2870 jobs found

Are you passionate about precision wiring and shaping the electrical heartbeat of world-class vehicles? Do you see prototype electrical work not just as fitting parts but as engineering artistry? We re offering an exciting opportunity for a skilled Electrical Development Technician to join an elite automotive engineering team focused on development and prototype builds. You will be part of a tight-knit crew pushing the limits of vehicle innovation designing, building, and testing bespoke wiring systems in an environment where no two days are the same. About the Role: As an Electrical Technician, you will be at the forefront of designing and fabricating complex wiring harnesses for development and prototype vehicles. Your hands-on work will support the electrical architecture of test and concept cars, from initial build stages through to commissioning and final shakedown. Collaborating closely with engineers, you ll carry out end-of-line testing, fault diagnosis, and calibration, while also installing specialist instrumentation and supporting vehicle testing programmes. This role demands attention to detail, a proactive attitude, and the ability to work flexibly and professionally in a fast-paced environment where innovation thrives. Key Responsibilities as an Electrical Development Technician: Design, build and test complex wiring harnesses for development and prototype cars Interact with engineering team to support harness and electrical design and development on prototype vehicles Perform end of line testing such as continuity and earthing checks, sensor calibration and validation, and other system checks Support the commissioning and shakedown of vehicles Feedback to Engineers on issues and make suggestions for improvement Facilitate installation of instrumentation and electrical systems required on prototype and test cars Support vehicle testing Maintain electrical development tools and equipment Our Ideal Electrical Development Technician: We are looking for someone who shares our passion for automotive excellence and brings: Strong experience of layout, design, manufacture and testing of low volume harnesses using Raychem DR25, Autosport, DT and other common connector systems. (Preferably within motorsport, automotive, aerospace, or similar sector) A thorough understanding of automotive electrical systems A relevant qualification (Apprenticeship, ONC, HNC, HND etc) or good hands on engineering experience within an engineering environment Experience with design and build of instrumentation looms and sensors, including setup and calibration Experience with electrical system and diagnostic software (Motec, Bosch, Peak/Vector or similar) Hours & Pay: Hours: Day Shift: Monday Friday (8:00 AM 17:00 PM). Overtime opportunities available. Umbrella Pay: £30 per hour paid via PAYE Umbrella model Please note, this role is deemed inside of IR35. The Umbrella pay rate offered is inclusive of the Assignment pay rate, holiday pay and Apex Recruitments contribution towards Employer Costs. Your Contract & Pay: Join the team on an ongoing contracting basis, paying £25.00 per hour. This position is offered Inside IR35, and your final Pay Rate will be uplifted to be paid via an Umbrella PAYE Payroll Model. Apply Now! If you have the skills, passion, and dedication to excel as an Electrical Development Technician , we d love to hear from you. Apply today to become a key part of the team that brings exceptional automotive visions to life.

PLC Software Engineer required for control system solutions provider based in Bury St Edmunds. The candidate should have Extensive Experience developing complex PLC applications and be able to generate technical documentation i.e. functional design specification, user manuals etc. They will need to have Motor Control and/or Electrical Test & Commissioning experience. PLC Software Engineer role includes the following: Developing & maintaining software applications on both new innovative research & development projects. Maintaining & supporting existing projects to customers requirements Developing or modifying the PLC application and to complete with application testing within a product factory test environment. Key requirements: Experience developing complex PLC applications Knowledge of multiple programming languages. Knowledge of Industrial Network protocols (Modbus TCP/IP Modbus RTU Profinet CAN Bus) Ability to generate technical documentation i.e. functional design specification, user manuals etc Desirable experience/knowledge: Siemens PLC/HMI Mitsubishi PLC/HMI Allen Bradley PLC/HMI Unitronics PLC/HMI Schneider PLC/HMI 3 phase 400v + 1 Phase 230v electrical theory and understanding of electronic components Ability to read and interpret electrical schematics This is an excellent opportunity to join a respected, well established control systems company. Hours of work Monday to Friday, 8.30am-5.00pm. Salary according to experience. Company bonus and 25 days holiday.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Working within our established Transmission & Distribution team, you will be responsible for undertaking substation earthing design studies and measurements ensuring the health & safety of substation operatives. You will also be involved in completing pipeline interference studies Reporting to a Principal Engineer, you will be responsible for assisting in the delivery of project-related tasks to meet budget and contributing towards the achievement of the divisional business plan. As part of your role, you will be responsible for conducting risk analysis of the plan and identify potential threats and risks. Using your expertise in Electrical Earthing you will make recommendations on potential mitigation for any issues identified, or work with stakeholders to agree actions. The role requires a certain level of flexibility to visit site locations across the UK. Role accountabilities: Responsibilities of the role include: Earthing system design and analysis using the CDEGS software suite Earthing system measurements Lightning protection system design Interference studies and mitigation Project management of multiple small earthing design projects to ensure they remain within budget and timescales constraints Assistance in the creation of competitive proposals/quotations for new packages of work Qualifications & Experience: Working knowledge of earthing system measurements Earthing system analysis using the industry analysis software package CDEGS Suitable experience of earthing issues and standards associated with power networks up to 400 kV Ability of communicating complex technical or commercial issues to peers or senior managers Ability to develop working relationships quickly and effectively Experience in writing clear and concise documentation Flexibility to travel both in the UK and overseas. Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We believe that by working together diverse people with different experiences develop the most innovative ideas. Equality, diversity and inclusion is at the heart of how we improve quality of life and we work closely with our people across six ED&I Workstreams: Age, Disability, Faith, Gender, LGBT+ and Race. A diverse and skilled workforce is essential to our success.

