254 jobs found

Multi-Skilled Maintenance Engineer (Electrical Bias) Corporate site, Central London Your new company A leading global service provider in the Facilities Management & Maintenance sector. Delivering maintenance services to a corporate client in central London Your new role Undertake maintenance and reactive activity to a wide range of Electrical Building Services equipment including but not limited to, LV systems, general lighting, building controls, small power and distribution, BMS systems, motors, pumps and other equipment found in modern commercial/industrial premises.Undertake within your levels of competency, inspection and reactive activity wide range of Mechanical & Electrical Building Services equipment including but not limited to, heating boilers, pumps, compressed air systems, sanitary ware, fan coil and air handling units and BMS systems and other equipment found in modern commercial/industrial premises.Be an essential part of the local team who will ensure the safe operation and repair of all M&E building services and fabric equipment on the site.Take part in a rota to provide a reactive maintenance service over an extended dayWorking in line with the Permit to Work System SOP.To implement systems that will ensure plant is maintained and operated to its optimum efficiency.Participate in departmental energy saving schemes and promote the understanding and importance of the economic use of energy.Monitor site performance of subcontractors and report poor performance. Use of IT systems (handheld device) as part of the CMMS system Maximo.Work in line with issued Risk Assessments and Safe Systems of Work. What you'll need to succeed C&G 2382-12 (18th Edition BS7671:2008) ideally with C&G 2391 Inspection & TestingIOSH Passport or CSCS CardHND or NVQ in building services or equivalent in a relevant subject5 years experience in electrical building services and plant engineering with a good around working knowledge of mechanical systems. What you'll get in return An initial interim assignment with the potential to transfer to permanent contract What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. #

Mobile Multi-Skilled Engineer (Elec or HVAC) - Northwest England Job ID 178854 Posted 16-Jul-2025 Role type Full-time Areas of Interest Engineering/Maintenance Location(s) Liverpool - England - United Kingdom of Great Britain and Northern Ireland, Manchester - England - United Kingdom of Great Britain and Northern Ireland Mobile Engineer (Electrical or HVAC Bias) Company Profile CBRE is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 100,000 employees and operate in 48 countries. Job Purpose The purpose of the role is: CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Mobile Engineer to join the team located at sites across the Northwest of England between Liverpool and Manchester. The successful candidate will be responsible to ensure all environmental conditions are always maintained about critical building systems and to carry out Planned Preventative Maintenance (PPM), reactive and breakdown works to all mechanical and electrical systems within the sites. Key Responsibilities: To deliver the following: To travel to sites across the advertised locations. Full UK driving license required. Ensure that routine PPM (to SFG 20) is carried out to all mechanical and electrical plant in accordance with Site task schedules and asset lists. Ensure that reactive tasks throughout the building are completed and be proactive in highlighting areas where improvements can be made. These reactive calls to also include concessionary stores and fabric related items. Ensure that plant faults and defects are swiftly remedied to always maintain plant in serviceable order. Ensure that suitable spares are available to carry out both maintenance and reactive works. To provide parts lists and estimated timescales to carry out remedial works. Ensure that all relevant paperwork is completed regarding PPM, reactive and breakdown works and that it is passed without delay to the contract administrator. Ensure that Method Statements and Risk Assessments are prepared and used for all tasks undertaken to always ensure safe working practices. To develop a good working relationship with all members of CBRE staff, subcontractors and the client representatives. Ensure the provision of a Safe and Healthy working environment. To include the wearing of uniform and PPE at all times. Ensure the professional image of CBRE Managed Services is presented at all times. Ensure up to date shift logs are kept at all times. Ensure that all plant rooms under the responsibility of CBRE Managed services are always locked and are kept in a clean and tidy condition. Supervising and monitoring of sub-contractors works whilst they are on site undertaking maintenance. To arrange and provide holiday and sickness cover at short notice and be flexible in their working patterns. To undertake lone working when and where required, subject to passing satisfactory training. Ensure assigned tasks are actioned and completed as appropriate. To ensure tasks as directed are completed with the appropriate H&S awareness/implementation. Ensure an awareness and compliance to the contractual KPI's/SLA's. Ensure Computer Based Maintenance system, SI LOCAL, is kept up to date and that PPM and reactive tickets are closed out with accurate data captured. To operate a Permit to Work System in accordance with CBRE Quality, Health & Safety procedures, and client requirements. To provide holiday and emergency cover as required, potentially at sites not normally covered. Any other task as directed by the account management team. Qualifications: Education A good basic education is essential, with good written and spoken English. Basic Mathematics skills. CITY AND GUILDS qualification in a relevant field. Skills Committed to the delivery of excellent customer service. Calm manner, able to work under pressure. Able to make sound decisions when needed. Physically fit and able to carry tools and components by hand up to 20kg. Able to ascend and descend vertical access equipment. Able to work at heights. A team player, able to work with CBRE Managed Services and Alstom representatives at all levels. Good PC skills Knowledge Good all-round knowledge of general building works, diagnostic and repair procedures, working knowledge of building services systems and maintenance schedules. Formally trained in electrical/mechanical Maintenance. BMS Knowledge. Mechanical and commissioning experience. Recognised Health and Safety Qualification, such as IOSH. Engineers must be able to demonstrate relevant knowledge of UPS, Generators, HV, PDU's, Crac units or equivalent, which will include the ability to fault find using the production of graphical information and the utilisation of current alarm data. Engineers must also understand the demarcation between maintainable assets and BPL maintained assets within laboratory and production environments. Experience: Mechanical maintenance skills Experience of maintaining all relevant mechanical and electrical equipment to clearly defined criteria. Good all-round knowledge of general building works, diagnostic and repair procedures. Working knowledge of building services systems and maintenance schedules. Circumstances: Must be willing to provide holiday and sickness cover at short notice and be flexible in their working patterns. Must have full UK driving license.

