Eleven Eleven recruitment are seeking an experienced 360 operator for work in Ipswich, Suffolk from Thursday 3rd July on a residential site. Job role: 360 Operator Location: Ipswich, Suffolk Start: Thursday 3rd July Requirements: PPE, CPCS / NPORS, Experience on site We are seeking an experienced 360 operator to join a client operating on a residential new build site from Thursday 3rd July for a cou click apply for full job details
Jul 06, 2025
Seasonal
Eleven Eleven recruitment are seeking an experienced 360 operator for work in Ipswich, Suffolk from Thursday 3rd July on a residential site. Job role: 360 Operator Location: Ipswich, Suffolk Start: Thursday 3rd July Requirements: PPE, CPCS / NPORS, Experience on site We are seeking an experienced 360 operator to join a client operating on a residential new build site from Thursday 3rd July for a cou click apply for full job details
Eleven Eleven recruitment are seeking an experienced 360 operator for work in Colchester, Essex. Job Role: 360 Operator Location: Colchester Rates: £21.50ph Hours: 9 hours paid per day We are seeking an experienced 360 operator for work in Colchester, Essex starting Monday 16th June on a residential site click apply for full job details
Jul 05, 2025
Contractor
Eleven Eleven recruitment are seeking an experienced 360 operator for work in Colchester, Essex. Job Role: 360 Operator Location: Colchester Rates: £21.50ph Hours: 9 hours paid per day We are seeking an experienced 360 operator for work in Colchester, Essex starting Monday 16th June on a residential site click apply for full job details
360 Excavator Operators required to work on several large construction sites in the Bromsgrove, Stourport-on-Severn & Worcester areas 360 Excavator Operators must hold 360 +/- CPCS or NPORS card along with relevant on-site experience Operating Excavators (5tonne to 22tonne) on large housing & civils sites. Muckshifting, drainage, front end, footings, finishing works, grading etc 21 to 26 per hour Please call Matt on (phone number below) Call/Text anytime weekend, mid-week, evening (Please leave a detailed voice message if I miss your call) (Excavator, Excavator Operator, Excavator Driver, Digger, Digger op, Digger Driver)
Jul 05, 2025
Full time
360 Excavator Operators required to work on several large construction sites in the Bromsgrove, Stourport-on-Severn & Worcester areas 360 Excavator Operators must hold 360 +/- CPCS or NPORS card along with relevant on-site experience Operating Excavators (5tonne to 22tonne) on large housing & civils sites. Muckshifting, drainage, front end, footings, finishing works, grading etc 21 to 26 per hour Please call Matt on (phone number below) Call/Text anytime weekend, mid-week, evening (Please leave a detailed voice message if I miss your call) (Excavator, Excavator Operator, Excavator Driver, Digger, Digger op, Digger Driver)
Machine Operator required on a Cricket Pavillion and Parking Area project in Addlestone for 2 weeks. Duties: Operating 1.5 tonne machine Digging footings, grading off Manual Groundwork off the machine Assisting Labourers moving slabs Must haves: CPCS or Npors 360 Excavator card at least 5 years construction site experience at least three years operating a 360 Digger Benefits: good rates of pay Direct payment cis or paye no umbrella companies fees or extra taxes For more information about this position please contact Steve Contract Services Ltd. BCS is a well established labour supply firm that has been running for 19 years providing local sites with local labour.
Jul 05, 2025
Seasonal
Machine Operator required on a Cricket Pavillion and Parking Area project in Addlestone for 2 weeks. Duties: Operating 1.5 tonne machine Digging footings, grading off Manual Groundwork off the machine Assisting Labourers moving slabs Must haves: CPCS or Npors 360 Excavator card at least 5 years construction site experience at least three years operating a 360 Digger Benefits: good rates of pay Direct payment cis or paye no umbrella companies fees or extra taxes For more information about this position please contact Steve Contract Services Ltd. BCS is a well established labour supply firm that has been running for 19 years providing local sites with local labour.
Frontline Construction Recruitment
Griston, Norfolk
360 OPERATOR OPERATOR REQUIRED IN THETFORD 360 Operator required for an upcoming project in Thetford. Requirements: Valid Blue CPCS Above & below 10T Safety Critical Medical Valdi DBS Check Full PPE Applicants must have previous 360 Excavator Operator experience and be able to provide references from previous employers. The potential candidate for this 360 Excavator Operator position must have can do attitude, be punctual and reliable.