Our client, an electronics and technology design and manufacturing business, seek to appoint a Firmware Engineer working predominantly in embedded C. The Firmware Engineer role is a hands-on design position developing embedded software within a multidisciplinary team of talented software engineers. You'll be joining an excellent team with market-leading products and technologies that have already secured long term contracts to double in size over the next three years. Firmware Engineer - Skills & Abilities - Embedded Software, C, Electronics Degree qualified in Electronics, Electrical & Electronic Engineering or Computer Science preferred Proficient in C with at least two years of industry experience Experience with Microcontrollers / Microprocessors Application based software experience would be ideal Knowledge of software testing Firmware Engineer, C, Microcontroller, Electronics, Embedded Software Excited by this opportunity? Please do apply now!

Mott MacDonald Bentley is a fully integrated design and build business combining the design expertise of Mott MacDonald with the contracting experience of JN Bentley to deliver award winning projects. Working for Mott MacDonald Bentley, you will work on major water and wastewater schemes throughout all phases of the project from feasibility through to construction. With an annual turnover surpassing £500 million, Mott Macdonald Bentley cements its position as a leader within the industry. The sustained, robust business performance creates an ideal environment for career growth. MMB has been named a capital delivery partner on two multi-million-pound 'lots' that will see the company deliver projects across the region through to 2030 - with the potential for a five-year extension into AMP9 thereafter. Wessex Water serves 2.9 million customers with water and sewerage services across the south west of England. Set for record investment in AMP8 - more than double that of AMP7 - MMB will bring its strong track record of innovation and direct-delivery to drive a programme of work to improve water and wastewater treatment, water and wastewater networks, storm overflows, flooding resilience, and bioresources. Would you like: The opportunity to deliver a programme of work that will directly improve the lives of hundreds or thousands of customers? The ability to influence and improve how projects are delivered? A career path with a clear progression in both Technical or Management disciplines. An agile working arrangement that provides you flexibility whilst ensuring effective project delivery. As a Design Lead, you will be accountable for the design of a programme of water and wastewater infrastructure and non-infrastructure projects through the outline and detailed design, construction, commissioning, and handover. You will be responsible for building a project team comprised of electrical, mechanical, civil, and process designers who will support your Project Leaders. You will identify and mitigate resource constraints to enable project teams to complete the design to programme and within budget. Your responsibilities: Embed a positive and honest environment for your team where everyone is challenged and encouraged to reach their potential. Analyse project performance and identify risks that may impact project delivery. Develop mitigation to avoid negative impacts or exploit opportunities. Understand and administer the contract when change occurs. You will be responsible for maintaining the contract programme during design and handover. Other information This is a Mott MacDonald Bentley role, employed by Mott MacDonald. Mott MacDonald Bentley is a joint venture business, established in 1999 between civil engineering contractor JN Bentley and global management consultancy, Mott MacDonald. Mott MacDonald Bentley offers fully integrated design and build services to its clients, combining the contracting expertise of JN Bentley and the design specialisms of Mott MacDonald. This role is employed by Mott MacDonald but will involve working across the joint venture business, both with Mott MacDonald and JN Bentley colleagues. About Mott MacDonald Mott MacDonald is a global engineering, management and development consultancy. Our purpose is to improve society by considering social outcomes in everything we do, relentlessly focusing on excellence and digital innovation, transforming our clients' businesses, our communities and employee opportunities. A fundamental part of this is respecting each person's differences and striving to meet their needs. Our values: progress, respect, integrity, drive, excellence. We believe that because we care about what we do, we do things better. We know that our people are our most valuable asset, so we are dedicated to investing in them, through our comprehensive training and development schemes, exposure to the wider design and build business and endless opportunities. We are committed to creating a workplace where our people are safe, have a voice, can reach their full potential, and everyone shares in the rewards. You'll have the opportunity to contribute to projects that benefit our communities - from helping to secure water supplies for future generations to protecting homes and businesses from flood risk - our projects make a real difference. Diversity, Equity & Inclusion A Mott MacDonald Bentley we welcome applications from all sectors of the community. We are dedicated to building a diverse workplace where everyone feels included, has the opportunity to thrive, and is treated with respect. Even if you don't meet every requirement for this role but are excited about the opportunity, we encourage you to apply. Find out more about our approach to Diversity, Equity & Inclusion here: We are committed to ensuring that our recruitment practices are barrier-free and as inclusive as possible. This includes making adjustments during the job application process and throughout your future career with us. Please call or email to discuss any such adjustments that we can make. You can read more about our Equal Opportunities Policy here: Equality, diversity and inclusion - Mott MacDonald Agile working We are committed to providing a flexible and agile working environment that supports both our employees and the needs of the business.