Working Hours 5 on / 5 off rotating shift pattern Alternating between days and nights: Day Shift: 6:00 AM 6:00 PM Night Shift: 6:00 PM 6:00 AM Salary & Benefits Annual Salary: £46,350 Competitive benefits package Opportunities for training and career development Supportive team environment within a leading food manufacturing business Join a Leader in Food Manufacturing Be part of a trusted name supplying fresh and prepared foods to top UK supermarkets and foodservice brands. Known for quality, sustainability, and innovation, this company continues to grow by investing in its people and cutting-edge technology. Your Role as Maintenance Engineer Join a dynamic engineering team where you'll handle mechanical and electrical maintenance across automated equipment from processing to packaging. Reporting to the Engineering Shift Leader, you ll tackle breakdowns, lead routine maintenance, and support continuous improvement, all while working rotating shifts to keep the factory running smoothly and safely Key Responsibilities Report directly to the Engineering Shift Leader as part of the on-site engineering team Provide effective and efficient mechanical and electrical support across the factory Take responsibility for personal health & safety, as well as that of colleagues and the working environment Respond promptly to breakdowns and provide reactive maintenance support to minimise downtime Carry out planned maintenance tasks and support continuous improvement projects through the maintenance system Work with a wide range of complex, automated equipment used in primary processing, cutting, and packaging operations Required Qualifications & Skills City & Guilds or BTEC Level 3 qualification in Mechanical or Electrical Engineering. Minimum of 3 years experience within an FMCG or fast-paced manufacturing environment. Demonstrated contribution to building and maintaining a high-performing engineering team. Strong initiative and the ability to effectively prioritise tasks under pressure. Quick and logical problem-solving skills, especially in emergency situations. Excellent attention to detail and strong observational abilities. Clear and confident communication skills, with a collaborative approach to teamwork. Mandatory (Training will be provided): Level 2 Food Safety Level 2 Health & Safety Environmental Awareness COSHH (Control of Substances Hazardous to Health) Manual Handling Desirable Qualifications & Skills Completion of a multi-skilled engineering apprenticeship Health & Safety certification at IOSH or NEBOSH level Previous engineering experience within a poultry processing or similar food manufacturing environment Why You ll Love Working Here Inclusive Culture A respectful and open environment where individuality is valued, and diversity is embraced across all teams. Health & Safety First Strong commitment to keeping everyone safe, with clear policies, training, and support to ensure a safe working environment. Food Quality & Safety Every employee plays a vital role in delivering food that is safe, legal, and of the highest quality from farm to fork. Training & Development Ongoing support for personal and professional growth, with opportunities to develop skills and progress within the business. How to Apply Click Apply Now to submit your updated CV and cover letter.

Requisition ID: 56686 Position Type: FT Permanent Workplace Arrangement: Maintenance Technician - Electrically qualified About Kerry Kerry is the world's leading taste and nutrition company for the food, beverage and pharmaceutical industries. Every day we partner with customers to create healthier, tastier and more sustainable products that are consumed by billions of people across the world. Our vision is to be our customers' most valued partner, creating a world of sustainable nutrition. A career with Kerry offers you an opportunity to shape the future of food while providing you opportunities to explore and grow in a truly global environment. About the role We are currently recruiting for a multi-skilled or electrically biased Maintenance Technicians to the join the Engineering Team at our Portbury production facility in Bristol. The facility is a dried blending and mixing production facility where we create flavour blends for some of the world's best loved brands, 100's of tonnes of product are precisely measured, mixed and packaged every week. This is a permanent position, with a 3 or 4 shift pattern - AM/PM/Nights/Days Key Responsibilities As a Maintenance Technician you will be responsible for: Complying with the health and safety policy and regulations. Resolving breakdowns, carryout PM's and work on project / improvement works with a view to minimizing production downtime. Carrying out risk assessments with the relevant people and put controls in place to minimise the risk to acceptable levels where reasonably practicable. Lock off any dangerous machinery immediately/ or repair and notify. Actively seek to undertake PMs on offline machinery where time allows. Fully complete PM sheets with all observations, jobs completed and recommendations and file with the Maintenance Planner, whilst always looking at ways of improving to PMs. Actively gain as much information as possible from production personnel regarding the fault on the machine to speed up the fault-finding process. Ensure engineering log and computer systems are fully filled in with all relevant information including PM numbers, all used parts, plant numbers, urgency of required parts, at the end of each shift. Ensure all communications with external persons are conducted in a professional manner which reflects the company profile. Qualifications, skills and experience To be successful in this role we are looking for the right behaviours and competencies as well as a proven track in a similar position. The ideal candidate will ideally have the following: HNC, City & Guilds or time served apprentice with appropriate electrical engineering qualifications. Experience within a similar role ideally gained within a food manufacturing environment, if not food, experience within any manufacturing environment is highly desirable. Electrically or biased, or multi-skilled. PLC experience highly desirable. Hydraulic and Pneumatic systems experience highly desirable Flexible approach with a positive 'can-do' attitude. Experience of SAP highly desirable. In Kerry we know that sometimes the perfect candidate doesn't exist, and people can be put off applying for a role if they don't fit all the requirements. If you are excited about working for us and have the majority of the skills or experience, then please do apply as you could be exactly what we are looking for. What's in it for me? You'll receive a completive salary and comprehensive benefits package. You will also be joining a well organised maintenance team with the opportunity to progress and grow your career with global leader in food manufacturing. In Kerry we benefit from the knowledge of our colleagues who bring a diverse range of cultures, backgrounds, lifestyles, and experiences. One team fostering an inclusive culture that, above all, inspires food and nourishes life. One culture where everyone brings their unique perspectives and experiences to help make us better, together. We are committed to nurturing an environment of positivity and inclusiveness, where everyone can be at their best, both personally and professionally. Our recruitment, selection and assessment process are based on the skills and competencies of the specific roles and based entirely on merit. We are committed to and value Diversity and Inclusion in all recruitment processes within Kerry and do not discriminate based on gender, race, class, economic status, ethnic background, sexual orientation, age, political beliefs, veteran status, marital status, or any other protected characteristic. Beware of scams online or from individuals claiming to represent us. A Kerry employee will not solicit candidates through a non-Kerry email address or phone number. In addition, Kerry does not currently utilise video chat rooms (e.g., Google Hangouts) to conduct interviews. Refuse any request that asks you to provide payment to participate in the hiring process (e.g., purchasing a "starter kit," investing in training, or something similar). Kerry will not ask you to pay any money at any point in the hiring process with the exception of reimbursable travel expenses. In addition, any payments made by Kerry will be from official firm accounts bearing the Kerry name. Recruiter: Posting Type: LI

