49 jobs found

Job Role: Combustion engineer Location: HMP Wayland Salary: 41,818.21 Contract: Full time/Perm We are seeking a dedicated Engineer - Combustion to join our team at a HMP Wayland, a Category C & male prison. Join a team that is more than just a group of colleagues - we work Monday-Sunday as a supportive and driven family, working together to create a safe and nurturing environment. HMP Wayland runs like a self-contained Town it takes hundreds of people to keep it functioning, and as the Facilities Maintenance Team we are committed and driving the smooth and safe operation, like a heart that pumps blood through the body, everything we do impacts every prisoner, employee, and visitor, and wider to the families and community. As a Engineer - Combustion you will have the opportunity to work alongside experienced and passionate colleagues who vary from Plumbers, Electricians, Carpenters, Painters, to Cleaners, and Administrators, and others, who are all dedicated to making a positive difference, providing a safe and secure environment for all. If you are looking for a role where you can use your skills to create a better future for others, we encourage you to apply for this compelling opportunity and join us in our mission to promote rehabilitation and positive change and be part of a team that truly makes a difference. We are a Ministry of Justice business and provide critical and time-bound services to HMPPS, and are looking for a Engineer - Combustion with any combination of: - Two years experience working in a role as a heating engineer, a combustion engineer or equivalent - Must be familiar with and able to work to Water Supply Regulation and Control of Legionella L8 requirements - Must be familiar with and able to work to Gas safe (installation and use) regulations 1998 and associated industry Standards - Experience of working with commercial catering gas appliances would be beneficia - Plumber qualified to C&G 6035 (Plumbing), C&G 6189 (Plumbing and heating) and NVQ level 3 in Plumbing or equivalent - CCN1 - Core domestic gas safety and relevant domestic appliance units - COCN1 - Core commercial gas safety certificate and relevant commercial units - Good Health & Safety knowledge. - Excellent organisational, time management and people skills. If this sounds like you, we would like to hear from you! Explore a varied and rewarding career at GFSL. Welcome to careers at Gov Facilities Services Limited (GFSL). Joining us is your chance to help ensure prisons are secure and safe for prisoners and prison staff alike, and to play your part in helping prisoners reintegrate into society. Holidays are 25 days per year plus Bank Holidays, and a range of non-contractual benefits are provided. These range from Death in Service at 4x salary, to access to private GP consultations and an Employee Assistance Programme that offers counselling and information services for preventative care and to help employees in a crisis. There are also a range of financial reward mechanisms and access to retailer discounts. You will find a strong focus on safety, a supportive, inclusive workplace, a competitive benefits package, and real opportunity to build your skills and progress. Explore facilities careers where you can make difference. Pride In People. We're passionate about promoting greater diversity and creating a workplace and culture where all of our employees have a voice that is heard, feel a sense of belonging and are empowered to be their true selves. We recognise the value that every single employee brings to the organisation. Everyone's needs at work are different and we are committed to doing our best to satisfy these differences whilst ensuring consistency and fairness for all. We promise to champion diversity and inclusion with ongoing learning and training, as well as career progression opportunities for everyone. GFSL has been notified by its shareholder (MOJ) that the provision of FM services will in future be delivered by the private sector. This means that following a successful procurement process, GFSL's services will transfer to a private sector provider/providers in Autumn 2026. As the programme unfolds, we will learn more. Pride in People - Do the Right thing - One Team An ISO 9001 Certified Company

Our client has a permanent opportunity for a Scientific Product Specialist. They provide automation and fluid control solutions for factory and laboratory applications. This is a National role, working remotely, with travel required. As a key member of their talented and successful products team this is an interesting, varied, and challenging customer-facing role that is designed to support increase their market share. Working closely with the field sales team you will provide application, product knowledge and sale support during customer visits. The range of product focus include chillers, heat exchangers, sensors, media separated valves, clean wet pumps, and process gas controls. To be considered you will need to demonstrate customer facing technical and sales experience. Key Responsibilities: Maintain accurate records of activities using our CRM system Grow sales of the product range through supporting the salesforce and their customers Understand and have the ability to use the value proposition of the product range responsible for and business value to grow sales. Identifying, researching, and gaining application knowledge for new opportunities for the product Promote the product range responsible for by creating marketing material, training material, and identifying trade shows where the range will achieve exposure. Develop strong working relationships with internal and external customers consulting with them to solve problems from a technical perspective. Meet and exceed targets. Skills and Experience: Desirable : A degree within a Science or Engineering discipline Required: HND or equivalent or relevant experience Proven track record of selling, specifying, or developing the product range of chillers, heat exchangers, sensors, media separated valves, clean wet pumps and process gas controls. Experience, skills and knowledge of the types of applications found in the non-invasive life science / medical / electronics industry, as these are the types of market areas, you will be working in. Demonstrate an ability to communicate and influence effectively at all levels of the business. Highly driven and passionate about making a difference within the industry. Proven track record of using value propositions to ensure customer satisfaction, increasing retention and customer loyalty to a brand. Full UK Driving Licence Current passport as European travel may be required. Due to the large number of responses we receive it is not always possible to respond to every application straight away. Should your skills and experience be a match for this role, or any other vacancy we may have, we will normally contact you within 72 hours of receiving your application. If you wish to apply for further roles please do so.

