Company: Saipem Project: Liverpool Bay DECOM & CSS Projects Job Title: Decommissioning QC Inspector Location: Liverpool UK Duration: Oct 2025 - April 2026 About us: Saipem is a global leader in engineering services for the design, construction and operation of complex infrastructures and plants in the energy sector, both offshore and onshore. With our five business lines - Asset Based Services, Energy Carriers, Offshore Wind, Sustainable Infrastructures, Robotics & Industrialized Solutions - we are One Company present in around 60 countries with over 30,000 employees of more than 130 nationalities, providing the world the innovative excellence of our people and our partners for over 65 years. Mission: Execute the inspection and Quality Control activities on site, collecting the relevant records. Ensure that all civil construction and erection works are executed in accordance with the relevant Codes and standards, and Subsidiaries procedures, Quality Control Plans/ Inspection Test Plans Tasks In accordance with the Quality Control Plan, execute the specific inspections on material, equipment, steel structures and construction/installation activities and HVAC on site, following relevant specified procedures, issuing the relevant Quality Records Issue the relevant Quality Records and, when necessary, write and send to Quality Control Supervisor non-conformances reports Check the preparation of foundations Check the correct preparation of reinforcements Check the certifications regarding element mixes, LASTM test, chemical analysis, grain size analysis Monitor atmospheric conditions during pouring operations Monitor correct curing operations Check the sampling operations (when required) Review the laboratory examination results Check the conformity with the Quality Control Plan and obtain the relevant documentation Orderly collect and manage/check documents certifying test, controls and inspection documents, ensuring that all civil works and testing related records are properly retrievable within the final As- Built dossier In Case of subcontractor activities, ensure the correct implementation of the approved Quality Control Plans/ Inspection How to Apply: If you are ready to take on this challenging role and contribute to the success of Saipem's projects, please submit your CV in English by clicking on the link below.
Jul 16, 2025
Full time
Company: Saipem Project: Liverpool Bay DECOM & CSS Projects Job Title: Decommissioning QC Inspector Location: Liverpool UK Duration: Oct 2025 - April 2026 About us: Saipem is a global leader in engineering services for the design, construction and operation of complex infrastructures and plants in the energy sector, both offshore and onshore. With our five business lines - Asset Based Services, Energy Carriers, Offshore Wind, Sustainable Infrastructures, Robotics & Industrialized Solutions - we are One Company present in around 60 countries with over 30,000 employees of more than 130 nationalities, providing the world the innovative excellence of our people and our partners for over 65 years. Mission: Execute the inspection and Quality Control activities on site, collecting the relevant records. Ensure that all civil construction and erection works are executed in accordance with the relevant Codes and standards, and Subsidiaries procedures, Quality Control Plans/ Inspection Test Plans Tasks In accordance with the Quality Control Plan, execute the specific inspections on material, equipment, steel structures and construction/installation activities and HVAC on site, following relevant specified procedures, issuing the relevant Quality Records Issue the relevant Quality Records and, when necessary, write and send to Quality Control Supervisor non-conformances reports Check the preparation of foundations Check the correct preparation of reinforcements Check the certifications regarding element mixes, LASTM test, chemical analysis, grain size analysis Monitor atmospheric conditions during pouring operations Monitor correct curing operations Check the sampling operations (when required) Review the laboratory examination results Check the conformity with the Quality Control Plan and obtain the relevant documentation Orderly collect and manage/check documents certifying test, controls and inspection documents, ensuring that all civil works and testing related records are properly retrievable within the final As- Built dossier In Case of subcontractor activities, ensure the correct implementation of the approved Quality Control Plans/ Inspection How to Apply: If you are ready to take on this challenging role and contribute to the success of Saipem's projects, please submit your CV in English by clicking on the link below.
