The Staffing Network is a labour provider across the UK. Plater/Fabricator required to work from , Chesterfield Type of Work Permanent position with a well-established steel fabrication company (over 45 years in business). Specialising in medium/heavy bespoke steel fabrications including bridges, staircases, and gantries (Road & Rail). Work involves fabrication, welding, and development in a heavy engineering environment. Shift Patterns Monday to Thursday: 06 30 (4-day working week) Overtime available at time and a half Expected hours: 40 per week Pay Rates (PAYE) Standard Rate: £16.00 £17.00 PAYE / £18.40 £19.55 inc Holiday Overtime Rate: Time and a half Requirements Confident plater or fabricator Ideally apprentice trained or holding relevant qualifications Strong MIG welding skills Experience operating fabrication machinery Must have worked within a heavy steel industry Ability to read and work from engineering drawings from scratch Good understanding of health & safety procedures Minimum 5 years experience preferred Benefits All workers with The Staffing Network get Staffing Network Rewards offering discounts of up to 70% online and on the High Street. Additional company benefits include: Company pension On-site parking Company sick pay Free tea/coffee Structured training and development plans Genuine progression opportunities Apply Now Call Maisie on (phone number removed) or WhatsApp PLATERSTAVELEY to (phone number removed) Or apply below for more information.
Aug 12, 2025
Full time
The Staffing Network is a labour provider across the UK. Plater/Fabricator required to work from , Chesterfield Type of Work Permanent position with a well-established steel fabrication company (over 45 years in business). Specialising in medium/heavy bespoke steel fabrications including bridges, staircases, and gantries (Road & Rail). Work involves fabrication, welding, and development in a heavy engineering environment. Shift Patterns Monday to Thursday: 06 30 (4-day working week) Overtime available at time and a half Expected hours: 40 per week Pay Rates (PAYE) Standard Rate: £16.00 £17.00 PAYE / £18.40 £19.55 inc Holiday Overtime Rate: Time and a half Requirements Confident plater or fabricator Ideally apprentice trained or holding relevant qualifications Strong MIG welding skills Experience operating fabrication machinery Must have worked within a heavy steel industry Ability to read and work from engineering drawings from scratch Good understanding of health & safety procedures Minimum 5 years experience preferred Benefits All workers with The Staffing Network get Staffing Network Rewards offering discounts of up to 70% online and on the High Street. Additional company benefits include: Company pension On-site parking Company sick pay Free tea/coffee Structured training and development plans Genuine progression opportunities Apply Now Call Maisie on (phone number removed) or WhatsApp PLATERSTAVELEY to (phone number removed) Or apply below for more information.
Wage 16phr for someone who is unfamiliar with the milling tooling but has a knowledge of tooling and 18 for someone who has instant knowledge of the milling tooling Hours of work/shifts- days 39hrs /week Job Description The tooling technician is responsible for the overall management of the tool stores, for assembling the tools, measuring their length and diameter on a tool pre-setter and issuing the machines. Candidate experience/qualities required A good knowledge of the various types of machine tooling used such as drilling tools, milling tools, boring tools. Etc A neat and organised mind The ability to work unsupervised To be conscientious and take responsibility for all aspects of the job Tooling Technician duties Assembling cnc machine tooling Issuing tool numbers Measuring tool lengths and diameters on a tool pre setter Ensuring tools are stored correctly and kept in good order Managing the spares for the various types of tools used Managing the indexable inserts required for the tools used Sending tools for regrinding when required Ensuring that the tool stores are kept in an orderly and tidy fashion What can our client offer Please note that if you have applied for a role but do not meet the criteria outlined above we will not be able to take your cv forward to the next stage. At Ambitek we can cover blue collar and white collar roles, we cover a variety of roles from cnc machinists, Welders, Platers, Fitters, Maintenance engineering, Inspectors, Mechanical fitters, Sheet Metal Workers through to Sales Engineers, Design Engineers, Production and Planning roles through to senior management roles. If this role does not suit please get in touch and we may be able to find something suitable
Aug 11, 2025
Full time
Wage 16phr for someone who is unfamiliar with the milling tooling but has a knowledge of tooling and 18 for someone who has instant knowledge of the milling tooling Hours of work/shifts- days 39hrs /week Job Description The tooling technician is responsible for the overall management of the tool stores, for assembling the tools, measuring their length and diameter on a tool pre-setter and issuing the machines. Candidate experience/qualities required A good knowledge of the various types of machine tooling used such as drilling tools, milling tools, boring tools. Etc A neat and organised mind The ability to work unsupervised To be conscientious and take responsibility for all aspects of the job Tooling Technician duties Assembling cnc machine tooling Issuing tool numbers Measuring tool lengths and diameters on a tool pre setter Ensuring tools are stored correctly and kept in good order Managing the spares for the various types of tools used Managing the indexable inserts required for the tools used Sending tools for regrinding when required Ensuring that the tool stores are kept in an orderly and tidy fashion What can our client offer Please note that if you have applied for a role but do not meet the criteria outlined above we will not be able to take your cv forward to the next stage. At Ambitek we can cover blue collar and white collar roles, we cover a variety of roles from cnc machinists, Welders, Platers, Fitters, Maintenance engineering, Inspectors, Mechanical fitters, Sheet Metal Workers through to Sales Engineers, Design Engineers, Production and Planning roles through to senior management roles. If this role does not suit please get in touch and we may be able to find something suitable
Job Title: CNC Vertical Borer Excellent opportunity for an experienced CNC Borer from a manufacturing / engineering environment. We have worked with this client for several years; they offer a first class working environment and the opportunity to work in the Manufacturing sector. CNC VTL Borer Main Duties: Time served Able to work with large components up to 35 ton Programme, set and operate with fanuc controls Read engineering drawings Inspect own work They require a CNC Vertical Borer with a minimum 5 years experience. Qualifications / Skills/ Experience: A minimum of 5 years experience as a vertical borer Served an apprenticeship in CNC Machining Salary / Hourly Rates: Mornings 6:45am until 15:15pm Monday to Thursday and 6:45am until 14:15pm Friday (39 Hours) £20.32 plus overtime at Time and Half and Double time Sunday. Afternoons Monday to Thursday 3pm to 12am 36 hours £25.39 plus overtime at Time and Half of the day rate (£20.32) and Double time Sunday. How to apply for the CNC Vertical Borer role: Apply in word format Ambitek are specialist recruiters in Manufacturing, Production and the Engineering sectors. We recruit for blue collar and white-collar roles, covering a variety of roles from cnc machinists, Welders, Platers, Fitters, Maintenance engineers, Inspectors, Mechanical fitters, Sheet Metal Workers through to Sales Engineers, Design Engineers, Production and Planning roles and management positions. If this role does not suite, please get in touch and we may be able to find something suitable. Please note that if you have applied for a role but do not meet the criteria outlined above, we will not be able to take your cv forward to the next stage and due to the volume of applicants we may not be able to respond to all applicants. If you haven t heard from us within 48 hours you will have been unsuccessful.
