• Home
  • Search Jobs
  • Register CV
  • Post a Job
  • Employer Pricing
  • Contact Us
  • Sign in
  • Sign up
  • Home
  • Search Jobs
  • Register CV
  • Post a Job
  • Employer Pricing
  • Contact Us
Sorry, that job is no longer available. Here are some results that may be similar to the job you were looking for.

1071 jobs found

Email me jobs like this
Refine Search
Current Search
data engineer
Penguin Recruitment Ltd
Senior/Principal Fire Engineer
Penguin Recruitment Ltd
Senior Fire Engineer / Principal Fire Engineer Location: Reading, UK (Hybrid / Fully Remote) Salary: Competitive, dependent on experience Job Type: Full-time, Permanent About the Opportunity An established multidisciplinary engineering consultancy specialising in engineering and fire safety solutions is seeking an experienced Senior fire engineer or Principal Fire Engineer. Working across data centres, industrial facilities, commercial buildings and critical infrastructure, the successful candidate will lead fire strategies, fire risk assessments and technical engineering projects. Key Responsibilities Fire Engineering and Strategies Lead fire strategy development for new-build, refurbishment and existing-building projects. Deliver prescriptive and performance-based solutions in line with BS 9999, BS 9991, BS 7974 and Approved Document B. Assess means of escape, compartmentation, fire resistance, smoke control and evacuation arrangements. Prepare fire strategy reports and technical assessments. Review architectural, structural and MEP designs throughout project delivery. Fire Risk Assessments and Protection Lead FRAs across commercial, industrial, data centre and complex facilities. Assess risks associated with generators, electrical plant, fuel systems and battery energy storage. Review fire precautions and advise on compliance with relevant legislation, including the Regulatory Reform (Fire Safety) Order 2005. Review active fire protection systems, including sprinklers, water mist, gaseous suppression, AOVs and smoke control. Review fire alarm Cause & Effect matrices, contractor submissions and technical designs. Undertake or review fire modelling, smoke movement and evacuation assessments. Project Management and Leadership Lead projects, managing technical quality, budgets, programmes and deliverables. Liaise with clients, Building Control, fire authorities and multidisciplinary teams. Review technical reports, lead meetings and mentor junior engineers. Support tenders, fee proposals and business development. Requirements Essential Degree in Fire Engineering, Fire Safety Engineering, Mechanical Engineering or a related discipline. 7+ years' experience for Senior level or 10+ years for Principal level. Proven experience delivering fire strategies and fire risk assessments. Strong knowledge of UK Building Regulations, Approved Document B, BS 9999, BS 9991 and BS 7974. Experience with active and passive fire protection systems and smoke ventilation. Excellent technical reporting, project management and communication skills. Desirable CEng, MIFireE or equivalent professional membership, or working towards Chartership. Fire risk assessor certification or registration. Experience in data centres, industrial facilities, power generation or critical infrastructure. Familiarity with FDS, PyroSim, CFAST, Revit or AutoCAD. Knowledge of NFPA and FM Global standards. What Is on Offer? Competitive salary. 25 days annual leave plus bank holidays and birthday leave. Company pension. Flexible hybrid or fully remote working. Professional development and Chartership support. Exposure to challenging UK and international projects. Career progression into technical leadership. Supportive team environment, social events and discretionary bonuses. How to Apply If you are an experienced Senior fire engineer or Principal Fire Engineer looking for your next opportunity, please submit your CV and covering letter through the recruitment contact handling this vacancy. The organisation is an equal opportunities employer and welcomes applications from suitably qualified candidates.
Nov 22, 2026
Full time
Senior Fire Engineer / Principal Fire Engineer Location: Reading, UK (Hybrid / Fully Remote) Salary: Competitive, dependent on experience Job Type: Full-time, Permanent About the Opportunity An established multidisciplinary engineering consultancy specialising in engineering and fire safety solutions is seeking an experienced Senior fire engineer or Principal Fire Engineer. Working across data centres, industrial facilities, commercial buildings and critical infrastructure, the successful candidate will lead fire strategies, fire risk assessments and technical engineering projects. Key Responsibilities Fire Engineering and Strategies Lead fire strategy development for new-build, refurbishment and existing-building projects. Deliver prescriptive and performance-based solutions in line with BS 9999, BS 9991, BS 7974 and Approved Document B. Assess means of escape, compartmentation, fire resistance, smoke control and evacuation arrangements. Prepare fire strategy reports and technical assessments. Review architectural, structural and MEP designs throughout project delivery. Fire Risk Assessments and Protection Lead FRAs across commercial, industrial, data centre and complex facilities. Assess risks associated with generators, electrical plant, fuel systems and battery energy storage. Review fire precautions and advise on compliance with relevant legislation, including the Regulatory Reform (Fire Safety) Order 2005. Review active fire protection systems, including sprinklers, water mist, gaseous suppression, AOVs and smoke control. Review fire alarm Cause & Effect matrices, contractor submissions and technical designs. Undertake or review fire modelling, smoke movement and evacuation assessments. Project Management and Leadership Lead projects, managing technical quality, budgets, programmes and deliverables. Liaise with clients, Building Control, fire authorities and multidisciplinary teams. Review technical reports, lead meetings and mentor junior engineers. Support tenders, fee proposals and business development. Requirements Essential Degree in Fire Engineering, Fire Safety Engineering, Mechanical Engineering or a related discipline. 7+ years' experience for Senior level or 10+ years for Principal level. Proven experience delivering fire strategies and fire risk assessments. Strong knowledge of UK Building Regulations, Approved Document B, BS 9999, BS 9991 and BS 7974. Experience with active and passive fire protection systems and smoke ventilation. Excellent technical reporting, project management and communication skills. Desirable CEng, MIFireE or equivalent professional membership, or working towards Chartership. Fire risk assessor certification or registration. Experience in data centres, industrial facilities, power generation or critical infrastructure. Familiarity with FDS, PyroSim, CFAST, Revit or AutoCAD. Knowledge of NFPA and FM Global standards. What Is on Offer? Competitive salary. 25 days annual leave plus bank holidays and birthday leave. Company pension. Flexible hybrid or fully remote working. Professional development and Chartership support. Exposure to challenging UK and international projects. Career progression into technical leadership. Supportive team environment, social events and discretionary bonuses. How to Apply If you are an experienced Senior fire engineer or Principal Fire Engineer looking for your next opportunity, please submit your CV and covering letter through the recruitment contact handling this vacancy. The organisation is an equal opportunities employer and welcomes applications from suitably qualified candidates.
Muller UK & Ireland
Automation Support Engineer
Muller UK & Ireland Bridgwater, Somerset
Ready to Rise to the Top? Our Electrical & Automation Support Engineer is a key site-based role where you'll combine your electrical engineering expertise with automation and controls knowledge to improve asset reliability, reduce downtime and develop our automation capability. How You'll Make an Impact You'll work across reactive support, continuous improvement and site projects, giving you the opportunity to get involved with everything from PLC fault-finding and SCADA systems to automation upgrades and reliability improvements. What you'll be doing: Providing specialist electrical and automation support, including breakdown fault-finding and structured problem-solving. Identifying and delivering improvements that increase reliability, efficiency and equipment performance. Supporting minor automation CAPEX projects and wider site projects involving controls and automation linked with obsolescence and new technology. Working with Siemens S7 and Allen-Bradley PLC systems, SCADA and INTOUCH applications. Supporting industrial networks, electrical panels, controls and automation infrastructure. Maintaining automation documentation, software version control and site standards. Supporting automation health checks, panel risk assessments and obsolescence plans. Using performance data to identify opportunities to improve production efficiency, quality and reliability. What You'll Bring An Electrical or Mechanical Engineering qualification, ideally alongside a recognised apprenticeship. A strong electrical bias with hands-on fault-finding experience. Experience diagnosing faults within electrical panels and during breakdown situations. Knowledge of Siemens S7 and Allen-Bradley PLC programming. Understanding of industrial networking. A practical, improvement-focused approach to engineering. No Hard Graft Goes Unnoticed You'll benefit from a competitive reward package including: Annual pay reviews Bonus scheme of up to 10% 23 days' annual leave, increasing with service Option to buy and sell up to 5 days' annual leave Private medical healthcare (single) Pension scheme Life assurance Enhanced maternity, paternity and family leave policies Enhanced bereavement policy Employee Assistance Programme Access to our employee discount platform, offering discounts across hundreds of retailers online and in-storeOp Pour in the Passion. Love the Result. If you an electrically biased engineer with a passion for automation, problem-solving and making machinery perform at its best whilst being the subject matter expert, we'd love to hear from you. Whether this is a career move you've been working towards or an opportunity you've discovered along the way, this could be your next step. For a full Job Description or any informal queries, please contact Kirsty Lewis, TA Partner - You can find out more about Müller and what it's like to work for us by clicking here Careers at Müller UK & Ireland
Nov 22, 2026
Full time
Ready to Rise to the Top? Our Electrical & Automation Support Engineer is a key site-based role where you'll combine your electrical engineering expertise with automation and controls knowledge to improve asset reliability, reduce downtime and develop our automation capability. How You'll Make an Impact You'll work across reactive support, continuous improvement and site projects, giving you the opportunity to get involved with everything from PLC fault-finding and SCADA systems to automation upgrades and reliability improvements. What you'll be doing: Providing specialist electrical and automation support, including breakdown fault-finding and structured problem-solving. Identifying and delivering improvements that increase reliability, efficiency and equipment performance. Supporting minor automation CAPEX projects and wider site projects involving controls and automation linked with obsolescence and new technology. Working with Siemens S7 and Allen-Bradley PLC systems, SCADA and INTOUCH applications. Supporting industrial networks, electrical panels, controls and automation infrastructure. Maintaining automation documentation, software version control and site standards. Supporting automation health checks, panel risk assessments and obsolescence plans. Using performance data to identify opportunities to improve production efficiency, quality and reliability. What You'll Bring An Electrical or Mechanical Engineering qualification, ideally alongside a recognised apprenticeship. A strong electrical bias with hands-on fault-finding experience. Experience diagnosing faults within electrical panels and during breakdown situations. Knowledge of Siemens S7 and Allen-Bradley PLC programming. Understanding of industrial networking. A practical, improvement-focused approach to engineering. No Hard Graft Goes Unnoticed You'll benefit from a competitive reward package including: Annual pay reviews Bonus scheme of up to 10% 23 days' annual leave, increasing with service Option to buy and sell up to 5 days' annual leave Private medical healthcare (single) Pension scheme Life assurance Enhanced maternity, paternity and family leave policies Enhanced bereavement policy Employee Assistance Programme Access to our employee discount platform, offering discounts across hundreds of retailers online and in-storeOp Pour in the Passion. Love the Result. If you an electrically biased engineer with a passion for automation, problem-solving and making machinery perform at its best whilst being the subject matter expert, we'd love to hear from you. Whether this is a career move you've been working towards or an opportunity you've discovered along the way, this could be your next step. For a full Job Description or any informal queries, please contact Kirsty Lewis, TA Partner - You can find out more about Müller and what it's like to work for us by clicking here Careers at Müller UK & Ireland
SOUTHERN WATER
Engineering - Graduate Development Programme
SOUTHERN WATER Brighton, Sussex
Graduate Development Programme - Engineering Location: Falmer, West Sussex - Hybrid Approach Travel: Regular travel across our region, including to operational sites, will be required Contract: Permanent Hours: 37 hours, Monday-Friday Salary: £37,000 per year Put your technical knowledge to work on infrastructure that matters. Water is essential to everyday life. Our engineers help us manage, improve and develop the infrastructure that keeps water and wastewater services moving across the South East. Our Engineering Graduate Development Programme gives you the opportunity to move beyond the classroom and apply your knowledge to real engineering challenges. You'll learn alongside experienced professionals, build your technical capability and see how engineering decisions affect customers, communities and the environment. Pathways may include Wastewater Process Engineering For graduates from Chemical Engineering. Network Modelling Open to graduates from numerical and analytical subjects such as Mathematics, Statistics, Geography and Environmental Science, alongside relevant technical disciplines. Asset Integration Engineering backgrounds are welcomed, although an Engineering degree is not essential for this pathway. Ecologist Ideal for graduates from Environmental Science, Biology, Biological Sciences, Ecology or a related environmental discipline. Environmental Advisor Ideal for graduates from Environmental Science, Biology, Biological Sciences or a related environmental discipline. Build your engineering career You'll gain a broad understanding of our water and wastewater operations. You'll grow your confidence, take responsibility for meaningful work, and gain exposure that many people wait years to access. You'll receive: - Meaningful responsibility from day one, supported by experienced mentors and placement managers - Coaching and guidance from operational colleagues and leaders - Opportunities to contribute to projects early in the programme - Access to: industry-recognised development, professional memberships, and soft-skills development programme to accelerate their professional development - Support and encouragement towards achieving Chartered status with a recognised professional institution. - A strong graduate cohort community and a supportive network across the business - Opportunities to take part in community projects and regional events Travel requirements & how we support you Our placements involve travel across regions, so you'll need a full UK driving licence and access to a car. To support this, we reimburse business mileage for any travel beyond your normal home to base commute, in line with our Travel & Expenses Policy (e.g., mileage is claimable after deducting home to base allowance). You'll receive guidance on claiming expenses, a Permit to Drive where required, and practical support to help you travel confidently and safely between sites. What's in it for you • Relocation support available, so distance doesn't have to be a barrier to starting your career with us. • Health and wellbeing support, including access to a health cash plan and employee assistance programme. • Flexible working options, supporting a healthy balance between work and life. • 28 days' annual leave, plus bank holidays. • Two paid volunteering days each year, giving you the opportunity to make a positive impact in your local community. • Employee discounts and benefits platform, helping your money go further. • Payment of professional institution membership fees. Who we're looking for We welcome graduates from all technical degree disciplines. What matters most is your curiosity, your willingness to learn, and your commitment to making a positive impact. You'll need: - Meng in an Engineering, Environmental or numerate science related subject. - Access to a car and a full UK driving licence by the programme start date - Flexibility to travel across Hampshire, Sussex, Kent and the Isle of Wight - You must have the right to work in the UK What you'll develop Depending on your pathway, you'll gain experience in areas such as: • Engineering and technical problem-solving • Asset and infrastructure management • Project delivery • Site and operational environments • Data and technical analysis • Safety, environmental and regulatory considerations • Working across multidisciplinary teams What happens next? • Applications are scheduled to close on 11 January 2027. We reserve the right to close the vacancy earlier if we receive a high volume of suitable applications, so we encourage you to apply early. • After submitting your application, you'll be invited to complete an online skills assessment and online interview as the next stage of the recruitment process. • Successful candidates will then be invited to an online assessment centre in February 2027. • The programme will start in September 2027. Interested in more than one graduate opportunity? You don't need to submit multiple applications. As part of the recruitment process, we'll give you the opportunity to tell us about other graduate roles or pathways you're interested in. Apply for the opportunity that best matches your interests and experience, and you'll have the chance to share your other preferences with us during the process. Ready to get started? If you're curious, collaborative and ready to learn, we'd love to hear from you. Help us build a better future for the South East. Apply now to join our Engineering Graduate Development Programme and take your first steps into a purpose-led career with real impact. Need flexibility in your work? Does this opportunity excite you but you're not 100% sure you meet all the requirements? Or are you concerned that standard working arrangements may not work with your personal circumstances? Whilst we can't accommodate every flexible working request, we'll try to find a practical solution. We encourage you to speak to us about what might work.
