Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering London and surrounding areas. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Jul 16, 2025
Full time
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering London and surrounding areas. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering London and surrounding areas. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Jul 16, 2025
Full time
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering London and surrounding areas. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering the Home Counties region. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Jul 16, 2025
Full time
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering the Home Counties region. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering the Home Counties region. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Jul 16, 2025
Full time
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering the Home Counties region. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering London and surrounding areas. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Jul 15, 2025
Full time
Who we are Carrier is the world's leader in high-technology heating, air-conditioning, and refrigeration solutions, with over 100 years of proven innovation. We solve complex problems on a global scale, and our groundbreaking innovations continue to drive new industries forward. About the role We are seeking an experienced Chiller Engineer to join our team covering London and surrounding areas. This is an excellent opportunity to work with cutting-edge HVAC technology, providing high-quality service and support to our valued customers. What you will be doing You will primarily be responsible for troubleshooting, servicing, and commissioning industrial water chillers. You will work independently and as part of a team, providing technical support for breakdowns, installations, and maintenance. Respond to service calls efficiently, conducting risk assessments before work. Perform maintenance, repair, and fault diagnosis on a variety of Carrier and third-party chillers, including air-cooled, water-cooled, screw, scroll, centrifugal, and reciprocating systems. Diagnose and rectify electrical and mechanical faults, troubleshoot complex technical issues both on-site and remotely, and interpret wiring diagrams, P&ID drawings, and pressure enthalpy diagrams. Commission standard and large-capacity chillers, ensuring system-wide installation compliance and providing technical advice to customers. Work closely with customers, attend meetings, and offer expert technical guidance with minimal supervision. Oversee technicians on large sites, support junior engineers and apprentices, and assist Carrier's Training Manager in delivering technical courses. Ensure adherence to F-Gas regulations and health & safety standards, and provide clear service reports via our digital platform. Act as an SME in areas such as centrifugal compressor rebuilds, absorption chillers, and chiller sequencing controls. What we are looking for City & Guilds Qualification in Refrigeration and Air Conditioning F-Gas Qualified (Category 1) HNC / ONC in Refrigeration and Air Conditioning (preferred) Experience with Carrier and other manufacturers' Chillers and equipment. Ability to work on commercial and industrial HVAC systems, troubleshooting complex breakdowns. Full UK Driving Licence (or equivalent). Strong understanding of refrigeration circuits, thermodynamics, and control systems. Experience working in a Technician or Engineer role in the HVAC industry. Benefits Competitive salary package (Negotiable DOE) Enhanced payments through lead generation, travel time, overtime and on-call Company Vehicle 25 Days Holiday + bank holiday + holiday purchase scheme Company Pension Great career progression opportunities, development and continuous training offered Work on industry-leading equipment and use state of the art tools At Carrier, we are committed to excellence, innovation, and sustainability. As a part of our team, you'll be working for a global leader that invests in your professional growth and supports your career ambitions. If you are an experienced Chiller Engineer looking for a challenging and rewarding role, we would love to hear from you! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice:
Quinteq are looking for a Senior HVAC Engineer to work full time on the Bespak pharmaceutical site in Holmes Chapel, CW4 8BE. The salary range for this permanent onsite role is between £42,000 and £48,620 (£43,800 and £50,420 with scheduled call out retainer) plus overtime at time and a half for call outs paid door to door, and a discretionary annual bonus. You will receive a company van, 28 days holiday which includes bank holidays which can rise to 33 with time served additions, pension, healthcare, dental and optical cover. Working Pattern Monday to Friday 08:00 to 16:30 Call Out Rota 1 week every month, +£150 for the week, retainer + overtime at time and a half, paid door to door. There will also be occasional call out cover needed outside of rota for holidays etc. As a Quinteq Senior HVAC Engineer, you'll be the go-to expert for all HVAC and refrigeration systems at our Holmes Chapel pharmaceutical site. You will lead the on-site team, ensuring efficient completion of planned preventative maintenance and reactive repairs across a variety of equipment. Your responsibilities include meticulous record-keeping and close collaboration with the on-site facilities team and our Mechanical Service Manager to coordinate current and future projects. This role offers a fantastic opportunity to showcase your leadership and technical skills in a dynamic environment. As a Senior HVAC Engineer, your duties will include: Perform planned preventative maintenance on HVAC equipment. Complete and submit all required paperwork promptly. Carry out service and repair work across the site. Organize the on-site team for efficient work completion. Liaise with facilities team regarding completed and upcoming work. Organize work and ensure service reports are submitted. Senior HVAC Engineer, key skills and experience: Essential: Proven experience as a HVAC/refrigeration engineer. C&G 2079 refrigeration handling certificate. Possess a full UK, valid driving license. Desirable: IPAF qualification and experience Skill card/ CSCS card PASMA qualification and experience. Senior HVAC Engineer Benefits: 28 days holiday inclusive of bank holidays (rising to 33), Pension, Healthcare, dental, Optical. As a company we provide: Uniform and PPE Company van and fuel card. Laptop and smart phone. Holmes Chapel is a beautiful village in Cheshire with excellent transport links via its railway station on the Crewe-Manchester Line. The village has a population of nearly 7,000 and offers various amenities, including supermarkets, shops, restaurants, schools, and a GP practice. This role could suit someone with experience as a HVAC Supervisor, Lead HVAC Technician, Senior Refrigeration Engineer, Facilities Engineer HVAC Biased, or Commissioning engineer (heating, ventilation and air conditioning biased). HVAC engineer looking to further their career and progress to a role with greater responsibility. At Quinteq we deliver top-tier electrical services, from minor repairs to major nationwide projects, providing complete support from design to maintenance. Our commitment to excellence means we go the extra mile to ensure total customer satisfaction and on-time project delivery. We invest in our employees' professional development and the future of our industry through a robust apprenticeship program. Our diverse project portfolio demonstrates our expertise and dedication to meeting all electrical needs. A full job description can be downloaded on the application Screen. Strictly No Agencies - We manage all of our positions internally. JBRP1_UKTJ
Feb 19, 2025
Full time