Multiskilled Maintenance Engineer, £52,000, Ashby De-La-Zouch Package includes Annual bonus, 25 days holiday, 7% match pension, healthcare plan, paid overtime, lots of benefits. Shift pattern -Panama Days and Nights 06 00 / 18 00. Opportunity to work for a large manufacturing group producing heritage brands we all know and love. Fantastic job security with a company scaling up not down. Feel empowered and make your decision ATA are supporting a large manufacturing group with global presence across 31 countries. The group are a household name with thousands of people consuming their products each day, equating into billions of sales per annum. Their site in Leicestershire, is a fantastic place to work and is rated 4.5 stars on glass doors, with employees describing the business as welcoming, people centred and one that genuinely wants to positively grow each year. They are looking for a multiskilled maintenance engineer of electrical biased to join their skilled team, where they will be responsible for maintaining machinery within a fast paced automated environment. About the role As a maintenance engineer you will be responsible for the upkeep of machinery within a fast paced and automated manufacturing environment. Responsibilities include: Planned Preventive Maintenance. Reacting to breakdowns. Fault finding and fault rectification. Project, upgrade and installation. About you To be considered for this multiskilled maintenance engineer role you should be/have the following: Multiskilled experience with an electrical bias. Experience with 3 phase motor control, electro-pneumatics, PLC. Strong fault-finding skills, the ability to problem solve and rectify faults in a safe and effective manner. Due to the nature of the site, ideally you should have experience within a fast-paced environment. You should hold a recognised level 3 (or above) engineering qualification city and guilds, NVQ, HND, HNC. The Benefits Joining our customer, you will be joining a forward-thinking manufacturing group who are scaling up and not down. You ll be joining a company who hold value in their employee s opinion, asking for regular feedback to how they can improve the site. Alongside this, you will get to work for a company who are working towards achieving world class standards in health and safety, giving you piece of mind at work. If you think you are the right multiskilled maintenance engineer for this market leader, please press apply, call Ashton on (phone number removed), or email your CV too (url removed) ATA Recruitment specialises in Manufacturing, Infrastructure, Civil, Transportation and general Engineering recruitment on both a permanent and contract basis for more opportunities like this one, visit our website. ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

We are on the hunt for a skilled and dedicated Multi-Skilled Engineer to join my clients Maintenance Department in Coventry. The ideal candidate will have a keen eye for detail and a passion for ensuring systems function at their peak within the retail industry. Client Details Our client is a highly esteemed organisation within the retail industry. They are a large organisation with a strong presence across the UK, known for their innovative approach to technology in their pursuit of providing top-notch service to their customers. Description Completing maintenance to an excellent standard, whilst ensuring any Items that need rectifying are either immediately repaired or logged and scheduled In for revisiting. Operate with safety In mind at all times, dynamically risk-assessing all jobs to ensure the safety of myself and those around me. Building effective relationships with my colleagues and stakeholders from all departments, ensuring strong bonds with my operational colleagues and supporting them where possible. Monitoring performance of my site to ensure that we're always operating effectively. I understand terms such as availability and performance, and utilising various means to measure these. Being proactive and dynamic with my timekeeping, ensuring that I give the best value to the customer within my working time. I actively look for ways to be supportive and continuously Improve as a business. Create documentation for learnings for major breakdowns/outages, using root cause analysis methods and best practice approaches. Support In ensuring sites maintenance budget Is adhered to, through working with a no-waste approach and repairing/testing replaced equipment for future use where possible. Administrative maintenance, ensuring the CMMS is up to date and truly reflective of the maintenance position on site and completing other tasks such as shift reports to a high standard. Shift Pattern: 4 on 4 off 3 Banks of 3 on Days 06:00-18:00 1 Bank of 4 on nights (12 Days 4 Nights) Profile An experienced Electrical Biased Maintenance/Automation Engineer, ideally from a warehouse/logistics background as well as: A recognised qualification in Engineering. An understanding of PLC & SCADA systems is desirable Proficiency in automation software and programming languages. Strong analytical and problem-solving abilities. Excellent communication and teamwork skills. A detail-oriented mindset with a focus on quality and efficiency. Ability to work on your own or as part of a wider team Job Offer 50,000 per Annum Opportunities for professional development and growth. A positive and collaborative work culture that values innovation and creativity. Generous holiday leave and additional benefits. The opportunity to work with a diverse and dynamic team in Coventry