Our Client, Urenco; trusted, long-term supplier to the nuclear industry, specialising in safe, cost effective and reliable uranium enrichment services, are looking for a Project Quality Manager on a contract basis (inside IR35), to be based in Capenhurst near Chester. In this contract position, you will play an important role in ensuring the highest standards of quality in our projects. You will coordinate and guide a team of quality professionals, overseeing their day-to-day activities and driving continuous improvement initiatives. Rate: £65-75 Umbrella (Inside IR35) The Project Quality Manager shall: Report to the Team Lead Project Quality Manager, providing updates on team performance and project status Coordination of Quality Engineers and Quality Control Inspectors, providing guidance, support, and mentorship Supporting assigned projects at Urenco on all quality matters Ensuring all project quality documents are rightfully in place for the assigned project(s) Promote a collaborative and positive team environment, encouraging innovation and problem-solving Lead Quality Assurance and Control on a specific project Ensure the effective performance of all project quality activities against the compliance requirements of project specifications and standards Work closely with cross-functional teams Promote project quality and safety awareness and developing a Right First Time culture throughout the project Take part in License Condition compliance audits, when applicable Undertake corrective actions when required to maintain or improve compliance and best practice Review requirements, specifications and technical design documents to provide timely and meaningful feedback to internal departments Review and advice on supplier and contractor documents as required Ensure compliance with nuclear industry regulations, standards, and best practices, coach departments where needed in the proper use Implement quality metrics and performance indicators to measure project progress and success Vocational Qualifications Technical Background (areas: Electrical, mechanical, systems or instrumental) Bachelor's degree in a relevant technical field preferred (e.g. Technical Process Management, Quality Management) Experienced in leading Quality programmes in projects Demonstrated knowledge of ISO, ASTM, DIN, BSI and other international standards Internal Auditor / Lead Auditor certification preferred, with IRCA/CQI Microsoft Office skills Traveling can be expected Experience required Experienced Project Quality Manager (five+ years experience within running projects, preferred in the Nuclear Industry) Experienced in leading quality in major projects preferred in nuclear industry, such as new build, decommissioning Experienced in coordinating a team of Quality Engineers & QC Inspectors Experienced in developing and working with Quality and Inspection Plans Experienced with certification processes Self-motivated and driven to manage and complete assignments Fluent in the English language Still curious? At Urenco, everyone is welcome. We strive to create an inclusive and diverse environment where we all have a voice, and you can feel confident being yourself. ?We re committed to equality, diversity and inclusion. ?We d like our future workforce to have an equal gender balance, represent a broad mix of people from minority ethnic backgrounds, LGBTQ+, those with a disability and supporting social mobility. Join us on our journey, front and centre, to a net zero future.
Jan 29, 2025
Contractor
Our Client, Urenco; trusted, long-term supplier to the nuclear industry, specialising in safe, cost effective and reliable uranium enrichment services, are looking for a Project Quality Manager on a contract basis (inside IR35), to be based in Capenhurst near Chester. In this contract position, you will play an important role in ensuring the highest standards of quality in our projects. You will coordinate and guide a team of quality professionals, overseeing their day-to-day activities and driving continuous improvement initiatives. Rate: £65-75 Umbrella (Inside IR35) The Project Quality Manager shall: Report to the Team Lead Project Quality Manager, providing updates on team performance and project status Coordination of Quality Engineers and Quality Control Inspectors, providing guidance, support, and mentorship Supporting assigned projects at Urenco on all quality matters Ensuring all project quality documents are rightfully in place for the assigned project(s) Promote a collaborative and positive team environment, encouraging innovation and problem-solving Lead Quality Assurance and Control on a specific project Ensure the effective performance of all project quality activities against the compliance requirements of project specifications and standards Work closely with cross-functional teams Promote project quality and safety awareness and developing a Right First Time culture throughout the project Take part in License Condition compliance audits, when applicable Undertake corrective actions when required to maintain or improve compliance and best practice Review requirements, specifications and technical design documents to provide timely and meaningful feedback to internal departments Review and advice on supplier and contractor documents as required Ensure compliance with nuclear industry regulations, standards, and best practices, coach departments where needed in the proper use Implement quality metrics and performance indicators to measure project progress and success Vocational Qualifications Technical Background (areas: Electrical, mechanical, systems or instrumental) Bachelor's degree in a relevant technical field preferred (e.g. Technical Process Management, Quality Management) Experienced in leading Quality programmes in projects Demonstrated knowledge of ISO, ASTM, DIN, BSI and other international standards Internal Auditor / Lead Auditor certification preferred, with IRCA/CQI Microsoft Office skills Traveling can be expected Experience required Experienced Project Quality Manager (five+ years experience within running projects, preferred in the Nuclear Industry) Experienced in leading quality in major projects preferred in nuclear industry, such as new build, decommissioning Experienced in coordinating a team of Quality Engineers & QC Inspectors Experienced in developing and working with Quality and Inspection Plans Experienced with certification processes Self-motivated and driven to manage and complete assignments Fluent in the English language Still curious? At Urenco, everyone is welcome. We strive to create an inclusive and diverse environment where we all have a voice, and you can feel confident being yourself. ?We re committed to equality, diversity and inclusion. ?We d like our future workforce to have an equal gender balance, represent a broad mix of people from minority ethnic backgrounds, LGBTQ+, those with a disability and supporting social mobility. Join us on our journey, front and centre, to a net zero future.
Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Purpose To act as the main focal point offshore and responsible for the co-ordination of all inspection activities. To ensure that plant and equipment is certified in accordance with Oceaneering and Client codes of practice, strategies and legislation with feedback of results to the client. Functions Essential Duties and Responsibilities include the following. Other duties may be assigned. Support the Line Manager (LM) and/ or Senior Inspection Engineer (SIE) in delivery of Oceaneering work scope as defined in the contract with the client. Functionally report to the Offshore Installation Manager for the provision and co-ordination of all Inspection Services. Maintain close liaison with the platform personnel to ensure activities such as equipment scheduling, planning, availability etc. are implemented. Assist in all strategy reviews and in the development of inspection programmes. Where necessary input to detailed plans, programmes, work scopes and carry out pre-surveys of equipment. Undertake all agreed offshore inspections within the limitations of the Oceaneering issued Letter of Authority (LOA), ensuring they are implemented and completed as scheduled. Supervise Oceaneering personnel and third parties whilst offshore. Ensure the contractor understands the work scope, associated risks and the work is completed and reported as specified in the work scope. Carry out briefings/Tool Box Talks to all Inspection/ NDT Personnel. Issue inspection reports (include interim ones as required) within the time period as stated in the procedure. Use approved forms/ templates for items inspected ensuring condition, suitability for further service and observations are included plus supporting information such as NDT reports. Update inspection database (e.g. ACET) and maintenance management systems (e.g. Maximo, SAP) with inspection activities. Review and where applicable sign acceptance of inspection reports completed by NDT technicians or Third parties. Assess defects or anomalies found, ensuring use of the Oceaneering or client anomaly process e.g. IQRO procedure Provide remedial recommendations as required and inspect the subsequent repair work for acceptance. Attend meetings and reviews as appropriate e.g. Shutdown, IQRO, planning, safety and hazard risk assessment etc. Maintain assigned Logs or Registers up-to-date and in accordance with Oceaneering/client procedures. Issue status reports as required e.g. daily/ weekly/ handover, etc. Provide support as required to audits e.g. verification, client, internal, etc. General The list of job duties is not exclusive or exhaustive and the post holder will be required to undertake tasks that may reasonably be expected within the scope of the post Assist with any other duties as and when required Undertake specific projects as instructed by management Safety Ensure that the Safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment Promote a strong HSE culture at all times Ensure that personnel identify with and achieve, the necessary Health and Safety performance standards associated with the relative risks to personnel and plant in their environment and daily work Ensure that business and HSE risk implications of integrity issues are clearly identified and assessed for consideration within the Oceaneering Integrity Management Team and communicated to the Client Other Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems. Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company. Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Training Cat 3: ONC in Mechanical Eng or NVQ Level 3 (such as in City & Guilds) (E). Note: ONC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification. Alternatively, EngTech as defined by the Eng Council (or equivalent), through a suitable Engineering Institute (refer to RG2/ RG0 Category 3 decision workflow) NDT certification (P) (in core techniques), if it is a specific client requirement Offshore medical, annual eye test, BOSIET & MIST certification (E) Confined Space Entry training (E Cat 2: Minimum HNC or NVQ Level 4 (such as in City & Guilds) in a suitable engineering or Physics subject (E) (Mechanical Engineering (P . Note: HNC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification. Alternatively, IEng as defined by the Eng Council (or equivalent) through a suitable Engineering Institute (refer to RG2/ RG0 Category 2 decision workflow). Overseas qualifications will have to be demonstrated as equivalent. ASME or CSWIP Plant Inspector Level 1 & 2 (P). For Overseas contracts: API 570 & 510 may be a specific client requirement. NDT certification (P) (in core techniques), if it is a specific client requirement Offshore medical, annual eye test, BOSIET & MIST certification (E) Confined Space Entry training (E) Experience Essential: Significant experience in the field of plant and equipment inspection TECHNICAL Required "Hands on" visual inspection experience of different plant & equipment. This should primarily be "in service" Experience which covers planning, MMSs, Inspection storage databases/systems (such as ACET), inspection workpacks/scopes and dealing with anomalies. Knowledge of legislation, codes/standards, materials, plant operations & processes, damage mechanisms, coatings and NDT techniques (both conventional & specialist). Must be familiar with QA/QC systems/procedures and NDT techniques Microsoft Office Desired Construction & fabrication inspection experience. Knowledge of RBA and WSEs (or equivalent) Must be able to demonstrate working knowledge of design, manufacture, metallurgy, welding, codes, standards, risk assessments and legislation associated with the in-service inspection of plant and equipment ACET or equivalent Closing Statement We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.