Quinteq are looking for a Senior HVAC Engineer to work full time on the Bespak pharmaceutical site in Holmes Chapel, CW4 8BE. The salary range for this permanent onsite role is between £42,000 and £48,620 (£43,800 and £50,420 with scheduled call out retainer) plus overtime at time and a half for call outs paid door to door, and a discretionary annual bonus. You will receive a company van, 28 days holiday which includes bank holidays which can rise to 33 with time served additions, pension, healthcare, dental and optical cover. Working Pattern Monday to Friday 08:00 to 16:30 Call Out Rota 1 week every month, +£150 for the week, retainer + overtime at time and a half, paid door to door. There will also be occasional call out cover needed outside of rota for holidays etc. As a Quinteq Senior HVAC Engineer, you'll be the go-to expert for all HVAC and refrigeration systems at our Holmes Chapel pharmaceutical site. You will lead the on-site team, ensuring efficient completion of planned preventative maintenance and reactive repairs across a variety of equipment. Your responsibilities include meticulous record-keeping and close collaboration with the on-site facilities team and our Mechanical Service Manager to coordinate current and future projects. This role offers a fantastic opportunity to showcase your leadership and technical skills in a dynamic environment. As a Senior HVAC Engineer, your duties will include: Perform planned preventative maintenance on HVAC equipment. Complete and submit all required paperwork promptly. Carry out service and repair work across the site. Organize the on-site team for efficient work completion. Liaise with facilities team regarding completed and upcoming work. Organize work and ensure service reports are submitted. Senior HVAC Engineer, key skills and experience: Essential: Proven experience as a HVAC/refrigeration engineer. C&G 2079 refrigeration handling certificate. Possess a full UK, valid driving license. Desirable: IPAF qualification and experience Skill card/ CSCS card PASMA qualification and experience. Senior HVAC Engineer Benefits: 28 days holiday inclusive of bank holidays (rising to 33), Pension, Healthcare, dental, Optical. As a company we provide: Uniform and PPE Company van and fuel card. Laptop and smart phone. Holmes Chapel is a beautiful village in Cheshire with excellent transport links via its railway station on the Crewe-Manchester Line. The village has a population of nearly 7,000 and offers various amenities, including supermarkets, shops, restaurants, schools, and a GP practice. This role could suit someone with experience as a HVAC Supervisor, Lead HVAC Technician, Senior Refrigeration Engineer, Facilities Engineer HVAC Biased, or Commissioning engineer (heating, ventilation and air conditioning biased). HVAC engineer looking to further their career and progress to a role with greater responsibility. At Quinteq we deliver top-tier electrical services, from minor repairs to major nationwide projects, providing complete support from design to maintenance. Our commitment to excellence means we go the extra mile to ensure total customer satisfaction and on-time project delivery. We invest in our employees' professional development and the future of our industry through a robust apprenticeship program. Our diverse project portfolio demonstrates our expertise and dedication to meeting all electrical needs. A full job description can be downloaded on the application Screen. Strictly No Agencies - We manage all of our positions internally. JBRP1_UKTJ
Service Engineer / Field Service Technician / Compressor Engineer required to join a global leading engineering air manufacturer. The Successful Service Engineer / Field Service Technician / Compressor Engineer will provide electrical and mechanical repair, service and maintenance on compressed air equipment including compressors, vacuum pumps, blowers & dryers, nitrogen generators and associated compressed air products at customer sites across the South West UK. Full product training provided. The Service Engineer / Field Service Technician / Compressor Enginee r will ideally have a field service background in electrical or mechanical engineering such as compressors, filtration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps, motors, rotating equipment, turbines, refrigeration, hydraulics, pneumatics, robotics or similar electro mechanical engineering equipment. Good working knowledge of three phase electrics and controls is advantageous. Package 30,000- 36,000 depending on experience Company van - door to door pay Company phone and laptop 25 days holiday + bank holidays Company pension Overtime Additional benefits Service Engineer / Field Service Technician / Compressor Engineer Role To provide electrical and mechanical repair, service and maintenance of compressed air equipment at customer sites across the South West - Bristol, Gloucester, Cardiff, Bath, Taunton, Plymouth, Devon, Cornwall and surrounding areas. The Compressor Service Engineer will undertake planned and preventative maintenance, provide advice, diagnostics, fault finding of compressed air systems, vacuum pumps, blowers & dryers, nitrogen generators and other compressed air products. Maintain, repair and install air compressors, vacuum pumps, blowers & dryers, nitrogen generators and other compressed air and pneumatic equipment across the South West UK. Installing compressed air/water & nitrogen pipelines into all forms of the manufacturing industry. Perform emergency breakdown fault finding and repairs on various compressed air equipment. Commute to the office near Yate 2 times a week for parts collection and training. Liaise with various engineering departments. Service Engineer / Field Service Technician / Compressor Engineer Requirements Proven diagnostic skills on complicated electrical and mechanical engineering systems. Experience as a Field Service Engineer / Service Engineer / Service Technician / Installation Engineer / Compressor Engineer / Mechanical Engineer / M&E Engineer / Electrical Engineer or similar. The ability in maintaining good professional working relationships with existing and new customers. Field servicing background in compressors, filtration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps. motors, rotating equipment, hydraulics, pneumatics, robotics, capital equipment and / or electro mechanical engineering equipment. Full product training provided. Good working knowledge of three phase electrics and controls is advantageous. A technical engineering degree / qualification, apprentice trained, FGAS certification or simialr would be advantageous. Willingness to travel and commute to Yate occasionally to collect parts etc.
Jan 30, 2025
Full time
Service Engineer / Field Service Technician / Compressor Engineer required to join a global leading engineering air manufacturer. The Successful Service Engineer / Field Service Technician / Compressor Engineer will provide electrical and mechanical repair, service and maintenance on compressed air equipment including compressors, vacuum pumps, blowers & dryers, nitrogen generators and associated compressed air products at customer sites across the South West UK. Full product training provided. The Service Engineer / Field Service Technician / Compressor Enginee r will ideally have a field service background in electrical or mechanical engineering such as compressors, filtration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps, motors, rotating equipment, turbines, refrigeration, hydraulics, pneumatics, robotics or similar electro mechanical engineering equipment. Good working knowledge of three phase electrics and controls is advantageous. Package 30,000- 36,000 depending on experience Company van - door to door pay Company phone and laptop 25 days holiday + bank holidays Company pension Overtime Additional benefits Service Engineer / Field Service Technician / Compressor Engineer Role To provide electrical and mechanical repair, service and maintenance of compressed air equipment at customer sites across the South West - Bristol, Gloucester, Cardiff, Bath, Taunton, Plymouth, Devon, Cornwall and surrounding areas. The Compressor Service Engineer will undertake planned and preventative maintenance, provide advice, diagnostics, fault finding of compressed air systems, vacuum pumps, blowers & dryers, nitrogen generators and other compressed air products. Maintain, repair and install air compressors, vacuum pumps, blowers & dryers, nitrogen generators and other compressed air and pneumatic equipment across the South West UK. Installing compressed air/water & nitrogen pipelines into all forms of the manufacturing industry. Perform emergency breakdown fault finding and repairs on various compressed air equipment. Commute to the office near Yate 2 times a week for parts collection and training. Liaise with various engineering departments. Service Engineer / Field Service Technician / Compressor Engineer Requirements Proven diagnostic skills on complicated electrical and mechanical engineering systems. Experience as a Field Service Engineer / Service Engineer / Service Technician / Installation Engineer / Compressor Engineer / Mechanical Engineer / M&E Engineer / Electrical Engineer or similar. The ability in maintaining good professional working relationships with existing and new customers. Field servicing background in compressors, filtration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps. motors, rotating equipment, hydraulics, pneumatics, robotics, capital equipment and / or electro mechanical engineering equipment. Full product training provided. Good working knowledge of three phase electrics and controls is advantageous. A technical engineering degree / qualification, apprentice trained, FGAS certification or simialr would be advantageous. Willingness to travel and commute to Yate occasionally to collect parts etc.