Position: Contract Systems Engineer Rate: £50/hour (Outside IR35) Duration: Initial 10-month contract Location: Remote ( you may be required to go onsite for a few days initially on the outskirts of Birmingham) We're looking for a talented Contract Systems Engineer to join our client s team focused on IoT and smart charging devices. In this role, you'll transform stakeholder requirements into system design artifacts that guide the development of cutting-edge products and services. Our partner require a Systems engineer who is experienced with the entire product lifecycle from concept to manufacturing and working with third party testing / engineering consultancies. You should be able to give examples of this. Key Responsibilities Provide system-level engineering support to cross-functional teams for both new and existing products. Collaborate with product management to capture, refine, and validate stakeholder requirements. Break down complex product/system behaviours for team comprehension. Support project planning and estimation activities. Offer systems insight on architecture and strategic planning. Support the software, Electonics and testing teams. Core Accountabilities Translate business and user needs into clear technical specifications. Create and maintain system design documentation for global dev teams. Ensure final solutions align with user and business expectations. Influence external technical dependencies (e.g., protocol development, government initiatives). Keep up with emerging trends and technologies in IoT and energy storage / EV technology About You Degree (or equivalent experience) in an engineering discipline. Proven experience working within project teams. Familiarity with systems/software engineering lifecycle and associated tools (MBSE / SYSML/UML) Strong communication skills able to convey complex concepts clearly. Organized, accountable, and proactive in managing tasks. Desirable Extras Prior experience in roles such as Systems Engineer, Solution Architect, Product Owner, or Business/Systems Analyst. Background in customer-focused development environments. Skilled in gathering and analyzing complex stakeholder requirements. Basic electronics and C/C++ experience Preferred Industry Experience Candidates should ideally come from one or more of the following sectors: Electrical distribution Renewable energy / Green tech EV charging infrastructure IoT product development Consumer electronics Please send across a CV if interested.

Location: London Salary: Circa 75K (DOE) Skills Required: PLC Programming , Industrial Automation, Instrumentation, SCADA, HMI, Functional Safety, Control Systems Design Our client is a leading cleantech company developing advanced chemical recycling technology. They are seeking an Electrical, Controls, Instrumentation and Automation Engineer to contribute to the design, installation, and commissioning of their control systems. Role Requirements: Design and implement electrical, instrumentation, and automation systems. Develop and program PLC control systems and automation systems. Design, commission and integrate control systems and instrumentation. Troubleshoot, optimize, and support plant operations post-commissioning. Travel within the UK & EU for site visits and commissioning. Skills Required: 6+ years of experience in control systems engineering. Strong knowledge of PLC programming and industrial automation (Siemens or Omron preferred). Experience with process control, hazardous area classifications, and functional safety. Experience with SCADA, HMI, or industrial networking Ability to Design Controls Systems. Hands-on commissioning and system integration experience. Degree in Engineering or a related field. Benefits: 25 days holiday + public holidays Health insurance & flexible working options Hybrid working scheme Personal development budget Cycle to work scheme & office perks If you have the right skills and experience, please apply with your updated CV.