Nov 22, 2026
Full time
Graduate Development Programme - Engineering Location: Falmer, West Sussex - Hybrid Approach Travel: Regular travel across our region, including to operational sites, will be required Contract: Permanent Hours: 37 hours, Monday-Friday Salary: £37,000 per year Put your technical knowledge to work on infrastructure that matters. Water is essential to everyday life. Our engineers help us manage, improve and develop the infrastructure that keeps water and wastewater services moving across the South East. Our Engineering Graduate Development Programme gives you the opportunity to move beyond the classroom and apply your knowledge to real engineering challenges. You'll learn alongside experienced professionals, build your technical capability and see how engineering decisions affect customers, communities and the environment. Pathways may include Wastewater Process Engineering For graduates from Chemical Engineering. Network Modelling Open to graduates from numerical and analytical subjects such as Mathematics, Statistics, Geography and Environmental Science, alongside relevant technical disciplines. Asset Integration Engineering backgrounds are welcomed, although an Engineering degree is not essential for this pathway. Ecologist Ideal for graduates from Environmental Science, Biology, Biological Sciences, Ecology or a related environmental discipline. Environmental Advisor Ideal for graduates from Environmental Science, Biology, Biological Sciences or a related environmental discipline. Build your engineering career You'll gain a broad understanding of our water and wastewater operations. You'll grow your confidence, take responsibility for meaningful work, and gain exposure that many people wait years to access. You'll receive: - Meaningful responsibility from day one, supported by experienced mentors and placement managers - Coaching and guidance from operational colleagues and leaders - Opportunities to contribute to projects early in the programme - Access to: industry-recognised development, professional memberships, and soft-skills development programme to accelerate their professional development - Support and encouragement towards achieving Chartered status with a recognised professional institution. - A strong graduate cohort community and a supportive network across the business - Opportunities to take part in community projects and regional events Travel requirements & how we support you Our placements involve travel across regions, so you'll need a full UK driving licence and access to a car. To support this, we reimburse business mileage for any travel beyond your normal home to base commute, in line with our Travel & Expenses Policy (e.g., mileage is claimable after deducting home to base allowance). You'll receive guidance on claiming expenses, a Permit to Drive where required, and practical support to help you travel confidently and safely between sites. What's in it for you • Relocation support available, so distance doesn't have to be a barrier to starting your career with us. • Health and wellbeing support, including access to a health cash plan and employee assistance programme. • Flexible working options, supporting a healthy balance between work and life. • 28 days' annual leave, plus bank holidays. • Two paid volunteering days each year, giving you the opportunity to make a positive impact in your local community. • Employee discounts and benefits platform, helping your money go further. • Payment of professional institution membership fees. Who we're looking for We welcome graduates from all technical degree disciplines. What matters most is your curiosity, your willingness to learn, and your commitment to making a positive impact. You'll need: - Meng in an Engineering, Environmental or numerate science related subject. - Access to a car and a full UK driving licence by the programme start date - Flexibility to travel across Hampshire, Sussex, Kent and the Isle of Wight - You must have the right to work in the UK What you'll develop Depending on your pathway, you'll gain experience in areas such as: • Engineering and technical problem-solving • Asset and infrastructure management • Project delivery • Site and operational environments • Data and technical analysis • Safety, environmental and regulatory considerations • Working across multidisciplinary teams What happens next? • Applications are scheduled to close on 11 January 2027. We reserve the right to close the vacancy earlier if we receive a high volume of suitable applications, so we encourage you to apply early. • After submitting your application, you'll be invited to complete an online skills assessment and online interview as the next stage of the recruitment process. • Successful candidates will then be invited to an online assessment centre in February 2027. • The programme will start in September 2027. Interested in more than one graduate opportunity? You don't need to submit multiple applications. As part of the recruitment process, we'll give you the opportunity to tell us about other graduate roles or pathways you're interested in. Apply for the opportunity that best matches your interests and experience, and you'll have the chance to share your other preferences with us during the process. Ready to get started? If you're curious, collaborative and ready to learn, we'd love to hear from you. Help us build a better future for the South East. Apply now to join our Engineering Graduate Development Programme and take your first steps into a purpose-led career with real impact. Need flexibility in your work? Does this opportunity excite you but you're not 100% sure you meet all the requirements? Or are you concerned that standard working arrangements may not work with your personal circumstances? Whilst we can't accommodate every flexible working request, we'll try to find a practical solution. We encourage you to speak to us about what might work.
Gold Group Ltd
Airworthiness and Certification Consultant
Gold Group Ltd Bristol, Somerset
Job Title: Airworthiness & Certification Consultant (all levels considered) Location: Bristol / Remote Working Salary: £50,000 - £70,000 + Benefits Job Type: Full-Time Are you an Airworthiness Consultant looking for a remote working opportunity with a thriving UK engineering consultancy? We are a busy, growing, and highly successful consultancy seeking an Airworthiness & Certification Consultant to join our team. This role offers the flexibility to work from anywhere in the UK while delivering high-impact consultancy across complex defence and aerospace programmes. You will play a pivotal role in ensuring compliance with military and civil regulatory frameworks, shaping strategy, and mentoring the next generation of engineers. Key Responsibilities Deliver expert Airworthiness & Certification consultancy across relevant Military and Civil regulations (MAA, EASA, CAA, FAA, or equivalent). Provide technical leadership and assurance on key activities, including: Type Certification / Military Type Certification: Certification basis development, compliance demonstration, and managing deviations. Design Assurance & Control: Applying systems engineering principles to ensure design integrity and traceability. Safety Assessment: Executing and reviewing FHA, FMEA, FTA, and associated safety artefacts. Compliance & Standards: Interpreting and applying standards such as EASA CS, FAA FARs, Def Stan 00-970, and related frameworks. Configuration Management: Maintaining design documentation, change control, and audit trails. Advise clients on meeting complex regulatory and organizational obligations. Drive the continuous improvement of internal airworthiness tools, frameworks, and methodologies. Leading & Mentoring (for more senior applicants) Serve as a technical mentor to junior consultants, delivering guidance, feedback, and structured knowledge sharing. Support competency development across the team through coaching, training, and peer reviews. Exemplify professional standards and core values in all project engagements. Client Engagement (more senior applicants) Build and nurture trusted relationships with clients, regulators, and industry partners. Act as a primary technical interface to client Airworthiness Authorities, Certification Bodies, and Design Organisations. Translate complex regulatory and technical concepts into clear, actionable business advice. Identify organic business growth opportunities and cross-functional improvements within client projects. Governance, Quality & Assurance Ensure all technical deliverables meet rigorous internal quality standards and regulatory requirements. Participate in internal audits, assurance reviews, and process optimizations. Champion a strong safety culture and commitment to compliance across all engagements. Background, Skills & Qualifications Proven experience delivering Airworthiness & Certification projects within the UK defence or aerospace sectors. Deep technical expertise in one or more domain areas: Type Certification, Design Assurance, Safety Assessment (FHA/FMEA/FTA), Regulatory Liaison, or Configuration Management. Strong working knowledge of key regulatory frameworks (MAA, EASA, CAA, FAA). Excellent stakeholder engagement and communication skills, with experience interfacing directly with clients and regulatory bodies. Degree (BEng, BSc, MEng, MSc) in Aerospace, Mechanical, or Systems Engineering (or equivalent experience). Pragmatic, analytical problem solver with sharp attention to detail. Desirable additional criteria (more senior applicants) Chartered Engineer (CEng) status or actively working towards professional registration (RAeS, IET, IMechE). Experience leading small technical teams or discrete work packages in a consultancy environment. Familiarity with complex, multi-disciplinary systems in high-integrity environments. Exposure to digital tools and data-driven approaches for certification management. Security & Clearances Due to the nature of the projects, candidates must be eligible to undergo a standard DBS check and UK Security Clearance (SC). Why Join Us? Flexibility: Enjoy genuine, fully remote working from anywhere in the UK. Competitive Package: Excellent base salary reflective of your seniority and skill set. Impact & Culture: Join a supportive, highly skilled consultancy where your expertise directly influences high-profile national aerospace programmes. Diversity & Inclusion: We are an equal opportunities employer and proudly support the Armed Forces Covenant. We guarantee an interview to all UK military veterans, reservists, and their families who meet the essential criteria, supported by flexible policies for mobilization, deployment, and training. Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
Nov 22, 2026
Full time
Job Title: Airworthiness & Certification Consultant (all levels considered) Location: Bristol / Remote Working Salary: £50,000 - £70,000 + Benefits Job Type: Full-Time Are you an Airworthiness Consultant looking for a remote working opportunity with a thriving UK engineering consultancy? We are a busy, growing, and highly successful consultancy seeking an Airworthiness & Certification Consultant to join our team. This role offers the flexibility to work from anywhere in the UK while delivering high-impact consultancy across complex defence and aerospace programmes. You will play a pivotal role in ensuring compliance with military and civil regulatory frameworks, shaping strategy, and mentoring the next generation of engineers. Key Responsibilities Deliver expert Airworthiness & Certification consultancy across relevant Military and Civil regulations (MAA, EASA, CAA, FAA, or equivalent). Provide technical leadership and assurance on key activities, including: Type Certification / Military Type Certification: Certification basis development, compliance demonstration, and managing deviations. Design Assurance & Control: Applying systems engineering principles to ensure design integrity and traceability. Safety Assessment: Executing and reviewing FHA, FMEA, FTA, and associated safety artefacts. Compliance & Standards: Interpreting and applying standards such as EASA CS, FAA FARs, Def Stan 00-970, and related frameworks. Configuration Management: Maintaining design documentation, change control, and audit trails. Advise clients on meeting complex regulatory and organizational obligations. Drive the continuous improvement of internal airworthiness tools, frameworks, and methodologies. Leading & Mentoring (for more senior applicants) Serve as a technical mentor to junior consultants, delivering guidance, feedback, and structured knowledge sharing. Support competency development across the team through coaching, training, and peer reviews. Exemplify professional standards and core values in all project engagements. Client Engagement (more senior applicants) Build and nurture trusted relationships with clients, regulators, and industry partners. Act as a primary technical interface to client Airworthiness Authorities, Certification Bodies, and Design Organisations. Translate complex regulatory and technical concepts into clear, actionable business advice. Identify organic business growth opportunities and cross-functional improvements within client projects. Governance, Quality & Assurance Ensure all technical deliverables meet rigorous internal quality standards and regulatory requirements. Participate in internal audits, assurance reviews, and process optimizations. Champion a strong safety culture and commitment to compliance across all engagements. Background, Skills & Qualifications Proven experience delivering Airworthiness & Certification projects within the UK defence or aerospace sectors. Deep technical expertise in one or more domain areas: Type Certification, Design Assurance, Safety Assessment (FHA/FMEA/FTA), Regulatory Liaison, or Configuration Management. Strong working knowledge of key regulatory frameworks (MAA, EASA, CAA, FAA). Excellent stakeholder engagement and communication skills, with experience interfacing directly with clients and regulatory bodies. Degree (BEng, BSc, MEng, MSc) in Aerospace, Mechanical, or Systems Engineering (or equivalent experience). Pragmatic, analytical problem solver with sharp attention to detail. Desirable additional criteria (more senior applicants) Chartered Engineer (CEng) status or actively working towards professional registration (RAeS, IET, IMechE). Experience leading small technical teams or discrete work packages in a consultancy environment. Familiarity with complex, multi-disciplinary systems in high-integrity environments. Exposure to digital tools and data-driven approaches for certification management. Security & Clearances Due to the nature of the projects, candidates must be eligible to undergo a standard DBS check and UK Security Clearance (SC). Why Join Us? Flexibility: Enjoy genuine, fully remote working from anywhere in the UK. Competitive Package: Excellent base salary reflective of your seniority and skill set. Impact & Culture: Join a supportive, highly skilled consultancy where your expertise directly influences high-profile national aerospace programmes. Diversity & Inclusion: We are an equal opportunities employer and proudly support the Armed Forces Covenant. We guarantee an interview to all UK military veterans, reservists, and their families who meet the essential criteria, supported by flexible policies for mobilization, deployment, and training. Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.