Our client has a permanent opportunity for a Scientific Product Specialist. They provide automation and fluid control solutions for factory and laboratory applications. This is a National role, working remotely, with travel required. As a key member of their talented and successful products team this is an interesting, varied, and challenging customer-facing role that is designed to support increase their market share. Working closely with the field sales team you will provide application, product knowledge and sale support during customer visits. The range of product focus include chillers, heat exchangers, sensors, media separated valves, clean wet pumps, and process gas controls. To be considered you will need to demonstrate customer facing technical and sales experience. Key Responsibilities: Maintain accurate records of activities using our CRM system Grow sales of the product range through supporting the salesforce and their customers Understand and have the ability to use the value proposition of the product range responsible for and business value to grow sales. Identifying, researching, and gaining application knowledge for new opportunities for the product Promote the product range responsible for by creating marketing material, training material, and identifying trade shows where the range will achieve exposure. Develop strong working relationships with internal and external customers consulting with them to solve problems from a technical perspective. Meet and exceed targets. Skills and Experience: Desirable : A degree within a Science or Engineering discipline Required: HND or equivalent or relevant experience Proven track record of selling, specifying, or developing the product range of chillers, heat exchangers, sensors, media separated valves, clean wet pumps and process gas controls. Experience, skills and knowledge of the types of applications found in the non-invasive life science / medical / electronics industry, as these are the types of market areas, you will be working in. Demonstrate an ability to communicate and influence effectively at all levels of the business. Highly driven and passionate about making a difference within the industry. Proven track record of using value propositions to ensure customer satisfaction, increasing retention and customer loyalty to a brand. Full UK Driving Licence Current passport as European travel may be required. Due to the large number of responses we receive it is not always possible to respond to every application straight away. Should your skills and experience be a match for this role, or any other vacancy we may have, we will normally contact you within 72 hours of receiving your application. If you wish to apply for further roles please do so.

Our client has a permanent opportunity for a Scientific Product Specialist. They provide automation and fluid control solutions for factory and laboratory applications. This is a National role, working remotely, with travel required. As a key member of their talented and successful products team this is an interesting, varied, and challenging customer-facing role that is designed to support increase their market share. Working closely with the field sales team you will provide application, product knowledge and sale support during customer visits. The range of product focus include chillers, heat exchangers, sensors, media separated valves, clean wet pumps, and process gas controls. To be considered you will need to demonstrate customer facing technical and sales experience. Key Responsibilities: Maintain accurate records of activities using our CRM system Grow sales of the product range through supporting the salesforce and their customers Understand and have the ability to use the value proposition of the product range responsible for and business value to grow sales. Identifying, researching, and gaining application knowledge for new opportunities for the product Promote the product range responsible for by creating marketing material, training material, and identifying trade shows where the range will achieve exposure. Develop strong working relationships with internal and external customers consulting with them to solve problems from a technical perspective. Meet and exceed targets. Skills and Experience: Desirable : A degree within a Science or Engineering discipline Required: HND or equivalent or relevant experience Proven track record of selling, specifying, or developing the product range of chillers, heat exchangers, sensors, media separated valves, clean wet pumps and process gas controls. Experience, skills and knowledge of the types of applications found in the non-invasive life science / medical / electronics industry, as these are the types of market areas, you will be working in. Demonstrate an ability to communicate and influence effectively at all levels of the business. Highly driven and passionate about making a difference within the industry. Proven track record of using value propositions to ensure customer satisfaction, increasing retention and customer loyalty to a brand. Full UK Driving Licence Current passport as European travel may be required. Due to the large number of responses we receive it is not always possible to respond to every application straight away. Should your skills and experience be a match for this role, or any other vacancy we may have, we will normally contact you within 72 hours of receiving your application. If you wish to apply for further roles please do so.