Multi Skilled Maintenance Engineer (FOOD / FMCG) £40'000 - £50'000 (DOE) + Progression + Holiday + Pension Shawbury, Shropshire Are you a Multi-skilled Maintenance Engineer looking for the next exciting step in your career with an industry leading company who offer continued progression as they continue to expand? Excellent opportunity for an Maintenance Engineer from an FMCG/ manufacturing backgroun click apply for full job details

A Nottingham based food manufacturing company are looking to recruit a multi skilled Maintenance Engineer working on perm NIGHTS for their modern food production facility based in South Nottingham. As an electrically biased multi skilled Maintenance Engineer you will provide engineering support to the production area and be responsible for reactive and proactive maintenance of plant, equipment, an click apply for full job details

Role: Multi-Skilled Maintenance Engineer - Field Service Location: Based Around Tipton Overnight Stays: Regional / Occassional UK Wide Travel Salary - 35,000 Average Earnings Per Annum - 45,000 I'm delighted to be partnering with a well-established company that boasts over 100 years of operation and technical expertise. They are currently seeking a motivated and capable Multi-Skilled Field Service Engineer for their Northern team. To support your transition into the role, you will be partnered with an experienced Field Service Engineer for the first 6-12 months. This mentoring period will ensure you gain a thorough understanding of the position and develop the required skills to eventually operate independently. Key Requirements Qualifications: NVQ Level 3 (minimum) Ideally apprenticeship trained Skillset: Multi-skilled engineer / Mechanical OR Electrical Biased Essential: Experience working with Power Press Mechanical: Experience with belts, pumps, conveyors, hydraulics, and pneumatics Electrical: Experience with sensors, relays, drives, inverters, and ideally replacing PCBs & (PLC's Siemens) Product set-up and calibration Accurate documentation and reporting Strong customer service skills & rapport building Ability to work both independently and as part of a team If this opportunity sounds like a good fit and you have experience in the areas listed above, I'd love to hear from you. Please don't hesitate to apply - I'll be happy to put you forward for consideration. Email: For a confidential chat: (phone number removed)

Maintenance Engineer - FMCG Shift - 2 Days 2 Nights 4 off Location: Crewkerne, Somerset A fantastic opportunity is now available for a Multi Skilled Maintenance engineer to join a High speed manufacturing business at their plant in Somerset. The successful maintenance engineer should be mutli skilled but have a slight bias towards the electrical discipline and therefore hold an engineering qualification. The nights maintenance engineer will be working a lot of the time on their own and therefore would be very beneficial if they have previously worked in a high speed manufacturing environment. In return for these engineering skills the maintenance engineer will receive extensive training opportunities as well as a fantastic benefits package which make this a great business to take the next step with. Skills required for Maintenance Engineer: Multi Skilled engineer Electrical engineering qualifications Experience in High Speed Manufacturing Good Mechanical Skills. The Maintenance Engineer will benefit from: Working for a market leading company Training and Development Machine specific courses Benefits Package If you are interested in this role and feel that you have the right skills then please click apply at the bottom of this advert. For further details contact William at Pioneer Selection As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details.