Job Title: Air Conditioning Maintenance Technician Location: (London) Contract: ( offices) Salary: (40K-47K Per Annum) A hands-on Air Conditioning engineer is required to ensure all environmental conditions are maintained at all times with regard to critical building systems to carry out Planned Preventative Maintenance (PPM), reactive and breakdown works to all AC units within the site. Engineer must be able to demonstrate relevant knowledge of Chillers, CRAC units, Split A/C units, VRV's and VRF's, FCU's and AHU's or equivalent which will include the ability to fault find using the production of graphical information and the utilisation of current alarm data. Responsibilities: Responsible for the maintenance and repairs of AC units around the various sites, within set time frames so that customer expectations are met. Reactive call outs as and when required. To actively undertaken proactive maintenance work identified across the account anddivision as required. Effective H&S compliance and to report of any breaches to H&S compliance. Ensure that routine PPM is carried out to all AC plant in accordance with Site task schedules and asset lists. Ensure that reactive tasks throughout the portfolio are completed and be proactive in highlighting areas where improvements can be made. Complete all logbooks and F-Gas registers as required in order to ensure fully compliance with law and approved code of practice. Ensure that suitable spares are available to carry out both maintenance and reactive works. To provide parts lists and estimated timescales to carry out remedial works. Overtime working as required Ensure that all relevant paperwork and F-Gas register is completed regarding PPM, reactive and breakdown works and that it is passed without delay to the contract administrator. Package: Salary: Up to (40K - 47K) per annum. Holiday: Generous 33 days leave. Pension: Secure your future with our comprehensive pension plan. Working Hours: (Monday to Friday 8:00 AM to 5:00 PM) Requirements: C&G/NVQ Level 2/3 in refrigeration and air conditioning C&G 2079 - F-Gas Level 1 Strong electrical knowledge in addition to mechanical bias Why Join Us? Be part of a dynamic team working on prestigious site Enjoy a competitive salary with a range of benefits. Develop your skills and career with ongoing training and sup Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Jan 29, 2025
Full time
Job Title: Air Conditioning Maintenance Technician Location: (London) Contract: ( offices) Salary: (40K-47K Per Annum) A hands-on Air Conditioning engineer is required to ensure all environmental conditions are maintained at all times with regard to critical building systems to carry out Planned Preventative Maintenance (PPM), reactive and breakdown works to all AC units within the site. Engineer must be able to demonstrate relevant knowledge of Chillers, CRAC units, Split A/C units, VRV's and VRF's, FCU's and AHU's or equivalent which will include the ability to fault find using the production of graphical information and the utilisation of current alarm data. Responsibilities: Responsible for the maintenance and repairs of AC units around the various sites, within set time frames so that customer expectations are met. Reactive call outs as and when required. To actively undertaken proactive maintenance work identified across the account anddivision as required. Effective H&S compliance and to report of any breaches to H&S compliance. Ensure that routine PPM is carried out to all AC plant in accordance with Site task schedules and asset lists. Ensure that reactive tasks throughout the portfolio are completed and be proactive in highlighting areas where improvements can be made. Complete all logbooks and F-Gas registers as required in order to ensure fully compliance with law and approved code of practice. Ensure that suitable spares are available to carry out both maintenance and reactive works. To provide parts lists and estimated timescales to carry out remedial works. Overtime working as required Ensure that all relevant paperwork and F-Gas register is completed regarding PPM, reactive and breakdown works and that it is passed without delay to the contract administrator. Package: Salary: Up to (40K - 47K) per annum. Holiday: Generous 33 days leave. Pension: Secure your future with our comprehensive pension plan. Working Hours: (Monday to Friday 8:00 AM to 5:00 PM) Requirements: C&G/NVQ Level 2/3 in refrigeration and air conditioning C&G 2079 - F-Gas Level 1 Strong electrical knowledge in addition to mechanical bias Why Join Us? Be part of a dynamic team working on prestigious site Enjoy a competitive salary with a range of benefits. Develop your skills and career with ongoing training and sup Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.
Site Operations Risk Controller London Continental shift pattern Up to 60k Resourcing Group have an exciting opportunity to join a company specialising in technical services, FM, regeneration and energy services. Position Concept Provision of all-round engineering support, maintaining the Operational Assets at Commerzbank AG London Branch. You should have a detailed understanding of all new or current building services systems and contingency procedures within the buildings, and also complying with the Health & Safety/building codes of practice. It is the Site Operations Risk Controller's role to act as a coordination point for the day-to-day activities, on site, of the Operations Team, specialist service partners and other support teams, including completion of the necessary permits to work and risk assessments, ensuring that conduct of all personnel under your control is safe, professional and conscientious. You will be responsible for ensuring that all Engineering Operational activities within the building are controlled and that they are being carried out with due regard to Health and Safety, business risk and maintaining the 100% uptime criteria. As SORC you will be the authorized person on site for LV/HV operations on your shift or any you may be covering as requested by Management once appointed as AP. Responsible for maintaining excellent standards of response to Asset performance, completion of assigned work and ensure any abnormal operating conditions and housekeeping issues are dealt with proficiently. Personal Qualities Minimum 7 years' experience in Building Services industry LV/HV Authorized Person Experience (Valid Certificate desirable) C&G Electrical Level 3 equivalent or C&G Mechanical Level 3 equivalent or exceeds (desirable) 18th Edition IEE: Wiring and C&G 2391 test and inspection or equivalent (desirable). Strong communication skills and the ability to deal with all levels of Demonstrate a good understanding and be technically competent in all building services, in particular UPS, Generators, Static Switches, Water Treatment, Refrigeration and Air Conditioning. Ability to lead, motivate and direct a team of technicians/operatives. Proactive in achieving the highest standard of Key Tasks Duties to include: Supervise, coordinate and manage the Site Technicians, ensuring that the Operational Team undertake PPM or reactive works in accordance with the agreed timescale, providing technical support and leadership for the site Technicians. Allocate PPM tasks to operations Operate all systems within the buildings in a competent, effective and efficient manner (including HV operations). Controlling all activities being undertaken within the campus Liaising with the site team to make them aware of d Specialist Service Provider visits prepare and have approved Standard Operating Procedures/PTW in advance of these visits. Ensure that Specialist Service Provider (SSP's) worksheets are signed off where necessary that quality of work has been inspected and recommendations are escalated to the Site Management Team. Maintain effective shift handovers including critical plant status, plant isolations, issues arising, ongoing works, special task requests, and standard of housekeeping. Maintain effective reporting on incidents onsite in line with site process and escalation Carry out 2 MSV's minimum (3rd party contractor and inhouse monitoring of ppm and reactive activity) per month Ensure any parts required are clearly and accurately stated and any difficulties encountered on engineering activities are reported to the TSM. Plant areas, workshops, stores, changing/rest areas are kept to the highest level of housekeeping Ensure the SSP's comply with the contractual service level agreements (SLA's). Act as Duty AP on shift providing resilience for emergency and planned LV/HV switching Be prepared to write Safety Switching Programs if required by Management once AP authorization process has been completed. Be prepared to write EOPs/MOPs if required by Management once site familiarization process has been completed. Ensure all record keeping functions are completed on a Daily basis: Timesheets completed fully, signed (Monthly). PPM allocation and Ensure shift handover (through the Shift Change over ) is completed Before leaving site, updating the status of any out of hour's helpdesk tasks in the appropriate Incident In house staff and contractor ppm/reactive activity monitoring Holidays, sickness and time Issue of work permits when required Operation and troubleshooting for the following: Building Management Lighting Control Air conditioning system, Chilled Beams, FCU,s. AHU's variable Boilers and heating Generators and Single phase and three phase UPS system and associated control Emergency Operation of LV/HV systems (training and familiarization with this system will be made available). Interested? Contact Liv Longstaff-Browne (url removed) Resourcing Group is acting as an Employment Agency in relation to this vacancy.