Our client has a permanent opportunity for a Scientific Product Specialist. They provide automation and fluid control solutions for factory and laboratory applications. This is a National role, working remotely, with travel required. As a key member of their talented and successful products team this is an interesting, varied, and challenging customer-facing role that is designed to support increase their market share. Working closely with the field sales team you will provide application, product knowledge and sale support during customer visits. The range of product focus include chillers, heat exchangers, sensors, media separated valves, clean wet pumps, and process gas controls. To be considered you will need to demonstrate customer facing technical and sales experience. Key Responsibilities: Maintain accurate records of activities using our CRM system Grow sales of the product range through supporting the salesforce and their customers Understand and have the ability to use the value proposition of the product range responsible for and business value to grow sales. Identifying, researching, and gaining application knowledge for new opportunities for the product Promote the product range responsible for by creating marketing material, training material, and identifying trade shows where the range will achieve exposure. Develop strong working relationships with internal and external customers consulting with them to solve problems from a technical perspective. Meet and exceed targets. Skills and Experience: Desirable : A degree within a Science or Engineering discipline Required: HND or equivalent or relevant experience Proven track record of selling, specifying, or developing the product range of chillers, heat exchangers, sensors, media separated valves, clean wet pumps and process gas controls. Experience, skills and knowledge of the types of applications found in the non-invasive life science / medical / electronics industry, as these are the types of market areas, you will be working in. Demonstrate an ability to communicate and influence effectively at all levels of the business. Highly driven and passionate about making a difference within the industry. Proven track record of using value propositions to ensure customer satisfaction, increasing retention and customer loyalty to a brand. Full UK Driving Licence Current passport as European travel may be required. Due to the large number of responses we receive it is not always possible to respond to every application straight away. Should your skills and experience be a match for this role, or any other vacancy we may have, we will normally contact you within 72 hours of receiving your application. If you wish to apply for further roles please do so.

Our client has a permanent opportunity for a Scientific Product Specialist. They provide automation and fluid control solutions for factory and laboratory applications. This is a National role, working remotely, with travel required. As a key member of their talented and successful products team this is an interesting, varied, and challenging customer-facing role that is designed to support increase their market share. Working closely with the field sales team you will provide application, product knowledge and sale support during customer visits. The range of product focus include chillers, heat exchangers, sensors, media separated valves, clean wet pumps, and process gas controls. To be considered you will need to demonstrate customer facing technical and sales experience. Key Responsibilities: Maintain accurate records of activities using our CRM system Grow sales of the product range through supporting the salesforce and their customers Understand and have the ability to use the value proposition of the product range responsible for and business value to grow sales. Identifying, researching, and gaining application knowledge for new opportunities for the product Promote the product range responsible for by creating marketing material, training material, and identifying trade shows where the range will achieve exposure. Develop strong working relationships with internal and external customers consulting with them to solve problems from a technical perspective. Meet and exceed targets. Skills and Experience: Desirable : A degree within a Science or Engineering discipline Required: HND or equivalent or relevant experience Proven track record of selling, specifying, or developing the product range of chillers, heat exchangers, sensors, media separated valves, clean wet pumps and process gas controls. Experience, skills and knowledge of the types of applications found in the non-invasive life science / medical / electronics industry, as these are the types of market areas, you will be working in. Demonstrate an ability to communicate and influence effectively at all levels of the business. Highly driven and passionate about making a difference within the industry. Proven track record of using value propositions to ensure customer satisfaction, increasing retention and customer loyalty to a brand. Full UK Driving Licence Current passport as European travel may be required. Due to the large number of responses we receive it is not always possible to respond to every application straight away. Should your skills and experience be a match for this role, or any other vacancy we may have, we will normally contact you within 72 hours of receiving your application. If you wish to apply for further roles please do so.

Our client has a permanent opportunity for a Scientific Product Specialist. They provide automation and fluid control solutions for factory and laboratory applications. This is a National role, working remotely, with travel required. As a key member of their talented and successful products team this is an interesting, varied, and challenging customer-facing role that is designed to support increase their market share. Working closely with the field sales team you will provide application, product knowledge and sale support during customer visits. The range of product focus include chillers, heat exchangers, sensors, media separated valves, clean wet pumps, and process gas controls. To be considered you will need to demonstrate customer facing technical and sales experience. Key Responsibilities: Maintain accurate records of activities using our CRM system Grow sales of the product range through supporting the salesforce and their customers Understand and have the ability to use the value proposition of the product range responsible for and business value to grow sales. Identifying, researching, and gaining application knowledge for new opportunities for the product Promote the product range responsible for by creating marketing material, training material, and identifying trade shows where the range will achieve exposure. Develop strong working relationships with internal and external customers consulting with them to solve problems from a technical perspective. Meet and exceed targets. Skills and Experience: Desirable : A degree within a Science or Engineering discipline Required: HND or equivalent or relevant experience Proven track record of selling, specifying, or developing the product range of chillers, heat exchangers, sensors, media separated valves, clean wet pumps and process gas controls. Experience, skills and knowledge of the types of applications found in the non-invasive life science / medical / electronics industry, as these are the types of market areas, you will be working in. Demonstrate an ability to communicate and influence effectively at all levels of the business. Highly driven and passionate about making a difference within the industry. Proven track record of using value propositions to ensure customer satisfaction, increasing retention and customer loyalty to a brand. Full UK Driving Licence Current passport as European travel may be required. Due to the large number of responses we receive it is not always possible to respond to every application straight away. Should your skills and experience be a match for this role, or any other vacancy we may have, we will normally contact you within 72 hours of receiving your application. If you wish to apply for further roles please do so.