Aug 10, 2025
Full time
Job Title: CNC Vertical Borer Excellent opportunity for an experienced CNC Borer from a manufacturing / engineering environment. We have worked with this client for several years; they offer a first class working environment and the opportunity to work in the Manufacturing sector. CNC VTL Borer Main Duties: Time served Able to work with large components up to 35 ton Programme, set and operate with fanuc controls Read engineering drawings Inspect own work They require a CNC Vertical Borer with a minimum 5 years experience. Qualifications / Skills/ Experience: A minimum of 5 years experience as a vertical borer Served an apprenticeship in CNC Machining Salary / Hourly Rates: Mornings 6:45am until 15:15pm Monday to Thursday and 6:45am until 14:15pm Friday (39 Hours) £20.32 plus overtime at Time and Half and Double time Sunday. Afternoons Monday to Thursday 3pm to 12am 36 hours £25.39 plus overtime at Time and Half of the day rate (£20.32) and Double time Sunday. How to apply for the CNC Vertical Borer role: Apply in word format Ambitek are specialist recruiters in Manufacturing, Production and the Engineering sectors. We recruit for blue collar and white-collar roles, covering a variety of roles from cnc machinists, Welders, Platers, Fitters, Maintenance engineers, Inspectors, Mechanical fitters, Sheet Metal Workers through to Sales Engineers, Design Engineers, Production and Planning roles and management positions. If this role does not suite, please get in touch and we may be able to find something suitable. Please note that if you have applied for a role but do not meet the criteria outlined above, we will not be able to take your cv forward to the next stage and due to the volume of applicants we may not be able to respond to all applicants. If you haven t heard from us within 48 hours you will have been unsuccessful.
Our client, based in Radcliffe, require 3 Process Operatives. Production Operative They are leaders in their sector, producing paper products for blue chip consumer goods. They offer excellent holiday, pension & regular overtime as part of the package. Production Operative: Main Duties: 1. Unloading the raw materials - FLT training given if required. 2. Loading the raw material in to the process machines. 3. Start up & Shut down of the machinery 4. Ensuring safe & efficient running of the manufacturing process. 5. Full training given. You will need some manufacturing / process experience. Hours of work: Average 41.6 hours per week. Working Days & Nights including some weekends. Flexibility is needed to follow a continental shift pattern. 7 DAYS OFF EVERY 4 WEEKS. What they are looking for in candidates: Qualifications / Skills/ Experience: Experience of working in a manual, process driven manufacturing company such as: Food industry. FMCG environment. Chemical Industry. Used to strict health & safety processes at all times. Salary / Hourly Rates: £31,166 pa plus overtime. Overtime available. Benefits Package: Excellent pension plan - Up to 8% matched by the employer. 7 days holiday every 4 weeks worked. Opportunity to prrogress to Team Leader role (£47K). How to apply for the role: Ambitek is a specialist recruiter in Manufacturing, Production and the Engineering sectors. We recruit for blue collar and white-collar roles, covering a variety of roles from cnc machinists, Welders, Platers, Fitters, Maintenance engineers, Inspectors, Mechanical fitters, Sheet Metal Workers through to Sales Engineers, Design Engineers, Production and Planning roles and management positions. If this role does not suite, please get in touch and we may be able to find something suitable. Please note that if you have applied for a role but do not meet the criteria outlined above, we will not be able to take your cv forward to the next stage and due to the volume of applicants we may not be able to respond to all applicants. If you haven t heard from us within 48 hours you will have been unsuccessful.
Aug 05, 2025
Full time
Our client, based in Radcliffe, require 3 Process Operatives. Production Operative They are leaders in their sector, producing paper products for blue chip consumer goods. They offer excellent holiday, pension & regular overtime as part of the package. Production Operative: Main Duties: 1. Unloading the raw materials - FLT training given if required. 2. Loading the raw material in to the process machines. 3. Start up & Shut down of the machinery 4. Ensuring safe & efficient running of the manufacturing process. 5. Full training given. You will need some manufacturing / process experience. Hours of work: Average 41.6 hours per week. Working Days & Nights including some weekends. Flexibility is needed to follow a continental shift pattern. 7 DAYS OFF EVERY 4 WEEKS. What they are looking for in candidates: Qualifications / Skills/ Experience: Experience of working in a manual, process driven manufacturing company such as: Food industry. FMCG environment. Chemical Industry. Used to strict health & safety processes at all times. Salary / Hourly Rates: £31,166 pa plus overtime. Overtime available. Benefits Package: Excellent pension plan - Up to 8% matched by the employer. 7 days holiday every 4 weeks worked. Opportunity to prrogress to Team Leader role (£47K). How to apply for the role: Ambitek is a specialist recruiter in Manufacturing, Production and the Engineering sectors. We recruit for blue collar and white-collar roles, covering a variety of roles from cnc machinists, Welders, Platers, Fitters, Maintenance engineers, Inspectors, Mechanical fitters, Sheet Metal Workers through to Sales Engineers, Design Engineers, Production and Planning roles and management positions. If this role does not suite, please get in touch and we may be able to find something suitable. Please note that if you have applied for a role but do not meet the criteria outlined above, we will not be able to take your cv forward to the next stage and due to the volume of applicants we may not be able to respond to all applicants. If you haven t heard from us within 48 hours you will have been unsuccessful.