HSEQ Technical Manager - Manufacturing
Ribble Packaging Ltd Oldham, Lancashire
Job Title: HSEQ Technical Manager Location: Oldham Salary: Up to £70K Job Type: Permanent, Full We are seeking an experienced and qualified H&S manager ( NEBOSH or similar multi-day accreditation) to take on HSEQ technical leadership at our manufacturing site. About the role: To provide technical leadership across the site, ensuring effective management of quality, health, safety, and environmental standards while maintaining compliance with customer, statutory and certification requirements. The role supports operational performance by developing practical systems, resolving technical and compliance issues, driving continuous improvement, and ensuring standards are consistently applied across manufacturing and conversion activities. This is a site-based, hands-on role and is not suited to routine home working or management from behind a desk. The post holder is expected to maintain a visible presence across manufacturing, engineering, and warehouse areas, actively engaging with people, processes, and equipment to understand issues first-hand, support standards and drive practical improvements. Reporting to: Operations Director Principle Accountabilities: Lead, manage and continuously improve the site's technical, quality, environmental and health and safety management systems, ensuring they remain effective, compliant, and aligned to business objectives. Maintain compliance with relevant customer, statutory and certification requirements, including BRCGS Packaging Materials, FSC chain of custody requirements and applicable health, safety, and environmental legislation. Provide technical leadership, supporting departments to ensure finished products meet agreed customer specifications, regulatory requirements, and internal quality standards, including print, die-cutting, gluing, dimensional accuracy, board grade, strength, and presentation requirements. Manage customer complaints, internal non-conformances, deviations and incidents through effective investigation, root cause analysis, corrective and preventive action, and verification of close-out. Plan, lead and support internal, customer, third-party and regulatory audits, ensuring the site remains audit-ready and that all actions are completed within agreed timescales. Lead site risk assessment activity relating to machinery safety, transport management, occupational health and safety, contractor management, product quality and legality, hygiene, environmental controls. Develop, review, and maintain site policies and procedures, work instructions, and other technical documentation to ensure they are current, practical, and consistently applied. Actively lead relevant site teams and review forums, including Hazard & Risk Management, quality review meetings, HSE reviews etc. Support new product introduction, trials, and change control activity, ensuring that quality, safety, and environmental risks are assessed before implementation. Manage technical and compliance requirements relating to specialist equipment, machinery purchase and modifications, infrastructure projects - ensuring activities are delivered safely and in accordance with applicable standards. Provide practical technical guidance and coaching to managers, supervisors and employees to build competence, improve standards, and support consistent compliance across the site. Monitor, analyse and report on key technical, quality, environmental and HSE performance indicators, identifying trends, risks, costs, and improvement opportunities for senior management. Lead a team of three field service engineers responsible for installation, servicing, and repair of customer site based Panotec machines (including site surveys pre machine installation). Undertake any other duties, projects or responsibilities that are appropriate to the level, scope, and purpose of the Technical Manager role. About you: Leadership Attributes: Integrity and Accountability - Acts with professionalism, fairness, and consistency, taking difficult decisions when required and holding self and others accountable. Analytical Problem Solving - Uses data, evidence, and root cause analysis to identify issues, assess risk and implement effective improvements. Visible Leadership - Leads by example, demonstrates high standards and takes ownership of quality, safety, environmental and technical performance. Customer and Compliance Focus - Understands internal and external customer expectations and ensures standards, legal duties and certification requirements are consistently met. Clear Direction - Sets clear priorities, makes sound decisions, and ensures teams understand what needs to be achieved. Coaching and Development - Builds capability through practical coaching, feedback and support, helping individuals and teams improve performance. Collaboration and Influence - Works effectively across departments, influencing others positively and maintaining constructive working relationships. Continuous Improvement - Challenges existing ways of working, identifies opportunities to reduce risk and waste, and drives sustainable improvements. Additional Requirements and Skills: Proven technical, quality, HSE and compliance experience within a manufacturing, engineering, or packaging environment. Relevant health and safety qualification, such as NEBOSH, with practical experience of risk assessment, incident investigation, and safe systems of work. Experience of quality, environmental and compliance management systems, including audits, non-conformance management, corrective action, and continuous improvement. Competent in producing clear procedures, reports, audit findings, risk assessments and management information using standard business systems. Additional Information: Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; Quality Manager, HSE Manager, SHEQ Manager, Technical Lead, Compliance Manager, may also be considered for this role.
Nov 22, 2026
Full time
Job Title: HSEQ Technical Manager Location: Oldham Salary: Up to £70K Job Type: Permanent, Full We are seeking an experienced and qualified H&S manager ( NEBOSH or similar multi-day accreditation) to take on HSEQ technical leadership at our manufacturing site. About the role: To provide technical leadership across the site, ensuring effective management of quality, health, safety, and environmental standards while maintaining compliance with customer, statutory and certification requirements. The role supports operational performance by developing practical systems, resolving technical and compliance issues, driving continuous improvement, and ensuring standards are consistently applied across manufacturing and conversion activities. This is a site-based, hands-on role and is not suited to routine home working or management from behind a desk. The post holder is expected to maintain a visible presence across manufacturing, engineering, and warehouse areas, actively engaging with people, processes, and equipment to understand issues first-hand, support standards and drive practical improvements. Reporting to: Operations Director Principle Accountabilities: Lead, manage and continuously improve the site's technical, quality, environmental and health and safety management systems, ensuring they remain effective, compliant, and aligned to business objectives. Maintain compliance with relevant customer, statutory and certification requirements, including BRCGS Packaging Materials, FSC chain of custody requirements and applicable health, safety, and environmental legislation. Provide technical leadership, supporting departments to ensure finished products meet agreed customer specifications, regulatory requirements, and internal quality standards, including print, die-cutting, gluing, dimensional accuracy, board grade, strength, and presentation requirements. Manage customer complaints, internal non-conformances, deviations and incidents through effective investigation, root cause analysis, corrective and preventive action, and verification of close-out. Plan, lead and support internal, customer, third-party and regulatory audits, ensuring the site remains audit-ready and that all actions are completed within agreed timescales. Lead site risk assessment activity relating to machinery safety, transport management, occupational health and safety, contractor management, product quality and legality, hygiene, environmental controls. Develop, review, and maintain site policies and procedures, work instructions, and other technical documentation to ensure they are current, practical, and consistently applied. Actively lead relevant site teams and review forums, including Hazard & Risk Management, quality review meetings, HSE reviews etc. Support new product introduction, trials, and change control activity, ensuring that quality, safety, and environmental risks are assessed before implementation. Manage technical and compliance requirements relating to specialist equipment, machinery purchase and modifications, infrastructure projects - ensuring activities are delivered safely and in accordance with applicable standards. Provide practical technical guidance and coaching to managers, supervisors and employees to build competence, improve standards, and support consistent compliance across the site. Monitor, analyse and report on key technical, quality, environmental and HSE performance indicators, identifying trends, risks, costs, and improvement opportunities for senior management. Lead a team of three field service engineers responsible for installation, servicing, and repair of customer site based Panotec machines (including site surveys pre machine installation). Undertake any other duties, projects or responsibilities that are appropriate to the level, scope, and purpose of the Technical Manager role. About you: Leadership Attributes: Integrity and Accountability - Acts with professionalism, fairness, and consistency, taking difficult decisions when required and holding self and others accountable. Analytical Problem Solving - Uses data, evidence, and root cause analysis to identify issues, assess risk and implement effective improvements. Visible Leadership - Leads by example, demonstrates high standards and takes ownership of quality, safety, environmental and technical performance. Customer and Compliance Focus - Understands internal and external customer expectations and ensures standards, legal duties and certification requirements are consistently met. Clear Direction - Sets clear priorities, makes sound decisions, and ensures teams understand what needs to be achieved. Coaching and Development - Builds capability through practical coaching, feedback and support, helping individuals and teams improve performance. Collaboration and Influence - Works effectively across departments, influencing others positively and maintaining constructive working relationships. Continuous Improvement - Challenges existing ways of working, identifies opportunities to reduce risk and waste, and drives sustainable improvements. Additional Requirements and Skills: Proven technical, quality, HSE and compliance experience within a manufacturing, engineering, or packaging environment. Relevant health and safety qualification, such as NEBOSH, with practical experience of risk assessment, incident investigation, and safe systems of work. Experience of quality, environmental and compliance management systems, including audits, non-conformance management, corrective action, and continuous improvement. Competent in producing clear procedures, reports, audit findings, risk assessments and management information using standard business systems. Additional Information: Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; Quality Manager, HSE Manager, SHEQ Manager, Technical Lead, Compliance Manager, may also be considered for this role.
Penguin Recruitment Ltd
Graduate Acoustic Consultant
Penguin Recruitment Ltd Andover, Hampshire
Graduate Acoustic Consultant Overview We are seeking a motivated and enthusiastic Graduate Acoustic Consultant to join an acoustic consultancy based near Andover. This is an excellent opportunity for a recent graduate with a passion for acoustics to develop their career in a professional and supportive environment. Our client's consultancy specialises in providing high-quality acoustic services to a diverse range of clients across the public and private sectors. Responsibilities As a Graduate Acoustic Consultant, your key responsibilities will include: Conducting noise and vibration surveys. Performing noise modelling and analysis. Preparing detailed technical reports. Managing projects to ensure timely and cost-effective delivery. Conducting sound insulation testing in accordance with industry standards. Qualifications The ideal candidate will possess: A degree in Acoustics, Environmental Science, or a related discipline. Strong analytical and problem-solving skills. Excellent written and verbal communication abilities. A proactive and organized approach to work. A full UK driving license (preferred but not essential). Day-to-Day Your typical day will involve: Visiting client sites to carry out noise and vibration surveys. Using specialized software to model and analyze noise data. Collaborating with clients, architects, and planning consultants to provide practical acoustic solutions. Writing comprehensive reports to support planning applications and regulatory compliance. Managing multiple projects simultaneously while maintaining high standards of quality and efficiency. Benefits We offer a competitive benefits package, including: A supportive and collaborative working environment. Opportunities for professional development and training. Exposure to a wide variety of projects and industries. Career progression opportunities within a growing consultancy. A central location with excellent transport links. If you are interested in this or any other opportunities in acoustics, please contact Amir Gharaati of Penguin Recruitment for more information!
Nov 22, 2026
Full time
Graduate Acoustic Consultant Overview We are seeking a motivated and enthusiastic Graduate Acoustic Consultant to join an acoustic consultancy based near Andover. This is an excellent opportunity for a recent graduate with a passion for acoustics to develop their career in a professional and supportive environment. Our client's consultancy specialises in providing high-quality acoustic services to a diverse range of clients across the public and private sectors. Responsibilities As a Graduate Acoustic Consultant, your key responsibilities will include: Conducting noise and vibration surveys. Performing noise modelling and analysis. Preparing detailed technical reports. Managing projects to ensure timely and cost-effective delivery. Conducting sound insulation testing in accordance with industry standards. Qualifications The ideal candidate will possess: A degree in Acoustics, Environmental Science, or a related discipline. Strong analytical and problem-solving skills. Excellent written and verbal communication abilities. A proactive and organized approach to work. A full UK driving license (preferred but not essential). Day-to-Day Your typical day will involve: Visiting client sites to carry out noise and vibration surveys. Using specialized software to model and analyze noise data. Collaborating with clients, architects, and planning consultants to provide practical acoustic solutions. Writing comprehensive reports to support planning applications and regulatory compliance. Managing multiple projects simultaneously while maintaining high standards of quality and efficiency. Benefits We offer a competitive benefits package, including: A supportive and collaborative working environment. Opportunities for professional development and training. Exposure to a wide variety of projects and industries. Career progression opportunities within a growing consultancy. A central location with excellent transport links. If you are interested in this or any other opportunities in acoustics, please contact Amir Gharaati of Penguin Recruitment for more information!