Jan 29, 2025
Full time
Site Operations Risk Controller London Continental shift pattern Up to 60k Resourcing Group have an exciting opportunity to join a company specialising in technical services, FM, regeneration and energy services. Position Concept Provision of all-round engineering support, maintaining the Operational Assets at Commerzbank AG London Branch. You should have a detailed understanding of all new or current building services systems and contingency procedures within the buildings, and also complying with the Health & Safety/building codes of practice. It is the Site Operations Risk Controller's role to act as a coordination point for the day-to-day activities, on site, of the Operations Team, specialist service partners and other support teams, including completion of the necessary permits to work and risk assessments, ensuring that conduct of all personnel under your control is safe, professional and conscientious. You will be responsible for ensuring that all Engineering Operational activities within the building are controlled and that they are being carried out with due regard to Health and Safety, business risk and maintaining the 100% uptime criteria. As SORC you will be the authorized person on site for LV/HV operations on your shift or any you may be covering as requested by Management once appointed as AP. Responsible for maintaining excellent standards of response to Asset performance, completion of assigned work and ensure any abnormal operating conditions and housekeeping issues are dealt with proficiently. Personal Qualities Minimum 7 years' experience in Building Services industry LV/HV Authorized Person Experience (Valid Certificate desirable) C&G Electrical Level 3 equivalent or C&G Mechanical Level 3 equivalent or exceeds (desirable) 18th Edition IEE: Wiring and C&G 2391 test and inspection or equivalent (desirable). Strong communication skills and the ability to deal with all levels of Demonstrate a good understanding and be technically competent in all building services, in particular UPS, Generators, Static Switches, Water Treatment, Refrigeration and Air Conditioning. Ability to lead, motivate and direct a team of technicians/operatives. Proactive in achieving the highest standard of Key Tasks Duties to include: Supervise, coordinate and manage the Site Technicians, ensuring that the Operational Team undertake PPM or reactive works in accordance with the agreed timescale, providing technical support and leadership for the site Technicians. Allocate PPM tasks to operations Operate all systems within the buildings in a competent, effective and efficient manner (including HV operations). Controlling all activities being undertaken within the campus Liaising with the site team to make them aware of d Specialist Service Provider visits prepare and have approved Standard Operating Procedures/PTW in advance of these visits. Ensure that Specialist Service Provider (SSP's) worksheets are signed off where necessary that quality of work has been inspected and recommendations are escalated to the Site Management Team. Maintain effective shift handovers including critical plant status, plant isolations, issues arising, ongoing works, special task requests, and standard of housekeeping. Maintain effective reporting on incidents onsite in line with site process and escalation Carry out 2 MSV's minimum (3rd party contractor and inhouse monitoring of ppm and reactive activity) per month Ensure any parts required are clearly and accurately stated and any difficulties encountered on engineering activities are reported to the TSM. Plant areas, workshops, stores, changing/rest areas are kept to the highest level of housekeeping Ensure the SSP's comply with the contractual service level agreements (SLA's). Act as Duty AP on shift providing resilience for emergency and planned LV/HV switching Be prepared to write Safety Switching Programs if required by Management once AP authorization process has been completed. Be prepared to write EOPs/MOPs if required by Management once site familiarization process has been completed. Ensure all record keeping functions are completed on a Daily basis: Timesheets completed fully, signed (Monthly). PPM allocation and Ensure shift handover (through the Shift Change over ) is completed Before leaving site, updating the status of any out of hour's helpdesk tasks in the appropriate Incident In house staff and contractor ppm/reactive activity monitoring Holidays, sickness and time Issue of work permits when required Operation and troubleshooting for the following: Building Management Lighting Control Air conditioning system, Chilled Beams, FCU,s. AHU's variable Boilers and heating Generators and Single phase and three phase UPS system and associated control Emergency Operation of LV/HV systems (training and familiarization with this system will be made available). Interested? Contact Liv Longstaff-Browne (url removed) Resourcing Group is acting as an Employment Agency in relation to this vacancy.
Multi-Skilled Maintenance Engineer Location: Bletchley, Buckinghamshire Shift Pattern: 4 On, 4 Off Salary: Up to £53,000 per annum Are you a Multi-Skilled Maintenance Engineer ready to take on a new challenge? If you're looking for a rewarding role where you can showcase your skills, this could be the perfect opportunity for you. Our client, a leading food production company, is seeking a talented engineer to join their team and support operations with advanced machinery. The Role As a Multi-Skilled Maintenance Engineer, you'll be an integral part of ensuring the efficient operation of high-performance production equipment. Your responsibilities will include: Performing both electrical and mechanical maintenance to keep machinery running at optimal levels. Diagnosing and resolving faults, especially with PLC systems. Working with a range of systems, including pneumatics, hydraulics, pumps, valves, ovens, mixers, pressure systems, and refrigeration. Carrying out planned preventative maintenance (PPM) and reducing the need for reactive maintenance. Supporting production teams to maintain smooth operations and minimise downtime. What You'll Bring To excel in this role, you'll need: Proven experience in electrical and mechanical maintenance, ideally within the food production or manufacturing sectors. Technical expertise in PLC systems and working in a continuous improvement or PPM environment. Qualifications such as a BTEC/ONC in electrical engineering, or a time-served apprenticeship/HNC in electrical, mechanical, or production maintenance engineering. A proactive approach with the ability to quickly respond to and resolve breakdowns. Why This Opportunity? Competitive salary and benefits package. Ongoing career development and training within a forward-thinking company. Work with modern technology in a dynamic and supportive team environment. Be part of a culture focused on continuous improvement and operational excellence. Who Should Apply? This role is ideal for Maintenance Engineers, Technicians, or anyone with relevant experience looking to take on a new challenge in a growing and innovative company. If you're looking for a chance to make a real impact, we'd love to hear from you. How to Apply Excited to take your career further? Submit your CV today, and we'll be in touch to discuss how this opportunity could be the perfect fit for you.
Jan 29, 2025
Full time
Multi-Skilled Maintenance Engineer Location: Bletchley, Buckinghamshire Shift Pattern: 4 On, 4 Off Salary: Up to £53,000 per annum Are you a Multi-Skilled Maintenance Engineer ready to take on a new challenge? If you're looking for a rewarding role where you can showcase your skills, this could be the perfect opportunity for you. Our client, a leading food production company, is seeking a talented engineer to join their team and support operations with advanced machinery. The Role As a Multi-Skilled Maintenance Engineer, you'll be an integral part of ensuring the efficient operation of high-performance production equipment. Your responsibilities will include: Performing both electrical and mechanical maintenance to keep machinery running at optimal levels. Diagnosing and resolving faults, especially with PLC systems. Working with a range of systems, including pneumatics, hydraulics, pumps, valves, ovens, mixers, pressure systems, and refrigeration. Carrying out planned preventative maintenance (PPM) and reducing the need for reactive maintenance. Supporting production teams to maintain smooth operations and minimise downtime. What You'll Bring To excel in this role, you'll need: Proven experience in electrical and mechanical maintenance, ideally within the food production or manufacturing sectors. Technical expertise in PLC systems and working in a continuous improvement or PPM environment. Qualifications such as a BTEC/ONC in electrical engineering, or a time-served apprenticeship/HNC in electrical, mechanical, or production maintenance engineering. A proactive approach with the ability to quickly respond to and resolve breakdowns. Why This Opportunity? Competitive salary and benefits package. Ongoing career development and training within a forward-thinking company. Work with modern technology in a dynamic and supportive team environment. Be part of a culture focused on continuous improvement and operational excellence. Who Should Apply? This role is ideal for Maintenance Engineers, Technicians, or anyone with relevant experience looking to take on a new challenge in a growing and innovative company. If you're looking for a chance to make a real impact, we'd love to hear from you. How to Apply Excited to take your career further? Submit your CV today, and we'll be in touch to discuss how this opportunity could be the perfect fit for you.
Service Engineer / Service Technician / Compressor Engineer required to join a leading, global compressed air manufacturer. The Successful Service Engineer / Field Service Technician / Compressor Engineer will provide electrical and mechanical repair, service, validation, and testing of compressed air equipment, including compressors, desiccant dryers, compressed air filtration, nitrogen generators, condensate technologies and associated downstream equipment at the workshop near Burton-On-Trent plus customer sites UK wide when required. The Service Engineer / Field Service Technician / Compressor Engineer will ideally have a service background in electrical or mechanical engineering such as compressors, filtration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps, motors, rotating equipment, turbines, refrigeration, hydraulics, pneumatics, robotics or similar electro mechanical engineering equipment. Good working knowledge of three phase electrics and controls is advantageous. Package 32,000 - 42,000 depending on experience Company Van 25 days holiday plus bank holidays Company pension Commission Additional benefits Service Engineer / Service Technician / Compressor Engineer Role To provide electrical and mechanical repair, service and maintenance of compressed air products, systems and solutions. The Compressor Service Engineer will undertake planned and preventative maintenance, commissioning, diagnostics, fault finding of various compressed air downstream and compressor filtration systems. Maintain, repair, install, validation & testing of compressed air equipment, including compressors, desiccant dryers, compressed air filtration, nitrogen generators, condensate technologies and associated downstream equipment. Identifying and providing the customer with compressed air improvements, upgrades, or general aftercare of compressed air filtration products. Workshop based near Burton-On-Trent plus customer sites UK wide when required. Liaise with various engineering departments. Service Engineer / Service Technician / Compressor Engineer Requirements Proven diagnostic skills on complicated electrical and mechanical / electromechanical engineering equipment. Experience as a Field Service Engineer / Service Engineer / Service Technician / Installation Engineer / Compressor Engineer or similar in compressed air or related fields. The ability in maintaining good professional working relationships with existing and new compressed air customers. Service background in electrical or mechanical engineering such as compressors, filtration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps, motors, rotating equipment, turbines, refrigeration, hydraulics, pneumatics, robotics or similar electro mechanical engineering equipment Mechanical or electrical engineering degree, Apprentice trained, HNC, HND, FGas or similar would be advantageous. Commutable to the workshop near Burton-On-Trent plus customer sites UK wide when required.
