126 jobs found

Job Purpose: Support manufacturing engineering activities in one or a combination of the following areas of responsibilities: Production Process design Equipment/Tool design Quality & continuous Improvement Key Responsibilities : General and Task Management Support continuous improvement to enhance the capability of existing processes and remove waste. Investigate Engineering issues on the production line. Raise NCRs and WQN where appropriate and managing the process through to CIB and implementation on the production line. Review new Designs and raise Work Instructions to support the Production Team. Attend MRB to review and disposition parts. Attend CRB meetings to review Engineering Changes and provide implementation plans for revised or new product. Support jig and fixture design and tool design. Identify and justify capital equipment investment. Analyse downtime, identify trends and develop solutions. Ensure accuracy of manufacturing engineering procedures, documentation and systems data. Attend various meetings and report to the Senior Leadership Team and GM level when required. Produce written reports and make presentations. Perform root cause analysis (5 Why, 8Ds) to resolve problems permanently. Conduct risk assessments of processes and tasks relative to the value stream or central function. Travel may be requested to other companies within the AVIC Cabin Systems family. (This is not an exhaustive list of all responsibilities. The successful applicant will be expected to perform varying tasks as required by their line manager & the overall objectives of the organisation). Self-Management Support, comply and ensure complicity with Health & Safety regulations, the Company Handbook, Quality and Environmental standards, and all other Company policies and procedures Comply with the Health, Safety and Environmental Policies Proactively contribute to creating a good team atmosphere Anticipates and overcomes obstacles Makes useful links to arrive at insightful plans and solutions Embraces personal challenge Confident, rounded thinking Is self-aware Is resilient, optimistic and open to change Key Performance Measures: Safety Quality Cost Delivery Knowledge, Education, Skills and Experience Knowledge: Understanding of composite materials and manufacturing processes. Working knowledge of Airbus and or Boeing systems and processes. Good working knowledge of 2D and 3D CAD Good knowledge and experience of Failure Mode and Effect Analysis (FMEA), Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP), and Lean Manufacturing techniques would be beneficial Education & Professional experience: Manufacturing/Mechanical/Aeronautical Engineering degree or similar discipline is desirable. Previous experience in a similar environment, i.e. automotive or aerospace is beneficial but not essential. Engineering graduates will also be considered. Skills required: Self-supervising within the expectations of senior management Thorough understanding of manufacturing processes Understanding of engineering, scientific and other technical information Understanding of lean manufacturing Ability to work in a diverse and dynamic environment Planning and prioritising activities Good communication and interpersonal skills Ability to present data effectively Problem-solving skills Understanding of health and safety practices Team working and leading skills Analytical skills Negotiation skills Ability to effectively train people inside and outside their work group Distinguished record of creativity and innovation Develops and applies advanced technologies, engineering principles, theories and concepts Exercises comprehensive discretion in judgement and initiative in setting and implementing goals Ability to negotiate the most complex arrangements with groups and stakeholders Internal Relationships & Interactions: Manufacturing Engineering Manager, Engineers, Production Managers, Design Engineering, Quality Engineering, CNC Programmers, Master Assemblers, Maintenance Engineers External Relationships & Interactions: OEMs (Airbus, Boeing, etc) 3rd party resource, part, equipment or service providers

Job Description Manufacturing Engineer NPI Supply Chain - Defence Future Programmes Full Time Bristol Future Programmes is at the heart of securing the future growth of the Defence business. We are delivering tomorrows technology fast, by bringing together the company's best engineers, programme managers and business professionals. Working in partnership with Governments, primes and new technology companies across the globe, we deliver future solutions to meet the customers emerging requirements. In all areas these roles involve working with a range of key business stakeholders to support the delivery of key programme milestones thus enabling the delivery of our Defence Combat strategy for the next 50 years. An exciting opportunity for a Manufacturing Engineering NPI role is available within our Defence Future Programmes team. This role presents an exciting opportunity to be part of the Future Programmes Manufacturing Engineering team supporting the development of manufacturing processes. Reporting to the Design teams and line management you will be responsible for ensuring manufacturability of new products and be familiar with "Design for Manufacture". You will also be required to interact and manage relationships across various functions internally and externally, ranging from design teams within the sub-systems, to suppliers and onto directly influencing the customer and their requirements. You will also have experience of Product Introduction methodologies such as Advanced Product Quality Planning and Production Part Approval Process and will be working with external suppliers to create, define and implement several methods of manufacture for a range of future products. Rolls-Royce's customers and the company have entrusted us to