Job Title Steelworker Location Barrow, United Kingdom Salary & Shifts Range of payrates based on shifts, full breakdown below Introduction - What's special about us? Our partner, BAE Systems, are seeking experienced Steel worker to join their growing team in Barrow on a 12-month contract, offering competitive rates for both locals and those willing to commute from further afield. As part of a specialist team, you'll be working on the latest generation of Submarines, Either Astute or Dreadnought Projects. If you're interested in learning more about this opportunity, click the apply button now, or read on to find out more. What will I be doing? Shipwright - Fabrication, assembly, installation of Steelwork, Woodwork and composite structures and supporting activities. Manufacture - Pre-fabrication and manufacture of steelwork, structures and items. Pay rates BAE Systems offers a range of payrates for PAYE and Umbrella contractors, depending on your allocated shifts, and the distance you're travelling to reach the Barrow Site. Please see Below for Rates. The rates for Barrow if you are living more than 39 miles of the base. PAYE Matchtech Barrow shift patterns Hourly Rate Hourly Holiday accrual or paid in advance Total hourly rate inclusive of holiday Standard shift 27.40 3.98 31.38 3 on 4 off 31.28 4.55 35.83 Night shift 33.80 4.91 38.71 Weekday & Saturday overtime 31.52 (inclusive of holiday) 31.52 Sunday overtime 42.02 (inclusive of holiday) 42.02 PAYE Umbrella Barrow shift patterns Rate Standard Shift 36.80 3 on 4 off 41.93 Night shift 45.27 Weekday and Saturday Overtime 37.34 Sunday Overtime 49.48
Jul 30, 2025
Contractor
Job Title Steelworker Location Barrow, United Kingdom Salary & Shifts Range of payrates based on shifts, full breakdown below Introduction - What's special about us? Our partner, BAE Systems, are seeking experienced Steel worker to join their growing team in Barrow on a 12-month contract, offering competitive rates for both locals and those willing to commute from further afield. As part of a specialist team, you'll be working on the latest generation of Submarines, Either Astute or Dreadnought Projects. If you're interested in learning more about this opportunity, click the apply button now, or read on to find out more. What will I be doing? Shipwright - Fabrication, assembly, installation of Steelwork, Woodwork and composite structures and supporting activities. Manufacture - Pre-fabrication and manufacture of steelwork, structures and items. Pay rates BAE Systems offers a range of payrates for PAYE and Umbrella contractors, depending on your allocated shifts, and the distance you're travelling to reach the Barrow Site. Please see Below for Rates. The rates for Barrow if you are living more than 39 miles of the base. PAYE Matchtech Barrow shift patterns Hourly Rate Hourly Holiday accrual or paid in advance Total hourly rate inclusive of holiday Standard shift 27.40 3.98 31.38 3 on 4 off 31.28 4.55 35.83 Night shift 33.80 4.91 38.71 Weekday & Saturday overtime 31.52 (inclusive of holiday) 31.52 Sunday overtime 42.02 (inclusive of holiday) 42.02 PAYE Umbrella Barrow shift patterns Rate Standard Shift 36.80 3 on 4 off 41.93 Night shift 45.27 Weekday and Saturday Overtime 37.34 Sunday Overtime 49.48
Job Title: Production Operative: Our client, based in Salford, is looking to recruit an experienced Production Operative. We have worked with this client for several years; they offer a first class working environment and the opportunity to work in the Manufacturing sector. Production Operative: Salary Range: £30,000 - £31,2000 pa Dependant on skills and experience. Safe and efficient operation of production machinery and assembly of customer products. Candidate must be Health/Safety aware and conform to all H/S Procedures, be able to follow Instruction and Ideally come from a manufacturing background Mixing Powders Pressing Powders Operation of Sintering Furnaces and Ovens Brass and Paint Spraying Product Testing and Recording Assembly of Components and Discs to Finished Products Some training will be expected to be required. They require a Production Operative with a minimum 2 years experience. Hours of work: Friday/Saturday/Sunday nights 19 00 with 30 minute unpaid lunch break. Paid 34.5 hours. What they are looking for in candidates: Qualifications / Skills/ Experience: Someone who has experience with standard operating procedures in a Manufacturing environment. Salary / Hourly Rates: Circa £16.72 per hour x 34.5 Hours. How to apply for the role: Send your CV in the first instance. Ambitek is a specialist recruiter in Manufacturing, Production and the Engineering sectors. We recruit for blue collar and white-collar roles, covering a variety of roles from cnc machinists, Welders, Platers, Fitters, Maintenance engineers, Inspectors, Mechanical fitters, Sheet Metal Workers through to Sales Engineers, Design Engineers, Production and Planning roles and management positions. If this role does not suite, please get in touch and we may be able to find something suitable. Please note that if you have applied for a role but do not meet the criteria outlined above, we will not be able to take your cv forward to the next stage and due to the volume of applicants we may not be able to respond to all applicants. If you haven t heard from us within 48 hours you will have been unsuccessful.
Jul 27, 2025
Contractor
Job Title: Production Operative: Our client, based in Salford, is looking to recruit an experienced Production Operative. We have worked with this client for several years; they offer a first class working environment and the opportunity to work in the Manufacturing sector. Production Operative: Salary Range: £30,000 - £31,2000 pa Dependant on skills and experience. Safe and efficient operation of production machinery and assembly of customer products. Candidate must be Health/Safety aware and conform to all H/S Procedures, be able to follow Instruction and Ideally come from a manufacturing background Mixing Powders Pressing Powders Operation of Sintering Furnaces and Ovens Brass and Paint Spraying Product Testing and Recording Assembly of Components and Discs to Finished Products Some training will be expected to be required. They require a Production Operative with a minimum 2 years experience. Hours of work: Friday/Saturday/Sunday nights 19 00 with 30 minute unpaid lunch break. Paid 34.5 hours. What they are looking for in candidates: Qualifications / Skills/ Experience: Someone who has experience with standard operating procedures in a Manufacturing environment. Salary / Hourly Rates: Circa £16.72 per hour x 34.5 Hours. How to apply for the role: Send your CV in the first instance. Ambitek is a specialist recruiter in Manufacturing, Production and the Engineering sectors. We recruit for blue collar and white-collar roles, covering a variety of roles from cnc machinists, Welders, Platers, Fitters, Maintenance engineers, Inspectors, Mechanical fitters, Sheet Metal Workers through to Sales Engineers, Design Engineers, Production and Planning roles and management positions. If this role does not suite, please get in touch and we may be able to find something suitable. Please note that if you have applied for a role but do not meet the criteria outlined above, we will not be able to take your cv forward to the next stage and due to the volume of applicants we may not be able to respond to all applicants. If you haven t heard from us within 48 hours you will have been unsuccessful.