Job Title: Principal Electrical Design Engineer Location: Bristol - 1 day in the office per week Role Type: Permanent Salary: 60,000 - 70,000 per annum depending on experience Our client, an established aerospace & defence engineering firm in Bristol, require an experienced Principal Electrical Design Engineer to join their multi-disciplined team. As part of the Electrical Engineering Power Team, you will be leading the development of design documents, reviewing supplier documentation, developing technical requirements and undertaking assessment of design compliance to support the development of our electrical systems. Please note we can only consider sole UK Nationals (no dual nationalities) What the role of the Principal Electrical Design Engineer entails: Some of the main duties of the Principal Electrical Design Engineer will include: Develop design solutions to agreed time, cost and quality in accordance with project or business milestones Develop and manage requirements and acceptance criteria specific to a system or product and/or across a system of systems, platform or programme Understand the contractual and performance requirements for various systems, and support the definition and associated acceptance criteria and events through design, build, integration, installation and commissioning activities Produce documentation required to support the design review process, including diagrams; technical specifications; supporting calculations; design evidence and justifications Provide technical support to integrated performance and acceptance activities, including acceptance of equipment from suppliers through to system acceptance by the customer Support the development of estimates for the scope of work and resources required to deliver it to support bids, proposal development and project planning activities for various systems Provide support to the Certificate of Design activities appropriate to the discipline and articulate and present complex technical argument clearly, logically and simply Deliver technical input and engineering solutions in support of build activities, defect resolution and change management What experience you need to be the successful Principal Electrical Design Engineer: BEng (Hons) / MEng or equivalent and CEng (or be able to satisfy requirements for CEng) Demonstrable experience of engineering lifecycle Understanding of at least one of the following areas: Power system modelling; generators; switchgear; protection; power electronics In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring Experience of working within a relevant Engineering role to industry codes and standards This really is a fantastic opportunity for a Principal Electrical Design Engineer to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.

Principal Systems Engineer / Basildon / c 53.50 per hour PAYE We are recruiting on behalf of our client, a leading Aerospace and Defence Organisation for a Principal Systems Engineer to be part of a team supporting their next generation Hostile Artillery Locating System development. Joining during a crucial part of the engineering lifecycle you will lead end-to-end systems engineering efforts, from concept through to deployment. Collaborating across cross-functional teams to support integration and qualification of technical solutions. What you'll do as a Principal Systems Engineer : Contribute to requirements specification and management for complex, multi-faceted outputs. Participate in systems integration, verification, qualification & validation. Supporting junior engineers and contribute to technical excellence across the organisation. Ensure compliance with Mil Std's, Industry Std's and regulatory requirements. Supporting activities including design reviews and peer reviews. Development of the software security plan. What you'll bring Knowledge and experience of all stages of the engineering development lifecycle. Proven experience in requirements definition, verification, qualification & validation. Experience in system level testing. CE Marking compliance for electrical and electronic equipment (EEE). Experience using IBM Engineering Requirements Management DOORS (Dynamic Object-Oriented Requirements System). Awareness of Safety, Security and other legislative constraints. Defence industry experience. It would be nice if you had: Domain experience in an Electronics focused role. Evidenced experience of developing training manuals for end users. Applicants should be prepared to demonstrate knowledge of subjects during interview process. We are keen to hear from you even if you might not have experience in all the above. This is a 10 month Temporary contract with the potential to extend Monday to Friday, 37 hours per week, flexible Security Clearance This role is subject to pre-employment screening in line with the UK Government's Baseline Personnel Security Standard (BPSS). An additional range of Personnel Security Controls referred to as National Security Vetting (NSV) may apply, this could include meeting the eligibility requirements for The Security Check (SC) or Developed Vetting (DV). For more information and guidance please visit: (url removed) Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, pledge members for Neurodiversity in business, Disability committed members, Silver status pledge members for the Armed Forces Covenant, and Bronze trail blazers for Racial Equality matters. Gi Group of companies includes Gi Group Holdings Recruitment Ltd, Gi Recruitment Ltd, Draefern Ltd, Excel Resourcing (Recruitment Consultants) Ltd, Gi Recruitment Ltd, INTOO (UK) Ltd, Marks Sattin (UK) Ltd, TACK TMI UK Ltd, TACK International Ltd, Grafton Professional Staffing Ltd, Encore Personnel Services Ltd, Gi Group Staffing Solutions Ltd and Gi Group Ireland Ltd. Gi Group Staffing Solutions Ltd are acting as an Employment Business in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website.