Bennett and Game Recruitment
Workshop Engineer
Bennett and Game Recruitment Peterborough, Cambridgeshire
Location: Peterborough Salary: £38,000 - £42,800 Hours: 40 hours per week, Monday - Friday Contract: Permanent About the Role Our client is a leading provider of specialist municipal equipment, including road sweeping machinery, winter maintenance equipment and mowing machinery. Due to continued demand, they are looking to recruit an experienced Workshop Service Engineer to join their established engineering team. The successful candidate will be responsible for carrying out servicing, maintenance, repairs and refurbishments across a varied range of specialist equipment. This is a hands-on workshop position requiring strong mechanical, hydraulic and auto-electrical knowledge, with additional experience in welding and fabrication being beneficial. Key Responsibilities Carry out servicing, maintenance and repairs on compact road sweepers, truck-mounted sweepers, winter spreaders and mowing equipment. Diagnose and resolve mechanical, hydraulic and electrical faults. Complete refurbishment work and accident damage repairs across the equipment range. Undertake body-building work and welding where required. Assist with fitting and mounting spreaders and other associated engineering projects. Ensure all work is completed efficiently, safely and to a high standard. Follow company procedures and maintain a safe working environment. Support seasonal winter maintenance requirements when necessary. Requirements Previous experience as a Workshop Service Engineer, Plant Engineer, HGV Technician, Agricultural Engineer or similar. Strong mechanical, hydraulic and auto-electrical fault-finding skills. Experience working on heavy plant, vehicles or specialist equipment. Welding and fabrication experience would be advantageous. Ability to work independently and manage workload effectively. Good communication skills and a proactive approach. Full UK driving licence. HGV licence advantageous, although candidates willing to obtain one will be considered. Support towards gaining the licence may be available for the right candidate. Salary & Benefits £38,000 - £42,800 basic salary. 40 hours per week, Monday to Friday. Permanent position. Opportunity to work on a varied range of specialist equipment. Potential support towards obtaining an HGV licence. This is an excellent opportunity for an experienced engineer to join an established engineering team, working on a diverse range of specialist machinery. If you have a strong mechanical background, enjoy workshop-based engineering and are looking for a new challenge, we'd be keen to hear from you. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Nov 22, 2026
Full time
Location: Peterborough Salary: £38,000 - £42,800 Hours: 40 hours per week, Monday - Friday Contract: Permanent About the Role Our client is a leading provider of specialist municipal equipment, including road sweeping machinery, winter maintenance equipment and mowing machinery. Due to continued demand, they are looking to recruit an experienced Workshop Service Engineer to join their established engineering team. The successful candidate will be responsible for carrying out servicing, maintenance, repairs and refurbishments across a varied range of specialist equipment. This is a hands-on workshop position requiring strong mechanical, hydraulic and auto-electrical knowledge, with additional experience in welding and fabrication being beneficial. Key Responsibilities Carry out servicing, maintenance and repairs on compact road sweepers, truck-mounted sweepers, winter spreaders and mowing equipment. Diagnose and resolve mechanical, hydraulic and electrical faults. Complete refurbishment work and accident damage repairs across the equipment range. Undertake body-building work and welding where required. Assist with fitting and mounting spreaders and other associated engineering projects. Ensure all work is completed efficiently, safely and to a high standard. Follow company procedures and maintain a safe working environment. Support seasonal winter maintenance requirements when necessary. Requirements Previous experience as a Workshop Service Engineer, Plant Engineer, HGV Technician, Agricultural Engineer or similar. Strong mechanical, hydraulic and auto-electrical fault-finding skills. Experience working on heavy plant, vehicles or specialist equipment. Welding and fabrication experience would be advantageous. Ability to work independently and manage workload effectively. Good communication skills and a proactive approach. Full UK driving licence. HGV licence advantageous, although candidates willing to obtain one will be considered. Support towards gaining the licence may be available for the right candidate. Salary & Benefits £38,000 - £42,800 basic salary. 40 hours per week, Monday to Friday. Permanent position. Opportunity to work on a varied range of specialist equipment. Potential support towards obtaining an HGV licence. This is an excellent opportunity for an experienced engineer to join an established engineering team, working on a diverse range of specialist machinery. If you have a strong mechanical background, enjoy workshop-based engineering and are looking for a new challenge, we'd be keen to hear from you. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
The Solution Auto
Mechanical Engineer
The Solution Auto Heywood, Lancashire
Mechanical / Electrical Maintenance Engineer Location: Heywood, Greater Manchester Salary: £45,000 basic, with realistic OTE of £48,000-£52,000 per annum Hours: Full-time, Monday to Friday - no shifts or weekend working We are looking for an experienced Mechanical / Electrical Maintenance Engineer to join an established engineering operation based in Heywood. This is an excellent opportunity for a mechanically qualified engineer who also has practical electrical experience, particularly working with three-phase motors and switchgear. The successful candidate will work across both the workshop and customer sites throughout the UK, carrying out maintenance, fault-finding, repairs and equipment installations. The Role This is a hands-on engineering position involving both mechanical and electrical maintenance. Your responsibilities will include: Carrying out planned preventative maintenance on machinery and equipment. Diagnosing and repairing mechanical and electrical faults. Fault-finding and carrying out repairs on three-phase motors and switchgear. Reading and interpreting electrical schematics, mechanical drawings and technical manuals. Maintaining and repairing equipment both in the workshop and at customer sites. Assisting with machinery installations and equipment upgrades. Assembling and fabricating mechanical components. Carrying out MIG welding and general fabrication duties. Maintaining accurate maintenance and repair records. Ensuring all work is completed safely and to a high standard. Essential requirements: A recognised qualification in Mechanical Engineering or Mechanical/Electrical Engineering. Strong practical mechanical engineering experience. Hands-on experience with three-phase electrical motors and switchgear. The ability to diagnose faults and carry out mechanical and electrical repairs. Experience using workshop tools and equipment. MIG welding and fabrication experience. A full UK driving licence. We are particularly interested in candidates who have a good mechanical engineering background alongside practical electrical experience. Electrical qualifications are not necessarily essential at this stage. If you have the relevant hands-on experience but would benefit from further electrical training or formal qualifications, there may be an opportunity for the successful candidate to receive additional training. Working Arrangements Based at a modern workshop in Heywood. Occasional travel to customer sites throughout the UK. Customer site travel is paid at normal overtime rates. Monday to Friday, days only. No shift work. No routine weekend working. Salary & Benefits £45,000 starting basic salary. Realistic OTE of £48,000-£52,000. Optional overtime, paid at overtime rates. Company pension. Private medical insurance. Private dental insurance. Company sick pay. Free on-site parking. Company events. Why Apply? This is a great opportunity for a mechanically qualified engineer looking to develop their electrical skills within a varied maintenance engineering role. You'll have the opportunity to work on a range of specialist equipment, tackle interesting engineering challenges and develop your technical skills, with additional electrical training available where appropriate. If you have the mechanical qualifications and practical three-phase electrical experience we're looking for, we'd be keen to speak with you. Who are you applying to? The Solution Automotive Recruitment have been placing candidates into the UK Motor Trade since 1999. We have a fantastic relationship with all our clients and candidates across the country, many very long standing relationships. If you are skilled and experienced Automotive candidate, we want to hear from you and rest assured, you'll be dealing with a person, not just a consultant! Unfortunately due to the volume of applications we get, we can only respond to the candidates who match the criteria set for this vacancy. We will retain your CV on our database and make contact as and when suitable vacancies arise. We will NEVER send your CV anywhere without your permission
Nov 22, 2026
Full time
Mechanical / Electrical Maintenance Engineer Location: Heywood, Greater Manchester Salary: £45,000 basic, with realistic OTE of £48,000-£52,000 per annum Hours: Full-time, Monday to Friday - no shifts or weekend working We are looking for an experienced Mechanical / Electrical Maintenance Engineer to join an established engineering operation based in Heywood. This is an excellent opportunity for a mechanically qualified engineer who also has practical electrical experience, particularly working with three-phase motors and switchgear. The successful candidate will work across both the workshop and customer sites throughout the UK, carrying out maintenance, fault-finding, repairs and equipment installations. The Role This is a hands-on engineering position involving both mechanical and electrical maintenance. Your responsibilities will include: Carrying out planned preventative maintenance on machinery and equipment. Diagnosing and repairing mechanical and electrical faults. Fault-finding and carrying out repairs on three-phase motors and switchgear. Reading and interpreting electrical schematics, mechanical drawings and technical manuals. Maintaining and repairing equipment both in the workshop and at customer sites. Assisting with machinery installations and equipment upgrades. Assembling and fabricating mechanical components. Carrying out MIG welding and general fabrication duties. Maintaining accurate maintenance and repair records. Ensuring all work is completed safely and to a high standard. Essential requirements: A recognised qualification in Mechanical Engineering or Mechanical/Electrical Engineering. Strong practical mechanical engineering experience. Hands-on experience with three-phase electrical motors and switchgear. The ability to diagnose faults and carry out mechanical and electrical repairs. Experience using workshop tools and equipment. MIG welding and fabrication experience. A full UK driving licence. We are particularly interested in candidates who have a good mechanical engineering background alongside practical electrical experience. Electrical qualifications are not necessarily essential at this stage. If you have the relevant hands-on experience but would benefit from further electrical training or formal qualifications, there may be an opportunity for the successful candidate to receive additional training. Working Arrangements Based at a modern workshop in Heywood. Occasional travel to customer sites throughout the UK. Customer site travel is paid at normal overtime rates. Monday to Friday, days only. No shift work. No routine weekend working. Salary & Benefits £45,000 starting basic salary. Realistic OTE of £48,000-£52,000. Optional overtime, paid at overtime rates. Company pension. Private medical insurance. Private dental insurance. Company sick pay. Free on-site parking. Company events. Why Apply? This is a great opportunity for a mechanically qualified engineer looking to develop their electrical skills within a varied maintenance engineering role. You'll have the opportunity to work on a range of specialist equipment, tackle interesting engineering challenges and develop your technical skills, with additional electrical training available where appropriate. If you have the mechanical qualifications and practical three-phase electrical experience we're looking for, we'd be keen to speak with you. Who are you applying to? The Solution Automotive Recruitment have been placing candidates into the UK Motor Trade since 1999. We have a fantastic relationship with all our clients and candidates across the country, many very long standing relationships. If you are skilled and experienced Automotive candidate, we want to hear from you and rest assured, you'll be dealing with a person, not just a consultant! Unfortunately due to the volume of applications we get, we can only respond to the candidates who match the criteria set for this vacancy. We will retain your CV on our database and make contact as and when suitable vacancies arise. We will NEVER send your CV anywhere without your permission
Trescal Limited
Calibration Engineer - On-site
Trescal Limited Yateley, Hampshire
Are you an experienced Calibration Engineer looking for a new challenge with a global leader in calibration services? Do you want to join a company committed to sustainability and career development? If so, Trescal has an exciting opportunity for you as a Calibration Engineer - On-site. Join our expert team and play a key role in delivering high-quality calibration solutions to our diverse customer base. About the Role As a Calibration Engineer - On-site at Trescal, you will be responsible for performing calibration and measurement of a wide range of equipment in accordance with UKAS, ISO 17025, and customer-specific procedures. Your main duties will include: Calibrating measuring instrumentation across various disciplines, such as electrical, mechanical, dimensional, temperature, pressure, and mass, using approved procedures and metrology best practices. Maintaining accurate and traceable records of all work, data, and results using our calibration management systems. Producing, developing, and auditing calibration procedures for both automated and manual processes. Ensuring all calibration certificates and documentation are completed to the highest standards and in a timely manner. Supporting internal and external audits as required, and participating in interlaboratory measurement comparisons. Providing technical support and guidance to colleagues, and assisting with training where necessary. Liaising with customers to resolve technical queries and ensure their requirements are met. Conducting all tasks in line with Trescal's Health and Safety procedures, quality standards, and environmental commitments. Occasionally undertaking other reasonable duties within your capability, with training provided as needed. Benefits Competitive salary Continuous development and training plan 25 days holiday and the option to buy/sell days Flexible working options Access to the Trescal PerksHub Employee well-being programme Medical Health Cash Plan Pension and Life Assurance Scheme Cycle to work scheme Gym membership discounts Requirements Technical qualification such as HND, HNC, NVQ/BTEC Level 3 or higher in an engineering discipline, or equivalent relevant experience. Previous experience in a calibration laboratory or similar environment. Good understanding of calibration practices, theories, and relevant standards including ISO/IEC 17025. Proficiency with Windows-based operating systems and laboratory management software. Strong attention to detail and ability to maintain accurate records. Excellent communication and interpersonal skills, with a customer-focused approach. Ability to work independently to approved calibration procedures and manage your own workload. Team player with a willingness to support and mentor colleagues. Commitment to upholding Trescal's values, including environmental sustainability and operational excellence.