Job Title: Production Operative: Our client, based on the Eccles/ Salford Quays boundary, is looking to recruit an experienced Production Operative. We have worked with this client for several years; they offer a first class working environment and the opportunity to work in the Manufacturing sector. Production Operative: Hourly rate: £15.05 per hour. Overtime paid at time & half. Basic 34.5 hours per week. Hours of Work: Friday, Saturday & Sunday. 07.00 - 19.00. Safe and efficient operation of production machinery and assembly of customer products. Candidate must be Health/Safety aware and conform to all H/S Procedures, be able to follow Instruction and Ideally come from a manufacturing background Mixing Powders Pressing Powders Operation of Sintering Furnaces and Ovens Brass and Paint Spraying Product Testing and Recording Assembly of Components and Discs to Finished Products Some training will be expected to be required. They require a Production Operative with a minimum 2 years experience. Hours of work: You will need to work Friday, Saturday & Sunday each week. As above: 12 hour shifts. What they are looking for in candidates: Qualifications / Skills/ Experience: Someone who has experience with standard operating procedures in a Manufacturing environment. Salary / Hourly Rates: £15.05 per hour x 34.5 Hours. How to apply for the role: Send your CV in the first instance. Ambitek is a specialist recruiter in Manufacturing, Production and the Engineering sectors. We recruit for blue collar and white-collar roles, covering a variety of roles from cnc machinists, Welders, Platers, Fitters, Maintenance engineers, Inspectors, Mechanical fitters, Sheet Metal Workers through to Sales Engineers, Design Engineers, Production and Planning roles and management positions. If this role does not suite, please get in touch and we may be able to find something suitable. Please note that if you have applied for a role but do not meet the criteria outlined above, we will not be able to take your cv forward to the next stage and due to the volume of applicants we may not be able to respond to all applicants. If you haven t heard from us within 48 hours you will have been unsuccessful.
Jul 27, 2025
Contractor
Job Title: Production Operative: Our client, based on the Eccles/ Salford Quays boundary, is looking to recruit an experienced Production Operative. We have worked with this client for several years; they offer a first class working environment and the opportunity to work in the Manufacturing sector. Production Operative: Hourly rate: £15.05 per hour. Overtime paid at time & half. Basic 34.5 hours per week. Hours of Work: Friday, Saturday & Sunday. 07.00 - 19.00. Safe and efficient operation of production machinery and assembly of customer products. Candidate must be Health/Safety aware and conform to all H/S Procedures, be able to follow Instruction and Ideally come from a manufacturing background Mixing Powders Pressing Powders Operation of Sintering Furnaces and Ovens Brass and Paint Spraying Product Testing and Recording Assembly of Components and Discs to Finished Products Some training will be expected to be required. They require a Production Operative with a minimum 2 years experience. Hours of work: You will need to work Friday, Saturday & Sunday each week. As above: 12 hour shifts. What they are looking for in candidates: Qualifications / Skills/ Experience: Someone who has experience with standard operating procedures in a Manufacturing environment. Salary / Hourly Rates: £15.05 per hour x 34.5 Hours. How to apply for the role: Send your CV in the first instance. Ambitek is a specialist recruiter in Manufacturing, Production and the Engineering sectors. We recruit for blue collar and white-collar roles, covering a variety of roles from cnc machinists, Welders, Platers, Fitters, Maintenance engineers, Inspectors, Mechanical fitters, Sheet Metal Workers through to Sales Engineers, Design Engineers, Production and Planning roles and management positions. If this role does not suite, please get in touch and we may be able to find something suitable. Please note that if you have applied for a role but do not meet the criteria outlined above, we will not be able to take your cv forward to the next stage and due to the volume of applicants we may not be able to respond to all applicants. If you haven t heard from us within 48 hours you will have been unsuccessful.
Role: Fabricator, 12 Months Fixed Term Rate: Up to 37.60 plus regular overtime and monthly bonuses Fabricator's, are you looking to work in a fantastic, modern environment? Great rates of pay and long term stability? You can grow your skills as we place you on an assignment into Caterpillar Articulated Trucks, Peterlee in a challenging and quality driven manufacturing environment. Caterpillar Peterlee is the worldwide source of Cat Articulated Trucks, currently producing 7 variants used in many industries including mining, construction and aggregates. The facility's manufacturing activities use the latest computer analysis techniques, robotic technology and a state-of-the-art paint plant. The facility is easily accessible via bus, car and train and is located just off the A19. The nearest bus stop is just outside of the facility and the nearest train station is located at Horden, which is just a 9 minute drive away from the site. With routes from Newcastle, Sunderland, Hartlepool, Durham and Seaham! With plenty of overtime work available throughout the week and during the weekends, you have the opportunity to maximise your earnings on an overtime rate which is paid at time and a half Monday to Saturday and double time on a Sunday. Benefits: Easily accessible via public transport Free on-site parking/ bike-sheds Free tea and coffee Paid holiday (inc. public Hols) 1 Additional holiday every 2 years added to allowance for service (max 5) Monthly performance lead bonus including attendance bonus to boost your earnings! Regular performance review schemes so you'll know when you're doing a great job Full induction and ongoing training Potential to be made permanent with our client Pay Rate and Working Hours: 36.5 hours per week 18.80 per hour day shift 22.56 per hour afternoon shift 25.38 per hour night shift 28.20 per hour overtime Monday to Saturday 37.60 per hour overtime Sundays Shifts: Days: Monday - Thursday, 08:00 - 16:00. Friday, 08:00 - 12:30 Back shift: Monday - Thursday, 16:00 - 00:00. Friday, 12:30 - 17:00 Night shift: Monday - Thursday, 00:00 - 08:00. Friday, 17:00 - 21:30 About you: Experienced with working on build/welding fixtures to tight tolerances Have the ability to work under own initiative as well as part of a team Be accustomed to modern practices e.g. following a standard work procedure Carry out some manual lifting Work with a sense and awareness of safety at all times Previous experience Relevant NVQ Level 3 Application process: Applicants will need to pass a skills test Please be aware that PPE is mandatory on the factory floor. This will include ear defenders, overalls and safety boots and will be supplied to you. Previous applicants are welcome to reapply, successful applicants will be contacted. Due to the volume of applications we receive, if you haven't heard back from us within 2 weeks please assume you have been unsuccessful on this occasion. "We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age".