Job Title: Junior Electrical Engineer Location: Barrow-in-Furness - 2 days on-site per month Role Type: Permanent Salary: 35,000 - 40,000 per annum depending on experience Our client, an established aerospace engineering firm in the North West of England, require an experienced Junior Electrical Engineer to join their multi-disciplined team. You will be part of a new team working on new technologies which are a first to the British Armed Forces. You will be involved in the development, verification, and validation processes, with a strong focus on Turbo Generators. Please note we can only consider sole UK Nationals (no dual nationalities) What the role of the Junior Electrical Engineer entails: Some of the main duties of the Junior Electrical Engineer will include: Writing technical specifications and supporting in the down selection and placing of contracts Liaising and collaborating with external suppliers and the customer Following design lifecycle management to ensure the delivery of equipment to specification Providing technical consultation to multi-discipline teams, suppliers and stakeholders on matters related to the power system Preparing technical reports, calculations, and presentations to communicate results and recommendations effectively What experience you need to be the successful Junior Electrical Engineer: Bachelor's or Master's degree in electrical engineering or related field Experience with high power, medium voltage power electronics, machines, and drives Knowledge of power systems, including conversion, distributions, and generation Excellent analytical, problem-solving, and decision-making skills This really is a fantastic opportunity for a Junior Electrical Engineer to progress their career. If you are interested please apply as soon as possible as this position will be filled quickly so don't miss out! Services advertised by Gold Group are those of an Agency and/or an Employment Business. We will contact you within the next 14 days if you are selected for interview. For a copy of our privacy policy please visit our website.

Electus Recruitment is supporting a leading client in the design engineering sector to appoint a Design Engineer based in Kent. This role offers the opportunity to contribute to a diverse portfolio of projects within a growing and dynamic industry. The successful candidate will be responsible for the detailed design of new products and concepts aligned with business objectives, utilising advanced CAD software (Creo) and collaborating closely with both internal teams and external stakeholders to ensure seamless product development. Key responsibilities include: Producing, verifying, and maintaining detailed technical drawings, schematics, and specifications ready for manufacture Managing multiple projects concurrently in line with New Product Introduction (NPI) plans Preparing manufacturing and process instructions to support new product launches Addressing early-stage manufacturing issues to optimise design for production Working with design briefs to resolve complex or original design challenges using CAD and CAE tools Coordinating drawing control activities and ensuring compliance with company policies, including COSHH Supporting test rig design and facilitating formal handover of designs to Manufacturing Process Engineering Essential criteria: BEng in Mechanical Engineering or a related scientific discipline Chartered or working towards Chartered/Incorporated Engineer status with a recognised Professional Engineering Institution Proficient in CREO or equivalent 3D CAD and product lifecycle management software Strong understanding of design for manufacture and assembly, GD&T, and design development processes including DFMEA and risk assessment Ability to communicate technical information effectively to varied audiences and manage deadlines under pressure Desirable experience: Familiarity with aerospace standards such as AS9100, AS13100, and AS9145 (APQP) Experience with material selection, plating finishes, and mechanical testing Knowledge of electrical principles alongside mechanical design skills Proven track record with NPI gate reviews and production readiness This role offers an excellent platform to work on a wide range of technically challenging projects within a fast-evolving sector. The position reports directly to the Engineering Manager and operates within a collaborative environment focused on innovation and quality. If you are an experienced Design Engineer looking to progress your career with a forward-thinking client, please get in touch.

EC&I Designer Devonport Paying up to 50p/h (Inside IR35) Responsibilities : Review and interpret technical information and requirements. Understand and create technical drawings, specifications, and reports. Produce CAD models and engineering designs for parts, components, systems, and structures in line with recognised standards and to the required time, cost, and quality requirements. Develop innovative design solutions with robust engineering substantiation. Undertake routine calculations (relevant to design specialisation). Use appropriate tools and techniques (including engineering judgement) to make informed design decisions. Provide solutions to manufacturing and installation issues by assisting in the resolution of technical and production queries. Liaise with design and engineering colleagues (and other appropriate stakeholders) across the GEPL to ensure coordination and functionality of design. Interface with customers and supply chain on design issues and assist with procurement specifications. Apply configuration management (including change control) processes to design outputs as well as legacy ?datum-pack? technical information. Prepare, produce, and maintain project technical information Support the application of technical governance through rigorous checking of design outputs as well as assist in the preparation and presentation of relevant assurance evidence at design reviews. Assist more senior designers in a range of activities including the production of estimates, as well as the maintenance, and improvement in quality standards of outputs. Fulfil Design Lead responsibilities as assigned for single discipline, low risk projects. Provide guidance to less experienced team members to support both their effective working, and their professional development. Experience required: Ideally have completed an engineering or design apprenticeship in a relevant discipline or possess transferable skills and experience in a marine/defence/industry design environment. National Certificate (or BTEC Level 3) qualified in a relevant engineering subject or hold a suitable qualification with demonstrable experience in a relevant field. Possess a good understanding of electrical design principles and practices. Ability to interpret and produce structural drawings and models. Hold or be eligible to obtain SC level security clearance Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Electrical Design Engineer - Laboratory Test Systems Location: Airbus, Filton Team: Test Means Architecture & Integration Focus: Hydrogen Testing & Innovation Are you an experienced Electrical Design Engineer with a passion for cutting-edge technology and sustainable aviation? Join Airbus in Filton and help shape the future of hydrogen-powered flight! We're looking for a proactive and skilled click apply for full job details

