Astute's Renewable Energy team is partnering with a UK leading business in anaerobic digestion that provides cost-effective, low carbon, food and organic waste management. We are looking to recruit a Senior Plant Maintenance Engineer for their site near Bedford. The vital Senior Plant Maintenance Engineer role comes with a salary of up to 49,000 (depending on experience), Bonus, pension, life assurance, overtime and additional benefits. If you're a Plant Maintenance Engineer and are looking to work for one of the largest Biogas operators in the UK and are a cutting edge, bold and inspirational business, then upload your CV to apply today. Responsibilities and duties of the Senior Plant Engineer role Reporting to the Plant Manager you will: Carry out planned preventative maintenance tasks Complete fault finding and repair tasks to equipment and machinery Carry out on call monitoring of the site to ensure safe and efficient performance via SCADA and CCTV Support the Plant Manager with compliance and deputise in their absence Maintain and develop high safety, environmental and compliance standards Be part of a shared on-call rota and working one in four weekends Operate plant vehicles when needed, such as a telehandler and forklift Other duties as required Professional qualifications We are looking for someone with the following: A recognised mechanical or electrical qualification/or time served IOSH/NEBOSH (Desirable) WAMITAB (Desirable) Full UK Driving Licence Personal skills The Senior Plant Maintenance Engineer role would suit someone who is: Relevant mechanical maintenance experience working on pumps, motors, gearboxes and other Ancillary equipment Previous PPM experience Experience working in anaerobic digestion or a similar processing environment such water treatment, energy from waste ect Knowledge of PLC controls or electronics (Advantage) Willing to support in other areas of plant operations Supporting with training up onsite Technicians Salary and benefits of the Senior Plant Engineer role Salary of up to 49,000 depending on experience Bonus and overtime Life assurance Additional benefits will be discussed at interview The opportunity to join a leading business in the renewable energy sector INDREN Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Jul 25, 2025
Full time
Astute's Renewable Energy team is partnering with a UK leading business in anaerobic digestion that provides cost-effective, low carbon, food and organic waste management. We are looking to recruit a Senior Plant Maintenance Engineer for their site near Bedford. The vital Senior Plant Maintenance Engineer role comes with a salary of up to 49,000 (depending on experience), Bonus, pension, life assurance, overtime and additional benefits. If you're a Plant Maintenance Engineer and are looking to work for one of the largest Biogas operators in the UK and are a cutting edge, bold and inspirational business, then upload your CV to apply today. Responsibilities and duties of the Senior Plant Engineer role Reporting to the Plant Manager you will: Carry out planned preventative maintenance tasks Complete fault finding and repair tasks to equipment and machinery Carry out on call monitoring of the site to ensure safe and efficient performance via SCADA and CCTV Support the Plant Manager with compliance and deputise in their absence Maintain and develop high safety, environmental and compliance standards Be part of a shared on-call rota and working one in four weekends Operate plant vehicles when needed, such as a telehandler and forklift Other duties as required Professional qualifications We are looking for someone with the following: A recognised mechanical or electrical qualification/or time served IOSH/NEBOSH (Desirable) WAMITAB (Desirable) Full UK Driving Licence Personal skills The Senior Plant Maintenance Engineer role would suit someone who is: Relevant mechanical maintenance experience working on pumps, motors, gearboxes and other Ancillary equipment Previous PPM experience Experience working in anaerobic digestion or a similar processing environment such water treatment, energy from waste ect Knowledge of PLC controls or electronics (Advantage) Willing to support in other areas of plant operations Supporting with training up onsite Technicians Salary and benefits of the Senior Plant Engineer role Salary of up to 49,000 depending on experience Bonus and overtime Life assurance Additional benefits will be discussed at interview The opportunity to join a leading business in the renewable energy sector INDREN Astute People are acting as an employment agency in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.
Join the Road to Success - HGV Technicians Wanted in Portsmouth! OTE: 46,000 - 56,500 Choose Your Shift - Day or Night Big Perks, Bright Future Are you ready to rev up your career with a company that values your skills, invests in your future, and treats you like more than just a number? This is your chance to join a leading commercial vehicle service provider with a strong national presence and a history dating back to 1973. Acorn by Synergie are on the lookout for skilled and passionate HGV Technicians to join a thriving, supportive workshop team in Portsmouth. Whether you're a seasoned expert or looking to grow your expertise, this is a role that offers variety, stability, and genuine progression. Choose the Shift That Fits Your Life: Day Shift: Monday to Friday, 8:00am - 5:00pm plus alternate Saturday mornings. Night Shift: Monday to Friday, 5:00pm - 1:30am. 40 hours per week Unpaid lunch break. What's in It for You? Excellent earnings: On-target earnings of 46,000 - 56,500. 30 days holiday (including Bank Holidays) - increasing with service. Employee discount hub: From supermarket savings to holidays and entertainment. Free parking & cycle to work scheme. Free eye tests + up to 70 toward glasses. Flu jabs on us - stay healthy year-round. Mental health support with in-house Mental Health First Aiders. Quarterly Star Awards - because great work deserves recognition. Staff events - celebrate success and build lasting connections. Salary sacrifice & pension schemes. Independent mortgage advice - because we care about your future. Clear training and career progression - move forward with confidence. What You'll Be Doing: Servicing and repairing HGVs to high industry and manufacturer standards (DAF experience a bonus!). Diagnosing mechanical faults and making smart, efficient repairs. Collaborating with a close-knit team to deliver quality and meet targets. Maintaining top workshop standards and keeping detailed service records. What We're Looking For: Level 3 Qualification in vehicle maintenance (essential). HGV Technician experience required. HGV license - great if you've got it, not essential if not. A strong problem-solver with a positive, team-focused attitude. Why Join Us? Because we're not just about vehicles - we're about people. You'll be joining a company that's big enough to offer real opportunities and support, but personal enough to value every member of the team. With a proud history, modern workshops, and a commitment to investing in your development, this is your chance to build a rewarding career where your work makes a difference every single day. Ready to get your career into gear? Apply now and drive your future forward with this great opportunity! Acorn by Synergie acts as an employment agency for permanent recruitment.
Jul 25, 2025
Full time
Join the Road to Success - HGV Technicians Wanted in Portsmouth! OTE: 46,000 - 56,500 Choose Your Shift - Day or Night Big Perks, Bright Future Are you ready to rev up your career with a company that values your skills, invests in your future, and treats you like more than just a number? This is your chance to join a leading commercial vehicle service provider with a strong national presence and a history dating back to 1973. Acorn by Synergie are on the lookout for skilled and passionate HGV Technicians to join a thriving, supportive workshop team in Portsmouth. Whether you're a seasoned expert or looking to grow your expertise, this is a role that offers variety, stability, and genuine progression. Choose the Shift That Fits Your Life: Day Shift: Monday to Friday, 8:00am - 5:00pm plus alternate Saturday mornings. Night Shift: Monday to Friday, 5:00pm - 1:30am. 40 hours per week Unpaid lunch break. What's in It for You? Excellent earnings: On-target earnings of 46,000 - 56,500. 30 days holiday (including Bank Holidays) - increasing with service. Employee discount hub: From supermarket savings to holidays and entertainment. Free parking & cycle to work scheme. Free eye tests + up to 70 toward glasses. Flu jabs on us - stay healthy year-round. Mental health support with in-house Mental Health First Aiders. Quarterly Star Awards - because great work deserves recognition. Staff events - celebrate success and build lasting connections. Salary sacrifice & pension schemes. Independent mortgage advice - because we care about your future. Clear training and career progression - move forward with confidence. What You'll Be Doing: Servicing and repairing HGVs to high industry and manufacturer standards (DAF experience a bonus!). Diagnosing mechanical faults and making smart, efficient repairs. Collaborating with a close-knit team to deliver quality and meet targets. Maintaining top workshop standards and keeping detailed service records. What We're Looking For: Level 3 Qualification in vehicle maintenance (essential). HGV Technician experience required. HGV license - great if you've got it, not essential if not. A strong problem-solver with a positive, team-focused attitude. Why Join Us? Because we're not just about vehicles - we're about people. You'll be joining a company that's big enough to offer real opportunities and support, but personal enough to value every member of the team. With a proud history, modern workshops, and a commitment to investing in your development, this is your chance to build a rewarding career where your work makes a difference every single day. Ready to get your career into gear? Apply now and drive your future forward with this great opportunity! Acorn by Synergie acts as an employment agency for permanent recruitment.