Mobile Multi-Skilled Engineer (Elec or HVAC) - North of England Job ID 178851 Posted 01-Aug-2024 Role type Full-time Areas of Interest Engineering/Maintenance Location(s) Doncaster - England - United Kingdom of Great Britain and Northern Ireland, Leeds - England - United Kingdom of Great Britain and Northern Ireland Mobile Engineer (Electrical or HVAC Bias) Company Profile CBRE is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 100,000 employees and operate in 48 countries. Job Purpose The purpose of the role is: CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Mobile Engineer to join the team located at sites across the North of England between Leeds and Doncaster. The successful candidate will be responsible to ensure all environmental conditions are always maintained about critical building systems and to carry out Planned Preventative Maintenance (PPM), reactive and breakdown works to all mechanical and electrical systems within the sites. Key Responsibilities: To deliver the following: To travel to sites across the advertised locations. Full UK driving license required. Ensure that routine PPM (to SFG 20) is carried out to all mechanical and electrical plant in accordance with Site task schedules and asset lists. Ensure that reactive tasks throughout the building are completed and be proactive in highlighting areas where improvements can be made. These reactive calls to also include concessionary stores and fabric related items. Ensure that plant faults and defects are swiftly remedied to always maintain plant in serviceable order. Ensure that suitable spares are available to carry out both maintenance and reactive works. To provide parts lists and estimated timescales to carry out remedial works. Ensure that all relevant paperwork is completed regarding PPM, reactive and breakdown works and that it is passed without delay to the contract administrator. Ensure that Method Statements and Risk Assessments are prepared and used for all tasks undertaken to always ensure safe working practices. To develop a good working relationship with all members of CBRE staff, subcontractors and the client representatives. Ensure the provision of a Safe and Healthy working environment. To include the wearing of uniform and PPE at all times. Ensure the professional image of CBRE Managed Services is presented at all times. Ensure up to date shift logs are kept at all times. Ensure that all plant rooms under the responsibility of CBRE Managed services are always locked and are kept in a clean and tidy condition. Supervising and monitoring of sub-contractors works whilst they are on site undertaking maintenance. To arrange and provide holiday and sickness cover at short notice and be flexible in their working patterns. To undertake lone working when and where required, subject to passing satisfactory training. Ensure assigned tasks are actioned and completed as appropriate. To ensure tasks as directed are completed with the appropriate H&S awareness/implementation. Ensure an awareness and compliance to the contractual KPI's/SLA's. Ensure Computer Based Maintenance system, SI LOCAL, is kept up to date and that PPM and reactive tickets are closed out with accurate data captured. To operate a Permit to Work System in accordance with CBRE Quality, Health & Safety procedures, and client requirements. To provide holiday and emergency cover as required, potentially at sites not normally covered. Any other task as directed by the account management team. Qualifications: Education A good basic education is essential, with good written and spoken English. Basic Mathematics skills. CITY AND GUILDS qualification in a relevant field. Skills Committed to the delivery of excellent customer service. Calm manner, able to work under pressure. Able to make sound decisions when needed. Physically fit and able to carry tools and components by hand up to 20kg. Able to ascend and descend vertical access equipment. Able to work at heights. A team player, able to work with CBRE Managed Services and Alstom representatives at all levels. Good PC skills Knowledge Good all-round knowledge of general building works, diagnostic and repair procedures, working knowledge of building services systems and maintenance schedules. Formally trained in electrical/mechanical Maintenance. BMS Knowledge. Mechanical and commissioning experience. Recognised Health and Safety Qualification, such as IOSH. Engineers must be able to demonstrate relevant knowledge of UPS, Generators, HV, PDU's, Crac units or equivalent, which will include the ability to fault find using the production of graphical information and the utilisation of current alarm data. Engineers must also understand the demarcation between maintainable assets and BPL maintained assets within laboratory and production environments. Experience: Mechanical maintenance skills Experience of maintaining all relevant mechanical and electrical equipment to clearly defined criteria. Good all-round knowledge of general building works, diagnostic and repair procedures. Working knowledge of building services systems and maintenance schedules. Circumstances: Must be willing to provide holiday and sickness cover at short notice and be flexible in their working patterns. Must have full UK driving license.

Position: Electrical Maintenance Engineer Location: Sheffield, South Yorkshire Salary: c 40k - 50K, commensurate with experience Days role: 7:00am - 3:00pm Monday-Thursday, 7:00am - 2:30pm Fridays Reporting to: Production Director Nicholas Associates has an excellent opportunity for an apprentice trained electrical biased, ideally multi skilled, Maintenance Engineer. The successful candidate will work within a team whilst demonstrating personal drive and motivation to deliver results. You will require a hands on approach and a working knowledge, operation, inspection, testing and maintenance of the following: Conversant with CNC Machining centres including interrogation of Siemens, Heidenhain and Fanuc programs for maintenance - fault finding analysis purposes. Electrical control of CNC centres, medium to heavy machine tools that include presses, furnaces, grinding machines, milling machines. The ability to fault find on and write/modify programs for Siemens, Heidenhain and Fanuc controls. Ability to carry out mechanical fault finding and repairs on CNC centres, Surface grinder and milling machines. Extensive knowledge of Pneumatic systems, valve control. Ability to check correct operation of CNC drive systems and inverter controlled machines. Ability to read electrical, mechanical, pneumatic and hydraulic drawings relating to equipment and make modifications if required. Electrical distribution systems Knowledge. You will: Demonstrate good team working abilities Be able to work on own initiative Be a self-starter and highly motivated individual Flexible in working time - call out Agile - Responds to the business needs using his skill sets. Multi skilled Have good organisation and time keeping skills Conversant with Health and Safety legislation including Electricity at Work Regulations 1989 - Electrical Risk assessments, safe systems of work, PUWER, Work at Height, COSHH, Isolation (LOTO) Capable of identifying root cause failure and corrective action Committed to change and continues improvement Experience in developing planned maintenance schedules Organising - Obtaining spares Utilise the maintenance management software (Agility)to maximise plant availability Create shift job reports for updates on current status of machine problems and resolutions. Work with production and production manager to deliver timely repairs and scheduled maintenance. Be willing to pass on knowledge to other team members and to work with them to help share knowledge on machine fault finding and repair procedures. Additional Responsibilities: Delivering increased productivity Reduced production costs maximising end user output Working with people at all levels of the organisation Constantly looking at how you can add value About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies Privacy Notice.