deliver the future technologies, people, processes and programmes. Successful delivery of these programmes will ensure both the UK and Rolls-Royce retains combat capability, ensuring freedom of action for the UK and enabling the company to maintain our market share in the Naval, Defence Aero and combat markets. Future Programmes is looking for someone with drive, passion and commitment who can: Embrace agility - you will be able to respond quickly to challenges and be able to manage progress despite, missing, ambiguous, or changing requirements.Bold - you believe in yourself and the team to bravely push the boundaries and feel comfortable with 'failing fast' to pursue rapid knowledge capture.Pursue collaboration - you find strength in working with others, both inside and outside of our business, and value the diversity of people and perspectives.Seeks simplicity - you keep it simple and remove complexity, in how you communicate and the way you work. These roles provide you with a fantastic opportunity to Develop talent - Act as professional leader of the manufacturing engineering community within UK&I, ensuring required competences are in place and promoting the development and growth of the community. Support the Chief of Industrialisation with management of manufacturing engineering load/capacity plans and budgets for the UK&I Future Programmes business.Quality - Promote a culture of zero defects within the organisation. Support the application of build in quality techniques including APQP during product introduction. Ensure compliance to all relevant company, legislative and technical policies and standards.Create strategy - Contribute to the development of the manufacturing engineering strategy for the business, connecting strategy, design, supply chain, operations, technology and digital stakeholders along with technology partnerships and suppliers to create manufacturing technology and product introduction strategies and roadmaps.Collaboration & Knowledge Sharing - Operate as an active member of the Future Programmes and Global manufacturing engineering leadership team, supporting cross-project and cross-business collaboration, knowledge sharing, skills and process development to best utilise the available resources to deliver business needs and priorities.Build Relationships - Manage, develop and maintain effective relationships within internal and external supply chain, ensure the requirements are understood and maximised, coach when required to deliver a successful outcome in line with the requirements and commitment of Rolls-Royce. What You'll Be Doing Working as a Design ME within a project team to ensure that designs are suitable for manufacture at prototype level, moving towards solutions for industrialisationSupporting the assessment of supplier capability for existing and new sources working with those suppliers to develop manufacturing processes for hardware deliveryWorking pro-actively with new suppliers to ensure they can robustly meet our technical requirements, and their manufacturing processes are low risk Developing, maintaining, and enhancing manufacturing processes Working in conjunction with procurement and programme teams to proactively identify and address supply chain technical risks and drive continuous improvement activities Lead investigations into non-conforming material/ Product originating from the supply chain Identifying areas for improvements with internal and external processes, creating the business case for change Your skills and experiences: Manufacturing/Quality engineering experience in both Production Operations and NPI/Project based environmentsKnowledge of CNC machining in metallics: both conventional and non-conventionalKnowledge of fabrication techniquesKnowledge of metal forming processesDesign for Manufacture (DFM) and Design for Assembly (DFA) skillsetsKnowledge of inspection and measurement techniquesEffective stakeholder management and collaboration - experience of working and managing relationships with external suppliersThe ability to support investigations including root cause analysis methodologies Ability to constructively challenge and drive an improvement-based culture Desirable Aerospace or automotive experienceKnowledge of business improvement techniques and a certain amount of commercial acumenLean Six Sigma Green or Black BeltProject management awarenessTeam player, but at the same time a motivated self-starter that can demonstrate the ability to resolve problems and deliver solutions in a timely manner. Hardware on time and on cost Qualifications: Professionally Qualified Engineer (e.g. UK minimum HND/Foundation degree or another national equivalent).Recognised national or international engineering accreditation (e.g. UK IEng or CEng) where available.Demonstrated experience in manufacturing processes used within Aerospace (or an equivalent regulated industry) and process development methodologies (e.g. Advanced Product Quality Planning).Experience of other advanced or emerging manufacturing technology preferred but not essential. The role is Bristol based, but travel both in the UK and overseas may also be required on an occasional basis. To work for the Rolls-Royce Defence business an individual has to hold a Security Check clearance. Rolls-Royce will support the application for Security Clearance if you do not currently already have this in place. Due to the nature of work the business conducts and the protection of certain assets we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives which are crucial to innovation and problem solving. We believe the more diverse perspectives we have, the more successful we'll be. By building a culture of caring and belonging, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy at Our people Rolls-Royce Job Category Manufacturing Engineering Posting Date 07 Aug 2025; 00:08 Posting End Date 25 Aug 2025PandoLogic.