Training Partner Industry: Aerospace / Defence / Manufacturing Contract Type: Full-time, Permanent Salary: 40k to 45kpa + Excellent Benefits Are you passionate about developing people and shaping the future of engineering talent? Join a world-leading British engineering firm that plays a vital role in saving lives through cutting-edge aerospace technology. As a Training Partner, you'll support key manufacturing teams-including Sheet Metal, Fiberglass, Pipes, Pressure Test, Sub Assembly, and Inspection by designing and delivering impactful training programmes. You'll work closely with team leaders and managers to ensure that colleagues are equipped with the skills and knowledge they need to thrive. Key Responsibilities Design and implement training programmes tailored to technical skill requirements. Create development pathways and identify suitable training options to support personal and team growth. Deliver engaging training sessions, including materials, exercises, and assessments. Develop tools and methods to assess competence and certify skills. Maintain accurate training records within the learning management system. Monitor training KPIs and ensure quality assurance through peer reviews. Collaborate with stakeholders to identify and address critical training needs. What We're Looking For Proven experience in training and developing people within a technical or engineering environment. Strong communication and presentation skills. Ability to build effective relationships across teams and departments. Background in manufacturing processes within Aerospace, Defence, or Automotive sectors. Understanding of engineering drawings and technical documentation. Knowledge of relevant products or systems is advantageous. Qualifications Level 4 (HNC) or higher in Mechanical or Electrical Engineering, or equivalent technical training. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job.

A great opportunity is available to work for a world leading manufacturer of automated machinery for the packaging sector. Primarily based in the North West you will develop software projects to configure standard machine software for existing equipment supplied to a worldwide client base. Your role will also develop special one off bespoke machines within the R&D department. Automation Engineer £40,000 - £50,000 + Benefits 7-14% Company Contribution to Pension. 25 days hols + stats, Private health insurance and overseas allowances Lancashire Ref: 22569 Automation Engineer - The Role: Advancement/refinement of existing software platforms/controls systems using Siemens equipment Programming of PLC s, Drives & SCADA systems Liaison with customers (internal & external) and suppliers Independent creation & modification of programs for Siemens PLCs & SCADA s Independent modification of Siemens drive control systems Management of machine software design projects Automation Engineer - The Person: Siemens TIA 1500 series PLC programming START programming of Siemens Sinamics S120 & CU320 drive systems Siemens WinCC SCADA programming Ability to travel worldwide to suppliers and customer sites if required Degree or HND qualified Siemens Drive Programming experience Appreciation of pneumatic, hydraulic and machine control systems Fieldbus and commissioning experience Must be able to work unsupervised and be self motivated Electrical design skills (for complex control cabinets) would be highly advantageous Located in Lancashire, this role would be commutable from Blackburn, Burnley, Accrington, Bury, Rochdale and Bolton Looking for a job involved with automation, control systems, process control or systems integration? Register your details on our website, where you will find a full list of live positions where a customised automated search process allows immediate access to new vacancies as they are registered. Free, confidential service. For further information call Sharon Hill AE1