Project Engineer The Role: Barhale is one of three delivery partners within the Anglian Water Integrated Operational Solutions Alliance. IOS is a medium complexity, capital maintenance and enhancement, Civil and MEICA, design and build delivery unit working across Water and Water Recycling to support the successful implementation of the Anglian Water AMP 8 business plan. We are seeking an experienced Project Engineer to join our team, delivering wastewater infrastructure and non-infrastructure design projects within the framework of an NEC contract. This is a pivotal design-focused role, covering the full project lifecycle from conceptual design through to construction issue drawings. The successful candidate will play a key role in coordinating multidisciplinary design teams, subcontractors, surveyors and consultants, ensuring compliance with client requirements, NEC contract obligations, and relevant industry standards. The Project Engineer will provide ongoing support throughout the construction phase assisting with constructability reviews, resolving technical queries and assisting with handover of the O&M manuals and Health and Safety files as part of construction handover back to the client. Key Responsibilities: General Lead and coordinate the design process for water industry projects from feasibility and conceptual stages through to detailed design and construction issue. Receiving client needs and carrying out root cause analysis. Develop a conceptual design to address the clients need, drawing on relevant industry experience. Working with the planning team to create a P6 programme for the delivery of the design phase. This will be followed by attendance and contribution to regular programme reviews. Act as the key interface between the client, design consultants, and internal delivery teams, ensuring alignment with NEC contract requirements. Manage design deliverables, including design reports, drawings, specifications, and schedules. Support the Programme Delivery Manager in managing change control, early warnings, risk management, and design-related communications under the NEC framework. Ensure all designs comply with statutory regulations, health and safety requirements, and technical standards. Attend and contribute to design and project progress meetings, both internally and with clients and stakeholders. Manage and coordinate the resolution of RFI and technical queries during the design and construction phases. Provide technical leadership and mentoring to junior engineers and technicians as required. Maintaining project logs and registers. Health, safety, and environment Effective discharge of relevant duties under CDM 2015. Manage HSE in the pre-construction phase to ensure compliance with Company procedures and legal obligations. This may include management of site investigations and surveys. Quality Ensure quality in pre-construction surveys, site investigations and deliverables, in line with the 'be right first-time' programme. Key Measures and Targets Successful delivery on time of projects within budget. Key Relationships Contracts Managers, QS, Project Delivery Manager, Procurement manager, Planner, Project Managers, Design and Engineering Team Leads. Site Agents and Site team. Client's site, commissioning & engineering & technical assurance teams. Essential: Educated to Degree level or equivalent in an engineering-related subject, ideally in the field of Mechanical, Electrical, ICA or Civil engineering. Industry experience and industry qualifications will also be considered in place of a degree qualification. Proficient with IT, specifically the full Office 365 suite. Knowledge of health and safety legislation regarding safe work practices. Ability to communicate at all levels A team player with the ability to coordinate project-related activities with clients' consultants and 3rd Desirable: WIMES Standards familiarisation. Experience of working within the utilities industry, especially Water & Wastewater Background skills and experience in working within programme and schedule management. Commercial and contract knowledge Understanding of BIM. PRINCE2 or other Project Management qualifications. SMSTS or NEBOSH qualified
Jul 25, 2025
Full time
Project Engineer The Role: Barhale is one of three delivery partners within the Anglian Water Integrated Operational Solutions Alliance. IOS is a medium complexity, capital maintenance and enhancement, Civil and MEICA, design and build delivery unit working across Water and Water Recycling to support the successful implementation of the Anglian Water AMP 8 business plan. We are seeking an experienced Project Engineer to join our team, delivering wastewater infrastructure and non-infrastructure design projects within the framework of an NEC contract. This is a pivotal design-focused role, covering the full project lifecycle from conceptual design through to construction issue drawings. The successful candidate will play a key role in coordinating multidisciplinary design teams, subcontractors, surveyors and consultants, ensuring compliance with client requirements, NEC contract obligations, and relevant industry standards. The Project Engineer will provide ongoing support throughout the construction phase assisting with constructability reviews, resolving technical queries and assisting with handover of the O&M manuals and Health and Safety files as part of construction handover back to the client. Key Responsibilities: General Lead and coordinate the design process for water industry projects from feasibility and conceptual stages through to detailed design and construction issue. Receiving client needs and carrying out root cause analysis. Develop a conceptual design to address the clients need, drawing on relevant industry experience. Working with the planning team to create a P6 programme for the delivery of the design phase. This will be followed by attendance and contribution to regular programme reviews. Act as the key interface between the client, design consultants, and internal delivery teams, ensuring alignment with NEC contract requirements. Manage design deliverables, including design reports, drawings, specifications, and schedules. Support the Programme Delivery Manager in managing change control, early warnings, risk management, and design-related communications under the NEC framework. Ensure all designs comply with statutory regulations, health and safety requirements, and technical standards. Attend and contribute to design and project progress meetings, both internally and with clients and stakeholders. Manage and coordinate the resolution of RFI and technical queries during the design and construction phases. Provide technical leadership and mentoring to junior engineers and technicians as required. Maintaining project logs and registers. Health, safety, and environment Effective discharge of relevant duties under CDM 2015. Manage HSE in the pre-construction phase to ensure compliance with Company procedures and legal obligations. This may include management of site investigations and surveys. Quality Ensure quality in pre-construction surveys, site investigations and deliverables, in line with the 'be right first-time' programme. Key Measures and Targets Successful delivery on time of projects within budget. Key Relationships Contracts Managers, QS, Project Delivery Manager, Procurement manager, Planner, Project Managers, Design and Engineering Team Leads. Site Agents and Site team. Client's site, commissioning & engineering & technical assurance teams. Essential: Educated to Degree level or equivalent in an engineering-related subject, ideally in the field of Mechanical, Electrical, ICA or Civil engineering. Industry experience and industry qualifications will also be considered in place of a degree qualification. Proficient with IT, specifically the full Office 365 suite. Knowledge of health and safety legislation regarding safe work practices. Ability to communicate at all levels A team player with the ability to coordinate project-related activities with clients' consultants and 3rd Desirable: WIMES Standards familiarisation. Experience of working within the utilities industry, especially Water & Wastewater Background skills and experience in working within programme and schedule management. Commercial and contract knowledge Understanding of BIM. PRINCE2 or other Project Management qualifications. SMSTS or NEBOSH qualified
Do you have experience in Mechanical, Hydraulic or Electrical • Are you looking to join the wind industry • Then Vestas has an opportunity for you! MVOW Offshore Wind UK > SBU NCE Service > Kincardine Technicians The Service department is responsible for service and maintenance of the wind farms within UK and Ireland. The department has an open and informal culture, where teamwork and good communication is the key to our success. You will have the opportunity to work in an exciting industry and in a team of highly motivated employees. Responsibilities Your main responsibilities will be: Compliance to Vestas' Health and Safety Management system Maintenance & Service of electrical and mechanical systems Maintaining and upgrading installation activities Trouble shooting of electrical and mechanical systems and fault diagnosis Creating follow-up orders Registration of time and material consumption in SAP Qualifications Ideally you will have completed an electrical or mechanical degree or completed an apprenticeship For example, NVQ L4, HNC/HND in Mech/Elec/Marine, C&G full technological certificate/diploma, Master's in electrical/Mechanical Engineering Competencies We expect that you: Highly safety-minded and comfortable working offshore and at heights You are flexible and willing to travel to other sites when required, both internationally and within the UK Mature and reliable with a high technical drive Good problem-solving skills, but it is also important that you are a team player and willing to seek help when needed Good English skills both oral and in writing Basic knowledge of Microsoft Office Full driver's license What we offer Great training & development Pay, benefits and opportunity to work in the growing offshore wind sector for the world s largest wind OEM Additional information Your work location will be in GB, Aberdeen. Rotation position 14 days on 14 days off. Applications are handled on an ongoing basis. Please apply online with your letter of motivation and CV. Please note: We do amend or withdraw our jobs and reserve the right to do so at any time, including prior to the advertised closing date. All inquiries are treated confidentially. Our commitment to a fair hiring At Vestas, we evaluate all candidates solely on professional experience, education, and relevant skills. To support a fair recruitment process, please remove any photos, dates of birth or graduation dates, gender pronouns, marital status, or other personal details not relevant to the role, before submitting your CV. Please keep your CV focused on work and educational details, and the necessary information that we contact you (email and phone number). We train our hiring teams in inclusive evaluation and regularly review process outcomes to ensure fairness. DEIB Statement At Vestas, we recognise the value of diversity, equity, and inclusion in driving innovation and success. We strongly encourage individuals from all backgrounds to apply, particularly those who may hesitate due to their identity or feel they do not meet every criterion. As our CEO states, "Expertise and talent come in many forms, and a diverse workforce enhances our ability to think differently and solve the complex challenges of our industry". Your unique perspective is what will help us powering the solution for a sustainable, green energy future. BEWARE - RECRUITMENT FRAUD It has come to our attention that there are a number of fraudulent emails from people pretending to work for Vestas. Read more via this link, About Vestas Vestas is the energy industry's global partner on sustainable energy solutions. We are specialised in designing, manufacturing, installing, and servicing wind turbines, both onshore and offshore. Across the globe, we have installed more wind power than anyone else. We consider ourselves pioneers within the industry, as we continuously aim to design new solutions and technologies to create a more sustainable future for all of us. With more than 185 GW of wind power installed worldwide and 40+ years of experience in wind energy, we have an unmatched track record demonstrating our expertise within the field. With 30,000 employees globally, we are a diverse team united by a common goal: to power the solution - today, tomorrow, and far into the future. Vestas promotes a diverse workforce which embraces all social identities and is free of any discrimination. We commit to create and sustain an environment that acknowledges and harvests different experiences, skills, and perspectives. We also aim to give everyone equal access to opportunity. To learn more about our company and life at Vestas, we invite you to visit our website at and follow us on our social media channels. We also encourage you to join our Talent Universe to receive notifications on new and relevant postings.
Jul 25, 2025
Full time
Do you have experience in Mechanical, Hydraulic or Electrical • Are you looking to join the wind industry • Then Vestas has an opportunity for you! MVOW Offshore Wind UK > SBU NCE Service > Kincardine Technicians The Service department is responsible for service and maintenance of the wind farms within UK and Ireland. The department has an open and informal culture, where teamwork and good communication is the key to our success. You will have the opportunity to work in an exciting industry and in a team of highly motivated employees. Responsibilities Your main responsibilities will be: Compliance to Vestas' Health and Safety Management system Maintenance & Service of electrical and mechanical systems Maintaining and upgrading installation activities Trouble shooting of electrical and mechanical systems and fault diagnosis Creating follow-up orders Registration of time and material consumption in SAP Qualifications Ideally you will have completed an electrical or mechanical degree or completed an apprenticeship For example, NVQ L4, HNC/HND in Mech/Elec/Marine, C&G full technological certificate/diploma, Master's in electrical/Mechanical Engineering Competencies We expect that you: Highly safety-minded and comfortable working offshore and at heights You are flexible and willing to travel to other sites when required, both internationally and within the UK Mature and reliable with a high technical drive Good problem-solving skills, but it is also important that you are a team player and willing to seek help when needed Good English skills both oral and in writing Basic knowledge of Microsoft Office Full driver's license What we offer Great training & development Pay, benefits and opportunity to work in the growing offshore wind sector for the world s largest wind OEM Additional information Your work location will be in GB, Aberdeen. Rotation position 14 days on 14 days off. Applications are handled on an ongoing basis. Please apply online with your letter of motivation and CV. Please note: We do amend or withdraw our jobs and reserve the right to do so at any time, including prior to the advertised closing date. All inquiries are treated confidentially. Our commitment to a fair hiring At Vestas, we evaluate all candidates solely on professional experience, education, and relevant skills. To support a fair recruitment process, please remove any photos, dates of birth or graduation dates, gender pronouns, marital status, or other personal details not relevant to the role, before submitting your CV. Please keep your CV focused on work and educational details, and the necessary information that we contact you (email and phone number). We train our hiring teams in inclusive evaluation and regularly review process outcomes to ensure fairness. DEIB Statement At Vestas, we recognise the value of diversity, equity, and inclusion in driving innovation and success. We strongly encourage individuals from all backgrounds to apply, particularly those who may hesitate due to their identity or feel they do not meet every criterion. As our CEO states, "Expertise and talent come in many forms, and a diverse workforce enhances our ability to think differently and solve the complex challenges of our industry". Your unique perspective is what will help us powering the solution for a sustainable, green energy future. BEWARE - RECRUITMENT FRAUD It has come to our attention that there are a number of fraudulent emails from people pretending to work for Vestas. Read more via this link, About Vestas Vestas is the energy industry's global partner on sustainable energy solutions. We are specialised in designing, manufacturing, installing, and servicing wind turbines, both onshore and offshore. Across the globe, we have installed more wind power than anyone else. We consider ourselves pioneers within the industry, as we continuously aim to design new solutions and technologies to create a more sustainable future for all of us. With more than 185 GW of wind power installed worldwide and 40+ years of experience in wind energy, we have an unmatched track record demonstrating our expertise within the field. With 30,000 employees globally, we are a diverse team united by a common goal: to power the solution - today, tomorrow, and far into the future. Vestas promotes a diverse workforce which embraces all social identities and is free of any discrimination. We commit to create and sustain an environment that acknowledges and harvests different experiences, skills, and perspectives. We also aim to give everyone equal access to opportunity. To learn more about our company and life at Vestas, we invite you to visit our website at and follow us on our social media channels. We also encourage you to join our Talent Universe to receive notifications on new and relevant postings.