Our client has a permanent opportunity for a Scientific Product Specialist. They provide automation and fluid control solutions for factory and laboratory applications. This is a National role, working remotely, with travel required. As a key member of their talented and successful products team this is an interesting, varied, and challenging customer-facing role that is designed to support increase their market share. Working closely with the field sales team you will provide application, product knowledge and sale support during customer visits. The range of product focus include chillers, heat exchangers, sensors, media separated valves, clean wet pumps, and process gas controls. To be considered you will need to demonstrate customer facing technical and sales experience. Key Responsibilities: Maintain accurate records of activities using our CRM system Grow sales of the product range through supporting the salesforce and their customers Understand and have the ability to use the value proposition of the product range responsible for and business value to grow sales. Identifying, researching, and gaining application knowledge for new opportunities for the product Promote the product range responsible for by creating marketing material, training material, and identifying trade shows where the range will achieve exposure. Develop strong working relationships with internal and external customers consulting with them to solve problems from a technical perspective. Meet and exceed targets. Skills and Experience: Desirable : A degree within a Science or Engineering discipline Required: HND or equivalent or relevant experience Proven track record of selling, specifying, or developing the product range of chillers, heat exchangers, sensors, media separated valves, clean wet pumps and process gas controls. Experience, skills and knowledge of the types of applications found in the non-invasive life science / medical / electronics industry, as these are the types of market areas, you will be working in. Demonstrate an ability to communicate and influence effectively at all levels of the business. Highly driven and passionate about making a difference within the industry. Proven track record of using value propositions to ensure customer satisfaction, increasing retention and customer loyalty to a brand. Full UK Driving Licence Current passport as European travel may be required. Due to the large number of responses we receive it is not always possible to respond to every application straight away. Should your skills and experience be a match for this role, or any other vacancy we may have, we will normally contact you within 72 hours of receiving your application. If you wish to apply for further roles please do so.

Our client has a permanent opportunity for a Scientific Product Specialist. They provide automation and fluid control solutions for factory and laboratory applications. As a key member of their talented and successful products team this is an interesting, varied, and challenging customer-facing role that is designed to support increase their market share. Working closely with the field sales team you will provide application, product knowledge and sale support during customer visits. The range of product focus include chillers, heat exchangers, sensors, media separated valves, clean wet pumps, and process gas controls. To be considered you will need to demonstrate customer facing technical and sales experience. Key Responsibilities: Maintain accurate records of activities using our CRM system Grow sales of the product range through supporting the salesforce and their customers Understand and have the ability to use the value proposition of the product range responsible for and business value to grow sales. Identifying, researching, and gaining application knowledge for new opportunities for the product range. Promote the product range responsible for by creating marketing material, training material, and identifying trade shows where the range will achieve exposure. Develop strong working relationships with internal and external customers consulting with them to solve problems from a technical perspective. Meet and exceed targets. Skills and Experience: Desirable : A degree within a Science or Engineering discipline Required: HND or equivalent or relevant experience Proven track record of selling, specifying, or developing the product range of chillers, heat exchangers, sensors, media separated valves, clean wet pumps and process gas controls. Experience, skills and knowledge of the types of applications found in the non-invasive life science / medical / electronics industry, as these are the types of market areas, you will be working in. Demonstrate an ability to communicate and influence effectively at all levels of the business. Highly driven and passionate about making a difference within the industry. Proven track record of using value propositions to ensure customer satisfaction, increasing retention and customer loyalty to a brand. Full UK Driving Licence Current passport as European travel may be required. Due to the large number of responses we receive it is not always possible to respond to every application straight away. Should your skills and experience be a match for this role, or any other vacancy we may have, we will normally contact you within 72 hours of receiving your application. If you wish to apply for further roles please do so.