Nov 22, 2026
Full time
Are you an experienced Calibration Engineer looking for a new challenge with a global leader in calibration services? Do you want to join a company committed to sustainability and career development? If so, Trescal has an exciting opportunity for you as a Calibration Engineer - On-site. Join our expert team and play a key role in delivering high-quality calibration solutions to our diverse customer base. About the Role As a Calibration Engineer - On-site at Trescal, you will be responsible for performing calibration and measurement of a wide range of equipment in accordance with UKAS, ISO 17025, and customer-specific procedures. Your main duties will include: Calibrating measuring instrumentation across various disciplines, such as electrical, mechanical, dimensional, temperature, pressure, and mass, using approved procedures and metrology best practices. Maintaining accurate and traceable records of all work, data, and results using our calibration management systems. Producing, developing, and auditing calibration procedures for both automated and manual processes. Ensuring all calibration certificates and documentation are completed to the highest standards and in a timely manner. Supporting internal and external audits as required, and participating in interlaboratory measurement comparisons. Providing technical support and guidance to colleagues, and assisting with training where necessary. Liaising with customers to resolve technical queries and ensure their requirements are met. Conducting all tasks in line with Trescal's Health and Safety procedures, quality standards, and environmental commitments. Occasionally undertaking other reasonable duties within your capability, with training provided as needed. Benefits Competitive salary Continuous development and training plan 25 days holiday and the option to buy/sell days Flexible working options Access to the Trescal PerksHub Employee well-being programme Medical Health Cash Plan Pension and Life Assurance Scheme Cycle to work scheme Gym membership discounts Requirements Technical qualification such as HND, HNC, NVQ/BTEC Level 3 or higher in an engineering discipline, or equivalent relevant experience. Previous experience in a calibration laboratory or similar environment. Good understanding of calibration practices, theories, and relevant standards including ISO/IEC 17025. Proficiency with Windows-based operating systems and laboratory management software. Strong attention to detail and ability to maintain accurate records. Excellent communication and interpersonal skills, with a customer-focused approach. Ability to work independently to approved calibration procedures and manage your own workload. Team player with a willingness to support and mentor colleagues. Commitment to upholding Trescal's values, including environmental sustainability and operational excellence.
Bennett and Game Recruitment
Field Service Engineer
Bennett and Game Recruitment
Location: Birmingham and surrounding areas Salary: £38,000 - £43,200 Hours: 40 hours per week, Monday - Friday About the Role Our client is a leading provider of specialist municipal equipment, including road sweeping machinery and winter maintenance vehicles. Due to continued demand, they are looking to recruit experienced Field Service Engineers to join their team, covering customers throughout the Birmingham area. Working from a fully equipped company service vehicle, you will carry out servicing, maintenance, diagnostics and repairs on a varied range of specialist equipment at customer sites. This is a customer-facing position where you will play an important role in keeping machinery operational and minimising customer downtime. Key Responsibilities Carry out servicing, maintenance, diagnostics and repairs on specialist equipment. Fault-find across hydraulic, electrical, pneumatic and mechanical systems. Complete scheduled servicing, inspections and reactive breakdown repairs. Accurately complete service reports and associated documentation. Liaise with customers, service coordinators and technical support teams. Ensure all work is completed safely and in accordance with company procedures. Provide support during seasonal winter maintenance operations. Requirements Previous experience as a Field Service Engineer, Plant Engineer, Agricultural Engineer, HGV Technician or similar. Strong mechanical, hydraulic and electrical fault-finding skills. Ability to work independently and manage your own workload. Good communication and customer service skills. Full UK driving licence. A proactive approach with a commitment to delivering high standards of workmanship. HGV licence advantageous, although candidates without one will be considered. Support towards obtaining an HGV licence may be available for the right person. Salary & Benefits £38,000 - £43,200 basic salary. 40 hours per week, Monday to Friday. Door-to-door pay. 24 days annual leave plus bank holidays. Overtime paid at time and a half after 40 hours, double time on Sundays. 4% employer pension contribution. Health Shield benefits, including health and mental health support. Eye care vouchers. Life assurance up to 3 times annual salary. Holiday awards and employee of the quarter recognition. Study and development support. This is an excellent opportunity for an experienced engineer to join an established business, working on a varied range of specialist equipment with the benefit of a company service vehicle, door-to-door pay and ongoing technical development. If you're an experienced engineer looking for a new challenge in the Birmingham area, I'd be keen to hear from you Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
Nov 22, 2026
Full time
Location: Birmingham and surrounding areas Salary: £38,000 - £43,200 Hours: 40 hours per week, Monday - Friday About the Role Our client is a leading provider of specialist municipal equipment, including road sweeping machinery and winter maintenance vehicles. Due to continued demand, they are looking to recruit experienced Field Service Engineers to join their team, covering customers throughout the Birmingham area. Working from a fully equipped company service vehicle, you will carry out servicing, maintenance, diagnostics and repairs on a varied range of specialist equipment at customer sites. This is a customer-facing position where you will play an important role in keeping machinery operational and minimising customer downtime. Key Responsibilities Carry out servicing, maintenance, diagnostics and repairs on specialist equipment. Fault-find across hydraulic, electrical, pneumatic and mechanical systems. Complete scheduled servicing, inspections and reactive breakdown repairs. Accurately complete service reports and associated documentation. Liaise with customers, service coordinators and technical support teams. Ensure all work is completed safely and in accordance with company procedures. Provide support during seasonal winter maintenance operations. Requirements Previous experience as a Field Service Engineer, Plant Engineer, Agricultural Engineer, HGV Technician or similar. Strong mechanical, hydraulic and electrical fault-finding skills. Ability to work independently and manage your own workload. Good communication and customer service skills. Full UK driving licence. A proactive approach with a commitment to delivering high standards of workmanship. HGV licence advantageous, although candidates without one will be considered. Support towards obtaining an HGV licence may be available for the right person. Salary & Benefits £38,000 - £43,200 basic salary. 40 hours per week, Monday to Friday. Door-to-door pay. 24 days annual leave plus bank holidays. Overtime paid at time and a half after 40 hours, double time on Sundays. 4% employer pension contribution. Health Shield benefits, including health and mental health support. Eye care vouchers. Life assurance up to 3 times annual salary. Holiday awards and employee of the quarter recognition. Study and development support. This is an excellent opportunity for an experienced engineer to join an established business, working on a varied range of specialist equipment with the benefit of a company service vehicle, door-to-door pay and ongoing technical development. If you're an experienced engineer looking for a new challenge in the Birmingham area, I'd be keen to hear from you Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.
The Solution Auto
Mechanical Fitter / Mobile Plant Engineer
The Solution Auto Heywood, Lancashire
Mechanical Fitter / Mobile Plant Engineer Location: Heywood, Greater Manchester Salary: £45,000 basic, with realistic OTE of £48,000-£52,000 per annum Hours: Full-time, Monday to Friday - no shifts or weekend working We are looking for an experienced Mechanical Fitter / Mobile Plant Engineer to join a growing engineering operation based in Heywood. This is an excellent opportunity for a hands-on mechanical engineer with a background in HGVs, cranes, excavators, heavy plant or similar mobile machinery. Working from a modern workshop, as well as visiting customer sites across the UK, you will be responsible for servicing, maintaining, repairing and assembling specialist heavy equipment. The Role This is a varied, practical position suited to someone who enjoys getting hands-on with machinery, diagnosing faults and finding solutions. Your responsibilities will include: Servicing and maintaining diesel engines. Diagnosing mechanical faults and carrying out repairs. Working on basic hydraulic and pneumatic systems. Carrying out basic 12V and 24V electrical repairs. Assembling and fabricating mechanical components. MIG welding and general workshop fabrication. Using hand tools, power tools and workshop equipment. Carrying out equipment repairs and maintenance at customer sites. Ensuring all work is completed to a high standard, with safety and quality in mind. What We're Looking For You must have: Completed a recognised apprenticeship in a relevant mechanical trade. Previous experience working with HGVs, cranes, excavators, heavy mobile plant or similar machinery. Practical experience servicing diesel engines. An understanding of hydraulics and mechanical systems. Some 12V/24V electrical fault-finding and repair experience. The ability to work independently and use your own initiative. A full UK driving licence. You don't need to hold an extensive list of additional qualifications. We are much more interested in your practical experience, mechanical ability and the work you have carried out. Candidates will be asked about their hands-on experience during the interview process. UK Travel Requirements The role involves occasional travel to customer sites across the UK, so flexibility to stay away from home is essential. On average, you can expect approximately four overnight stays per month. Some months may involve no overnight stays at all. This is a requirement of the position, as customers are based throughout the UK. Salary & Benefits £45,000 starting basic salary. Realistic OTE of £48,000-£52,000. Optional overtime, paid at overtime rates. Monday to Friday working. No weekend working. No shift work. Company pension. Private medical insurance. Private dental insurance. Company sick pay. Free on-site parking. Company events. Why Apply? This is an opportunity to join a close-knit engineering team where employees are valued, practical skills are recognised and work-life balance matters. Weekends are yours to enjoy, with no shift patterns or routine weekend commitments. Overtime is available if you want to increase your earnings, but it is entirely optional. If you're an experienced mechanical fitter or mobile plant engineer looking for a well-paid, Monday-to-Friday opportunity, we'd like to hear from you. Who are you applying to? The Solution Automotive Recruitment have been placing candidates into the UK Motor Trade since 1999. We have a fantastic relationship with all our clients and candidates across the country, many very long standing relationships. If you are skilled and experienced Automotive candidate, we want to hear from you and rest assured, you'll be dealing with a person, not just a consultant! Unfortunately due to the volume of applications we get, we can only respond to the candidates who match the criteria set for this vacancy. We will retain your CV on our database and make contact as and when suitable vacancies arise. We will NEVER send your CV anywhere without your permission
Nov 22, 2026
Full time
Mechanical Fitter / Mobile Plant Engineer Location: Heywood, Greater Manchester Salary: £45,000 basic, with realistic OTE of £48,000-£52,000 per annum Hours: Full-time, Monday to Friday - no shifts or weekend working We are looking for an experienced Mechanical Fitter / Mobile Plant Engineer to join a growing engineering operation based in Heywood. This is an excellent opportunity for a hands-on mechanical engineer with a background in HGVs, cranes, excavators, heavy plant or similar mobile machinery. Working from a modern workshop, as well as visiting customer sites across the UK, you will be responsible for servicing, maintaining, repairing and assembling specialist heavy equipment. The Role This is a varied, practical position suited to someone who enjoys getting hands-on with machinery, diagnosing faults and finding solutions. Your responsibilities will include: Servicing and maintaining diesel engines. Diagnosing mechanical faults and carrying out repairs. Working on basic hydraulic and pneumatic systems. Carrying out basic 12V and 24V electrical repairs. Assembling and fabricating mechanical components. MIG welding and general workshop fabrication. Using hand tools, power tools and workshop equipment. Carrying out equipment repairs and maintenance at customer sites. Ensuring all work is completed to a high standard, with safety and quality in mind. What We're Looking For You must have: Completed a recognised apprenticeship in a relevant mechanical trade. Previous experience working with HGVs, cranes, excavators, heavy mobile plant or similar machinery. Practical experience servicing diesel engines. An understanding of hydraulics and mechanical systems. Some 12V/24V electrical fault-finding and repair experience. The ability to work independently and use your own initiative. A full UK driving licence. You don't need to hold an extensive list of additional qualifications. We are much more interested in your practical experience, mechanical ability and the work you have carried out. Candidates will be asked about their hands-on experience during the interview process. UK Travel Requirements The role involves occasional travel to customer sites across the UK, so flexibility to stay away from home is essential. On average, you can expect approximately four overnight stays per month. Some months may involve no overnight stays at all. This is a requirement of the position, as customers are based throughout the UK. Salary & Benefits £45,000 starting basic salary. Realistic OTE of £48,000-£52,000. Optional overtime, paid at overtime rates. Monday to Friday working. No weekend working. No shift work. Company pension. Private medical insurance. Private dental insurance. Company sick pay. Free on-site parking. Company events. Why Apply? This is an opportunity to join a close-knit engineering team where employees are valued, practical skills are recognised and work-life balance matters. Weekends are yours to enjoy, with no shift patterns or routine weekend commitments. Overtime is available if you want to increase your earnings, but it is entirely optional. If you're an experienced mechanical fitter or mobile plant engineer looking for a well-paid, Monday-to-Friday opportunity, we'd like to hear from you. Who are you applying to? The Solution Automotive Recruitment have been placing candidates into the UK Motor Trade since 1999. We have a fantastic relationship with all our clients and candidates across the country, many very long standing relationships. If you are skilled and experienced Automotive candidate, we want to hear from you and rest assured, you'll be dealing with a person, not just a consultant! Unfortunately due to the volume of applications we get, we can only respond to the candidates who match the criteria set for this vacancy. We will retain your CV on our database and make contact as and when suitable vacancies arise. We will NEVER send your CV anywhere without your permission
Seismic Recruitment
Electronics & Instrumentation Technician
Seismic Recruitment Peterborough, Cambridgeshire
Electronics & Instrumentation Technician Peterborough Initial 12 month contract - rolling contract/likely to extend for the right person! 37 hours a week: Mon-Thurs 8am - 4pm, Friday 8am - 3.30pm Up to £22.05 PAYE hourly rate plus holiday and pension contribution OR Umbrella hourly rates up to £29.95 - depending on experience Our client is a globally renowned world leader in the design, manufacture and support of a world class range of engines, they are looking for an Electronics & Instrumentation Technician to join their Electronics, Controls and Instrumentation (EC&I) team, who are responsible for the calibration and maintenance of the test facility measurement instrumentation and control systems to ensure quality data output is maintained and to assist engine development and verification. The ideal candidate needs the knowledge, base skills, and experience to be able to calibrate, repair and maintain the electronic control and data acquisition systems including precision instrumentation within the facility to the high standard required to keep the company at the forefront of today's technology. This also includes the ability to maintain records, read and interpret technical drawings and work with engineers, contractors, and colleagues to install, commission, and maintain new, refurbished, and modified equipment. Responsibilities are varied and will include: Build/Upgrade of instrumentation panels Conduct electronic diagnostic investigations using appropriate instrumentation Conduct Total Preventative Maintenance (TPM) and calibrations of engine test cells and equipment Maintain and upgrade test rigs and equipment Provide first line breakdown cover for engine test cells and equipment Skills and Experience required: Either qualified through a technical apprenticeship with electrical/electronic bias or equivalent industry experience within the electronics/electrical field. Experienced in build/manufacture of instrumentation panels Calibration and fault finding of precision instrumentation The ability to follow written work instructions and document progress Ability to read and interpret, electronic design schematics, hydraulic, pneumatic, and electrical drawings. Desirable: Multi-skilled in both Electrical and Electronics disciplines Understanding/experience of working in engine test cell environment Understanding/experience of Root Cause Analysis techniques and permanent corrective actions. ISO7671:2017 IEE 18th Edition Electrical Regulations Competent in Microsoft Office Suite Level 3 Apprenticeship or HNC or equivalent in an electronic/electrical discipline To apply, please submit a copy of your up-to-date CV clearly indicating your relevant experience. Applicants must have an existing right to work in the UK and evidence of eligibility will be required. Suitable candidates will be contacted. The above represents a summary of the contract assignment. A full description of this contract assignment is available. A full explanation of this rate and all deductions will be explained in a key information document (KID) supplied to registered candidates.
