace with a hybrid working model (up to 2 days working at home per week), but also receive a competitive base salary (which is annually reviewed), and enjoy a whole host of additional benefits such as: 27 days annual leave (plus bank holidays) A discretional annual performance related bonus Private Medical Care & Life Insurance Employee Assistance Program Pension Plan Paid Parental Leave Special discounts for employees, family, and friends Access to an array of learning and development resourcesAlongside these benefits Citi is committed to ensuring our workplace is where everyone feels comfortable coming to work as their whole self, every day. We want the best talent around the world to be energized to join us, motivated to stay and empowered to thrive. Job Family Group: Technology Job Family: Applications Support Time Type: Full time Most Relevant Skills Please see the requirements listed above. Other Relevant Skills For complementary skills, please see above and/or contact the recruiter. Citi is an equal opportunity employer, and qualified candidates will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other characteristic protected by law. If you are a person with a disability and need a reasonable accommodation to use our search tools and/or apply for a career opportunity review . View Citi's and the poster.
Dec 15, 2025
Full time
For additional information, please review .Citi is a world-leading global bank. We have approximately 200 million customer accounts and a presence in more than 160 countries and jurisdictions worldwide. We provide consumers, corporations, governments, and institutions with a broad range of financial products and services, including consumer banking and credit, corporate and investment banking, securities brokerage, transaction services, and wealth management. We enable clients to achieve their strategic financial objectives by providing them with cutting-edge ideas, best-in-class products and solutions, and unparalleled access to capital and liquidity.Engineer the future of global finance. At Citi, our Tech team doesn't just support finance - we are helping to redefine it. Every day, $5 trillion crosses through our network. We do business in 180+ countries operating at a scale few can match. From deploying advanced AI to helping shape global markets, we build systems that matter. Look to join a team where your work helps influence economies, your ideas can drive innovation and outcomes, and your growth is backed by mentorship, continuous learning and flexibility with potential hybrid work opportunities. Help solve real-world challenges that touch millions and get the opportunity to build the future of finance with Citi Tech . The Production Management Global Support Lead is a Senior Manager position within SMBF Services Production Management, specifically for the Trade and Working Capital Solutions (TWCS) business area. This role is critical to the Services Client Experience, focusing on leading Global Production teams with a strong emphasis on continuous improvement and fostering a culture of highly resilient, engineering-led outcomes. The successful candidate will possess a deep understanding of Production management practices, including Operational, Resiliency & Recoverability, Change + Release Transition, Risk Management, SRE, and SDLC (Waterfall / Agile). The role also involves contributing to the broader Services and SMBF strategy, improvement initiatives, employee engagement, talent development, diversity, and inclusion. Key Responsibilities Stability & Resiliency: Maintain high levels of stability, resiliency, and prevention for TWCS services, actively participating in and guiding incident recovery. Collaboration: Work with senior management across technology, operations, and business teams to develop actionable outcomes for Production. Change Readiness: Ensure high standards for Production Change Readiness and control adherence, prioritizing supportability, sustainability, and resiliency for technical changes. Technical Leadership: Drive the adoption of standard production tools for TWCS applications, focusing on monitoring, observability, capacity, resiliency, recoverability, and automation improvements. Workload Management: Proactively assess and manage dominant L1, L2, and L3 workload drivers, identify emerging trends, and devise plans to improve efficiency and service levels. Automation & GenAI: Minimize human intervention by leveraging Generative AI and Automation capabilities, prioritizing development/product opportunities. SLA & Performance: Implement strong SLA/Performance measurement, analyse production insights, identify trends, and set clear goals for improvement. Business Acumen: Develop and maintain a strong understanding of Trade & Working Capital Solutions product functionality and business requirements. Stakeholder Influence: Collaborate and influence senior leaders on stability and operational topics both internally and externally. People Management: Manage and develop talent, conduct performance evaluations, and oversee reward & recognition. Vendor Management: Engage with vendors and partners to achieve high service levels. Budget & Staffing: Manage the TWCS Production budget and staffing, making commercially minded decisions to optimize Total Cost of Ownership (TCO). Risk Management: Appropriately assess and manage risk, ensuring compliance with laws, regulations, and policies, applying sound ethical judgment, and transparently escalating/reporting control issues. Required Experience & Skills Experience: Extensive industry-relevant experience, highly experienced in various Production Management disciplines with a track record of continual improvement. Communication & Influence: Excellent interpersonal and communication skills, with the ability to influence and garner support from senior stakeholders and partners. Comfortable presenting issues, initiatives, and progress in various forums, and adept at distilling complex information into succinct messages. Quality & Problem Solving: Demonstrable commitment to quality, attention to detail, critical thinking, and problem-solving skills. Organizational Navigation: Highly effective at navigating complex organizations. Financial Acumen: Strong financial planning and cost discipline. Team Leadership: Exceptional staff engagement and talent development. Technical Proficiency: Experience managing distributed teams and familiarity with relevant technologies, including relational and NoSQL databases, middleware, programming languages, and operating systems. Cloud & Microservices: Experience/knowledge with supporting applications deployed as microservices on Cloud Environments. Innovation: Proven track record of keeping abreast of emerging industry and technological advances. What we'll provide you: By joining Citi, you will not only be part of a business casual workplace with a hybrid working model (up to 2 days working at home per week), but also receive a competitive base salary (which is annually reviewed), and enjoy a whole host of additional benefits such as: 27 days annual leave (plus bank holidays) A discretional annual performance related bonus Private Medical Care & Life Insurance Employee Assistance Program Pension Plan Paid Parental Leave Special discounts for employees, family, and friends Access to an array of learning and development resourcesAlongside these benefits Citi is committed to ensuring our workplace is where everyone feels comfortable coming to work as their whole self, every day. We want the best talent around the world to be energized to join us, motivated to stay and empowered to thrive. Job Family Group: Technology Job Family: Applications Support Time Type: Full time Most Relevant Skills Please see the requirements listed above. Other Relevant Skills For complementary skills, please see above and/or contact the recruiter. Citi is an equal opportunity employer, and qualified candidates will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other characteristic protected by law. If you are a person with a disability and need a reasonable accommodation to use our search tools and/or apply for a career opportunity review . View Citi's and the poster.
Job Title: Electrical,control and Instrumentation technician Location: Damhead Creek Power Station, Hoo, Rochester Contract Type: Permanent Salary: £45,000-£50,000 Benefits: Pension, Private Medical, Incentive plan, 25 Holidays About Our Client Our client is a leading power company operating in the UK, Ireland and Germany. They tackle the big, systemic challenges in the energy transition. They bring together expertise in trading, operations and engineering to identify and anticipate challenges that will emerge as the energy transition unfolds. They then act to solve them. Today, their portfolio includes reliable thermal power, battery storage and carbon capture projects. Together, these assets deliver decarbonised, dispatchable, and flexible power generation to meet the needs of millions of homes and businesses. The Role Are you an experienced EC&I Technician ready to make a tangible impact at a major UK energy generation site? Join our client as they continue to evolve and support their Electrical, Control & Instrumentation systems across the fleet. We're looking for an EC&I Technician with strong technical skills and experience in CCGT or large-scale process industries. This is a key role within their engineering function, supporting critical infrastructure and contributing to strategic projects. Key Responsibilities Ensure high standards of housekeeping and safety. Comply with statutory requirements, including Health & Safety at Work Act and Environmental Protection Act. Prepare and manage contracts in support of station operations. Act as Competent Person or Authorised Person under Safety Rules, ensuring safety from the system. Deliver service and maintenance best practices. Supervise contractors and personnel during plant overhauls. Apply a proactive and creative approach to fault diagnosis and problem solving. Support and deliver Process Safety KPIs. Contribute to business and station objectives. Assist in budget and cost management. Undertake procurement activities, including technical specification development. Participate in major and interim inspections and overhauls, managing contracts and contractors. Perform hands-on maintenance on EC&I equipment and systems. Maintain effective interfaces with suppliers, contractors, and other stakeholders. Communicate clearly and concisely, including producing written reports. What We're Looking For Experience in CCGT plant maintenance or large-scale process industry. HNC qualification. Computer literacy. Working knowledge of health, safety, and environmental legislation. IOSH Managing Safely qualification (desirable). Strong team working skills. Knowledge of budgets and contract management. Understanding of safe working principles and relevant legislation. Results-driven with a desire to develop professionally. Self-motivated and flexible. Ability to support mechanical disciplines with planning and diagnostics. Why Join Our Client? Known for their ability to think and act fast using energy intelligence, their mission is to enable the energy transition by providing the power we need today and tomorrow. Whether you're an experienced professional or looking to grow, our client provides structured development pathways. They offer competitive salary, pension scheme, PMI (private medical insurance), long-term incentive plan and holiday starting at 25 days plus bank holidays. Ready to Apply? If you are looking for a new challenge within a dynamic and forward-thinking organisation, we want to hear from you! Apply today and help shape the future of power generation. Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants. JBRP1_UKTJ