What Are We Looking For? DPS Group is looking to recruit a Control System Engineer to join the team working out of office in Glenrothes, Fife. The Control System Engineer will hand in hand with the wider engineering team to deliver our projects to the highest standard to ensure customer satisfaction. You ll be involved in the design of control software for various industries, utilising your PLC programming and SCADA knowledge, to deliver solutions to clients whilst ensuring all activities are carried out to the highest standard of quality. Some of Your Key Duties Include: Report directly to Control Manager/Senior Engineer and work closely with them to continually develop the DPS Group client base. Work within a budget allocated for each project, maintaining a commercial awareness whilst liaising with all stakeholders. Work closely with the project team and management to ensure the solution provided is of optimum cost whilst being technically acceptable and in accordance with the client specifications, current legislation and the companies offer. Provide Automation & Process Control System Development, Software and Hardware solutions. Providing testing, commissioning and documentation as required for all projects and tasks. The Engineer will have responsibility for the delivery of all Control Systems projects allocated to them. They will work closely with the Project Engineer/Manager, colleagues, and management to ensure that the solution provided is delivered on time, is within budget, whilst being technically acceptable and in accordance with the client specifications and the Companies offer. Providing innovative solutions. Maintain a good understanding of the project requirements by planning and forecasting, react to any changes that may occur and manage multiple projects through their life cycle. Use appropriate systems and programmes, including E-Plan, AutoCAD, Sharepoint & other MS Packages as needed. What Do You Need? Degree level education BSc or BEng in Engineering/Science or alternate qualification equivalent in Electrical, Control Systems Engineering Experience in Controls Systems Engineering Experienced in Siemens and/or Rockwell Automation and/or Schneider Electric latest Automation and Process Control Systems Advantageous if experienced with all aspects of automation and process control systems including drives, servo and AC drive/motors. Ideally experienced with DCS systems including PCS7 and PlantPAx Advantage if experience with simulation tools such as SIMIT Able to use own initiative and work to tight deadlines. Demonstrable experience in completion of full turnkey projects from design through to programming and commissioning. Excellent problem solving and communication skills. Excellent interpersonal skills and be experienced with client-facing. DPS Who Are We? We solve manufacturing challenges through the intelligent use of technology. DPS Group is one of the UK s leading integrated electrical, instrumental & control and compliance providers. We are trusted to deliver integrated solutions on often highly complicated projects, by some of the world s best-known brands, across a range of sectors. We help some of the world s highest profile brands by working with them to find solutions which are operationally efficient, and drive profitability. We work across a range of sectors including Power, Pharmaceutical, Petrochemical, Oil & Gas, Food & Beverage, Bio Energy and Paper, but to name a few. We offer an end-to-end virtuous cycle approach to projects which includes: Analyse, Develop, Comply, Maintain, Install, Build & Design. Our Innovative, creative and a customer focused approach ensures that DPS delivers the highest standards of safety, service & sustainability. This approach is fully embraced throughout our business and ensure we deliver the optimum level of efficiency whilst maintaining the highest quality standards and continuous improvement of our quality management system ISO 9001:2015. We aim to minimize environmental impact of our own systems and help develop environmentally responsible customer solutions. DPS Group recognises its obligations to act responsibly, ethically and with integrity in all its dealings with staff, customers, brand partners and suppliers, neighbours and the environment as a whole. We aim to: Minimise health, safety and environmental risks. Dispose of waste in an environmentally responsible manner. Reuse and recycle where practicable. Develop environmentally responsible customer solutions. Deliver a net positive impact on the environment. Promote sustainability within the organisation. DPS Group adheres to the Environmental Management Systems Standard ISO 14001:2015 to identify and control our environmental impact and improve our environmental performance. We are also official partners with Siemens, Rockwell Automation and Schneider Electric, giving us the unique opportunity to develop skills with these manufacturers solutions for our team. What DPS Offer To build successful teams and drive the level of quality that DPS is renowned for, we know we need the best people in industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in such an innovative industry. At DPS, you ll be given every opportunity to set the path of your own career through the business and work in an environment that will require you to rise to the challenge of working for a market leader. Industry Leading Salary Holiday Allowance Long Service Holidays (Position Dependant) Company Pension Scheme Private Healthcare Scheme (Contribute, Personal or Family - Position Dependant) Access to Company Healthcare Scheme (salary sacrifice) EV/Hybrid Car Lease Scheme At DPS Group we understand our continued success is down to our dedicated team, therefore we invest time and effort in each individual; training and assisting with their personal and professional development, helping them build a long-term career within the business.

Location: Cambridge Type: Full-Time, Fixed Term (3 Months) Rate: up to 60k full time equivalent per annum Reference: 35751 We are seeking an Electro-Mechanical Systems Engineer to join our client on a short-term basis, supporting the development and testing of cutting-edge technologies. This is a hands-on, fast-paced role based in Cambridge. This role is ideal for someone who thrives in a dynamic, hands-on environment and is looking to make a meaningful impact on a short-term project. Key Responsibilities Design and develop test tools for a microfluidic cartridge in a manufacturing environment Rapidly understand challenges and requirements, proposing and delivering effective solutions with speed and precision Development of automated systems, incorporating mechanical, fluidic and electrical components Script and control test gear including pumps, actuators and sensors Design and implement test systems and protocols including FMEA, data acquisition and data analysis Required Skills & Experience Strong Mechanical Engineering background; Electronics knowledge a plus Proven experience in a similar role, ideally in product testing for manufacture Proficient in developing and troubleshooting automated test systems Comfortable working across disciplines (mechanical, electrical, fluidic) and rapidly iterating designs Please contact us as soon as possible for more details or apply below!