Nov 22, 2026
Full time
Electronics & Instrumentation Technician Peterborough Initial 12 month contract - rolling contract/likely to extend for the right person! 37 hours a week: Mon-Thurs 8am - 4pm, Friday 8am - 3.30pm Up to £22.05 PAYE hourly rate plus holiday and pension contribution OR Umbrella hourly rates up to £29.95 - depending on experience Our client is a globally renowned world leader in the design, manufacture and support of a world class range of engines, they are looking for an Electronics & Instrumentation Technician to join their Electronics, Controls and Instrumentation (EC&I) team, who are responsible for the calibration and maintenance of the test facility measurement instrumentation and control systems to ensure quality data output is maintained and to assist engine development and verification. The ideal candidate needs the knowledge, base skills, and experience to be able to calibrate, repair and maintain the electronic control and data acquisition systems including precision instrumentation within the facility to the high standard required to keep the company at the forefront of today's technology. This also includes the ability to maintain records, read and interpret technical drawings and work with engineers, contractors, and colleagues to install, commission, and maintain new, refurbished, and modified equipment. Responsibilities are varied and will include: Build/Upgrade of instrumentation panels Conduct electronic diagnostic investigations using appropriate instrumentation Conduct Total Preventative Maintenance (TPM) and calibrations of engine test cells and equipment Maintain and upgrade test rigs and equipment Provide first line breakdown cover for engine test cells and equipment Skills and Experience required: Either qualified through a technical apprenticeship with electrical/electronic bias or equivalent industry experience within the electronics/electrical field. Experienced in build/manufacture of instrumentation panels Calibration and fault finding of precision instrumentation The ability to follow written work instructions and document progress Ability to read and interpret, electronic design schematics, hydraulic, pneumatic, and electrical drawings. Desirable: Multi-skilled in both Electrical and Electronics disciplines Understanding/experience of working in engine test cell environment Understanding/experience of Root Cause Analysis techniques and permanent corrective actions. ISO7671:2017 IEE 18th Edition Electrical Regulations Competent in Microsoft Office Suite Level 3 Apprenticeship or HNC or equivalent in an electronic/electrical discipline To apply, please submit a copy of your up-to-date CV clearly indicating your relevant experience. Applicants must have an existing right to work in the UK and evidence of eligibility will be required. Suitable candidates will be contacted. The above represents a summary of the contract assignment. A full description of this contract assignment is available. A full explanation of this rate and all deductions will be explained in a key information document (KID) supplied to registered candidates.
WE Talent
Design and Engineering Manager
WE Talent Chelmsford, Essex
Full job description Design and Engineering Manager RADIX £85,000-£95,000 + 10% bonus We're working exclusively with RADIX to recruit a Design and Engineering Manager, a key appointment as the business continues to grow and develop its design capability. Working alongside its existing engineering consultants, this is an opportunity to establish and lead the design function, combining hands-on geotechnical and structural engineering with the freedom to shape technical standards, build a team and develop design into a commercial service. RADIX is looking for someone who wants to make a genuine contribution to a growing business, take ownership of an important part of its future and grow with the company. For the right person, there is potential to progress into a wider leadership role, including the possibility of board-level involvement. What the role involves Designing screw pile foundations for renewable energy, infrastructure and building projects, including geotechnical and structural checks, load testing and durability. Producing and signing off complete design packages, including calculations, specifications and construction-ready drawings. Interpreting ground investigation data and load test results to inform design decisions and optimise foundation solutions. Setting technical standards and developing RADIX's design philosophy, calculation templates, reports and procedures. Taking the technical lead with clients, their engineers and independent checkers, while supporting site teams with design queries. Developing the design team, initially working alongside engineering consultants and recruiting additional expertise as the function grows. Developing design as a commercial service in its own right, including helical pile design for both supply-only and supply-and-install clients. Working with the Managing Director and leadership team on technical strategy, pricing and opportunities to grow the business across the UK and Europe. What we're looking for A degree in civil, structural or geotechnical engineering, with typically eight or more years' relevant design experience, including checking the work of others. Strong geotechnical judgement, including interpreting ground investigation data, selecting design parameters and designing piles to Eurocode 7. Structural design experience to Eurocode 3, including bolted and welded connections, alongside experience specifying and interpreting pile load tests. A hands-on approach, with the ability and willingness to produce calculations, design packages and construction drawings personally. Experience explaining design decisions with clients and independent checkers, supported by clear technical writing skills. Chartered Engineer status (CEng MICE or MIStructE), or actively working towards chartership with a clear plan. Experience in piling, foundations, ground engineering or temporary works design would be advantageous. Screw pile or helical pile experience is useful but not essential. Experience with FEA software such as SolidWorks Simulation, Ansys or similar, particularly in assessing structural components, fabricated products and connections, would be beneficial. Experience establishing design procedures, technical standards or developing a small team would also be valuable. Above all, RADIX is looking for someone who combines sound engineering judgement with an entrepreneurial mindset. You'll be comfortable getting into the technical detail while also spotting opportunities, taking ownership and helping build something for the long term. RADIX can teach you about their product; they're looking for someone who brings the engineering expertise, initiative and ambition to help shape what comes next. Please apply directly to WE Talent who are managing the application process for this role WE Talent acts as an employment agency for permanent recruitment. We are committed to creating inclusive recruitment processes and welcome applications from people of all backgrounds.
Nov 22, 2026
Full time
Full job description Design and Engineering Manager RADIX £85,000-£95,000 + 10% bonus We're working exclusively with RADIX to recruit a Design and Engineering Manager, a key appointment as the business continues to grow and develop its design capability. Working alongside its existing engineering consultants, this is an opportunity to establish and lead the design function, combining hands-on geotechnical and structural engineering with the freedom to shape technical standards, build a team and develop design into a commercial service. RADIX is looking for someone who wants to make a genuine contribution to a growing business, take ownership of an important part of its future and grow with the company. For the right person, there is potential to progress into a wider leadership role, including the possibility of board-level involvement. What the role involves Designing screw pile foundations for renewable energy, infrastructure and building projects, including geotechnical and structural checks, load testing and durability. Producing and signing off complete design packages, including calculations, specifications and construction-ready drawings. Interpreting ground investigation data and load test results to inform design decisions and optimise foundation solutions. Setting technical standards and developing RADIX's design philosophy, calculation templates, reports and procedures. Taking the technical lead with clients, their engineers and independent checkers, while supporting site teams with design queries. Developing the design team, initially working alongside engineering consultants and recruiting additional expertise as the function grows. Developing design as a commercial service in its own right, including helical pile design for both supply-only and supply-and-install clients. Working with the Managing Director and leadership team on technical strategy, pricing and opportunities to grow the business across the UK and Europe. What we're looking for A degree in civil, structural or geotechnical engineering, with typically eight or more years' relevant design experience, including checking the work of others. Strong geotechnical judgement, including interpreting ground investigation data, selecting design parameters and designing piles to Eurocode 7. Structural design experience to Eurocode 3, including bolted and welded connections, alongside experience specifying and interpreting pile load tests. A hands-on approach, with the ability and willingness to produce calculations, design packages and construction drawings personally. Experience explaining design decisions with clients and independent checkers, supported by clear technical writing skills. Chartered Engineer status (CEng MICE or MIStructE), or actively working towards chartership with a clear plan. Experience in piling, foundations, ground engineering or temporary works design would be advantageous. Screw pile or helical pile experience is useful but not essential. Experience with FEA software such as SolidWorks Simulation, Ansys or similar, particularly in assessing structural components, fabricated products and connections, would be beneficial. Experience establishing design procedures, technical standards or developing a small team would also be valuable. Above all, RADIX is looking for someone who combines sound engineering judgement with an entrepreneurial mindset. You'll be comfortable getting into the technical detail while also spotting opportunities, taking ownership and helping build something for the long term. RADIX can teach you about their product; they're looking for someone who brings the engineering expertise, initiative and ambition to help shape what comes next. Please apply directly to WE Talent who are managing the application process for this role WE Talent acts as an employment agency for permanent recruitment. We are committed to creating inclusive recruitment processes and welcome applications from people of all backgrounds.