Jan 29, 2025
Full time
Service Engineer / Service Technician / Compressor Engineer required to join a leading, global compressed air manufacturer. The Successful Service Engineer / Field Service Technician / Compressor Engineer will provide electrical and mechanical repair, service, validation, and testing of compressed air equipment, including compressors, desiccant dryers, compressed air filtration, nitrogen generators, condensate technologies and associated downstream equipment at the workshop near Burton-On-Trent plus customer sites UK wide when required. The Service Engineer / Field Service Technician / Compressor Engineer will ideally have a service background in electrical or mechanical engineering such as compressors, filtration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps, motors, rotating equipment, turbines, refrigeration, hydraulics, pneumatics, robotics or similar electro mechanical engineering equipment. Good working knowledge of three phase electrics and controls is advantageous. Package 32,000 - 42,000 depending on experience Company Van 25 days holiday plus bank holidays Company pension Commission Additional benefits Service Engineer / Service Technician / Compressor Engineer Role To provide electrical and mechanical repair, service and maintenance of compressed air products, systems and solutions. The Compressor Service Engineer will undertake planned and preventative maintenance, commissioning, diagnostics, fault finding of various compressed air downstream and compressor filtration systems. Maintain, repair, install, validation & testing of compressed air equipment, including compressors, desiccant dryers, compressed air filtration, nitrogen generators, condensate technologies and associated downstream equipment. Identifying and providing the customer with compressed air improvements, upgrades, or general aftercare of compressed air filtration products. Workshop based near Burton-On-Trent plus customer sites UK wide when required. Liaise with various engineering departments. Service Engineer / Service Technician / Compressor Engineer Requirements Proven diagnostic skills on complicated electrical and mechanical / electromechanical engineering equipment. Experience as a Field Service Engineer / Service Engineer / Service Technician / Installation Engineer / Compressor Engineer or similar in compressed air or related fields. The ability in maintaining good professional working relationships with existing and new compressed air customers. Service background in electrical or mechanical engineering such as compressors, filtration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps, motors, rotating equipment, turbines, refrigeration, hydraulics, pneumatics, robotics or similar electro mechanical engineering equipment Mechanical or electrical engineering degree, Apprentice trained, HNC, HND, FGas or similar would be advantageous. Commutable to the workshop near Burton-On-Trent plus customer sites UK wide when required.
An excellent opportunity has arisen for a Regional Facilities Manager to join one of the UK's leading FM companies working around the London / Kent region. This Regional Facilities Manager (RFM) will lead the technical teams in the delivery of PPM and Reactive maintenance services. This role will require you to manage your supervisors, technicians, and clients, ensuring good working relationships are maintained and built upon. The RFM must ensure services are delivered in line with legislative and regulatory standards whilst meeting service level agreements. In addition, you will be required to complete a schedule of compliance audits in a timely fashion, taking corrective action as required whilst driving process and supporting the training of all direct reports. Key Accountabilities: Safety To ensure all maintenance services are delivered in line with agreed SLA's, meeting all statutory and legislative requirements. To ensure that all activity compiles with all activities comply with Health and Safety Policies and processes Health & Safety Policies. People To ensure company policies and practises are followed and delivered consistently. To recruit, coach and motivate to ensure people performance is optimised. Provide support, coaching and guidance to all direct reports. Attend / hold meetings (in line with meeting schedule) with your line manager and direct reports to ensure effective cascade of all communications and ways of working. Ensure under performance against KPI's is understood and action plans are in place to drive improvement. Support the Divisional Operations Manager on all technical, people and FM process issues. Provide cover for Divisional Operations Manager during times of absence, holidays and meetings, if requested. Ensure all Supervisor's and Technician's overtime sheets and expenses are completed accurately and approved on time. Excellence Review MI for your area ensuring delivery of key customer KPI's/SLA's. Service Regularly communicate with the customer on all FM activity within agreed SLA's. Audit FM documentation and ensure action plans are in place for any non-compliance issues. Ensure that all sites are covered on a 24/7 basis to deliver both reactive and planned maintenance. Represent the company in a professional manner developing a good working relationship with internal and external colleagues. Ensuring all tools and equipment necessary are available to deliver both reactive and planned maintenance. Complete specified reports and compliance documentation resolving issues as and when they arise. Deal promptly with all Helpdesk calls and ensure that the issues are resolved effectively in line with SLA's, escalating where necessary to the appropriate management level. Ensure that all jobs are logged and closed down, only when completed using the CAFM system. Attend site project meetings where the site is under trial, renewal or remodel when appropriate, ensuring adequate support from other disciplines on specialist issues as required. Integrity To manage all budgets within target and to optimise the best value and where possible the lowest cost, without compromising service. Other To undertake any other reasonable duties and/or responsibilities as may be required. Financial Responsibilities: The AMM is responsible for managing all expenditure and must ensure effective cost control within agreed budgets by site and across their allocated area. Ensuring that all financial approvals are in line with the agreed levels of spend authority. The AMM is also responsible for identifying and delivering business development opportunities within the budget to fund additional services to the customer, whilst supporting the development of capital plans and projects jointly with the customer and designated Manager. People Responsibilities: The RFM is responsible for the direct line management of the Area Site Technicians Supervisors. Recruit and induct colleagues within the team as required and in line with current recruitment guidelines, ensuring all legal compliance is adhered to. Train, develop and appraise direct reports to ensure effective leadership and motivation of own teams. Carry out reviews of any legal training requirements to ensure compliance across the estate. Ensure all direct reports are validated and delivering all aspects of their role. Ensure Technician training is up to date and compliant within defined standards. To manage the team's conduct and capability and apply the disciplinary procedure in accordance with the company D&G Policy as required. Manage any absence within the team fairly and consistently ensuring a RTW interview is conducted after each period of absence. Knowledge, Skills and Abilities: Educated to GCSE / Standard Grade level as a minimum. Recognised technical background with experience in hard FM. Ideally NVQ Level 3/City and guilds 236 Part 1 & 2 or equivalent in electrical installation/Maintenance. Other qualifications of technical within HVAC refrigeration and plumbing qualifications would also be considered. Ideally membership CIBSE, BIFM or equivalent. A working understanding of service and repair requirements for a wide range of electrical and mechanical equipment. A working knowledge of the maintenance service within the FM industry is essential, with previous working knowledge of a multi-client contracted environment being desirable; and PPM and compliance background. Previous experience of effectively leading and managing a team is essential. Previous experience of developing client relationships at a stake holder level would be advantageous. Strong PC literacy, with experience in extracting, collating and presenting performance data along with previous experience of using a CAFM system. Strong communication skills, both written and verbal. Excellent planning, organising, prioritisation and project management skills. Strong results focus, takes accountability for own performance and that of the team. Effective problem-solving and decision-making. Highly flexible and self-starting. Experience in managing financial budgets. Full driving license. Salary / Package For the right candidate a fantastic package consisting of the following will be on offer: Basic Salary - Circa 65,000 Company Car / Car Allowance Overtime Pension Private Health Care Life Assurance 33 days Holiday Regional Facilities Manager - London Regional Facilities Manager - London Regional Facilities Manager Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business.