Lawnmower Technician We're looking for a technician to join a well-established, family-owned business specialising in horticultural and ground care machinery. In this role, you'll carry out diagnostics, install new equipment, and provide technical support alongside our dedicated product teams and Managers in the professional ground care division. Strong computer literacy is essential, as modern machinery includes advanced digital systems. An understanding in mechanical maintenance and repair is also required to succeed in this position. Prior experience with horticultural equipment, such as lawnmowers, is beneficial but not essential Perform servicing and repairs on a range of customers machinery Support the setup, demonstration, and commissioning of new equipment Identify faults and carry out effective repairs Collaborate closely with internal teams and sales personnel to meet both product and client requirements Maintain and support relationships with existing clients Communicate with customers and suppliers when necessary to resolve technical or service-related issues Participate in relevant training sessions to stay up to date with company standards and industry developments Benefits Immediate start Competitive salary + Company vehicle + company mobile 32 days holiday Life Assurance Cover To apply, please send a copy of your CV and a covering letter to alex com or, alternatively, submit your application via the link below Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
Jul 25, 2025
Full time
Lawnmower Technician We're looking for a technician to join a well-established, family-owned business specialising in horticultural and ground care machinery. In this role, you'll carry out diagnostics, install new equipment, and provide technical support alongside our dedicated product teams and Managers in the professional ground care division. Strong computer literacy is essential, as modern machinery includes advanced digital systems. An understanding in mechanical maintenance and repair is also required to succeed in this position. Prior experience with horticultural equipment, such as lawnmowers, is beneficial but not essential Perform servicing and repairs on a range of customers machinery Support the setup, demonstration, and commissioning of new equipment Identify faults and carry out effective repairs Collaborate closely with internal teams and sales personnel to meet both product and client requirements Maintain and support relationships with existing clients Communicate with customers and suppliers when necessary to resolve technical or service-related issues Participate in relevant training sessions to stay up to date with company standards and industry developments Benefits Immediate start Competitive salary + Company vehicle + company mobile 32 days holiday Life Assurance Cover To apply, please send a copy of your CV and a covering letter to alex com or, alternatively, submit your application via the link below Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
Citizen Machinery is a CNC machine tool specialist manufacturer designing and building state of the art CNC turning technology to UK industry with both the Miyano and Cincom brand (fixed head and sliding head lathes) using advanced technologies including LFV. Citizen pride themselves on providing a career path for passionate CNC setters or CNC maintenance Technicians who want a career as a Field Service Engineer. Have you completed a mechanical engineering Apprenticeship or a Maintenance Apprenticeship and been working on CNC machines and live within the areas of Birmingham through to Bristol? Then please apply now. We will use your current skills and experience to fully train you to become a Field Service Engineer in time. You will need a clean driving licence and be happy to be field based and during your training may be away from home on occasions. You will start initially on the warranty side of the business and the role will include:- Servicing and maintaining our Cincom and Miyano CNC machines Using electrical and mechanical skills Warranty based repairs Annual and period servicing General Maintenance If you live within easy commuting distance of Birmingham to Bristol, have a clean driving licence and have completed an Apprenticeship in Mechanical or Maintenance Engineering and been working with CNC machines, please apply now.
Jul 25, 2025
Full time
Citizen Machinery is a CNC machine tool specialist manufacturer designing and building state of the art CNC turning technology to UK industry with both the Miyano and Cincom brand (fixed head and sliding head lathes) using advanced technologies including LFV. Citizen pride themselves on providing a career path for passionate CNC setters or CNC maintenance Technicians who want a career as a Field Service Engineer. Have you completed a mechanical engineering Apprenticeship or a Maintenance Apprenticeship and been working on CNC machines and live within the areas of Birmingham through to Bristol? Then please apply now. We will use your current skills and experience to fully train you to become a Field Service Engineer in time. You will need a clean driving licence and be happy to be field based and during your training may be away from home on occasions. You will start initially on the warranty side of the business and the role will include:- Servicing and maintaining our Cincom and Miyano CNC machines Using electrical and mechanical skills Warranty based repairs Annual and period servicing General Maintenance If you live within easy commuting distance of Birmingham to Bristol, have a clean driving licence and have completed an Apprenticeship in Mechanical or Maintenance Engineering and been working with CNC machines, please apply now.
Lawnmower Technician We're looking for a technician to join a well-established, family-owned business specialising in horticultural and ground care machinery. In this role, you'll carry out diagnostics, install new equipment, and provide technical support alongside our dedicated product teams and Managers in the professional ground care division. Strong computer literacy is essential, as modern machinery includes advanced digital systems. An understanding in mechanical maintenance and repair is also required to succeed in this position. Prior experience with horticultural equipment, such as lawnmowers, is beneficial but not essential Perform servicing and repairs on a range of customers machinery Support the setup, demonstration, and commissioning of new equipment Identify faults and carry out effective repairs Collaborate closely with internal teams and sales personnel to meet both product and client requirements Maintain and support relationships with existing clients Communicate with customers and suppliers when necessary to resolve technical or service-related issues Participate in relevant training sessions to stay up to date with company standards and industry developments Benefits Immediate start Competitive salary + Company vehicle + company mobile 32 days holiday Life Assurance Cover To apply, please send a copy of your CV and a covering letter to alex com or, alternatively, submit your application via the link below Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
Jul 25, 2025
Full time
Lawnmower Technician We're looking for a technician to join a well-established, family-owned business specialising in horticultural and ground care machinery. In this role, you'll carry out diagnostics, install new equipment, and provide technical support alongside our dedicated product teams and Managers in the professional ground care division. Strong computer literacy is essential, as modern machinery includes advanced digital systems. An understanding in mechanical maintenance and repair is also required to succeed in this position. Prior experience with horticultural equipment, such as lawnmowers, is beneficial but not essential Perform servicing and repairs on a range of customers machinery Support the setup, demonstration, and commissioning of new equipment Identify faults and carry out effective repairs Collaborate closely with internal teams and sales personnel to meet both product and client requirements Maintain and support relationships with existing clients Communicate with customers and suppliers when necessary to resolve technical or service-related issues Participate in relevant training sessions to stay up to date with company standards and industry developments Benefits Immediate start Competitive salary + Company vehicle + company mobile 32 days holiday Life Assurance Cover To apply, please send a copy of your CV and a covering letter to alex com or, alternatively, submit your application via the link below Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
Service Technician We're looking for an experienced service technician to join a well-established, business specialising in horticultural and ground care machinery. You will carry out servicing and repairs on a range of horticultural machinery. This is a field-based role, requiring travel to customer sites. A company vehicle will be provided for all work-related travel. Knowledge of horticultural machinery is an advantage Knowledge of domestic and professional grass machinery Perform routine maintenance and repair work on horticultural machinery for a wide range of customers Identify and resolve mechanical issues, delivering both servicing and effective repair solutions Use diagnostic tools and software to troubleshoot hydraulic and electrical system faults Work independently with minimal supervision, while also contributing effectively within a team environment Capable of manual handling, with a sensible approach to lifting heavy items safely Communicate clearly and professionally with colleagues, suppliers, and clients Confident using computers and relevant software systems Provide outstanding customer service, both in person and over the phone Highly self-motivated with a proactive, problem-solving attitude Must hold a full and valid UK driving licence Benefits Competitive salary Company vehicle + mobile provided 32 days annual leave Life assurance To apply, please send a copy of your CV and a covering letter to alex com or, alternatively, submit your application via the link below Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
Jul 25, 2025
Full time
Service Technician We're looking for an experienced service technician to join a well-established, business specialising in horticultural and ground care machinery. You will carry out servicing and repairs on a range of horticultural machinery. This is a field-based role, requiring travel to customer sites. A company vehicle will be provided for all work-related travel. Knowledge of horticultural machinery is an advantage Knowledge of domestic and professional grass machinery Perform routine maintenance and repair work on horticultural machinery for a wide range of customers Identify and resolve mechanical issues, delivering both servicing and effective repair solutions Use diagnostic tools and software to troubleshoot hydraulic and electrical system faults Work independently with minimal supervision, while also contributing effectively within a team environment Capable of manual handling, with a sensible approach to lifting heavy items safely Communicate clearly and professionally with colleagues, suppliers, and clients Confident using computers and relevant software systems Provide outstanding customer service, both in person and over the phone Highly self-motivated with a proactive, problem-solving attitude Must hold a full and valid UK driving licence Benefits Competitive salary Company vehicle + mobile provided 32 days annual leave Life assurance To apply, please send a copy of your CV and a covering letter to alex com or, alternatively, submit your application via the link below Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
We currently have an exciting opportunity for a Senior Mechanical Building Services Engineer to join my client's facilities team on a large commercial estate in the heart of West London. This is a permanent full-time position working 40 hours per week, from 0800 to 1700, Mon to Fri. The role: Reporting to the Maintenance Supervisor To provide technical engineering support within the Hard FM Services department by carrying out preventative maintenance to deadline plus maintain paperwork to support PPM activities To respond to reactive and emergency faults and conduct reactive maintenance work to ensure compliance with KPI's To manage sub-contractors as necessary working to a safe system of work and permit-to-work system To undertake AP/RP duties for the disciplines for which you have been appointed Working 40 hours per week, Monday to Friday with a requirement to participate in the out of hours on call rota and be able to respond/attend site within one hour of the call The person: Must hold a recognised mechanical trade apprenticeship and/or relevant qualifications to level 3 (theory and practice) in a relevant mechanical discipline with suitable industry experience; AP in HV desirable Previous supervisory and mentoring experience essential Experience in building services maintenance is essential Willingness to attain cross skilling and IT Literate Excellent customer service and communication skills Demonstrate good planning, organising and prioritising skills Ability to show examples of using initiative and judgement to resolve problems Experience in a Healthcare environment an advantage Must have a good understanding of health & safety best practice; formal training an advantage Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Jul 25, 2025