Jul 05, 2025
Contractor
360 OPERATOR OPERATOR REQUIRED IN THETFORD 360 Operator required for an upcoming project in Thetford. Requirements: Valid Blue CPCS Above & below 10T Safety Critical Medical Valdi DBS Check Full PPE Applicants must have previous 360 Excavator Operator experience and be able to provide references from previous employers. The potential candidate for this 360 Excavator Operator position must have can do attitude, be punctual and reliable.
Frontline Construction Recruitment
Nursling, Hampshire
Frontline Construction Recruitment Limited 360 Operator Groundworks Experience Required Southampton - SO16 Blue CPCS or NPORS We are looking for a reliable 360 Operator that can work for a project in Southampton - SO16 360 Operator will be responsible for Operating heavy machinery, Digging trenches as well as being prepared to do Groundwork duties 360 Operator must have excellent communication skills. Blue CPCS or NPORS card required Please apply only if you have experience as a 360 Operator, you have a Blue CPCS or NPORS card and can travel to Southampton - SO16
Jul 05, 2025
Contractor
Frontline Construction Recruitment Limited 360 Operator Groundworks Experience Required Southampton - SO16 Blue CPCS or NPORS We are looking for a reliable 360 Operator that can work for a project in Southampton - SO16 360 Operator will be responsible for Operating heavy machinery, Digging trenches as well as being prepared to do Groundwork duties 360 Operator must have excellent communication skills. Blue CPCS or NPORS card required Please apply only if you have experience as a 360 Operator, you have a Blue CPCS or NPORS card and can travel to Southampton - SO16
Search Recruitment Group are sourcing a 360 Operator for a site in Aberfeldy starting Monday 7th July. Duration 2 weeks work Travel Time May be paid depending on location Working Hours 07:30 - 17:00 (Monday to Thursday) 07:30 - 15:00 (Friday) Total: 43 hours per week Pay Rate Rate Negotiable PPE Requirements Hard Hat, Safety Boots (Steel Toe Cap), Gloves, Glasses, and High Vis Vest. Qualifications/Tickets CSCS Card Please contact Jennifer Buchanan on (phone number removed) if available, or send your CV along with tickets to (url removed) Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age
Jul 04, 2025
Seasonal
Search Recruitment Group are sourcing a 360 Operator for a site in Aberfeldy starting Monday 7th July. Duration 2 weeks work Travel Time May be paid depending on location Working Hours 07:30 - 17:00 (Monday to Thursday) 07:30 - 15:00 (Friday) Total: 43 hours per week Pay Rate Rate Negotiable PPE Requirements Hard Hat, Safety Boots (Steel Toe Cap), Gloves, Glasses, and High Vis Vest. Qualifications/Tickets CSCS Card Please contact Jennifer Buchanan on (phone number removed) if available, or send your CV along with tickets to (url removed) Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age
Job Title: Telehandler 360 Slew Operator Job Type: Temp Location: West Calder Pay Options: Umbrella £26ph , CIS £26ph, PAYE £17ph Days of work: Monday to Friday Hours of work: 7.30am - 5pm Duration of work: 2 Days. ARC are currently looking for a Telehandler 360 Operator to start on a busy site in in Edinburgh on Monday 23rd June click apply for full job details
Jul 04, 2025
Seasonal
Job Title: Telehandler 360 Slew Operator Job Type: Temp Location: West Calder Pay Options: Umbrella £26ph , CIS £26ph, PAYE £17ph Days of work: Monday to Friday Hours of work: 7.30am - 5pm Duration of work: 2 Days. ARC are currently looking for a Telehandler 360 Operator to start on a busy site in in Edinburgh on Monday 23rd June click apply for full job details
Recruit4staff are representing a well-established precision engineering company in their search for a CNC Programmer/Setter to work in Crewe . Job Role: Programming, setting and operating CNC milling machines using FANUC controls, working from engineering drawings to produce bespoke one-off and small batch components. The role involves machining a variety of materials including ferrous, non-ferrous, stainless steel, plastics and composites to tight tolerances. You will be responsible for producing first-off samples for inspection and ensuring accuracy throughout the machining process. Pay: Starting at £17 per hour (£35,360 per annum) Hours of Work: Monday to Friday 08:00 - 16:30 (40 hours per week) Duration: Permanent Pay review after 3 months, potential to earn up to £20 per hour (£41,600 per annum) Overtime available at enhanced rates (x1.5) 26 days holiday plus bank holidays (increasing to 31 with service) Company pension scheme Free onsite parking Programming CNC milling machines Setting and operating CNC milling machines Reading and interpreting engineering drawings Desired Skills & Experience: Experience using FANUC controls