Mobile Air Conditioning Engineer Job Summary: A Mobile Service Engineer to carry out PPM and Reactive Activities in a variety of commercial premises. Candidates will ideally be located in the required area. Applicants will have Commercial Experience and be expected to assist with various reactive and PPM tasks. Some installation work will be expected, although the core part of the role is maintenance. The role is predominantly skillset with an AC bias and a strong multi-skilled background with experience in Building Services. This is a hands-on role and would suit an individual who can work using their own initiative and has a proactive approach to undertake all tasks required. A conscientious and reliable team player with excellent interpersonal and communication skills is essential due to this being a client-facing role. The ability to produce quotes for additional works by obtaining materials costs and writing up a description of the works required is also necessary. What this job involves: To carry out reactive maintenance repairs across various contracts. To assess and order parts and equipment necessary for individual tasks. To work to recognised industry standards at all times. To participate in flexible working hours and out-of-hours emergency cover as required by the contract. To undertake training as required to perform the duties of the role, including health and safety courses and further trade development, to maintain current knowledge and professional qualifications (Continued Professional Development). To assist other trades as/when required. To update/close completed Reactive & PPM tasks on our CAFM System. Ensure engineering standards are maintained in order to maximise efficient operation and reliability of plant. To ensure company QA and site procedures are adhered to in all aspects. To ensure that both Client and Integral's Health and Safety procedures are followed at all times. To inspect the condition of services and proactively deal with call outs/repairs as required and/or requested by management. To attend emergencies, inside and outside of normal working hours. Keep and maintain all company issued tools in a safe and working condition. To undertake any other duties as directed by Managers within the remit of the role. Provide detailed and accurate reports for any remedial works required whilst attending site. Produce technical and situational reports as required. Updating of on-site logbooks for compliance purposes. Electrical testing and completion of any certificates or documentation for works completed. Complete on-site Method Statements and Risk Assessments as necessary. This job description sets out the main duties of the post at the date it was completed. Such duties may vary from time to time without changing the general character of the post or the level of responsibility entailed. AC Specific To carry out works on AC equipment, such as compressor and fan replacement, clear line blockages and replace condense pumps, fault find PCB's and electrical wiring replacing as necessary, repair pipework and complete pressure leak tests, install new splits. To carry out PPM tasks, such as annual servicing, filter and coil cleans, FGAS leak checks, tap temperature testing and flushing, fan coil servicing, functional testing, and visual inspection of equipment. Experience & Qualifications Extensive experience within the trade of service, installation and maintenance of refrigeration and air conditioning systems, VRV, VRF & split systems. Knowledge of Fault finding on AC control systems. NVQ 3 Certificate in Servicing and Maintaining Air-Conditioning and Heat Pump Systems. NVQ 3 Certificate in Installing and Commissioning Air-Conditioning and Heat Pump Systems. NVQ 3 Diploma in Servicing and Maintaining Refrigeration Systems. NVQ 3 Certificate in Installing and Commissioning Refrigeration Systems. C&G 2079 F GAS and ODS Regulations: Category 4. Full UK Driving License. Knowledge of building fabric and experience in carrying out basic fabric reactive repairs when required. Extensive Knowledge of Health & Safety Regulations. Ability to act on own initiative. Smart appearance, presentable. Must be available for call outs. Good written and verbal communication skills. Able to work from a smartphone and PDA. Comfortable working within a team environment. Able to contribute to teams success whilst willingly following instructions. Self-motivated and able to work unsupervised. Adaptable and flexible approach to work requirements, willing to accept change. The candidate will be required to adopt a flexible approach to working hours to suit the needs of the sector. This will require work at weekends and in the evenings. IPAF 3a & 3b. Plasma.