Jul 24, 2025
Seasonal
Role: Fabricator, 12 Months Fixed Term Rate: Up to 37.60 plus regular overtime and monthly bonuses Fabricator's, are you looking to work in a fantastic, modern environment? Great rates of pay and long term stability? You can grow your skills as we place you on an assignment into Caterpillar Articulated Trucks, Peterlee in a challenging and quality driven manufacturing environment. Caterpillar Peterlee is the worldwide source of Cat Articulated Trucks, currently producing 7 variants used in many industries including mining, construction and aggregates. The facility's manufacturing activities use the latest computer analysis techniques, robotic technology and a state-of-the-art paint plant. The facility is easily accessible via bus, car and train and is located just off the A19. The nearest bus stop is just outside of the facility and the nearest train station is located at Horden, which is just a 9 minute drive away from the site. With routes from Newcastle, Sunderland, Hartlepool, Durham and Seaham! With plenty of overtime work available throughout the week and during the weekends, you have the opportunity to maximise your earnings on an overtime rate which is paid at time and a half Monday to Saturday and double time on a Sunday. Benefits: Easily accessible via public transport Free on-site parking/ bike-sheds Free tea and coffee Paid holiday (inc. public Hols) 1 Additional holiday every 2 years added to allowance for service (max 5) Monthly performance lead bonus including attendance bonus to boost your earnings! Regular performance review schemes so you'll know when you're doing a great job Full induction and ongoing training Potential to be made permanent with our client Pay Rate and Working Hours: 36.5 hours per week 18.80 per hour day shift 22.56 per hour afternoon shift 25.38 per hour night shift 28.20 per hour overtime Monday to Saturday 37.60 per hour overtime Sundays Shifts: Days: Monday - Thursday, 08:00 - 16:00. Friday, 08:00 - 12:30 Back shift: Monday - Thursday, 16:00 - 00:00. Friday, 12:30 - 17:00 Night shift: Monday - Thursday, 00:00 - 08:00. Friday, 17:00 - 21:30 About you: Experienced with working on build/welding fixtures to tight tolerances Have the ability to work under own initiative as well as part of a team Be accustomed to modern practices e.g. following a standard work procedure Carry out some manual lifting Work with a sense and awareness of safety at all times Previous experience Relevant NVQ Level 3 Application process: Applicants will need to pass a skills test Please be aware that PPE is mandatory on the factory floor. This will include ear defenders, overalls and safety boots and will be supplied to you. Previous applicants are welcome to reapply, successful applicants will be contacted. Due to the volume of applications we receive, if you haven't heard back from us within 2 weeks please assume you have been unsuccessful on this occasion. "We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age".
Paisley Site Services currently have an exciting new opportunity for a Plater to join our manufacturing client in Stockton-on-Tees. 20.26 Per hour with overtime available at 1.5x and 2x on a Sunday. Monday - Thursday (Apply online only) & Friday (Apply online only). Position To undertake the fabrication of pressure vessels and heat exchangers of various diameters and thickness up to 80mm Carry out fabrication on pipework as per engineering drawings with tight tolerances To undertake work utilizing different materials including titanium, CuNi, stainless steel, duplex, super duplex and carbon steel Responsible for stripping and re-assembly of heat exchangers and pipework for maintenance Carry out general workshop day to days tasks as and when required Adhere to all workshop HSE and quality procedures To undertake work independently and as part of the team Requirements Time served with a Level 3 qualification in welding and fabrication Experience with vessels or structural is essential Experience working in a medium to heavy fabrication background Be able to interpret and read engineering drawings with a good understanding Demonstrate an excellent attitude towards company HSE and Quality Forklift truck and overhead crane qualification preferred but not essential
Jul 23, 2025
Contractor
Paisley Site Services currently have an exciting new opportunity for a Plater to join our manufacturing client in Stockton-on-Tees. 20.26 Per hour with overtime available at 1.5x and 2x on a Sunday. Monday - Thursday (Apply online only) & Friday (Apply online only). Position To undertake the fabrication of pressure vessels and heat exchangers of various diameters and thickness up to 80mm Carry out fabrication on pipework as per engineering drawings with tight tolerances To undertake work utilizing different materials including titanium, CuNi, stainless steel, duplex, super duplex and carbon steel Responsible for stripping and re-assembly of heat exchangers and pipework for maintenance Carry out general workshop day to days tasks as and when required Adhere to all workshop HSE and quality procedures To undertake work independently and as part of the team Requirements Time served with a Level 3 qualification in welding and fabrication Experience with vessels or structural is essential Experience working in a medium to heavy fabrication background Be able to interpret and read engineering drawings with a good understanding Demonstrate an excellent attitude towards company HSE and Quality Forklift truck and overhead crane qualification preferred but not essential
Plater Newcastle upon Tyne, Tyne & Wear Up to 19.66 per hour Depending on experience (Overtime available) An opportunity to join an exciting organisation as a Plater. The purpose of the role is to build fabrications from engineering drawings to correct specifications, tolerances and quality. Main Duties & Responsibilities: Perform all duties in line with health, safety and environment regulations and company policies and procedures. Build a variety of fabrications of varying sizes, thickness and material. Will be following engineering drawings / schematics. Assemble parts into large semi-complex fabrications ready for welding in accordance with technical drawings. Work with a minimum of supervision to required standards. Mark out layouts to aid fabrication sequence. Operate guillotines and burning equipment such as oxyacetylene. Train and mentor apprentices. Operate fabrication machine tools and welding equipment. Maintain exemplary housekeeping within designated work area. Qualifications, Skills and Experience: Minimum of 1 years of experience in a plater role Experience of working in a workshop environment. Must have worked in a heavy engineering background. Competitive remuneration package offered. Up to 19.66 per hour depending on experience (Additional overtime available) Salary negotiable and dependent on experience. If you feel that you have the necessary skills and experience, we would like to hear from you.
Jul 23, 2025
Full time
Plater Newcastle upon Tyne, Tyne & Wear Up to 19.66 per hour Depending on experience (Overtime available) An opportunity to join an exciting organisation as a Plater. The purpose of the role is to build fabrications from engineering drawings to correct specifications, tolerances and quality. Main Duties & Responsibilities: Perform all duties in line with health, safety and environment regulations and company policies and procedures. Build a variety of fabrications of varying sizes, thickness and material. Will be following engineering drawings / schematics. Assemble parts into large semi-complex fabrications ready for welding in accordance with technical drawings. Work with a minimum of supervision to required standards. Mark out layouts to aid fabrication sequence. Operate guillotines and burning equipment such as oxyacetylene. Train and mentor apprentices. Operate fabrication machine tools and welding equipment. Maintain exemplary housekeeping within designated work area. Qualifications, Skills and Experience: Minimum of 1 years of experience in a plater role Experience of working in a workshop environment. Must have worked in a heavy engineering background. Competitive remuneration package offered. Up to 19.66 per hour depending on experience (Additional overtime available) Salary negotiable and dependent on experience. If you feel that you have the necessary skills and experience, we would like to hear from you.