Jan 31, 2024
Full time
An excellent opportunity has arisen for a Regional Facilities Manager to join one of the UK's leading FM companies working around the London / Kent region. This Regional Facilities Manager (RFM) will lead the technical teams in the delivery of PPM and Reactive maintenance services. This role will require you to manage your supervisors, technicians, and clients, ensuring good working relationships are maintained and built upon. The RFM must ensure services are delivered in line with legislative and regulatory standards whilst meeting service level agreements. In addition, you will be required to complete a schedule of compliance audits in a timely fashion, taking corrective action as required whilst driving process and supporting the training of all direct reports. Key Accountabilities: Safety To ensure all maintenance services are delivered in line with agreed SLA's, meeting all statutory and legislative requirements. To ensure that all activity compiles with all activities comply with Health and Safety Policies and processes Health & Safety Policies. People To ensure company policies and practises are followed and delivered consistently. To recruit, coach and motivate to ensure people performance is optimised. Provide support, coaching and guidance to all direct reports. Attend / hold meetings (in line with meeting schedule) with your line manager and direct reports to ensure effective cascade of all communications and ways of working. Ensure under performance against KPI's is understood and action plans are in place to drive improvement. Support the Divisional Operations Manager on all technical, people and FM process issues. Provide cover for Divisional Operations Manager during times of absence, holidays and meetings, if requested. Ensure all Supervisor's and Technician's overtime sheets and expenses are completed accurately and approved on time. Excellence Review MI for your area ensuring delivery of key customer KPI's/SLA's. Service Regularly communicate with the customer on all FM activity within agreed SLA's. Audit FM documentation and ensure action plans are in place for any non-compliance issues. Ensure that all sites are covered on a 24/7 basis to deliver both reactive and planned maintenance. Represent the company in a professional manner developing a good working relationship with internal and external colleagues. Ensuring all tools and equipment necessary are available to deliver both reactive and planned maintenance. Complete specified reports and compliance documentation resolving issues as and when they arise. Deal promptly with all Helpdesk calls and ensure that the issues are resolved effectively in line with SLA's, escalating where necessary to the appropriate management level. Ensure that all jobs are logged and closed down, only when completed using the CAFM system. Attend site project meetings where the site is under trial, renewal or remodel when appropriate, ensuring adequate support from other disciplines on specialist issues as required. Integrity To manage all budgets within target and to optimise the best value and where possible the lowest cost, without compromising service. Other To undertake any other reasonable duties and/or responsibilities as may be required. Financial Responsibilities: The AMM is responsible for managing all expenditure and must ensure effective cost control within agreed budgets by site and across their allocated area. Ensuring that all financial approvals are in line with the agreed levels of spend authority. The AMM is also responsible for identifying and delivering business development opportunities within the budget to fund additional services to the customer, whilst supporting the development of capital plans and projects jointly with the customer and designated Manager. People Responsibilities: The RFM is responsible for the direct line management of the Area Site Technicians Supervisors. Recruit and induct colleagues within the team as required and in line with current recruitment guidelines, ensuring all legal compliance is adhered to. Train, develop and appraise direct reports to ensure effective leadership and motivation of own teams. Carry out reviews of any legal training requirements to ensure compliance across the estate. Ensure all direct reports are validated and delivering all aspects of their role. Ensure Technician training is up to date and compliant within defined standards. To manage the team's conduct and capability and apply the disciplinary procedure in accordance with the company D&G Policy as required. Manage any absence within the team fairly and consistently ensuring a RTW interview is conducted after each period of absence. Knowledge, Skills and Abilities: Educated to GCSE / Standard Grade level as a minimum. Recognised technical background with experience in hard FM. Ideally NVQ Level 3/City and guilds 236 Part 1 & 2 or equivalent in electrical installation/Maintenance. Other qualifications of technical within HVAC refrigeration and plumbing qualifications would also be considered. Ideally membership CIBSE, BIFM or equivalent. A working understanding of service and repair requirements for a wide range of electrical and mechanical equipment. A working knowledge of the maintenance service within the FM industry is essential, with previous working knowledge of a multi-client contracted environment being desirable; and PPM and compliance background. Previous experience of effectively leading and managing a team is essential. Previous experience of developing client relationships at a stake holder level would be advantageous. Strong PC literacy, with experience in extracting, collating and presenting performance data along with previous experience of using a CAFM system. Strong communication skills, both written and verbal. Excellent planning, organising, prioritisation and project management skills. Strong results focus, takes accountability for own performance and that of the team. Effective problem-solving and decision-making. Highly flexible and self-starting. Experience in managing financial budgets. Full driving license. Salary / Package For the right candidate a fantastic package consisting of the following will be on offer: Basic Salary - Circa 65,000 Company Car / Car Allowance Overtime Pension Private Health Care Life Assurance 33 days Holiday Regional Facilities Manager - London Regional Facilities Manager - London Regional Facilities Manager Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business.
Job Details What you will do Johnson Controls are a leading provider of equipment, controls and services for heating, ventilating, air-conditioning, refrigeration and security systems. The UK&I Service team delivers innovative maintenance and service solutions to a wide customer base across all industry segments for HVAC, chillers, industrial refrigeration, controls and mechanical & electrical works. As an HVAC Technician you are the primary contact for all technical service issues, responsible for trouble shooting and resolving highly complex systems within a set timeframe and according to a defined process, service agreement and customer needs. How you will do it As the direct contact with the client for site technical service and maintenance issues, you will be responsible for trouble shooting, system PPM, as per contract requirements, communicating clearly findings and any further actions required or recommendations for system improvement, upgrades or optimisations. You will keep the customer informed on the service you are providing. Part of the role is preparing detailed reports/technical communications on work carried out and submitting it to Service Co-ordinator & Client as required. Health and Safety will be at the forefront of everything you do. Although often working without accompaniment you will be part of a team and contribute towards its success. What we look for • Ideally hold a recognised HVAC qualification: NVQ level 2 or equivalent (NVQ level 3 not essential but desirable) • Proven experience in the service engineer role within the air conditioning industry. • F-GAS 2079 Cat 1 qualification • A full UK driving license • Experience working with major manufacturers such as Daikin, Hitachi and Mitsubishi Electric. • Experience & working knowledge with DX, Split & VRV systems, AHUs & ventilation plant. • Electrical and controls experience to be able to identify and rectify electrical and control issues. • Understands and analyses relevant technical documents such as electrical schemes, fluid schemes, piping diagrams, psychometric diagrams. • Capable of working without documented procedures and with limited supervision. • A committed can do positive attitude with the ability to integrate and work as a member of a team If you are successful we can offer you a company culture that promotes work life balance, a commitment to continued learning and development, access to mental health support, a fantastic benefits package which includes a competitive salary, pension, life assurance, employee assistance program, employee referral scheme, discount on Johnson Controls security products including ADT Smart Home plus voluntary schemes for childcare vouchers, cycle to work, eye care vouchers and holiday purchase.