Experience in a contract machine shop Essential Qualifications: City & Guilds in Mechanical Engineering or equivalent Desired Qualifications: Similar Job Titles: CNC Programmer/Setter, CNC Machinist, CNC Miller, CNC Programmer, Precision Engineer, Mechanical Engineer, CNC Operator For further information about this role, please apply now. This vacancy is being advertised on behalf of Recruit4staff , who are operating as a recruitment agency. Recruit4staff are representing a well-established precision engineering company in their search for a CNC Machinist to work in Crewe . Job Role: The CNC Machinist will be responsible for programming, setting, and operating CNC milling machines with Heidenhain controls to produce small bespoke orders and small batches. Duties include selecting materials, machining first-off samples, and managing traceability. The role also involves maintaining the machines according to a TPM schedule and running multiple machines where feasible. Pay: £17.42 per hour Hours of Work: 39 hours per week - 7:45am to 4:45pm Monday to Thursday, 7:45am to 12:45pm Friday Duration: Temp to Perm Overtime paid at x1.5 of basic hours Early Finish Fridays Pension Free Parking CNC Programming experience CNC Setting & Operating of milling centres Working from drawings Desired Skills & Experience: Proven experience of CNC Programming Experience working with CNC turning centres Essential Qualifications: City & Guilds in Mechanical Engineering or equivalent Desired Qualifications: CNC Programming courses Similar Job Titles: CNC Machinist, CNC Miller, CNC Programmer, CNC Programmer/Setter, Precision Engineer, Mechanical Engineer For further information about this role, please apply now. This vacancy is being advertised on behalf of Recruit4staff , who are operating as a recruitment agency.
Jul 04, 2025
Full time
Recruit4staff are representing a well-established precision engineering company in their search for a CNC Programmer/Setter to work in Crewe . Job Role: Programming, setting and operating CNC milling machines using FANUC controls, working from engineering drawings to produce bespoke one-off and small batch components. The role involves machining a variety of materials including ferrous, non-ferrous, stainless steel, plastics and composites to tight tolerances. You will be responsible for producing first-off samples for inspection and ensuring accuracy throughout the machining process. Pay: Starting at £17 per hour (£35,360 per annum) Hours of Work: Monday to Friday 08:00 - 16:30 (40 hours per week) Duration: Permanent Pay review after 3 months, potential to earn up to £20 per hour (£41,600 per annum) Overtime available at enhanced rates (x1.5) 26 days holiday plus bank holidays (increasing to 31 with service) Company pension scheme Free onsite parking Programming CNC milling machines Setting and operating CNC milling machines Reading and interpreting engineering drawings Desired Skills & Experience: Experience using FANUC controls Experience in a contract machine shop Essential Qualifications: City & Guilds in Mechanical Engineering or equivalent Desired Qualifications: Similar Job Titles: CNC Programmer/Setter, CNC Machinist, CNC Miller, CNC Programmer, Precision Engineer, Mechanical Engineer, CNC Operator For further information about this role, please apply now. This vacancy is being advertised on behalf of Recruit4staff , who are operating as a recruitment agency. Recruit4staff are representing a well-established precision engineering company in their search for a CNC Machinist to work in Crewe . Job Role: The CNC Machinist will be responsible for programming, setting, and operating CNC milling machines with Heidenhain controls to produce small bespoke orders and small batches. Duties include selecting materials, machining first-off samples, and managing traceability. The role also involves maintaining the machines according to a TPM schedule and running multiple machines where feasible. Pay: £17.42 per hour Hours of Work: 39 hours per week - 7:45am to 4:45pm Monday to Thursday, 7:45am to 12:45pm Friday Duration: Temp to Perm Overtime paid at x1.5 of basic hours Early Finish Fridays Pension Free Parking CNC Programming experience CNC Setting & Operating of milling centres Working from drawings Desired Skills & Experience: Proven experience of CNC Programming Experience working with CNC turning centres Essential Qualifications: City & Guilds in Mechanical Engineering or equivalent Desired Qualifications: CNC Programming courses Similar Job Titles: CNC Machinist, CNC Miller, CNC Programmer, CNC Programmer/Setter, Precision Engineer, Mechanical Engineer For further information about this role, please apply now. This vacancy is being advertised on behalf of Recruit4staff , who are operating as a recruitment agency.