Full time
We currently have an exciting opportunity for a Senior Mechanical Building Services Engineer to join my client's facilities team on a large commercial estate in the heart of West London. This is a permanent full-time position working 40 hours per week, from 0800 to 1700, Mon to Fri. The role: Reporting to the Maintenance Supervisor To provide technical engineering support within the Hard FM Services department by carrying out preventative maintenance to deadline plus maintain paperwork to support PPM activities To respond to reactive and emergency faults and conduct reactive maintenance work to ensure compliance with KPI's To manage sub-contractors as necessary working to a safe system of work and permit-to-work system To undertake AP/RP duties for the disciplines for which you have been appointed Working 40 hours per week, Monday to Friday with a requirement to participate in the out of hours on call rota and be able to respond/attend site within one hour of the call The person: Must hold a recognised mechanical trade apprenticeship and/or relevant qualifications to level 3 (theory and practice) in a relevant mechanical discipline with suitable industry experience; AP in HV desirable Previous supervisory and mentoring experience essential Experience in building services maintenance is essential Willingness to attain cross skilling and IT Literate Excellent customer service and communication skills Demonstrate good planning, organising and prioritising skills Ability to show examples of using initiative and judgement to resolve problems Experience in a Healthcare environment an advantage Must have a good understanding of health & safety best practice; formal training an advantage Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Join a Legacy of Excellence as a Build Technician Location: Daventry Contract Basis: Ongoing (Inside IR35) Pay Rate: £30.00 per hour (Umbrella PAYE) Do you dream of crafting world-class vehicles and seeing your work shine on some of the most iconic roads in the world? If so, this is your chance to join a luxury automotive brand celebrated for its bespoke restorations and unmatched attention to detail. At our client s state-of-the-art facility, you ll work with a passionate team of master craftsmen to bring exceptional automotive visions to life. This is more than a job it s an opportunity to leave your mark on history as a Build Technician. Why Join? Craftsmanship Meets Innovation: Be part of a company that combines timeless designs with modern engineering excellence. Prestigious Projects: Work on iconic, high-value vehicles that set the standard in automotive luxury. Supportive Culture: Experience an inclusive team environment in a bright, modern facility. Rewarding Work: Enjoy competitive pay, opportunities for overtime, and the chance to transition to a permanent role. Long-term Opportunity: Initial contract role with scope for Permanent Opportunities Your Role as a Build Technician You ll play a pivotal role in the end-to-end build process of bespoke, high-value vehicles. From component assembly to final touches, your craftsmanship will ensure each vehicle exceeds the highest quality standards. Key Responsibilities: Full vehicle preparation, assembly, and build, with a focus on Trim and Final Assembly. Mechanical and electrical tasks, including: Building components and sub-assemblies from scratch. Ground-up assembly of whole vehicles within a bay-build environment. Installation of interior trim packages. Diagnosing and logging build issues while contributing to engineering improvements. Reading and interpreting technical drawings. Working with precision tools and components. This is a rare opportunity for a Build Technician to join a company where quality comes first. What We re Looking For You re not just skilled you re passionate about excellence. If you have hands-on experience with whole vehicles and thrive in high-quality, detail-oriented environments, this is your ideal role. The Ideal Build Technician Will Have: Extensive experience in vehicle assembly and build, preferably in classic vehicle restoration or motorsports. A strong engineering background with problem-solving skills. An eye for detail and commitment to quality. Proficiency with tools, technical drawings, and precision components. Flexibility to adapt to overtime and dynamic challenges. Knowledge of H&S, COSHH, and environmental standards. Hours & Pay: Hours: Day Shift: Monday Thursday (7:00 AM 4:30 PM), Friday (7:00 AM 12.45 PM). Overtime opportunities available. Umbrella Pay: £30 per hour paid via PAYE Umbrella model Please note , this role is deemed inside of IR35. The Umbrella pay rate offered is inclusive of the Assignment pay rate, holiday pay and Apex Recruitments contribution towards Employer Costs. Ready to Join the Team? If this sounds like your dream role, we d love to hear from you! Apply now with your CV, and a member of our team will contact you to discuss the next steps. Rest assured, all applications are handled with the utmost confidentiality. Key Skills: Vehicle Technician / Mechanic / Whole Vehicle Build / Vehicle Assembly / Maintenance and Repair / Mechanical Repairs / Electrical Repairs
Jul 25, 2025
Contractor
Join a Legacy of Excellence as a Build Technician Location: Daventry Contract Basis: Ongoing (Inside IR35) Pay Rate: £30.00 per hour (Umbrella PAYE) Do you dream of crafting world-class vehicles and seeing your work shine on some of the most iconic roads in the world? If so, this is your chance to join a luxury automotive brand celebrated for its bespoke restorations and unmatched attention to detail. At our client s state-of-the-art facility, you ll work with a passionate team of master craftsmen to bring exceptional automotive visions to life. This is more than a job it s an opportunity to leave your mark on history as a Build Technician. Why Join? Craftsmanship Meets Innovation: Be part of a company that combines timeless designs with modern engineering excellence. Prestigious Projects: Work on iconic, high-value vehicles that set the standard in automotive luxury. Supportive Culture: Experience an inclusive team environment in a bright, modern facility. Rewarding Work: Enjoy competitive pay, opportunities for overtime, and the chance to transition to a permanent role. Long-term Opportunity: Initial contract role with scope for Permanent Opportunities Your Role as a Build Technician You ll play a pivotal role in the end-to-end build process of bespoke, high-value vehicles. From component assembly to final touches, your craftsmanship will ensure each vehicle exceeds the highest quality standards. Key Responsibilities: Full vehicle preparation, assembly, and build, with a focus on Trim and Final Assembly. Mechanical and electrical tasks, including: Building components and sub-assemblies from scratch. Ground-up assembly of whole vehicles within a bay-build environment. Installation of interior trim packages. Diagnosing and logging build issues while contributing to engineering improvements. Reading and interpreting technical drawings. Working with precision tools and components. This is a rare opportunity for a Build Technician to join a company where quality comes first. What We re Looking For You re not just skilled you re passionate about excellence. If you have hands-on experience with whole vehicles and thrive in high-quality, detail-oriented environments, this is your ideal role. The Ideal Build Technician Will Have: Extensive experience in vehicle assembly and build, preferably in classic vehicle restoration or motorsports. A strong engineering background with problem-solving skills. An eye for detail and commitment to quality. Proficiency with tools, technical drawings, and precision components. Flexibility to adapt to overtime and dynamic challenges. Knowledge of H&S, COSHH, and environmental standards. Hours & Pay: Hours: Day Shift: Monday Thursday (7:00 AM 4:30 PM), Friday (7:00 AM 12.45 PM). Overtime opportunities available. Umbrella Pay: £30 per hour paid via PAYE Umbrella model Please note , this role is deemed inside of IR35. The Umbrella pay rate offered is inclusive of the Assignment pay rate, holiday pay and Apex Recruitments contribution towards Employer Costs. Ready to Join the Team? If this sounds like your dream role, we d love to hear from you! Apply now with your CV, and a member of our team will contact you to discuss the next steps. Rest assured, all applications are handled with the utmost confidentiality. Key Skills: Vehicle Technician / Mechanic / Whole Vehicle Build / Vehicle Assembly / Maintenance and Repair / Mechanical Repairs / Electrical Repairs
This job posting isn't available in all website languages If you are a person with a disability and need assistance applying for a job, please submit a request. At Trane Technologies TM and through our businesses including Trane and Thermo King , we create innovative climate solutions for buildings, homes, and transportation that challenge what's possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go. Position Overview: Depot Operative is responsible for providing the highest standards of maintenance in the most efficient manner to maintain, adjust, set up and evaluate products before re-hiring or installation. The primary focus of the role is the preparation of hire cooling equipment and ancillaries (pumps, heat exchangers). The goal is to maximize productivity and enhance the overall customer experience and improve operational technical processes. Role will also review goods in/out in an efficient and timely manner. Based at our new warehouse based in Birmingham area UK. Key Responsibilities: Customer and Technical: Ability to diagnose system problems when servicing products and testing equipment. Maintenance of cleaning and servicing good ready to rehire back to customers Collaboration with hire and service desks, Sales, and Operations Team: Establish strong communication channels to share key customer insights. Able to use innovative software and technology, along with a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units. Modifications for specific customer requirements Ability to follow health and safety loading and unloading of delivery vehicles and storage of fluids and equipment for commercial HVAC products and services. Communications with supervisors, regions hire and operations managers and senior technicians, and customers on updates and to drive continuous improvement. Internal Controls and Administration: Strong knowledge of customer service principles. Effective communication skills Analytical thinking and problem-solving abilities. Understand depot processes and HSE procedures and storing of goods and services Proficiency in using, Apps, diagnostic software, and MS Office Suite. On call and late board working rota Skills and Capabilities: Knowledge of the manufacturing industry is an advantage. Electrical/mechanical applied engineering an advantage People and communication skills with a positive mindset Appropriate skilled based certificates with F-Gas an advantage Gas safety and advantage Able to cover the depot standby and call outs on a planned scheduled basis to include weekdays, weekends, and bank holidays. Forklift driving is an advantage. UK Drivers' licence Right to Work status confirmed for Country of application for the duration of employment You can look forward to: Competitive salary and benefits including pension, healthcare, life insurance and wellbeing platforms. A fast-paced working environment An excellent working culture and community A structured induction plan with continued learning and development. A key role where you can make a direct contribution to our business. We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status. Previous Job Searches My Profile Create and manage profiles for future opportunities. Please beware of potential recruitment scams. We don't hire via Telegram. REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 469272 Trane Technologies is a diverse and inclusive environment. We are an equal opportunity employer and are dedicated to hiring qualified protected veterans and individuals with disabilities.