GPS Links provide PLC and SCADA solutions for industrial applications from individual processes to large scale networks serving process engineering and manufacturing industries and is looking to recruit a Software Engineer in Bristol. In this role, you ll support projects from initial design through to on-site commissioning, working on systems that support critical UK infrastructure - particularly in the water, utilities, and energy sectors. This is a great opportunity for someone who s technically capable and eager to broaden their skills across PLCs, SCADA, and real-world automation delivery. We offer a supportive team environment where you can grow, take on more responsibility, and progress your career in industrial automation. Please note that due to the nature of this work there will be a requirement to travel and work away. Some of Your Key Duties Include: •Design and develop PLC software based on Functional Design Specifications (FDS), derived from the client s control philosophy or User Requirement Specification (URS). •Carry out simulations and testing throughout the project lifecycle, including iFAT, cFAT, and SAT. •Contribute to the setup, configuration, and validation of industrial networks •Develop and modify SCADA and HMI applications using industry-standard platforms. •Provide on-site and remote commissioning support, including I/O checks and system validation. •Diagnose and resolve control system issues during commissioning and post-installation callouts. •Collaborate effectively with engineers, electricians, and client stakeholders to deliver integrated solutions. •Ensure all software, documentation, and testing procedures comply with Quality Management System (QMS) and client requirements. What Do You Need? •HNC/HND in Electrical, Mechanical, Automation, or a related engineering discipline (or equivalent experience). •Experience in one or more of the following: Allen Bradley, SIEMENS, Mitsubishi, Rockwell. •Experience commissioning automation software on-site, including I/O validation, system testing, and live fault resolution. •Familiarity with UK water industry telemetry systems, including Servelec S250, S500, and S2000 outstations, DNP3 communication protocols, and cellular modem integration. •OT networking: Ethernet protocols (TCP/IP, UDP), industrial protocols (Modbus, Profibus, Profinet), VLANs, fibre optic networks, network redundancy (e.g. MRP, RSTP), and basic routing. •Experience with SCADA platforms such as WinCC, iFIX, VTScada, ClearSCADA, InTouch, Citect, or Ignition. •Process control knowledge, including PID tuning, loop optimisation, and control sequencing. •Comfortable engaging with clients and stakeholders during design, delivery, and commissioning. •Full UK Driving Licence. GPS Links Who Are We? GPS Links are an industrial automation specialist with a highly experienced team of software engineers and essential expertise in system design, programming, communications, interfaces and systems integration for PLC, HMI, and SCADA. Formed from the merger of GPS s SI business and Software Links Ltd, the expanded offer brings together software, electrical, ICA, and test engineers to provide a single source for delivering SI led solutions. RSE - Who Are We? RSE is a trusted clean water technology company, developing market leading products and solutions for purifying drinking water, recycling wastewater and cleaning water in industrial processes. We are disrupting the water sector, delivering water treatment products, technologies, and services to clients across the UK. Our service offering presents industry-leading innovative solutions and our dedicated staff play a key role in delivering our sustainability and wider business goals. With over 2000 staff across our group of companies, our strategic ambition will see the business continue to grow as we expand our operations and diversify our products. One of RSE s key focuses is driving servant leadership and giving our people the opportunity and responsibility to take an entrepreneurial approach in their career development. What GPS Links Offer To build successful teams and drive the level of quality that GPS Links is renowned for, we know we need the best people in industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in such an innovative industry. •Industry leading salary. •Overtime opportunities (project-dependent). •Hybrid working with travel across the UK. •Private healthcare (individual cover). •33 days annual leave (25 days + 8 bank holidays). •Holiday Buy/Sell scheme. •Company pension. •Cycle to Work scheme. •Discounted national gym membership. •Professional fees paid. •Employee discount platform. •EV/hybrid car lease scheme. •Health and wellbeing support including mental health champions and occupational health access. In a flourishing sector where there are vast career opportunities available, we believe our niche offering to the market means our people have the space to thrive and innovate our industry. If you re interested in a career with a company that will harness your skills and provides you with the support to create your own future, then please apply. We re excited to take you on the journey and continuing to grow as the UK water industry s contractor of choice.