Adecco
Configuration Support
Adecco
Our client, a leader in the aerospace and defence industry, is seeking a dynamic Configuration Support professional to join their team at the Marston Green facility in Birmingham. This is an excellent opportunity for individuals looking to gain valuable experience in a highly regulated, safety-critical environment while working with cutting-edge technology. Summary: Start date: January 2027 Duration: 12 months Location: Marston Green, Birmingham Pay Rate: £18.27 per hour Hours: 37 hours per week Monday to Friday all onsite This role offers a unique chance to enhance practical skills in a dynamic business setting. The successful candidate will gain exposure to essential operational functions, develop problem-solving capabilities, and collaborate across various departments. Continuous improvement initiatives will provide a solid foundation for future career growth. Key Responsibilities: Maintain the technical library, ensuring documentation processing and issue status control are managed efficiently. Oversee Issue Status Registers for third-party sites, supporting the distribution and requests of up-issued documentation. Assist in technical document distribution and export management in line with export regulations. Conduct export classification of documentation (training will be provided). Manage technical data access controls, ensuring compliance with established procedures. Support the implementation of key document management projects and process improvements. Personal Attributes: Exceptional organisational skills with the ability to handle large volumes of data and documentation with precision. A logical, structured mindset with a strong commitment to following processes and attention to detail. Capable of interpreting complex data and identifying errors or non-compliance. An investigative mindset, comfortable asking the right questions and seeking clarification when needed. Ability to assess urgency, risk, and business impact to effectively prioritise workload. Proficient in digital tools such as databases, Word, Excel, and PDF writer. Strong interpersonal and communication skills to collaborate effectively with cross-functional teams. Self-motivated with the ability to prioritise tasks with minimal supervision. If you are ready to take on a challenging role in a leading organisation within the aerospace sector, this opportunity is for you! Don't miss out on the chance to contribute to vital projects while developing your career in configuration support. If you do not hear back after 5 working days, please assume that you have unfortunately been unsuccessful on this occasion. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explains how we will use your information - please copy and paste the following link in to your browser
Nov 22, 2026
Full time
Our client, a leader in the aerospace and defence industry, is seeking a dynamic Configuration Support professional to join their team at the Marston Green facility in Birmingham. This is an excellent opportunity for individuals looking to gain valuable experience in a highly regulated, safety-critical environment while working with cutting-edge technology. Summary: Start date: January 2027 Duration: 12 months Location: Marston Green, Birmingham Pay Rate: £18.27 per hour Hours: 37 hours per week Monday to Friday all onsite This role offers a unique chance to enhance practical skills in a dynamic business setting. The successful candidate will gain exposure to essential operational functions, develop problem-solving capabilities, and collaborate across various departments. Continuous improvement initiatives will provide a solid foundation for future career growth. Key Responsibilities: Maintain the technical library, ensuring documentation processing and issue status control are managed efficiently. Oversee Issue Status Registers for third-party sites, supporting the distribution and requests of up-issued documentation. Assist in technical document distribution and export management in line with export regulations. Conduct export classification of documentation (training will be provided). Manage technical data access controls, ensuring compliance with established procedures. Support the implementation of key document management projects and process improvements. Personal Attributes: Exceptional organisational skills with the ability to handle large volumes of data and documentation with precision. A logical, structured mindset with a strong commitment to following processes and attention to detail. Capable of interpreting complex data and identifying errors or non-compliance. An investigative mindset, comfortable asking the right questions and seeking clarification when needed. Ability to assess urgency, risk, and business impact to effectively prioritise workload. Proficient in digital tools such as databases, Word, Excel, and PDF writer. Strong interpersonal and communication skills to collaborate effectively with cross-functional teams. Self-motivated with the ability to prioritise tasks with minimal supervision. If you are ready to take on a challenging role in a leading organisation within the aerospace sector, this opportunity is for you! Don't miss out on the chance to contribute to vital projects while developing your career in configuration support. If you do not hear back after 5 working days, please assume that you have unfortunately been unsuccessful on this occasion. Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explains how we will use your information - please copy and paste the following link in to your browser
Reed
Finance Manager
Reed Witney, Oxfordshire
Are you a commercially minded finance professional looking for a leadership role where you can genuinely influence business performance? An established and growing business in West Oxfordshire is seeking an experienced Finance Manager to join its senior leadership team. This is a pivotal position offering the opportunity to lead a capable finance function while partnering closely with directors and stakeholders across the organisation to drive performance, improve processes and support future growth. This is far more than a traditional reporting role. You'll be at the heart of decision-making, providing meaningful financial insight, challenging assumptions, identifying opportunities and helping shape business strategy. As Financial Manager, you will take ownership of the finance function and play a key role in supporting the continued success of the business. You'll be responsible for delivering accurate financial information, developing the finance team and ensuring the business has the insight needed to make informed commercial decisions. Key responsibilities include: Leading the monthly management accounts process and providing insightful financial analysis. Delivering budgeting, forecasting and strategic planning activities. Producing meaningful KPI reporting and performance analysis for senior leadership. Partnering with directors and operational stakeholders to support decision-making and drive profitability. Reviewing and enhancing financial controls, systems and reporting processes. Managing, mentoring and developing a capable finance team. Analysing large volumes of financial and operational data to identify trends, risks and opportunities. Supporting inventory, stock and operational reporting where required. Contributing to continuous improvement initiatives across both finance and the wider business. You will be a confident finance leader who enjoys working closely with stakeholders across the business and combining technical expertise with commercial awareness. We're interested in speaking with candidates who have: ACA, ACCA or CIMA qualification, although strong qualified-by-experience candidates will also be considered. Previous experience as a Financial Controller, Finance Manager or in a similar senior finance leadership role. Proven experience managing, developing and motivating finance teams. Strong budgeting, forecasting and financial reporting expertise. Excellent business partnering and stakeholder management skills. Advanced Excel skills and confidence working with large and complex data sets. A proactive approach with the ability to identify improvements and drive change. Experience within manufacturing, engineering, distribution, FMCG or another operationally focused environment would be advantageous, as would exposure to stock accounting, inventory management or operational reporting. If you're looking for a role where you can combine leadership, commercial insight and hands-on financial control within a growing business, we'd love to hear from you. Apply today to find out more.
Nov 22, 2026
Full time
Are you a commercially minded finance professional looking for a leadership role where you can genuinely influence business performance? An established and growing business in West Oxfordshire is seeking an experienced Finance Manager to join its senior leadership team. This is a pivotal position offering the opportunity to lead a capable finance function while partnering closely with directors and stakeholders across the organisation to drive performance, improve processes and support future growth. This is far more than a traditional reporting role. You'll be at the heart of decision-making, providing meaningful financial insight, challenging assumptions, identifying opportunities and helping shape business strategy. As Financial Manager, you will take ownership of the finance function and play a key role in supporting the continued success of the business. You'll be responsible for delivering accurate financial information, developing the finance team and ensuring the business has the insight needed to make informed commercial decisions. Key responsibilities include: Leading the monthly management accounts process and providing insightful financial analysis. Delivering budgeting, forecasting and strategic planning activities. Producing meaningful KPI reporting and performance analysis for senior leadership. Partnering with directors and operational stakeholders to support decision-making and drive profitability. Reviewing and enhancing financial controls, systems and reporting processes. Managing, mentoring and developing a capable finance team. Analysing large volumes of financial and operational data to identify trends, risks and opportunities. Supporting inventory, stock and operational reporting where required. Contributing to continuous improvement initiatives across both finance and the wider business. You will be a confident finance leader who enjoys working closely with stakeholders across the business and combining technical expertise with commercial awareness. We're interested in speaking with candidates who have: ACA, ACCA or CIMA qualification, although strong qualified-by-experience candidates will also be considered. Previous experience as a Financial Controller, Finance Manager or in a similar senior finance leadership role. Proven experience managing, developing and motivating finance teams. Strong budgeting, forecasting and financial reporting expertise. Excellent business partnering and stakeholder management skills. Advanced Excel skills and confidence working with large and complex data sets. A proactive approach with the ability to identify improvements and drive change. Experience within manufacturing, engineering, distribution, FMCG or another operationally focused environment would be advantageous, as would exposure to stock accounting, inventory management or operational reporting. If you're looking for a role where you can combine leadership, commercial insight and hands-on financial control within a growing business, we'd love to hear from you. Apply today to find out more.
Field Service Engineer
The Curve Group Harlow, Essex
Garage Equipment Field Service Engineer Location : South Herts, North Essex & Outer North London We're looking for a motivated Field Service Engineer to service, diagnose and repair a wide range of garage equipment at customer sites. This is a great opportunity for an experienced garage equipment engineer or someone with transferable mechanical, electrical or electro-mechanical skills. Key Responsibilities: Service, diagnose and repair garage equipment, including vehicle lifts, wheel and tyre equipment, brake testers, gas analysers and smoke testers. Maintain accurate paperwork and follow health and safety procedures. Manage van stock to support First Time Fix targets. Deliver excellent customer service and high-quality workmanship. Develop technical skills and attend training as required. Work overtime when needed, with generous overtime pay. About You: Experience servicing garage equipment or working with mechanical, hydraulic, pneumatic or electrical equipment. Previous field service experience is advantageous. Good problem-solving skills and the ability to work independently. A customer-focused approach and a positive, can-do attitude. Basic PC and networking knowledge for equipment setup. Able to follow technical procedures and work to required standards. A full UK driving licence. What's on Offer? Competitive salary with a pay framework that rewards new skills. Company van, tools, PPE, phone and tablet provided. Generous overtime scheme, including paid travel time. 25 days' holiday plus bank holidays, increasing with service. Company pension scheme. Company sick pay and life assurance, increasing with service. Medicash healthcare plan. Employee Assistance Programme. Interested? Apply today to find out more about this opportunity. The Curve Group is a Recruitment Services and Human Resources business with a mission to transform the working lives of the people and organisations we work with. We collect and process your personal data for the purpose of providing recruitment and related HR services, in line with our legitimate business interests and legal obligations. We will retain your data for two years from the last point of contact, after which it will be securely deleted unless you request otherwise. For more details about how we handle your personal data and your rights, please see our full Privacy Policy on our website.
Nov 22, 2026
Full time
Garage Equipment Field Service Engineer Location : South Herts, North Essex & Outer North London We're looking for a motivated Field Service Engineer to service, diagnose and repair a wide range of garage equipment at customer sites. This is a great opportunity for an experienced garage equipment engineer or someone with transferable mechanical, electrical or electro-mechanical skills. Key Responsibilities: Service, diagnose and repair garage equipment, including vehicle lifts, wheel and tyre equipment, brake testers, gas analysers and smoke testers. Maintain accurate paperwork and follow health and safety procedures. Manage van stock to support First Time Fix targets. Deliver excellent customer service and high-quality workmanship. Develop technical skills and attend training as required. Work overtime when needed, with generous overtime pay. About You: Experience servicing garage equipment or working with mechanical, hydraulic, pneumatic or electrical equipment. Previous field service experience is advantageous. Good problem-solving skills and the ability to work independently. A customer-focused approach and a positive, can-do attitude. Basic PC and networking knowledge for equipment setup. Able to follow technical procedures and work to required standards. A full UK driving licence. What's on Offer? Competitive salary with a pay framework that rewards new skills. Company van, tools, PPE, phone and tablet provided. Generous overtime scheme, including paid travel time. 25 days' holiday plus bank holidays, increasing with service. Company pension scheme. Company sick pay and life assurance, increasing with service. Medicash healthcare plan. Employee Assistance Programme. Interested? Apply today to find out more about this opportunity. The Curve Group is a Recruitment Services and Human Resources business with a mission to transform the working lives of the people and organisations we work with. We collect and process your personal data for the purpose of providing recruitment and related HR services, in line with our legitimate business interests and legal obligations. We will retain your data for two years from the last point of contact, after which it will be securely deleted unless you request otherwise. For more details about how we handle your personal data and your rights, please see our full Privacy Policy on our website.
Kingscroft Professional Resources
Design Engineer
Kingscroft Professional Resources Halesowen, West Midlands
Are you a Design Engineer or Project Engineer with a background in Design Engineering and Product Development Are you confident with Design Engineering projects involving sheet metal, mechanical and electro-mechanical components. Can you help support wider cross functional teams working on design changes , creating and managing BOMs , using MRP systems and updating design data to ensure ongoing product success Kingscroft have been asked to recruit for a Design Engineer by a specialist manufacturing business. As the ideal candidate you will have experience of working in complex manufacturing environments creating designs of mainly mechanical systems and helping to control and deliver projects through engineering change and delivery phases. Our client is open to talking to candidates at all phases of their career and would encourage applications from engineering graduates and more experienced technical engineers. Daily Duties to Include: Product Design using 3D CAD Bill of materials maintenance within MRP system. New Bill of Materials generation within MRP System. New purchased part number set up . PCO (Product Change Order) generation, release and distribution for engineering related activities. Attend team meetings to understand workload and assist in priority request actioning. Liaise with cross functional teams to take on board information for action requests and also communicate out changes implemented to relevant teams. Support Continuous improvement activities Support NPI and NPD activities This is a fantastic opportunity to join a really well positioned organisation in a Design & Projects role that is central to helping deliver engineering projects. Please apply today for a confidential discussion on the role, the company and opportunity. By applying to this role, you will register as a candidate with Kingscroft Professional Resources. Our Privacy Policy explains how we will use your information.
Nov 22, 2026
Full time
Are you a Design Engineer or Project Engineer with a background in Design Engineering and Product Development Are you confident with Design Engineering projects involving sheet metal, mechanical and electro-mechanical components. Can you help support wider cross functional teams working on design changes , creating and managing BOMs , using MRP systems and updating design data to ensure ongoing product success Kingscroft have been asked to recruit for a Design Engineer by a specialist manufacturing business. As the ideal candidate you will have experience of working in complex manufacturing environments creating designs of mainly mechanical systems and helping to control and deliver projects through engineering change and delivery phases. Our client is open to talking to candidates at all phases of their career and would encourage applications from engineering graduates and more experienced technical engineers. Daily Duties to Include: Product Design using 3D CAD Bill of materials maintenance within MRP system. New Bill of Materials generation within MRP System. New purchased part number set up . PCO (Product Change Order) generation, release and distribution for engineering related activities. Attend team meetings to understand workload and assist in priority request actioning. Liaise with cross functional teams to take on board information for action requests and also communicate out changes implemented to relevant teams. Support Continuous improvement activities Support NPI and NPD activities This is a fantastic opportunity to join a really well positioned organisation in a Design & Projects role that is central to helping deliver engineering projects. Please apply today for a confidential discussion on the role, the company and opportunity. By applying to this role, you will register as a candidate with Kingscroft Professional Resources. Our Privacy Policy explains how we will use your information.