Senior Field Service Engineer - Biomass Heating Systems Location: Inverness, Scotland Hours: Monday - Friday, 7:00 AM - 5:00 PM Salary: Competitive, Depending on Experience Are you an experienced engineer with a background in Commercial Plumbing & Heating or Electrical Installation looking to transition into the Biomass sector? This is a fantastic opportunity to join a leading provider of biomass boiler systems and off-site pre-fabricated MEP solutions, offering full training and career progression in a growing industry. The Role: As a Senior Field Service Engineer, you will be responsible for the planned and reactive maintenance, servicing, and repairs of commercial biomass heating systems across a variety of prestigious Local Authority sites in the Highlands of Scotland. You will work independently to diagnose and resolve issues while ensuring compliance with legislative and contractual obligations. While based out of Inverness, you will typically travel to client sites from your home location daily. Full training in Biomass systems will be provided to help you quickly integrate into the sector. Key Responsibilities: Carry out planned and reactive maintenance on commercial heating systems, including pumps, control valves, pressurisation units, fuel stores, and associated mechanical and electrical services. Diagnose and repair breakdowns efficiently, using your expertise to minimise downtime. Conduct servicing to a high standard, ensuring full compliance with regulations. Maintain accurate records using company-provided tablets and cloud-based asset management software. Deliver excellent customer service, building strong relationships with client representatives on-site. Work collaboratively with internal teams to support seamless operations. Skills & Experience: Essential: SNVQ (or equivalent) in Commercial Plumbing & Heating and/or Electrical Installation . Valid UK Driving License . Minimum of 5 years' experience in a relevant industry. Strong knowledge of mechanical systems, electrical circuits, and heating principles . Excellent problem-solving and diagnostic skills . Desirable: Previous Biomass sector experience. Additional certifications in heating, plumbing, or electrical disciplines. Qualified in Oil/Gas Servicing (OFTEC / Gas Safe Modules) . What's on Offer? Full training & career development opportunities in the growing Biomass sector. Competitive pension scheme & life assurance. Health cash plan, annual flu vaccine & free annual health check. Join a forward-thinking company committed to sustainability, innovation, and employee well-being. If you're looking for a long-term career move with excellent training and benefits, apply today! Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Gas and Oil Boiler Engineer Ipswich and Suffolk coastal areas Full Time hours per week, with overtime and weekend availability Starting from £18.50 per hour, based on experience and qualifications held. Are you a skilled Gas and Oil Boiler Engineer looking for your next career move? Our client is seeking an experienced, self-motivated, and hardworking Engineer to join their team. Our client is a small, family-run business with over 35 years of experience, known for their great company culture and strong team spirit. Employing two generations of engineers, they've built a first-class reputation in their field. This is a long-term role, ideal for those looking to grow with the company, as many of their engineers have been part of the team for years. The company prioritise repeat business and referrals, which is why they only hire Engineers committed to upholding their high standards in customer service. You'll enjoy a variety of work, with additional training provided to help upskill the right candidate. They are based in Ipswich and serve the beautiful Suffolk coastal area and beyond. Are you the right person for the job? At least 3 years of boiler maintenance experience (required) Gas Safe certification (required) OFTEC qualification or good experience with oil (required) Basic wiring knowledge. Confident with all heating system inc. low loss headers and 1 pipe systems. A multi-skilled engineer with installation experience Ability to work independently, showing initiative and a strong work ethic Someone who takes pride in their work and enjoys being part of a great team A full UK driving licence What will your role look like? Servicing and fault-finding on domestic gas and oil boilers Replacing gas and oil-fired boilers Carrying out general plumbing repairs and installations Working on renewable installations including ground source and air source heat pumps (training provided for renewables) Maintaining our high standards of service on quality projects What can you expect in return? Company Van and fuel provided A dedicated member of staff in the office who will support you and book all your jobs and sort out parts etc. Annual staff training days, BBQs and teambuilding days The employer will cover cost to renew professional qualifications/cards and any new training Uniform provided Tools and calibration allowance Paid travel time from the office Flexitime to support work-life balance Company pension Private medical and dental insurance Sick pay/personal injury insurance Profit sharing opportunities On-site parking Regular company events to celebrate our teams successes This is a fantastic opportunity for a skilled engineer to join a respected, family-oriented company that values its employees and offers room for growth. Click APPLY now! Your data will be handled in line with GDPR. JBRP1_UKTJ

Senior Field Service Engineer - Biomass Heating Systems Location: Inverness, Scotland Hours: Monday - Friday, 7:00 AM - 5:00 PM Salary: Competitive, Depending on Experience Are you an experienced engineer with a background in Commercial Plumbing & Heating or Electrical Installation looking to transition into the Biomass sector? This is a fantastic opportunity to join a leading provider of biomass boiler systems and off-site pre-fabricated MEP solutions, offering full training and career progression in a growing industry. The Role: As a Senior Field Service Engineer, you will be responsible for the planned and reactive maintenance, servicing, and repairs of commercial biomass heating systems across a variety of prestigious Local Authority sites in the Highlands of Scotland. You will work independently to diagnose and resolve issues while ensuring compliance with legislative and contractual obligations. While based out of Inverness, you will typically travel to client sites from your home location daily. Full training in Biomass systems will be provided to help you quickly integrate into the sector. Key Responsibilities: Carry out planned and reactive maintenance on commercial heating systems, including pumps, control valves, pressurisation units, fuel stores, and associated mechanical and electrical services. Diagnose and repair breakdowns efficiently, using your expertise to minimise downtime. Conduct servicing to a high standard, ensuring full compliance with regulations. Maintain accurate records using company-provided tablets and cloud-based asset management software. Deliver excellent customer service, building strong relationships with client representatives on-site. Work collaboratively with internal teams to support seamless operations. Skills & Experience: Essential: SNVQ (or equivalent) in Commercial Plumbing & Heating and/or Electrical Installation . Valid UK Driving License . Minimum of 5 years' experience in a relevant industry. Strong knowledge of mechanical systems, electrical circuits, and heating principles . Excellent problem-solving and diagnostic skills . Desirable: Previous Biomass sector experience. Additional certifications in heating, plumbing, or electrical disciplines. Qualified in Oil/Gas Servicing (OFTEC / Gas Safe Modules) . What's on Offer? Full training & career development opportunities in the growing Biomass sector. Competitive pension scheme & life assurance. Health cash plan, annual flu vaccine & free annual health check. Join a forward-thinking company committed to sustainability, innovation, and employee well-being. If you're looking for a long-term career move with excellent training and benefits, apply today! Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Service Engineer (Commercial Gas) Colchester 40,000 - 48,000 + Progression + Training + Established Company + Pension + Private Health Care + Van and Tools Provided + Potential Bonus + London Working Bonus (If you ever go into London) Are you looking for a role within a company with excellent retention, who invest into their staff and have a longstanding reputation within the industry? Do you have an interest in moving into renewables such as heat pumps in the future? This company carry's out planned and reactive maintenance to over 1000 different clients on varied commercial and residential properties, some of which are very prestigious. Due to recent developments with new clients and a large package of planned work for the next six years they are now looking for Commercial Gas Engineers to support the continued growth of their business. You will be working within a supportive team that values it's staff. All of your work will be scheduled for you by the internal operations team and distributed to you via company tablets using state of the art cloud communications technology. You will also have the opportunity to increase you wages with overtime through a flexible call out Rota. The ideal candidate will have current Gas Safe Qualifications to a Commercial Grade working on boilers and pipework and have a high standards for the quality of their work. It will be advantageous to any candidates who also hold relevant Domestic Gas qualifications and experience. This is a great opportunity for an engineer with commercial heating appliance experience to join a longstanding family oriented business where you will play a key part in their growth and development. The Role: Commercial Gas Engineer Planned and reactive maintenance on commercial and residential properties Repairs and replacement of parts and boilers Covering work around Essex and West London 40,000 - 48,000 + Progression + Training + Established Company + Pension + Private Health Care + Van and Tools Provided + Potential Bonus + London Working Bonus (If you ever go into London) The Person : Current Commercial Gas Safe Qualifications (COCDNCO1, COCN1, TPCP1, CORT1 etc) Domestic Gas Qualifications (Desirable) Good communication skills Experience in maintenance and repairs of gas boilers Reference Number: BBBH(phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Nathan Williams at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.