If you're looking for a job working as a Fabrication Fitter, we're guessing that one of the critical things you will be looking for is job security. With the Government just announcing a 16 billion investment in defence, for job security, it's an industry that you definitely should consider. Our client is one of the oldest and most successful Defence manufacturing businesses in the North West. They have a long track record of engineering excellence, and we are proud to have worked with them for over 20 years. What do we need from you? To be considered for the role of Fabrication Fitter/Plater, it is essential that you have completed a recognised apprenticeship or have Fabrication & Welding qualifications. Experience working on a variety of different fabrications in steel and aluminium would be highly beneficial to your application. This role will be in high demand, so DON'T MISS OUT. Contract OR Permanent Positions available 37 hours = 22.33 per hour Overtime 1 = 27.96 per hour Overtime 2 = 31.46 per hour Overtime 3 = 41.94 per hour Get your application in today by hitting "apply now" on this advert, sending a full CV via email to (url removed) or calling us on (phone number removed).
Jul 23, 2025
Full time
If you're looking for a job working as a Fabrication Fitter, we're guessing that one of the critical things you will be looking for is job security. With the Government just announcing a 16 billion investment in defence, for job security, it's an industry that you definitely should consider. Our client is one of the oldest and most successful Defence manufacturing businesses in the North West. They have a long track record of engineering excellence, and we are proud to have worked with them for over 20 years. What do we need from you? To be considered for the role of Fabrication Fitter/Plater, it is essential that you have completed a recognised apprenticeship or have Fabrication & Welding qualifications. Experience working on a variety of different fabrications in steel and aluminium would be highly beneficial to your application. This role will be in high demand, so DON'T MISS OUT. Contract OR Permanent Positions available 37 hours = 22.33 per hour Overtime 1 = 27.96 per hour Overtime 2 = 31.46 per hour Overtime 3 = 41.94 per hour Get your application in today by hitting "apply now" on this advert, sending a full CV via email to (url removed) or calling us on (phone number removed).
Fabricator/Welder (Plater) Location : Beith, KA15 1LY Salary : From £15.00 per hour (DOE) Contract : Full-time, Permanent Hours : 40 hours per week (Monday to Friday) Benefits : • Company Pension • Free on-site Parking • Stability within a permanent, full-time role • Work with a respected local employer in a growing engineering business About Us At Burnhouse Engineering, we re proud of our reputation for quality craftsmanship and reliable delivery. Specialising in precision metalwork and structural steel fabrication, we work across sectors including construction, agriculture, and energy. Based in Beith, our modern facilities and skilled team are key to our success! We re looking for an experienced Fabricator Welder Plater to join our team! The Opportunity If you're confident reading engineering drawings, fabricating components to tight tolerances, and welding to high standards, we want to hear from you. Key Responsibilities • Read and interpret technical engineering drawings • Fabricate and assemble structural steel and metal components • Perform MIG welding (TIG and Stick advantageous) • Use tools including grinders, plasma cutters, and burning torches • Plate work: marking out, rolling, bending, and fitting • Carry out dimensional checks for accuracy • Maintain a safe, clean, and organised working environment • Follow all site health & safety policies and procedures What We're Looking For Essential: • 4+ years' experience in fabrication/welding • Skilled in MIG welding • Confident reading engineering drawings • Comfortable working with mild steel (experience with stainless/aluminium a bonus) • Experience using fabrication workshop machinery (press brake, guillotine, rollers, etc.) • Strong attention to detail and a problem-solving mindset Desirable: • TIG or Stick welding experience • Forklift licence (B1) • CSCS or equivalent site certification • Driving licence (for site work flexibility) How to Apply If you're an experienced Fabricator Welder Plater looking for a stable, full-time role with a company that values craftsmanship and quality, we d love to hear from you. Apply now with your up-to-date CV. No agencies please.
Jul 22, 2025
Full time
Fabricator/Welder (Plater) Location : Beith, KA15 1LY Salary : From £15.00 per hour (DOE) Contract : Full-time, Permanent Hours : 40 hours per week (Monday to Friday) Benefits : • Company Pension • Free on-site Parking • Stability within a permanent, full-time role • Work with a respected local employer in a growing engineering business About Us At Burnhouse Engineering, we re proud of our reputation for quality craftsmanship and reliable delivery. Specialising in precision metalwork and structural steel fabrication, we work across sectors including construction, agriculture, and energy. Based in Beith, our modern facilities and skilled team are key to our success! We re looking for an experienced Fabricator Welder Plater to join our team! The Opportunity If you're confident reading engineering drawings, fabricating components to tight tolerances, and welding to high standards, we want to hear from you. Key Responsibilities • Read and interpret technical engineering drawings • Fabricate and assemble structural steel and metal components • Perform MIG welding (TIG and Stick advantageous) • Use tools including grinders, plasma cutters, and burning torches • Plate work: marking out, rolling, bending, and fitting • Carry out dimensional checks for accuracy • Maintain a safe, clean, and organised working environment • Follow all site health & safety policies and procedures What We're Looking For Essential: • 4+ years' experience in fabrication/welding • Skilled in MIG welding • Confident reading engineering drawings • Comfortable working with mild steel (experience with stainless/aluminium a bonus) • Experience using fabrication workshop machinery (press brake, guillotine, rollers, etc.) • Strong attention to detail and a problem-solving mindset Desirable: • TIG or Stick welding experience • Forklift licence (B1) • CSCS or equivalent site certification • Driving licence (for site work flexibility) How to Apply If you're an experienced Fabricator Welder Plater looking for a stable, full-time role with a company that values craftsmanship and quality, we d love to hear from you. Apply now with your up-to-date CV. No agencies please.