Electrical or Mechanical Maintenance Engineer - FM Service Provider - Foot Mobile / London Portfolio (Zones 1&2) - Up to 44,000 Exciting opportunity to work for an Established leading FM service provider situated in London. CBW are currently looking for a Electrical or Mechanical Maintenance Engineers to cover in the region of circa 9 commercial buildings located in Cannon Street and surrounding areas (Zones 1&2). The successful candidates will be electrically biased (C&G / NVQ) with a proven track record in commercial building maintenance. This is a Foot Mobile position and will require the successful candidates to attend a number of sites where he or she will be required to carry out PPM/Reactive maintenance to electrical and mechanical plant with particular emphasis on electrical maintenance on all Landlord areas. In return the company is offering a competitive salary paying up to 44,000 per annum based on experience/qualifications, overtime and further training. Key duties & Responsibilities Emergency Lighting Fire Alarm Testing Water Treatment Statutory Compliance Carry out PPM & Reactive maintenance on Pumps, Motors, Seals, Bearings and compressors Air Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning) Chillers - Re-set BMS System - Monitor (i.e. Hot & Colds etc) Ensuring log books are kept up to date Escorting specialist sub contractors Assisting other engineers Offering technical support Hours of work Monday to Friday - Hours: 08:00am to 17:00pm Requirements City & Guilds / NVQ in Electrical or Mechanical Installation / Engineering You must be able to provide copies of your trade certificates (Essential) A proven track record in commercial building maintenance An understanding of commercial building maintenance Multi-skilled Good communication skills Excellent customer service skills You must be happy to work on a "Foot Mobile" basis and attend multiple sites (i.e. This is not a mobile role where a vehicle is provided) Package Up to 44,000 (Based on experience / Qualifications) Zones 1&2 Travel card PDA's 25 days holiday + BH Overtime available Training and development opportunities Contributory pension scheme Please send your CV to Dan Barber at Cbw Staffing Solutions for more information

Mobile Multi-Skilled Engineer (Elec or HVAC) - Northeast England Job ID 178848 Posted 01-Aug-2024 Role type Full-time Areas of Interest Engineering/Maintenance Location(s) Darlington - England - United Kingdom of Great Britain and Northern Ireland, Felling - England - United Kingdom of Great Britain and Northern Ireland Mobile Engineer (Electrical or HVAC Bias) Company Profile CBRE is the global leader in real estate services and leverages the industry's most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 100,000 employees and operate in 48 countries. Job Purpose The purpose of the role is: CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Mobile Engineer to join the team located at sites across the Northeast of England between Darlington and Felling. The successful candidate will be responsible to ensure all environmental conditions are always maintained about critical building systems and to carry out Planned Preventative Maintenance (PPM), reactive and breakdown works to all mechanical and electrical systems within the sites. Key Responsibilities: To deliver the following: To travel to sites across the advertised locations. Full UK driving license required. Ensure that routine PPM (to SFG 20) is carried out to all mechanical and electrical plant in accordance with Site task schedules and asset lists. Ensure that reactive tasks throughout the building are completed and be proactive in highlighting areas where improvements can be made. These reactive calls to also include concessionary stores and fabric related items. Ensure that plant faults and defects are swiftly remedied to always maintain plant in serviceable order. Ensure that suitable spares are available to carry out both maintenance and reactive works. To provide parts lists and estimated timescales to carry out remedial works. Ensure that all relevant paperwork is completed regarding PPM, reactive and breakdown works and that it is passed without delay to the contract administrator. Ensure that Method Statements and Risk Assessments are prepared and used for all tasks undertaken to always ensure safe working practices. To develop a good working relationship with all members of CBRE staff, subcontractors and the client representatives. Ensure the provision of a Safe and Healthy working environment. To include the wearing of uniform and PPE at all times. Ensure the professional image of CBRE Managed Services is presented at all times. Ensure up to date shift logs are kept at all times. Ensure that all plant rooms under the responsibility of CBRE Managed services are always locked and are kept in a clean and tidy condition. Supervising and monitoring of sub-contractors works whilst they are on site undertaking maintenance. To arrange and provide holiday and sickness cover at short notice and be flexible in their working patterns. To undertake lone working when and where required, subject to passing satisfactory training. Ensure assigned tasks are actioned and completed as appropriate. To ensure tasks as directed are completed with the appropriate H&S awareness/implementation. Ensure an awareness and compliance to the contractual KPI's/SLA's. Ensure Computer Based Maintenance system, SI LOCAL, is kept up to date and that PPM and reactive tickets are closed out with accurate data captured. To operate a Permit to Work System in accordance with CBRE Quality, Health & Safety procedures, and client requirements. To provide holiday and emergency cover as required, potentially at sites not normally covered. Any other task as directed by the account management team. Qualifications: Education A good basic education is essential, with good written and spoken English. Basic Mathematics skills. CITY AND GUILDS qualification in a relevant field. Skills Committed to the delivery of excellent customer service. Calm manner, able to work under pressure. Able to make sound decisions when needed. Physically fit and able to carry tools and components by hand up to 20kg. Able to ascend and descend vertical access equipment. Able to work at heights. A team player, able to work with CBRE Managed Services and Alstom representatives at all levels. Good PC skills Knowledge Good all-round knowledge of general building works, diagnostic and repair procedures, working knowledge of building services systems and maintenance schedules. Formally trained in electrical/mechanical Maintenance. BMS Knowledge. Mechanical and commissioning experience. Recognised Health and Safety Qualification, such as IOSH. Engineers must be able to demonstrate relevant knowledge of UPS, Generators, HV, PDU's, Crac units or equivalent, which will include the ability to fault find using the production of graphical information and the utilisation of current alarm data. Engineers must also understand the demarcation between maintainable assets and BPL maintained assets within laboratory and production environments. Experience: Mechanical maintenance skills Experience of maintaining all relevant mechanical and electrical equipment to clearly defined criteria. Good all-round knowledge of general building works, diagnostic and repair procedures. Working knowledge of building services systems and maintenance schedules. Circumstances: Must be willing to provide holiday and sickness cover at short notice and be flexible in their working patterns. Must have full UK driving license.