Feb 01, 2024
Full time
Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Purpose To act as the main focal point offshore and responsible for the co-ordination of all inspection activities. To ensure that plant and equipment is certified in accordance with Oceaneering and Client codes of practice, strategies and legislation with feedback of results to the client. Functions Essential Duties and Responsibilities include the following. Other duties may be assigned. Support the Line Manager (LM) and/ or Senior Inspection Engineer (SIE) in delivery of Oceaneering work scope as defined in the contract with the client. Functionally report to the Offshore Installation Manager for the provision and co-ordination of all Inspection Services. Maintain close liaison with the platform personnel to ensure activities such as equipment scheduling, planning, availability etc. are implemented. Assist in all strategy reviews and in the development of inspection programmes. Where necessary input to detailed plans, programmes, work scopes and carry out pre-surveys of equipment. Undertake all agreed offshore inspections within the limitations of the Oceaneering issued Letter of Authority (LOA), ensuring they are implemented and completed as scheduled. Supervise Oceaneering personnel and third parties whilst offshore. Ensure the contractor understands the work scope, associated risks and the work is completed and reported as specified in the work scope. Carry out briefings/Tool Box Talks to all Inspection/ NDT Personnel. Issue inspection reports (include interim ones as required) within the time period as stated in the procedure. Use approved forms/ templates for items inspected ensuring condition, suitability for further service and observations are included plus supporting information such as NDT reports. Update inspection database (e.g. ACET) and maintenance management systems (e.g. Maximo, SAP) with inspection activities. Review and where applicable sign acceptance of inspection reports completed by NDT technicians or Third parties. Assess defects or anomalies found, ensuring use of the Oceaneering or client anomaly process e.g. IQRO procedure Provide remedial recommendations as required and inspect the subsequent repair work for acceptance. Attend meetings and reviews as appropriate e.g. Shutdown, IQRO, planning, safety and hazard risk assessment etc. Maintain assigned Logs or Registers up-to-date and in accordance with Oceaneering/client procedures. Issue status reports as required e.g. daily/ weekly/ handover, etc. Provide support as required to audits e.g. verification, client, internal, etc. General The list of job duties is not exclusive or exhaustive and the post holder will be required to undertake tasks that may reasonably be expected within the scope of the post Assist with any other duties as and when required Undertake specific projects as instructed by management Safety Ensure that the Safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment Promote a strong HSE culture at all times Ensure that personnel identify with and achieve, the necessary Health and Safety performance standards associated with the relative risks to personnel and plant in their environment and daily work Ensure that business and HSE risk implications of integrity issues are clearly identified and assessed for consideration within the Oceaneering Integrity Management Team and communicated to the Client Other Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems. Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company. Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications and Training Cat 3: ONC in Mechanical Eng or NVQ Level 3 (such as in City & Guilds) (E). Note: ONC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification. Alternatively, EngTech as defined by the Eng Council (or equivalent), through a suitable Engineering Institute (refer to RG2/ RG0 Category 3 decision workflow) NDT certification (P) (in core techniques), if it is a specific client requirement Offshore medical, annual eye test, BOSIET & MIST certification (E) Confined Space Entry training (E Cat 2: Minimum HNC or NVQ Level 4 (such as in City & Guilds) in a suitable engineering or Physics subject (E) (Mechanical Engineering (P . Note: HNC in Fabrication & welding or other similar subject could be considered provided the individual has other qualification. Alternatively, IEng as defined by the Eng Council (or equivalent) through a suitable Engineering Institute (refer to RG2/ RG0 Category 2 decision workflow). Overseas qualifications will have to be demonstrated as equivalent. ASME or CSWIP Plant Inspector Level 1 & 2 (P). For Overseas contracts: API 570 & 510 may be a specific client requirement. NDT certification (P) (in core techniques), if it is a specific client requirement Offshore medical, annual eye test, BOSIET & MIST certification (E) Confined Space Entry training (E) Experience Essential: Significant experience in the field of plant and equipment inspection TECHNICAL Required "Hands on" visual inspection experience of different plant & equipment. This should primarily be "in service" Experience which covers planning, MMSs, Inspection storage databases/systems (such as ACET), inspection workpacks/scopes and dealing with anomalies. Knowledge of legislation, codes/standards, materials, plant operations & processes, damage mechanisms, coatings and NDT techniques (both conventional & specialist). Must be familiar with QA/QC systems/procedures and NDT techniques Microsoft Office Desired Construction & fabrication inspection experience. Knowledge of RBA and WSEs (or equivalent) Must be able to demonstrate working knowledge of design, manufacture, metallurgy, welding, codes, standards, risk assessments and legislation associated with the in-service inspection of plant and equipment ACET or equivalent Closing Statement We offer a competitive salary, a comprehensive benefits package and the opportunity to advance in an international company. To apply, click 'Apply Now'.
Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Purpose Execute inspections as required by Offshore Inspection Engineers (OIE) and Senior Inspection Engineer (SIE) and report back in the required approved format in a timely manor. Supervise and coordinate ad-hoc NDT inspectors, 3rd party companies and/or NDT inspection teams on platform to ensure that they execute all ultrasonic testing, eddy current inspection, magnetic particle inspection, dye penetrant inspections and radiographic inspections on items of static equipment and associated piping in accordance with company, IRATA, client standards and regulatory requirements and ensure reports are in the correct format and submitted in a timely manner. At times may be required to act as additional persons within the NDT inspection team to complete inspections in line with qualifications. Functions ESSENTIAL Carry out the most effective NDT techniques to components requiring inspection Utilise rope access capabilities when required working at height for long periods of time Perform rope access inspection safely in harsh environments ensuring that regular breaks are taken Ensure that the correct rope access equipment is utilised and that harness is worn at all times Ensure that work area is safe to carry out rope access activities Ensure permits are in place for technicians and work-scope is readily available for inspection Evaluate results of the test in accordance with applicable specification Ensure inspection is carried out within the parameters of the applicable specification Produce clear and concise reports detailing the methods used and results of the inspection with isometrics or sketches showing the areas inspected and the results obtained. Report all findings noting any limitations / test restrictions is applicable Cross check all NDT reports to ensure the quality / results / scope of the report is correct, ensuring the correct procedure & technique is referenced, the equipment / consumables reported are correct and in calibration and the report is the correct revision. Once checked countersign as supervisor. Send signed sample reports to the office for audit purposes to cross check quality Report any near hit's, incidents-accidents and first aid actions as per Oceaneering procedure utilizing the correct report format Ensure client specific observation / safety cards are being completed daily by all technicians Perform regular safety and pre job toolbox talks to technicians Carry out risk assessments/Take2 as required Supervise any radiography teams on the platform and ensure they are completing the radiography pre-post checklist sheets each day they perform radiography Perform routine technician feedback to management on their attitude, punctuality, safety performance and competence Ensure technicians annually perform technical monitoring audits as per qualified NDT discipline Ensure function tests are performed according to the procedure on all NDT and radiography equipment and any faulty equipment is detailed back to the supervisor Ensure UT technicians perform probe checks each day they perform UT inspection on site Maintain and control NDT equipment and consumables ensuring equipment/consumable registers are accurately updated and sent through to NDT Project Management Ensure and track all company inspection equipment on platform is calibrated and well maintained and report accordingly Ensure all consumables are in date and consumable certificate of conformance are present. Prior to packing any returned equipment check labelling is accurate, container is locked, and all equipment has been verified Support OIE in producing IQ's Maintain company's inspection files Carry out work in a timely and efficient manner in order to meet deadlines, changing priorities when the situation requires Carry out work in accordance with Oceaneering operating procedures and statutory/client specifications and requirements NON-ESSENTIAL Undertake any other duties of a reasonable nature as required by Management Safety Ensure that the safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment Other Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems. Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment Supervisory Responsibilities No direct supervisory responsibilities, however, supervises offshore NDT teams, whilst supporting the O.I.E. Responsibilities include planning, assigning, and directing work; rewarding and disciplining employees; addressing complaints, performing routine safety talks and resolving problems If an appointed RPS, it is their responsibility for the safety of their team, and all that are working around the vicinity of the barrier. It is their duty to ensure barriers are erected correctly at a safe distance. Reporting Relationship This person will report to the Project Manager Performance will be measured by the Project Manager and dotted line manager - Manager, Operations, IMDS Aberdeen Qualifications Qualifications To perform the job successfully, an individual should demonstrate the following competencies: REQUIRED Valid Passport Valid Full UK Driving Licence ASNT/PCN Level 2 or CSWIP Visual Inspection ASNT/PCN Level 2 Ultrasonic Testing ASNT/PCN Level 2 in MPI and / or DPI. IRATA Level 1 (minimum). Offshore Survival / Offshore Medical / M.I.S.T / Cat A E.B.S / Bi-Deltoid Measurement / Eye Test Flexible approach, team player and good communication skills IT literate - Word & Excel (minimum) DESIRED GCSE pass in English, Maths and Science Excellent organisation and interpersonal skills ASNT/PCN Radiological Protection Supervision (RPS) Knowledge, Skills, Abilities, and Other Characteristics In order to perform this job successfully an individual must be able to perform each essential duty satisfactorily. the requirements listed below are representative of the knowledge, skill and /or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Education and/or Experience Preferred associate degree or equivalent from two-year college or technical school; Minimum of 5 year experience and or training; or equivalent combination of education and experience in structural and mechanical drafting/design or related field. Must also be familiar with QA/QC systems. Minimum 1-year experience in the relevant inspection techniques within the oil and gas industry. Language Ability to read, analyzes, and interprets general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardisation exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills To perform this job successfully, an individual should have complete knowledge of Microsoft Word, Excel and PeopleSoft. Working Conditions This position is considered OFFSHORE which is characterised as follows. Outdoors and indoors, day and night, as well as over/near water. Requires working on or near moving equipment and vibrating equipment. Frequently the humidity is above 90%, noise is over 85 decibels and the light is intense/glare. Includes exposure to contaminants Requires working in cramped workspaces and getting into awkward positions Requires working in extremely bright or inadequate lighting conditions Potential exposure to airborne dust, fumes, and gases. Work surface is stable, height is elevated. Physical Activity/Requirements . click apply for full job details
Dec 18, 2022
Full time
Company Profile Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Duties & Responsibilities Purpose Execute inspections as required by Offshore Inspection Engineers (OIE) and Senior Inspection Engineer (SIE) and report back in the required approved format in a timely manor. Supervise and coordinate ad-hoc NDT inspectors, 3rd party companies and/or NDT inspection teams on platform to ensure that they execute all ultrasonic testing, eddy current inspection, magnetic particle inspection, dye penetrant inspections and radiographic inspections on items of static equipment and associated piping in accordance with company, IRATA, client standards and regulatory requirements and ensure reports are in the correct format and submitted in a timely manner. At times may be required to act as additional persons within the NDT inspection team to complete inspections in line with qualifications. Functions ESSENTIAL Carry out the most effective NDT techniques to components requiring inspection Utilise rope access capabilities when required working at height for long periods of time Perform rope access inspection safely in harsh environments ensuring that regular breaks are taken Ensure that the correct rope access equipment is utilised and that harness is worn at all times Ensure that work area is safe to carry out rope access activities Ensure permits are in place for technicians and work-scope is readily available for inspection Evaluate results of the test in accordance with applicable specification Ensure inspection is carried out within the parameters of the applicable specification Produce clear and concise reports detailing the methods used and results of the inspection with isometrics or sketches showing the areas inspected and the results obtained. Report all findings noting any limitations / test restrictions is applicable Cross check all NDT reports to ensure the quality / results / scope of the report is correct, ensuring the correct procedure & technique is referenced, the equipment / consumables reported are correct and in calibration and the report is the correct revision. Once checked countersign as supervisor. Send signed sample reports to the office for audit purposes to cross check quality Report any near hit's, incidents-accidents and first aid actions as per Oceaneering procedure utilizing the correct report format Ensure client specific observation / safety cards are being