My client, a leading FM contractor are seeking an experienced Commercial Gas Engineer to join their dynamic team in the building services sector. The successful candidate will be responsible for the maintenance, servicing, and repair of commercial boilers, pressure steam systems, and associated gas appliances across a range of sites, ensuring compliance with industry standards and regulations. This is an excellent opportunity for a skilled and qualified engineer looking for a stable, long-term role within a well-established company, offering career progression and further training opportunities. Duties Carry out planned preventative maintenance (PPM), servicing, and reactive repairs on commercial gas and heating systems, including boilers, pressure steam systems, pipework, pumps, and controls. Conduct fault diagnosis and rectification of gas and heating equipment to minimise downtime and ensure system efficiency. Ensure compliance with Gas Safety (Installation and Use) Regulations 1998 and other relevant health & safety legislation. Complete all necessary documentation and maintain accurate service records. Work closely with other engineers and subcontractors to ensure seamless service delivery. Participate in an on-call rota to provide emergency response services outside of normal working hours. Carry out minor installations and upgrade works as required. Provide excellent customer service and build strong client relationships. Skills & Experience Required Proven experience as a Commercial Gas Engineer within the building services or facilities maintenance industry. Strong technical knowledge of commercial boilers, pressure steam systems, and associated heating plant. Ability to carry out fault finding, diagnostics, and repairs efficiently. Good understanding of BMS (Building Management Systems) and control systems. Strong knowledge of health & safety regulations. Qualifications ACS Commercial Gas Qualifications (COCN1, CIGA1, CDGA1, CORT1, ICPN1) - Essential. Gas Safe Registration - Essential. NVQ Level 3 or City & Guilds in Mechanical Engineering, Plumbing, or Heating & Ventilation - Desirable. Steam Boiler Competency (BOAS/Spirax Sarco or equivalent) - Highly desirable. Full UK Driving Licence - Essential. Benefits Competitive salary with overtime opportunities. Company vehicle & fuel card. 25 days holiday + bank holidays. Pension scheme & life assurance. Further training & career progression opportunities. Support for additional qualifications and certifications. PPE and tools provided. Randstad CPE values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are more than happy to discuss reasonable adjustments and/or additional arrangements as required to support your application. Candidates must be eligible to live and work in the UK. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business.