Dec 07, 2022
Full time
Job Details What you will do Johnson Controls are a leading provider of equipment, controls and services for heating, ventilating, air-conditioning, refrigeration and security systems. The UK&I Service team delivers innovative maintenance and service solutions to a wide customer base across all industry segments for HVAC, chillers, industrial refrigeration, controls and mechanical & electrical works. As an HVAC Technician you are the primary contact for all technical service issues, responsible for trouble shooting and resolving highly complex systems within a set timeframe and according to a defined process, service agreement and customer needs. How you will do it As the direct contact with the client for site technical service and maintenance issues, you will be responsible for trouble shooting, system PPM, as per contract requirements, communicating clearly findings and any further actions required or recommendations for system improvement, upgrades or optimisations. You will keep the customer informed on the service you are providing. Part of the role is preparing detailed reports/technical communications on work carried out and submitting it to Service Co-ordinator & Client as required. Health and Safety will be at the forefront of everything you do. Although often working without accompaniment you will be part of a team and contribute towards its success. What we look for • Ideally hold a recognised HVAC qualification: NVQ level 2 or equivalent (NVQ level 3 not essential but desirable) • Proven experience in the service engineer role within the air conditioning industry. • F-GAS 2079 Cat 1 qualification • A full UK driving license • Experience working with major manufacturers such as Daikin, Hitachi and Mitsubishi Electric. • Experience & working knowledge with DX, Split & VRV systems, AHUs & ventilation plant. • Electrical and controls experience to be able to identify and rectify electrical and control issues. • Understands and analyses relevant technical documents such as electrical schemes, fluid schemes, piping diagrams, psychometric diagrams. • Capable of working without documented procedures and with limited supervision. • A committed can do positive attitude with the ability to integrate and work as a member of a team If you are successful we can offer you a company culture that promotes work life balance, a commitment to continued learning and development, access to mental health support, a fantastic benefits package which includes a competitive salary, pension, life assurance, employee assistance program, employee referral scheme, discount on Johnson Controls security products including ADT Smart Home plus voluntary schemes for childcare vouchers, cycle to work, eye care vouchers and holiday purchase.
Manufacturing Engineer wanted in Kirckaldy Our client is a large manufacturer based in the Kirkcaldy area is looking for services of a Maintenance Engineering Technician. The role of a Technician within the Engineering department is to support the Production departments in achieving their budgeted production plan throughout the year. Technicians also ensure that some of the statutory requirements associated with a modern production unit are met in in line with the companies Health & Safety & Environmental policies. Specialised in either an electrical or mechanical maintenance environment and have the necessary experience and exposure within the other field. This role involves working a 38 hour week within a three shift pattern over a five day week (Mon - Fri). A multi-skilled team of three technicians per shift provide the engineering support to all production departments. You will be part of a team of 12 Technician grouping within the Engineering Department. Reporting to the Engineering Team Leaders. Key Skills Exhibit a sound Health & Safety work ethic at all times. Use knowledge and experience of sound engineering practices within a modern production environment to offer front line maintenance support to all production departments on a daily basis. Carry out PPM across the site as required. Carry out routine maintenance tasks on Site Services. (Compressed Air Systems. HPHW Systems, Package Boilers, Cooling Towers and Refrigeration Plant). Fault find & rectify mechanical & electrical faults in a modern production environment to include PLC control systems. Make adjustments as required. Install, fault find & rectify AC & DC drives. Be involved in process improvement projects designed to reduce downtime & improve departmental efficiencies. Carry out statutory site inspections in line with the company's legal requirements. Performance Indicators Plant & equipment running time Quality of work (e.g. does the repair last etc) Attendance levels Back-log of work Training Records and matrix Competency matrix Planning and scheduling Budget compliance (on some Capex and CI projects) All the above will be measured through objectives, skills matrix, performance appraisals and one to one's. Qualifications Must have completed an Engineering Apprenticeship \/ Modern Apprenticeship. Minimum qualification to HNC standard in a relevant engineering field. Proven experience within a heavy production environment What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
Dec 07, 2021
Full time
Manufacturing Engineer wanted in Kirckaldy Our client is a large manufacturer based in the Kirkcaldy area is looking for services of a Maintenance Engineering Technician. The role of a Technician within the Engineering department is to support the Production departments in achieving their budgeted production plan throughout the year. Technicians also ensure that some of the statutory requirements associated with a modern production unit are met in in line with the companies Health & Safety & Environmental policies. Specialised in either an electrical or mechanical maintenance environment and have the necessary experience and exposure within the other field. This role involves working a 38 hour week within a three shift pattern over a five day week (Mon - Fri). A multi-skilled team of three technicians per shift provide the engineering support to all production departments. You will be part of a team of 12 Technician grouping within the Engineering Department. Reporting to the Engineering Team Leaders. Key Skills Exhibit a sound Health & Safety work ethic at all times. Use knowledge and experience of sound engineering practices within a modern production environment to offer front line maintenance support to all production departments on a daily basis. Carry out PPM across the site as required. Carry out routine maintenance tasks on Site Services. (Compressed Air Systems. HPHW Systems, Package Boilers, Cooling Towers and Refrigeration Plant). Fault find & rectify mechanical & electrical faults in a modern production environment to include PLC control systems. Make adjustments as required. Install, fault find & rectify AC & DC drives. Be involved in process improvement projects designed to reduce downtime & improve departmental efficiencies. Carry out statutory site inspections in line with the company's legal requirements. Performance Indicators Plant & equipment running time Quality of work (e.g. does the repair last etc) Attendance levels Back-log of work Training Records and matrix Competency matrix Planning and scheduling Budget compliance (on some Capex and CI projects) All the above will be measured through objectives, skills matrix, performance appraisals and one to one's. Qualifications Must have completed an Engineering Apprenticeship \/ Modern Apprenticeship. Minimum qualification to HNC standard in a relevant engineering field. Proven experience within a heavy production environment What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you but you are looking for a new position, please contact us for a confidential discussion on your career. Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk
EMCOR UK are currently offering a Full Time Permanent role for a C&I Technician to join our team at GSK Ware. Job Purpose: Provide calibration and testing service for EMCOR at GSK's Ware site. To ensure that all aspects of the calibration works and records operate effectively from initial request, through specification, to carrying out the work. Responsibilities: • Works as part of a team and is responsible for the installation, maintenance and calibration of instrumentation systems on the site. • Provision of maintenance and repair service for pneumatic and electronic instruments and advice on maintenance routines. • Provision of an installation and commissioning service on new equipment and modify existing equipment. • Advise users on correct operation and use of instruments and process control systems. • Responsible for correct implementation of routine maintenance procedures. • Can suggest modifications of instruments, systems or work methods to the calibration manager. • Identify improvements to systems and processes, working with staff to implement changes. • Develop scopes and detailed specifications to meet identified calibration requirements. • Oversee implementation of calibration activities, taking account of the impact on establishment operation and safety • Willing to work in secure and sensitive environment on an exclusively manned site. • Identify improvements to documentation and data handling systems and processes, working with the calibration manager to implement changes. • Manage the Calibration Document Library on a day-to-day basis, including document retrieval, withdrawal and returns • Maintain an effective filing system and develop reports to effectively measure and keep track of progress monitoring performance and routine activities of all tasked projects and investigations. Ensure KPI and monthly reports are completed. • Input data from calibration documentation in the Maximo CMMS in a timely manner • Implement and maintain cGMP compliant documentation systems for production area. • Maintain and update calibration procedures ensuring all updates are logged. • Manage and produce Change controls for EMCOR calibration team. • Log deviations on non-conformance systems • Ensure that equipment is sent off site for calibration in a timely manner • Audit calibration team to ensure compliance with current standard • Ensure the calibration departments compliance to regulatory commitments of the client Attend regular daily scheduled reporting meetings with the Calibration Manager to identify improvements to systems and processes, working with staff to implement changes. • Identify calibration sub-contractors, and liaise with them with respect to specifications, quotations, method statements, work programmes, and safety • Rigidly follow all Health and Safety rules and good safety practices. • Be able to communicate effectively and have flexible approach to work patterns. • Daily liaison with helpdesk administration