Jul 25, 2025
Full time
This job posting isn't available in all website languages If you are a person with a disability and need assistance applying for a job, please submit a request. At Trane Technologies TM and through our businesses including Trane and Thermo King , we create innovative climate solutions for buildings, homes, and transportation that challenge what's possible for a sustainable world. We're a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go. Position Overview: Depot Operative is responsible for providing the highest standards of maintenance in the most efficient manner to maintain, adjust, set up and evaluate products before re-hiring or installation. The primary focus of the role is the preparation of hire cooling equipment and ancillaries (pumps, heat exchangers). The goal is to maximize productivity and enhance the overall customer experience and improve operational technical processes. Role will also review goods in/out in an efficient and timely manner. Based at our new warehouse based in Birmingham area UK. Key Responsibilities: Customer and Technical: Ability to diagnose system problems when servicing products and testing equipment. Maintenance of cleaning and servicing good ready to rehire back to customers Collaboration with hire and service desks, Sales, and Operations Team: Establish strong communication channels to share key customer insights. Able to use innovative software and technology, along with a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units. Modifications for specific customer requirements Ability to follow health and safety loading and unloading of delivery vehicles and storage of fluids and equipment for commercial HVAC products and services. Communications with supervisors, regions hire and operations managers and senior technicians, and customers on updates and to drive continuous improvement. Internal Controls and Administration: Strong knowledge of customer service principles. Effective communication skills Analytical thinking and problem-solving abilities. Understand depot processes and HSE procedures and storing of goods and services Proficiency in using, Apps, diagnostic software, and MS Office Suite. On call and late board working rota Skills and Capabilities: Knowledge of the manufacturing industry is an advantage. Electrical/mechanical applied engineering an advantage People and communication skills with a positive mindset Appropriate skilled based certificates with F-Gas an advantage Gas safety and advantage Able to cover the depot standby and call outs on a planned scheduled basis to include weekdays, weekends, and bank holidays. Forklift driving is an advantage. UK Drivers' licence Right to Work status confirmed for Country of application for the duration of employment You can look forward to: Competitive salary and benefits including pension, healthcare, life insurance and wellbeing platforms. A fast-paced working environment An excellent working culture and community A structured induction plan with continued learning and development. A key role where you can make a direct contribution to our business. We offer competitive compensation and comprehensive benefits and programs. We are an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, marital status, disability, status as a protected veteran, or any legally protected status. Previous Job Searches My Profile Create and manage profiles for future opportunities. Please beware of potential recruitment scams. We don't hire via Telegram. REGISTERED IN IRELAND WITH LIMITED LIABILITY REGISTERED NUMBER 469272 Trane Technologies is a diverse and inclusive environment. We are an equal opportunity employer and are dedicated to hiring qualified protected veterans and individuals with disabilities.
Job Title: Saw Operator Location: Redhill, RH1 5NB Salary: 26,000 per annum Job Type: Permanent, Full Time - 2 Shifts Available Shifts: Mon-Fri (Apply online only) (40 hrs/week) Mon-Thur (Apply online only) (40 hrs/week) Please note due to the office location access to your own vehicle is required as the office is not readily accessible via public transport, free parking is provided on site. About us: At Kiyo Engineering, we take pride in delivering quality engineering and design solutions that meet the specific requirements of our clients. For more than a decade, we've been providing exceptional welding and fabrication services, specialising in the manufacturing of aluminium, stainless steel, mild steel, and engineering plastics, supported by a wide range of high-specification, precision-driven CNC machinery. We are passionate about our craft and are committed to our clients and continue to offer quality, professional and individually tailored solutions supported by unrivalled craftsmanship. About the role: Reporting to the Saw Team Leader, the Saw Operator is responsible for the production of saw cut parts by loading and unloading various saw machines; maintaining quality and safety standards; keeping records as appropriate and assisting in the maintenance of equipment. The operator will ensure continuity of production in the saw room, maintaining required specifications within agreed timeframes. About your day to day: Preparing and operating the circular, manual and auto band saws to perform manufacturing tasks Preparing and loading raw materials into the saw machines Completing raw material paperwork and checklists Inspecting and measuring finished products and comparing them with technical and quality requirements to ensure correct completion of the process together with de-burring, shuffling, and cleaning of finished parts as necessary and saw operations as required, respecting all advised schedules and timelines for production In consultation with the Production Manager and Saw Team Leader, ensuring all machines remain well stocked with continuity of production at all times Strictly adhering to all health and safety procedures Demonstrating a strong team approach ensuring clear communication with colleagues at all levels Adhering to SOP's (Standard Operating Procedures) To be responsible and fully accountable for ensuring all completed parts conform with all specifications and quality deliverables as appropriate Ensures that every machine process is undertaken in compliance with the company guidelines Maintains continuity among work shift by communicating actions, irregularities, and continuing needs Maintains equipment by completing preventative maintenance requirements; follows manufacturer's instructions; troubleshoots machines Ensures saws are maintained through daily cleaning and predetermined maintenance activities To ensure efficient operation of the saw area in achieving specified agreed targets To participate in daily production meetings with the team detailing production targets, quality concerns and any other focus points identified To achieve throughput against stated targets Undertaking any other duties as may be required by the Management team About you: Must be a team player and have the ability to work well with others Must have a safety conscious mindset Previous experience in saw operation is desired by not necessary Passion for manufacturing Must have or be willing to have a license in the operation of Forklift Trucks (Refresher training is provided on site) Willingness to take on additional training as required by the business What we offer Free parking Bonus scheme Overtime available Pension scheme Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; Saw Technician, Metal Manufacturing Engineer, CNC Machinist, CNC Operator, CNC Machine Setter Operator, Mechanical Engineer, Machine Technician will also be considered for this role.
Jul 25, 2025
Full time
Job Title: Saw Operator Location: Redhill, RH1 5NB Salary: 26,000 per annum Job Type: Permanent, Full Time - 2 Shifts Available Shifts: Mon-Fri (Apply online only) (40 hrs/week) Mon-Thur (Apply online only) (40 hrs/week) Please note due to the office location access to your own vehicle is required as the office is not readily accessible via public transport, free parking is provided on site. About us: At Kiyo Engineering, we take pride in delivering quality engineering and design solutions that meet the specific requirements of our clients. For more than a decade, we've been providing exceptional welding and fabrication services, specialising in the manufacturing of aluminium, stainless steel, mild steel, and engineering plastics, supported by a wide range of high-specification, precision-driven CNC machinery. We are passionate about our craft and are committed to our clients and continue to offer quality, professional and individually tailored solutions supported by unrivalled craftsmanship. About the role: Reporting to the Saw Team Leader, the Saw Operator is responsible for the production of saw cut parts by loading and unloading various saw machines; maintaining quality and safety standards; keeping records as appropriate and assisting in the maintenance of equipment. The operator will ensure continuity of production in the saw room, maintaining required specifications within agreed timeframes. About your day to day: Preparing and operating the circular, manual and auto band saws to perform manufacturing tasks Preparing and loading raw materials into the saw machines Completing raw material paperwork and checklists Inspecting and measuring finished products and comparing them with technical and quality requirements to ensure correct completion of the process together with de-burring, shuffling, and cleaning of finished parts as necessary and saw operations as required, respecting all advised schedules and timelines for production In consultation with the Production Manager and Saw Team Leader, ensuring all machines remain well stocked with continuity of production at all times Strictly adhering to all health and safety procedures Demonstrating a strong team approach ensuring clear communication with colleagues at all levels Adhering to SOP's (Standard Operating Procedures) To be responsible and fully accountable for ensuring all completed parts conform with all specifications and quality deliverables as appropriate Ensures that every machine process is undertaken in compliance with the company guidelines Maintains continuity among work shift by communicating actions, irregularities, and continuing needs Maintains equipment by completing preventative maintenance requirements; follows manufacturer's instructions; troubleshoots machines Ensures saws are maintained through daily cleaning and predetermined maintenance activities To ensure efficient operation of the saw area in achieving specified agreed targets To participate in daily production meetings with the team detailing production targets, quality concerns and any other focus points identified To achieve throughput against stated targets Undertaking any other duties as may be required by the Management team About you: Must be a team player and have the ability to work well with others Must have a safety conscious mindset Previous experience in saw operation is desired by not necessary Passion for manufacturing Must have or be willing to have a license in the operation of Forklift Trucks (Refresher training is provided on site) Willingness to take on additional training as required by the business What we offer Free parking Bonus scheme Overtime available Pension scheme Please click on the APPLY button to send your CV and Cover Letter for this role. Candidates with experience of; Saw Technician, Metal Manufacturing Engineer, CNC Machinist, CNC Operator, CNC Machine Setter Operator, Mechanical Engineer, Machine Technician will also be considered for this role.