Customer Operations Coordinator Paying up to 33.50 p/h (Inside IR35) Location: Heathrow Work Pattern: Fully Onsite Duration: 12 months Hours: 37.5 hour working week Job Title: Customer Operations Coordinator Job Description: We are seeking a proactive and detail-oriented Customer Operations Coordinator to manage day-to-day operational activities for our aviation parts exchange program. This role serves as the primary point of contact for customer interactions and ensures smooth coordination across internal teams and external stakeholders. Key Responsibilities: Act as the customer's primary contact for daily operational needs and end-to-end transaction support. Coordinate the movement of parts through the exchange and return cycle, working with supply chain, freight forwarders, warehouse, and internal teams. Manage and reconcile customer inventory levels, ensuring alignment with contract and system accuracy. Oversee and facilitate the full customer returns process, including pool balancing, rejected returns, and proof of delivery. Identify and trigger late fee actions related to core returns. Resolve delivery issues such as damaged or incorrect parts, missing certifications, and misdirected shipments. Support root cause analysis and service level discussions with internal and partner stakeholders. Track and report customer-specific service level metrics; manage daily operational reporting cadence. Participate in regular customer review meetings (daily to quarterly). Support ordering and shipments for scheduled maintenance and defect resolution activities. Assist with audits and maintain customer MBK (Material By Kit) accuracy. Experience Benefits: Work in a diverse, global team environment (UK, Spain, Germany, US, Belgium). Direct engagement with both customers and suppliers. Gain insight into large-scale exchange program financial. Monthly exposure to executive leadership. Opportunity to lead change and continuous improvement efforts. Preferred Qualifications: Strong coordination, problem-solving, and communication skills across global, cross-functional teams. Background in supply chain, logistics, or aerospace operations preferred. Experience with ERP systems and data reconciliation. Comfortable working in a fast-paced, customer-facing environment. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Lead Software Developer Guildford Paying up to 70,000 (DOE) Please note that due to the nature of the work, you will need to be eligible to obtain a high level of UK security clearance - Please only apply if suitable. Responsibilities : Developing software for network security applications Developing novel signal, image, or data processing applications in C/C++ Developing user interfaces in HTML/Typescript/JavaScript Providing support and training to our customers in using the software Providing training, mentoring and leading other more junior team members Experience required: Hold a undergraduate degree or a PhD in a numerate discipline Ideally have 3 or more years software development experience, preferably in C/C++ Be familiar with using and configuring Linux systems. have experience in developing and maintaining complex real-world systems Have previously used source control systems such as subversion Understand the importance of clear, efficient software design Ideally have experience working in the in the Aerospace, Military or Defence sectors. Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Job Title: Senior Electrical Engineering Manager (Control & Instrumentation) Location: Barrow-in-Furness (Hybrid)We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Leading multidisciplinary teams of professional engineers tasked with delivering the Dreadnought C&I Systems Driving continued professional development and progression of individuals within the team Managing configuration and control of documents and requirements Overseeing a schedule to deliver programme deliverables Supporting Build and Test and Commissioning activities Managing system design change Acting as the focal point for system issues and project review assurance activities, and supporting the formal design review process Interfacing with the client, external partners, suppliers and other project stakeholders, including project management, supply chain and safety, resolving any issues with the appropriate stakeholders where required Your Skills and Experience: Degree in a relevant Engineering discipline or equivalent level Chartered Engineer Status or demonstrable equivalence and a willing to apply for and achieve CEng status Experience leading a team of engineers Complex control systems design experience in an industry such as Marine, Nuclear, Oil & Gas, Automotive, Aerospace Knowledge and experience of Safety Standards such as IEC 61508, IEC61511, DO 254, DO 178C Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The PMS C&I Team: As a Senior Engineering Manager, you will have delivery responsibility across the Dreadnought Control and Instrumentation Systems including but not limited to Consoles, Platform Instrumentation, C&I Parts and Hardware Ancillaries. You will be helping to define and shape the design of the Royal Navy's next generation attack class submarine whilst collaborating with colleagues, wider stakeholders, suppliers, and the Royal Navy. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems: This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 19th August 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Senior Electrical Engineering Manager (Control & Instrumentation) Location: Barrow-in-Furness (Hybrid)We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Leading multidisciplinary teams of professional engineers tasked with delivering the Dreadnought C&I Systems Driving continued professional development and progression of individuals within the team Managing configuration and control of documents and requirements Overseeing a schedule to deliver programme deliverables Supporting Build and Test and Commissioning activities Managing system design change Acting as the focal point for system issues and project review assurance activities, and supporting the formal design review process Interfacing with the client, external partners, suppliers and other project stakeholders, including project management, supply chain and safety, resolving any issues with the appropriate stakeholders where required Your Skills and Experience: Degree in a relevant Engineering discipline or equivalent level Chartered Engineer Status or demonstrable equivalence and a willing to apply for and achieve CEng status Experience leading a team of engineers Complex control systems design experience in an industry such as Marine, Nuclear, Oil & Gas, Automotive, Aerospace Knowledge and experience of Safety Standards such as IEC 61508, IEC61511, DO 254, DO 178C Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The PMS C&I Team: As a Senior Engineering Manager, you will have delivery responsibility across the Dreadnought Control and Instrumentation Systems including but not limited to Consoles, Platform Instrumentation, C&I Parts and Hardware Ancillaries. You will be helping to define and shape the design of the Royal Navy's next generation attack class submarine whilst collaborating with colleagues, wider stakeholders, suppliers, and the Royal Navy. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems: This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 19th August 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Network Systems Engineer Location: Frimley, Surrey - Hybrid - 3+ days on-site per week Role Type: Permanent Salary: 55,000 - 61,500 per annum depending on experience Our client, an established aerospace engineering firm, require an experienced Network Systems Engineer to join their multi-disciplined team. This role would require UK Eyes Only SC Clearance. Please note we can only consider sole UK Nationals (no dual nationalities) As part of a medium-sized core team of 6-12, you'll also collaborate with a wider group of around 30, engaging with a broad stakeholder network. This role demands strong technical leadership, owning challenges, proactively solving problems, and working with the right stakeholders to drive solutions forward. What the role of the Network Systems Engineer entails: Some of the main duties of the Network Systems Engineer will include: Provide oversight and technical ownership of design, leading design decisions and supporting the Engineering Manager in delivering in-service programmes Ensure technical leadership by controlling project scope, managing design changes, and engaging stakeholders and suppliers to identify risks early Lead programme-level design reviews, coordinate stakeholders, manage design baselines and voids, and produce Certificates of Design while ensuring design governance Review and influence technical requirements and architectural design to ensure system integration, covering sub-systems and specialist domains for subcontractor design, development, and qualification Provide specialist knowledge and subject matter expertise in the integration, validation and verification of systems What experience you need to be the successful Network Systems Engineer: Essential: Extensive experience in network or software engineering, ideally with a background in operations Ability to take the lead on technical matters and provide expert guidance Chartered Engineer status or working towards Specialist expertise in Combat Systems, particularly in relation to submarines or marine engineering projects, would be advantageous Familiarity with DOORS and prior hands-on experience using it Proven experience in change management processes Desirable: Systems Engineering (INCOSE) qualifications This really is a fantastic opportunity for a Network Systems Engineer to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.