Eleven Eleven Recruitment is seeking an experienced 360 operator for work in Lowestoft, Suffolk, starting Monday 7th July. Job Role: 360 Operator Start Date: Monday 7th July Rate:£22.00ph Location: Lowestoft Duration: On-going Requirements: NPORS/ CPCS Minimum Requirements: - NPORS/ CPCS - PPE - Minimum of 3 years experience operating a machine To apply for this role please call us on or a click apply for full job details
Jul 04, 2025
Seasonal
Eleven Eleven Recruitment is seeking an experienced 360 operator for work in Lowestoft, Suffolk, starting Monday 7th July. Job Role: 360 Operator Start Date: Monday 7th July Rate:£22.00ph Location: Lowestoft Duration: On-going Requirements: NPORS/ CPCS Minimum Requirements: - NPORS/ CPCS - PPE - Minimum of 3 years experience operating a machine To apply for this role please call us on or a click apply for full job details
Job Title: 360 Operator Job Type: Temporary Location: Great Yarmouth Rate of pay: Paye £14, Umbrella £19, CIS £19. Are you a 360 Operator looking for work? ARC are currently looking for a 360 Operator. For this position, you must have the following: • CPCS or NPORs with Lifting operations • Full PPE This temporary work for a 360 Operator is for an ongoing duration on a site in Great Yarmouth click apply for full job details
Jul 04, 2025
Seasonal
Job Title: 360 Operator Job Type: Temporary Location: Great Yarmouth Rate of pay: Paye £14, Umbrella £19, CIS £19. Are you a 360 Operator looking for work? ARC are currently looking for a 360 Operator. For this position, you must have the following: • CPCS or NPORs with Lifting operations • Full PPE This temporary work for a 360 Operator is for an ongoing duration on a site in Great Yarmouth click apply for full job details
360 Excavator Operator Wanted - Start Monday! Location: Cheltenham Duration: 3-4 Weeks Rate: £22.00 per hour Project: Emergency Utilities Work Working for: Winner Recruitment Winner Recruitment is urgently seeking a skilled 360 Excavator Operator for a critical emergency utilities project starting Monday in Cheltenham click apply for full job details
Jul 04, 2025
Seasonal
360 Excavator Operator Wanted - Start Monday! Location: Cheltenham Duration: 3-4 Weeks Rate: £22.00 per hour Project: Emergency Utilities Work Working for: Winner Recruitment Winner Recruitment is urgently seeking a skilled 360 Excavator Operator for a critical emergency utilities project starting Monday in Cheltenham click apply for full job details
Eleven Eleven Recruitment are seeking an experienced 360 operator to join a site in Norwich from Monday 2nd June for a few weeks hire carrying out deep drainage. Job Role: 360 Work Start Date: Monday 2nd June Duration: 2 weeks hire minimum Minimum Requirements: CPCS, PPE & Min 3 years operating Location: Norwich We are seeking an experienced operator for this role who can carry out deep drainage click apply for full job details
Jul 03, 2025
Contractor
Eleven Eleven Recruitment are seeking an experienced 360 operator to join a site in Norwich from Monday 2nd June for a few weeks hire carrying out deep drainage. Job Role: 360 Work Start Date: Monday 2nd June Duration: 2 weeks hire minimum Minimum Requirements: CPCS, PPE & Min 3 years operating Location: Norwich We are seeking an experienced operator for this role who can carry out deep drainage click apply for full job details
Eleven Eleven Recruitment is seeking an experienced 360 operator for work in Lowestoft, Suffolk, starting Monday 7th July. Job Role: 360 Operator Start Date: Monday 7th July Rate: 22.00ph Location: Lowestoft Duration: On-going Requirements: NPORS/ CPCS Minimum Requirements: - NPORS/ CPCS - PPE - Minimum of 3 years experience operating a machine To apply for this role please call us on (phone number removed) or apply online to (url removed)
Jul 03, 2025
Seasonal
Eleven Eleven Recruitment is seeking an experienced 360 operator for work in Lowestoft, Suffolk, starting Monday 7th July. Job Role: 360 Operator Start Date: Monday 7th July Rate: 22.00ph Location: Lowestoft Duration: On-going Requirements: NPORS/ CPCS Minimum Requirements: - NPORS/ CPCS - PPE - Minimum of 3 years experience operating a machine To apply for this role please call us on (phone number removed) or apply online to (url removed)