to ensure calibration reactive & planned work orders are completed & returned within specified SLA's and KPI's. • In conjunction with the Quality Manager maintain the training matrix to ensure all staff are fully qualified for their respective tasks. • Must be willing to undertake company standard internal training workshops and work to GMP (Good Manufacturing practice), if applicable. • Respond to requests made via the "Help Desk" • Carry out task related "Risk Assessments" and maintain the records • Liaise with the help desk administrators regarding organising any out of hours or weekend working including the control of sub contractors & ensuring both site security & the client are aware of any out of hour's works. Person Specification • Time served apprenticeship or qualification to ONC Level or equivalent in either refrigeration, Electrical or Mechanical discipline • Substantial operational and technical experience with demonstrated potential. • Technical expertise, qualifications or apprenticeship in a craft skill or engineering discipline would be an important pre-requisite of the role. • Ability to liaise and supervise contractors • To be conversant with general Safety, Health and Environmental legislation and in particular the "PUWER regulations" and risk assessments • Proven and extensive experience within a similar role. • Substantial operational and technical experience with demonstrated potential. • Preparation and operation of planned maintenance • Ability to liaise and supervise contractors • Knowledge of key operational procedures e.g. time sheets, planned maintenance systems, Quality and Health & Safety. • Experience of positively dealing with the resolution of customer problems within specific contracts. • Demonstrated 'hands-on' technical expertise in a number of key operational areas. • Demonstrable skills in dealing and working closely with internal and external customers and suppliers on complex and interrelated issues on an ongoing basis • Experience in pharmaceutical, healthcare or processing industry and working within a GMP environment would be an advantage. • Be able to communicate effectively and have flexible approach to work patterns. • Knowledge of Word & Excel spreadsheets and their implementation with overall good IT skills • High level of interpersonal, presentation and customer relationship skills. • Must be able to demonstrate leadership qualities with good Influencing skills • Ability to sustain effective relationships • Ability to plan and organise with drive and determination Benefits • 25 days annual leave • Pension schemes • Cycle scheme • Company sick pay • Flexible Working policy where applicable and feasible • Employee benefit discounts including childcare vouchers • Personal Development opportunities: our appraisal process is designed to identify your training needs and the personal development goals needed to progress your career. • Staff canteen (subsidised) at Stevenage, Ware and Weybridge (Not sure about the other sites). • Discount on GSK Products in Onsite shop (Aqua fresh, Sensodyne, Voltarol,... ) • In Learning with (url removed) content (Linked in Learning), Career Innovation, Leading Edge - online platforms for professional development and growth • Creating Balance; our steering group promotes Diversity and Inclusion throughout our business. • Mental Health and Wellbeing; Mind is our EMCOR UK charity, and as such mental health and wellbeing is an important topic for us. To support this we have an Employee assistance programme available to you with free advice on dealing with personal problems such as; debt, legal issues, relationships, addictions and stress. • Charitable Giving and Community; we offer two days off per annum for you to support your chosen charity. • Recognising Excellence; our annual Employee Excellence Awards are designed to recognise and reward individuals or teams for their outstanding contribution and performance at work
Dec 05, 2021
Full time
EMCOR UK are currently offering a Full Time Permanent role for a C&I Technician to join our team at GSK Ware. Job Purpose: Provide calibration and testing service for EMCOR at GSK's Ware site. To ensure that all aspects of the calibration works and records operate effectively from initial request, through specification, to carrying out the work. Responsibilities: • Works as part of a team and is responsible for the installation, maintenance and calibration of instrumentation systems on the site. • Provision of maintenance and repair service for pneumatic and electronic instruments and advice on maintenance routines. • Provision of an installation and commissioning service on new equipment and modify existing equipment. • Advise users on correct operation and use of instruments and process control systems. • Responsible for correct implementation of routine maintenance procedures. • Can suggest modifications of instruments, systems or work methods to the calibration manager. • Identify improvements to systems and processes, working with staff to implement changes. • Develop scopes and detailed specifications to meet identified calibration requirements. • Oversee implementation of calibration activities, taking account of the impact on establishment operation and safety • Willing to work in secure and sensitive environment on an exclusively manned site. • Identify improvements to documentation and data handling systems and processes, working with the calibration manager to implement changes. • Manage the Calibration Document Library on a day-to-day basis, including document retrieval, withdrawal and returns • Maintain an effective filing system and develop reports to effectively measure and keep track of progress monitoring performance and routine activities of all tasked projects and investigations. Ensure KPI and monthly reports are completed. • Input data from calibration documentation in the Maximo CMMS in a timely manner • Implement and maintain cGMP compliant documentation systems for production area. • Maintain and update calibration procedures ensuring all updates are logged. • Manage and produce Change controls for EMCOR calibration team. • Log deviations on non-conformance systems • Ensure that equipment is sent off site for calibration in a timely manner • Audit calibration team to ensure compliance with current standard • Ensure the calibration departments compliance to regulatory commitments of the client Attend regular daily scheduled reporting meetings with the Calibration Manager to identify improvements to systems and processes, working with staff to implement changes. • Identify calibration sub-contractors, and liaise with them with respect to specifications, quotations, method statements, work programmes, and safety • Rigidly follow all Health and Safety rules and good safety practices. • Be able to communicate effectively and have flexible approach to work patterns. • Daily liaison with helpdesk administration to ensure calibration reactive & planned work orders are completed & returned within specified SLA's and KPI's. • In conjunction with the Quality Manager maintain the training matrix to ensure all staff are fully qualified for their respective tasks. • Must be willing to undertake company standard internal training workshops and work to GMP (Good Manufacturing practice), if applicable. • Respond to requests made via the "Help Desk" • Carry out task related "Risk Assessments" and maintain the records • Liaise with the help desk administrators regarding organising any out of hours or weekend working including the control of sub contractors & ensuring both site security & the client are aware of any out of hour's works. Person Specification • Time served apprenticeship or qualification to ONC Level or equivalent in either refrigeration, Electrical or Mechanical discipline • Substantial operational and technical experience with demonstrated potential. • Technical expertise, qualifications or apprenticeship in a craft skill or engineering discipline would be an important pre-requisite of the role. • Ability to liaise and supervise contractors • To be conversant with general Safety, Health and Environmental legislation and in particular the "PUWER regulations" and risk assessments • Proven and extensive experience within a similar role. • Substantial operational and technical experience with demonstrated potential. • Preparation and operation of planned maintenance • Ability to liaise and supervise contractors • Knowledge of key operational procedures e.g. time sheets, planned maintenance systems, Quality and Health & Safety. • Experience of positively dealing with the resolution of customer problems within specific contracts. • Demonstrated 'hands-on' technical expertise in a number of key operational areas. • Demonstrable skills in dealing and working closely with internal and external customers and suppliers on complex and interrelated issues on an ongoing basis • Experience in pharmaceutical, healthcare or processing industry and working within a GMP environment would be an advantage. • Be able to communicate effectively and have flexible approach to work patterns. • Knowledge of Word & Excel spreadsheets and their implementation with overall good IT skills • High level of interpersonal, presentation and customer relationship skills. • Must be able to demonstrate leadership qualities with good Influencing skills • Ability to sustain effective relationships • Ability to plan and organise with drive and determination Benefits • 25 days annual leave • Pension schemes • Cycle scheme • Company sick pay • Flexible Working policy where applicable and feasible • Employee benefit discounts including childcare vouchers • Personal Development opportunities: our appraisal process is designed to identify your training needs and the personal development goals needed to progress your career. • Staff canteen (subsidised) at Stevenage, Ware and Weybridge (Not sure about the other sites). • Discount on GSK Products in Onsite shop (Aqua fresh, Sensodyne, Voltarol,... ) • In Learning with (url removed) content (Linked in Learning), Career Innovation, Leading Edge - online platforms for professional development and growth • Creating Balance; our steering group promotes Diversity and Inclusion throughout our business. • Mental Health and Wellbeing; Mind is our EMCOR UK charity, and as such mental health and wellbeing is an important topic for us. To support this we have an Employee assistance programme available to you with free advice on dealing with personal problems such as; debt, legal issues, relationships, addictions and stress. • Charitable Giving and Community; we offer two days off per annum for you to support your chosen charity. • Recognising Excellence; our annual Employee Excellence Awards are designed to recognise and reward individuals or teams for their outstanding contribution and performance at work