Three Shires Ltd are specialist contractors to the Construction, Rail, Utilities, Highways, and Civil Infrastructure sectors. For over 20 years Three Shires has developed long standing relationships with the UK s leading House Builders, Construction Contractors, Civil Engineers, Developers, Environmental and Ecological Consultants. Our services include Ecological, Vegetation Clearance, Invasive Weed, Tree Protection, Site Hoarding and Security Fencing we also undertake all other aspects of site enablement. We are looking to recruit a Workshop Mechanic of Ground Maintenance Machinery with excellent problem-solving skills In order to be successful in this role you will need to have the following experience: Repairing/servicing 2 and 4 stroke engines/ground maintenance machinery Conducting routine services and inspections of machinery, including Chainsaws, Brush Cutters/Strimmer s, Lawnmowers, and Hedge Trimmers Ability to diagnose and repair mechanical issues on machinery Perform set up on new or used equipment Servicing of and checking motor vehicles prior to MOT would be advantageous Responsibilities include: Maintain accurate records of all repairs and services performed Collaborate with the team to ensure efficient workflow in the workshop Ability to work independently and as part of a team Follow company Health & Safety regulations Workshop Mechanic Package: Circa. £30K Overtime 28 Days paid holiday Company pension If you are interested in the Mechanic/Technician role, please email your CV in confidence to me in the first instance, I will contact you to have a confidential chat
Jul 25, 2025
Full time
Three Shires Ltd are specialist contractors to the Construction, Rail, Utilities, Highways, and Civil Infrastructure sectors. For over 20 years Three Shires has developed long standing relationships with the UK s leading House Builders, Construction Contractors, Civil Engineers, Developers, Environmental and Ecological Consultants. Our services include Ecological, Vegetation Clearance, Invasive Weed, Tree Protection, Site Hoarding and Security Fencing we also undertake all other aspects of site enablement. We are looking to recruit a Workshop Mechanic of Ground Maintenance Machinery with excellent problem-solving skills In order to be successful in this role you will need to have the following experience: Repairing/servicing 2 and 4 stroke engines/ground maintenance machinery Conducting routine services and inspections of machinery, including Chainsaws, Brush Cutters/Strimmer s, Lawnmowers, and Hedge Trimmers Ability to diagnose and repair mechanical issues on machinery Perform set up on new or used equipment Servicing of and checking motor vehicles prior to MOT would be advantageous Responsibilities include: Maintain accurate records of all repairs and services performed Collaborate with the team to ensure efficient workflow in the workshop Ability to work independently and as part of a team Follow company Health & Safety regulations Workshop Mechanic Package: Circa. £30K Overtime 28 Days paid holiday Company pension If you are interested in the Mechanic/Technician role, please email your CV in confidence to me in the first instance, I will contact you to have a confidential chat
Service Technician We're looking for an experienced service technician to join a well-established, business specialising in horticultural and ground care machinery. You will carry out servicing and repairs on a range of horticultural machinery. This is a field-based role, requiring travel to customer sites. A company vehicle will be provided for all work-related travel. Knowledge of horticultural machinery is an advantage Knowledge of domestic and professional grass machinery Perform routine maintenance and repair work on horticultural machinery for a wide range of customers Identify and resolve mechanical issues, delivering both servicing and effective repair solutions Use diagnostic tools and software to troubleshoot hydraulic and electrical system faults Work independently with minimal supervision, while also contributing effectively within a team environment Capable of manual handling, with a sensible approach to lifting heavy items safely Communicate clearly and professionally with colleagues, suppliers, and clients Confident using computers and relevant software systems Provide outstanding customer service, both in person and over the phone Highly self-motivated with a proactive, problem-solving attitude Must hold a full and valid UK driving licence Benefits Competitive salary Company vehicle + mobile provided 32 days annual leave Life assurance To apply, please send a copy of your CV and a covering letter to alex com or, alternatively, submit your application via the link below Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
Jul 24, 2025
Full time
Service Technician We're looking for an experienced service technician to join a well-established, business specialising in horticultural and ground care machinery. You will carry out servicing and repairs on a range of horticultural machinery. This is a field-based role, requiring travel to customer sites. A company vehicle will be provided for all work-related travel. Knowledge of horticultural machinery is an advantage Knowledge of domestic and professional grass machinery Perform routine maintenance and repair work on horticultural machinery for a wide range of customers Identify and resolve mechanical issues, delivering both servicing and effective repair solutions Use diagnostic tools and software to troubleshoot hydraulic and electrical system faults Work independently with minimal supervision, while also contributing effectively within a team environment Capable of manual handling, with a sensible approach to lifting heavy items safely Communicate clearly and professionally with colleagues, suppliers, and clients Confident using computers and relevant software systems Provide outstanding customer service, both in person and over the phone Highly self-motivated with a proactive, problem-solving attitude Must hold a full and valid UK driving licence Benefits Competitive salary Company vehicle + mobile provided 32 days annual leave Life assurance To apply, please send a copy of your CV and a covering letter to alex com or, alternatively, submit your application via the link below Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.
Bring Energy is recruiting a fulltime Mobile HIU Technician Our Company Bringing sustainable heating and cooling to people and businesses across city scale networks, whilst working with policy makers, developers, and suppliers to decarbonise heating for customers, communities, and teams across the UK. The business was acquired by a consortium of shareholders, Swiss Life Asset Management and Schroders Greencoat LLP on 31 December 2023 and recently rebranded to become Bring Energy Limited. Our People Culture is everything to us, as we embark on our transitional journey alongside our 170 colleagues, we will ensure we remain open, transparent and supportive, whilst aligning our behaviours to our new Company values. Our ultimate aspiration is to become an employer of choice within the sector, ensuring we are in strong position to attract and retain the best talent by creating a positive working environment where individuals can thrive. Our role Mobile HIU Technician Location: London (Battersea Power Station) Business Area /Function Reports to HIU Team Manager Salary £36 - £40K Working Arrangements: Total hours of work are 40 per week, working 8.30am to 5.00pm with a 30-minute unpaid lunch break, 5 days out of 7. Your working pattern will be determined by the local shift rota. Overtime and on call rotas apply to this job role as well. This is a full-time role for a Mobile HIU Technician in the London area. As a Mobile HIU Technician you will be responsible for the day-to-day tasks associated with heat interface units, including planned and reactive maintenance. You will work closely with the service desk team to ensure high level of service to our residential customers. The team of engineers will have a wide spread of skills and experience, from qualified HIU Technician with years of experience to Junior employees who will be new to the industry. As a fully qualified HIU technician, there will be a chance for you to train/ mentor a Junior Technician. The team will be managed by a HIU Team Manager who is responsible for the overall coordination of the team and will work closely with you to achieve your goals and objective set together to help you increase your skills and grow within the company. Responsibilities and Deliverables • HIU/CIU Inspections and reactive maintenance for loss of heat or cooling within the required timeframe of our Residential Supply Agreements. • To carry out repairs identified during servicing including removal/replacement of pumps, valves, and actuators plus bleeding systems. • Updating work orders in a timely manner and in accordance with company training via our asset management system. • Liaising with our service desk to ensure any on hold jobs are rebooked and closed out as soon as possible. • In charge of your own van stock and responsible to contact management when critical parts are required. • Working in a safe manner and in accordance with the company's Health & Safety policy • Proactively help and support others to achieve team objectives. • Heat meters works such as replacing battery, replacing meter itself or investigating why error codes are appearing on meters with the internal Metering Team. • Reporting of PPMs/ Reactive jobs completed, on hold or requiring further action from other teams on a bi-weekly to management. • Ensure the company escalation process is understood and followed when further action is required to reinstate heat / cooling to a residential property, outside the remit of your job description i.e. plant room temperatures are low. • Deliver a first-class service to customers. • Effectively prioritise and perform tasks under pressure. • Mentor Junior Technicians when required Role Requirements • Proven experience in working in the plumbing or HVAC industry. (minimum of two year of experience) • Ability to work independently or as part of a team. • Good communication skills, both verbal & written. • Experience with working in a residential environment. • Strong technical knowledge and experience in communal and district heating systems. • Experience in maintenance and troubleshooting of heat interface units (HIUs). • Preferred but not required to be qualified to ND / City & Guilds/ NVQ level 3 in Mechanical is a plus. • Has a passion and interest in learning about emerging technologies within the Energy Market and supporting the drive to Net Zero. • Basic working knowledge of Microsoft Office including, Outlook, Excel, Word. • Full UK driving licence • A positive attitude towards work and willingness to get tasks completed on time whilst managing conflicting deadlines. Candidate Requirements • Right to work in the UK. • Full DBS check
Jul 24, 2025
Full time
Bring Energy is recruiting a fulltime Mobile HIU Technician Our Company Bringing sustainable heating and cooling to people and businesses across city scale networks, whilst working with policy makers, developers, and suppliers to decarbonise heating for customers, communities, and teams across the UK. The business was acquired by a consortium of shareholders, Swiss Life Asset Management and Schroders Greencoat LLP on 31 December 2023 and recently rebranded to become Bring Energy Limited. Our People Culture is everything to us, as we embark on our transitional journey alongside our 170 colleagues, we will ensure we remain open, transparent and supportive, whilst aligning our behaviours to our new Company values. Our ultimate aspiration is to become an employer of choice within the sector, ensuring we are in strong position to attract and retain the best talent by creating a positive working environment where individuals can thrive. Our role Mobile HIU Technician Location: London (Battersea Power Station) Business Area /Function Reports to HIU Team Manager Salary £36 - £40K Working Arrangements: Total hours of work are 40 per week, working 8.30am to 5.00pm with a 30-minute unpaid lunch break, 5 days out of 7. Your working pattern will be determined by the local shift rota. Overtime and on call rotas apply to this job role as well. This is a full-time role for a Mobile HIU Technician in the London area. As a Mobile HIU Technician you will be responsible for the day-to-day tasks associated with heat interface units, including planned and reactive maintenance. You will work closely with the service desk team to ensure high level of service to our residential customers. The team of engineers will have a wide spread of skills and experience, from qualified HIU Technician with years of experience to Junior employees who will be new to the industry. As a fully qualified HIU technician, there will be a chance for you to train/ mentor a Junior Technician. The team will be managed by a HIU Team Manager who is responsible for the overall coordination of the team and will work closely with you to achieve your goals and objective set together to help you increase your skills and grow within the company. Responsibilities and Deliverables • HIU/CIU Inspections and reactive maintenance for loss of heat or cooling within the required timeframe of our Residential Supply Agreements. • To carry out repairs identified during servicing including removal/replacement of pumps, valves, and actuators plus bleeding systems. • Updating work orders in a timely manner and in accordance with company training via our asset management system. • Liaising with our service desk to ensure any on hold jobs are rebooked and closed out as soon as possible. • In charge of your own van stock and responsible to contact management when critical parts are required. • Working in a safe manner and in accordance with the company's Health & Safety policy • Proactively help and support others to achieve team objectives. • Heat meters works such as replacing battery, replacing meter itself or investigating why error codes are appearing on meters with the internal Metering Team. • Reporting of PPMs/ Reactive jobs completed, on hold or requiring further action from other teams on a bi-weekly to management. • Ensure the company escalation process is understood and followed when further action is required to reinstate heat / cooling to a residential property, outside the remit of your job description i.e. plant room temperatures are low. • Deliver a first-class service to customers. • Effectively prioritise and perform tasks under pressure. • Mentor Junior Technicians when required Role Requirements • Proven experience in working in the plumbing or HVAC industry. (minimum of two year of experience) • Ability to work independently or as part of a team. • Good communication skills, both verbal & written. • Experience with working in a residential environment. • Strong technical knowledge and experience in communal and district heating systems. • Experience in maintenance and troubleshooting of heat interface units (HIUs). • Preferred but not required to be qualified to ND / City & Guilds/ NVQ level 3 in Mechanical is a plus. • Has a passion and interest in learning about emerging technologies within the Energy Market and supporting the drive to Net Zero. • Basic working knowledge of Microsoft Office including, Outlook, Excel, Word. • Full UK driving licence • A positive attitude towards work and willingness to get tasks completed on time whilst managing conflicting deadlines. Candidate Requirements • Right to work in the UK. • Full DBS check
Wind Turbine Technician - UK Location: Field-based - with UK-wide travel Salary: £30,000 - £45,000 (depending on experience) Employment Type: Permanent, Full-Time Join a growing force in the UK's independent wind energy sector. We're partnering with a leading renewable energy services company that is expanding its operations team and currently seeking an experienced Wind Turbine Technician to support its growing UK portfolio - with a particular focus on small to mid-scale turbines such as the Vestas V27 and similar platforms (225kW-850kW range). This is a fantastic opportunity to join a team committed to delivering high-quality service, turbine uptime, and the UK's clean energy transition. The Role: You'll be responsible for servicing, maintaining, and repairing wind turbines across the UK, with a strong presence in the South East. The role involves extensive travel and regular work in remote areas - ideal for a hands-on technician with strong problem-solving skills and turbine-specific experience. Key Responsibilities: Conduct planned and reactive maintenance on wind turbines Specialise in smaller platforms, particularly the Vestas V27 Fault-finding on mechanical, electrical, and hydraulic systems Work on refurbishment, component upgrades, and inspections Provide clear, accurate reporting and follow HSE protocols Travel across the UK with overnight stays as required ? About You: Technically qualified (electrical, mechanical, or renewables) Hands-on experience with Vestas V27 or similar turbine types Comfortable working at height and in remote conditions Strong diagnostic and problem-solving abilities GWO certification desirable (Working at Height, First Aid, etc.) Full UK Driving Licence What's on Offer: £35,000 - £45,000 salary (depending on experience) 30 days' holiday (rising to 35 with service) Pension scheme and sick pay Tools, PPE, vehicle, and full training provided A stable, growing company with a focus on quality and long-term careers Interested in learning more? This position is being managed exclusively by AGR's Renewable & Clean Energy division . For a confidential conversation, get in touch!