Dec 15, 2025
Full time
Job Title: Electrical,control and Instrumentation technician Location: Damhead Creek Power Station, Hoo, Rochester Contract Type: Permanent Salary: £45,000-£50,000 Benefits: Pension, Private Medical, Incentive plan, 25 Holidays About Our Client Our client is a leading power company operating in the UK, Ireland and Germany. They tackle the big, systemic challenges in the energy transition. They bring together expertise in trading, operations and engineering to identify and anticipate challenges that will emerge as the energy transition unfolds. They then act to solve them. Today, their portfolio includes reliable thermal power, battery storage and carbon capture projects. Together, these assets deliver decarbonised, dispatchable, and flexible power generation to meet the needs of millions of homes and businesses. The Role Are you an experienced EC&I Technician ready to make a tangible impact at a major UK energy generation site? Join our client as they continue to evolve and support their Electrical, Control & Instrumentation systems across the fleet. We're looking for an EC&I Technician with strong technical skills and experience in CCGT or large-scale process industries. This is a key role within their engineering function, supporting critical infrastructure and contributing to strategic projects. Key Responsibilities Ensure high standards of housekeeping and safety. Comply with statutory requirements, including Health & Safety at Work Act and Environmental Protection Act. Prepare and manage contracts in support of station operations. Act as Competent Person or Authorised Person under Safety Rules, ensuring safety from the system. Deliver service and maintenance best practices. Supervise contractors and personnel during plant overhauls. Apply a proactive and creative approach to fault diagnosis and problem solving. Support and deliver Process Safety KPIs. Contribute to business and station objectives. Assist in budget and cost management. Undertake procurement activities, including technical specification development. Participate in major and interim inspections and overhauls, managing contracts and contractors. Perform hands-on maintenance on EC&I equipment and systems. Maintain effective interfaces with suppliers, contractors, and other stakeholders. Communicate clearly and concisely, including producing written reports. What We're Looking For Experience in CCGT plant maintenance or large-scale process industry. HNC qualification. Computer literacy. Working knowledge of health, safety, and environmental legislation. IOSH Managing Safely qualification (desirable). Strong team working skills. Knowledge of budgets and contract management. Understanding of safe working principles and relevant legislation. Results-driven with a desire to develop professionally. Self-motivated and flexible. Ability to support mechanical disciplines with planning and diagnostics. Why Join Our Client? Known for their ability to think and act fast using energy intelligence, their mission is to enable the energy transition by providing the power we need today and tomorrow. Whether you're an experienced professional or looking to grow, our client provides structured development pathways. They offer competitive salary, pension scheme, PMI (private medical insurance), long-term incentive plan and holiday starting at 25 days plus bank holidays. Ready to Apply? If you are looking for a new challenge within a dynamic and forward-thinking organisation, we want to hear from you! Apply today and help shape the future of power generation. Rullion celebrates and supports diversity and is committed to ensuring equal opportunities for both employees and applicants. JBRP1_UKTJ
Our people at JLL and JLL Technologies are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether youve got deep experience in commercial real estate, skilled trades or technology, or youre looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Covering a site in Maidenhead with a secondary site in Sittingbourne, Kent. Role summary: Electrical Engineer to work with the Account Manager and support clients facilities teams, carry out daily checks of all assets across the sites, completing PPM, Reactive tasks, compelling reports, managing contractors, Permits, RAMS, HSE & and providing engineering knowledge to the team. The role is currently for a full-time engineer to manage 3 sites at two locations travelling between sites via a vehicle provided. Day to day duties for this role include but are not limited to. To complete all PPMs within SLA. Carry out reactive task. Operate all systems within the facility in a competent, effective and efficient manner. The control of all activities relating to the technical and efficient operation of the installed building systems including all MEP assets and compliance with statutory regulations. Willingness to work flexible schedules, including extended or non-standard hours, to ensure optimal service delivery and client satisfaction. Attend weekly operations meetings, client meetings as requested within a professional, effective manner. Manage the clients CAFM systems, keeping within green SLAs & KPIs, ensure updates are added and with sufficient data. To assist the Account Manager in completing the Monthly and