Engineering Team Leader PSI Talent is delighted to announce a collaboration with an internationally renowned manufacturing company located in Nottinghamshire. With ongoing expansion and an increased workload, this marks an exciting opportunity to join a globally recognised organisation. Engineering Team Leader Responsibilities: As a Engineering Team Leader, you will play a pivotal role in executing reactive, preventative, and proactive maintenance tasks for onsite electrical equipment. Engineering Team Leader Key Duties: Provide exceptional electrical engineering support to the production team, ensuring minimal downtime. Execute planned maintenance duties with a proactive approach. Respond promptly to breakdowns, maintain clear communication with relevant parties, and efficiently resolve issues. Install electrical machinery with precision. Troubleshoot PLCs, Industrial Control systems, and relay control circuits. Proficiently work with the latest PLC technology, performing modifications and fault finding. Interpret advanced electrical drawings. Work with various drives and Human-Machine Interfaces (HMI). Maintain comprehensive documentation, logging all breakdowns and servicing work. Engineering Team Leader Experience: Strong electrical knowledge Essential. Experience with equipment such as: hydraulics, pneumatics, conveyors, flow wrappers, and robots Proficiency in PLCs fault finding, basic programming, trouble shooting Bachelor's degree or equivalent in a related field Essential. 17th or 18th edition, or electrical bias - essential Multi Skilled Maintenance Engineer Benefits: Free parking on site Life assurance from day one - 3 x salary Company Pension scheme - 8% Sick pay scheme EAP Retailer discounts Free or discounted food Development growth Maternity and paternity pay scheme Long service awards This role presents a unique opportunity to contribute to the success of a globally recognised manufacturing company. Join us in this dynamic environment, where your expertise will be valued and your career can flourish. Apply now to be a part of our collaborative and innovative team. Unfortunately, due to time restrictions we cannot respond to every applicant, in the event that we haven t contacted you within 48 hours please take it you have not been successful for this particular role, but your details will be kept on file and considered for all future vacancies. We are an equal opportunities agency and welcome applicants from all backgrounds. We are acting on behalf of the client as an Employment Agency in relation to this vacancy.

Recruit4staff is proud to be representing their client, a leading company in their search for a Multi-Skilled Maintenance Engineer to work in their leading facility in Bellshill. For the successful Multi-Skilled Maintenance Engineer our client is offering: £46,000 to £49,000 per annum (DOE) 4 on 4 off (2 days, 2 nights 7-7) Permanent position Free parking Annual 5% bonus Benefits package including life assurance and health care cover Pension matched up to 8% The Role - Multi-Skilled Maintenance Engineer: To diagnose faults and to test, repair, and maintain Mechanical / Electrical equipment Basic automation skills for fault finding and remediation, Uses PMS to support prioritisation and problem-solving (RCFA) Contact OEM's and other suppliers for technical support as and when required and expedite parts when not available on-site Analyse trends in reoccurring faults and breakdowns and Reduce downtime of current equipment Use and support departmental 5s programmes for workshops and stores Developing and recording all engineering activities carried out by use of the Electronic Maintenance Management System All functions to be carried out in accordance with ISO 9001:2000 quality management standard What our client is looking for in a Multi-Skilled Maintenance Engineer: HNC Electrical - DESIRABLE Completion of a recognised apprenticeship - ESSENTIAL Experience within the FMCG industry - ESSENTIAL Electrically biased - ESSENTIAL Automation - CI tools and techniques - DESIRABLE IOSHH/Nebosh - DESIRABLE Must be happy to work in a cold environment - ESSENTIAL Alternative job titles: Mechanical Maintenance Engineer, Mechanical Engineer, Shift Engineer, Maintenance Engineer Commutable From: Bellshill, Coatbridge, Hamilton, Cambuslang, Stonehouse, Coalburn, Motherwell, Larkhall, East Kilbride, Glasgow, For further information about this and other positions please apply now This vacancy is being advertised on behalf of Recruit4staff (Wrexham) Limited who are operating as a recruitment agency, agent, agencies, employment agency or employment business