SMT Operator 12 month contract Based in Stevenage Offering 26ph Inside IR35 Are you experienced working to IPC 610 standards? Do you have experience working on Circuit Card Assembly? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the SMT Operator, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Responsible for carrying out machine manufacturing and self-certification tasks Hand soldering Circuit Card Assemblies to IPC 610 & 001 Fine soldering under magnification Surface mount and through-hole component assembly Undertake detailed standard assembly/manufacturing activities Operations of equipment, to build circuit card assemblies including; DEK screen print machine, MyCronic Pick and place machine, ERSA reflow solder oven, Koh Young Automated optical inspection Your skillset may include: Knowledge of circuit card assembly Read and interpret layouts ESD training PC literate Hand soldering Circuit Card Assemblies to IPC 610 & 001 Fine soldering under magnification Surface mount and through-hole component assembly Undertake detailed standard assembly/manufacturing activities If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! SMT Operator 12 month contract Based in Stevenage Offering 26ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Job Title: Senior Electrical Engineering Manager (Control & Instrumentation) Location: Barrow-in-Furness (Hybrid)We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Leading multidisciplinary teams of professional engineers tasked with delivering the Dreadnought C&I Systems Driving continued professional development and progression of individuals within the team Managing configuration and control of documents and requirements Overseeing a schedule to deliver programme deliverables Supporting Build and Test and Commissioning activities Managing system design change Acting as the focal point for system issues and project review assurance activities, and supporting the formal design review process Interfacing with the client, external partners, suppliers and other project stakeholders, including project management, supply chain and safety, resolving any issues with the appropriate stakeholders where required Your Skills and Experience: Degree in a relevant Engineering discipline or equivalent level Chartered Engineer Status or demonstrable equivalence and a willing to apply for and achieve CEng status Experience leading a team of engineers Complex control systems design experience in an industry such as Marine, Nuclear, Oil & Gas, Automotive, Aerospace Knowledge and experience of Safety Standards such as IEC 61508, IEC61511, DO 254, DO 178C Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The PMS C&I Team: As a Senior Engineering Manager, you will have delivery responsibility across the Dreadnought Control and Instrumentation Systems including but not limited to Consoles, Platform Instrumentation, C&I Parts and Hardware Ancillaries. You will be helping to define and shape the design of the Royal Navy's next generation attack class submarine whilst collaborating with colleagues, wider stakeholders, suppliers, and the Royal Navy. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems: This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 19th August 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Senior Electrical Engineering Manager (Control & Instrumentation) Location: Barrow-in-Furness (Hybrid)We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Leading multidisciplinary teams of professional engineers tasked with delivering the Dreadnought C&I Systems Driving continued professional development and progression of individuals within the team Managing configuration and control of documents and requirements Overseeing a schedule to deliver programme deliverables Supporting Build and Test and Commissioning activities Managing system design change Acting as the focal point for system issues and project review assurance activities, and supporting the formal design review process Interfacing with the client, external partners, suppliers and other project stakeholders, including project management, supply chain and safety, resolving any issues with the appropriate stakeholders where required Your Skills and Experience: Degree in a relevant Engineering discipline or equivalent level Chartered Engineer Status or demonstrable equivalence and a willing to apply for and achieve CEng status Experience leading a team of engineers Complex control systems design experience in an industry such as Marine, Nuclear, Oil & Gas, Automotive, Aerospace Knowledge and experience of Safety Standards such as IEC 61508, IEC61511, DO 254, DO 178C Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The PMS C&I Team: As a Senior Engineering Manager, you will have delivery responsibility across the Dreadnought Control and Instrumentation Systems including but not limited to Consoles, Platform Instrumentation, C&I Parts and Hardware Ancillaries. You will be helping to define and shape the design of the Royal Navy's next generation attack class submarine whilst collaborating with colleagues, wider stakeholders, suppliers, and the Royal Navy. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems: This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 19th August 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Senior Electrical Engineering Manager (Control & Instrumentation) Location: Barrow-in-Furness (Hybrid)We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Leading multidisciplinary teams of professional engineers tasked with delivering the Dreadnought C&I Systems Driving continued professional development and progression of individuals within the team Managing configuration and control of documents and requirements Overseeing a schedule to deliver programme deliverables Supporting Build and Test and Commissioning activities Managing system design change Acting as the focal point for system issues and project review assurance activities, and supporting the formal design review process Interfacing with the client, external partners, suppliers and other project stakeholders, including project management, supply chain and safety, resolving any issues with the appropriate stakeholders where required Your Skills and Experience: Degree in a relevant Engineering discipline or equivalent level Chartered Engineer Status or demonstrable equivalence and a willing to apply for and achieve CEng status Experience leading a team of engineers Complex control systems design experience in an industry such as Marine, Nuclear, Oil & Gas, Automotive, Aerospace Knowledge and experience of Safety Standards such as IEC 61508, IEC61511, DO 254, DO 178C Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The PMS C&I Team: As a Senior Engineering Manager, you will have delivery responsibility across the Dreadnought Control and Instrumentation Systems including but not limited to Consoles, Platform Instrumentation, C&I Parts and Hardware Ancillaries. You will be helping to define and shape the design of the Royal Navy's next generation attack class submarine whilst collaborating with colleagues, wider stakeholders, suppliers, and the Royal Navy. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems: This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 19th August 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Senior Electrical Engineering Manager (Control & Instrumentation) Location: Barrow-in-Furness (Hybrid)We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Leading multidisciplinary teams of professional engineers tasked with delivering the Dreadnought C&I Systems Driving continued professional development and progression of individuals within the team Managing configuration and control of documents and requirements Overseeing a schedule to deliver programme deliverables Supporting Build and Test and Commissioning activities Managing system design change Acting as the focal point for system issues and project review assurance activities, and supporting the formal design review process Interfacing with the client, external partners, suppliers and other project stakeholders, including project management, supply chain and safety, resolving any issues with the appropriate stakeholders where required Your Skills and Experience: Degree in a relevant Engineering discipline or equivalent level Chartered Engineer Status or demonstrable equivalence and a willing to apply for and achieve CEng status Experience leading a team of engineers Complex control systems design experience in an industry such as Marine, Nuclear, Oil & Gas, Automotive, Aerospace Knowledge and experience of Safety Standards such as IEC 61508, IEC61511, DO 254, DO 178C Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The PMS C&I Team: As a Senior Engineering Manager, you will have delivery responsibility across the Dreadnought Control and Instrumentation Systems including but not limited to Consoles, Platform Instrumentation, C&I Parts and Hardware Ancillaries. You will be helping to define and shape the design of the Royal Navy's next generation attack class submarine whilst collaborating with colleagues, wider stakeholders, suppliers, and the Royal Navy. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems: This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 19th August 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Senior Electrical Engineering Manager (Control & Instrumentation) Location: Barrow-in-Furness (Hybrid)We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Leading multidisciplinary teams of professional engineers tasked with delivering the Dreadnought C&I Systems Driving continued professional development and progression of individuals within the team Managing configuration and control of documents and requirements Overseeing a schedule to deliver programme deliverables Supporting Build and Test and Commissioning activities Managing system design change Acting as the focal point for system issues and project review assurance activities, and supporting the formal design review process Interfacing with the client, external partners, suppliers and other project stakeholders, including project management, supply chain and safety, resolving any issues with the appropriate stakeholders where required Your Skills and Experience: Degree in a relevant Engineering discipline or equivalent level Chartered Engineer Status or demonstrable equivalence and a willing to apply for and achieve CEng status Experience leading a team of engineers Complex control systems design experience in an industry such as Marine, Nuclear, Oil & Gas, Automotive, Aerospace Knowledge and experience of Safety Standards such as IEC 61508, IEC61511, DO 254, DO 178C Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The PMS C&I Team: As a Senior Engineering Manager, you will have delivery responsibility across the Dreadnought Control and Instrumentation Systems including but not limited to Consoles, Platform Instrumentation, C&I Parts and Hardware Ancillaries. You will be helping to define and shape the design of the Royal Navy's next generation attack class submarine whilst collaborating with colleagues, wider stakeholders, suppliers, and the Royal Navy. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems: This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 19th August 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Job Title: Senior Electrical Engineering Manager (Control & Instrumentation) Location: Barrow-in-Furness (Hybrid)We offer a range of hybrid and flexible working arrangements - please speak to your recruiter about the options for this particular role Salary: Negotiable depending on experience What you'll be doing: Leading multidisciplinary teams of professional engineers tasked with delivering the Dreadnought C&I Systems Driving continued professional development and progression of individuals within the team Managing configuration and control of documents and requirements Overseeing a schedule to deliver programme deliverables Supporting Build and Test and Commissioning activities Managing system design change Acting as the focal point for system issues and project review assurance activities, and supporting the formal design review process Interfacing with the client, external partners, suppliers and other project stakeholders, including project management, supply chain and safety, resolving any issues with the appropriate stakeholders where required Your Skills and Experience: Degree in a relevant Engineering discipline or equivalent level Chartered Engineer Status or demonstrable equivalence and a willing to apply for and achieve CEng status Experience leading a team of engineers Complex control systems design experience in an industry such as Marine, Nuclear, Oil & Gas, Automotive, Aerospace Knowledge and experience of Safety Standards such as IEC 61508, IEC61511, DO 254, DO 178C Benefits: As well as a competitive pension scheme, BAE Systems also offers employee share plans, an extensive range of flexible discounted health, wellbeing and lifestyle benefits, including a green car scheme, private health plans and shopping discounts - you may also be eligible for an annual incentive. The PMS C&I Team: As a Senior Engineering Manager, you will have delivery responsibility across the Dreadnought Control and Instrumentation Systems including but not limited to Consoles, Platform Instrumentation, C&I Parts and Hardware Ancillaries. You will be helping to define and shape the design of the Royal Navy's next generation attack class submarine whilst collaborating with colleagues, wider stakeholders, suppliers, and the Royal Navy. We offer relocation support packages across all Submarines roles, subject to meeting eligibility criteria. Why BAE Systems: This is a place where you'll be able to make a real difference. You'll be part of an inclusive culture that values diversity of thought, rewards integrity, and merit, and where you'll be empowered to fulfil your potential. We welcome people from all backgrounds and want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition (for example dyslexia, autism, an anxiety disorder etc.) that may affect your performance in certain assessment types, please speak to your recruiter about potential reasonable adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 19th August 2025 We reserve the right to close this vacancy early if we receive sufficient applications for the role. Therefore, if you are interested, please submit your application as early as possible.

Project Manager (Operational Excellence) Are you a seasoned Project Manager with a passion for driving continuous improvement and operational efficiency? If so, this incredible opportunity to join a leading aerospace company as a Project Manager (Operational Excellence) could be the perfect next step in your career. Brize Norton Monday - Friday 12 Month Contract PAYE or Umbrella rates available About the Role As the Project Manager (Operational Excellence) , you will be responsible for delivering projects within time, scope, cost, and quality objectives to ensure customer satisfaction. This dynamic role involves managing project stakeholder relationships, customer expectations, and requirements, as well as integrating lessons learned from previous projects. Your ultimate goal will be to lead Operational Excellence System (OES) projects that drive continuous improvement and operational efficiency within the organisation. Key Responsibilities Lead Operational Excellence System (OES) projects, including timelines, resource allocation, and performance metrics to drive continuous improvement and operational efficiency. Achieve project objectives (time, scope, cost, quality) to customer satisfaction in compliance with internal and external rules and regulations. Define, implement, and drive a project team/organisation throughout all project phases, including managing people from other functions in a matrix organisation. Ensure effective integration of lessons learned from previous projects. Manage risks, opportunities, and contracts (internal or external) proactively. Oversee the effective management of partners and suppliers. Monitor and report on the progress and outcomes of the projects, ensuring alignment with organisational goals and objectives. Required Qualifications and Experience Proven experience as a Project Manager in the aerospace industry, preferably with a focus on Operational Excellence projects. Bachelor's degree in a relevant field (e.g., Engineering, Business Administration, or a related discipline). Recognised Project Management certifications (e.g., PMP, PRINCE2, etc.). Proficiency in MS Project or similar project management software. Experience with Agile methodologies. Experience with change management and leading organisational change initiatives. Why Join This Company? This company is a leader in the aerospace industry, known for its commitment to innovation, excellence, and employee development. As a Project Manager (Operational Excellence) , you'll have the opportunity to work on cutting-edge projects, collaborate with talented professionals, and contribute to the company's continued success. Additionally, the company offers a competitive salary, excellent benefits, and a supportive, inclusive work environment. Apply Now Carbon60, Lorien & SRG - The Impellam Group STEM Portfolio are acting as an Employment Business in relation to this vacancy.