Honeywell Aerospace
Senior Configuration Engineer
Honeywell Aerospace Yeovil, Somerset
Be part of an engineering team that is defining the future of Honeywell Aerospace products. You will work closely with engineering leadership on managing data collection and processing, documenting product specifications and processes, and technical illustrations. You will help coordinate project planning and scheduling, act as a liaison between engineering groups, and provide data reporting for both internal and external customers. You will report directly to our Technical Supervisor, and you'll work out of our Yeovil, UK location on a hybrid work schedule. Join a company that's reintroducing itself to the aviation community we've helped advance for more than a century. At Honeywell Aerospace (NASDAQ: HONA), we're launching as an independent, publicly traded aerospace and defense company built on a legacy of operational excellence and mission-focused execution. Our new brand identity pairs that heritage with real momentum, as we build technology that helps pilots navigate with confidence, aircraft operate more efficiently, and operators stay ahead of change. With our systems on board 90% of the world's aircraft, your work here has reach that's rare to find anywhere else. Focusing on our customers, investing in innovation, and building a culture of accountability and performance is how we're shaping what comes next. Every horizon. Every mission. Every day. Honeywell Aerospace products and services are found on aircraft across commercial aviation, defense and space. We operate through three business areas: • Electronic Solutions develops the avionics, navigation systems, sensors and electromagnetic defense technology on board 90% of the world's aircraft • Engines & Power Systems provides the propulsion, auxiliary power and electrical systems that keep those aircraft flying • Control Systems supplies the thermal and motion control systems that support takeoff, landing and the safety of everyone on board With approximately 58,000 employees worldwide and net sales of $17.4B in 2025, we are also advancing systems for autonomous and supersonic platforms - bringing the same focus on safety and efficiency to the next era of flight. KEY RESPONSIBILITIES: • Implement and maintain robust configuration management processes. • Collaborate with cross-functional teams to resolve configuration issues • Provide guidance and support to engineering teams on configuration management best practices • Conduct configuration audits to verify compliance with requirements • Ensure changes to product configurations are properly documented, controlled, and communicated • Processing HW design data releases and changes • Ensuring the integrity of EBOM data as it transitions from PLM to SAP • Serving as a focal for HW CM process and tool related questions and issues to individuals within the organization • Identifying problems and coordinating fixes for HW CM related issues without the benefit of defined procedures • Communicating and influencing CMADS objectives and initiatives • Identifying opportunities for improvement with processes and tool functionality • Supporting/Leading problem resolution efforts including RCCA techniques to prevent recurrence Key Skills: • Bachelor's degree from an accredited institution in a technical discipline such as engineering or computer science or 5 years relevant experience • Extensive experience in configuration management in the aerospace industry • Strong knowledge of configuration management principles and best practices • Excellent analytical and problem-solving skills We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Join a team recognized for leadership, innovation, and diversity
Nov 22, 2026
Full time
Be part of an engineering team that is defining the future of Honeywell Aerospace products. You will work closely with engineering leadership on managing data collection and processing, documenting product specifications and processes, and technical illustrations. You will help coordinate project planning and scheduling, act as a liaison between engineering groups, and provide data reporting for both internal and external customers. You will report directly to our Technical Supervisor, and you'll work out of our Yeovil, UK location on a hybrid work schedule. Join a company that's reintroducing itself to the aviation community we've helped advance for more than a century. At Honeywell Aerospace (NASDAQ: HONA), we're launching as an independent, publicly traded aerospace and defense company built on a legacy of operational excellence and mission-focused execution. Our new brand identity pairs that heritage with real momentum, as we build technology that helps pilots navigate with confidence, aircraft operate more efficiently, and operators stay ahead of change. With our systems on board 90% of the world's aircraft, your work here has reach that's rare to find anywhere else. Focusing on our customers, investing in innovation, and building a culture of accountability and performance is how we're shaping what comes next. Every horizon. Every mission. Every day. Honeywell Aerospace products and services are found on aircraft across commercial aviation, defense and space. We operate through three business areas: • Electronic Solutions develops the avionics, navigation systems, sensors and electromagnetic defense technology on board 90% of the world's aircraft • Engines & Power Systems provides the propulsion, auxiliary power and electrical systems that keep those aircraft flying • Control Systems supplies the thermal and motion control systems that support takeoff, landing and the safety of everyone on board With approximately 58,000 employees worldwide and net sales of $17.4B in 2025, we are also advancing systems for autonomous and supersonic platforms - bringing the same focus on safety and efficiency to the next era of flight. KEY RESPONSIBILITIES: • Implement and maintain robust configuration management processes. • Collaborate with cross-functional teams to resolve configuration issues • Provide guidance and support to engineering teams on configuration management best practices • Conduct configuration audits to verify compliance with requirements • Ensure changes to product configurations are properly documented, controlled, and communicated • Processing HW design data releases and changes • Ensuring the integrity of EBOM data as it transitions from PLM to SAP • Serving as a focal for HW CM process and tool related questions and issues to individuals within the organization • Identifying problems and coordinating fixes for HW CM related issues without the benefit of defined procedures • Communicating and influencing CMADS objectives and initiatives • Identifying opportunities for improvement with processes and tool functionality • Supporting/Leading problem resolution efforts including RCCA techniques to prevent recurrence Key Skills: • Bachelor's degree from an accredited institution in a technical discipline such as engineering or computer science or 5 years relevant experience • Extensive experience in configuration management in the aerospace industry • Strong knowledge of configuration management principles and best practices • Excellent analytical and problem-solving skills We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Join a team recognized for leadership, innovation, and diversity
Trescal Limited
Calibration Engineer - HAVS Equipment
Trescal Limited
Are you an experienced Calibration Engineer with a focus on HAVS and seeking your next challenge? Join Trescal, the global leader in calibration services, and play a vital role in supporting our customers and driving excellence in measurement and compliance. With a strong commitment to sustainability and professional development, Trescal offers a supportive environment for your career progression. About the Role As a Calibration Engineer - HAVS at Trescal, you will be responsible for the calibration and measurement of Hand Arm Vibration Syndrome (HAVS) equipment in accordance with UKAS and company procedures, as well as customer and regulatory requirements. Your key responsibilities will include: Performing calibration of HAVS and related measurement equipment using approved procedures and good metrology practice. Maintaining accurate and auditable records of work, data, and results using our calibration management systems. Ensuring all calibration certificates and documentation are completed to the highest standard and in a timely manner. Participating in internal and external audits, supporting compliance with UKAS, ISO 17025, and client specifications. Providing technical advice and support to colleagues and customers as required. Assisting with the development and improvement of calibration procedures and processes within the laboratory. Conducting all duties in line with company Health and Safety policies and safe working practices. Supporting the wider engineering team and contributing to a customer-focused service environment. Undertaking additional reasonable duties as required by the role and career level. Benefits Competitive salary Continuous development and training plan 25 days holiday and the option to buy/sell days Flexible working options Access to the Trescal PerksHub Employee well-being programme Medical Health Cash Plan Pension and Life Assurance Scheme Cycle to work scheme Gym membership discounts Requirements Technical qualification such as HND, HNC, NVQ/BTEC Level 3 or above in Engineering or a related discipline. Previous experience working in a calibration environment, ideally with HAVS equipment or similar measurement instruments. Good understanding of calibration practices and metrology principles. Knowledge of UKAS, ISO 17025, or similar quality standards. Strong computer literacy, including experience with Windows-based systems and calibration management software. Excellent attention to detail and ability to maintain accurate records. Effective communication and interpersonal skills, with a customer-focused approach. Ability to work independently and as part of a team, managing your own workload. Commitment to upholding Trescal's values, including environmental sustainability and continuous improvement.
Nov 22, 2026
Full time
Are you an experienced Calibration Engineer with a focus on HAVS and seeking your next challenge? Join Trescal, the global leader in calibration services, and play a vital role in supporting our customers and driving excellence in measurement and compliance. With a strong commitment to sustainability and professional development, Trescal offers a supportive environment for your career progression. About the Role As a Calibration Engineer - HAVS at Trescal, you will be responsible for the calibration and measurement of Hand Arm Vibration Syndrome (HAVS) equipment in accordance with UKAS and company procedures, as well as customer and regulatory requirements. Your key responsibilities will include: Performing calibration of HAVS and related measurement equipment using approved procedures and good metrology practice. Maintaining accurate and auditable records of work, data, and results using our calibration management systems. Ensuring all calibration certificates and documentation are completed to the highest standard and in a timely manner. Participating in internal and external audits, supporting compliance with UKAS, ISO 17025, and client specifications. Providing technical advice and support to colleagues and customers as required. Assisting with the development and improvement of calibration procedures and processes within the laboratory. Conducting all duties in line with company Health and Safety policies and safe working practices. Supporting the wider engineering team and contributing to a customer-focused service environment. Undertaking additional reasonable duties as required by the role and career level. Benefits Competitive salary Continuous development and training plan 25 days holiday and the option to buy/sell days Flexible working options Access to the Trescal PerksHub Employee well-being programme Medical Health Cash Plan Pension and Life Assurance Scheme Cycle to work scheme Gym membership discounts Requirements Technical qualification such as HND, HNC, NVQ/BTEC Level 3 or above in Engineering or a related discipline. Previous experience working in a calibration environment, ideally with HAVS equipment or similar measurement instruments. Good understanding of calibration practices and metrology principles. Knowledge of UKAS, ISO 17025, or similar quality standards. Strong computer literacy, including experience with Windows-based systems and calibration management software. Excellent attention to detail and ability to maintain accurate records. Effective communication and interpersonal skills, with a customer-focused approach. Ability to work independently and as part of a team, managing your own workload. Commitment to upholding Trescal's values, including environmental sustainability and continuous improvement.
Morgan McKinley
Principal FPGA Design Engineer - Oxfordshire
Morgan McKinley Oxford, Oxfordshire
Role: Principal FPGA Design Engineer Location: Oxfordshire Package: £80k - £120k + Bonus + Generous Benefits About the Business: We are partnering with a pioneering UK technology innovator developing next-generation medical device technologies. Operating globally, they combine hardware, custom silicon, and complex data processing to transform global healthcare and scientific research. Role Overview: A hands-on technical leadership and mentorship position, owning the architecture and delivery of high-throughput FPGA subsystems. You will drive designs across the full lifecycle-from initial requirements through RTL implementation, custom-ASIC bring-up, lab validation, and product release. Key Responsibilities: System Architecture: Lead FPGA subsystem architecture for complex data platforms. RTL & Verification: Design/verify digital RTL (SystemVerilog/Verilog) using AMD/Xilinx toolchains. Optimization: Maximize throughput, power efficiency, resource usage, and timing closure. Integration: Collaborate with ASIC, FW, and SW teams to support board bring-up. Leadership: Champion CI/CD automation and mentor mid/senior hardware engineers. What We Need: Proven full-lifecycle FPGA design experience (architecture to hardware bring-up). Strong SystemVerilog/Verilog skills with AMD/Xilinx toolchains (Vivado/Questa). Hands-on experience with high-speed interfaces (PCIe/DMA) and lab debugging tools. Scripting for workflow automation (Python, Tcl, Make). Degree in Electronic Engineering or equivalent industry background. Apply: Interested in leading core architecture on high-impact technology? Apply with your CV today for a confidential discussion.
Nov 22, 2026
Full time
Role: Principal FPGA Design Engineer Location: Oxfordshire Package: £80k - £120k + Bonus + Generous Benefits About the Business: We are partnering with a pioneering UK technology innovator developing next-generation medical device technologies. Operating globally, they combine hardware, custom silicon, and complex data processing to transform global healthcare and scientific research. Role Overview: A hands-on technical leadership and mentorship position, owning the architecture and delivery of high-throughput FPGA subsystems. You will drive designs across the full lifecycle-from initial requirements through RTL implementation, custom-ASIC bring-up, lab validation, and product release. Key Responsibilities: System Architecture: Lead FPGA subsystem architecture for complex data platforms. RTL & Verification: Design/verify digital RTL (SystemVerilog/Verilog) using AMD/Xilinx toolchains. Optimization: Maximize throughput, power efficiency, resource usage, and timing closure. Integration: Collaborate with ASIC, FW, and SW teams to support board bring-up. Leadership: Champion CI/CD automation and mentor mid/senior hardware engineers. What We Need: Proven full-lifecycle FPGA design experience (architecture to hardware bring-up). Strong SystemVerilog/Verilog skills with AMD/Xilinx toolchains (Vivado/Questa). Hands-on experience with high-speed interfaces (PCIe/DMA) and lab debugging tools. Scripting for workflow automation (Python, Tcl, Make). Degree in Electronic Engineering or equivalent industry background. Apply: Interested in leading core architecture on high-impact technology? Apply with your CV today for a confidential discussion.

Modal Window

  • Home
  • Contact
  • About Us
  • Terms & Conditions
  • Privacy
  • Employer
  • Post a Job
  • Search Resumes
  • Sign in
  • Job Seeker
  • Find Jobs
  • Create Resume
  • Sign in
  • Facebook
  • Twitter
  • Google Plus
  • LinkedIn
Parent and Partner sites: IT Job Board | Jobs Near Me | RightTalent.co.uk | Quantity Surveyor jobs | Building Surveyor jobs | Construction Recruitment | Talent Recruiter | Construction Job Board | Property jobs | myJobsnearme.com | Jobs near me
© 2008-2026 Jobsite Jobs | Designed by Web Design Agency