Job Advertisement: Multi Skilled Maintenance Engineer (Electrical Bias) Location: Mirfield Shift Pattern: Continental Shift (2 Days, 2 Nights, 4 Off) Salary: £45,000 - £50,000 Are you an experienced, Electrically biased Multi Skilled Maintenance Engineer looking for an opportunity to advance your career? Join a market-leading company that values your expertise and offers a dynamic and supportive work environment. Why Join Us? Competitive Salary Earn between £45,000 and £50,000 annually. Work-Life Balance Benefit from a Continental Shift pattern, providing extended periods of time off. Professional Growth Engage in continuous process improvements and cross-functional projects. Team Collaboration Work with skilled professionals in a supportive, team-oriented environment. Health and Safety Focus Operate in a clean, safe setting with a strong emphasis on safety standards. Comprehensive Benefits Medical and DBS checks provided. Role Overview As a Multi Skilled Maintenance Engineer, you will be responsible for monitoring, maintaining, and repairing electrical components of production machinery. This role includes both proactive and reactive maintenance to ensure minimal downtime and maximum operational efficiency. Key Responsibilities Perform general maintenance duties to ensure smooth operations. Communicate details of unscheduled downtime and recommend solutions. Engage in troubleshooting, problem resolution, and process improvements. Maintain communication with team leaders and foremen. Ensure seamless shift handovers. Conduct routine maintenance per the PPM schedule. Prioritise production stoppages over daily duties. Perform installation work as required. Maintain a clean work environment and uphold workshop standards. Identify and propose improvements to production lines and machinery. Complete necessary documentation for all maintenance work. Stay up-to-date with role responsibilities and technical developments. Conduct electrical tests and diagnostic checks. Assist in training new team members. Support cross-functional projects and initiatives. Ensure quality service and compliance with health and safety policies. Participate in ISO and Ethical audits. Promote a culture of safety in the workplace. Ideal Candidate Profile Time-served Electrical Engineer or City & Guilds certificate (or equivalent) in Electrical Engineering, including at least 17th Edition. Proficient in problem analysis, PLC fault finding, and reading schematic diagrams. Strong knowledge of electrical control systems. Fast and accurate fault-finding skills. Keen attention to detail. Familiarity with hydraulic and pneumatic systems (preferred but not essential). Commitment to safe working practices. Strong organisational skills and ability to work independently. Previous experience in a manufacturing environment. Experience with Computerised Maintenance Management Systems (CMMS). Excellent communication skills and a team-oriented approach. In-depth knowledge of health and safety regulations. Additional Information This full-time role requires flexibility, including working all bank holidays except Christmas and New Year, and covering for colleagues when needed. Ready to take your career to the next level? APPLY NOW! Aqumen Business Solutions is acting as an Employment Agency in relation to this vacancy.

Multi-Skilled Maintenance Engineer (Electrical Bias) Ashby-De-La-Zouch Up to £52k Continental Shifts, 12 hours - Panama Overview This company is looking for a talented Electrical Maintenance Engineer to join their Engineering Team in Rotherham, Yorkshire. This is a fantastic opportunity for an experienced Electrical Maintenance Engineer to develop their career in a dynamic and supportive environment. Responsibilities: Undertake planned preventative maintenance activities with due consideration for safe plant operations and product quality. Develop and enhance maintenance systems and procedures. Routinely undertake continuous improvement activities to develop plant capability and equipment reliability. Participate in plant improvements, modifications, and capital investment projects. Coach, mentor, and support engineers and operational technicians as appropriate. Act as a subject matter expert on plant equipment and technologies. Requirements: Time-served Apprenticeship in Electrical Engineering, coupled with experience working as a Multi-Skilled or Electrical Maintenance Engineer. Good diagnostic and problem-solving skills. Proactive and dynamic approach to safety. Strong technical leadership skills. Ability to work under pressure with high attention to detail. Excellent communication skills. What You'll Get: Salary of up to £52,000 + Bonus Excellent pension and holidays Training and development schemes Healthcare plan Yolk Recruitment is an equal opportunities employer and embraces diversity in our workforce. We actively encourage applications from all qualified candidates, regardless of gender, age, race, religion, sexual orientation, disability, educational background, parental status, gender identity, or any other protected characteristic. We celebrate diversity at Yolk, allowing our team to bring their whole selves to work. Please note, whilst we do our best to contact all candidates, due to the high volume of applications, we cannot guarantee feedback for every role. If you do not hear from us within 7 days of applying, unfortunately, you have been unsuccessful. Please check our website for more opportunities.

Maintenance Engineer Wymondham 4 on 4 off Nights Up to 56,000 24 Shifts Holidays 10% Company Pension Contribution Employee Assistance Program Healthcare Cashback Plan Discounts Platform We are working with a market leading manufacturing company based in Norfolk who are looking for additional engineers to join their growing site near Wyndham due to growth and investment of the site. You'll be working in a team of engineers reporting into the engineering manager and shift lead. The main responsibilities are to complete PPMs and breakdowns on manufacturing and process machinery on site. As a business they are looking to employ cadidates who aspire to develop and progress themselves whether that's skillset development or leadership progression - this will be supported internally. If you have experience within a FMCG Environment, are a multi skilled engineer and looking for a new challenge with a progressive company then please get in touch! Essential Experience: 5+ years experience in a manufacturing maintenance/engineering role Experience working on conveyors, pneumatics, motors, gearboxes and more A good attitude towards working in a team A level 3 in electrical or electronics Bonus Experience: PLC fault finding experience - Siemens, Mitsubishi or Allen Bradley Apprenticeship trained Electrical bias 18th edition Consultant: Jackson Leonard - (url removed) If you are interested in this position please click 'apply'. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Job Title: Maintenance Electrician Location: Bury (static) Salary: 36,000 per annum Are you an experienced Maintenance Electrician with an electrical bias looking for a new challenge? We have an exciting opportunity for you! We are seeking a skilled professional to join our team and deliver high-quality maintenance services to a range of FM clients. Main duties will include: Responding to and complete the planned, reactive and repair work Carrying out all aspects of Electrical Maintenance tasks Respond to other general building maintenance tasks when required The ideal candidate must have the following: Recognised apprenticeship/industry qualification that ensures the successful candidate is fully competent and understands the works involved in the job role Experience working within FM or the building maintenance industry 18th edition qualified Ability to work independently and unsupervised Please apply with an up to date CV! Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.