CNC Operator with Turning experience CNC Programmer Setter Operator Your new company Based near Milton Keynes we are working with a leading company in the design, development, and manufacture of innovative piling and foundation equipment. They are recruiting for a CNC Turner with ideally Programming, Setting and Operating experience to join and be part of their manufacturing workshop team. The site is equipped with advanced CNC machinery, including Doosan Puma 2600SY II and Leadwell Turning Centre LTC-25i LVM, both with Fanuc controls. Your new role As a CNC Programmer Setter Operator, you will be responsible for programming, setting, and operating CNC lathes. You will work with Fanuc controlled machines, programming directly at the machine. The role requires experience with CNC lathes, and the ability to set and operate them. We offer training for the right candidate, but prior experience is essential. You will also be required to complete a pre-screening test involving G-code programming for a provided drawing prior to an on-site interview. Key Responsibilities: Programme, set, and operate turning centres with live tooling, CNC lathes using Fanuc control system, CNC vertical and horizontal twin pallet mills. Operate 5 Axis CNC machining centre with 8 Pallet AWC. Select appropriate tools and machine settings. Set and operate manual milling, turning, and grinding machines. Check parts are to drawing using measuring equipment. Work with Process Engineer to ensure set-up sheets are maintained and kept up to date. Complete production job documentation. Prepare raw materials for use. Material handling. Carry out weekly/monthly fluid checks and machine maintenance. Keep workspace and machines clean and tidy. Ensure all health and safety guidelines are adhered to and make recommendations for improvement. Carry out any other reasonable task as requested within your capability. Performance Measures: % of non-conforming components produced. % On-time delivery of components to plan. What you'll need to succeed Qualifications: Minimum of 3 years' experience setting and operating CNC lathes and mills with Fanuc controls. A relevant manufacturing engineering qualification. Skills & Experience required: Ability to programme, set, and operate CNC lathes and/or milling machines including set up of tooling. Experience in a similar role within a manufacturing / engineering environment, Ability to read and interpret manufacturing drawings. Understanding of engineering tolerances. Using micrometres, verniers, and gauges to inspect parts. CAD/CAM offline programming, using Fusion 360 (desirable). Excellent communication skills. Strong problem-solving skills and attention to detail. Proactive and positive approach. What you'll get in return Competitive salary, depending on experience. Standard working hours: 7.45am to 4.30pm Monday to Thursday, and 7.45am to 3.30pm on Fridays. Overtime opportunities with enhanced pay rates. 25 days annual leave plus bank holidays. Pension scheme, life cover, employee assistance programme and cycle to work scheme upon successful completion of the probation period. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job isn't quite right for you, but you are looking for a new position, please contact us now on for a confidential discussion about your career. #
Jul 03, 2025
Full time
CNC Operator with Turning experience CNC Programmer Setter Operator Your new company Based near Milton Keynes we are working with a leading company in the design, development, and manufacture of innovative piling and foundation equipment. They are recruiting for a CNC Turner with ideally Programming, Setting and Operating experience to join and be part of their manufacturing workshop team. The site is equipped with advanced CNC machinery, including Doosan Puma 2600SY II and Leadwell Turning Centre LTC-25i LVM, both with Fanuc controls. Your new role As a CNC Programmer Setter Operator, you will be responsible for programming, setting, and operating CNC lathes. You will work with Fanuc controlled machines, programming directly at the machine. The role requires experience with CNC lathes, and the ability to set and operate them. We offer training for the right candidate, but prior experience is essential. You will also be required to complete a pre-screening test involving G-code programming for a provided drawing prior to an on-site interview. Key Responsibilities: Programme, set, and operate turning centres with live tooling, CNC lathes using Fanuc control system, CNC vertical and horizontal twin pallet mills. Operate 5 Axis CNC machining centre with 8 Pallet AWC. Select appropriate tools and machine settings. Set and operate manual milling, turning, and grinding machines. Check parts are to drawing using measuring equipment. Work with Process Engineer to ensure set-up sheets are maintained and kept up to date. Complete production job documentation. Prepare raw materials for use. Material handling. Carry out