Engineering Business Manager - Electronics 6 month contract Based in Stevenage Offering circa 60ph Inside IR35 Do you have experience managing functional budgets? Do you have experience analysing financial data? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Engineering Business Manager, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Responsible for the management of the 2025 electronic engineering budget working with the Heads of Capability and other leaders within the Electronic Engineering Function. Be involved with the Electronic Engineering Asset Management activities Leadership of the management of all functional budgets (Capital, Non-Payroll, Functional Projects) through 2025 and into 2026 Preparation of Local Operating Process guides to define and ensure consistency in how functional budgets are utilised across all capabilities and delivery teams Conduct financial data analysis to identify trends, variances, and areas for improvement Support Governance and Business Operation strategic improvement actions led by others within the Future Technology & Governance team Electronic Engineering stakeholder management - Deputy Director, Heads of Capability, Future Technology & Governance Team Wider stakeholder management - Finance, Site Management Team Your skillset may include: Excellent attention to detail and organisations skills Effective communication and interpersonal skills Ability to work independently and as part of a team Good understanding of Finance (General Ledger Accounts, Capital) If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Engineering Business Manager - Electronics 6 month contract Based in Stevenage Offering circa 60ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

On behalf of our client, we are looking for a Test Technician to join them on a permanent basis. Reporting to the Manufacturing, Assembly, Integration and Test Manager, the role holder will be responsible for testing the portfolio of products. This will include the scheduling conducting and writing up testing activities as detailed in the test procedures. Role: Test Technician Pay: Competitive Location: Harwell, Oxfordshire Hours: Monday- Friday, 37.5 hrs/ week Status : Permanent Security Clearance: BPSS Key Responsibilities Work with our Test Engineer and MAIT team across our product portfolio to test products for mechanical and thermal sub-system and system level functionality, safety, capabilities, compliance and performance Conduct electrical, RF, mechanical, thermal, thermal vacuum and vibration testing in accordance with the test protocol created by the Chief Engineering team. Responsible for preparing and conducting prescribed tests Assemble test setups, thermal, mechanical, RF and electronic/electrical, Responsible for the safe operation of the test equipment and hardware. Support the creation and maintenance of the operational procedures relevant to the test equipment Compile reports on findings and the testing data that has been collected providing recommendations and advice on the data as needed Maintaining and testing equipment regularly to ensure remains in good working order Writing test procedures and test protocols as required by the project / MAIT teams. Implement changes in test protocols as and when needed Make recommendations either at a technical or procedural level to improve test processes Build effective relationships with external test houses and attend suppliers to support external test needs Qualifications, Skills & Experience Essential Demonstrative experience as test technician ideally in a regulated industry (Space, Nuclear, Aerospace, Automotive) Proficient in test procedures and protocols Report writing and document analysis skills Knowledge of testing equipment, specifically - Thermal vacuum chambers, thermal chamber, laser scanner, tensile pull tester Excellent communication skills and proficient with MS Office, including Outlook, PowerPoint, Word, Excel. Excellent team player with the ability to build effective relationships at all levels Proactive and innovative approach to problem solving presenting findings and solutions Ability to plan and organise workload across multiple projects ensuring deadlines are met Quality mindset with excellent attention to detail Flexible approach to working hours as there may be occasional need for out of hours working due to test schedules and monitoring of ongoing tests. Desirable Knowledge of testing equipment, specifically RF vector analyser, and data loggers (including thermocouples, accelerometers) Modal testing and photogrammetry.

A leading Defence client of ours based in Bedfordshire is in the market for Mechanical Design Engineer to join on an initial 6-month contract. As the Mechanical Design Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: Use requirements specifications and a design brief to develop innovative yet robust design solutions Use CREO Parametric CAD to produce both concept and detail designs Produce supporting calculations and analysis to justify design decisions Work with SMEs, Users and Lethality/Physical Design Authorities to develop concept design solutions Work with CAD engineers to enable the production of drawings and design data pack Create and present Design Review data packs Assist with the production of prototypes and confirm designs with manufacturing/purchasing teams Perform physical testing and design-proving activities on engineering prototypes Your skillset may include: Experience in the design and development of mechanical products Experience of working within the defence industry. Candidates from an aerospace-focused background or expertise with working with Armoured Fighting Vehicles will be a huge advantage. In-depth working knowledge of CREO CAD software and experience using the tool to produce designs Windchill PDM Extensive knowledge of complex mechanism design and principles Ability to perform basic structural and kinematic calculations Experience in successful design and product development for use in harsh environments If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further or alternatively, please contact Lewis on (phone number removed) or Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.