completed daily by all technicians Perform regular safety and pre job toolbox talks to technicians Carry out risk assessments/Take2 as required Supervise any radiography teams on the platform and ensure they are completing the radiography pre-post checklist sheets each day they perform radiography Perform routine technician feedback to management on their attitude, punctuality, safety performance and competence Ensure technicians annually perform technical monitoring audits as per qualified NDT discipline Ensure function tests are performed according to the procedure on all NDT and radiography equipment and any faulty equipment is detailed back to the supervisor Ensure UT technicians perform probe checks each day they perform UT inspection on site Maintain and control NDT equipment and consumables ensuring equipment/consumable registers are accurately updated and sent through to NDT Project Management Ensure and track all company inspection equipment on platform is calibrated and well maintained and report accordingly Ensure all consumables are in date and consumable certificate of conformance are present. Prior to packing any returned equipment check labelling is accurate, container is locked, and all equipment has been verified Support OIE in producing IQ's Maintain company's inspection files Carry out work in a timely and efficient manner in order to meet deadlines, changing priorities when the situation requires Carry out work in accordance with Oceaneering operating procedures and statutory/client specifications and requirements NON-ESSENTIAL Undertake any other duties of a reasonable nature as required by Management Safety Ensure that the safety policies and procedures are understood and adhered to so far as is reasonably practicable in order to ensure a safe working environment Other Carry out work in accordance with the Company Health, Safety, Environmental and Quality Systems. Perform the assigned tasks with due diligence regarding the Integrated Management Systems on the Company Eliminate waste of whatever form, to suggest the use of more environmentally friendly substances and practices and contribute to the continuous improvement of the environment Supervisory Responsibilities No direct supervisory responsibilities, however, supervises offshore NDT teams, whilst supporting the O.I.E. Responsibilities include planning, assigning, and directing work; rewarding and disciplining employees; addressing complaints, performing routine safety talks and resolving problems If an appointed RPS, it is their responsibility for the safety of their team, and all that are working around the vicinity of the barrier. It is their duty to ensure barriers are erected correctly at a safe distance. Reporting Relationship This person will report to the Project Manager Performance will be measured by the Project Manager and dotted line manager - Manager, Operations, IMDS Aberdeen Qualifications Qualifications To perform the job successfully, an individual should demonstrate the following competencies: REQUIRED Valid Passport Valid Full UK Driving Licence ASNT/PCN Level 2 or CSWIP Visual Inspection ASNT/PCN Level 2 Ultrasonic Testing ASNT/PCN Level 2 in MPI and / or DPI. IRATA Level 1 (minimum). Offshore Survival / Offshore Medical / M.I.S.T / Cat A E.B.S / Bi-Deltoid Measurement / Eye Test Flexible approach, team player and good communication skills IT literate - Word & Excel (minimum) DESIRED GCSE pass in English, Maths and Science Excellent organisation and interpersonal skills ASNT/PCN Radiological Protection Supervision (RPS) Knowledge, Skills, Abilities, and Other Characteristics In order to perform this job successfully an individual must be able to perform each essential duty satisfactorily. the requirements listed below are representative of the knowledge, skill and /or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Education and/or Experience Preferred associate degree or equivalent from two-year college or technical school; Minimum of 5 year experience and or training; or equivalent combination of education and experience in structural and mechanical drafting/design or related field. Must also be familiar with QA/QC systems. Minimum 1-year experience in the relevant inspection techniques within the oil and gas industry. Language Ability to read, analyzes, and interprets general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardisation exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills To perform this job successfully, an individual should have complete knowledge of Microsoft Word, Excel and PeopleSoft. Working Conditions This position is considered OFFSHORE which is characterised as follows. Outdoors and indoors, day and night, as well as over/near water. Requires working on or near moving equipment and vibrating equipment. Frequently the humidity is above 90%, noise is over 85 decibels and the light is intense/glare. Includes exposure to contaminants Requires working in cramped workspaces and getting into awkward positions Requires working in extremely bright or inadequate lighting conditions Potential exposure to airborne dust, fumes, and gases. Work surface is stable, height is elevated. Physical Activity/Requirements . click apply for full job details