Jul 24, 2025
Full time
Wind Turbine Technician - UK Location: Field-based - with UK-wide travel Salary: £30,000 - £45,000 (depending on experience) Employment Type: Permanent, Full-Time Join a growing force in the UK's independent wind energy sector. We're partnering with a leading renewable energy services company that is expanding its operations team and currently seeking an experienced Wind Turbine Technician to support its growing UK portfolio - with a particular focus on small to mid-scale turbines such as the Vestas V27 and similar platforms (225kW-850kW range). This is a fantastic opportunity to join a team committed to delivering high-quality service, turbine uptime, and the UK's clean energy transition. The Role: You'll be responsible for servicing, maintaining, and repairing wind turbines across the UK, with a strong presence in the South East. The role involves extensive travel and regular work in remote areas - ideal for a hands-on technician with strong problem-solving skills and turbine-specific experience. Key Responsibilities: Conduct planned and reactive maintenance on wind turbines Specialise in smaller platforms, particularly the Vestas V27 Fault-finding on mechanical, electrical, and hydraulic systems Work on refurbishment, component upgrades, and inspections Provide clear, accurate reporting and follow HSE protocols Travel across the UK with overnight stays as required ? About You: Technically qualified (electrical, mechanical, or renewables) Hands-on experience with Vestas V27 or similar turbine types Comfortable working at height and in remote conditions Strong diagnostic and problem-solving abilities GWO certification desirable (Working at Height, First Aid, etc.) Full UK Driving Licence What's on Offer: £35,000 - £45,000 salary (depending on experience) 30 days' holiday (rising to 35 with service) Pension scheme and sick pay Tools, PPE, vehicle, and full training provided A stable, growing company with a focus on quality and long-term careers Interested in learning more? This position is being managed exclusively by AGR's Renewable & Clean Energy division . For a confidential conversation, get in touch!
STEM Recruitment is offering a fantastic opportunity for an Electrically Biased Maintenance Engineer to join a highly regarded client in the Scottish Borders. In this role, you'll be responsible for both reactive and planned maintenance, ensuring production lines run efficiently with minimal downtime. Your expertise in fault diagnosis and hands-on maintenance-whether electrical, mechanical, or both-will be key to keeping operations smooth. You'll also take part in planned preventative maintenance and contribute to process improvement projects aimed at boosting overall productivity and efficiency. The ideal candidate will have electrical bias or be multi-skilled, with proven experience in maintenance within a manufacturing environment. This role operates on a 4 on, 4 off rotational shift pattern, covering both day and night shifts. STEM Recruitment Solutions Ltd operates as both a Recruitment Agency and a Recruitment Business. We endeavour to reply to all applications when possible however on occasions this may not be possible due to volumes of responses. STEM Recruitment is a Scientific, Engineering and Manufacturing Recruitment business supplying talented staff to permanent and temporary opportunities
Jul 24, 2025
Full time
STEM Recruitment is offering a fantastic opportunity for an Electrically Biased Maintenance Engineer to join a highly regarded client in the Scottish Borders. In this role, you'll be responsible for both reactive and planned maintenance, ensuring production lines run efficiently with minimal downtime. Your expertise in fault diagnosis and hands-on maintenance-whether electrical, mechanical, or both-will be key to keeping operations smooth. You'll also take part in planned preventative maintenance and contribute to process improvement projects aimed at boosting overall productivity and efficiency. The ideal candidate will have electrical bias or be multi-skilled, with proven experience in maintenance within a manufacturing environment. This role operates on a 4 on, 4 off rotational shift pattern, covering both day and night shifts. STEM Recruitment Solutions Ltd operates as both a Recruitment Agency and a Recruitment Business. We endeavour to reply to all applications when possible however on occasions this may not be possible due to volumes of responses. STEM Recruitment is a Scientific, Engineering and Manufacturing Recruitment business supplying talented staff to permanent and temporary opportunities
Randstad Construction & Property
Cambridge, Cambridgeshire
Electrical Shift Maintenance Engineer - Cambridge - 4 on 4 off Days Only! Are you a skilled Electrical Engineer looking for a stable, full-time role with a leading facilities management company? We have an excellent opportunity for an Electrical Shift Maintenance Engineer to join our team on a static site in Cambridge , offering a competitive salary of up to 45,000 per annum . As an Electrical Shift Maintenance Engineer, you'll be responsible for ensuring the efficient operation and maintenance of electrical systems within a large, critical environment. This is a fantastic chance to work with a dedicated team and advance your career within a well-established organisation. What you'll be doing: As a Shift Technician, you'll undertake planned preventative maintenance, testing, repairs, and new installation work covering a wide range of equipment, services, and systems. Your key responsibilities will include: Complying with all Health Statutory and Technical Regulatory Memorandums (HTM) requirements, including Health Building and Safety Notifications (HBN) and health and safety legislation for SFS. Working safely on ELV/LV electrical systems in accordance with all statutory electrical and health and safety legislation and regulations as an appointed Competent Person (LV) . Taking responsibility for the maintenance of equipment, plant, services, and systems, including undertaking inspection and testing of electrical and mechanical equipment and installations (including portable appliances). Working safely on mechanical systems in accordance with all statutory mechanical regulations and health and safety legislation and regulations as an appointed Competent Person for SFS on one or more of the following systems: Boiler & Pressure Systems, Medical Gas, and Confined Spaces . What you'll bring to the role: To be successful in this role, you'll need a strong electrical background and relevant qualifications, including: Certificate in 17th Edition IEE Regulation (Current) . As defined by the latest edition of The Electrical Safety Code for Low Voltage Systems for Competent Person (LV) . If you're a proactive and skilled Electrical Shift Maintenance Engineer looking for a challenging yet rewarding role within a critical environment, we encourage you to apply! Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Jul 24, 2025
Full time
Electrical Shift Maintenance Engineer - Cambridge - 4 on 4 off Days Only! Are you a skilled Electrical Engineer looking for a stable, full-time role with a leading facilities management company? We have an excellent opportunity for an Electrical Shift Maintenance Engineer to join our team on a static site in Cambridge , offering a competitive salary of up to 45,000 per annum . As an Electrical Shift Maintenance Engineer, you'll be responsible for ensuring the efficient operation and maintenance of electrical systems within a large, critical environment. This is a fantastic chance to work with a dedicated team and advance your career within a well-established organisation. What you'll be doing: As a Shift Technician, you'll undertake planned preventative maintenance, testing, repairs, and new installation work covering a wide range of equipment, services, and systems. Your key responsibilities will include: Complying with all Health Statutory and Technical Regulatory Memorandums (HTM) requirements, including Health Building and Safety Notifications (HBN) and health and safety legislation for SFS. Working safely on ELV/LV electrical systems in accordance with all statutory electrical and health and safety legislation and regulations as an appointed Competent Person (LV) . Taking responsibility for the maintenance of equipment, plant, services, and systems, including undertaking inspection and testing of electrical and mechanical equipment and installations (including portable appliances). Working safely on mechanical systems in accordance with all statutory mechanical regulations and health and safety legislation and regulations as an appointed Competent Person for SFS on one or more of the following systems: Boiler & Pressure Systems, Medical Gas, and Confined Spaces . What you'll bring to the role: To be successful in this role, you'll need a strong electrical background and relevant qualifications, including: Certificate in 17th Edition IEE Regulation (Current) . As defined by the latest edition of The Electrical Safety Code for Low Voltage Systems for Competent Person (LV) . If you're a proactive and skilled Electrical Shift Maintenance Engineer looking for a challenging yet rewarding role within a critical environment, we encourage you to apply! Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Jonathan Lee Recruitment Ltd
Wavendon, Bedfordshire
Test and Operations Team Lead (Mechanical) - Aerospace and Defence Permanent Long Term - Milton Keynes Area Attractive An opportunity has arisen for Test and Operations Team Lead to join an Aerospace and Defence Organisation within the Milton Keynes area. The successful Test and Operations Team Lead will lead and manage a team of mechanical technicians, research engineers, and operators within an Aerodynamics and Test Department. The Test and Operations Team Lead is crucial to the successful delivery of aerodynamic test programmes across the company facilities. The Test and Operations Team Lead will be responsible for the mechanical assembly, preparation, and maintenance of models, rigs, and test equipment, as well as the coordination and development of a skilled and effective team. The Test and Operations Team Lead will work closely with key stakeholders across the business ensuring high standards of safety, quality, and efficiency are met, whilst also fostering a culture of continuous improvement. This Test and Operations Team Lead role is an excellent opportunity for someone ready to take the next step into a technical leadership position or further develop their management career in a unique, hands-on engineering environment. If you are passionate about precision engineering, developing people, and delivering high-quality testing then this is a great option for you. Responsibilities of the Test and Operations Team Lead (Mechanical) Leading a small team including line management, performance reviews, training & planning. Planning and coordinating the team s work across facilities to meet schedules and budgets. Mechanical assembly and rig preparation for aerodynamic test campaigns. Maintenance of test rigs, equipment & workspaces to ensure safe and consistent operation. Ensure the availability of tools, spares, and consumables. Liaise with Project Managers & Technical Leads to prioritise & allocate resource effectively. Develop and maintain a skills matrix for the team, supporting their technical growth. Promote a clean, safe, and high-performing working environment. Lead the documentation of processes, risk assessments, and method statements. Work with Design & Instrumentation teams to support development and improvements. Qualifications, Knowledge, and Skills Required - Test and Operations Team Lead (Mechanical) Qualified to Degree, HND, or NVQ Level 5 (or equivalent experience) in Mechanical Engineering or a related field. Experience in a relevant aerospace test environment, with hands-on experience assembling and maintaining mechanical and electro-mechanical test equipment. Experience with high-pressure air systems and hydraulics is highly desirable. Strong communication and organisational skills, with the ability to coach and support others. A proactive and collaborative approach, with drive to deliver results & continuously improve. Competent in planning tools and Microsoft Office (or equivalent). Flexible attitude towards shift work (when and if required) and evolving business needs. There are excellent opportunities for career development. This is an exciting permanent opportunity for the right person to be part of a successful and highly skilled engineering company, working 40 hours per week, Monday to Friday. In return our client offers a range of benefits including: Competitive salary and pension scheme Free parking and shares incentive plan Employee assistance programme Private health insurance 26 days annual leave plus Bank Holidays (increasing after 5 year's service) The successful candidate must be a British National able to satisfy security clearance (SC) requirements including last 5 years continual UK residency due to projects/products involved If you feel you meet the requirements for the role of the Test and Operations Team Lead (Mechanical), then apply directly or contact Peter Heap at Jonathan Lee Recruitment . Either Direct Line (phone number removed) or Email suitable MS Word CV s to (url removed) Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Jul 24, 2025