Plater (x3) - NVQ Level 3 - Immediate Start - Royston - NAECI Grade 5 Description: We are recruiting 3x skilled Platers in Royston, working under NAECI conditions with excellent rates, bonuses, and long-term opportunity. Role: Location: Royston Start Date: Immediate Duration: Through to end of 2025 (approx click apply for full job details
Jul 15, 2025
Contractor
Plater (x3) - NVQ Level 3 - Immediate Start - Royston - NAECI Grade 5 Description: We are recruiting 3x skilled Platers in Royston, working under NAECI conditions with excellent rates, bonuses, and long-term opportunity. Role: Location: Royston Start Date: Immediate Duration: Through to end of 2025 (approx click apply for full job details
Plater (x3) - NVQ Level 3 - Immediate Start - Royston - NAECI Grade 5 Description: We are recruiting 3x skilled Platers in Royston, working under NAECI conditions with excellent rates, bonuses, and long-term opportunity. Role: Location: Royston Start Date: Immediate Duration: Through to end of 2025 (approx click apply for full job details
Jul 12, 2025
Contractor
Plater (x3) - NVQ Level 3 - Immediate Start - Royston - NAECI Grade 5 Description: We are recruiting 3x skilled Platers in Royston, working under NAECI conditions with excellent rates, bonuses, and long-term opportunity. Role: Location: Royston Start Date: Immediate Duration: Through to end of 2025 (approx click apply for full job details
Job Title: MIG Welder Days (7am start) Location: Nottingham Job Type: Full Time / Temp to Perm / Onsite Pay: Up to £15.50 per hour The company A engineering company that specialises in designing and manufacturing products for the construction sector. They are looking for platers / fabricators to join their team working on current projects click apply for full job details
Jul 09, 2025
Full time
Job Title: MIG Welder Days (7am start) Location: Nottingham Job Type: Full Time / Temp to Perm / Onsite Pay: Up to £15.50 per hour The company A engineering company that specialises in designing and manufacturing products for the construction sector. They are looking for platers / fabricators to join their team working on current projects click apply for full job details
Are you an experienced Heavy Plater looking for stability and long-term work? Our Client in Sheffield is expanding its workforce due to high demand and a continuous flow of projects. We are offering a Temp-to-Perm opportunity, where after 12 weeks, you will transition onto the company's books as a permanent team member. What's on Offer? Ample Overtime - Plenty of extra hours available, after 8 hours click apply for full job details
Mar 13, 2025
Full time
Are you an experienced Heavy Plater looking for stability and long-term work? Our Client in Sheffield is expanding its workforce due to high demand and a continuous flow of projects. We are offering a Temp-to-Perm opportunity, where after 12 weeks, you will transition onto the company's books as a permanent team member. What's on Offer? Ample Overtime - Plenty of extra hours available, after 8 hours click apply for full job details
MIG Welder Vacancy Our client are a well respected engineering firm with a good name in there industry they are currently looking to recruit a MIG welding to join the team MIG Welder Job Requirements MIG Welding structural steel Experience of using overhead cranes Able to read engineering You must be able to do a multi run fillet and a butt weld You must have welded very heavy gauge up to 45 ton beams Apprentice trained MIG Welders MIG Welder Hours and Pay Details The role is available on days Pay is £17.37 Hours of work: Days: 07.00 - 16.45 Monday to Thursday. Contract on offer The role is perm from day one Ways to apply If you wish to apply for this vacancy of MIG Welder please send your cv in word format Further Info Ambitek recruiters regularly for various roles including CNC miller, CNC Turners, Welders, Fabricators, FLT Driver, Maintenance engineers if you feel this role doesn t match but are looking for a new role get in touch.
Mar 08, 2025
Full time
MIG Welder Vacancy Our client are a well respected engineering firm with a good name in there industry they are currently looking to recruit a MIG welding to join the team MIG Welder Job Requirements MIG Welding structural steel Experience of using overhead cranes Able to read engineering You must be able to do a multi run fillet and a butt weld You must have welded very heavy gauge up to 45 ton beams Apprentice trained MIG Welders MIG Welder Hours and Pay Details The role is available on days Pay is £17.37 Hours of work: Days: 07.00 - 16.45 Monday to Thursday. Contract on offer The role is perm from day one Ways to apply If you wish to apply for this vacancy of MIG Welder please send your cv in word format Further Info Ambitek recruiters regularly for various roles including CNC miller, CNC Turners, Welders, Fabricators, FLT Driver, Maintenance engineers if you feel this role doesn t match but are looking for a new role get in touch.
WB Power Services Ltd
Loughborough, Leicestershire
Sheet Metal Fabricator Wiltech Acoustics is proudly part of The Wilmott Group and is a leading generator specialist that provides solutions, maintenance, sales and hire to customers across the UK. This is a superb opportunity for a Metal Sheet Fabricator to join the business through this rapid period of growth. The business is looking for a driven and motivated Metal Sheet Plater to support the tea click apply for full job details
Mar 07, 2025
Full time
Sheet Metal Fabricator Wiltech Acoustics is proudly part of The Wilmott Group and is a leading generator specialist that provides solutions, maintenance, sales and hire to customers across the UK. This is a superb opportunity for a Metal Sheet Fabricator to join the business through this rapid period of growth. The business is looking for a driven and motivated Metal Sheet Plater to support the tea click apply for full job details
Job Title: Plater Fabricator Location: Portsmouth Naval Base Salary: £34,640 plus overtime and shift allowance Who we are: Working for a world recognised defence organisation - refit and maintenance of all serving vessels. Such as QEC and Type 45 Destroyers. This team is responsible for the constructive aspects of the maintenance, e.g. new components and structural repairs, of the British Naval Fleet. As the world has evolved, so has the way we work. Our working approach, will enable you to have flexibility with your working hours, depending on your role and location. This could include accruing hours as well as flexibility around start and finish times, ensuring you can balance life at work, on site and life at home. What you'll be doing: To be trade competent, measured at a minimum of 60% skilled against MS_ Constructive competencies Carry out a Trade specific point of work risk assessment before every task, detailed by Team Leader Abide by all Risk Assessments, BAE polices and the law Ensure all tools and equipment that are used are suitable, fit for purpose and in date for any inspection required Attend all training courses, Tool Box Talks and briefings where possible Develop and maintain positive relationships with customers, managing their expectations and needs. Mentoring allocated apprentices Report all accidents, incidents and near misses via the appropriate reporting tool Your skills and experiences: Have completed an appropriate trade apprenticeship, naval equivalent qualifications, or qualifications (NVQ in Trade) Experience in fabrication Be competent in using a wide range of hand tools and equipment Relevant Industry Experience - Marine, Oil & Gas, Heavy Construction, Rolling Stock Ability to work at heights and confined spaces What we offer: As well as a competitive salary of £34,640 plus overtime and shift allowance, BAE Systems also offers a number of benefits including: Pension Employee share plans, green car scheme Private health plans Shopping discounts Annual incentive We want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition that may affect your performance in the recruitment process, please speak to us about any adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 4th April 2025