Our client has a permanent opportunity for a Scientific Product Specialist. They provide automation and fluid control solutions for factory and laboratory applications. This is a National role, working remotely, with travel required. As a key member of their talented and successful products team this is an interesting, varied, and challenging customer-facing role that is designed to support increase their market share. Working closely with the field sales team you will provide application, product knowledge and sale support during customer visits. The range of product focus include chillers, heat exchangers, sensors, media separated valves, clean wet pumps, and process gas controls. To be considered you will need to demonstrate customer facing technical and sales experience. Key Responsibilities: Maintain accurate records of activities using our CRM system Grow sales of the product range through supporting the salesforce and their customers Understand and have the ability to use the value proposition of the product range responsible for and business value to grow sales. Identifying, researching, and gaining application knowledge for new opportunities for the product Promote the product range responsible for by creating marketing material, training material, and identifying trade shows where the range will achieve exposure. Develop strong working relationships with internal and external customers consulting with them to solve problems from a technical perspective. Meet and exceed targets. Skills and Experience: Desirable : A degree within a Science or Engineering discipline Required: HND or equivalent or relevant experience Proven track record of selling, specifying, or developing the product range of chillers, heat exchangers, sensors, media separated valves, clean wet pumps and process gas controls. Experience, skills and knowledge of the types of applications found in the non-invasive life science / medical / electronics industry, as these are the types of market areas, you will be working in. Demonstrate an ability to communicate and influence effectively at all levels of the business. Highly driven and passionate about making a difference within the industry. Proven track record of using value propositions to ensure customer satisfaction, increasing retention and customer loyalty to a brand. Full UK Driving Licence Current passport as European travel may be required. Due to the large number of responses we receive it is not always possible to respond to every application straight away. Should your skills and experience be a match for this role, or any other vacancy we may have, we will normally contact you within 72 hours of receiving your application. If you wish to apply for further roles please do so.

Our client has a permanent opportunity for a Scientific Product Specialist. They provide automation and fluid control solutions for factory and laboratory applications. This is a National role, working remotely, with travel required. As a key member of their talented and successful products team this is an interesting, varied, and challenging customer-facing role that is designed to support increase their market share. Working closely with the field sales team you will provide application, product knowledge and sale support during customer visits. The range of product focus include chillers, heat exchangers, sensors, media separated valves, clean wet pumps, and process gas controls. To be considered you will need to demonstrate customer facing technical and sales experience. Key Responsibilities: Maintain accurate records of activities using our CRM system Grow sales of the product range through supporting the salesforce and their customers Understand and have the ability to use the value proposition of the product range responsible for and business value to grow sales. Identifying, researching, and gaining application knowledge for new opportunities for the product Promote the product range responsible for by creating marketing material, training material, and identifying trade shows where the range will achieve exposure. Develop strong working relationships with internal and external customers consulting with them to solve problems from a technical perspective. Meet and exceed targets. Skills and Experience: Desirable : A degree within a Science or Engineering discipline Required: HND or equivalent or relevant experience Proven track record of selling, specifying, or developing the product range of chillers, heat exchangers, sensors, media separated valves, clean wet pumps and process gas controls. Experience, skills and knowledge of the types of applications found in the non-invasive life science / medical / electronics industry, as these are the types of market areas, you will be working in. Demonstrate an ability to communicate and influence effectively at all levels of the business. Highly driven and passionate about making a difference within the industry. Proven track record of using value propositions to ensure customer satisfaction, increasing retention and customer loyalty to a brand. Full UK Driving Licence Current passport as European travel may be required. Due to the large number of responses we receive it is not always possible to respond to every application straight away. Should your skills and experience be a match for this role, or any other vacancy we may have, we will normally contact you within 72 hours of receiving your application. If you wish to apply for further roles please do so.

Our client has a permanent opportunity for a Scientific Product Specialist. They provide automation and fluid control solutions for factory and laboratory applications. This is a National role, working remotely, with travel required. As a key member of their talented and successful products team this is an interesting, varied, and challenging customer-facing role that is designed to support increase their market share. Working closely with the field sales team you will provide application, product knowledge and sale support during customer visits. The range of product focus include chillers, heat exchangers, sensors, media separated valves, clean wet pumps, and process gas controls. To be considered you will need to demonstrate customer facing technical and sales experience. Key Responsibilities: Maintain accurate records of activities using our CRM system Grow sales of the product range through supporting the salesforce and their customers Understand and have the ability to use the value proposition of the product range responsible for and business value to grow sales. Identifying, researching, and gaining application knowledge for new opportunities for the product Promote the product range responsible for by creating marketing material, training material, and identifying trade shows where the range will achieve exposure. Develop strong working relationships with internal and external customers consulting with them to solve problems from a technical perspective. Meet and exceed targets. Skills and Experience: Desirable : A degree within a Science or Engineering discipline Required: HND or equivalent or relevant experience Proven track record of selling, specifying, or developing the product range of chillers, heat exchangers, sensors, media separated valves, clean wet pumps and process gas controls. Experience, skills and knowledge of the types of applications found in the non-invasive life science / medical / electronics industry, as these are the types of market areas, you will be working in. Demonstrate an ability to communicate and influence effectively at all levels of the business. Highly driven and passionate about making a difference within the industry. Proven track record of using value propositions to ensure customer satisfaction, increasing retention and customer loyalty to a brand. Full UK Driving Licence Current passport as European travel may be required. Due to the large number of responses we receive it is not always possible to respond to every application straight away. Should your skills and experience be a match for this role, or any other vacancy we may have, we will normally contact you within 72 hours of receiving your application. If you wish to apply for further roles please do so.