Full time
Test and Operations Team Lead (Mechanical) - Aerospace and Defence Permanent Long Term - Milton Keynes Area Attractive An opportunity has arisen for Test and Operations Team Lead to join an Aerospace and Defence Organisation within the Milton Keynes area. The successful Test and Operations Team Lead will lead and manage a team of mechanical technicians, research engineers, and operators within an Aerodynamics and Test Department. The Test and Operations Team Lead is crucial to the successful delivery of aerodynamic test programmes across the company facilities. The Test and Operations Team Lead will be responsible for the mechanical assembly, preparation, and maintenance of models, rigs, and test equipment, as well as the coordination and development of a skilled and effective team. The Test and Operations Team Lead will work closely with key stakeholders across the business ensuring high standards of safety, quality, and efficiency are met, whilst also fostering a culture of continuous improvement. This Test and Operations Team Lead role is an excellent opportunity for someone ready to take the next step into a technical leadership position or further develop their management career in a unique, hands-on engineering environment. If you are passionate about precision engineering, developing people, and delivering high-quality testing then this is a great option for you. Responsibilities of the Test and Operations Team Lead (Mechanical) Leading a small team including line management, performance reviews, training & planning. Planning and coordinating the team s work across facilities to meet schedules and budgets. Mechanical assembly and rig preparation for aerodynamic test campaigns. Maintenance of test rigs, equipment & workspaces to ensure safe and consistent operation. Ensure the availability of tools, spares, and consumables. Liaise with Project Managers & Technical Leads to prioritise & allocate resource effectively. Develop and maintain a skills matrix for the team, supporting their technical growth. Promote a clean, safe, and high-performing working environment. Lead the documentation of processes, risk assessments, and method statements. Work with Design & Instrumentation teams to support development and improvements. Qualifications, Knowledge, and Skills Required - Test and Operations Team Lead (Mechanical) Qualified to Degree, HND, or NVQ Level 5 (or equivalent experience) in Mechanical Engineering or a related field. Experience in a relevant aerospace test environment, with hands-on experience assembling and maintaining mechanical and electro-mechanical test equipment. Experience with high-pressure air systems and hydraulics is highly desirable. Strong communication and organisational skills, with the ability to coach and support others. A proactive and collaborative approach, with drive to deliver results & continuously improve. Competent in planning tools and Microsoft Office (or equivalent). Flexible attitude towards shift work (when and if required) and evolving business needs. There are excellent opportunities for career development. This is an exciting permanent opportunity for the right person to be part of a successful and highly skilled engineering company, working 40 hours per week, Monday to Friday. In return our client offers a range of benefits including: Competitive salary and pension scheme Free parking and shares incentive plan Employee assistance programme Private health insurance 26 days annual leave plus Bank Holidays (increasing after 5 year's service) The successful candidate must be a British National able to satisfy security clearance (SC) requirements including last 5 years continual UK residency due to projects/products involved If you feel you meet the requirements for the role of the Test and Operations Team Lead (Mechanical), then apply directly or contact Peter Heap at Jonathan Lee Recruitment . Either Direct Line (phone number removed) or Email suitable MS Word CV s to (url removed) Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency. In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.
Assistant Facilities Manager Integral UK is one of the UK's leading technical maintenance providers and part of JLL. We deliver high-quality facilities management and engineering solutions across multiple sectors including commercial, healthcare, education, and retail. Our team is committed to excellence, innovation, and sustainability in all aspects of facilities management. Role Overview We are seeking an experienced Assistant Facilities Manager to join our dynamic team. The successful candidate will support the Facilities Manager in delivering exceptional hard and soft services across our client portfolio. This role requires a versatile professional who can balance technical knowledge with strong people management skills to ensure optimal facility performance and client satisfaction. Key Responsibilities Hard Services Management Assist in the oversight of mechanical, electrical, and building fabric maintenance Support the implementation of planned preventative maintenance (PPM) programs Monitor building management systems (BMS) and coordinate responses to technical issues Ensure compliance with relevant building regulations and technical standards Participate in energy efficiency initiatives and sustainability projects Soft Services Management Coordinate cleaning, security, reception, and catering services Manage waste management and recycling programs Oversee space planning and utilization Monitor service level agreements (SLAs) for all contracted services Conduct regular quality audits of soft services provision Porter management General Management Support the Facilities Manager in day-to-day operations Manage and develop a team of facilities coordinators and/or technicians Assist with budget preparation and monitor expenditure Maintain accurate records using CAFM systems Develop and maintain strong relationships with clients and contractors Respond to and resolve facilities-related queries and incidents Ensure compliance with health, safety, and environmental regulations Participate in continuous improvement initiatives Qualifications & Experience Minimum 3-5 years' experience in facilities management, with demonstrable experience in both hard and soft services Strong technical understanding of building systems and maintenance requirements Experience managing service contractors and in-house teams Working knowledge of health and safety legislation and compliance requirements Proficiency with CAFM systems and Microsoft Office applications IOSH Managing Safely certification (or willingness to obtain) Skills & Attributes Excellent communication and interpersonal skills Strong problem-solving abilities and proactive approach Effective time management and prioritization skills Customer service orientation with a commitment to excellence Ability to work under pressure and manage multiple priorities Team leadership capabilities Commercial awareness and budget management skills
Jul 24, 2025
Full time
Assistant Facilities Manager Integral UK is one of the UK's leading technical maintenance providers and part of JLL. We deliver high-quality facilities management and engineering solutions across multiple sectors including commercial, healthcare, education, and retail. Our team is committed to excellence, innovation, and sustainability in all aspects of facilities management. Role Overview We are seeking an experienced Assistant Facilities Manager to join our dynamic team. The successful candidate will support the Facilities Manager in delivering exceptional hard and soft services across our client portfolio. This role requires a versatile professional who can balance technical knowledge with strong people management skills to ensure optimal facility performance and client satisfaction. Key Responsibilities Hard Services Management Assist in the oversight of mechanical, electrical, and building fabric maintenance Support the implementation of planned preventative maintenance (PPM) programs Monitor building management systems (BMS) and coordinate responses to technical issues Ensure compliance with relevant building regulations and technical standards Participate in energy efficiency initiatives and sustainability projects Soft Services Management Coordinate cleaning, security, reception, and catering services Manage waste management and recycling programs Oversee space planning and utilization Monitor service level agreements (SLAs) for all contracted services Conduct regular quality audits of soft services provision Porter management General Management Support the Facilities Manager in day-to-day operations Manage and develop a team of facilities coordinators and/or technicians Assist with budget preparation and monitor expenditure Maintain accurate records using CAFM systems Develop and maintain strong relationships with clients and contractors Respond to and resolve facilities-related queries and incidents Ensure compliance with health, safety, and environmental regulations Participate in continuous improvement initiatives Qualifications & Experience Minimum 3-5 years' experience in facilities management, with demonstrable experience in both hard and soft services Strong technical understanding of building systems and maintenance requirements Experience managing service contractors and in-house teams Working knowledge of health and safety legislation and compliance requirements Proficiency with CAFM systems and Microsoft Office applications IOSH Managing Safely certification (or willingness to obtain) Skills & Attributes Excellent communication and interpersonal skills Strong problem-solving abilities and proactive approach Effective time management and prioritization skills Customer service orientation with a commitment to excellence Ability to work under pressure and manage multiple priorities Team leadership capabilities Commercial awareness and budget management skills