weekly/monthly fluid checks and machine maintenance. Keep workspace and machines clean and tidy. Ensure all health and safety guidelines are adhered to and make recommendations for improvement. Carry out any other reasonable task as requested within your capability. Performance Measures: % of non-conforming components produced. % On-time delivery of components to plan. What you'll need to succeed Qualifications: Minimum of 3 years' experience setting and operating CNC lathes and mills with Fanuc controls. A relevant manufacturing engineering qualification. Skills & Experience required: Ability to programme, set, and operate CNC lathes and/or milling machines including set up of tooling. Experience in a similar role within a manufacturing / engineering environment, Ability to read and interpret manufacturing drawings. Understanding of engineering tolerances. Using micrometres, verniers, and gauges to inspect parts. CAD/CAM offline programming, using Fusion 360 (desirable). Excellent communication skills. Strong problem-solving skills and attention to detail. Proactive and positive approach. What you'll get in return Competitive salary, depending on experience. Standard working hours: 7.45am to 4.30pm Monday to Thursday, and 7.45am to 3.30pm on Fridays. Overtime opportunities with enhanced pay rates. 25 days annual leave plus bank holidays. Pension scheme, life cover, employee assistance programme and cycle to work scheme upon successful completion of the probation period. What you need to do now If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job isn't quite right for you, but you are looking for a new position, please contact us now on for a confidential discussion about your career. #
Eleven Eleven recruitment are seeking an experienced 360 operator for work in Ipswich, Suffolk from Thursday 3rd July on a residential site. Job role: 360 Operator Location: Ipswich, Suffolk Start: Thursday 3rd July Requirements: PPE, CPCS / NPORS, Experience on site We are seeking an experienced 360 operator to join a client operating on a residential new build site from Thursday 3rd July for a couple of weeks. Minimum Requirements: - CPCS / NPORS - PPE - Experience operating a 360 3+ years Payments: - 22.00 ph CIS - 9 Hours paid - Payments made every Friday To apply for this role please call us on (phone number removed) or email us an up to date CV to (url removed)
Jul 03, 2025
Seasonal
Eleven Eleven recruitment are seeking an experienced 360 operator for work in Ipswich, Suffolk from Thursday 3rd July on a residential site. Job role: 360 Operator Location: Ipswich, Suffolk Start: Thursday 3rd July Requirements: PPE, CPCS / NPORS, Experience on site We are seeking an experienced 360 operator to join a client operating on a residential new build site from Thursday 3rd July for a couple of weeks. Minimum Requirements: - CPCS / NPORS - PPE - Experience operating a 360 3+ years Payments: - 22.00 ph CIS - 9 Hours paid - Payments made every Friday To apply for this role please call us on (phone number removed) or email us an up to date CV to (url removed)
Eleven Eleven recruitment are seeking an experienced 360 Operator in Stowmarket, Suffolk. This role is to commence Monday 21st June for finishing works on a site. Minimum Requirements: - CPCS / NPORS - PPE - Minimum of 3 years operating experience About the role: - Operating a mini digger on site Payments - 9 hours paid per day - £21 click apply for full job details
Jul 02, 2025
Contractor
Eleven Eleven recruitment are seeking an experienced 360 Operator in Stowmarket, Suffolk. This role is to commence Monday 21st June for finishing works on a site. Minimum Requirements: - CPCS / NPORS - PPE - Minimum of 3 years operating experience About the role: - Operating a mini digger on site Payments - 9 hours paid per day - £21 click apply for full job details
360 Excavator Operators Wanted Edinburgh Copa is currently looking to expand its team of experienced 360 Excavator Operators (Above and Below 10T) for ongoing projects in the Edinburgh area . Working Hours: Monday to Friday 07:00 to 17:00 Location: Various sites across Edinburgh Requirements: Valid CPCS or NPORS (with CSCS logo ) certification Proven experience operating 360 excavators (above and below 10 click apply for full job details
Jul 01, 2025
Contractor
360 Excavator Operators Wanted Edinburgh Copa is currently looking to expand its team of experienced 360 Excavator Operators (Above and Below 10T) for ongoing projects in the Edinburgh area . Working Hours: Monday to Friday 07:00 to 17:00 Location: Various sites across Edinburgh Requirements: Valid CPCS or NPORS (with CSCS logo ) certification Proven experience operating 360 excavators (above and below 10 click apply for full job details