Quarterly Engineering Report ensuring that significant events or activities are noted. Ensure the asset database is correct and up to date. Management of onsite critical spares including maintaining site stock register and monthly auditing. Compilation of incident & near miss reporting and after-action reviews for any critical incident. Ensure all operational issues are brought to the Account Managers & Customers attention and provide all relevant reports with recommendations. Proactively promote a Safety First culture in line with the JLL Cardinal Rules of Safety are adhered to. Act as Primary point of contact for all engineering related matters from the client teams. Ensure that the Contract efficiently meets all the relevant KPI & SLA requirements. Taking ownership of the clients needs and purse good communications with the customer in order to build a stable relationship. Always carry out the works requested in a professional and proactive manner. To communicate clearly and effectively with your manager and clients always. Proactively assisting the management team to produce quotations by giving accurate and good quality information where extra works are identified. To provide accurate time sheet information weekly and on time. To ensure that the Company is always presented in a good light. To escalate any major site issues or incidents to your line manager asap once noticed. Essential skills, knowledge, and experience: C&G Level 2 and 3 Diploma Electrical Installation C&G 2360 Parts 1 & 2 or 2330 Levels 2 & 3 Test & Inspection 18th edition certificate Basic plumbing skills Strong Electrical & Mechanical Maintenance experience Knowledge of heating and air conditioning systems Knowledge of building fabric and experience in carrying out basic fabric reactive repairs when required. Sound understanding and experience of meeting Health & Safety obligations with regards to maintenance activities. Have good communication and organisation skills. Have a positive can do attitude. Ability to work on own or as part of a team JBRP1_UKTJ
Dec 15, 2025
Full time
Our people at JLL and JLL Technologies are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether youve got deep experience in commercial real estate, skilled trades or technology, or youre looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Covering a site in Maidenhead with a secondary site in Sittingbourne, Kent. Role summary: Electrical Engineer to work with the Account Manager and support clients facilities teams, carry out daily checks of all assets across the sites, completing PPM, Reactive tasks, compelling reports, managing contractors, Permits, RAMS, HSE & and providing engineering knowledge to the team. The role is currently for a full-time engineer to manage 3 sites at two locations travelling between sites via a vehicle provided. Day to day duties for this role include but are not limited to. To complete all PPMs within SLA. Carry out reactive task. Operate all systems within the facility in a competent, effective and efficient manner. The control of all activities relating to the technical and efficient operation of the installed building systems including all MEP assets and compliance with statutory regulations. Willingness to work flexible schedules, including extended or non-standard hours, to ensure optimal service delivery and client satisfaction. Attend weekly operations meetings, client meetings as requested within a professional, effective manner. Manage the clients CAFM systems, keeping within green SLAs & KPIs, ensure updates are added and with sufficient data. To assist the Account Manager in completing the Monthly and Quarterly Engineering Report ensuring that significant events or activities are noted. Ensure the asset database is correct and up to date. Management of onsite critical spares including maintaining site stock register and monthly auditing. Compilation of incident & near miss reporting and after-action reviews for any critical incident. Ensure all operational issues are brought to the Account Managers & Customers attention and provide all relevant reports with recommendations. Proactively promote a Safety First culture in line with the JLL Cardinal Rules of Safety are adhered to. Act as Primary point of contact for all engineering related matters from the client teams. Ensure that the Contract efficiently meets all the relevant KPI & SLA requirements. Taking ownership of the clients needs and purse good communications with the customer in order to build a stable relationship. Always carry out the works requested in a professional and proactive manner. To communicate clearly and effectively with your manager and clients always. Proactively assisting the management team to produce quotations by giving accurate and good quality information where extra works are identified. To provide accurate time sheet information weekly and on time. To ensure that the Company is always presented in a good light. To escalate any major site issues or incidents to your line manager asap once noticed. Essential skills, knowledge, and experience: C&G Level 2 and 3 Diploma Electrical Installation C&G 2360 Parts 1 & 2 or 2330 Levels 2 & 3 Test & Inspection 18th edition certificate Basic plumbing skills Strong Electrical & Mechanical Maintenance experience Knowledge of heating and air conditioning systems Knowledge of building fabric and experience in carrying out basic fabric reactive repairs when required. Sound understanding and experience of meeting Health & Safety obligations with regards to maintenance activities. Have good communication and organisation skills. Have a positive can do attitude. Ability to work on own or as part of a team JBRP1_UKTJ