Mar 06, 2025
Full time
Job Title: Plater Fabricator Location: Portsmouth Naval Base Salary: £34,640 plus overtime and shift allowance Who we are: Working for a world recognised defence organisation - refit and maintenance of all serving vessels. Such as QEC and Type 45 Destroyers. This team is responsible for the constructive aspects of the maintenance, e.g. new components and structural repairs, of the British Naval Fleet. As the world has evolved, so has the way we work. Our working approach, will enable you to have flexibility with your working hours, depending on your role and location. This could include accruing hours as well as flexibility around start and finish times, ensuring you can balance life at work, on site and life at home. What you'll be doing: To be trade competent, measured at a minimum of 60% skilled against MS_ Constructive competencies Carry out a Trade specific point of work risk assessment before every task, detailed by Team Leader Abide by all Risk Assessments, BAE polices and the law Ensure all tools and equipment that are used are suitable, fit for purpose and in date for any inspection required Attend all training courses, Tool Box Talks and briefings where possible Develop and maintain positive relationships with customers, managing their expectations and needs. Mentoring allocated apprentices Report all accidents, incidents and near misses via the appropriate reporting tool Your skills and experiences: Have completed an appropriate trade apprenticeship, naval equivalent qualifications, or qualifications (NVQ in Trade) Experience in fabrication Be competent in using a wide range of hand tools and equipment Relevant Industry Experience - Marine, Oil & Gas, Heavy Construction, Rolling Stock Ability to work at heights and confined spaces What we offer: As well as a competitive salary of £34,640 plus overtime and shift allowance, BAE Systems also offers a number of benefits including: Pension Employee share plans, green car scheme Private health plans Shopping discounts Annual incentive We want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition that may affect your performance in the recruitment process, please speak to us about any adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 4th April 2025
Job Title: Plater Fabricator Location: Portsmouth Naval Base Salary: £34,640 plus overtime and shift allowance Who we are: Working for a world recognised defence organisation - refit and maintenance of all serving vessels. Such as QEC and Type 45 Destroyers. This team is responsible for the constructive aspects of the maintenance, e.g. new components and structural repairs, of the British Naval Fleet. As the world has evolved, so has the way we work. Our working approach, will enable you to have flexibility with your working hours, depending on your role and location. This could include accruing hours as well as flexibility around start and finish times, ensuring you can balance life at work, on site and life at home. What you'll be doing: To be trade competent, measured at a minimum of 60% skilled against MS_ Constructive competencies Carry out a Trade specific point of work risk assessment before every task, detailed by Team Leader Abide by all Risk Assessments, BAE polices and the law Ensure all tools and equipment that are used are suitable, fit for purpose and in date for any inspection required Attend all training courses, Tool Box Talks and briefings where possible Develop and maintain positive relationships with customers, managing their expectations and needs. Mentoring allocated apprentices Report all accidents, incidents and near misses via the appropriate reporting tool Your skills and experiences: Have completed an appropriate trade apprenticeship, naval equivalent qualifications, or qualifications (NVQ in Trade) Experience in fabrication Be competent in using a wide range of hand tools and equipment Relevant Industry Experience - Marine, Oil & Gas, Heavy Construction, Rolling Stock Ability to work at heights and confined spaces What we offer: As well as a competitive salary of £34,640 plus overtime and shift allowance, BAE Systems also offers a number of benefits including: Pension Employee share plans, green car scheme Private health plans Shopping discounts Annual incentive We want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition that may affect your performance in the recruitment process, please speak to us about any adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 4th April 2025
Mar 06, 2025
Full time
Job Title: Plater Fabricator Location: Portsmouth Naval Base Salary: £34,640 plus overtime and shift allowance Who we are: Working for a world recognised defence organisation - refit and maintenance of all serving vessels. Such as QEC and Type 45 Destroyers. This team is responsible for the constructive aspects of the maintenance, e.g. new components and structural repairs, of the British Naval Fleet. As the world has evolved, so has the way we work. Our working approach, will enable you to have flexibility with your working hours, depending on your role and location. This could include accruing hours as well as flexibility around start and finish times, ensuring you can balance life at work, on site and life at home. What you'll be doing: To be trade competent, measured at a minimum of 60% skilled against MS_ Constructive competencies Carry out a Trade specific point of work risk assessment before every task, detailed by Team Leader Abide by all Risk Assessments, BAE polices and the law Ensure all tools and equipment that are used are suitable, fit for purpose and in date for any inspection required Attend all training courses, Tool Box Talks and briefings where possible Develop and maintain positive relationships with customers, managing their expectations and needs. Mentoring allocated apprentices Report all accidents, incidents and near misses via the appropriate reporting tool Your skills and experiences: Have completed an appropriate trade apprenticeship, naval equivalent qualifications, or qualifications (NVQ in Trade) Experience in fabrication Be competent in using a wide range of hand tools and equipment Relevant Industry Experience - Marine, Oil & Gas, Heavy Construction, Rolling Stock Ability to work at heights and confined spaces What we offer: As well as a competitive salary of £34,640 plus overtime and shift allowance, BAE Systems also offers a number of benefits including: Pension Employee share plans, green car scheme Private health plans Shopping discounts Annual incentive We want to make sure that our recruitment processes are as inclusive as possible. If you have a disability or health condition that may affect your performance in the recruitment process, please speak to us about any adjustments. Please be aware that many roles at BAE Systems are subject to both security and export control restrictions. These restrictions mean that factors such as your nationality, any nationalities you may have previously held, and your place of birth can restrict the roles you are eligible to perform within the organisation. All applicants must as a minimum achieve Baseline Personnel Security Standard. Many roles also require higher levels of National Security Vetting where applicants must typically have 5 to 10 years of continuous residency in the UK depending on the vetting level required for the role, to allow for meaningful security vetting checks. Closing Date: 4th April 2025