We are looking for experienced Telehandler 360 Slew Operators to join our team on a project at Tilbury Docks Requirements : CPCS/NPORS Card - Ideally blue Minimum of 5 years of experience What We Offer: The opportunity to work with a reputable contractor on a prestigious project. A supportive and professional working environment. About Us: Teamforce Labour is a trusted provider of skilled personnel to the Rail, Civil, and Construction industries across the UK. We pride ourselves on delivering top-quality talent to our clients while fostering fair and inclusive recruitment practices. Equal Opportunities Statement: We are committed to diversity and inclusion in the workplace. All candidates will be considered based on their qualifications and experience without regard to age, race, gender, disability, religion, or any other protected characteristic. If you require reasonable adjustments during the application or interview process, please let us know.
Jun 30, 2025
Seasonal
We are looking for experienced Telehandler 360 Slew Operators to join our team on a project at Tilbury Docks Requirements : CPCS/NPORS Card - Ideally blue Minimum of 5 years of experience What We Offer: The opportunity to work with a reputable contractor on a prestigious project. A supportive and professional working environment. About Us: Teamforce Labour is a trusted provider of skilled personnel to the Rail, Civil, and Construction industries across the UK. We pride ourselves on delivering top-quality talent to our clients while fostering fair and inclusive recruitment practices. Equal Opportunities Statement: We are committed to diversity and inclusion in the workplace. All candidates will be considered based on their qualifications and experience without regard to age, race, gender, disability, religion, or any other protected characteristic. If you require reasonable adjustments during the application or interview process, please let us know.
Job: 360 & 180 Excavator Driver - Warrington Location: Warrington Duration: 2 Weeks Hours: 10 hours per day / 50 hours per week Start Date: Immediate LRL are currently recruiting for experienced 360 & 180 Excavator Operators to join a short-term project based in Warrington. We're looking for skilled plant operators with proven experience in pipework and drainage to support a busy site team. This role is ideal for someone who's reliable, safety-conscious, and ready to hit the ground running. Duties will include: Operating 360 Excavators (Above & Below 10T) and 180 Excavators (Above & Below 5T) Executing lifting duties using the appropriate CPCS category Assisting with groundworks , including the installation of pipework and drainage systems Following site instructions and working collaboratively with ground teams Ensuring all work is carried out safely and to a high standard Requirements: Valid CPCS card with lifting operations endorsement Proven experience in pipe laying and drainage work Minimum of 2 project-specific references A proactive attitude with a commitment to health & safety Rates: Dependant on experience If you're a reliable operator with the right experience, we want to hear from you. Apply now or get in touch with the LRL team today!
Jun 30, 2025
Contractor
Job: 360 & 180 Excavator Driver - Warrington Location: Warrington Duration: 2 Weeks Hours: 10 hours per day / 50 hours per week Start Date: Immediate LRL are currently recruiting for experienced 360 & 180 Excavator Operators to join a short-term project based in Warrington. We're looking for skilled plant operators with proven experience in pipework and drainage to support a busy site team. This role is ideal for someone who's reliable, safety-conscious, and ready to hit the ground running. Duties will include: Operating 360 Excavators (Above & Below 10T) and 180 Excavators (Above & Below 5T) Executing lifting duties using the appropriate CPCS category Assisting with groundworks , including the installation of pipework and drainage systems Following site instructions and working collaboratively with ground teams Ensuring all work is carried out safely and to a high standard Requirements: Valid CPCS card with lifting operations endorsement Proven experience in pipe laying and drainage work Minimum of 2 project-specific references A proactive attitude with a commitment to health & safety Rates: Dependant on experience If you're a reliable operator with the right experience, we want to hear from you. Apply now or get in touch with the LRL team today!